diff options
Diffstat (limited to 'drivers/nfc')
-rw-r--r-- | drivers/nfc/port100.c | 671 |
1 files changed, 670 insertions, 1 deletions
diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c index f167907ae39c..251a2c112299 100644 --- a/drivers/nfc/port100.c +++ b/drivers/nfc/port100.c @@ -32,6 +32,57 @@ #define PORT100_CAPABILITIES (NFC_DIGITAL_DRV_CAPS_IN_CRC | \ NFC_DIGITAL_DRV_CAPS_TG_CRC) +/* Standard port100 frame definitions */ +#define PORT100_FRAME_HEADER_LEN (sizeof(struct port100_frame) \ + + 2) /* data[0] CC, data[1] SCC */ +#define PORT100_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ + +#define PORT100_COMM_RF_HEAD_MAX_LEN (sizeof(struct port100_tg_comm_rf_cmd)) + +/* + * Max extended frame payload len, excluding CC and SCC + * which are already in PORT100_FRAME_HEADER_LEN. + */ +#define PORT100_FRAME_MAX_PAYLOAD_LEN 1001 + +#define PORT100_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2), + Postamble (1) */ +static u8 ack_frame[PORT100_FRAME_ACK_SIZE] = { + 0x00, 0x00, 0xff, 0x00, 0xff, 0x00 +}; + +#define PORT100_FRAME_CHECKSUM(f) (f->data[le16_to_cpu(f->datalen)]) +#define PORT100_FRAME_POSTAMBLE(f) (f->data[le16_to_cpu(f->datalen) + 1]) + +/* start of frame */ +#define PORT100_FRAME_SOF 0x00FF +#define PORT100_FRAME_EXT 0xFFFF +#define PORT100_FRAME_ACK 0x00FF + +/* Port-100 command: in or out */ +#define PORT100_FRAME_DIRECTION(f) (f->data[0]) /* CC */ +#define PORT100_FRAME_DIR_OUT 0xD6 +#define PORT100_FRAME_DIR_IN 0xD7 + +/* Port-100 sub-command */ +#define PORT100_FRAME_CMD(f) (f->data[1]) /* SCC */ + +#define PORT100_CMD_GET_FIRMWARE_VERSION 0x20 +#define PORT100_CMD_GET_COMMAND_TYPE 0x28 +#define PORT100_CMD_SET_COMMAND_TYPE 0x2A + +#define PORT100_CMD_RESPONSE(cmd) (cmd + 1) + +#define PORT100_CMD_TYPE_IS_SUPPORTED(mask, cmd_type) \ + ((mask) & (0x01 << (cmd_type))) +#define PORT100_CMD_TYPE_0 0 +#define PORT100_CMD_TYPE_1 1 + +struct port100; + +typedef void (*port100_send_async_complete_t)(struct port100 *dev, void *arg, + struct sk_buff *resp); + struct port100 { struct nfc_digital_dev *nfc_digital_dev; @@ -40,10 +91,537 @@ struct port100 { struct usb_device *udev; struct usb_interface *interface; + + struct urb *out_urb; + struct urb *in_urb; + + struct work_struct cmd_complete_work; + + u8 cmd_type; + + /* The digital stack serializes commands to be sent. There is no need + * for any queuing/locking mechanism at driver level. + */ + struct port100_cmd *cmd; +}; + +struct port100_cmd { + u8 code; + int status; + struct sk_buff *req; + struct sk_buff *resp; + int resp_len; + port100_send_async_complete_t complete_cb; + void *complete_cb_context; +}; + +struct port100_frame { + u8 preamble; + __be16 start_frame; + __be16 extended_frame; + __le16 datalen; + u8 datalen_checksum; + u8 data[]; +} __packed; + +struct port100_ack_frame { + u8 preamble; + __be16 start_frame; + __be16 ack_frame; + u8 postambule; +} __packed; + +struct port100_cb_arg { + nfc_digital_cmd_complete_t complete_cb; + void *complete_arg; + u8 mdaa; }; +struct port100_tg_comm_rf_cmd { + __le16 guard_time; + __le16 send_timeout; + u8 mdaa; + u8 nfca_param[6]; + u8 nfcf_param[18]; + u8 mf_halted; + u8 arae_flag; + __le16 recv_timeout; + u8 data[]; +} __packed; + +/* The rule: value + checksum = 0 */ +static inline u8 port100_checksum(u16 value) +{ + return ~(((u8 *)&value)[0] + ((u8 *)&value)[1]) + 1; +} + +/* The rule: sum(data elements) + checksum = 0 */ +static u8 port100_data_checksum(u8 *data, int datalen) +{ + u8 sum = 0; + int i; + + for (i = 0; i < datalen; i++) + sum += data[i]; + + return port100_checksum(sum); +} + +static void port100_tx_frame_init(void *_frame, u8 cmd_code) +{ + struct port100_frame *frame = _frame; + + frame->preamble = 0; + frame->start_frame = cpu_to_be16(PORT100_FRAME_SOF); + frame->extended_frame = cpu_to_be16(PORT100_FRAME_EXT); + PORT100_FRAME_DIRECTION(frame) = PORT100_FRAME_DIR_OUT; + PORT100_FRAME_CMD(frame) = cmd_code; + frame->datalen = cpu_to_le16(2); +} + +static void port100_tx_frame_finish(void *_frame) +{ + struct port100_frame *frame = _frame; + + frame->datalen_checksum = port100_checksum(le16_to_cpu(frame->datalen)); + + PORT100_FRAME_CHECKSUM(frame) = + port100_data_checksum(frame->data, le16_to_cpu(frame->datalen)); + + PORT100_FRAME_POSTAMBLE(frame) = 0; +} + +static void port100_tx_update_payload_len(void *_frame, int len) +{ + struct port100_frame *frame = _frame; + + frame->datalen = cpu_to_le16(le16_to_cpu(frame->datalen) + len); +} + +static bool port100_rx_frame_is_valid(void *_frame) +{ + u8 checksum; + struct port100_frame *frame = _frame; + + if (frame->start_frame != cpu_to_be16(PORT100_FRAME_SOF) || + frame->extended_frame != cpu_to_be16(PORT100_FRAME_EXT)) + return false; + + checksum = port100_checksum(le16_to_cpu(frame->datalen)); + if (checksum != frame->datalen_checksum) + return false; + + checksum = port100_data_checksum(frame->data, + le16_to_cpu(frame->datalen)); + if (checksum != PORT100_FRAME_CHECKSUM(frame)) + return false; + + return true; +} + +static bool port100_rx_frame_is_ack(struct port100_ack_frame *frame) +{ + return (frame->start_frame == cpu_to_be16(PORT100_FRAME_SOF) && + frame->ack_frame == cpu_to_be16(PORT100_FRAME_ACK)); +} + +static inline int port100_rx_frame_size(void *frame) +{ + struct port100_frame *f = frame; + + return sizeof(struct port100_frame) + le16_to_cpu(f->datalen) + + PORT100_FRAME_TAIL_LEN; +} + +static bool port100_rx_frame_is_cmd_response(struct port100 *dev, void *frame) +{ + struct port100_frame *f = frame; + + return (PORT100_FRAME_CMD(f) == PORT100_CMD_RESPONSE(dev->cmd->code)); +} + +static void port100_recv_response(struct urb *urb) +{ + struct port100 *dev = urb->context; + struct port100_cmd *cmd = dev->cmd; + u8 *in_frame; + + cmd->status = urb->status; + + switch (urb->status) { + case 0: + break; /* success */ + case -ECONNRESET: + case -ENOENT: + nfc_err(&dev->interface->dev, + "The urb has been canceled (status %d)", urb->status); + goto sched_wq; + case -ESHUTDOWN: + default: + nfc_err(&dev->interface->dev, "Urb failure (status %d)", + urb->status); + goto sched_wq; + } + + in_frame = dev->in_urb->transfer_buffer; + + if (!port100_rx_frame_is_valid(in_frame)) { + nfc_err(&dev->interface->dev, "Received an invalid frame"); + cmd->status = -EIO; + goto sched_wq; + } + + print_hex_dump_debug("PORT100 RX: ", DUMP_PREFIX_NONE, 16, 1, in_frame, + port100_rx_frame_size(in_frame), false); + + if (!port100_rx_frame_is_cmd_response(dev, in_frame)) { + nfc_err(&dev->interface->dev, + "It's not the response to the last command"); + cmd->status = -EIO; + goto sched_wq; + } + +sched_wq: + schedule_work(&dev->cmd_complete_work); +} + +static int port100_submit_urb_for_response(struct port100 *dev, gfp_t flags) +{ + dev->in_urb->complete = port100_recv_response; + + return usb_submit_urb(dev->in_urb, flags); +} + +static void port100_recv_ack(struct urb *urb) +{ + struct port100 *dev = urb->context; + struct port100_cmd *cmd = dev->cmd; + struct port100_ack_frame *in_frame; + int rc; + + cmd->status = urb->status; + + switch (urb->status) { + case 0: + break; /* success */ + case -ECONNRESET: + case -ENOENT: + nfc_err(&dev->interface->dev, + "The urb has been stopped (status %d)", urb->status); + goto sched_wq; + case -ESHUTDOWN: + default: + nfc_err(&dev->interface->dev, "Urb failure (status %d)", + urb->status); + goto sched_wq; + } + + in_frame = dev->in_urb->transfer_buffer; + + if (!port100_rx_frame_is_ack(in_frame)) { + nfc_err(&dev->interface->dev, "Received an invalid ack"); + cmd->status = -EIO; + goto sched_wq; + } + + rc = port100_submit_urb_for_response(dev, GFP_ATOMIC); + if (rc) { + nfc_err(&dev->interface->dev, + "usb_submit_urb failed with result %d", rc); + cmd->status = rc; + goto sched_wq; + } + + return; + +sched_wq: + schedule_work(&dev->cmd_complete_work); +} + +static int port100_submit_urb_for_ack(struct port100 *dev, gfp_t flags) +{ + dev->in_urb->complete = port100_recv_ack; + + return usb_submit_urb(dev->in_urb, flags); +} + +static int port100_send_ack(struct port100 *dev) +{ + int rc; + + dev->out_urb->transfer_buffer = ack_frame; + dev->out_urb->transfer_buffer_length = sizeof(ack_frame); + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); + + return rc; +} + +static int port100_send_frame_async(struct port100 *dev, struct sk_buff *out, + struct sk_buff *in, int in_len) +{ + int rc; + + dev->out_urb->transfer_buffer = out->data; + dev->out_urb->transfer_buffer_length = out->len; + + dev->in_urb->transfer_buffer = in->data; + dev->in_urb->transfer_buffer_length = in_len; + + print_hex_dump_debug("PORT100 TX: ", DUMP_PREFIX_NONE, 16, 1, + out->data, out->len, false); + + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); + if (rc) + return rc; + + rc = port100_submit_urb_for_ack(dev, GFP_KERNEL); + if (rc) + goto error; + + return 0; + +error: + usb_unlink_urb(dev->out_urb); + return rc; +} + +static void port100_build_cmd_frame(struct port100 *dev, u8 cmd_code, + struct sk_buff *skb) +{ + /* payload is already there, just update datalen */ + int payload_len = skb->len; + + skb_push(skb, PORT100_FRAME_HEADER_LEN); + skb_put(skb, PORT100_FRAME_TAIL_LEN); + + port100_tx_frame_init(skb->data, cmd_code); + port100_tx_update_payload_len(skb->data, payload_len); + port100_tx_frame_finish(skb->data); +} + +static void port100_send_async_complete(struct port100 *dev) +{ + struct port100_cmd *cmd = dev->cmd; + int status = cmd->status; + + struct sk_buff *req = cmd->req; + struct sk_buff *resp = cmd->resp; + + dev_kfree_skb(req); + + dev->cmd = NULL; + + if (status < 0) { + cmd->complete_cb(dev, cmd->complete_cb_context, + ERR_PTR(status)); + dev_kfree_skb(resp); + goto done; + } + + skb_put(resp, port100_rx_frame_size(resp->data)); + skb_pull(resp, PORT100_FRAME_HEADER_LEN); + skb_trim(resp, resp->len - PORT100_FRAME_TAIL_LEN); + + cmd->complete_cb(dev, cmd->complete_cb_context, resp); + +done: + kfree(cmd); +} + +static int port100_send_cmd_async(struct port100 *dev, u8 cmd_code, + struct sk_buff *req, + port100_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct port100_cmd *cmd; + struct sk_buff *resp; + int rc; + int resp_len = PORT100_FRAME_HEADER_LEN + + PORT100_FRAME_MAX_PAYLOAD_LEN + + PORT100_FRAME_TAIL_LEN; + + resp = alloc_skb(resp_len, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) { + dev_kfree_skb(resp); + return -ENOMEM; + } + + cmd->code = cmd_code; + cmd->req = req; + cmd->resp = resp; + cmd->resp_len = resp_len; + cmd->complete_cb = complete_cb; + cmd->complete_cb_context = complete_cb_context; + + port100_build_cmd_frame(dev, cmd_code, req); + + dev->cmd = cmd; + + rc = port100_send_frame_async(dev, req, resp, resp_len); + if (rc) { + kfree(cmd); + dev_kfree_skb(resp); + dev->cmd = NULL; + } + + return rc; +} + +struct port100_sync_cmd_response { + struct sk_buff *resp; + struct completion done; +}; + +static void port100_wq_cmd_complete(struct work_struct *work) +{ + struct port100 *dev = container_of(work, struct port100, + cmd_complete_work); + + port100_send_async_complete(dev); +} + +static void port100_send_sync_complete(struct port100 *dev, void *_arg, + struct sk_buff *resp) +{ + struct port100_sync_cmd_response *arg = _arg; + + arg->resp = resp; + complete(&arg->done); +} + +static struct sk_buff *port100_send_cmd_sync(struct port100 *dev, u8 cmd_code, + struct sk_buff *req) +{ + int rc; + struct port100_sync_cmd_response arg; + + init_completion(&arg.done); + + rc = port100_send_cmd_async(dev, cmd_code, req, + port100_send_sync_complete, &arg); + if (rc) { + dev_kfree_skb(req); + return ERR_PTR(rc); + } + + wait_for_completion(&arg.done); + + return arg.resp; +} + +static void port100_send_complete(struct urb *urb) +{ + struct port100 *dev = urb->context; + + switch (urb->status) { + case 0: + break; /* success */ + case -ECONNRESET: + case -ENOENT: + nfc_err(&dev->interface->dev, + "The urb has been stopped (status %d)", urb->status); + break; + case -ESHUTDOWN: + default: + nfc_err(&dev->interface->dev, "Urb failure (status %d)", + urb->status); + } +} + static void port100_abort_cmd(struct nfc_digital_dev *ddev) { + struct port100 *dev = nfc_digital_get_drvdata(ddev); + + /* An ack will cancel the last issued command */ + port100_send_ack(dev); + + /* cancel the urb request */ + usb_kill_urb(dev->in_urb); +} + +static struct sk_buff *port100_alloc_skb(struct port100 *dev, unsigned int size) +{ + struct sk_buff *skb; + + skb = alloc_skb(dev->skb_headroom + dev->skb_tailroom + size, + GFP_KERNEL); + if (skb) + skb_reserve(skb, dev->skb_headroom); + + return skb; +} + +static int port100_set_command_type(struct port100 *dev, u8 command_type) +{ + struct sk_buff *skb; + struct sk_buff *resp; + int rc; + + skb = port100_alloc_skb(dev, 1); + if (!skb) + return -ENOMEM; + + *skb_put(skb, sizeof(u8)) = command_type; + + resp = port100_send_cmd_sync(dev, PORT100_CMD_SET_COMMAND_TYPE, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + rc = resp->data[0]; + + dev_kfree_skb(resp); + + return rc; +} + +static u64 port100_get_command_type_mask(struct port100 *dev) +{ + struct sk_buff *skb; + struct sk_buff *resp; + u64 mask; + + skb = port100_alloc_skb(dev, 0); + if (!skb) + return -ENOMEM; + + resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_COMMAND_TYPE, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + if (resp->len < 8) + mask = 0; + else + mask = be64_to_cpu(*(__be64 *)resp->data); + + dev_kfree_skb(resp); + + return mask; +} + +static u16 port100_get_firmware_version(struct port100 *dev) +{ + struct sk_buff *skb; + struct sk_buff *resp; + u16 fw_ver; + + skb = port100_alloc_skb(dev, 0); + if (!skb) + return 0; + + resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_FIRMWARE_VERSION, + skb); + if (IS_ERR(resp)) + return 0; + + fw_ver = le16_to_cpu(*(__le16 *)resp->data); + + dev_kfree_skb(resp); + + return fw_ver; } static int port100_switch_rf(struct nfc_digital_dev *ddev, bool on) @@ -118,6 +696,13 @@ static int port100_probe(struct usb_interface *interface, { struct port100 *dev; int rc; + struct usb_host_interface *iface_desc; + struct usb_endpoint_descriptor *endpoint; + int in_endpoint; + int out_endpoint; + u16 fw_version; + u64 cmd_type_mask; + int i; dev = devm_kzalloc(&interface->dev, sizeof(struct port100), GFP_KERNEL); if (!dev) @@ -127,7 +712,79 @@ static int port100_probe(struct usb_interface *interface, dev->interface = interface; usb_set_intfdata(interface, dev); - nfc_info(&interface->dev, "Sony NFC Port-100 Series attached\n"); + in_endpoint = out_endpoint = 0; + iface_desc = interface->cur_altsetting; + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { + endpoint = &iface_desc->endpoint[i].desc; + + if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) + in_endpoint = endpoint->bEndpointAddress; + + if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) + out_endpoint = endpoint->bEndpointAddress; + } + + if (!in_endpoint || !out_endpoint) { + nfc_err(&interface->dev, + "Could not find bulk-in or bulk-out endpoint\n"); + rc = -ENODEV; + goto error; + } + + dev->in_urb = usb_alloc_urb(0, GFP_KERNEL); + dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); + + if (!dev->in_urb || !dev->out_urb) { + nfc_err(&interface->dev, "Could not allocate USB URBs\n"); + rc = -ENOMEM; + goto error; + } + + usb_fill_bulk_urb(dev->in_urb, dev->udev, + usb_rcvbulkpipe(dev->udev, in_endpoint), + NULL, 0, NULL, dev); + usb_fill_bulk_urb(dev->out_urb, dev->udev, + usb_sndbulkpipe(dev->udev, out_endpoint), + NULL, 0, port100_send_complete, dev); + + dev->skb_headroom = PORT100_FRAME_HEADER_LEN + + PORT100_COMM_RF_HEAD_MAX_LEN; + dev->skb_tailroom = PORT100_FRAME_TAIL_LEN; + + INIT_WORK(&dev->cmd_complete_work, port100_wq_cmd_complete); + + /* The first thing to do with the Port-100 is to set the command type + * to be used. If supported we use command type 1. 0 otherwise. + */ + cmd_type_mask = port100_get_command_type_mask(dev); + if (!cmd_type_mask) { + nfc_err(&interface->dev, + "Could not get supported command types.\n"); + rc = -ENODEV; + goto error; + } + + if (PORT100_CMD_TYPE_IS_SUPPORTED(cmd_type_mask, PORT100_CMD_TYPE_1)) + dev->cmd_type = PORT100_CMD_TYPE_1; + else + dev->cmd_type = PORT100_CMD_TYPE_0; + + rc = port100_set_command_type(dev, dev->cmd_type); + if (rc) { + nfc_err(&interface->dev, + "The device does not support command type %u.\n", + dev->cmd_type); + goto error; + } + + fw_version = port100_get_firmware_version(dev); + if (!fw_version) + nfc_err(&interface->dev, + "Could not get device firmware version.\n"); + + nfc_info(&interface->dev, + "Sony NFC Port-100 Series attached (firmware v%x.%02x)\n", + (fw_version & 0xFF00) >> 8, fw_version & 0xFF); dev->nfc_digital_dev = nfc_digital_allocate_device(&port100_digital_ops, PORT100_PROTOCOLS, @@ -157,6 +814,10 @@ free_nfc_dev: nfc_digital_free_device(dev->nfc_digital_dev); error: + usb_free_urb(dev->in_urb); + usb_free_urb(dev->out_urb); + usb_put_dev(dev->udev); + return rc; } @@ -170,6 +831,14 @@ static void port100_disconnect(struct usb_interface *interface) nfc_digital_unregister_device(dev->nfc_digital_dev); nfc_digital_free_device(dev->nfc_digital_dev); + usb_kill_urb(dev->in_urb); + usb_kill_urb(dev->out_urb); + + usb_free_urb(dev->in_urb); + usb_free_urb(dev->out_urb); + + kfree(dev->cmd); + nfc_info(&interface->dev, "Sony Port-100 NFC device disconnected"); } |