diff options
Diffstat (limited to 'drivers/thermal')
30 files changed, 1534 insertions, 976 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 91af271e9bb0..3eb2348e5242 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -273,6 +273,16 @@ config IMX8MM_THERMAL cpufreq is used as the cooling device to throttle CPUs when the passive trip is crossed. +config K3_THERMAL + tristate "Texas Instruments K3 thermal support" + depends on ARCH_K3 || COMPILE_TEST + help + If you say yes here you get thermal support for the Texas Instruments + K3 SoC family. The current chip supported is: + - AM654 + + This includes temperature reading functionality. + config MAX77620_THERMAL tristate "Temperature sensor driver for Maxim MAX77620 PMIC" depends on MFD_MAX77620 @@ -285,8 +295,8 @@ config MAX77620_THERMAL config QORIQ_THERMAL tristate "QorIQ Thermal Monitoring Unit" - depends on THERMAL_OF - depends on HAS_IOMEM + depends on THERMAL_OF && HAS_IOMEM + depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || (ARCH_MXC && ARM64) || COMPILE_TEST select REGMAP_MMIO help Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms. diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 8c8ed7b79915..0c8b84a09b9a 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -9,14 +9,14 @@ thermal_sys-y += thermal_core.o thermal_sysfs.o \ # interface to/from other layers providing sensors thermal_sys-$(CONFIG_THERMAL_HWMON) += thermal_hwmon.o -thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o +thermal_sys-$(CONFIG_THERMAL_OF) += thermal_of.o # governors -thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o +thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += gov_fair_share.o thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o -thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o -thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o -thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += power_allocator.o +thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += gov_step_wise.o +thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += gov_user_space.o +thermal_sys-$(CONFIG_THERMAL_GOV_POWER_ALLOCATOR) += gov_power_allocator.o # cpufreq cooling thermal_sys-$(CONFIG_CPU_FREQ_THERMAL) += cpufreq_cooling.o @@ -28,6 +28,7 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o # devfreq cooling thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o +obj-$(CONFIG_K3_THERMAL) += k3_bandgap.o # platform thermal drivers obj-y += broadcom/ obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o diff --git a/drivers/thermal/clock_cooling.c b/drivers/thermal/clock_cooling.c index 7cb3ae4b44ee..56cb1f46a428 100644 --- a/drivers/thermal/clock_cooling.c +++ b/drivers/thermal/clock_cooling.c @@ -12,15 +12,16 @@ * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org> */ #include <linux/clk.h> +#include <linux/clock_cooling.h> #include <linux/cpufreq.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/idr.h> #include <linux/mutex.h> #include <linux/pm_opp.h> #include <linux/slab.h> #include <linux/thermal.h> -#include <linux/clock_cooling.h> /** * struct clock_cooling_device - data for cooling device with clock diff --git a/drivers/thermal/cpufreq_cooling.c b/drivers/thermal/cpufreq_cooling.c index e297e135c031..9e124020519f 100644 --- a/drivers/thermal/cpufreq_cooling.c +++ b/drivers/thermal/cpufreq_cooling.c @@ -10,17 +10,17 @@ * Viresh Kumar <viresh.kumar@linaro.org> * */ -#include <linux/module.h> -#include <linux/thermal.h> +#include <linux/cpu.h> #include <linux/cpufreq.h> +#include <linux/cpu_cooling.h> +#include <linux/energy_model.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/idr.h> #include <linux/pm_opp.h> #include <linux/pm_qos.h> #include <linux/slab.h> -#include <linux/cpu.h> -#include <linux/cpu_cooling.h> -#include <linux/energy_model.h> +#include <linux/thermal.h> #include <trace/events/thermal.h> diff --git a/drivers/thermal/cpuidle_cooling.c b/drivers/thermal/cpuidle_cooling.c index 0bb843246f59..78e3e8238116 100644 --- a/drivers/thermal/cpuidle_cooling.c +++ b/drivers/thermal/cpuidle_cooling.c @@ -5,11 +5,14 @@ * Author: Daniel Lezcano <daniel.lezcano@linaro.org> * */ +#define pr_fmt(fmt) "cpuidle cooling: " fmt + #include <linux/cpu_cooling.h> #include <linux/cpuidle.h> #include <linux/err.h> #include <linux/idle_inject.h> #include <linux/idr.h> +#include <linux/of_device.h> #include <linux/slab.h> #include <linux/thermal.h> @@ -154,22 +157,25 @@ static struct thermal_cooling_device_ops cpuidle_cooling_ops = { }; /** - * cpuidle_of_cooling_register - Idle cooling device initialization function + * __cpuidle_cooling_register: register the cooling device * @drv: a cpuidle driver structure pointer - * @np: a node pointer to a device tree cooling device node + * @np: a device node structure pointer used for the thermal binding * - * This function is in charge of creating a cooling device per cpuidle - * driver and register it to thermal framework. + * This function is in charge of allocating the cpuidle cooling device + * structure, the idle injection, initialize them and register the + * cooling device to the thermal framework. * - * Return: zero on success, or negative value corresponding to the - * error detected in the underlying subsystems. + * Return: zero on success, a negative value returned by one of the + * underlying subsystem in case of error */ -int cpuidle_of_cooling_register(struct device_node *np, - struct cpuidle_driver *drv) +static int __cpuidle_cooling_register(struct device_node *np, + struct cpuidle_driver *drv) { struct idle_inject_device *ii_dev; struct cpuidle_cooling_device *idle_cdev; struct thermal_cooling_device *cdev; + unsigned int idle_duration_us = TICK_USEC; + unsigned int latency_us = UINT_MAX; char dev_name[THERMAL_NAME_LENGTH]; int id, ret; @@ -191,7 +197,11 @@ int cpuidle_of_cooling_register(struct device_node *np, goto out_id; } - idle_inject_set_duration(ii_dev, TICK_USEC, TICK_USEC); + of_property_read_u32(np, "duration-us", &idle_duration_us); + of_property_read_u32(np, "exit-latency-us", &latency_us); + + idle_inject_set_duration(ii_dev, TICK_USEC, idle_duration_us); + idle_inject_set_latency(ii_dev, latency_us); idle_cdev->ii_dev = ii_dev; @@ -204,6 +214,9 @@ int cpuidle_of_cooling_register(struct device_node *np, goto out_unregister; } + pr_debug("%s: Idle injection set with idle duration=%u, latency=%u\n", + dev_name, idle_duration_us, latency_us); + return 0; out_unregister: @@ -221,12 +234,38 @@ out: * @drv: a cpuidle driver structure pointer * * This function is in charge of creating a cooling device per cpuidle - * driver and register it to thermal framework. + * driver and register it to the thermal framework. * * Return: zero on success, or negative value corresponding to the * error detected in the underlying subsystems. */ -int cpuidle_cooling_register(struct cpuidle_driver *drv) +void cpuidle_cooling_register(struct cpuidle_driver *drv) { - return cpuidle_of_cooling_register(NULL, drv); + struct device_node *cooling_node; + struct device_node *cpu_node; + int cpu, ret; + + for_each_cpu(cpu, drv->cpumask) { + + cpu_node = of_cpu_device_node_get(cpu); + + cooling_node = of_get_child_by_name(cpu_node, "thermal-idle"); + + of_node_put(cpu_node); + + if (!cooling_node) { + pr_debug("'thermal-idle' node not found for cpu%d\n", cpu); + continue; + } + + ret = __cpuidle_cooling_register(cooling_node, drv); + + of_node_put(cooling_node); + + if (ret) { + pr_err("Failed to register the cpuidle cooling device" \ + "for cpu%d: %d\n", cpu, ret); + break; + } + } } diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c index a87d4fa031c8..f7f32e98331b 100644 --- a/drivers/thermal/devfreq_cooling.c +++ b/drivers/thermal/devfreq_cooling.c @@ -24,11 +24,13 @@ #include <linux/idr.h> #include <linux/slab.h> #include <linux/pm_opp.h> +#include <linux/pm_qos.h> #include <linux/thermal.h> #include <trace/events/thermal.h> -#define SCALE_ERROR_MITIGATION 100 +#define HZ_PER_KHZ 1000 +#define SCALE_ERROR_MITIGATION 100 static DEFINE_IDA(devfreq_ida); @@ -54,6 +56,8 @@ static DEFINE_IDA(devfreq_ida); * The 'res_util' range is from 100 to (power_table[state] * 100) * for the corresponding 'state'. * @capped_state: index to cooling state with in dynamic power budget + * @req_max_freq: PM QoS request for limiting the maximum frequency + * of the devfreq device. */ struct devfreq_cooling_device { int id; @@ -66,49 +70,9 @@ struct devfreq_cooling_device { struct devfreq_cooling_power *power_ops; u32 res_util; int capped_state; + struct dev_pm_qos_request req_max_freq; }; -/** - * partition_enable_opps() - disable all opps above a given state - * @dfc: Pointer to devfreq we are operating on - * @cdev_state: cooling device state we're setting - * - * Go through the OPPs of the device, enabling all OPPs until - * @cdev_state and disabling those frequencies above it. - */ -static int partition_enable_opps(struct devfreq_cooling_device *dfc, - unsigned long cdev_state) -{ - int i; - struct device *dev = dfc->devfreq->dev.parent; - - for (i = 0; i < dfc->freq_table_size; i++) { - struct dev_pm_opp *opp; - int ret = 0; - unsigned int freq = dfc->freq_table[i]; - bool want_enable = i >= cdev_state ? true : false; - - opp = dev_pm_opp_find_freq_exact(dev, freq, !want_enable); - - if (PTR_ERR(opp) == -ERANGE) - continue; - else if (IS_ERR(opp)) - return PTR_ERR(opp); - - dev_pm_opp_put(opp); - - if (want_enable) - ret = dev_pm_opp_enable(dev, freq); - else - ret = dev_pm_opp_disable(dev, freq); - - if (ret) - return ret; - } - - return 0; -} - static int devfreq_cooling_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) { @@ -135,7 +99,7 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev, struct devfreq_cooling_device *dfc = cdev->devdata; struct devfreq *df = dfc->devfreq; struct device *dev = df->dev.parent; - int ret; + unsigned long freq; if (state == dfc->cooling_state) return 0; @@ -145,9 +109,10 @@ static int devfreq_cooling_set_cur_state(struct thermal_cooling_device *cdev, if (state >= dfc->freq_table_size) return -EINVAL; - ret = partition_enable_opps(dfc, state); - if (ret) - return ret; + freq = dfc->freq_table[state]; + + dev_pm_qos_update_request(&dfc->req_max_freq, + DIV_ROUND_UP(freq, HZ_PER_KHZ)); dfc->cooling_state = state; @@ -530,9 +495,15 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, if (err) goto free_dfc; - err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL); + err = dev_pm_qos_add_request(df->dev.parent, &dfc->req_max_freq, + DEV_PM_QOS_MAX_FREQUENCY, + PM_QOS_MAX_FREQUENCY_DEFAULT_VALUE); if (err < 0) goto free_tables; + + err = ida_simple_get(&devfreq_ida, 0, 0, GFP_KERNEL); + if (err < 0) + goto remove_qos_req; dfc->id = err; snprintf(dev_name, sizeof(dev_name), "thermal-devfreq-%d", dfc->id); @@ -553,6 +524,10 @@ of_devfreq_cooling_register_power(struct device_node *np, struct devfreq *df, release_ida: ida_simple_remove(&devfreq_ida, dfc->id); + +remove_qos_req: + dev_pm_qos_remove_request(&dfc->req_max_freq); + free_tables: kfree(dfc->power_table); kfree(dfc->freq_table); @@ -601,6 +576,7 @@ void devfreq_cooling_unregister(struct thermal_cooling_device *cdev) thermal_cooling_device_unregister(dfc->cdev); ida_simple_remove(&devfreq_ida, dfc->id); + dev_pm_qos_remove_request(&dfc->req_max_freq); kfree(dfc->power_table); kfree(dfc->freq_table); diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/gov_fair_share.c index aaa07180ab48..aaa07180ab48 100644 --- a/drivers/thermal/fair_share.c +++ b/drivers/thermal/gov_fair_share.c diff --git a/drivers/thermal/power_allocator.c b/drivers/thermal/gov_power_allocator.c index 44636475b2a3..44636475b2a3 100644 --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/gov_power_allocator.c diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/gov_step_wise.c index 2ae7198d3067..2ae7198d3067 100644 --- a/drivers/thermal/step_wise.c +++ b/drivers/thermal/gov_step_wise.c diff --git a/drivers/thermal/user_space.c b/drivers/thermal/gov_user_space.c index 293cffd9c8ad..82a7198bbe71 100644 --- a/drivers/thermal/user_space.c +++ b/drivers/thermal/gov_user_space.c @@ -10,8 +10,8 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ -#include <linux/thermal.h> #include <linux/slab.h> +#include <linux/thermal.h> #include "thermal_core.h" diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c index 0d60f8d7894f..e6061e26d4ac 100644 --- a/drivers/thermal/imx8mm_thermal.c +++ b/drivers/thermal/imx8mm_thermal.c @@ -54,7 +54,7 @@ struct imx8mm_tmu { void __iomem *base; struct clk *clk; const struct thermal_soc_data *socdata; - struct tmu_sensor sensors[0]; + struct tmu_sensor sensors[]; }; static int imx8mm_tmu_get_temp(void *data, int *temp) diff --git a/drivers/thermal/imx_sc_thermal.c b/drivers/thermal/imx_sc_thermal.c index 8938ea81a525..b01d28eca7ee 100644 --- a/drivers/thermal/imx_sc_thermal.c +++ b/drivers/thermal/imx_sc_thermal.c @@ -14,6 +14,7 @@ #include <linux/thermal.h> #include "thermal_core.h" +#include "thermal_hwmon.h" #define IMX_SC_MISC_FUNC_GET_TEMP 13 @@ -115,6 +116,9 @@ static int imx_sc_thermal_probe(struct platform_device *pdev) ret = PTR_ERR(sensor->tzd); break; } + + if (devm_thermal_add_hwmon_sysfs(sensor->tzd)) + dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n"); } of_node_put(sensor_np); diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c index ceef89c956bd..0b3a62655843 100644 --- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c @@ -13,6 +13,7 @@ #include "acpi_thermal_rel.h" #define INT3400_THERMAL_TABLE_CHANGED 0x83 +#define INT3400_ODVP_CHANGED 0x88 enum int3400_thermal_uuid { INT3400_THERMAL_PASSIVE_1, @@ -41,8 +42,11 @@ static char *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = { "BE84BABF-C4D4-403D-B495-3128FD44dAC1", }; +struct odvp_attr; + struct int3400_thermal_priv { struct acpi_device *adev; + struct platform_device *pdev; struct thermal_zone_device *thermal; int mode; int art_count; @@ -52,6 +56,36 @@ struct int3400_thermal_priv { u8 uuid_bitmap; int rel_misc_dev_res; int current_uuid_index; + char *data_vault; + int odvp_count; + int *odvp; + struct odvp_attr *odvp_attrs; +}; + +static int evaluate_odvp(struct int3400_thermal_priv *priv); + +struct odvp_attr { + int odvp; + struct int3400_thermal_priv *priv; + struct kobj_attribute attr; +}; + +static ssize_t data_vault_read(struct file *file, struct kobject *kobj, + struct bin_attribute *attr, char *buf, loff_t off, size_t count) +{ + memcpy(buf, attr->private + off, count); + return count; +} + +static BIN_ATTR_RO(data_vault, 0); + +static struct bin_attribute *data_attributes[] = { + &bin_attr_data_vault, + NULL, +}; + +static const struct attribute_group data_attribute_group = { + .bin_attrs = data_attributes, }; static ssize_t available_uuids_show(struct device *dev, @@ -62,6 +96,9 @@ static ssize_t available_uuids_show(struct device *dev, int i; int length = 0; + if (!priv->uuid_bitmap) + return sprintf(buf, "UNKNOWN\n"); + for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; i++) { if (priv->uuid_bitmap & (1 << i)) if (PAGE_SIZE - length > 0) @@ -79,11 +116,11 @@ static ssize_t current_uuid_show(struct device *dev, { struct int3400_thermal_priv *priv = dev_get_drvdata(dev); - if (priv->uuid_bitmap & (1 << priv->current_uuid_index)) - return sprintf(buf, "%s\n", - int3400_thermal_uuids[priv->current_uuid_index]); - else + if (priv->current_uuid_index == -1) return sprintf(buf, "INVALID\n"); + + return sprintf(buf, "%s\n", + int3400_thermal_uuids[priv->current_uuid_index]); } static ssize_t current_uuid_store(struct device *dev, @@ -94,9 +131,16 @@ static ssize_t current_uuid_store(struct device *dev, int i; for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; ++i) { - if ((priv->uuid_bitmap & (1 << i)) && - !(strncmp(buf, int3400_thermal_uuids[i], - sizeof(int3400_thermal_uuids[i]) - 1))) { + if (!strncmp(buf, int3400_thermal_uuids[i], + sizeof(int3400_thermal_uuids[i]) - 1)) { + /* + * If we have a list of supported UUIDs, make sure + * this one is supported. + */ + if (priv->uuid_bitmap && + !(priv->uuid_bitmap & (1 << i))) + return -EINVAL; + priv->current_uuid_index = i; return count; } @@ -191,9 +235,110 @@ static int int3400_thermal_run_osc(acpi_handle handle, result = -EPERM; kfree(context.ret.pointer); + return result; } +static ssize_t odvp_show(struct kobject *kobj, struct kobj_attribute *attr, + char *buf) +{ + struct odvp_attr *odvp_attr; + + odvp_attr = container_of(attr, struct odvp_attr, attr); + + return sprintf(buf, "%d\n", odvp_attr->priv->odvp[odvp_attr->odvp]); +} + +static void cleanup_odvp(struct int3400_thermal_priv *priv) +{ + int i; + + if (priv->odvp_attrs) { + for (i = 0; i < priv->odvp_count; i++) { + sysfs_remove_file(&priv->pdev->dev.kobj, + &priv->odvp_attrs[i].attr.attr); + kfree(priv->odvp_attrs[i].attr.attr.name); + } + kfree(priv->odvp_attrs); + } + kfree(priv->odvp); + priv->odvp_count = 0; +} + +static int evaluate_odvp(struct int3400_thermal_priv *priv) +{ + struct acpi_buffer odvp = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj = NULL; + acpi_status status; + int i, ret; + + status = acpi_evaluate_object(priv->adev->handle, "ODVP", NULL, &odvp); + if (ACPI_FAILURE(status)) { + ret = -EINVAL; + goto out_err; + } + + obj = odvp.pointer; + if (obj->type != ACPI_TYPE_PACKAGE) { + ret = -EINVAL; + goto out_err; + } + + if (priv->odvp == NULL) { + priv->odvp_count = obj->package.count; + priv->odvp = kmalloc_array(priv->odvp_count, sizeof(int), + GFP_KERNEL); + if (!priv->odvp) { + ret = -ENOMEM; + goto out_err; + } + } + + if (priv->odvp_attrs == NULL) { + priv->odvp_attrs = kcalloc(priv->odvp_count, + sizeof(struct odvp_attr), + GFP_KERNEL); + if (!priv->odvp_attrs) { + ret = -ENOMEM; + goto out_err; + } + for (i = 0; i < priv->odvp_count; i++) { + struct odvp_attr *odvp = &priv->odvp_attrs[i]; + + sysfs_attr_init(&odvp->attr.attr); + odvp->priv = priv; + odvp->odvp = i; + odvp->attr.attr.name = kasprintf(GFP_KERNEL, + "odvp%d", i); + + if (!odvp->attr.attr.name) { + ret = -ENOMEM; + goto out_err; + } + odvp->attr.attr.mode = 0444; + odvp->attr.show = odvp_show; + odvp->attr.store = NULL; + ret = sysfs_create_file(&priv->pdev->dev.kobj, + &odvp->attr.attr); + if (ret) + goto out_err; + } + } + + for (i = 0; i < obj->package.count; i++) { + if (obj->package.elements[i].type == ACPI_TYPE_INTEGER) + priv->odvp[i] = obj->package.elements[i].integer.value; + } + + kfree(obj); + return 0; + +out_err: + cleanup_odvp(priv); + kfree(obj); + return ret; +} + static void int3400_notify(acpi_handle handle, u32 event, void *data) @@ -217,6 +362,9 @@ static void int3400_notify(acpi_handle handle, kobject_uevent_env(&priv->thermal->device.kobj, KOBJ_CHANGE, thermal_prop); break; + case INT3400_ODVP_CHANGED: + evaluate_odvp(priv); + break; default: /* Ignore unknown notification codes sent to INT3400 device */ break; @@ -266,11 +414,16 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, priv->current_uuid_index, enable); } + + evaluate_odvp(priv); + return result; } static struct thermal_zone_device_ops int3400_thermal_ops = { .get_temp = int3400_thermal_get_temp, + .get_mode = int3400_thermal_get_mode, + .set_mode = int3400_thermal_set_mode, }; static struct thermal_zone_params int3400_thermal_params = { @@ -278,6 +431,32 @@ static struct thermal_zone_params int3400_thermal_params = { .no_hwmon = true, }; +static void int3400_setup_gddv(struct int3400_thermal_priv *priv) +{ + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *obj; + acpi_status status; + + status = acpi_evaluate_object(priv->adev->handle, "GDDV", NULL, + &buffer); + if (ACPI_FAILURE(status) || !buffer.length) + return; + + obj = buffer.pointer; + if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 1 + || obj->package.elements[0].type != ACPI_TYPE_BUFFER) { + kfree(buffer.pointer); + return; + } + + priv->data_vault = kmemdup(obj->package.elements[0].buffer.pointer, + obj->package.elements[0].buffer.length, + GFP_KERNEL); + bin_attr_data_vault.private = priv->data_vault; + bin_attr_data_vault.size = obj->package.elements[0].buffer.length; + kfree(buffer.pointer); +} + static int int3400_thermal_probe(struct platform_device *pdev) { struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); @@ -291,12 +470,17 @@ static int int3400_thermal_probe(struct platform_device *pdev) if (!priv) return -ENOMEM; + priv->pdev = pdev; priv->adev = adev; result = int3400_thermal_get_uuids(priv); - if (result) + + /* Missing IDSP isn't fatal */ + if (result && result != -ENODEV) goto free_priv; + priv->current_uuid_index = -1; + result = acpi_parse_art(priv->adev->handle, &priv->art_count, &priv->arts, true); if (result) @@ -309,8 +493,9 @@ static int int3400_thermal_probe(struct platform_device *pdev) platform_set_drvdata(pdev, priv); - int3400_thermal_ops.get_mode = int3400_thermal_get_mode; - int3400_thermal_ops.set_mode = int3400_thermal_set_mode; + int3400_setup_gddv(priv); + + evaluate_odvp(priv); priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0, priv, &int3400_thermal_ops, @@ -327,6 +512,13 @@ static int int3400_thermal_probe(struct platform_device *pdev) if (result) goto free_rel_misc; + if (priv->data_vault) { + result = sysfs_create_group(&pdev->dev.kobj, + &data_attribute_group); + if (result) + goto free_uuid; + } + result = acpi_install_notify_handler( priv->adev->handle, ACPI_DEVICE_NOTIFY, int3400_notify, (void *)priv); @@ -336,6 +528,12 @@ static int int3400_thermal_probe(struct platform_device *pdev) return 0; free_sysfs: + cleanup_odvp(priv); + if (priv->data_vault) { + sysfs_remove_group(&pdev->dev.kobj, &data_attribute_group); + kfree(priv->data_vault); + } +free_uuid: sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group); free_rel_misc: if (!priv->rel_misc_dev_res) @@ -357,11 +555,16 @@ static int int3400_thermal_remove(struct platform_device *pdev) priv->adev->handle, ACPI_DEVICE_NOTIFY, int3400_notify); + cleanup_odvp(priv); + if (!priv->rel_misc_dev_res) acpi_thermal_rel_misc_device_remove(priv->adev->handle); + if (priv->data_vault) + sysfs_remove_group(&pdev->dev.kobj, &data_attribute_group); sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group); thermal_zone_device_unregister(priv->thermal); + kfree(priv->data_vault); kfree(priv->trts); kfree(priv->arts); kfree(priv); diff --git a/drivers/thermal/k3_bandgap.c b/drivers/thermal/k3_bandgap.c new file mode 100644 index 000000000000..35f41e8a0b75 --- /dev/null +++ b/drivers/thermal/k3_bandgap.c @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * TI Bandgap temperature sensor driver for K3 SoC Family + * + * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/pm_runtime.h> +#include <linux/thermal.h> +#include <linux/types.h> + +#define K3_VTM_DEVINFO_PWR0_OFFSET 0x4 +#define K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK 0xf0 +#define K3_VTM_TMPSENS0_CTRL_OFFSET 0x80 +#define K3_VTM_REGS_PER_TS 0x10 +#define K3_VTM_TS_STAT_DTEMP_MASK 0x3ff +#define K3_VTM_TMPSENS_CTRL_CBIASSEL BIT(0) +#define K3_VTM_TMPSENS_CTRL_SOC BIT(5) +#define K3_VTM_TMPSENS_CTRL_CLRZ BIT(6) +#define K3_VTM_TMPSENS_CTRL_CLKON_REQ BIT(7) + +#define K3_VTM_ADC_BEGIN_VAL 540 +#define K3_VTM_ADC_END_VAL 944 + +static const int k3_adc_to_temp[] = { + -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200, + -37800, -37400, -37000, -36600, -36200, -35800, -35300, -34700, -34200, + -33800, -33400, -33000, -32600, -32200, -31800, -31400, -31000, -30600, + -30200, -29800, -29400, -29000, -28600, -28200, -27700, -27100, -26600, + -26200, -25800, -25400, -25000, -24600, -24200, -23800, -23400, -23000, + -22600, -22200, -21800, -21400, -21000, -20500, -19900, -19400, -19000, + -18600, -18200, -17800, -17400, -17000, -16600, -16200, -15800, -15400, + -15000, -14600, -14200, -13800, -13400, -13000, -12500, -11900, -11400, + -11000, -10600, -10200, -9800, -9400, -9000, -8600, -8200, -7800, -7400, + -7000, -6600, -6200, -5800, -5400, -5000, -4500, -3900, -3400, -3000, + -2600, -2200, -1800, -1400, -1000, -600, -200, 200, 600, 1000, 1400, + 1800, 2200, 2600, 3000, 3400, 3900, 4500, 5000, 5400, 5800, 6200, 6600, + 7000, 7400, 7800, 8200, 8600, 9000, 9400, 9800, 10200, 10600, 11000, + 11400, 11800, 12200, 12700, 13300, 13800, 14200, 14600, 15000, 15400, + 15800, 16200, 16600, 17000, 17400, 17800, 18200, 18600, 19000, 19400, + 19800, 20200, 20600, 21000, 21400, 21900, 22500, 23000, 23400, 23800, + 24200, 24600, 25000, 25400, 25800, 26200, 26600, 27000, 27400, 27800, + 28200, 28600, 29000, 29400, 29800, 30200, 30600, 31000, 31400, 31900, + 32500, 33000, 33400, 33800, 34200, 34600, 35000, 35400, 35800, 36200, + 36600, 37000, 37400, 37800, 38200, 38600, 39000, 39400, 39800, 40200, + 40600, 41000, 41400, 41800, 42200, 42600, 43100, 43700, 44200, 44600, + 45000, 45400, 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600, + 49000, 49400, 49800, 50200, 50600, 51000, 51400, 51800, 52200, 52600, + 53000, 53400, 53800, 54200, 54600, 55000, 55400, 55900, 56500, 57000, + 57400, 57800, 58200, 58600, 59000, 59400, 59800, 60200, 60600, 61000, + 61400, 61800, 62200, 62600, 63000, 63400, 63800, 64200, 64600, 65000, + 65400, 65800, 66200, 66600, 67000, 67400, 67800, 68200, 68600, 69000, + 69400, 69800, 70200, 70600, 71000, 71500, 72100, 72600, 73000, 73400, + 73800, 74200, 74600, 75000, 75400, 75800, 76200, 76600, 77000, 77400, + 77800, 78200, 78600, 79000, 79400, 79800, 80200, 80600, 81000, 81400, + 81800, 82200, 82600, 83000, 83400, 83800, 84200, 84600, 85000, 85400, + 85800, 86200, 86600, 87000, 87400, 87800, 88200, 88600, 89000, 89400, + 89800, 90200, 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400, + 93800, 94200, 94600, 95000, 95400, 95800, 96200, 96600, 97000, 97500, + 98100, 98600, 99000, 99400, 99800, 100200, 100600, 101000, 101400, + 101800, 102200, 102600, 103000, 103400, 103800, 104200, 104600, 105000, + 105400, 105800, 106200, 106600, 107000, 107400, 107800, 108200, 108600, + 109000, 109400, 109800, 110200, 110600, 111000, 111400, 111800, 112200, + 112600, 113000, 113400, 113800, 114200, 114600, 115000, 115400, 115800, + 116200, 116600, 117000, 117400, 117800, 118200, 118600, 119000, 119400, + 119800, 120200, 120600, 121000, 121400, 121800, 122200, 122600, 123000, + 123400, 123800, 124200, 124600, 124900, 125000, +}; + +struct k3_bandgap { + void __iomem *base; + const struct k3_bandgap_data *conf; +}; + +/* common data structures */ +struct k3_thermal_data { + struct thermal_zone_device *tzd; + struct k3_bandgap *bgp; + int sensor_id; + u32 ctrl_offset; + u32 stat_offset; +}; + +static unsigned int vtm_get_best_value(unsigned int s0, unsigned int s1, + unsigned int s2) +{ + int d01 = abs(s0 - s1); + int d02 = abs(s0 - s2); + int d12 = abs(s1 - s2); + + if (d01 <= d02 && d01 <= d12) + return (s0 + s1) / 2; + + if (d02 <= d01 && d02 <= d12) + return (s0 + s2) / 2; + + return (s1 + s2) / 2; +} + +static int k3_bgp_read_temp(struct k3_thermal_data *devdata, + int *temp) +{ + struct k3_bandgap *bgp; + unsigned int dtemp, s0, s1, s2; + + bgp = devdata->bgp; + + /* + * Errata is applicable for am654 pg 1.0 silicon. There + * is a variation of the order for 8-10 degree centigrade. + * Work around that by getting the average of two closest + * readings out of three readings everytime we want to + * report temperatures. + * + * Errata workaround. + */ + s0 = readl(bgp->base + devdata->stat_offset) & + K3_VTM_TS_STAT_DTEMP_MASK; + s1 = readl(bgp->base + devdata->stat_offset) & + K3_VTM_TS_STAT_DTEMP_MASK; + s2 = readl(bgp->base + devdata->stat_offset) & + K3_VTM_TS_STAT_DTEMP_MASK; + dtemp = vtm_get_best_value(s0, s1, s2); + + if (dtemp < K3_VTM_ADC_BEGIN_VAL || dtemp > K3_VTM_ADC_END_VAL) + return -EINVAL; + + *temp = k3_adc_to_temp[dtemp - K3_VTM_ADC_BEGIN_VAL]; + + return 0; +} + +static int k3_thermal_get_temp(void *devdata, int *temp) +{ + struct k3_thermal_data *data = devdata; + int ret = 0; + + ret = k3_bgp_read_temp(data, temp); + if (ret) + return ret; + + return ret; +} + +static const struct thermal_zone_of_device_ops k3_of_thermal_ops = { + .get_temp = k3_thermal_get_temp, +}; + +static const struct of_device_id of_k3_bandgap_match[]; + +static int k3_bandgap_probe(struct platform_device *pdev) +{ + int ret = 0, cnt, val, id; + struct resource *res; + struct device *dev = &pdev->dev; + struct k3_bandgap *bgp; + struct k3_thermal_data *data; + + if (ARRAY_SIZE(k3_adc_to_temp) != (K3_VTM_ADC_END_VAL + 1 - + K3_VTM_ADC_BEGIN_VAL)) + return -EINVAL; + + bgp = devm_kzalloc(&pdev->dev, sizeof(*bgp), GFP_KERNEL); + if (!bgp) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + bgp->base = devm_ioremap_resource(dev, res); + if (IS_ERR(bgp->base)) + return PTR_ERR(bgp->base); + + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + pm_runtime_disable(dev); + return ret; + } + + /* Get the sensor count in the VTM */ + val = readl(bgp->base + K3_VTM_DEVINFO_PWR0_OFFSET); + cnt = val & K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK; + cnt >>= __ffs(K3_VTM_DEVINFO_PWR0_TEMPSENS_CT_MASK); + + data = devm_kcalloc(dev, cnt, sizeof(*data), GFP_KERNEL); + if (!data) { + ret = -ENOMEM; + goto err_alloc; + } + + /* Register the thermal sensors */ + for (id = 0; id < cnt; id++) { + data[id].sensor_id = id; + data[id].bgp = bgp; + data[id].ctrl_offset = K3_VTM_TMPSENS0_CTRL_OFFSET + + id * K3_VTM_REGS_PER_TS; + data[id].stat_offset = data[id].ctrl_offset + 0x8; + + val = readl(data[id].bgp->base + data[id].ctrl_offset); + val |= (K3_VTM_TMPSENS_CTRL_SOC | + K3_VTM_TMPSENS_CTRL_CLRZ | + K3_VTM_TMPSENS_CTRL_CLKON_REQ); + val &= ~K3_VTM_TMPSENS_CTRL_CBIASSEL; + writel(val, data[id].bgp->base + data[id].ctrl_offset); + + data[id].tzd = + devm_thermal_zone_of_sensor_register(dev, id, + &data[id], + &k3_of_thermal_ops); + if (IS_ERR(data[id].tzd)) { + dev_err(dev, "thermal zone device is NULL\n"); + ret = PTR_ERR(data[id].tzd); + goto err_alloc; + } + } + + platform_set_drvdata(pdev, bgp); + + return 0; + +err_alloc: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + + return ret; +} + +static int k3_bandgap_remove(struct platform_device *pdev) +{ + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +static const struct of_device_id of_k3_bandgap_match[] = { + { + .compatible = "ti,am654-vtm", + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, of_k3_bandgap_match); + +static struct platform_driver k3_bandgap_sensor_driver = { + .probe = k3_bandgap_probe, + .remove = k3_bandgap_remove, + .driver = { + .name = "k3-soc-thermal", + .of_match_table = of_k3_bandgap_match, + }, +}; + +module_platform_driver(k3_bandgap_sensor_driver); + +MODULE_DESCRIPTION("K3 bandgap temperature sensor driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>"); diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile index 7c8dc6e36693..ec86eef7f6a6 100644 --- a/drivers/thermal/qcom/Makefile +++ b/drivers/thermal/qcom/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o -qcom_tsens-y += tsens.o tsens-common.o tsens-v0_1.o \ - tsens-8960.o tsens-v2.o tsens-v1.o +qcom_tsens-y += tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \ + tsens-8960.o obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c deleted file mode 100644 index 172545366636..000000000000 --- a/drivers/thermal/qcom/tsens-common.c +++ /dev/null @@ -1,843 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2015, The Linux Foundation. All rights reserved. - */ - -#include <linux/debugfs.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/nvmem-consumer.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <linux/platform_device.h> -#include <linux/regmap.h> -#include "tsens.h" - -/** - * struct tsens_irq_data - IRQ status and temperature violations - * @up_viol: upper threshold violated - * @up_thresh: upper threshold temperature value - * @up_irq_mask: mask register for upper threshold irqs - * @up_irq_clear: clear register for uppper threshold irqs - * @low_viol: lower threshold violated - * @low_thresh: lower threshold temperature value - * @low_irq_mask: mask register for lower threshold irqs - * @low_irq_clear: clear register for lower threshold irqs - * @crit_viol: critical threshold violated - * @crit_thresh: critical threshold temperature value - * @crit_irq_mask: mask register for critical threshold irqs - * @crit_irq_clear: clear register for critical threshold irqs - * - * Structure containing data about temperature threshold settings and - * irq status if they were violated. - */ -struct tsens_irq_data { - u32 up_viol; - int up_thresh; - u32 up_irq_mask; - u32 up_irq_clear; - u32 low_viol; - int low_thresh; - u32 low_irq_mask; - u32 low_irq_clear; - u32 crit_viol; - u32 crit_thresh; - u32 crit_irq_mask; - u32 crit_irq_clear; -}; - -char *qfprom_read(struct device *dev, const char *cname) -{ - struct nvmem_cell *cell; - ssize_t data; - char *ret; - - cell = nvmem_cell_get(dev, cname); - if (IS_ERR(cell)) - return ERR_CAST(cell); - - ret = nvmem_cell_read(cell, &data); - nvmem_cell_put(cell); - - return ret; -} - -/* - * Use this function on devices where slope and offset calculations - * depend on calibration data read from qfprom. On others the slope - * and offset values are derived from tz->tzp->slope and tz->tzp->offset - * resp. - */ -void compute_intercept_slope(struct tsens_priv *priv, u32 *p1, - u32 *p2, u32 mode) -{ - int i; - int num, den; - - for (i = 0; i < priv->num_sensors; i++) { - dev_dbg(priv->dev, - "%s: sensor%d - data_point1:%#x data_point2:%#x\n", - __func__, i, p1[i], p2[i]); - - priv->sensor[i].slope = SLOPE_DEFAULT; - if (mode == TWO_PT_CALIB) { - /* - * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ - * temp_120_degc - temp_30_degc (x2 - x1) - */ - num = p2[i] - p1[i]; - num *= SLOPE_FACTOR; - den = CAL_DEGC_PT2 - CAL_DEGC_PT1; - priv->sensor[i].slope = num / den; - } - - priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - - (CAL_DEGC_PT1 * - priv->sensor[i].slope); - dev_dbg(priv->dev, "%s: offset:%d\n", __func__, priv->sensor[i].offset); - } -} - -static inline u32 degc_to_code(int degc, const struct tsens_sensor *s) -{ - u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR); - - pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc); - return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE); -} - -static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) -{ - int degc, num, den; - - num = (adc_code * SLOPE_FACTOR) - s->offset; - den = s->slope; - - if (num > 0) - degc = num + (den / 2); - else if (num < 0) - degc = num - (den / 2); - else - degc = num; - - degc /= den; - - return degc; -} - -/** - * tsens_hw_to_mC - Return sign-extended temperature in mCelsius. - * @s: Pointer to sensor struct - * @field: Index into regmap_field array pointing to temperature data - * - * This function handles temperature returned in ADC code or deciCelsius - * depending on IP version. - * - * Return: Temperature in milliCelsius on success, a negative errno will - * be returned in error cases - */ -static int tsens_hw_to_mC(const struct tsens_sensor *s, int field) -{ - struct tsens_priv *priv = s->priv; - u32 resolution; - u32 temp = 0; - int ret; - - resolution = priv->fields[LAST_TEMP_0].msb - - priv->fields[LAST_TEMP_0].lsb; - - ret = regmap_field_read(priv->rf[field], &temp); - if (ret) - return ret; - - /* Convert temperature from ADC code to milliCelsius */ - if (priv->feat->adc) - return code_to_degc(temp, s) * 1000; - - /* deciCelsius -> milliCelsius along with sign extension */ - return sign_extend32(temp, resolution) * 100; -} - -/** - * tsens_mC_to_hw - Convert temperature to hardware register value - * @s: Pointer to sensor struct - * @temp: temperature in milliCelsius to be programmed to hardware - * - * This function outputs the value to be written to hardware in ADC code - * or deciCelsius depending on IP version. - * - * Return: ADC code or temperature in deciCelsius. - */ -static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp) -{ - struct tsens_priv *priv = s->priv; - - /* milliC to adc code */ - if (priv->feat->adc) - return degc_to_code(temp / 1000, s); - - /* milliC to deciC */ - return temp / 100; -} - -static inline enum tsens_ver tsens_version(struct tsens_priv *priv) -{ - return priv->feat->ver_major; -} - -static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id, - enum tsens_irq_type irq_type, bool enable) -{ - u32 index = 0; - - switch (irq_type) { - case UPPER: - index = UP_INT_CLEAR_0 + hw_id; - break; - case LOWER: - index = LOW_INT_CLEAR_0 + hw_id; - break; - case CRITICAL: - /* No critical interrupts before v2 */ - return; - } - regmap_field_write(priv->rf[index], enable ? 0 : 1); -} - -static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id, - enum tsens_irq_type irq_type, bool enable) -{ - u32 index_mask = 0, index_clear = 0; - - /* - * To enable the interrupt flag for a sensor: - * - clear the mask bit - * To disable the interrupt flag for a sensor: - * - Mask further interrupts for this sensor - * - Write 1 followed by 0 to clear the interrupt - */ - switch (irq_type) { - case UPPER: - index_mask = UP_INT_MASK_0 + hw_id; - index_clear = UP_INT_CLEAR_0 + hw_id; - break; - case LOWER: - index_mask = LOW_INT_MASK_0 + hw_id; - index_clear = LOW_INT_CLEAR_0 + hw_id; - break; - case CRITICAL: - index_mask = CRIT_INT_MASK_0 + hw_id; - index_clear = CRIT_INT_CLEAR_0 + hw_id; - break; - } - - if (enable) { - regmap_field_write(priv->rf[index_mask], 0); - } else { - regmap_field_write(priv->rf[index_mask], 1); - regmap_field_write(priv->rf[index_clear], 1); - regmap_field_write(priv->rf[index_clear], 0); - } -} - -/** - * tsens_set_interrupt - Set state of an interrupt - * @priv: Pointer to tsens controller private data - * @hw_id: Hardware ID aka. sensor number - * @irq_type: irq_type from enum tsens_irq_type - * @enable: false = disable, true = enable - * - * Call IP-specific function to set state of an interrupt - * - * Return: void - */ -static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id, - enum tsens_irq_type irq_type, bool enable) -{ - dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__, - irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW", - enable ? "en" : "dis"); - if (tsens_version(priv) > VER_1_X) - tsens_set_interrupt_v2(priv, hw_id, irq_type, enable); - else - tsens_set_interrupt_v1(priv, hw_id, irq_type, enable); -} - -/** - * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold - * @priv: Pointer to tsens controller private data - * @hw_id: Hardware ID aka. sensor number - * @d: Pointer to irq state data - * - * Return: 0 if threshold was not violated, 1 if it was violated and negative - * errno in case of errors - */ -static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id, - struct tsens_irq_data *d) -{ - int ret; - - ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol); - if (ret) - return ret; - ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol); - if (ret) - return ret; - - if (priv->feat->crit_int) { - ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id], - &d->crit_viol); - if (ret) - return ret; - } - - if (d->up_viol || d->low_viol || d->crit_viol) - return 1; - - return 0; -} - -static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id, - const struct tsens_sensor *s, - struct tsens_irq_data *d) -{ - int ret; - - ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear); - if (ret) - return ret; - ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear); - if (ret) - return ret; - if (tsens_version(priv) > VER_1_X) { - ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask); - if (ret) - return ret; - ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask); - if (ret) - return ret; - ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id], - &d->crit_irq_clear); - if (ret) - return ret; - ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id], - &d->crit_irq_mask); - if (ret) - return ret; - - d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id); - } else { - /* No mask register on older TSENS */ - d->up_irq_mask = 0; - d->low_irq_mask = 0; - d->crit_irq_clear = 0; - d->crit_irq_mask = 0; - d->crit_thresh = 0; - } - - d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id); - d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id); - - dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n", - hw_id, __func__, - (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", - d->low_viol, d->up_viol, d->crit_viol, - d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear, - d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask); - dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__, - (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", - d->low_thresh, d->up_thresh, d->crit_thresh); - - return 0; -} - -static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver) -{ - if (ver > VER_1_X) - return mask & (1 << hw_id); - - /* v1, v0.1 don't have a irq mask register */ - return 0; -} - -/** - * tsens_critical_irq_thread() - Threaded handler for critical interrupts - * @irq: irq number - * @data: tsens controller private data - * - * Check FSM watchdog bark status and clear if needed. - * Check all sensors to find ones that violated their critical threshold limits. - * Clear and then re-enable the interrupt. - * - * The level-triggered interrupt might deassert if the temperature returned to - * within the threshold limits by the time the handler got scheduled. We - * consider the irq to have been handled in that case. - * - * Return: IRQ_HANDLED - */ -irqreturn_t tsens_critical_irq_thread(int irq, void *data) -{ - struct tsens_priv *priv = data; - struct tsens_irq_data d; - int temp, ret, i; - u32 wdog_status, wdog_count; - - if (priv->feat->has_watchdog) { - ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], - &wdog_status); - if (ret) - return ret; - - if (wdog_status) { - /* Clear WDOG interrupt */ - regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1); - regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0); - ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], - &wdog_count); - if (ret) - return ret; - if (wdog_count) - dev_dbg(priv->dev, "%s: watchdog count: %d\n", - __func__, wdog_count); - - /* Fall through to handle critical interrupts if any */ - } - } - - for (i = 0; i < priv->num_sensors; i++) { - const struct tsens_sensor *s = &priv->sensor[i]; - u32 hw_id = s->hw_id; - - if (IS_ERR(s->tzd)) - continue; - if (!tsens_threshold_violated(priv, hw_id, &d)) - continue; - ret = get_temp_tsens_valid(s, &temp); - if (ret) { - dev_err(priv->dev, "[%u] %s: error reading sensor\n", - hw_id, __func__); - continue; - } - - tsens_read_irq_state(priv, hw_id, s, &d); - if (d.crit_viol && - !masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) { - /* Mask critical interrupts, unused on Linux */ - tsens_set_interrupt(priv, hw_id, CRITICAL, false); - } - } - - return IRQ_HANDLED; -} - -/** - * tsens_irq_thread - Threaded interrupt handler for uplow interrupts - * @irq: irq number - * @data: tsens controller private data - * - * Check all sensors to find ones that violated their threshold limits. If the - * temperature is still outside the limits, call thermal_zone_device_update() to - * update the thresholds, else re-enable the interrupts. - * - * The level-triggered interrupt might deassert if the temperature returned to - * within the threshold limits by the time the handler got scheduled. We - * consider the irq to have been handled in that case. - * - * Return: IRQ_HANDLED - */ -irqreturn_t tsens_irq_thread(int irq, void *data) -{ - struct tsens_priv *priv = data; - struct tsens_irq_data d; - bool enable = true, disable = false; - unsigned long flags; - int temp, ret, i; - - for (i = 0; i < priv->num_sensors; i++) { - bool trigger = false; - const struct tsens_sensor *s = &priv->sensor[i]; - u32 hw_id = s->hw_id; - - if (IS_ERR(s->tzd)) - continue; - if (!tsens_threshold_violated(priv, hw_id, &d)) - continue; - ret = get_temp_tsens_valid(s, &temp); - if (ret) { - dev_err(priv->dev, "[%u] %s: error reading sensor\n", hw_id, __func__); - continue; - } - - spin_lock_irqsave(&priv->ul_lock, flags); - - tsens_read_irq_state(priv, hw_id, s, &d); - - if (d.up_viol && - !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) { - tsens_set_interrupt(priv, hw_id, UPPER, disable); - if (d.up_thresh > temp) { - dev_dbg(priv->dev, "[%u] %s: re-arm upper\n", - hw_id, __func__); - tsens_set_interrupt(priv, hw_id, UPPER, enable); - } else { - trigger = true; - /* Keep irq masked */ - } - } else if (d.low_viol && - !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) { - tsens_set_interrupt(priv, hw_id, LOWER, disable); - if (d.low_thresh < temp) { - dev_dbg(priv->dev, "[%u] %s: re-arm low\n", - hw_id, __func__); - tsens_set_interrupt(priv, hw_id, LOWER, enable); - } else { - trigger = true; - /* Keep irq masked */ - } - } - - spin_unlock_irqrestore(&priv->ul_lock, flags); - - if (trigger) { - dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n", - hw_id, __func__, temp); - thermal_zone_device_update(s->tzd, - THERMAL_EVENT_UNSPECIFIED); - } else { - dev_dbg(priv->dev, "[%u] %s: no violation: %d\n", - hw_id, __func__, temp); - } - } - - return IRQ_HANDLED; -} - -int tsens_set_trips(void *_sensor, int low, int high) -{ - struct tsens_sensor *s = _sensor; - struct tsens_priv *priv = s->priv; - struct device *dev = priv->dev; - struct tsens_irq_data d; - unsigned long flags; - int high_val, low_val, cl_high, cl_low; - u32 hw_id = s->hw_id; - - dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", - hw_id, __func__, low, high); - - cl_high = clamp_val(high, -40000, 120000); - cl_low = clamp_val(low, -40000, 120000); - - high_val = tsens_mC_to_hw(s, cl_high); - low_val = tsens_mC_to_hw(s, cl_low); - - spin_lock_irqsave(&priv->ul_lock, flags); - - tsens_read_irq_state(priv, hw_id, s, &d); - - /* Write the new thresholds and clear the status */ - regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val); - regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val); - tsens_set_interrupt(priv, hw_id, LOWER, true); - tsens_set_interrupt(priv, hw_id, UPPER, true); - - spin_unlock_irqrestore(&priv->ul_lock, flags); - - dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n", - hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high); - - return 0; -} - -int tsens_enable_irq(struct tsens_priv *priv) -{ - int ret; - int val = tsens_version(priv) > VER_1_X ? 7 : 1; - - ret = regmap_field_write(priv->rf[INT_EN], val); - if (ret < 0) - dev_err(priv->dev, "%s: failed to enable interrupts\n", __func__); - - return ret; -} - -void tsens_disable_irq(struct tsens_priv *priv) -{ - regmap_field_write(priv->rf[INT_EN], 0); -} - -int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp) -{ - struct tsens_priv *priv = s->priv; - int hw_id = s->hw_id; - u32 temp_idx = LAST_TEMP_0 + hw_id; - u32 valid_idx = VALID_0 + hw_id; - u32 valid; - int ret; - - ret = regmap_field_read(priv->rf[valid_idx], &valid); - if (ret) - return ret; - while (!valid) { - /* Valid bit is 0 for 6 AHB clock cycles. - * At 19.2MHz, 1 AHB clock is ~60ns. - * We should enter this loop very, very rarely. - */ - ndelay(400); - ret = regmap_field_read(priv->rf[valid_idx], &valid); - if (ret) - return ret; - } - - /* Valid bit is set, OK to read the temperature */ - *temp = tsens_hw_to_mC(s, temp_idx); - - return 0; -} - -int get_temp_common(const struct tsens_sensor *s, int *temp) -{ - struct tsens_priv *priv = s->priv; - int hw_id = s->hw_id; - int last_temp = 0, ret; - - ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp); - if (ret) - return ret; - - *temp = code_to_degc(last_temp, s) * 1000; - - return 0; -} - -#ifdef CONFIG_DEBUG_FS -static int dbg_sensors_show(struct seq_file *s, void *data) -{ - struct platform_device *pdev = s->private; - struct tsens_priv *priv = platform_get_drvdata(pdev); - int i; - - seq_printf(s, "max: %2d\nnum: %2d\n\n", - priv->feat->max_sensors, priv->num_sensors); - - seq_puts(s, " id slope offset\n--------------------------\n"); - for (i = 0; i < priv->num_sensors; i++) { - seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id, - priv->sensor[i].slope, priv->sensor[i].offset); - } - - return 0; -} - -static int dbg_version_show(struct seq_file *s, void *data) -{ - struct platform_device *pdev = s->private; - struct tsens_priv *priv = platform_get_drvdata(pdev); - u32 maj_ver, min_ver, step_ver; - int ret; - - if (tsens_version(priv) > VER_0_1) { - ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver); - if (ret) - return ret; - ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver); - if (ret) - return ret; - ret = regmap_field_read(priv->rf[VER_STEP], &step_ver); - if (ret) - return ret; - seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); - } else { - seq_puts(s, "0.1.0\n"); - } - - return 0; -} - -DEFINE_SHOW_ATTRIBUTE(dbg_version); -DEFINE_SHOW_ATTRIBUTE(dbg_sensors); - -static void tsens_debug_init(struct platform_device *pdev) -{ - struct tsens_priv *priv = platform_get_drvdata(pdev); - struct dentry *root, *file; - - root = debugfs_lookup("tsens", NULL); - if (!root) - priv->debug_root = debugfs_create_dir("tsens", NULL); - else - priv->debug_root = root; - - file = debugfs_lookup("version", priv->debug_root); - if (!file) - debugfs_create_file("version", 0444, priv->debug_root, - pdev, &dbg_version_fops); - - /* A directory for each instance of the TSENS IP */ - priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root); - debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops); -} -#else -static inline void tsens_debug_init(struct platform_device *pdev) {} -#endif - -static const struct regmap_config tsens_config = { - .name = "tm", - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, -}; - -static const struct regmap_config tsens_srot_config = { - .name = "srot", - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, -}; - -int __init init_common(struct tsens_priv *priv) -{ - void __iomem *tm_base, *srot_base; - struct device *dev = priv->dev; - u32 ver_minor; - struct resource *res; - u32 enabled; - int ret, i, j; - struct platform_device *op = of_find_device_by_node(priv->dev->of_node); - - if (!op) - return -EINVAL; - - if (op->num_resources > 1) { - /* DT with separate SROT and TM address space */ - priv->tm_offset = 0; - res = platform_get_resource(op, IORESOURCE_MEM, 1); - srot_base = devm_ioremap_resource(dev, res); - if (IS_ERR(srot_base)) { - ret = PTR_ERR(srot_base); - goto err_put_device; - } - - priv->srot_map = devm_regmap_init_mmio(dev, srot_base, - &tsens_srot_config); - if (IS_ERR(priv->srot_map)) { - ret = PTR_ERR(priv->srot_map); - goto err_put_device; - } - } else { - /* old DTs where SROT and TM were in a contiguous 2K block */ - priv->tm_offset = 0x1000; - } - - res = platform_get_resource(op, IORESOURCE_MEM, 0); - tm_base = devm_ioremap_resource(dev, res); - if (IS_ERR(tm_base)) { - ret = PTR_ERR(tm_base); - goto err_put_device; - } - - priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config); - if (IS_ERR(priv->tm_map)) { - ret = PTR_ERR(priv->tm_map); - goto err_put_device; - } - - if (tsens_version(priv) > VER_0_1) { - for (i = VER_MAJOR; i <= VER_STEP; i++) { - priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map, - priv->fields[i]); - if (IS_ERR(priv->rf[i])) - return PTR_ERR(priv->rf[i]); - } - ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor); - if (ret) - goto err_put_device; - } - - priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map, - priv->fields[TSENS_EN]); - if (IS_ERR(priv->rf[TSENS_EN])) { - ret = PTR_ERR(priv->rf[TSENS_EN]); - goto err_put_device; - } - ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); - if (ret) - goto err_put_device; - if (!enabled) { - dev_err(dev, "%s: device not enabled\n", __func__); - ret = -ENODEV; - goto err_put_device; - } - - priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map, - priv->fields[SENSOR_EN]); - if (IS_ERR(priv->rf[SENSOR_EN])) { - ret = PTR_ERR(priv->rf[SENSOR_EN]); - goto err_put_device; - } - priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map, - priv->fields[INT_EN]); - if (IS_ERR(priv->rf[INT_EN])) { - ret = PTR_ERR(priv->rf[INT_EN]); - goto err_put_device; - } - - /* This loop might need changes if enum regfield_ids is reordered */ - for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) { - for (i = 0; i < priv->feat->max_sensors; i++) { - int idx = j + i; - - priv->rf[idx] = devm_regmap_field_alloc(dev, priv->tm_map, - priv->fields[idx]); - if (IS_ERR(priv->rf[idx])) { - ret = PTR_ERR(priv->rf[idx]); - goto err_put_device; - } - } - } - - if (priv->feat->crit_int) { - /* Loop might need changes if enum regfield_ids is reordered */ - for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) { - for (i = 0; i < priv->feat->max_sensors; i++) { - int idx = j + i; - - priv->rf[idx] = - devm_regmap_field_alloc(dev, - priv->tm_map, - priv->fields[idx]); - if (IS_ERR(priv->rf[idx])) { - ret = PTR_ERR(priv->rf[idx]); - goto err_put_device; - } - } - } - } - - if (tsens_version(priv) > VER_1_X && ver_minor > 2) { - /* Watchdog is present only on v2.3+ */ - priv->feat->has_watchdog = 1; - for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) { - priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map, - priv->fields[i]); - if (IS_ERR(priv->rf[i])) { - ret = PTR_ERR(priv->rf[i]); - goto err_put_device; - } - } - /* - * Watchdog is already enabled, unmask the bark. - * Disable cycle completion monitoring - */ - regmap_field_write(priv->rf[WDOG_BARK_MASK], 0); - regmap_field_write(priv->rf[CC_MON_MASK], 1); - } - - spin_lock_init(&priv->ul_lock); - tsens_enable_irq(priv); - tsens_debug_init(op); - -err_put_device: - put_device(&op->dev); - return ret; -} diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 2f77d235cf73..8d3e94d2a9ed 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -1,19 +1,857 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, 2020, Linaro Ltd. */ #include <linux/debugfs.h> #include <linux/err.h> +#include <linux/io.h> #include <linux/module.h> +#include <linux/nvmem-consumer.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/pm.h> +#include <linux/regmap.h> #include <linux/slab.h> #include <linux/thermal.h> #include "tsens.h" +/** + * struct tsens_irq_data - IRQ status and temperature violations + * @up_viol: upper threshold violated + * @up_thresh: upper threshold temperature value + * @up_irq_mask: mask register for upper threshold irqs + * @up_irq_clear: clear register for uppper threshold irqs + * @low_viol: lower threshold violated + * @low_thresh: lower threshold temperature value + * @low_irq_mask: mask register for lower threshold irqs + * @low_irq_clear: clear register for lower threshold irqs + * @crit_viol: critical threshold violated + * @crit_thresh: critical threshold temperature value + * @crit_irq_mask: mask register for critical threshold irqs + * @crit_irq_clear: clear register for critical threshold irqs + * + * Structure containing data about temperature threshold settings and + * irq status if they were violated. + */ +struct tsens_irq_data { + u32 up_viol; + int up_thresh; + u32 up_irq_mask; + u32 up_irq_clear; + u32 low_viol; + int low_thresh; + u32 low_irq_mask; + u32 low_irq_clear; + u32 crit_viol; + u32 crit_thresh; + u32 crit_irq_mask; + u32 crit_irq_clear; +}; + +char *qfprom_read(struct device *dev, const char *cname) +{ + struct nvmem_cell *cell; + ssize_t data; + char *ret; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) + return ERR_CAST(cell); + + ret = nvmem_cell_read(cell, &data); + nvmem_cell_put(cell); + + return ret; +} + +/* + * Use this function on devices where slope and offset calculations + * depend on calibration data read from qfprom. On others the slope + * and offset values are derived from tz->tzp->slope and tz->tzp->offset + * resp. + */ +void compute_intercept_slope(struct tsens_priv *priv, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < priv->num_sensors; i++) { + dev_dbg(priv->dev, + "%s: sensor%d - data_point1:%#x data_point2:%#x\n", + __func__, i, p1[i], p2[i]); + + priv->sensor[i].slope = SLOPE_DEFAULT; + if (mode == TWO_PT_CALIB) { + /* + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + * temp_120_degc - temp_30_degc (x2 - x1) + */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + priv->sensor[i].slope = num / den; + } + + priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + priv->sensor[i].slope); + dev_dbg(priv->dev, "%s: offset:%d\n", __func__, + priv->sensor[i].offset); + } +} + +static inline u32 degc_to_code(int degc, const struct tsens_sensor *s) +{ + u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR); + + pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc); + return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE); +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +/** + * tsens_hw_to_mC - Return sign-extended temperature in mCelsius. + * @s: Pointer to sensor struct + * @field: Index into regmap_field array pointing to temperature data + * + * This function handles temperature returned in ADC code or deciCelsius + * depending on IP version. + * + * Return: Temperature in milliCelsius on success, a negative errno will + * be returned in error cases + */ +static int tsens_hw_to_mC(const struct tsens_sensor *s, int field) +{ + struct tsens_priv *priv = s->priv; + u32 resolution; + u32 temp = 0; + int ret; + + resolution = priv->fields[LAST_TEMP_0].msb - + priv->fields[LAST_TEMP_0].lsb; + + ret = regmap_field_read(priv->rf[field], &temp); + if (ret) + return ret; + + /* Convert temperature from ADC code to milliCelsius */ + if (priv->feat->adc) + return code_to_degc(temp, s) * 1000; + + /* deciCelsius -> milliCelsius along with sign extension */ + return sign_extend32(temp, resolution) * 100; +} + +/** + * tsens_mC_to_hw - Convert temperature to hardware register value + * @s: Pointer to sensor struct + * @temp: temperature in milliCelsius to be programmed to hardware + * + * This function outputs the value to be written to hardware in ADC code + * or deciCelsius depending on IP version. + * + * Return: ADC code or temperature in deciCelsius. + */ +static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp) +{ + struct tsens_priv *priv = s->priv; + + /* milliC to adc code */ + if (priv->feat->adc) + return degc_to_code(temp / 1000, s); + + /* milliC to deciC */ + return temp / 100; +} + +static inline enum tsens_ver tsens_version(struct tsens_priv *priv) +{ + return priv->feat->ver_major; +} + +static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + u32 index = 0; + + switch (irq_type) { + case UPPER: + index = UP_INT_CLEAR_0 + hw_id; + break; + case LOWER: + index = LOW_INT_CLEAR_0 + hw_id; + break; + case CRITICAL: + /* No critical interrupts before v2 */ + return; + } + regmap_field_write(priv->rf[index], enable ? 0 : 1); +} + +static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + u32 index_mask = 0, index_clear = 0; + + /* + * To enable the interrupt flag for a sensor: + * - clear the mask bit + * To disable the interrupt flag for a sensor: + * - Mask further interrupts for this sensor + * - Write 1 followed by 0 to clear the interrupt + */ + switch (irq_type) { + case UPPER: + index_mask = UP_INT_MASK_0 + hw_id; + index_clear = UP_INT_CLEAR_0 + hw_id; + break; + case LOWER: + index_mask = LOW_INT_MASK_0 + hw_id; + index_clear = LOW_INT_CLEAR_0 + hw_id; + break; + case CRITICAL: + index_mask = CRIT_INT_MASK_0 + hw_id; + index_clear = CRIT_INT_CLEAR_0 + hw_id; + break; + } + + if (enable) { + regmap_field_write(priv->rf[index_mask], 0); + } else { + regmap_field_write(priv->rf[index_mask], 1); + regmap_field_write(priv->rf[index_clear], 1); + regmap_field_write(priv->rf[index_clear], 0); + } +} + +/** + * tsens_set_interrupt - Set state of an interrupt + * @priv: Pointer to tsens controller private data + * @hw_id: Hardware ID aka. sensor number + * @irq_type: irq_type from enum tsens_irq_type + * @enable: false = disable, true = enable + * + * Call IP-specific function to set state of an interrupt + * + * Return: void + */ +static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__, + irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW", + enable ? "en" : "dis"); + if (tsens_version(priv) > VER_1_X) + tsens_set_interrupt_v2(priv, hw_id, irq_type, enable); + else + tsens_set_interrupt_v1(priv, hw_id, irq_type, enable); +} + +/** + * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold + * @priv: Pointer to tsens controller private data + * @hw_id: Hardware ID aka. sensor number + * @d: Pointer to irq state data + * + * Return: 0 if threshold was not violated, 1 if it was violated and negative + * errno in case of errors + */ +static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id, + struct tsens_irq_data *d) +{ + int ret; + + ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol); + if (ret) + return ret; + + if (priv->feat->crit_int) { + ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id], + &d->crit_viol); + if (ret) + return ret; + } + + if (d->up_viol || d->low_viol || d->crit_viol) + return 1; + + return 0; +} + +static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id, + const struct tsens_sensor *s, + struct tsens_irq_data *d) +{ + int ret; + + ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear); + if (ret) + return ret; + if (tsens_version(priv) > VER_1_X) { + ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id], + &d->crit_irq_clear); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id], + &d->crit_irq_mask); + if (ret) + return ret; + + d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id); + } else { + /* No mask register on older TSENS */ + d->up_irq_mask = 0; + d->low_irq_mask = 0; + d->crit_irq_clear = 0; + d->crit_irq_mask = 0; + d->crit_thresh = 0; + } + + d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id); + d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id); + + dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n", + hw_id, __func__, + (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", + d->low_viol, d->up_viol, d->crit_viol, + d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear, + d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask); + dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__, + (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", + d->low_thresh, d->up_thresh, d->crit_thresh); + + return 0; +} + +static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver) +{ + if (ver > VER_1_X) + return mask & (1 << hw_id); + + /* v1, v0.1 don't have a irq mask register */ + return 0; +} + +/** + * tsens_critical_irq_thread() - Threaded handler for critical interrupts + * @irq: irq number + * @data: tsens controller private data + * + * Check FSM watchdog bark status and clear if needed. + * Check all sensors to find ones that violated their critical threshold limits. + * Clear and then re-enable the interrupt. + * + * The level-triggered interrupt might deassert if the temperature returned to + * within the threshold limits by the time the handler got scheduled. We + * consider the irq to have been handled in that case. + * + * Return: IRQ_HANDLED + */ +irqreturn_t tsens_critical_irq_thread(int irq, void *data) +{ + struct tsens_priv *priv = data; + struct tsens_irq_data d; + int temp, ret, i; + u32 wdog_status, wdog_count; + + if (priv->feat->has_watchdog) { + ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], + &wdog_status); + if (ret) + return ret; + + if (wdog_status) { + /* Clear WDOG interrupt */ + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1); + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0); + ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], + &wdog_count); + if (ret) + return ret; + if (wdog_count) + dev_dbg(priv->dev, "%s: watchdog count: %d\n", + __func__, wdog_count); + + /* Fall through to handle critical interrupts if any */ + } + } + + for (i = 0; i < priv->num_sensors; i++) { + const struct tsens_sensor *s = &priv->sensor[i]; + u32 hw_id = s->hw_id; + + if (IS_ERR(s->tzd)) + continue; + if (!tsens_threshold_violated(priv, hw_id, &d)) + continue; + ret = get_temp_tsens_valid(s, &temp); + if (ret) { + dev_err(priv->dev, "[%u] %s: error reading sensor\n", + hw_id, __func__); + continue; + } + + tsens_read_irq_state(priv, hw_id, s, &d); + if (d.crit_viol && + !masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) { + /* Mask critical interrupts, unused on Linux */ + tsens_set_interrupt(priv, hw_id, CRITICAL, false); + } + } + + return IRQ_HANDLED; +} + +/** + * tsens_irq_thread - Threaded interrupt handler for uplow interrupts + * @irq: irq number + * @data: tsens controller private data + * + * Check all sensors to find ones that violated their threshold limits. If the + * temperature is still outside the limits, call thermal_zone_device_update() to + * update the thresholds, else re-enable the interrupts. + * + * The level-triggered interrupt might deassert if the temperature returned to + * within the threshold limits by the time the handler got scheduled. We + * consider the irq to have been handled in that case. + * + * Return: IRQ_HANDLED + */ +irqreturn_t tsens_irq_thread(int irq, void *data) +{ + struct tsens_priv *priv = data; + struct tsens_irq_data d; + bool enable = true, disable = false; + unsigned long flags; + int temp, ret, i; + + for (i = 0; i < priv->num_sensors; i++) { + bool trigger = false; + const struct tsens_sensor *s = &priv->sensor[i]; + u32 hw_id = s->hw_id; + + if (IS_ERR(s->tzd)) + continue; + if (!tsens_threshold_violated(priv, hw_id, &d)) + continue; + ret = get_temp_tsens_valid(s, &temp); + if (ret) { + dev_err(priv->dev, "[%u] %s: error reading sensor\n", + hw_id, __func__); + continue; + } + + spin_lock_irqsave(&priv->ul_lock, flags); + + tsens_read_irq_state(priv, hw_id, s, &d); + + if (d.up_viol && + !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) { + tsens_set_interrupt(priv, hw_id, UPPER, disable); + if (d.up_thresh > temp) { + dev_dbg(priv->dev, "[%u] %s: re-arm upper\n", + hw_id, __func__); + tsens_set_interrupt(priv, hw_id, UPPER, enable); + } else { + trigger = true; + /* Keep irq masked */ + } + } else if (d.low_viol && + !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) { + tsens_set_interrupt(priv, hw_id, LOWER, disable); + if (d.low_thresh < temp) { + dev_dbg(priv->dev, "[%u] %s: re-arm low\n", + hw_id, __func__); + tsens_set_interrupt(priv, hw_id, LOWER, enable); + } else { + trigger = true; + /* Keep irq masked */ + } + } + + spin_unlock_irqrestore(&priv->ul_lock, flags); + + if (trigger) { + dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n", + hw_id, __func__, temp); + thermal_zone_device_update(s->tzd, + THERMAL_EVENT_UNSPECIFIED); + } else { + dev_dbg(priv->dev, "[%u] %s: no violation: %d\n", + hw_id, __func__, temp); + } + } + + return IRQ_HANDLED; +} + +int tsens_set_trips(void *_sensor, int low, int high) +{ + struct tsens_sensor *s = _sensor; + struct tsens_priv *priv = s->priv; + struct device *dev = priv->dev; + struct tsens_irq_data d; + unsigned long flags; + int high_val, low_val, cl_high, cl_low; + u32 hw_id = s->hw_id; + + dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", + hw_id, __func__, low, high); + + cl_high = clamp_val(high, -40000, 120000); + cl_low = clamp_val(low, -40000, 120000); + + high_val = tsens_mC_to_hw(s, cl_high); + low_val = tsens_mC_to_hw(s, cl_low); + + spin_lock_irqsave(&priv->ul_lock, flags); + + tsens_read_irq_state(priv, hw_id, s, &d); + + /* Write the new thresholds and clear the status */ + regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val); + regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val); + tsens_set_interrupt(priv, hw_id, LOWER, true); + tsens_set_interrupt(priv, hw_id, UPPER, true); + + spin_unlock_irqrestore(&priv->ul_lock, flags); + + dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n", + hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high); + + return 0; +} + +int tsens_enable_irq(struct tsens_priv *priv) +{ + int ret; + int val = tsens_version(priv) > VER_1_X ? 7 : 1; + + ret = regmap_field_write(priv->rf[INT_EN], val); + if (ret < 0) + dev_err(priv->dev, "%s: failed to enable interrupts\n", + __func__); + + return ret; +} + +void tsens_disable_irq(struct tsens_priv *priv) +{ + regmap_field_write(priv->rf[INT_EN], 0); +} + +int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp) +{ + struct tsens_priv *priv = s->priv; + int hw_id = s->hw_id; + u32 temp_idx = LAST_TEMP_0 + hw_id; + u32 valid_idx = VALID_0 + hw_id; + u32 valid; + int ret; + + ret = regmap_field_read(priv->rf[valid_idx], &valid); + if (ret) + return ret; + while (!valid) { + /* Valid bit is 0 for 6 AHB clock cycles. + * At 19.2MHz, 1 AHB clock is ~60ns. + * We should enter this loop very, very rarely. + */ + ndelay(400); + ret = regmap_field_read(priv->rf[valid_idx], &valid); + if (ret) + return ret; + } + + /* Valid bit is set, OK to read the temperature */ + *temp = tsens_hw_to_mC(s, temp_idx); + + return 0; +} + +int get_temp_common(const struct tsens_sensor *s, int *temp) +{ + struct tsens_priv *priv = s->priv; + int hw_id = s->hw_id; + int last_temp = 0, ret; + + ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp); + if (ret) + return ret; + + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; +} + +#ifdef CONFIG_DEBUG_FS +static int dbg_sensors_show(struct seq_file *s, void *data) +{ + struct platform_device *pdev = s->private; + struct tsens_priv *priv = platform_get_drvdata(pdev); + int i; + + seq_printf(s, "max: %2d\nnum: %2d\n\n", + priv->feat->max_sensors, priv->num_sensors); + + seq_puts(s, " id slope offset\n--------------------------\n"); + for (i = 0; i < priv->num_sensors; i++) { + seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id, + priv->sensor[i].slope, priv->sensor[i].offset); + } + + return 0; +} + +static int dbg_version_show(struct seq_file *s, void *data) +{ + struct platform_device *pdev = s->private; + struct tsens_priv *priv = platform_get_drvdata(pdev); + u32 maj_ver, min_ver, step_ver; + int ret; + + if (tsens_version(priv) > VER_0_1) { + ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[VER_STEP], &step_ver); + if (ret) + return ret; + seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); + } else { + seq_puts(s, "0.1.0\n"); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(dbg_version); +DEFINE_SHOW_ATTRIBUTE(dbg_sensors); + +static void tsens_debug_init(struct platform_device *pdev) +{ + struct tsens_priv *priv = platform_get_drvdata(pdev); + struct dentry *root, *file; + + root = debugfs_lookup("tsens", NULL); + if (!root) + priv->debug_root = debugfs_create_dir("tsens", NULL); + else + priv->debug_root = root; + + file = debugfs_lookup("version", priv->debug_root); + if (!file) + debugfs_create_file("version", 0444, priv->debug_root, + pdev, &dbg_version_fops); + + /* A directory for each instance of the TSENS IP */ + priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root); + debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops); +} +#else +static inline void tsens_debug_init(struct platform_device *pdev) {} +#endif + +static const struct regmap_config tsens_config = { + .name = "tm", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static const struct regmap_config tsens_srot_config = { + .name = "srot", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +int __init init_common(struct tsens_priv *priv) +{ + void __iomem *tm_base, *srot_base; + struct device *dev = priv->dev; + u32 ver_minor; + struct resource *res; + u32 enabled; + int ret, i, j; + struct platform_device *op = of_find_device_by_node(priv->dev->of_node); + + if (!op) + return -EINVAL; + + if (op->num_resources > 1) { + /* DT with separate SROT and TM address space */ + priv->tm_offset = 0; + res = platform_get_resource(op, IORESOURCE_MEM, 1); + srot_base = devm_ioremap_resource(dev, res); + if (IS_ERR(srot_base)) { + ret = PTR_ERR(srot_base); + goto err_put_device; + } + + priv->srot_map = devm_regmap_init_mmio(dev, srot_base, + &tsens_srot_config); + if (IS_ERR(priv->srot_map)) { + ret = PTR_ERR(priv->srot_map); + goto err_put_device; + } + } else { + /* old DTs where SROT and TM were in a contiguous 2K block */ + priv->tm_offset = 0x1000; + } + + res = platform_get_resource(op, IORESOURCE_MEM, 0); + tm_base = devm_ioremap_resource(dev, res); + if (IS_ERR(tm_base)) { + ret = PTR_ERR(tm_base); + goto err_put_device; + } + + priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config); + if (IS_ERR(priv->tm_map)) { + ret = PTR_ERR(priv->tm_map); + goto err_put_device; + } + + if (tsens_version(priv) > VER_0_1) { + for (i = VER_MAJOR; i <= VER_STEP; i++) { + priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[i]); + if (IS_ERR(priv->rf[i])) + return PTR_ERR(priv->rf[i]); + } + ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor); + if (ret) + goto err_put_device; + } + + priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[TSENS_EN]); + if (IS_ERR(priv->rf[TSENS_EN])) { + ret = PTR_ERR(priv->rf[TSENS_EN]); + goto err_put_device; + } + ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); + if (ret) + goto err_put_device; + if (!enabled) { + dev_err(dev, "%s: device not enabled\n", __func__); + ret = -ENODEV; + goto err_put_device; + } + + priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[SENSOR_EN]); + if (IS_ERR(priv->rf[SENSOR_EN])) { + ret = PTR_ERR(priv->rf[SENSOR_EN]); + goto err_put_device; + } + priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[INT_EN]); + if (IS_ERR(priv->rf[INT_EN])) { + ret = PTR_ERR(priv->rf[INT_EN]); + goto err_put_device; + } + + /* This loop might need changes if enum regfield_ids is reordered */ + for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) { + for (i = 0; i < priv->feat->max_sensors; i++) { + int idx = j + i; + + priv->rf[idx] = devm_regmap_field_alloc(dev, + priv->tm_map, + priv->fields[idx]); + if (IS_ERR(priv->rf[idx])) { + ret = PTR_ERR(priv->rf[idx]); + goto err_put_device; + } + } + } + + if (priv->feat->crit_int) { + /* Loop might need changes if enum regfield_ids is reordered */ + for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) { + for (i = 0; i < priv->feat->max_sensors; i++) { + int idx = j + i; + + priv->rf[idx] = + devm_regmap_field_alloc(dev, + priv->tm_map, + priv->fields[idx]); + if (IS_ERR(priv->rf[idx])) { + ret = PTR_ERR(priv->rf[idx]); + goto err_put_device; + } + } + } + } + + if (tsens_version(priv) > VER_1_X && ver_minor > 2) { + /* Watchdog is present only on v2.3+ */ + priv->feat->has_watchdog = 1; + for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) { + priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[i]); + if (IS_ERR(priv->rf[i])) { + ret = PTR_ERR(priv->rf[i]); + goto err_put_device; + } + } + /* + * Watchdog is already enabled, unmask the bark. + * Disable cycle completion monitoring + */ + regmap_field_write(priv->rf[WDOG_BARK_MASK], 0); + regmap_field_write(priv->rf[CC_MON_MASK], 1); + } + + spin_lock_init(&priv->ul_lock); + tsens_enable_irq(priv); + tsens_debug_init(op); + +err_put_device: + put_device(&op->dev); + return ret; +} + static int tsens_get_temp(void *data, int *temp) { struct tsens_sensor *s = data; diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index 502acf0e6828..59d01162c66a 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -580,11 +580,6 @@ void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mo int init_common(struct tsens_priv *priv); int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp); int get_temp_common(const struct tsens_sensor *s, int *temp); -int tsens_enable_irq(struct tsens_priv *priv); -void tsens_disable_irq(struct tsens_priv *priv); -int tsens_set_trips(void *_sensor, int low, int high); -irqreturn_t tsens_irq_thread(int irq, void *data); -irqreturn_t tsens_critical_irq_thread(int irq, void *data); /* TSENS target */ extern struct tsens_plat_data data_8960; diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c index 028a6bbf75dc..73049f9bea25 100644 --- a/drivers/thermal/qoriq_thermal.c +++ b/drivers/thermal/qoriq_thermal.c @@ -11,6 +11,7 @@ #include <linux/regmap.h> #include <linux/sizes.h> #include <linux/thermal.h> +#include <linux/units.h> #include "thermal_core.h" #include "thermal_hwmon.h" @@ -23,6 +24,7 @@ #define TMTMIR_DEFAULT 0x0000000f #define TIER_DISABLE 0x0 #define TEUMR0_V2 0x51009c00 +#define TMSARA_V2 0xe #define TMU_VER1 0x1 #define TMU_VER2 0x2 @@ -50,6 +52,9 @@ * Site Register */ #define TRITSR_V BIT(31) +#define REGS_V2_TMSAR(n) (0x304 + 16 * (n)) /* TMU monitoring + * site adjustment register + */ #define REGS_TTRnCR(n) (0xf10 + 4 * (n)) /* Temperature Range n * Control Register */ @@ -85,12 +90,21 @@ static int tmu_get_temp(void *p, int *temp) /* * REGS_TRITSR(id) has the following layout: * + * For TMU Rev1: * 31 ... 7 6 5 4 3 2 1 0 * V TEMP * * Where V bit signifies if the measurement is ready and is * within sensor range. TEMP is an 8 bit value representing - * temperature in C. + * temperature in Celsius. + + * For TMU Rev2: + * 31 ... 8 7 6 5 4 3 2 1 0 + * V TEMP + * + * Where V bit signifies if the measurement is ready and is + * within sensor range. TEMP is an 9 bit value representing + * temperature in KelVin. */ if (regmap_read_poll_timeout(qdata->regmap, REGS_TRITSR(qsensor->id), @@ -100,7 +114,10 @@ static int tmu_get_temp(void *p, int *temp) 10 * USEC_PER_MSEC)) return -ENODATA; - *temp = (val & 0xff) * 1000; + if (qdata->ver == TMU_VER1) + *temp = (val & GENMASK(7, 0)) * MILLIDEGREE_PER_DEGREE; + else + *temp = kelvin_to_millicelsius(val & GENMASK(8, 0)); return 0; } @@ -192,6 +209,8 @@ static int qoriq_tmu_calibration(struct device *dev, static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) { + int i; + /* Disable interrupt, using polling instead */ regmap_write(data->regmap, REGS_TIER, TIER_DISABLE); @@ -202,6 +221,8 @@ static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) } else { regmap_write(data->regmap, REGS_V2_TMTMIR, TMTMIR_DEFAULT); regmap_write(data->regmap, REGS_V2_TEUMR(0), TEUMR0_V2); + for (i = 0; i < SITES_MAX; i++) + regmap_write(data->regmap, REGS_V2_TMSAR(i), TMSARA_V2); } /* Disable monitoring */ @@ -212,6 +233,7 @@ static const struct regmap_range qoriq_yes_ranges[] = { regmap_reg_range(REGS_TMR, REGS_TSCFGR), regmap_reg_range(REGS_TTRnCR(0), REGS_TTRnCR(3)), regmap_reg_range(REGS_V2_TEUMR(0), REGS_V2_TEUMR(2)), + regmap_reg_range(REGS_V2_TMSAR(0), REGS_V2_TMSAR(15)), regmap_reg_range(REGS_IPBRR(0), REGS_IPBRR(1)), /* Read only registers below */ regmap_reg_range(REGS_TRITSR(0), REGS_TRITSR(15)), diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c index e0c1f2409035..46aeb28b4e90 100644 --- a/drivers/thermal/rcar_thermal.c +++ b/drivers/thermal/rcar_thermal.c @@ -198,8 +198,8 @@ static void _rcar_thermal_bset(struct rcar_thermal_priv *priv, u32 reg, static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv) { struct device *dev = rcar_priv_to_dev(priv); - int i; - u32 ctemp, old, new; + int old, new, ctemp = -EINVAL; + unsigned int i; mutex_lock(&priv->lock); @@ -209,7 +209,6 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv) */ rcar_thermal_bset(priv, THSCR, CPCTL, CPCTL); - ctemp = 0; old = ~0; for (i = 0; i < 128; i++) { /* @@ -227,7 +226,7 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv) old = new; } - if (!ctemp) { + if (ctemp < 0) { dev_err(dev, "thermal sensor was broken\n"); goto err_out_unlock; } @@ -248,7 +247,7 @@ static int rcar_thermal_update_temp(struct rcar_thermal_priv *priv) err_out_unlock: mutex_unlock(&priv->lock); - return ctemp ? ctemp : -EINVAL; + return ctemp; } static int rcar_thermal_get_current_temp(struct rcar_thermal_priv *priv, diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c index 7c1a8bccdcba..15a71ecc916c 100644 --- a/drivers/thermal/rockchip_thermal.c +++ b/drivers/thermal/rockchip_thermal.c @@ -1241,10 +1241,8 @@ static int rockchip_thermal_probe(struct platform_device *pdev) return -ENXIO; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "no irq resource?\n"); + if (irq < 0) return -EINVAL; - } thermal = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_thermal_data), GFP_KERNEL); diff --git a/drivers/thermal/st/st_thermal_memmap.c b/drivers/thermal/st/st_thermal_memmap.c index a824b78dabf8..a0114452d11f 100644 --- a/drivers/thermal/st/st_thermal_memmap.c +++ b/drivers/thermal/st/st_thermal_memmap.c @@ -94,10 +94,8 @@ static int st_mmap_register_enable_irq(struct st_thermal_sensor *sensor) int ret; sensor->irq = platform_get_irq(pdev, 0); - if (sensor->irq < 0) { - dev_err(dev, "failed to register IRQ\n"); + if (sensor->irq < 0) return sensor->irq; - } ret = devm_request_threaded_irq(dev, sensor->irq, NULL, st_mmap_thermal_trip_handler, diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c index 9314e3df6a42..331e2b768df5 100644 --- a/drivers/thermal/st/stm_thermal.c +++ b/drivers/thermal/st/stm_thermal.c @@ -385,10 +385,8 @@ static int stm_register_irq(struct stm_thermal_sensor *sensor) int ret; sensor->irq = platform_get_irq(pdev, 0); - if (sensor->irq < 0) { - dev_err(dev, "%s: Unable to find IRQ\n", __func__); + if (sensor->irq < 0) return sensor->irq; - } ret = devm_request_threaded_irq(dev, sensor->irq, NULL, diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 9a321dc548c8..b71196eaf90e 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -9,9 +9,9 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/module.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/slab.h> #include <linux/kdev_t.h> #include <linux/idr.h> @@ -27,10 +27,6 @@ #include "thermal_core.h" #include "thermal_hwmon.h" -MODULE_AUTHOR("Zhang Rui"); -MODULE_DESCRIPTION("Generic thermal management sysfs support"); -MODULE_LICENSE("GPL v2"); - static DEFINE_IDA(thermal_tz_ida); static DEFINE_IDA(thermal_cdev_ida); @@ -447,12 +443,6 @@ static void update_temperature(struct thermal_zone_device *tz) mutex_unlock(&tz->lock); trace_thermal_temperature(tz); - if (tz->last_temperature == THERMAL_TEMP_INVALID) - dev_dbg(&tz->device, "last_temperature N/A, current_temperature=%d\n", - tz->temperature); - else - dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n", - tz->last_temperature, tz->temperature); } static void thermal_zone_device_init(struct thermal_zone_device *tz) diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index a9bf00e91d64..c95689586e19 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -12,6 +12,17 @@ #include <linux/device.h> #include <linux/thermal.h> +/* Default Thermal Governor */ +#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE) +#define DEFAULT_THERMAL_GOVERNOR "step_wise" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE) +#define DEFAULT_THERMAL_GOVERNOR "fair_share" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE) +#define DEFAULT_THERMAL_GOVERNOR "user_space" +#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR) +#define DEFAULT_THERMAL_GOVERNOR "power_allocator" +#endif + /* Initial state of a cooling device during binding */ #define THERMAL_NO_TARGET -1UL @@ -30,6 +41,44 @@ extern struct thermal_governor *__governor_thermal_table_end[]; __governor < __governor_thermal_table_end; \ __governor++) +struct thermal_attr { + struct device_attribute attr; + char name[THERMAL_NAME_LENGTH]; +}; + +static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev) +{ + return cdev->ops->get_requested_power && cdev->ops->state2power && + cdev->ops->power2state; +} + +int power_actor_get_max_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *max_power); +int power_actor_get_min_power(struct thermal_cooling_device *cdev, + struct thermal_zone_device *tz, u32 *min_power); +int power_actor_set_power(struct thermal_cooling_device *cdev, + struct thermal_instance *ti, u32 power); +/** + * struct thermal_trip - representation of a point in temperature domain + * @np: pointer to struct device_node that this trip point was created from + * @temperature: temperature value in miliCelsius + * @hysteresis: relative hysteresis in miliCelsius + * @type: trip point type + */ +struct thermal_trip { + struct device_node *np; + int temperature; + int hysteresis; + enum thermal_trip_type type; +}; + +int get_tz_trend(struct thermal_zone_device *tz, int trip); + +struct thermal_instance * +get_thermal_instance(struct thermal_zone_device *tz, + struct thermal_cooling_device *cdev, + int trip); + /* * This structure is used to describe the behavior of * a certain cooling device on a certain trip point @@ -69,6 +118,9 @@ void thermal_zone_device_unbind_exception(struct thermal_zone_device *, int thermal_zone_device_set_policy(struct thermal_zone_device *, char *); int thermal_build_list_of_policies(char *buf); +/* Helpers */ +void thermal_zone_set_trips(struct thermal_zone_device *tz); + /* sysfs I/F */ int thermal_zone_create_device_groups(struct thermal_zone_device *, int); void thermal_zone_destroy_device_groups(struct thermal_zone_device *); diff --git a/drivers/thermal/thermal_helpers.c b/drivers/thermal/thermal_helpers.c index 2ba756af76b7..87b1256fa2f2 100644 --- a/drivers/thermal/thermal_helpers.c +++ b/drivers/thermal/thermal_helpers.c @@ -12,11 +12,12 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/sysfs.h> #include <linux/device.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/sysfs.h> #include <trace/events/thermal.h> @@ -113,6 +114,18 @@ exit: } EXPORT_SYMBOL_GPL(thermal_zone_get_temp); +/** + * thermal_zone_set_trips - Computes the next trip points for the driver + * @tz: a pointer to a thermal zone device structure + * + * The function computes the next temperature boundaries by browsing + * the trip points. The result is the closer low and high trip points + * to the current temperature. These values are passed to the backend + * driver to let it set its own notification mechanism (usually an + * interrupt). + * + * It does not return a value + */ void thermal_zone_set_trips(struct thermal_zone_device *tz) { int low = -INT_MAX; @@ -161,7 +174,6 @@ void thermal_zone_set_trips(struct thermal_zone_device *tz) exit: mutex_unlock(&tz->lock); } -EXPORT_SYMBOL_GPL(thermal_zone_set_trips); void thermal_cdev_update(struct thermal_cooling_device *cdev) { diff --git a/drivers/thermal/thermal_hwmon.c b/drivers/thermal/thermal_hwmon.c index c8d2620f2e42..8b92e00ff236 100644 --- a/drivers/thermal/thermal_hwmon.c +++ b/drivers/thermal/thermal_hwmon.c @@ -10,10 +10,12 @@ * Copyright (C) 2013 Texas Instruments * Copyright (C) 2013 Eduardo Valentin <eduardo.valentin@ti.com> */ +#include <linux/err.h> +#include <linux/export.h> #include <linux/hwmon.h> -#include <linux/thermal.h> #include <linux/slab.h> -#include <linux/err.h> +#include <linux/thermal.h> + #include "thermal_hwmon.h" /* hwmon sys I/F */ diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/thermal_of.c index 874a47d6923f..ddf88dbe7ba2 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/thermal_of.c @@ -8,13 +8,13 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/thermal.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> #include <linux/err.h> #include <linux/export.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> +#include <linux/slab.h> +#include <linux/thermal.h> +#include <linux/types.h> #include <linux/string.h> #include "thermal_core.h" diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 263b0420fbe4..ab19ceff6e2a 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -772,10 +772,9 @@ static int ti_bandgap_talert_init(struct ti_bandgap *bgp, int ret; bgp->irq = platform_get_irq(pdev, 0); - if (bgp->irq < 0) { - dev_err(&pdev->dev, "get_irq failed\n"); + if (bgp->irq < 0) return bgp->irq; - } + ret = request_threaded_irq(bgp->irq, NULL, ti_bandgap_talert_irq_handler, IRQF_TRIGGER_HIGH | IRQF_ONESHOT, diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index d3e959d01606..85776db4bf34 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -169,7 +169,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, data = ti_bandgap_get_sensor_data(bgp, id); - if (!data || IS_ERR(data)) + if (!IS_ERR_OR_NULL(data)) data = ti_thermal_build_data(bgp, id); if (!data) @@ -196,7 +196,7 @@ int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id) data = ti_bandgap_get_sensor_data(bgp, id); - if (data && data->ti_thermal) { + if (!IS_ERR_OR_NULL(data) && data->ti_thermal) { if (data->our_zone) thermal_zone_device_unregister(data->ti_thermal); } @@ -262,7 +262,7 @@ int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id) data = ti_bandgap_get_sensor_data(bgp, id); - if (data) { + if (!IS_ERR_OR_NULL(data)) { cpufreq_cooling_unregister(data->cool_dev); if (data->policy) cpufreq_cpu_put(data->policy); |