summaryrefslogtreecommitdiff
path: root/drivers/thermal
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/thermal')
-rw-r--r--drivers/thermal/Kconfig32
-rw-r--r--drivers/thermal/Makefile5
-rw-r--r--drivers/thermal/armada_thermal.c20
-rw-r--r--drivers/thermal/clock_cooling.c485
-rw-r--r--drivers/thermal/int340x_thermal/acpi_thermal_rel.c12
-rw-r--r--drivers/thermal/int340x_thermal/int3400_thermal.c80
-rw-r--r--drivers/thermal/int340x_thermal/int3403_thermal.c4
-rw-r--r--drivers/thermal/intel_powerclamp.c1
-rw-r--r--drivers/thermal/intel_soc_dts_thermal.c12
-rw-r--r--drivers/thermal/of-thermal.c148
-rw-r--r--drivers/thermal/rockchip_thermal.c693
-rw-r--r--drivers/thermal/samsung/exynos_thermal_common.h1
-rw-r--r--drivers/thermal/samsung/exynos_tmu.c692
-rw-r--r--drivers/thermal/samsung/exynos_tmu.h123
-rw-r--r--drivers/thermal/samsung/exynos_tmu_data.c239
-rw-r--r--drivers/thermal/samsung/exynos_tmu_data.h159
-rw-r--r--drivers/thermal/tegra_soctherm.c476
-rw-r--r--drivers/thermal/thermal_core.c8
-rw-r--r--drivers/thermal/thermal_core.h18
-rw-r--r--drivers/thermal/ti-soc-thermal/ti-thermal-common.c8
20 files changed, 2407 insertions, 809 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index f554d25b4399..af40db0df58e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -112,6 +112,18 @@ config CPU_THERMAL
If you want this support, you should say Y here.
+config CLOCK_THERMAL
+ bool "Generic clock cooling support"
+ depends on COMMON_CLK
+ depends on PM_OPP
+ help
+ This entry implements the generic clock cooling mechanism through
+ frequency clipping. Typically used to cool off co-processors. The
+ device that is configured to use this cooling mechanism will be
+ controlled to reduce clock frequency whenever temperature is high.
+
+ If you want this support, you should say Y here.
+
config THERMAL_EMULATION
bool "Thermal emulation mode support"
help
@@ -143,6 +155,16 @@ config SPEAR_THERMAL
Enable this to plug the SPEAr thermal sensor driver into the Linux
thermal framework.
+config ROCKCHIP_THERMAL
+ tristate "Rockchip thermal driver"
+ depends on ARCH_ROCKCHIP
+ depends on RESET_CONTROLLER
+ help
+ Rockchip thermal driver provides support for Temperature sensor
+ ADC (TS-ADC) found on Rockchip SoCs. It supports one critical
+ trip point. Cpufreq is used as the cooling device and will throttle
+ CPUs when the Temperature crosses the passive trip point.
+
config RCAR_THERMAL
tristate "Renesas R-Car thermal driver"
depends on ARCH_SHMOBILE || COMPILE_TEST
@@ -185,6 +207,16 @@ config ARMADA_THERMAL
Enable this option if you want to have support for thermal management
controller present in Armada 370 and Armada XP SoC.
+config TEGRA_SOCTHERM
+ tristate "Tegra SOCTHERM thermal management"
+ depends on ARCH_TEGRA
+ help
+ Enable this option for integrated thermal management support on NVIDIA
+ Tegra124 systems-on-chip. The driver supports four thermal zones
+ (CPU, GPU, MEM, PLLX). Cooling devices can be bound to the thermal
+ zones to manage temperatures. This option is also required for the
+ emergency thermal reset (thermtrip) feature to function.
+
config DB8500_CPUFREQ_COOLING
tristate "DB8500 cpufreq cooling"
depends on ARCH_U8500
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 39c4fe87da2f..fa0dc486790f 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -18,8 +18,12 @@ thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o
# cpufreq cooling
thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
+# clock cooling
+thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o
+
# platform thermal drivers
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
+obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o
obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o
obj-y += samsung/
@@ -34,3 +38,4 @@ obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
obj-$(CONFIG_ST_THERMAL) += st/
+obj-$(CONFIG_TEGRA_SOCTHERM) += tegra_soctherm.o
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
index eaaf59c98ba2..c2556cf5186b 100644
--- a/drivers/thermal/armada_thermal.c
+++ b/drivers/thermal/armada_thermal.c
@@ -35,10 +35,6 @@
#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30)
#define PMU_TDC0_START_CAL_MASK (0x1 << 25)
-#define A375_Z1_CAL_RESET_LSB 0x8011e214
-#define A375_Z1_CAL_RESET_MSB 0x30a88019
-#define A375_Z1_WORKAROUND_BIT BIT(9)
-
#define A375_UNIT_CONTROL_SHIFT 27
#define A375_UNIT_CONTROL_MASK 0x7
#define A375_READOUT_INVERT BIT(15)
@@ -124,24 +120,12 @@ static void armada375_init_sensor(struct platform_device *pdev,
struct armada_thermal_priv *priv)
{
unsigned long reg;
- bool quirk_needed =
- !!of_device_is_compatible(pdev->dev.of_node,
- "marvell,armada375-z1-thermal");
-
- if (quirk_needed) {
- /* Ensure these registers have the default (reset) values */
- writel(A375_Z1_CAL_RESET_LSB, priv->control);
- writel(A375_Z1_CAL_RESET_MSB, priv->control + 0x4);
- }
reg = readl(priv->control + 4);
reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
reg &= ~A375_READOUT_INVERT;
reg &= ~A375_HW_RESETn;
- if (quirk_needed)
- reg |= A375_Z1_WORKAROUND_BIT;
-
writel(reg, priv->control + 4);
mdelay(20);
@@ -260,10 +244,6 @@ static const struct of_device_id armada_thermal_id_table[] = {
.data = &armada375_data,
},
{
- .compatible = "marvell,armada375-z1-thermal",
- .data = &armada375_data,
- },
- {
.compatible = "marvell,armada380-thermal",
.data = &armada380_data,
},
diff --git a/drivers/thermal/clock_cooling.c b/drivers/thermal/clock_cooling.c
new file mode 100644
index 000000000000..1b4ff0f4c716
--- /dev/null
+++ b/drivers/thermal/clock_cooling.c
@@ -0,0 +1,485 @@
+/*
+ * drivers/thermal/clock_cooling.c
+ *
+ * Copyright (C) 2014 Eduardo Valentin <edubezval@gmail.com>
+ *
+ * Copyright (C) 2013 Texas Instruments Inc.
+ * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
+ *
+ * Highly based on cpu_cooling.c.
+ * Copyright (C) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com)
+ * Copyright (C) 2012 Amit Daniel <amit.kachhap@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/idr.h>
+#include <linux/mutex.h>
+#include <linux/pm_opp.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <linux/clock_cooling.h>
+
+/**
+ * struct clock_cooling_device - data for cooling device with clock
+ * @id: unique integer value corresponding to each clock_cooling_device
+ * registered.
+ * @dev: struct device pointer to the device being used to cool off using
+ * clock frequencies.
+ * @cdev: thermal_cooling_device pointer to keep track of the
+ * registered cooling device.
+ * @clk_rate_change_nb: reference to notifier block used to receive clock
+ * rate changes.
+ * @freq_table: frequency table used to keep track of available frequencies.
+ * @clock_state: integer value representing the current state of clock
+ * cooling devices.
+ * @clock_val: integer value representing the absolute value of the clipped
+ * frequency.
+ * @clk: struct clk reference used to enforce clock limits.
+ * @lock: mutex lock to protect this struct.
+ *
+ * This structure is required for keeping information of each
+ * clock_cooling_device registered. In order to prevent corruption of this a
+ * mutex @lock is used.
+ */
+struct clock_cooling_device {
+ int id;
+ struct device *dev;
+ struct thermal_cooling_device *cdev;
+ struct notifier_block clk_rate_change_nb;
+ struct cpufreq_frequency_table *freq_table;
+ unsigned long clock_state;
+ unsigned long clock_val;
+ struct clk *clk;
+ struct mutex lock; /* lock to protect the content of this struct */
+};
+#define to_clock_cooling_device(x) \
+ container_of(x, struct clock_cooling_device, clk_rate_change_nb)
+static DEFINE_IDR(clock_idr);
+static DEFINE_MUTEX(cooling_clock_lock);
+
+/**
+ * clock_cooling_get_idr - function to get an unique id.
+ * @id: int * value generated by this function.
+ *
+ * This function will populate @id with an unique
+ * id, using the idr API.
+ *
+ * Return: 0 on success, an error code on failure.
+ */
+static int clock_cooling_get_idr(int *id)
+{
+ int ret;
+
+ mutex_lock(&cooling_clock_lock);
+ ret = idr_alloc(&clock_idr, NULL, 0, 0, GFP_KERNEL);
+ mutex_unlock(&cooling_clock_lock);
+ if (unlikely(ret < 0))
+ return ret;
+ *id = ret;
+
+ return 0;
+}
+
+/**
+ * release_idr - function to free the unique id.
+ * @id: int value representing the unique id.
+ */
+static void release_idr(int id)
+{
+ mutex_lock(&cooling_clock_lock);
+ idr_remove(&clock_idr, id);
+ mutex_unlock(&cooling_clock_lock);
+}
+
+/* Below code defines functions to be used for clock as cooling device */
+
+enum clock_cooling_property {
+ GET_LEVEL,
+ GET_FREQ,
+ GET_MAXL,
+};
+
+/**
+ * clock_cooling_get_property - fetch a property of interest for a give cpu.
+ * @ccdev: clock cooling device reference
+ * @input: query parameter
+ * @output: query return
+ * @property: type of query (frequency, level, max level)
+ *
+ * This is the common function to
+ * 1. get maximum clock cooling states
+ * 2. translate frequency to cooling state
+ * 3. translate cooling state to frequency
+ * Note that the code may be not in good shape
+ * but it is written in this way in order to:
+ * a) reduce duplicate code as most of the code can be shared.
+ * b) make sure the logic is consistent when translating between
+ * cooling states and frequencies.
+ *
+ * Return: 0 on success, -EINVAL when invalid parameters are passed.
+ */
+static int clock_cooling_get_property(struct clock_cooling_device *ccdev,
+ unsigned long input,
+ unsigned long *output,
+ enum clock_cooling_property property)
+{
+ int i;
+ unsigned long max_level = 0, level = 0;
+ unsigned int freq = CPUFREQ_ENTRY_INVALID;
+ int descend = -1;
+ struct cpufreq_frequency_table *pos, *table = ccdev->freq_table;
+
+ if (!output)
+ return -EINVAL;
+
+ if (!table)
+ return -EINVAL;
+
+ cpufreq_for_each_valid_entry(pos, table) {
+ /* ignore duplicate entry */
+ if (freq == pos->frequency)
+ continue;
+
+ /* get the frequency order */
+ if (freq != CPUFREQ_ENTRY_INVALID && descend == -1)
+ descend = freq > pos->frequency;
+
+ freq = pos->frequency;
+ max_level++;
+ }
+
+ /* No valid cpu frequency entry */
+ if (max_level == 0)
+ return -EINVAL;
+
+ /* max_level is an index, not a counter */
+ max_level--;
+
+ /* get max level */
+ if (property == GET_MAXL) {
+ *output = max_level;
+ return 0;
+ }
+
+ if (property == GET_FREQ)
+ level = descend ? input : (max_level - input);
+
+ i = 0;
+ cpufreq_for_each_valid_entry(pos, table) {
+ /* ignore duplicate entry */
+ if (freq == pos->frequency)
+ continue;
+
+ /* now we have a valid frequency entry */
+ freq = pos->frequency;
+
+ if (property == GET_LEVEL && (unsigned int)input == freq) {
+ /* get level by frequency */
+ *output = descend ? i : (max_level - i);
+ return 0;
+ }
+ if (property == GET_FREQ && level == i) {
+ /* get frequency by level */
+ *output = freq;
+ return 0;
+ }
+ i++;
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * clock_cooling_get_level - return the cooling level of given clock cooling.
+ * @cdev: reference of a thermal cooling device of used as clock cooling device
+ * @freq: the frequency of interest
+ *
+ * This function will match the cooling level corresponding to the
+ * requested @freq and return it.
+ *
+ * Return: The matched cooling level on success or THERMAL_CSTATE_INVALID
+ * otherwise.
+ */
+unsigned long clock_cooling_get_level(struct thermal_cooling_device *cdev,
+ unsigned long freq)
+{
+ struct clock_cooling_device *ccdev = cdev->devdata;
+ unsigned long val;
+
+ if (clock_cooling_get_property(ccdev, (unsigned long)freq, &val,
+ GET_LEVEL))
+ return THERMAL_CSTATE_INVALID;
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(clock_cooling_get_level);
+
+/**
+ * clock_cooling_get_frequency - get the absolute value of frequency from level.
+ * @ccdev: clock cooling device reference
+ * @level: cooling level
+ *
+ * This function matches cooling level with frequency. Based on a cooling level
+ * of frequency, equals cooling state of cpu cooling device, it will return
+ * the corresponding frequency.
+ * e.g level=0 --> 1st MAX FREQ, level=1 ---> 2nd MAX FREQ, .... etc
+ *
+ * Return: 0 on error, the corresponding frequency otherwise.
+ */
+static unsigned long
+clock_cooling_get_frequency(struct clock_cooling_device *ccdev,
+ unsigned long level)
+{
+ int ret = 0;
+ unsigned long freq;
+
+ ret = clock_cooling_get_property(ccdev, level, &freq, GET_FREQ);
+ if (ret)
+ return 0;
+
+ return freq;
+}
+
+/**
+ * clock_cooling_apply - function to apply frequency clipping.
+ * @ccdev: clock_cooling_device pointer containing frequency clipping data.
+ * @cooling_state: value of the cooling state.
+ *
+ * Function used to make sure the clock layer is aware of current thermal
+ * limits. The limits are applied by updating the clock rate in case it is
+ * higher than the corresponding frequency based on the requested cooling_state.
+ *
+ * Return: 0 on success, an error code otherwise (-EINVAL in case wrong
+ * cooling state).
+ */
+static int clock_cooling_apply(struct clock_cooling_device *ccdev,
+ unsigned long cooling_state)
+{
+ unsigned long clip_freq, cur_freq;
+ int ret = 0;
+
+ /* Here we write the clipping */
+ /* Check if the old cooling action is same as new cooling action */
+ if (ccdev->clock_state == cooling_state)
+ return 0;
+
+ clip_freq = clock_cooling_get_frequency(ccdev, cooling_state);
+ if (!clip_freq)
+ return -EINVAL;
+
+ cur_freq = clk_get_rate(ccdev->clk);
+
+ mutex_lock(&ccdev->lock);
+ ccdev->clock_state = cooling_state;
+ ccdev->clock_val = clip_freq;
+ /* enforce clock level */
+ if (cur_freq > clip_freq)
+ ret = clk_set_rate(ccdev->clk, clip_freq);
+ mutex_unlock(&ccdev->lock);
+
+ return ret;
+}
+
+/**
+ * clock_cooling_clock_notifier - notifier callback on clock rate changes.
+ * @nb: struct notifier_block * with callback info.
+ * @event: value showing clock event for which this function invoked.
+ * @data: callback-specific data
+ *
+ * Callback to hijack the notification on clock transition.
+ * Every time there is a clock change, we intercept all pre change events
+ * and block the transition in case the new rate infringes thermal limits.
+ *
+ * Return: NOTIFY_DONE (success) or NOTIFY_BAD (new_rate > thermal limit).
+ */
+static int clock_cooling_clock_notifier(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct clk_notifier_data *ndata = data;
+ struct clock_cooling_device *ccdev = to_clock_cooling_device(nb);
+
+ switch (event) {
+ case PRE_RATE_CHANGE:
+ /*
+ * checks on current state
+ * TODO: current method is not best we can find as it
+ * allows possibly voltage transitions, in case DVFS
+ * layer is also hijacking clock pre notifications.
+ */
+ if (ndata->new_rate > ccdev->clock_val)
+ return NOTIFY_BAD;
+ /* fall through */
+ case POST_RATE_CHANGE:
+ case ABORT_RATE_CHANGE:
+ default:
+ return NOTIFY_DONE;
+ }
+}
+
+/* clock cooling device thermal callback functions are defined below */
+
+/**
+ * clock_cooling_get_max_state - callback function to get the max cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the max cooling state.
+ *
+ * Callback for the thermal cooling device to return the clock
+ * max cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int clock_cooling_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct clock_cooling_device *ccdev = cdev->devdata;
+ unsigned long count = 0;
+ int ret;
+
+ ret = clock_cooling_get_property(ccdev, 0, &count, GET_MAXL);
+ if (!ret)
+ *state = count;
+
+ return ret;
+}
+
+/**
+ * clock_cooling_get_cur_state - function to get the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: fill this variable with the current cooling state.
+ *
+ * Callback for the thermal cooling device to return the clock
+ * current cooling state.
+ *
+ * Return: 0 (success)
+ */
+static int clock_cooling_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct clock_cooling_device *ccdev = cdev->devdata;
+
+ *state = ccdev->clock_state;
+
+ return 0;
+}
+
+/**
+ * clock_cooling_set_cur_state - function to set the current cooling state.
+ * @cdev: thermal cooling device pointer.
+ * @state: set this variable to the current cooling state.
+ *
+ * Callback for the thermal cooling device to change the clock cooling
+ * current cooling state.
+ *
+ * Return: 0 on success, an error code otherwise.
+ */
+static int clock_cooling_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ struct clock_cooling_device *clock_device = cdev->devdata;
+
+ return clock_cooling_apply(clock_device, state);
+}
+
+/* Bind clock callbacks to thermal cooling device ops */
+static struct thermal_cooling_device_ops const clock_cooling_ops = {
+ .get_max_state = clock_cooling_get_max_state,
+ .get_cur_state = clock_cooling_get_cur_state,
+ .set_cur_state = clock_cooling_set_cur_state,
+};
+
+/**
+ * clock_cooling_register - function to create clock cooling device.
+ * @dev: struct device pointer to the device used as clock cooling device.
+ * @clock_name: string containing the clock used as cooling mechanism.
+ *
+ * This interface function registers the clock cooling device with the name
+ * "thermal-clock-%x". The cooling device is based on clock frequencies.
+ * The struct device is assumed to be capable of DVFS transitions.
+ * The OPP layer is used to fetch and fill the available frequencies for
+ * the referred device. The ordered frequency table is used to control
+ * the clock cooling device cooling states and to limit clock transitions
+ * based on the cooling state requested by the thermal framework.
+ *
+ * Return: a valid struct thermal_cooling_device pointer on success,
+ * on failure, it returns a corresponding ERR_PTR().
+ */
+struct thermal_cooling_device *
+clock_cooling_register(struct device *dev, const char *clock_name)
+{
+ struct thermal_cooling_device *cdev;
+ struct clock_cooling_device *ccdev = NULL;
+ char dev_name[THERMAL_NAME_LENGTH];
+ int ret = 0;
+
+ ccdev = devm_kzalloc(dev, sizeof(*ccdev), GFP_KERNEL);
+ if (!ccdev)
+ return ERR_PTR(-ENOMEM);
+
+ ccdev->dev = dev;
+ ccdev->clk = devm_clk_get(dev, clock_name);
+ if (IS_ERR(ccdev->clk))
+ return ERR_CAST(ccdev->clk);
+
+ ret = clock_cooling_get_idr(&ccdev->id);
+ if (ret)
+ return ERR_PTR(-EINVAL);
+
+ snprintf(dev_name, sizeof(dev_name), "thermal-clock-%d", ccdev->id);
+
+ cdev = thermal_cooling_device_register(dev_name, ccdev,
+ &clock_cooling_ops);
+ if (IS_ERR(cdev)) {
+ release_idr(ccdev->id);
+ return ERR_PTR(-EINVAL);
+ }
+ ccdev->cdev = cdev;
+ ccdev->clk_rate_change_nb.notifier_call = clock_cooling_clock_notifier;
+
+ /* Assuming someone has already filled the opp table for this device */
+ ret = dev_pm_opp_init_cpufreq_table(dev, &ccdev->freq_table);
+ if (ret) {
+ release_idr(ccdev->id);
+ return ERR_PTR(ret);
+ }
+ ccdev->clock_state = 0;
+ ccdev->clock_val = clock_cooling_get_frequency(ccdev, 0);
+
+ clk_notifier_register(ccdev->clk, &ccdev->clk_rate_change_nb);
+
+ return cdev;
+}
+EXPORT_SYMBOL_GPL(clock_cooling_register);
+
+/**
+ * clock_cooling_unregister - function to remove clock cooling device.
+ * @cdev: thermal cooling device pointer.
+ *
+ * This interface function unregisters the "thermal-clock-%x" cooling device.
+ */
+void clock_cooling_unregister(struct thermal_cooling_device *cdev)
+{
+ struct clock_cooling_device *ccdev;
+
+ if (!cdev)
+ return;
+
+ ccdev = cdev->devdata;
+
+ clk_notifier_unregister(ccdev->clk, &ccdev->clk_rate_change_nb);
+ dev_pm_opp_free_cpufreq_table(ccdev->dev, &ccdev->freq_table);
+
+ thermal_cooling_device_unregister(ccdev->cdev);
+ release_idr(ccdev->id);
+}
+EXPORT_SYMBOL_GPL(clock_cooling_unregister);
diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
index 0d8db808f0ae..e4e61b3fb11e 100644
--- a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
+++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c
@@ -131,6 +131,8 @@ int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp,
pr_warn("Failed to get target ACPI device\n");
}
+ result = 0;
+
*trtp = trts;
/* don't count bad entries */
*trt_count -= nr_bad_entries;
@@ -317,21 +319,21 @@ static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd,
{
int ret = 0;
unsigned long length = 0;
- unsigned long count = 0;
+ int count = 0;
char __user *arg = (void __user *)__arg;
struct trt *trts;
struct art *arts;
switch (cmd) {
case ACPI_THERMAL_GET_TRT_COUNT:
- ret = acpi_parse_trt(acpi_thermal_rel_handle, (int *)&count,
+ ret = acpi_parse_trt(acpi_thermal_rel_handle, &count,
&trts, false);
kfree(trts);
if (!ret)
return put_user(count, (unsigned long __user *)__arg);
return ret;
case ACPI_THERMAL_GET_TRT_LEN:
- ret = acpi_parse_trt(acpi_thermal_rel_handle, (int *)&count,
+ ret = acpi_parse_trt(acpi_thermal_rel_handle, &count,
&trts, false);
kfree(trts);
length = count * sizeof(union trt_object);
@@ -341,14 +343,14 @@ static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd,
case ACPI_THERMAL_GET_TRT:
return fill_trt(arg);
case ACPI_THERMAL_GET_ART_COUNT:
- ret = acpi_parse_art(acpi_thermal_rel_handle, (int *)&count,
+ ret = acpi_parse_art(acpi_thermal_rel_handle, &count,
&arts, false);
kfree(arts);
if (!ret)
return put_user(count, (unsigned long __user *)__arg);
return ret;
case ACPI_THERMAL_GET_ART_LEN:
- ret = acpi_parse_art(acpi_thermal_rel_handle, (int *)&count,
+ ret = acpi_parse_art(acpi_thermal_rel_handle, &count,
&arts, false);
kfree(arts);
length = count * sizeof(union art_object);
diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c
index edc1cce117ba..dcb306ea14a4 100644
--- a/drivers/thermal/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3400_thermal.c
@@ -43,6 +43,74 @@ struct int3400_thermal_priv {
struct trt *trts;
u8 uuid_bitmap;
int rel_misc_dev_res;
+ int current_uuid_index;
+};
+
+static ssize_t available_uuids_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct int3400_thermal_priv *priv = platform_get_drvdata(pdev);
+ int i;
+ int length = 0;
+
+ for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; i++) {
+ if (priv->uuid_bitmap & (1 << i))
+ if (PAGE_SIZE - length > 0)
+ length += snprintf(&buf[length],
+ PAGE_SIZE - length,
+ "%s\n",
+ int3400_thermal_uuids[i]);
+ }
+
+ return length;
+}
+
+static ssize_t current_uuid_show(struct device *dev,
+ struct device_attribute *devattr, char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct int3400_thermal_priv *priv = platform_get_drvdata(pdev);
+
+ if (priv->uuid_bitmap & (1 << priv->current_uuid_index))
+ return sprintf(buf, "%s\n",
+ int3400_thermal_uuids[priv->current_uuid_index]);
+ else
+ return sprintf(buf, "INVALID\n");
+}
+
+static ssize_t current_uuid_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct int3400_thermal_priv *priv = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < INT3400_THERMAL_MAXIMUM_UUID; ++i) {
+ if ((priv->uuid_bitmap & (1 << i)) &&
+ !(strncmp(buf, int3400_thermal_uuids[i],
+ sizeof(int3400_thermal_uuids[i]) - 1))) {
+ priv->current_uuid_index = i;
+ return count;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(current_uuid, 0644, current_uuid_show, current_uuid_store);
+static DEVICE_ATTR_RO(available_uuids);
+static struct attribute *uuid_attrs[] = {
+ &dev_attr_available_uuids.attr,
+ &dev_attr_current_uuid.attr,
+ NULL
+};
+
+static struct attribute_group uuid_attribute_group = {
+ .attrs = uuid_attrs,
+ .name = "uuids"
};
static int int3400_thermal_get_uuids(struct int3400_thermal_priv *priv)
@@ -160,9 +228,9 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
if (enable != priv->mode) {
priv->mode = enable;
- /* currently, only PASSIVE COOLING is supported */
result = int3400_thermal_run_osc(priv->adev->handle,
- INT3400_THERMAL_PASSIVE_1, enable);
+ priv->current_uuid_index,
+ enable);
}
return result;
}
@@ -223,7 +291,14 @@ static int int3400_thermal_probe(struct platform_device *pdev)
priv->rel_misc_dev_res = acpi_thermal_rel_misc_device_add(
priv->adev->handle);
+ result = sysfs_create_group(&pdev->dev.kobj, &uuid_attribute_group);
+ if (result)
+ goto free_zone;
+
return 0;
+
+free_zone:
+ thermal_zone_device_unregister(priv->thermal);
free_trt:
kfree(priv->trts);
free_art:
@@ -240,6 +315,7 @@ static int int3400_thermal_remove(struct platform_device *pdev)
if (!priv->rel_misc_dev_res)
acpi_thermal_rel_misc_device_remove(priv->adev->handle);
+ sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
thermal_zone_device_unregister(priv->thermal);
kfree(priv->trts);
kfree(priv->arts);
diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c
index 6e9fb62eb817..1bfa6a69e77a 100644
--- a/drivers/thermal/int340x_thermal/int3403_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3403_thermal.c
@@ -293,8 +293,7 @@ static int int3403_sensor_add(struct int3403_priv *priv)
return 0;
err_free_obj:
- if (obj->tzone)
- thermal_zone_device_unregister(obj->tzone);
+ thermal_zone_device_unregister(obj->tzone);
return result;
}
@@ -471,7 +470,6 @@ static struct platform_driver int3403_driver = {
.remove = int3403_remove,
.driver = {
.name = "int3403 thermal",
- .owner = THIS_MODULE,
.acpi_match_table = int3403_device_ids,
},
};
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index 95cb7fc20e17..b46c706e1cac 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -689,6 +689,7 @@ static const struct x86_cpu_id intel_powerclamp_ids[] = {
{ X86_VENDOR_INTEL, 6, 0x3f},
{ X86_VENDOR_INTEL, 6, 0x45},
{ X86_VENDOR_INTEL, 6, 0x46},
+ { X86_VENDOR_INTEL, 6, 0x4c},
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids);
diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel_soc_dts_thermal.c
index a6a0a18ec0aa..5580f5b24eb9 100644
--- a/drivers/thermal/intel_soc_dts_thermal.c
+++ b/drivers/thermal/intel_soc_dts_thermal.c
@@ -360,6 +360,9 @@ static void proc_thermal_interrupt(void)
u32 sticky_out;
int status;
u32 ptmc_out;
+ unsigned long flags;
+
+ spin_lock_irqsave(&intr_notify_lock, flags);
/* Clear APIC interrupt */
status = iosf_mbi_read(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_READ,
@@ -378,21 +381,20 @@ static void proc_thermal_interrupt(void)
/* reset sticky bit */
status = iosf_mbi_write(BT_MBI_UNIT_PMC, BT_MBI_BUNIT_WRITE,
SOC_DTS_OFFSET_PTTSS, sticky_out);
+ spin_unlock_irqrestore(&intr_notify_lock, flags);
+
for (i = 0; i < SOC_MAX_DTS_SENSORS; ++i) {
pr_debug("TZD update for zone %d\n", i);
thermal_zone_device_update(soc_dts[i]->tzone);
}
- }
+ } else
+ spin_unlock_irqrestore(&intr_notify_lock, flags);
}
static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data)
{
- unsigned long flags;
-
- spin_lock_irqsave(&intr_notify_lock, flags);
proc_thermal_interrupt();
- spin_unlock_irqrestore(&intr_notify_lock, flags);
pr_debug("proc_thermal_interrupt\n");
return IRQ_HANDLED;
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index 62143ba31001..e145b66df444 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -30,27 +30,13 @@
#include <linux/err.h>
#include <linux/export.h>
#include <linux/string.h>
+#include <linux/thermal.h>
#include "thermal_core.h"
/*** Private data structures to represent thermal device tree data ***/
/**
- * struct __thermal_trip - representation of a point in temperature domain
- * @np: pointer to struct device_node that this trip point was created from
- * @temperature: temperature value in miliCelsius
- * @hysteresis: relative hysteresis in miliCelsius
- * @type: trip point type
- */
-
-struct __thermal_trip {
- struct device_node *np;
- unsigned long int temperature;
- unsigned long int hysteresis;
- enum thermal_trip_type type;
-};
-
-/**
* struct __thermal_bind_param - a match between trip and cooling device
* @cooling_device: a pointer to identify the referred cooling device
* @trip_id: the trip point index
@@ -77,8 +63,7 @@ struct __thermal_bind_params {
* @num_tbps: number of thermal bind params
* @tbps: an array of thermal bind params (0..num_tbps - 1)
* @sensor_data: sensor private data used while reading temperature and trend
- * @get_temp: sensor callback to read temperature
- * @get_trend: sensor callback to read temperature trend
+ * @ops: set of callbacks to handle the thermal zone based on DT
*/
struct __thermal_zone {
@@ -88,7 +73,7 @@ struct __thermal_zone {
/* trip data */
int ntrips;
- struct __thermal_trip *trips;
+ struct thermal_trip *trips;
/* cooling binding data */
int num_tbps;
@@ -96,8 +81,7 @@ struct __thermal_zone {
/* sensor interface */
void *sensor_data;
- int (*get_temp)(void *, long *);
- int (*get_trend)(void *, long *);
+ const struct thermal_zone_of_device_ops *ops;
};
/*** DT thermal zone device callbacks ***/
@@ -107,10 +91,96 @@ static int of_thermal_get_temp(struct thermal_zone_device *tz,
{
struct __thermal_zone *data = tz->devdata;
- if (!data->get_temp)
+ if (!data->ops->get_temp)
return -EINVAL;
- return data->get_temp(data->sensor_data, temp);
+ return data->ops->get_temp(data->sensor_data, temp);
+}
+
+/**
+ * of_thermal_get_ntrips - function to export number of available trip
+ * points.
+ * @tz: pointer to a thermal zone
+ *
+ * This function is a globally visible wrapper to get number of trip points
+ * stored in the local struct __thermal_zone
+ *
+ * Return: number of available trip points, -ENODEV when data not available
+ */
+int of_thermal_get_ntrips(struct thermal_zone_device *tz)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (!data || IS_ERR(data))
+ return -ENODEV;
+
+ return data->ntrips;
+}
+EXPORT_SYMBOL_GPL(of_thermal_get_ntrips);
+
+/**
+ * of_thermal_is_trip_valid - function to check if trip point is valid
+ *
+ * @tz: pointer to a thermal zone
+ * @trip: trip point to evaluate
+ *
+ * This function is responsible for checking if passed trip point is valid
+ *
+ * Return: true if trip point is valid, false otherwise
+ */
+bool of_thermal_is_trip_valid(struct thermal_zone_device *tz, int trip)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (!data || trip >= data->ntrips || trip < 0)
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(of_thermal_is_trip_valid);
+
+/**
+ * of_thermal_get_trip_points - function to get access to a globally exported
+ * trip points
+ *
+ * @tz: pointer to a thermal zone
+ *
+ * This function provides a pointer to trip points table
+ *
+ * Return: pointer to trip points table, NULL otherwise
+ */
+const struct thermal_trip * const
+of_thermal_get_trip_points(struct thermal_zone_device *tz)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (!data)
+ return NULL;
+
+ return data->trips;
+}
+EXPORT_SYMBOL_GPL(of_thermal_get_trip_points);
+
+/**
+ * of_thermal_set_emul_temp - function to set emulated temperature
+ *
+ * @tz: pointer to a thermal zone
+ * @temp: temperature to set
+ *
+ * This function gives the ability to set emulated value of temperature,
+ * which is handy for debugging
+ *
+ * Return: zero on success, error code otherwise
+ */
+static int of_thermal_set_emul_temp(struct thermal_zone_device *tz,
+ unsigned long temp)
+{
+ struct __thermal_zone *data = tz->devdata;
+
+ if (!data->ops || !data->ops->set_emul_temp)
+ return -EINVAL;
+
+ return data->ops->set_emul_temp(data->sensor_data, temp);
}
static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
@@ -120,10 +190,10 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
long dev_trend;
int r;
- if (!data->get_trend)
+ if (!data->ops->get_trend)
return -EINVAL;
- r = data->get_trend(data->sensor_data, &dev_trend);
+ r = data->ops->get_trend(data->sensor_data, &dev_trend);
if (r)
return r;
@@ -324,8 +394,7 @@ static struct thermal_zone_device_ops of_thermal_ops = {
static struct thermal_zone_device *
thermal_zone_of_add_sensor(struct device_node *zone,
struct device_node *sensor, void *data,
- int (*get_temp)(void *, long *),
- int (*get_trend)(void *, long *))
+ const struct thermal_zone_of_device_ops *ops)
{
struct thermal_zone_device *tzd;
struct __thermal_zone *tz;
@@ -336,13 +405,16 @@ thermal_zone_of_add_sensor(struct device_node *zone,
tz = tzd->devdata;
+ if (!ops)
+ return ERR_PTR(-EINVAL);
+
mutex_lock(&tzd->lock);
- tz->get_temp = get_temp;
- tz->get_trend = get_trend;
+ tz->ops = ops;
tz->sensor_data = data;
tzd->ops->get_temp = of_thermal_get_temp;
tzd->ops->get_trend = of_thermal_get_trend;
+ tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
mutex_unlock(&tzd->lock);
return tzd;
@@ -356,8 +428,7 @@ thermal_zone_of_add_sensor(struct device_node *zone,
* than one sensors
* @data: a private pointer (owned by the caller) that will be passed
* back, when a temperature reading is needed.
- * @get_temp: a pointer to a function that reads the sensor temperature.
- * @get_trend: a pointer to a function that reads the sensor temperature trend.
+ * @ops: struct thermal_zone_of_device_ops *. Must contain at least .get_temp.
*
* This function will search the list of thermal zones described in device
* tree and look for the zone that refer to the sensor device pointed by
@@ -382,9 +453,8 @@ thermal_zone_of_add_sensor(struct device_node *zone,
* check the return value with help of IS_ERR() helper.
*/
struct thermal_zone_device *
-thermal_zone_of_sensor_register(struct device *dev, int sensor_id,
- void *data, int (*get_temp)(void *, long *),
- int (*get_trend)(void *, long *))
+thermal_zone_of_sensor_register(struct device *dev, int sensor_id, void *data,
+ const struct thermal_zone_of_device_ops *ops)
{
struct device_node *np, *child, *sensor_np;
struct thermal_zone_device *tzd = ERR_PTR(-ENODEV);
@@ -426,9 +496,7 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id,
if (sensor_specs.np == sensor_np && id == sensor_id) {
tzd = thermal_zone_of_add_sensor(child, sensor_np,
- data,
- get_temp,
- get_trend);
+ data, ops);
of_node_put(sensor_specs.np);
of_node_put(child);
goto exit;
@@ -475,9 +543,9 @@ void thermal_zone_of_sensor_unregister(struct device *dev,
mutex_lock(&tzd->lock);
tzd->ops->get_temp = NULL;
tzd->ops->get_trend = NULL;
+ tzd->ops->set_emul_temp = NULL;
- tz->get_temp = NULL;
- tz->get_trend = NULL;
+ tz->ops = NULL;
tz->sensor_data = NULL;
mutex_unlock(&tzd->lock);
}
@@ -501,7 +569,7 @@ EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_unregister);
*/
static int thermal_of_populate_bind_params(struct device_node *np,
struct __thermal_bind_params *__tbp,
- struct __thermal_trip *trips,
+ struct thermal_trip *trips,
int ntrips)
{
struct of_phandle_args cooling_spec;
@@ -604,7 +672,7 @@ static int thermal_of_get_trip_type(struct device_node *np,
* Return: 0 on success, proper error code otherwise
*/
static int thermal_of_populate_trip(struct device_node *np,
- struct __thermal_trip *trip)
+ struct thermal_trip *trip)
{
int prop;
int ret;
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
new file mode 100644
index 000000000000..1bcddfc60e91
--- /dev/null
+++ b/drivers/thermal/rockchip_thermal.c
@@ -0,0 +1,693 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+
+/**
+ * If the temperature over a period of time High,
+ * the resulting TSHUT gave CRU module,let it reset the entire chip,
+ * or via GPIO give PMIC.
+ */
+enum tshut_mode {
+ TSHUT_MODE_CRU = 0,
+ TSHUT_MODE_GPIO,
+};
+
+/**
+ * the system Temperature Sensors tshut(tshut) polarity
+ * the bit 8 is tshut polarity.
+ * 0: low active, 1: high active
+ */
+enum tshut_polarity {
+ TSHUT_LOW_ACTIVE = 0,
+ TSHUT_HIGH_ACTIVE,
+};
+
+/**
+ * The system has three Temperature Sensors. channel 0 is reserved,
+ * channel 1 is for CPU, and channel 2 is for GPU.
+ */
+enum sensor_id {
+ SENSOR_CPU = 1,
+ SENSOR_GPU,
+};
+
+struct rockchip_tsadc_chip {
+ /* The hardware-controlled tshut property */
+ long tshut_temp;
+ enum tshut_mode tshut_mode;
+ enum tshut_polarity tshut_polarity;
+
+ /* Chip-wide methods */
+ void (*initialize)(void __iomem *reg, enum tshut_polarity p);
+ void (*irq_ack)(void __iomem *reg);
+ void (*control)(void __iomem *reg, bool on);
+
+ /* Per-sensor methods */
+ int (*get_temp)(int chn, void __iomem *reg, long *temp);
+ void (*set_tshut_temp)(int chn, void __iomem *reg, long temp);
+ void (*set_tshut_mode)(int chn, void __iomem *reg, enum tshut_mode m);
+};
+
+struct rockchip_thermal_sensor {
+ struct rockchip_thermal_data *thermal;
+ struct thermal_zone_device *tzd;
+ enum sensor_id id;
+};
+
+#define NUM_SENSORS 2 /* Ignore unused sensor 0 */
+
+struct rockchip_thermal_data {
+ const struct rockchip_tsadc_chip *chip;
+ struct platform_device *pdev;
+ struct reset_control *reset;
+
+ struct rockchip_thermal_sensor sensors[NUM_SENSORS];
+
+ struct clk *clk;
+ struct clk *pclk;
+
+ void __iomem *regs;
+
+ long tshut_temp;
+ enum tshut_mode tshut_mode;
+ enum tshut_polarity tshut_polarity;
+};
+
+/* TSADC V2 Sensor info define: */
+#define TSADCV2_AUTO_CON 0x04
+#define TSADCV2_INT_EN 0x08
+#define TSADCV2_INT_PD 0x0c
+#define TSADCV2_DATA(chn) (0x20 + (chn) * 0x04)
+#define TSADCV2_COMP_SHUT(chn) (0x40 + (chn) * 0x04)
+#define TSADCV2_HIGHT_INT_DEBOUNCE 0x60
+#define TSADCV2_HIGHT_TSHUT_DEBOUNCE 0x64
+#define TSADCV2_AUTO_PERIOD 0x68
+#define TSADCV2_AUTO_PERIOD_HT 0x6c
+
+#define TSADCV2_AUTO_EN BIT(0)
+#define TSADCV2_AUTO_DISABLE ~BIT(0)
+#define TSADCV2_AUTO_SRC_EN(chn) BIT(4 + (chn))
+#define TSADCV2_AUTO_TSHUT_POLARITY_HIGH BIT(8)
+#define TSADCV2_AUTO_TSHUT_POLARITY_LOW ~BIT(8)
+
+#define TSADCV2_INT_SRC_EN(chn) BIT(chn)
+#define TSADCV2_SHUT_2GPIO_SRC_EN(chn) BIT(4 + (chn))
+#define TSADCV2_SHUT_2CRU_SRC_EN(chn) BIT(8 + (chn))
+
+#define TSADCV2_INT_PD_CLEAR ~BIT(8)
+
+#define TSADCV2_DATA_MASK 0xfff
+#define TSADCV2_HIGHT_INT_DEBOUNCE_COUNT 4
+#define TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT 4
+#define TSADCV2_AUTO_PERIOD_TIME 250 /* msec */
+#define TSADCV2_AUTO_PERIOD_HT_TIME 50 /* msec */
+
+struct tsadc_table {
+ unsigned long code;
+ long temp;
+};
+
+static const struct tsadc_table v2_code_table[] = {
+ {TSADCV2_DATA_MASK, -40000},
+ {3800, -40000},
+ {3792, -35000},
+ {3783, -30000},
+ {3774, -25000},
+ {3765, -20000},
+ {3756, -15000},
+ {3747, -10000},
+ {3737, -5000},
+ {3728, 0},
+ {3718, 5000},
+ {3708, 10000},
+ {3698, 15000},
+ {3688, 20000},
+ {3678, 25000},
+ {3667, 30000},
+ {3656, 35000},
+ {3645, 40000},
+ {3634, 45000},
+ {3623, 50000},
+ {3611, 55000},
+ {3600, 60000},
+ {3588, 65000},
+ {3575, 70000},
+ {3563, 75000},
+ {3550, 80000},
+ {3537, 85000},
+ {3524, 90000},
+ {3510, 95000},
+ {3496, 100000},
+ {3482, 105000},
+ {3467, 110000},
+ {3452, 115000},
+ {3437, 120000},
+ {3421, 125000},
+ {0, 125000},
+};
+
+static u32 rk_tsadcv2_temp_to_code(long temp)
+{
+ int high, low, mid;
+
+ low = 0;
+ high = ARRAY_SIZE(v2_code_table) - 1;
+ mid = (high + low) / 2;
+
+ if (temp < v2_code_table[low].temp || temp > v2_code_table[high].temp)
+ return 0;
+
+ while (low <= high) {
+ if (temp == v2_code_table[mid].temp)
+ return v2_code_table[mid].code;
+ else if (temp < v2_code_table[mid].temp)
+ high = mid - 1;
+ else
+ low = mid + 1;
+ mid = (low + high) / 2;
+ }
+
+ return 0;
+}
+
+static long rk_tsadcv2_code_to_temp(u32 code)
+{
+ int high, low, mid;
+
+ low = 0;
+ high = ARRAY_SIZE(v2_code_table) - 1;
+ mid = (high + low) / 2;
+
+ if (code > v2_code_table[low].code || code < v2_code_table[high].code)
+ return 125000; /* No code available, return max temperature */
+
+ while (low <= high) {
+ if (code >= v2_code_table[mid].code && code <
+ v2_code_table[mid - 1].code)
+ return v2_code_table[mid].temp;
+ else if (code < v2_code_table[mid].code)
+ low = mid + 1;
+ else
+ high = mid - 1;
+ mid = (low + high) / 2;
+ }
+
+ return 125000;
+}
+
+/**
+ * rk_tsadcv2_initialize - initialize TASDC Controller
+ * (1) Set TSADCV2_AUTO_PERIOD, configure the interleave between
+ * every two accessing of TSADC in normal operation.
+ * (2) Set TSADCV2_AUTO_PERIOD_HT, configure the interleave between
+ * every two accessing of TSADC after the temperature is higher
+ * than COM_SHUT or COM_INT.
+ * (3) Set TSADCV2_HIGH_INT_DEBOUNCE and TSADC_HIGHT_TSHUT_DEBOUNCE,
+ * if the temperature is higher than COMP_INT or COMP_SHUT for
+ * "debounce" times, TSADC controller will generate interrupt or TSHUT.
+ */
+static void rk_tsadcv2_initialize(void __iomem *regs,
+ enum tshut_polarity tshut_polarity)
+{
+ if (tshut_polarity == TSHUT_HIGH_ACTIVE)
+ writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_HIGH),
+ regs + TSADCV2_AUTO_CON);
+ else
+ writel_relaxed(0 | (TSADCV2_AUTO_TSHUT_POLARITY_LOW),
+ regs + TSADCV2_AUTO_CON);
+
+ writel_relaxed(TSADCV2_AUTO_PERIOD_TIME, regs + TSADCV2_AUTO_PERIOD);
+ writel_relaxed(TSADCV2_HIGHT_INT_DEBOUNCE_COUNT,
+ regs + TSADCV2_HIGHT_INT_DEBOUNCE);
+ writel_relaxed(TSADCV2_AUTO_PERIOD_HT_TIME,
+ regs + TSADCV2_AUTO_PERIOD_HT);
+ writel_relaxed(TSADCV2_HIGHT_TSHUT_DEBOUNCE_COUNT,
+ regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
+}
+
+static void rk_tsadcv2_irq_ack(void __iomem *regs)
+{
+ u32 val;
+
+ val = readl_relaxed(regs + TSADCV2_INT_PD);
+ writel_relaxed(val & TSADCV2_INT_PD_CLEAR, regs + TSADCV2_INT_PD);
+}
+
+static void rk_tsadcv2_control(void __iomem *regs, bool enable)
+{
+ u32 val;
+
+ val = readl_relaxed(regs + TSADCV2_AUTO_CON);
+ if (enable)
+ val |= TSADCV2_AUTO_EN;
+ else
+ val &= ~TSADCV2_AUTO_EN;
+
+ writel_relaxed(val, regs + TSADCV2_AUTO_CON);
+}
+
+static int rk_tsadcv2_get_temp(int chn, void __iomem *regs, long *temp)
+{
+ u32 val;
+
+ /* the A/D value of the channel last conversion need some time */
+ val = readl_relaxed(regs + TSADCV2_DATA(chn));
+ if (val == 0)
+ return -EAGAIN;
+
+ *temp = rk_tsadcv2_code_to_temp(val);
+
+ return 0;
+}
+
+static void rk_tsadcv2_tshut_temp(int chn, void __iomem *regs, long temp)
+{
+ u32 tshut_value, val;
+
+ tshut_value = rk_tsadcv2_temp_to_code(temp);
+ writel_relaxed(tshut_value, regs + TSADCV2_COMP_SHUT(chn));
+
+ /* TSHUT will be valid */
+ val = readl_relaxed(regs + TSADCV2_AUTO_CON);
+ writel_relaxed(val | TSADCV2_AUTO_SRC_EN(chn), regs + TSADCV2_AUTO_CON);
+}
+
+static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
+ enum tshut_mode mode)
+{
+ u32 val;
+
+ val = readl_relaxed(regs + TSADCV2_INT_EN);
+ if (mode == TSHUT_MODE_GPIO) {
+ val &= ~TSADCV2_SHUT_2CRU_SRC_EN(chn);
+ val |= TSADCV2_SHUT_2GPIO_SRC_EN(chn);
+ } else {
+ val &= ~TSADCV2_SHUT_2GPIO_SRC_EN(chn);
+ val |= TSADCV2_SHUT_2CRU_SRC_EN(chn);
+ }
+
+ writel_relaxed(val, regs + TSADCV2_INT_EN);
+}
+
+static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
+ .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv2_initialize,
+ .irq_ack = rk_tsadcv2_irq_ack,
+ .control = rk_tsadcv2_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+};
+
+static const struct of_device_id of_rockchip_thermal_match[] = {
+ {
+ .compatible = "rockchip,rk3288-tsadc",
+ .data = (void *)&rk3288_tsadc_data,
+ },
+ { /* end */ },
+};
+MODULE_DEVICE_TABLE(of, of_rockchip_thermal_match);
+
+static void
+rockchip_thermal_toggle_sensor(struct rockchip_thermal_sensor *sensor, bool on)
+{
+ struct thermal_zone_device *tzd = sensor->tzd;
+
+ tzd->ops->set_mode(tzd,
+ on ? THERMAL_DEVICE_ENABLED : THERMAL_DEVICE_DISABLED);
+}
+
+static irqreturn_t rockchip_thermal_alarm_irq_thread(int irq, void *dev)
+{
+ struct rockchip_thermal_data *thermal = dev;
+ int i;
+
+ dev_dbg(&thermal->pdev->dev, "thermal alarm\n");
+
+ thermal->chip->irq_ack(thermal->regs);
+
+ for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
+ thermal_zone_device_update(thermal->sensors[i].tzd);
+
+ return IRQ_HANDLED;
+}
+
+static int rockchip_thermal_get_temp(void *_sensor, long *out_temp)
+{
+ struct rockchip_thermal_sensor *sensor = _sensor;
+ struct rockchip_thermal_data *thermal = sensor->thermal;
+ const struct rockchip_tsadc_chip *tsadc = sensor->thermal->chip;
+ int retval;
+
+ retval = tsadc->get_temp(sensor->id, thermal->regs, out_temp);
+ dev_dbg(&thermal->pdev->dev, "sensor %d - temp: %ld, retval: %d\n",
+ sensor->id, *out_temp, retval);
+
+ return retval;
+}
+
+static const struct thermal_zone_of_device_ops rockchip_of_thermal_ops = {
+ .get_temp = rockchip_thermal_get_temp,
+};
+
+static int rockchip_configure_from_dt(struct device *dev,
+ struct device_node *np,
+ struct rockchip_thermal_data *thermal)
+{
+ u32 shut_temp, tshut_mode, tshut_polarity;
+
+ if (of_property_read_u32(np, "rockchip,hw-tshut-temp", &shut_temp)) {
+ dev_warn(dev,
+ "Missing tshut temp property, using default %ld\n",
+ thermal->chip->tshut_temp);
+ thermal->tshut_temp = thermal->chip->tshut_temp;
+ } else {
+ thermal->tshut_temp = shut_temp;
+ }
+
+ if (thermal->tshut_temp > INT_MAX) {
+ dev_err(dev, "Invalid tshut temperature specified: %ld\n",
+ thermal->tshut_temp);
+ return -ERANGE;
+ }
+
+ if (of_property_read_u32(np, "rockchip,hw-tshut-mode", &tshut_mode)) {
+ dev_warn(dev,
+ "Missing tshut mode property, using default (%s)\n",
+ thermal->chip->tshut_mode == TSHUT_MODE_GPIO ?
+ "gpio" : "cru");
+ thermal->tshut_mode = thermal->chip->tshut_mode;
+ } else {
+ thermal->tshut_mode = tshut_mode;
+ }
+
+ if (thermal->tshut_mode > 1) {
+ dev_err(dev, "Invalid tshut mode specified: %d\n",
+ thermal->tshut_mode);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(np, "rockchip,hw-tshut-polarity",
+ &tshut_polarity)) {
+ dev_warn(dev,
+ "Missing tshut-polarity property, using default (%s)\n",
+ thermal->chip->tshut_polarity == TSHUT_LOW_ACTIVE ?
+ "low" : "high");
+ thermal->tshut_polarity = thermal->chip->tshut_polarity;
+ } else {
+ thermal->tshut_polarity = tshut_polarity;
+ }
+
+ if (thermal->tshut_polarity > 1) {
+ dev_err(dev, "Invalid tshut-polarity specified: %d\n",
+ thermal->tshut_polarity);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+rockchip_thermal_register_sensor(struct platform_device *pdev,
+ struct rockchip_thermal_data *thermal,
+ struct rockchip_thermal_sensor *sensor,
+ enum sensor_id id)
+{
+ const struct rockchip_tsadc_chip *tsadc = thermal->chip;
+ int error;
+
+ tsadc->set_tshut_mode(id, thermal->regs, thermal->tshut_mode);
+ tsadc->set_tshut_temp(id, thermal->regs, thermal->tshut_temp);
+
+ sensor->thermal = thermal;
+ sensor->id = id;
+ sensor->tzd = thermal_zone_of_sensor_register(&pdev->dev, id, sensor,
+ &rockchip_of_thermal_ops);
+ if (IS_ERR(sensor->tzd)) {
+ error = PTR_ERR(sensor->tzd);
+ dev_err(&pdev->dev, "failed to register sensor %d: %d\n",
+ id, error);
+ return error;
+ }
+
+ return 0;
+}
+
+/*
+ * Reset TSADC Controller, reset all tsadc registers.
+ */
+static void rockchip_thermal_reset_controller(struct reset_control *reset)
+{
+ reset_control_assert(reset);
+ usleep_range(10, 20);
+ reset_control_deassert(reset);
+}
+
+static int rockchip_thermal_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct rockchip_thermal_data *thermal;
+ const struct of_device_id *match;
+ struct resource *res;
+ int irq;
+ int i;
+ int error;
+
+ match = of_match_node(of_rockchip_thermal_match, np);
+ if (!match)
+ return -ENXIO;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return -EINVAL;
+ }
+
+ thermal = devm_kzalloc(&pdev->dev, sizeof(struct rockchip_thermal_data),
+ GFP_KERNEL);
+ if (!thermal)
+ return -ENOMEM;
+
+ thermal->pdev = pdev;
+
+ thermal->chip = (const struct rockchip_tsadc_chip *)match->data;
+ if (!thermal->chip)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ thermal->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(thermal->regs))
+ return PTR_ERR(thermal->regs);
+
+ thermal->reset = devm_reset_control_get(&pdev->dev, "tsadc-apb");
+ if (IS_ERR(thermal->reset)) {
+ error = PTR_ERR(thermal->reset);
+ dev_err(&pdev->dev, "failed to get tsadc reset: %d\n", error);
+ return error;
+ }
+
+ thermal->clk = devm_clk_get(&pdev->dev, "tsadc");
+ if (IS_ERR(thermal->clk)) {
+ error = PTR_ERR(thermal->clk);
+ dev_err(&pdev->dev, "failed to get tsadc clock: %d\n", error);
+ return error;
+ }
+
+ thermal->pclk = devm_clk_get(&pdev->dev, "apb_pclk");
+ if (IS_ERR(thermal->pclk)) {
+ error = PTR_ERR(thermal->clk);
+ dev_err(&pdev->dev, "failed to get apb_pclk clock: %d\n",
+ error);
+ return error;
+ }
+
+ error = clk_prepare_enable(thermal->clk);
+ if (error) {
+ dev_err(&pdev->dev, "failed to enable converter clock: %d\n",
+ error);
+ return error;
+ }
+
+ error = clk_prepare_enable(thermal->pclk);
+ if (error) {
+ dev_err(&pdev->dev, "failed to enable pclk: %d\n", error);
+ goto err_disable_clk;
+ }
+
+ rockchip_thermal_reset_controller(thermal->reset);
+
+ error = rockchip_configure_from_dt(&pdev->dev, np, thermal);
+ if (error) {
+ dev_err(&pdev->dev, "failed to parse device tree data: %d\n",
+ error);
+ goto err_disable_pclk;
+ }
+
+ thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
+
+ error = rockchip_thermal_register_sensor(pdev, thermal,
+ &thermal->sensors[0],
+ SENSOR_CPU);
+ if (error) {
+ dev_err(&pdev->dev,
+ "failed to register CPU thermal sensor: %d\n", error);
+ goto err_disable_pclk;
+ }
+
+ error = rockchip_thermal_register_sensor(pdev, thermal,
+ &thermal->sensors[1],
+ SENSOR_GPU);
+ if (error) {
+ dev_err(&pdev->dev,
+ "failed to register GPU thermal sensor: %d\n", error);
+ goto err_unregister_cpu_sensor;
+ }
+
+ error = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ &rockchip_thermal_alarm_irq_thread,
+ IRQF_ONESHOT,
+ "rockchip_thermal", thermal);
+ if (error) {
+ dev_err(&pdev->dev,
+ "failed to request tsadc irq: %d\n", error);
+ goto err_unregister_gpu_sensor;
+ }
+
+ thermal->chip->control(thermal->regs, true);
+
+ for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
+ rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
+
+ platform_set_drvdata(pdev, thermal);
+
+ return 0;
+
+err_unregister_gpu_sensor:
+ thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[1].tzd);
+err_unregister_cpu_sensor:
+ thermal_zone_of_sensor_unregister(&pdev->dev, thermal->sensors[0].tzd);
+err_disable_pclk:
+ clk_disable_unprepare(thermal->pclk);
+err_disable_clk:
+ clk_disable_unprepare(thermal->clk);
+
+ return error;
+}
+
+static int rockchip_thermal_remove(struct platform_device *pdev)
+{
+ struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) {
+ struct rockchip_thermal_sensor *sensor = &thermal->sensors[i];
+
+ rockchip_thermal_toggle_sensor(sensor, false);
+ thermal_zone_of_sensor_unregister(&pdev->dev, sensor->tzd);
+ }
+
+ thermal->chip->control(thermal->regs, false);
+
+ clk_disable_unprepare(thermal->pclk);
+ clk_disable_unprepare(thermal->clk);
+
+ return 0;
+}
+
+static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
+ rockchip_thermal_toggle_sensor(&thermal->sensors[i], false);
+
+ thermal->chip->control(thermal->regs, false);
+
+ clk_disable(thermal->pclk);
+ clk_disable(thermal->clk);
+
+ return 0;
+}
+
+static int __maybe_unused rockchip_thermal_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
+ int i;
+ int error;
+
+ error = clk_enable(thermal->clk);
+ if (error)
+ return error;
+
+ error = clk_enable(thermal->pclk);
+ if (error)
+ return error;
+
+ rockchip_thermal_reset_controller(thermal->reset);
+
+ thermal->chip->initialize(thermal->regs, thermal->tshut_polarity);
+
+ for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++) {
+ enum sensor_id id = thermal->sensors[i].id;
+
+ thermal->chip->set_tshut_mode(id, thermal->regs,
+ thermal->tshut_mode);
+ thermal->chip->set_tshut_temp(id, thermal->regs,
+ thermal->tshut_temp);
+ }
+
+ thermal->chip->control(thermal->regs, true);
+
+ for (i = 0; i < ARRAY_SIZE(thermal->sensors); i++)
+ rockchip_thermal_toggle_sensor(&thermal->sensors[i], true);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rockchip_thermal_pm_ops,
+ rockchip_thermal_suspend, rockchip_thermal_resume);
+
+static struct platform_driver rockchip_thermal_driver = {
+ .driver = {
+ .name = "rockchip-thermal",
+ .owner = THIS_MODULE,
+ .pm = &rockchip_thermal_pm_ops,
+ .of_match_table = of_rockchip_thermal_match,
+ },
+ .probe = rockchip_thermal_probe,
+ .remove = rockchip_thermal_remove,
+};
+
+module_platform_driver(rockchip_thermal_driver);
+
+MODULE_DESCRIPTION("ROCKCHIP THERMAL Driver");
+MODULE_AUTHOR("Rockchip, Inc.");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:rockchip-thermal");
diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
index 158f5aa8dc5d..cd4471925cdd 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.h
+++ b/drivers/thermal/samsung/exynos_thermal_common.h
@@ -27,7 +27,6 @@
#define SENSOR_NAME_LEN 16
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
-#define MAX_TRIMINFO_CTRL_REG 2
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 1e7d0736e862..d44d91d681d4 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -33,7 +33,87 @@
#include "exynos_thermal_common.h"
#include "exynos_tmu.h"
-#include "exynos_tmu_data.h"
+
+/* Exynos generic registers */
+#define EXYNOS_TMU_REG_TRIMINFO 0x0
+#define EXYNOS_TMU_REG_CONTROL 0x20
+#define EXYNOS_TMU_REG_STATUS 0x28
+#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
+#define EXYNOS_TMU_REG_INTEN 0x70
+#define EXYNOS_TMU_REG_INTSTAT 0x74
+#define EXYNOS_TMU_REG_INTCLEAR 0x78
+
+#define EXYNOS_TMU_TEMP_MASK 0xff
+#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
+#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f
+#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf
+#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
+#define EXYNOS_TMU_CORE_EN_SHIFT 0
+
+/* Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON1 0x10
+
+/* Exynos4210 specific registers */
+#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
+#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
+
+/* Exynos5250, Exynos4412, Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON2 0x14
+#define EXYNOS_THD_TEMP_RISE 0x50
+#define EXYNOS_THD_TEMP_FALL 0x54
+#define EXYNOS_EMUL_CON 0x80
+
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
+#define EXYNOS_TRIMINFO_25_SHIFT 0
+#define EXYNOS_TRIMINFO_85_SHIFT 8
+#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
+#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
+#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
+
+#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
+#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
+#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
+#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
+#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
+
+#define EXYNOS_EMUL_TIME 0x57F0
+#define EXYNOS_EMUL_TIME_MASK 0xffff
+#define EXYNOS_EMUL_TIME_SHIFT 16
+#define EXYNOS_EMUL_DATA_SHIFT 8
+#define EXYNOS_EMUL_DATA_MASK 0xFF
+#define EXYNOS_EMUL_ENABLE 0x1
+
+/* Exynos5260 specific */
+#define EXYNOS5260_TMU_REG_INTEN 0xC0
+#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
+#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
+#define EXYNOS5260_EMUL_CON 0x100
+
+/* Exynos4412 specific */
+#define EXYNOS4412_MUX_ADDR_VALUE 6
+#define EXYNOS4412_MUX_ADDR_SHIFT 20
+
+/*exynos5440 specific registers*/
+#define EXYNOS5440_TMU_S0_7_TRIM 0x000
+#define EXYNOS5440_TMU_S0_7_CTRL 0x020
+#define EXYNOS5440_TMU_S0_7_DEBUG 0x040
+#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0
+#define EXYNOS5440_TMU_S0_7_TH0 0x110
+#define EXYNOS5440_TMU_S0_7_TH1 0x130
+#define EXYNOS5440_TMU_S0_7_TH2 0x150
+#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
+#define EXYNOS5440_TMU_S0_7_IRQ 0x230
+/* exynos5440 common registers */
+#define EXYNOS5440_TMU_IRQ_STATUS 0x000
+#define EXYNOS5440_TMU_PMIN 0x004
+
+#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
+#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
+#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
+#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
+#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
+#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
+#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
/**
* struct exynos_tmu_data : A structure to hold the private data of the TMU
@@ -52,6 +132,11 @@
* @temp_error2: fused value of the second point trim.
* @regulator: pointer to the TMU regulator structure.
* @reg_conf: pointer to structure to register with core thermal.
+ * @tmu_initialize: SoC specific TMU initialization method
+ * @tmu_control: SoC specific TMU control method
+ * @tmu_read: SoC specific TMU temperature read method
+ * @tmu_set_emulation: SoC specific TMU emulation setting method
+ * @tmu_clear_irqs: SoC specific TMU interrupts clearing method
*/
struct exynos_tmu_data {
int id;
@@ -66,6 +151,12 @@ struct exynos_tmu_data {
u8 temp_error1, temp_error2;
struct regulator *regulator;
struct thermal_sensor_conf *reg_conf;
+ int (*tmu_initialize)(struct platform_device *pdev);
+ void (*tmu_control)(struct platform_device *pdev, bool on);
+ int (*tmu_read)(struct exynos_tmu_data *data);
+ void (*tmu_set_emulation)(struct exynos_tmu_data *data,
+ unsigned long temp);
+ void (*tmu_clear_irqs)(struct exynos_tmu_data *data);
};
/*
@@ -122,83 +213,10 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code)
return temp;
}
-static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data)
-{
- const struct exynos_tmu_registers *reg = data->pdata->registers;
- unsigned int val_irq;
-
- val_irq = readl(data->base + reg->tmu_intstat);
- /*
- * Clear the interrupts. Please note that the documentation for
- * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
- * states that INTCLEAR register has a different placing of bits
- * responsible for FALL IRQs than INTSTAT register. Exynos5420
- * and Exynos5440 documentation is correct (Exynos4210 doesn't
- * support FALL IRQs at all).
- */
- writel(val_irq, data->base + reg->tmu_intclear);
-}
-
-static int exynos_tmu_initialize(struct platform_device *pdev)
+static void sanitize_temp_error(struct exynos_tmu_data *data, u32 trim_info)
{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con, ctrl;
- unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i;
-
- mutex_lock(&data->lock);
- clk_enable(data->clk);
- if (!IS_ERR(data->clk_sec))
- clk_enable(data->clk_sec);
- if (TMU_SUPPORTS(pdata, READY_STATUS)) {
- status = readb(data->base + reg->tmu_status);
- if (!status) {
- ret = -EBUSY;
- goto out;
- }
- }
-
- if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
- for (i = 0; i < reg->triminfo_ctrl_count; i++) {
- if (pdata->triminfo_reload[i]) {
- ctrl = readl(data->base +
- reg->triminfo_ctrl[i]);
- ctrl |= pdata->triminfo_reload[i];
- writel(ctrl, data->base +
- reg->triminfo_ctrl[i]);
- }
- }
- }
-
- /* Save trimming info in order to perform calibration */
- if (data->soc == SOC_ARCH_EXYNOS5440) {
- /*
- * For exynos5440 soc triminfo value is swapped between TMU0 and
- * TMU2, so the below logic is needed.
- */
- switch (data->id) {
- case 0:
- trim_info = readl(data->base +
- EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
- break;
- case 1:
- trim_info = readl(data->base + reg->triminfo_data);
- break;
- case 2:
- trim_info = readl(data->base -
- EXYNOS5440_EFUSE_SWAP_OFFSET + reg->triminfo_data);
- }
- } else {
- /* On exynos5420 the triminfo register is in the shared space */
- if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
- trim_info = readl(data->base_second +
- reg->triminfo_data);
- else
- trim_info = readl(data->base + reg->triminfo_data);
- }
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
@@ -212,69 +230,37 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
data->temp_error2 =
(pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
+}
- rising_threshold = readl(data->base + reg->threshold_th0);
+static u32 get_th_reg(struct exynos_tmu_data *data, u32 threshold, bool falling)
+{
+ struct exynos_tmu_platform_data *pdata = data->pdata;
+ int i;
- if (data->soc == SOC_ARCH_EXYNOS4210) {
- /* Write temperature code for threshold */
- threshold_code = temp_to_code(data, pdata->threshold);
- writeb(threshold_code,
- data->base + reg->threshold_temp);
- for (i = 0; i < pdata->non_hw_trigger_levels; i++)
- writeb(pdata->trigger_levels[i], data->base +
- reg->threshold_th0 + i * sizeof(reg->threshold_th0));
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
+ u8 temp = pdata->trigger_levels[i];
- exynos_tmu_clear_irqs(data);
- } else {
- /* Write temperature code for rising and falling threshold */
- for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
- threshold_code = temp_to_code(data,
- pdata->trigger_levels[i]);
- rising_threshold &= ~(0xff << 8 * i);
- rising_threshold |= threshold_code << 8 * i;
- if (pdata->threshold_falling) {
- threshold_code = temp_to_code(data,
- pdata->trigger_levels[i] -
- pdata->threshold_falling);
- falling_threshold |= threshold_code << 8 * i;
- }
- }
+ if (falling)
+ temp -= pdata->threshold_falling;
+ else
+ threshold &= ~(0xff << 8 * i);
- writel(rising_threshold,
- data->base + reg->threshold_th0);
- writel(falling_threshold,
- data->base + reg->threshold_th1);
-
- exynos_tmu_clear_irqs(data);
-
- /* if last threshold limit is also present */
- i = pdata->max_trigger_level - 1;
- if (pdata->trigger_levels[i] &&
- (pdata->trigger_type[i] == HW_TRIP)) {
- threshold_code = temp_to_code(data,
- pdata->trigger_levels[i]);
- if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
- /* 1-4 level to be assigned in th0 reg */
- rising_threshold &= ~(0xff << 8 * i);
- rising_threshold |= threshold_code << 8 * i;
- writel(rising_threshold,
- data->base + reg->threshold_th0);
- } else if (i == EXYNOS_MAX_TRIGGER_PER_REG) {
- /* 5th level to be assigned in th2 reg */
- rising_threshold =
- threshold_code << reg->threshold_th3_l0_shift;
- writel(rising_threshold,
- data->base + reg->threshold_th2);
- }
- con = readl(data->base + reg->tmu_ctrl);
- con |= (1 << reg->therm_trip_en_shift);
- writel(con, data->base + reg->tmu_ctrl);
- }
+ threshold |= temp_to_code(data, temp) << 8 * i;
}
- /*Clear the PMIN in the common TMU register*/
- if (reg->tmu_pmin && !data->id)
- writel(0, data->base_second + reg->tmu_pmin);
-out:
+
+ return threshold;
+}
+
+static int exynos_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ int ret;
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+ if (!IS_ERR(data->clk_sec))
+ clk_enable(data->clk_sec);
+ ret = data->tmu_initialize(pdev);
clk_disable(data->clk);
mutex_unlock(&data->lock);
if (!IS_ERR(data->clk_sec))
@@ -283,20 +269,13 @@ out:
return ret;
}
-static void exynos_tmu_control(struct platform_device *pdev, bool on)
+static u32 get_con_reg(struct exynos_tmu_data *data, u32 con)
{
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int con, interrupt_en;
- mutex_lock(&data->lock);
- clk_enable(data->clk);
-
- con = readl(data->base + reg->tmu_ctrl);
-
- if (pdata->test_mux)
- con |= (pdata->test_mux << reg->test_mux_addr_shift);
+ if (data->soc == SOC_ARCH_EXYNOS4412 ||
+ data->soc == SOC_ARCH_EXYNOS3250)
+ con |= (EXYNOS4412_MUX_ADDR_VALUE << EXYNOS4412_MUX_ADDR_SHIFT);
con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
@@ -305,95 +284,287 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
- con &= ~(reg->therm_trip_mode_mask <<
- reg->therm_trip_mode_shift);
- con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
+ con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
+ con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
}
- if (on) {
- con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en =
- pdata->trigger_enable[3] << reg->inten_rise3_shift |
- pdata->trigger_enable[2] << reg->inten_rise2_shift |
- pdata->trigger_enable[1] << reg->inten_rise1_shift |
- pdata->trigger_enable[0] << reg->inten_rise0_shift;
- if (TMU_SUPPORTS(pdata, FALLING_TRIP))
- interrupt_en |=
- interrupt_en << reg->inten_fall0_shift;
- } else {
- con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
- interrupt_en = 0; /* Disable all interrupts */
- }
- writel(interrupt_en, data->base + reg->tmu_inten);
- writel(con, data->base + reg->tmu_ctrl);
+ return con;
+}
+
+static void exynos_tmu_control(struct platform_device *pdev, bool on)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+ data->tmu_control(pdev, on);
clk_disable(data->clk);
mutex_unlock(&data->lock);
}
-static int exynos_tmu_read(struct exynos_tmu_data *data)
+static int exynos4210_tmu_initialize(struct platform_device *pdev)
{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- u8 temp_code;
- int temp;
+ unsigned int status;
+ int ret = 0, threshold_code, i;
- mutex_lock(&data->lock);
- clk_enable(data->clk);
+ status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ goto out;
+ }
- temp_code = readb(data->base + reg->tmu_cur_temp);
+ sanitize_temp_error(data, readl(data->base + EXYNOS_TMU_REG_TRIMINFO));
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp_code should range between 75 and 175 */
- if (temp_code < 75 || temp_code > 175) {
- temp = -ENODATA;
- goto out;
+ /* Write temperature code for threshold */
+ threshold_code = temp_to_code(data, pdata->threshold);
+ writeb(threshold_code, data->base + EXYNOS4210_TMU_REG_THRESHOLD_TEMP);
+
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++)
+ writeb(pdata->trigger_levels[i], data->base +
+ EXYNOS4210_TMU_REG_TRIG_LEVEL0 + i * 4);
+
+ data->tmu_clear_irqs(data);
+out:
+ return ret;
+}
+
+static int exynos4412_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos_tmu_platform_data *pdata = data->pdata;
+ unsigned int status, trim_info, con, ctrl, rising_threshold;
+ int ret = 0, threshold_code, i;
+
+ status = readb(data->base + EXYNOS_TMU_REG_STATUS);
+ if (!status) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ if (data->soc == SOC_ARCH_EXYNOS3250 ||
+ data->soc == SOC_ARCH_EXYNOS4412 ||
+ data->soc == SOC_ARCH_EXYNOS5250) {
+ if (data->soc == SOC_ARCH_EXYNOS3250) {
+ ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
+ ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
+ writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
}
+ ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
+ ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
+ writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
+ }
- temp = code_to_temp(data, temp_code);
+ /* On exynos5420 the triminfo register is in the shared space */
+ if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO)
+ trim_info = readl(data->base_second + EXYNOS_TMU_REG_TRIMINFO);
+ else
+ trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
+
+ sanitize_temp_error(data, trim_info);
+
+ /* Write temperature code for rising and falling threshold */
+ rising_threshold = readl(data->base + EXYNOS_THD_TEMP_RISE);
+ rising_threshold = get_th_reg(data, rising_threshold, false);
+ writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
+ writel(get_th_reg(data, 0, true), data->base + EXYNOS_THD_TEMP_FALL);
+
+ data->tmu_clear_irqs(data);
+
+ /* if last threshold limit is also present */
+ i = pdata->max_trigger_level - 1;
+ if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) {
+ threshold_code = temp_to_code(data, pdata->trigger_levels[i]);
+ /* 1-4 level to be assigned in th0 reg */
+ rising_threshold &= ~(0xff << 8 * i);
+ rising_threshold |= threshold_code << 8 * i;
+ writel(rising_threshold, data->base + EXYNOS_THD_TEMP_RISE);
+ con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
+ con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+ }
out:
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
+ return ret;
+}
- return temp;
+static int exynos5440_tmu_initialize(struct platform_device *pdev)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos_tmu_platform_data *pdata = data->pdata;
+ unsigned int trim_info = 0, con, rising_threshold;
+ int ret = 0, threshold_code, i;
+
+ /*
+ * For exynos5440 soc triminfo value is swapped between TMU0 and
+ * TMU2, so the below logic is needed.
+ */
+ switch (data->id) {
+ case 0:
+ trim_info = readl(data->base + EXYNOS5440_EFUSE_SWAP_OFFSET +
+ EXYNOS5440_TMU_S0_7_TRIM);
+ break;
+ case 1:
+ trim_info = readl(data->base + EXYNOS5440_TMU_S0_7_TRIM);
+ break;
+ case 2:
+ trim_info = readl(data->base - EXYNOS5440_EFUSE_SWAP_OFFSET +
+ EXYNOS5440_TMU_S0_7_TRIM);
+ }
+ sanitize_temp_error(data, trim_info);
+
+ /* Write temperature code for rising and falling threshold */
+ rising_threshold = readl(data->base + EXYNOS5440_TMU_S0_7_TH0);
+ rising_threshold = get_th_reg(data, rising_threshold, false);
+ writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH0);
+ writel(0, data->base + EXYNOS5440_TMU_S0_7_TH1);
+
+ data->tmu_clear_irqs(data);
+
+ /* if last threshold limit is also present */
+ i = pdata->max_trigger_level - 1;
+ if (pdata->trigger_levels[i] && pdata->trigger_type[i] == HW_TRIP) {
+ threshold_code = temp_to_code(data, pdata->trigger_levels[i]);
+ /* 5th level to be assigned in th2 reg */
+ rising_threshold =
+ threshold_code << EXYNOS5440_TMU_TH_RISE4_SHIFT;
+ writel(rising_threshold, data->base + EXYNOS5440_TMU_S0_7_TH2);
+ con = readl(data->base + EXYNOS5440_TMU_S0_7_CTRL);
+ con |= (1 << EXYNOS_TMU_THERM_TRIP_EN_SHIFT);
+ writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
+ }
+ /* Clear the PMIN in the common TMU register */
+ if (!data->id)
+ writel(0, data->base_second + EXYNOS5440_TMU_PMIN);
+ return ret;
}
-#ifdef CONFIG_THERMAL_EMULATION
-static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
+static void exynos4210_tmu_control(struct platform_device *pdev, bool on)
{
- struct exynos_tmu_data *data = drv_data;
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val;
- int ret = -EINVAL;
+ unsigned int con, interrupt_en;
- if (!TMU_SUPPORTS(pdata, EMULATION))
- goto out;
+ con = get_con_reg(data, readl(data->base + EXYNOS_TMU_REG_CONTROL));
- if (temp && temp < MCELSIUS)
- goto out;
+ if (on) {
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ interrupt_en =
+ pdata->trigger_enable[3] << EXYNOS_TMU_INTEN_RISE3_SHIFT |
+ pdata->trigger_enable[2] << EXYNOS_TMU_INTEN_RISE2_SHIFT |
+ pdata->trigger_enable[1] << EXYNOS_TMU_INTEN_RISE1_SHIFT |
+ pdata->trigger_enable[0] << EXYNOS_TMU_INTEN_RISE0_SHIFT;
+ if (data->soc != SOC_ARCH_EXYNOS4210)
+ interrupt_en |=
+ interrupt_en << EXYNOS_TMU_INTEN_FALL0_SHIFT;
+ } else {
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ interrupt_en = 0; /* Disable all interrupts */
+ }
+ writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
+ writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
+}
+
+static void exynos5440_tmu_control(struct platform_device *pdev, bool on)
+{
+ struct exynos_tmu_data *data = platform_get_drvdata(pdev);
+ struct exynos_tmu_platform_data *pdata = data->pdata;
+ unsigned int con, interrupt_en;
+
+ con = get_con_reg(data, readl(data->base + EXYNOS5440_TMU_S0_7_CTRL));
+
+ if (on) {
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ interrupt_en =
+ pdata->trigger_enable[3] << EXYNOS5440_TMU_INTEN_RISE3_SHIFT |
+ pdata->trigger_enable[2] << EXYNOS5440_TMU_INTEN_RISE2_SHIFT |
+ pdata->trigger_enable[1] << EXYNOS5440_TMU_INTEN_RISE1_SHIFT |
+ pdata->trigger_enable[0] << EXYNOS5440_TMU_INTEN_RISE0_SHIFT;
+ interrupt_en |= interrupt_en << EXYNOS5440_TMU_INTEN_FALL0_SHIFT;
+ } else {
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
+ interrupt_en = 0; /* Disable all interrupts */
+ }
+ writel(interrupt_en, data->base + EXYNOS5440_TMU_S0_7_IRQEN);
+ writel(con, data->base + EXYNOS5440_TMU_S0_7_CTRL);
+}
+
+static int exynos_tmu_read(struct exynos_tmu_data *data)
+{
+ int ret;
mutex_lock(&data->lock);
clk_enable(data->clk);
+ ret = data->tmu_read(data);
+ if (ret >= 0)
+ ret = code_to_temp(data, ret);
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
- val = readl(data->base + reg->emul_con);
+ return ret;
+}
+#ifdef CONFIG_THERMAL_EMULATION
+static u32 get_emul_con_reg(struct exynos_tmu_data *data, unsigned int val,
+ unsigned long temp)
+{
if (temp) {
temp /= MCELSIUS;
- if (TMU_SUPPORTS(pdata, EMUL_TIME)) {
- val &= ~(EXYNOS_EMUL_TIME_MASK << reg->emul_time_shift);
- val |= (EXYNOS_EMUL_TIME << reg->emul_time_shift);
+ if (data->soc != SOC_ARCH_EXYNOS5440) {
+ val &= ~(EXYNOS_EMUL_TIME_MASK << EXYNOS_EMUL_TIME_SHIFT);
+ val |= (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT);
}
- val &= ~(EXYNOS_EMUL_DATA_MASK << reg->emul_temp_shift);
- val |= (temp_to_code(data, temp) << reg->emul_temp_shift) |
+ val &= ~(EXYNOS_EMUL_DATA_MASK << EXYNOS_EMUL_DATA_SHIFT);
+ val |= (temp_to_code(data, temp) << EXYNOS_EMUL_DATA_SHIFT) |
EXYNOS_EMUL_ENABLE;
} else {
val &= ~EXYNOS_EMUL_ENABLE;
}
- writel(val, data->base + reg->emul_con);
+ return val;
+}
+
+static void exynos4412_tmu_set_emulation(struct exynos_tmu_data *data,
+ unsigned long temp)
+{
+ unsigned int val;
+ u32 emul_con;
+
+ if (data->soc == SOC_ARCH_EXYNOS5260)
+ emul_con = EXYNOS5260_EMUL_CON;
+ else
+ emul_con = EXYNOS_EMUL_CON;
+
+ val = readl(data->base + emul_con);
+ val = get_emul_con_reg(data, val, temp);
+ writel(val, data->base + emul_con);
+}
+
+static void exynos5440_tmu_set_emulation(struct exynos_tmu_data *data,
+ unsigned long temp)
+{
+ unsigned int val;
+
+ val = readl(data->base + EXYNOS5440_TMU_S0_7_DEBUG);
+ val = get_emul_con_reg(data, val, temp);
+ writel(val, data->base + EXYNOS5440_TMU_S0_7_DEBUG);
+}
+
+static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
+{
+ struct exynos_tmu_data *data = drv_data;
+ int ret = -EINVAL;
+
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ goto out;
+ if (temp && temp < MCELSIUS)
+ goto out;
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+ data->tmu_set_emulation(data, temp);
clk_disable(data->clk);
mutex_unlock(&data->lock);
return 0;
@@ -401,23 +572,41 @@ out:
return ret;
}
#else
+#define exynos4412_tmu_set_emulation NULL
+#define exynos5440_tmu_set_emulation NULL
static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
{ return -EINVAL; }
#endif/*CONFIG_THERMAL_EMULATION*/
+static int exynos4210_tmu_read(struct exynos_tmu_data *data)
+{
+ int ret = readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
+
+ /* "temp_code" should range between 75 and 175 */
+ return (ret < 75 || ret > 175) ? -ENODATA : ret;
+}
+
+static int exynos4412_tmu_read(struct exynos_tmu_data *data)
+{
+ return readb(data->base + EXYNOS_TMU_REG_CURRENT_TEMP);
+}
+
+static int exynos5440_tmu_read(struct exynos_tmu_data *data)
+{
+ return readb(data->base + EXYNOS5440_TMU_S0_7_TEMP);
+}
+
static void exynos_tmu_work(struct work_struct *work)
{
struct exynos_tmu_data *data = container_of(work,
struct exynos_tmu_data, irq_work);
- struct exynos_tmu_platform_data *pdata = data->pdata;
- const struct exynos_tmu_registers *reg = pdata->registers;
unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
/* Find which sensor generated this interrupt */
- if (reg->tmu_irqstatus) {
- val_type = readl(data->base_second + reg->tmu_irqstatus);
+ if (data->soc == SOC_ARCH_EXYNOS5440) {
+ val_type = readl(data->base_second + EXYNOS5440_TMU_IRQ_STATUS);
if (!((val_type >> data->id) & 0x1))
goto out;
}
@@ -429,7 +618,7 @@ static void exynos_tmu_work(struct work_struct *work)
clk_enable(data->clk);
/* TODO: take action based on particular interrupt */
- exynos_tmu_clear_irqs(data);
+ data->tmu_clear_irqs(data);
clk_disable(data->clk);
mutex_unlock(&data->lock);
@@ -437,6 +626,40 @@ out:
enable_irq(data->irq);
}
+static void exynos4210_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+ unsigned int val_irq;
+ u32 tmu_intstat, tmu_intclear;
+
+ if (data->soc == SOC_ARCH_EXYNOS5260) {
+ tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT;
+ tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR;
+ } else {
+ tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
+ tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
+ }
+
+ val_irq = readl(data->base + tmu_intstat);
+ /*
+ * Clear the interrupts. Please note that the documentation for
+ * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
+ * states that INTCLEAR register has a different placing of bits
+ * responsible for FALL IRQs than INTSTAT register. Exynos5420
+ * and Exynos5440 documentation is correct (Exynos4210 doesn't
+ * support FALL IRQs at all).
+ */
+ writel(val_irq, data->base + tmu_intclear);
+}
+
+static void exynos5440_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+ unsigned int val_irq;
+
+ val_irq = readl(data->base + EXYNOS5440_TMU_S0_7_IRQ);
+ /* clear the interrupts */
+ writel(val_irq, data->base + EXYNOS5440_TMU_S0_7_IRQ);
+}
+
static irqreturn_t exynos_tmu_irq(int irq, void *id)
{
struct exynos_tmu_data *data = id;
@@ -450,35 +673,35 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
static const struct of_device_id exynos_tmu_match[] = {
{
.compatible = "samsung,exynos3250-tmu",
- .data = (void *)EXYNOS3250_TMU_DRV_DATA,
+ .data = &exynos3250_default_tmu_data,
},
{
.compatible = "samsung,exynos4210-tmu",
- .data = (void *)EXYNOS4210_TMU_DRV_DATA,
+ .data = &exynos4210_default_tmu_data,
},
{
.compatible = "samsung,exynos4412-tmu",
- .data = (void *)EXYNOS4412_TMU_DRV_DATA,
+ .data = &exynos4412_default_tmu_data,
},
{
.compatible = "samsung,exynos5250-tmu",
- .data = (void *)EXYNOS5250_TMU_DRV_DATA,
+ .data = &exynos5250_default_tmu_data,
},
{
.compatible = "samsung,exynos5260-tmu",
- .data = (void *)EXYNOS5260_TMU_DRV_DATA,
+ .data = &exynos5260_default_tmu_data,
},
{
.compatible = "samsung,exynos5420-tmu",
- .data = (void *)EXYNOS5420_TMU_DRV_DATA,
+ .data = &exynos5420_default_tmu_data,
},
{
.compatible = "samsung,exynos5420-tmu-ext-triminfo",
- .data = (void *)EXYNOS5420_TMU_DRV_DATA,
+ .data = &exynos5420_default_tmu_data,
},
{
.compatible = "samsung,exynos5440-tmu",
- .data = (void *)EXYNOS5440_TMU_DRV_DATA,
+ .data = &exynos5440_default_tmu_data,
},
{},
};
@@ -553,12 +776,47 @@ static int exynos_map_dt_data(struct platform_device *pdev)
dev_err(&pdev->dev, "No platform init data supplied.\n");
return -ENODEV;
}
+
data->pdata = pdata;
+ data->soc = pdata->type;
+
+ switch (data->soc) {
+ case SOC_ARCH_EXYNOS4210:
+ data->tmu_initialize = exynos4210_tmu_initialize;
+ data->tmu_control = exynos4210_tmu_control;
+ data->tmu_read = exynos4210_tmu_read;
+ data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+ break;
+ case SOC_ARCH_EXYNOS3250:
+ case SOC_ARCH_EXYNOS4412:
+ case SOC_ARCH_EXYNOS5250:
+ case SOC_ARCH_EXYNOS5260:
+ case SOC_ARCH_EXYNOS5420:
+ case SOC_ARCH_EXYNOS5420_TRIMINFO:
+ data->tmu_initialize = exynos4412_tmu_initialize;
+ data->tmu_control = exynos4210_tmu_control;
+ data->tmu_read = exynos4412_tmu_read;
+ data->tmu_set_emulation = exynos4412_tmu_set_emulation;
+ data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
+ break;
+ case SOC_ARCH_EXYNOS5440:
+ data->tmu_initialize = exynos5440_tmu_initialize;
+ data->tmu_control = exynos5440_tmu_control;
+ data->tmu_read = exynos5440_tmu_read;
+ data->tmu_set_emulation = exynos5440_tmu_set_emulation;
+ data->tmu_clear_irqs = exynos5440_tmu_clear_irqs;
+ break;
+ default:
+ dev_err(&pdev->dev, "Platform not supported\n");
+ return -EINVAL;
+ }
+
/*
* Check if the TMU shares some registers and then try to map the
* memory of common registers.
*/
- if (!TMU_SUPPORTS(pdata, ADDRESS_MULTIPLE))
+ if (data->soc != SOC_ARCH_EXYNOS5420_TRIMINFO &&
+ data->soc != SOC_ARCH_EXYNOS5440)
return 0;
if (of_address_to_resource(pdev->dev.of_node, 1, &res)) {
@@ -625,20 +883,6 @@ static int exynos_tmu_probe(struct platform_device *pdev)
goto err_clk_sec;
}
- if (pdata->type == SOC_ARCH_EXYNOS3250 ||
- pdata->type == SOC_ARCH_EXYNOS4210 ||
- pdata->type == SOC_ARCH_EXYNOS4412 ||
- pdata->type == SOC_ARCH_EXYNOS5250 ||
- pdata->type == SOC_ARCH_EXYNOS5260 ||
- pdata->type == SOC_ARCH_EXYNOS5420_TRIMINFO ||
- pdata->type == SOC_ARCH_EXYNOS5440)
- data->soc = pdata->type;
- else {
- ret = -EINVAL;
- dev_err(&pdev->dev, "Platform not supported\n");
- goto err_clk;
- }
-
ret = exynos_tmu_initialize(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize TMU\n");
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index c58c7663a3fe..da3009bff6c4 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -40,115 +40,12 @@ enum soc_type {
SOC_ARCH_EXYNOS4412,
SOC_ARCH_EXYNOS5250,
SOC_ARCH_EXYNOS5260,
+ SOC_ARCH_EXYNOS5420,
SOC_ARCH_EXYNOS5420_TRIMINFO,
SOC_ARCH_EXYNOS5440,
};
/**
- * EXYNOS TMU supported features.
- * TMU_SUPPORT_EMULATION - This features is used to set user defined
- * temperature to the TMU controller.
- * TMU_SUPPORT_MULTI_INST - This features denotes that the soc
- * has many instances of TMU.
- * TMU_SUPPORT_TRIM_RELOAD - This features shows that trimming can
- * be reloaded.
- * TMU_SUPPORT_FALLING_TRIP - This features shows that interrupt can
- * be registered for falling trips also.
- * TMU_SUPPORT_READY_STATUS - This feature tells that the TMU current
- * state(active/idle) can be checked.
- * TMU_SUPPORT_EMUL_TIME - This features allows to set next temp emulation
- * sample time.
- * TMU_SUPPORT_ADDRESS_MULTIPLE - This feature tells that the different TMU
- * sensors shares some common registers.
- * TMU_SUPPORT - macro to compare the above features with the supplied.
- */
-#define TMU_SUPPORT_EMULATION BIT(0)
-#define TMU_SUPPORT_MULTI_INST BIT(1)
-#define TMU_SUPPORT_TRIM_RELOAD BIT(2)
-#define TMU_SUPPORT_FALLING_TRIP BIT(3)
-#define TMU_SUPPORT_READY_STATUS BIT(4)
-#define TMU_SUPPORT_EMUL_TIME BIT(5)
-#define TMU_SUPPORT_ADDRESS_MULTIPLE BIT(6)
-
-#define TMU_SUPPORTS(a, b) (a->features & TMU_SUPPORT_ ## b)
-
-/**
- * struct exynos_tmu_register - register descriptors to access registers and
- * bitfields. The register validity, offsets and bitfield values may vary
- * slightly across different exynos SOC's.
- * @triminfo_data: register containing 2 pont trimming data
- * @triminfo_ctrl: trim info controller register.
- * @triminfo_ctrl_count: the number of trim info controller register.
- * @tmu_ctrl: TMU main controller register.
- * @test_mux_addr_shift: shift bits of test mux address.
- * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
- * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
- * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
- * @tmu_status: register drescribing the TMU status.
- * @tmu_cur_temp: register containing the current temperature of the TMU.
- * @threshold_temp: register containing the base threshold level.
- * @threshold_th0: Register containing first set of rising levels.
- * @threshold_th1: Register containing second set of rising levels.
- * @threshold_th2: Register containing third set of rising levels.
- * @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
- * @tmu_inten: register containing the different threshold interrupt
- enable bits.
- * @inten_rise0_shift: shift bits of rising 0 interrupt bits.
- * @inten_rise1_shift: shift bits of rising 1 interrupt bits.
- * @inten_rise2_shift: shift bits of rising 2 interrupt bits.
- * @inten_rise3_shift: shift bits of rising 3 interrupt bits.
- * @inten_fall0_shift: shift bits of falling 0 interrupt bits.
- * @tmu_intstat: Register containing the interrupt status values.
- * @tmu_intclear: Register for clearing the raised interrupt status.
- * @emul_con: TMU emulation controller register.
- * @emul_temp_shift: shift bits of emulation temperature.
- * @emul_time_shift: shift bits of emulation time.
- * @tmu_irqstatus: register to find which TMU generated interrupts.
- * @tmu_pmin: register to get/set the Pmin value.
- */
-struct exynos_tmu_registers {
- u32 triminfo_data;
-
- u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
- u32 triminfo_ctrl_count;
-
- u32 tmu_ctrl;
- u32 test_mux_addr_shift;
- u32 therm_trip_mode_shift;
- u32 therm_trip_mode_mask;
- u32 therm_trip_en_shift;
-
- u32 tmu_status;
-
- u32 tmu_cur_temp;
-
- u32 threshold_temp;
-
- u32 threshold_th0;
- u32 threshold_th1;
- u32 threshold_th2;
- u32 threshold_th3_l0_shift;
-
- u32 tmu_inten;
- u32 inten_rise0_shift;
- u32 inten_rise1_shift;
- u32 inten_rise2_shift;
- u32 inten_rise3_shift;
- u32 inten_fall0_shift;
-
- u32 tmu_intstat;
-
- u32 tmu_intclear;
-
- u32 emul_con;
- u32 emul_temp_shift;
- u32 emul_time_shift;
-
- u32 tmu_irqstatus;
- u32 tmu_pmin;
-};
-
-/**
* struct exynos_tmu_platform_data
* @threshold: basic temperature for generating interrupt
* 25 <= threshold <= 125 [unit: degree Celsius]
@@ -192,16 +89,10 @@ struct exynos_tmu_registers {
* @first_point_trim: temp value of the first point trimming
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
- * @test_mux; information if SoC supports test MUX
- * @triminfo_reload: reload value to read TRIMINFO register
* @cal_type: calibration type for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
* @freq_tab_count: Count of the above table as frequency reduction may
* applicable to only some of the trigger levels.
- * @registers: Pointer to structure containing all the TMU controller registers
- * and bitfields shifts and masks.
- * @features: a bitfield value indicating the features supported in SOC like
- * emulation, multi instance etc
*
* This structure is required for configuration of exynos_tmu driver.
*/
@@ -223,15 +114,11 @@ struct exynos_tmu_platform_data {
u8 first_point_trim;
u8 second_point_trim;
u8 default_temp_offset;
- u8 test_mux;
- u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
enum calibration_type cal_type;
enum soc_type type;
struct freq_clip_table freq_tab[4];
unsigned int freq_tab_count;
- const struct exynos_tmu_registers *registers;
- unsigned int features;
};
/**
@@ -246,4 +133,12 @@ struct exynos_tmu_init_data {
struct exynos_tmu_platform_data tmu_data[];
};
+extern struct exynos_tmu_init_data const exynos3250_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos4412_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos5260_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos5420_default_tmu_data;
+extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
+
#endif /* _EXYNOS_TMU_H */
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 1724f6cdaef8..b23910069f68 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -22,24 +22,6 @@
#include "exynos_thermal_common.h"
#include "exynos_tmu.h"
-#include "exynos_tmu_data.h"
-
-#if defined(CONFIG_CPU_EXYNOS4210)
-static const struct exynos_tmu_registers exynos4210_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .tmu_status = EXYNOS_TMU_REG_STATUS,
- .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
- .threshold_th0 = EXYNOS4210_TMU_REG_TRIG_LEVEL0,
- .tmu_inten = EXYNOS_TMU_REG_INTEN,
- .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
- .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
- .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
- .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
- .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
- .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
-};
struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
.tmu_data = {
@@ -75,40 +57,10 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
},
.freq_tab_count = 2,
.type = SOC_ARCH_EXYNOS4210,
- .registers = &exynos4210_tmu_registers,
- .features = TMU_SUPPORT_READY_STATUS,
},
},
.tmu_count = 1,
};
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS3250)
-static const struct exynos_tmu_registers exynos3250_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
- .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
- .triminfo_ctrl_count = 2,
- .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
- .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
- .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .tmu_status = EXYNOS_TMU_REG_STATUS,
- .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS_THD_TEMP_RISE,
- .threshold_th1 = EXYNOS_THD_TEMP_FALL,
- .tmu_inten = EXYNOS_TMU_REG_INTEN,
- .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
- .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
- .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
- .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
- .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
- .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .emul_con = EXYNOS_EMUL_CON,
- .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
- .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
-};
#define EXYNOS3250_TMU_DATA \
.threshold_falling = 10, \
@@ -144,54 +96,17 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.freq_clip_max = 400 * 1000, \
.temp_level = 95, \
}, \
- .freq_tab_count = 2, \
- .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
- .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
- .registers = &exynos3250_tmu_registers, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
-#endif
+ .freq_tab_count = 2
-#if defined(CONFIG_SOC_EXYNOS3250)
struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
.tmu_data = {
{
EXYNOS3250_TMU_DATA,
.type = SOC_ARCH_EXYNOS3250,
- .test_mux = EXYNOS4412_MUX_ADDR_VALUE,
},
},
.tmu_count = 1,
};
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
-static const struct exynos_tmu_registers exynos4412_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
- .triminfo_ctrl_count = 1,
- .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
- .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
- .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .tmu_status = EXYNOS_TMU_REG_STATUS,
- .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS_THD_TEMP_RISE,
- .threshold_th1 = EXYNOS_THD_TEMP_FALL,
- .tmu_inten = EXYNOS_TMU_REG_INTEN,
- .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
- .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
- .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
- .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
- .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
- .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
- .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .emul_con = EXYNOS_EMUL_CON,
- .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
- .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
-};
#define EXYNOS4412_TMU_DATA \
.threshold_falling = 10, \
@@ -227,28 +142,18 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.freq_clip_max = 400 * 1000, \
.temp_level = 95, \
}, \
- .freq_tab_count = 2, \
- .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
- .registers = &exynos4412_tmu_registers, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
-#endif
+ .freq_tab_count = 2
-#if defined(CONFIG_SOC_EXYNOS4412)
struct exynos_tmu_init_data const exynos4412_default_tmu_data = {
.tmu_data = {
{
EXYNOS4412_TMU_DATA,
.type = SOC_ARCH_EXYNOS4412,
- .test_mux = EXYNOS4412_MUX_ADDR_VALUE,
},
},
.tmu_count = 1,
};
-#endif
-#if defined(CONFIG_SOC_EXYNOS5250)
struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
.tmu_data = {
{
@@ -258,31 +163,6 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
},
.tmu_count = 1,
};
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5260)
-static const struct exynos_tmu_registers exynos5260_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
- .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
- .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .tmu_status = EXYNOS_TMU_REG_STATUS,
- .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS_THD_TEMP_RISE,
- .threshold_th1 = EXYNOS_THD_TEMP_FALL,
- .tmu_inten = EXYNOS5260_TMU_REG_INTEN,
- .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
- .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
- .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
- .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
- .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
- .tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
- .tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
- .emul_con = EXYNOS5260_EMUL_CON,
- .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
- .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
-};
#define __EXYNOS5260_TMU_DATA \
.threshold_falling = 10, \
@@ -319,13 +199,10 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.temp_level = 103, \
}, \
.freq_tab_count = 2, \
- .registers = &exynos5260_tmu_registers, \
#define EXYNOS5260_TMU_DATA \
__EXYNOS5260_TMU_DATA \
- .type = SOC_ARCH_EXYNOS5260, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
- TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
+ .type = SOC_ARCH_EXYNOS5260
struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
.tmu_data = {
@@ -337,82 +214,14 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
},
.tmu_count = 5,
};
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5420)
-static const struct exynos_tmu_registers exynos5420_tmu_registers = {
- .triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
- .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
- .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .tmu_status = EXYNOS_TMU_REG_STATUS,
- .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
- .threshold_th0 = EXYNOS_THD_TEMP_RISE,
- .threshold_th1 = EXYNOS_THD_TEMP_FALL,
- .tmu_inten = EXYNOS_TMU_REG_INTEN,
- .inten_rise0_shift = EXYNOS_TMU_INTEN_RISE0_SHIFT,
- .inten_rise1_shift = EXYNOS_TMU_INTEN_RISE1_SHIFT,
- .inten_rise2_shift = EXYNOS_TMU_INTEN_RISE2_SHIFT,
- /* INTEN_RISE3 Not availble in exynos5420 */
- .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
- .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
- .tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
- .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .emul_con = EXYNOS_EMUL_CON,
- .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
- .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
-};
-
-#define __EXYNOS5420_TMU_DATA \
- .threshold_falling = 10, \
- .trigger_levels[0] = 85, \
- .trigger_levels[1] = 103, \
- .trigger_levels[2] = 110, \
- .trigger_levels[3] = 120, \
- .trigger_enable[0] = true, \
- .trigger_enable[1] = true, \
- .trigger_enable[2] = true, \
- .trigger_enable[3] = false, \
- .trigger_type[0] = THROTTLE_ACTIVE, \
- .trigger_type[1] = THROTTLE_ACTIVE, \
- .trigger_type[2] = SW_TRIP, \
- .trigger_type[3] = HW_TRIP, \
- .max_trigger_level = 4, \
- .non_hw_trigger_levels = 3, \
- .gain = 8, \
- .reference_voltage = 16, \
- .noise_cancel_mode = 4, \
- .cal_type = TYPE_ONE_POINT_TRIMMING, \
- .efuse_value = 55, \
- .min_efuse_value = 40, \
- .max_efuse_value = 100, \
- .first_point_trim = 25, \
- .second_point_trim = 85, \
- .default_temp_offset = 50, \
- .freq_tab[0] = { \
- .freq_clip_max = 800 * 1000, \
- .temp_level = 85, \
- }, \
- .freq_tab[1] = { \
- .freq_clip_max = 200 * 1000, \
- .temp_level = 103, \
- }, \
- .freq_tab_count = 2, \
- .registers = &exynos5420_tmu_registers, \
#define EXYNOS5420_TMU_DATA \
- __EXYNOS5420_TMU_DATA \
- .type = SOC_ARCH_EXYNOS5250, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
- TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
+ __EXYNOS5260_TMU_DATA \
+ .type = SOC_ARCH_EXYNOS5420
#define EXYNOS5420_TMU_DATA_SHARED \
- __EXYNOS5420_TMU_DATA \
- .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
- TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \
- TMU_SUPPORT_ADDRESS_MULTIPLE)
+ __EXYNOS5260_TMU_DATA \
+ .type = SOC_ARCH_EXYNOS5420_TRIMINFO
struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
.tmu_data = {
@@ -424,34 +233,6 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
},
.tmu_count = 5,
};
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5440)
-static const struct exynos_tmu_registers exynos5440_tmu_registers = {
- .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
- .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
- .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
- .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
- .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
- .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
- .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
- .threshold_th1 = EXYNOS5440_TMU_S0_7_TH1,
- .threshold_th2 = EXYNOS5440_TMU_S0_7_TH2,
- .threshold_th3_l0_shift = EXYNOS5440_TMU_TH_RISE4_SHIFT,
- .tmu_inten = EXYNOS5440_TMU_S0_7_IRQEN,
- .inten_rise0_shift = EXYNOS5440_TMU_INTEN_RISE0_SHIFT,
- .inten_rise1_shift = EXYNOS5440_TMU_INTEN_RISE1_SHIFT,
- .inten_rise2_shift = EXYNOS5440_TMU_INTEN_RISE2_SHIFT,
- .inten_rise3_shift = EXYNOS5440_TMU_INTEN_RISE3_SHIFT,
- .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
- .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
- .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
- .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
- .emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
- .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
- .tmu_pmin = EXYNOS5440_TMU_PMIN,
-};
#define EXYNOS5440_TMU_DATA \
.trigger_levels[0] = 100, \
@@ -471,10 +252,7 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.first_point_trim = 25, \
.second_point_trim = 70, \
.default_temp_offset = 25, \
- .type = SOC_ARCH_EXYNOS5440, \
- .registers = &exynos5440_tmu_registers, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
- TMU_SUPPORT_MULTI_INST | TMU_SUPPORT_ADDRESS_MULTIPLE),
+ .type = SOC_ARCH_EXYNOS5440
struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
.tmu_data = {
@@ -484,4 +262,3 @@ struct exynos_tmu_init_data const exynos5440_default_tmu_data = {
},
.tmu_count = 3,
};
-#endif
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
deleted file mode 100644
index 63de598c9c2c..000000000000
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * exynos_tmu_data.h - Samsung EXYNOS tmu data header file
- *
- * Copyright (C) 2013 Samsung Electronics
- * Amit Daniel Kachhap <amit.daniel@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef _EXYNOS_TMU_DATA_H
-#define _EXYNOS_TMU_DATA_H
-
-/* Exynos generic registers */
-#define EXYNOS_TMU_REG_TRIMINFO 0x0
-#define EXYNOS_TMU_REG_CONTROL 0x20
-#define EXYNOS_TMU_REG_STATUS 0x28
-#define EXYNOS_TMU_REG_CURRENT_TEMP 0x40
-#define EXYNOS_TMU_REG_INTEN 0x70
-#define EXYNOS_TMU_REG_INTSTAT 0x74
-#define EXYNOS_TMU_REG_INTCLEAR 0x78
-
-#define EXYNOS_TMU_TEMP_MASK 0xff
-#define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
-#define EXYNOS_TMU_REF_VOLTAGE_MASK 0x1f
-#define EXYNOS_TMU_BUF_SLOPE_SEL_MASK 0xf
-#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
-#define EXYNOS_TMU_CORE_EN_SHIFT 0
-
-/* Exynos3250 specific registers */
-#define EXYNOS_TMU_TRIMINFO_CON1 0x10
-
-/* Exynos4210 specific registers */
-#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
-
-/* Exynos5250, Exynos4412, Exynos3250 specific registers */
-#define EXYNOS_TMU_TRIMINFO_CON2 0x14
-#define EXYNOS_THD_TEMP_RISE 0x50
-#define EXYNOS_THD_TEMP_FALL 0x54
-#define EXYNOS_EMUL_CON 0x80
-
-#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
-#define EXYNOS_TRIMINFO_25_SHIFT 0
-#define EXYNOS_TRIMINFO_85_SHIFT 8
-#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
-#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
-#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
-
-#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
-#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
-#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
-#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
-#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
-
-#define EXYNOS_EMUL_TIME 0x57F0
-#define EXYNOS_EMUL_TIME_MASK 0xffff
-#define EXYNOS_EMUL_TIME_SHIFT 16
-#define EXYNOS_EMUL_DATA_SHIFT 8
-#define EXYNOS_EMUL_DATA_MASK 0xFF
-#define EXYNOS_EMUL_ENABLE 0x1
-
-#define EXYNOS_MAX_TRIGGER_PER_REG 4
-
-/* Exynos5260 specific */
-#define EXYNOS5260_TMU_REG_INTEN 0xC0
-#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
-#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
-#define EXYNOS5260_EMUL_CON 0x100
-
-/* Exynos4412 specific */
-#define EXYNOS4412_MUX_ADDR_VALUE 6
-#define EXYNOS4412_MUX_ADDR_SHIFT 20
-
-/*exynos5440 specific registers*/
-#define EXYNOS5440_TMU_S0_7_TRIM 0x000
-#define EXYNOS5440_TMU_S0_7_CTRL 0x020
-#define EXYNOS5440_TMU_S0_7_DEBUG 0x040
-#define EXYNOS5440_TMU_S0_7_STATUS 0x060
-#define EXYNOS5440_TMU_S0_7_TEMP 0x0f0
-#define EXYNOS5440_TMU_S0_7_TH0 0x110
-#define EXYNOS5440_TMU_S0_7_TH1 0x130
-#define EXYNOS5440_TMU_S0_7_TH2 0x150
-#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
-#define EXYNOS5440_TMU_S0_7_IRQ 0x230
-/* exynos5440 common registers */
-#define EXYNOS5440_TMU_IRQ_STATUS 0x000
-#define EXYNOS5440_TMU_PMIN 0x004
-
-#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
-#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
-#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
-#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
-#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
-#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
-#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
-
-#if defined(CONFIG_SOC_EXYNOS3250)
-extern struct exynos_tmu_init_data const exynos3250_default_tmu_data;
-#define EXYNOS3250_TMU_DRV_DATA (&exynos3250_default_tmu_data)
-#else
-#define EXYNOS3250_TMU_DRV_DATA (NULL)
-#endif
-
-#if defined(CONFIG_CPU_EXYNOS4210)
-extern struct exynos_tmu_init_data const exynos4210_default_tmu_data;
-#define EXYNOS4210_TMU_DRV_DATA (&exynos4210_default_tmu_data)
-#else
-#define EXYNOS4210_TMU_DRV_DATA (NULL)
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS4412)
-extern struct exynos_tmu_init_data const exynos4412_default_tmu_data;
-#define EXYNOS4412_TMU_DRV_DATA (&exynos4412_default_tmu_data)
-#else
-#define EXYNOS4412_TMU_DRV_DATA (NULL)
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5250)
-extern struct exynos_tmu_init_data const exynos5250_default_tmu_data;
-#define EXYNOS5250_TMU_DRV_DATA (&exynos5250_default_tmu_data)
-#else
-#define EXYNOS5250_TMU_DRV_DATA (NULL)
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5260)
-extern struct exynos_tmu_init_data const exynos5260_default_tmu_data;
-#define EXYNOS5260_TMU_DRV_DATA (&exynos5260_default_tmu_data)
-#else
-#define EXYNOS5260_TMU_DRV_DATA (NULL)
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5420)
-extern struct exynos_tmu_init_data const exynos5420_default_tmu_data;
-#define EXYNOS5420_TMU_DRV_DATA (&exynos5420_default_tmu_data)
-#else
-#define EXYNOS5420_TMU_DRV_DATA (NULL)
-#endif
-
-#if defined(CONFIG_SOC_EXYNOS5440)
-extern struct exynos_tmu_init_data const exynos5440_default_tmu_data;
-#define EXYNOS5440_TMU_DRV_DATA (&exynos5440_default_tmu_data)
-#else
-#define EXYNOS5440_TMU_DRV_DATA (NULL)
-#endif
-
-#endif /*_EXYNOS_TMU_DATA_H*/
diff --git a/drivers/thermal/tegra_soctherm.c b/drivers/thermal/tegra_soctherm.c
new file mode 100644
index 000000000000..9197fc05c5cc
--- /dev/null
+++ b/drivers/thermal/tegra_soctherm.c
@@ -0,0 +1,476 @@
+/*
+ * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author:
+ * Mikko Perttunen <mperttunen@nvidia.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+
+#include <soc/tegra/fuse.h>
+
+#define SENSOR_CONFIG0 0
+#define SENSOR_CONFIG0_STOP BIT(0)
+#define SENSOR_CONFIG0_TALL_SHIFT 8
+#define SENSOR_CONFIG0_TCALC_OVER BIT(4)
+#define SENSOR_CONFIG0_OVER BIT(3)
+#define SENSOR_CONFIG0_CPTR_OVER BIT(2)
+
+#define SENSOR_CONFIG1 4
+#define SENSOR_CONFIG1_TSAMPLE_SHIFT 0
+#define SENSOR_CONFIG1_TIDDQ_EN_SHIFT 15
+#define SENSOR_CONFIG1_TEN_COUNT_SHIFT 24
+#define SENSOR_CONFIG1_TEMP_ENABLE BIT(31)
+
+#define SENSOR_CONFIG2 8
+#define SENSOR_CONFIG2_THERMA_SHIFT 16
+#define SENSOR_CONFIG2_THERMB_SHIFT 0
+
+#define SENSOR_PDIV 0x1c0
+#define SENSOR_PDIV_T124 0x8888
+#define SENSOR_HOTSPOT_OFF 0x1c4
+#define SENSOR_HOTSPOT_OFF_T124 0x00060600
+#define SENSOR_TEMP1 0x1c8
+#define SENSOR_TEMP2 0x1cc
+
+#define SENSOR_TEMP_MASK 0xffff
+#define READBACK_VALUE_MASK 0xff00
+#define READBACK_VALUE_SHIFT 8
+#define READBACK_ADD_HALF BIT(7)
+#define READBACK_NEGATE BIT(1)
+
+#define FUSE_TSENSOR8_CALIB 0x180
+#define FUSE_SPARE_REALIGNMENT_REG_0 0x1fc
+
+#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK 0x1fff
+#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK (0x1fff << 13)
+#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT 13
+
+#define FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK 0x3ff
+#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK (0x7ff << 10)
+#define FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT 10
+
+#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_CP_MASK 0x3f
+#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK (0x1f << 21)
+#define FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT 21
+
+#define NOMINAL_CALIB_FT_T124 105
+#define NOMINAL_CALIB_CP_T124 25
+
+struct tegra_tsensor_configuration {
+ u32 tall, tsample, tiddq_en, ten_count, pdiv, tsample_ate, pdiv_ate;
+};
+
+struct tegra_tsensor {
+ const struct tegra_tsensor_configuration *config;
+ u32 base, calib_fuse_offset;
+ /* Correction values used to modify values read from calibration fuses */
+ s32 fuse_corr_alpha, fuse_corr_beta;
+};
+
+struct tegra_thermctl_zone {
+ void __iomem *reg;
+ unsigned int shift;
+};
+
+static const struct tegra_tsensor_configuration t124_tsensor_config = {
+ .tall = 16300,
+ .tsample = 120,
+ .tiddq_en = 1,
+ .ten_count = 1,
+ .pdiv = 8,
+ .tsample_ate = 480,
+ .pdiv_ate = 8
+};
+
+static const struct tegra_tsensor t124_tsensors[] = {
+ {
+ .config = &t124_tsensor_config,
+ .base = 0xc0,
+ .calib_fuse_offset = 0x098,
+ .fuse_corr_alpha = 1135400,
+ .fuse_corr_beta = -6266900,
+ },
+ {
+ .config = &t124_tsensor_config,
+ .base = 0xe0,
+ .calib_fuse_offset = 0x084,
+ .fuse_corr_alpha = 1122220,
+ .fuse_corr_beta = -5700700,
+ },
+ {
+ .config = &t124_tsensor_config,
+ .base = 0x100,
+ .calib_fuse_offset = 0x088,
+ .fuse_corr_alpha = 1127000,
+ .fuse_corr_beta = -6768200,
+ },
+ {
+ .config = &t124_tsensor_config,
+ .base = 0x120,
+ .calib_fuse_offset = 0x12c,
+ .fuse_corr_alpha = 1110900,
+ .fuse_corr_beta = -6232000,
+ },
+ {
+ .config = &t124_tsensor_config,
+ .base = 0x140,
+ .calib_fuse_offset = 0x158,
+ .fuse_corr_alpha = 1122300,
+ .fuse_corr_beta = -5936400,
+ },
+ {
+ .config = &t124_tsensor_config,
+ .base = 0x160,
+ .calib_fuse_offset = 0x15c,
+ .fuse_corr_alpha = 1145700,
+ .fuse_corr_beta = -7124600,
+ },
+ {
+ .config = &t124_tsensor_config,
+ .base = 0x180,
+ .calib_fuse_offset = 0x154,
+ .fuse_corr_alpha = 1120100,
+ .fuse_corr_beta = -6000500,
+ },
+ {
+ .config = &t124_tsensor_config,
+ .base = 0x1a0,
+ .calib_fuse_offset = 0x160,
+ .fuse_corr_alpha = 1106500,
+ .fuse_corr_beta = -6729300,
+ },
+};
+
+struct tegra_soctherm {
+ struct reset_control *reset;
+ struct clk *clock_tsensor;
+ struct clk *clock_soctherm;
+ void __iomem *regs;
+
+ struct thermal_zone_device *thermctl_tzs[4];
+};
+
+struct tsensor_shared_calibration {
+ u32 base_cp, base_ft;
+ u32 actual_temp_cp, actual_temp_ft;
+};
+
+static int calculate_shared_calibration(struct tsensor_shared_calibration *r)
+{
+ u32 val, shifted_cp, shifted_ft;
+ int err;
+
+ err = tegra_fuse_readl(FUSE_TSENSOR8_CALIB, &val);
+ if (err)
+ return err;
+ r->base_cp = val & FUSE_TSENSOR8_CALIB_CP_TS_BASE_MASK;
+ r->base_ft = (val & FUSE_TSENSOR8_CALIB_FT_TS_BASE_MASK)
+ >> FUSE_TSENSOR8_CALIB_FT_TS_BASE_SHIFT;
+ val = ((val & FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_MASK)
+ >> FUSE_SPARE_REALIGNMENT_REG_SHIFT_FT_SHIFT);
+ shifted_ft = sign_extend32(val, 4);
+
+ err = tegra_fuse_readl(FUSE_SPARE_REALIGNMENT_REG_0, &val);
+ if (err)
+ return err;
+ shifted_cp = sign_extend32(val, 5);
+
+ r->actual_temp_cp = 2 * NOMINAL_CALIB_CP_T124 + shifted_cp;
+ r->actual_temp_ft = 2 * NOMINAL_CALIB_FT_T124 + shifted_ft;
+
+ return 0;
+}
+
+static s64 div64_s64_precise(s64 a, s64 b)
+{
+ s64 r, al;
+
+ /* Scale up for increased precision division */
+ al = a << 16;
+
+ r = div64_s64(al * 2 + 1, 2 * b);
+ return r >> 16;
+}
+
+static int
+calculate_tsensor_calibration(const struct tegra_tsensor *sensor,
+ const struct tsensor_shared_calibration *shared,
+ u32 *calib)
+{
+ u32 val;
+ s32 actual_tsensor_ft, actual_tsensor_cp, delta_sens, delta_temp,
+ mult, div;
+ s16 therma, thermb;
+ s64 tmp;
+ int err;
+
+ err = tegra_fuse_readl(sensor->calib_fuse_offset, &val);
+ if (err)
+ return err;
+
+ actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12);
+ val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK)
+ >> FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT;
+ actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12);
+
+ delta_sens = actual_tsensor_ft - actual_tsensor_cp;
+ delta_temp = shared->actual_temp_ft - shared->actual_temp_cp;
+
+ mult = sensor->config->pdiv * sensor->config->tsample_ate;
+ div = sensor->config->tsample * sensor->config->pdiv_ate;
+
+ therma = div64_s64_precise((s64) delta_temp * (1LL << 13) * mult,
+ (s64) delta_sens * div);
+
+ tmp = (s64)actual_tsensor_ft * shared->actual_temp_cp -
+ (s64)actual_tsensor_cp * shared->actual_temp_ft;
+ thermb = div64_s64_precise(tmp, (s64)delta_sens);
+
+ therma = div64_s64_precise((s64)therma * sensor->fuse_corr_alpha,
+ (s64)1000000LL);
+ thermb = div64_s64_precise((s64)thermb * sensor->fuse_corr_alpha +
+ sensor->fuse_corr_beta, (s64)1000000LL);
+
+ *calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) |
+ ((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT);
+
+ return 0;
+}
+
+static int enable_tsensor(struct tegra_soctherm *tegra,
+ const struct tegra_tsensor *sensor,
+ const struct tsensor_shared_calibration *shared)
+{
+ void __iomem *base = tegra->regs + sensor->base;
+ unsigned int val;
+ u32 calib;
+ int err;
+
+ err = calculate_tsensor_calibration(sensor, shared, &calib);
+ if (err)
+ return err;
+
+ val = sensor->config->tall << SENSOR_CONFIG0_TALL_SHIFT;
+ writel(val, base + SENSOR_CONFIG0);
+
+ val = (sensor->config->tsample - 1) << SENSOR_CONFIG1_TSAMPLE_SHIFT;
+ val |= sensor->config->tiddq_en << SENSOR_CONFIG1_TIDDQ_EN_SHIFT;
+ val |= sensor->config->ten_count << SENSOR_CONFIG1_TEN_COUNT_SHIFT;
+ val |= SENSOR_CONFIG1_TEMP_ENABLE;
+ writel(val, base + SENSOR_CONFIG1);
+
+ writel(calib, base + SENSOR_CONFIG2);
+
+ return 0;
+}
+
+/*
+ * Translate from soctherm readback format to millicelsius.
+ * The soctherm readback format in bits is as follows:
+ * TTTTTTTT H______N
+ * where T's contain the temperature in Celsius,
+ * H denotes an addition of 0.5 Celsius and N denotes negation
+ * of the final value.
+ */
+static long translate_temp(u16 val)
+{
+ long t;
+
+ t = ((val & READBACK_VALUE_MASK) >> READBACK_VALUE_SHIFT) * 1000;
+ if (val & READBACK_ADD_HALF)
+ t += 500;
+ if (val & READBACK_NEGATE)
+ t *= -1;
+
+ return t;
+}
+
+static int tegra_thermctl_get_temp(void *data, long *out_temp)
+{
+ struct tegra_thermctl_zone *zone = data;
+ u32 val;
+
+ val = (readl(zone->reg) >> zone->shift) & SENSOR_TEMP_MASK;
+ *out_temp = translate_temp(val);
+
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops tegra_of_thermal_ops = {
+ .get_temp = tegra_thermctl_get_temp,
+};
+
+static const struct of_device_id tegra_soctherm_of_match[] = {
+ { .compatible = "nvidia,tegra124-soctherm" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, tegra_soctherm_of_match);
+
+struct thermctl_zone_desc {
+ unsigned int offset;
+ unsigned int shift;
+};
+
+static const struct thermctl_zone_desc t124_thermctl_temp_zones[] = {
+ { SENSOR_TEMP1, 16 },
+ { SENSOR_TEMP2, 16 },
+ { SENSOR_TEMP1, 0 },
+ { SENSOR_TEMP2, 0 }
+};
+
+static int tegra_soctherm_probe(struct platform_device *pdev)
+{
+ struct tegra_soctherm *tegra;
+ struct thermal_zone_device *tz;
+ struct tsensor_shared_calibration shared_calib;
+ struct resource *res;
+ unsigned int i;
+ int err;
+
+ const struct tegra_tsensor *tsensors = t124_tsensors;
+
+ tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
+ if (!tegra)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ tegra->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(tegra->regs))
+ return PTR_ERR(tegra->regs);
+
+ tegra->reset = devm_reset_control_get(&pdev->dev, "soctherm");
+ if (IS_ERR(tegra->reset)) {
+ dev_err(&pdev->dev, "can't get soctherm reset\n");
+ return PTR_ERR(tegra->reset);
+ }
+
+ tegra->clock_tsensor = devm_clk_get(&pdev->dev, "tsensor");
+ if (IS_ERR(tegra->clock_tsensor)) {
+ dev_err(&pdev->dev, "can't get tsensor clock\n");
+ return PTR_ERR(tegra->clock_tsensor);
+ }
+
+ tegra->clock_soctherm = devm_clk_get(&pdev->dev, "soctherm");
+ if (IS_ERR(tegra->clock_soctherm)) {
+ dev_err(&pdev->dev, "can't get soctherm clock\n");
+ return PTR_ERR(tegra->clock_soctherm);
+ }
+
+ reset_control_assert(tegra->reset);
+
+ err = clk_prepare_enable(tegra->clock_soctherm);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(tegra->clock_tsensor);
+ if (err) {
+ clk_disable_unprepare(tegra->clock_soctherm);
+ return err;
+ }
+
+ reset_control_deassert(tegra->reset);
+
+ /* Initialize raw sensors */
+
+ err = calculate_shared_calibration(&shared_calib);
+ if (err)
+ goto disable_clocks;
+
+ for (i = 0; i < ARRAY_SIZE(t124_tsensors); ++i) {
+ err = enable_tsensor(tegra, tsensors + i, &shared_calib);
+ if (err)
+ goto disable_clocks;
+ }
+
+ writel(SENSOR_PDIV_T124, tegra->regs + SENSOR_PDIV);
+ writel(SENSOR_HOTSPOT_OFF_T124, tegra->regs + SENSOR_HOTSPOT_OFF);
+
+ /* Initialize thermctl sensors */
+
+ for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
+ struct tegra_thermctl_zone *zone =
+ devm_kzalloc(&pdev->dev, sizeof(*zone), GFP_KERNEL);
+ if (!zone) {
+ err = -ENOMEM;
+ goto unregister_tzs;
+ }
+
+ zone->reg = tegra->regs + t124_thermctl_temp_zones[i].offset;
+ zone->shift = t124_thermctl_temp_zones[i].shift;
+
+ tz = thermal_zone_of_sensor_register(&pdev->dev, i, zone,
+ &tegra_of_thermal_ops);
+ if (IS_ERR(tz)) {
+ err = PTR_ERR(tz);
+ dev_err(&pdev->dev, "failed to register sensor: %d\n",
+ err);
+ goto unregister_tzs;
+ }
+
+ tegra->thermctl_tzs[i] = tz;
+ }
+
+ return 0;
+
+unregister_tzs:
+ while (i--)
+ thermal_zone_of_sensor_unregister(&pdev->dev,
+ tegra->thermctl_tzs[i]);
+
+disable_clocks:
+ clk_disable_unprepare(tegra->clock_tsensor);
+ clk_disable_unprepare(tegra->clock_soctherm);
+
+ return err;
+}
+
+static int tegra_soctherm_remove(struct platform_device *pdev)
+{
+ struct tegra_soctherm *tegra = platform_get_drvdata(pdev);
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(tegra->thermctl_tzs); ++i) {
+ thermal_zone_of_sensor_unregister(&pdev->dev,
+ tegra->thermctl_tzs[i]);
+ }
+
+ clk_disable_unprepare(tegra->clock_tsensor);
+ clk_disable_unprepare(tegra->clock_soctherm);
+
+ return 0;
+}
+
+static struct platform_driver tegra_soctherm_driver = {
+ .probe = tegra_soctherm_probe,
+ .remove = tegra_soctherm_remove,
+ .driver = {
+ .name = "tegra-soctherm",
+ .of_match_table = tegra_soctherm_of_match,
+ },
+};
+module_platform_driver(tegra_soctherm_driver);
+
+MODULE_AUTHOR("Mikko Perttunen <mperttunen@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra SOCTHERM thermal management driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 43b90709585f..84fdf0792e27 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -368,7 +368,7 @@ static void handle_critical_trips(struct thermal_zone_device *tz,
tz->ops->get_trip_temp(tz, trip, &trip_temp);
/* If we have not crossed the trip_temp, we do not care. */
- if (tz->temperature < trip_temp)
+ if (trip_temp <= 0 || tz->temperature < trip_temp)
return;
trace_thermal_zone_trip(tz, trip, trip_type);
@@ -757,6 +757,7 @@ policy_store(struct device *dev, struct device_attribute *attr,
snprintf(name, sizeof(name), "%s", buf);
mutex_lock(&thermal_governor_lock);
+ mutex_lock(&tz->lock);
gov = __find_governor(strim(name));
if (!gov)
@@ -766,6 +767,7 @@ policy_store(struct device *dev, struct device_attribute *attr,
ret = count;
exit:
+ mutex_unlock(&tz->lock);
mutex_unlock(&thermal_governor_lock);
return ret;
}
@@ -1835,10 +1837,10 @@ static int __init thermal_init(void)
exit_netlink:
genetlink_exit();
-unregister_governors:
- thermal_unregister_governors();
unregister_class:
class_unregister(&thermal_class);
+unregister_governors:
+ thermal_unregister_governors();
error:
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index d15d243de27a..9083e7520623 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -89,9 +89,27 @@ static inline void thermal_gov_user_space_unregister(void) {}
#ifdef CONFIG_THERMAL_OF
int of_parse_thermal_zones(void);
void of_thermal_destroy_zones(void);
+int of_thermal_get_ntrips(struct thermal_zone_device *);
+bool of_thermal_is_trip_valid(struct thermal_zone_device *, int);
+const struct thermal_trip * const
+of_thermal_get_trip_points(struct thermal_zone_device *);
#else
static inline int of_parse_thermal_zones(void) { return 0; }
static inline void of_thermal_destroy_zones(void) { }
+static inline int of_thermal_get_ntrips(struct thermal_zone_device *tz)
+{
+ return 0;
+}
+static inline bool of_thermal_is_trip_valid(struct thermal_zone_device *tz,
+ int trip)
+{
+ return 0;
+}
+static inline const struct thermal_trip * const
+of_thermal_get_trip_points(struct thermal_zone_device *tz)
+{
+ return NULL;
+}
#endif
#endif /* __THERMAL_CORE_H__ */
diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
index 9eec26dc0448..5fd03865e396 100644
--- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
@@ -286,6 +286,11 @@ static int ti_thermal_get_crit_temp(struct thermal_zone_device *thermal,
return ti_thermal_get_trip_temp(thermal, OMAP_TRIP_NUMBER - 1, temp);
}
+static const struct thermal_zone_of_device_ops ti_of_thermal_ops = {
+ .get_temp = __ti_thermal_get_temp,
+ .get_trend = __ti_thermal_get_trend,
+};
+
static struct thermal_zone_device_ops ti_thermal_ops = {
.get_temp = ti_thermal_get_temp,
.get_trend = ti_thermal_get_trend,
@@ -333,8 +338,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
/* in case this is specified by DT */
data->ti_thermal = thermal_zone_of_sensor_register(bgp->dev, id,
- data, __ti_thermal_get_temp,
- __ti_thermal_get_trend);
+ data, &ti_of_thermal_ops);
if (IS_ERR(data->ti_thermal)) {
/* Create thermal zone */
data->ti_thermal = thermal_zone_device_register(domain,
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-25 19:19:26 +0000