summaryrefslogtreecommitdiff
path: root/drivers/s390/crypto/z90main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/s390/crypto/z90main.c')
-rw-r--r--drivers/s390/crypto/z90main.c3379
1 files changed, 0 insertions, 3379 deletions
diff --git a/drivers/s390/crypto/z90main.c b/drivers/s390/crypto/z90main.c
deleted file mode 100644
index b2f20ab8431a..000000000000
--- a/drivers/s390/crypto/z90main.c
+++ /dev/null
@@ -1,3379 +0,0 @@
-/*
- * linux/drivers/s390/crypto/z90main.c
- *
- * z90crypt 1.3.3
- *
- * Copyright (C) 2001, 2005 IBM Corporation
- * Author(s): Robert Burroughs (burrough@us.ibm.com)
- * Eric Rossman (edrossma@us.ibm.com)
- *
- * Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/uaccess.h> // copy_(from|to)_user
-#include <linux/compat.h>
-#include <linux/compiler.h>
-#include <linux/delay.h> // mdelay
-#include <linux/init.h>
-#include <linux/interrupt.h> // for tasklets
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/proc_fs.h>
-#include <linux/syscalls.h>
-#include "z90crypt.h"
-#include "z90common.h"
-
-/**
- * Defaults that may be modified.
- */
-
-/**
- * You can specify a different minor at compile time.
- */
-#ifndef Z90CRYPT_MINOR
-#define Z90CRYPT_MINOR MISC_DYNAMIC_MINOR
-#endif
-
-/**
- * You can specify a different domain at compile time or on the insmod
- * command line.
- */
-#ifndef DOMAIN_INDEX
-#define DOMAIN_INDEX -1
-#endif
-
-/**
- * This is the name under which the device is registered in /proc/modules.
- */
-#define REG_NAME "z90crypt"
-
-/**
- * Cleanup should run every CLEANUPTIME seconds and should clean up requests
- * older than CLEANUPTIME seconds in the past.
- */
-#ifndef CLEANUPTIME
-#define CLEANUPTIME 15
-#endif
-
-/**
- * Config should run every CONFIGTIME seconds
- */
-#ifndef CONFIGTIME
-#define CONFIGTIME 30
-#endif
-
-/**
- * The first execution of the config task should take place
- * immediately after initialization
- */
-#ifndef INITIAL_CONFIGTIME
-#define INITIAL_CONFIGTIME 1
-#endif
-
-/**
- * Reader should run every READERTIME milliseconds
- * With the 100Hz patch for s390, z90crypt can lock the system solid while
- * under heavy load. We'll try to avoid that.
- */
-#ifndef READERTIME
-#if HZ > 1000
-#define READERTIME 2
-#else
-#define READERTIME 10
-#endif
-#endif
-
-/**
- * turn long device array index into device pointer
- */
-#define LONG2DEVPTR(ndx) (z90crypt.device_p[(ndx)])
-
-/**
- * turn short device array index into long device array index
- */
-#define SHRT2LONG(ndx) (z90crypt.overall_device_x.device_index[(ndx)])
-
-/**
- * turn short device array index into device pointer
- */
-#define SHRT2DEVPTR(ndx) LONG2DEVPTR(SHRT2LONG(ndx))
-
-/**
- * Status for a work-element
- */
-#define STAT_DEFAULT 0x00 // request has not been processed
-
-#define STAT_ROUTED 0x80 // bit 7: requests get routed to specific device
- // else, device is determined each write
-#define STAT_FAILED 0x40 // bit 6: this bit is set if the request failed
- // before being sent to the hardware.
-#define STAT_WRITTEN 0x30 // bits 5-4: work to be done, not sent to device
-// 0x20 // UNUSED state
-#define STAT_READPEND 0x10 // bits 5-4: work done, we're returning data now
-#define STAT_NOWORK 0x00 // bits off: no work on any queue
-#define STAT_RDWRMASK 0x30 // mask for bits 5-4
-
-/**
- * Macros to check the status RDWRMASK
- */
-#define CHK_RDWRMASK(statbyte) ((statbyte) & STAT_RDWRMASK)
-#define SET_RDWRMASK(statbyte, newval) \
- {(statbyte) &= ~STAT_RDWRMASK; (statbyte) |= newval;}
-
-/**
- * Audit Trail. Progress of a Work element
- * audit[0]: Unless noted otherwise, these bits are all set by the process
- */
-#define FP_COPYFROM 0x80 // Caller's buffer has been copied to work element
-#define FP_BUFFREQ 0x40 // Low Level buffer requested
-#define FP_BUFFGOT 0x20 // Low Level buffer obtained
-#define FP_SENT 0x10 // Work element sent to a crypto device
- // (may be set by process or by reader task)
-#define FP_PENDING 0x08 // Work element placed on pending queue
- // (may be set by process or by reader task)
-#define FP_REQUEST 0x04 // Work element placed on request queue
-#define FP_ASLEEP 0x02 // Work element about to sleep
-#define FP_AWAKE 0x01 // Work element has been awakened
-
-/**
- * audit[1]: These bits are set by the reader task and/or the cleanup task
- */
-#define FP_NOTPENDING 0x80 // Work element removed from pending queue
-#define FP_AWAKENING 0x40 // Caller about to be awakened
-#define FP_TIMEDOUT 0x20 // Caller timed out
-#define FP_RESPSIZESET 0x10 // Response size copied to work element
-#define FP_RESPADDRCOPIED 0x08 // Response address copied to work element
-#define FP_RESPBUFFCOPIED 0x04 // Response buffer copied to work element
-#define FP_REMREQUEST 0x02 // Work element removed from request queue
-#define FP_SIGNALED 0x01 // Work element was awakened by a signal
-
-/**
- * audit[2]: unused
- */
-
-/**
- * state of the file handle in private_data.status
- */
-#define STAT_OPEN 0
-#define STAT_CLOSED 1
-
-/**
- * PID() expands to the process ID of the current process
- */
-#define PID() (current->pid)
-
-/**
- * Selected Constants. The number of APs and the number of devices
- */
-#ifndef Z90CRYPT_NUM_APS
-#define Z90CRYPT_NUM_APS 64
-#endif
-#ifndef Z90CRYPT_NUM_DEVS
-#define Z90CRYPT_NUM_DEVS Z90CRYPT_NUM_APS
-#endif
-
-/**
- * Buffer size for receiving responses. The maximum Response Size
- * is actually the maximum request size, since in an error condition
- * the request itself may be returned unchanged.
- */
-#define MAX_RESPONSE_SIZE 0x0000077C
-
-/**
- * A count and status-byte mask
- */
-struct status {
- int st_count; // # of enabled devices
- int disabled_count; // # of disabled devices
- int user_disabled_count; // # of devices disabled via proc fs
- unsigned char st_mask[Z90CRYPT_NUM_APS]; // current status mask
-};
-
-/**
- * The array of device indexes is a mechanism for fast indexing into
- * a long (and sparse) array. For instance, if APs 3, 9 and 47 are
- * installed, z90CDeviceIndex[0] is 3, z90CDeviceIndex[1] is 9, and
- * z90CDeviceIndex[2] is 47.
- */
-struct device_x {
- int device_index[Z90CRYPT_NUM_DEVS];
-};
-
-/**
- * All devices are arranged in a single array: 64 APs
- */
-struct device {
- int dev_type; // PCICA, PCICC, PCIXCC_MCL2,
- // PCIXCC_MCL3, CEX2C, CEX2A
- enum devstat dev_stat; // current device status
- int dev_self_x; // Index in array
- int disabled; // Set when device is in error
- int user_disabled; // Set when device is disabled by user
- int dev_q_depth; // q depth
- unsigned char * dev_resp_p; // Response buffer address
- int dev_resp_l; // Response Buffer length
- int dev_caller_count; // Number of callers
- int dev_total_req_cnt; // # requests for device since load
- struct list_head dev_caller_list; // List of callers
-};
-
-/**
- * There's a struct status and a struct device_x for each device type.
- */
-struct hdware_block {
- struct status hdware_mask;
- struct status type_mask[Z90CRYPT_NUM_TYPES];
- struct device_x type_x_addr[Z90CRYPT_NUM_TYPES];
- unsigned char device_type_array[Z90CRYPT_NUM_APS];
-};
-
-/**
- * z90crypt is the topmost data structure in the hierarchy.
- */
-struct z90crypt {
- int max_count; // Nr of possible crypto devices
- struct status mask;
- int q_depth_array[Z90CRYPT_NUM_DEVS];
- int dev_type_array[Z90CRYPT_NUM_DEVS];
- struct device_x overall_device_x; // array device indexes
- struct device * device_p[Z90CRYPT_NUM_DEVS];
- int terminating;
- int domain_established;// TRUE: domain has been found
- int cdx; // Crypto Domain Index
- int len; // Length of this data structure
- struct hdware_block *hdware_info;
-};
-
-/**
- * An array of these structures is pointed to from dev_caller
- * The length of the array depends on the device type. For APs,
- * there are 8.
- *
- * The caller buffer is allocated to the user at OPEN. At WRITE,
- * it contains the request; at READ, the response. The function
- * send_to_crypto_device converts the request to device-dependent
- * form and use the caller's OPEN-allocated buffer for the response.
- *
- * For the contents of caller_dev_dep_req and caller_dev_dep_req_p
- * because that points to it, see the discussion in z90hardware.c.
- * Search for "extended request message block".
- */
-struct caller {
- int caller_buf_l; // length of original request
- unsigned char * caller_buf_p; // Original request on WRITE
- int caller_dev_dep_req_l; // len device dependent request
- unsigned char * caller_dev_dep_req_p; // Device dependent form
- unsigned char caller_id[8]; // caller-supplied message id
- struct list_head caller_liste;
- unsigned char caller_dev_dep_req[MAX_RESPONSE_SIZE];
-};
-
-/**
- * Function prototypes from z90hardware.c
- */
-enum hdstat query_online(int deviceNr, int cdx, int resetNr, int *q_depth,
- int *dev_type);
-enum devstat reset_device(int deviceNr, int cdx, int resetNr);
-enum devstat send_to_AP(int dev_nr, int cdx, int msg_len, unsigned char *msg_ext);
-enum devstat receive_from_AP(int dev_nr, int cdx, int resplen,
- unsigned char *resp, unsigned char *psmid);
-int convert_request(unsigned char *buffer, int func, unsigned short function,
- int cdx, int dev_type, int *msg_l_p, unsigned char *msg_p);
-int convert_response(unsigned char *response, unsigned char *buffer,
- int *respbufflen_p, unsigned char *resp_buff);
-
-/**
- * Low level function prototypes
- */
-static int create_z90crypt(int *cdx_p);
-static int refresh_z90crypt(int *cdx_p);
-static int find_crypto_devices(struct status *deviceMask);
-static int create_crypto_device(int index);
-static int destroy_crypto_device(int index);
-static void destroy_z90crypt(void);
-static int refresh_index_array(struct status *status_str,
- struct device_x *index_array);
-static int probe_device_type(struct device *devPtr);
-static int probe_PCIXCC_type(struct device *devPtr);
-
-/**
- * proc fs definitions
- */
-static struct proc_dir_entry *z90crypt_entry;
-
-/**
- * data structures
- */
-
-/**
- * work_element.opener points back to this structure
- */
-struct priv_data {
- pid_t opener_pid;
- unsigned char status; // 0: open 1: closed
-};
-
-/**
- * A work element is allocated for each request
- */
-struct work_element {
- struct priv_data *priv_data;
- pid_t pid;
- int devindex; // index of device processing this w_e
- // (If request did not specify device,
- // -1 until placed onto a queue)
- int devtype;
- struct list_head liste; // used for requestq and pendingq
- char buffer[128]; // local copy of user request
- int buff_size; // size of the buffer for the request
- char resp_buff[RESPBUFFSIZE];
- int resp_buff_size;
- char __user * resp_addr; // address of response in user space
- unsigned int funccode; // function code of request
- wait_queue_head_t waitq;
- unsigned long requestsent; // time at which the request was sent
- atomic_t alarmrung; // wake-up signal
- unsigned char caller_id[8]; // pid + counter, for this w_e
- unsigned char status[1]; // bits to mark status of the request
- unsigned char audit[3]; // record of work element's progress
- unsigned char * requestptr; // address of request buffer
- int retcode; // return code of request
-};
-
-/**
- * High level function prototypes
- */
-static int z90crypt_open(struct inode *, struct file *);
-static int z90crypt_release(struct inode *, struct file *);
-static ssize_t z90crypt_read(struct file *, char __user *, size_t, loff_t *);
-static ssize_t z90crypt_write(struct file *, const char __user *,
- size_t, loff_t *);
-static long z90crypt_unlocked_ioctl(struct file *, unsigned int, unsigned long);
-static long z90crypt_compat_ioctl(struct file *, unsigned int, unsigned long);
-
-static void z90crypt_reader_task(unsigned long);
-static void z90crypt_schedule_reader_task(unsigned long);
-static void z90crypt_config_task(unsigned long);
-static void z90crypt_cleanup_task(unsigned long);
-
-static int z90crypt_status(char *, char **, off_t, int, int *, void *);
-static int z90crypt_status_write(struct file *, const char __user *,
- unsigned long, void *);
-
-/**
- * Storage allocated at initialization and used throughout the life of
- * this insmod
- */
-static int domain = DOMAIN_INDEX;
-static struct z90crypt z90crypt;
-static int quiesce_z90crypt;
-static spinlock_t queuespinlock;
-static struct list_head request_list;
-static int requestq_count;
-static struct list_head pending_list;
-static int pendingq_count;
-
-static struct tasklet_struct reader_tasklet;
-static struct timer_list reader_timer;
-static struct timer_list config_timer;
-static struct timer_list cleanup_timer;
-static atomic_t total_open;
-static atomic_t z90crypt_step;
-
-static struct file_operations z90crypt_fops = {
- .owner = THIS_MODULE,
- .read = z90crypt_read,
- .write = z90crypt_write,
- .unlocked_ioctl = z90crypt_unlocked_ioctl,
-#ifdef CONFIG_COMPAT
- .compat_ioctl = z90crypt_compat_ioctl,
-#endif
- .open = z90crypt_open,
- .release = z90crypt_release
-};
-
-static struct miscdevice z90crypt_misc_device = {
- .minor = Z90CRYPT_MINOR,
- .name = DEV_NAME,
- .fops = &z90crypt_fops,
-};
-
-/**
- * Documentation values.
- */
-MODULE_AUTHOR("zSeries Linux Crypto Team: Robert H. Burroughs, Eric D. Rossman"
- "and Jochen Roehrig");
-MODULE_DESCRIPTION("zSeries Linux Cryptographic Coprocessor device driver, "
- "Copyright 2001, 2005 IBM Corporation");
-MODULE_LICENSE("GPL");
-module_param(domain, int, 0);
-MODULE_PARM_DESC(domain, "domain index for device");
-
-#ifdef CONFIG_COMPAT
-/**
- * ioctl32 conversion routines
- */
-struct ica_rsa_modexpo_32 { // For 32-bit callers
- compat_uptr_t inputdata;
- unsigned int inputdatalength;
- compat_uptr_t outputdata;
- unsigned int outputdatalength;
- compat_uptr_t b_key;
- compat_uptr_t n_modulus;
-};
-
-static long
-trans_modexpo32(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- struct ica_rsa_modexpo_32 __user *mex32u = compat_ptr(arg);
- struct ica_rsa_modexpo_32 mex32k;
- struct ica_rsa_modexpo __user *mex64;
- long ret = 0;
- unsigned int i;
-
- if (!access_ok(VERIFY_WRITE, mex32u, sizeof(struct ica_rsa_modexpo_32)))
- return -EFAULT;
- mex64 = compat_alloc_user_space(sizeof(struct ica_rsa_modexpo));
- if (!access_ok(VERIFY_WRITE, mex64, sizeof(struct ica_rsa_modexpo)))
- return -EFAULT;
- if (copy_from_user(&mex32k, mex32u, sizeof(struct ica_rsa_modexpo_32)))
- return -EFAULT;
- if (__put_user(compat_ptr(mex32k.inputdata), &mex64->inputdata) ||
- __put_user(mex32k.inputdatalength, &mex64->inputdatalength) ||
- __put_user(compat_ptr(mex32k.outputdata), &mex64->outputdata) ||
- __put_user(mex32k.outputdatalength, &mex64->outputdatalength) ||
- __put_user(compat_ptr(mex32k.b_key), &mex64->b_key) ||
- __put_user(compat_ptr(mex32k.n_modulus), &mex64->n_modulus))
- return -EFAULT;
- ret = z90crypt_unlocked_ioctl(filp, cmd, (unsigned long)mex64);
- if (!ret)
- if (__get_user(i, &mex64->outputdatalength) ||
- __put_user(i, &mex32u->outputdatalength))
- ret = -EFAULT;
- return ret;
-}
-
-struct ica_rsa_modexpo_crt_32 { // For 32-bit callers
- compat_uptr_t inputdata;
- unsigned int inputdatalength;
- compat_uptr_t outputdata;
- unsigned int outputdatalength;
- compat_uptr_t bp_key;
- compat_uptr_t bq_key;
- compat_uptr_t np_prime;
- compat_uptr_t nq_prime;
- compat_uptr_t u_mult_inv;
-};
-
-static long
-trans_modexpo_crt32(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- struct ica_rsa_modexpo_crt_32 __user *crt32u = compat_ptr(arg);
- struct ica_rsa_modexpo_crt_32 crt32k;
- struct ica_rsa_modexpo_crt __user *crt64;
- long ret = 0;
- unsigned int i;
-
- if (!access_ok(VERIFY_WRITE, crt32u,
- sizeof(struct ica_rsa_modexpo_crt_32)))
- return -EFAULT;
- crt64 = compat_alloc_user_space(sizeof(struct ica_rsa_modexpo_crt));
- if (!access_ok(VERIFY_WRITE, crt64, sizeof(struct ica_rsa_modexpo_crt)))
- return -EFAULT;
- if (copy_from_user(&crt32k, crt32u,
- sizeof(struct ica_rsa_modexpo_crt_32)))
- return -EFAULT;
- if (__put_user(compat_ptr(crt32k.inputdata), &crt64->inputdata) ||
- __put_user(crt32k.inputdatalength, &crt64->inputdatalength) ||
- __put_user(compat_ptr(crt32k.outputdata), &crt64->outputdata) ||
- __put_user(crt32k.outputdatalength, &crt64->outputdatalength) ||
- __put_user(compat_ptr(crt32k.bp_key), &crt64->bp_key) ||
- __put_user(compat_ptr(crt32k.bq_key), &crt64->bq_key) ||
- __put_user(compat_ptr(crt32k.np_prime), &crt64->np_prime) ||
- __put_user(compat_ptr(crt32k.nq_prime), &crt64->nq_prime) ||
- __put_user(compat_ptr(crt32k.u_mult_inv), &crt64->u_mult_inv))
- return -EFAULT;
- ret = z90crypt_unlocked_ioctl(filp, cmd, (unsigned long)crt64);
- if (!ret)
- if (__get_user(i, &crt64->outputdatalength) ||
- __put_user(i, &crt32u->outputdatalength))
- ret = -EFAULT;
- return ret;
-}
-
-static long
-z90crypt_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- switch (cmd) {
- case ICAZ90STATUS:
- case Z90QUIESCE:
- case Z90STAT_TOTALCOUNT:
- case Z90STAT_PCICACOUNT:
- case Z90STAT_PCICCCOUNT:
- case Z90STAT_PCIXCCCOUNT:
- case Z90STAT_PCIXCCMCL2COUNT:
- case Z90STAT_PCIXCCMCL3COUNT:
- case Z90STAT_CEX2CCOUNT:
- case Z90STAT_REQUESTQ_COUNT:
- case Z90STAT_PENDINGQ_COUNT:
- case Z90STAT_TOTALOPEN_COUNT:
- case Z90STAT_DOMAIN_INDEX:
- case Z90STAT_STATUS_MASK:
- case Z90STAT_QDEPTH_MASK:
- case Z90STAT_PERDEV_REQCNT:
- return z90crypt_unlocked_ioctl(filp, cmd, arg);
- case ICARSAMODEXPO:
- return trans_modexpo32(filp, cmd, arg);
- case ICARSACRT:
- return trans_modexpo_crt32(filp, cmd, arg);
- default:
- return -ENOIOCTLCMD;
- }
-}
-#endif
-
-/**
- * The module initialization code.
- */
-static int __init
-z90crypt_init_module(void)
-{
- int result, nresult;
- struct proc_dir_entry *entry;
-
- PDEBUG("PID %d\n", PID());
-
- if ((domain < -1) || (domain > 15)) {
- PRINTKW("Invalid param: domain = %d. Not loading.\n", domain);
- return -EINVAL;
- }
-
- /* Register as misc device with given minor (or get a dynamic one). */
- result = misc_register(&z90crypt_misc_device);
- if (result < 0) {
- PRINTKW(KERN_ERR "misc_register (minor %d) failed with %d\n",
- z90crypt_misc_device.minor, result);
- return result;
- }
-
- PDEBUG("Registered " DEV_NAME " with result %d\n", result);
-
- result = create_z90crypt(&domain);
- if (result != 0) {
- PRINTKW("create_z90crypt (domain index %d) failed with %d.\n",
- domain, result);
- result = -ENOMEM;
- goto init_module_cleanup;
- }
-
- if (result == 0) {
- PRINTKN("Version %d.%d.%d loaded, built on %s %s\n",
- z90crypt_VERSION, z90crypt_RELEASE, z90crypt_VARIANT,
- __DATE__, __TIME__);
- PDEBUG("create_z90crypt (domain index %d) successful.\n",
- domain);
- } else
- PRINTK("No devices at startup\n");
-
- /* Initialize globals. */
- spin_lock_init(&queuespinlock);
-
- INIT_LIST_HEAD(&pending_list);
- pendingq_count = 0;
-
- INIT_LIST_HEAD(&request_list);
- requestq_count = 0;
-
- quiesce_z90crypt = 0;
-
- atomic_set(&total_open, 0);
- atomic_set(&z90crypt_step, 0);
-
- /* Set up the cleanup task. */
- init_timer(&cleanup_timer);
- cleanup_timer.function = z90crypt_cleanup_task;
- cleanup_timer.data = 0;
- cleanup_timer.expires = jiffies + (CLEANUPTIME * HZ);
- add_timer(&cleanup_timer);
-
- /* Set up the proc file system */
- entry = create_proc_entry("driver/z90crypt", 0644, 0);
- if (entry) {
- entry->nlink = 1;
- entry->data = 0;
- entry->read_proc = z90crypt_status;
- entry->write_proc = z90crypt_status_write;
- }
- else
- PRINTK("Couldn't create z90crypt proc entry\n");
- z90crypt_entry = entry;
-
- /* Set up the configuration task. */
- init_timer(&config_timer);
- config_timer.function = z90crypt_config_task;
- config_timer.data = 0;
- config_timer.expires = jiffies + (INITIAL_CONFIGTIME * HZ);
- add_timer(&config_timer);
-
- /* Set up the reader task */
- tasklet_init(&reader_tasklet, z90crypt_reader_task, 0);
- init_timer(&reader_timer);
- reader_timer.function = z90crypt_schedule_reader_task;
- reader_timer.data = 0;
- reader_timer.expires = jiffies + (READERTIME * HZ / 1000);
- add_timer(&reader_timer);
-
- return 0; // success
-
-init_module_cleanup:
- if ((nresult = misc_deregister(&z90crypt_misc_device)))
- PRINTK("misc_deregister failed with %d.\n", nresult);
- else
- PDEBUG("misc_deregister successful.\n");
-
- return result; // failure
-}
-
-/**
- * The module termination code
- */
-static void __exit
-z90crypt_cleanup_module(void)
-{
- int nresult;
-
- PDEBUG("PID %d\n", PID());
-
- remove_proc_entry("driver/z90crypt", 0);
-
- if ((nresult = misc_deregister(&z90crypt_misc_device)))
- PRINTK("misc_deregister failed with %d.\n", nresult);
- else
- PDEBUG("misc_deregister successful.\n");
-
- /* Remove the tasks */
- tasklet_kill(&reader_tasklet);
- del_timer(&reader_timer);
- del_timer(&config_timer);
- del_timer(&cleanup_timer);
-
- destroy_z90crypt();
-
- PRINTKN("Unloaded.\n");
-}
-
-/**
- * Functions running under a process id
- *
- * The I/O functions:
- * z90crypt_open
- * z90crypt_release
- * z90crypt_read
- * z90crypt_write
- * z90crypt_unlocked_ioctl
- * z90crypt_status
- * z90crypt_status_write
- * disable_card
- * enable_card
- *
- * Helper functions:
- * z90crypt_rsa
- * z90crypt_prepare
- * z90crypt_send
- * z90crypt_process_results
- *
- */
-static int
-z90crypt_open(struct inode *inode, struct file *filp)
-{
- struct priv_data *private_data_p;
-
- if (quiesce_z90crypt)
- return -EQUIESCE;
-
- private_data_p = kzalloc(sizeof(struct priv_data), GFP_KERNEL);
- if (!private_data_p) {
- PRINTK("Memory allocate failed\n");
- return -ENOMEM;
- }
-
- private_data_p->status = STAT_OPEN;
- private_data_p->opener_pid = PID();
- filp->private_data = private_data_p;
- atomic_inc(&total_open);
-
- return 0;
-}
-
-static int
-z90crypt_release(struct inode *inode, struct file *filp)
-{
- struct priv_data *private_data_p = filp->private_data;
-
- PDEBUG("PID %d (filp %p)\n", PID(), filp);
-
- private_data_p->status = STAT_CLOSED;
- memset(private_data_p, 0, sizeof(struct priv_data));
- kfree(private_data_p);
- atomic_dec(&total_open);
-
- return 0;
-}
-
-/*
- * there are two read functions, of which compile options will choose one
- * without USE_GET_RANDOM_BYTES
- * => read() always returns -EPERM;
- * otherwise
- * => read() uses get_random_bytes() kernel function
- */
-#ifndef USE_GET_RANDOM_BYTES
-/**
- * z90crypt_read will not be supported beyond z90crypt 1.3.1
- */
-static ssize_t
-z90crypt_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
-{
- PDEBUG("filp %p (PID %d)\n", filp, PID());
- return -EPERM;
-}
-#else // we want to use get_random_bytes
-/**
- * read() just returns a string of random bytes. Since we have no way
- * to generate these cryptographically, we just execute get_random_bytes
- * for the length specified.
- */
-#include <linux/random.h>
-static ssize_t
-z90crypt_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
-{
- unsigned char *temp_buff;
-
- PDEBUG("filp %p (PID %d)\n", filp, PID());
-
- if (quiesce_z90crypt)
- return -EQUIESCE;
- if (count < 0) {
- PRINTK("Requested random byte count negative: %ld\n", count);
- return -EINVAL;
- }
- if (count > RESPBUFFSIZE) {
- PDEBUG("count[%d] > RESPBUFFSIZE", count);
- return -EINVAL;
- }
- if (count == 0)
- return 0;
- temp_buff = kmalloc(RESPBUFFSIZE, GFP_KERNEL);
- if (!temp_buff) {
- PRINTK("Memory allocate failed\n");
- return -ENOMEM;
- }
- get_random_bytes(temp_buff, count);
-
- if (copy_to_user(buf, temp_buff, count) != 0) {
- kfree(temp_buff);
- return -EFAULT;
- }
- kfree(temp_buff);
- return count;
-}
-#endif
-
-/**
- * Write is is not allowed
- */
-static ssize_t
-z90crypt_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos)
-{
- PDEBUG("filp %p (PID %d)\n", filp, PID());
- return -EPERM;
-}
-
-/**
- * New status functions
- */
-static inline int
-get_status_totalcount(void)
-{
- return z90crypt.hdware_info->hdware_mask.st_count;
-}
-
-static inline int
-get_status_PCICAcount(void)
-{
- return z90crypt.hdware_info->type_mask[PCICA].st_count;
-}
-
-static inline int
-get_status_PCICCcount(void)
-{
- return z90crypt.hdware_info->type_mask[PCICC].st_count;
-}
-
-static inline int
-get_status_PCIXCCcount(void)
-{
- return z90crypt.hdware_info->type_mask[PCIXCC_MCL2].st_count +
- z90crypt.hdware_info->type_mask[PCIXCC_MCL3].st_count;
-}
-
-static inline int
-get_status_PCIXCCMCL2count(void)
-{
- return z90crypt.hdware_info->type_mask[PCIXCC_MCL2].st_count;
-}
-
-static inline int
-get_status_PCIXCCMCL3count(void)
-{
- return z90crypt.hdware_info->type_mask[PCIXCC_MCL3].st_count;
-}
-
-static inline int
-get_status_CEX2Ccount(void)
-{
- return z90crypt.hdware_info->type_mask[CEX2C].st_count;
-}
-
-static inline int
-get_status_CEX2Acount(void)
-{
- return z90crypt.hdware_info->type_mask[CEX2A].st_count;
-}
-
-static inline int
-get_status_requestq_count(void)
-{
- return requestq_count;
-}
-
-static inline int
-get_status_pendingq_count(void)
-{
- return pendingq_count;
-}
-
-static inline int
-get_status_totalopen_count(void)
-{
- return atomic_read(&total_open);
-}
-
-static inline int
-get_status_domain_index(void)
-{
- return z90crypt.cdx;
-}
-
-static inline unsigned char *
-get_status_status_mask(unsigned char status[Z90CRYPT_NUM_APS])
-{
- int i, ix;
-
- memcpy(status, z90crypt.hdware_info->device_type_array,
- Z90CRYPT_NUM_APS);
-
- for (i = 0; i < get_status_totalcount(); i++) {
- ix = SHRT2LONG(i);
- if (LONG2DEVPTR(ix)->user_disabled)
- status[ix] = 0x0d;
- }
-
- return status;
-}
-
-static inline unsigned char *
-get_status_qdepth_mask(unsigned char qdepth[Z90CRYPT_NUM_APS])
-{
- int i, ix;
-
- memset(qdepth, 0, Z90CRYPT_NUM_APS);
-
- for (i = 0; i < get_status_totalcount(); i++) {
- ix = SHRT2LONG(i);
- qdepth[ix] = LONG2DEVPTR(ix)->dev_caller_count;
- }
-
- return qdepth;
-}
-
-static inline unsigned int *
-get_status_perdevice_reqcnt(unsigned int reqcnt[Z90CRYPT_NUM_APS])
-{
- int i, ix;
-
- memset(reqcnt, 0, Z90CRYPT_NUM_APS * sizeof(int));
-
- for (i = 0; i < get_status_totalcount(); i++) {
- ix = SHRT2LONG(i);
- reqcnt[ix] = LONG2DEVPTR(ix)->dev_total_req_cnt;
- }
-
- return reqcnt;
-}
-
-static inline void
-init_work_element(struct work_element *we_p,
- struct priv_data *priv_data, pid_t pid)
-{
- int step;
-
- we_p->requestptr = (unsigned char *)we_p + sizeof(struct work_element);
- /* Come up with a unique id for this caller. */
- step = atomic_inc_return(&z90crypt_step);
- memcpy(we_p->caller_id+0, (void *) &pid, sizeof(pid));
- memcpy(we_p->caller_id+4, (void *) &step, sizeof(step));
- we_p->pid = pid;
- we_p->priv_data = priv_data;
- we_p->status[0] = STAT_DEFAULT;
- we_p->audit[0] = 0x00;
- we_p->audit[1] = 0x00;
- we_p->audit[2] = 0x00;
- we_p->resp_buff_size = 0;
- we_p->retcode = 0;
- we_p->devindex = -1;
- we_p->devtype = -1;
- atomic_set(&we_p->alarmrung, 0);
- init_waitqueue_head(&we_p->waitq);
- INIT_LIST_HEAD(&(we_p->liste));
-}
-
-static inline int
-allocate_work_element(struct work_element **we_pp,
- struct priv_data *priv_data_p, pid_t pid)
-{
- struct work_element *we_p;
-
- we_p = (struct work_element *) get_zeroed_page(GFP_KERNEL);
- if (!we_p)
- return -ENOMEM;
- init_work_element(we_p, priv_data_p, pid);
- *we_pp = we_p;
- return 0;
-}
-
-static inline void
-remove_device(struct device *device_p)
-{
- if (!device_p || (device_p->disabled != 0))
- return;
- device_p->disabled = 1;
- z90crypt.hdware_info->type_mask[device_p->dev_type].disabled_count++;
- z90crypt.hdware_info->hdware_mask.disabled_count++;
-}
-
-/**
- * Bitlength limits for each card
- *
- * There are new MCLs which allow more bitlengths. See the table for details.
- * The MCL must be applied and the newer bitlengths enabled for these to work.
- *
- * Card Type Old limit New limit
- * PCICA ??-2048 same (the lower limit is less than 128 bit...)
- * PCICC 512-1024 512-2048
- * PCIXCC_MCL2 512-2048 ----- (applying any GA LIC will make an MCL3 card)
- * PCIXCC_MCL3 ----- 128-2048
- * CEX2C 512-2048 128-2048
- * CEX2A ??-2048 same (the lower limit is less than 128 bit...)
- *
- * ext_bitlens (extended bitlengths) is a global, since you should not apply an
- * MCL to just one card in a machine. We assume, at first, that all cards have
- * these capabilities.
- */
-int ext_bitlens = 1; // This is global
-#define PCIXCC_MIN_MOD_SIZE 16 // 128 bits
-#define OLD_PCIXCC_MIN_MOD_SIZE 64 // 512 bits
-#define PCICC_MIN_MOD_SIZE 64 // 512 bits
-#define OLD_PCICC_MAX_MOD_SIZE 128 // 1024 bits
-#define MAX_MOD_SIZE 256 // 2048 bits
-
-static inline int
-select_device_type(int *dev_type_p, int bytelength)
-{
- static int count = 0;
- int PCICA_avail, PCIXCC_MCL3_avail, CEX2C_avail, CEX2A_avail,
- index_to_use;
- struct status *stat;
- if ((*dev_type_p != PCICC) && (*dev_type_p != PCICA) &&
- (*dev_type_p != PCIXCC_MCL2) && (*dev_type_p != PCIXCC_MCL3) &&
- (*dev_type_p != CEX2C) && (*dev_type_p != CEX2A) &&
- (*dev_type_p != ANYDEV))
- return -1;
- if (*dev_type_p != ANYDEV) {
- stat = &z90crypt.hdware_info->type_mask[*dev_type_p];
- if (stat->st_count >
- (stat->disabled_count + stat->user_disabled_count))
- return 0;
- return -1;
- }
-
- /**
- * Assumption: PCICA, PCIXCC_MCL3, CEX2C, and CEX2A are all similar in
- * speed.
- *
- * PCICA and CEX2A do NOT co-exist, so it would be either one or the
- * other present.
- */
- stat = &z90crypt.hdware_info->type_mask[PCICA];
- PCICA_avail = stat->st_count -
- (stat->disabled_count + stat->user_disabled_count);
- stat = &z90crypt.hdware_info->type_mask[PCIXCC_MCL3];
- PCIXCC_MCL3_avail = stat->st_count -
- (stat->disabled_count + stat->user_disabled_count);
- stat = &z90crypt.hdware_info->type_mask[CEX2C];
- CEX2C_avail = stat->st_count -
- (stat->disabled_count + stat->user_disabled_count);
- stat = &z90crypt.hdware_info->type_mask[CEX2A];
- CEX2A_avail = stat->st_count -
- (stat->disabled_count + stat->user_disabled_count);
- if (PCICA_avail || PCIXCC_MCL3_avail || CEX2C_avail || CEX2A_avail) {
- /**
- * bitlength is a factor, PCICA or CEX2A are the most capable,
- * even with the new MCL for PCIXCC.
- */
- if ((bytelength < PCIXCC_MIN_MOD_SIZE) ||
- (!ext_bitlens && (bytelength < OLD_PCIXCC_MIN_MOD_SIZE))) {
- if (PCICA_avail) {
- *dev_type_p = PCICA;
- return 0;
- }
- if (CEX2A_avail) {
- *dev_type_p = CEX2A;
- return 0;
- }
- return -1;
- }
-
- index_to_use = count % (PCICA_avail + PCIXCC_MCL3_avail +
- CEX2C_avail + CEX2A_avail);
- if (index_to_use < PCICA_avail)
- *dev_type_p = PCICA;
- else if (index_to_use < (PCICA_avail + PCIXCC_MCL3_avail))
- *dev_type_p = PCIXCC_MCL3;
- else if (index_to_use < (PCICA_avail + PCIXCC_MCL3_avail +
- CEX2C_avail))
- *dev_type_p = CEX2C;
- else
- *dev_type_p = CEX2A;
- count++;
- return 0;
- }
-
- /* Less than OLD_PCIXCC_MIN_MOD_SIZE cannot go to a PCIXCC_MCL2 */
- if (bytelength < OLD_PCIXCC_MIN_MOD_SIZE)
- return -1;
- stat = &z90crypt.hdware_info->type_mask[PCIXCC_MCL2];
- if (stat->st_count >
- (stat->disabled_count + stat->user_disabled_count)) {
- *dev_type_p = PCIXCC_MCL2;
- return 0;
- }
-
- /**
- * Less than PCICC_MIN_MOD_SIZE or more than OLD_PCICC_MAX_MOD_SIZE
- * (if we don't have the MCL applied and the newer bitlengths enabled)
- * cannot go to a PCICC
- */
- if ((bytelength < PCICC_MIN_MOD_SIZE) ||
- (!ext_bitlens && (bytelength > OLD_PCICC_MAX_MOD_SIZE))) {
- return -1;
- }
- stat = &z90crypt.hdware_info->type_mask[PCICC];
- if (stat->st_count >
- (stat->disabled_count + stat->user_disabled_count)) {
- *dev_type_p = PCICC;
- return 0;
- }
-
- return -1;
-}
-
-/**
- * Try the selected number, then the selected type (can be ANYDEV)
- */
-static inline int
-select_device(int *dev_type_p, int *device_nr_p, int bytelength)
-{
- int i, indx, devTp, low_count, low_indx;
- struct device_x *index_p;
- struct device *dev_ptr;
-
- PDEBUG("device type = %d, index = %d\n", *dev_type_p, *device_nr_p);
- if ((*device_nr_p >= 0) && (*device_nr_p < Z90CRYPT_NUM_DEVS)) {
- PDEBUG("trying index = %d\n", *device_nr_p);
- dev_ptr = z90crypt.device_p[*device_nr_p];
-
- if (dev_ptr &&
- (dev_ptr->dev_stat != DEV_GONE) &&
- (dev_ptr->disabled == 0) &&
- (dev_ptr->user_disabled == 0)) {
- PDEBUG("selected by number, index = %d\n",
- *device_nr_p);
- *dev_type_p = dev_ptr->dev_type;
- return *device_nr_p;
- }
- }
- *device_nr_p = -1;
- PDEBUG("trying type = %d\n", *dev_type_p);
- devTp = *dev_type_p;
- if (select_device_type(&devTp, bytelength) == -1) {
- PDEBUG("failed to select by type\n");
- return -1;
- }
- PDEBUG("selected type = %d\n", devTp);
- index_p = &z90crypt.hdware_info->type_x_addr[devTp];
- low_count = 0x0000FFFF;
- low_indx = -1;
- for (i = 0; i < z90crypt.hdware_info->type_mask[devTp].st_count; i++) {
- indx = index_p->device_index[i];
- dev_ptr = z90crypt.device_p[indx];
- if (dev_ptr &&
- (dev_ptr->dev_stat != DEV_GONE) &&
- (dev_ptr->disabled == 0) &&
- (dev_ptr->user_disabled == 0) &&
- (devTp == dev_ptr->dev_type) &&
- (low_count > dev_ptr->dev_caller_count)) {
- low_count = dev_ptr->dev_caller_count;
- low_indx = indx;
- }
- }
- *device_nr_p = low_indx;
- return low_indx;
-}
-
-static inline int
-send_to_crypto_device(struct work_element *we_p)
-{
- struct caller *caller_p;
- struct device *device_p;
- int dev_nr;
- int bytelen = ((struct ica_rsa_modexpo *)we_p->buffer)->inputdatalength;
-
- if (!we_p->requestptr)
- return SEN_FATAL_ERROR;
- caller_p = (struct caller *)we_p->requestptr;
- dev_nr = we_p->devindex;
- if (select_device(&we_p->devtype, &dev_nr, bytelen) == -1) {
- if (z90crypt.hdware_info->hdware_mask.st_count != 0)
- return SEN_RETRY;
- else
- return SEN_NOT_AVAIL;
- }
- we_p->devindex = dev_nr;
- device_p = z90crypt.device_p[dev_nr];
- if (!device_p)
- return SEN_NOT_AVAIL;
- if (device_p->dev_type != we_p->devtype)
- return SEN_RETRY;
- if (device_p->dev_caller_count >= device_p->dev_q_depth)
- return SEN_QUEUE_FULL;
- PDEBUG("device number prior to send: %d\n", dev_nr);
- switch (send_to_AP(dev_nr, z90crypt.cdx,
- caller_p->caller_dev_dep_req_l,
- caller_p->caller_dev_dep_req_p)) {
- case DEV_SEN_EXCEPTION:
- PRINTKC("Exception during send to device %d\n", dev_nr);
- z90crypt.terminating = 1;
- return SEN_FATAL_ERROR;
- case DEV_GONE:
- PRINTK("Device %d not available\n", dev_nr);
- remove_device(device_p);
- return SEN_NOT_AVAIL;
- case DEV_EMPTY:
- return SEN_NOT_AVAIL;
- case DEV_NO_WORK:
- return SEN_FATAL_ERROR;
- case DEV_BAD_MESSAGE:
- return SEN_USER_ERROR;
- case DEV_QUEUE_FULL:
- return SEN_QUEUE_FULL;
- default:
- case DEV_ONLINE:
- break;
- }
- list_add_tail(&(caller_p->caller_liste), &(device_p->dev_caller_list));
- device_p->dev_caller_count++;
- return 0;
-}
-
-/**
- * Send puts the user's work on one of two queues:
- * the pending queue if the send was successful
- * the request queue if the send failed because device full or busy
- */
-static inline int
-z90crypt_send(struct work_element *we_p, const char *buf)
-{
- int rv;
-
- PDEBUG("PID %d\n", PID());
-
- if (CHK_RDWRMASK(we_p->status[0]) != STAT_NOWORK) {
- PDEBUG("PID %d tried to send more work but has outstanding "
- "work.\n", PID());
- return -EWORKPEND;
- }
- we_p->devindex = -1; // Reset device number
- spin_lock_irq(&queuespinlock);
- rv = send_to_crypto_device(we_p);
- switch (rv) {
- case 0:
- we_p->requestsent = jiffies;
- we_p->audit[0] |= FP_SENT;
- list_add_tail(&we_p->liste, &pending_list);
- ++pendingq_count;
- we_p->audit[0] |= FP_PENDING;
- break;
- case SEN_BUSY:
- case SEN_QUEUE_FULL:
- rv = 0;
- we_p->devindex = -1; // any device will do
- we_p->requestsent = jiffies;
- list_add_tail(&we_p->liste, &request_list);
- ++requestq_count;
- we_p->audit[0] |= FP_REQUEST;
- break;
- case SEN_RETRY:
- rv = -ERESTARTSYS;
- break;
- case SEN_NOT_AVAIL:
- PRINTK("*** No devices available.\n");
- rv = we_p->retcode = -ENODEV;
- we_p->status[0] |= STAT_FAILED;
- break;
- case REC_OPERAND_INV:
- case REC_OPERAND_SIZE:
- case REC_EVEN_MOD:
- case REC_INVALID_PAD:
- rv = we_p->retcode = -EINVAL;
- we_p->status[0] |= STAT_FAILED;
- break;
- default:
- we_p->retcode = rv;
- we_p->status[0] |= STAT_FAILED;
- break;
- }
- if (rv != -ERESTARTSYS)
- SET_RDWRMASK(we_p->status[0], STAT_WRITTEN);
- spin_unlock_irq(&queuespinlock);
- if (rv == 0)
- tasklet_schedule(&reader_tasklet);
- return rv;
-}
-
-/**
- * process_results copies the user's work from kernel space.
- */
-static inline int
-z90crypt_process_results(struct work_element *we_p, char __user *buf)
-{
- int rv;
-
- PDEBUG("we_p %p (PID %d)\n", we_p, PID());
-
- LONG2DEVPTR(we_p->devindex)->dev_total_req_cnt++;
- SET_RDWRMASK(we_p->status[0], STAT_READPEND);
-
- rv = 0;
- if (!we_p->buffer) {
- PRINTK("we_p %p PID %d in STAT_READPEND: buffer NULL.\n",
- we_p, PID());
- rv = -ENOBUFF;
- }
-
- if (!rv)
- if ((rv = copy_to_user(buf, we_p->buffer, we_p->buff_size))) {
- PDEBUG("copy_to_user failed: rv = %d\n", rv);
- rv = -EFAULT;
- }
-
- if (!rv)
- rv = we_p->retcode;
- if (!rv)
- if (we_p->resp_buff_size
- && copy_to_user(we_p->resp_addr, we_p->resp_buff,
- we_p->resp_buff_size))
- rv = -EFAULT;
-
- SET_RDWRMASK(we_p->status[0], STAT_NOWORK);
- return rv;
-}
-
-static unsigned char NULL_psmid[8] =
-{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-/**
- * Used in device configuration functions
- */
-#define MAX_RESET 90
-
-/**
- * This is used only for PCICC support
- */
-static inline int
-is_PKCS11_padded(unsigned char *buffer, int length)
-{
- int i;
- if ((buffer[0] != 0x00) || (buffer[1] != 0x01))
- return 0;
- for (i = 2; i < length; i++)
- if (buffer[i] != 0xFF)
- break;
- if ((i < 10) || (i == length))
- return 0;
- if (buffer[i] != 0x00)
- return 0;
- return 1;
-}
-
-/**
- * This is used only for PCICC support
- */
-static inline int
-is_PKCS12_padded(unsigned char *buffer, int length)
-{
- int i;
- if ((buffer[0] != 0x00) || (buffer[1] != 0x02))
- return 0;
- for (i = 2; i < length; i++)
- if (buffer[i] == 0x00)
- break;
- if ((i < 10) || (i == length))
- return 0;
- if (buffer[i] != 0x00)
- return 0;
- return 1;
-}
-
-/**
- * builds struct caller and converts message from generic format to
- * device-dependent format
- * func is ICARSAMODEXPO or ICARSACRT
- * function is PCI_FUNC_KEY_ENCRYPT or PCI_FUNC_KEY_DECRYPT
- */
-static inline int
-build_caller(struct work_element *we_p, short function)
-{
- int rv;
- struct caller *caller_p = (struct caller *)we_p->requestptr;
-
- if ((we_p->devtype != PCICC) && (we_p->devtype != PCICA) &&
- (we_p->devtype != PCIXCC_MCL2) && (we_p->devtype != PCIXCC_MCL3) &&
- (we_p->devtype != CEX2C) && (we_p->devtype != CEX2A))
- return SEN_NOT_AVAIL;
-
- memcpy(caller_p->caller_id, we_p->caller_id,
- sizeof(caller_p->caller_id));
- caller_p->caller_dev_dep_req_p = caller_p->caller_dev_dep_req;
- caller_p->caller_dev_dep_req_l = MAX_RESPONSE_SIZE;
- caller_p->caller_buf_p = we_p->buffer;
- INIT_LIST_HEAD(&(caller_p->caller_liste));
-
- rv = convert_request(we_p->buffer, we_p->funccode, function,
- z90crypt.cdx, we_p->devtype,
- &caller_p->caller_dev_dep_req_l,
- caller_p->caller_dev_dep_req_p);
- if (rv) {
- if (rv == SEN_NOT_AVAIL)
- PDEBUG("request can't be processed on hdwr avail\n");
- else
- PRINTK("Error from convert_request: %d\n", rv);
- }
- else
- memcpy(&(caller_p->caller_dev_dep_req_p[4]), we_p->caller_id,8);
- return rv;
-}
-
-static inline void
-unbuild_caller(struct device *device_p, struct caller *caller_p)
-{
- if (!caller_p)
- return;
- if (caller_p->caller_liste.next && caller_p->caller_liste.prev)
- if (!list_empty(&caller_p->caller_liste)) {
- list_del_init(&caller_p->caller_liste);
- device_p->dev_caller_count--;
- }
- memset(caller_p->caller_id, 0, sizeof(caller_p->caller_id));
-}
-
-static inline int
-get_crypto_request_buffer(struct work_element *we_p)
-{
- struct ica_rsa_modexpo *mex_p;
- struct ica_rsa_modexpo_crt *crt_p;
- unsigned char *temp_buffer;
- short function;
- int rv;
-
- mex_p = (struct ica_rsa_modexpo *) we_p->buffer;
- crt_p = (struct ica_rsa_modexpo_crt *) we_p->buffer;
-
- PDEBUG("device type input = %d\n", we_p->devtype);
-
- if (z90crypt.terminating)
- return REC_NO_RESPONSE;
- if (memcmp(we_p->caller_id, NULL_psmid, 8) == 0) {
- PRINTK("psmid zeroes\n");
- return SEN_FATAL_ERROR;
- }
- if (!we_p->buffer) {
- PRINTK("buffer pointer NULL\n");
- return SEN_USER_ERROR;
- }
- if (!we_p->requestptr) {
- PRINTK("caller pointer NULL\n");
- return SEN_USER_ERROR;
- }
-
- if ((we_p->devtype != PCICA) && (we_p->devtype != PCICC) &&
- (we_p->devtype != PCIXCC_MCL2) && (we_p->devtype != PCIXCC_MCL3) &&
- (we_p->devtype != CEX2C) && (we_p->devtype != CEX2A) &&
- (we_p->devtype != ANYDEV)) {
- PRINTK("invalid device type\n");
- return SEN_USER_ERROR;
- }
-
- if ((mex_p->inputdatalength < 1) ||
- (mex_p->inputdatalength > MAX_MOD_SIZE)) {
- PRINTK("inputdatalength[%d] is not valid\n",
- mex_p->inputdatalength);
- return SEN_USER_ERROR;
- }
-
- if (mex_p->outputdatalength < mex_p->inputdatalength) {
- PRINTK("outputdatalength[%d] < inputdatalength[%d]\n",
- mex_p->outputdatalength, mex_p->inputdatalength);
- return SEN_USER_ERROR;
- }
-
- if (!mex_p->inputdata || !mex_p->outputdata) {
- PRINTK("inputdata[%p] or outputdata[%p] is NULL\n",
- mex_p->outputdata, mex_p->inputdata);
- return SEN_USER_ERROR;
- }
-
- /**
- * As long as outputdatalength is big enough, we can set the
- * outputdatalength equal to the inputdatalength, since that is the
- * number of bytes we will copy in any case
- */
- mex_p->outputdatalength = mex_p->inputdatalength;
-
- rv = 0;
- switch (we_p->funccode) {
- case ICARSAMODEXPO:
- if (!mex_p->b_key || !mex_p->n_modulus)
- rv = SEN_USER_ERROR;
- break;
- case ICARSACRT:
- if (!IS_EVEN(crt_p->inputdatalength)) {
- PRINTK("inputdatalength[%d] is odd, CRT form\n",
- crt_p->inputdatalength);
- rv = SEN_USER_ERROR;
- break;
- }
- if (!crt_p->bp_key ||
- !crt_p->bq_key ||
- !crt_p->np_prime ||
- !crt_p->nq_prime ||
- !crt_p->u_mult_inv) {
- PRINTK("CRT form, bad data: %p/%p/%p/%p/%p\n",
- crt_p->bp_key, crt_p->bq_key,
- crt_p->np_prime, crt_p->nq_prime,
- crt_p->u_mult_inv);
- rv = SEN_USER_ERROR;
- }
- break;
- default:
- PRINTK("bad func = %d\n", we_p->funccode);
- rv = SEN_USER_ERROR;
- break;
- }
- if (rv != 0)
- return rv;
-
- if (select_device_type(&we_p->devtype, mex_p->inputdatalength) < 0)
- return SEN_NOT_AVAIL;
-
- temp_buffer = (unsigned char *)we_p + sizeof(struct work_element) +
- sizeof(struct caller);
- if (copy_from_user(temp_buffer, mex_p->inputdata,
- mex_p->inputdatalength) != 0)
- return SEN_RELEASED;
-
- function = PCI_FUNC_KEY_ENCRYPT;
- switch (we_p->devtype) {
- /* PCICA and CEX2A do everything with a simple RSA mod-expo operation */
- case PCICA:
- case CEX2A:
- function = PCI_FUNC_KEY_ENCRYPT;
- break;
- /**
- * PCIXCC_MCL2 does all Mod-Expo form with a simple RSA mod-expo
- * operation, and all CRT forms with a PKCS-1.2 format decrypt.
- * PCIXCC_MCL3 and CEX2C do all Mod-Expo and CRT forms with a simple RSA
- * mod-expo operation
- */
- case PCIXCC_MCL2:
- if (we_p->funccode == ICARSAMODEXPO)
- function = PCI_FUNC_KEY_ENCRYPT;
- else
- function = PCI_FUNC_KEY_DECRYPT;
- break;
- case PCIXCC_MCL3:
- case CEX2C:
- if (we_p->funccode == ICARSAMODEXPO)
- function = PCI_FUNC_KEY_ENCRYPT;
- else
- function = PCI_FUNC_KEY_DECRYPT;
- break;
- /**
- * PCICC does everything as a PKCS-1.2 format request
- */
- case PCICC:
- /* PCICC cannot handle input that is is PKCS#1.1 padded */
- if (is_PKCS11_padded(temp_buffer, mex_p->inputdatalength)) {
- return SEN_NOT_AVAIL;
- }
- if (we_p->funccode == ICARSAMODEXPO) {
- if (is_PKCS12_padded(temp_buffer,
- mex_p->inputdatalength))
- function = PCI_FUNC_KEY_ENCRYPT;
- else
- function = PCI_FUNC_KEY_DECRYPT;
- } else
- /* all CRT forms are decrypts */
- function = PCI_FUNC_KEY_DECRYPT;
- break;
- }
- PDEBUG("function: %04x\n", function);
- rv = build_caller(we_p, function);
- PDEBUG("rv from build_caller = %d\n", rv);
- return rv;
-}
-
-static inline int
-z90crypt_prepare(struct work_element *we_p, unsigned int funccode,
- const char __user *buffer)
-{
- int rv;
-
- we_p->devindex = -1;
- if (funccode == ICARSAMODEXPO)
- we_p->buff_size = sizeof(struct ica_rsa_modexpo);
- else
- we_p->buff_size = sizeof(struct ica_rsa_modexpo_crt);
-
- if (copy_from_user(we_p->buffer, buffer, we_p->buff_size))
- return -EFAULT;
-
- we_p->audit[0] |= FP_COPYFROM;
- SET_RDWRMASK(we_p->status[0], STAT_WRITTEN);
- we_p->funccode = funccode;
- we_p->devtype = -1;
- we_p->audit[0] |= FP_BUFFREQ;
- rv = get_crypto_request_buffer(we_p);
- switch (rv) {
- case 0:
- we_p->audit[0] |= FP_BUFFGOT;
- break;
- case SEN_USER_ERROR:
- rv = -EINVAL;
- break;
- case SEN_QUEUE_FULL:
- rv = 0;
- break;
- case SEN_RELEASED:
- rv = -EFAULT;
- break;
- case REC_NO_RESPONSE:
- rv = -ENODEV;
- break;
- case SEN_NOT_AVAIL:
- case EGETBUFF:
- rv = -EGETBUFF;
- break;
- default:
- PRINTK("rv = %d\n", rv);
- rv = -EGETBUFF;
- break;
- }
- if (CHK_RDWRMASK(we_p->status[0]) == STAT_WRITTEN)
- SET_RDWRMASK(we_p->status[0], STAT_DEFAULT);
- return rv;
-}
-
-static inline void
-purge_work_element(struct work_element *we_p)
-{
- struct list_head *lptr;
-
- spin_lock_irq(&queuespinlock);
- list_for_each(lptr, &request_list) {
- if (lptr == &we_p->liste) {
- list_del_init(lptr);
- requestq_count--;
- break;
- }
- }
- list_for_each(lptr, &pending_list) {
- if (lptr == &we_p->liste) {
- list_del_init(lptr);
- pendingq_count--;
- break;
- }
- }
- spin_unlock_irq(&queuespinlock);
-}
-
-/**
- * Build the request and send it.
- */
-static inline int
-z90crypt_rsa(struct priv_data *private_data_p, pid_t pid,
- unsigned int cmd, unsigned long arg)
-{
- struct work_element *we_p;
- int rv;
-
- if ((rv = allocate_work_element(&we_p, private_data_p, pid))) {
- PDEBUG("PID %d: allocate_work_element returned ENOMEM\n", pid);
- return rv;
- }
- if ((rv = z90crypt_prepare(we_p, cmd, (const char __user *)arg)))
- PDEBUG("PID %d: rv = %d from z90crypt_prepare\n", pid, rv);
- if (!rv)
- if ((rv = z90crypt_send(we_p, (const char *)arg)))
- PDEBUG("PID %d: rv %d from z90crypt_send.\n", pid, rv);
- if (!rv) {
- we_p->audit[0] |= FP_ASLEEP;
- wait_event(we_p->waitq, atomic_read(&we_p->alarmrung));
- we_p->audit[0] |= FP_AWAKE;
- rv = we_p->retcode;
- }
- if (!rv)
- rv = z90crypt_process_results(we_p, (char __user *)arg);
-
- if ((we_p->status[0] & STAT_FAILED)) {
- switch (rv) {
- /**
- * EINVAL *after* receive is almost always a padding error or
- * length error issued by a coprocessor (not an accelerator).
- * We convert this return value to -EGETBUFF which should
- * trigger a fallback to software.
- */
- case -EINVAL:
- if ((we_p->devtype != PCICA) &&
- (we_p->devtype != CEX2A))
- rv = -EGETBUFF;
- break;
- case -ETIMEOUT:
- if (z90crypt.mask.st_count > 0)
- rv = -ERESTARTSYS; // retry with another
- else
- rv = -ENODEV; // no cards left
- /* fall through to clean up request queue */
- case -ERESTARTSYS:
- case -ERELEASED:
- switch (CHK_RDWRMASK(we_p->status[0])) {
- case STAT_WRITTEN:
- purge_work_element(we_p);
- break;
- case STAT_READPEND:
- case STAT_NOWORK:
- default:
- break;
- }
- break;
- default:
- we_p->status[0] ^= STAT_FAILED;
- break;
- }
- }
- free_page((long)we_p);
- return rv;
-}
-
-/**
- * This function is a little long, but it's really just one large switch
- * statement.
- */
-static long
-z90crypt_unlocked_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- struct priv_data *private_data_p = filp->private_data;
- unsigned char *status;
- unsigned char *qdepth;
- unsigned int *reqcnt;
- struct ica_z90_status *pstat;
- int ret, i, loopLim, tempstat;
- static int deprecated_msg_count1 = 0;
- static int deprecated_msg_count2 = 0;
-
- PDEBUG("filp %p (PID %d), cmd 0x%08X\n", filp, PID(), cmd);
- PDEBUG("cmd 0x%08X: dir %s, size 0x%04X, type 0x%02X, nr 0x%02X\n",
- cmd,
- !_IOC_DIR(cmd) ? "NO"
- : ((_IOC_DIR(cmd) == (_IOC_READ|_IOC_WRITE)) ? "RW"
- : ((_IOC_DIR(cmd) == _IOC_READ) ? "RD"
- : "WR")),
- _IOC_SIZE(cmd), _IOC_TYPE(cmd), _IOC_NR(cmd));
-
- if (_IOC_TYPE(cmd) != Z90_IOCTL_MAGIC) {
- PRINTK("cmd 0x%08X contains bad magic\n", cmd);
- return -ENOTTY;
- }
-
- ret = 0;
- switch (cmd) {
- case ICARSAMODEXPO:
- case ICARSACRT:
- if (quiesce_z90crypt) {
- ret = -EQUIESCE;
- break;
- }
- ret = -ENODEV; // Default if no devices
- loopLim = z90crypt.hdware_info->hdware_mask.st_count -
- (z90crypt.hdware_info->hdware_mask.disabled_count +
- z90crypt.hdware_info->hdware_mask.user_disabled_count);
- for (i = 0; i < loopLim; i++) {
- ret = z90crypt_rsa(private_data_p, PID(), cmd, arg);
- if (ret != -ERESTARTSYS)
- break;
- }
- if (ret == -ERESTARTSYS)
- ret = -ENODEV;
- break;
-
- case Z90STAT_TOTALCOUNT:
- tempstat = get_status_totalcount();
- if (copy_to_user((int __user *)arg, &tempstat,sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_PCICACOUNT:
- tempstat = get_status_PCICAcount();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_PCICCCOUNT:
- tempstat = get_status_PCICCcount();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_PCIXCCMCL2COUNT:
- tempstat = get_status_PCIXCCMCL2count();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_PCIXCCMCL3COUNT:
- tempstat = get_status_PCIXCCMCL3count();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_CEX2CCOUNT:
- tempstat = get_status_CEX2Ccount();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_CEX2ACOUNT:
- tempstat = get_status_CEX2Acount();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_REQUESTQ_COUNT:
- tempstat = get_status_requestq_count();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_PENDINGQ_COUNT:
- tempstat = get_status_pendingq_count();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_TOTALOPEN_COUNT:
- tempstat = get_status_totalopen_count();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_DOMAIN_INDEX:
- tempstat = get_status_domain_index();
- if (copy_to_user((int __user *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90STAT_STATUS_MASK:
- status = kmalloc(Z90CRYPT_NUM_APS, GFP_KERNEL);
- if (!status) {
- PRINTK("kmalloc for status failed!\n");
- ret = -ENOMEM;
- break;
- }
- get_status_status_mask(status);
- if (copy_to_user((char __user *) arg, status, Z90CRYPT_NUM_APS)
- != 0)
- ret = -EFAULT;
- kfree(status);
- break;
-
- case Z90STAT_QDEPTH_MASK:
- qdepth = kmalloc(Z90CRYPT_NUM_APS, GFP_KERNEL);
- if (!qdepth) {
- PRINTK("kmalloc for qdepth failed!\n");
- ret = -ENOMEM;
- break;
- }
- get_status_qdepth_mask(qdepth);
- if (copy_to_user((char __user *) arg, qdepth, Z90CRYPT_NUM_APS) != 0)
- ret = -EFAULT;
- kfree(qdepth);
- break;
-
- case Z90STAT_PERDEV_REQCNT:
- reqcnt = kmalloc(sizeof(int) * Z90CRYPT_NUM_APS, GFP_KERNEL);
- if (!reqcnt) {
- PRINTK("kmalloc for reqcnt failed!\n");
- ret = -ENOMEM;
- break;
- }
- get_status_perdevice_reqcnt(reqcnt);
- if (copy_to_user((char __user *) arg, reqcnt,
- Z90CRYPT_NUM_APS * sizeof(int)) != 0)
- ret = -EFAULT;
- kfree(reqcnt);
- break;
-
- /* THIS IS DEPRECATED. USE THE NEW STATUS CALLS */
- case ICAZ90STATUS:
- if (deprecated_msg_count1 < 20) {
- PRINTK("deprecated call to ioctl (ICAZ90STATUS)!\n");
- deprecated_msg_count1++;
- if (deprecated_msg_count1 == 20)
- PRINTK("No longer issuing messages related to "
- "deprecated call to ICAZ90STATUS.\n");
- }
-
- pstat = kmalloc(sizeof(struct ica_z90_status), GFP_KERNEL);
- if (!pstat) {
- PRINTK("kmalloc for pstat failed!\n");
- ret = -ENOMEM;
- break;
- }
-
- pstat->totalcount = get_status_totalcount();
- pstat->leedslitecount = get_status_PCICAcount();
- pstat->leeds2count = get_status_PCICCcount();
- pstat->requestqWaitCount = get_status_requestq_count();
- pstat->pendingqWaitCount = get_status_pendingq_count();
- pstat->totalOpenCount = get_status_totalopen_count();
- pstat->cryptoDomain = get_status_domain_index();
- get_status_status_mask(pstat->status);
- get_status_qdepth_mask(pstat->qdepth);
-
- if (copy_to_user((struct ica_z90_status __user *) arg, pstat,
- sizeof(struct ica_z90_status)) != 0)
- ret = -EFAULT;
- kfree(pstat);
- break;
-
- /* THIS IS DEPRECATED. USE THE NEW STATUS CALLS */
- case Z90STAT_PCIXCCCOUNT:
- if (deprecated_msg_count2 < 20) {
- PRINTK("deprecated ioctl (Z90STAT_PCIXCCCOUNT)!\n");
- deprecated_msg_count2++;
- if (deprecated_msg_count2 == 20)
- PRINTK("No longer issuing messages about depre"
- "cated ioctl Z90STAT_PCIXCCCOUNT.\n");
- }
-
- tempstat = get_status_PCIXCCcount();
- if (copy_to_user((int *)arg, &tempstat, sizeof(int)) != 0)
- ret = -EFAULT;
- break;
-
- case Z90QUIESCE:
- if (current->euid != 0) {
- PRINTK("QUIESCE fails: euid %d\n",
- current->euid);
- ret = -EACCES;
- } else {
- PRINTK("QUIESCE device from PID %d\n", PID());
- quiesce_z90crypt = 1;
- }
- break;
-
- default:
- /* user passed an invalid IOCTL number */
- PDEBUG("cmd 0x%08X contains invalid ioctl code\n", cmd);
- ret = -ENOTTY;
- break;
- }
-
- return ret;
-}
-
-static inline int
-sprintcl(unsigned char *outaddr, unsigned char *addr, unsigned int len)
-{
- int hl, i;
-
- hl = 0;
- for (i = 0; i < len; i++)
- hl += sprintf(outaddr+hl, "%01x", (unsigned int) addr[i]);
- hl += sprintf(outaddr+hl, " ");
-
- return hl;
-}
-
-static inline int
-sprintrw(unsigned char *outaddr, unsigned char *addr, unsigned int len)
-{
- int hl, inl, c, cx;
-
- hl = sprintf(outaddr, " ");
- inl = 0;
- for (c = 0; c < (len / 16); c++) {
- hl += sprintcl(outaddr+hl, addr+inl, 16);
- inl += 16;
- }
-
- cx = len%16;
- if (cx) {
- hl += sprintcl(outaddr+hl, addr+inl, cx);
- inl += cx;
- }
-
- hl += sprintf(outaddr+hl, "\n");
-
- return hl;
-}
-
-static inline int
-sprinthx(unsigned char *title, unsigned char *outaddr,
- unsigned char *addr, unsigned int len)
-{
- int hl, inl, r, rx;
-
- hl = sprintf(outaddr, "\n%s\n", title);
- inl = 0;
- for (r = 0; r < (len / 64); r++) {
- hl += sprintrw(outaddr+hl, addr+inl, 64);
- inl += 64;
- }
- rx = len % 64;
- if (rx) {
- hl += sprintrw(outaddr+hl, addr+inl, rx);
- inl += rx;
- }
-
- hl += sprintf(outaddr+hl, "\n");
-
- return hl;
-}
-
-static inline int
-sprinthx4(unsigned char *title, unsigned char *outaddr,
- unsigned int *array, unsigned int len)
-{
- int hl, r;
-
- hl = sprintf(outaddr, "\n%s\n", title);
-
- for (r = 0; r < len; r++) {
- if ((r % 8) == 0)
- hl += sprintf(outaddr+hl, " ");
- hl += sprintf(outaddr+hl, "%08X ", array[r]);
- if ((r % 8) == 7)
- hl += sprintf(outaddr+hl, "\n");
- }
-
- hl += sprintf(outaddr+hl, "\n");
-
- return hl;
-}
-
-static int
-z90crypt_status(char *resp_buff, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- unsigned char *workarea;
- int len;
-
- /* resp_buff is a page. Use the right half for a work area */
- workarea = resp_buff+2000;
- len = 0;
- len += sprintf(resp_buff+len, "\nz90crypt version: %d.%d.%d\n",
- z90crypt_VERSION, z90crypt_RELEASE, z90crypt_VARIANT);
- len += sprintf(resp_buff+len, "Cryptographic domain: %d\n",
- get_status_domain_index());
- len += sprintf(resp_buff+len, "Total device count: %d\n",
- get_status_totalcount());
- len += sprintf(resp_buff+len, "PCICA count: %d\n",
- get_status_PCICAcount());
- len += sprintf(resp_buff+len, "PCICC count: %d\n",
- get_status_PCICCcount());
- len += sprintf(resp_buff+len, "PCIXCC MCL2 count: %d\n",
- get_status_PCIXCCMCL2count());
- len += sprintf(resp_buff+len, "PCIXCC MCL3 count: %d\n",
- get_status_PCIXCCMCL3count());
- len += sprintf(resp_buff+len, "CEX2C count: %d\n",
- get_status_CEX2Ccount());
- len += sprintf(resp_buff+len, "CEX2A count: %d\n",
- get_status_CEX2Acount());
- len += sprintf(resp_buff+len, "requestq count: %d\n",
- get_status_requestq_count());
- len += sprintf(resp_buff+len, "pendingq count: %d\n",
- get_status_pendingq_count());
- len += sprintf(resp_buff+len, "Total open handles: %d\n\n",
- get_status_totalopen_count());
- len += sprinthx(
- "Online devices: 1=PCICA 2=PCICC 3=PCIXCC(MCL2) "
- "4=PCIXCC(MCL3) 5=CEX2C 6=CEX2A",
- resp_buff+len,
- get_status_status_mask(workarea),
- Z90CRYPT_NUM_APS);
- len += sprinthx("Waiting work element counts",
- resp_buff+len,
- get_status_qdepth_mask(workarea),
- Z90CRYPT_NUM_APS);
- len += sprinthx4(
- "Per-device successfully completed request counts",
- resp_buff+len,
- get_status_perdevice_reqcnt((unsigned int *)workarea),
- Z90CRYPT_NUM_APS);
- *eof = 1;
- memset(workarea, 0, Z90CRYPT_NUM_APS * sizeof(unsigned int));
- return len;
-}
-
-static inline void
-disable_card(int card_index)
-{
- struct device *devp;
-
- devp = LONG2DEVPTR(card_index);
- if (!devp || devp->user_disabled)
- return;
- devp->user_disabled = 1;
- z90crypt.hdware_info->hdware_mask.user_disabled_count++;
- if (devp->dev_type == -1)
- return;
- z90crypt.hdware_info->type_mask[devp->dev_type].user_disabled_count++;
-}
-
-static inline void
-enable_card(int card_index)
-{
- struct device *devp;
-
- devp = LONG2DEVPTR(card_index);
- if (!devp || !devp->user_disabled)
- return;
- devp->user_disabled = 0;
- z90crypt.hdware_info->hdware_mask.user_disabled_count--;
- if (devp->dev_type == -1)
- return;
- z90crypt.hdware_info->type_mask[devp->dev_type].user_disabled_count--;
-}
-
-static int
-z90crypt_status_write(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- int j, eol;
- unsigned char *lbuf, *ptr;
- unsigned int local_count;
-
-#define LBUFSIZE 1200
- lbuf = kmalloc(LBUFSIZE, GFP_KERNEL);
- if (!lbuf) {
- PRINTK("kmalloc failed!\n");
- return 0;
- }
-
- if (count <= 0)
- return 0;
-
- local_count = UMIN((unsigned int)count, LBUFSIZE-1);
-
- if (copy_from_user(lbuf, buffer, local_count) != 0) {
- kfree(lbuf);
- return -EFAULT;
- }
-
- lbuf[local_count] = '\0';
-
- ptr = strstr(lbuf, "Online devices");
- if (ptr == 0) {
- PRINTK("Unable to parse data (missing \"Online devices\")\n");
- kfree(lbuf);
- return count;
- }
-
- ptr = strstr(ptr, "\n");
- if (ptr == 0) {
- PRINTK("Unable to parse data (missing newline after \"Online devices\")\n");
- kfree(lbuf);
- return count;
- }
- ptr++;
-
- if (strstr(ptr, "Waiting work element counts") == NULL) {
- PRINTK("Unable to parse data (missing \"Waiting work element counts\")\n");
- kfree(lbuf);
- return count;
- }
-
- j = 0;
- eol = 0;
- while ((j < 64) && (*ptr != '\0')) {
- switch (*ptr) {
- case '\t':
- case ' ':
- break;
- case '\n':
- default:
- eol = 1;
- break;
- case '0': // no device
- case '1': // PCICA
- case '2': // PCICC
- case '3': // PCIXCC_MCL2
- case '4': // PCIXCC_MCL3
- case '5': // CEX2C
- case '6': // CEX2A
- j++;
- break;
- case 'd':
- case 'D':
- disable_card(j);
- j++;
- break;
- case 'e':
- case 'E':
- enable_card(j);
- j++;
- break;
- }
- if (eol)
- break;
- ptr++;
- }
-
- kfree(lbuf);
- return count;
-}
-
-/**
- * Functions that run under a timer, with no process id
- *
- * The task functions:
- * z90crypt_reader_task
- * helper_send_work
- * helper_handle_work_element
- * helper_receive_rc
- * z90crypt_config_task
- * z90crypt_cleanup_task
- *
- * Helper functions:
- * z90crypt_schedule_reader_timer
- * z90crypt_schedule_reader_task
- * z90crypt_schedule_config_task
- * z90crypt_schedule_cleanup_task
- */
-static inline int
-receive_from_crypto_device(int index, unsigned char *psmid, int *buff_len_p,
- unsigned char *buff, unsigned char __user **dest_p_p)
-{
- int dv, rv;
- struct device *dev_ptr;
- struct caller *caller_p;
- struct ica_rsa_modexpo *icaMsg_p;
- struct list_head *ptr, *tptr;
-
- memcpy(psmid, NULL_psmid, sizeof(NULL_psmid));
-
- if (z90crypt.terminating)
- return REC_FATAL_ERROR;
-
- caller_p = 0;
- dev_ptr = z90crypt.device_p[index];
- rv = 0;
- do {
- if (!dev_ptr || dev_ptr->disabled) {
- rv = REC_NO_WORK; // a disabled device can't return work
- break;
- }
- if (dev_ptr->dev_self_x != index) {
- PRINTKC("Corrupt dev ptr\n");
- z90crypt.terminating = 1;
- rv = REC_FATAL_ERROR;
- break;
- }
- if (!dev_ptr->dev_resp_l || !dev_ptr->dev_resp_p) {
- dv = DEV_REC_EXCEPTION;
- PRINTK("dev_resp_l = %d, dev_resp_p = %p\n",
- dev_ptr->dev_resp_l, dev_ptr->dev_resp_p);
- } else {
- PDEBUG("Dequeue called for device %d\n", index);
- dv = receive_from_AP(index, z90crypt.cdx,
- dev_ptr->dev_resp_l,
- dev_ptr->dev_resp_p, psmid);
- }
- switch (dv) {
- case DEV_REC_EXCEPTION:
- rv = REC_FATAL_ERROR;
- z90crypt.terminating = 1;
- PRINTKC("Exception in receive from device %d\n",
- index);
- break;
- case DEV_ONLINE:
- rv = 0;
- break;
- case DEV_EMPTY:
- rv = REC_EMPTY;
- break;
- case DEV_NO_WORK:
- rv = REC_NO_WORK;
- break;
- case DEV_BAD_MESSAGE:
- case DEV_GONE:
- case REC_HARDWAR_ERR:
- default:
- rv = REC_NO_RESPONSE;
- break;
- }
- if (rv)
- break;
- if (dev_ptr->dev_caller_count <= 0) {
- rv = REC_USER_GONE;
- break;
- }
-
- list_for_each_safe(ptr, tptr, &dev_ptr->dev_caller_list) {
- caller_p = list_entry(ptr, struct caller, caller_liste);
- if (!memcmp(caller_p->caller_id, psmid,
- sizeof(caller_p->caller_id))) {
- if (!list_empty(&caller_p->caller_liste)) {
- list_del_init(ptr);
- dev_ptr->dev_caller_count--;
- break;
- }
- }
- caller_p = 0;
- }
- if (!caller_p) {
- PRINTKW("Unable to locate PSMID %02X%02X%02X%02X%02X"
- "%02X%02X%02X in device list\n",
- psmid[0], psmid[1], psmid[2], psmid[3],
- psmid[4], psmid[5], psmid[6], psmid[7]);
- rv = REC_USER_GONE;
- break;
- }
-
- PDEBUG("caller_p after successful receive: %p\n", caller_p);
- rv = convert_response(dev_ptr->dev_resp_p,
- caller_p->caller_buf_p, buff_len_p, buff);
- switch (rv) {
- case REC_USE_PCICA:
- break;
- case REC_OPERAND_INV:
- case REC_OPERAND_SIZE:
- case REC_EVEN_MOD:
- case REC_INVALID_PAD:
- PDEBUG("device %d: 'user error' %d\n", index, rv);
- break;
- case WRONG_DEVICE_TYPE:
- case REC_HARDWAR_ERR:
- case REC_BAD_MESSAGE:
- PRINTKW("device %d: hardware error %d\n", index, rv);
- rv = REC_NO_RESPONSE;
- break;
- default:
- PDEBUG("device %d: rv = %d\n", index, rv);
- break;
- }
- } while (0);
-
- switch (rv) {
- case 0:
- PDEBUG("Successful receive from device %d\n", index);
- icaMsg_p = (struct ica_rsa_modexpo *)caller_p->caller_buf_p;
- *dest_p_p = icaMsg_p->outputdata;
- if (*buff_len_p == 0)
- PRINTK("Zero *buff_len_p\n");
- break;
- case REC_NO_RESPONSE:
- PRINTKW("Removing device %d from availability\n", index);
- remove_device(dev_ptr);
- break;
- }
-
- if (caller_p)
- unbuild_caller(dev_ptr, caller_p);
-
- return rv;
-}
-
-static inline void
-helper_send_work(int index)
-{
- struct work_element *rq_p;
- int rv;
-
- if (list_empty(&request_list))
- return;
- requestq_count--;
- rq_p = list_entry(request_list.next, struct work_element, liste);
- list_del_init(&rq_p->liste);
- rq_p->audit[1] |= FP_REMREQUEST;
- if (rq_p->devtype == SHRT2DEVPTR(index)->dev_type) {
- rq_p->devindex = SHRT2LONG(index);
- rv = send_to_crypto_device(rq_p);
- if (rv == 0) {
- rq_p->requestsent = jiffies;
- rq_p->audit[0] |= FP_SENT;
- list_add_tail(&rq_p->liste, &pending_list);
- ++pendingq_count;
- rq_p->audit[0] |= FP_PENDING;
- } else {
- switch (rv) {
- case REC_OPERAND_INV:
- case REC_OPERAND_SIZE:
- case REC_EVEN_MOD:
- case REC_INVALID_PAD:
- rq_p->retcode = -EINVAL;
- break;
- case SEN_NOT_AVAIL:
- case SEN_RETRY:
- case REC_NO_RESPONSE:
- default:
- if (z90crypt.mask.st_count > 1)
- rq_p->retcode =
- -ERESTARTSYS;
- else
- rq_p->retcode = -ENODEV;
- break;
- }
- rq_p->status[0] |= STAT_FAILED;
- rq_p->audit[1] |= FP_AWAKENING;
- atomic_set(&rq_p->alarmrung, 1);
- wake_up(&rq_p->waitq);
- }
- } else {
- if (z90crypt.mask.st_count > 1)
- rq_p->retcode = -ERESTARTSYS;
- else
- rq_p->retcode = -ENODEV;
- rq_p->status[0] |= STAT_FAILED;
- rq_p->audit[1] |= FP_AWAKENING;
- atomic_set(&rq_p->alarmrung, 1);
- wake_up(&rq_p->waitq);
- }
-}
-
-static inline void
-helper_handle_work_element(int index, unsigned char psmid[8], int rc,
- int buff_len, unsigned char *buff,
- unsigned char __user *resp_addr)
-{
- struct work_element *pq_p;
- struct list_head *lptr, *tptr;
-
- pq_p = 0;
- list_for_each_safe(lptr, tptr, &pending_list) {
- pq_p = list_entry(lptr, struct work_element, liste);
- if (!memcmp(pq_p->caller_id, psmid, sizeof(pq_p->caller_id))) {
- list_del_init(lptr);
- pendingq_count--;
- pq_p->audit[1] |= FP_NOTPENDING;
- break;
- }
- pq_p = 0;
- }
-
- if (!pq_p) {
- PRINTK("device %d has work but no caller exists on pending Q\n",
- SHRT2LONG(index));
- return;
- }
-
- switch (rc) {
- case 0:
- pq_p->resp_buff_size = buff_len;
- pq_p->audit[1] |= FP_RESPSIZESET;
- if (buff_len) {
- pq_p->resp_addr = resp_addr;
- pq_p->audit[1] |= FP_RESPADDRCOPIED;
- memcpy(pq_p->resp_buff, buff, buff_len);
- pq_p->audit[1] |= FP_RESPBUFFCOPIED;
- }
- break;
- case REC_OPERAND_INV:
- case REC_OPERAND_SIZE:
- case REC_EVEN_MOD:
- case REC_INVALID_PAD:
- PDEBUG("-EINVAL after application error %d\n", rc);
- pq_p->retcode = -EINVAL;
- pq_p->status[0] |= STAT_FAILED;
- break;
- case REC_USE_PCICA:
- pq_p->retcode = -ERESTARTSYS;
- pq_p->status[0] |= STAT_FAILED;
- break;
- case REC_NO_RESPONSE:
- default:
- if (z90crypt.mask.st_count > 1)
- pq_p->retcode = -ERESTARTSYS;
- else
- pq_p->retcode = -ENODEV;
- pq_p->status[0] |= STAT_FAILED;
- break;
- }
- if ((pq_p->status[0] != STAT_FAILED) || (pq_p->retcode != -ERELEASED)) {
- pq_p->audit[1] |= FP_AWAKENING;
- atomic_set(&pq_p->alarmrung, 1);
- wake_up(&pq_p->waitq);
- }
-}
-
-/**
- * return TRUE if the work element should be removed from the queue
- */
-static inline int
-helper_receive_rc(int index, int *rc_p)
-{
- switch (*rc_p) {
- case 0:
- case REC_OPERAND_INV:
- case REC_OPERAND_SIZE:
- case REC_EVEN_MOD:
- case REC_INVALID_PAD:
- case REC_USE_PCICA:
- break;
-
- case REC_BUSY:
- case REC_NO_WORK:
- case REC_EMPTY:
- case REC_RETRY_DEV:
- case REC_FATAL_ERROR:
- return 0;
-
- case REC_NO_RESPONSE:
- break;
-
- default:
- PRINTK("rc %d, device %d converted to REC_NO_RESPONSE\n",
- *rc_p, SHRT2LONG(index));
- *rc_p = REC_NO_RESPONSE;
- break;
- }
- return 1;
-}
-
-static inline void
-z90crypt_schedule_reader_timer(void)
-{
- if (timer_pending(&reader_timer))
- return;
- if (mod_timer(&reader_timer, jiffies+(READERTIME*HZ/1000)) != 0)
- PRINTK("Timer pending while modifying reader timer\n");
-}
-
-static void
-z90crypt_reader_task(unsigned long ptr)
-{
- int workavail, index, rc, buff_len;
- unsigned char psmid[8];
- unsigned char __user *resp_addr;
- static unsigned char buff[1024];
-
- /**
- * we use workavail = 2 to ensure 2 passes with nothing dequeued before
- * exiting the loop. If (pendingq_count+requestq_count) == 0 after the
- * loop, there is no work remaining on the queues.
- */
- resp_addr = 0;
- workavail = 2;
- buff_len = 0;
- while (workavail) {
- workavail--;
- rc = 0;
- spin_lock_irq(&queuespinlock);
- memset(buff, 0x00, sizeof(buff));
-
- /* Dequeue once from each device in round robin. */
- for (index = 0; index < z90crypt.mask.st_count; index++) {
- PDEBUG("About to receive.\n");
- rc = receive_from_crypto_device(SHRT2LONG(index),
- psmid,
- &buff_len,
- buff,
- &resp_addr);
- PDEBUG("Dequeued: rc = %d.\n", rc);
-
- if (helper_receive_rc(index, &rc)) {
- if (rc != REC_NO_RESPONSE) {
- helper_send_work(index);
- workavail = 2;
- }
-
- helper_handle_work_element(index, psmid, rc,
- buff_len, buff,
- resp_addr);
- }
-
- if (rc == REC_FATAL_ERROR)
- PRINTKW("REC_FATAL_ERROR from device %d!\n",
- SHRT2LONG(index));
- }
- spin_unlock_irq(&queuespinlock);
- }
-
- if (pendingq_count + requestq_count)
- z90crypt_schedule_reader_timer();
-}
-
-static inline void
-z90crypt_schedule_config_task(unsigned int expiration)
-{
- if (timer_pending(&config_timer))
- return;
- if (mod_timer(&config_timer, jiffies+(expiration*HZ)) != 0)
- PRINTK("Timer pending while modifying config timer\n");
-}
-
-static void
-z90crypt_config_task(unsigned long ptr)
-{
- int rc;
-
- PDEBUG("jiffies %ld\n", jiffies);
-
- if ((rc = refresh_z90crypt(&z90crypt.cdx)))
- PRINTK("Error %d detected in refresh_z90crypt.\n", rc);
- /* If return was fatal, don't bother reconfiguring */
- if ((rc != TSQ_FATAL_ERROR) && (rc != RSQ_FATAL_ERROR))
- z90crypt_schedule_config_task(CONFIGTIME);
-}
-
-static inline void
-z90crypt_schedule_cleanup_task(void)
-{
- if (timer_pending(&cleanup_timer))
- return;
- if (mod_timer(&cleanup_timer, jiffies+(CLEANUPTIME*HZ)) != 0)
- PRINTK("Timer pending while modifying cleanup timer\n");
-}
-
-static inline void
-helper_drain_queues(void)
-{
- struct work_element *pq_p;
- struct list_head *lptr, *tptr;
-
- list_for_each_safe(lptr, tptr, &pending_list) {
- pq_p = list_entry(lptr, struct work_element, liste);
- pq_p->retcode = -ENODEV;
- pq_p->status[0] |= STAT_FAILED;
- unbuild_caller(LONG2DEVPTR(pq_p->devindex),
- (struct caller *)pq_p->requestptr);
- list_del_init(lptr);
- pendingq_count--;
- pq_p->audit[1] |= FP_NOTPENDING;
- pq_p->audit[1] |= FP_AWAKENING;
- atomic_set(&pq_p->alarmrung, 1);
- wake_up(&pq_p->waitq);
- }
-
- list_for_each_safe(lptr, tptr, &request_list) {
- pq_p = list_entry(lptr, struct work_element, liste);
- pq_p->retcode = -ENODEV;
- pq_p->status[0] |= STAT_FAILED;
- list_del_init(lptr);
- requestq_count--;
- pq_p->audit[1] |= FP_REMREQUEST;
- pq_p->audit[1] |= FP_AWAKENING;
- atomic_set(&pq_p->alarmrung, 1);
- wake_up(&pq_p->waitq);
- }
-}
-
-static inline void
-helper_timeout_requests(void)
-{
- struct work_element *pq_p;
- struct list_head *lptr, *tptr;
- long timelimit;
-
- timelimit = jiffies - (CLEANUPTIME * HZ);
- /* The list is in strict chronological order */
- list_for_each_safe(lptr, tptr, &pending_list) {
- pq_p = list_entry(lptr, struct work_element, liste);
- if (pq_p->requestsent >= timelimit)
- break;
- PRINTKW("Purging(PQ) PSMID %02X%02X%02X%02X%02X%02X%02X%02X\n",
- ((struct caller *)pq_p->requestptr)->caller_id[0],
- ((struct caller *)pq_p->requestptr)->caller_id[1],
- ((struct caller *)pq_p->requestptr)->caller_id[2],
- ((struct caller *)pq_p->requestptr)->caller_id[3],
- ((struct caller *)pq_p->requestptr)->caller_id[4],
- ((struct caller *)pq_p->requestptr)->caller_id[5],
- ((struct caller *)pq_p->requestptr)->caller_id[6],
- ((struct caller *)pq_p->requestptr)->caller_id[7]);
- pq_p->retcode = -ETIMEOUT;
- pq_p->status[0] |= STAT_FAILED;
- /* get this off any caller queue it may be on */
- unbuild_caller(LONG2DEVPTR(pq_p->devindex),
- (struct caller *) pq_p->requestptr);
- list_del_init(lptr);
- pendingq_count--;
- pq_p->audit[1] |= FP_TIMEDOUT;
- pq_p->audit[1] |= FP_NOTPENDING;
- pq_p->audit[1] |= FP_AWAKENING;
- atomic_set(&pq_p->alarmrung, 1);
- wake_up(&pq_p->waitq);
- }
-
- /**
- * If pending count is zero, items left on the request queue may
- * never be processed.
- */
- if (pendingq_count <= 0) {
- list_for_each_safe(lptr, tptr, &request_list) {
- pq_p = list_entry(lptr, struct work_element, liste);
- if (pq_p->requestsent >= timelimit)
- break;
- PRINTKW("Purging(RQ) PSMID %02X%02X%02X%02X%02X%02X%02X%02X\n",
- ((struct caller *)pq_p->requestptr)->caller_id[0],
- ((struct caller *)pq_p->requestptr)->caller_id[1],
- ((struct caller *)pq_p->requestptr)->caller_id[2],
- ((struct caller *)pq_p->requestptr)->caller_id[3],
- ((struct caller *)pq_p->requestptr)->caller_id[4],
- ((struct caller *)pq_p->requestptr)->caller_id[5],
- ((struct caller *)pq_p->requestptr)->caller_id[6],
- ((struct caller *)pq_p->requestptr)->caller_id[7]);
- pq_p->retcode = -ETIMEOUT;
- pq_p->status[0] |= STAT_FAILED;
- list_del_init(lptr);
- requestq_count--;
- pq_p->audit[1] |= FP_TIMEDOUT;
- pq_p->audit[1] |= FP_REMREQUEST;
- pq_p->audit[1] |= FP_AWAKENING;
- atomic_set(&pq_p->alarmrung, 1);
- wake_up(&pq_p->waitq);
- }
- }
-}
-
-static void
-z90crypt_cleanup_task(unsigned long ptr)
-{
- PDEBUG("jiffies %ld\n", jiffies);
- spin_lock_irq(&queuespinlock);
- if (z90crypt.mask.st_count <= 0) // no devices!
- helper_drain_queues();
- else
- helper_timeout_requests();
- spin_unlock_irq(&queuespinlock);
- z90crypt_schedule_cleanup_task();
-}
-
-static void
-z90crypt_schedule_reader_task(unsigned long ptr)
-{
- tasklet_schedule(&reader_tasklet);
-}
-
-/**
- * Lowlevel Functions:
- *
- * create_z90crypt: creates and initializes basic data structures
- * refresh_z90crypt: re-initializes basic data structures
- * find_crypto_devices: returns a count and mask of hardware status
- * create_crypto_device: builds the descriptor for a device
- * destroy_crypto_device: unallocates the descriptor for a device
- * destroy_z90crypt: drains all work, unallocates structs
- */
-
-/**
- * build the z90crypt root structure using the given domain index
- */
-static int
-create_z90crypt(int *cdx_p)
-{
- struct hdware_block *hdware_blk_p;
-
- memset(&z90crypt, 0x00, sizeof(struct z90crypt));
- z90crypt.domain_established = 0;
- z90crypt.len = sizeof(struct z90crypt);
- z90crypt.max_count = Z90CRYPT_NUM_DEVS;
- z90crypt.cdx = *cdx_p;
-
- hdware_blk_p = kzalloc(sizeof(struct hdware_block), GFP_ATOMIC);
- if (!hdware_blk_p) {
- PDEBUG("kmalloc for hardware block failed\n");
- return ENOMEM;
- }
- z90crypt.hdware_info = hdware_blk_p;
-
- return 0;
-}
-
-static inline int
-helper_scan_devices(int cdx_array[16], int *cdx_p, int *correct_cdx_found)
-{
- enum hdstat hd_stat;
- int q_depth, dev_type;
- int indx, chkdom, numdomains;
-
- q_depth = dev_type = numdomains = 0;
- for (chkdom = 0; chkdom <= 15; cdx_array[chkdom++] = -1);
- for (indx = 0; indx < z90crypt.max_count; indx++) {
- hd_stat = HD_NOT_THERE;
- numdomains = 0;
- for (chkdom = 0; chkdom <= 15; chkdom++) {
- hd_stat = query_online(indx, chkdom, MAX_RESET,
- &q_depth, &dev_type);
- if (hd_stat == HD_TSQ_EXCEPTION) {
- z90crypt.terminating = 1;
- PRINTKC("exception taken!\n");
- break;
- }
- if (hd_stat == HD_ONLINE) {
- cdx_array[numdomains++] = chkdom;
- if (*cdx_p == chkdom) {
- *correct_cdx_found = 1;
- break;
- }
- }
- }
- if ((*correct_cdx_found == 1) || (numdomains != 0))
- break;
- if (z90crypt.terminating)
- break;
- }
- return numdomains;
-}
-
-static inline int
-probe_crypto_domain(int *cdx_p)
-{
- int cdx_array[16];
- char cdx_array_text[53], temp[5];
- int correct_cdx_found, numdomains;
-
- correct_cdx_found = 0;
- numdomains = helper_scan_devices(cdx_array, cdx_p, &correct_cdx_found);
-
- if (z90crypt.terminating)
- return TSQ_FATAL_ERROR;
-
- if (correct_cdx_found)
- return 0;
-
- if (numdomains == 0) {
- PRINTKW("Unable to find crypto domain: No devices found\n");
- return Z90C_NO_DEVICES;
- }
-
- if (numdomains == 1) {
- if (*cdx_p == -1) {
- *cdx_p = cdx_array[0];
- return 0;
- }
- PRINTKW("incorrect domain: specified = %d, found = %d\n",
- *cdx_p, cdx_array[0]);
- return Z90C_INCORRECT_DOMAIN;
- }
-
- numdomains--;
- sprintf(cdx_array_text, "%d", cdx_array[numdomains]);
- while (numdomains) {
- numdomains--;
- sprintf(temp, ", %d", cdx_array[numdomains]);
- strcat(cdx_array_text, temp);
- }
-
- PRINTKW("ambiguous domain detected: specified = %d, found array = %s\n",
- *cdx_p, cdx_array_text);
- return Z90C_AMBIGUOUS_DOMAIN;
-}
-
-static int
-refresh_z90crypt(int *cdx_p)
-{
- int i, j, indx, rv;
- static struct status local_mask;
- struct device *devPtr;
- unsigned char oldStat, newStat;
- int return_unchanged;
-
- if (z90crypt.len != sizeof(z90crypt))
- return ENOTINIT;
- if (z90crypt.terminating)
- return TSQ_FATAL_ERROR;
- rv = 0;
- if (!z90crypt.hdware_info->hdware_mask.st_count &&
- !z90crypt.domain_established) {
- rv = probe_crypto_domain(cdx_p);
- if (z90crypt.terminating)
- return TSQ_FATAL_ERROR;
- if (rv == Z90C_NO_DEVICES)
- return 0; // try later
- if (rv)
- return rv;
- z90crypt.cdx = *cdx_p;
- z90crypt.domain_established = 1;
- }
- rv = find_crypto_devices(&local_mask);
- if (rv) {
- PRINTK("find crypto devices returned %d\n", rv);
- return rv;
- }
- if (!memcmp(&local_mask, &z90crypt.hdware_info->hdware_mask,
- sizeof(struct status))) {
- return_unchanged = 1;
- for (i = 0; i < Z90CRYPT_NUM_TYPES; i++) {
- /**
- * Check for disabled cards. If any device is marked
- * disabled, destroy it.
- */
- for (j = 0;
- j < z90crypt.hdware_info->type_mask[i].st_count;
- j++) {
- indx = z90crypt.hdware_info->type_x_addr[i].
- device_index[j];
- devPtr = z90crypt.device_p[indx];
- if (devPtr && devPtr->disabled) {
- local_mask.st_mask[indx] = HD_NOT_THERE;
- return_unchanged = 0;
- }
- }
- }
- if (return_unchanged == 1)
- return 0;
- }
-
- spin_lock_irq(&queuespinlock);
- for (i = 0; i < z90crypt.max_count; i++) {
- oldStat = z90crypt.hdware_info->hdware_mask.st_mask[i];
- newStat = local_mask.st_mask[i];
- if ((oldStat == HD_ONLINE) && (newStat != HD_ONLINE))
- destroy_crypto_device(i);
- else if ((oldStat != HD_ONLINE) && (newStat == HD_ONLINE)) {
- rv = create_crypto_device(i);
- if (rv >= REC_FATAL_ERROR)
- return rv;
- if (rv != 0) {
- local_mask.st_mask[i] = HD_NOT_THERE;
- local_mask.st_count--;
- }
- }
- }
- memcpy(z90crypt.hdware_info->hdware_mask.st_mask, local_mask.st_mask,
- sizeof(local_mask.st_mask));
- z90crypt.hdware_info->hdware_mask.st_count = local_mask.st_count;
- z90crypt.hdware_info->hdware_mask.disabled_count =
- local_mask.disabled_count;
- refresh_index_array(&z90crypt.mask, &z90crypt.overall_device_x);
- for (i = 0; i < Z90CRYPT_NUM_TYPES; i++)
- refresh_index_array(&(z90crypt.hdware_info->type_mask[i]),
- &(z90crypt.hdware_info->type_x_addr[i]));
- spin_unlock_irq(&queuespinlock);
-
- return rv;
-}
-
-static int
-find_crypto_devices(struct status *deviceMask)
-{
- int i, q_depth, dev_type;
- enum hdstat hd_stat;
-
- deviceMask->st_count = 0;
- deviceMask->disabled_count = 0;
- deviceMask->user_disabled_count = 0;
-
- for (i = 0; i < z90crypt.max_count; i++) {
- hd_stat = query_online(i, z90crypt.cdx, MAX_RESET, &q_depth,
- &dev_type);
- if (hd_stat == HD_TSQ_EXCEPTION) {
- z90crypt.terminating = 1;
- PRINTKC("Exception during probe for crypto devices\n");
- return TSQ_FATAL_ERROR;
- }
- deviceMask->st_mask[i] = hd_stat;
- if (hd_stat == HD_ONLINE) {
- PDEBUG("Got an online crypto!: %d\n", i);
- PDEBUG("Got a queue depth of %d\n", q_depth);
- PDEBUG("Got a device type of %d\n", dev_type);
- if (q_depth <= 0)
- return TSQ_FATAL_ERROR;
- deviceMask->st_count++;
- z90crypt.q_depth_array[i] = q_depth;
- z90crypt.dev_type_array[i] = dev_type;
- }
- }
-
- return 0;
-}
-
-static int
-refresh_index_array(struct status *status_str, struct device_x *index_array)
-{
- int i, count;
- enum devstat stat;
-
- i = -1;
- count = 0;
- do {
- stat = status_str->st_mask[++i];
- if (stat == DEV_ONLINE)
- index_array->device_index[count++] = i;
- } while ((i < Z90CRYPT_NUM_DEVS) && (count < status_str->st_count));
-
- return count;
-}
-
-static int
-create_crypto_device(int index)
-{
- int rv, devstat, total_size;
- struct device *dev_ptr;
- struct status *type_str_p;
- int deviceType;
-
- dev_ptr = z90crypt.device_p[index];
- if (!dev_ptr) {
- total_size = sizeof(struct device) +
- z90crypt.q_depth_array[index] * sizeof(int);
-
- dev_ptr = kzalloc(total_size, GFP_ATOMIC);
- if (!dev_ptr) {
- PRINTK("kmalloc device %d failed\n", index);
- return ENOMEM;
- }
- dev_ptr->dev_resp_p = kmalloc(MAX_RESPONSE_SIZE, GFP_ATOMIC);
- if (!dev_ptr->dev_resp_p) {
- kfree(dev_ptr);
- PRINTK("kmalloc device %d rec buffer failed\n", index);
- return ENOMEM;
- }
- dev_ptr->dev_resp_l = MAX_RESPONSE_SIZE;
- INIT_LIST_HEAD(&(dev_ptr->dev_caller_list));
- }
-
- devstat = reset_device(index, z90crypt.cdx, MAX_RESET);
- if (devstat == DEV_RSQ_EXCEPTION) {
- PRINTK("exception during reset device %d\n", index);
- kfree(dev_ptr->dev_resp_p);
- kfree(dev_ptr);
- return RSQ_FATAL_ERROR;
- }
- if (devstat == DEV_ONLINE) {
- dev_ptr->dev_self_x = index;
- dev_ptr->dev_type = z90crypt.dev_type_array[index];
- if (dev_ptr->dev_type == NILDEV) {
- rv = probe_device_type(dev_ptr);
- if (rv) {
- PRINTK("rv = %d from probe_device_type %d\n",
- rv, index);
- kfree(dev_ptr->dev_resp_p);
- kfree(dev_ptr);
- return rv;
- }
- }
- if (dev_ptr->dev_type == PCIXCC_UNK) {
- rv = probe_PCIXCC_type(dev_ptr);
- if (rv) {
- PRINTK("rv = %d from probe_PCIXCC_type %d\n",
- rv, index);
- kfree(dev_ptr->dev_resp_p);
- kfree(dev_ptr);
- return rv;
- }
- }
- deviceType = dev_ptr->dev_type;
- z90crypt.dev_type_array[index] = deviceType;
- if (deviceType == PCICA)
- z90crypt.hdware_info->device_type_array[index] = 1;
- else if (deviceType == PCICC)
- z90crypt.hdware_info->device_type_array[index] = 2;
- else if (deviceType == PCIXCC_MCL2)
- z90crypt.hdware_info->device_type_array[index] = 3;
- else if (deviceType == PCIXCC_MCL3)
- z90crypt.hdware_info->device_type_array[index] = 4;
- else if (deviceType == CEX2C)
- z90crypt.hdware_info->device_type_array[index] = 5;
- else if (deviceType == CEX2A)
- z90crypt.hdware_info->device_type_array[index] = 6;
- else // No idea how this would happen.
- z90crypt.hdware_info->device_type_array[index] = -1;
- }
-
- /**
- * 'q_depth' returned by the hardware is one less than
- * the actual depth
- */
- dev_ptr->dev_q_depth = z90crypt.q_depth_array[index];
- dev_ptr->dev_type = z90crypt.dev_type_array[index];
- dev_ptr->dev_stat = devstat;
- dev_ptr->disabled = 0;
- z90crypt.device_p[index] = dev_ptr;
-
- if (devstat == DEV_ONLINE) {
- if (z90crypt.mask.st_mask[index] != DEV_ONLINE) {
- z90crypt.mask.st_mask[index] = DEV_ONLINE;
- z90crypt.mask.st_count++;
- }
- deviceType = dev_ptr->dev_type;
- type_str_p = &z90crypt.hdware_info->type_mask[deviceType];
- if (type_str_p->st_mask[index] != DEV_ONLINE) {
- type_str_p->st_mask[index] = DEV_ONLINE;
- type_str_p->st_count++;
- }
- }
-
- return 0;
-}
-
-static int
-destroy_crypto_device(int index)
-{
- struct device *dev_ptr;
- int t, disabledFlag;
-
- dev_ptr = z90crypt.device_p[index];
-
- /* remember device type; get rid of device struct */
- if (dev_ptr) {
- disabledFlag = dev_ptr->disabled;
- t = dev_ptr->dev_type;
- kfree(dev_ptr->dev_resp_p);
- kfree(dev_ptr);
- } else {
- disabledFlag = 0;
- t = -1;
- }
- z90crypt.device_p[index] = 0;
-
- /* if the type is valid, remove the device from the type_mask */
- if ((t != -1) && z90crypt.hdware_info->type_mask[t].st_mask[index]) {
- z90crypt.hdware_info->type_mask[t].st_mask[index] = 0x00;
- z90crypt.hdware_info->type_mask[t].st_count--;
- if (disabledFlag == 1)
- z90crypt.hdware_info->type_mask[t].disabled_count--;
- }
- if (z90crypt.mask.st_mask[index] != DEV_GONE) {
- z90crypt.mask.st_mask[index] = DEV_GONE;
- z90crypt.mask.st_count--;
- }
- z90crypt.hdware_info->device_type_array[index] = 0;
-
- return 0;
-}
-
-static void
-destroy_z90crypt(void)
-{
- int i;
-
- for (i = 0; i < z90crypt.max_count; i++)
- if (z90crypt.device_p[i])
- destroy_crypto_device(i);
- kfree(z90crypt.hdware_info);
- memset((void *)&z90crypt, 0, sizeof(z90crypt));
-}
-
-static unsigned char static_testmsg[384] = {
-0x00,0x00,0x00,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x00,0x06,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x58,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x43,0x43,
-0x41,0x2d,0x41,0x50,0x50,0x4c,0x20,0x20,0x20,0x01,0x01,0x01,0x00,0x00,0x00,0x00,
-0x50,0x4b,0x00,0x00,0x00,0x00,0x01,0x1c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x05,0xb8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x70,0x00,0x41,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x54,0x32,
-0x01,0x00,0xa0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0xb8,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x49,0x43,0x53,0x46,
-0x20,0x20,0x20,0x20,0x50,0x4b,0x0a,0x00,0x50,0x4b,0x43,0x53,0x2d,0x31,0x2e,0x32,
-0x37,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,
-0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
-0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66,
-0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x5d,0x00,0x5b,0x00,0x77,0x88,0x1e,0x00,0x00,
-0x57,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x4f,0x00,0x00,0x00,0x03,0x02,0x00,0x00,
-0x40,0x01,0x00,0x01,0xce,0x02,0x68,0x2d,0x5f,0xa9,0xde,0x0c,0xf6,0xd2,0x7b,0x58,
-0x4b,0xf9,0x28,0x68,0x3d,0xb4,0xf4,0xef,0x78,0xd5,0xbe,0x66,0x63,0x42,0xef,0xf8,
-0xfd,0xa4,0xf8,0xb0,0x8e,0x29,0xc2,0xc9,0x2e,0xd8,0x45,0xb8,0x53,0x8c,0x6f,0x4e,
-0x72,0x8f,0x6c,0x04,0x9c,0x88,0xfc,0x1e,0xc5,0x83,0x55,0x57,0xf7,0xdd,0xfd,0x4f,
-0x11,0x36,0x95,0x5d,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-};
-
-static int
-probe_device_type(struct device *devPtr)
-{
- int rv, dv, i, index, length;
- unsigned char psmid[8];
- static unsigned char loc_testmsg[sizeof(static_testmsg)];
-
- index = devPtr->dev_self_x;
- rv = 0;
- do {
- memcpy(loc_testmsg, static_testmsg, sizeof(static_testmsg));
- length = sizeof(static_testmsg) - 24;
- /* the -24 allows for the header */
- dv = send_to_AP(index, z90crypt.cdx, length, loc_testmsg);
- if (dv) {
- PDEBUG("dv returned by send during probe: %d\n", dv);
- if (dv == DEV_SEN_EXCEPTION) {
- rv = SEN_FATAL_ERROR;
- PRINTKC("exception in send to AP %d\n", index);
- break;
- }
- PDEBUG("return value from send_to_AP: %d\n", rv);
- switch (dv) {
- case DEV_GONE:
- PDEBUG("dev %d not available\n", index);
- rv = SEN_NOT_AVAIL;
- break;
- case DEV_ONLINE:
- rv = 0;
- break;
- case DEV_EMPTY:
- rv = SEN_NOT_AVAIL;
- break;
- case DEV_NO_WORK:
- rv = SEN_FATAL_ERROR;
- break;
- case DEV_BAD_MESSAGE:
- rv = SEN_USER_ERROR;
- break;
- case DEV_QUEUE_FULL:
- rv = SEN_QUEUE_FULL;
- break;
- default:
- PRINTK("unknown dv=%d for dev %d\n", dv, index);
- rv = SEN_NOT_AVAIL;
- break;
- }
- }
-
- if (rv)
- break;
-
- for (i = 0; i < 6; i++) {
- mdelay(300);
- dv = receive_from_AP(index, z90crypt.cdx,
- devPtr->dev_resp_l,
- devPtr->dev_resp_p, psmid);
- PDEBUG("dv returned by DQ = %d\n", dv);
- if (dv == DEV_REC_EXCEPTION) {
- rv = REC_FATAL_ERROR;
- PRINTKC("exception in dequeue %d\n",
- index);
- break;
- }
- switch (dv) {
- case DEV_ONLINE:
- rv = 0;
- break;
- case DEV_EMPTY:
- rv = REC_EMPTY;
- break;
- case DEV_NO_WORK:
- rv = REC_NO_WORK;
- break;
- case DEV_BAD_MESSAGE:
- case DEV_GONE:
- default:
- rv = REC_NO_RESPONSE;
- break;
- }
- if ((rv != 0) && (rv != REC_NO_WORK))
- break;
- if (rv == 0)
- break;
- }
- if (rv)
- break;
- rv = (devPtr->dev_resp_p[0] == 0x00) &&
- (devPtr->dev_resp_p[1] == 0x86);
- if (rv)
- devPtr->dev_type = PCICC;
- else
- devPtr->dev_type = PCICA;
- rv = 0;
- } while (0);
- /* In a general error case, the card is not marked online */
- return rv;
-}
-
-static unsigned char MCL3_testmsg[] = {
-0x00,0x00,0x00,0x00,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE,0xEE,
-0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x43,0x41,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x00,0x00,0x00,0x01,0xC4,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x24,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xDC,0x02,0x00,0x00,0x00,0x54,0x32,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE8,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x24,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x50,0x4B,0x00,0x0A,0x4D,0x52,0x50,0x20,0x20,0x20,0x20,0x20,
-0x00,0x42,0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07,0x08,0x09,0x0A,0x0B,0x0C,0x0D,
-0x0E,0x0F,0x00,0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,0x99,0xAA,0xBB,0xCC,0xDD,
-0xEE,0xFF,0xFF,0xEE,0xDD,0xCC,0xBB,0xAA,0x99,0x88,0x77,0x66,0x55,0x44,0x33,0x22,
-0x11,0x00,0x01,0x23,0x45,0x67,0x89,0xAB,0xCD,0xEF,0xFE,0xDC,0xBA,0x98,0x76,0x54,
-0x32,0x10,0x00,0x9A,0x00,0x98,0x00,0x00,0x1E,0x00,0x00,0x94,0x00,0x00,0x00,0x00,
-0x04,0x00,0x00,0x8C,0x00,0x00,0x00,0x40,0x02,0x00,0x00,0x40,0xBA,0xE8,0x23,0x3C,
-0x75,0xF3,0x91,0x61,0xD6,0x73,0x39,0xCF,0x7B,0x6D,0x8E,0x61,0x97,0x63,0x9E,0xD9,
-0x60,0x55,0xD6,0xC7,0xEF,0xF8,0x1E,0x63,0x95,0x17,0xCC,0x28,0x45,0x60,0x11,0xC5,
-0xC4,0x4E,0x66,0xC6,0xE6,0xC3,0xDE,0x8A,0x19,0x30,0xCF,0x0E,0xD7,0xAA,0xDB,0x01,
-0xD8,0x00,0xBB,0x8F,0x39,0x9F,0x64,0x28,0xF5,0x7A,0x77,0x49,0xCC,0x6B,0xA3,0x91,
-0x97,0x70,0xE7,0x60,0x1E,0x39,0xE1,0xE5,0x33,0xE1,0x15,0x63,0x69,0x08,0x80,0x4C,
-0x67,0xC4,0x41,0x8F,0x48,0xDF,0x26,0x98,0xF1,0xD5,0x8D,0x88,0xD9,0x6A,0xA4,0x96,
-0xC5,0x84,0xD9,0x30,0x49,0x67,0x7D,0x19,0xB1,0xB3,0x45,0x4D,0xB2,0x53,0x9A,0x47,
-0x3C,0x7C,0x55,0xBF,0xCC,0x85,0x00,0x36,0xF1,0x3D,0x93,0x53
-};
-
-static int
-probe_PCIXCC_type(struct device *devPtr)
-{
- int rv, dv, i, index, length;
- unsigned char psmid[8];
- static unsigned char loc_testmsg[548];
- struct CPRBX *cprbx_p;
-
- index = devPtr->dev_self_x;
- rv = 0;
- do {
- memcpy(loc_testmsg, MCL3_testmsg, sizeof(MCL3_testmsg));
- length = sizeof(MCL3_testmsg) - 0x0C;
- dv = send_to_AP(index, z90crypt.cdx, length, loc_testmsg);
- if (dv) {
- PDEBUG("dv returned = %d\n", dv);
- if (dv == DEV_SEN_EXCEPTION) {
- rv = SEN_FATAL_ERROR;
- PRINTKC("exception in send to AP %d\n", index);
- break;
- }
- PDEBUG("return value from send_to_AP: %d\n", rv);
- switch (dv) {
- case DEV_GONE:
- PDEBUG("dev %d not available\n", index);
- rv = SEN_NOT_AVAIL;
- break;
- case DEV_ONLINE:
- rv = 0;
- break;
- case DEV_EMPTY:
- rv = SEN_NOT_AVAIL;
- break;
- case DEV_NO_WORK:
- rv = SEN_FATAL_ERROR;
- break;
- case DEV_BAD_MESSAGE:
- rv = SEN_USER_ERROR;
- break;
- case DEV_QUEUE_FULL:
- rv = SEN_QUEUE_FULL;
- break;
- default:
- PRINTK("unknown dv=%d for dev %d\n", dv, index);
- rv = SEN_NOT_AVAIL;
- break;
- }
- }
-
- if (rv)
- break;
-
- for (i = 0; i < 6; i++) {
- mdelay(300);
- dv = receive_from_AP(index, z90crypt.cdx,
- devPtr->dev_resp_l,
- devPtr->dev_resp_p, psmid);
- PDEBUG("dv returned by DQ = %d\n", dv);
- if (dv == DEV_REC_EXCEPTION) {
- rv = REC_FATAL_ERROR;
- PRINTKC("exception in dequeue %d\n",
- index);
- break;
- }
- switch (dv) {
- case DEV_ONLINE:
- rv = 0;
- break;
- case DEV_EMPTY:
- rv = REC_EMPTY;
- break;
- case DEV_NO_WORK:
- rv = REC_NO_WORK;
- break;
- case DEV_BAD_MESSAGE:
- case DEV_GONE:
- default:
- rv = REC_NO_RESPONSE;
- break;
- }
- if ((rv != 0) && (rv != REC_NO_WORK))
- break;
- if (rv == 0)
- break;
- }
- if (rv)
- break;
- cprbx_p = (struct CPRBX *) (devPtr->dev_resp_p + 48);
- if ((cprbx_p->ccp_rtcode == 8) && (cprbx_p->ccp_rscode == 33)) {
- devPtr->dev_type = PCIXCC_MCL2;
- PDEBUG("device %d is MCL2\n", index);
- } else {
- devPtr->dev_type = PCIXCC_MCL3;
- PDEBUG("device %d is MCL3\n", index);
- }
- } while (0);
- /* In a general error case, the card is not marked online */
- return rv;
-}
-
-module_init(z90crypt_init_module);
-module_exit(z90crypt_cleanup_module);