diff options
Diffstat (limited to 'drivers/phy')
| -rw-r--r-- | drivers/phy/st/phy-stm32-usbphyc.c | 88 |
1 files changed, 54 insertions, 34 deletions
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c index 8b11d95b2c20..d08fbb180e43 100644 --- a/drivers/phy/st/phy-stm32-usbphyc.c +++ b/drivers/phy/st/phy-stm32-usbphyc.c @@ -17,6 +17,7 @@ #define STM32_USBPHYC_PLL 0x0 #define STM32_USBPHYC_MISC 0x8 +#define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100)) #define STM32_USBPHYC_VERSION 0x3F4 /* STM32_USBPHYC_PLL bit fields */ @@ -32,12 +33,16 @@ /* STM32_USBPHYC_MISC bit fields */ #define SWITHOST BIT(0) +/* STM32_USBPHYC_MONITOR bit fields */ +#define STM32_USBPHYC_MON_OUT GENMASK(3, 0) +#define STM32_USBPHYC_MON_SEL GENMASK(8, 4) +#define STM32_USBPHYC_MON_SEL_LOCKP 0x1F +#define STM32_USBPHYC_MON_OUT_LOCKP BIT(3) + /* STM32_USBPHYC_VERSION bit fields */ #define MINREV GENMASK(3, 0) #define MAJREV GENMASK(7, 4) -#define PLL_LOCK_TIME_US 100 -#define PLL_PWR_DOWN_TIME_US 5 #define PLL_FVCO_MHZ 2880 #define PLL_INFF_MIN_RATE_HZ 19200000 #define PLL_INFF_MAX_RATE_HZ 38400000 @@ -64,6 +69,7 @@ struct stm32_usbphyc { int nphys; struct regulator *vdda1v1; struct regulator *vdda1v8; + atomic_t n_pll_cons; int switch_setup; }; @@ -171,35 +177,27 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) return 0; } -static bool stm32_usbphyc_has_one_phy_active(struct stm32_usbphyc *usbphyc) +static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) { - int i; + void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; + u32 pllen; + + stm32_usbphyc_clr_bits(pll_reg, PLLEN); - for (i = 0; i < usbphyc->nphys; i++) - if (usbphyc->phys[i]->active) - return true; + /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ + if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 5, 50)) + dev_err(usbphyc->dev, "PLL not reset\n"); - return false; + return stm32_usbphyc_regulators_disable(usbphyc); } static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) { - void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; - - /* Check if other phy port active */ - if (stm32_usbphyc_has_one_phy_active(usbphyc)) + /* Check if a phy port is still active or clk48 in use */ + if (atomic_dec_return(&usbphyc->n_pll_cons) > 0) return 0; - stm32_usbphyc_clr_bits(pll_reg, PLLEN); - /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ - udelay(PLL_PWR_DOWN_TIME_US); - - if (readl_relaxed(pll_reg) & PLLEN) { - dev_err(usbphyc->dev, "PLL not reset\n"); - return -EIO; - } - - return stm32_usbphyc_regulators_disable(usbphyc); + return __stm32_usbphyc_pll_disable(usbphyc); } static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) @@ -208,39 +206,43 @@ static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) bool pllen = readl_relaxed(pll_reg) & PLLEN; int ret; - /* Check if one phy port has already configured the pll */ - if (pllen && stm32_usbphyc_has_one_phy_active(usbphyc)) + /* + * Check if a phy port or clk48 prepare has configured the pll + * and ensure the PLL is enabled + */ + if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen) return 0; if (pllen) { - ret = stm32_usbphyc_pll_disable(usbphyc); + /* + * PLL shouldn't be enabled without known consumer, + * disable it and reinit n_pll_cons + */ + dev_warn(usbphyc->dev, "PLL enabled without known consumers\n"); + + ret = __stm32_usbphyc_pll_disable(usbphyc); if (ret) return ret; } ret = stm32_usbphyc_regulators_enable(usbphyc); if (ret) - return ret; + goto dec_n_pll_cons; ret = stm32_usbphyc_pll_init(usbphyc); if (ret) goto reg_disable; stm32_usbphyc_set_bits(pll_reg, PLLEN); - /* Wait for maximum lock time */ - udelay(PLL_LOCK_TIME_US); - - if (!(readl_relaxed(pll_reg) & PLLEN)) { - dev_err(usbphyc->dev, "PLLEN not set\n"); - ret = -EIO; - goto reg_disable; - } return 0; reg_disable: stm32_usbphyc_regulators_disable(usbphyc); +dec_n_pll_cons: + atomic_dec(&usbphyc->n_pll_cons); + return ret; } @@ -248,15 +250,33 @@ static int stm32_usbphyc_phy_init(struct phy *phy) { struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; + u32 reg_mon = STM32_USBPHYC_MONITOR(usbphyc_phy->index); + u32 monsel = FIELD_PREP(STM32_USBPHYC_MON_SEL, + STM32_USBPHYC_MON_SEL_LOCKP); + u32 monout; int ret; ret = stm32_usbphyc_pll_enable(usbphyc); if (ret) return ret; + /* Check that PLL Lock input to PHY is High */ + writel_relaxed(monsel, usbphyc->base + reg_mon); + ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout, + (monout & STM32_USBPHYC_MON_OUT_LOCKP), + 100, 1000); + if (ret) { + dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n", + (u32)(monout & STM32_USBPHYC_MON_OUT)); + goto pll_disable; + } + usbphyc_phy->active = true; return 0; + +pll_disable: + return stm32_usbphyc_pll_disable(usbphyc); } static int stm32_usbphyc_phy_exit(struct phy *phy) |