diff options
Diffstat (limited to 'drivers/scsi/pm8001')
| -rw-r--r-- | drivers/scsi/pm8001/pm8001_hwi.c | 21 |
1 files changed, 11 insertions, 10 deletions
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index fb9848e1d481..47feac5b72e0 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -333,6 +333,7 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha) /** * update_inbnd_queue_table - update the inbound queue table to the HBA. * @pm8001_ha: our hba card information + * @number: entry in the queue */ static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) @@ -354,6 +355,7 @@ static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, /** * update_outbnd_queue_table - update the outbound queue table to the HBA. * @pm8001_ha: our hba card information + * @number: entry in the queue */ static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number) @@ -473,7 +475,7 @@ static void mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, /** * mpi_set_open_retry_interval_reg * @pm8001_ha: our hba card information - * @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us. + * @interval: interval time for each OPEN_REJECT (RETRY). The units are in 1us. */ static void mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha, u32 interval) @@ -1231,6 +1233,7 @@ pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha) /** * pm8001_chip_msix_interrupt_enable - enable PM8001 chip interrupt * @pm8001_ha: our hba card information + * @int_vec_idx: interrupt number to enable */ static void pm8001_chip_msix_interrupt_enable(struct pm8001_hba_info *pm8001_ha, @@ -1249,6 +1252,7 @@ pm8001_chip_msix_interrupt_enable(struct pm8001_hba_info *pm8001_ha, /** * pm8001_chip_msix_interrupt_disable - disable PM8001 chip interrupt * @pm8001_ha: our hba card information + * @int_vec_idx: interrupt number to disable */ static void pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha, @@ -1264,6 +1268,7 @@ pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha, /** * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt * @pm8001_ha: our hba card information + * @vec: unused */ static void pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) @@ -1278,6 +1283,7 @@ pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) /** * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt * @pm8001_ha: our hba card information + * @vec: unused */ static void pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha, u8 vec) @@ -4500,7 +4506,6 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, /** * pm8001_chip_phy_start_req - start phy via PHY_START COMMAND * @pm8001_ha: our hba card information. - * @num: the inbound queue number * @phy_id: the phy id which we wanted to start up. */ static int @@ -4536,7 +4541,6 @@ pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) /** * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND * @pm8001_ha: our hba card information. - * @num: the inbound queue number * @phy_id: the phy id which we wanted to start up. */ static int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha, @@ -4556,7 +4560,7 @@ static int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha, return ret; } -/** +/* * see comments on pm8001_mpi_reg_resp. */ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, @@ -4616,7 +4620,7 @@ static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha, return rc; } -/** +/* * see comments on pm8001_mpi_reg_resp. */ int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha, @@ -4641,7 +4645,6 @@ int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha, /** * pm8001_chip_phy_ctl_req - support the local phy operation * @pm8001_ha: our hba card information. - * @num: the inbound queue number * @phy_id: the phy id which we wanted to operate * @phy_op: */ @@ -4679,7 +4682,6 @@ static u32 pm8001_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha) /** * pm8001_chip_isr - PM8001 isr handler. * @pm8001_ha: our hba card information. - * @irq: irq number. * @stat: stat. */ static irqreturn_t @@ -4717,10 +4719,8 @@ static int send_task_abort(struct pm8001_hba_info *pm8001_ha, u32 opc, return ret; } -/** +/* * pm8001_chip_abort_task - SAS abort task when error or exception happened. - * @task: the task we wanted to aborted. - * @flag: the abort flag. */ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha, struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag, u32 cmd_tag) @@ -4959,6 +4959,7 @@ int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha, * pm8001_chip_fw_flash_update_build - support the firmware update operation * @pm8001_ha: our hba card information. * @fw_flash_updata_info: firmware flash update param + * @tag: Tag to apply to the payload */ int pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha, |