diff options
Diffstat (limited to 'drivers/scsi/pm8001')
-rw-r--r-- | drivers/scsi/pm8001/pm8001_hwi.c | 16 | ||||
-rw-r--r-- | drivers/scsi/pm8001/pm8001_sas.c | 10 | ||||
-rw-r--r-- | drivers/scsi/pm8001/pm80xx_hwi.c | 14 |
3 files changed, 19 insertions, 21 deletions
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index 71aa6af08340..33f8217577b1 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -1930,7 +1930,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) param); if (param == 0) { ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; } else { ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_PROTO_RESPONSE; @@ -2390,7 +2390,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n"); if (param == 0) { ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; /* check if response is for SEND READ LOG */ if (pm8001_dev && (pm8001_dev->id & NCQ_READ_LOG_FLAG)) { @@ -2912,7 +2912,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) case IO_SUCCESS: pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; if (pm8001_dev) atomic_dec(&pm8001_dev->running_req); break; @@ -2939,17 +2939,17 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) case IO_ERROR_HW_TIMEOUT: pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_BUSY; + ts->stat = SAS_SAM_STAT_BUSY; break; case IO_XFER_ERROR_BREAK: pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_BUSY; + ts->stat = SAS_SAM_STAT_BUSY; break; case IO_XFER_ERROR_PHY_NOT_READY: pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_BUSY; + ts->stat = SAS_SAM_STAT_BUSY; break; case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: pm8001_dbg(pm8001_ha, IO, @@ -3710,7 +3710,7 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb) case IO_SUCCESS: pm8001_dbg(pm8001_ha, EH, "IO_SUCCESS\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; break; case IO_NOT_VALID: pm8001_dbg(pm8001_ha, EH, "IO_NOT_VALID\n"); @@ -4357,7 +4357,7 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha, spin_lock_irqsave(&task->task_state_lock, flags); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; task->task_state_flags &= ~SAS_TASK_STATE_PENDING; task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; task->task_state_flags |= SAS_TASK_STATE_DONE; diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c index 335cf37e6cb9..6f33d821e545 100644 --- a/drivers/scsi/pm8001/pm8001_sas.c +++ b/drivers/scsi/pm8001/pm8001_sas.c @@ -118,10 +118,8 @@ int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr, align_offset = (dma_addr_t)align - 1; mem_virt_alloc = dma_alloc_coherent(&pdev->dev, mem_size + align, &mem_dma_handle, GFP_KERNEL); - if (!mem_virt_alloc) { - pr_err("pm80xx: memory allocation error\n"); - return -1; - } + if (!mem_virt_alloc) + return -ENOMEM; *pphys_addr = mem_dma_handle; phys_align = (*pphys_addr + align_offset) & ~align_offset; *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr; @@ -758,7 +756,7 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev, } if (task->task_status.resp == SAS_TASK_COMPLETE && - task->task_status.stat == SAM_STAT_GOOD) { + task->task_status.stat == SAS_SAM_STAT_GOOD) { res = TMF_RESP_FUNC_COMPLETE; break; } @@ -843,7 +841,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha, } if (task->task_status.resp == SAS_TASK_COMPLETE && - task->task_status.stat == SAM_STAT_GOOD) { + task->task_status.stat == SAS_SAM_STAT_GOOD) { res = TMF_RESP_FUNC_COMPLETE; break; diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 700530e969ac..45ecd9639977 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -1952,7 +1952,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) param); if (param == 0) { ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; } else { ts->resp = SAS_TASK_COMPLETE; ts->stat = SAS_PROTO_RESPONSE; @@ -2487,7 +2487,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n"); if (param == 0) { ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; /* check if response is for SEND READ LOG */ if (pm8001_dev && (pm8001_dev->id & NCQ_READ_LOG_FLAG)) { @@ -3042,7 +3042,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) case IO_SUCCESS: pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; if (pm8001_dev) atomic_dec(&pm8001_dev->running_req); if (pm8001_ha->smp_exp_mode == SMP_DIRECT) { @@ -3084,17 +3084,17 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb) case IO_ERROR_HW_TIMEOUT: pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_BUSY; + ts->stat = SAS_SAM_STAT_BUSY; break; case IO_XFER_ERROR_BREAK: pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_BUSY; + ts->stat = SAS_SAM_STAT_BUSY; break; case IO_XFER_ERROR_PHY_NOT_READY: pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n"); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_BUSY; + ts->stat = SAS_SAM_STAT_BUSY; break; case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED: pm8001_dbg(pm8001_ha, IO, @@ -4699,7 +4699,7 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha, spin_lock_irqsave(&task->task_state_lock, flags); ts->resp = SAS_TASK_COMPLETE; - ts->stat = SAM_STAT_GOOD; + ts->stat = SAS_SAM_STAT_GOOD; task->task_state_flags &= ~SAS_TASK_STATE_PENDING; task->task_state_flags &= ~SAS_TASK_AT_INITIATOR; task->task_state_flags |= SAS_TASK_STATE_DONE; |