diff options
Diffstat (limited to 'drivers/pci/host/pci-imx6.c')
-rw-r--r-- | drivers/pci/host/pci-imx6.c | 127 |
1 files changed, 69 insertions, 58 deletions
diff --git a/drivers/pci/host/pci-imx6.c b/drivers/pci/host/pci-imx6.c index 837d5e0447ac..6b5d8c2fe2f2 100644 --- a/drivers/pci/host/pci-imx6.c +++ b/drivers/pci/host/pci-imx6.c @@ -19,6 +19,7 @@ #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <linux/module.h> #include <linux/of_gpio.h> +#include <linux/of_device.h> #include <linux/pci.h> #include <linux/platform_device.h> #include <linux/regmap.h> @@ -31,6 +32,11 @@ #define to_imx6_pcie(x) container_of(x, struct imx6_pcie, pp) +enum imx6_pcie_variants { + IMX6Q, + IMX6SX +}; + struct imx6_pcie { int reset_gpio; bool gpio_active_high; @@ -40,7 +46,7 @@ struct imx6_pcie { struct clk *pcie; struct pcie_port pp; struct regmap *iomuxc_gpr; - bool is_imx6sx; + enum imx6_pcie_variants variant; void __iomem *mem_base; u32 tx_deemph_gen1; u32 tx_deemph_gen2_3p5db; @@ -240,7 +246,8 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp) struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); u32 val, gpr1, gpr12; - if (imx6_pcie->is_imx6sx) { + switch (imx6_pcie->variant) { + case IMX6SX: regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_TEST_POWERDOWN, IMX6SX_GPR12_PCIE_TEST_POWERDOWN); @@ -248,72 +255,78 @@ static int imx6_pcie_assert_core_reset(struct pcie_port *pp) regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, IMX6SX_GPR5_PCIE_BTNRST_RESET, IMX6SX_GPR5_PCIE_BTNRST_RESET); - return 0; - } - - /* - * If the bootloader already enabled the link we need some special - * handling to get the core back into a state where it is safe to - * touch it for configuration. As there is no dedicated reset signal - * wired up for MX6QDL, we need to manually force LTSSM into "detect" - * state before completely disabling LTSSM, which is a prerequisite - * for core configuration. - * - * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong - * indication that the bootloader activated the link. - */ - regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1); - regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12); - - if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) && - (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) { - val = readl(pp->dbi_base + PCIE_PL_PFLR); - val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; - val |= PCIE_PL_PFLR_FORCE_LINK; - writel(val, pp->dbi_base + PCIE_PL_PFLR); + break; + case IMX6Q: + /* + * If the bootloader already enabled the link we need some + * special handling to get the core back into a state where + * it is safe to touch it for configuration. As there is + * no dedicated reset signal wired up for MX6QDL, we need + * to manually force LTSSM into "detect" state before + * completely disabling LTSSM, which is a prerequisite for + * core configuration. + * + * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we + * have a strong indication that the bootloader activated + * the link. + */ + regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1); + regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12); + + if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) && + (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) { + val = readl(pp->dbi_base + PCIE_PL_PFLR); + val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; + val |= PCIE_PL_PFLR_FORCE_LINK; + writel(val, pp->dbi_base + PCIE_PL_PFLR); + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, + IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); + } - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, - IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); + break; } - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_REF_CLK_EN, 0 << 16); - return 0; } static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie) { struct pcie_port *pp = &imx6_pcie->pp; - int ret; + int ret = 0; - if (imx6_pcie->is_imx6sx) { + switch (imx6_pcie->variant) { + case IMX6SX: ret = clk_prepare_enable(imx6_pcie->pcie_inbound_axi); if (ret) { dev_err(pp->dev, "unable to enable pcie_axi clock\n"); - return ret; + break; } regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_TEST_POWERDOWN, 0); - return ret; + break; + case IMX6Q: + /* power up core phy and enable ref clock */ + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18); + /* + * the async reset input need ref clock to sync internally, + * when the ref clock comes after reset, internal synced + * reset time is too short, cannot meet the requirement. + * add one ~10us delay here. + */ + udelay(10); + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16); + break; } - /* power up core phy and enable ref clock */ - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18); - /* - * the async reset input need ref clock to sync internally, - * when the ref clock comes after reset, internal synced - * reset time is too short, cannot meet the requirement. - * add one ~10us delay here. - */ - udelay(10); - regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, - IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16); - return 0; + return ret; } static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) @@ -357,7 +370,7 @@ static int imx6_pcie_deassert_core_reset(struct pcie_port *pp) !imx6_pcie->gpio_active_high); } - if (imx6_pcie->is_imx6sx) + if (imx6_pcie->variant == IMX6SX) regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR5, IMX6SX_GPR5_PCIE_BTNRST_RESET, 0); @@ -371,18 +384,16 @@ err_pcie_bus: clk_disable_unprepare(imx6_pcie->pcie_phy); err_pcie_phy: return ret; - } static void imx6_pcie_init_phy(struct pcie_port *pp) { struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); - if (imx6_pcie->is_imx6sx) { + if (imx6_pcie->variant == IMX6SX) regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6SX_GPR12_PCIE_RX_EQ_MASK, IMX6SX_GPR12_PCIE_RX_EQ_2); - } regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); @@ -593,8 +604,8 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) pp = &imx6_pcie->pp; pp->dev = &pdev->dev; - imx6_pcie->is_imx6sx = of_device_is_compatible(pp->dev->of_node, - "fsl,imx6sx-pcie"); + imx6_pcie->variant = + (enum imx6_pcie_variants)of_device_get_match_data(&pdev->dev); /* Added for PCI abort handling */ hook_fault_code(16 + 6, imx6q_pcie_abort_handler, SIGBUS, 0, @@ -643,7 +654,7 @@ static int __init imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(imx6_pcie->pcie); } - if (imx6_pcie->is_imx6sx) { + if (imx6_pcie->variant == IMX6SX) { imx6_pcie->pcie_inbound_axi = devm_clk_get(&pdev->dev, "pcie_inbound_axi"); if (IS_ERR(imx6_pcie->pcie_inbound_axi)) { @@ -705,8 +716,8 @@ static void imx6_pcie_shutdown(struct platform_device *pdev) } static const struct of_device_id imx6_pcie_of_match[] = { - { .compatible = "fsl,imx6q-pcie", }, - { .compatible = "fsl,imx6sx-pcie", }, + { .compatible = "fsl,imx6q-pcie", .data = (void *)IMX6Q, }, + { .compatible = "fsl,imx6sx-pcie", .data = (void *)IMX6SX, }, {}, }; MODULE_DEVICE_TABLE(of, imx6_pcie_of_match); |