diff options
Diffstat (limited to 'drivers/remoteproc/ti_k3_r5_remoteproc.c')
| -rw-r--r-- | drivers/remoteproc/ti_k3_r5_remoteproc.c | 219 |
1 files changed, 215 insertions, 4 deletions
diff --git a/drivers/remoteproc/ti_k3_r5_remoteproc.c b/drivers/remoteproc/ti_k3_r5_remoteproc.c index ff4e1fac1c7f..4840ad906018 100644 --- a/drivers/remoteproc/ti_k3_r5_remoteproc.c +++ b/drivers/remoteproc/ti_k3_r5_remoteproc.c @@ -428,6 +428,7 @@ static int k3_r5_rproc_request_mbox(struct rproc *rproc) * private to each core. Only Core0 needs to be unhalted for running the * cluster in this mode. The function uses the same reset logic as LockStep * mode for this (though the behavior is agnostic of the reset release order). + * This callback is invoked only in remoteproc mode. */ static int k3_r5_rproc_prepare(struct rproc *rproc) { @@ -493,7 +494,8 @@ static int k3_r5_rproc_prepare(struct rproc *rproc) * both cores. The access is made possible only with releasing the resets for * both cores, but with only Core0 unhalted. This function re-uses the same * reset assert logic as LockStep mode for this mode (though the behavior is - * agnostic of the reset assert order). + * agnostic of the reset assert order). This callback is invoked only in + * remoteproc mode. */ static int k3_r5_rproc_unprepare(struct rproc *rproc) { @@ -527,7 +529,8 @@ static int k3_r5_rproc_unprepare(struct rproc *rproc) * * The Single-CPU mode on applicable SoCs (eg: AM64x) only uses Core0 to execute * code, so only Core0 needs to be unhalted. The function uses the same logic - * flow as Split-mode for this. + * flow as Split-mode for this. This callback is invoked only in remoteproc + * mode. */ static int k3_r5_rproc_start(struct rproc *rproc) { @@ -598,7 +601,8 @@ put_mbox: * be done here, but is preferred to be done in the .unprepare() ops - this * maintains the symmetric behavior between the .start(), .stop(), .prepare() * and .unprepare() ops, and also balances them well between sysfs 'state' - * flow and device bind/unbind or module removal. + * flow and device bind/unbind or module removal. This callback is invoked + * only in remoteproc mode. */ static int k3_r5_rproc_stop(struct rproc *rproc) { @@ -636,6 +640,78 @@ out: } /* + * Attach to a running R5F remote processor (IPC-only mode) + * + * The R5F attach callback only needs to request the mailbox, the remote + * processor is already booted, so there is no need to issue any TI-SCI + * commands to boot the R5F cores in IPC-only mode. This callback is invoked + * only in IPC-only mode. + */ +static int k3_r5_rproc_attach(struct rproc *rproc) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + int ret; + + ret = k3_r5_rproc_request_mbox(rproc); + if (ret) + return ret; + + dev_info(dev, "R5F core initialized in IPC-only mode\n"); + return 0; +} + +/* + * Detach from a running R5F remote processor (IPC-only mode) + * + * The R5F detach callback performs the opposite operation to attach callback + * and only needs to release the mailbox, the R5F cores are not stopped and + * will be left in booted state in IPC-only mode. This callback is invoked + * only in IPC-only mode. + */ +static int k3_r5_rproc_detach(struct rproc *rproc) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + + mbox_free_channel(kproc->mbox); + dev_info(dev, "R5F core deinitialized in IPC-only mode\n"); + return 0; +} + +/* + * This function implements the .get_loaded_rsc_table() callback and is used + * to provide the resource table for the booted R5F in IPC-only mode. The K3 R5F + * firmwares follow a design-by-contract approach and are expected to have the + * resource table at the base of the DDR region reserved for firmware usage. + * This provides flexibility for the remote processor to be booted by different + * bootloaders that may or may not have the ability to publish the resource table + * address and size through a DT property. This callback is invoked only in + * IPC-only mode. + */ +static struct resource_table *k3_r5_get_loaded_rsc_table(struct rproc *rproc, + size_t *rsc_table_sz) +{ + struct k3_r5_rproc *kproc = rproc->priv; + struct device *dev = kproc->dev; + + if (!kproc->rmem[0].cpu_addr) { + dev_err(dev, "memory-region #1 does not exist, loaded rsc table can't be found"); + return ERR_PTR(-ENOMEM); + } + + /* + * NOTE: The resource table size is currently hard-coded to a maximum + * of 256 bytes. The most common resource table usage for K3 firmwares + * is to only have the vdev resource entry and an optional trace entry. + * The exact size could be computed based on resource table address, but + * the hard-coded value suffices to support the IPC-only mode. + */ + *rsc_table_sz = 256; + return (struct resource_table *)kproc->rmem[0].cpu_addr; +} + +/* * Internal Memory translation helper * * Custom function implementing the rproc .da_to_va ops to provide address @@ -1014,6 +1090,116 @@ static void k3_r5_adjust_tcm_sizes(struct k3_r5_rproc *kproc) } } +/* + * This function checks and configures a R5F core for IPC-only or remoteproc + * mode. The driver is configured to be in IPC-only mode for a R5F core when + * the core has been loaded and started by a bootloader. The IPC-only mode is + * detected by querying the System Firmware for reset, power on and halt status + * and ensuring that the core is running. Any incomplete steps at bootloader + * are validated and errored out. + * + * In IPC-only mode, the driver state flags for ATCM, BTCM and LOCZRAMA settings + * and cluster mode parsed originally from kernel DT are updated to reflect the + * actual values configured by bootloader. The driver internal device memory + * addresses for TCMs are also updated. + */ +static int k3_r5_rproc_configure_mode(struct k3_r5_rproc *kproc) +{ + struct k3_r5_cluster *cluster = kproc->cluster; + struct k3_r5_core *core = kproc->core; + struct device *cdev = core->dev; + bool r_state = false, c_state = false; + u32 ctrl = 0, cfg = 0, stat = 0, halted = 0; + u64 boot_vec = 0; + u32 atcm_enable, btcm_enable, loczrama; + struct k3_r5_core *core0; + enum cluster_mode mode; + int ret; + + core0 = list_first_entry(&cluster->cores, struct k3_r5_core, elem); + + ret = core->ti_sci->ops.dev_ops.is_on(core->ti_sci, core->ti_sci_id, + &r_state, &c_state); + if (ret) { + dev_err(cdev, "failed to get initial state, mode cannot be determined, ret = %d\n", + ret); + return ret; + } + if (r_state != c_state) { + dev_warn(cdev, "R5F core may have been powered on by a different host, programmed state (%d) != actual state (%d)\n", + r_state, c_state); + } + + ret = reset_control_status(core->reset); + if (ret < 0) { + dev_err(cdev, "failed to get initial local reset status, ret = %d\n", + ret); + return ret; + } + + ret = ti_sci_proc_get_status(core->tsp, &boot_vec, &cfg, &ctrl, + &stat); + if (ret < 0) { + dev_err(cdev, "failed to get initial processor status, ret = %d\n", + ret); + return ret; + } + atcm_enable = cfg & PROC_BOOT_CFG_FLAG_R5_ATCM_EN ? 1 : 0; + btcm_enable = cfg & PROC_BOOT_CFG_FLAG_R5_BTCM_EN ? 1 : 0; + loczrama = cfg & PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE ? 1 : 0; + if (cluster->soc_data->single_cpu_mode) { + mode = cfg & PROC_BOOT_CFG_FLAG_R5_SINGLE_CORE ? + CLUSTER_MODE_SINGLECPU : CLUSTER_MODE_SPLIT; + } else { + mode = cfg & PROC_BOOT_CFG_FLAG_R5_LOCKSTEP ? + CLUSTER_MODE_LOCKSTEP : CLUSTER_MODE_SPLIT; + } + halted = ctrl & PROC_BOOT_CTRL_FLAG_R5_CORE_HALT; + + /* + * IPC-only mode detection requires both local and module resets to + * be deasserted and R5F core to be unhalted. Local reset status is + * irrelevant if module reset is asserted (POR value has local reset + * deasserted), and is deemed as remoteproc mode + */ + if (c_state && !ret && !halted) { + dev_info(cdev, "configured R5F for IPC-only mode\n"); + kproc->rproc->state = RPROC_DETACHED; + ret = 1; + /* override rproc ops with only required IPC-only mode ops */ + kproc->rproc->ops->prepare = NULL; + kproc->rproc->ops->unprepare = NULL; + kproc->rproc->ops->start = NULL; + kproc->rproc->ops->stop = NULL; + kproc->rproc->ops->attach = k3_r5_rproc_attach; + kproc->rproc->ops->detach = k3_r5_rproc_detach; + kproc->rproc->ops->get_loaded_rsc_table = + k3_r5_get_loaded_rsc_table; + } else if (!c_state) { + dev_info(cdev, "configured R5F for remoteproc mode\n"); + ret = 0; + } else { + dev_err(cdev, "mismatched mode: local_reset = %s, module_reset = %s, core_state = %s\n", + !ret ? "deasserted" : "asserted", + c_state ? "deasserted" : "asserted", + halted ? "halted" : "unhalted"); + ret = -EINVAL; + } + + /* fixup TCMs, cluster & core flags to actual values in IPC-only mode */ + if (ret > 0) { + if (core == core0) + cluster->mode = mode; + core->atcm_enable = atcm_enable; + core->btcm_enable = btcm_enable; + core->loczrama = loczrama; + core->mem[0].dev_addr = loczrama ? 0 : K3_R5_TCM_DEV_ADDR; + core->mem[1].dev_addr = loczrama ? K3_R5_TCM_DEV_ADDR : 0; + } + + return ret; +} + static int k3_r5_cluster_rproc_init(struct platform_device *pdev) { struct k3_r5_cluster *cluster = platform_get_drvdata(pdev); @@ -1023,7 +1209,7 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev) struct device *cdev; const char *fw_name; struct rproc *rproc; - int ret; + int ret, ret1; core1 = list_last_entry(&cluster->cores, struct k3_r5_core, elem); list_for_each_entry(core, &cluster->cores, elem) { @@ -1054,6 +1240,12 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev) kproc->rproc = rproc; core->rproc = rproc; + ret = k3_r5_rproc_configure_mode(kproc); + if (ret < 0) + goto err_config; + if (ret) + goto init_rmem; + ret = k3_r5_rproc_configure(kproc); if (ret) { dev_err(dev, "initial configure failed, ret = %d\n", @@ -1061,6 +1253,7 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev) goto err_config; } +init_rmem: k3_r5_adjust_tcm_sizes(kproc); ret = k3_r5_reserved_mem_init(kproc); @@ -1085,6 +1278,15 @@ static int k3_r5_cluster_rproc_init(struct platform_device *pdev) return 0; err_split: + if (rproc->state == RPROC_ATTACHED) { + ret1 = rproc_detach(rproc); + if (ret1) { + dev_err(kproc->dev, "failed to detach rproc, ret = %d\n", + ret1); + return ret1; + } + } + rproc_del(rproc); err_add: k3_r5_reserved_mem_exit(kproc); @@ -1108,6 +1310,7 @@ static void k3_r5_cluster_rproc_exit(void *data) struct k3_r5_rproc *kproc; struct k3_r5_core *core; struct rproc *rproc; + int ret; /* * lockstep mode and single-cpu modes have only one rproc associated @@ -1123,6 +1326,14 @@ static void k3_r5_cluster_rproc_exit(void *data) rproc = core->rproc; kproc = rproc->priv; + if (rproc->state == RPROC_ATTACHED) { + ret = rproc_detach(rproc); + if (ret) { + dev_err(kproc->dev, "failed to detach rproc, ret = %d\n", ret); + return; + } + } + rproc_del(rproc); k3_r5_reserved_mem_exit(kproc); |