diff options
Diffstat (limited to 'drivers/tty/serial/arc_uart.c')
| -rw-r--r-- | drivers/tty/serial/arc_uart.c | 104 |
1 files changed, 68 insertions, 36 deletions
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index 3e0b3fac6a0e..d97e194b6bc5 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -37,6 +37,8 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_platform.h> /************************************* * ARC UART Hardware Specs @@ -209,12 +211,8 @@ static void arc_serial_start_tx(struct uart_port *port) static void arc_serial_rx_chars(struct arc_uart_port *uart) { - struct tty_struct *tty = tty_port_tty_get(&uart->port.state->port); unsigned int status, ch, flg = 0; - if (!tty) - return; - /* * UART has 4 deep RX-FIFO. Driver's recongnition of this fact * is very subtle. Here's how ... @@ -250,10 +248,8 @@ static void arc_serial_rx_chars(struct arc_uart_port *uart) uart_insert_char(&uart->port, status, RXOERR, ch, flg); done: - tty_flip_buffer_push(tty); + tty_flip_buffer_push(&uart->port.state->port); } - - tty_kref_put(tty); } /* @@ -526,18 +522,37 @@ static struct uart_ops arc_serial_pops = { }; static int -arc_uart_init_one(struct platform_device *pdev, struct arc_uart_port *uart) +arc_uart_init_one(struct platform_device *pdev, int dev_id) { struct resource *res, *res2; unsigned long *plat_data; - - if (pdev->id < 0 || pdev->id >= CONFIG_SERIAL_ARC_NR_PORTS) { - dev_err(&pdev->dev, "Wrong uart platform device id.\n"); - return -ENOENT; - } + struct arc_uart_port *uart = &arc_uart_ports[dev_id]; plat_data = ((unsigned long *)(pdev->dev.platform_data)); - uart->baud = plat_data[0]; + if (!plat_data) + return -ENODEV; + + uart->is_emulated = !!plat_data[0]; /* workaround ISS bug */ + + if (is_early_platform_device(pdev)) { + uart->port.uartclk = plat_data[1]; + uart->baud = plat_data[2]; + } else { + struct device_node *np = pdev->dev.of_node; + u32 val; + + if (of_property_read_u32(np, "clock-frequency", &val)) { + dev_err(&pdev->dev, "clock-frequency property NOTset\n"); + return -EINVAL; + } + uart->port.uartclk = val; + + if (of_property_read_u32(np, "current-speed", &val)) { + dev_err(&pdev->dev, "current-speed property NOT set\n"); + return -EINVAL; + } + uart->baud = val; + } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) @@ -557,10 +572,9 @@ arc_uart_init_one(struct platform_device *pdev, struct arc_uart_port *uart) uart->port.dev = &pdev->dev; uart->port.iotype = UPIO_MEM; uart->port.flags = UPF_BOOT_AUTOCONF; - uart->port.line = pdev->id; + uart->port.line = dev_id; uart->port.ops = &arc_serial_pops; - uart->port.uartclk = plat_data[1]; uart->port.fifosize = ARC_UART_TX_FIFO_SIZE; /* @@ -569,9 +583,6 @@ arc_uart_init_one(struct platform_device *pdev, struct arc_uart_port *uart) */ uart->port.ignore_status_mask = 0; - /* Real Hardware vs. emulated to work around a bug */ - uart->is_emulated = !!plat_data[2]; - return 0; } @@ -648,45 +659,50 @@ static __init void early_serial_write(struct console *con, const char *s, } } -static struct __initdata console arc_early_serial_console = { +static struct console arc_early_serial_console __initdata = { .name = "early_ARCuart", .write = early_serial_write, .flags = CON_PRINTBUFFER | CON_BOOT, .index = -1 }; -static int arc_serial_probe_earlyprintk(struct platform_device *pdev) +static int __init arc_serial_probe_earlyprintk(struct platform_device *pdev) { - arc_early_serial_console.index = pdev->id; + int dev_id = pdev->id < 0 ? 0 : pdev->id; + int rc; + + arc_early_serial_console.index = dev_id; - arc_uart_init_one(pdev, &arc_uart_ports[pdev->id]); + rc = arc_uart_init_one(pdev, dev_id); + if (rc) + panic("early console init failed\n"); arc_serial_console_setup(&arc_early_serial_console, NULL); register_console(&arc_early_serial_console); return 0; } -#else -static int arc_serial_probe_earlyprintk(struct platform_device *pdev) -{ - return -ENODEV; -} #endif /* CONFIG_SERIAL_ARC_CONSOLE */ static int arc_serial_probe(struct platform_device *pdev) { - struct arc_uart_port *uart; - int rc; + int rc, dev_id; + struct device_node *np = pdev->dev.of_node; + + /* no device tree device */ + if (!np) + return -ENODEV; - if (is_early_platform_device(pdev)) - return arc_serial_probe_earlyprintk(pdev); + dev_id = of_alias_get_id(np, "serial"); + if (dev_id < 0) + dev_id = 0; - uart = &arc_uart_ports[pdev->id]; - rc = arc_uart_init_one(pdev, uart); + rc = arc_uart_init_one(pdev, dev_id); if (rc) return rc; - return uart_add_one_port(&arc_uart_driver, &uart->port); + rc = uart_add_one_port(&arc_uart_driver, &arc_uart_ports[dev_id].port); + return rc; } static int arc_serial_remove(struct platform_device *pdev) @@ -695,16 +711,32 @@ static int arc_serial_remove(struct platform_device *pdev) return 0; } +static const struct of_device_id arc_uart_dt_ids[] = { + { .compatible = "snps,arc-uart" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, arc_uart_dt_ids); + static struct platform_driver arc_platform_driver = { .probe = arc_serial_probe, .remove = arc_serial_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, + .of_match_table = arc_uart_dt_ids, }, }; #ifdef CONFIG_SERIAL_ARC_CONSOLE + +static struct platform_driver early_arc_platform_driver __initdata = { + .probe = arc_serial_probe_earlyprintk, + .remove = arc_serial_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; /* * Register an early platform driver of "earlyprintk" class. * ARCH platform code installs the driver and probes the early devices @@ -712,7 +744,7 @@ static struct platform_driver arc_platform_driver = { * or it could be done independently, for all "earlyprintk" class drivers. * [see arch/arc/plat-arcfpga/platform.c] */ -early_platform_init("earlyprintk", &arc_platform_driver); +early_platform_init("earlyprintk", &early_arc_platform_driver); #endif /* CONFIG_SERIAL_ARC_CONSOLE */ |