diff options
Diffstat (limited to 'drivers/platform/x86/x86-android-tablets.c')
| -rw-r--r-- | drivers/platform/x86/x86-android-tablets.c | 285 |
1 files changed, 284 insertions, 1 deletions
diff --git a/drivers/platform/x86/x86-android-tablets.c b/drivers/platform/x86/x86-android-tablets.c index 4acd6fa8d43b..123a4618db55 100644 --- a/drivers/platform/x86/x86-android-tablets.c +++ b/drivers/platform/x86/x86-android-tablets.c @@ -5,7 +5,7 @@ * devices typically have a bunch of things hardcoded, rather than specified * in their DSDT. * - * Copyright (C) 2021 Hans de Goede <hdegoede@redhat.com> + * Copyright (C) 2021-2022 Hans de Goede <hdegoede@redhat.com> */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -265,6 +265,56 @@ static struct gpiod_lookup_table int3496_gpo2_pin22_gpios = { }, }; +/* + * Advantech MICA-071 + * This is a standard Windows tablet, but it has an extra "quick launch" button + * which is not described in the ACPI tables in anyway. + * Use the x86-android-tablets infra to create a gpio-button device for this. + */ +static struct gpio_keys_button advantech_mica_071_button = { + .code = KEY_PROG1, + /* .gpio gets filled in by advantech_mica_071_init() */ + .active_low = true, + .desc = "prog1_key", + .type = EV_KEY, + .wakeup = false, + .debounce_interval = 50, +}; + +static const struct gpio_keys_platform_data advantech_mica_071_button_pdata __initconst = { + .buttons = &advantech_mica_071_button, + .nbuttons = 1, + .name = "prog1_key", +}; + +static const struct platform_device_info advantech_mica_071_pdevs[] __initconst = { + { + .name = "gpio-keys", + .id = PLATFORM_DEVID_AUTO, + .data = &advantech_mica_071_button_pdata, + .size_data = sizeof(advantech_mica_071_button_pdata), + }, +}; + +static int __init advantech_mica_071_init(void) +{ + struct gpio_desc *gpiod; + int ret; + + ret = x86_android_tablet_get_gpiod("INT33FC:00", 2, &gpiod); + if (ret < 0) + return ret; + advantech_mica_071_button.gpio = desc_to_gpio(gpiod); + + return 0; +} + +static const struct x86_dev_info advantech_mica_071_info __initconst = { + .pdev_info = advantech_mica_071_pdevs, + .pdev_count = ARRAY_SIZE(advantech_mica_071_pdevs), + .init = advantech_mica_071_init, +}; + /* Asus ME176C and TF103C tablets shared data */ static struct gpio_keys_button asus_me176c_tf103c_lid = { .code = SW_LID, @@ -987,6 +1037,212 @@ static void lenovo_yoga_tab2_830_1050_exit(void) } } +/* Lenovo Yoga Tab 3 Pro YT3-X90F */ + +/* + * There are 2 batteries, with 2 bq27500 fuel-gauges and 2 bq25892 chargers, + * "bq25890-charger-1" is instantiated from: drivers/i2c/busses/i2c-cht-wc.c. + */ +static const char * const lenovo_yt3_bq25892_0_suppliers[] = { "cht_wcove_pwrsrc" }; +static const char * const bq25890_1_psy[] = { "bq25890-charger-1" }; + +static const struct property_entry fg_bq25890_1_supply_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", bq25890_1_psy), + { } +}; + +static const struct software_node fg_bq25890_1_supply_node = { + .properties = fg_bq25890_1_supply_props, +}; + +/* bq25892 charger settings for the flat lipo battery behind the screen */ +static const struct property_entry lenovo_yt3_bq25892_0_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_0_suppliers), + PROPERTY_ENTRY_STRING("linux,power-supply-name", "bq25892-second-chrg"), + PROPERTY_ENTRY_U32("linux,iinlim-percentage", 40), + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + /* Values taken from Android Factory Image */ + PROPERTY_ENTRY_U32("ti,charge-current", 2048000), + PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), + PROPERTY_ENTRY_U32("ti,termination-current", 128000), + PROPERTY_ENTRY_U32("ti,precharge-current", 128000), + PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3700000), + PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), + PROPERTY_ENTRY_U32("ti,boost-max-current", 500000), + PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), + { } +}; + +static const struct software_node lenovo_yt3_bq25892_0_node = { + .properties = lenovo_yt3_bq25892_0_props, +}; + +static const struct x86_i2c_client_info lenovo_yt3_i2c_clients[] __initconst = { + { + /* bq27500 fuel-gauge for the flat lipo battery behind the screen */ + .board_info = { + .type = "bq27500", + .addr = 0x55, + .dev_name = "bq27500_0", + .swnode = &fg_bq25890_supply_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + }, { + /* bq25892 charger for the flat lipo battery behind the screen */ + .board_info = { + .type = "bq25892", + .addr = 0x6b, + .dev_name = "bq25892_0", + .swnode = &lenovo_yt3_bq25892_0_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C1", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FF:01", + .index = 5, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, { + /* bq27500 fuel-gauge for the round li-ion cells in the hinge */ + .board_info = { + .type = "bq27500", + .addr = 0x55, + .dev_name = "bq27500_1", + .swnode = &fg_bq25890_1_supply_node, + }, + .adapter_path = "\\_SB_.PCI0.I2C2", + } +}; + +static int __init lenovo_yt3_init(void) +{ + struct gpio_desc *gpiod; + int ret; + + /* + * The "bq25892_0" charger IC has its /CE (Charge-Enable) and OTG pins + * connected to GPIOs, rather then having them hardwired to the correct + * values as is normally done. + * + * The bq25890_charger driver controls these through I2C, but this only + * works if not overridden by the pins. Set these pins here: + * 1. Set /CE to 0 to allow charging. + * 2. Set OTG to 0 disable V5 boost output since the 5V boost output of + * the main "bq25892_1" charger is used when necessary. + */ + + /* /CE pin */ + ret = x86_android_tablet_get_gpiod("INT33FF:02", 22, &gpiod); + if (ret < 0) + return ret; + + /* + * The gpio_desc returned by x86_android_tablet_get_gpiod() is a "raw" + * gpio_desc, that is there is no way to pass lookup-flags like + * GPIO_ACTIVE_LOW. Set the GPIO to 0 here to enable charging since + * the /CE pin is active-low, but not marked as such in the gpio_desc. + */ + gpiod_set_value(gpiod, 0); + + /* OTG pin */ + ret = x86_android_tablet_get_gpiod("INT33FF:03", 19, &gpiod); + if (ret < 0) + return ret; + + gpiod_set_value(gpiod, 0); + + return 0; +} + +static const struct x86_dev_info lenovo_yt3_info __initconst = { + .i2c_client_info = lenovo_yt3_i2c_clients, + .i2c_client_count = ARRAY_SIZE(lenovo_yt3_i2c_clients), + .init = lenovo_yt3_init, +}; + +/* Medion Lifetab S10346 tablets have an Android factory img with everything hardcoded */ +static const char * const medion_lifetab_s10346_accel_mount_matrix[] = { + "0", "1", "0", + "1", "0", "0", + "0", "0", "1" +}; + +static const struct property_entry medion_lifetab_s10346_accel_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("mount-matrix", medion_lifetab_s10346_accel_mount_matrix), + { } +}; + +static const struct software_node medion_lifetab_s10346_accel_node = { + .properties = medion_lifetab_s10346_accel_props, +}; + +/* Note the LCD panel is mounted upside down, this is correctly indicated in the VBT */ +static const struct property_entry medion_lifetab_s10346_touchscreen_props[] = { + PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"), + PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"), + { } +}; + +static const struct software_node medion_lifetab_s10346_touchscreen_node = { + .properties = medion_lifetab_s10346_touchscreen_props, +}; + +static const struct x86_i2c_client_info medion_lifetab_s10346_i2c_clients[] __initconst = { + { + /* kxtj21009 accel */ + .board_info = { + .type = "kxtj21009", + .addr = 0x0f, + .dev_name = "kxtj21009", + .swnode = &medion_lifetab_s10346_accel_node, + }, + .adapter_path = "\\_SB_.I2C3", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_GPIOINT, + .chip = "INT33FC:02", + .index = 23, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_HIGH, + }, + }, { + /* goodix touchscreen */ + .board_info = { + .type = "GDIX1001:00", + .addr = 0x14, + .dev_name = "goodix_ts", + .swnode = &medion_lifetab_s10346_touchscreen_node, + }, + .adapter_path = "\\_SB_.I2C4", + .irq_data = { + .type = X86_ACPI_IRQ_TYPE_APIC, + .index = 0x44, + .trigger = ACPI_EDGE_SENSITIVE, + .polarity = ACPI_ACTIVE_LOW, + }, + }, +}; + +static struct gpiod_lookup_table medion_lifetab_s10346_goodix_gpios = { + .dev_id = "i2c-goodix_ts", + .table = { + GPIO_LOOKUP("INT33FC:01", 26, "reset", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 3, "irq", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table * const medion_lifetab_s10346_gpios[] = { + &medion_lifetab_s10346_goodix_gpios, + NULL +}; + +static const struct x86_dev_info medion_lifetab_s10346_info __initconst = { + .i2c_client_info = medion_lifetab_s10346_i2c_clients, + .i2c_client_count = ARRAY_SIZE(medion_lifetab_s10346_i2c_clients), + .gpiod_lookup_tables = medion_lifetab_s10346_gpios, +}; + /* Nextbook Ares 8 tablets have an Android factory img with everything hardcoded */ static const char * const nextbook_ares8_accel_mount_matrix[] = { "0", "-1", "0", @@ -1180,6 +1436,14 @@ static const struct x86_dev_info xiaomi_mipad2_info __initconst = { static const struct dmi_system_id x86_android_tablet_ids[] __initconst = { { + /* Advantech MICA-071 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Advantech"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "MICA-071"), + }, + .driver_data = (void *)&advantech_mica_071_info, + }, + { /* Asus MeMO Pad 7 ME176C */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), @@ -1246,6 +1510,25 @@ static const struct dmi_system_id x86_android_tablet_ids[] __initconst = { .driver_data = (void *)&lenovo_yoga_tab2_830_1050_info, }, { + /* Lenovo Yoga Tab 3 Pro YT3-X90F */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Blade3-10A-001"), + }, + .driver_data = (void *)&lenovo_yt3_info, + }, + { + /* Medion Lifetab S10346 */ + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"), + DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"), + /* Above strings are much too generic, also match on BIOS date */ + DMI_MATCH(DMI_BIOS_DATE, "10/22/2015"), + }, + .driver_data = (void *)&medion_lifetab_s10346_info, + }, + { /* Nextbook Ares 8 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Insyde"), |