diff options
Diffstat (limited to 'drivers/thermal/tegra')
| -rw-r--r-- | drivers/thermal/tegra/soctherm.c | 15 |
1 files changed, 13 insertions, 2 deletions
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c index 5acaad3a594f..66e0639da4bf 100644 --- a/drivers/thermal/tegra/soctherm.c +++ b/drivers/thermal/tegra/soctherm.c @@ -360,7 +360,7 @@ static struct soctherm_oc_irq_chip_data soc_irq_cdata; /** * ccroc_writel() - writes a value to a CCROC register * @ts: pointer to a struct tegra_soctherm - * @v: the value to write + * @value: the value to write * @reg: the register offset * * Writes @v to @reg. No return value. @@ -435,6 +435,7 @@ static int tegra_thermctl_get_temp(void *data, int *out_temp) /** * enforce_temp_range() - check and enforce temperature range [min, max] + * @dev: struct device * of the SOC_THERM instance * @trip_temp: the trip temperature to check * * Checks and enforces the permitted temperature range that SOC_THERM @@ -747,6 +748,8 @@ static int get_hot_temp(struct thermal_zone_device *tz, int *trip, int *temp) /** * tegra_soctherm_set_hwtrips() - set HW trip point from DT data * @dev: struct device * of the SOC_THERM instance + * @sg: pointer to the sensor group to set the thermtrip temperature for + * @tz: struct thermal_zone_device * * * Configure the SOC_THERM HW trip points, setting "THERMTRIP" * "THROTTLE" trip points , using "thermtrips", "critical" or "hot" @@ -931,6 +934,7 @@ static irqreturn_t soctherm_thermal_isr_thread(int irq, void *dev_id) /** * soctherm_oc_intr_enable() - Enables the soctherm over-current interrupt + * @ts: pointer to a struct tegra_soctherm * @alarm: The soctherm throttle id * @enable: Flag indicating enable the soctherm over-current * interrupt or disable it @@ -1156,7 +1160,7 @@ static void soctherm_oc_irq_enable(struct irq_data *data) /** * soctherm_oc_irq_disable() - Disables overcurrent interrupt requests - * @irq_data: The interrupt request information + * @data: The interrupt request information * * Clears the interrupt request enable bit of the overcurrent * interrupt request chip data. @@ -1206,6 +1210,7 @@ static int soctherm_oc_irq_map(struct irq_domain *h, unsigned int virq, /** * soctherm_irq_domain_xlate_twocell() - xlate for soctherm interrupts * @d: Interrupt request domain + * @ctrlr: Controller device tree node * @intspec: Array of u32s from DTs "interrupt" property * @intsize: Number of values inside the intspec array * @out_hwirq: HW IRQ value associated with this interrupt @@ -1681,6 +1686,7 @@ err: /** * soctherm_init_hw_throt_cdev() - Parse the HW throttle configurations * and register them as cooling devices. + * @pdev: Pointer to platform_device struct */ static void soctherm_init_hw_throt_cdev(struct platform_device *pdev) { @@ -1751,6 +1757,7 @@ static void soctherm_init_hw_throt_cdev(struct platform_device *pdev) /** * throttlectl_cpu_level_cfg() - programs CCROC NV_THERM level config + * @ts: pointer to a struct tegra_soctherm * @level: describing the level LOW/MED/HIGH of throttling * * It's necessary to set up the CPU-local CCROC NV_THERM instance with @@ -1798,6 +1805,7 @@ static void throttlectl_cpu_level_cfg(struct tegra_soctherm *ts, int level) /** * throttlectl_cpu_level_select() - program CPU pulse skipper config + * @ts: pointer to a struct tegra_soctherm * @throt: the LIGHT/HEAVY of throttle event id * * Pulse skippers are used to throttle clock frequencies. This @@ -1841,6 +1849,7 @@ static void throttlectl_cpu_level_select(struct tegra_soctherm *ts, /** * throttlectl_cpu_mn() - program CPU pulse skipper configuration + * @ts: pointer to a struct tegra_soctherm * @throt: the LIGHT/HEAVY of throttle event id * * Pulse skippers are used to throttle clock frequencies. This @@ -1874,6 +1883,7 @@ static void throttlectl_cpu_mn(struct tegra_soctherm *ts, /** * throttlectl_gpu_level_select() - selects throttling level for GPU + * @ts: pointer to a struct tegra_soctherm * @throt: the LIGHT/HEAVY of throttle event id * * This function programs soctherm's interface to GK20a NV_THERM to select @@ -1918,6 +1928,7 @@ static int soctherm_oc_cfg_program(struct tegra_soctherm *ts, /** * soctherm_throttle_program() - programs pulse skippers' configuration + * @ts: pointer to a struct tegra_soctherm * @throt: the LIGHT/HEAVY of the throttle event id. * * Pulse skippers are used to throttle clock frequencies. |