diff options
Diffstat (limited to 'drivers/rtc')
| -rw-r--r-- | drivers/rtc/rtc-rx8025.c | 73 |
1 files changed, 36 insertions, 37 deletions
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c index c5b3814f8c8e..5bfdd34a72ff 100644 --- a/drivers/rtc/rtc-rx8025.c +++ b/drivers/rtc/rtc-rx8025.c @@ -403,17 +403,7 @@ static int rx8025_alarm_irq_enable(struct device *dev, unsigned int enabled) return 0; } -static const struct rtc_class_ops rx8025_rtc_ops = { - .read_time = rx8025_get_time, - .set_time = rx8025_set_time, - .read_alarm = rx8025_read_alarm, - .set_alarm = rx8025_set_alarm, - .alarm_irq_enable = rx8025_alarm_irq_enable, -}; - /* - * Clock precision adjustment support - * * According to the RX8025 SA/NB application manual the frequency and * temperature characteristics can be approximated using the following * equation: @@ -424,11 +414,8 @@ static const struct rtc_class_ops rx8025_rtc_ops = { * a : Coefficient = (-35 +-5) * 10**-9 * ut: Ultimate temperature in degree = +25 +-5 degree * t : Any temperature in degree - * - * Note that the clock adjustment in ppb must be entered (which is - * the negative value of the deviation). */ -static int rx8025_get_clock_adjust(struct device *dev, int *adj) +static int rx8025_read_offset(struct device *dev, long *offset) { struct i2c_client *client = to_i2c_client(dev); int digoff; @@ -437,63 +424,75 @@ static int rx8025_get_clock_adjust(struct device *dev, int *adj) if (digoff < 0) return digoff; - *adj = digoff >= 64 ? digoff - 128 : digoff; - if (*adj > 0) - (*adj)--; - *adj *= -RX8025_ADJ_RESOLUTION; + *offset = digoff >= 64 ? digoff - 128 : digoff; + if (*offset > 0) + (*offset)--; + *offset *= RX8025_ADJ_RESOLUTION; return 0; } -static int rx8025_set_clock_adjust(struct device *dev, int adj) +static int rx8025_set_offset(struct device *dev, long offset) { struct i2c_client *client = to_i2c_client(dev); u8 digoff; int err; - adj /= -RX8025_ADJ_RESOLUTION; - if (adj > RX8025_ADJ_DATA_MAX) - adj = RX8025_ADJ_DATA_MAX; - else if (adj < RX8025_ADJ_DATA_MIN) - adj = RX8025_ADJ_DATA_MIN; - else if (adj > 0) - adj++; - else if (adj < 0) - adj += 128; - digoff = adj; + offset /= RX8025_ADJ_RESOLUTION; + if (offset > RX8025_ADJ_DATA_MAX) + offset = RX8025_ADJ_DATA_MAX; + else if (offset < RX8025_ADJ_DATA_MIN) + offset = RX8025_ADJ_DATA_MIN; + else if (offset > 0) + offset++; + else if (offset < 0) + offset += 128; + digoff = offset; err = rx8025_write_reg(client, RX8025_REG_DIGOFF, digoff); if (err) return err; - dev_dbg(dev, "%s: write 0x%02x\n", __func__, digoff); - return 0; } +static const struct rtc_class_ops rx8025_rtc_ops = { + .read_time = rx8025_get_time, + .set_time = rx8025_set_time, + .read_alarm = rx8025_read_alarm, + .set_alarm = rx8025_set_alarm, + .alarm_irq_enable = rx8025_alarm_irq_enable, + .read_offset = rx8025_read_offset, + .set_offset = rx8025_set_offset, +}; + static ssize_t rx8025_sysfs_show_clock_adjust(struct device *dev, struct device_attribute *attr, char *buf) { - int err, adj; + long adj; + int err; - err = rx8025_get_clock_adjust(dev, &adj); + dev_warn_once(dev, "clock_adjust_ppb is deprecated, use offset\n"); + err = rx8025_read_offset(dev, &adj); if (err) return err; - return sprintf(buf, "%d\n", adj); + return sprintf(buf, "%ld\n", -adj); } static ssize_t rx8025_sysfs_store_clock_adjust(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - int adj, err; + long adj; + int err; - if (sscanf(buf, "%i", &adj) != 1) + dev_warn_once(dev, "clock_adjust_ppb is deprecated, use offset\n"); + if (kstrtol(buf, 10, &adj) != 0) return -EINVAL; - err = rx8025_set_clock_adjust(dev, adj); + err = rx8025_set_offset(dev, -adj); return err ? err : count; } |