diff options
Diffstat (limited to 'drivers/net')
24 files changed, 0 insertions, 22226 deletions
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 78a6259f5c1c..0c2bd806950e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -282,8 +282,6 @@ source "drivers/net/slip/Kconfig" source "drivers/s390/net/Kconfig" -source "drivers/net/tokenring/Kconfig" - source "drivers/net/usb/Kconfig" source "drivers/net/wireless/Kconfig" diff --git a/drivers/net/Makefile b/drivers/net/Makefile index a6b8ce11a22f..3d375ca128a6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -50,7 +50,6 @@ obj-$(CONFIG_SLIP) += slip/ obj-$(CONFIG_SLHC) += slip/ obj-$(CONFIG_NET_SB1000) += sb1000.o obj-$(CONFIG_SUNGEM_PHY) += sungem_phy.o -obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_WLAN) += wireless/ obj-$(CONFIG_WIMAX) += wimax/ diff --git a/drivers/net/Space.c b/drivers/net/Space.c index 88bbd8ffa7fe..486e2dc366e0 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -29,7 +29,6 @@ */ #include <linux/netdevice.h> #include <linux/etherdevice.h> -#include <linux/trdevice.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/netlink.h> @@ -284,46 +283,6 @@ static void __init ethif_probe2(int unit) probe_list2(unit, parport_probes, base_addr == 0)); } -#ifdef CONFIG_TR -/* Token-ring device probe */ -extern int ibmtr_probe_card(struct net_device *); -extern struct net_device *smctr_probe(int unit); - -static struct devprobe2 tr_probes2[] __initdata = { -#ifdef CONFIG_SMCTR - {smctr_probe, 0}, -#endif - {NULL, 0}, -}; - -static __init int trif_probe(int unit) -{ - int err = -ENODEV; -#ifdef CONFIG_IBMTR - struct net_device *dev = alloc_trdev(0); - if (!dev) - return -ENOMEM; - - sprintf(dev->name, "tr%d", unit); - netdev_boot_setup_check(dev); - err = ibmtr_probe_card(dev); - if (err) - free_netdev(dev); -#endif - return err; -} - -static void __init trif_probe2(int unit) -{ - unsigned long base_addr = netdev_boot_base("tr", unit); - - if (base_addr == 1) - return; - probe_list2(unit, tr_probes2, base_addr == 0); -} -#endif - - /* Statically configured drivers -- order matters here. */ static int __init net_olddevs_init(void) { @@ -333,11 +292,6 @@ static int __init net_olddevs_init(void) for (num = 0; num < 8; ++num) sbni_probe(num); #endif -#ifdef CONFIG_TR - for (num = 0; num < 8; ++num) - if (!trif_probe(num)) - trif_probe2(num); -#endif for (num = 0; num < 8; ++num) ethif_probe2(num); diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c deleted file mode 100644 index 0924f572f59b..000000000000 --- a/drivers/net/tokenring/3c359.c +++ /dev/null @@ -1,1831 +0,0 @@ -/* - * 3c359.c (c) 2000 Mike Phillips (mikep@linuxtr.net) All Rights Reserved - * - * Linux driver for 3Com 3c359 Tokenlink Velocity XL PCI NIC - * - * Base Driver Olympic: - * Written 1999 Peter De Schrijver & Mike Phillips - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * 7/17/00 - Clean up, version number 0.9.0. Ready to release to the world. - * - * 2/16/01 - Port up to kernel 2.4.2 ready for submission into the kernel. - * 3/05/01 - Last clean up stuff before submission. - * 2/15/01 - Finally, update to new pci api. - * - * To Do: - */ - -/* - * Technical Card Details - * - * All access to data is done with 16/8 bit transfers. The transfer - * method really sucks. You can only read or write one location at a time. - * - * Also, the microcode for the card must be uploaded if the card does not have - * the flashrom on board. This is a 28K bloat in the driver when compiled - * as a module. - * - * Rx is very simple, status into a ring of descriptors, dma data transfer, - * interrupts to tell us when a packet is received. - * - * Tx is a little more interesting. Similar scenario, descriptor and dma data - * transfers, but we don't have to interrupt the card to tell it another packet - * is ready for transmission, we are just doing simple memory writes, not io or mmio - * writes. The card can be set up to simply poll on the next - * descriptor pointer and when this value is non-zero will automatically download - * the next packet. The card then interrupts us when the packet is done. - * - */ - -#define XL_DEBUG 0 - -#include <linux/jiffies.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/timer.h> -#include <linux/in.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/ptrace.h> -#include <linux/skbuff.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> -#include <linux/firmware.h> -#include <linux/slab.h> - -#include <net/checksum.h> - -#include <asm/io.h> - -#include "3c359.h" - -static char version[] __devinitdata = -"3c359.c v1.2.0 2/17/01 - Mike Phillips (mikep@linuxtr.net)" ; - -#define FW_NAME "3com/3C359.bin" -MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; -MODULE_DESCRIPTION("3Com 3C359 Velocity XL Token Ring Adapter Driver\n") ; -MODULE_FIRMWARE(FW_NAME); - -/* Module parameters */ - -/* Ring Speed 0,4,16 - * 0 = Autosense - * 4,16 = Selected speed only, no autosense - * This allows the card to be the first on the ring - * and become the active monitor. - * - * WARNING: Some hubs will allow you to insert - * at the wrong speed. - * - * The adapter will _not_ fail to open if there are no - * active monitors on the ring, it will simply open up in - * its last known ringspeed if no ringspeed is specified. - */ - -static int ringspeed[XL_MAX_ADAPTERS] = {0,} ; - -module_param_array(ringspeed, int, NULL, 0); -MODULE_PARM_DESC(ringspeed,"3c359: Ringspeed selection - 4,16 or 0") ; - -/* Packet buffer size */ - -static int pkt_buf_sz[XL_MAX_ADAPTERS] = {0,} ; - -module_param_array(pkt_buf_sz, int, NULL, 0) ; -MODULE_PARM_DESC(pkt_buf_sz,"3c359: Initial buffer size") ; -/* Message Level */ - -static int message_level[XL_MAX_ADAPTERS] = {0,} ; - -module_param_array(message_level, int, NULL, 0) ; -MODULE_PARM_DESC(message_level, "3c359: Level of reported messages") ; -/* - * This is a real nasty way of doing this, but otherwise you - * will be stuck with 1555 lines of hex #'s in the code. - */ - -static DEFINE_PCI_DEVICE_TABLE(xl_pci_tbl) = -{ - {PCI_VENDOR_ID_3COM,PCI_DEVICE_ID_3COM_3C359, PCI_ANY_ID, PCI_ANY_ID, }, - { } /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci,xl_pci_tbl) ; - -static int xl_init(struct net_device *dev); -static int xl_open(struct net_device *dev); -static int xl_open_hw(struct net_device *dev) ; -static int xl_hw_reset(struct net_device *dev); -static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev); -static void xl_dn_comp(struct net_device *dev); -static int xl_close(struct net_device *dev); -static void xl_set_rx_mode(struct net_device *dev); -static irqreturn_t xl_interrupt(int irq, void *dev_id); -static int xl_set_mac_address(struct net_device *dev, void *addr) ; -static void xl_arb_cmd(struct net_device *dev); -static void xl_asb_cmd(struct net_device *dev) ; -static void xl_srb_cmd(struct net_device *dev, int srb_cmd) ; -static void xl_wait_misr_flags(struct net_device *dev) ; -static int xl_change_mtu(struct net_device *dev, int mtu); -static void xl_srb_bh(struct net_device *dev) ; -static void xl_asb_bh(struct net_device *dev) ; -static void xl_reset(struct net_device *dev) ; -static void xl_freemem(struct net_device *dev) ; - - -/* EEProm Access Functions */ -static u16 xl_ee_read(struct net_device *dev, int ee_addr) ; -static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value) ; - -/* Debugging functions */ -#if XL_DEBUG -static void print_tx_state(struct net_device *dev) ; -static void print_rx_state(struct net_device *dev) ; - -static void print_tx_state(struct net_device *dev) -{ - - struct xl_private *xl_priv = netdev_priv(dev); - struct xl_tx_desc *txd ; - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - int i ; - - printk("tx_ring_head: %d, tx_ring_tail: %d, free_ent: %d\n",xl_priv->tx_ring_head, - xl_priv->tx_ring_tail, xl_priv->free_ring_entries) ; - printk("Ring , Address , FSH , DnNextPtr, Buffer, Buffer_Len\n"); - for (i = 0; i < 16; i++) { - txd = &(xl_priv->xl_tx_ring[i]) ; - printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(txd), - txd->framestartheader, txd->dnnextptr, txd->buffer, txd->buffer_length ) ; - } - - printk("DNLISTPTR = %04x\n", readl(xl_mmio + MMIO_DNLISTPTR) ); - - printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL) ); - printk("Queue status = %0x\n",netif_running(dev) ) ; -} - -static void print_rx_state(struct net_device *dev) -{ - - struct xl_private *xl_priv = netdev_priv(dev); - struct xl_rx_desc *rxd ; - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - int i ; - - printk("rx_ring_tail: %d\n", xl_priv->rx_ring_tail); - printk("Ring , Address , FrameState , UPNextPtr, FragAddr, Frag_Len\n"); - for (i = 0; i < 16; i++) { - /* rxd = (struct xl_rx_desc *)xl_priv->rx_ring_dma_addr + (i * sizeof(struct xl_rx_desc)) ; */ - rxd = &(xl_priv->xl_rx_ring[i]) ; - printk("%d, %08lx, %08x, %08x, %08x, %08x\n", i, virt_to_bus(rxd), - rxd->framestatus, rxd->upnextptr, rxd->upfragaddr, rxd->upfraglen ) ; - } - - printk("UPLISTPTR = %04x\n", readl(xl_mmio + MMIO_UPLISTPTR)); - - printk("DmaCtl = %04x\n", readl(xl_mmio + MMIO_DMA_CTRL)); - printk("Queue status = %0x\n",netif_running(dev)); -} -#endif - -/* - * Read values from the on-board EEProm. This looks very strange - * but you have to wait for the EEProm to get/set the value before - * passing/getting the next value from the nic. As with all requests - * on this nic it has to be done in two stages, a) tell the nic which - * memory address you want to access and b) pass/get the value from the nic. - * With the EEProm, you have to wait before and between access a) and b). - * As this is only read at initialization time and the wait period is very - * small we shouldn't have to worry about scheduling issues. - */ - -static u16 xl_ee_read(struct net_device *dev, int ee_addr) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - - /* Wait for EEProm to not be busy */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - /* Tell EEProm what we want to do and where */ - writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ; - - /* Wait for EEProm to not be busy */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - /* Tell EEProm what we want to do and where */ - writel(IO_WORD_WRITE | EECONTROL , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(EEREAD + ee_addr, xl_mmio + MMIO_MACDATA) ; - - /* Finally read the value from the EEProm */ - writel(IO_WORD_READ | EEDATA , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - return readw(xl_mmio + MMIO_MACDATA) ; -} - -/* - * Write values to the onboard eeprom. As with eeprom read you need to - * set which location to write, wait, value to write, wait, with the - * added twist of having to enable eeprom writes as well. - */ - -static void xl_ee_write(struct net_device *dev, int ee_addr, u16 ee_value) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - - /* Wait for EEProm to not be busy */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - /* Enable write/erase */ - writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(EE_ENABLE_WRITE, xl_mmio + MMIO_MACDATA) ; - - /* Wait for EEProm to not be busy */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - /* Put the value we want to write into EEDATA */ - writel(IO_WORD_WRITE | EEDATA, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(ee_value, xl_mmio + MMIO_MACDATA) ; - - /* Tell EEProm to write eevalue into ee_addr */ - writel(IO_WORD_WRITE | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(EEWRITE + ee_addr, xl_mmio + MMIO_MACDATA) ; - - /* Wait for EEProm to not be busy, to ensure write gets done */ - writel(IO_WORD_READ | EECONTROL, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while ( readw(xl_mmio + MMIO_MACDATA) & EEBUSY ) ; - - return ; -} - -static const struct net_device_ops xl_netdev_ops = { - .ndo_open = xl_open, - .ndo_stop = xl_close, - .ndo_start_xmit = xl_xmit, - .ndo_change_mtu = xl_change_mtu, - .ndo_set_rx_mode = xl_set_rx_mode, - .ndo_set_mac_address = xl_set_mac_address, -}; - -static int __devinit xl_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev ; - struct xl_private *xl_priv ; - static int card_no = -1 ; - int i ; - - card_no++ ; - - if (pci_enable_device(pdev)) { - return -ENODEV ; - } - - pci_set_master(pdev); - - if ((i = pci_request_regions(pdev,"3c359"))) { - return i ; - } - - /* - * Allowing init_trdev to allocate the private data will align - * xl_private on a 32 bytes boundary which we need for the rx/tx - * descriptors - */ - - dev = alloc_trdev(sizeof(struct xl_private)) ; - if (!dev) { - pci_release_regions(pdev) ; - return -ENOMEM ; - } - xl_priv = netdev_priv(dev); - -#if XL_DEBUG - printk("pci_device: %p, dev:%p, dev->priv: %p, ba[0]: %10x, ba[1]:%10x\n", - pdev, dev, netdev_priv(dev), (unsigned int)pdev->resource[0].start, (unsigned int)pdev->resource[1].start); -#endif - - dev->irq=pdev->irq; - dev->base_addr=pci_resource_start(pdev,0) ; - xl_priv->xl_card_name = pci_name(pdev); - xl_priv->xl_mmio=ioremap(pci_resource_start(pdev,1), XL_IO_SPACE); - xl_priv->pdev = pdev ; - - if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) ) - xl_priv->pkt_buf_sz = PKT_BUF_SZ ; - else - xl_priv->pkt_buf_sz = pkt_buf_sz[card_no] ; - - dev->mtu = xl_priv->pkt_buf_sz - TR_HLEN ; - xl_priv->xl_ring_speed = ringspeed[card_no] ; - xl_priv->xl_message_level = message_level[card_no] ; - xl_priv->xl_functional_addr[0] = xl_priv->xl_functional_addr[1] = xl_priv->xl_functional_addr[2] = xl_priv->xl_functional_addr[3] = 0 ; - xl_priv->xl_copy_all_options = 0 ; - - if((i = xl_init(dev))) { - iounmap(xl_priv->xl_mmio) ; - free_netdev(dev) ; - pci_release_regions(pdev) ; - return i ; - } - - dev->netdev_ops = &xl_netdev_ops; - SET_NETDEV_DEV(dev, &pdev->dev); - - pci_set_drvdata(pdev,dev) ; - if ((i = register_netdev(dev))) { - printk(KERN_ERR "3C359, register netdev failed\n") ; - pci_set_drvdata(pdev,NULL) ; - iounmap(xl_priv->xl_mmio) ; - free_netdev(dev) ; - pci_release_regions(pdev) ; - return i ; - } - - printk(KERN_INFO "3C359: %s registered as: %s\n",xl_priv->xl_card_name,dev->name) ; - - return 0; -} - -static int xl_init_firmware(struct xl_private *xl_priv) -{ - int err; - - err = request_firmware(&xl_priv->fw, FW_NAME, &xl_priv->pdev->dev); - if (err) { - printk(KERN_ERR "Failed to load firmware \"%s\"\n", FW_NAME); - return err; - } - - if (xl_priv->fw->size < 16) { - printk(KERN_ERR "Bogus length %zu in \"%s\"\n", - xl_priv->fw->size, FW_NAME); - release_firmware(xl_priv->fw); - err = -EINVAL; - } - - return err; -} - -static int __devinit xl_init(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - int err; - - printk(KERN_INFO "%s\n", version); - printk(KERN_INFO "%s: I/O at %hx, MMIO at %p, using irq %d\n", - xl_priv->xl_card_name, (unsigned int)dev->base_addr ,xl_priv->xl_mmio, dev->irq); - - spin_lock_init(&xl_priv->xl_lock) ; - - err = xl_init_firmware(xl_priv); - if (err == 0) - err = xl_hw_reset(dev); - - return err; -} - - -/* - * Hardware reset. This needs to be a separate entity as we need to reset the card - * when we change the EEProm settings. - */ - -static int xl_hw_reset(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - unsigned long t ; - u16 i ; - u16 result_16 ; - u8 result_8 ; - u16 start ; - int j ; - - if (xl_priv->fw == NULL) - return -EINVAL; - - /* - * Reset the card. If the card has got the microcode on board, we have - * missed the initialization interrupt, so we must always do this. - */ - - writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ; - - /* - * Must wait for cmdInProgress bit (12) to clear before continuing with - * card configuration. - */ - - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 40 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL card not responding to global reset.\n", dev->name); - return -ENODEV; - } - } - - /* - * Enable pmbar by setting bit in CPAttention - */ - - writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - result_8 = readb(xl_mmio + MMIO_MACDATA) ; - result_8 = result_8 | CPA_PMBARVIS ; - writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(result_8, xl_mmio + MMIO_MACDATA) ; - - /* - * Read cpHold bit in pmbar, if cleared we have got Flashrom on board. - * If not, we need to upload the microcode to the card - */ - - writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD); - -#if XL_DEBUG - printk(KERN_INFO "Read from PMBAR = %04x\n", readw(xl_mmio + MMIO_MACDATA)); -#endif - - if ( readw( (xl_mmio + MMIO_MACDATA)) & PMB_CPHOLD ) { - - /* Set PmBar, privateMemoryBase bits (8:2) to 0 */ - - writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD); - result_16 = readw(xl_mmio + MMIO_MACDATA) ; - result_16 = result_16 & ~((0x7F) << 2) ; - writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(result_16,xl_mmio + MMIO_MACDATA) ; - - /* Set CPAttention, memWrEn bit */ - - writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - result_8 = readb(xl_mmio + MMIO_MACDATA) ; - result_8 = result_8 | CPA_MEMWREN ; - writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(result_8, xl_mmio + MMIO_MACDATA) ; - - /* - * Now to write the microcode into the shared ram - * The microcode must finish at position 0xFFFF, - * so we must subtract to get the start position for the code - * - * Looks strange but ensures compiler only uses - * 16 bit unsigned int - */ - start = (0xFFFF - (xl_priv->fw->size) + 1) ; - - printk(KERN_INFO "3C359: Uploading Microcode: "); - - for (i = start, j = 0; j < xl_priv->fw->size; i++, j++) { - writel(MEM_BYTE_WRITE | 0XD0000 | i, - xl_mmio + MMIO_MAC_ACCESS_CMD); - writeb(xl_priv->fw->data[j], xl_mmio + MMIO_MACDATA); - if (j % 1024 == 0) - printk("."); - } - printk("\n") ; - - for (i = 0; i < 16; i++) { - writel((MEM_BYTE_WRITE | 0xDFFF0) + i, - xl_mmio + MMIO_MAC_ACCESS_CMD); - writeb(xl_priv->fw->data[xl_priv->fw->size - 16 + i], - xl_mmio + MMIO_MACDATA); - } - - /* - * Have to write the start address of the upload to FFF4, but - * the address must be >> 4. You do not want to know how long - * it took me to discover this. - */ - - writel(MEM_WORD_WRITE | 0xDFFF4, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(start >> 4, xl_mmio + MMIO_MACDATA); - - /* Clear the CPAttention, memWrEn Bit */ - - writel( (IO_BYTE_READ | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - result_8 = readb(xl_mmio + MMIO_MACDATA) ; - result_8 = result_8 & ~CPA_MEMWREN ; - writel( (IO_BYTE_WRITE | CPATTENTION), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(result_8, xl_mmio + MMIO_MACDATA) ; - - /* Clear the cpHold bit in pmbar */ - - writel( (IO_WORD_READ | PMBAR),xl_mmio + MMIO_MAC_ACCESS_CMD); - result_16 = readw(xl_mmio + MMIO_MACDATA) ; - result_16 = result_16 & ~PMB_CPHOLD ; - writel( (IO_WORD_WRITE | PMBAR), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(result_16,xl_mmio + MMIO_MACDATA) ; - - - } /* If microcode upload required */ - - /* - * The card should now go though a self test procedure and get itself ready - * to be opened, we must wait for an srb response with the initialization - * information. - */ - -#if XL_DEBUG - printk(KERN_INFO "%s: Microcode uploaded, must wait for the self test to complete\n", dev->name); -#endif - - writew(SETINDENABLE | 0xFFF, xl_mmio + MMIO_COMMAND) ; - - t=jiffies; - while ( !(readw(xl_mmio + MMIO_INTSTATUS_AUTO) & INTSTAT_SRB) ) { - schedule(); - if (time_after(jiffies, t + 15 * HZ)) { - printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n"); - return -ENODEV; - } - } - - /* - * Write the RxBufArea with D000, RxEarlyThresh, TxStartThresh, - * DnPriReqThresh, read the tech docs if you want to know what - * values they need to be. - */ - - writel(MMIO_WORD_WRITE | RXBUFAREA, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(0xD000, xl_mmio + MMIO_MACDATA) ; - - writel(MMIO_WORD_WRITE | RXEARLYTHRESH, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(0X0020, xl_mmio + MMIO_MACDATA) ; - - writew( SETTXSTARTTHRESH | 0x40 , xl_mmio + MMIO_COMMAND) ; - - writeb(0x04, xl_mmio + MMIO_DNBURSTTHRESH) ; - writeb(0x04, xl_mmio + DNPRIREQTHRESH) ; - - /* - * Read WRBR to provide the location of the srb block, have to use byte reads not word reads. - * Tech docs have this wrong !!!! - */ - - writel(MMIO_BYTE_READ | WRBR, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->srb = readb(xl_mmio + MMIO_MACDATA) << 8 ; - writel( (MMIO_BYTE_READ | WRBR) + 1, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->srb = xl_priv->srb | readb(xl_mmio + MMIO_MACDATA) ; - -#if XL_DEBUG - writel(IO_WORD_READ | SWITCHSETTINGS, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if ( readw(xl_mmio + MMIO_MACDATA) & 2) { - printk(KERN_INFO "Default ring speed 4 mbps\n"); - } else { - printk(KERN_INFO "Default ring speed 16 mbps\n"); - } - printk(KERN_INFO "%s: xl_priv->srb = %04x\n",xl_priv->xl_card_name, xl_priv->srb); -#endif - - return 0; -} - -static int xl_open(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - u8 i ; - __le16 hwaddr[3] ; /* Should be u8[6] but we get word return values */ - int open_err ; - - u16 switchsettings, switchsettings_eeprom ; - - if (request_irq(dev->irq, xl_interrupt, IRQF_SHARED , "3c359", dev)) - return -EAGAIN; - - /* - * Read the information from the EEPROM that we need. - */ - - hwaddr[0] = cpu_to_le16(xl_ee_read(dev,0x10)); - hwaddr[1] = cpu_to_le16(xl_ee_read(dev,0x11)); - hwaddr[2] = cpu_to_le16(xl_ee_read(dev,0x12)); - - /* Ring speed */ - - switchsettings_eeprom = xl_ee_read(dev,0x08) ; - switchsettings = switchsettings_eeprom ; - - if (xl_priv->xl_ring_speed != 0) { - if (xl_priv->xl_ring_speed == 4) - switchsettings = switchsettings | 0x02 ; - else - switchsettings = switchsettings & ~0x02 ; - } - - /* Only write EEProm if there has been a change */ - if (switchsettings != switchsettings_eeprom) { - xl_ee_write(dev,0x08,switchsettings) ; - /* Hardware reset after changing EEProm */ - xl_hw_reset(dev) ; - } - - memcpy(dev->dev_addr,hwaddr,dev->addr_len) ; - - open_err = xl_open_hw(dev) ; - - /* - * This really needs to be cleaned up with better error reporting. - */ - - if (open_err != 0) { /* Something went wrong with the open command */ - if (open_err & 0x07) { /* Wrong speed, retry at different speed */ - printk(KERN_WARNING "%s: Open Error, retrying at different ringspeed\n", dev->name); - switchsettings = switchsettings ^ 2 ; - xl_ee_write(dev,0x08,switchsettings) ; - xl_hw_reset(dev) ; - open_err = xl_open_hw(dev) ; - if (open_err != 0) { - printk(KERN_WARNING "%s: Open error returned a second time, we're bombing out now\n", dev->name); - free_irq(dev->irq,dev) ; - return -ENODEV ; - } - } else { - printk(KERN_WARNING "%s: Open Error = %04x\n", dev->name, open_err) ; - free_irq(dev->irq,dev) ; - return -ENODEV ; - } - } - - /* - * Now to set up the Rx and Tx buffer structures - */ - /* These MUST be on 8 byte boundaries */ - xl_priv->xl_tx_ring = kzalloc((sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE) + 7, GFP_DMA | GFP_KERNEL); - if (xl_priv->xl_tx_ring == NULL) { - free_irq(dev->irq,dev); - return -ENOMEM; - } - xl_priv->xl_rx_ring = kzalloc((sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE) +7, GFP_DMA | GFP_KERNEL); - if (xl_priv->xl_rx_ring == NULL) { - free_irq(dev->irq,dev); - kfree(xl_priv->xl_tx_ring); - return -ENOMEM; - } - - /* Setup Rx Ring */ - for (i=0 ; i < XL_RX_RING_SIZE ; i++) { - struct sk_buff *skb ; - - skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ; - if (skb==NULL) - break ; - - skb->dev = dev ; - xl_priv->xl_rx_ring[i].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); - xl_priv->xl_rx_ring[i].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG; - xl_priv->rx_ring_skb[i] = skb ; - } - - if (i==0) { - printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name); - free_irq(dev->irq,dev) ; - kfree(xl_priv->xl_tx_ring); - kfree(xl_priv->xl_rx_ring); - return -EIO ; - } - - xl_priv->rx_ring_no = i ; - xl_priv->rx_ring_tail = 0 ; - xl_priv->rx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_rx_ring, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_TODEVICE) ; - for (i=0;i<(xl_priv->rx_ring_no-1);i++) { - xl_priv->xl_rx_ring[i].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * (i+1))); - } - xl_priv->xl_rx_ring[i].upnextptr = 0 ; - - writel(xl_priv->rx_ring_dma_addr, xl_mmio + MMIO_UPLISTPTR) ; - - /* Setup Tx Ring */ - - xl_priv->tx_ring_dma_addr = pci_map_single(xl_priv->pdev,xl_priv->xl_tx_ring, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE,PCI_DMA_TODEVICE) ; - - xl_priv->tx_ring_head = 1 ; - xl_priv->tx_ring_tail = 255 ; /* Special marker for first packet */ - xl_priv->free_ring_entries = XL_TX_RING_SIZE ; - - /* - * Setup the first dummy DPD entry for polling to start working. - */ - - xl_priv->xl_tx_ring[0].framestartheader = TXDPDEMPTY; - xl_priv->xl_tx_ring[0].buffer = 0 ; - xl_priv->xl_tx_ring[0].buffer_length = 0 ; - xl_priv->xl_tx_ring[0].dnnextptr = 0 ; - - writel(xl_priv->tx_ring_dma_addr, xl_mmio + MMIO_DNLISTPTR) ; - writel(DNUNSTALL, xl_mmio + MMIO_COMMAND) ; - writel(UPUNSTALL, xl_mmio + MMIO_COMMAND) ; - writel(DNENABLE, xl_mmio + MMIO_COMMAND) ; - writeb(0x40, xl_mmio + MMIO_DNPOLL) ; - - /* - * Enable interrupts on the card - */ - - writel(SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ; - writel(SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ; - - netif_start_queue(dev) ; - return 0; - -} - -static int xl_open_hw(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem *xl_mmio = xl_priv->xl_mmio ; - u16 vsoff ; - char ver_str[33]; - int open_err ; - int i ; - unsigned long t ; - - /* - * Okay, let's build up the Open.NIC srb command - * - */ - - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(OPEN_NIC, xl_mmio + MMIO_MACDATA) ; - - /* - * Use this as a test byte, if it comes back with the same value, the command didn't work - */ - - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb)+ 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0xff,xl_mmio + MMIO_MACDATA) ; - - /* Open options */ - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x00, xl_mmio + MMIO_MACDATA) ; - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + 9, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x00, xl_mmio + MMIO_MACDATA) ; - - /* - * Node address, be careful here, the docs say you can just put zeros here and it will use - * the hardware address, it doesn't, you must include the node address in the open command. - */ - - if (xl_priv->xl_laa[0]) { /* If using a LAA address */ - for (i=10;i<16;i++) { - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_laa[i-10],xl_mmio + MMIO_MACDATA) ; - } - memcpy(dev->dev_addr,xl_priv->xl_laa,dev->addr_len) ; - } else { /* Regular hardware address */ - for (i=10;i<16;i++) { - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(dev->dev_addr[i-10], xl_mmio + MMIO_MACDATA) ; - } - } - - /* Default everything else to 0 */ - for (i = 16; i < 34; i++) { - writel( (MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x00,xl_mmio + MMIO_MACDATA) ; - } - - /* - * Set the csrb bit in the MISR register - */ - - xl_wait_misr_flags(dev) ; - writel(MEM_BYTE_WRITE | MF_CSRB, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0xFF, xl_mmio + MMIO_MACDATA) ; - writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(MISR_CSRB , xl_mmio + MMIO_MACDATA) ; - - /* - * Now wait for the command to run - */ - - t=jiffies; - while (! (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) { - schedule(); - if (time_after(jiffies, t + 40 * HZ)) { - printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n"); - break ; - } - } - - /* - * Let's interpret the open response - */ - - writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb)+2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if (readb(xl_mmio + MMIO_MACDATA)!=0) { - open_err = readb(xl_mmio + MMIO_MACDATA) << 8 ; - writel( (MEM_BYTE_READ | 0xD0000 | xl_priv->srb) + 7, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - open_err |= readb(xl_mmio + MMIO_MACDATA) ; - return open_err ; - } else { - writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 8, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->asb = swab16(readw(xl_mmio + MMIO_MACDATA)) ; - printk(KERN_INFO "%s: Adapter Opened Details: ",dev->name) ; - printk("ASB: %04x",xl_priv->asb ) ; - writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 10, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - printk(", SRB: %04x",swab16(readw(xl_mmio + MMIO_MACDATA)) ) ; - - writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 12, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->arb = swab16(readw(xl_mmio + MMIO_MACDATA)) ; - printk(", ARB: %04x\n",xl_priv->arb ); - writel( (MEM_WORD_READ | 0xD0000 | xl_priv->srb) + 14, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - vsoff = swab16(readw(xl_mmio + MMIO_MACDATA)) ; - - /* - * Interesting, sending the individual characters directly to printk was causing klogd to use - * use 100% of processor time, so we build up the string and print that instead. - */ - - for (i=0;i<0x20;i++) { - writel( (MEM_BYTE_READ | 0xD0000 | vsoff) + i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - ver_str[i] = readb(xl_mmio + MMIO_MACDATA) ; - } - ver_str[i] = '\0' ; - printk(KERN_INFO "%s: Microcode version String: %s\n",dev->name,ver_str); - } - - /* - * Issue the AckInterrupt - */ - writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - - return 0 ; -} - -/* - * There are two ways of implementing rx on the 359 NIC, either - * interrupt driven or polling. We are going to uses interrupts, - * it is the easier way of doing things. - * - * The Rx works with a ring of Rx descriptors. At initialise time the ring - * entries point to the next entry except for the last entry in the ring - * which points to 0. The card is programmed with the location of the first - * available descriptor and keeps reading the next_ptr until next_ptr is set - * to 0. Hopefully with a ring size of 16 the card will never get to read a next_ptr - * of 0. As the Rx interrupt is received we copy the frame up to the protocol layers - * and then point the end of the ring to our current position and point our current - * position to 0, therefore making the current position the last position on the ring. - * The last position on the ring therefore loops continually loops around the rx ring. - * - * rx_ring_tail is the position on the ring to process next. (Think of a snake, the head - * expands as the card adds new packets and we go around eating the tail processing the - * packets.) - * - * Undoubtably it could be streamlined and improved upon, but at the moment it works - * and the fast path through the routine is fine. - * - * adv_rx_ring could be inlined to increase performance, but its called a *lot* of times - * in xl_rx so would increase the size of the function significantly. - */ - -static void adv_rx_ring(struct net_device *dev) /* Advance rx_ring, cut down on bloat in xl_rx */ -{ - struct xl_private *xl_priv=netdev_priv(dev); - int n = xl_priv->rx_ring_tail; - int prev_ring_loc; - - prev_ring_loc = (n + XL_RX_RING_SIZE - 1) & (XL_RX_RING_SIZE - 1); - xl_priv->xl_rx_ring[prev_ring_loc].upnextptr = cpu_to_le32(xl_priv->rx_ring_dma_addr + (sizeof (struct xl_rx_desc) * n)); - xl_priv->xl_rx_ring[n].framestatus = 0; - xl_priv->xl_rx_ring[n].upnextptr = 0; - xl_priv->rx_ring_tail++; - xl_priv->rx_ring_tail &= (XL_RX_RING_SIZE-1); -} - -static void xl_rx(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - struct sk_buff *skb, *skb2 ; - int frame_length = 0, copy_len = 0 ; - int temp_ring_loc ; - - /* - * Receive the next frame, loop around the ring until all frames - * have been received. - */ - - while (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & (RXUPDCOMPLETE | RXUPDFULL) ) { /* Descriptor to process */ - - if (xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus & RXUPDFULL ) { /* UpdFull, Multiple Descriptors used for the frame */ - - /* - * This is a pain, you need to go through all the descriptors until the last one - * for this frame to find the framelength - */ - - temp_ring_loc = xl_priv->rx_ring_tail ; - - while (xl_priv->xl_rx_ring[temp_ring_loc].framestatus & RXUPDFULL ) { - temp_ring_loc++ ; - temp_ring_loc &= (XL_RX_RING_SIZE-1) ; - } - - frame_length = le32_to_cpu(xl_priv->xl_rx_ring[temp_ring_loc].framestatus) & 0x7FFF; - - skb = dev_alloc_skb(frame_length) ; - - if (skb==NULL) { /* No memory for frame, still need to roll forward the rx ring */ - printk(KERN_WARNING "%s: dev_alloc_skb failed - multi buffer !\n", dev->name) ; - while (xl_priv->rx_ring_tail != temp_ring_loc) - adv_rx_ring(dev) ; - - adv_rx_ring(dev) ; /* One more time just for luck :) */ - dev->stats.rx_dropped++ ; - - writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; - return ; - } - - while (xl_priv->rx_ring_tail != temp_ring_loc) { - copy_len = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen) & 0x7FFF; - frame_length -= copy_len ; - pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE); - skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail], - skb_put(skb, copy_len), - copy_len); - pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE); - adv_rx_ring(dev) ; - } - - /* Now we have found the last fragment */ - pci_dma_sync_single_for_cpu(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE); - skb_copy_from_linear_data(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail], - skb_put(skb,copy_len), frame_length); -/* memcpy(skb_put(skb,frame_length), bus_to_virt(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), frame_length) ; */ - pci_dma_sync_single_for_device(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE); - adv_rx_ring(dev) ; - skb->protocol = tr_type_trans(skb,dev) ; - netif_rx(skb) ; - - } else { /* Single Descriptor Used, simply swap buffers over, fast path */ - - frame_length = le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].framestatus) & 0x7FFF; - - skb = dev_alloc_skb(xl_priv->pkt_buf_sz) ; - - if (skb==NULL) { /* Still need to fix the rx ring */ - printk(KERN_WARNING "%s: dev_alloc_skb failed in rx, single buffer\n",dev->name); - adv_rx_ring(dev) ; - dev->stats.rx_dropped++ ; - writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; - return ; - } - - skb2 = xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] ; - pci_unmap_single(xl_priv->pdev, le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr), xl_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - skb_put(skb2, frame_length) ; - skb2->protocol = tr_type_trans(skb2,dev) ; - - xl_priv->rx_ring_skb[xl_priv->rx_ring_tail] = skb ; - xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr = cpu_to_le32(pci_map_single(xl_priv->pdev,skb->data,xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); - xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfraglen = cpu_to_le32(xl_priv->pkt_buf_sz) | RXUPLASTFRAG; - adv_rx_ring(dev) ; - dev->stats.rx_packets++ ; - dev->stats.rx_bytes += frame_length ; - - netif_rx(skb2) ; - } /* if multiple buffers */ - } /* while packet to do */ - - /* Clear the updComplete interrupt */ - writel(ACK_INTERRUPT | UPCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; - return ; -} - -/* - * This is ruthless, it doesn't care what state the card is in it will - * completely reset the adapter. - */ - -static void xl_reset(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - unsigned long t; - - writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ; - - /* - * Must wait for cmdInProgress bit (12) to clear before continuing with - * card configuration. - */ - - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - if (time_after(jiffies, t + 40 * HZ)) { - printk(KERN_ERR "3COM 3C359 Velocity XL card not responding.\n"); - break ; - } - } - -} - -static void xl_freemem(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - int i ; - - for (i=0;i<XL_RX_RING_SIZE;i++) { - dev_kfree_skb_irq(xl_priv->rx_ring_skb[xl_priv->rx_ring_tail]) ; - pci_unmap_single(xl_priv->pdev,le32_to_cpu(xl_priv->xl_rx_ring[xl_priv->rx_ring_tail].upfragaddr),xl_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE); - xl_priv->rx_ring_tail++ ; - xl_priv->rx_ring_tail &= XL_RX_RING_SIZE-1; - } - - /* unmap ring */ - pci_unmap_single(xl_priv->pdev,xl_priv->rx_ring_dma_addr, sizeof(struct xl_rx_desc) * XL_RX_RING_SIZE, PCI_DMA_FROMDEVICE) ; - - pci_unmap_single(xl_priv->pdev,xl_priv->tx_ring_dma_addr, sizeof(struct xl_tx_desc) * XL_TX_RING_SIZE, PCI_DMA_TODEVICE) ; - - kfree(xl_priv->xl_rx_ring) ; - kfree(xl_priv->xl_tx_ring) ; - - return ; -} - -static irqreturn_t xl_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct xl_private *xl_priv =netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - u16 intstatus, macstatus ; - - intstatus = readw(xl_mmio + MMIO_INTSTATUS) ; - - if (!(intstatus & 1)) /* We didn't generate the interrupt */ - return IRQ_NONE; - - spin_lock(&xl_priv->xl_lock) ; - - /* - * Process the interrupt - */ - /* - * Something fishy going on here, we shouldn't get 0001 ints, not fatal though. - */ - if (intstatus == 0x0001) { - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - printk(KERN_INFO "%s: 00001 int received\n",dev->name); - } else { - if (intstatus & (HOSTERRINT | SRBRINT | ARBCINT | UPCOMPINT | DNCOMPINT | HARDERRINT | (1<<8) | TXUNDERRUN | ASBFINT)) { - - /* - * Host Error. - * It may be possible to recover from this, but usually it means something - * is seriously fubar, so we just close the adapter. - */ - - if (intstatus & HOSTERRINT) { - printk(KERN_WARNING "%s: Host Error, performing global reset, intstatus = %04x\n",dev->name,intstatus); - writew( GLOBAL_RESET, xl_mmio + MMIO_COMMAND ) ; - printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name); - netif_stop_queue(dev) ; - xl_freemem(dev) ; - free_irq(dev->irq,dev); - xl_reset(dev) ; - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - spin_unlock(&xl_priv->xl_lock) ; - return IRQ_HANDLED; - } /* Host Error */ - - if (intstatus & SRBRINT ) { /* Srbc interrupt */ - writel(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - if (xl_priv->srb_queued) - xl_srb_bh(dev) ; - } /* SRBR Interrupt */ - - if (intstatus & TXUNDERRUN) { /* Issue DnReset command */ - writel(DNRESET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { /* Wait for command to run */ - /* !!! FIX-ME !!!! - Must put a timeout check here ! */ - /* Empty Loop */ - } - printk(KERN_WARNING "%s: TX Underrun received\n",dev->name); - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - } /* TxUnderRun */ - - if (intstatus & ARBCINT ) { /* Arbc interrupt */ - xl_arb_cmd(dev) ; - } /* Arbc */ - - if (intstatus & ASBFINT) { - if (xl_priv->asb_queued == 1) { - xl_asb_cmd(dev) ; - } else if (xl_priv->asb_queued == 2) { - xl_asb_bh(dev) ; - } else { - writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ; - } - } /* Asbf */ - - if (intstatus & UPCOMPINT ) /* UpComplete */ - xl_rx(dev) ; - - if (intstatus & DNCOMPINT ) /* DnComplete */ - xl_dn_comp(dev) ; - - if (intstatus & HARDERRINT ) { /* Hardware error */ - writel(MMIO_WORD_READ | MACSTATUS, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - macstatus = readw(xl_mmio + MMIO_MACDATA) ; - printk(KERN_WARNING "%s: MacStatusError, details: ", dev->name); - if (macstatus & (1<<14)) - printk(KERN_WARNING "tchk error: Unrecoverable error\n"); - if (macstatus & (1<<3)) - printk(KERN_WARNING "eint error: Internal watchdog timer expired\n"); - if (macstatus & (1<<2)) - printk(KERN_WARNING "aint error: Host tried to perform invalid operation\n"); - printk(KERN_WARNING "Instatus = %02x, macstatus = %02x\n",intstatus,macstatus) ; - printk(KERN_WARNING "%s: Resetting hardware:\n", dev->name); - netif_stop_queue(dev) ; - xl_freemem(dev) ; - free_irq(dev->irq,dev); - unregister_netdev(dev) ; - free_netdev(dev) ; - xl_reset(dev) ; - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - spin_unlock(&xl_priv->xl_lock) ; - return IRQ_HANDLED; - } - } else { - printk(KERN_WARNING "%s: Received Unknown interrupt : %04x\n", dev->name, intstatus); - writel(ACK_INTERRUPT | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - } - } - - /* Turn interrupts back on */ - - writel( SETINDENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ; - writel( SETINTENABLE | INT_MASK, xl_mmio + MMIO_COMMAND) ; - - spin_unlock(&xl_priv->xl_lock) ; - return IRQ_HANDLED; -} - -/* - * Tx - Polling configuration - */ - -static netdev_tx_t xl_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - struct xl_tx_desc *txd ; - int tx_head, tx_tail, tx_prev ; - unsigned long flags ; - - spin_lock_irqsave(&xl_priv->xl_lock,flags) ; - - netif_stop_queue(dev) ; - - if (xl_priv->free_ring_entries > 1 ) { - /* - * Set up the descriptor for the packet - */ - tx_head = xl_priv->tx_ring_head ; - tx_tail = xl_priv->tx_ring_tail ; - - txd = &(xl_priv->xl_tx_ring[tx_head]) ; - txd->dnnextptr = 0 ; - txd->framestartheader = cpu_to_le32(skb->len) | TXDNINDICATE; - txd->buffer = cpu_to_le32(pci_map_single(xl_priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); - txd->buffer_length = cpu_to_le32(skb->len) | TXDNFRAGLAST; - xl_priv->tx_ring_skb[tx_head] = skb ; - dev->stats.tx_packets++ ; - dev->stats.tx_bytes += skb->len ; - - /* - * Set the nextptr of the previous descriptor equal to this descriptor, add XL_TX_RING_SIZE -1 - * to ensure no negative numbers in unsigned locations. - */ - - tx_prev = (xl_priv->tx_ring_head + XL_TX_RING_SIZE - 1) & (XL_TX_RING_SIZE - 1) ; - - xl_priv->tx_ring_head++ ; - xl_priv->tx_ring_head &= (XL_TX_RING_SIZE - 1) ; - xl_priv->free_ring_entries-- ; - - xl_priv->xl_tx_ring[tx_prev].dnnextptr = cpu_to_le32(xl_priv->tx_ring_dma_addr + (sizeof (struct xl_tx_desc) * tx_head)); - - /* Sneaky, by doing a read on DnListPtr we can force the card to poll on the DnNextPtr */ - /* readl(xl_mmio + MMIO_DNLISTPTR) ; */ - - netif_wake_queue(dev) ; - - spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ; - - return NETDEV_TX_OK; - } else { - spin_unlock_irqrestore(&xl_priv->xl_lock,flags) ; - return NETDEV_TX_BUSY; - } - -} - -/* - * The NIC has told us that a packet has been downloaded onto the card, we must - * find out which packet it has done, clear the skb and information for the packet - * then advance around the ring for all transmitted packets - */ - -static void xl_dn_comp(struct net_device *dev) -{ - struct xl_private *xl_priv=netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - struct xl_tx_desc *txd ; - - - if (xl_priv->tx_ring_tail == 255) {/* First time */ - xl_priv->xl_tx_ring[0].framestartheader = 0 ; - xl_priv->xl_tx_ring[0].dnnextptr = 0 ; - xl_priv->tx_ring_tail = 1 ; - } - - while (xl_priv->xl_tx_ring[xl_priv->tx_ring_tail].framestartheader & TXDNCOMPLETE ) { - txd = &(xl_priv->xl_tx_ring[xl_priv->tx_ring_tail]) ; - pci_unmap_single(xl_priv->pdev, le32_to_cpu(txd->buffer), xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]->len, PCI_DMA_TODEVICE); - txd->framestartheader = 0 ; - txd->buffer = cpu_to_le32(0xdeadbeef); - txd->buffer_length = 0 ; - dev_kfree_skb_irq(xl_priv->tx_ring_skb[xl_priv->tx_ring_tail]) ; - xl_priv->tx_ring_tail++ ; - xl_priv->tx_ring_tail &= (XL_TX_RING_SIZE - 1) ; - xl_priv->free_ring_entries++ ; - } - - netif_wake_queue(dev) ; - - writel(ACK_INTERRUPT | DNCOMPACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; -} - -/* - * Close the adapter properly. - * This srb reply cannot be handled from interrupt context as we have - * to free the interrupt from the driver. - */ - -static int xl_close(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - unsigned long t ; - - netif_stop_queue(dev) ; - - /* - * Close the adapter, need to stall the rx and tx queues. - */ - - writew(DNSTALL, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNSTALL not responding.\n", dev->name); - break ; - } - } - writew(DNDISABLE, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNDISABLE not responding.\n", dev->name); - break ; - } - } - writew(UPSTALL, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPSTALL not responding.\n", dev->name); - break ; - } - } - - /* Turn off interrupts, we will still get the indication though - * so we can trap it - */ - - writel(SETINTENABLE, xl_mmio + MMIO_COMMAND) ; - - xl_srb_cmd(dev,CLOSE_NIC) ; - - t=jiffies; - while (!(readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_SRB)) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-CLOSENIC not responding.\n", dev->name); - break ; - } - } - /* Read the srb response from the adapter */ - - writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD); - if (readb(xl_mmio + MMIO_MACDATA) != CLOSE_NIC) { - printk(KERN_INFO "%s: CLOSE_NIC did not get a CLOSE_NIC response\n",dev->name); - } else { - writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if (readb(xl_mmio + MMIO_MACDATA)==0) { - printk(KERN_INFO "%s: Adapter has been closed\n",dev->name); - writew(ACK_INTERRUPT | SRBRACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - - xl_freemem(dev) ; - free_irq(dev->irq,dev) ; - } else { - printk(KERN_INFO "%s: Close nic command returned error code %02x\n",dev->name, readb(xl_mmio + MMIO_MACDATA)) ; - } - } - - /* Reset the upload and download logic */ - - writew(UPRESET, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-UPRESET not responding.\n", dev->name); - break ; - } - } - writew(DNRESET, xl_mmio + MMIO_COMMAND) ; - t=jiffies; - while (readw(xl_mmio + MMIO_INTSTATUS) & INTSTAT_CMD_IN_PROGRESS) { - schedule(); - if (time_after(jiffies, t + 10 * HZ)) { - printk(KERN_ERR "%s: 3COM 3C359 Velocity XL-DNRESET not responding.\n", dev->name); - break ; - } - } - xl_hw_reset(dev) ; - return 0 ; -} - -static void xl_set_rx_mode(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - struct netdev_hw_addr *ha; - unsigned char dev_mc_address[4] ; - u16 options ; - - if (dev->flags & IFF_PROMISC) - options = 0x0004 ; - else - options = 0x0000 ; - - if (options ^ xl_priv->xl_copy_all_options) { /* Changed, must send command */ - xl_priv->xl_copy_all_options = options ; - xl_srb_cmd(dev, SET_RECEIVE_MODE) ; - return ; - } - - dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; - - netdev_for_each_mc_addr(ha, dev) { - dev_mc_address[0] |= ha->addr[2]; - dev_mc_address[1] |= ha->addr[3]; - dev_mc_address[2] |= ha->addr[4]; - dev_mc_address[3] |= ha->addr[5]; - } - - if (memcmp(xl_priv->xl_functional_addr,dev_mc_address,4) != 0) { /* Options have changed, run the command */ - memcpy(xl_priv->xl_functional_addr, dev_mc_address,4) ; - xl_srb_cmd(dev, SET_FUNC_ADDRESS) ; - } - return ; -} - - -/* - * We issued an srb command and now we must read - * the response from the completed command. - */ - -static void xl_srb_bh(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - u8 srb_cmd, ret_code ; - int i ; - - writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - srb_cmd = readb(xl_mmio + MMIO_MACDATA) ; - writel((MEM_BYTE_READ | 0xd0000 | xl_priv->srb) +2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - ret_code = readb(xl_mmio + MMIO_MACDATA) ; - - /* Ret_code is standard across all commands */ - - switch (ret_code) { - case 1: - printk(KERN_INFO "%s: Command: %d - Invalid Command code\n",dev->name,srb_cmd) ; - break ; - case 4: - printk(KERN_INFO "%s: Command: %d - Adapter is closed, must be open for this command\n",dev->name,srb_cmd); - break ; - - case 6: - printk(KERN_INFO "%s: Command: %d - Options Invalid for command\n",dev->name,srb_cmd); - break ; - - case 0: /* Successful command execution */ - switch (srb_cmd) { - case READ_LOG: /* Returns 14 bytes of data from the NIC */ - if(xl_priv->xl_message_level) - printk(KERN_INFO "%s: READ.LOG 14 bytes of data ",dev->name) ; - /* - * We still have to read the log even if message_level = 0 and we don't want - * to see it - */ - for (i=0;i<14;i++) { - writel(MEM_BYTE_READ | 0xd0000 | xl_priv->srb | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if(xl_priv->xl_message_level) - printk("%02x:",readb(xl_mmio + MMIO_MACDATA)) ; - } - printk("\n") ; - break ; - case SET_FUNC_ADDRESS: - if(xl_priv->xl_message_level) - printk(KERN_INFO "%s: Functional Address Set\n",dev->name); - break ; - case CLOSE_NIC: - if(xl_priv->xl_message_level) - printk(KERN_INFO "%s: Received CLOSE_NIC interrupt in interrupt handler\n",dev->name); - break ; - case SET_MULTICAST_MODE: - if(xl_priv->xl_message_level) - printk(KERN_INFO "%s: Multicast options successfully changed\n",dev->name) ; - break ; - case SET_RECEIVE_MODE: - if(xl_priv->xl_message_level) { - if (xl_priv->xl_copy_all_options == 0x0004) - printk(KERN_INFO "%s: Entering promiscuous mode\n", dev->name); - else - printk(KERN_INFO "%s: Entering normal receive mode\n",dev->name); - } - break ; - - } /* switch */ - break ; - } /* switch */ - return ; -} - -static int xl_set_mac_address (struct net_device *dev, void *addr) -{ - struct sockaddr *saddr = addr ; - struct xl_private *xl_priv = netdev_priv(dev); - - if (netif_running(dev)) { - printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ; - return -EIO ; - } - - memcpy(xl_priv->xl_laa, saddr->sa_data,dev->addr_len) ; - - if (xl_priv->xl_message_level) { - printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, xl_priv->xl_laa[0], - xl_priv->xl_laa[1], xl_priv->xl_laa[2], - xl_priv->xl_laa[3], xl_priv->xl_laa[4], - xl_priv->xl_laa[5]); - } - - return 0 ; -} - -static void xl_arb_cmd(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - u8 arb_cmd ; - u16 lan_status, lan_status_diff ; - - writel( ( MEM_BYTE_READ | 0xD0000 | xl_priv->arb), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - arb_cmd = readb(xl_mmio + MMIO_MACDATA) ; - - if (arb_cmd == RING_STATUS_CHANGE) { /* Ring.Status.Change */ - writel( ( (MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - - printk(KERN_INFO "%s: Ring Status Change: New Status = %04x\n", dev->name, swab16(readw(xl_mmio + MMIO_MACDATA) )) ; - - lan_status = swab16(readw(xl_mmio + MMIO_MACDATA)); - - /* Acknowledge interrupt, this tells nic we are done with the arb */ - writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - - lan_status_diff = xl_priv->xl_lan_status ^ lan_status ; - - if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) { - if (lan_status_diff & LSC_LWF) - printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name); - if (lan_status_diff & LSC_ARW) - printk(KERN_WARNING "%s: Auto removal error\n",dev->name); - if (lan_status_diff & LSC_FPE) - printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name); - if (lan_status_diff & LSC_RR) - printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name); - - /* Adapter has been closed by the hardware */ - - netif_stop_queue(dev); - xl_freemem(dev) ; - free_irq(dev->irq,dev); - - printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name); - } /* If serious error */ - - if (xl_priv->xl_message_level) { - if (lan_status_diff & LSC_SIG_LOSS) - printk(KERN_WARNING "%s: No receive signal detected\n", dev->name); - if (lan_status_diff & LSC_HARD_ERR) - printk(KERN_INFO "%s: Beaconing\n",dev->name); - if (lan_status_diff & LSC_SOFT_ERR) - printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name); - if (lan_status_diff & LSC_TRAN_BCN) - printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name); - if (lan_status_diff & LSC_SS) - printk(KERN_INFO "%s: Single Station on the ring\n", dev->name); - if (lan_status_diff & LSC_RING_REC) - printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name); - if (lan_status_diff & LSC_FDX_MODE) - printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name); - } - - if (lan_status_diff & LSC_CO) { - if (xl_priv->xl_message_level) - printk(KERN_INFO "%s: Counter Overflow\n", dev->name); - /* Issue READ.LOG command */ - xl_srb_cmd(dev, READ_LOG) ; - } - - /* There is no command in the tech docs to issue the read_sr_counters */ - if (lan_status_diff & LSC_SR_CO) { - if (xl_priv->xl_message_level) - printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name); - } - - xl_priv->xl_lan_status = lan_status ; - - } /* Lan.change.status */ - else if ( arb_cmd == RECEIVE_DATA) { /* Received.Data */ -#if XL_DEBUG - printk(KERN_INFO "Received.Data\n"); -#endif - writel( ((MEM_WORD_READ | 0xD0000 | xl_priv->arb) + 6), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - xl_priv->mac_buffer = swab16(readw(xl_mmio + MMIO_MACDATA)) ; - - /* Now we are going to be really basic here and not do anything - * with the data at all. The tech docs do not give me enough - * information to calculate the buffers properly so we're - * just going to tell the nic that we've dealt with the frame - * anyway. - */ - - /* Acknowledge interrupt, this tells nic we are done with the arb */ - writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK, xl_mmio + MMIO_COMMAND) ; - - /* Is the ASB free ? */ - - xl_priv->asb_queued = 0 ; - writel( ((MEM_BYTE_READ | 0xD0000 | xl_priv->asb) + 2), xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if (readb(xl_mmio + MMIO_MACDATA) != 0xff) { - xl_priv->asb_queued = 1 ; - - xl_wait_misr_flags(dev) ; - - writel(MEM_BYTE_WRITE | MF_ASBFR, xl_mmio + MMIO_MAC_ACCESS_CMD); - writeb(0xff, xl_mmio + MMIO_MACDATA) ; - writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(MISR_ASBFR, xl_mmio + MMIO_MACDATA) ; - return ; - /* Drop out and wait for the bottom half to be run */ - } - - xl_asb_cmd(dev) ; - - } else { - printk(KERN_WARNING "%s: Received unknown arb (xl_priv) command: %02x\n",dev->name,arb_cmd); - } - - /* Acknowledge the arb interrupt */ - - writel(ACK_INTERRUPT | ARBCACK | LATCH_ACK , xl_mmio + MMIO_COMMAND) ; - - return ; -} - - -/* - * There is only one asb command, but we can get called from different - * places. - */ - -static void xl_asb_cmd(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - - if (xl_priv->asb_queued == 1) - writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ; - - writel(MEM_BYTE_WRITE | 0xd0000 | xl_priv->asb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x81, xl_mmio + MMIO_MACDATA) ; - - writel(MEM_WORD_WRITE | 0xd0000 | xl_priv->asb | 6, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(swab16(xl_priv->mac_buffer), xl_mmio + MMIO_MACDATA) ; - - xl_wait_misr_flags(dev) ; - - writel(MEM_BYTE_WRITE | MF_RASB, xl_mmio + MMIO_MAC_ACCESS_CMD); - writeb(0xff, xl_mmio + MMIO_MACDATA) ; - - writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(MISR_RASB, xl_mmio + MMIO_MACDATA) ; - - xl_priv->asb_queued = 2 ; - - return ; -} - -/* - * This will only get called if there was an error - * from the asb cmd. - */ -static void xl_asb_bh(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - u8 ret_code ; - - writel(MMIO_BYTE_READ | 0xd0000 | xl_priv->asb | 2, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - ret_code = readb(xl_mmio + MMIO_MACDATA) ; - switch (ret_code) { - case 0x01: - printk(KERN_INFO "%s: ASB Command, unrecognized command code\n",dev->name); - break ; - case 0x26: - printk(KERN_INFO "%s: ASB Command, unexpected receive buffer\n", dev->name); - break ; - case 0x40: - printk(KERN_INFO "%s: ASB Command, Invalid Station ID\n", dev->name); - break ; - } - xl_priv->asb_queued = 0 ; - writel(ACK_INTERRUPT | LATCH_ACK | ASBFACK, xl_mmio + MMIO_COMMAND) ; - return ; -} - -/* - * Issue srb commands to the nic - */ - -static void xl_srb_cmd(struct net_device *dev, int srb_cmd) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - - switch (srb_cmd) { - case READ_LOG: - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(READ_LOG, xl_mmio + MMIO_MACDATA) ; - break; - - case CLOSE_NIC: - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(CLOSE_NIC, xl_mmio + MMIO_MACDATA) ; - break ; - - case SET_RECEIVE_MODE: - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(SET_RECEIVE_MODE, xl_mmio + MMIO_MACDATA) ; - writel(MEM_WORD_WRITE | 0xD0000 | xl_priv->srb | 4, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writew(xl_priv->xl_copy_all_options, xl_mmio + MMIO_MACDATA) ; - break ; - - case SET_FUNC_ADDRESS: - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(SET_FUNC_ADDRESS, xl_mmio + MMIO_MACDATA) ; - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 6 , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_functional_addr[0], xl_mmio + MMIO_MACDATA) ; - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 7 , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_functional_addr[1], xl_mmio + MMIO_MACDATA) ; - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 8 , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_functional_addr[2], xl_mmio + MMIO_MACDATA) ; - writel(MEM_BYTE_WRITE | 0xD0000 | xl_priv->srb | 9 , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(xl_priv->xl_functional_addr[3], xl_mmio + MMIO_MACDATA) ; - break ; - } /* switch */ - - - xl_wait_misr_flags(dev) ; - - /* Write 0xff to the CSRB flag */ - writel(MEM_BYTE_WRITE | MF_CSRB , xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0xFF, xl_mmio + MMIO_MACDATA) ; - /* Set csrb bit in MISR register to process command */ - writel(MMIO_BYTE_WRITE | MISR_SET, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(MISR_CSRB, xl_mmio + MMIO_MACDATA) ; - xl_priv->srb_queued = 1 ; - - return ; -} - -/* - * This is nasty, to use the MISR command you have to wait for 6 memory locations - * to be zero. This is the way the driver does on other OS'es so we should be ok with - * the empty loop. - */ - -static void xl_wait_misr_flags(struct net_device *dev) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u8 __iomem * xl_mmio = xl_priv->xl_mmio ; - - int i ; - - writel(MMIO_BYTE_READ | MISR_RW, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - if (readb(xl_mmio + MMIO_MACDATA) != 0) { /* Misr not clear */ - for (i=0; i<6; i++) { - writel(MEM_BYTE_READ | 0xDFFE0 | i, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - while (readb(xl_mmio + MMIO_MACDATA) != 0) { - ; /* Empty Loop */ - } - } - } - - writel(MMIO_BYTE_WRITE | MISR_AND, xl_mmio + MMIO_MAC_ACCESS_CMD) ; - writeb(0x80, xl_mmio + MMIO_MACDATA) ; - - return ; -} - -/* - * Change mtu size, this should work the same as olympic - */ - -static int xl_change_mtu(struct net_device *dev, int mtu) -{ - struct xl_private *xl_priv = netdev_priv(dev); - u16 max_mtu ; - - if (xl_priv->xl_ring_speed == 4) - max_mtu = 4500 ; - else - max_mtu = 18000 ; - - if (mtu > max_mtu) - return -EINVAL ; - if (mtu < 100) - return -EINVAL ; - - dev->mtu = mtu ; - xl_priv->pkt_buf_sz = mtu + TR_HLEN ; - - return 0 ; -} - -static void __devexit xl_remove_one (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - struct xl_private *xl_priv=netdev_priv(dev); - - release_firmware(xl_priv->fw); - unregister_netdev(dev); - iounmap(xl_priv->xl_mmio) ; - pci_release_regions(pdev) ; - pci_set_drvdata(pdev,NULL) ; - free_netdev(dev); - return ; -} - -static struct pci_driver xl_3c359_driver = { - .name = "3c359", - .id_table = xl_pci_tbl, - .probe = xl_probe, - .remove = __devexit_p(xl_remove_one), -}; - -module_pci_driver(xl_3c359_driver); - -MODULE_LICENSE("GPL") ; diff --git a/drivers/net/tokenring/3c359.h b/drivers/net/tokenring/3c359.h deleted file mode 100644 index bcb1a6b4a4c7..000000000000 --- a/drivers/net/tokenring/3c359.h +++ /dev/null @@ -1,291 +0,0 @@ -/* - * 3c359.h (c) 2000 Mike Phillips (mikep@linuxtr.net) All Rights Reserved - * - * Linux driver for 3Com 3C359 Token Link PCI XL cards. - * - * This software may be used and distributed according to the terms - * of the GNU General Public License Version 2 or (at your option) - * any later verion, incorporated herein by reference. - */ - -/* Memory Access Commands */ -#define IO_BYTE_READ 0x28 << 24 -#define IO_BYTE_WRITE 0x18 << 24 -#define IO_WORD_READ 0x20 << 24 -#define IO_WORD_WRITE 0x10 << 24 -#define MMIO_BYTE_READ 0x88 << 24 -#define MMIO_BYTE_WRITE 0x48 << 24 -#define MMIO_WORD_READ 0x80 << 24 -#define MMIO_WORD_WRITE 0x40 << 24 -#define MEM_BYTE_READ 0x8C << 24 -#define MEM_BYTE_WRITE 0x4C << 24 -#define MEM_WORD_READ 0x84 << 24 -#define MEM_WORD_WRITE 0x44 << 24 - -#define PMBAR 0x1C80 -#define PMB_CPHOLD (1<<10) - -#define CPATTENTION 0x180D -#define CPA_PMBARVIS (1<<7) -#define CPA_MEMWREN (1<<6) - -#define SWITCHSETTINGS 0x1C88 -#define EECONTROL 0x1C8A -#define EEDATA 0x1C8C -#define EEREAD 0x0080 -#define EEWRITE 0x0040 -#define EEERASE 0x0060 -#define EE_ENABLE_WRITE 0x0030 -#define EEBUSY (1<<15) - -#define WRBR 0xCDE02 -#define WWOR 0xCDE04 -#define WWCR 0xCDE06 -#define MACSTATUS 0xCDE08 -#define MISR_RW 0xCDE0B -#define MISR_AND 0xCDE2B -#define MISR_SET 0xCDE4B -#define RXBUFAREA 0xCDE10 -#define RXEARLYTHRESH 0xCDE12 -#define TXSTARTTHRESH 0x58 -#define DNPRIREQTHRESH 0x2C - -#define MISR_CSRB (1<<5) -#define MISR_RASB (1<<4) -#define MISR_SRBFR (1<<3) -#define MISR_ASBFR (1<<2) -#define MISR_ARBF (1<<1) - -/* MISR Flags memory locations */ -#define MF_SSBF 0xDFFE0 -#define MF_ARBF 0xDFFE1 -#define MF_ASBFR 0xDFFE2 -#define MF_SRBFR 0xDFFE3 -#define MF_RASB 0xDFFE4 -#define MF_CSRB 0xDFFE5 - -#define MMIO_MACDATA 0x10 -#define MMIO_MAC_ACCESS_CMD 0x14 -#define MMIO_TIMER 0x1A -#define MMIO_DMA_CTRL 0x20 -#define MMIO_DNLISTPTR 0x24 -#define MMIO_HASHFILTER 0x28 -#define MMIO_CONFIG 0x29 -#define MMIO_DNPRIREQTHRESH 0x2C -#define MMIO_DNPOLL 0x2D -#define MMIO_UPPKTSTATUS 0x30 -#define MMIO_FREETIMER 0x34 -#define MMIO_COUNTDOWN 0x36 -#define MMIO_UPLISTPTR 0x38 -#define MMIO_UPPOLL 0x3C -#define MMIO_UPBURSTTHRESH 0x40 -#define MMIO_DNBURSTTHRESH 0x41 -#define MMIO_INTSTATUS_AUTO 0x56 -#define MMIO_TXSTARTTHRESH 0x58 -#define MMIO_INTERRUPTENABLE 0x5A -#define MMIO_INDICATIONENABLE 0x5C -#define MMIO_COMMAND 0x5E /* These two are meant to be the same */ -#define MMIO_INTSTATUS 0x5E /* Makes the code more readable this way */ -#define INTSTAT_CMD_IN_PROGRESS (1<<12) -#define INTSTAT_SRB (1<<14) -#define INTSTAT_INTLATCH (1<<0) - -/* Indication / Interrupt Mask - * Annoyingly the bits to be set in the indication and interrupt enable - * do not match with the actual bits received in the interrupt, although - * they are in the same order. - * The mapping for the indication / interrupt are: - * Bit Indication / Interrupt - * 0 HostError - * 1 txcomplete - * 2 updneeded - * 3 rxcomplete - * 4 intrequested - * 5 macerror - * 6 dncomplete - * 7 upcomplete - * 8 txunderrun - * 9 asbf - * 10 srbr - * 11 arbc - * - * The only ones we don't want to receive are txcomplete and rxcomplete - * we use dncomplete and upcomplete instead. - */ - -#define INT_MASK 0xFF5 - -/* Note the subtle difference here, IND and INT */ - -#define SETINDENABLE (8<<12) -#define SETINTENABLE (7<<12) -#define SRBBIT (1<<10) -#define ASBBIT (1<<9) -#define ARBBIT (1<<11) - -#define SRB 0xDFE90 -#define ASB 0xDFED0 -#define ARB 0xD0000 -#define SCRATCH 0xDFEF0 - -#define INT_REQUEST 0x6000 /* (6 << 12) */ -#define ACK_INTERRUPT 0x6800 /* (13 <<11) */ -#define GLOBAL_RESET 0x00 -#define DNDISABLE 0x5000 -#define DNENABLE 0x4800 -#define DNSTALL 0x3002 -#define DNRESET 0x5800 -#define DNUNSTALL 0x3003 -#define UPRESET 0x2800 -#define UPSTALL 0x3000 -#define UPUNSTALL 0x3001 -#define SETCONFIG 0x4000 -#define SETTXSTARTTHRESH 0x9800 - -/* Received Interrupts */ -#define ASBFINT (1<<13) -#define SRBRINT (1<<14) -#define ARBCINT (1<<15) -#define TXUNDERRUN (1<<11) - -#define UPCOMPINT (1<<10) -#define DNCOMPINT (1<<9) -#define HARDERRINT (1<<7) -#define RXCOMPLETE (1<<4) -#define TXCOMPINT (1<<2) -#define HOSTERRINT (1<<1) - -/* Receive descriptor bits */ -#define RXOVERRUN cpu_to_le32(1<<19) -#define RXFC cpu_to_le32(1<<21) -#define RXAR cpu_to_le32(1<<22) -#define RXUPDCOMPLETE cpu_to_le32(1<<23) -#define RXUPDFULL cpu_to_le32(1<<24) -#define RXUPLASTFRAG cpu_to_le32(1<<31) - -/* Transmit descriptor bits */ -#define TXDNCOMPLETE cpu_to_le32(1<<16) -#define TXTXINDICATE cpu_to_le32(1<<27) -#define TXDPDEMPTY cpu_to_le32(1<<29) -#define TXDNINDICATE cpu_to_le32(1<<31) -#define TXDNFRAGLAST cpu_to_le32(1<<31) - -/* Interrupts to Acknowledge */ -#define LATCH_ACK 1 -#define TXCOMPACK (1<<1) -#define INTREQACK (1<<2) -#define DNCOMPACK (1<<3) -#define UPCOMPACK (1<<4) -#define ASBFACK (1<<5) -#define SRBRACK (1<<6) -#define ARBCACK (1<<7) - -#define XL_IO_SPACE 128 -#define SRB_COMMAND_SIZE 50 - -/* Adapter Commands */ -#define REQUEST_INT 0x00 -#define MODIFY_OPEN_PARMS 0x01 -#define RESTORE_OPEN_PARMS 0x02 -#define OPEN_NIC 0x03 -#define CLOSE_NIC 0x04 -#define SET_SLEEP_MODE 0x05 -#define SET_GROUP_ADDRESS 0x06 -#define SET_FUNC_ADDRESS 0x07 -#define READ_LOG 0x08 -#define SET_MULTICAST_MODE 0x0C -#define CHANGE_WAKEUP_PATTERN 0x0D -#define GET_STATISTICS 0x13 -#define SET_RECEIVE_MODE 0x1F - -/* ARB Commands */ -#define RECEIVE_DATA 0x81 -#define RING_STATUS_CHANGE 0x84 - -/* ASB Commands */ -#define ASB_RECEIVE_DATE 0x81 - -/* Defines for LAN STATUS CHANGE reports */ -#define LSC_SIG_LOSS 0x8000 -#define LSC_HARD_ERR 0x4000 -#define LSC_SOFT_ERR 0x2000 -#define LSC_TRAN_BCN 0x1000 -#define LSC_LWF 0x0800 -#define LSC_ARW 0x0400 -#define LSC_FPE 0x0200 -#define LSC_RR 0x0100 -#define LSC_CO 0x0080 -#define LSC_SS 0x0040 -#define LSC_RING_REC 0x0020 -#define LSC_SR_CO 0x0010 -#define LSC_FDX_MODE 0x0004 - -#define XL_MAX_ADAPTERS 8 /* 0x08 __MODULE_STRING can't hand 0xnn */ - -/* 3c359 defaults for buffers */ - -#define XL_RX_RING_SIZE 16 /* must be a power of 2 */ -#define XL_TX_RING_SIZE 16 /* must be a power of 2 */ - -#define PKT_BUF_SZ 4096 /* Default packet size */ - -/* 3c359 data structures */ - -struct xl_tx_desc { - __le32 dnnextptr; - __le32 framestartheader; - __le32 buffer; - __le32 buffer_length; -}; - -struct xl_rx_desc { - __le32 upnextptr; - __le32 framestatus; - __le32 upfragaddr; - __le32 upfraglen; -}; - -struct xl_private { - - - /* These two structures must be aligned on 8 byte boundaries */ - - /* struct xl_rx_desc xl_rx_ring[XL_RX_RING_SIZE]; */ - /* struct xl_tx_desc xl_tx_ring[XL_TX_RING_SIZE]; */ - struct xl_rx_desc *xl_rx_ring ; - struct xl_tx_desc *xl_tx_ring ; - struct sk_buff *tx_ring_skb[XL_TX_RING_SIZE], *rx_ring_skb[XL_RX_RING_SIZE]; - int tx_ring_head, tx_ring_tail ; - int rx_ring_tail, rx_ring_no ; - int free_ring_entries ; - - u16 srb; - u16 arb; - u16 asb; - - u8 __iomem *xl_mmio; - const char *xl_card_name; - struct pci_dev *pdev ; - - spinlock_t xl_lock ; - - volatile int srb_queued; - struct wait_queue *srb_wait; - volatile int asb_queued; - - u16 mac_buffer ; - u16 xl_lan_status ; - u8 xl_ring_speed ; - u16 pkt_buf_sz ; - u8 xl_message_level; - u16 xl_copy_all_options ; - unsigned char xl_functional_addr[4] ; - u16 xl_addr_table_addr, xl_parms_addr ; - u8 xl_laa[6] ; - u32 rx_ring_dma_addr ; - u32 tx_ring_dma_addr ; - - /* firmware section */ - const struct firmware *fw; -}; - diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig deleted file mode 100644 index ef3bb1326e4f..000000000000 --- a/drivers/net/tokenring/Kconfig +++ /dev/null @@ -1,199 +0,0 @@ -# -# Token Ring driver configuration -# - -# So far, we only have PCI, ISA, and MCA token ring devices -menuconfig TR - bool "Token Ring driver support" - depends on NETDEVICES && !UML - depends on (PCI || ISA || MCA || CCW || PCMCIA) - help - Token Ring is IBM's way of communication on a local network; the - rest of the world uses Ethernet. To participate on a Token Ring - network, you need a special Token ring network card. If you are - connected to such a Token Ring network and want to use your Token - Ring card under Linux, say Y here and to the driver for your - particular card below and read the Token-Ring mini-HOWTO, available - from <http://www.tldp.org/docs.html#howto>. Most people can - say N here. - -if TR - -config WANT_LLC - def_bool y - select LLC - -config PCMCIA_IBMTR - tristate "IBM PCMCIA tokenring adapter support" - depends on IBMTR!=y && PCMCIA - ---help--- - Say Y here if you intend to attach this type of Token Ring PCMCIA - card to your computer. You then also need to say Y to "Token Ring - driver support". - - To compile this driver as a module, choose M here: the module will be - called ibmtr_cs. - -config IBMTR - tristate "IBM Tropic chipset based adapter support" - depends on ISA || MCA - ---help--- - This is support for all IBM Token Ring cards that don't use DMA. If - you have such a beast, say Y and read the Token-Ring mini-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - Warning: this driver will almost definitely fail if more than one - active Token Ring card is present. - - To compile this driver as a module, choose M here: the module will be - called ibmtr. - -config IBMOL - tristate "IBM Olympic chipset PCI adapter support" - depends on PCI - ---help--- - This is support for all non-Lanstreamer IBM PCI Token Ring Cards. - Specifically this is all IBM PCI, PCI Wake On Lan, PCI II, PCI II - Wake On Lan, and PCI 100/16/4 adapters. - - If you have such an adapter, say Y and read the Token-Ring - mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here: the module will be - called olympic. - - Also read <file:Documentation/networking/olympic.txt> or check the - Linux Token Ring Project site for the latest information at - <http://www.linuxtr.net/>. - -config IBMLS - tristate "IBM Lanstreamer chipset PCI adapter support" - depends on PCI && !64BIT - help - This is support for IBM Lanstreamer PCI Token Ring Cards. - - If you have such an adapter, say Y and read the Token-Ring - mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here: the module will be - called lanstreamer. - -config 3C359 - tristate "3Com 3C359 Token Link Velocity XL adapter support" - depends on PCI - ---help--- - This is support for the 3Com PCI Velocity XL cards, specifically - the 3Com 3C359, please note this is not for the 3C339 cards, you - should use the tms380 driver instead. - - If you have such an adapter, say Y and read the Token-Ring - mini-HOWTO, available from <http://www.tldp.org/docs.html#howto>. - - To compile this driver as a module, choose M here: the module will be - called 3c359. - - Also read the file <file:Documentation/networking/3c359.txt> or check the - Linux Token Ring Project site for the latest information at - <http://www.linuxtr.net> - -config TMS380TR - tristate "Generic TMS380 Token Ring ISA/PCI adapter support" - depends on PCI || ISA || MCA - select FW_LOADER - ---help--- - This driver provides generic support for token ring adapters - based on the Texas Instruments TMS380 series chipsets. This - includes the SysKonnect TR4/16(+) ISA (SK-4190), SysKonnect - TR4/16(+) PCI (SK-4590), SysKonnect TR4/16 PCI (SK-4591), - Compaq 4/16 PCI, Thomas-Conrad TC4048 4/16 PCI, and several - Madge adapters. If you say Y here, you will be asked to select - which cards to support below. If you're using modules, each - class of card will be supported by a separate module. - - If you have such an adapter and would like to use it, say Y and - read the Token-Ring mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - Also read the file <file:Documentation/networking/tms380tr.txt> or - check <http://www.auk.cx/tms380tr/>. - - To compile this driver as a module, choose M here: the module will be - called tms380tr. - -config TMSPCI - tristate "Generic TMS380 PCI support" - depends on TMS380TR && PCI - ---help--- - This tms380 module supports generic TMS380-based PCI cards. - - These cards are known to work: - - Compaq 4/16 TR PCI - - SysKonnect TR4/16 PCI (SK-4590/SK-4591) - - Thomas-Conrad TC4048 PCI 4/16 - - 3Com Token Link Velocity - - To compile this driver as a module, choose M here: the module will be - called tmspci. - -config SKISA - tristate "SysKonnect TR4/16 ISA support" - depends on TMS380TR && ISA && ISA_DMA_API - help - This tms380 module supports SysKonnect TR4/16 ISA cards. - - These cards are known to work: - - SysKonnect TR4/16 ISA (SK-4190) - - To compile this driver as a module, choose M here: the module will be - called skisa. - -config PROTEON - tristate "Proteon ISA support" - depends on TMS380TR && ISA && ISA_DMA_API - help - This tms380 module supports Proteon ISA cards. - - These cards are known to work: - - Proteon 1392 - - Proteon 1392 plus - - To compile this driver as a module, choose M here: the module will be - called proteon. - -config ABYSS - tristate "Madge Smart 16/4 PCI Mk2 support" - depends on TMS380TR && PCI - help - This tms380 module supports the Madge Smart 16/4 PCI Mk2 - cards (51-02). - - To compile this driver as a module, choose M here: the module will be - called abyss. - -config MADGEMC - tristate "Madge Smart 16/4 Ringnode MicroChannel" - depends on TMS380TR && MCA - help - This tms380 module supports the Madge Smart 16/4 MC16 and MC32 - MicroChannel adapters. - - To compile this driver as a module, choose M here: the module will be - called madgemc. - -config SMCTR - tristate "SMC ISA/MCA adapter support" - depends on (ISA || MCA_LEGACY) && (BROKEN || !64BIT) - ---help--- - This is support for the ISA and MCA SMC Token Ring cards, - specifically SMC TokenCard Elite (8115T) and SMC TokenCard Elite/A - (8115T/A) adapters. - - If you have such an adapter and would like to use it, say Y or M and - read the Token-Ring mini-HOWTO, available from - <http://www.tldp.org/docs.html#howto> and the file - <file:Documentation/networking/smctr.txt>. - - To compile this driver as a module, choose M here: the module will be - called smctr. - -endif # TR diff --git a/drivers/net/tokenring/Makefile b/drivers/net/tokenring/Makefile deleted file mode 100644 index f1be8d97b7a8..000000000000 --- a/drivers/net/tokenring/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# Makefile for drivers/net/tokenring -# - -obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o -obj-$(CONFIG_IBMTR) += ibmtr.o -obj-$(CONFIG_IBMOL) += olympic.o -obj-$(CONFIG_IBMLS) += lanstreamer.o -obj-$(CONFIG_TMS380TR) += tms380tr.o -obj-$(CONFIG_ABYSS) += abyss.o -obj-$(CONFIG_MADGEMC) += madgemc.o -obj-$(CONFIG_PROTEON) += proteon.o -obj-$(CONFIG_TMSPCI) += tmspci.o -obj-$(CONFIG_SKISA) += skisa.o -obj-$(CONFIG_SMCTR) += smctr.o -obj-$(CONFIG_3C359) += 3c359.o diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c deleted file mode 100644 index b715e6b444da..000000000000 --- a/drivers/net/tokenring/abyss.c +++ /dev/null @@ -1,468 +0,0 @@ -/* - * abyss.c: Network driver for the Madge Smart 16/4 PCI Mk2 token ring card. - * - * Written 1999-2000 by Adam Fritzler - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This driver module supports the following cards: - * - Madge Smart 16/4 PCI Mk2 - * - * Maintainer(s): - * AF Adam Fritzler - * - * Modification History: - * 30-Dec-99 AF Split off from the tms380tr driver. - * 22-Jan-00 AF Updated to use indirect read/writes - * 23-Nov-00 JG New PCI API, cleanups - * - * - * TODO: - * 1. See if we can use MMIO instead of inb/outb/inw/outw - * 2. Add support for Mk1 (has AT24 attached to the PCI - * config registers) - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#include "tms380tr.h" -#include "abyss.h" /* Madge-specific constants */ - -static char version[] __devinitdata = -"abyss.c: v1.02 23/11/2000 by Adam Fritzler\n"; - -#define ABYSS_IO_EXTENT 64 - -static DEFINE_PCI_DEVICE_TABLE(abyss_pci_tbl) = { - { PCI_VENDOR_ID_MADGE, PCI_DEVICE_ID_MADGE_MK2, - PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_TOKEN_RING << 8, 0x00ffffff, }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(pci, abyss_pci_tbl); - -MODULE_LICENSE("GPL"); - -static int abyss_open(struct net_device *dev); -static int abyss_close(struct net_device *dev); -static void abyss_enable(struct net_device *dev); -static int abyss_chipset_init(struct net_device *dev); -static void abyss_read_eeprom(struct net_device *dev); -static unsigned short abyss_setnselout_pins(struct net_device *dev); - -static void at24_writedatabyte(unsigned long regaddr, unsigned char byte); -static int at24_sendfullcmd(unsigned long regaddr, unsigned char cmd, unsigned char addr); -static int at24_sendcmd(unsigned long regaddr, unsigned char cmd); -static unsigned char at24_readdatabit(unsigned long regaddr); -static unsigned char at24_readdatabyte(unsigned long regaddr); -static int at24_waitforack(unsigned long regaddr); -static int at24_waitfornack(unsigned long regaddr); -static void at24_setlines(unsigned long regaddr, unsigned char clock, unsigned char data); -static void at24_start(unsigned long regaddr); -static unsigned char at24_readb(unsigned long regaddr, unsigned char addr); - -static unsigned short abyss_sifreadb(struct net_device *dev, unsigned short reg) -{ - return inb(dev->base_addr + reg); -} - -static unsigned short abyss_sifreadw(struct net_device *dev, unsigned short reg) -{ - return inw(dev->base_addr + reg); -} - -static void abyss_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg) -{ - outb(val, dev->base_addr + reg); -} - -static void abyss_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg) -{ - outw(val, dev->base_addr + reg); -} - -static struct net_device_ops abyss_netdev_ops; - -static int __devinit abyss_attach(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int versionprinted; - struct net_device *dev; - struct net_local *tp; - int ret, pci_irq_line; - unsigned long pci_ioaddr; - - if (versionprinted++ == 0) - printk("%s", version); - - if (pci_enable_device(pdev)) - return -EIO; - - /* Remove I/O space marker in bit 0. */ - pci_irq_line = pdev->irq; - pci_ioaddr = pci_resource_start (pdev, 0); - - /* At this point we have found a valid card. */ - - dev = alloc_trdev(sizeof(struct net_local)); - if (!dev) - return -ENOMEM; - - if (!request_region(pci_ioaddr, ABYSS_IO_EXTENT, dev->name)) { - ret = -EBUSY; - goto err_out_trdev; - } - - ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED, - dev->name, dev); - if (ret) - goto err_out_region; - - dev->base_addr = pci_ioaddr; - dev->irq = pci_irq_line; - - printk("%s: Madge Smart 16/4 PCI Mk2 (Abyss)\n", dev->name); - printk("%s: IO: %#4lx IRQ: %d\n", - dev->name, pci_ioaddr, dev->irq); - /* - * The TMS SIF registers lay 0x10 above the card base address. - */ - dev->base_addr += 0x10; - - ret = tmsdev_init(dev, &pdev->dev); - if (ret) { - printk("%s: unable to get memory for dev->priv.\n", - dev->name); - goto err_out_irq; - } - - abyss_read_eeprom(dev); - - printk("%s: Ring Station Address: %pM\n", dev->name, dev->dev_addr); - - tp = netdev_priv(dev); - tp->setnselout = abyss_setnselout_pins; - tp->sifreadb = abyss_sifreadb; - tp->sifreadw = abyss_sifreadw; - tp->sifwriteb = abyss_sifwriteb; - tp->sifwritew = abyss_sifwritew; - - memcpy(tp->ProductID, "Madge PCI 16/4 Mk2", PROD_ID_SIZE + 1); - - dev->netdev_ops = &abyss_netdev_ops; - - pci_set_drvdata(pdev, dev); - SET_NETDEV_DEV(dev, &pdev->dev); - - ret = register_netdev(dev); - if (ret) - goto err_out_tmsdev; - return 0; - -err_out_tmsdev: - pci_set_drvdata(pdev, NULL); - tmsdev_term(dev); -err_out_irq: - free_irq(pdev->irq, dev); -err_out_region: - release_region(pci_ioaddr, ABYSS_IO_EXTENT); -err_out_trdev: - free_netdev(dev); - return ret; -} - -static unsigned short abyss_setnselout_pins(struct net_device *dev) -{ - unsigned short val = 0; - struct net_local *tp = netdev_priv(dev); - - if(tp->DataRate == SPEED_4) - val |= 0x01; /* Set 4Mbps */ - else - val |= 0x00; /* Set 16Mbps */ - - return val; -} - -/* - * The following Madge boards should use this code: - * - Smart 16/4 PCI Mk2 (Abyss) - * - Smart 16/4 PCI Mk1 (PCI T) - * - Smart 16/4 Client Plus PnP (Big Apple) - * - Smart 16/4 Cardbus Mk2 - * - * These access an Atmel AT24 SEEPROM using their glue chip registers. - * - */ -static void at24_writedatabyte(unsigned long regaddr, unsigned char byte) -{ - int i; - - for (i = 0; i < 8; i++) { - at24_setlines(regaddr, 0, (byte >> (7-i))&0x01); - at24_setlines(regaddr, 1, (byte >> (7-i))&0x01); - at24_setlines(regaddr, 0, (byte >> (7-i))&0x01); - } -} - -static int at24_sendfullcmd(unsigned long regaddr, unsigned char cmd, unsigned char addr) -{ - if (at24_sendcmd(regaddr, cmd)) { - at24_writedatabyte(regaddr, addr); - return at24_waitforack(regaddr); - } - return 0; -} - -static int at24_sendcmd(unsigned long regaddr, unsigned char cmd) -{ - int i; - - for (i = 0; i < 10; i++) { - at24_start(regaddr); - at24_writedatabyte(regaddr, cmd); - if (at24_waitforack(regaddr)) - return 1; - } - return 0; -} - -static unsigned char at24_readdatabit(unsigned long regaddr) -{ - unsigned char val; - - at24_setlines(regaddr, 0, 1); - at24_setlines(regaddr, 1, 1); - val = (inb(regaddr) & AT24_DATA)?1:0; - at24_setlines(regaddr, 1, 1); - at24_setlines(regaddr, 0, 1); - return val; -} - -static unsigned char at24_readdatabyte(unsigned long regaddr) -{ - unsigned char data = 0; - int i; - - for (i = 0; i < 8; i++) { - data <<= 1; - data |= at24_readdatabit(regaddr); - } - - return data; -} - -static int at24_waitforack(unsigned long regaddr) -{ - int i; - - for (i = 0; i < 10; i++) { - if ((at24_readdatabit(regaddr) & 0x01) == 0x00) - return 1; - } - return 0; -} - -static int at24_waitfornack(unsigned long regaddr) -{ - int i; - for (i = 0; i < 10; i++) { - if ((at24_readdatabit(regaddr) & 0x01) == 0x01) - return 1; - } - return 0; -} - -static void at24_setlines(unsigned long regaddr, unsigned char clock, unsigned char data) -{ - unsigned char val = AT24_ENABLE; - if (clock) - val |= AT24_CLOCK; - if (data) - val |= AT24_DATA; - - outb(val, regaddr); - tms380tr_wait(20); /* Very necessary. */ -} - -static void at24_start(unsigned long regaddr) -{ - at24_setlines(regaddr, 0, 1); - at24_setlines(regaddr, 1, 1); - at24_setlines(regaddr, 1, 0); - at24_setlines(regaddr, 0, 1); -} - -static unsigned char at24_readb(unsigned long regaddr, unsigned char addr) -{ - unsigned char data = 0xff; - - if (at24_sendfullcmd(regaddr, AT24_WRITE, addr)) { - if (at24_sendcmd(regaddr, AT24_READ)) { - data = at24_readdatabyte(regaddr); - if (!at24_waitfornack(regaddr)) - data = 0xff; - } - } - return data; -} - - -/* - * Enable basic functions of the Madge chipset needed - * for initialization. - */ -static void abyss_enable(struct net_device *dev) -{ - unsigned char reset_reg; - unsigned long ioaddr; - - ioaddr = dev->base_addr; - reset_reg = inb(ioaddr + PCIBM2_RESET_REG); - reset_reg |= PCIBM2_RESET_REG_CHIP_NRES; - outb(reset_reg, ioaddr + PCIBM2_RESET_REG); - tms380tr_wait(100); -} - -/* - * Enable the functions of the Madge chipset needed for - * full working order. - */ -static int abyss_chipset_init(struct net_device *dev) -{ - unsigned char reset_reg; - unsigned long ioaddr; - - ioaddr = dev->base_addr; - - reset_reg = inb(ioaddr + PCIBM2_RESET_REG); - - reset_reg |= PCIBM2_RESET_REG_CHIP_NRES; - outb(reset_reg, ioaddr + PCIBM2_RESET_REG); - - reset_reg &= ~(PCIBM2_RESET_REG_CHIP_NRES | - PCIBM2_RESET_REG_FIFO_NRES | - PCIBM2_RESET_REG_SIF_NRES); - outb(reset_reg, ioaddr + PCIBM2_RESET_REG); - - tms380tr_wait(100); - - reset_reg |= PCIBM2_RESET_REG_CHIP_NRES; - outb(reset_reg, ioaddr + PCIBM2_RESET_REG); - - reset_reg |= PCIBM2_RESET_REG_SIF_NRES; - outb(reset_reg, ioaddr + PCIBM2_RESET_REG); - - reset_reg |= PCIBM2_RESET_REG_FIFO_NRES; - outb(reset_reg, ioaddr + PCIBM2_RESET_REG); - - outb(PCIBM2_INT_CONTROL_REG_SINTEN | - PCIBM2_INT_CONTROL_REG_PCI_ERR_ENABLE, - ioaddr + PCIBM2_INT_CONTROL_REG); - - outb(30, ioaddr + PCIBM2_FIFO_THRESHOLD); - - return 0; -} - -static inline void abyss_chipset_close(struct net_device *dev) -{ - unsigned long ioaddr; - - ioaddr = dev->base_addr; - outb(0, ioaddr + PCIBM2_RESET_REG); -} - -/* - * Read configuration data from the AT24 SEEPROM on Madge cards. - * - */ -static void abyss_read_eeprom(struct net_device *dev) -{ - struct net_local *tp; - unsigned long ioaddr; - unsigned short val; - int i; - - tp = netdev_priv(dev); - ioaddr = dev->base_addr; - - /* Must enable glue chip first */ - abyss_enable(dev); - - val = at24_readb(ioaddr + PCIBM2_SEEPROM_REG, - PCIBM2_SEEPROM_RING_SPEED); - tp->DataRate = val?SPEED_4:SPEED_16; /* set open speed */ - printk("%s: SEEPROM: ring speed: %dMb/sec\n", dev->name, tp->DataRate); - - val = at24_readb(ioaddr + PCIBM2_SEEPROM_REG, - PCIBM2_SEEPROM_RAM_SIZE) * 128; - printk("%s: SEEPROM: adapter RAM: %dkb\n", dev->name, val); - - dev->addr_len = 6; - for (i = 0; i < 6; i++) - dev->dev_addr[i] = at24_readb(ioaddr + PCIBM2_SEEPROM_REG, - PCIBM2_SEEPROM_BIA+i); -} - -static int abyss_open(struct net_device *dev) -{ - abyss_chipset_init(dev); - tms380tr_open(dev); - return 0; -} - -static int abyss_close(struct net_device *dev) -{ - tms380tr_close(dev); - abyss_chipset_close(dev); - return 0; -} - -static void __devexit abyss_detach (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - - BUG_ON(!dev); - unregister_netdev(dev); - release_region(dev->base_addr-0x10, ABYSS_IO_EXTENT); - free_irq(dev->irq, dev); - tmsdev_term(dev); - free_netdev(dev); - pci_set_drvdata(pdev, NULL); -} - -static struct pci_driver abyss_driver = { - .name = "abyss", - .id_table = abyss_pci_tbl, - .probe = abyss_attach, - .remove = __devexit_p(abyss_detach), -}; - -static int __init abyss_init (void) -{ - abyss_netdev_ops = tms380tr_netdev_ops; - - abyss_netdev_ops.ndo_open = abyss_open; - abyss_netdev_ops.ndo_stop = abyss_close; - - return pci_register_driver(&abyss_driver); -} - -static void __exit abyss_rmmod (void) -{ - pci_unregister_driver (&abyss_driver); -} - -module_init(abyss_init); -module_exit(abyss_rmmod); - diff --git a/drivers/net/tokenring/abyss.h b/drivers/net/tokenring/abyss.h deleted file mode 100644 index b0a473b89133..000000000000 --- a/drivers/net/tokenring/abyss.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * abyss.h: Header for the abyss tms380tr module - * - * Authors: - * - Adam Fritzler - */ - -#ifndef __LINUX_MADGETR_H -#define __LINUX_MADGETR_H - -#ifdef __KERNEL__ - -/* - * For Madge Smart 16/4 PCI Mk2. Since we increment the base address - * to get everything correct for the TMS SIF, we do these as negatives - * as they fall below the SIF in addressing. - */ -#define PCIBM2_INT_STATUS_REG ((short)-15)/* 0x01 */ -#define PCIBM2_INT_CONTROL_REG ((short)-14)/* 0x02 */ -#define PCIBM2_RESET_REG ((short)-12)/* 0x04 */ -#define PCIBM2_SEEPROM_REG ((short)-9) /* 0x07 */ - -#define PCIBM2_INT_CONTROL_REG_SINTEN 0x02 -#define PCIBM2_INT_CONTROL_REG_PCI_ERR_ENABLE 0x80 -#define PCIBM2_INT_STATUS_REG_PCI_ERR 0x80 - -#define PCIBM2_RESET_REG_CHIP_NRES 0x01 -#define PCIBM2_RESET_REG_FIFO_NRES 0x02 -#define PCIBM2_RESET_REG_SIF_NRES 0x04 - -#define PCIBM2_FIFO_THRESHOLD 0x21 -#define PCIBM2_BURST_LENGTH 0x22 - -/* - * Bits in PCIBM2_SEEPROM_REG. - */ -#define AT24_ENABLE 0x04 -#define AT24_DATA 0x02 -#define AT24_CLOCK 0x01 - -/* - * AT24 Commands. - */ -#define AT24_WRITE 0xA0 -#define AT24_READ 0xA1 - -/* - * Addresses in AT24 SEEPROM. - */ -#define PCIBM2_SEEPROM_BIA 0x12 -#define PCIBM2_SEEPROM_RING_SPEED 0x18 -#define PCIBM2_SEEPROM_RAM_SIZE 0x1A -#define PCIBM2_SEEPROM_HWF1 0x1C -#define PCIBM2_SEEPROM_HWF2 0x1E - - -#endif /* __KERNEL__ */ -#endif /* __LINUX_MADGETR_H */ diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c deleted file mode 100644 index b5c8c18f5046..000000000000 --- a/drivers/net/tokenring/ibmtr.c +++ /dev/null @@ -1,1964 +0,0 @@ -/* ibmtr.c: A shared-memory IBM Token Ring 16/4 driver for linux - * - * Written 1993 by Mark Swanson and Peter De Schrijver. - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This device driver should work with Any IBM Token Ring Card that does - * not use DMA. - * - * I used Donald Becker's (becker@scyld.com) device driver work - * as a base for most of my initial work. - * - * Changes by Peter De Schrijver - * (Peter.Deschrijver@linux.cc.kuleuven.ac.be) : - * - * + changed name to ibmtr.c in anticipation of other tr boards. - * + changed reset code and adapter open code. - * + added SAP open code. - * + a first attempt to write interrupt, transmit and receive routines. - * - * Changes by David W. Morris (dwm@shell.portal.com) : - * 941003 dwm: - Restructure tok_probe for multiple adapters, devices. - * + Add comments, misc reorg for clarity. - * + Flatten interrupt handler levels. - * - * Changes by Farzad Farid (farzy@zen.via.ecp.fr) - * and Pascal Andre (andre@chimay.via.ecp.fr) (March 9 1995) : - * + multi ring support clean up. - * + RFC1042 compliance enhanced. - * - * Changes by Pascal Andre (andre@chimay.via.ecp.fr) (September 7 1995) : - * + bug correction in tr_tx - * + removed redundant information display - * + some code reworking - * - * Changes by Michel Lespinasse (walken@via.ecp.fr), - * Yann Doussot (doussot@via.ecp.fr) and Pascal Andre (andre@via.ecp.fr) - * (February 18, 1996) : - * + modified shared memory and mmio access port the driver to - * alpha platform (structure access -> readb/writeb) - * - * Changes by Steve Kipisz (bungy@ibm.net or kipisz@vnet.ibm.com) - * (January 18 1996): - * + swapped WWOR and WWCR in ibmtr.h - * + moved some init code from tok_probe into trdev_init. The - * PCMCIA code can call trdev_init to complete initializing - * the driver. - * + added -DPCMCIA to support PCMCIA - * + detecting PCMCIA Card Removal in interrupt handler. If - * ISRP is FF, then a PCMCIA card has been removed - * 10/2000 Burt needed a new method to avoid crashing the OS - * - * Changes by Paul Norton (pnorton@cts.com) : - * + restructured the READ.LOG logic to prevent the transmit SRB - * from being rudely overwritten before the transmit cycle is - * complete. (August 15 1996) - * + completed multiple adapter support. (November 20 1996) - * + implemented csum_partial_copy in tr_rx and increased receive - * buffer size and count. Minor fixes. (March 15, 1997) - * - * Changes by Christopher Turcksin <wabbit@rtfc.demon.co.uk> - * + Now compiles ok as a module again. - * - * Changes by Paul Norton (pnorton@ieee.org) : - * + moved the header manipulation code in tr_tx and tr_rx to - * net/802/tr.c. (July 12 1997) - * + add retry and timeout on open if cable disconnected. (May 5 1998) - * + lifted 2000 byte mtu limit. now depends on shared-RAM size. - * May 25 1998) - * + can't allocate 2k recv buff at 8k shared-RAM. (20 October 1998) - * - * Changes by Joel Sloan (jjs@c-me.com) : - * + disable verbose debug messages by default - to enable verbose - * debugging, edit the IBMTR_DEBUG_MESSAGES define below - * - * Changes by Mike Phillips <phillim@amtrak.com> : - * + Added extra #ifdef's to work with new PCMCIA Token Ring Code. - * The PCMCIA code now just sets up the card so it can be recognized - * by ibmtr_probe. Also checks allocated memory vs. on-board memory - * for correct figure to use. - * - * Changes by Tim Hockin (thockin@isunix.it.ilstu.edu) : - * + added spinlocks for SMP sanity (10 March 1999) - * - * Changes by Jochen Friedrich to enable RFC1469 Option 2 multicasting - * i.e. using functional address C0 00 00 04 00 00 to transmit and - * receive multicast packets. - * - * Changes by Mike Sullivan (based on original sram patch by Dave Grothe - * to support windowing into on adapter shared ram. - * i.e. Use LANAID to setup a PnP configuration with 16K RAM. Paging - * will shift this 16K window over the entire available shared RAM. - * - * Changes by Peter De Schrijver (p2@mind.be) : - * + fixed a problem with PCMCIA card removal - * - * Change by Mike Sullivan et al.: - * + added turbo card support. No need to use lanaid to configure - * the adapter into isa compatibility mode. - * - * Changes by Burt Silverman to allow the computer to behave nicely when - * a cable is pulled or not in place, or a PCMCIA card is removed hot. - */ - -/* change the define of IBMTR_DEBUG_MESSAGES to a nonzero value -in the event that chatty debug messages are desired - jjs 12/30/98 */ - -#define IBMTR_DEBUG_MESSAGES 0 - -#include <linux/module.h> -#include <linux/sched.h> - -#ifdef PCMCIA /* required for ibmtr_cs.c to build */ -#undef MODULE /* yes, really */ -#undef ENABLE_PAGING -#else -#define ENABLE_PAGING 1 -#endif - -/* changes the output format of driver initialization */ -#define TR_VERBOSE 0 - -/* some 95 OS send many non UI frame; this allow removing the warning */ -#define TR_FILTERNONUI 1 - -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/netdevice.h> -#include <linux/ip.h> -#include <linux/trdevice.h> -#include <linux/ibmtr.h> - -#include <net/checksum.h> - -#include <asm/io.h> - -#define DPRINTK(format, args...) printk("%s: " format, dev->name , ## args) -#define DPRINTD(format, args...) DummyCall("%s: " format, dev->name , ## args) - -/* version and credits */ -#ifndef PCMCIA -static char version[] __devinitdata = - "\nibmtr.c: v1.3.57 8/ 7/94 Peter De Schrijver and Mark Swanson\n" - " v2.1.125 10/20/98 Paul Norton <pnorton@ieee.org>\n" - " v2.2.0 12/30/98 Joel Sloan <jjs@c-me.com>\n" - " v2.2.1 02/08/00 Mike Sullivan <sullivam@us.ibm.com>\n" - " v2.2.2 07/27/00 Burt Silverman <burts@us.ibm.com>\n" - " v2.4.0 03/01/01 Mike Sullivan <sullivan@us.ibm.com>\n"; -#endif - -/* this allows displaying full adapter information */ - -static char *channel_def[] __devinitdata = { "ISA", "MCA", "ISA P&P" }; - -static char pcchannelid[] __devinitdata = { - 0x05, 0x00, 0x04, 0x09, - 0x04, 0x03, 0x04, 0x0f, - 0x03, 0x06, 0x03, 0x01, - 0x03, 0x01, 0x03, 0x00, - 0x03, 0x09, 0x03, 0x09, - 0x03, 0x00, 0x02, 0x00 -}; - -static char mcchannelid[] __devinitdata = { - 0x04, 0x0d, 0x04, 0x01, - 0x05, 0x02, 0x05, 0x03, - 0x03, 0x06, 0x03, 0x03, - 0x05, 0x08, 0x03, 0x04, - 0x03, 0x05, 0x03, 0x01, - 0x03, 0x08, 0x02, 0x00 -}; - -static char __devinit *adapter_def(char type) -{ - switch (type) { - case 0xF: return "PC Adapter | PC Adapter II | Adapter/A"; - case 0xE: return "16/4 Adapter | 16/4 Adapter/A (long)"; - case 0xD: return "16/4 Adapter/A (short) | 16/4 ISA-16 Adapter"; - case 0xC: return "Auto 16/4 Adapter"; - default: return "adapter (unknown type)"; - } -}; - -#define TRC_INIT 0x01 /* Trace initialization & PROBEs */ -#define TRC_INITV 0x02 /* verbose init trace points */ -static unsigned char ibmtr_debug_trace = 0; - -static int ibmtr_probe1(struct net_device *dev, int ioaddr); -static unsigned char get_sram_size(struct tok_info *adapt_info); -static int trdev_init(struct net_device *dev); -static int tok_open(struct net_device *dev); -static int tok_init_card(struct net_device *dev); -static void tok_open_adapter(unsigned long dev_addr); -static void open_sap(unsigned char type, struct net_device *dev); -static void tok_set_multicast_list(struct net_device *dev); -static netdev_tx_t tok_send_packet(struct sk_buff *skb, - struct net_device *dev); -static int tok_close(struct net_device *dev); -static irqreturn_t tok_interrupt(int irq, void *dev_id); -static void initial_tok_int(struct net_device *dev); -static void tr_tx(struct net_device *dev); -static void tr_rx(struct net_device *dev); -static void ibmtr_reset_timer(struct timer_list*tmr,struct net_device *dev); -static void tok_rerun(unsigned long dev_addr); -static void ibmtr_readlog(struct net_device *dev); -static int ibmtr_change_mtu(struct net_device *dev, int mtu); -static void find_turbo_adapters(int *iolist); - -static int ibmtr_portlist[IBMTR_MAX_ADAPTERS+1] __devinitdata = { - 0xa20, 0xa24, 0, 0, 0 -}; -static int __devinitdata turbo_io[IBMTR_MAX_ADAPTERS] = {0}; -static int __devinitdata turbo_irq[IBMTR_MAX_ADAPTERS] = {0}; -static int __devinitdata turbo_searched = 0; - -#ifndef PCMCIA -static __u32 ibmtr_mem_base __devinitdata = 0xd0000; -#endif - -static void __devinit PrtChanID(char *pcid, short stride) -{ - short i, j; - for (i = 0, j = 0; i < 24; i++, j += stride) - printk("%1x", ((int) pcid[j]) & 0x0f); - printk("\n"); -} - -static void __devinit HWPrtChanID(void __iomem *pcid, short stride) -{ - short i, j; - for (i = 0, j = 0; i < 24; i++, j += stride) - printk("%1x", ((int) readb(pcid + j)) & 0x0f); - printk("\n"); -} - -/* We have to ioremap every checked address, because isa_readb is - * going away. - */ - -static void __devinit find_turbo_adapters(int *iolist) -{ - int ram_addr; - int index=0; - void __iomem *chanid; - int found_turbo=0; - unsigned char *tchanid, ctemp; - int i, j; - unsigned long jif; - void __iomem *ram_mapped ; - - if (turbo_searched == 1) return; - turbo_searched=1; - for (ram_addr=0xC0000; ram_addr < 0xE0000; ram_addr+=0x2000) { - - __u32 intf_tbl=0; - - found_turbo=1; - ram_mapped = ioremap((u32)ram_addr,0x1fff) ; - if (ram_mapped==NULL) - continue ; - chanid=(CHANNEL_ID + ram_mapped); - tchanid=pcchannelid; - ctemp=readb(chanid) & 0x0f; - if (ctemp != *tchanid) continue; - for (i=2,j=1; i<=46; i=i+2,j++) { - if ((readb(chanid+i) & 0x0f) != tchanid[j]){ - found_turbo=0; - break; - } - } - if (!found_turbo) continue; - - writeb(0x90, ram_mapped+0x1E01); - for(i=2; i<0x0f; i++) { - writeb(0x00, ram_mapped+0x1E01+i); - } - writeb(0x00, ram_mapped+0x1E01); - for(jif=jiffies+TR_BUSY_INTERVAL; time_before_eq(jiffies,jif);); - intf_tbl=ntohs(readw(ram_mapped+ACA_OFFSET+ACA_RW+WRBR_EVEN)); - if (intf_tbl) { -#if IBMTR_DEBUG_MESSAGES - printk("ibmtr::find_turbo_adapters, Turbo found at " - "ram_addr %x\n",ram_addr); - printk("ibmtr::find_turbo_adapters, interface_table "); - for(i=0; i<6; i++) { - printk("%x:",readb(ram_addr+intf_tbl+i)); - } - printk("\n"); -#endif - turbo_io[index]=ntohs(readw(ram_mapped+intf_tbl+4)); - turbo_irq[index]=readb(ram_mapped+intf_tbl+3); - outb(0, turbo_io[index] + ADAPTRESET); - for(jif=jiffies+TR_RST_TIME;time_before_eq(jiffies,jif);); - outb(0, turbo_io[index] + ADAPTRESETREL); - index++; - continue; - } -#if IBMTR_DEBUG_MESSAGES - printk("ibmtr::find_turbo_adapters, ibmtr card found at" - " %x but not a Turbo model\n",ram_addr); -#endif - iounmap(ram_mapped) ; - } /* for */ - for(i=0; i<IBMTR_MAX_ADAPTERS; i++) { - if(!turbo_io[i]) break; - for (j=0; j<IBMTR_MAX_ADAPTERS; j++) { - if ( iolist[j] && iolist[j] != turbo_io[i]) continue; - iolist[j]=turbo_io[i]; - break; - } - } -} - -static void ibmtr_cleanup_card(struct net_device *dev) -{ - if (dev->base_addr) { - outb(0,dev->base_addr+ADAPTRESET); - - schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ - - outb(0,dev->base_addr+ADAPTRESETREL); - } - -#ifndef PCMCIA - free_irq(dev->irq, dev); - release_region(dev->base_addr, IBMTR_IO_EXTENT); - - { - struct tok_info *ti = netdev_priv(dev); - iounmap(ti->mmio); - iounmap(ti->sram_virt); - } -#endif -} - -/**************************************************************************** - * ibmtr_probe(): Routine specified in the network device structure - * to probe for an IBM Token Ring Adapter. Routine outline: - * I. Interrogate hardware to determine if an adapter exists - * and what the speeds and feeds are - * II. Setup data structures to control execution based upon - * adapter characteristics. - * - * We expect ibmtr_probe to be called once for each device entry - * which references it. - ****************************************************************************/ - -static int __devinit ibmtr_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - - if (base_addr && base_addr <= 0x1ff) /* Don't probe at all. */ - return -ENXIO; - if (base_addr > 0x1ff) { /* Check a single specified location. */ - if (!ibmtr_probe1(dev, base_addr)) return 0; - return -ENODEV; - } - find_turbo_adapters(ibmtr_portlist); - for (i = 0; ibmtr_portlist[i]; i++) { - int ioaddr = ibmtr_portlist[i]; - - if (!ibmtr_probe1(dev, ioaddr)) return 0; - } - return -ENODEV; -} - -int __devinit ibmtr_probe_card(struct net_device *dev) -{ - int err = ibmtr_probe(dev); - if (!err) { - err = register_netdev(dev); - if (err) - ibmtr_cleanup_card(dev); - } - return err; -} - -/*****************************************************************************/ - -static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) -{ - - unsigned char segment, intr=0, irq=0, i, j, cardpresent=NOTOK, temp=0; - void __iomem * t_mmio = NULL; - struct tok_info *ti = netdev_priv(dev); - void __iomem *cd_chanid; - unsigned char *tchanid, ctemp; -#ifndef PCMCIA - unsigned char t_irq=0; - unsigned long timeout; - static int version_printed; -#endif - - /* Query the adapter PIO base port which will return - * indication of where MMIO was placed. We also have a - * coded interrupt number. - */ - segment = inb(PIOaddr); - if (segment < 0x40 || segment > 0xe0) { - /* Out of range values so we'll assume non-existent IO device - * but this is not necessarily a problem, esp if a turbo - * adapter is being used. */ -#if IBMTR_DEBUG_MESSAGES - DPRINTK("ibmtr_probe1(): unhappy that inb(0x%X) == 0x%X, " - "Hardware Problem?\n",PIOaddr,segment); -#endif - return -ENODEV; - } - /* - * Compute the linear base address of the MMIO area - * as LINUX doesn't care about segments - */ - t_mmio = ioremap(((__u32) (segment & 0xfc) << 11) + 0x80000,2048); - if (!t_mmio) { - DPRINTK("Cannot remap mmiobase memory area") ; - return -ENODEV ; - } - intr = segment & 0x03; /* low bits is coded interrupt # */ - if (ibmtr_debug_trace & TRC_INIT) - DPRINTK("PIOaddr: %4hx seg/intr: %2x mmio base: %p intr: %d\n" - , PIOaddr, (int) segment, t_mmio, (int) intr); - - /* - * Now we will compare expected 'channelid' strings with - * what we is there to learn of ISA/MCA or not TR card - */ -#ifdef PCMCIA - iounmap(t_mmio); - t_mmio = ti->mmio; /*BMS to get virtual address */ - irq = ti->irq; /*BMS to display the irq! */ -#endif - cd_chanid = (CHANNEL_ID + t_mmio); /* for efficiency */ - tchanid = pcchannelid; - cardpresent = TR_ISA; /* try ISA */ - - /* Suboptimize knowing first byte different */ - ctemp = readb(cd_chanid) & 0x0f; - if (ctemp != *tchanid) { /* NOT ISA card, try MCA */ - tchanid = mcchannelid; - cardpresent = TR_MCA; - if (ctemp != *tchanid) /* Neither ISA nor MCA */ - cardpresent = NOTOK; - } - if (cardpresent != NOTOK) { - /* Know presumed type, try rest of ID */ - for (i = 2, j = 1; i <= 46; i = i + 2, j++) { - if( (readb(cd_chanid+i)&0x0f) == tchanid[j]) continue; - /* match failed, not TR card */ - cardpresent = NOTOK; - break; - } - } - /* - * If we have an ISA board check for the ISA P&P version, - * as it has different IRQ settings - */ - if (cardpresent == TR_ISA && (readb(AIPFID + t_mmio) == 0x0e)) - cardpresent = TR_ISAPNP; - if (cardpresent == NOTOK) { /* "channel_id" did not match, report */ - if (!(ibmtr_debug_trace & TRC_INIT)) { -#ifndef PCMCIA - iounmap(t_mmio); -#endif - return -ENODEV; - } - DPRINTK( "Channel ID string not found for PIOaddr: %4hx\n", - PIOaddr); - DPRINTK("Expected for ISA: "); - PrtChanID(pcchannelid, 1); - DPRINTK(" found: "); -/* BMS Note that this can be misleading, when hardware is flaky, because you - are reading it a second time here. So with my flaky hardware, I'll see my- - self in this block, with the HW ID matching the ISA ID exactly! */ - HWPrtChanID(cd_chanid, 2); - DPRINTK("Expected for MCA: "); - PrtChanID(mcchannelid, 1); - } - /* Now, setup some of the pl0 buffers for this driver.. */ - /* If called from PCMCIA, it is already set up, so no need to - waste the memory, just use the existing structure */ -#ifndef PCMCIA - ti->mmio = t_mmio; - for (i = 0; i < IBMTR_MAX_ADAPTERS; i++) { - if (turbo_io[i] != PIOaddr) - continue; -#if IBMTR_DEBUG_MESSAGES - printk("ibmtr::tr_probe1, setting PIOaddr %x to Turbo\n", - PIOaddr); -#endif - ti->turbo = 1; - t_irq = turbo_irq[i]; - } -#endif /* !PCMCIA */ - ti->readlog_pending = 0; - init_waitqueue_head(&ti->wait_for_reset); - - /* if PCMCIA, the card can be recognized as either TR_ISA or TR_ISAPNP - * depending which card is inserted. */ - -#ifndef PCMCIA - switch (cardpresent) { - case TR_ISA: - if (intr == 0) irq = 9; /* irq2 really is irq9 */ - if (intr == 1) irq = 3; - if (intr == 2) irq = 6; - if (intr == 3) irq = 7; - ti->adapter_int_enable = PIOaddr + ADAPTINTREL; - break; - case TR_MCA: - if (intr == 0) irq = 9; - if (intr == 1) irq = 3; - if (intr == 2) irq = 10; - if (intr == 3) irq = 11; - ti->global_int_enable = 0; - ti->adapter_int_enable = 0; - ti->sram_phys=(__u32)(inb(PIOaddr+ADAPTRESETREL) & 0xfe) << 12; - break; - case TR_ISAPNP: - if (!t_irq) { - if (intr == 0) irq = 9; - if (intr == 1) irq = 3; - if (intr == 2) irq = 10; - if (intr == 3) irq = 11; - } else - irq=t_irq; - timeout = jiffies + TR_SPIN_INTERVAL; - while (!readb(ti->mmio + ACA_OFFSET + ACA_RW + RRR_EVEN)){ - if (!time_after(jiffies, timeout)) continue; - DPRINTK( "Hardware timeout during initialization.\n"); - iounmap(t_mmio); - return -ENODEV; - } - ti->sram_phys = - ((__u32)readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_EVEN)<<12); - ti->adapter_int_enable = PIOaddr + ADAPTINTREL; - break; - } /*end switch (cardpresent) */ -#endif /*not PCMCIA */ - - if (ibmtr_debug_trace & TRC_INIT) { /* just report int */ - DPRINTK("irq=%d", irq); - printk(", sram_phys=0x%x", ti->sram_phys); - if(ibmtr_debug_trace&TRC_INITV){ /* full chat in verbose only */ - DPRINTK(", ti->mmio=%p", ti->mmio); - printk(", segment=%02X", segment); - } - printk(".\n"); - } - - /* Get hw address of token ring card */ - j = 0; - for (i = 0; i < 0x18; i = i + 2) { - /* technical reference states to do this */ - temp = readb(ti->mmio + AIP + i) & 0x0f; - ti->hw_address[j] = temp; - if (j & 1) - dev->dev_addr[(j / 2)] = - ti->hw_address[j]+ (ti->hw_address[j - 1] << 4); - ++j; - } - /* get Adapter type: 'F' = Adapter/A, 'E' = 16/4 Adapter II,... */ - ti->adapter_type = readb(ti->mmio + AIPADAPTYPE); - - /* get Data Rate: F=4Mb, E=16Mb, D=4Mb & 16Mb ?? */ - ti->data_rate = readb(ti->mmio + AIPDATARATE); - - /* Get Early Token Release support?: F=no, E=4Mb, D=16Mb, C=4&16Mb */ - ti->token_release = readb(ti->mmio + AIPEARLYTOKEN); - - /* How much shared RAM is on adapter ? */ - if (ti->turbo) { - ti->avail_shared_ram=127; - } else { - ti->avail_shared_ram = get_sram_size(ti);/*in 512 byte units */ - } - /* We need to set or do a bunch of work here based on previous results*/ - /* Support paging? What sizes?: F=no, E=16k, D=32k, C=16 & 32k */ - ti->shared_ram_paging = readb(ti->mmio + AIPSHRAMPAGE); - - /* Available DHB 4Mb size: F=2048, E=4096, D=4464 */ - switch (readb(ti->mmio + AIP4MBDHB)) { - case 0xe: ti->dhb_size4mb = 4096; break; - case 0xd: ti->dhb_size4mb = 4464; break; - default: ti->dhb_size4mb = 2048; break; - } - - /* Available DHB 16Mb size: F=2048, E=4096, D=8192, C=16384, B=17960 */ - switch (readb(ti->mmio + AIP16MBDHB)) { - case 0xe: ti->dhb_size16mb = 4096; break; - case 0xd: ti->dhb_size16mb = 8192; break; - case 0xc: ti->dhb_size16mb = 16384; break; - case 0xb: ti->dhb_size16mb = 17960; break; - default: ti->dhb_size16mb = 2048; break; - } - - /* We must figure out how much shared memory space this adapter - * will occupy so that if there are two adapters we can fit both - * in. Given a choice, we will limit this adapter to 32K. The - * maximum space will will use for two adapters is 64K so if the - * adapter we are working on demands 64K (it also doesn't support - * paging), then only one adapter can be supported. - */ - - /* - * determine how much of total RAM is mapped into PC space - */ - ti->mapped_ram_size= /*sixteen to onehundredtwentyeight 512byte blocks*/ - 1<< ((readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_ODD) >> 2 & 0x03) + 4); - ti->page_mask = 0; - if (ti->turbo) ti->page_mask=0xf0; - else if (ti->shared_ram_paging == 0xf); /* No paging in adapter */ - else { -#ifdef ENABLE_PAGING - unsigned char pg_size = 0; - /* BMS: page size: PCMCIA, use configuration register; - ISAPNP, use LANAIDC config tool from www.ibm.com */ - switch (ti->shared_ram_paging) { - case 0xf: - break; - case 0xe: - ti->page_mask = (ti->mapped_ram_size == 32) ? 0xc0 : 0; - pg_size = 32; /* 16KB page size */ - break; - case 0xd: - ti->page_mask = (ti->mapped_ram_size == 64) ? 0x80 : 0; - pg_size = 64; /* 32KB page size */ - break; - case 0xc: - switch (ti->mapped_ram_size) { - case 32: - ti->page_mask = 0xc0; - pg_size = 32; - break; - case 64: - ti->page_mask = 0x80; - pg_size = 64; - break; - } - break; - default: - DPRINTK("Unknown shared ram paging info %01X\n", - ti->shared_ram_paging); - iounmap(t_mmio); - return -ENODEV; - break; - } /*end switch shared_ram_paging */ - - if (ibmtr_debug_trace & TRC_INIT) - DPRINTK("Shared RAM paging code: %02X, " - "mapped RAM size: %dK, shared RAM size: %dK, " - "page mask: %02X\n:", - ti->shared_ram_paging, ti->mapped_ram_size / 2, - ti->avail_shared_ram / 2, ti->page_mask); -#endif /*ENABLE_PAGING */ - } - -#ifndef PCMCIA - /* finish figuring the shared RAM address */ - if (cardpresent == TR_ISA) { - static const __u32 ram_bndry_mask[] = { - 0xffffe000, 0xffffc000, 0xffff8000, 0xffff0000 - }; - __u32 new_base, rrr_32, chk_base, rbm; - - rrr_32=readb(ti->mmio+ACA_OFFSET+ACA_RW+RRR_ODD) >> 2 & 0x03; - rbm = ram_bndry_mask[rrr_32]; - new_base = (ibmtr_mem_base + (~rbm)) & rbm;/* up to boundary */ - chk_base = new_base + (ti->mapped_ram_size << 9); - if (chk_base > (ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE)) { - DPRINTK("Shared RAM for this adapter (%05x) exceeds " - "driver limit (%05x), adapter not started.\n", - chk_base, ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE); - iounmap(t_mmio); - return -ENODEV; - } else { /* seems cool, record what we have figured out */ - ti->sram_base = new_base >> 12; - ibmtr_mem_base = chk_base; - } - } - else ti->sram_base = ti->sram_phys >> 12; - - /* The PCMCIA has already got the interrupt line and the io port, - so no chance of anybody else getting it - MLP */ - if (request_irq(dev->irq = irq, tok_interrupt, 0, "ibmtr", dev) != 0) { - DPRINTK("Could not grab irq %d. Halting Token Ring driver.\n", - irq); - iounmap(t_mmio); - return -ENODEV; - } - /*?? Now, allocate some of the PIO PORTs for this driver.. */ - /* record PIOaddr range as busy */ - if (!request_region(PIOaddr, IBMTR_IO_EXTENT, "ibmtr")) { - DPRINTK("Could not grab PIO range. Halting driver.\n"); - free_irq(dev->irq, dev); - iounmap(t_mmio); - return -EBUSY; - } - - if (!version_printed++) { - printk(version); - } -#endif /* !PCMCIA */ - DPRINTK("%s %s found\n", - channel_def[cardpresent - 1], adapter_def(ti->adapter_type)); - DPRINTK("using irq %d, PIOaddr %hx, %dK shared RAM.\n", - irq, PIOaddr, ti->mapped_ram_size / 2); - DPRINTK("Hardware address : %pM\n", dev->dev_addr); - if (ti->page_mask) - DPRINTK("Shared RAM paging enabled. " - "Page size: %uK Shared Ram size %dK\n", - ((ti->page_mask^0xff)+1) >>2, ti->avail_shared_ram / 2); - else - DPRINTK("Shared RAM paging disabled. ti->page_mask %x\n", - ti->page_mask); - - /* Calculate the maximum DHB we can use */ - /* two cases where avail_shared_ram doesn't equal mapped_ram_size: - 1. avail_shared_ram is 127 but mapped_ram_size is 128 (typical) - 2. user has configured adapter for less than avail_shared_ram - but is not using paging (she should use paging, I believe) - */ - if (!ti->page_mask) { - ti->avail_shared_ram= - min(ti->mapped_ram_size,ti->avail_shared_ram); - } - - switch (ti->avail_shared_ram) { - case 16: /* 8KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)2048); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=2; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)2048); - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=2; - break; - case 32: /* 16KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=4; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)4096); - ti->rbuf_len16 = 1032; /*1024 usable */ - ti->rbuf_cnt16=4; - break; - case 64: /* 32KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=6; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)10240); - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=6; - break; - case 127: /* 63.5KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=6; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)16384); - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=16; - break; - case 128: /* 64KB shared RAM */ - ti->dhb_size4mb = min(ti->dhb_size4mb, (unsigned short)4464); - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=6; - ti->dhb_size16mb = min(ti->dhb_size16mb, (unsigned short)17960); - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=16; - break; - default: - ti->dhb_size4mb = 2048; - ti->rbuf_len4 = 1032; - ti->rbuf_cnt4=2; - ti->dhb_size16mb = 2048; - ti->rbuf_len16 = 1032; - ti->rbuf_cnt16=2; - break; - } - /* this formula is not smart enough for the paging case - ti->rbuf_cnt<x> = (ti->avail_shared_ram * BLOCKSZ - ADAPT_PRIVATE - - ARBLENGTH - SSBLENGTH - DLC_MAX_SAP * SAPLENGTH - - DLC_MAX_STA * STALENGTH - ti->dhb_size<x>mb * NUM_DHB - - SRBLENGTH - ASBLENGTH) / ti->rbuf_len<x>; - */ - ti->maxmtu16 = (ti->rbuf_len16 - 8) * ti->rbuf_cnt16 - TR_HLEN; - ti->maxmtu4 = (ti->rbuf_len4 - 8) * ti->rbuf_cnt4 - TR_HLEN; - /*BMS assuming 18 bytes of Routing Information (usually works) */ - DPRINTK("Maximum Receive Internet Protocol MTU 16Mbps: %d, 4Mbps: %d\n", - ti->maxmtu16, ti->maxmtu4); - - dev->base_addr = PIOaddr; /* set the value for device */ - dev->mem_start = ti->sram_base << 12; - dev->mem_end = dev->mem_start + (ti->mapped_ram_size << 9) - 1; - trdev_init(dev); - return 0; /* Return 0 to indicate we have found a Token Ring card. */ -} /*ibmtr_probe1() */ - -/*****************************************************************************/ - -/* query the adapter for the size of shared RAM */ -/* the function returns the RAM size in units of 512 bytes */ - -static unsigned char __devinit get_sram_size(struct tok_info *adapt_info) -{ - unsigned char avail_sram_code; - static unsigned char size_code[] = { 0, 16, 32, 64, 127, 128 }; - /* Adapter gives - 'F' -- use RRR bits 3,2 - 'E' -- 8kb 'D' -- 16kb - 'C' -- 32kb 'A' -- 64KB - 'B' - 64KB less 512 bytes at top - (WARNING ... must zero top bytes in INIT */ - - avail_sram_code = 0xf - readb(adapt_info->mmio + AIPAVAILSHRAM); - if (avail_sram_code) return size_code[avail_sram_code]; - else /* for code 'F', must compute size from RRR(3,2) bits */ - return 1 << - ((readb(adapt_info->mmio+ACA_OFFSET+ACA_RW+RRR_ODD)>>2&3)+4); -} - -/*****************************************************************************/ - -static const struct net_device_ops trdev_netdev_ops = { - .ndo_open = tok_open, - .ndo_stop = tok_close, - .ndo_start_xmit = tok_send_packet, - .ndo_set_rx_mode = tok_set_multicast_list, - .ndo_change_mtu = ibmtr_change_mtu, -}; - -static int __devinit trdev_init(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - - SET_PAGE(ti->srb_page); - ti->open_failure = NO ; - dev->netdev_ops = &trdev_netdev_ops; - - return 0; -} - -/*****************************************************************************/ - -static int tok_init_card(struct net_device *dev) -{ - struct tok_info *ti; - short PIOaddr; - unsigned long i; - - PIOaddr = dev->base_addr; - ti = netdev_priv(dev); - /* Special processing for first interrupt after reset */ - ti->do_tok_int = FIRST_INT; - /* Reset adapter */ - writeb(~INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); - outb(0, PIOaddr + ADAPTRESET); - - schedule_timeout_uninterruptible(TR_RST_TIME); /* wait 50ms */ - - outb(0, PIOaddr + ADAPTRESETREL); -#ifdef ENABLE_PAGING - if (ti->page_mask) - writeb(SRPR_ENABLE_PAGING,ti->mmio+ACA_OFFSET+ACA_RW+SRPR_EVEN); -#endif - writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); - i = sleep_on_timeout(&ti->wait_for_reset, 4 * HZ); - return i? 0 : -EAGAIN; -} - -/*****************************************************************************/ -static int tok_open(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - int i; - - /*the case we were left in a failure state during a previous open */ - if (ti->open_failure == YES) { - DPRINTK("Last time you were disconnected, how about now?\n"); - printk("You can't insert with an ICS connector half-cocked.\n"); - } - - ti->open_status = CLOSED; /* CLOSED or OPEN */ - ti->sap_status = CLOSED; /* CLOSED or OPEN */ - ti->open_failure = NO; /* NO or YES */ - ti->open_mode = MANUAL; /* MANUAL or AUTOMATIC */ - - ti->sram_phys &= ~1; /* to reverse what we do in tok_close */ - /* init the spinlock */ - spin_lock_init(&ti->lock); - init_timer(&ti->tr_timer); - - i = tok_init_card(dev); - if (i) return i; - - while (1){ - tok_open_adapter((unsigned long) dev); - i= interruptible_sleep_on_timeout(&ti->wait_for_reset, 25 * HZ); - /* sig catch: estimate opening adapter takes more than .5 sec*/ - if (i>(245*HZ)/10) break; /* fancier than if (i==25*HZ) */ - if (i==0) break; - if (ti->open_status == OPEN && ti->sap_status==OPEN) { - netif_start_queue(dev); - DPRINTK("Adapter is up and running\n"); - return 0; - } - i=schedule_timeout_interruptible(TR_RETRY_INTERVAL); - /* wait 30 seconds */ - if(i!=0) break; /*prob. a signal, like the i>24*HZ case above */ - } - outb(0, dev->base_addr + ADAPTRESET);/* kill pending interrupts*/ - DPRINTK("TERMINATED via signal\n"); /*BMS useful */ - return -EAGAIN; -} - -/*****************************************************************************/ - -#define COMMAND_OFST 0 -#define OPEN_OPTIONS_OFST 8 -#define NUM_RCV_BUF_OFST 24 -#define RCV_BUF_LEN_OFST 26 -#define DHB_LENGTH_OFST 28 -#define NUM_DHB_OFST 30 -#define DLC_MAX_SAP_OFST 32 -#define DLC_MAX_STA_OFST 33 - -static void tok_open_adapter(unsigned long dev_addr) -{ - struct net_device *dev = (struct net_device *) dev_addr; - struct tok_info *ti; - int i; - - ti = netdev_priv(dev); - SET_PAGE(ti->init_srb_page); - writeb(~SRB_RESP_INT, ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_ODD); - for (i = 0; i < sizeof(struct dir_open_adapter); i++) - writeb(0, ti->init_srb + i); - writeb(DIR_OPEN_ADAPTER, ti->init_srb + COMMAND_OFST); - writew(htons(OPEN_PASS_BCON_MAC), ti->init_srb + OPEN_OPTIONS_OFST); - if (ti->ring_speed == 16) { - writew(htons(ti->dhb_size16mb), ti->init_srb + DHB_LENGTH_OFST); - writew(htons(ti->rbuf_cnt16), ti->init_srb + NUM_RCV_BUF_OFST); - writew(htons(ti->rbuf_len16), ti->init_srb + RCV_BUF_LEN_OFST); - } else { - writew(htons(ti->dhb_size4mb), ti->init_srb + DHB_LENGTH_OFST); - writew(htons(ti->rbuf_cnt4), ti->init_srb + NUM_RCV_BUF_OFST); - writew(htons(ti->rbuf_len4), ti->init_srb + RCV_BUF_LEN_OFST); - } - writeb(NUM_DHB, /* always 2 */ ti->init_srb + NUM_DHB_OFST); - writeb(DLC_MAX_SAP, ti->init_srb + DLC_MAX_SAP_OFST); - writeb(DLC_MAX_STA, ti->init_srb + DLC_MAX_STA_OFST); - ti->srb = ti->init_srb; /* We use this one in the interrupt handler */ - ti->srb_page = ti->init_srb_page; - DPRINTK("Opening adapter: Xmit bfrs: %d X %d, Rcv bfrs: %d X %d\n", - readb(ti->init_srb + NUM_DHB_OFST), - ntohs(readw(ti->init_srb + DHB_LENGTH_OFST)), - ntohs(readw(ti->init_srb + NUM_RCV_BUF_OFST)), - ntohs(readw(ti->init_srb + RCV_BUF_LEN_OFST))); - writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); -} - -/*****************************************************************************/ - -static void open_sap(unsigned char type, struct net_device *dev) -{ - int i; - struct tok_info *ti = netdev_priv(dev); - - SET_PAGE(ti->srb_page); - for (i = 0; i < sizeof(struct dlc_open_sap); i++) - writeb(0, ti->srb + i); - -#define MAX_I_FIELD_OFST 14 -#define SAP_VALUE_OFST 16 -#define SAP_OPTIONS_OFST 17 -#define STATION_COUNT_OFST 18 - - writeb(DLC_OPEN_SAP, ti->srb + COMMAND_OFST); - writew(htons(MAX_I_FIELD), ti->srb + MAX_I_FIELD_OFST); - writeb(SAP_OPEN_IND_SAP | SAP_OPEN_PRIORITY, ti->srb+ SAP_OPTIONS_OFST); - writeb(SAP_OPEN_STATION_CNT, ti->srb + STATION_COUNT_OFST); - writeb(type, ti->srb + SAP_VALUE_OFST); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); -} - - -/*****************************************************************************/ - -static void tok_set_multicast_list(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - struct netdev_hw_addr *ha; - unsigned char address[4]; - - int i; - - /*BMS the next line is CRUCIAL or you may be sad when you */ - /*BMS ifconfig tr down or hot unplug a PCMCIA card ??hownowbrowncow*/ - if (/*BMSHELPdev->start == 0 ||*/ ti->open_status != OPEN) return; - address[0] = address[1] = address[2] = address[3] = 0; - netdev_for_each_mc_addr(ha, dev) { - address[0] |= ha->addr[2]; - address[1] |= ha->addr[3]; - address[2] |= ha->addr[4]; - address[3] |= ha->addr[5]; - } - SET_PAGE(ti->srb_page); - for (i = 0; i < sizeof(struct srb_set_funct_addr); i++) - writeb(0, ti->srb + i); - -#define FUNCT_ADDRESS_OFST 6 - - writeb(DIR_SET_FUNC_ADDR, ti->srb + COMMAND_OFST); - for (i = 0; i < 4; i++) - writeb(address[i], ti->srb + FUNCT_ADDRESS_OFST + i); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); -#if TR_VERBOSE - DPRINTK("Setting functional address: "); - for (i=0;i<4;i++) printk("%02X ", address[i]); - printk("\n"); -#endif -} - -/*****************************************************************************/ - -#define STATION_ID_OFST 4 - -static netdev_tx_t tok_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - struct tok_info *ti; - unsigned long flags; - ti = netdev_priv(dev); - - netif_stop_queue(dev); - - /* lock against other CPUs */ - spin_lock_irqsave(&(ti->lock), flags); - - /* Save skb; we'll need it when the adapter asks for the data */ - ti->current_skb = skb; - SET_PAGE(ti->srb_page); - writeb(XMIT_UI_FRAME, ti->srb + COMMAND_OFST); - writew(ti->exsap_station_id, ti->srb + STATION_ID_OFST); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - spin_unlock_irqrestore(&(ti->lock), flags); - return NETDEV_TX_OK; -} - -/*****************************************************************************/ - -static int tok_close(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - - /* Important for PCMCIA hot unplug, otherwise, we'll pull the card, */ - /* unloading the module from memory, and then if a timer pops, ouch */ - del_timer_sync(&ti->tr_timer); - outb(0, dev->base_addr + ADAPTRESET); - ti->sram_phys |= 1; - ti->open_status = CLOSED; - - netif_stop_queue(dev); - DPRINTK("Adapter is closed.\n"); - return 0; -} - -/*****************************************************************************/ - -#define RETCODE_OFST 2 -#define OPEN_ERROR_CODE_OFST 6 -#define ASB_ADDRESS_OFST 8 -#define SRB_ADDRESS_OFST 10 -#define ARB_ADDRESS_OFST 12 -#define SSB_ADDRESS_OFST 14 - -static char *printphase[]= {"Lobe media test","Physical insertion", - "Address verification","Roll call poll","Request Parameters"}; -static char *printerror[]={"Function failure","Signal loss","Reserved", - "Frequency error","Timeout","Ring failure","Ring beaconing", - "Duplicate node address", - "Parameter request-retry count exceeded","Remove received", - "IMPL force received","Duplicate modifier", - "No monitor detected","Monitor contention failed for RPL"}; - -static void __iomem *map_address(struct tok_info *ti, unsigned index, __u8 *page) -{ - if (ti->page_mask) { - *page = (index >> 8) & ti->page_mask; - index &= ~(ti->page_mask << 8); - } - return ti->sram_virt + index; -} - -static void dir_open_adapter (struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - unsigned char ret_code; - __u16 err; - - ti->srb = map_address(ti, - ntohs(readw(ti->init_srb + SRB_ADDRESS_OFST)), - &ti->srb_page); - ti->ssb = map_address(ti, - ntohs(readw(ti->init_srb + SSB_ADDRESS_OFST)), - &ti->ssb_page); - ti->arb = map_address(ti, - ntohs(readw(ti->init_srb + ARB_ADDRESS_OFST)), - &ti->arb_page); - ti->asb = map_address(ti, - ntohs(readw(ti->init_srb + ASB_ADDRESS_OFST)), - &ti->asb_page); - ti->current_skb = NULL; - ret_code = readb(ti->init_srb + RETCODE_OFST); - err = ntohs(readw(ti->init_srb + OPEN_ERROR_CODE_OFST)); - if (!ret_code) { - ti->open_status = OPEN; /* TR adapter is now available */ - if (ti->open_mode == AUTOMATIC) { - DPRINTK("Adapter reopened.\n"); - } - writeb(~SRB_RESP_INT, ti->mmio+ACA_OFFSET+ACA_RESET+ISRP_ODD); - open_sap(EXTENDED_SAP, dev); - return; - } - ti->open_failure = YES; - if (ret_code == 7){ - if (err == 0x24) { - if (!ti->auto_speedsave) { - DPRINTK("Open failed: Adapter speed must match " - "ring speed if Automatic Ring Speed Save is " - "disabled.\n"); - ti->open_action = FAIL; - }else - DPRINTK("Retrying open to adjust to " - "ring speed, "); - } else if (err == 0x2d) { - DPRINTK("Physical Insertion: No Monitor Detected, "); - printk("retrying after %ds delay...\n", - TR_RETRY_INTERVAL/HZ); - } else if (err == 0x11) { - DPRINTK("Lobe Media Function Failure (0x11), "); - printk(" retrying after %ds delay...\n", - TR_RETRY_INTERVAL/HZ); - } else { - char **prphase = printphase; - char **prerror = printerror; - int pnr = err / 16 - 1; - int enr = err % 16 - 1; - DPRINTK("TR Adapter misc open failure, error code = "); - if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) || - enr < 0 || - enr >= ARRAY_SIZE(printerror)) - printk("0x%x, invalid Phase/Error.", err); - else - printk("0x%x, Phase: %s, Error: %s\n", err, - prphase[pnr], prerror[enr]); - printk(" retrying after %ds delay...\n", - TR_RETRY_INTERVAL/HZ); - } - } else DPRINTK("open failed: ret_code = %02X..., ", ret_code); - if (ti->open_action != FAIL) { - if (ti->open_mode==AUTOMATIC){ - ti->open_action = REOPEN; - ibmtr_reset_timer(&(ti->tr_timer), dev); - return; - } - wake_up(&ti->wait_for_reset); - return; - } - DPRINTK("FAILURE, CAPUT\n"); -} - -/******************************************************************************/ - -static irqreturn_t tok_interrupt(int irq, void *dev_id) -{ - unsigned char status; - /* unsigned char status_even ; */ - struct tok_info *ti; - struct net_device *dev; -#ifdef ENABLE_PAGING - unsigned char save_srpr; -#endif - - dev = dev_id; -#if TR_VERBOSE - DPRINTK("Int from tok_driver, dev : %p irq%d\n", dev,irq); -#endif - ti = netdev_priv(dev); - if (ti->sram_phys & 1) - return IRQ_NONE; /* PCMCIA card extraction flag */ - spin_lock(&(ti->lock)); -#ifdef ENABLE_PAGING - save_srpr = readb(ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); -#endif - - /* Disable interrupts till processing is finished */ - writeb((~INT_ENABLE), ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); - - /* Reset interrupt for ISA boards */ - if (ti->adapter_int_enable) - outb(0, ti->adapter_int_enable); - else /* used for PCMCIA cards */ - outb(0, ti->global_int_enable); - if (ti->do_tok_int == FIRST_INT){ - initial_tok_int(dev); -#ifdef ENABLE_PAGING - writeb(save_srpr, ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); -#endif - spin_unlock(&(ti->lock)); - return IRQ_HANDLED; - } - /* Begin interrupt handler HERE inline to avoid the extra - levels of logic and call depth for the original solution. */ - status = readb(ti->mmio + ACA_OFFSET + ACA_RW + ISRP_ODD); - /*BMSstatus_even = readb (ti->mmio + ACA_OFFSET + ACA_RW + ISRP_EVEN) */ - /*BMSdebugprintk("tok_interrupt: ISRP_ODD = 0x%x ISRP_EVEN = 0x%x\n", */ - /*BMS status,status_even); */ - - if (status & ADAP_CHK_INT) { - int i; - void __iomem *check_reason; - __u8 check_reason_page = 0; - check_reason = map_address(ti, - ntohs(readw(ti->mmio+ ACA_OFFSET+ACA_RW + WWCR_EVEN)), - &check_reason_page); - SET_PAGE(check_reason_page); - - DPRINTK("Adapter check interrupt\n"); - DPRINTK("8 reason bytes follow: "); - for (i = 0; i < 8; i++, check_reason++) - printk("%02X ", (int) readb(check_reason)); - printk("\n"); - writeb(~ADAP_CHK_INT, ti->mmio+ ACA_OFFSET+ACA_RESET+ ISRP_ODD); - status = readb(ti->mmio + ACA_OFFSET + ACA_RW + ISRA_EVEN); - DPRINTK("ISRA_EVEN == 0x02%x\n",status); - ti->open_status = CLOSED; - ti->sap_status = CLOSED; - ti->open_mode = AUTOMATIC; - netif_carrier_off(dev); - netif_stop_queue(dev); - ti->open_action = RESTART; - outb(0, dev->base_addr + ADAPTRESET); - ibmtr_reset_timer(&(ti->tr_timer), dev);/*BMS try to reopen*/ - spin_unlock(&(ti->lock)); - return IRQ_HANDLED; - } - if (readb(ti->mmio + ACA_OFFSET + ACA_RW + ISRP_EVEN) - & (TCR_INT | ERR_INT | ACCESS_INT)) { - DPRINTK("adapter error: ISRP_EVEN : %02x\n", - (int)readb(ti->mmio+ ACA_OFFSET + ACA_RW + ISRP_EVEN)); - writeb(~(TCR_INT | ERR_INT | ACCESS_INT), - ti->mmio + ACA_OFFSET + ACA_RESET + ISRP_EVEN); - status= readb(ti->mmio+ ACA_OFFSET + ACA_RW + ISRA_EVEN);/*BMS*/ - DPRINTK("ISRA_EVEN == 0x02%x\n",status);/*BMS*/ - writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); -#ifdef ENABLE_PAGING - writeb(save_srpr, ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); -#endif - spin_unlock(&(ti->lock)); - return IRQ_HANDLED; - } - if (status & SRB_RESP_INT) { /* SRB response */ - SET_PAGE(ti->srb_page); -#if TR_VERBOSE - DPRINTK("SRB resp: cmd=%02X rsp=%02X\n", - readb(ti->srb), readb(ti->srb + RETCODE_OFST)); -#endif - switch (readb(ti->srb)) { /* SRB command check */ - case XMIT_DIR_FRAME:{ - unsigned char xmit_ret_code; - xmit_ret_code = readb(ti->srb + RETCODE_OFST); - if (xmit_ret_code == 0xff) break; - DPRINTK("error on xmit_dir_frame request: %02X\n", - xmit_ret_code); - if (ti->current_skb) { - dev_kfree_skb_irq(ti->current_skb); - ti->current_skb = NULL; - } - /*dev->tbusy = 0;*/ - netif_wake_queue(dev); - if (ti->readlog_pending) - ibmtr_readlog(dev); - break; - } - case XMIT_UI_FRAME:{ - unsigned char xmit_ret_code; - - xmit_ret_code = readb(ti->srb + RETCODE_OFST); - if (xmit_ret_code == 0xff) break; - DPRINTK("error on xmit_ui_frame request: %02X\n", - xmit_ret_code); - if (ti->current_skb) { - dev_kfree_skb_irq(ti->current_skb); - ti->current_skb = NULL; - } - netif_wake_queue(dev); - if (ti->readlog_pending) - ibmtr_readlog(dev); - break; - } - case DIR_OPEN_ADAPTER: - dir_open_adapter(dev); - break; - case DLC_OPEN_SAP: - if (readb(ti->srb + RETCODE_OFST)) { - DPRINTK("open_sap failed: ret_code = %02X, " - "retrying\n", - (int) readb(ti->srb + RETCODE_OFST)); - ti->open_action = REOPEN; - ibmtr_reset_timer(&(ti->tr_timer), dev); - break; - } - ti->exsap_station_id = readw(ti->srb + STATION_ID_OFST); - ti->sap_status = OPEN;/* TR adapter is now available */ - if (ti->open_mode==MANUAL){ - wake_up(&ti->wait_for_reset); - break; - } - netif_wake_queue(dev); - netif_carrier_on(dev); - break; - case DIR_INTERRUPT: - case DIR_MOD_OPEN_PARAMS: - case DIR_SET_GRP_ADDR: - case DIR_SET_FUNC_ADDR: - case DLC_CLOSE_SAP: - if (readb(ti->srb + RETCODE_OFST)) - DPRINTK("error on %02X: %02X\n", - (int) readb(ti->srb + COMMAND_OFST), - (int) readb(ti->srb + RETCODE_OFST)); - break; - case DIR_READ_LOG: - if (readb(ti->srb + RETCODE_OFST)){ - DPRINTK("error on dir_read_log: %02X\n", - (int) readb(ti->srb + RETCODE_OFST)); - netif_wake_queue(dev); - break; - } -#if IBMTR_DEBUG_MESSAGES - -#define LINE_ERRORS_OFST 0 -#define INTERNAL_ERRORS_OFST 1 -#define BURST_ERRORS_OFST 2 -#define AC_ERRORS_OFST 3 -#define ABORT_DELIMITERS_OFST 4 -#define LOST_FRAMES_OFST 6 -#define RECV_CONGEST_COUNT_OFST 7 -#define FRAME_COPIED_ERRORS_OFST 8 -#define FREQUENCY_ERRORS_OFST 9 -#define TOKEN_ERRORS_OFST 10 - - DPRINTK("Line errors %02X, Internal errors %02X, " - "Burst errors %02X\n" "A/C errors %02X, " - "Abort delimiters %02X, Lost frames %02X\n" - "Receive congestion count %02X, " - "Frame copied errors %02X\nFrequency errors %02X, " - "Token errors %02X\n", - (int) readb(ti->srb + LINE_ERRORS_OFST), - (int) readb(ti->srb + INTERNAL_ERRORS_OFST), - (int) readb(ti->srb + BURST_ERRORS_OFST), - (int) readb(ti->srb + AC_ERRORS_OFST), - (int) readb(ti->srb + ABORT_DELIMITERS_OFST), - (int) readb(ti->srb + LOST_FRAMES_OFST), - (int) readb(ti->srb + RECV_CONGEST_COUNT_OFST), - (int) readb(ti->srb + FRAME_COPIED_ERRORS_OFST), - (int) readb(ti->srb + FREQUENCY_ERRORS_OFST), - (int) readb(ti->srb + TOKEN_ERRORS_OFST)); -#endif - netif_wake_queue(dev); - break; - default: - DPRINTK("Unknown command %02X encountered\n", - (int) readb(ti->srb)); - } /* end switch SRB command check */ - writeb(~SRB_RESP_INT, ti->mmio+ ACA_OFFSET+ACA_RESET+ ISRP_ODD); - } /* if SRB response */ - if (status & ASB_FREE_INT) { /* ASB response */ - SET_PAGE(ti->asb_page); -#if TR_VERBOSE - DPRINTK("ASB resp: cmd=%02X\n", readb(ti->asb)); -#endif - - switch (readb(ti->asb)) { /* ASB command check */ - case REC_DATA: - case XMIT_UI_FRAME: - case XMIT_DIR_FRAME: - break; - default: - DPRINTK("unknown command in asb %02X\n", - (int) readb(ti->asb)); - } /* switch ASB command check */ - if (readb(ti->asb + 2) != 0xff) /* checks ret_code */ - DPRINTK("ASB error %02X in cmd %02X\n", - (int) readb(ti->asb + 2), (int) readb(ti->asb)); - writeb(~ASB_FREE_INT, ti->mmio+ ACA_OFFSET+ACA_RESET+ ISRP_ODD); - } /* if ASB response */ - -#define STATUS_OFST 6 -#define NETW_STATUS_OFST 6 - - if (status & ARB_CMD_INT) { /* ARB response */ - SET_PAGE(ti->arb_page); -#if TR_VERBOSE - DPRINTK("ARB resp: cmd=%02X\n", readb(ti->arb)); -#endif - - switch (readb(ti->arb)) { /* ARB command check */ - case DLC_STATUS: - DPRINTK("DLC_STATUS new status: %02X on station %02X\n", - ntohs(readw(ti->arb + STATUS_OFST)), - ntohs(readw(ti->arb+ STATION_ID_OFST))); - break; - case REC_DATA: - tr_rx(dev); - break; - case RING_STAT_CHANGE:{ - unsigned short ring_status; - ring_status= ntohs(readw(ti->arb + NETW_STATUS_OFST)); - if (ibmtr_debug_trace & TRC_INIT) - DPRINTK("Ring Status Change...(0x%x)\n", - ring_status); - if(ring_status& (REMOVE_RECV|AUTO_REMOVAL|LOBE_FAULT)){ - netif_stop_queue(dev); - netif_carrier_off(dev); - DPRINTK("Remove received, or Auto-removal error" - ", or Lobe fault\n"); - DPRINTK("We'll try to reopen the closed adapter" - " after a %d second delay.\n", - TR_RETRY_INTERVAL/HZ); - /*I was confused: I saw the TR reopening but */ - /*forgot:with an RJ45 in an RJ45/ICS adapter */ - /*but adapter not in the ring, the TR will */ - /* open, and then soon close and come here. */ - ti->open_mode = AUTOMATIC; - ti->open_status = CLOSED; /*12/2000 BMS*/ - ti->open_action = REOPEN; - ibmtr_reset_timer(&(ti->tr_timer), dev); - } else if (ring_status & LOG_OVERFLOW) { - if(netif_queue_stopped(dev)) - ti->readlog_pending = 1; - else - ibmtr_readlog(dev); - } - break; - } - case XMIT_DATA_REQ: - tr_tx(dev); - break; - default: - DPRINTK("Unknown command %02X in arb\n", - (int) readb(ti->arb)); - break; - } /* switch ARB command check */ - writeb(~ARB_CMD_INT, ti->mmio+ ACA_OFFSET+ACA_RESET + ISRP_ODD); - writeb(ARB_FREE, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - } /* if ARB response */ - if (status & SSB_RESP_INT) { /* SSB response */ - unsigned char retcode; - SET_PAGE(ti->ssb_page); -#if TR_VERBOSE - DPRINTK("SSB resp: cmd=%02X rsp=%02X\n", - readb(ti->ssb), readb(ti->ssb + 2)); -#endif - - switch (readb(ti->ssb)) { /* SSB command check */ - case XMIT_DIR_FRAME: - case XMIT_UI_FRAME: - retcode = readb(ti->ssb + 2); - if (retcode && (retcode != 0x22))/* checks ret_code */ - DPRINTK("xmit ret_code: %02X xmit error code: " - "%02X\n", - (int)retcode, (int)readb(ti->ssb + 6)); - else - dev->stats.tx_packets++; - break; - case XMIT_XID_CMD: - DPRINTK("xmit xid ret_code: %02X\n", - (int) readb(ti->ssb + 2)); - default: - DPRINTK("Unknown command %02X in ssb\n", - (int) readb(ti->ssb)); - } /* SSB command check */ - writeb(~SSB_RESP_INT, ti->mmio+ ACA_OFFSET+ACA_RESET+ ISRP_ODD); - writeb(SSB_FREE, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - } /* if SSB response */ -#ifdef ENABLE_PAGING - writeb(save_srpr, ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); -#endif - writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); - spin_unlock(&(ti->lock)); - return IRQ_HANDLED; -} /*tok_interrupt */ - -/*****************************************************************************/ - -#define INIT_STATUS_OFST 1 -#define INIT_STATUS_2_OFST 2 -#define ENCODED_ADDRESS_OFST 8 - -static void initial_tok_int(struct net_device *dev) -{ - - __u32 encoded_addr, hw_encoded_addr; - struct tok_info *ti; - unsigned char init_status; /*BMS 12/2000*/ - - ti = netdev_priv(dev); - - ti->do_tok_int = NOT_FIRST; - - /* we assign the shared-ram address for ISA devices */ - writeb(ti->sram_base, ti->mmio + ACA_OFFSET + ACA_RW + RRR_EVEN); -#ifndef PCMCIA - ti->sram_virt = ioremap(((__u32)ti->sram_base << 12), ti->avail_shared_ram); -#endif - ti->init_srb = map_address(ti, - ntohs(readw(ti->mmio + ACA_OFFSET + WRBR_EVEN)), - &ti->init_srb_page); - if (ti->page_mask && ti->avail_shared_ram == 127) { - void __iomem *last_512; - __u8 last_512_page=0; - int i; - last_512 = map_address(ti, 0xfe00, &last_512_page); - /* initialize high section of ram (if necessary) */ - SET_PAGE(last_512_page); - for (i = 0; i < 512; i++) - writeb(0, last_512 + i); - } - SET_PAGE(ti->init_srb_page); - -#if TR_VERBOSE - { - int i; - - DPRINTK("ti->init_srb_page=0x%x\n", ti->init_srb_page); - DPRINTK("init_srb(%p):", ti->init_srb ); - for (i = 0; i < 20; i++) - printk("%02X ", (int) readb(ti->init_srb + i)); - printk("\n"); - } -#endif - - hw_encoded_addr = readw(ti->init_srb + ENCODED_ADDRESS_OFST); - encoded_addr = ntohs(hw_encoded_addr); - init_status= /*BMS 12/2000 check for shallow mode possibility (Turbo)*/ - readb(ti->init_srb+offsetof(struct srb_init_response,init_status)); - /*printk("Initial interrupt: init_status= 0x%02x\n",init_status);*/ - ti->ring_speed = init_status & 0x01 ? 16 : 4; - DPRINTK("Initial interrupt : %d Mbps, shared RAM base %08x.\n", - ti->ring_speed, (unsigned int)dev->mem_start); - ti->auto_speedsave = (readb(ti->init_srb+INIT_STATUS_2_OFST) & 4) != 0; - - if (ti->open_mode == MANUAL) wake_up(&ti->wait_for_reset); - else tok_open_adapter((unsigned long)dev); - -} /*initial_tok_int() */ - -/*****************************************************************************/ - -#define CMD_CORRELATE_OFST 1 -#define DHB_ADDRESS_OFST 6 - -#define FRAME_LENGTH_OFST 6 -#define HEADER_LENGTH_OFST 8 -#define RSAP_VALUE_OFST 9 - -static void tr_tx(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - struct trh_hdr *trhdr = (struct trh_hdr *) ti->current_skb->data; - unsigned int hdr_len; - __u32 dhb=0,dhb_base; - void __iomem *dhbuf = NULL; - unsigned char xmit_command; - int i,dhb_len=0x4000,src_len,src_offset; - struct trllc *llc; - struct srb_xmit xsrb; - __u8 dhb_page = 0; - __u8 llc_ssap; - - SET_PAGE(ti->asb_page); - - if (readb(ti->asb+RETCODE_OFST) != 0xFF) DPRINTK("ASB not free !!!\n"); - - /* in providing the transmit interrupts, is telling us it is ready for - data and providing a shared memory address for us to stuff with data. - Here we compute the effective address where we will place data. - */ - SET_PAGE(ti->arb_page); - dhb=dhb_base=ntohs(readw(ti->arb + DHB_ADDRESS_OFST)); - if (ti->page_mask) { - dhb_page = (dhb_base >> 8) & ti->page_mask; - dhb=dhb_base & ~(ti->page_mask << 8); - } - dhbuf = ti->sram_virt + dhb; - - /* Figure out the size of the 802.5 header */ - if (!(trhdr->saddr[0] & 0x80)) /* RIF present? */ - hdr_len = sizeof(struct trh_hdr) - TR_MAXRIFLEN; - else - hdr_len = ((ntohs(trhdr->rcf) & TR_RCF_LEN_MASK) >> 8) - + sizeof(struct trh_hdr) - TR_MAXRIFLEN; - - llc = (struct trllc *) (ti->current_skb->data + hdr_len); - - llc_ssap = llc->ssap; - SET_PAGE(ti->srb_page); - memcpy_fromio(&xsrb, ti->srb, sizeof(xsrb)); - SET_PAGE(ti->asb_page); - xmit_command = xsrb.command; - - writeb(xmit_command, ti->asb + COMMAND_OFST); - writew(xsrb.station_id, ti->asb + STATION_ID_OFST); - writeb(llc_ssap, ti->asb + RSAP_VALUE_OFST); - writeb(xsrb.cmd_corr, ti->asb + CMD_CORRELATE_OFST); - writeb(0, ti->asb + RETCODE_OFST); - if ((xmit_command == XMIT_XID_CMD) || (xmit_command == XMIT_TEST_CMD)) { - writew(htons(0x11), ti->asb + FRAME_LENGTH_OFST); - writeb(0x0e, ti->asb + HEADER_LENGTH_OFST); - SET_PAGE(dhb_page); - writeb(AC, dhbuf); - writeb(LLC_FRAME, dhbuf + 1); - for (i = 0; i < TR_ALEN; i++) - writeb((int) 0x0FF, dhbuf + i + 2); - for (i = 0; i < TR_ALEN; i++) - writeb(0, dhbuf + i + TR_ALEN + 2); - writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - return; - } - /* - * the token ring packet is copied from sk_buff to the adapter - * buffer identified in the command data received with the interrupt. - */ - writeb(hdr_len, ti->asb + HEADER_LENGTH_OFST); - writew(htons(ti->current_skb->len), ti->asb + FRAME_LENGTH_OFST); - src_len=ti->current_skb->len; - src_offset=0; - dhb=dhb_base; - while(1) { - if (ti->page_mask) { - dhb_page=(dhb >> 8) & ti->page_mask; - dhb=dhb & ~(ti->page_mask << 8); - dhb_len=0x4000-dhb; /* remaining size of this page */ - } - dhbuf = ti->sram_virt + dhb; - SET_PAGE(dhb_page); - if (src_len > dhb_len) { - memcpy_toio(dhbuf,&ti->current_skb->data[src_offset], - dhb_len); - src_len -= dhb_len; - src_offset += dhb_len; - dhb_base+=dhb_len; - dhb=dhb_base; - continue; - } - memcpy_toio(dhbuf, &ti->current_skb->data[src_offset], src_len); - break; - } - writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - dev->stats.tx_bytes += ti->current_skb->len; - dev_kfree_skb_irq(ti->current_skb); - ti->current_skb = NULL; - netif_wake_queue(dev); - if (ti->readlog_pending) - ibmtr_readlog(dev); -} /*tr_tx */ - -/*****************************************************************************/ - - -#define RECEIVE_BUFFER_OFST 6 -#define LAN_HDR_LENGTH_OFST 8 -#define DLC_HDR_LENGTH_OFST 9 - -#define DSAP_OFST 0 -#define SSAP_OFST 1 -#define LLC_OFST 2 -#define PROTID_OFST 3 -#define ETHERTYPE_OFST 6 - -static void tr_rx(struct net_device *dev) -{ - struct tok_info *ti = netdev_priv(dev); - __u32 rbuffer; - void __iomem *rbuf, *rbufdata, *llc; - __u8 rbuffer_page = 0; - unsigned char *data; - unsigned int rbuffer_len, lan_hdr_len, hdr_len, ip_len, length; - unsigned char dlc_hdr_len; - struct sk_buff *skb; - unsigned int skb_size = 0; - int IPv4_p = 0; - unsigned int chksum = 0; - struct iphdr *iph; - struct arb_rec_req rarb; - - SET_PAGE(ti->arb_page); - memcpy_fromio(&rarb, ti->arb, sizeof(rarb)); - rbuffer = ntohs(rarb.rec_buf_addr) ; - rbuf = map_address(ti, rbuffer, &rbuffer_page); - - SET_PAGE(ti->asb_page); - - if (readb(ti->asb + RETCODE_OFST) !=0xFF) DPRINTK("ASB not free !!!\n"); - - writeb(REC_DATA, ti->asb + COMMAND_OFST); - writew(rarb.station_id, ti->asb + STATION_ID_OFST); - writew(rarb.rec_buf_addr, ti->asb + RECEIVE_BUFFER_OFST); - - lan_hdr_len = rarb.lan_hdr_len; - if (lan_hdr_len > sizeof(struct trh_hdr)) { - DPRINTK("Linux cannot handle greater than 18 bytes RIF\n"); - return; - } /*BMS I added this above just to be very safe */ - dlc_hdr_len = readb(ti->arb + DLC_HDR_LENGTH_OFST); - hdr_len = lan_hdr_len + sizeof(struct trllc) + sizeof(struct iphdr); - - SET_PAGE(rbuffer_page); - llc = rbuf + offsetof(struct rec_buf, data) + lan_hdr_len; - -#if TR_VERBOSE - DPRINTK("offsetof data: %02X lan_hdr_len: %02X\n", - (__u32) offsetof(struct rec_buf, data), (unsigned int) lan_hdr_len); - DPRINTK("llc: %08X rec_buf_addr: %04X dev->mem_start: %lX\n", - llc, ntohs(rarb.rec_buf_addr), dev->mem_start); - DPRINTK("dsap: %02X, ssap: %02X, llc: %02X, protid: %02X%02X%02X, " - "ethertype: %04X\n", - (int) readb(llc + DSAP_OFST), (int) readb(llc + SSAP_OFST), - (int) readb(llc + LLC_OFST), (int) readb(llc + PROTID_OFST), - (int) readb(llc+PROTID_OFST+1),(int)readb(llc+PROTID_OFST + 2), - (int) ntohs(readw(llc + ETHERTYPE_OFST))); -#endif - if (readb(llc + offsetof(struct trllc, llc)) != UI_CMD) { - SET_PAGE(ti->asb_page); - writeb(DATA_LOST, ti->asb + RETCODE_OFST); - dev->stats.rx_dropped++; - writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - return; - } - length = ntohs(rarb.frame_len); - if (readb(llc + DSAP_OFST) == EXTENDED_SAP && - readb(llc + SSAP_OFST) == EXTENDED_SAP && - length >= hdr_len) IPv4_p = 1; -#if TR_VERBOSE -#define SADDR_OFST 8 -#define DADDR_OFST 2 - - if (!IPv4_p) { - - void __iomem *trhhdr = rbuf + offsetof(struct rec_buf, data); - u8 saddr[6]; - u8 daddr[6]; - int i; - for (i = 0 ; i < 6 ; i++) - saddr[i] = readb(trhhdr + SADDR_OFST + i); - for (i = 0 ; i < 6 ; i++) - daddr[i] = readb(trhhdr + DADDR_OFST + i); - DPRINTK("Probably non-IP frame received.\n"); - DPRINTK("ssap: %02X dsap: %02X " - "saddr: %pM daddr: %pM\n", - readb(llc + SSAP_OFST), readb(llc + DSAP_OFST), - saddr, daddr); - } -#endif - - /*BMS handle the case she comes in with few hops but leaves with many */ - skb_size=length-lan_hdr_len+sizeof(struct trh_hdr)+sizeof(struct trllc); - - if (!(skb = dev_alloc_skb(skb_size))) { - DPRINTK("out of memory. frame dropped.\n"); - dev->stats.rx_dropped++; - SET_PAGE(ti->asb_page); - writeb(DATA_LOST, ti->asb + offsetof(struct asb_rec, ret_code)); - writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - return; - } - /*BMS again, if she comes in with few but leaves with many */ - skb_reserve(skb, sizeof(struct trh_hdr) - lan_hdr_len); - skb_put(skb, length); - data = skb->data; - rbuffer_len = ntohs(readw(rbuf + offsetof(struct rec_buf, buf_len))); - rbufdata = rbuf + offsetof(struct rec_buf, data); - - if (IPv4_p) { - /* Copy the headers without checksumming */ - memcpy_fromio(data, rbufdata, hdr_len); - - /* Watch for padded packets and bogons */ - iph= (struct iphdr *)(data+ lan_hdr_len + sizeof(struct trllc)); - ip_len = ntohs(iph->tot_len) - sizeof(struct iphdr); - length -= hdr_len; - if ((ip_len <= length) && (ip_len > 7)) - length = ip_len; - data += hdr_len; - rbuffer_len -= hdr_len; - rbufdata += hdr_len; - } - /* Copy the payload... */ -#define BUFFER_POINTER_OFST 2 -#define BUFFER_LENGTH_OFST 6 - for (;;) { - if (ibmtr_debug_trace&TRC_INITV && length < rbuffer_len) - DPRINTK("CURIOUS, length=%d < rbuffer_len=%d\n", - length,rbuffer_len); - if (IPv4_p) - chksum=csum_partial_copy_nocheck((void*)rbufdata, - data,length<rbuffer_len?length:rbuffer_len,chksum); - else - memcpy_fromio(data, rbufdata, rbuffer_len); - rbuffer = ntohs(readw(rbuf+BUFFER_POINTER_OFST)) ; - if (!rbuffer) - break; - rbuffer -= 2; - length -= rbuffer_len; - data += rbuffer_len; - rbuf = map_address(ti, rbuffer, &rbuffer_page); - SET_PAGE(rbuffer_page); - rbuffer_len = ntohs(readw(rbuf + BUFFER_LENGTH_OFST)); - rbufdata = rbuf + offsetof(struct rec_buf, data); - } - - SET_PAGE(ti->asb_page); - writeb(0, ti->asb + offsetof(struct asb_rec, ret_code)); - - writeb(RESP_IN_ASB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - - dev->stats.rx_bytes += skb->len; - dev->stats.rx_packets++; - - skb->protocol = tr_type_trans(skb, dev); - if (IPv4_p) { - skb->csum = chksum; - skb->ip_summed = CHECKSUM_COMPLETE; - } - netif_rx(skb); -} /*tr_rx */ - -/*****************************************************************************/ - -static void ibmtr_reset_timer(struct timer_list *tmr, struct net_device *dev) -{ - tmr->expires = jiffies + TR_RETRY_INTERVAL; - tmr->data = (unsigned long) dev; - tmr->function = tok_rerun; - init_timer(tmr); - add_timer(tmr); -} - -/*****************************************************************************/ - -static void tok_rerun(unsigned long dev_addr) -{ - struct net_device *dev = (struct net_device *)dev_addr; - struct tok_info *ti = netdev_priv(dev); - - if ( ti->open_action == RESTART){ - ti->do_tok_int = FIRST_INT; - outb(0, dev->base_addr + ADAPTRESETREL); -#ifdef ENABLE_PAGING - if (ti->page_mask) - writeb(SRPR_ENABLE_PAGING, - ti->mmio + ACA_OFFSET + ACA_RW + SRPR_EVEN); -#endif - - writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); - } else - tok_open_adapter(dev_addr); -} - -/*****************************************************************************/ - -static void ibmtr_readlog(struct net_device *dev) -{ - struct tok_info *ti; - - ti = netdev_priv(dev); - - ti->readlog_pending = 0; - SET_PAGE(ti->srb_page); - writeb(DIR_READ_LOG, ti->srb); - writeb(INT_ENABLE, ti->mmio + ACA_OFFSET + ACA_SET + ISRP_EVEN); - writeb(CMD_IN_SRB, ti->mmio + ACA_OFFSET + ACA_SET + ISRA_ODD); - - netif_stop_queue(dev); - -} - -/*****************************************************************************/ - -static int ibmtr_change_mtu(struct net_device *dev, int mtu) -{ - struct tok_info *ti = netdev_priv(dev); - - if (ti->ring_speed == 16 && mtu > ti->maxmtu16) - return -EINVAL; - if (ti->ring_speed == 4 && mtu > ti->maxmtu4) - return -EINVAL; - dev->mtu = mtu; - return 0; -} - -/*****************************************************************************/ -#ifdef MODULE - -/* 3COM 3C619C supports 8 interrupts, 32 I/O ports */ -static struct net_device *dev_ibmtr[IBMTR_MAX_ADAPTERS]; -static int io[IBMTR_MAX_ADAPTERS] = { 0xa20, 0xa24 }; -static int irq[IBMTR_MAX_ADAPTERS]; -static int mem[IBMTR_MAX_ADAPTERS]; - -MODULE_LICENSE("GPL"); - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); - -static int __init ibmtr_init(void) -{ - int i; - int count=0; - - find_turbo_adapters(io); - - for (i = 0; i < IBMTR_MAX_ADAPTERS && io[i]; i++) { - struct net_device *dev; - irq[i] = 0; - mem[i] = 0; - dev = alloc_trdev(sizeof(struct tok_info)); - if (dev == NULL) { - if (i == 0) - return -ENOMEM; - break; - } - dev->base_addr = io[i]; - dev->irq = irq[i]; - dev->mem_start = mem[i]; - - if (ibmtr_probe_card(dev)) { - free_netdev(dev); - continue; - } - dev_ibmtr[i] = dev; - count++; - } - if (count) return 0; - printk("ibmtr: register_netdev() returned non-zero.\n"); - return -EIO; -} -module_init(ibmtr_init); - -static void __exit ibmtr_cleanup(void) -{ - int i; - - for (i = 0; i < IBMTR_MAX_ADAPTERS; i++){ - if (!dev_ibmtr[i]) - continue; - unregister_netdev(dev_ibmtr[i]); - ibmtr_cleanup_card(dev_ibmtr[i]); - free_netdev(dev_ibmtr[i]); - } -} -module_exit(ibmtr_cleanup); -#endif diff --git a/drivers/net/tokenring/ibmtr_cs.c b/drivers/net/tokenring/ibmtr_cs.c deleted file mode 100644 index 356e28e4881b..000000000000 --- a/drivers/net/tokenring/ibmtr_cs.c +++ /dev/null @@ -1,370 +0,0 @@ -/*====================================================================== - - A PCMCIA token-ring driver for IBM-based cards - - This driver supports the IBM PCMCIA Token-Ring Card. - Written by Steve Kipisz, kipisz@vnet.ibm.com or - bungy@ibm.net - - Written 1995,1996. - - This code is based on pcnet_cs.c from David Hinds. - - V2.2.0 February 1999 - Mike Phillips phillim@amtrak.com - - Linux V2.2.x presented significant changes to the underlying - ibmtr.c code. Mainly the code became a lot more organized and - modular. - - This caused the old PCMCIA Token Ring driver to give up and go - home early. Instead of just patching the old code to make it - work, the PCMCIA code has been streamlined, updated and possibly - improved. - - This code now only contains code required for the Card Services. - All we do here is set the card up enough so that the real ibmtr.c - driver can find it and work with it properly. - - i.e. We set up the io port, irq, mmio memory and shared ram - memory. This enables ibmtr_probe in ibmtr.c to find the card and - configure it as though it was a normal ISA and/or PnP card. - - CHANGES - - v2.2.5 April 1999 Mike Phillips (phillim@amtrak.com) - Obscure bug fix, required changed to ibmtr.c not ibmtr_cs.c - - v2.2.7 May 1999 Mike Phillips (phillim@amtrak.com) - Updated to version 2.2.7 to match the first version of the kernel - that the modification to ibmtr.c were incorporated into. - - v2.2.17 July 2000 Burt Silverman (burts@us.ibm.com) - Address translation feature of PCMCIA controller is usable so - memory windows can be placed in High memory (meaning above - 0xFFFFF.) - -======================================================================*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/timer.h> -#include <linux/module.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/ibmtr.h> - -#include <pcmcia/cistpl.h> -#include <pcmcia/ds.h> - -#include <asm/uaccess.h> -#include <asm/io.h> - -#define PCMCIA -#include "ibmtr.c" - - -/*====================================================================*/ - -/* Parameters that can be set with 'insmod' */ - -/* MMIO base address */ -static u_long mmiobase = 0xce000; - -/* SRAM base address */ -static u_long srambase = 0xd0000; - -/* SRAM size 8,16,32,64 */ -static u_long sramsize = 64; - -/* Ringspeed 4,16 */ -static int ringspeed = 16; - -module_param(mmiobase, ulong, 0); -module_param(srambase, ulong, 0); -module_param(sramsize, ulong, 0); -module_param(ringspeed, int, 0); -MODULE_LICENSE("GPL"); - -/*====================================================================*/ - -static int ibmtr_config(struct pcmcia_device *link); -static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase); -static void ibmtr_release(struct pcmcia_device *link); -static void ibmtr_detach(struct pcmcia_device *p_dev); - -/*====================================================================*/ - -typedef struct ibmtr_dev_t { - struct pcmcia_device *p_dev; - struct net_device *dev; - struct tok_info *ti; -} ibmtr_dev_t; - -static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { - ibmtr_dev_t *info = dev_id; - struct net_device *dev = info->dev; - return tok_interrupt(irq, dev); -}; - -static int __devinit ibmtr_attach(struct pcmcia_device *link) -{ - ibmtr_dev_t *info; - struct net_device *dev; - - dev_dbg(&link->dev, "ibmtr_attach()\n"); - - /* Create new token-ring device */ - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (!info) return -ENOMEM; - dev = alloc_trdev(sizeof(struct tok_info)); - if (!dev) { - kfree(info); - return -ENOMEM; - } - - info->p_dev = link; - link->priv = info; - info->ti = netdev_priv(dev); - - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 4; - link->config_flags |= CONF_ENABLE_IRQ; - link->config_regs = PRESENT_OPTION; - - info->dev = dev; - - return ibmtr_config(link); -} /* ibmtr_attach */ - -static void ibmtr_detach(struct pcmcia_device *link) -{ - struct ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - struct tok_info *ti = netdev_priv(dev); - - dev_dbg(&link->dev, "ibmtr_detach\n"); - - /* - * When the card removal interrupt hits tok_interrupt(), - * bail out early, so we don't crash the machine - */ - ti->sram_phys |= 1; - - unregister_netdev(dev); - - del_timer_sync(&(ti->tr_timer)); - - ibmtr_release(link); - - free_netdev(dev); - kfree(info); -} /* ibmtr_detach */ - -static int __devinit ibmtr_config(struct pcmcia_device *link) -{ - ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - struct tok_info *ti = netdev_priv(dev); - int i, ret; - - dev_dbg(&link->dev, "ibmtr_config\n"); - - link->io_lines = 16; - link->config_index = 0x61; - - /* Determine if this is PRIMARY or ALTERNATE. */ - - /* Try PRIMARY card at 0xA20-0xA23 */ - link->resource[0]->start = 0xA20; - i = pcmcia_request_io(link); - if (i != 0) { - /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ - link->resource[0]->start = 0xA24; - ret = pcmcia_request_io(link); - if (ret) - goto failed; - } - dev->base_addr = link->resource[0]->start; - - ret = pcmcia_request_exclusive_irq(link, ibmtr_interrupt); - if (ret) - goto failed; - dev->irq = link->irq; - ti->irq = link->irq; - ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); - - /* Allocate the MMIO memory window */ - link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - link->resource[2]->flags |= WIN_USE_WAIT; - link->resource[2]->start = 0; - link->resource[2]->end = 0x2000; - ret = pcmcia_request_window(link, link->resource[2], 250); - if (ret) - goto failed; - - ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase); - if (ret) - goto failed; - ti->mmio = ioremap(link->resource[2]->start, - resource_size(link->resource[2])); - - /* Allocate the SRAM memory window */ - link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - link->resource[3]->flags |= WIN_USE_WAIT; - link->resource[3]->start = 0; - link->resource[3]->end = sramsize * 1024; - ret = pcmcia_request_window(link, link->resource[3], 250); - if (ret) - goto failed; - - ret = pcmcia_map_mem_page(link, link->resource[3], srambase); - if (ret) - goto failed; - - ti->sram_base = srambase >> 12; - ti->sram_virt = ioremap(link->resource[3]->start, - resource_size(link->resource[3])); - ti->sram_phys = link->resource[3]->start; - - ret = pcmcia_enable_device(link); - if (ret) - goto failed; - - /* Set up the Token-Ring Controller Configuration Register and - turn on the card. Check the "Local Area Network Credit Card - Adapters Technical Reference" SC30-3585 for this info. */ - ibmtr_hw_setup(dev, mmiobase); - - SET_NETDEV_DEV(dev, &link->dev); - - i = ibmtr_probe_card(dev); - if (i != 0) { - pr_notice("register_netdev() failed\n"); - goto failed; - } - - netdev_info(dev, "port %#3lx, irq %d, mmio %#5lx, sram %#5lx, hwaddr=%pM\n", - dev->base_addr, dev->irq, - (u_long)ti->mmio, (u_long)(ti->sram_base << 12), - dev->dev_addr); - return 0; - -failed: - ibmtr_release(link); - return -ENODEV; -} /* ibmtr_config */ - -static void ibmtr_release(struct pcmcia_device *link) -{ - ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - - dev_dbg(&link->dev, "ibmtr_release\n"); - - if (link->resource[2]->end) { - struct tok_info *ti = netdev_priv(dev); - iounmap(ti->mmio); - } - pcmcia_disable_device(link); -} - -static int ibmtr_suspend(struct pcmcia_device *link) -{ - ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - - if (link->open) - netif_device_detach(dev); - - return 0; -} - -static int __devinit ibmtr_resume(struct pcmcia_device *link) -{ - ibmtr_dev_t *info = link->priv; - struct net_device *dev = info->dev; - - if (link->open) { - ibmtr_probe(dev); /* really? */ - netif_device_attach(dev); - } - - return 0; -} - - -/*====================================================================*/ - -static void ibmtr_hw_setup(struct net_device *dev, u_int mmiobase) -{ - int i; - - /* Bizarre IBM behavior, there are 16 bits of information we - need to set, but the card only allows us to send 4 bits at a - time. For each byte sent to base_addr, bits 7-4 tell the - card which part of the 16 bits we are setting, bits 3-0 contain - the actual information */ - - /* First nibble provides 4 bits of mmio */ - i = (mmiobase >> 16) & 0x0F; - outb(i, dev->base_addr); - - /* Second nibble provides 3 bits of mmio */ - i = 0x10 | ((mmiobase >> 12) & 0x0E); - outb(i, dev->base_addr); - - /* Third nibble, hard-coded values */ - i = 0x26; - outb(i, dev->base_addr); - - /* Fourth nibble sets shared ram page size */ - - /* 8 = 00, 16 = 01, 32 = 10, 64 = 11 */ - i = (sramsize >> 4) & 0x07; - i = ((i == 4) ? 3 : i) << 2; - i |= 0x30; - - if (ringspeed == 16) - i |= 2; - if (dev->base_addr == 0xA24) - i |= 1; - outb(i, dev->base_addr); - - /* 0x40 will release the card for use */ - outb(0x40, dev->base_addr); -} - -static const struct pcmcia_device_id ibmtr_ids[] = { - PCMCIA_DEVICE_PROD_ID12("3Com", "TokenLink Velocity PC Card", 0x41240e5b, 0x82c3734e), - PCMCIA_DEVICE_PROD_ID12("IBM", "TOKEN RING", 0xb569a6e5, 0xbf8eed47), - PCMCIA_DEVICE_NULL, -}; -MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); - -static struct pcmcia_driver ibmtr_cs_driver = { - .owner = THIS_MODULE, - .name = "ibmtr_cs", - .probe = ibmtr_attach, - .remove = ibmtr_detach, - .id_table = ibmtr_ids, - .suspend = ibmtr_suspend, - .resume = ibmtr_resume, -}; - -static int __init init_ibmtr_cs(void) -{ - return pcmcia_register_driver(&ibmtr_cs_driver); -} - -static void __exit exit_ibmtr_cs(void) -{ - pcmcia_unregister_driver(&ibmtr_cs_driver); -} - -module_init(init_ibmtr_cs); -module_exit(exit_ibmtr_cs); diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c deleted file mode 100644 index 97e4c65c1e29..000000000000 --- a/drivers/net/tokenring/lanstreamer.c +++ /dev/null @@ -1,1909 +0,0 @@ -/* - * lanstreamer.c -- driver for the IBM Auto LANStreamer PCI Adapter - * - * Written By: Mike Sullivan, IBM Corporation - * - * Copyright (C) 1999 IBM Corporation - * - * Linux driver for IBM PCI tokenring cards based on the LanStreamer MPC - * chipset. - * - * This driver is based on the olympic driver for IBM PCI TokenRing cards (Pit/Pit-Phy/Olympic - * chipsets) written by: - * 1999 Peter De Schrijver All Rights Reserved - * 1999 Mike Phillips (phillim@amtrak.com) - * - * Base Driver Skeleton: - * Written 1993-94 by Donald Becker. - * - * Copyright 1993 United States Government as represented by the - * Director, National Security Agency. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * NO WARRANTY - * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR - * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT - * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is - * solely responsible for determining the appropriateness of using and - * distributing the Program and assumes all risks associated with its - * exercise of rights under this Agreement, including but not limited to - * the risks and costs of program errors, damage to or loss of data, - * programs or equipment, and unavailability or interruption of operations. - * - * DISCLAIMER OF LIABILITY - * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED - * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * 12/10/99 - Alpha Release 0.1.0 - * First release to the public - * 03/03/00 - Merged to kernel, indented -kr -i8 -bri0, fixed some missing - * malloc free checks, reviewed code. <alan@redhat.com> - * 03/13/00 - Added spinlocks for smp - * 03/08/01 - Added support for module_init() and module_exit() - * 08/15/01 - Added ioctl() functionality for debugging, changed netif_*_queue - * calls and other incorrectness - Kent Yoder <yoder1@us.ibm.com> - * 11/05/01 - Restructured the interrupt function, added delays, reduced the - * the number of TX descriptors to 1, which together can prevent - * the card from locking up the box - <yoder1@us.ibm.com> - * 09/27/02 - New PCI interface + bug fix. - <yoder1@us.ibm.com> - * 11/13/02 - Removed free_irq calls which could cause a hang, added - * netif_carrier_{on|off} - <yoder1@us.ibm.com> - * - * To Do: - * - * - * If Problems do Occur - * Most problems can be rectified by either closing and opening the interface - * (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult - * if compiled into the kernel). - */ - -/* Change STREAMER_DEBUG to 1 to get verbose, and I mean really verbose, messages */ - -#define STREAMER_DEBUG 0 -#define STREAMER_DEBUG_PACKETS 0 - -/* Change STREAMER_NETWORK_MONITOR to receive mac frames through the arb channel. - * Will also create a /proc/net/streamer_tr entry if proc_fs is compiled into the - * kernel. - * Intended to be used to create a ring-error reporting network module - * i.e. it will give you the source address of beaconers on the ring - */ - -#define STREAMER_NETWORK_MONITOR 0 - -/* #define CONFIG_PROC_FS */ - -/* - * Allow or disallow ioctl's for debugging - */ - -#define STREAMER_IOCTL 0 - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/timer.h> -#include <linux/in.h> -#include <linux/ioport.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/ptrace.h> -#include <linux/skbuff.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> -#include <linux/jiffies.h> -#include <linux/slab.h> - -#include <net/net_namespace.h> -#include <net/checksum.h> - -#include <asm/io.h> - -#include "lanstreamer.h" - -#if (BITS_PER_LONG == 64) -#error broken on 64-bit: stores pointer to rx_ring->buffer in 32-bit int -#endif - - -/* I've got to put some intelligence into the version number so that Peter and I know - * which version of the code somebody has got. - * Version Number = a.b.c.d where a.b.c is the level of code and d is the latest author. - * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike - * - * Official releases will only have an a.b.c version number format. - */ - -static char version[] = "LanStreamer.c v0.4.0 03/08/01 - Mike Sullivan\n" - " v0.5.3 11/13/02 - Kent Yoder"; - -static DEFINE_PCI_DEVICE_TABLE(streamer_pci_tbl) = { - { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_TR, PCI_ANY_ID, PCI_ANY_ID,}, - {} /* terminating entry */ -}; -MODULE_DEVICE_TABLE(pci,streamer_pci_tbl); - - -static char *open_maj_error[] = { - "No error", "Lobe Media Test", "Physical Insertion", - "Address Verification", "Neighbor Notification (Ring Poll)", - "Request Parameters", "FDX Registration Request", - "FDX Lobe Media Test", "FDX Duplicate Address Check", - "Unknown stage" -}; - -static char *open_min_error[] = { - "No error", "Function Failure", "Signal Lost", "Wire Fault", - "Ring Speed Mismatch", "Timeout", "Ring Failure", "Ring Beaconing", - "Duplicate Node Address", "Request Parameters", "Remove Received", - "Reserved", "Reserved", "No Monitor Detected for RPL", - "Monitor Contention failer for RPL", "FDX Protocol Error" -}; - -/* Module parameters */ - -/* Ring Speed 0,4,16 - * 0 = Autosense - * 4,16 = Selected speed only, no autosense - * This allows the card to be the first on the ring - * and become the active monitor. - * - * WARNING: Some hubs will allow you to insert - * at the wrong speed - */ - -static int ringspeed[STREAMER_MAX_ADAPTERS] = { 0, }; - -module_param_array(ringspeed, int, NULL, 0); - -/* Packet buffer size */ - -static int pkt_buf_sz[STREAMER_MAX_ADAPTERS] = { 0, }; - -module_param_array(pkt_buf_sz, int, NULL, 0); - -/* Message Level */ - -static int message_level[STREAMER_MAX_ADAPTERS] = { 1, }; - -module_param_array(message_level, int, NULL, 0); - -#if STREAMER_IOCTL -static int streamer_ioctl(struct net_device *, struct ifreq *, int); -#endif - -static int streamer_reset(struct net_device *dev); -static int streamer_open(struct net_device *dev); -static netdev_tx_t streamer_xmit(struct sk_buff *skb, - struct net_device *dev); -static int streamer_close(struct net_device *dev); -static void streamer_set_rx_mode(struct net_device *dev); -static irqreturn_t streamer_interrupt(int irq, void *dev_id); -static int streamer_set_mac_address(struct net_device *dev, void *addr); -static void streamer_arb_cmd(struct net_device *dev); -static int streamer_change_mtu(struct net_device *dev, int mtu); -static void streamer_srb_bh(struct net_device *dev); -static void streamer_asb_bh(struct net_device *dev); -#if STREAMER_NETWORK_MONITOR -#ifdef CONFIG_PROC_FS -static int streamer_proc_info(char *buffer, char **start, off_t offset, - int length, int *eof, void *data); -static int sprintf_info(char *buffer, struct net_device *dev); -struct streamer_private *dev_streamer=NULL; -#endif -#endif - -static const struct net_device_ops streamer_netdev_ops = { - .ndo_open = streamer_open, - .ndo_stop = streamer_close, - .ndo_start_xmit = streamer_xmit, - .ndo_change_mtu = streamer_change_mtu, -#if STREAMER_IOCTL - .ndo_do_ioctl = streamer_ioctl, -#endif - .ndo_set_rx_mode = streamer_set_rx_mode, - .ndo_set_mac_address = streamer_set_mac_address, -}; - -static int __devinit streamer_init_one(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev; - struct streamer_private *streamer_priv; - unsigned long pio_start, pio_end, pio_flags, pio_len; - unsigned long mmio_start, mmio_end, mmio_flags, mmio_len; - int rc = 0; - static int card_no=-1; - u16 pcr; - -#if STREAMER_DEBUG - printk("lanstreamer::streamer_init_one, entry pdev %p\n",pdev); -#endif - - card_no++; - dev = alloc_trdev(sizeof(*streamer_priv)); - if (dev==NULL) { - printk(KERN_ERR "lanstreamer: out of memory.\n"); - return -ENOMEM; - } - - streamer_priv = netdev_priv(dev); - -#if STREAMER_NETWORK_MONITOR -#ifdef CONFIG_PROC_FS - if (!dev_streamer) - create_proc_read_entry("streamer_tr", 0, init_net.proc_net, - streamer_proc_info, NULL); - streamer_priv->next = dev_streamer; - dev_streamer = streamer_priv; -#endif -#endif - - rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); - if (rc) { - printk(KERN_ERR "%s: No suitable PCI mapping available.\n", - dev->name); - rc = -ENODEV; - goto err_out; - } - - rc = pci_enable_device(pdev); - if (rc) { - printk(KERN_ERR "lanstreamer: unable to enable pci device\n"); - rc=-EIO; - goto err_out; - } - - pci_set_master(pdev); - - rc = pci_set_mwi(pdev); - if (rc) { - printk(KERN_ERR "lanstreamer: unable to enable MWI on pci device\n"); - goto err_out_disable; - } - - pio_start = pci_resource_start(pdev, 0); - pio_end = pci_resource_end(pdev, 0); - pio_flags = pci_resource_flags(pdev, 0); - pio_len = pci_resource_len(pdev, 0); - - mmio_start = pci_resource_start(pdev, 1); - mmio_end = pci_resource_end(pdev, 1); - mmio_flags = pci_resource_flags(pdev, 1); - mmio_len = pci_resource_len(pdev, 1); - -#if STREAMER_DEBUG - printk("lanstreamer: pio_start %x pio_end %x pio_len %x pio_flags %x\n", - pio_start, pio_end, pio_len, pio_flags); - printk("lanstreamer: mmio_start %x mmio_end %x mmio_len %x mmio_flags %x\n", - mmio_start, mmio_end, mmio_flags, mmio_len); -#endif - - if (!request_region(pio_start, pio_len, "lanstreamer")) { - printk(KERN_ERR "lanstreamer: unable to get pci io addr %lx\n", - pio_start); - rc= -EBUSY; - goto err_out_mwi; - } - - if (!request_mem_region(mmio_start, mmio_len, "lanstreamer")) { - printk(KERN_ERR "lanstreamer: unable to get pci mmio addr %lx\n", - mmio_start); - rc= -EBUSY; - goto err_out_free_pio; - } - - streamer_priv->streamer_mmio=ioremap(mmio_start, mmio_len); - if (streamer_priv->streamer_mmio == NULL) { - printk(KERN_ERR "lanstreamer: unable to remap MMIO %lx\n", - mmio_start); - rc= -EIO; - goto err_out_free_mmio; - } - - init_waitqueue_head(&streamer_priv->srb_wait); - init_waitqueue_head(&streamer_priv->trb_wait); - - dev->netdev_ops = &streamer_netdev_ops; - dev->irq = pdev->irq; - dev->base_addr=pio_start; - SET_NETDEV_DEV(dev, &pdev->dev); - - streamer_priv->streamer_card_name = (char *)pdev->resource[0].name; - streamer_priv->pci_dev = pdev; - - if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000)) - streamer_priv->pkt_buf_sz = PKT_BUF_SZ; - else - streamer_priv->pkt_buf_sz = pkt_buf_sz[card_no]; - - streamer_priv->streamer_ring_speed = ringspeed[card_no]; - streamer_priv->streamer_message_level = message_level[card_no]; - - pci_set_drvdata(pdev, dev); - - spin_lock_init(&streamer_priv->streamer_lock); - - pci_read_config_word (pdev, PCI_COMMAND, &pcr); - pcr |= PCI_COMMAND_SERR; - pci_write_config_word (pdev, PCI_COMMAND, pcr); - - printk("%s\n", version); - printk("%s: %s. I/O at %hx, MMIO at %p, using irq %d\n",dev->name, - streamer_priv->streamer_card_name, - (unsigned int) dev->base_addr, - streamer_priv->streamer_mmio, - dev->irq); - - if (streamer_reset(dev)) - goto err_out_unmap; - - rc = register_netdev(dev); - if (rc) - goto err_out_unmap; - return 0; - -err_out_unmap: - iounmap(streamer_priv->streamer_mmio); -err_out_free_mmio: - release_mem_region(mmio_start, mmio_len); -err_out_free_pio: - release_region(pio_start, pio_len); -err_out_mwi: - pci_clear_mwi(pdev); -err_out_disable: - pci_disable_device(pdev); -err_out: - free_netdev(dev); -#if STREAMER_DEBUG - printk("lanstreamer: Exit error %x\n",rc); -#endif - return rc; -} - -static void __devexit streamer_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev=pci_get_drvdata(pdev); - struct streamer_private *streamer_priv; - -#if STREAMER_DEBUG - printk("lanstreamer::streamer_remove_one entry pdev %p\n",pdev); -#endif - - if (dev == NULL) { - printk(KERN_ERR "lanstreamer::streamer_remove_one, ERROR dev is NULL\n"); - return; - } - - streamer_priv=netdev_priv(dev); - if (streamer_priv == NULL) { - printk(KERN_ERR "lanstreamer::streamer_remove_one, ERROR dev->priv is NULL\n"); - return; - } - -#if STREAMER_NETWORK_MONITOR -#ifdef CONFIG_PROC_FS - { - struct streamer_private **p, **next; - - for (p = &dev_streamer; *p; p = next) { - next = &(*p)->next; - if (*p == streamer_priv) { - *p = *next; - break; - } - } - if (!dev_streamer) - remove_proc_entry("streamer_tr", init_net.proc_net); - } -#endif -#endif - - unregister_netdev(dev); - iounmap(streamer_priv->streamer_mmio); - release_mem_region(pci_resource_start(pdev, 1), pci_resource_len(pdev,1)); - release_region(pci_resource_start(pdev, 0), pci_resource_len(pdev,0)); - pci_clear_mwi(pdev); - pci_disable_device(pdev); - free_netdev(dev); - pci_set_drvdata(pdev, NULL); -} - - -static int streamer_reset(struct net_device *dev) -{ - struct streamer_private *streamer_priv; - __u8 __iomem *streamer_mmio; - unsigned long t; - unsigned int uaa_addr; - struct sk_buff *skb = NULL; - __u16 misr; - - streamer_priv = netdev_priv(dev); - streamer_mmio = streamer_priv->streamer_mmio; - - writew(readw(streamer_mmio + BCTL) | BCTL_SOFTRESET, streamer_mmio + BCTL); - t = jiffies; - /* Hold soft reset bit for a while */ - ssleep(1); - - writew(readw(streamer_mmio + BCTL) & ~BCTL_SOFTRESET, - streamer_mmio + BCTL); - -#if STREAMER_DEBUG - printk("BCTL: %x\n", readw(streamer_mmio + BCTL)); - printk("GPR: %x\n", readw(streamer_mmio + GPR)); - printk("SISRMASK: %x\n", readw(streamer_mmio + SISR_MASK)); -#endif - writew(readw(streamer_mmio + BCTL) | (BCTL_RX_FIFO_8 | BCTL_TX_FIFO_8), streamer_mmio + BCTL ); - - if (streamer_priv->streamer_ring_speed == 0) { /* Autosense */ - writew(readw(streamer_mmio + GPR) | GPR_AUTOSENSE, - streamer_mmio + GPR); - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Ringspeed autosense mode on\n", - dev->name); - } else if (streamer_priv->streamer_ring_speed == 16) { - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", - dev->name); - writew(GPR_16MBPS, streamer_mmio + GPR); - } else if (streamer_priv->streamer_ring_speed == 4) { - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", - dev->name); - writew(0, streamer_mmio + GPR); - } - - skb = dev_alloc_skb(streamer_priv->pkt_buf_sz); - if (!skb) { - printk(KERN_INFO "%s: skb allocation for diagnostics failed...proceeding\n", - dev->name); - } else { - struct streamer_rx_desc *rx_ring; - u8 *data; - - rx_ring=(struct streamer_rx_desc *)skb->data; - data=((u8 *)skb->data)+sizeof(struct streamer_rx_desc); - rx_ring->forward=0; - rx_ring->status=0; - rx_ring->buffer=cpu_to_le32(pci_map_single(streamer_priv->pci_dev, data, - 512, PCI_DMA_FROMDEVICE)); - rx_ring->framelen_buflen=512; - writel(cpu_to_le32(pci_map_single(streamer_priv->pci_dev, rx_ring, 512, PCI_DMA_FROMDEVICE)), - streamer_mmio+RXBDA); - } - -#if STREAMER_DEBUG - printk("GPR = %x\n", readw(streamer_mmio + GPR)); -#endif - /* start solo init */ - writew(SISR_MI, streamer_mmio + SISR_MASK_SUM); - - while (!((readw(streamer_mmio + SISR)) & SISR_SRB_REPLY)) { - msleep_interruptible(100); - if (time_after(jiffies, t + 40 * HZ)) { - printk(KERN_ERR - "IBM PCI tokenring card not responding\n"); - release_region(dev->base_addr, STREAMER_IO_SPACE); - if (skb) - dev_kfree_skb(skb); - return -1; - } - } - writew(~SISR_SRB_REPLY, streamer_mmio + SISR_RUM); - misr = readw(streamer_mmio + MISR_RUM); - writew(~misr, streamer_mmio + MISR_RUM); - - if (skb) - dev_kfree_skb(skb); /* release skb used for diagnostics */ - -#if STREAMER_DEBUG - printk("LAPWWO: %x, LAPA: %x LAPE: %x\n", - readw(streamer_mmio + LAPWWO), readw(streamer_mmio + LAPA), - readw(streamer_mmio + LAPE)); -#endif - -#if STREAMER_DEBUG - { - int i; - writew(readw(streamer_mmio + LAPWWO), - streamer_mmio + LAPA); - printk("initialization response srb dump: "); - for (i = 0; i < 10; i++) - printk("%x:", - ntohs(readw(streamer_mmio + LAPDINC))); - printk("\n"); - } -#endif - - writew(readw(streamer_mmio + LAPWWO) + 6, streamer_mmio + LAPA); - if (readw(streamer_mmio + LAPD)) { - printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n", - ntohs(readw(streamer_mmio + LAPD))); - release_region(dev->base_addr, STREAMER_IO_SPACE); - return -1; - } - - writew(readw(streamer_mmio + LAPWWO) + 8, streamer_mmio + LAPA); - uaa_addr = ntohs(readw(streamer_mmio + LAPDINC)); - readw(streamer_mmio + LAPDINC); /* skip over Level.Addr field */ - streamer_priv->streamer_addr_table_addr = ntohs(readw(streamer_mmio + LAPDINC)); - streamer_priv->streamer_parms_addr = ntohs(readw(streamer_mmio + LAPDINC)); - -#if STREAMER_DEBUG - printk("UAA resides at %x\n", uaa_addr); -#endif - - /* setup uaa area for access with LAPD */ - { - int i; - __u16 addr; - writew(uaa_addr, streamer_mmio + LAPA); - for (i = 0; i < 6; i += 2) { - addr=ntohs(readw(streamer_mmio+LAPDINC)); - dev->dev_addr[i]= (addr >> 8) & 0xff; - dev->dev_addr[i+1]= addr & 0xff; - } -#if STREAMER_DEBUG - printk("Adapter address: %pM\n", dev->dev_addr); -#endif - } - return 0; -} - -static int streamer_open(struct net_device *dev) -{ - struct streamer_private *streamer_priv = netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - unsigned long flags; - char open_error[255]; - int i, open_finished = 1; - __u16 srb_word; - __u16 srb_open; - int rc; - - if (readw(streamer_mmio+BMCTL_SUM) & BMCTL_RX_ENABLED) { - rc=streamer_reset(dev); - } - - if (request_irq(dev->irq, streamer_interrupt, IRQF_SHARED, "lanstreamer", dev)) { - return -EAGAIN; - } -#if STREAMER_DEBUG - printk("BMCTL: %x\n", readw(streamer_mmio + BMCTL_SUM)); - printk("pending ints: %x\n", readw(streamer_mmio + SISR)); -#endif - - writew(SISR_MI | SISR_SRB_REPLY, streamer_mmio + SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */ - writew(LISR_LIE, streamer_mmio + LISR); /* more ints later */ - - /* adapter is closed, so SRB is pointed to by LAPWWO */ - writew(readw(streamer_mmio + LAPWWO), streamer_mmio + LAPA); - -#if STREAMER_DEBUG - printk("LAPWWO: %x, LAPA: %x\n", readw(streamer_mmio + LAPWWO), - readw(streamer_mmio + LAPA)); - printk("LAPE: %x\n", readw(streamer_mmio + LAPE)); - printk("SISR Mask = %04x\n", readw(streamer_mmio + SISR_MASK)); -#endif - do { - for (i = 0; i < SRB_COMMAND_SIZE; i += 2) { - writew(0, streamer_mmio + LAPDINC); - } - - writew(readw(streamer_mmio+LAPWWO),streamer_mmio+LAPA); - writew(htons(SRB_OPEN_ADAPTER<<8),streamer_mmio+LAPDINC) ; /* open */ - writew(htons(STREAMER_CLEAR_RET_CODE<<8),streamer_mmio+LAPDINC); - writew(STREAMER_CLEAR_RET_CODE, streamer_mmio + LAPDINC); - - writew(readw(streamer_mmio + LAPWWO) + 8, streamer_mmio + LAPA); -#if STREAMER_NETWORK_MONITOR - /* If Network Monitor, instruct card to copy MAC frames through the ARB */ - writew(htons(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON), streamer_mmio + LAPDINC); /* offset 8 word contains open options */ -#else - writew(htons(OPEN_ADAPTER_ENABLE_FDX), streamer_mmio + LAPDINC); /* Offset 8 word contains Open.Options */ -#endif - - if (streamer_priv->streamer_laa[0]) { - writew(readw(streamer_mmio + LAPWWO) + 12, streamer_mmio + LAPA); - writew(htons((streamer_priv->streamer_laa[0] << 8) | - streamer_priv->streamer_laa[1]),streamer_mmio+LAPDINC); - writew(htons((streamer_priv->streamer_laa[2] << 8) | - streamer_priv->streamer_laa[3]),streamer_mmio+LAPDINC); - writew(htons((streamer_priv->streamer_laa[4] << 8) | - streamer_priv->streamer_laa[5]),streamer_mmio+LAPDINC); - memcpy(dev->dev_addr, streamer_priv->streamer_laa, dev->addr_len); - } - - /* save off srb open offset */ - srb_open = readw(streamer_mmio + LAPWWO); -#if STREAMER_DEBUG - writew(readw(streamer_mmio + LAPWWO), - streamer_mmio + LAPA); - printk("srb open request:\n"); - for (i = 0; i < 16; i++) { - printk("%x:", ntohs(readw(streamer_mmio + LAPDINC))); - } - printk("\n"); -#endif - spin_lock_irqsave(&streamer_priv->streamer_lock, flags); - streamer_priv->srb_queued = 1; - - /* signal solo that SRB command has been issued */ - writew(LISR_SRB_CMD, streamer_mmio + LISR_SUM); - spin_unlock_irqrestore(&streamer_priv->streamer_lock, flags); - - while (streamer_priv->srb_queued) { - interruptible_sleep_on_timeout(&streamer_priv->srb_wait, 5 * HZ); - if (signal_pending(current)) { - printk(KERN_WARNING "%s: SRB timed out.\n", dev->name); - printk(KERN_WARNING "SISR=%x MISR=%x, LISR=%x\n", - readw(streamer_mmio + SISR), - readw(streamer_mmio + MISR_RUM), - readw(streamer_mmio + LISR)); - streamer_priv->srb_queued = 0; - break; - } - } - -#if STREAMER_DEBUG - printk("SISR_MASK: %x\n", readw(streamer_mmio + SISR_MASK)); - printk("srb open response:\n"); - writew(srb_open, streamer_mmio + LAPA); - for (i = 0; i < 10; i++) { - printk("%x:", - ntohs(readw(streamer_mmio + LAPDINC))); - } -#endif - - /* If we get the same return response as we set, the interrupt wasn't raised and the open - * timed out. - */ - writew(srb_open + 2, streamer_mmio + LAPA); - srb_word = ntohs(readw(streamer_mmio + LAPD)) >> 8; - if (srb_word == STREAMER_CLEAR_RET_CODE) { - printk(KERN_WARNING "%s: Adapter Open time out or error.\n", - dev->name); - return -EIO; - } - - if (srb_word != 0) { - if (srb_word == 0x07) { - if (!streamer_priv->streamer_ring_speed && open_finished) { /* Autosense , first time around */ - printk(KERN_WARNING "%s: Retrying at different ring speed\n", - dev->name); - open_finished = 0; - } else { - __u16 error_code; - - writew(srb_open + 6, streamer_mmio + LAPA); - error_code = ntohs(readw(streamer_mmio + LAPD)); - strcpy(open_error, open_maj_error[(error_code & 0xf0) >> 4]); - strcat(open_error, " - "); - strcat(open_error, open_min_error[(error_code & 0x0f)]); - - if (!streamer_priv->streamer_ring_speed && - ((error_code & 0x0f) == 0x0d)) - { - printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n", dev->name); - printk(KERN_WARNING "%s: Please try again with a specified ring speed\n", dev->name); - free_irq(dev->irq, dev); - return -EIO; - } - - printk(KERN_WARNING "%s: %s\n", - dev->name, open_error); - free_irq(dev->irq, dev); - return -EIO; - - } /* if autosense && open_finished */ - } else { - printk(KERN_WARNING "%s: Bad OPEN response: %x\n", - dev->name, srb_word); - free_irq(dev->irq, dev); - return -EIO; - } - } else - open_finished = 1; - } while (!(open_finished)); /* Will only loop if ring speed mismatch re-open attempted && autosense is on */ - - writew(srb_open + 18, streamer_mmio + LAPA); - srb_word=ntohs(readw(streamer_mmio+LAPD)) >> 8; - if (srb_word & (1 << 3)) - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Opened in FDX Mode\n", dev->name); - - if (srb_word & 1) - streamer_priv->streamer_ring_speed = 16; - else - streamer_priv->streamer_ring_speed = 4; - - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Opened in %d Mbps mode\n", - dev->name, - streamer_priv->streamer_ring_speed); - - writew(srb_open + 8, streamer_mmio + LAPA); - streamer_priv->asb = ntohs(readw(streamer_mmio + LAPDINC)); - streamer_priv->srb = ntohs(readw(streamer_mmio + LAPDINC)); - streamer_priv->arb = ntohs(readw(streamer_mmio + LAPDINC)); - readw(streamer_mmio + LAPDINC); /* offset 14 word is rsvd */ - streamer_priv->trb = ntohs(readw(streamer_mmio + LAPDINC)); - - streamer_priv->streamer_receive_options = 0x00; - streamer_priv->streamer_copy_all_options = 0; - - /* setup rx ring */ - /* enable rx channel */ - writew(~BMCTL_RX_DIS, streamer_mmio + BMCTL_RUM); - - /* setup rx descriptors */ - streamer_priv->streamer_rx_ring= - kmalloc( sizeof(struct streamer_rx_desc)* - STREAMER_RX_RING_SIZE,GFP_KERNEL); - if (!streamer_priv->streamer_rx_ring) { - printk(KERN_WARNING "%s ALLOC of streamer rx ring FAILED!!\n",dev->name); - return -EIO; - } - - for (i = 0; i < STREAMER_RX_RING_SIZE; i++) { - struct sk_buff *skb; - - skb = dev_alloc_skb(streamer_priv->pkt_buf_sz); - if (skb == NULL) - break; - - skb->dev = dev; - - streamer_priv->streamer_rx_ring[i].forward = - cpu_to_le32(pci_map_single(streamer_priv->pci_dev, &streamer_priv->streamer_rx_ring[i + 1], - sizeof(struct streamer_rx_desc), PCI_DMA_FROMDEVICE)); - streamer_priv->streamer_rx_ring[i].status = 0; - streamer_priv->streamer_rx_ring[i].buffer = - cpu_to_le32(pci_map_single(streamer_priv->pci_dev, skb->data, - streamer_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); - streamer_priv->streamer_rx_ring[i].framelen_buflen = streamer_priv->pkt_buf_sz; - streamer_priv->rx_ring_skb[i] = skb; - } - streamer_priv->streamer_rx_ring[STREAMER_RX_RING_SIZE - 1].forward = - cpu_to_le32(pci_map_single(streamer_priv->pci_dev, &streamer_priv->streamer_rx_ring[0], - sizeof(struct streamer_rx_desc), PCI_DMA_FROMDEVICE)); - - if (i == 0) { - printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n", dev->name); - free_irq(dev->irq, dev); - return -EIO; - } - - streamer_priv->rx_ring_last_received = STREAMER_RX_RING_SIZE - 1; /* last processed rx status */ - - writel(cpu_to_le32(pci_map_single(streamer_priv->pci_dev, &streamer_priv->streamer_rx_ring[0], - sizeof(struct streamer_rx_desc), PCI_DMA_TODEVICE)), - streamer_mmio + RXBDA); - writel(cpu_to_le32(pci_map_single(streamer_priv->pci_dev, &streamer_priv->streamer_rx_ring[STREAMER_RX_RING_SIZE - 1], - sizeof(struct streamer_rx_desc), PCI_DMA_TODEVICE)), - streamer_mmio + RXLBDA); - - /* set bus master interrupt event mask */ - writew(MISR_RX_NOBUF | MISR_RX_EOF, streamer_mmio + MISR_MASK); - - - /* setup tx ring */ - streamer_priv->streamer_tx_ring=kmalloc(sizeof(struct streamer_tx_desc)* - STREAMER_TX_RING_SIZE,GFP_KERNEL); - if (!streamer_priv->streamer_tx_ring) { - printk(KERN_WARNING "%s ALLOC of streamer_tx_ring FAILED\n",dev->name); - return -EIO; - } - - writew(~BMCTL_TX2_DIS, streamer_mmio + BMCTL_RUM); /* Enables TX channel 2 */ - for (i = 0; i < STREAMER_TX_RING_SIZE; i++) { - streamer_priv->streamer_tx_ring[i].forward = cpu_to_le32(pci_map_single(streamer_priv->pci_dev, - &streamer_priv->streamer_tx_ring[i + 1], - sizeof(struct streamer_tx_desc), - PCI_DMA_TODEVICE)); - streamer_priv->streamer_tx_ring[i].status = 0; - streamer_priv->streamer_tx_ring[i].bufcnt_framelen = 0; - streamer_priv->streamer_tx_ring[i].buffer = 0; - streamer_priv->streamer_tx_ring[i].buflen = 0; - streamer_priv->streamer_tx_ring[i].rsvd1 = 0; - streamer_priv->streamer_tx_ring[i].rsvd2 = 0; - streamer_priv->streamer_tx_ring[i].rsvd3 = 0; - } - streamer_priv->streamer_tx_ring[STREAMER_TX_RING_SIZE - 1].forward = - cpu_to_le32(pci_map_single(streamer_priv->pci_dev, &streamer_priv->streamer_tx_ring[0], - sizeof(struct streamer_tx_desc), PCI_DMA_TODEVICE)); - - streamer_priv->free_tx_ring_entries = STREAMER_TX_RING_SIZE; - streamer_priv->tx_ring_free = 0; /* next entry in tx ring to use */ - streamer_priv->tx_ring_last_status = STREAMER_TX_RING_SIZE - 1; - - /* set Busmaster interrupt event mask (handle receives on interrupt only */ - writew(MISR_TX2_EOF | MISR_RX_NOBUF | MISR_RX_EOF, streamer_mmio + MISR_MASK); - /* set system event interrupt mask */ - writew(SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE, streamer_mmio + SISR_MASK_SUM); - -#if STREAMER_DEBUG - printk("BMCTL: %x\n", readw(streamer_mmio + BMCTL_SUM)); - printk("SISR MASK: %x\n", readw(streamer_mmio + SISR_MASK)); -#endif - -#if STREAMER_NETWORK_MONITOR - - writew(streamer_priv->streamer_addr_table_addr, streamer_mmio + LAPA); - printk("%s: Node Address: %04x:%04x:%04x\n", dev->name, - ntohs(readw(streamer_mmio + LAPDINC)), - ntohs(readw(streamer_mmio + LAPDINC)), - ntohs(readw(streamer_mmio + LAPDINC))); - readw(streamer_mmio + LAPDINC); - readw(streamer_mmio + LAPDINC); - printk("%s: Functional Address: %04x:%04x\n", dev->name, - ntohs(readw(streamer_mmio + LAPDINC)), - ntohs(readw(streamer_mmio + LAPDINC))); - - writew(streamer_priv->streamer_parms_addr + 4, - streamer_mmio + LAPA); - printk("%s: NAUN Address: %04x:%04x:%04x\n", dev->name, - ntohs(readw(streamer_mmio + LAPDINC)), - ntohs(readw(streamer_mmio + LAPDINC)), - ntohs(readw(streamer_mmio + LAPDINC))); -#endif - - netif_start_queue(dev); - netif_carrier_on(dev); - return 0; -} - -/* - * When we enter the rx routine we do not know how many frames have been - * queued on the rx channel. Therefore we start at the next rx status - * position and travel around the receive ring until we have completed - * all the frames. - * - * This means that we may process the frame before we receive the end - * of frame interrupt. This is why we always test the status instead - * of blindly processing the next frame. - * - */ -static void streamer_rx(struct net_device *dev) -{ - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - struct streamer_rx_desc *rx_desc; - int rx_ring_last_received, length, frame_length, buffer_cnt = 0; - struct sk_buff *skb, *skb2; - - /* setup the next rx descriptor to be received */ - rx_desc = &streamer_priv->streamer_rx_ring[(streamer_priv->rx_ring_last_received + 1) & (STREAMER_RX_RING_SIZE - 1)]; - rx_ring_last_received = streamer_priv->rx_ring_last_received; - - while (rx_desc->status & 0x01000000) { /* While processed descriptors are available */ - if (rx_ring_last_received != streamer_priv->rx_ring_last_received) - { - printk(KERN_WARNING "RX Error 1 rx_ring_last_received not the same %x %x\n", - rx_ring_last_received, streamer_priv->rx_ring_last_received); - } - streamer_priv->rx_ring_last_received = (streamer_priv->rx_ring_last_received + 1) & (STREAMER_RX_RING_SIZE - 1); - rx_ring_last_received = streamer_priv->rx_ring_last_received; - - length = rx_desc->framelen_buflen & 0xffff; /* buffer length */ - frame_length = (rx_desc->framelen_buflen >> 16) & 0xffff; - - if (rx_desc->status & 0x7E830000) { /* errors */ - if (streamer_priv->streamer_message_level) { - printk(KERN_WARNING "%s: Rx Error %x\n", - dev->name, rx_desc->status); - } - } else { /* received without errors */ - if (rx_desc->status & 0x80000000) { /* frame complete */ - buffer_cnt = 1; - skb = dev_alloc_skb(streamer_priv->pkt_buf_sz); - } else { - skb = dev_alloc_skb(frame_length); - } - - if (skb == NULL) - { - printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers.\n", dev->name); - dev->stats.rx_dropped++; - } else { /* we allocated an skb OK */ - if (buffer_cnt == 1) { - /* release the DMA mapping */ - pci_unmap_single(streamer_priv->pci_dev, - le32_to_cpu(streamer_priv->streamer_rx_ring[rx_ring_last_received].buffer), - streamer_priv->pkt_buf_sz, - PCI_DMA_FROMDEVICE); - skb2 = streamer_priv->rx_ring_skb[rx_ring_last_received]; -#if STREAMER_DEBUG_PACKETS - { - int i; - printk("streamer_rx packet print: skb->data2 %p skb->head %p\n", skb2->data, skb2->head); - for (i = 0; i < frame_length; i++) - { - printk("%x:", skb2->data[i]); - if (((i + 1) % 16) == 0) - printk("\n"); - } - printk("\n"); - } -#endif - skb_put(skb2, length); - skb2->protocol = tr_type_trans(skb2, dev); - /* recycle this descriptor */ - streamer_priv->streamer_rx_ring[rx_ring_last_received].status = 0; - streamer_priv->streamer_rx_ring[rx_ring_last_received].framelen_buflen = streamer_priv->pkt_buf_sz; - streamer_priv->streamer_rx_ring[rx_ring_last_received].buffer = - cpu_to_le32(pci_map_single(streamer_priv->pci_dev, skb->data, streamer_priv->pkt_buf_sz, - PCI_DMA_FROMDEVICE)); - streamer_priv->rx_ring_skb[rx_ring_last_received] = skb; - /* place recycled descriptor back on the adapter */ - writel(cpu_to_le32(pci_map_single(streamer_priv->pci_dev, - &streamer_priv->streamer_rx_ring[rx_ring_last_received], - sizeof(struct streamer_rx_desc), PCI_DMA_FROMDEVICE)), - streamer_mmio + RXLBDA); - /* pass the received skb up to the protocol */ - netif_rx(skb2); - } else { - do { /* Walk the buffers */ - pci_unmap_single(streamer_priv->pci_dev, le32_to_cpu(rx_desc->buffer), length, PCI_DMA_FROMDEVICE), - memcpy(skb_put(skb, length), (void *)rx_desc->buffer, length); /* copy this fragment */ - streamer_priv->streamer_rx_ring[rx_ring_last_received].status = 0; - streamer_priv->streamer_rx_ring[rx_ring_last_received].framelen_buflen = streamer_priv->pkt_buf_sz; - - /* give descriptor back to the adapter */ - writel(cpu_to_le32(pci_map_single(streamer_priv->pci_dev, - &streamer_priv->streamer_rx_ring[rx_ring_last_received], - length, PCI_DMA_FROMDEVICE)), - streamer_mmio + RXLBDA); - - if (rx_desc->status & 0x80000000) - break; /* this descriptor completes the frame */ - - /* else get the next pending descriptor */ - if (rx_ring_last_received!= streamer_priv->rx_ring_last_received) - { - printk("RX Error rx_ring_last_received not the same %x %x\n", - rx_ring_last_received, - streamer_priv->rx_ring_last_received); - } - rx_desc = &streamer_priv->streamer_rx_ring[(streamer_priv->rx_ring_last_received+1) & (STREAMER_RX_RING_SIZE-1)]; - - length = rx_desc->framelen_buflen & 0xffff; /* buffer length */ - streamer_priv->rx_ring_last_received = (streamer_priv->rx_ring_last_received+1) & (STREAMER_RX_RING_SIZE - 1); - rx_ring_last_received = streamer_priv->rx_ring_last_received; - } while (1); - - skb->protocol = tr_type_trans(skb, dev); - /* send up to the protocol */ - netif_rx(skb); - } - dev->stats.rx_packets++; - dev->stats.rx_bytes += length; - } /* if skb == null */ - } /* end received without errors */ - - /* try the next one */ - rx_desc = &streamer_priv->streamer_rx_ring[(rx_ring_last_received + 1) & (STREAMER_RX_RING_SIZE - 1)]; - } /* end for all completed rx descriptors */ -} - -static irqreturn_t streamer_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *) dev_id; - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - __u16 sisr; - __u16 misr; - u8 max_intr = MAX_INTR; - - spin_lock(&streamer_priv->streamer_lock); - sisr = readw(streamer_mmio + SISR); - - while((sisr & (SISR_MI | SISR_SRB_REPLY | SISR_ADAPTER_CHECK | SISR_ASB_FREE | - SISR_ARB_CMD | SISR_TRB_REPLY | SISR_PAR_ERR | SISR_SERR_ERR)) && - (max_intr > 0)) { - - if(sisr & SISR_PAR_ERR) { - writew(~SISR_PAR_ERR, streamer_mmio + SISR_RUM); - (void)readw(streamer_mmio + SISR_RUM); - } - - else if(sisr & SISR_SERR_ERR) { - writew(~SISR_SERR_ERR, streamer_mmio + SISR_RUM); - (void)readw(streamer_mmio + SISR_RUM); - } - - else if(sisr & SISR_MI) { - misr = readw(streamer_mmio + MISR_RUM); - - if (misr & MISR_TX2_EOF) { - while(streamer_priv->streamer_tx_ring[(streamer_priv->tx_ring_last_status + 1) & (STREAMER_TX_RING_SIZE - 1)].status) { - streamer_priv->tx_ring_last_status = (streamer_priv->tx_ring_last_status + 1) & (STREAMER_TX_RING_SIZE - 1); - streamer_priv->free_tx_ring_entries++; - dev->stats.tx_bytes += streamer_priv->tx_ring_skb[streamer_priv->tx_ring_last_status]->len; - dev->stats.tx_packets++; - dev_kfree_skb_irq(streamer_priv->tx_ring_skb[streamer_priv->tx_ring_last_status]); - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_last_status].buffer = 0xdeadbeef; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_last_status].status = 0; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_last_status].bufcnt_framelen = 0; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_last_status].buflen = 0; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_last_status].rsvd1 = 0; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_last_status].rsvd2 = 0; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_last_status].rsvd3 = 0; - } - netif_wake_queue(dev); - } - - if (misr & MISR_RX_EOF) { - streamer_rx(dev); - } - /* MISR_RX_EOF */ - - if (misr & MISR_RX_NOBUF) { - /* According to the documentation, we don't have to do anything, - * but trapping it keeps it out of /var/log/messages. - */ - } /* SISR_RX_NOBUF */ - - writew(~misr, streamer_mmio + MISR_RUM); - (void)readw(streamer_mmio + MISR_RUM); - } - - else if (sisr & SISR_SRB_REPLY) { - if (streamer_priv->srb_queued == 1) { - wake_up_interruptible(&streamer_priv->srb_wait); - } else if (streamer_priv->srb_queued == 2) { - streamer_srb_bh(dev); - } - streamer_priv->srb_queued = 0; - - writew(~SISR_SRB_REPLY, streamer_mmio + SISR_RUM); - (void)readw(streamer_mmio + SISR_RUM); - } - - else if (sisr & SISR_ADAPTER_CHECK) { - printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name); - writel(readl(streamer_mmio + LAPWWO), streamer_mmio + LAPA); - printk(KERN_WARNING "%s: Words %x:%x:%x:%x:\n", - dev->name, readw(streamer_mmio + LAPDINC), - ntohs(readw(streamer_mmio + LAPDINC)), - ntohs(readw(streamer_mmio + LAPDINC)), - ntohs(readw(streamer_mmio + LAPDINC))); - netif_stop_queue(dev); - netif_carrier_off(dev); - printk(KERN_WARNING "%s: Adapter must be manually reset.\n", dev->name); - } - - /* SISR_ADAPTER_CHECK */ - else if (sisr & SISR_ASB_FREE) { - /* Wake up anything that is waiting for the asb response */ - if (streamer_priv->asb_queued) { - streamer_asb_bh(dev); - } - writew(~SISR_ASB_FREE, streamer_mmio + SISR_RUM); - (void)readw(streamer_mmio + SISR_RUM); - } - /* SISR_ASB_FREE */ - else if (sisr & SISR_ARB_CMD) { - streamer_arb_cmd(dev); - writew(~SISR_ARB_CMD, streamer_mmio + SISR_RUM); - (void)readw(streamer_mmio + SISR_RUM); - } - /* SISR_ARB_CMD */ - else if (sisr & SISR_TRB_REPLY) { - /* Wake up anything that is waiting for the trb response */ - if (streamer_priv->trb_queued) { - wake_up_interruptible(&streamer_priv-> - trb_wait); - } - streamer_priv->trb_queued = 0; - writew(~SISR_TRB_REPLY, streamer_mmio + SISR_RUM); - (void)readw(streamer_mmio + SISR_RUM); - } - /* SISR_TRB_REPLY */ - - sisr = readw(streamer_mmio + SISR); - max_intr--; - } /* while() */ - - spin_unlock(&streamer_priv->streamer_lock) ; - return IRQ_HANDLED; -} - -static netdev_tx_t streamer_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - unsigned long flags ; - - spin_lock_irqsave(&streamer_priv->streamer_lock, flags); - - if (streamer_priv->free_tx_ring_entries) { - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_free].status = 0; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_free].bufcnt_framelen = 0x00020000 | skb->len; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_free].buffer = - cpu_to_le32(pci_map_single(streamer_priv->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE)); - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_free].rsvd1 = skb->len; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_free].rsvd2 = 0; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_free].rsvd3 = 0; - streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_free].buflen = skb->len; - - streamer_priv->tx_ring_skb[streamer_priv->tx_ring_free] = skb; - streamer_priv->free_tx_ring_entries--; -#if STREAMER_DEBUG_PACKETS - { - int i; - printk("streamer_xmit packet print:\n"); - for (i = 0; i < skb->len; i++) { - printk("%x:", skb->data[i]); - if (((i + 1) % 16) == 0) - printk("\n"); - } - printk("\n"); - } -#endif - - writel(cpu_to_le32(pci_map_single(streamer_priv->pci_dev, - &streamer_priv->streamer_tx_ring[streamer_priv->tx_ring_free], - sizeof(struct streamer_tx_desc), PCI_DMA_TODEVICE)), - streamer_mmio + TX2LFDA); - (void)readl(streamer_mmio + TX2LFDA); - - streamer_priv->tx_ring_free = (streamer_priv->tx_ring_free + 1) & (STREAMER_TX_RING_SIZE - 1); - spin_unlock_irqrestore(&streamer_priv->streamer_lock,flags); - return NETDEV_TX_OK; - } else { - netif_stop_queue(dev); - spin_unlock_irqrestore(&streamer_priv->streamer_lock,flags); - return NETDEV_TX_BUSY; - } -} - - -static int streamer_close(struct net_device *dev) -{ - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - unsigned long flags; - int i; - - netif_stop_queue(dev); - netif_carrier_off(dev); - writew(streamer_priv->srb, streamer_mmio + LAPA); - writew(htons(SRB_CLOSE_ADAPTER << 8),streamer_mmio+LAPDINC); - writew(htons(STREAMER_CLEAR_RET_CODE << 8), streamer_mmio+LAPDINC); - - spin_lock_irqsave(&streamer_priv->streamer_lock, flags); - - streamer_priv->srb_queued = 1; - writew(LISR_SRB_CMD, streamer_mmio + LISR_SUM); - - spin_unlock_irqrestore(&streamer_priv->streamer_lock, flags); - - while (streamer_priv->srb_queued) - { - interruptible_sleep_on_timeout(&streamer_priv->srb_wait, - jiffies + 60 * HZ); - if (signal_pending(current)) - { - printk(KERN_WARNING "%s: SRB timed out.\n", dev->name); - printk(KERN_WARNING "SISR=%x MISR=%x LISR=%x\n", - readw(streamer_mmio + SISR), - readw(streamer_mmio + MISR_RUM), - readw(streamer_mmio + LISR)); - streamer_priv->srb_queued = 0; - break; - } - } - - streamer_priv->rx_ring_last_received = (streamer_priv->rx_ring_last_received + 1) & (STREAMER_RX_RING_SIZE - 1); - - for (i = 0; i < STREAMER_RX_RING_SIZE; i++) { - if (streamer_priv->rx_ring_skb[streamer_priv->rx_ring_last_received]) { - dev_kfree_skb(streamer_priv->rx_ring_skb[streamer_priv->rx_ring_last_received]); - } - streamer_priv->rx_ring_last_received = (streamer_priv->rx_ring_last_received + 1) & (STREAMER_RX_RING_SIZE - 1); - } - - /* reset tx/rx fifo's and busmaster logic */ - - /* TBD. Add graceful way to reset the LLC channel without doing a soft reset. - writel(readl(streamer_mmio+BCTL)|(3<<13),streamer_mmio+BCTL); - udelay(1); - writel(readl(streamer_mmio+BCTL)&~(3<<13),streamer_mmio+BCTL); - */ - -#if STREAMER_DEBUG - writew(streamer_priv->srb, streamer_mmio + LAPA); - printk("srb): "); - for (i = 0; i < 2; i++) { - printk("%x ", ntohs(readw(streamer_mmio + LAPDINC))); - } - printk("\n"); -#endif - free_irq(dev->irq, dev); - return 0; -} - -static void streamer_set_rx_mode(struct net_device *dev) -{ - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - __u8 options = 0; - struct netdev_hw_addr *ha; - unsigned char dev_mc_address[5]; - - writel(streamer_priv->srb, streamer_mmio + LAPA); - options = streamer_priv->streamer_copy_all_options; - - if (dev->flags & IFF_PROMISC) - options |= (3 << 5); /* All LLC and MAC frames, all through the main rx channel */ - else - options &= ~(3 << 5); - - /* Only issue the srb if there is a change in options */ - - if ((options ^ streamer_priv->streamer_copy_all_options)) - { - /* Now to issue the srb command to alter the copy.all.options */ - writew(htons(SRB_MODIFY_RECEIVE_OPTIONS << 8), streamer_mmio+LAPDINC); - writew(htons(STREAMER_CLEAR_RET_CODE << 8), streamer_mmio+LAPDINC); - writew(htons((streamer_priv->streamer_receive_options << 8) | options),streamer_mmio+LAPDINC); - writew(htons(0x4a41),streamer_mmio+LAPDINC); - writew(htons(0x4d45),streamer_mmio+LAPDINC); - writew(htons(0x5320),streamer_mmio+LAPDINC); - writew(0x2020, streamer_mmio + LAPDINC); - - streamer_priv->srb_queued = 2; /* Can't sleep, use srb_bh */ - - writel(LISR_SRB_CMD, streamer_mmio + LISR_SUM); - - streamer_priv->streamer_copy_all_options = options; - return; - } - - /* Set the functional addresses we need for multicast */ - writel(streamer_priv->srb,streamer_mmio+LAPA); - dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; - - netdev_for_each_mc_addr(ha, dev) { - dev_mc_address[0] |= ha->addr[2]; - dev_mc_address[1] |= ha->addr[3]; - dev_mc_address[2] |= ha->addr[4]; - dev_mc_address[3] |= ha->addr[5]; - } - - writew(htons(SRB_SET_FUNC_ADDRESS << 8),streamer_mmio+LAPDINC); - writew(htons(STREAMER_CLEAR_RET_CODE << 8), streamer_mmio+LAPDINC); - writew(0,streamer_mmio+LAPDINC); - writew(htons( (dev_mc_address[0] << 8) | dev_mc_address[1]),streamer_mmio+LAPDINC); - writew(htons( (dev_mc_address[2] << 8) | dev_mc_address[3]),streamer_mmio+LAPDINC); - streamer_priv->srb_queued = 2 ; - writel(LISR_SRB_CMD,streamer_mmio+LISR_SUM); -} - -static void streamer_srb_bh(struct net_device *dev) -{ - struct streamer_private *streamer_priv = netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - __u16 srb_word; - - writew(streamer_priv->srb, streamer_mmio + LAPA); - srb_word=ntohs(readw(streamer_mmio+LAPDINC)) >> 8; - - switch (srb_word) { - - /* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous) - * At some point we should do something if we get an error, such as - * resetting the IFF_PROMISC flag in dev - */ - - case SRB_MODIFY_RECEIVE_OPTIONS: - srb_word=ntohs(readw(streamer_mmio+LAPDINC)) >> 8; - - switch (srb_word) { - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name); - break; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name); - break; - default: - if (streamer_priv->streamer_message_level) - printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n", - dev->name, - streamer_priv->streamer_copy_all_options, - streamer_priv->streamer_receive_options); - break; - } /* switch srb[2] */ - break; - - - /* SRB_SET_GROUP_ADDRESS - Multicast group setting - */ - case SRB_SET_GROUP_ADDRESS: - srb_word=ntohs(readw(streamer_mmio+LAPDINC)) >> 8; - switch (srb_word) { - case 0x00: - break; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name); - break; - case 0x3c: - printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n", dev->name); - break; - case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */ - printk(KERN_WARNING "%s: Group address registers full\n", dev->name); - break; - case 0x55: - printk(KERN_INFO "%s: Group Address already set.\n", dev->name); - break; - default: - break; - } /* switch srb[2] */ - break; - - - /* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list - */ - case SRB_RESET_GROUP_ADDRESS: - srb_word=ntohs(readw(streamer_mmio+LAPDINC)) >> 8; - switch (srb_word) { - case 0x00: - break; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name); - break; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name); - break; - case 0x39: /* Must deal with this if individual multicast addresses used */ - printk(KERN_INFO "%s: Group address not found\n", dev->name); - break; - default: - break; - } /* switch srb[2] */ - break; - - - /* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode - */ - - case SRB_SET_FUNC_ADDRESS: - srb_word=ntohs(readw(streamer_mmio+LAPDINC)) >> 8; - switch (srb_word) { - case 0x00: - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Functional Address Mask Set\n", dev->name); - break; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name); - break; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name); - break; - default: - break; - } /* switch srb[2] */ - break; - - /* SRB_READ_LOG - Read and reset the adapter error counters - */ - - case SRB_READ_LOG: - srb_word=ntohs(readw(streamer_mmio+LAPDINC)) >> 8; - switch (srb_word) { - case 0x00: - { - int i; - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Read Log command complete\n", dev->name); - printk("Read Log statistics: "); - writew(streamer_priv->srb + 6, - streamer_mmio + LAPA); - for (i = 0; i < 5; i++) { - printk("%x:", ntohs(readw(streamer_mmio + LAPDINC))); - } - printk("\n"); - } - break; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name); - break; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name); - break; - - } /* switch srb[2] */ - break; - - /* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */ - - case SRB_READ_SR_COUNTERS: - srb_word=ntohs(readw(streamer_mmio+LAPDINC)) >> 8; - switch (srb_word) { - case 0x00: - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Read Source Routing Counters issued\n", dev->name); - break; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n", dev->name); - break; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n", dev->name); - break; - default: - break; - } /* switch srb[2] */ - break; - - default: - printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n", dev->name); - break; - } /* switch srb[0] */ -} - -static int streamer_set_mac_address(struct net_device *dev, void *addr) -{ - struct sockaddr *saddr = addr; - struct streamer_private *streamer_priv = netdev_priv(dev); - - if (netif_running(dev)) - { - printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name); - return -EIO; - } - - memcpy(streamer_priv->streamer_laa, saddr->sa_data, dev->addr_len); - - if (streamer_priv->streamer_message_level) { - printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n", - dev->name, streamer_priv->streamer_laa[0], - streamer_priv->streamer_laa[1], - streamer_priv->streamer_laa[2], - streamer_priv->streamer_laa[3], - streamer_priv->streamer_laa[4], - streamer_priv->streamer_laa[5]); - } - return 0; -} - -static void streamer_arb_cmd(struct net_device *dev) -{ - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - __u8 header_len; - __u16 frame_len, buffer_len; - struct sk_buff *mac_frame; - __u8 frame_data[256]; - __u16 buff_off; - __u16 lan_status = 0, lan_status_diff; /* Initialize to stop compiler warning */ - __u8 fdx_prot_error; - __u16 next_ptr; - __u16 arb_word; - -#if STREAMER_NETWORK_MONITOR - struct trh_hdr *mac_hdr; -#endif - - writew(streamer_priv->arb, streamer_mmio + LAPA); - arb_word=ntohs(readw(streamer_mmio+LAPD)) >> 8; - - if (arb_word == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */ - writew(streamer_priv->arb + 6, streamer_mmio + LAPA); - streamer_priv->mac_rx_buffer = buff_off = ntohs(readw(streamer_mmio + LAPDINC)); - header_len=ntohs(readw(streamer_mmio+LAPDINC)) >> 8; /* 802.5 Token-Ring Header Length */ - frame_len = ntohs(readw(streamer_mmio + LAPDINC)); - -#if STREAMER_DEBUG - { - int i; - __u16 next; - __u8 status; - __u16 len; - - writew(ntohs(buff_off), streamer_mmio + LAPA); /*setup window to frame data */ - next = htons(readw(streamer_mmio + LAPDINC)); - status = - ntohs(readw(streamer_mmio + LAPDINC)) & 0xff; - len = ntohs(readw(streamer_mmio + LAPDINC)); - - /* print out 1st 14 bytes of frame data */ - for (i = 0; i < 7; i++) { - printk("Loc %d = %04x\n", i, - ntohs(readw - (streamer_mmio + LAPDINC))); - } - - printk("next %04x, fs %02x, len %04x\n", next, - status, len); - } -#endif - if (!(mac_frame = dev_alloc_skb(frame_len))) { - printk(KERN_WARNING "%s: Memory squeeze, dropping frame.\n", - dev->name); - goto drop_frame; - } - /* Walk the buffer chain, creating the frame */ - - do { - int i; - __u16 rx_word; - - writew(htons(buff_off), streamer_mmio + LAPA); /* setup window to frame data */ - next_ptr = ntohs(readw(streamer_mmio + LAPDINC)); - readw(streamer_mmio + LAPDINC); /* read thru status word */ - buffer_len = ntohs(readw(streamer_mmio + LAPDINC)); - - if (buffer_len > 256) - break; - - i = 0; - while (i < buffer_len) { - rx_word=ntohs(readw(streamer_mmio+LAPDINC)); - frame_data[i]=rx_word >> 8; - frame_data[i+1]=rx_word & 0xff; - i += 2; - } - - memcpy(skb_put(mac_frame, buffer_len), - frame_data, buffer_len); - } while (next_ptr && (buff_off = next_ptr)); - - mac_frame->protocol = tr_type_trans(mac_frame, dev); -#if STREAMER_NETWORK_MONITOR - printk(KERN_WARNING "%s: Received MAC Frame, details:\n", - dev->name); - mac_hdr = tr_hdr(mac_frame); - printk(KERN_WARNING - "%s: MAC Frame Dest. Addr: %pM\n", - dev->name, mac_hdr->daddr); - printk(KERN_WARNING - "%s: MAC Frame Srce. Addr: %pM\n", - dev->name, mac_hdr->saddr); -#endif - netif_rx(mac_frame); - - /* Now tell the card we have dealt with the received frame */ -drop_frame: - /* Set LISR Bit 1 */ - writel(LISR_ARB_FREE, streamer_priv->streamer_mmio + LISR_SUM); - - /* Is the ASB free ? */ - - if (!(readl(streamer_priv->streamer_mmio + SISR) & SISR_ASB_FREE)) - { - streamer_priv->asb_queued = 1; - writel(LISR_ASB_FREE_REQ, streamer_priv->streamer_mmio + LISR_SUM); - return; - /* Drop out and wait for the bottom half to be run */ - } - - - writew(streamer_priv->asb, streamer_mmio + LAPA); - writew(htons(ASB_RECEIVE_DATA << 8), streamer_mmio+LAPDINC); - writew(htons(STREAMER_CLEAR_RET_CODE << 8), streamer_mmio+LAPDINC); - writew(0, streamer_mmio + LAPDINC); - writew(htons(streamer_priv->mac_rx_buffer), streamer_mmio + LAPD); - - writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ, streamer_priv->streamer_mmio + LISR_SUM); - - streamer_priv->asb_queued = 2; - return; - - } else if (arb_word == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */ - writew(streamer_priv->arb + 6, streamer_mmio + LAPA); - lan_status = ntohs(readw(streamer_mmio + LAPDINC)); - fdx_prot_error = ntohs(readw(streamer_mmio+LAPD)) >> 8; - - /* Issue ARB Free */ - writew(LISR_ARB_FREE, streamer_priv->streamer_mmio + LISR_SUM); - - lan_status_diff = (streamer_priv->streamer_lan_status ^ lan_status) & - lan_status; - - if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR)) - { - if (lan_status_diff & LSC_LWF) - printk(KERN_WARNING "%s: Short circuit detected on the lobe\n", dev->name); - if (lan_status_diff & LSC_ARW) - printk(KERN_WARNING "%s: Auto removal error\n", dev->name); - if (lan_status_diff & LSC_FPE) - printk(KERN_WARNING "%s: FDX Protocol Error\n", dev->name); - if (lan_status_diff & LSC_RR) - printk(KERN_WARNING "%s: Force remove MAC frame received\n", dev->name); - - /* Adapter has been closed by the hardware */ - - /* reset tx/rx fifo's and busmaster logic */ - - /* @TBD. no llc reset on autostreamer writel(readl(streamer_mmio+BCTL)|(3<<13),streamer_mmio+BCTL); - udelay(1); - writel(readl(streamer_mmio+BCTL)&~(3<<13),streamer_mmio+BCTL); */ - - netif_stop_queue(dev); - netif_carrier_off(dev); - printk(KERN_WARNING "%s: Adapter must be manually reset.\n", dev->name); - } - /* If serious error */ - if (streamer_priv->streamer_message_level) { - if (lan_status_diff & LSC_SIG_LOSS) - printk(KERN_WARNING "%s: No receive signal detected\n", dev->name); - if (lan_status_diff & LSC_HARD_ERR) - printk(KERN_INFO "%s: Beaconing\n", dev->name); - if (lan_status_diff & LSC_SOFT_ERR) - printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n", dev->name); - if (lan_status_diff & LSC_TRAN_BCN) - printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n", dev->name); - if (lan_status_diff & LSC_SS) - printk(KERN_INFO "%s: Single Station on the ring\n", dev->name); - if (lan_status_diff & LSC_RING_REC) - printk(KERN_INFO "%s: Ring recovery ongoing\n", dev->name); - if (lan_status_diff & LSC_FDX_MODE) - printk(KERN_INFO "%s: Operating in FDX mode\n", dev->name); - } - - if (lan_status_diff & LSC_CO) { - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Counter Overflow\n", dev->name); - - /* Issue READ.LOG command */ - - writew(streamer_priv->srb, streamer_mmio + LAPA); - writew(htons(SRB_READ_LOG << 8),streamer_mmio+LAPDINC); - writew(htons(STREAMER_CLEAR_RET_CODE << 8), streamer_mmio+LAPDINC); - writew(0, streamer_mmio + LAPDINC); - streamer_priv->srb_queued = 2; /* Can't sleep, use srb_bh */ - - writew(LISR_SRB_CMD, streamer_mmio + LISR_SUM); - } - - if (lan_status_diff & LSC_SR_CO) { - if (streamer_priv->streamer_message_level) - printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name); - - /* Issue a READ.SR.COUNTERS */ - writew(streamer_priv->srb, streamer_mmio + LAPA); - writew(htons(SRB_READ_SR_COUNTERS << 8), - streamer_mmio+LAPDINC); - writew(htons(STREAMER_CLEAR_RET_CODE << 8), - streamer_mmio+LAPDINC); - streamer_priv->srb_queued = 2; /* Can't sleep, use srb_bh */ - writew(LISR_SRB_CMD, streamer_mmio + LISR_SUM); - - } - streamer_priv->streamer_lan_status = lan_status; - } /* Lan.change.status */ - else - printk(KERN_WARNING "%s: Unknown arb command\n", dev->name); -} - -static void streamer_asb_bh(struct net_device *dev) -{ - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - - if (streamer_priv->asb_queued == 1) - { - /* Dropped through the first time */ - - writew(streamer_priv->asb, streamer_mmio + LAPA); - writew(htons(ASB_RECEIVE_DATA << 8),streamer_mmio+LAPDINC); - writew(htons(STREAMER_CLEAR_RET_CODE << 8), streamer_mmio+LAPDINC); - writew(0, streamer_mmio + LAPDINC); - writew(htons(streamer_priv->mac_rx_buffer), streamer_mmio + LAPD); - - writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ, streamer_priv->streamer_mmio + LISR_SUM); - streamer_priv->asb_queued = 2; - - return; - } - - if (streamer_priv->asb_queued == 2) { - __u8 rc; - writew(streamer_priv->asb + 2, streamer_mmio + LAPA); - rc=ntohs(readw(streamer_mmio+LAPD)) >> 8; - switch (rc) { - case 0x01: - printk(KERN_WARNING "%s: Unrecognized command code\n", dev->name); - break; - case 0x26: - printk(KERN_WARNING "%s: Unrecognized buffer address\n", dev->name); - break; - case 0xFF: - /* Valid response, everything should be ok again */ - break; - default: - printk(KERN_WARNING "%s: Invalid return code in asb\n", dev->name); - break; - } - } - streamer_priv->asb_queued = 0; -} - -static int streamer_change_mtu(struct net_device *dev, int mtu) -{ - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u16 max_mtu; - - if (streamer_priv->streamer_ring_speed == 4) - max_mtu = 4500; - else - max_mtu = 18000; - - if (mtu > max_mtu) - return -EINVAL; - if (mtu < 100) - return -EINVAL; - - dev->mtu = mtu; - streamer_priv->pkt_buf_sz = mtu + TR_HLEN; - - return 0; -} - -#if STREAMER_NETWORK_MONITOR -#ifdef CONFIG_PROC_FS -static int streamer_proc_info(char *buffer, char **start, off_t offset, - int length, int *eof, void *data) -{ - struct streamer_private *sdev=NULL; - struct pci_dev *pci_device = NULL; - int len = 0; - off_t begin = 0; - off_t pos = 0; - int size; - - struct net_device *dev; - - size = sprintf(buffer, "IBM LanStreamer/MPC Chipset Token Ring Adapters\n"); - - pos += size; - len += size; - - for(sdev=dev_streamer; sdev; sdev=sdev->next) { - pci_device=sdev->pci_dev; - dev=pci_get_drvdata(pci_device); - - size = sprintf_info(buffer + len, dev); - len += size; - pos = begin + len; - - if (pos < offset) { - len = 0; - begin = pos; - } - if (pos > offset + length) - break; - } /* for */ - - *start = buffer + (offset - begin); /* Start of wanted data */ - len -= (offset - begin); /* Start slop */ - if (len > length) - len = length; /* Ending slop */ - return len; -} - -static int sprintf_info(char *buffer, struct net_device *dev) -{ - struct streamer_private *streamer_priv = - netdev_priv(dev); - __u8 __iomem *streamer_mmio = streamer_priv->streamer_mmio; - struct streamer_adapter_addr_table sat; - struct streamer_parameters_table spt; - int size = 0; - int i; - - writew(streamer_priv->streamer_addr_table_addr, streamer_mmio + LAPA); - for (i = 0; i < 14; i += 2) { - __u16 io_word; - __u8 *datap = (__u8 *) & sat; - io_word=ntohs(readw(streamer_mmio+LAPDINC)); - datap[size]=io_word >> 8; - datap[size+1]=io_word & 0xff; - } - writew(streamer_priv->streamer_parms_addr, streamer_mmio + LAPA); - for (i = 0; i < 68; i += 2) { - __u16 io_word; - __u8 *datap = (__u8 *) & spt; - io_word=ntohs(readw(streamer_mmio+LAPDINC)); - datap[size]=io_word >> 8; - datap[size+1]=io_word & 0xff; - } - - size = sprintf(buffer, "\n%6s: Adapter Address : Node Address : Functional Addr\n", dev->name); - - size += sprintf(buffer + size, - "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n", - dev->name, dev->dev_addr, sat.node_addr, - sat.func_addr[0], sat.func_addr[1], - sat.func_addr[2], sat.func_addr[3]); - - size += sprintf(buffer + size, "\n%6s: Token Ring Parameters Table:\n", dev->name); - - size += sprintf(buffer + size, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n", dev->name); - - size += sprintf(buffer + size, - "%6s: %02x:%02x:%02x:%02x : %pM : %pM : %04x : %04x : %04x :\n", - dev->name, spt.phys_addr[0], spt.phys_addr[1], - spt.phys_addr[2], spt.phys_addr[3], - spt.up_node_addr, spt.poll_addr, - ntohs(spt.acc_priority), ntohs(spt.auth_source_class), - ntohs(spt.att_code)); - - size += sprintf(buffer + size, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n", dev->name); - - size += sprintf(buffer + size, - "%6s: %pM : %04x : %04x : %04x : %04x : %04x : %04x : \n", - dev->name, spt.source_addr, - ntohs(spt.beacon_type), ntohs(spt.major_vector), - ntohs(spt.lan_status), ntohs(spt.local_ring), - ntohs(spt.mon_error), ntohs(spt.frame_correl)); - - size += sprintf(buffer + size, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n", - dev->name); - - size += sprintf(buffer + size, - "%6s: : %02x : %02x : %pM : %02x:%02x:%02x:%02x : \n", - dev->name, ntohs(spt.beacon_transmit), - ntohs(spt.beacon_receive), - spt.beacon_naun, - spt.beacon_phys[0], spt.beacon_phys[1], - spt.beacon_phys[2], spt.beacon_phys[3]); - return size; -} -#endif -#endif - -static struct pci_driver streamer_pci_driver = { - .name = "lanstreamer", - .id_table = streamer_pci_tbl, - .probe = streamer_init_one, - .remove = __devexit_p(streamer_remove_one), -}; - -module_pci_driver(streamer_pci_driver); - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/tokenring/lanstreamer.h b/drivers/net/tokenring/lanstreamer.h deleted file mode 100644 index 3c58d6a3fbc9..000000000000 --- a/drivers/net/tokenring/lanstreamer.h +++ /dev/null @@ -1,343 +0,0 @@ -/* - * lanstreamer.h -- driver for the IBM Auto LANStreamer PCI Adapter - * - * Written By: Mike Sullivan, IBM Corporation - * - * Copyright (C) 1999 IBM Corporation - * - * Linux driver for IBM PCI tokenring cards based on the LanStreamer MPC - * chipset. - * - * This driver is based on the olympic driver for IBM PCI TokenRing cards (Pit/Pit-Phy/Olympic - * chipsets) written by: - * 1999 Peter De Schrijver All Rights Reserved - * 1999 Mike Phillips (phillim@amtrak.com) - * - * Base Driver Skeleton: - * Written 1993-94 by Donald Becker. - * - * Copyright 1993 United States Government as represented by the - * Director, National Security Agency. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * NO WARRANTY - * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR - * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT - * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is - * solely responsible for determining the appropriateness of using and - * distributing the Program and assumes all risks associated with its - * exercise of rights under this Agreement, including but not limited to - * the risks and costs of program errors, damage to or loss of data, - * programs or equipment, and unavailability or interruption of operations. - * - * DISCLAIMER OF LIABILITY - * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED - * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * 12/10/99 - Alpha Release 0.1.0 - * First release to the public - * 08/15/01 - Added ioctl() definitions and others - Kent Yoder <yoder1@us.ibm.com> - * - */ - -/* MAX_INTR - the maximum number of times we can loop - * inside the interrupt function before returning - * control to the OS (maximum value is 256) - */ -#define MAX_INTR 5 - -#define CLS 0x0C -#define MLR 0x86 -#define LTR 0x0D - -#define BCTL 0x60 -#define BCTL_SOFTRESET (1<<15) -#define BCTL_RX_FIFO_8 (1<<1) -#define BCTL_TX_FIFO_8 (1<<3) - -#define GPR 0x4a -#define GPR_AUTOSENSE (1<<2) -#define GPR_16MBPS (1<<3) - -#define LISR 0x10 -#define LISR_SUM 0x12 -#define LISR_RUM 0x14 - -#define LISR_LIE (1<<15) -#define LISR_SLIM (1<<13) -#define LISR_SLI (1<<12) -#define LISR_BPEI (1<<9) -#define LISR_BPE (1<<8) -#define LISR_SRB_CMD (1<<5) -#define LISR_ASB_REPLY (1<<4) -#define LISR_ASB_FREE_REQ (1<<2) -#define LISR_ARB_FREE (1<<1) -#define LISR_TRB_FRAME (1<<0) - -#define SISR 0x16 -#define SISR_SUM 0x18 -#define SISR_RUM 0x1A -#define SISR_MASK 0x54 -#define SISR_MASK_SUM 0x56 -#define SISR_MASK_RUM 0x58 - -#define SISR_MI (1<<15) -#define SISR_SERR_ERR (1<<14) -#define SISR_TIMER (1<<11) -#define SISR_LAP_PAR_ERR (1<<10) -#define SISR_LAP_ACC_ERR (1<<9) -#define SISR_PAR_ERR (1<<8) -#define SISR_ADAPTER_CHECK (1<<6) -#define SISR_SRB_REPLY (1<<5) -#define SISR_ASB_FREE (1<<4) -#define SISR_ARB_CMD (1<<3) -#define SISR_TRB_REPLY (1<<2) - -#define MISR_RUM 0x5A -#define MISR_MASK 0x5C -#define MISR_MASK_RUM 0x5E - -#define MISR_TX2_IDLE (1<<15) -#define MISR_TX2_NO_STATUS (1<<14) -#define MISR_TX2_HALT (1<<13) -#define MISR_TX2_EOF (1<<12) -#define MISR_TX1_IDLE (1<<11) -#define MISR_TX1_NO_STATUS (1<<10) -#define MISR_TX1_HALT (1<<9) -#define MISR_TX1_EOF (1<<8) -#define MISR_RX_NOBUF (1<<5) -#define MISR_RX_EOB (1<<4) -#define MISR_RX_NO_STATUS (1<<2) -#define MISR_RX_HALT (1<<1) -#define MISR_RX_EOF (1<<0) - -#define LAPA 0x62 -#define LAPE 0x64 -#define LAPD 0x66 -#define LAPDINC 0x68 -#define LAPWWO 0x6A -#define LAPWWC 0x6C -#define LAPCTL 0x6E - -#define TIMER 0x4E4 - -#define BMCTL_SUM 0x50 -#define BMCTL_RUM 0x52 -#define BMCTL_TX1_DIS (1<<14) -#define BMCTL_TX2_DIS (1<<10) -#define BMCTL_RX_DIS (1<<6) -#define BMCTL_RX_ENABLED (1<<5) - -#define RXLBDA 0x90 -#define RXBDA 0x94 -#define RXSTAT 0x98 -#define RXDBA 0x9C - -#define TX1LFDA 0xA0 -#define TX1FDA 0xA4 -#define TX1STAT 0xA8 -#define TX1DBA 0xAC -#define TX2LFDA 0xB0 -#define TX2FDA 0xB4 -#define TX2STAT 0xB8 -#define TX2DBA 0xBC - -#define STREAMER_IO_SPACE 256 - -#define SRB_COMMAND_SIZE 50 - -#define STREAMER_MAX_ADAPTERS 8 /* 0x08 __MODULE_STRING can't hand 0xnn */ - -/* Defines for LAN STATUS CHANGE reports */ -#define LSC_SIG_LOSS 0x8000 -#define LSC_HARD_ERR 0x4000 -#define LSC_SOFT_ERR 0x2000 -#define LSC_TRAN_BCN 0x1000 -#define LSC_LWF 0x0800 -#define LSC_ARW 0x0400 -#define LSC_FPE 0x0200 -#define LSC_RR 0x0100 -#define LSC_CO 0x0080 -#define LSC_SS 0x0040 -#define LSC_RING_REC 0x0020 -#define LSC_SR_CO 0x0010 -#define LSC_FDX_MODE 0x0004 - -/* Defines for OPEN ADAPTER command */ - -#define OPEN_ADAPTER_EXT_WRAP (1<<15) -#define OPEN_ADAPTER_DIS_HARDEE (1<<14) -#define OPEN_ADAPTER_DIS_SOFTERR (1<<13) -#define OPEN_ADAPTER_PASS_ADC_MAC (1<<12) -#define OPEN_ADAPTER_PASS_ATT_MAC (1<<11) -#define OPEN_ADAPTER_ENABLE_EC (1<<10) -#define OPEN_ADAPTER_CONTENDER (1<<8) -#define OPEN_ADAPTER_PASS_BEACON (1<<7) -#define OPEN_ADAPTER_ENABLE_FDX (1<<6) -#define OPEN_ADAPTER_ENABLE_RPL (1<<5) -#define OPEN_ADAPTER_INHIBIT_ETR (1<<4) -#define OPEN_ADAPTER_INTERNAL_WRAP (1<<3) - - -/* Defines for SRB Commands */ -#define SRB_CLOSE_ADAPTER 0x04 -#define SRB_CONFIGURE_BRIDGE 0x0c -#define SRB_CONFIGURE_HP_CHANNEL 0x13 -#define SRB_MODIFY_BRIDGE_PARMS 0x15 -#define SRB_MODIFY_OPEN_OPTIONS 0x01 -#define SRB_MODIFY_RECEIVE_OPTIONS 0x17 -#define SRB_NO_OPERATION 0x00 -#define SRB_OPEN_ADAPTER 0x03 -#define SRB_READ_LOG 0x08 -#define SRB_READ_SR_COUNTERS 0x16 -#define SRB_RESET_GROUP_ADDRESS 0x02 -#define SRB_RESET_TARGET_SEGMETN 0x14 -#define SRB_SAVE_CONFIGURATION 0x1b -#define SRB_SET_BRIDGE_PARMS 0x09 -#define SRB_SET_FUNC_ADDRESS 0x07 -#define SRB_SET_GROUP_ADDRESS 0x06 -#define SRB_SET_TARGET_SEGMENT 0x05 - -/* Clear return code */ -#define STREAMER_CLEAR_RET_CODE 0xfe - -/* ARB Commands */ -#define ARB_RECEIVE_DATA 0x81 -#define ARB_LAN_CHANGE_STATUS 0x84 - -/* ASB Response commands */ -#define ASB_RECEIVE_DATA 0x81 - - -/* Streamer defaults for buffers */ - -#define STREAMER_RX_RING_SIZE 16 /* should be a power of 2 */ -/* Setting the number of TX descriptors to 1 is a workaround for an - * undocumented hardware problem with the lanstreamer board. Setting - * this to something higher may slightly increase the throughput you - * can get from the card, but at the risk of locking up the box. - - * <yoder1@us.ibm.com> - */ -#define STREAMER_TX_RING_SIZE 1 /* should be a power of 2 */ - -#define PKT_BUF_SZ 4096 /* Default packet size */ - -/* Streamer data structures */ - -struct streamer_tx_desc { - __u32 forward; - __u32 status; - __u32 bufcnt_framelen; - __u32 buffer; - __u32 buflen; - __u32 rsvd1; - __u32 rsvd2; - __u32 rsvd3; -}; - -struct streamer_rx_desc { - __u32 forward; - __u32 status; - __u32 buffer; - __u32 framelen_buflen; -}; - -struct mac_receive_buffer { - __u16 next; - __u8 padding; - __u8 frame_status; - __u16 buffer_length; - __u8 frame_data; -}; - -struct streamer_private { - - __u16 srb; - __u16 trb; - __u16 arb; - __u16 asb; - - struct streamer_private *next; - struct pci_dev *pci_dev; - __u8 __iomem *streamer_mmio; - char *streamer_card_name; - - spinlock_t streamer_lock; - - volatile int srb_queued; /* True if an SRB is still posted */ - wait_queue_head_t srb_wait; - - volatile int asb_queued; /* True if an ASB is posted */ - - volatile int trb_queued; /* True if a TRB is posted */ - wait_queue_head_t trb_wait; - - struct streamer_rx_desc *streamer_rx_ring; - struct streamer_tx_desc *streamer_tx_ring; - struct sk_buff *tx_ring_skb[STREAMER_TX_RING_SIZE], - *rx_ring_skb[STREAMER_RX_RING_SIZE]; - int tx_ring_free, tx_ring_last_status, rx_ring_last_received, - free_tx_ring_entries; - - __u16 streamer_lan_status; - __u8 streamer_ring_speed; - __u16 pkt_buf_sz; - __u8 streamer_receive_options, streamer_copy_all_options, - streamer_message_level; - __u16 streamer_addr_table_addr, streamer_parms_addr; - __u16 mac_rx_buffer; - __u8 streamer_laa[6]; -}; - -struct streamer_adapter_addr_table { - - __u8 node_addr[6]; - __u8 reserved[4]; - __u8 func_addr[4]; -}; - -struct streamer_parameters_table { - - __u8 phys_addr[4]; - __u8 up_node_addr[6]; - __u8 up_phys_addr[4]; - __u8 poll_addr[6]; - __u16 reserved; - __u16 acc_priority; - __u16 auth_source_class; - __u16 att_code; - __u8 source_addr[6]; - __u16 beacon_type; - __u16 major_vector; - __u16 lan_status; - __u16 soft_error_time; - __u16 reserved1; - __u16 local_ring; - __u16 mon_error; - __u16 beacon_transmit; - __u16 beacon_receive; - __u16 frame_correl; - __u8 beacon_naun[6]; - __u32 reserved2; - __u8 beacon_phys[4]; -}; diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c deleted file mode 100644 index 28adcdf3b14c..000000000000 --- a/drivers/net/tokenring/madgemc.c +++ /dev/null @@ -1,761 +0,0 @@ -/* - * madgemc.c: Driver for the Madge Smart 16/4 MC16 MCA token ring card. - * - * Written 2000 by Adam Fritzler - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This driver module supports the following cards: - * - Madge Smart 16/4 Ringnode MC16 - * - Madge Smart 16/4 Ringnode MC32 (??) - * - * Maintainer(s): - * AF Adam Fritzler - * - * Modification History: - * 16-Jan-00 AF Created - * - */ -static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n"; - -#include <linux/module.h> -#include <linux/mca.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#include "tms380tr.h" -#include "madgemc.h" /* Madge-specific constants */ - -#define MADGEMC_IO_EXTENT 32 -#define MADGEMC_SIF_OFFSET 0x08 - -struct card_info { - /* - * These are read from the BIA ROM. - */ - unsigned int manid; - unsigned int cardtype; - unsigned int cardrev; - unsigned int ramsize; - - /* - * These are read from the MCA POS registers. - */ - unsigned int burstmode:2; - unsigned int fairness:1; /* 0 = Fair, 1 = Unfair */ - unsigned int arblevel:4; - unsigned int ringspeed:2; /* 0 = 4mb, 1 = 16, 2 = Auto/none */ - unsigned int cabletype:1; /* 0 = RJ45, 1 = DB9 */ -}; - -static int madgemc_open(struct net_device *dev); -static int madgemc_close(struct net_device *dev); -static int madgemc_chipset_init(struct net_device *dev); -static void madgemc_read_rom(struct net_device *dev, struct card_info *card); -static unsigned short madgemc_setnselout_pins(struct net_device *dev); -static void madgemc_setcabletype(struct net_device *dev, int type); - -static int madgemc_mcaproc(char *buf, int slot, void *d); - -static void madgemc_setregpage(struct net_device *dev, int page); -static void madgemc_setsifsel(struct net_device *dev, int val); -static void madgemc_setint(struct net_device *dev, int val); - -static irqreturn_t madgemc_interrupt(int irq, void *dev_id); - -/* - * These work around paging, however they don't guarantee you're on the - * right page. - */ -#define SIFREADB(reg) (inb(dev->base_addr + ((reg<0x8)?reg:reg-0x8))) -#define SIFWRITEB(val, reg) (outb(val, dev->base_addr + ((reg<0x8)?reg:reg-0x8))) -#define SIFREADW(reg) (inw(dev->base_addr + ((reg<0x8)?reg:reg-0x8))) -#define SIFWRITEW(val, reg) (outw(val, dev->base_addr + ((reg<0x8)?reg:reg-0x8))) - -/* - * Read a byte-length value from the register. - */ -static unsigned short madgemc_sifreadb(struct net_device *dev, unsigned short reg) -{ - unsigned short ret; - if (reg<0x8) - ret = SIFREADB(reg); - else { - madgemc_setregpage(dev, 1); - ret = SIFREADB(reg); - madgemc_setregpage(dev, 0); - } - return ret; -} - -/* - * Write a byte-length value to a register. - */ -static void madgemc_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg) -{ - if (reg<0x8) - SIFWRITEB(val, reg); - else { - madgemc_setregpage(dev, 1); - SIFWRITEB(val, reg); - madgemc_setregpage(dev, 0); - } -} - -/* - * Read a word-length value from a register - */ -static unsigned short madgemc_sifreadw(struct net_device *dev, unsigned short reg) -{ - unsigned short ret; - if (reg<0x8) - ret = SIFREADW(reg); - else { - madgemc_setregpage(dev, 1); - ret = SIFREADW(reg); - madgemc_setregpage(dev, 0); - } - return ret; -} - -/* - * Write a word-length value to a register. - */ -static void madgemc_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg) -{ - if (reg<0x8) - SIFWRITEW(val, reg); - else { - madgemc_setregpage(dev, 1); - SIFWRITEW(val, reg); - madgemc_setregpage(dev, 0); - } -} - -static struct net_device_ops madgemc_netdev_ops __read_mostly; - -static int __devinit madgemc_probe(struct device *device) -{ - static int versionprinted; - struct net_device *dev; - struct net_local *tp; - struct card_info *card; - struct mca_device *mdev = to_mca_device(device); - int ret = 0; - - if (versionprinted++ == 0) - printk("%s", version); - - if(mca_device_claimed(mdev)) - return -EBUSY; - mca_device_set_claim(mdev, 1); - - dev = alloc_trdev(sizeof(struct net_local)); - if (!dev) { - printk("madgemc: unable to allocate dev space\n"); - mca_device_set_claim(mdev, 0); - ret = -ENOMEM; - goto getout; - } - - dev->netdev_ops = &madgemc_netdev_ops; - - card = kmalloc(sizeof(struct card_info), GFP_KERNEL); - if (card==NULL) { - ret = -ENOMEM; - goto getout1; - } - - /* - * Parse configuration information. This all comes - * directly from the publicly available @002d.ADF. - * Get it from Madge or your local ADF library. - */ - - /* - * Base address - */ - dev->base_addr = 0x0a20 + - ((mdev->pos[2] & MC16_POS2_ADDR2)?0x0400:0) + - ((mdev->pos[0] & MC16_POS0_ADDR1)?0x1000:0) + - ((mdev->pos[3] & MC16_POS3_ADDR3)?0x2000:0); - - /* - * Interrupt line - */ - switch(mdev->pos[0] >> 6) { /* upper two bits */ - case 0x1: dev->irq = 3; break; - case 0x2: dev->irq = 9; break; /* IRQ 2 = IRQ 9 */ - case 0x3: dev->irq = 10; break; - default: dev->irq = 0; break; - } - - if (dev->irq == 0) { - printk("%s: invalid IRQ\n", dev->name); - ret = -EBUSY; - goto getout2; - } - - if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT, - "madgemc")) { - printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", mdev->slot, dev->base_addr); - dev->base_addr += MADGEMC_SIF_OFFSET; - ret = -EBUSY; - goto getout2; - } - dev->base_addr += MADGEMC_SIF_OFFSET; - - /* - * Arbitration Level - */ - card->arblevel = ((mdev->pos[0] >> 1) & 0x7) + 8; - - /* - * Burst mode and Fairness - */ - card->burstmode = ((mdev->pos[2] >> 6) & 0x3); - card->fairness = ((mdev->pos[2] >> 4) & 0x1); - - /* - * Ring Speed - */ - if ((mdev->pos[1] >> 2)&0x1) - card->ringspeed = 2; /* not selected */ - else if ((mdev->pos[2] >> 5) & 0x1) - card->ringspeed = 1; /* 16Mb */ - else - card->ringspeed = 0; /* 4Mb */ - - /* - * Cable type - */ - if ((mdev->pos[1] >> 6)&0x1) - card->cabletype = 1; /* STP/DB9 */ - else - card->cabletype = 0; /* UTP/RJ-45 */ - - - /* - * ROM Info. This requires us to actually twiddle - * bits on the card, so we must ensure above that - * the base address is free of conflict (request_region above). - */ - madgemc_read_rom(dev, card); - - if (card->manid != 0x4d) { /* something went wrong */ - printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid); - goto getout3; - } - - if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) { - printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype); - ret = -EIO; - goto getout3; - } - - /* All cards except Rev 0 and 1 MC16's have 256kb of RAM */ - if ((card->cardtype == 0x08) && (card->cardrev <= 0x01)) - card->ramsize = 128; - else - card->ramsize = 256; - - printk("%s: %s Rev %d at 0x%04lx IRQ %d\n", - dev->name, - (card->cardtype == 0x08)?MADGEMC16_CARDNAME: - MADGEMC32_CARDNAME, card->cardrev, - dev->base_addr, dev->irq); - - if (card->cardtype == 0x0d) - printk("%s: Warning: MC32 support is experimental and highly untested\n", dev->name); - - if (card->ringspeed==2) { /* Unknown */ - printk("%s: Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name); - card->ringspeed = 1; /* default to 16mb */ - } - - printk("%s: RAM Size: %dKB\n", dev->name, card->ramsize); - - printk("%s: Ring Speed: %dMb/sec on %s\n", dev->name, - (card->ringspeed)?16:4, - card->cabletype?"STP/DB9":"UTP/RJ-45"); - printk("%s: Arbitration Level: %d\n", dev->name, - card->arblevel); - - printk("%s: Burst Mode: ", dev->name); - switch(card->burstmode) { - case 0: printk("Cycle steal"); break; - case 1: printk("Limited burst"); break; - case 2: printk("Delayed release"); break; - case 3: printk("Immediate release"); break; - } - printk(" (%s)\n", (card->fairness)?"Unfair":"Fair"); - - - /* - * Enable SIF before we assign the interrupt handler, - * just in case we get spurious interrupts that need - * handling. - */ - outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */ - madgemc_setsifsel(dev, 1); - if (request_irq(dev->irq, madgemc_interrupt, IRQF_SHARED, - "madgemc", dev)) { - ret = -EBUSY; - goto getout3; - } - - madgemc_chipset_init(dev); /* enables interrupts! */ - madgemc_setcabletype(dev, card->cabletype); - - /* Setup MCA structures */ - mca_device_set_name(mdev, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME); - mca_set_adapter_procfn(mdev->slot, madgemc_mcaproc, dev); - - printk("%s: Ring Station Address: %pM\n", - dev->name, dev->dev_addr); - - if (tmsdev_init(dev, device)) { - printk("%s: unable to get memory for dev->priv.\n", - dev->name); - ret = -ENOMEM; - goto getout4; - } - tp = netdev_priv(dev); - - /* - * The MC16 is physically a 32bit card. However, Madge - * insists on calling it 16bit, so I'll assume here that - * they know what they're talking about. Cut off DMA - * at 16mb. - */ - tp->setnselout = madgemc_setnselout_pins; - tp->sifwriteb = madgemc_sifwriteb; - tp->sifreadb = madgemc_sifreadb; - tp->sifwritew = madgemc_sifwritew; - tp->sifreadw = madgemc_sifreadw; - tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4; - - memcpy(tp->ProductID, "Madge MCA 16/4 ", PROD_ID_SIZE + 1); - - tp->tmspriv = card; - dev_set_drvdata(device, dev); - - if (register_netdev(dev) == 0) - return 0; - - dev_set_drvdata(device, NULL); - ret = -ENOMEM; -getout4: - free_irq(dev->irq, dev); -getout3: - release_region(dev->base_addr-MADGEMC_SIF_OFFSET, - MADGEMC_IO_EXTENT); -getout2: - kfree(card); -getout1: - free_netdev(dev); -getout: - mca_device_set_claim(mdev, 0); - return ret; -} - -/* - * Handle interrupts generated by the card - * - * The MicroChannel Madge cards need slightly more handling - * after an interrupt than other TMS380 cards do. - * - * First we must make sure it was this card that generated the - * interrupt (since interrupt sharing is allowed). Then, - * because we're using level-triggered interrupts (as is - * standard on MCA), we must toggle the interrupt line - * on the card in order to claim and acknowledge the interrupt. - * Once that is done, the interrupt should be handlable in - * the normal tms380tr_interrupt() routine. - * - * There's two ways we can check to see if the interrupt is ours, - * both with their own disadvantages... - * - * 1) Read in the SIFSTS register from the TMS controller. This - * is guaranteed to be accurate, however, there's a fairly - * large performance penalty for doing so: the Madge chips - * must request the register from the Eagle, the Eagle must - * read them from its internal bus, and then take the route - * back out again, for a 16bit read. - * - * 2) Use the MC_CONTROL_REG0_SINTR bit from the Madge ASICs. - * The major disadvantage here is that the accuracy of the - * bit is in question. However, it cuts out the extra read - * cycles it takes to read the Eagle's SIF, as its only an - * 8bit read, and theoretically the Madge bit is directly - * connected to the interrupt latch coming out of the Eagle - * hardware (that statement is not verified). - * - * I can't determine which of these methods has the best win. For now, - * we make a compromise. Use the Madge way for the first interrupt, - * which should be the fast-path, and then once we hit the first - * interrupt, keep on trying using the SIF method until we've - * exhausted all contiguous interrupts. - * - */ -static irqreturn_t madgemc_interrupt(int irq, void *dev_id) -{ - int pending,reg1; - struct net_device *dev; - - if (!dev_id) { - printk("madgemc_interrupt: was not passed a dev_id!\n"); - return IRQ_NONE; - } - - dev = dev_id; - - /* Make sure its really us. -- the Madge way */ - pending = inb(dev->base_addr + MC_CONTROL_REG0); - if (!(pending & MC_CONTROL_REG0_SINTR)) - return IRQ_NONE; /* not our interrupt */ - - /* - * Since we're level-triggered, we may miss the rising edge - * of the next interrupt while we're off handling this one, - * so keep checking until the SIF verifies that it has nothing - * left for us to do. - */ - pending = STS_SYSTEM_IRQ; - do { - if (pending & STS_SYSTEM_IRQ) { - - /* Toggle the interrupt to reset the latch on card */ - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); - outb(reg1 ^ MC_CONTROL_REG1_SINTEN, - dev->base_addr + MC_CONTROL_REG1); - outb(reg1, dev->base_addr + MC_CONTROL_REG1); - - /* Continue handling as normal */ - tms380tr_interrupt(irq, dev_id); - - pending = SIFREADW(SIFSTS); /* restart - the SIF way */ - - } else - return IRQ_HANDLED; - } while (1); - - return IRQ_HANDLED; /* not reachable */ -} - -/* - * Set the card to the preferred ring speed. - * - * Unlike newer cards, the MC16/32 have their speed selection - * circuit connected to the Madge ASICs and not to the TMS380 - * NSELOUT pins. Set the ASIC bits correctly here, and return - * zero to leave the TMS NSELOUT bits unaffected. - * - */ -static unsigned short madgemc_setnselout_pins(struct net_device *dev) -{ - unsigned char reg1; - struct net_local *tp = netdev_priv(dev); - - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); - - if(tp->DataRate == SPEED_16) - reg1 |= MC_CONTROL_REG1_SPEED_SEL; /* add for 16mb */ - else if (reg1 & MC_CONTROL_REG1_SPEED_SEL) - reg1 ^= MC_CONTROL_REG1_SPEED_SEL; /* remove for 4mb */ - outb(reg1, dev->base_addr + MC_CONTROL_REG1); - - return 0; /* no change */ -} - -/* - * Set the register page. This equates to the SRSX line - * on the TMS380Cx6. - * - * Register selection is normally done via three contiguous - * bits. However, some boards (such as the MC16/32) use only - * two bits, plus a separate bit in the glue chip. This - * sets the SRSX bit (the top bit). See page 4-17 in the - * Yellow Book for which registers are affected. - * - */ -static void madgemc_setregpage(struct net_device *dev, int page) -{ - static int reg1; - - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); - if ((page == 0) && (reg1 & MC_CONTROL_REG1_SRSX)) { - outb(reg1 ^ MC_CONTROL_REG1_SRSX, - dev->base_addr + MC_CONTROL_REG1); - } - else if (page == 1) { - outb(reg1 | MC_CONTROL_REG1_SRSX, - dev->base_addr + MC_CONTROL_REG1); - } - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); -} - -/* - * The SIF registers are not mapped into register space by default - * Set this to 1 to map them, 0 to map the BIA ROM. - * - */ -static void madgemc_setsifsel(struct net_device *dev, int val) -{ - unsigned int reg0; - - reg0 = inb(dev->base_addr + MC_CONTROL_REG0); - if ((val == 0) && (reg0 & MC_CONTROL_REG0_SIFSEL)) { - outb(reg0 ^ MC_CONTROL_REG0_SIFSEL, - dev->base_addr + MC_CONTROL_REG0); - } else if (val == 1) { - outb(reg0 | MC_CONTROL_REG0_SIFSEL, - dev->base_addr + MC_CONTROL_REG0); - } - reg0 = inb(dev->base_addr + MC_CONTROL_REG0); -} - -/* - * Enable SIF interrupts - * - * This does not enable interrupts in the SIF, but rather - * enables SIF interrupts to be passed onto the host. - * - */ -static void madgemc_setint(struct net_device *dev, int val) -{ - unsigned int reg1; - - reg1 = inb(dev->base_addr + MC_CONTROL_REG1); - if ((val == 0) && (reg1 & MC_CONTROL_REG1_SINTEN)) { - outb(reg1 ^ MC_CONTROL_REG1_SINTEN, - dev->base_addr + MC_CONTROL_REG1); - } else if (val == 1) { - outb(reg1 | MC_CONTROL_REG1_SINTEN, - dev->base_addr + MC_CONTROL_REG1); - } -} - -/* - * Cable type is set via control register 7. Bit zero high - * for UTP, low for STP. - */ -static void madgemc_setcabletype(struct net_device *dev, int type) -{ - outb((type==0)?MC_CONTROL_REG7_CABLEUTP:MC_CONTROL_REG7_CABLESTP, - dev->base_addr + MC_CONTROL_REG7); -} - -/* - * Enable the functions of the Madge chipset needed for - * full working order. - */ -static int madgemc_chipset_init(struct net_device *dev) -{ - outb(0, dev->base_addr + MC_CONTROL_REG1); /* pull SRESET low */ - tms380tr_wait(100); /* wait for card to reset */ - - /* bring back into normal operating mode */ - outb(MC_CONTROL_REG1_NSRESET, dev->base_addr + MC_CONTROL_REG1); - - /* map SIF registers */ - madgemc_setsifsel(dev, 1); - - /* enable SIF interrupts */ - madgemc_setint(dev, 1); - - return 0; -} - -/* - * Disable the board, and put back into power-up state. - */ -static void madgemc_chipset_close(struct net_device *dev) -{ - /* disable interrupts */ - madgemc_setint(dev, 0); - /* unmap SIF registers */ - madgemc_setsifsel(dev, 0); -} - -/* - * Read the card type (MC16 or MC32) from the card. - * - * The configuration registers are stored in two separate - * pages. Pages are flipped by clearing bit 3 of CONTROL_REG0 (PAGE) - * for page zero, or setting bit 3 for page one. - * - * Page zero contains the following data: - * Byte 0: Manufacturer ID (0x4D -- ASCII "M") - * Byte 1: Card type: - * 0x08 for MC16 - * 0x0D for MC32 - * Byte 2: Card revision - * Byte 3: Mirror of POS config register 0 - * Byte 4: Mirror of POS 1 - * Byte 5: Mirror of POS 2 - * - * Page one contains the following data: - * Byte 0: Unused - * Byte 1-6: BIA, MSB to LSB. - * - * Note that to read the BIA, we must unmap the SIF registers - * by clearing bit 2 of CONTROL_REG0 (SIFSEL), as the data - * will reside in the same logical location. For this reason, - * _never_ read the BIA while the Eagle processor is running! - * The SIF will be completely inaccessible until the BIA operation - * is complete. - * - */ -static void madgemc_read_rom(struct net_device *dev, struct card_info *card) -{ - unsigned long ioaddr; - unsigned char reg0, reg1, tmpreg0, i; - - ioaddr = dev->base_addr; - - reg0 = inb(ioaddr + MC_CONTROL_REG0); - reg1 = inb(ioaddr + MC_CONTROL_REG1); - - /* Switch to page zero and unmap SIF */ - tmpreg0 = reg0 & ~(MC_CONTROL_REG0_PAGE + MC_CONTROL_REG0_SIFSEL); - outb(tmpreg0, ioaddr + MC_CONTROL_REG0); - - card->manid = inb(ioaddr + MC_ROM_MANUFACTURERID); - card->cardtype = inb(ioaddr + MC_ROM_ADAPTERID); - card->cardrev = inb(ioaddr + MC_ROM_REVISION); - - /* Switch to rom page one */ - outb(tmpreg0 | MC_CONTROL_REG0_PAGE, ioaddr + MC_CONTROL_REG0); - - /* Read BIA */ - dev->addr_len = 6; - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i); - - /* Restore original register values */ - outb(reg0, ioaddr + MC_CONTROL_REG0); - outb(reg1, ioaddr + MC_CONTROL_REG1); -} - -static int madgemc_open(struct net_device *dev) -{ - /* - * Go ahead and reinitialize the chipset again, just to - * make sure we didn't get left in a bad state. - */ - madgemc_chipset_init(dev); - tms380tr_open(dev); - return 0; -} - -static int madgemc_close(struct net_device *dev) -{ - tms380tr_close(dev); - madgemc_chipset_close(dev); - return 0; -} - -/* - * Give some details available from /proc/mca/slotX - */ -static int madgemc_mcaproc(char *buf, int slot, void *d) -{ - struct net_device *dev = (struct net_device *)d; - struct net_local *tp = netdev_priv(dev); - struct card_info *curcard = tp->tmspriv; - int len = 0; - - len += sprintf(buf+len, "-------\n"); - if (curcard) { - len += sprintf(buf+len, "Card Revision: %d\n", curcard->cardrev); - len += sprintf(buf+len, "RAM Size: %dkb\n", curcard->ramsize); - len += sprintf(buf+len, "Cable type: %s\n", (curcard->cabletype)?"STP/DB9":"UTP/RJ-45"); - len += sprintf(buf+len, "Configured ring speed: %dMb/sec\n", (curcard->ringspeed)?16:4); - len += sprintf(buf+len, "Running ring speed: %dMb/sec\n", (tp->DataRate==SPEED_16)?16:4); - len += sprintf(buf+len, "Device: %s\n", dev->name); - len += sprintf(buf+len, "IO Port: 0x%04lx\n", dev->base_addr); - len += sprintf(buf+len, "IRQ: %d\n", dev->irq); - len += sprintf(buf+len, "Arbitration Level: %d\n", curcard->arblevel); - len += sprintf(buf+len, "Burst Mode: "); - switch(curcard->burstmode) { - case 0: len += sprintf(buf+len, "Cycle steal"); break; - case 1: len += sprintf(buf+len, "Limited burst"); break; - case 2: len += sprintf(buf+len, "Delayed release"); break; - case 3: len += sprintf(buf+len, "Immediate release"); break; - } - len += sprintf(buf+len, " (%s)\n", (curcard->fairness)?"Unfair":"Fair"); - - len += sprintf(buf+len, "Ring Station Address: %pM\n", - dev->dev_addr); - } else - len += sprintf(buf+len, "Card not configured\n"); - - return len; -} - -static int __devexit madgemc_remove(struct device *device) -{ - struct net_device *dev = dev_get_drvdata(device); - struct net_local *tp; - struct card_info *card; - - BUG_ON(!dev); - - tp = netdev_priv(dev); - card = tp->tmspriv; - kfree(card); - tp->tmspriv = NULL; - - unregister_netdev(dev); - release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT); - free_irq(dev->irq, dev); - tmsdev_term(dev); - free_netdev(dev); - dev_set_drvdata(device, NULL); - - return 0; -} - -static short madgemc_adapter_ids[] __initdata = { - 0x002d, - 0x0000 -}; - -static struct mca_driver madgemc_driver = { - .id_table = madgemc_adapter_ids, - .driver = { - .name = "madgemc", - .bus = &mca_bus_type, - .probe = madgemc_probe, - .remove = __devexit_p(madgemc_remove), - }, -}; - -static int __init madgemc_init (void) -{ - madgemc_netdev_ops = tms380tr_netdev_ops; - madgemc_netdev_ops.ndo_open = madgemc_open; - madgemc_netdev_ops.ndo_stop = madgemc_close; - - return mca_register_driver (&madgemc_driver); -} - -static void __exit madgemc_exit (void) -{ - mca_unregister_driver (&madgemc_driver); -} - -module_init(madgemc_init); -module_exit(madgemc_exit); - -MODULE_LICENSE("GPL"); - diff --git a/drivers/net/tokenring/madgemc.h b/drivers/net/tokenring/madgemc.h deleted file mode 100644 index fe88e272c531..000000000000 --- a/drivers/net/tokenring/madgemc.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * madgemc.h: Header for the madgemc tms380tr module - * - * Authors: - * - Adam Fritzler - */ - -#ifndef __LINUX_MADGEMC_H -#define __LINUX_MADGEMC_H - -#ifdef __KERNEL__ - -#define MADGEMC16_CARDNAME "Madge Smart 16/4 MC16 Ringnode" -#define MADGEMC32_CARDNAME "Madge Smart 16/4 MC32 Ringnode" - -/* - * Bit definitions for the POS config registers - */ -#define MC16_POS0_ADDR1 0x20 -#define MC16_POS2_ADDR2 0x04 -#define MC16_POS3_ADDR3 0x20 - -#define MC_CONTROL_REG0 ((long)-8) /* 0x00 */ -#define MC_CONTROL_REG1 ((long)-7) /* 0x01 */ -#define MC_ADAPTER_POS_REG0 ((long)-6) /* 0x02 */ -#define MC_ADAPTER_POS_REG1 ((long)-5) /* 0x03 */ -#define MC_ADAPTER_POS_REG2 ((long)-4) /* 0x04 */ -#define MC_ADAPTER_REG5_UNUSED ((long)-3) /* 0x05 */ -#define MC_ADAPTER_REG6_UNUSED ((long)-2) /* 0x06 */ -#define MC_CONTROL_REG7 ((long)-1) /* 0x07 */ - -#define MC_CONTROL_REG0_UNKNOWN1 0x01 -#define MC_CONTROL_REG0_UNKNOWN2 0x02 -#define MC_CONTROL_REG0_SIFSEL 0x04 -#define MC_CONTROL_REG0_PAGE 0x08 -#define MC_CONTROL_REG0_TESTINTERRUPT 0x10 -#define MC_CONTROL_REG0_UNKNOWN20 0x20 -#define MC_CONTROL_REG0_SINTR 0x40 -#define MC_CONTROL_REG0_UNKNOWN80 0x80 - -#define MC_CONTROL_REG1_SINTEN 0x01 -#define MC_CONTROL_REG1_BITOFDEATH 0x02 -#define MC_CONTROL_REG1_NSRESET 0x04 -#define MC_CONTROL_REG1_UNKNOWN8 0x08 -#define MC_CONTROL_REG1_UNKNOWN10 0x10 -#define MC_CONTROL_REG1_UNKNOWN20 0x20 -#define MC_CONTROL_REG1_SRSX 0x40 -#define MC_CONTROL_REG1_SPEED_SEL 0x80 - -#define MC_CONTROL_REG7_CABLESTP 0x00 -#define MC_CONTROL_REG7_CABLEUTP 0x01 - -/* - * ROM Page Zero - */ -#define MC_ROM_MANUFACTURERID 0x00 -#define MC_ROM_ADAPTERID 0x01 -#define MC_ROM_REVISION 0x02 -#define MC_ROM_CONFIG0 0x03 -#define MC_ROM_CONFIG1 0x04 -#define MC_ROM_CONFIG2 0x05 - -/* - * ROM Page One - */ -#define MC_ROM_UNUSED_BYTE 0x00 -#define MC_ROM_BIA_START 0x01 - -#endif /* __KERNEL__ */ -#endif /* __LINUX_MADGEMC_H */ diff --git a/drivers/net/tokenring/olympic.c b/drivers/net/tokenring/olympic.c deleted file mode 100644 index 4d45fe8bd206..000000000000 --- a/drivers/net/tokenring/olympic.c +++ /dev/null @@ -1,1737 +0,0 @@ -/* - * olympic.c (c) 1999 Peter De Schrijver All Rights Reserved - * 1999/2000 Mike Phillips (mikep@linuxtr.net) - * - * Linux driver for IBM PCI tokenring cards based on the Pit/Pit-Phy/Olympic - * chipset. - * - * Base Driver Skeleton: - * Written 1993-94 by Donald Becker. - * - * Copyright 1993 United States Government as represented by the - * Director, National Security Agency. - * - * Thanks to Erik De Cock, Adrian Bridgett and Frank Fiene for their - * assistance and perserverance with the testing of this driver. - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * 4/27/99 - Alpha Release 0.1.0 - * First release to the public - * - * 6/8/99 - Official Release 0.2.0 - * Merged into the kernel code - * 8/18/99 - Updated driver for 2.3.13 kernel to use new pci - * resource. Driver also reports the card name returned by - * the pci resource. - * 1/11/00 - Added spinlocks for smp - * 2/23/00 - Updated to dev_kfree_irq - * 3/10/00 - Fixed FDX enable which triggered other bugs also - * squashed. - * 5/20/00 - Changes to handle Olympic on LinuxPPC. Endian changes. - * The odd thing about the changes is that the fix for - * endian issues with the big-endian data in the arb, asb... - * was to always swab() the bytes, no matter what CPU. - * That's because the read[wl]() functions always swap the - * bytes on the way in on PPC. - * Fixing the hardware descriptors was another matter, - * because they weren't going through read[wl](), there all - * the results had to be in memory in le32 values. kdaaker - * - * 12/23/00 - Added minimal Cardbus support (Thanks Donald). - * - * 03/09/01 - Add new pci api, dev_base_lock, general clean up. - * - * 03/27/01 - Add new dma pci (Thanks to Kyle Lucke) and alloc_trdev - * Change proc_fs behaviour, now one entry per adapter. - * - * 04/09/01 - Couple of bug fixes to the dma unmaps and ejecting the - * adapter when live does not take the system down with it. - * - * 06/02/01 - Clean up, copy skb for small packets - * - * 06/22/01 - Add EISR error handling routines - * - * 07/19/01 - Improve bad LAA reporting, strip out freemem - * into a separate function, its called from 3 - * different places now. - * 02/09/02 - Replaced sleep_on. - * 03/01/02 - Replace access to several registers from 32 bit to - * 16 bit. Fixes alignment errors on PPC 64 bit machines. - * Thanks to Al Trautman for this one. - * 03/10/02 - Fix BUG in arb_cmd. Bug was there all along but was - * silently ignored until the error checking code - * went into version 1.0.0 - * 06/04/02 - Add correct start up sequence for the cardbus adapters. - * Required for strict compliance with pci power mgmt specs. - * To Do: - * - * Wake on lan - * - * If Problems do Occur - * Most problems can be rectified by either closing and opening the interface - * (ifconfig down and up) or rmmod and insmod'ing the driver (a bit difficult - * if compiled into the kernel). - */ - -/* Change OLYMPIC_DEBUG to 1 to get verbose, and I mean really verbose, messages */ - -#define OLYMPIC_DEBUG 0 - - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/timer.h> -#include <linux/in.h> -#include <linux/ioport.h> -#include <linux/seq_file.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/ptrace.h> -#include <linux/skbuff.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/stddef.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/bitops.h> -#include <linux/jiffies.h> - -#include <net/checksum.h> -#include <net/net_namespace.h> - -#include <asm/io.h> - -#include "olympic.h" - -/* I've got to put some intelligence into the version number so that Peter and I know - * which version of the code somebody has got. - * Version Number = a.b.c.d where a.b.c is the level of code and d is the latest author. - * So 0.0.1.pds = Peter, 0.0.1.mlp = Mike - * - * Official releases will only have an a.b.c version number format. - */ - -static char version[] = -"Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips" ; - -static char *open_maj_error[] = {"No error", "Lobe Media Test", "Physical Insertion", - "Address Verification", "Neighbor Notification (Ring Poll)", - "Request Parameters","FDX Registration Request", - "FDX Duplicate Address Check", "Station registration Query Wait", - "Unknown stage"}; - -static char *open_min_error[] = {"No error", "Function Failure", "Signal Lost", "Wire Fault", - "Ring Speed Mismatch", "Timeout","Ring Failure","Ring Beaconing", - "Duplicate Node Address","Request Parameters","Remove Received", - "Reserved", "Reserved", "No Monitor Detected for RPL", - "Monitor Contention failer for RPL", "FDX Protocol Error"}; - -/* Module parameters */ - -MODULE_AUTHOR("Mike Phillips <mikep@linuxtr.net>") ; -MODULE_DESCRIPTION("Olympic PCI/Cardbus Chipset Driver") ; - -/* Ring Speed 0,4,16,100 - * 0 = Autosense - * 4,16 = Selected speed only, no autosense - * This allows the card to be the first on the ring - * and become the active monitor. - * 100 = Nothing at present, 100mbps is autodetected - * if FDX is turned on. May be implemented in the future to - * fail if 100mpbs is not detected. - * - * WARNING: Some hubs will allow you to insert - * at the wrong speed - */ - -static int ringspeed[OLYMPIC_MAX_ADAPTERS] = {0,} ; -module_param_array(ringspeed, int, NULL, 0); - -/* Packet buffer size */ - -static int pkt_buf_sz[OLYMPIC_MAX_ADAPTERS] = {0,} ; -module_param_array(pkt_buf_sz, int, NULL, 0) ; - -/* Message Level */ - -static int message_level[OLYMPIC_MAX_ADAPTERS] = {0,} ; -module_param_array(message_level, int, NULL, 0) ; - -/* Change network_monitor to receive mac frames through the arb channel. - * Will also create a /proc/net/olympic_tr%d entry, where %d is the tr - * device, i.e. tr0, tr1 etc. - * Intended to be used to create a ring-error reporting network module - * i.e. it will give you the source address of beaconers on the ring - */ -static int network_monitor[OLYMPIC_MAX_ADAPTERS] = {0,}; -module_param_array(network_monitor, int, NULL, 0); - -static DEFINE_PCI_DEVICE_TABLE(olympic_pci_tbl) = { - {PCI_VENDOR_ID_IBM,PCI_DEVICE_ID_IBM_TR_WAKE,PCI_ANY_ID,PCI_ANY_ID,}, - { } /* Terminating Entry */ -}; -MODULE_DEVICE_TABLE(pci,olympic_pci_tbl) ; - - -static int olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent); -static int olympic_init(struct net_device *dev); -static int olympic_open(struct net_device *dev); -static netdev_tx_t olympic_xmit(struct sk_buff *skb, - struct net_device *dev); -static int olympic_close(struct net_device *dev); -static void olympic_set_rx_mode(struct net_device *dev); -static void olympic_freemem(struct net_device *dev) ; -static irqreturn_t olympic_interrupt(int irq, void *dev_id); -static int olympic_set_mac_address(struct net_device *dev, void *addr) ; -static void olympic_arb_cmd(struct net_device *dev); -static int olympic_change_mtu(struct net_device *dev, int mtu); -static void olympic_srb_bh(struct net_device *dev) ; -static void olympic_asb_bh(struct net_device *dev) ; -static const struct file_operations olympic_proc_ops; - -static const struct net_device_ops olympic_netdev_ops = { - .ndo_open = olympic_open, - .ndo_stop = olympic_close, - .ndo_start_xmit = olympic_xmit, - .ndo_change_mtu = olympic_change_mtu, - .ndo_set_rx_mode = olympic_set_rx_mode, - .ndo_set_mac_address = olympic_set_mac_address, -}; - -static int __devinit olympic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct net_device *dev ; - struct olympic_private *olympic_priv; - static int card_no = -1 ; - int i ; - - card_no++ ; - - if ((i = pci_enable_device(pdev))) { - return i ; - } - - pci_set_master(pdev); - - if ((i = pci_request_regions(pdev,"olympic"))) { - goto op_disable_dev; - } - - dev = alloc_trdev(sizeof(struct olympic_private)) ; - if (!dev) { - i = -ENOMEM; - goto op_release_dev; - } - - olympic_priv = netdev_priv(dev) ; - - spin_lock_init(&olympic_priv->olympic_lock) ; - - init_waitqueue_head(&olympic_priv->srb_wait); - init_waitqueue_head(&olympic_priv->trb_wait); -#if OLYMPIC_DEBUG - printk(KERN_INFO "pci_device: %p, dev:%p, dev->priv: %p\n", pdev, dev, netdev_priv(dev)); -#endif - dev->irq=pdev->irq; - dev->base_addr=pci_resource_start(pdev, 0); - olympic_priv->olympic_card_name = pci_name(pdev); - olympic_priv->pdev = pdev; - olympic_priv->olympic_mmio = ioremap(pci_resource_start(pdev,1),256); - olympic_priv->olympic_lap = ioremap(pci_resource_start(pdev,2),2048); - if (!olympic_priv->olympic_mmio || !olympic_priv->olympic_lap) { - goto op_free_iomap; - } - - if ((pkt_buf_sz[card_no] < 100) || (pkt_buf_sz[card_no] > 18000) ) - olympic_priv->pkt_buf_sz = PKT_BUF_SZ ; - else - olympic_priv->pkt_buf_sz = pkt_buf_sz[card_no] ; - - dev->mtu = olympic_priv->pkt_buf_sz - TR_HLEN ; - olympic_priv->olympic_ring_speed = ringspeed[card_no] ; - olympic_priv->olympic_message_level = message_level[card_no] ; - olympic_priv->olympic_network_monitor = network_monitor[card_no]; - - if ((i = olympic_init(dev))) { - goto op_free_iomap; - } - - dev->netdev_ops = &olympic_netdev_ops; - SET_NETDEV_DEV(dev, &pdev->dev); - - pci_set_drvdata(pdev,dev) ; - register_netdev(dev) ; - printk("Olympic: %s registered as: %s\n",olympic_priv->olympic_card_name,dev->name); - if (olympic_priv->olympic_network_monitor) { /* Must go after register_netdev as we need the device name */ - char proc_name[20] ; - strcpy(proc_name,"olympic_") ; - strcat(proc_name,dev->name) ; - proc_create_data(proc_name, 0, init_net.proc_net, &olympic_proc_ops, dev); - printk("Olympic: Network Monitor information: /proc/%s\n",proc_name); - } - return 0 ; - -op_free_iomap: - if (olympic_priv->olympic_mmio) - iounmap(olympic_priv->olympic_mmio); - if (olympic_priv->olympic_lap) - iounmap(olympic_priv->olympic_lap); - - free_netdev(dev); -op_release_dev: - pci_release_regions(pdev); - -op_disable_dev: - pci_disable_device(pdev); - return i; -} - -static int olympic_init(struct net_device *dev) -{ - struct olympic_private *olympic_priv; - u8 __iomem *olympic_mmio, *init_srb,*adapter_addr; - unsigned long t; - unsigned int uaa_addr; - - olympic_priv=netdev_priv(dev); - olympic_mmio=olympic_priv->olympic_mmio; - - printk("%s\n", version); - printk("%s. I/O at %hx, MMIO at %p, LAP at %p, using irq %d\n", olympic_priv->olympic_card_name, (unsigned int) dev->base_addr,olympic_priv->olympic_mmio, olympic_priv->olympic_lap, dev->irq); - - writel(readl(olympic_mmio+BCTL) | BCTL_SOFTRESET,olympic_mmio+BCTL); - t=jiffies; - while((readl(olympic_mmio+BCTL)) & BCTL_SOFTRESET) { - schedule(); - if(time_after(jiffies, t + 40*HZ)) { - printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); - return -ENODEV; - } - } - - - /* Needed for cardbus */ - if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { - writel(readl(olympic_priv->olympic_mmio+FERMASK)|FERMASK_INT_BIT, olympic_mmio+FERMASK); - } - -#if OLYMPIC_DEBUG - printk("BCTL: %x\n",readl(olympic_mmio+BCTL)); - printk("GPR: %x\n",readw(olympic_mmio+GPR)); - printk("SISRMASK: %x\n",readl(olympic_mmio+SISR_MASK)); -#endif - /* Aaaahhh, You have got to be real careful setting GPR, the card - holds the previous values from flash memory, including autosense - and ring speed */ - - writel(readl(olympic_mmio+BCTL)|BCTL_MIMREB,olympic_mmio+BCTL); - - if (olympic_priv->olympic_ring_speed == 0) { /* Autosense */ - writew(readw(olympic_mmio+GPR)|GPR_AUTOSENSE,olympic_mmio+GPR); - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Ringspeed autosense mode on\n",olympic_priv->olympic_card_name); - } else if (olympic_priv->olympic_ring_speed == 16) { - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Trying to open at 16 Mbps as requested\n", olympic_priv->olympic_card_name); - writew(GPR_16MBPS, olympic_mmio+GPR); - } else if (olympic_priv->olympic_ring_speed == 4) { - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Trying to open at 4 Mbps as requested\n", olympic_priv->olympic_card_name) ; - writew(0, olympic_mmio+GPR); - } - - writew(readw(olympic_mmio+GPR)|GPR_NEPTUNE_BF,olympic_mmio+GPR); - -#if OLYMPIC_DEBUG - printk("GPR = %x\n",readw(olympic_mmio + GPR) ) ; -#endif - /* Solo has been paused to meet the Cardbus power - * specs if the adapter is cardbus. Check to - * see its been paused and then restart solo. The - * adapter should set the pause bit within 1 second. - */ - - if(!(readl(olympic_mmio+BCTL) & BCTL_MODE_INDICATOR)) { - t=jiffies; - while (!(readl(olympic_mmio+CLKCTL) & CLKCTL_PAUSE)) { - schedule() ; - if(time_after(jiffies, t + 2*HZ)) { - printk(KERN_ERR "IBM Cardbus tokenring adapter not responsing.\n") ; - return -ENODEV; - } - } - writel(readl(olympic_mmio+CLKCTL) & ~CLKCTL_PAUSE, olympic_mmio+CLKCTL) ; - } - - /* start solo init */ - writel((1<<15),olympic_mmio+SISR_MASK_SUM); - - t=jiffies; - while(!((readl(olympic_mmio+SISR_RR)) & SISR_SRB_REPLY)) { - schedule(); - if(time_after(jiffies, t + 15*HZ)) { - printk(KERN_ERR "IBM PCI tokenring card not responding.\n"); - return -ENODEV; - } - } - - writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); - -#if OLYMPIC_DEBUG - printk("LAPWWO: %x, LAPA: %x\n",readl(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); -#endif - - init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); - -#if OLYMPIC_DEBUG -{ - int i; - printk("init_srb(%p): ",init_srb); - for(i=0;i<20;i++) - printk("%x ",readb(init_srb+i)); - printk("\n"); -} -#endif - if(readw(init_srb+6)) { - printk(KERN_INFO "tokenring card initialization failed. errorcode : %x\n",readw(init_srb+6)); - return -ENODEV; - } - - if (olympic_priv->olympic_message_level) { - if ( readb(init_srb +2) & 0x40) { - printk(KERN_INFO "Olympic: Adapter is FDX capable.\n") ; - } else { - printk(KERN_INFO "Olympic: Adapter cannot do FDX.\n"); - } - } - - uaa_addr=swab16(readw(init_srb+8)); - -#if OLYMPIC_DEBUG - printk("UAA resides at %x\n",uaa_addr); -#endif - - writel(uaa_addr,olympic_mmio+LAPA); - adapter_addr=olympic_priv->olympic_lap + (uaa_addr & (~0xf800)); - - memcpy_fromio(&dev->dev_addr[0], adapter_addr,6); - -#if OLYMPIC_DEBUG - printk("adapter address: %pM\n", dev->dev_addr); -#endif - - olympic_priv->olympic_addr_table_addr = swab16(readw(init_srb + 12)); - olympic_priv->olympic_parms_addr = swab16(readw(init_srb + 14)); - - return 0; - -} - -static int olympic_open(struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*init_srb; - unsigned long flags, t; - int i, open_finished = 1 ; - u8 resp, err; - - DECLARE_WAITQUEUE(wait,current) ; - - olympic_init(dev); - - if (request_irq(dev->irq, olympic_interrupt, IRQF_SHARED , "olympic", - dev)) - return -EAGAIN; - -#if OLYMPIC_DEBUG - printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); - printk("pending ints: %x\n",readl(olympic_mmio+SISR_RR)); -#endif - - writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); - - writel(SISR_MI | SISR_SRB_REPLY, olympic_mmio+SISR_MASK); /* more ints later, doesn't stop arb cmd interrupt */ - - writel(LISR_LIE,olympic_mmio+LISR); /* more ints later */ - - /* adapter is closed, so SRB is pointed to by LAPWWO */ - - writel(readw(olympic_mmio+LAPWWO),olympic_mmio+LAPA); - init_srb=olympic_priv->olympic_lap + ((readw(olympic_mmio+LAPWWO)) & (~0xf800)); - -#if OLYMPIC_DEBUG - printk("LAPWWO: %x, LAPA: %x\n",readw(olympic_mmio+LAPWWO), readl(olympic_mmio+LAPA)); - printk("SISR Mask = %04x\n", readl(olympic_mmio+SISR_MASK)); - printk("Before the open command\n"); -#endif - do { - memset_io(init_srb,0,SRB_COMMAND_SIZE); - - writeb(SRB_OPEN_ADAPTER,init_srb) ; /* open */ - writeb(OLYMPIC_CLEAR_RET_CODE,init_srb+2); - - /* If Network Monitor, instruct card to copy MAC frames through the ARB */ - if (olympic_priv->olympic_network_monitor) - writew(swab16(OPEN_ADAPTER_ENABLE_FDX | OPEN_ADAPTER_PASS_ADC_MAC | OPEN_ADAPTER_PASS_ATT_MAC | OPEN_ADAPTER_PASS_BEACON), init_srb+8); - else - writew(swab16(OPEN_ADAPTER_ENABLE_FDX), init_srb+8); - - /* Test OR of first 3 bytes as its totally possible for - * someone to set the first 2 bytes to be zero, although this - * is an error, the first byte must have bit 6 set to 1 */ - - if (olympic_priv->olympic_laa[0] | olympic_priv->olympic_laa[1] | olympic_priv->olympic_laa[2]) { - writeb(olympic_priv->olympic_laa[0],init_srb+12); - writeb(olympic_priv->olympic_laa[1],init_srb+13); - writeb(olympic_priv->olympic_laa[2],init_srb+14); - writeb(olympic_priv->olympic_laa[3],init_srb+15); - writeb(olympic_priv->olympic_laa[4],init_srb+16); - writeb(olympic_priv->olympic_laa[5],init_srb+17); - memcpy(dev->dev_addr,olympic_priv->olympic_laa,dev->addr_len) ; - } - writeb(1,init_srb+30); - - spin_lock_irqsave(&olympic_priv->olympic_lock,flags); - olympic_priv->srb_queued=1; - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); - - t = jiffies ; - - add_wait_queue(&olympic_priv->srb_wait,&wait) ; - set_current_state(TASK_INTERRUPTIBLE) ; - - while(olympic_priv->srb_queued) { - schedule() ; - if(signal_pending(current)) { - printk(KERN_WARNING "%s: Signal received in open.\n", - dev->name); - printk(KERN_WARNING "SISR=%x LISR=%x\n", - readl(olympic_mmio+SISR), - readl(olympic_mmio+LISR)); - olympic_priv->srb_queued=0; - break; - } - if (time_after(jiffies, t + 10*HZ)) { - printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); - olympic_priv->srb_queued=0; - break ; - } - set_current_state(TASK_INTERRUPTIBLE) ; - } - remove_wait_queue(&olympic_priv->srb_wait,&wait) ; - set_current_state(TASK_RUNNING) ; - olympic_priv->srb_queued = 0 ; -#if OLYMPIC_DEBUG - printk("init_srb(%p): ",init_srb); - for(i=0;i<20;i++) - printk("%02x ",readb(init_srb+i)); - printk("\n"); -#endif - - /* If we get the same return response as we set, the interrupt wasn't raised and the open - * timed out. - */ - - switch (resp = readb(init_srb+2)) { - case OLYMPIC_CLEAR_RET_CODE: - printk(KERN_WARNING "%s: Adapter Open time out or error.\n", dev->name) ; - goto out; - case 0: - open_finished = 1; - break; - case 0x07: - if (!olympic_priv->olympic_ring_speed && open_finished) { /* Autosense , first time around */ - printk(KERN_WARNING "%s: Retrying at different ring speed\n", dev->name); - open_finished = 0 ; - continue; - } - - err = readb(init_srb+7); - - if (!olympic_priv->olympic_ring_speed && ((err & 0x0f) == 0x0d)) { - printk(KERN_WARNING "%s: Tried to autosense ring speed with no monitors present\n",dev->name); - printk(KERN_WARNING "%s: Please try again with a specified ring speed\n",dev->name); - } else { - printk(KERN_WARNING "%s: %s - %s\n", dev->name, - open_maj_error[(err & 0xf0) >> 4], - open_min_error[(err & 0x0f)]); - } - goto out; - - case 0x32: - printk(KERN_WARNING "%s: Invalid LAA: %pM\n", - dev->name, olympic_priv->olympic_laa); - goto out; - - default: - printk(KERN_WARNING "%s: Bad OPEN response: %x\n", dev->name, resp); - goto out; - - } - } while (!(open_finished)) ; /* Will only loop if ring speed mismatch re-open attempted && autosense is on */ - - if (readb(init_srb+18) & (1<<3)) - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Opened in FDX Mode\n",dev->name); - - if (readb(init_srb+18) & (1<<1)) - olympic_priv->olympic_ring_speed = 100 ; - else if (readb(init_srb+18) & 1) - olympic_priv->olympic_ring_speed = 16 ; - else - olympic_priv->olympic_ring_speed = 4 ; - - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Opened in %d Mbps mode\n",dev->name, olympic_priv->olympic_ring_speed); - - olympic_priv->asb = swab16(readw(init_srb+8)); - olympic_priv->srb = swab16(readw(init_srb+10)); - olympic_priv->arb = swab16(readw(init_srb+12)); - olympic_priv->trb = swab16(readw(init_srb+16)); - - olympic_priv->olympic_receive_options = 0x01 ; - olympic_priv->olympic_copy_all_options = 0 ; - - /* setup rx ring */ - - writel((3<<16),olympic_mmio+BMCTL_RWM); /* Ensure end of frame generated interrupts */ - - writel(BMCTL_RX_DIS|3,olympic_mmio+BMCTL_RWM); /* Yes, this the enables RX channel */ - - for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { - - struct sk_buff *skb; - - skb=dev_alloc_skb(olympic_priv->pkt_buf_sz); - if(skb == NULL) - break; - - skb->dev = dev; - - olympic_priv->olympic_rx_ring[i].buffer = cpu_to_le32(pci_map_single(olympic_priv->pdev, - skb->data,olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)) ; - olympic_priv->olympic_rx_ring[i].res_length = cpu_to_le32(olympic_priv->pkt_buf_sz); - olympic_priv->rx_ring_skb[i]=skb; - } - - if (i==0) { - printk(KERN_WARNING "%s: Not enough memory to allocate rx buffers. Adapter disabled\n",dev->name); - goto out; - } - - olympic_priv->rx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_rx_ring, - sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); - writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXDESCQ); - writel(olympic_priv->rx_ring_dma_addr, olympic_mmio+RXCDA); - writew(i, olympic_mmio+RXDESCQCNT); - - olympic_priv->rx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_rx_status_ring, - sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); - writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXSTATQ); - writel(olympic_priv->rx_status_ring_dma_addr, olympic_mmio+RXCSA); - - olympic_priv->rx_ring_last_received = OLYMPIC_RX_RING_SIZE - 1; /* last processed rx status */ - olympic_priv->rx_status_last_received = OLYMPIC_RX_RING_SIZE - 1; - - writew(i, olympic_mmio+RXSTATQCNT); - -#if OLYMPIC_DEBUG - printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); - printk("RXCSA: %x, rx_status_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); - printk(" stat_ring[1]: %p, stat_ring[2]: %p, stat_ring[3]: %p\n", &(olympic_priv->olympic_rx_status_ring[1]), &(olympic_priv->olympic_rx_status_ring[2]), &(olympic_priv->olympic_rx_status_ring[3]) ); - printk(" stat_ring[4]: %p, stat_ring[5]: %p, stat_ring[6]: %p\n", &(olympic_priv->olympic_rx_status_ring[4]), &(olympic_priv->olympic_rx_status_ring[5]), &(olympic_priv->olympic_rx_status_ring[6]) ); - printk(" stat_ring[7]: %p\n", &(olympic_priv->olympic_rx_status_ring[7]) ); - - printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); - printk("Rx_ring_dma_addr = %08x, rx_status_dma_addr = %08x\n", - olympic_priv->rx_ring_dma_addr,olympic_priv->rx_status_ring_dma_addr) ; -#endif - - writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | i,olympic_mmio+RXENQ); - -#if OLYMPIC_DEBUG - printk("# of rx buffers: %d, RXENQ: %x\n",i, readw(olympic_mmio+RXENQ)); - printk("RXCSA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCSA),&olympic_priv->olympic_rx_status_ring[0]); - printk("RXCDA: %x, rx_ring[0]: %p\n",readl(olympic_mmio+RXCDA),&olympic_priv->olympic_rx_ring[0]); -#endif - - writel(SISR_RX_STATUS | SISR_RX_NOBUF,olympic_mmio+SISR_MASK_SUM); - - /* setup tx ring */ - - writel(BMCTL_TX1_DIS,olympic_mmio+BMCTL_RWM); /* Yes, this enables TX channel 1 */ - for(i=0;i<OLYMPIC_TX_RING_SIZE;i++) - olympic_priv->olympic_tx_ring[i].buffer=cpu_to_le32(0xdeadbeef); - - olympic_priv->free_tx_ring_entries=OLYMPIC_TX_RING_SIZE; - olympic_priv->tx_ring_dma_addr = pci_map_single(olympic_priv->pdev,olympic_priv->olympic_tx_ring, - sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE,PCI_DMA_TODEVICE) ; - writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXDESCQ_1); - writel(olympic_priv->tx_ring_dma_addr, olympic_mmio+TXCDA_1); - writew(OLYMPIC_TX_RING_SIZE, olympic_mmio+TXDESCQCNT_1); - - olympic_priv->tx_status_ring_dma_addr = pci_map_single(olympic_priv->pdev, olympic_priv->olympic_tx_status_ring, - sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); - writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXSTATQ_1); - writel(olympic_priv->tx_status_ring_dma_addr,olympic_mmio+TXCSA_1); - writew(OLYMPIC_TX_RING_SIZE,olympic_mmio+TXSTATQCNT_1); - - olympic_priv->tx_ring_free=0; /* next entry in tx ring to use */ - olympic_priv->tx_ring_last_status=OLYMPIC_TX_RING_SIZE-1; /* last processed tx status */ - - writel(0xffffffff, olympic_mmio+EISR_RWM) ; /* clean the eisr */ - writel(0,olympic_mmio+EISR) ; - writel(EISR_MASK_OPTIONS,olympic_mmio+EISR_MASK) ; /* enables most of the TX error interrupts */ - writel(SISR_TX1_EOF | SISR_ADAPTER_CHECK | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_ASB_FREE | SISR_ERR,olympic_mmio+SISR_MASK_SUM); - -#if OLYMPIC_DEBUG - printk("BMCTL: %x\n",readl(olympic_mmio+BMCTL_SUM)); - printk("SISR MASK: %x\n",readl(olympic_mmio+SISR_MASK)); -#endif - - if (olympic_priv->olympic_network_monitor) { - u8 __iomem *oat; - u8 __iomem *opt; - u8 addr[6]; - oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr); - opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr); - - for (i = 0; i < 6; i++) - addr[i] = readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr)+i); - printk("%s: Node Address: %pM\n", dev->name, addr); - printk("%s: Functional Address: %02x:%02x:%02x:%02x\n",dev->name, - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); - - for (i = 0; i < 6; i++) - addr[i] = readb(opt+offsetof(struct olympic_parameters_table, up_node_addr)+i); - printk("%s: NAUN Address: %pM\n", dev->name, addr); - } - - netif_start_queue(dev); - return 0; - -out: - free_irq(dev->irq, dev); - return -EIO; -} - -/* - * When we enter the rx routine we do not know how many frames have been - * queued on the rx channel. Therefore we start at the next rx status - * position and travel around the receive ring until we have completed - * all the frames. - * - * This means that we may process the frame before we receive the end - * of frame interrupt. This is why we always test the status instead - * of blindly processing the next frame. - * - * We also remove the last 4 bytes from the packet as well, these are - * just token ring trailer info and upset protocols that don't check - * their own length, i.e. SNA. - * - */ -static void olympic_rx(struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; - struct olympic_rx_status *rx_status; - struct olympic_rx_desc *rx_desc ; - int rx_ring_last_received,length, buffer_cnt, cpy_length, frag_len; - struct sk_buff *skb, *skb2; - int i; - - rx_status=&(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received + 1) & (OLYMPIC_RX_RING_SIZE - 1)]) ; - - while (rx_status->status_buffercnt) { - u32 l_status_buffercnt; - - olympic_priv->rx_status_last_received++ ; - olympic_priv->rx_status_last_received &= (OLYMPIC_RX_RING_SIZE -1); -#if OLYMPIC_DEBUG - printk("rx status: %x rx len: %x\n", le32_to_cpu(rx_status->status_buffercnt), le32_to_cpu(rx_status->fragmentcnt_framelen)); -#endif - length = le32_to_cpu(rx_status->fragmentcnt_framelen) & 0xffff; - buffer_cnt = le32_to_cpu(rx_status->status_buffercnt) & 0xffff; - i = buffer_cnt ; /* Need buffer_cnt later for rxenq update */ - frag_len = le32_to_cpu(rx_status->fragmentcnt_framelen) >> 16; - -#if OLYMPIC_DEBUG - printk("length: %x, frag_len: %x, buffer_cnt: %x\n", length, frag_len, buffer_cnt); -#endif - l_status_buffercnt = le32_to_cpu(rx_status->status_buffercnt); - if(l_status_buffercnt & 0xC0000000) { - if (l_status_buffercnt & 0x3B000000) { - if (olympic_priv->olympic_message_level) { - if (l_status_buffercnt & (1<<29)) /* Rx Frame Truncated */ - printk(KERN_WARNING "%s: Rx Frame Truncated\n",dev->name); - if (l_status_buffercnt & (1<<28)) /*Rx receive overrun */ - printk(KERN_WARNING "%s: Rx Frame Receive overrun\n",dev->name); - if (l_status_buffercnt & (1<<27)) /* No receive buffers */ - printk(KERN_WARNING "%s: No receive buffers\n",dev->name); - if (l_status_buffercnt & (1<<25)) /* Receive frame error detect */ - printk(KERN_WARNING "%s: Receive frame error detect\n",dev->name); - if (l_status_buffercnt & (1<<24)) /* Received Error Detect */ - printk(KERN_WARNING "%s: Received Error Detect\n",dev->name); - } - olympic_priv->rx_ring_last_received += i ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; - dev->stats.rx_errors++; - } else { - - if (buffer_cnt == 1) { - skb = dev_alloc_skb(max_t(int, olympic_priv->pkt_buf_sz,length)) ; - } else { - skb = dev_alloc_skb(length) ; - } - - if (skb == NULL) { - printk(KERN_WARNING "%s: Not enough memory to copy packet to upper layers.\n",dev->name) ; - dev->stats.rx_dropped++; - /* Update counters even though we don't transfer the frame */ - olympic_priv->rx_ring_last_received += i ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1) ; - } else { - /* Optimise based upon number of buffers used. - If only one buffer is used we can simply swap the buffers around. - If more than one then we must use the new buffer and copy the information - first. Ideally all frames would be in a single buffer, this can be tuned by - altering the buffer size. If the length of the packet is less than - 1500 bytes we're going to copy it over anyway to stop packets getting - dropped from sockets with buffers smaller than our pkt_buf_sz. */ - - if (buffer_cnt==1) { - olympic_priv->rx_ring_last_received++ ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); - rx_ring_last_received = olympic_priv->rx_ring_last_received ; - if (length > 1500) { - skb2=olympic_priv->rx_ring_skb[rx_ring_last_received] ; - /* unmap buffer */ - pci_unmap_single(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - skb_put(skb2,length-4); - skb2->protocol = tr_type_trans(skb2,dev); - olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer = - cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, - olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE)); - olympic_priv->olympic_rx_ring[rx_ring_last_received].res_length = - cpu_to_le32(olympic_priv->pkt_buf_sz); - olympic_priv->rx_ring_skb[rx_ring_last_received] = skb ; - netif_rx(skb2) ; - } else { - pci_dma_sync_single_for_cpu(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - skb_copy_from_linear_data(olympic_priv->rx_ring_skb[rx_ring_last_received], - skb_put(skb,length - 4), - length - 4); - pci_dma_sync_single_for_device(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - skb->protocol = tr_type_trans(skb,dev) ; - netif_rx(skb) ; - } - } else { - do { /* Walk the buffers */ - olympic_priv->rx_ring_last_received++ ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE -1); - rx_ring_last_received = olympic_priv->rx_ring_last_received ; - pci_dma_sync_single_for_cpu(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - rx_desc = &(olympic_priv->olympic_rx_ring[rx_ring_last_received]); - cpy_length = (i == 1 ? frag_len : le32_to_cpu(rx_desc->res_length)); - skb_copy_from_linear_data(olympic_priv->rx_ring_skb[rx_ring_last_received], - skb_put(skb, cpy_length), - cpy_length); - pci_dma_sync_single_for_device(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[rx_ring_last_received].buffer), - olympic_priv->pkt_buf_sz,PCI_DMA_FROMDEVICE) ; - } while (--i) ; - skb_trim(skb,skb->len-4) ; - skb->protocol = tr_type_trans(skb,dev); - netif_rx(skb) ; - } - dev->stats.rx_packets++ ; - dev->stats.rx_bytes += length ; - } /* if skb == null */ - } /* If status & 0x3b */ - - } else { /*if buffercnt & 0xC */ - olympic_priv->rx_ring_last_received += i ; - olympic_priv->rx_ring_last_received &= (OLYMPIC_RX_RING_SIZE - 1) ; - } - - rx_status->fragmentcnt_framelen = 0 ; - rx_status->status_buffercnt = 0 ; - rx_status = &(olympic_priv->olympic_rx_status_ring[(olympic_priv->rx_status_last_received+1) & (OLYMPIC_RX_RING_SIZE -1) ]); - - writew((((readw(olympic_mmio+RXENQ)) & 0x8000) ^ 0x8000) | buffer_cnt , olympic_mmio+RXENQ); - } /* while */ - -} - -static void olympic_freemem(struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - int i; - - for(i=0;i<OLYMPIC_RX_RING_SIZE;i++) { - if (olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] != NULL) { - dev_kfree_skb_irq(olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received]); - olympic_priv->rx_ring_skb[olympic_priv->rx_status_last_received] = NULL; - } - if (olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer != cpu_to_le32(0xdeadbeef)) { - pci_unmap_single(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_rx_ring[olympic_priv->rx_status_last_received].buffer), - olympic_priv->pkt_buf_sz, PCI_DMA_FROMDEVICE); - } - olympic_priv->rx_status_last_received++; - olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; - } - /* unmap rings */ - pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_status_ring_dma_addr, - sizeof(struct olympic_rx_status) * OLYMPIC_RX_RING_SIZE, PCI_DMA_FROMDEVICE); - pci_unmap_single(olympic_priv->pdev, olympic_priv->rx_ring_dma_addr, - sizeof(struct olympic_rx_desc) * OLYMPIC_RX_RING_SIZE, PCI_DMA_TODEVICE); - - pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_status_ring_dma_addr, - sizeof(struct olympic_tx_status) * OLYMPIC_TX_RING_SIZE, PCI_DMA_FROMDEVICE); - pci_unmap_single(olympic_priv->pdev, olympic_priv->tx_ring_dma_addr, - sizeof(struct olympic_tx_desc) * OLYMPIC_TX_RING_SIZE, PCI_DMA_TODEVICE); - - return ; -} - -static irqreturn_t olympic_interrupt(int irq, void *dev_id) -{ - struct net_device *dev= (struct net_device *)dev_id; - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; - u32 sisr; - u8 __iomem *adapter_check_area ; - - /* - * Read sisr but don't reset it yet. - * The indication bit may have been set but the interrupt latch - * bit may not be set, so we'd lose the interrupt later. - */ - sisr=readl(olympic_mmio+SISR) ; - if (!(sisr & SISR_MI)) /* Interrupt isn't for us */ - return IRQ_NONE; - sisr=readl(olympic_mmio+SISR_RR) ; /* Read & Reset sisr */ - - spin_lock(&olympic_priv->olympic_lock); - - /* Hotswap gives us this on removal */ - if (sisr == 0xffffffff) { - printk(KERN_WARNING "%s: Hotswap adapter removal.\n",dev->name) ; - spin_unlock(&olympic_priv->olympic_lock) ; - return IRQ_NONE; - } - - if (sisr & (SISR_SRB_REPLY | SISR_TX1_EOF | SISR_RX_STATUS | SISR_ADAPTER_CHECK | - SISR_ASB_FREE | SISR_ARB_CMD | SISR_TRB_REPLY | SISR_RX_NOBUF | SISR_ERR)) { - - /* If we ever get this the adapter is seriously dead. Only a reset is going to - * bring it back to life. We're talking pci bus errors and such like :( */ - if((sisr & SISR_ERR) && (readl(olympic_mmio+EISR) & EISR_MASK_OPTIONS)) { - printk(KERN_ERR "Olympic: EISR Error, EISR=%08x\n",readl(olympic_mmio+EISR)) ; - printk(KERN_ERR "The adapter must be reset to clear this condition.\n") ; - printk(KERN_ERR "Please report this error to the driver maintainer and/\n") ; - printk(KERN_ERR "or the linux-tr mailing list.\n") ; - wake_up_interruptible(&olympic_priv->srb_wait); - spin_unlock(&olympic_priv->olympic_lock) ; - return IRQ_HANDLED; - } /* SISR_ERR */ - - if(sisr & SISR_SRB_REPLY) { - if(olympic_priv->srb_queued==1) { - wake_up_interruptible(&olympic_priv->srb_wait); - } else if (olympic_priv->srb_queued==2) { - olympic_srb_bh(dev) ; - } - olympic_priv->srb_queued=0; - } /* SISR_SRB_REPLY */ - - /* We shouldn't ever miss the Tx interrupt, but the you never know, hence the loop to ensure - we get all tx completions. */ - if (sisr & SISR_TX1_EOF) { - while(olympic_priv->olympic_tx_status_ring[(olympic_priv->tx_ring_last_status + 1) & (OLYMPIC_TX_RING_SIZE-1)].status) { - olympic_priv->tx_ring_last_status++; - olympic_priv->tx_ring_last_status &= (OLYMPIC_TX_RING_SIZE-1); - olympic_priv->free_tx_ring_entries++; - dev->stats.tx_bytes += olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len; - dev->stats.tx_packets++ ; - pci_unmap_single(olympic_priv->pdev, - le32_to_cpu(olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer), - olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]->len,PCI_DMA_TODEVICE); - dev_kfree_skb_irq(olympic_priv->tx_ring_skb[olympic_priv->tx_ring_last_status]); - olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_last_status].buffer=cpu_to_le32(0xdeadbeef); - olympic_priv->olympic_tx_status_ring[olympic_priv->tx_ring_last_status].status=0; - } - netif_wake_queue(dev); - } /* SISR_TX1_EOF */ - - if (sisr & SISR_RX_STATUS) { - olympic_rx(dev); - } /* SISR_RX_STATUS */ - - if (sisr & SISR_ADAPTER_CHECK) { - netif_stop_queue(dev); - printk(KERN_WARNING "%s: Adapter Check Interrupt Raised, 8 bytes of information follow:\n", dev->name); - writel(readl(olympic_mmio+LAPWWC),olympic_mmio+LAPA); - adapter_check_area = olympic_priv->olympic_lap + ((readl(olympic_mmio+LAPWWC)) & (~0xf800)) ; - printk(KERN_WARNING "%s: Bytes %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",dev->name, readb(adapter_check_area+0), readb(adapter_check_area+1), readb(adapter_check_area+2), readb(adapter_check_area+3), readb(adapter_check_area+4), readb(adapter_check_area+5), readb(adapter_check_area+6), readb(adapter_check_area+7)) ; - spin_unlock(&olympic_priv->olympic_lock) ; - return IRQ_HANDLED; - } /* SISR_ADAPTER_CHECK */ - - if (sisr & SISR_ASB_FREE) { - /* Wake up anything that is waiting for the asb response */ - if (olympic_priv->asb_queued) { - olympic_asb_bh(dev) ; - } - } /* SISR_ASB_FREE */ - - if (sisr & SISR_ARB_CMD) { - olympic_arb_cmd(dev) ; - } /* SISR_ARB_CMD */ - - if (sisr & SISR_TRB_REPLY) { - /* Wake up anything that is waiting for the trb response */ - if (olympic_priv->trb_queued) { - wake_up_interruptible(&olympic_priv->trb_wait); - } - olympic_priv->trb_queued = 0 ; - } /* SISR_TRB_REPLY */ - - if (sisr & SISR_RX_NOBUF) { - /* According to the documentation, we don't have to do anything, but trapping it keeps it out of - /var/log/messages. */ - } /* SISR_RX_NOBUF */ - } else { - printk(KERN_WARNING "%s: Unexpected interrupt: %x\n",dev->name, sisr); - printk(KERN_WARNING "%s: SISR_MASK: %x\n",dev->name, readl(olympic_mmio+SISR_MASK)) ; - } /* One if the interrupts we want */ - writel(SISR_MI,olympic_mmio+SISR_MASK_SUM); - - spin_unlock(&olympic_priv->olympic_lock) ; - return IRQ_HANDLED; -} - -static netdev_tx_t olympic_xmit(struct sk_buff *skb, - struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; - unsigned long flags ; - - spin_lock_irqsave(&olympic_priv->olympic_lock, flags); - - netif_stop_queue(dev); - - if(olympic_priv->free_tx_ring_entries) { - olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].buffer = - cpu_to_le32(pci_map_single(olympic_priv->pdev, skb->data, skb->len,PCI_DMA_TODEVICE)); - olympic_priv->olympic_tx_ring[olympic_priv->tx_ring_free].status_length = cpu_to_le32(skb->len | (0x80000000)); - olympic_priv->tx_ring_skb[olympic_priv->tx_ring_free]=skb; - olympic_priv->free_tx_ring_entries--; - - olympic_priv->tx_ring_free++; - olympic_priv->tx_ring_free &= (OLYMPIC_TX_RING_SIZE-1); - writew((((readw(olympic_mmio+TXENQ_1)) & 0x8000) ^ 0x8000) | 1,olympic_mmio+TXENQ_1); - netif_wake_queue(dev); - spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); - return NETDEV_TX_OK; - } else { - spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); - return NETDEV_TX_BUSY; - } - -} - - -static int olympic_close(struct net_device *dev) -{ - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio,*srb; - unsigned long t,flags; - - DECLARE_WAITQUEUE(wait,current) ; - - netif_stop_queue(dev); - - writel(olympic_priv->srb,olympic_mmio+LAPA); - srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); - - writeb(SRB_CLOSE_ADAPTER,srb+0); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - - add_wait_queue(&olympic_priv->srb_wait,&wait) ; - set_current_state(TASK_INTERRUPTIBLE) ; - - spin_lock_irqsave(&olympic_priv->olympic_lock,flags); - olympic_priv->srb_queued=1; - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - spin_unlock_irqrestore(&olympic_priv->olympic_lock,flags); - - while(olympic_priv->srb_queued) { - - t = schedule_timeout_interruptible(60*HZ); - - if(signal_pending(current)) { - printk(KERN_WARNING "%s: SRB timed out.\n",dev->name); - printk(KERN_WARNING "SISR=%x MISR=%x\n",readl(olympic_mmio+SISR),readl(olympic_mmio+LISR)); - olympic_priv->srb_queued=0; - break; - } - - if (t == 0) { - printk(KERN_WARNING "%s: SRB timed out. May not be fatal.\n",dev->name); - } - olympic_priv->srb_queued=0; - } - remove_wait_queue(&olympic_priv->srb_wait,&wait) ; - - olympic_priv->rx_status_last_received++; - olympic_priv->rx_status_last_received&=OLYMPIC_RX_RING_SIZE-1; - - olympic_freemem(dev) ; - - /* reset tx/rx fifo's and busmaster logic */ - - writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); - udelay(1); - writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); - -#if OLYMPIC_DEBUG - { - int i ; - printk("srb(%p): ",srb); - for(i=0;i<4;i++) - printk("%x ",readb(srb+i)); - printk("\n"); - } -#endif - free_irq(dev->irq,dev); - - return 0; - -} - -static void olympic_set_rx_mode(struct net_device *dev) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; - u8 options = 0; - u8 __iomem *srb; - struct netdev_hw_addr *ha; - unsigned char dev_mc_address[4] ; - - writel(olympic_priv->srb,olympic_mmio+LAPA); - srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); - options = olympic_priv->olympic_copy_all_options; - - if (dev->flags&IFF_PROMISC) - options |= 0x61 ; - else - options &= ~0x61 ; - - /* Only issue the srb if there is a change in options */ - - if ((options ^ olympic_priv->olympic_copy_all_options)) { - - /* Now to issue the srb command to alter the copy.all.options */ - - writeb(SRB_MODIFY_RECEIVE_OPTIONS,srb); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - writeb(0,srb+3); - writeb(olympic_priv->olympic_receive_options,srb+4); - writeb(options,srb+5); - - olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - - olympic_priv->olympic_copy_all_options = options ; - - return ; - } - - /* Set the functional addresses we need for multicast */ - - dev_mc_address[0] = dev_mc_address[1] = dev_mc_address[2] = dev_mc_address[3] = 0 ; - - netdev_for_each_mc_addr(ha, dev) { - dev_mc_address[0] |= ha->addr[2]; - dev_mc_address[1] |= ha->addr[3]; - dev_mc_address[2] |= ha->addr[4]; - dev_mc_address[3] |= ha->addr[5]; - } - - writeb(SRB_SET_FUNC_ADDRESS,srb+0); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - writeb(0,srb+3); - writeb(0,srb+4); - writeb(0,srb+5); - writeb(dev_mc_address[0],srb+6); - writeb(dev_mc_address[1],srb+7); - writeb(dev_mc_address[2],srb+8); - writeb(dev_mc_address[3],srb+9); - - olympic_priv->srb_queued = 2 ; - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - -} - -static void olympic_srb_bh(struct net_device *dev) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u8 __iomem *olympic_mmio = olympic_priv->olympic_mmio ; - u8 __iomem *srb; - - writel(olympic_priv->srb,olympic_mmio+LAPA); - srb=olympic_priv->olympic_lap + (olympic_priv->srb & (~0xf800)); - - switch (readb(srb)) { - - /* SRB_MODIFY_RECEIVE_OPTIONS i.e. set_multicast_list options (promiscuous) - * At some point we should do something if we get an error, such as - * resetting the IFF_PROMISC flag in dev - */ - - case SRB_MODIFY_RECEIVE_OPTIONS: - switch (readb(srb+2)) { - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name) ; - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); - break ; - default: - if (olympic_priv->olympic_message_level) - printk(KERN_WARNING "%s: Receive Options Modified to %x,%x\n",dev->name,olympic_priv->olympic_copy_all_options, olympic_priv->olympic_receive_options) ; - break ; - } /* switch srb[2] */ - break ; - - /* SRB_SET_GROUP_ADDRESS - Multicast group setting - */ - - case SRB_SET_GROUP_ADDRESS: - switch (readb(srb+2)) { - case 0x00: - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name); - break ; - case 0x3c: - printk(KERN_WARNING "%s: Group/Functional address indicator bits not set correctly\n",dev->name) ; - break ; - case 0x3e: /* If we ever implement individual multicast addresses, will need to deal with this */ - printk(KERN_WARNING "%s: Group address registers full\n",dev->name) ; - break ; - case 0x55: - printk(KERN_INFO "%s: Group Address already set.\n",dev->name) ; - break ; - default: - break ; - } /* switch srb[2] */ - break ; - - /* SRB_RESET_GROUP_ADDRESS - Remove a multicast address from group list - */ - - case SRB_RESET_GROUP_ADDRESS: - switch (readb(srb+2)) { - case 0x00: - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; - break ; - case 0x39: /* Must deal with this if individual multicast addresses used */ - printk(KERN_INFO "%s: Group address not found\n",dev->name); - break ; - default: - break ; - } /* switch srb[2] */ - break ; - - - /* SRB_SET_FUNC_ADDRESS - Called by the set_rx_mode - */ - - case SRB_SET_FUNC_ADDRESS: - switch (readb(srb+2)) { - case 0x00: - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Functional Address Mask Set\n",dev->name); - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; - break ; - default: - break ; - } /* switch srb[2] */ - break ; - - /* SRB_READ_LOG - Read and reset the adapter error counters - */ - - case SRB_READ_LOG: - switch (readb(srb+2)) { - case 0x00: - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Read Log issued\n",dev->name) ; - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; - break ; - - } /* switch srb[2] */ - break ; - - /* SRB_READ_SR_COUNTERS - Read and reset the source routing bridge related counters */ - - case SRB_READ_SR_COUNTERS: - switch (readb(srb+2)) { - case 0x00: - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Read Source Routing Counters issued\n",dev->name) ; - break ; - case 0x01: - printk(KERN_WARNING "%s: Unrecognized srb command\n",dev->name); - break ; - case 0x04: - printk(KERN_WARNING "%s: Adapter must be open for this operation, doh!!\n",dev->name) ; - break ; - default: - break ; - } /* switch srb[2] */ - break ; - - default: - printk(KERN_WARNING "%s: Unrecognized srb bh return value.\n",dev->name); - break ; - } /* switch srb[0] */ - -} - -static int olympic_set_mac_address (struct net_device *dev, void *addr) -{ - struct sockaddr *saddr = addr ; - struct olympic_private *olympic_priv = netdev_priv(dev); - - if (netif_running(dev)) { - printk(KERN_WARNING "%s: Cannot set mac/laa address while card is open\n", dev->name) ; - return -EIO ; - } - - memcpy(olympic_priv->olympic_laa, saddr->sa_data,dev->addr_len) ; - - if (olympic_priv->olympic_message_level) { - printk(KERN_INFO "%s: MAC/LAA Set to = %x.%x.%x.%x.%x.%x\n",dev->name, olympic_priv->olympic_laa[0], - olympic_priv->olympic_laa[1], olympic_priv->olympic_laa[2], - olympic_priv->olympic_laa[3], olympic_priv->olympic_laa[4], - olympic_priv->olympic_laa[5]); - } - - return 0 ; -} - -static void olympic_arb_cmd(struct net_device *dev) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u8 __iomem *olympic_mmio=olympic_priv->olympic_mmio; - u8 __iomem *arb_block, *asb_block, *srb ; - u8 header_len ; - u16 frame_len, buffer_len ; - struct sk_buff *mac_frame ; - u8 __iomem *buf_ptr ; - u8 __iomem *frame_data ; - u16 buff_off ; - u16 lan_status = 0, lan_status_diff ; /* Initialize to stop compiler warning */ - u8 fdx_prot_error ; - u16 next_ptr; - - arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; - asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; - srb = (olympic_priv->olympic_lap + olympic_priv->srb) ; - - if (readb(arb_block+0) == ARB_RECEIVE_DATA) { /* Receive.data, MAC frames */ - - header_len = readb(arb_block+8) ; /* 802.5 Token-Ring Header Length */ - frame_len = swab16(readw(arb_block + 10)) ; - - buff_off = swab16(readw(arb_block + 6)) ; - - buf_ptr = olympic_priv->olympic_lap + buff_off ; - -#if OLYMPIC_DEBUG -{ - int i; - frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; - - for (i=0 ; i < 14 ; i++) { - printk("Loc %d = %02x\n",i,readb(frame_data + i)); - } - - printk("next %04x, fs %02x, len %04x\n",readw(buf_ptr+offsetof(struct mac_receive_buffer,next)), readb(buf_ptr+offsetof(struct mac_receive_buffer,frame_status)), readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); -} -#endif - mac_frame = dev_alloc_skb(frame_len) ; - if (!mac_frame) { - printk(KERN_WARNING "%s: Memory squeeze, dropping frame.\n", dev->name); - goto drop_frame; - } - - /* Walk the buffer chain, creating the frame */ - - do { - frame_data = buf_ptr+offsetof(struct mac_receive_buffer,frame_data) ; - buffer_len = swab16(readw(buf_ptr+offsetof(struct mac_receive_buffer,buffer_length))); - memcpy_fromio(skb_put(mac_frame, buffer_len), frame_data , buffer_len ) ; - next_ptr=readw(buf_ptr+offsetof(struct mac_receive_buffer,next)); - } while (next_ptr && (buf_ptr=olympic_priv->olympic_lap + swab16(next_ptr))); - - mac_frame->protocol = tr_type_trans(mac_frame, dev); - - if (olympic_priv->olympic_network_monitor) { - struct trh_hdr *mac_hdr; - printk(KERN_WARNING "%s: Received MAC Frame, details:\n",dev->name); - mac_hdr = tr_hdr(mac_frame); - printk(KERN_WARNING "%s: MAC Frame Dest. Addr: %pM\n", - dev->name, mac_hdr->daddr); - printk(KERN_WARNING "%s: MAC Frame Srce. Addr: %pM\n", - dev->name, mac_hdr->saddr); - } - netif_rx(mac_frame); - -drop_frame: - /* Now tell the card we have dealt with the received frame */ - - /* Set LISR Bit 1 */ - writel(LISR_ARB_FREE,olympic_priv->olympic_mmio + LISR_SUM); - - /* Is the ASB free ? */ - - if (readb(asb_block + 2) != 0xff) { - olympic_priv->asb_queued = 1 ; - writel(LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); - return ; - /* Drop out and wait for the bottom half to be run */ - } - - writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ - writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ - writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ - writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */ - - writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); - - olympic_priv->asb_queued = 2 ; - - return ; - - } else if (readb(arb_block) == ARB_LAN_CHANGE_STATUS) { /* Lan.change.status */ - lan_status = swab16(readw(arb_block+6)); - fdx_prot_error = readb(arb_block+8) ; - - /* Issue ARB Free */ - writel(LISR_ARB_FREE,olympic_priv->olympic_mmio+LISR_SUM); - - lan_status_diff = olympic_priv->olympic_lan_status ^ lan_status ; - - if (lan_status_diff & (LSC_LWF | LSC_ARW | LSC_FPE | LSC_RR) ) { - if (lan_status_diff & LSC_LWF) - printk(KERN_WARNING "%s: Short circuit detected on the lobe\n",dev->name); - if (lan_status_diff & LSC_ARW) - printk(KERN_WARNING "%s: Auto removal error\n",dev->name); - if (lan_status_diff & LSC_FPE) - printk(KERN_WARNING "%s: FDX Protocol Error\n",dev->name); - if (lan_status_diff & LSC_RR) - printk(KERN_WARNING "%s: Force remove MAC frame received\n",dev->name); - - /* Adapter has been closed by the hardware */ - - /* reset tx/rx fifo's and busmaster logic */ - - writel(readl(olympic_mmio+BCTL)|(3<<13),olympic_mmio+BCTL); - udelay(1); - writel(readl(olympic_mmio+BCTL)&~(3<<13),olympic_mmio+BCTL); - netif_stop_queue(dev); - olympic_priv->srb = readw(olympic_priv->olympic_lap + LAPWWO) ; - printk(KERN_WARNING "%s: Adapter has been closed\n", dev->name); - } /* If serious error */ - - if (olympic_priv->olympic_message_level) { - if (lan_status_diff & LSC_SIG_LOSS) - printk(KERN_WARNING "%s: No receive signal detected\n", dev->name); - if (lan_status_diff & LSC_HARD_ERR) - printk(KERN_INFO "%s: Beaconing\n",dev->name); - if (lan_status_diff & LSC_SOFT_ERR) - printk(KERN_WARNING "%s: Adapter transmitted Soft Error Report Mac Frame\n",dev->name); - if (lan_status_diff & LSC_TRAN_BCN) - printk(KERN_INFO "%s: We are transmitting the beacon, aaah\n",dev->name); - if (lan_status_diff & LSC_SS) - printk(KERN_INFO "%s: Single Station on the ring\n", dev->name); - if (lan_status_diff & LSC_RING_REC) - printk(KERN_INFO "%s: Ring recovery ongoing\n",dev->name); - if (lan_status_diff & LSC_FDX_MODE) - printk(KERN_INFO "%s: Operating in FDX mode\n",dev->name); - } - - if (lan_status_diff & LSC_CO) { - - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Counter Overflow\n", dev->name); - - /* Issue READ.LOG command */ - - writeb(SRB_READ_LOG, srb); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - writeb(0,srb+3); - writeb(0,srb+4); - writeb(0,srb+5); - - olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - - } - - if (lan_status_diff & LSC_SR_CO) { - - if (olympic_priv->olympic_message_level) - printk(KERN_INFO "%s: Source routing counters overflow\n", dev->name); - - /* Issue a READ.SR.COUNTERS */ - - writeb(SRB_READ_SR_COUNTERS,srb); - writeb(0,srb+1); - writeb(OLYMPIC_CLEAR_RET_CODE,srb+2); - writeb(0,srb+3); - - olympic_priv->srb_queued=2; /* Can't sleep, use srb_bh */ - - writel(LISR_SRB_CMD,olympic_mmio+LISR_SUM); - - } - - olympic_priv->olympic_lan_status = lan_status ; - - } /* Lan.change.status */ - else - printk(KERN_WARNING "%s: Unknown arb command\n", dev->name); -} - -static void olympic_asb_bh(struct net_device *dev) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u8 __iomem *arb_block, *asb_block ; - - arb_block = (olympic_priv->olympic_lap + olympic_priv->arb) ; - asb_block = (olympic_priv->olympic_lap + olympic_priv->asb) ; - - if (olympic_priv->asb_queued == 1) { /* Dropped through the first time */ - - writeb(ASB_RECEIVE_DATA,asb_block); /* Receive data */ - writeb(OLYMPIC_CLEAR_RET_CODE,asb_block+2); /* Necessary ?? */ - writeb(readb(arb_block+6),asb_block+6); /* Must send the address back to the adapter */ - writeb(readb(arb_block+7),asb_block+7); /* To let it know we have dealt with the data */ - - writel(LISR_ASB_REPLY | LISR_ASB_FREE_REQ,olympic_priv->olympic_mmio+LISR_SUM); - olympic_priv->asb_queued = 2 ; - - return ; - } - - if (olympic_priv->asb_queued == 2) { - switch (readb(asb_block+2)) { - case 0x01: - printk(KERN_WARNING "%s: Unrecognized command code\n", dev->name); - break ; - case 0x26: - printk(KERN_WARNING "%s: Unrecognized buffer address\n", dev->name); - break ; - case 0xFF: - /* Valid response, everything should be ok again */ - break ; - default: - printk(KERN_WARNING "%s: Invalid return code in asb\n",dev->name); - break ; - } - } - olympic_priv->asb_queued = 0 ; -} - -static int olympic_change_mtu(struct net_device *dev, int mtu) -{ - struct olympic_private *olympic_priv = netdev_priv(dev); - u16 max_mtu ; - - if (olympic_priv->olympic_ring_speed == 4) - max_mtu = 4500 ; - else - max_mtu = 18000 ; - - if (mtu > max_mtu) - return -EINVAL ; - if (mtu < 100) - return -EINVAL ; - - dev->mtu = mtu ; - olympic_priv->pkt_buf_sz = mtu + TR_HLEN ; - - return 0 ; -} - -static int olympic_proc_show(struct seq_file *m, void *v) -{ - struct net_device *dev = m->private; - struct olympic_private *olympic_priv=netdev_priv(dev); - u8 __iomem *oat = (olympic_priv->olympic_lap + olympic_priv->olympic_addr_table_addr) ; - u8 __iomem *opt = (olympic_priv->olympic_lap + olympic_priv->olympic_parms_addr) ; - u8 addr[6]; - u8 addr2[6]; - int i; - - seq_printf(m, - "IBM Pit/Pit-Phy/Olympic Chipset Token Ring Adapter %s\n",dev->name); - seq_printf(m, "\n%6s: Adapter Address : Node Address : Functional Addr\n", - dev->name); - - for (i = 0 ; i < 6 ; i++) - addr[i] = readb(oat+offsetof(struct olympic_adapter_addr_table,node_addr) + i); - - seq_printf(m, "%6s: %pM : %pM : %02x:%02x:%02x:%02x\n", - dev->name, - dev->dev_addr, addr, - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+1), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+2), - readb(oat+offsetof(struct olympic_adapter_addr_table,func_addr)+3)); - - seq_printf(m, "\n%6s: Token Ring Parameters Table:\n", dev->name); - - seq_printf(m, "%6s: Physical Addr : Up Node Address : Poll Address : AccPri : Auth Src : Att Code :\n", - dev->name) ; - - for (i = 0 ; i < 6 ; i++) - addr[i] = readb(opt+offsetof(struct olympic_parameters_table, up_node_addr) + i); - for (i = 0 ; i < 6 ; i++) - addr2[i] = readb(opt+offsetof(struct olympic_parameters_table, poll_addr) + i); - - seq_printf(m, "%6s: %02x:%02x:%02x:%02x : %pM : %pM : %04x : %04x : %04x :\n", - dev->name, - readb(opt+offsetof(struct olympic_parameters_table, phys_addr)), - readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+1), - readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+2), - readb(opt+offsetof(struct olympic_parameters_table, phys_addr)+3), - addr, addr2, - swab16(readw(opt+offsetof(struct olympic_parameters_table, acc_priority))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, auth_source_class))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, att_code)))); - - seq_printf(m, "%6s: Source Address : Bcn T : Maj. V : Lan St : Lcl Rg : Mon Err : Frame Correl : \n", - dev->name) ; - - for (i = 0 ; i < 6 ; i++) - addr[i] = readb(opt+offsetof(struct olympic_parameters_table, source_addr) + i); - seq_printf(m, "%6s: %pM : %04x : %04x : %04x : %04x : %04x : %04x : \n", - dev->name, addr, - swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_type))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, major_vector))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, lan_status))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, local_ring))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, mon_error))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, frame_correl)))); - - seq_printf(m, "%6s: Beacon Details : Tx : Rx : NAUN Node Address : NAUN Node Phys : \n", - dev->name) ; - - for (i = 0 ; i < 6 ; i++) - addr[i] = readb(opt+offsetof(struct olympic_parameters_table, beacon_naun) + i); - seq_printf(m, "%6s: : %02x : %02x : %pM : %02x:%02x:%02x:%02x : \n", - dev->name, - swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_transmit))), - swab16(readw(opt+offsetof(struct olympic_parameters_table, beacon_receive))), - addr, - readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)), - readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+1), - readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+2), - readb(opt+offsetof(struct olympic_parameters_table, beacon_phys)+3)); - - return 0; -} - -static int olympic_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, olympic_proc_show, PDE(inode)->data); -} - -static const struct file_operations olympic_proc_ops = { - .open = olympic_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static void __devexit olympic_remove_one(struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev) ; - struct olympic_private *olympic_priv=netdev_priv(dev); - - if (olympic_priv->olympic_network_monitor) { - char proc_name[20] ; - strcpy(proc_name,"olympic_") ; - strcat(proc_name,dev->name) ; - remove_proc_entry(proc_name,init_net.proc_net); - } - unregister_netdev(dev) ; - iounmap(olympic_priv->olympic_mmio) ; - iounmap(olympic_priv->olympic_lap) ; - pci_release_regions(pdev) ; - pci_set_drvdata(pdev,NULL) ; - free_netdev(dev) ; -} - -static struct pci_driver olympic_driver = { - .name = "olympic", - .id_table = olympic_pci_tbl, - .probe = olympic_probe, - .remove = __devexit_p(olympic_remove_one), -}; - -module_pci_driver(olympic_driver); - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/tokenring/olympic.h b/drivers/net/tokenring/olympic.h deleted file mode 100644 index 30631bae4c94..000000000000 --- a/drivers/net/tokenring/olympic.h +++ /dev/null @@ -1,321 +0,0 @@ -/* - * olympic.h (c) 1999 Peter De Schrijver All Rights Reserved - * 1999,2000 Mike Phillips (mikep@linuxtr.net) - * - * Linux driver for IBM PCI tokenring cards based on the olympic and the PIT/PHY chipset. - * - * Base Driver Skeleton: - * Written 1993-94 by Donald Becker. - * - * Copyright 1993 United States Government as represented by the - * Director, National Security Agency. - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - */ - -#define CID 0x4e - -#define BCTL 0x70 -#define BCTL_SOFTRESET (1<<15) -#define BCTL_MIMREB (1<<6) -#define BCTL_MODE_INDICATOR (1<<5) - -#define GPR 0x4a -#define GPR_OPTI_BF (1<<6) -#define GPR_NEPTUNE_BF (1<<4) -#define GPR_AUTOSENSE (1<<2) -#define GPR_16MBPS (1<<3) - -#define PAG 0x85 -#define LBC 0x8e - -#define LISR 0x10 -#define LISR_SUM 0x14 -#define LISR_RWM 0x18 - -#define LISR_LIE (1<<15) -#define LISR_SLIM (1<<13) -#define LISR_SLI (1<<12) -#define LISR_PCMSRMASK (1<<11) -#define LISR_PCMSRINT (1<<10) -#define LISR_WOLMASK (1<<9) -#define LISR_WOL (1<<8) -#define LISR_SRB_CMD (1<<5) -#define LISR_ASB_REPLY (1<<4) -#define LISR_ASB_FREE_REQ (1<<2) -#define LISR_ARB_FREE (1<<1) -#define LISR_TRB_FRAME (1<<0) - -#define SISR 0x20 -#define SISR_SUM 0x24 -#define SISR_RWM 0x28 -#define SISR_RR 0x2C -#define SISR_RESMASK 0x30 -#define SISR_MASK 0x54 -#define SISR_MASK_SUM 0x58 -#define SISR_MASK_RWM 0x5C - -#define SISR_TX2_IDLE (1<<31) -#define SISR_TX2_HALT (1<<29) -#define SISR_TX2_EOF (1<<28) -#define SISR_TX1_IDLE (1<<27) -#define SISR_TX1_HALT (1<<25) -#define SISR_TX1_EOF (1<<24) -#define SISR_TIMEOUT (1<<23) -#define SISR_RX_NOBUF (1<<22) -#define SISR_RX_STATUS (1<<21) -#define SISR_RX_HALT (1<<18) -#define SISR_RX_EOF_EARLY (1<<16) -#define SISR_MI (1<<15) -#define SISR_PI (1<<13) -#define SISR_ERR (1<<9) -#define SISR_ADAPTER_CHECK (1<<6) -#define SISR_SRB_REPLY (1<<5) -#define SISR_ASB_FREE (1<<4) -#define SISR_ARB_CMD (1<<3) -#define SISR_TRB_REPLY (1<<2) - -#define EISR 0x34 -#define EISR_RWM 0x38 -#define EISR_MASK 0x3c -#define EISR_MASK_OPTIONS 0x001FFF7F - -#define LAPA 0x60 -#define LAPWWO 0x64 -#define LAPWWC 0x68 -#define LAPCTL 0x6C -#define LAIPD 0x78 -#define LAIPDDINC 0x7C - -#define TIMER 0x50 - -#define CLKCTL 0x74 -#define CLKCTL_PAUSE (1<<15) - -#define PM_CON 0x4 - -#define BMCTL_SUM 0x40 -#define BMCTL_RWM 0x44 -#define BMCTL_TX2_DIS (1<<30) -#define BMCTL_TX1_DIS (1<<26) -#define BMCTL_RX_DIS (1<<22) - -#define BMASR 0xcc - -#define RXDESCQ 0x90 -#define RXDESCQCNT 0x94 -#define RXCDA 0x98 -#define RXENQ 0x9C -#define RXSTATQ 0xA0 -#define RXSTATQCNT 0xA4 -#define RXCSA 0xA8 -#define RXCLEN 0xAC -#define RXHLEN 0xAE - -#define TXDESCQ_1 0xb0 -#define TXDESCQ_2 0xd0 -#define TXDESCQCNT_1 0xb4 -#define TXDESCQCNT_2 0xd4 -#define TXCDA_1 0xb8 -#define TXCDA_2 0xd8 -#define TXENQ_1 0xbc -#define TXENQ_2 0xdc -#define TXSTATQ_1 0xc0 -#define TXSTATQ_2 0xe0 -#define TXSTATQCNT_1 0xc4 -#define TXSTATQCNT_2 0xe4 -#define TXCSA_1 0xc8 -#define TXCSA_2 0xe8 -/* Cardbus */ -#define FERMASK 0xf4 -#define FERMASK_INT_BIT (1<<15) - -#define OLYMPIC_IO_SPACE 256 - -#define SRB_COMMAND_SIZE 50 - -#define OLYMPIC_MAX_ADAPTERS 8 /* 0x08 __MODULE_STRING can't hand 0xnn */ - -/* Defines for LAN STATUS CHANGE reports */ -#define LSC_SIG_LOSS 0x8000 -#define LSC_HARD_ERR 0x4000 -#define LSC_SOFT_ERR 0x2000 -#define LSC_TRAN_BCN 0x1000 -#define LSC_LWF 0x0800 -#define LSC_ARW 0x0400 -#define LSC_FPE 0x0200 -#define LSC_RR 0x0100 -#define LSC_CO 0x0080 -#define LSC_SS 0x0040 -#define LSC_RING_REC 0x0020 -#define LSC_SR_CO 0x0010 -#define LSC_FDX_MODE 0x0004 - -/* Defines for OPEN ADAPTER command */ - -#define OPEN_ADAPTER_EXT_WRAP (1<<15) -#define OPEN_ADAPTER_DIS_HARDEE (1<<14) -#define OPEN_ADAPTER_DIS_SOFTERR (1<<13) -#define OPEN_ADAPTER_PASS_ADC_MAC (1<<12) -#define OPEN_ADAPTER_PASS_ATT_MAC (1<<11) -#define OPEN_ADAPTER_ENABLE_EC (1<<10) -#define OPEN_ADAPTER_CONTENDER (1<<8) -#define OPEN_ADAPTER_PASS_BEACON (1<<7) -#define OPEN_ADAPTER_ENABLE_FDX (1<<6) -#define OPEN_ADAPTER_ENABLE_RPL (1<<5) -#define OPEN_ADAPTER_INHIBIT_ETR (1<<4) -#define OPEN_ADAPTER_INTERNAL_WRAP (1<<3) -#define OPEN_ADAPTER_USE_OPTS2 (1<<0) - -#define OPEN_ADAPTER_2_ENABLE_ONNOW (1<<15) - -/* Defines for SRB Commands */ - -#define SRB_ACCESS_REGISTER 0x1f -#define SRB_CLOSE_ADAPTER 0x04 -#define SRB_CONFIGURE_BRIDGE 0x0c -#define SRB_CONFIGURE_WAKEUP_EVENT 0x1a -#define SRB_MODIFY_BRIDGE_PARMS 0x15 -#define SRB_MODIFY_OPEN_OPTIONS 0x01 -#define SRB_MODIFY_RECEIVE_OPTIONS 0x17 -#define SRB_NO_OPERATION 0x00 -#define SRB_OPEN_ADAPTER 0x03 -#define SRB_READ_LOG 0x08 -#define SRB_READ_SR_COUNTERS 0x16 -#define SRB_RESET_GROUP_ADDRESS 0x02 -#define SRB_SAVE_CONFIGURATION 0x1b -#define SRB_SET_BRIDGE_PARMS 0x09 -#define SRB_SET_BRIDGE_TARGETS 0x10 -#define SRB_SET_FUNC_ADDRESS 0x07 -#define SRB_SET_GROUP_ADDRESS 0x06 -#define SRB_SET_GROUP_ADDR_OPTIONS 0x11 -#define SRB_UPDATE_WAKEUP_PATTERN 0x19 - -/* Clear return code */ - -#define OLYMPIC_CLEAR_RET_CODE 0xfe - -/* ARB Commands */ -#define ARB_RECEIVE_DATA 0x81 -#define ARB_LAN_CHANGE_STATUS 0x84 -/* ASB Response commands */ - -#define ASB_RECEIVE_DATA 0x81 - - -/* Olympic defaults for buffers */ - -#define OLYMPIC_RX_RING_SIZE 16 /* should be a power of 2 */ -#define OLYMPIC_TX_RING_SIZE 8 /* should be a power of 2 */ - -#define PKT_BUF_SZ 4096 /* Default packet size */ - -/* Olympic data structures */ - -/* xxxx These structures are all little endian in hardware. */ - -struct olympic_tx_desc { - __le32 buffer; - __le32 status_length; -}; - -struct olympic_tx_status { - __le32 status; -}; - -struct olympic_rx_desc { - __le32 buffer; - __le32 res_length; -}; - -struct olympic_rx_status { - __le32 fragmentcnt_framelen; - __le32 status_buffercnt; -}; -/* xxxx END These structures are all little endian in hardware. */ -/* xxxx There may be more, but I'm pretty sure about these */ - -struct mac_receive_buffer { - __le16 next ; - u8 padding ; - u8 frame_status ; - __le16 buffer_length ; - u8 frame_data ; -}; - -struct olympic_private { - - u16 srb; /* be16 */ - u16 trb; /* be16 */ - u16 arb; /* be16 */ - u16 asb; /* be16 */ - - u8 __iomem *olympic_mmio; - u8 __iomem *olympic_lap; - struct pci_dev *pdev ; - const char *olympic_card_name; - - spinlock_t olympic_lock ; - - volatile int srb_queued; /* True if an SRB is still posted */ - wait_queue_head_t srb_wait; - - volatile int asb_queued; /* True if an ASB is posted */ - - volatile int trb_queued; /* True if a TRB is posted */ - wait_queue_head_t trb_wait ; - - /* These must be on a 4 byte boundary. */ - struct olympic_rx_desc olympic_rx_ring[OLYMPIC_RX_RING_SIZE]; - struct olympic_tx_desc olympic_tx_ring[OLYMPIC_TX_RING_SIZE]; - struct olympic_rx_status olympic_rx_status_ring[OLYMPIC_RX_RING_SIZE]; - struct olympic_tx_status olympic_tx_status_ring[OLYMPIC_TX_RING_SIZE]; - - struct sk_buff *tx_ring_skb[OLYMPIC_TX_RING_SIZE], *rx_ring_skb[OLYMPIC_RX_RING_SIZE]; - int tx_ring_free, tx_ring_last_status, rx_ring_last_received,rx_status_last_received, free_tx_ring_entries; - - u16 olympic_lan_status ; - u8 olympic_ring_speed ; - u16 pkt_buf_sz ; - u8 olympic_receive_options, olympic_copy_all_options,olympic_message_level, olympic_network_monitor; - u16 olympic_addr_table_addr, olympic_parms_addr ; - u8 olympic_laa[6] ; - u32 rx_ring_dma_addr; - u32 rx_status_ring_dma_addr; - u32 tx_ring_dma_addr; - u32 tx_status_ring_dma_addr; -}; - -struct olympic_adapter_addr_table { - - u8 node_addr[6] ; - u8 reserved[4] ; - u8 func_addr[4] ; -} ; - -struct olympic_parameters_table { - - u8 phys_addr[4] ; - u8 up_node_addr[6] ; - u8 up_phys_addr[4] ; - u8 poll_addr[6] ; - u16 reserved ; - u16 acc_priority ; - u16 auth_source_class ; - u16 att_code ; - u8 source_addr[6] ; - u16 beacon_type ; - u16 major_vector ; - u16 lan_status ; - u16 soft_error_time ; - u16 reserved1 ; - u16 local_ring ; - u16 mon_error ; - u16 beacon_transmit ; - u16 beacon_receive ; - u16 frame_correl ; - u8 beacon_naun[6] ; - u32 reserved2 ; - u8 beacon_phys[4] ; -}; diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c deleted file mode 100644 index 62d90e40f9ec..000000000000 --- a/drivers/net/tokenring/proteon.c +++ /dev/null @@ -1,422 +0,0 @@ -/* - * proteon.c: A network driver for Proteon ISA token ring cards. - * - * Based on tmspci written 1999 by Adam Fritzler - * - * Written 2003 by Jochen Friedrich - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This driver module supports the following cards: - * - Proteon 1392, 1392+ - * - * Maintainer(s): - * AF Adam Fritzler - * JF Jochen Friedrich jochen@scram.de - * - * Modification History: - * 02-Jan-03 JF Created - * - */ -static const char version[] = "proteon.c: v1.00 02/01/2003 by Jochen Friedrich\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/platform_device.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/pci.h> -#include <asm/dma.h> - -#include "tms380tr.h" - -#define PROTEON_IO_EXTENT 32 - -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int portlist[] __initdata = { - 0x0A20, 0x0E20, 0x1A20, 0x1E20, 0x2A20, 0x2E20, 0x3A20, 0x3E20,// Prot. - 0x4A20, 0x4E20, 0x5A20, 0x5E20, 0x6A20, 0x6E20, 0x7A20, 0x7E20,// Prot. - 0x8A20, 0x8E20, 0x9A20, 0x9E20, 0xAA20, 0xAE20, 0xBA20, 0xBE20,// Prot. - 0xCA20, 0xCE20, 0xDA20, 0xDE20, 0xEA20, 0xEE20, 0xFA20, 0xFE20,// Prot. - 0 -}; - -/* A zero-terminated list of IRQs to be probed. */ -static unsigned short irqlist[] = { - 7, 6, 5, 4, 3, 12, 11, 10, 9, - 0 -}; - -/* A zero-terminated list of DMAs to be probed. */ -static int dmalist[] __initdata = { - 5, 6, 7, - 0 -}; - -static char cardname[] = "Proteon 1392\0"; -static u64 dma_mask = ISA_MAX_ADDRESS; -static int proteon_open(struct net_device *dev); -static void proteon_read_eeprom(struct net_device *dev); -static unsigned short proteon_setnselout_pins(struct net_device *dev); - -static unsigned short proteon_sifreadb(struct net_device *dev, unsigned short reg) -{ - return inb(dev->base_addr + reg); -} - -static unsigned short proteon_sifreadw(struct net_device *dev, unsigned short reg) -{ - return inw(dev->base_addr + reg); -} - -static void proteon_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg) -{ - outb(val, dev->base_addr + reg); -} - -static void proteon_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg) -{ - outw(val, dev->base_addr + reg); -} - -static int __init proteon_probe1(struct net_device *dev, int ioaddr) -{ - unsigned char chk1, chk2; - int i; - - if (!request_region(ioaddr, PROTEON_IO_EXTENT, cardname)) - return -ENODEV; - - - chk1 = inb(ioaddr + 0x1f); /* Get Proteon ID reg 1 */ - if (chk1 != 0x1f) - goto nodev; - - chk1 = inb(ioaddr + 0x1e) & 0x07; /* Get Proteon ID reg 0 */ - for (i=0; i<16; i++) { - chk2 = inb(ioaddr + 0x1e) & 0x07; - if (((chk1 + 1) & 0x07) != chk2) - goto nodev; - chk1 = chk2; - } - - dev->base_addr = ioaddr; - return 0; -nodev: - release_region(ioaddr, PROTEON_IO_EXTENT); - return -ENODEV; -} - -static struct net_device_ops proteon_netdev_ops __read_mostly; - -static int __init setup_card(struct net_device *dev, struct device *pdev) -{ - struct net_local *tp; - static int versionprinted; - const unsigned *port; - int j,err = 0; - - if (!dev) - return -ENOMEM; - - if (dev->base_addr) /* probe specific location */ - err = proteon_probe1(dev, dev->base_addr); - else { - for (port = portlist; *port; port++) { - err = proteon_probe1(dev, *port); - if (!err) - break; - } - } - if (err) - goto out5; - - /* At this point we have found a valid card. */ - - if (versionprinted++ == 0) - printk(KERN_DEBUG "%s", version); - - err = -EIO; - pdev->dma_mask = &dma_mask; - if (tmsdev_init(dev, pdev)) - goto out4; - - dev->base_addr &= ~3; - - proteon_read_eeprom(dev); - - printk(KERN_DEBUG "proteon.c: Ring Station Address: %pM\n", - dev->dev_addr); - - tp = netdev_priv(dev); - tp->setnselout = proteon_setnselout_pins; - - tp->sifreadb = proteon_sifreadb; - tp->sifreadw = proteon_sifreadw; - tp->sifwriteb = proteon_sifwriteb; - tp->sifwritew = proteon_sifwritew; - - memcpy(tp->ProductID, cardname, PROD_ID_SIZE + 1); - - tp->tmspriv = NULL; - - dev->netdev_ops = &proteon_netdev_ops; - - if (dev->irq == 0) - { - for(j = 0; irqlist[j] != 0; j++) - { - dev->irq = irqlist[j]; - if (!request_irq(dev->irq, tms380tr_interrupt, 0, - cardname, dev)) - break; - } - - if(irqlist[j] == 0) - { - printk(KERN_INFO "proteon.c: AutoSelect no IRQ available\n"); - goto out3; - } - } - else - { - for(j = 0; irqlist[j] != 0; j++) - if (irqlist[j] == dev->irq) - break; - if (irqlist[j] == 0) - { - printk(KERN_INFO "proteon.c: Illegal IRQ %d specified\n", - dev->irq); - goto out3; - } - if (request_irq(dev->irq, tms380tr_interrupt, 0, - cardname, dev)) - { - printk(KERN_INFO "proteon.c: Selected IRQ %d not available\n", - dev->irq); - goto out3; - } - } - - if (dev->dma == 0) - { - for(j = 0; dmalist[j] != 0; j++) - { - dev->dma = dmalist[j]; - if (!request_dma(dev->dma, cardname)) - break; - } - - if(dmalist[j] == 0) - { - printk(KERN_INFO "proteon.c: AutoSelect no DMA available\n"); - goto out2; - } - } - else - { - for(j = 0; dmalist[j] != 0; j++) - if (dmalist[j] == dev->dma) - break; - if (dmalist[j] == 0) - { - printk(KERN_INFO "proteon.c: Illegal DMA %d specified\n", - dev->dma); - goto out2; - } - if (request_dma(dev->dma, cardname)) - { - printk(KERN_INFO "proteon.c: Selected DMA %d not available\n", - dev->dma); - goto out2; - } - } - - err = register_netdev(dev); - if (err) - goto out; - - printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n", - dev->name, dev->base_addr, dev->irq, dev->dma); - - return 0; -out: - free_dma(dev->dma); -out2: - free_irq(dev->irq, dev); -out3: - tmsdev_term(dev); -out4: - release_region(dev->base_addr, PROTEON_IO_EXTENT); -out5: - return err; -} - -/* - * Reads MAC address from adapter RAM, which should've read it from - * the onboard ROM. - * - * Calling this on a board that does not support it can be a very - * dangerous thing. The Madge board, for instance, will lock your - * machine hard when this is called. Luckily, its supported in a - * separate driver. --ASF - */ -static void proteon_read_eeprom(struct net_device *dev) -{ - int i; - - /* Address: 0000:0000 */ - proteon_sifwritew(dev, 0, SIFADX); - proteon_sifwritew(dev, 0, SIFADR); - - /* Read six byte MAC address data */ - dev->addr_len = 6; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = proteon_sifreadw(dev, SIFINC) >> 8; -} - -static unsigned short proteon_setnselout_pins(struct net_device *dev) -{ - return 0; -} - -static int proteon_open(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned short val = 0; - int i; - - /* Proteon reset sequence */ - outb(0, dev->base_addr + 0x11); - mdelay(20); - outb(0x04, dev->base_addr + 0x11); - mdelay(20); - outb(0, dev->base_addr + 0x11); - mdelay(100); - - /* set control/status reg */ - val = inb(dev->base_addr + 0x11); - val |= 0x78; - val &= 0xf9; - if(tp->DataRate == SPEED_4) - val |= 0x20; - else - val &= ~0x20; - - outb(val, dev->base_addr + 0x11); - outb(0xff, dev->base_addr + 0x12); - for(i = 0; irqlist[i] != 0; i++) - { - if(irqlist[i] == dev->irq) - break; - } - val = i; - i = (7 - dev->dma) << 4; - val |= i; - outb(val, dev->base_addr + 0x13); - - return tms380tr_open(dev); -} - -#define ISATR_MAX_ADAPTERS 3 - -static int io[ISATR_MAX_ADAPTERS]; -static int irq[ISATR_MAX_ADAPTERS]; -static int dma[ISATR_MAX_ADAPTERS]; - -MODULE_LICENSE("GPL"); - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(dma, int, NULL, 0); - -static struct platform_device *proteon_dev[ISATR_MAX_ADAPTERS]; - -static struct platform_driver proteon_driver = { - .driver = { - .name = "proteon", - }, -}; - -static int __init proteon_init(void) -{ - struct net_device *dev; - struct platform_device *pdev; - int i, num = 0, err = 0; - - proteon_netdev_ops = tms380tr_netdev_ops; - proteon_netdev_ops.ndo_open = proteon_open; - proteon_netdev_ops.ndo_stop = tms380tr_close; - - err = platform_driver_register(&proteon_driver); - if (err) - return err; - - for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) { - dev = alloc_trdev(sizeof(struct net_local)); - if (!dev) - continue; - - dev->base_addr = io[i]; - dev->irq = irq[i]; - dev->dma = dma[i]; - pdev = platform_device_register_simple("proteon", - i, NULL, 0); - if (IS_ERR(pdev)) { - free_netdev(dev); - continue; - } - err = setup_card(dev, &pdev->dev); - if (!err) { - proteon_dev[i] = pdev; - platform_set_drvdata(pdev, dev); - ++num; - } else { - platform_device_unregister(pdev); - free_netdev(dev); - } - } - - printk(KERN_NOTICE "proteon.c: %d cards found.\n", num); - /* Probe for cards. */ - if (num == 0) { - printk(KERN_NOTICE "proteon.c: No cards found.\n"); - platform_driver_unregister(&proteon_driver); - return -ENODEV; - } - return 0; -} - -static void __exit proteon_cleanup(void) -{ - struct net_device *dev; - int i; - - for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) { - struct platform_device *pdev = proteon_dev[i]; - - if (!pdev) - continue; - dev = platform_get_drvdata(pdev); - unregister_netdev(dev); - release_region(dev->base_addr, PROTEON_IO_EXTENT); - free_irq(dev->irq, dev); - free_dma(dev->dma); - tmsdev_term(dev); - free_netdev(dev); - platform_set_drvdata(pdev, NULL); - platform_device_unregister(pdev); - } - platform_driver_unregister(&proteon_driver); -} - -module_init(proteon_init); -module_exit(proteon_cleanup); diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c deleted file mode 100644 index ee11e93dc30e..000000000000 --- a/drivers/net/tokenring/skisa.c +++ /dev/null @@ -1,432 +0,0 @@ -/* - * skisa.c: A network driver for SK-NET TMS380-based ISA token ring cards. - * - * Based on tmspci written 1999 by Adam Fritzler - * - * Written 2000 by Jochen Friedrich - * Dedicated to my girlfriend Steffi Bopp - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This driver module supports the following cards: - * - SysKonnect TR4/16(+) ISA (SK-4190) - * - * Maintainer(s): - * AF Adam Fritzler - * JF Jochen Friedrich jochen@scram.de - * - * Modification History: - * 14-Jan-01 JF Created - * 28-Oct-02 JF Fixed probe of card for static compilation. - * Fixed module init to not make hotplug go wild. - * 09-Nov-02 JF Fixed early bail out on out of memory - * situations if multiple cards are found. - * Cleaned up some unnecessary console SPAM. - * 09-Dec-02 JF Fixed module reference counting. - * 02-Jan-03 JF Renamed to skisa.c - * - */ -static const char version[] = "skisa.c: v1.03 09/12/2002 by Jochen Friedrich\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> -#include <linux/platform_device.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/pci.h> -#include <asm/dma.h> - -#include "tms380tr.h" - -#define SK_ISA_IO_EXTENT 32 - -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int portlist[] __initdata = { - 0x0A20, 0x1A20, 0x0B20, 0x1B20, 0x0980, 0x1980, 0x0900, 0x1900,// SK - 0 -}; - -/* A zero-terminated list of IRQs to be probed. - * Used again after initial probe for sktr_chipset_init, called from sktr_open. - */ -static const unsigned short irqlist[] = { - 3, 5, 9, 10, 11, 12, 15, - 0 -}; - -/* A zero-terminated list of DMAs to be probed. */ -static int dmalist[] __initdata = { - 5, 6, 7, - 0 -}; - -static char isa_cardname[] = "SK NET TR 4/16 ISA\0"; -static u64 dma_mask = ISA_MAX_ADDRESS; -static int sk_isa_open(struct net_device *dev); -static void sk_isa_read_eeprom(struct net_device *dev); -static unsigned short sk_isa_setnselout_pins(struct net_device *dev); - -static unsigned short sk_isa_sifreadb(struct net_device *dev, unsigned short reg) -{ - return inb(dev->base_addr + reg); -} - -static unsigned short sk_isa_sifreadw(struct net_device *dev, unsigned short reg) -{ - return inw(dev->base_addr + reg); -} - -static void sk_isa_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg) -{ - outb(val, dev->base_addr + reg); -} - -static void sk_isa_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg) -{ - outw(val, dev->base_addr + reg); -} - - -static int __init sk_isa_probe1(struct net_device *dev, int ioaddr) -{ - unsigned char old, chk1, chk2; - - if (!request_region(ioaddr, SK_ISA_IO_EXTENT, isa_cardname)) - return -ENODEV; - - old = inb(ioaddr + SIFADR); /* Get the old SIFADR value */ - - chk1 = 0; /* Begin with check value 0 */ - do { - /* Write new SIFADR value */ - outb(chk1, ioaddr + SIFADR); - - /* Read, invert and write */ - chk2 = inb(ioaddr + SIFADD); - chk2 ^= 0x0FE; - outb(chk2, ioaddr + SIFADR); - - /* Read, invert and compare */ - chk2 = inb(ioaddr + SIFADD); - chk2 ^= 0x0FE; - - if(chk1 != chk2) { - release_region(ioaddr, SK_ISA_IO_EXTENT); - return -ENODEV; - } - - chk1 -= 2; - } while(chk1 != 0); /* Repeat 128 times (all byte values) */ - - /* Restore the SIFADR value */ - outb(old, ioaddr + SIFADR); - - dev->base_addr = ioaddr; - return 0; -} - -static struct net_device_ops sk_isa_netdev_ops __read_mostly; - -static int __init setup_card(struct net_device *dev, struct device *pdev) -{ - struct net_local *tp; - static int versionprinted; - const unsigned *port; - int j, err = 0; - - if (!dev) - return -ENOMEM; - - if (dev->base_addr) /* probe specific location */ - err = sk_isa_probe1(dev, dev->base_addr); - else { - for (port = portlist; *port; port++) { - err = sk_isa_probe1(dev, *port); - if (!err) - break; - } - } - if (err) - goto out5; - - /* At this point we have found a valid card. */ - - if (versionprinted++ == 0) - printk(KERN_DEBUG "%s", version); - - err = -EIO; - pdev->dma_mask = &dma_mask; - if (tmsdev_init(dev, pdev)) - goto out4; - - dev->base_addr &= ~3; - - sk_isa_read_eeprom(dev); - - printk(KERN_DEBUG "skisa.c: Ring Station Address: %pM\n", - dev->dev_addr); - - tp = netdev_priv(dev); - tp->setnselout = sk_isa_setnselout_pins; - - tp->sifreadb = sk_isa_sifreadb; - tp->sifreadw = sk_isa_sifreadw; - tp->sifwriteb = sk_isa_sifwriteb; - tp->sifwritew = sk_isa_sifwritew; - - memcpy(tp->ProductID, isa_cardname, PROD_ID_SIZE + 1); - - tp->tmspriv = NULL; - - dev->netdev_ops = &sk_isa_netdev_ops; - - if (dev->irq == 0) - { - for(j = 0; irqlist[j] != 0; j++) - { - dev->irq = irqlist[j]; - if (!request_irq(dev->irq, tms380tr_interrupt, 0, - isa_cardname, dev)) - break; - } - - if(irqlist[j] == 0) - { - printk(KERN_INFO "skisa.c: AutoSelect no IRQ available\n"); - goto out3; - } - } - else - { - for(j = 0; irqlist[j] != 0; j++) - if (irqlist[j] == dev->irq) - break; - if (irqlist[j] == 0) - { - printk(KERN_INFO "skisa.c: Illegal IRQ %d specified\n", - dev->irq); - goto out3; - } - if (request_irq(dev->irq, tms380tr_interrupt, 0, - isa_cardname, dev)) - { - printk(KERN_INFO "skisa.c: Selected IRQ %d not available\n", - dev->irq); - goto out3; - } - } - - if (dev->dma == 0) - { - for(j = 0; dmalist[j] != 0; j++) - { - dev->dma = dmalist[j]; - if (!request_dma(dev->dma, isa_cardname)) - break; - } - - if(dmalist[j] == 0) - { - printk(KERN_INFO "skisa.c: AutoSelect no DMA available\n"); - goto out2; - } - } - else - { - for(j = 0; dmalist[j] != 0; j++) - if (dmalist[j] == dev->dma) - break; - if (dmalist[j] == 0) - { - printk(KERN_INFO "skisa.c: Illegal DMA %d specified\n", - dev->dma); - goto out2; - } - if (request_dma(dev->dma, isa_cardname)) - { - printk(KERN_INFO "skisa.c: Selected DMA %d not available\n", - dev->dma); - goto out2; - } - } - - err = register_netdev(dev); - if (err) - goto out; - - printk(KERN_DEBUG "%s: IO: %#4lx IRQ: %d DMA: %d\n", - dev->name, dev->base_addr, dev->irq, dev->dma); - - return 0; -out: - free_dma(dev->dma); -out2: - free_irq(dev->irq, dev); -out3: - tmsdev_term(dev); -out4: - release_region(dev->base_addr, SK_ISA_IO_EXTENT); -out5: - return err; -} - -/* - * Reads MAC address from adapter RAM, which should've read it from - * the onboard ROM. - * - * Calling this on a board that does not support it can be a very - * dangerous thing. The Madge board, for instance, will lock your - * machine hard when this is called. Luckily, its supported in a - * separate driver. --ASF - */ -static void sk_isa_read_eeprom(struct net_device *dev) -{ - int i; - - /* Address: 0000:0000 */ - sk_isa_sifwritew(dev, 0, SIFADX); - sk_isa_sifwritew(dev, 0, SIFADR); - - /* Read six byte MAC address data */ - dev->addr_len = 6; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = sk_isa_sifreadw(dev, SIFINC) >> 8; -} - -static unsigned short sk_isa_setnselout_pins(struct net_device *dev) -{ - return 0; -} - -static int sk_isa_open(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned short val = 0; - unsigned short oldval; - int i; - - val = 0; - for(i = 0; irqlist[i] != 0; i++) - { - if(irqlist[i] == dev->irq) - break; - } - - val |= CYCLE_TIME << 2; - val |= i << 4; - i = dev->dma - 5; - val |= i; - if(tp->DataRate == SPEED_4) - val |= LINE_SPEED_BIT; - else - val &= ~LINE_SPEED_BIT; - oldval = sk_isa_sifreadb(dev, POSREG); - /* Leave cycle bits alone */ - oldval |= 0xf3; - val &= oldval; - sk_isa_sifwriteb(dev, val, POSREG); - - return tms380tr_open(dev); -} - -#define ISATR_MAX_ADAPTERS 3 - -static int io[ISATR_MAX_ADAPTERS]; -static int irq[ISATR_MAX_ADAPTERS]; -static int dma[ISATR_MAX_ADAPTERS]; - -MODULE_LICENSE("GPL"); - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(dma, int, NULL, 0); - -static struct platform_device *sk_isa_dev[ISATR_MAX_ADAPTERS]; - -static struct platform_driver sk_isa_driver = { - .driver = { - .name = "skisa", - }, -}; - -static int __init sk_isa_init(void) -{ - struct net_device *dev; - struct platform_device *pdev; - int i, num = 0, err = 0; - - sk_isa_netdev_ops = tms380tr_netdev_ops; - sk_isa_netdev_ops.ndo_open = sk_isa_open; - sk_isa_netdev_ops.ndo_stop = tms380tr_close; - - err = platform_driver_register(&sk_isa_driver); - if (err) - return err; - - for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) { - dev = alloc_trdev(sizeof(struct net_local)); - if (!dev) - continue; - - dev->base_addr = io[i]; - dev->irq = irq[i]; - dev->dma = dma[i]; - pdev = platform_device_register_simple("skisa", - i, NULL, 0); - if (IS_ERR(pdev)) { - free_netdev(dev); - continue; - } - err = setup_card(dev, &pdev->dev); - if (!err) { - sk_isa_dev[i] = pdev; - platform_set_drvdata(sk_isa_dev[i], dev); - ++num; - } else { - platform_device_unregister(pdev); - free_netdev(dev); - } - } - - printk(KERN_NOTICE "skisa.c: %d cards found.\n", num); - /* Probe for cards. */ - if (num == 0) { - printk(KERN_NOTICE "skisa.c: No cards found.\n"); - platform_driver_unregister(&sk_isa_driver); - return -ENODEV; - } - return 0; -} - -static void __exit sk_isa_cleanup(void) -{ - struct net_device *dev; - int i; - - for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) { - struct platform_device *pdev = sk_isa_dev[i]; - - if (!pdev) - continue; - dev = platform_get_drvdata(pdev); - unregister_netdev(dev); - release_region(dev->base_addr, SK_ISA_IO_EXTENT); - free_irq(dev->irq, dev); - free_dma(dev->dma); - tmsdev_term(dev); - free_netdev(dev); - platform_set_drvdata(pdev, NULL); - platform_device_unregister(pdev); - } - platform_driver_unregister(&sk_isa_driver); -} - -module_init(sk_isa_init); -module_exit(sk_isa_cleanup); diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c deleted file mode 100644 index cb35fb79e016..000000000000 --- a/drivers/net/tokenring/smctr.c +++ /dev/null @@ -1,5717 +0,0 @@ -/* - * smctr.c: A network driver for the SMC Token Ring Adapters. - * - * Written by Jay Schulist <jschlst@samba.org> - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This device driver works with the following SMC adapters: - * - SMC TokenCard Elite (8115T, chips 825/584) - * - SMC TokenCard Elite/A MCA (8115T/A, chips 825/594) - * - * Source(s): - * - SMC TokenCard SDK. - * - * Maintainer(s): - * JS Jay Schulist <jschlst@samba.org> - * - * Changes: - * 07102000 JS Fixed a timing problem in smctr_wait_cmd(); - * Also added a bit more discriptive error msgs. - * 07122000 JS Fixed problem with detecting a card with - * module io/irq/mem specified. - * - * To do: - * 1. Multicast support. - * - * Initial 2.5 cleanup Alan Cox <alan@lxorguk.ukuu.org.uk> 2002/10/28 - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/time.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/mca-legacy.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/trdevice.h> -#include <linux/bitops.h> -#include <linux/firmware.h> - -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/irq.h> - -#if BITS_PER_LONG == 64 -#error FIXME: driver does not support 64-bit platforms -#endif - -#include "smctr.h" /* Our Stuff */ - -static const char version[] __initdata = - KERN_INFO "smctr.c: v1.4 7/12/00 by jschlst@samba.org\n"; -static const char cardname[] = "smctr"; - - -#define SMCTR_IO_EXTENT 20 - -#ifdef CONFIG_MCA_LEGACY -static unsigned int smctr_posid = 0x6ec6; -#endif - -static int ringspeed; - -/* SMC Name of the Adapter. */ -static char smctr_name[] = "SMC TokenCard"; -static char *smctr_model = "Unknown"; - -/* Use 0 for production, 1 for verification, 2 for debug, and - * 3 for very verbose debug. - */ -#ifndef SMCTR_DEBUG -#define SMCTR_DEBUG 1 -#endif -static unsigned int smctr_debug = SMCTR_DEBUG; - -/* smctr.c prototypes and functions are arranged alphabeticly - * for clearity, maintainability and pure old fashion fun. - */ -/* A */ -static int smctr_alloc_shared_memory(struct net_device *dev); - -/* B */ -static int smctr_bypass_state(struct net_device *dev); - -/* C */ -static int smctr_checksum_firmware(struct net_device *dev); -static int __init smctr_chk_isa(struct net_device *dev); -static int smctr_chg_rx_mask(struct net_device *dev); -static int smctr_clear_int(struct net_device *dev); -static int smctr_clear_trc_reset(int ioaddr); -static int smctr_close(struct net_device *dev); - -/* D */ -static int smctr_decode_firmware(struct net_device *dev, - const struct firmware *fw); -static int smctr_disable_16bit(struct net_device *dev); -static int smctr_disable_adapter_ctrl_store(struct net_device *dev); -static int smctr_disable_bic_int(struct net_device *dev); - -/* E */ -static int smctr_enable_16bit(struct net_device *dev); -static int smctr_enable_adapter_ctrl_store(struct net_device *dev); -static int smctr_enable_adapter_ram(struct net_device *dev); -static int smctr_enable_bic_int(struct net_device *dev); - -/* G */ -static int __init smctr_get_boardid(struct net_device *dev, int mca); -static int smctr_get_group_address(struct net_device *dev); -static int smctr_get_functional_address(struct net_device *dev); -static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev); -static int smctr_get_physical_drop_number(struct net_device *dev); -static __u8 *smctr_get_rx_pointer(struct net_device *dev, short queue); -static int smctr_get_station_id(struct net_device *dev); -static FCBlock *smctr_get_tx_fcb(struct net_device *dev, __u16 queue, - __u16 bytes_count); -static int smctr_get_upstream_neighbor_addr(struct net_device *dev); - -/* H */ -static int smctr_hardware_send_packet(struct net_device *dev, - struct net_local *tp); -/* I */ -static int smctr_init_acbs(struct net_device *dev); -static int smctr_init_adapter(struct net_device *dev); -static int smctr_init_card_real(struct net_device *dev); -static int smctr_init_rx_bdbs(struct net_device *dev); -static int smctr_init_rx_fcbs(struct net_device *dev); -static int smctr_init_shared_memory(struct net_device *dev); -static int smctr_init_tx_bdbs(struct net_device *dev); -static int smctr_init_tx_fcbs(struct net_device *dev); -static int smctr_internal_self_test(struct net_device *dev); -static irqreturn_t smctr_interrupt(int irq, void *dev_id); -static int smctr_issue_enable_int_cmd(struct net_device *dev, - __u16 interrupt_enable_mask); -static int smctr_issue_int_ack(struct net_device *dev, __u16 iack_code, - __u16 ibits); -static int smctr_issue_init_timers_cmd(struct net_device *dev); -static int smctr_issue_init_txrx_cmd(struct net_device *dev); -static int smctr_issue_insert_cmd(struct net_device *dev); -static int smctr_issue_read_ring_status_cmd(struct net_device *dev); -static int smctr_issue_read_word_cmd(struct net_device *dev, __u16 aword_cnt); -static int smctr_issue_remove_cmd(struct net_device *dev); -static int smctr_issue_resume_acb_cmd(struct net_device *dev); -static int smctr_issue_resume_rx_bdb_cmd(struct net_device *dev, __u16 queue); -static int smctr_issue_resume_rx_fcb_cmd(struct net_device *dev, __u16 queue); -static int smctr_issue_resume_tx_fcb_cmd(struct net_device *dev, __u16 queue); -static int smctr_issue_test_internal_rom_cmd(struct net_device *dev); -static int smctr_issue_test_hic_cmd(struct net_device *dev); -static int smctr_issue_test_mac_reg_cmd(struct net_device *dev); -static int smctr_issue_trc_loopback_cmd(struct net_device *dev); -static int smctr_issue_tri_loopback_cmd(struct net_device *dev); -static int smctr_issue_write_byte_cmd(struct net_device *dev, - short aword_cnt, void *byte); -static int smctr_issue_write_word_cmd(struct net_device *dev, - short aword_cnt, void *word); - -/* J */ -static int smctr_join_complete_state(struct net_device *dev); - -/* L */ -static int smctr_link_tx_fcbs_to_bdbs(struct net_device *dev); -static int smctr_load_firmware(struct net_device *dev); -static int smctr_load_node_addr(struct net_device *dev); -static int smctr_lobe_media_test(struct net_device *dev); -static int smctr_lobe_media_test_cmd(struct net_device *dev); -static int smctr_lobe_media_test_state(struct net_device *dev); - -/* M */ -static int smctr_make_8025_hdr(struct net_device *dev, - MAC_HEADER *rmf, MAC_HEADER *tmf, __u16 ac_fc); -static int smctr_make_access_pri(struct net_device *dev, - MAC_SUB_VECTOR *tsv); -static int smctr_make_addr_mod(struct net_device *dev, MAC_SUB_VECTOR *tsv); -static int smctr_make_auth_funct_class(struct net_device *dev, - MAC_SUB_VECTOR *tsv); -static int smctr_make_corr(struct net_device *dev, - MAC_SUB_VECTOR *tsv, __u16 correlator); -static int smctr_make_funct_addr(struct net_device *dev, - MAC_SUB_VECTOR *tsv); -static int smctr_make_group_addr(struct net_device *dev, - MAC_SUB_VECTOR *tsv); -static int smctr_make_phy_drop_num(struct net_device *dev, - MAC_SUB_VECTOR *tsv); -static int smctr_make_product_id(struct net_device *dev, MAC_SUB_VECTOR *tsv); -static int smctr_make_station_id(struct net_device *dev, MAC_SUB_VECTOR *tsv); -static int smctr_make_ring_station_status(struct net_device *dev, - MAC_SUB_VECTOR *tsv); -static int smctr_make_ring_station_version(struct net_device *dev, - MAC_SUB_VECTOR *tsv); -static int smctr_make_tx_status_code(struct net_device *dev, - MAC_SUB_VECTOR *tsv, __u16 tx_fstatus); -static int smctr_make_upstream_neighbor_addr(struct net_device *dev, - MAC_SUB_VECTOR *tsv); -static int smctr_make_wrap_data(struct net_device *dev, - MAC_SUB_VECTOR *tsv); - -/* O */ -static int smctr_open(struct net_device *dev); -static int smctr_open_tr(struct net_device *dev); - -/* P */ -struct net_device *smctr_probe(int unit); -static int __init smctr_probe1(struct net_device *dev, int ioaddr); -static int smctr_process_rx_packet(MAC_HEADER *rmf, __u16 size, - struct net_device *dev, __u16 rx_status); - -/* R */ -static int smctr_ram_memory_test(struct net_device *dev); -static int smctr_rcv_chg_param(struct net_device *dev, MAC_HEADER *rmf, - __u16 *correlator); -static int smctr_rcv_init(struct net_device *dev, MAC_HEADER *rmf, - __u16 *correlator); -static int smctr_rcv_tx_forward(struct net_device *dev, MAC_HEADER *rmf); -static int smctr_rcv_rq_addr_state_attch(struct net_device *dev, - MAC_HEADER *rmf, __u16 *correlator); -static int smctr_rcv_unknown(struct net_device *dev, MAC_HEADER *rmf, - __u16 *correlator); -static int smctr_reset_adapter(struct net_device *dev); -static int smctr_restart_tx_chain(struct net_device *dev, short queue); -static int smctr_ring_status_chg(struct net_device *dev); -static int smctr_rx_frame(struct net_device *dev); - -/* S */ -static int smctr_send_dat(struct net_device *dev); -static netdev_tx_t smctr_send_packet(struct sk_buff *skb, - struct net_device *dev); -static int smctr_send_lobe_media_test(struct net_device *dev); -static int smctr_send_rpt_addr(struct net_device *dev, MAC_HEADER *rmf, - __u16 correlator); -static int smctr_send_rpt_attch(struct net_device *dev, MAC_HEADER *rmf, - __u16 correlator); -static int smctr_send_rpt_state(struct net_device *dev, MAC_HEADER *rmf, - __u16 correlator); -static int smctr_send_rpt_tx_forward(struct net_device *dev, - MAC_HEADER *rmf, __u16 tx_fstatus); -static int smctr_send_rsp(struct net_device *dev, MAC_HEADER *rmf, - __u16 rcode, __u16 correlator); -static int smctr_send_rq_init(struct net_device *dev); -static int smctr_send_tx_forward(struct net_device *dev, MAC_HEADER *rmf, - __u16 *tx_fstatus); -static int smctr_set_auth_access_pri(struct net_device *dev, - MAC_SUB_VECTOR *rsv); -static int smctr_set_auth_funct_class(struct net_device *dev, - MAC_SUB_VECTOR *rsv); -static int smctr_set_corr(struct net_device *dev, MAC_SUB_VECTOR *rsv, - __u16 *correlator); -static int smctr_set_error_timer_value(struct net_device *dev, - MAC_SUB_VECTOR *rsv); -static int smctr_set_frame_forward(struct net_device *dev, - MAC_SUB_VECTOR *rsv, __u8 dc_sc); -static int smctr_set_local_ring_num(struct net_device *dev, - MAC_SUB_VECTOR *rsv); -static unsigned short smctr_set_ctrl_attention(struct net_device *dev); -static void smctr_set_multicast_list(struct net_device *dev); -static int smctr_set_page(struct net_device *dev, __u8 *buf); -static int smctr_set_phy_drop(struct net_device *dev, - MAC_SUB_VECTOR *rsv); -static int smctr_set_ring_speed(struct net_device *dev); -static int smctr_set_rx_look_ahead(struct net_device *dev); -static int smctr_set_trc_reset(int ioaddr); -static int smctr_setup_single_cmd(struct net_device *dev, - __u16 command, __u16 subcommand); -static int smctr_setup_single_cmd_w_data(struct net_device *dev, - __u16 command, __u16 subcommand); -static char *smctr_malloc(struct net_device *dev, __u16 size); -static int smctr_status_chg(struct net_device *dev); - -/* T */ -static void smctr_timeout(struct net_device *dev); -static int smctr_trc_send_packet(struct net_device *dev, FCBlock *fcb, - __u16 queue); -static __u16 smctr_tx_complete(struct net_device *dev, __u16 queue); -static unsigned short smctr_tx_move_frame(struct net_device *dev, - struct sk_buff *skb, __u8 *pbuff, unsigned int bytes); - -/* U */ -static int smctr_update_err_stats(struct net_device *dev); -static int smctr_update_rx_chain(struct net_device *dev, __u16 queue); -static int smctr_update_tx_chain(struct net_device *dev, FCBlock *fcb, - __u16 queue); - -/* W */ -static int smctr_wait_cmd(struct net_device *dev); -static int smctr_wait_while_cbusy(struct net_device *dev); - -#define TO_256_BYTE_BOUNDRY(X) (((X + 0xff) & 0xff00) - X) -#define TO_PARAGRAPH_BOUNDRY(X) (((X + 0x0f) & 0xfff0) - X) -#define PARAGRAPH_BOUNDRY(X) smctr_malloc(dev, TO_PARAGRAPH_BOUNDRY(X)) - -/* Allocate Adapter Shared Memory. - * IMPORTANT NOTE: Any changes to this function MUST be mirrored in the - * function "get_num_rx_bdbs" below!!! - * - * Order of memory allocation: - * - * 0. Initial System Configuration Block Pointer - * 1. System Configuration Block - * 2. System Control Block - * 3. Action Command Block - * 4. Interrupt Status Block - * - * 5. MAC TX FCB'S - * 6. NON-MAC TX FCB'S - * 7. MAC TX BDB'S - * 8. NON-MAC TX BDB'S - * 9. MAC RX FCB'S - * 10. NON-MAC RX FCB'S - * 11. MAC RX BDB'S - * 12. NON-MAC RX BDB'S - * 13. MAC TX Data Buffer( 1, 256 byte buffer) - * 14. MAC RX Data Buffer( 1, 256 byte buffer) - * - * 15. NON-MAC TX Data Buffer - * 16. NON-MAC RX Data Buffer - */ -static int smctr_alloc_shared_memory(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_alloc_shared_memory\n", dev->name); - - /* Allocate initial System Control Block pointer. - * This pointer is located in the last page, last offset - 4. - */ - tp->iscpb_ptr = (ISCPBlock *)(tp->ram_access + ((__u32)64 * 0x400) - - (long)ISCP_BLOCK_SIZE); - - /* Allocate System Control Blocks. */ - tp->scgb_ptr = (SCGBlock *)smctr_malloc(dev, sizeof(SCGBlock)); - PARAGRAPH_BOUNDRY(tp->sh_mem_used); - - tp->sclb_ptr = (SCLBlock *)smctr_malloc(dev, sizeof(SCLBlock)); - PARAGRAPH_BOUNDRY(tp->sh_mem_used); - - tp->acb_head = (ACBlock *)smctr_malloc(dev, - sizeof(ACBlock)*tp->num_acbs); - PARAGRAPH_BOUNDRY(tp->sh_mem_used); - - tp->isb_ptr = (ISBlock *)smctr_malloc(dev, sizeof(ISBlock)); - PARAGRAPH_BOUNDRY(tp->sh_mem_used); - - tp->misc_command_data = (__u16 *)smctr_malloc(dev, MISC_DATA_SIZE); - PARAGRAPH_BOUNDRY(tp->sh_mem_used); - - /* Allocate transmit FCBs. */ - tp->tx_fcb_head[MAC_QUEUE] = (FCBlock *)smctr_malloc(dev, - sizeof(FCBlock) * tp->num_tx_fcbs[MAC_QUEUE]); - - tp->tx_fcb_head[NON_MAC_QUEUE] = (FCBlock *)smctr_malloc(dev, - sizeof(FCBlock) * tp->num_tx_fcbs[NON_MAC_QUEUE]); - - tp->tx_fcb_head[BUG_QUEUE] = (FCBlock *)smctr_malloc(dev, - sizeof(FCBlock) * tp->num_tx_fcbs[BUG_QUEUE]); - - /* Allocate transmit BDBs. */ - tp->tx_bdb_head[MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, - sizeof(BDBlock) * tp->num_tx_bdbs[MAC_QUEUE]); - - tp->tx_bdb_head[NON_MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, - sizeof(BDBlock) * tp->num_tx_bdbs[NON_MAC_QUEUE]); - - tp->tx_bdb_head[BUG_QUEUE] = (BDBlock *)smctr_malloc(dev, - sizeof(BDBlock) * tp->num_tx_bdbs[BUG_QUEUE]); - - /* Allocate receive FCBs. */ - tp->rx_fcb_head[MAC_QUEUE] = (FCBlock *)smctr_malloc(dev, - sizeof(FCBlock) * tp->num_rx_fcbs[MAC_QUEUE]); - - tp->rx_fcb_head[NON_MAC_QUEUE] = (FCBlock *)smctr_malloc(dev, - sizeof(FCBlock) * tp->num_rx_fcbs[NON_MAC_QUEUE]); - - /* Allocate receive BDBs. */ - tp->rx_bdb_head[MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, - sizeof(BDBlock) * tp->num_rx_bdbs[MAC_QUEUE]); - - tp->rx_bdb_end[MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, 0); - - tp->rx_bdb_head[NON_MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, - sizeof(BDBlock) * tp->num_rx_bdbs[NON_MAC_QUEUE]); - - tp->rx_bdb_end[NON_MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, 0); - - /* Allocate MAC transmit buffers. - * MAC Tx Buffers doen't have to be on an ODD Boundary. - */ - tp->tx_buff_head[MAC_QUEUE] - = (__u16 *)smctr_malloc(dev, tp->tx_buff_size[MAC_QUEUE]); - tp->tx_buff_curr[MAC_QUEUE] = tp->tx_buff_head[MAC_QUEUE]; - tp->tx_buff_end [MAC_QUEUE] = (__u16 *)smctr_malloc(dev, 0); - - /* Allocate BUG transmit buffers. */ - tp->tx_buff_head[BUG_QUEUE] - = (__u16 *)smctr_malloc(dev, tp->tx_buff_size[BUG_QUEUE]); - tp->tx_buff_curr[BUG_QUEUE] = tp->tx_buff_head[BUG_QUEUE]; - tp->tx_buff_end[BUG_QUEUE] = (__u16 *)smctr_malloc(dev, 0); - - /* Allocate MAC receive data buffers. - * MAC Rx buffer doesn't have to be on a 256 byte boundary. - */ - tp->rx_buff_head[MAC_QUEUE] = (__u16 *)smctr_malloc(dev, - RX_DATA_BUFFER_SIZE * tp->num_rx_bdbs[MAC_QUEUE]); - tp->rx_buff_end[MAC_QUEUE] = (__u16 *)smctr_malloc(dev, 0); - - /* Allocate Non-MAC transmit buffers. - * ?? For maximum Netware performance, put Tx Buffers on - * ODD Boundary and then restore malloc to Even Boundrys. - */ - smctr_malloc(dev, 1L); - tp->tx_buff_head[NON_MAC_QUEUE] - = (__u16 *)smctr_malloc(dev, tp->tx_buff_size[NON_MAC_QUEUE]); - tp->tx_buff_curr[NON_MAC_QUEUE] = tp->tx_buff_head[NON_MAC_QUEUE]; - tp->tx_buff_end [NON_MAC_QUEUE] = (__u16 *)smctr_malloc(dev, 0); - smctr_malloc(dev, 1L); - - /* Allocate Non-MAC receive data buffers. - * To guarantee a minimum of 256 contiguous memory to - * UM_Receive_Packet's lookahead pointer, before a page - * change or ring end is encountered, place each rx buffer on - * a 256 byte boundary. - */ - smctr_malloc(dev, TO_256_BYTE_BOUNDRY(tp->sh_mem_used)); - tp->rx_buff_head[NON_MAC_QUEUE] = (__u16 *)smctr_malloc(dev, - RX_DATA_BUFFER_SIZE * tp->num_rx_bdbs[NON_MAC_QUEUE]); - tp->rx_buff_end[NON_MAC_QUEUE] = (__u16 *)smctr_malloc(dev, 0); - - return 0; -} - -/* Enter Bypass state. */ -static int smctr_bypass_state(struct net_device *dev) -{ - int err; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_bypass_state\n", dev->name); - - err = smctr_setup_single_cmd(dev, ACB_CMD_CHANGE_JOIN_STATE, JS_BYPASS_STATE); - - return err; -} - -static int smctr_checksum_firmware(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - __u16 i, checksum = 0; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_checksum_firmware\n", dev->name); - - smctr_enable_adapter_ctrl_store(dev); - - for(i = 0; i < CS_RAM_SIZE; i += 2) - checksum += *((__u16 *)(tp->ram_access + i)); - - tp->microcode_version = *(__u16 *)(tp->ram_access - + CS_RAM_VERSION_OFFSET); - tp->microcode_version >>= 8; - - smctr_disable_adapter_ctrl_store(dev); - - if(checksum) - return checksum; - - return 0; -} - -static int __init smctr_chk_mca(struct net_device *dev) -{ -#ifdef CONFIG_MCA_LEGACY - struct net_local *tp = netdev_priv(dev); - int current_slot; - __u8 r1, r2, r3, r4, r5; - - current_slot = mca_find_unused_adapter(smctr_posid, 0); - if(current_slot == MCA_NOTFOUND) - return -ENODEV; - - mca_set_adapter_name(current_slot, smctr_name); - mca_mark_as_used(current_slot); - tp->slot_num = current_slot; - - r1 = mca_read_stored_pos(tp->slot_num, 2); - r2 = mca_read_stored_pos(tp->slot_num, 3); - - if(tp->slot_num) - outb(CNFG_POS_CONTROL_REG, (__u8)((tp->slot_num - 1) | CNFG_SLOT_ENABLE_BIT)); - else - outb(CNFG_POS_CONTROL_REG, (__u8)((tp->slot_num) | CNFG_SLOT_ENABLE_BIT)); - - r1 = inb(CNFG_POS_REG1); - r2 = inb(CNFG_POS_REG0); - - tp->bic_type = BIC_594_CHIP; - - /* IO */ - r2 = mca_read_stored_pos(tp->slot_num, 2); - r2 &= 0xF0; - dev->base_addr = ((__u16)r2 << 8) + (__u16)0x800; - request_region(dev->base_addr, SMCTR_IO_EXTENT, smctr_name); - - /* IRQ */ - r5 = mca_read_stored_pos(tp->slot_num, 5); - r5 &= 0xC; - switch(r5) - { - case 0: - dev->irq = 3; - break; - - case 0x4: - dev->irq = 4; - break; - - case 0x8: - dev->irq = 10; - break; - - default: - dev->irq = 15; - break; - } - if (request_irq(dev->irq, smctr_interrupt, IRQF_SHARED, smctr_name, dev)) { - release_region(dev->base_addr, SMCTR_IO_EXTENT); - return -ENODEV; - } - - /* Get RAM base */ - r3 = mca_read_stored_pos(tp->slot_num, 3); - tp->ram_base = ((__u32)(r3 & 0x7) << 13) + 0x0C0000; - if (r3 & 0x8) - tp->ram_base += 0x010000; - if (r3 & 0x80) - tp->ram_base += 0xF00000; - - /* Get Ram Size */ - r3 &= 0x30; - r3 >>= 4; - - tp->ram_usable = (__u16)CNFG_SIZE_8KB << r3; - tp->ram_size = (__u16)CNFG_SIZE_64KB; - tp->board_id |= TOKEN_MEDIA; - - r4 = mca_read_stored_pos(tp->slot_num, 4); - tp->rom_base = ((__u32)(r4 & 0x7) << 13) + 0x0C0000; - if (r4 & 0x8) - tp->rom_base += 0x010000; - - /* Get ROM size. */ - r4 >>= 4; - switch (r4) { - case 0: - tp->rom_size = CNFG_SIZE_8KB; - break; - case 1: - tp->rom_size = CNFG_SIZE_16KB; - break; - case 2: - tp->rom_size = CNFG_SIZE_32KB; - break; - default: - tp->rom_size = ROM_DISABLE; - } - - /* Get Media Type. */ - r5 = mca_read_stored_pos(tp->slot_num, 5); - r5 &= CNFG_MEDIA_TYPE_MASK; - switch(r5) - { - case (0): - tp->media_type = MEDIA_STP_4; - break; - - case (1): - tp->media_type = MEDIA_STP_16; - break; - - case (3): - tp->media_type = MEDIA_UTP_16; - break; - - default: - tp->media_type = MEDIA_UTP_4; - break; - } - tp->media_menu = 14; - - r2 = mca_read_stored_pos(tp->slot_num, 2); - if(!(r2 & 0x02)) - tp->mode_bits |= EARLY_TOKEN_REL; - - /* Disable slot */ - outb(CNFG_POS_CONTROL_REG, 0); - - tp->board_id = smctr_get_boardid(dev, 1); - switch(tp->board_id & 0xffff) - { - case WD8115TA: - smctr_model = "8115T/A"; - break; - - case WD8115T: - if(tp->extra_info & CHIP_REV_MASK) - smctr_model = "8115T rev XE"; - else - smctr_model = "8115T rev XD"; - break; - - default: - smctr_model = "Unknown"; - break; - } - - return 0; -#else - return -1; -#endif /* CONFIG_MCA_LEGACY */ -} - -static int smctr_chg_rx_mask(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err = 0; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_chg_rx_mask\n", dev->name); - - smctr_enable_16bit(dev); - smctr_set_page(dev, (__u8 *)tp->ram_access); - - if(tp->mode_bits & LOOPING_MODE_MASK) - tp->config_word0 |= RX_OWN_BIT; - else - tp->config_word0 &= ~RX_OWN_BIT; - - if(tp->receive_mask & PROMISCUOUS_MODE) - tp->config_word0 |= PROMISCUOUS_BIT; - else - tp->config_word0 &= ~PROMISCUOUS_BIT; - - if(tp->receive_mask & ACCEPT_ERR_PACKETS) - tp->config_word0 |= SAVBAD_BIT; - else - tp->config_word0 &= ~SAVBAD_BIT; - - if(tp->receive_mask & ACCEPT_ATT_MAC_FRAMES) - tp->config_word0 |= RXATMAC; - else - tp->config_word0 &= ~RXATMAC; - - if(tp->receive_mask & ACCEPT_MULTI_PROM) - tp->config_word1 |= MULTICAST_ADDRESS_BIT; - else - tp->config_word1 &= ~MULTICAST_ADDRESS_BIT; - - if(tp->receive_mask & ACCEPT_SOURCE_ROUTING_SPANNING) - tp->config_word1 |= SOURCE_ROUTING_SPANNING_BITS; - else - { - if(tp->receive_mask & ACCEPT_SOURCE_ROUTING) - tp->config_word1 |= SOURCE_ROUTING_EXPLORER_BIT; - else - tp->config_word1 &= ~SOURCE_ROUTING_SPANNING_BITS; - } - - if((err = smctr_issue_write_word_cmd(dev, RW_CONFIG_REGISTER_0, - &tp->config_word0))) - { - return err; - } - - if((err = smctr_issue_write_word_cmd(dev, RW_CONFIG_REGISTER_1, - &tp->config_word1))) - { - return err; - } - - smctr_disable_16bit(dev); - - return 0; -} - -static int smctr_clear_int(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - outb((tp->trc_mask | CSR_CLRTINT), dev->base_addr + CSR); - - return 0; -} - -static int smctr_clear_trc_reset(int ioaddr) -{ - __u8 r; - - r = inb(ioaddr + MSR); - outb(~MSR_RST & r, ioaddr + MSR); - - return 0; -} - -/* - * The inverse routine to smctr_open(). - */ -static int smctr_close(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - struct sk_buff *skb; - int err; - - netif_stop_queue(dev); - - tp->cleanup = 1; - - /* Check to see if adapter is already in a closed state. */ - if(tp->status != OPEN) - return 0; - - smctr_enable_16bit(dev); - smctr_set_page(dev, (__u8 *)tp->ram_access); - - if((err = smctr_issue_remove_cmd(dev))) - { - smctr_disable_16bit(dev); - return err; - } - - for(;;) - { - skb = skb_dequeue(&tp->SendSkbQueue); - if(skb == NULL) - break; - tp->QueueSkb++; - dev_kfree_skb(skb); - } - - - return 0; -} - -static int smctr_decode_firmware(struct net_device *dev, - const struct firmware *fw) -{ - struct net_local *tp = netdev_priv(dev); - short bit = 0x80, shift = 12; - DECODE_TREE_NODE *tree; - short branch, tsize; - __u16 buff = 0; - long weight; - __u8 *ucode; - __u16 *mem; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_decode_firmware\n", dev->name); - - weight = *(long *)(fw->data + WEIGHT_OFFSET); - tsize = *(__u8 *)(fw->data + TREE_SIZE_OFFSET); - tree = (DECODE_TREE_NODE *)(fw->data + TREE_OFFSET); - ucode = (__u8 *)(fw->data + TREE_OFFSET - + (tsize * sizeof(DECODE_TREE_NODE))); - mem = (__u16 *)(tp->ram_access); - - while(weight) - { - branch = ROOT; - while((tree + branch)->tag != LEAF && weight) - { - branch = *ucode & bit ? (tree + branch)->llink - : (tree + branch)->rlink; - - bit >>= 1; - weight--; - - if(bit == 0) - { - bit = 0x80; - ucode++; - } - } - - buff |= (tree + branch)->info << shift; - shift -= 4; - - if(shift < 0) - { - *(mem++) = SWAP_BYTES(buff); - buff = 0; - shift = 12; - } - } - - /* The following assumes the Control Store Memory has - * been initialized to zero. If the last partial word - * is zero, it will not be written. - */ - if(buff) - *(mem++) = SWAP_BYTES(buff); - - return 0; -} - -static int smctr_disable_16bit(struct net_device *dev) -{ - return 0; -} - -/* - * On Exit, Adapter is: - * 1. TRC is in a reset state and un-initialized. - * 2. Adapter memory is enabled. - * 3. Control Store memory is out of context (-WCSS is 1). - */ -static int smctr_disable_adapter_ctrl_store(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_disable_adapter_ctrl_store\n", dev->name); - - tp->trc_mask |= CSR_WCSS; - outb(tp->trc_mask, ioaddr + CSR); - - return 0; -} - -static int smctr_disable_bic_int(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - tp->trc_mask = CSR_MSK_ALL | CSR_MSKCBUSY - | CSR_MSKTINT | CSR_WCSS; - outb(tp->trc_mask, ioaddr + CSR); - - return 0; -} - -static int smctr_enable_16bit(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - __u8 r; - - if(tp->adapter_bus == BUS_ISA16_TYPE) - { - r = inb(dev->base_addr + LAAR); - outb((r | LAAR_MEM16ENB), dev->base_addr + LAAR); - } - - return 0; -} - -/* - * To enable the adapter control store memory: - * 1. Adapter must be in a RESET state. - * 2. Adapter memory must be enabled. - * 3. Control Store Memory is in context (-WCSS is 0). - */ -static int smctr_enable_adapter_ctrl_store(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_enable_adapter_ctrl_store\n", dev->name); - - smctr_set_trc_reset(ioaddr); - smctr_enable_adapter_ram(dev); - - tp->trc_mask &= ~CSR_WCSS; - outb(tp->trc_mask, ioaddr + CSR); - - return 0; -} - -static int smctr_enable_adapter_ram(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - __u8 r; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_enable_adapter_ram\n", dev->name); - - r = inb(ioaddr + MSR); - outb(MSR_MEMB | r, ioaddr + MSR); - - return 0; -} - -static int smctr_enable_bic_int(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int ioaddr = dev->base_addr; - __u8 r; - - switch(tp->bic_type) - { - case (BIC_584_CHIP): - tp->trc_mask = CSR_MSKCBUSY | CSR_WCSS; - outb(tp->trc_mask, ioaddr + CSR); - r = inb(ioaddr + IRR); - outb(r | IRR_IEN, ioaddr + IRR); - break; - - case (BIC_594_CHIP): - tp->trc_mask = CSR_MSKCBUSY | CSR_WCSS; - outb(tp->trc_mask, ioaddr + CSR); - r = inb(ioaddr + IMCCR); - outb(r | IMCCR_EIL, ioaddr + IMCCR); - break; - } - - return 0; -} - -static int __init smctr_chk_isa(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int ioaddr = dev->base_addr; - __u8 r1, r2, b, chksum = 0; - __u16 r; - int i; - int err = -ENODEV; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_chk_isa %#4x\n", dev->name, ioaddr); - - if((ioaddr & 0x1F) != 0) - goto out; - - /* Grab the region so that no one else tries to probe our ioports. */ - if (!request_region(ioaddr, SMCTR_IO_EXTENT, smctr_name)) { - err = -EBUSY; - goto out; - } - - /* Checksum SMC node address */ - for(i = 0; i < 8; i++) - { - b = inb(ioaddr + LAR0 + i); - chksum += b; - } - - if (chksum != NODE_ADDR_CKSUM) - goto out2; - - b = inb(ioaddr + BDID); - if(b != BRD_ID_8115T) - { - printk(KERN_ERR "%s: The adapter found is not supported\n", dev->name); - goto out2; - } - - /* Check for 8115T Board ID */ - r2 = 0; - for(r = 0; r < 8; r++) - { - r1 = inb(ioaddr + 0x8 + r); - r2 += r1; - } - - /* value of RegF adds up the sum to 0xFF */ - if((r2 != 0xFF) && (r2 != 0xEE)) - goto out2; - - /* Get adapter ID */ - tp->board_id = smctr_get_boardid(dev, 0); - switch(tp->board_id & 0xffff) - { - case WD8115TA: - smctr_model = "8115T/A"; - break; - - case WD8115T: - if(tp->extra_info & CHIP_REV_MASK) - smctr_model = "8115T rev XE"; - else - smctr_model = "8115T rev XD"; - break; - - default: - smctr_model = "Unknown"; - break; - } - - /* Store BIC type. */ - tp->bic_type = BIC_584_CHIP; - tp->nic_type = NIC_825_CHIP; - - /* Copy Ram Size */ - tp->ram_usable = CNFG_SIZE_16KB; - tp->ram_size = CNFG_SIZE_64KB; - - /* Get 58x Ram Base */ - r1 = inb(ioaddr); - r1 &= 0x3F; - - r2 = inb(ioaddr + CNFG_LAAR_584); - r2 &= CNFG_LAAR_MASK; - r2 <<= 3; - r2 |= ((r1 & 0x38) >> 3); - - tp->ram_base = ((__u32)r2 << 16) + (((__u32)(r1 & 0x7)) << 13); - - /* Get 584 Irq */ - r1 = 0; - r1 = inb(ioaddr + CNFG_ICR_583); - r1 &= CNFG_ICR_IR2_584; - - r2 = inb(ioaddr + CNFG_IRR_583); - r2 &= CNFG_IRR_IRQS; /* 0x60 */ - r2 >>= 5; - - switch(r2) - { - case 0: - if(r1 == 0) - dev->irq = 2; - else - dev->irq = 10; - break; - - case 1: - if(r1 == 0) - dev->irq = 3; - else - dev->irq = 11; - break; - - case 2: - if(r1 == 0) - { - if(tp->extra_info & ALTERNATE_IRQ_BIT) - dev->irq = 5; - else - dev->irq = 4; - } - else - dev->irq = 15; - break; - - case 3: - if(r1 == 0) - dev->irq = 7; - else - dev->irq = 4; - break; - - default: - printk(KERN_ERR "%s: No IRQ found aborting\n", dev->name); - goto out2; - } - - if (request_irq(dev->irq, smctr_interrupt, IRQF_SHARED, smctr_name, dev)) - goto out2; - - /* Get 58x Rom Base */ - r1 = inb(ioaddr + CNFG_BIO_583); - r1 &= 0x3E; - r1 |= 0x40; - - tp->rom_base = (__u32)r1 << 13; - - /* Get 58x Rom Size */ - r1 = inb(ioaddr + CNFG_BIO_583); - r1 &= 0xC0; - if(r1 == 0) - tp->rom_size = ROM_DISABLE; - else - { - r1 >>= 6; - tp->rom_size = (__u16)CNFG_SIZE_8KB << r1; - } - - /* Get 58x Boot Status */ - r1 = inb(ioaddr + CNFG_GP2); - - tp->mode_bits &= (~BOOT_STATUS_MASK); - - if(r1 & CNFG_GP2_BOOT_NIBBLE) - tp->mode_bits |= BOOT_TYPE_1; - - /* Get 58x Zero Wait State */ - tp->mode_bits &= (~ZERO_WAIT_STATE_MASK); - - r1 = inb(ioaddr + CNFG_IRR_583); - - if(r1 & CNFG_IRR_ZWS) - tp->mode_bits |= ZERO_WAIT_STATE_8_BIT; - - if(tp->board_id & BOARD_16BIT) - { - r1 = inb(ioaddr + CNFG_LAAR_584); - - if(r1 & CNFG_LAAR_ZWS) - tp->mode_bits |= ZERO_WAIT_STATE_16_BIT; - } - - /* Get 584 Media Menu */ - tp->media_menu = 14; - r1 = inb(ioaddr + CNFG_IRR_583); - - tp->mode_bits &= 0xf8ff; /* (~CNFG_INTERFACE_TYPE_MASK) */ - if((tp->board_id & TOKEN_MEDIA) == TOKEN_MEDIA) - { - /* Get Advanced Features */ - if(((r1 & 0x6) >> 1) == 0x3) - tp->media_type |= MEDIA_UTP_16; - else - { - if(((r1 & 0x6) >> 1) == 0x2) - tp->media_type |= MEDIA_STP_16; - else - { - if(((r1 & 0x6) >> 1) == 0x1) - tp->media_type |= MEDIA_UTP_4; - - else - tp->media_type |= MEDIA_STP_4; - } - } - - r1 = inb(ioaddr + CNFG_GP2); - if(!(r1 & 0x2) ) /* GP2_ETRD */ - tp->mode_bits |= EARLY_TOKEN_REL; - - /* see if the chip is corrupted - if(smctr_read_584_chksum(ioaddr)) - { - printk(KERN_ERR "%s: EEPROM Checksum Failure\n", dev->name); - free_irq(dev->irq, dev); - goto out2; - } - */ - } - - return 0; - -out2: - release_region(ioaddr, SMCTR_IO_EXTENT); -out: - return err; -} - -static int __init smctr_get_boardid(struct net_device *dev, int mca) -{ - struct net_local *tp = netdev_priv(dev); - int ioaddr = dev->base_addr; - __u8 r, r1, IdByte; - __u16 BoardIdMask; - - tp->board_id = BoardIdMask = 0; - - if(mca) - { - BoardIdMask |= (MICROCHANNEL+INTERFACE_CHIP+TOKEN_MEDIA+PAGED_RAM+BOARD_16BIT); - tp->extra_info |= (INTERFACE_594_CHIP+RAM_SIZE_64K+NIC_825_BIT+ALTERNATE_IRQ_BIT+SLOT_16BIT); - } - else - { - BoardIdMask|=(INTERFACE_CHIP+TOKEN_MEDIA+PAGED_RAM+BOARD_16BIT); - tp->extra_info |= (INTERFACE_584_CHIP + RAM_SIZE_64K - + NIC_825_BIT + ALTERNATE_IRQ_BIT); - } - - if(!mca) - { - r = inb(ioaddr + BID_REG_1); - r &= 0x0c; - outb(r, ioaddr + BID_REG_1); - r = inb(ioaddr + BID_REG_1); - - if(r & BID_SIXTEEN_BIT_BIT) - { - tp->extra_info |= SLOT_16BIT; - tp->adapter_bus = BUS_ISA16_TYPE; - } - else - tp->adapter_bus = BUS_ISA8_TYPE; - } - else - tp->adapter_bus = BUS_MCA_TYPE; - - /* Get Board Id Byte */ - IdByte = inb(ioaddr + BID_BOARD_ID_BYTE); - - /* if Major version > 1.0 then - * return; - */ - if(IdByte & 0xF8) - return -1; - - r1 = inb(ioaddr + BID_REG_1); - r1 &= BID_ICR_MASK; - r1 |= BID_OTHER_BIT; - - outb(r1, ioaddr + BID_REG_1); - r1 = inb(ioaddr + BID_REG_3); - - r1 &= BID_EAR_MASK; - r1 |= BID_ENGR_PAGE; - - outb(r1, ioaddr + BID_REG_3); - r1 = inb(ioaddr + BID_REG_1); - r1 &= BID_ICR_MASK; - r1 |= (BID_RLA | BID_OTHER_BIT); - - outb(r1, ioaddr + BID_REG_1); - - r1 = inb(ioaddr + BID_REG_1); - while(r1 & BID_RECALL_DONE_MASK) - r1 = inb(ioaddr + BID_REG_1); - - r = inb(ioaddr + BID_LAR_0 + BID_REG_6); - - /* clear chip rev bits */ - tp->extra_info &= ~CHIP_REV_MASK; - tp->extra_info |= ((r & BID_EEPROM_CHIP_REV_MASK) << 6); - - r1 = inb(ioaddr + BID_REG_1); - r1 &= BID_ICR_MASK; - r1 |= BID_OTHER_BIT; - - outb(r1, ioaddr + BID_REG_1); - r1 = inb(ioaddr + BID_REG_3); - - r1 &= BID_EAR_MASK; - r1 |= BID_EA6; - - outb(r1, ioaddr + BID_REG_3); - r1 = inb(ioaddr + BID_REG_1); - - r1 &= BID_ICR_MASK; - r1 |= BID_RLA; - - outb(r1, ioaddr + BID_REG_1); - r1 = inb(ioaddr + BID_REG_1); - - while(r1 & BID_RECALL_DONE_MASK) - r1 = inb(ioaddr + BID_REG_1); - - return BoardIdMask; -} - -static int smctr_get_group_address(struct net_device *dev) -{ - smctr_issue_read_word_cmd(dev, RW_INDIVIDUAL_GROUP_ADDR); - - return smctr_wait_cmd(dev); -} - -static int smctr_get_functional_address(struct net_device *dev) -{ - smctr_issue_read_word_cmd(dev, RW_FUNCTIONAL_ADDR); - - return smctr_wait_cmd(dev); -} - -/* Calculate number of Non-MAC receive BDB's and data buffers. - * This function must simulate allocateing shared memory exactly - * as the allocate_shared_memory function above. - */ -static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int mem_used = 0; - - /* Allocate System Control Blocks. */ - mem_used += sizeof(SCGBlock); - - mem_used += TO_PARAGRAPH_BOUNDRY(mem_used); - mem_used += sizeof(SCLBlock); - - mem_used += TO_PARAGRAPH_BOUNDRY(mem_used); - mem_used += sizeof(ACBlock) * tp->num_acbs; - - mem_used += TO_PARAGRAPH_BOUNDRY(mem_used); - mem_used += sizeof(ISBlock); - - mem_used += TO_PARAGRAPH_BOUNDRY(mem_used); - mem_used += MISC_DATA_SIZE; - - /* Allocate transmit FCB's. */ - mem_used += TO_PARAGRAPH_BOUNDRY(mem_used); - - mem_used += sizeof(FCBlock) * tp->num_tx_fcbs[MAC_QUEUE]; - mem_used += sizeof(FCBlock) * tp->num_tx_fcbs[NON_MAC_QUEUE]; - mem_used += sizeof(FCBlock) * tp->num_tx_fcbs[BUG_QUEUE]; - - /* Allocate transmit BDBs. */ - mem_used += sizeof(BDBlock) * tp->num_tx_bdbs[MAC_QUEUE]; - mem_used += sizeof(BDBlock) * tp->num_tx_bdbs[NON_MAC_QUEUE]; - mem_used += sizeof(BDBlock) * tp->num_tx_bdbs[BUG_QUEUE]; - - /* Allocate receive FCBs. */ - mem_used += sizeof(FCBlock) * tp->num_rx_fcbs[MAC_QUEUE]; - mem_used += sizeof(FCBlock) * tp->num_rx_fcbs[NON_MAC_QUEUE]; - - /* Allocate receive BDBs. */ - mem_used += sizeof(BDBlock) * tp->num_rx_bdbs[MAC_QUEUE]; - - /* Allocate MAC transmit buffers. - * MAC transmit buffers don't have to be on an ODD Boundary. - */ - mem_used += tp->tx_buff_size[MAC_QUEUE]; - - /* Allocate BUG transmit buffers. */ - mem_used += tp->tx_buff_size[BUG_QUEUE]; - - /* Allocate MAC receive data buffers. - * MAC receive buffers don't have to be on a 256 byte boundary. - */ - mem_used += RX_DATA_BUFFER_SIZE * tp->num_rx_bdbs[MAC_QUEUE]; - - /* Allocate Non-MAC transmit buffers. - * For maximum Netware performance, put Tx Buffers on - * ODD Boundary,and then restore malloc to Even Boundrys. - */ - mem_used += 1L; - mem_used += tp->tx_buff_size[NON_MAC_QUEUE]; - mem_used += 1L; - - /* CALCULATE NUMBER OF NON-MAC RX BDB'S - * AND NON-MAC RX DATA BUFFERS - * - * Make sure the mem_used offset at this point is the - * same as in allocate_shared memory or the following - * boundary adjustment will be incorrect (i.e. not allocating - * the non-mac receive buffers above cannot change the 256 - * byte offset). - * - * Since this cannot be guaranteed, adding the full 256 bytes - * to the amount of shared memory used at this point will guaranteed - * that the rx data buffers do not overflow shared memory. - */ - mem_used += 0x100; - - return (0xffff - mem_used) / (RX_DATA_BUFFER_SIZE + sizeof(BDBlock)); -} - -static int smctr_get_physical_drop_number(struct net_device *dev) -{ - smctr_issue_read_word_cmd(dev, RW_PHYSICAL_DROP_NUMBER); - - return smctr_wait_cmd(dev); -} - -static __u8 * smctr_get_rx_pointer(struct net_device *dev, short queue) -{ - struct net_local *tp = netdev_priv(dev); - BDBlock *bdb; - - bdb = (BDBlock *)((__u32)tp->ram_access - + (__u32)(tp->rx_fcb_curr[queue]->trc_bdb_ptr)); - - tp->rx_fcb_curr[queue]->bdb_ptr = bdb; - - return (__u8 *)bdb->data_block_ptr; -} - -static int smctr_get_station_id(struct net_device *dev) -{ - smctr_issue_read_word_cmd(dev, RW_INDIVIDUAL_MAC_ADDRESS); - - return smctr_wait_cmd(dev); -} - -/* - * Get the current statistics. This may be called with the card open - * or closed. - */ -static struct net_device_stats *smctr_get_stats(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - return (struct net_device_stats *)&tp->MacStat; -} - -static FCBlock *smctr_get_tx_fcb(struct net_device *dev, __u16 queue, - __u16 bytes_count) -{ - struct net_local *tp = netdev_priv(dev); - FCBlock *pFCB; - BDBlock *pbdb; - unsigned short alloc_size; - unsigned short *temp; - - if(smctr_debug > 20) - printk(KERN_DEBUG "smctr_get_tx_fcb\n"); - - /* check if there is enough FCB blocks */ - if(tp->num_tx_fcbs_used[queue] >= tp->num_tx_fcbs[queue]) - return (FCBlock *)(-1L); - - /* round off the input pkt size to the nearest even number */ - alloc_size = (bytes_count + 1) & 0xfffe; - - /* check if enough mem */ - if((tp->tx_buff_used[queue] + alloc_size) > tp->tx_buff_size[queue]) - return (FCBlock *)(-1L); - - /* check if past the end ; - * if exactly enough mem to end of ring, alloc from front. - * this avoids update of curr when curr = end - */ - if(((unsigned long)(tp->tx_buff_curr[queue]) + alloc_size) - >= (unsigned long)(tp->tx_buff_end[queue])) - { - /* check if enough memory from ring head */ - alloc_size = alloc_size + - (__u16)((__u32)tp->tx_buff_end[queue] - - (__u32)tp->tx_buff_curr[queue]); - - if((tp->tx_buff_used[queue] + alloc_size) - > tp->tx_buff_size[queue]) - { - return (FCBlock *)(-1L); - } - - /* ring wrap */ - tp->tx_buff_curr[queue] = tp->tx_buff_head[queue]; - } - - tp->tx_buff_used[queue] += alloc_size; - tp->num_tx_fcbs_used[queue]++; - tp->tx_fcb_curr[queue]->frame_length = bytes_count; - tp->tx_fcb_curr[queue]->memory_alloc = alloc_size; - temp = tp->tx_buff_curr[queue]; - tp->tx_buff_curr[queue] - = (__u16 *)((__u32)temp + (__u32)((bytes_count + 1) & 0xfffe)); - - pbdb = tp->tx_fcb_curr[queue]->bdb_ptr; - pbdb->buffer_length = bytes_count; - pbdb->data_block_ptr = temp; - pbdb->trc_data_block_ptr = TRC_POINTER(temp); - - pFCB = tp->tx_fcb_curr[queue]; - tp->tx_fcb_curr[queue] = tp->tx_fcb_curr[queue]->next_ptr; - - return pFCB; -} - -static int smctr_get_upstream_neighbor_addr(struct net_device *dev) -{ - smctr_issue_read_word_cmd(dev, RW_UPSTREAM_NEIGHBOR_ADDRESS); - - return smctr_wait_cmd(dev); -} - -static int smctr_hardware_send_packet(struct net_device *dev, - struct net_local *tp) -{ - struct tr_statistics *tstat = &tp->MacStat; - struct sk_buff *skb; - FCBlock *fcb; - - if(smctr_debug > 10) - printk(KERN_DEBUG"%s: smctr_hardware_send_packet\n", dev->name); - - if(tp->status != OPEN) - return -1; - - if(tp->monitor_state_ready != 1) - return -1; - - for(;;) - { - /* Send first buffer from queue */ - skb = skb_dequeue(&tp->SendSkbQueue); - if(skb == NULL) - return -1; - - tp->QueueSkb++; - - if(skb->len < SMC_HEADER_SIZE || skb->len > tp->max_packet_size) - return -1; - - smctr_enable_16bit(dev); - smctr_set_page(dev, (__u8 *)tp->ram_access); - - if((fcb = smctr_get_tx_fcb(dev, NON_MAC_QUEUE, skb->len)) - == (FCBlock *)(-1L)) - { - smctr_disable_16bit(dev); - return -1; - } - - smctr_tx_move_frame(dev, skb, - (__u8 *)fcb->bdb_ptr->data_block_ptr, skb->len); - - smctr_set_page(dev, (__u8 *)fcb); - - smctr_trc_send_packet(dev, fcb, NON_MAC_QUEUE); - dev_kfree_skb(skb); - - tstat->tx_packets++; - - smctr_disable_16bit(dev); - } - - return 0; -} - -static int smctr_init_acbs(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i; - ACBlock *acb; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_init_acbs\n", dev->name); - - acb = tp->acb_head; - acb->cmd_done_status = (ACB_COMMAND_DONE | ACB_COMMAND_SUCCESSFUL); - acb->cmd_info = ACB_CHAIN_END; - acb->cmd = 0; - acb->subcmd = 0; - acb->data_offset_lo = 0; - acb->data_offset_hi = 0; - acb->next_ptr - = (ACBlock *)(((char *)acb) + sizeof(ACBlock)); - acb->trc_next_ptr = TRC_POINTER(acb->next_ptr); - - for(i = 1; i < tp->num_acbs; i++) - { - acb = acb->next_ptr; - acb->cmd_done_status - = (ACB_COMMAND_DONE | ACB_COMMAND_SUCCESSFUL); - acb->cmd_info = ACB_CHAIN_END; - acb->cmd = 0; - acb->subcmd = 0; - acb->data_offset_lo = 0; - acb->data_offset_hi = 0; - acb->next_ptr - = (ACBlock *)(((char *)acb) + sizeof(ACBlock)); - acb->trc_next_ptr = TRC_POINTER(acb->next_ptr); - } - - acb->next_ptr = tp->acb_head; - acb->trc_next_ptr = TRC_POINTER(tp->acb_head); - tp->acb_next = tp->acb_head->next_ptr; - tp->acb_curr = tp->acb_head->next_ptr; - tp->num_acbs_used = 0; - - return 0; -} - -static int smctr_init_adapter(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_init_adapter\n", dev->name); - - tp->status = CLOSED; - tp->page_offset_mask = (tp->ram_usable * 1024) - 1; - skb_queue_head_init(&tp->SendSkbQueue); - tp->QueueSkb = MAX_TX_QUEUE; - - if(!(tp->group_address_0 & 0x0080)) - tp->group_address_0 |= 0x00C0; - - if(!(tp->functional_address_0 & 0x00C0)) - tp->functional_address_0 |= 0x00C0; - - tp->functional_address[0] &= 0xFF7F; - - if(tp->authorized_function_classes == 0) - tp->authorized_function_classes = 0x7FFF; - - if(tp->authorized_access_priority == 0) - tp->authorized_access_priority = 0x06; - - smctr_disable_bic_int(dev); - smctr_set_trc_reset(dev->base_addr); - - smctr_enable_16bit(dev); - smctr_set_page(dev, (__u8 *)tp->ram_access); - - if(smctr_checksum_firmware(dev)) - { - printk(KERN_ERR "%s: Previously loaded firmware is missing\n",dev->name); - return -ENOENT; - } - - if((err = smctr_ram_memory_test(dev))) - { - printk(KERN_ERR "%s: RAM memory test failed.\n", dev->name); - return -EIO; - } - - smctr_set_rx_look_ahead(dev); - smctr_load_node_addr(dev); - - /* Initialize adapter for Internal Self Test. */ - smctr_reset_adapter(dev); - if((err = smctr_init_card_real(dev))) - { - printk(KERN_ERR "%s: Initialization of card failed (%d)\n", - dev->name, err); - return -EINVAL; - } - - /* This routine clobbers the TRC's internal registers. */ - if((err = smctr_internal_self_test(dev))) - { - printk(KERN_ERR "%s: Card failed internal self test (%d)\n", - dev->name, err); - return -EINVAL; - } - - /* Re-Initialize adapter's internal registers */ - smctr_reset_adapter(dev); - if((err = smctr_init_card_real(dev))) - { - printk(KERN_ERR "%s: Initialization of card failed (%d)\n", - dev->name, err); - return -EINVAL; - } - - smctr_enable_bic_int(dev); - - if((err = smctr_issue_enable_int_cmd(dev, TRC_INTERRUPT_ENABLE_MASK))) - return err; - - smctr_disable_16bit(dev); - - return 0; -} - -static int smctr_init_card_real(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err = 0; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_init_card_real\n", dev->name); - - tp->sh_mem_used = 0; - tp->num_acbs = NUM_OF_ACBS; - - /* Range Check Max Packet Size */ - if(tp->max_packet_size < 256) - tp->max_packet_size = 256; - else - { - if(tp->max_packet_size > NON_MAC_TX_BUFFER_MEMORY) - tp->max_packet_size = NON_MAC_TX_BUFFER_MEMORY; - } - - tp->num_of_tx_buffs = (NON_MAC_TX_BUFFER_MEMORY - / tp->max_packet_size) - 1; - - if(tp->num_of_tx_buffs > NUM_NON_MAC_TX_FCBS) - tp->num_of_tx_buffs = NUM_NON_MAC_TX_FCBS; - else - { - if(tp->num_of_tx_buffs == 0) - tp->num_of_tx_buffs = 1; - } - - /* Tx queue constants */ - tp->num_tx_fcbs [BUG_QUEUE] = NUM_BUG_TX_FCBS; - tp->num_tx_bdbs [BUG_QUEUE] = NUM_BUG_TX_BDBS; - tp->tx_buff_size [BUG_QUEUE] = BUG_TX_BUFFER_MEMORY; - tp->tx_buff_used [BUG_QUEUE] = 0; - tp->tx_queue_status [BUG_QUEUE] = NOT_TRANSMITING; - - tp->num_tx_fcbs [MAC_QUEUE] = NUM_MAC_TX_FCBS; - tp->num_tx_bdbs [MAC_QUEUE] = NUM_MAC_TX_BDBS; - tp->tx_buff_size [MAC_QUEUE] = MAC_TX_BUFFER_MEMORY; - tp->tx_buff_used [MAC_QUEUE] = 0; - tp->tx_queue_status [MAC_QUEUE] = NOT_TRANSMITING; - - tp->num_tx_fcbs [NON_MAC_QUEUE] = NUM_NON_MAC_TX_FCBS; - tp->num_tx_bdbs [NON_MAC_QUEUE] = NUM_NON_MAC_TX_BDBS; - tp->tx_buff_size [NON_MAC_QUEUE] = NON_MAC_TX_BUFFER_MEMORY; - tp->tx_buff_used [NON_MAC_QUEUE] = 0; - tp->tx_queue_status [NON_MAC_QUEUE] = NOT_TRANSMITING; - - /* Receive Queue Constants */ - tp->num_rx_fcbs[MAC_QUEUE] = NUM_MAC_RX_FCBS; - tp->num_rx_bdbs[MAC_QUEUE] = NUM_MAC_RX_BDBS; - - if(tp->extra_info & CHIP_REV_MASK) - tp->num_rx_fcbs[NON_MAC_QUEUE] = 78; /* 825 Rev. XE */ - else - tp->num_rx_fcbs[NON_MAC_QUEUE] = 7; /* 825 Rev. XD */ - - tp->num_rx_bdbs[NON_MAC_QUEUE] = smctr_get_num_rx_bdbs(dev); - - smctr_alloc_shared_memory(dev); - smctr_init_shared_memory(dev); - - if((err = smctr_issue_init_timers_cmd(dev))) - return err; - - if((err = smctr_issue_init_txrx_cmd(dev))) - { - printk(KERN_ERR "%s: Hardware failure\n", dev->name); - return err; - } - - return 0; -} - -static int smctr_init_rx_bdbs(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i, j; - BDBlock *bdb; - __u16 *buf; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_init_rx_bdbs\n", dev->name); - - for(i = 0; i < NUM_RX_QS_USED; i++) - { - bdb = tp->rx_bdb_head[i]; - buf = tp->rx_buff_head[i]; - bdb->info = (BDB_CHAIN_END | BDB_NO_WARNING); - bdb->buffer_length = RX_DATA_BUFFER_SIZE; - bdb->next_ptr = (BDBlock *)(((char *)bdb) + sizeof(BDBlock)); - bdb->data_block_ptr = buf; - bdb->trc_next_ptr = TRC_POINTER(bdb->next_ptr); - - if(i == NON_MAC_QUEUE) - bdb->trc_data_block_ptr = RX_BUFF_TRC_POINTER(buf); - else - bdb->trc_data_block_ptr = TRC_POINTER(buf); - - for(j = 1; j < tp->num_rx_bdbs[i]; j++) - { - bdb->next_ptr->back_ptr = bdb; - bdb = bdb->next_ptr; - buf = (__u16 *)((char *)buf + RX_DATA_BUFFER_SIZE); - bdb->info = (BDB_NOT_CHAIN_END | BDB_NO_WARNING); - bdb->buffer_length = RX_DATA_BUFFER_SIZE; - bdb->next_ptr = (BDBlock *)(((char *)bdb) + sizeof(BDBlock)); - bdb->data_block_ptr = buf; - bdb->trc_next_ptr = TRC_POINTER(bdb->next_ptr); - - if(i == NON_MAC_QUEUE) - bdb->trc_data_block_ptr = RX_BUFF_TRC_POINTER(buf); - else - bdb->trc_data_block_ptr = TRC_POINTER(buf); - } - - bdb->next_ptr = tp->rx_bdb_head[i]; - bdb->trc_next_ptr = TRC_POINTER(tp->rx_bdb_head[i]); - - tp->rx_bdb_head[i]->back_ptr = bdb; - tp->rx_bdb_curr[i] = tp->rx_bdb_head[i]->next_ptr; - } - - return 0; -} - -static int smctr_init_rx_fcbs(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i, j; - FCBlock *fcb; - - for(i = 0; i < NUM_RX_QS_USED; i++) - { - fcb = tp->rx_fcb_head[i]; - fcb->frame_status = 0; - fcb->frame_length = 0; - fcb->info = FCB_CHAIN_END; - fcb->next_ptr = (FCBlock *)(((char*)fcb) + sizeof(FCBlock)); - if(i == NON_MAC_QUEUE) - fcb->trc_next_ptr = RX_FCB_TRC_POINTER(fcb->next_ptr); - else - fcb->trc_next_ptr = TRC_POINTER(fcb->next_ptr); - - for(j = 1; j < tp->num_rx_fcbs[i]; j++) - { - fcb->next_ptr->back_ptr = fcb; - fcb = fcb->next_ptr; - fcb->frame_status = 0; - fcb->frame_length = 0; - fcb->info = FCB_WARNING; - fcb->next_ptr - = (FCBlock *)(((char *)fcb) + sizeof(FCBlock)); - - if(i == NON_MAC_QUEUE) - fcb->trc_next_ptr - = RX_FCB_TRC_POINTER(fcb->next_ptr); - else - fcb->trc_next_ptr - = TRC_POINTER(fcb->next_ptr); - } - - fcb->next_ptr = tp->rx_fcb_head[i]; - - if(i == NON_MAC_QUEUE) - fcb->trc_next_ptr = RX_FCB_TRC_POINTER(fcb->next_ptr); - else - fcb->trc_next_ptr = TRC_POINTER(fcb->next_ptr); - - tp->rx_fcb_head[i]->back_ptr = fcb; - tp->rx_fcb_curr[i] = tp->rx_fcb_head[i]->next_ptr; - } - - return 0; -} - -static int smctr_init_shared_memory(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i; - __u32 *iscpb; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_init_shared_memory\n", dev->name); - - smctr_set_page(dev, (__u8 *)(unsigned int)tp->iscpb_ptr); - - /* Initialize Initial System Configuration Point. (ISCP) */ - iscpb = (__u32 *)PAGE_POINTER(&tp->iscpb_ptr->trc_scgb_ptr); - *iscpb = (__u32)(SWAP_WORDS(TRC_POINTER(tp->scgb_ptr))); - - smctr_set_page(dev, (__u8 *)tp->ram_access); - - /* Initialize System Configuration Pointers. (SCP) */ - tp->scgb_ptr->config = (SCGB_ADDRESS_POINTER_FORMAT - | SCGB_MULTI_WORD_CONTROL | SCGB_DATA_FORMAT - | SCGB_BURST_LENGTH); - - tp->scgb_ptr->trc_sclb_ptr = TRC_POINTER(tp->sclb_ptr); - tp->scgb_ptr->trc_acb_ptr = TRC_POINTER(tp->acb_head); - tp->scgb_ptr->trc_isb_ptr = TRC_POINTER(tp->isb_ptr); - tp->scgb_ptr->isbsiz = (sizeof(ISBlock)) - 2; - - /* Initialize System Control Block. (SCB) */ - tp->sclb_ptr->valid_command = SCLB_VALID | SCLB_CMD_NOP; - tp->sclb_ptr->iack_code = 0; - tp->sclb_ptr->resume_control = 0; - tp->sclb_ptr->int_mask_control = 0; - tp->sclb_ptr->int_mask_state = 0; - - /* Initialize Interrupt Status Block. (ISB) */ - for(i = 0; i < NUM_OF_INTERRUPTS; i++) - { - tp->isb_ptr->IStatus[i].IType = 0xf0; - tp->isb_ptr->IStatus[i].ISubtype = 0; - } - - tp->current_isb_index = 0; - - /* Initialize Action Command Block. (ACB) */ - smctr_init_acbs(dev); - - /* Initialize transmit FCB's and BDB's. */ - smctr_link_tx_fcbs_to_bdbs(dev); - smctr_init_tx_bdbs(dev); - smctr_init_tx_fcbs(dev); - - /* Initialize receive FCB's and BDB's. */ - smctr_init_rx_bdbs(dev); - smctr_init_rx_fcbs(dev); - - return 0; -} - -static int smctr_init_tx_bdbs(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i, j; - BDBlock *bdb; - - for(i = 0; i < NUM_TX_QS_USED; i++) - { - bdb = tp->tx_bdb_head[i]; - bdb->info = (BDB_NOT_CHAIN_END | BDB_NO_WARNING); - bdb->next_ptr = (BDBlock *)(((char *)bdb) + sizeof(BDBlock)); - bdb->trc_next_ptr = TRC_POINTER(bdb->next_ptr); - - for(j = 1; j < tp->num_tx_bdbs[i]; j++) - { - bdb->next_ptr->back_ptr = bdb; - bdb = bdb->next_ptr; - bdb->info = (BDB_NOT_CHAIN_END | BDB_NO_WARNING); - bdb->next_ptr - = (BDBlock *)(((char *)bdb) + sizeof( BDBlock)); bdb->trc_next_ptr = TRC_POINTER(bdb->next_ptr); - } - - bdb->next_ptr = tp->tx_bdb_head[i]; - bdb->trc_next_ptr = TRC_POINTER(tp->tx_bdb_head[i]); - tp->tx_bdb_head[i]->back_ptr = bdb; - } - - return 0; -} - -static int smctr_init_tx_fcbs(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i, j; - FCBlock *fcb; - - for(i = 0; i < NUM_TX_QS_USED; i++) - { - fcb = tp->tx_fcb_head[i]; - fcb->frame_status = 0; - fcb->frame_length = 0; - fcb->info = FCB_CHAIN_END; - fcb->next_ptr = (FCBlock *)(((char *)fcb) + sizeof(FCBlock)); - fcb->trc_next_ptr = TRC_POINTER(fcb->next_ptr); - - for(j = 1; j < tp->num_tx_fcbs[i]; j++) - { - fcb->next_ptr->back_ptr = fcb; - fcb = fcb->next_ptr; - fcb->frame_status = 0; - fcb->frame_length = 0; - fcb->info = FCB_CHAIN_END; - fcb->next_ptr - = (FCBlock *)(((char *)fcb) + sizeof(FCBlock)); - fcb->trc_next_ptr = TRC_POINTER(fcb->next_ptr); - } - - fcb->next_ptr = tp->tx_fcb_head[i]; - fcb->trc_next_ptr = TRC_POINTER(tp->tx_fcb_head[i]); - - tp->tx_fcb_head[i]->back_ptr = fcb; - tp->tx_fcb_end[i] = tp->tx_fcb_head[i]->next_ptr; - tp->tx_fcb_curr[i] = tp->tx_fcb_head[i]->next_ptr; - tp->num_tx_fcbs_used[i] = 0; - } - - return 0; -} - -static int smctr_internal_self_test(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - if((err = smctr_issue_test_internal_rom_cmd(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - return err; - - if(tp->acb_head->cmd_done_status & 0xff) - return -1; - - if((err = smctr_issue_test_hic_cmd(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - return err; - - if(tp->acb_head->cmd_done_status & 0xff) - return -1; - - if((err = smctr_issue_test_mac_reg_cmd(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - return err; - - if(tp->acb_head->cmd_done_status & 0xff) - return -1; - - return 0; -} - -/* - * The typical workload of the driver: Handle the network interface interrupts. - */ -static irqreturn_t smctr_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *tp; - int ioaddr; - __u16 interrupt_unmask_bits = 0, interrupt_ack_code = 0xff00; - __u16 err1, err = NOT_MY_INTERRUPT; - __u8 isb_type, isb_subtype; - __u16 isb_index; - - ioaddr = dev->base_addr; - tp = netdev_priv(dev); - - if(tp->status == NOT_INITIALIZED) - return IRQ_NONE; - - spin_lock(&tp->lock); - - smctr_disable_bic_int(dev); - smctr_enable_16bit(dev); - - smctr_clear_int(dev); - - /* First read the LSB */ - while((tp->isb_ptr->IStatus[tp->current_isb_index].IType & 0xf0) == 0) - { - isb_index = tp->current_isb_index; - isb_type = tp->isb_ptr->IStatus[isb_index].IType; - isb_subtype = tp->isb_ptr->IStatus[isb_index].ISubtype; - - (tp->current_isb_index)++; - if(tp->current_isb_index == NUM_OF_INTERRUPTS) - tp->current_isb_index = 0; - - if(isb_type >= 0x10) - { - smctr_disable_16bit(dev); - spin_unlock(&tp->lock); - return IRQ_HANDLED; - } - - err = HARDWARE_FAILED; - interrupt_ack_code = isb_index; - tp->isb_ptr->IStatus[isb_index].IType |= 0xf0; - - interrupt_unmask_bits |= (1 << (__u16)isb_type); - - switch(isb_type) - { - case ISB_IMC_MAC_TYPE_3: - smctr_disable_16bit(dev); - - switch(isb_subtype) - { - case 0: - tp->monitor_state = MS_MONITOR_FSM_INACTIVE; - break; - - case 1: - tp->monitor_state = MS_REPEAT_BEACON_STATE; - break; - - case 2: - tp->monitor_state = MS_REPEAT_CLAIM_TOKEN_STATE; - break; - - case 3: - tp->monitor_state = MS_TRANSMIT_CLAIM_TOKEN_STATE; break; - - case 4: - tp->monitor_state = MS_STANDBY_MONITOR_STATE; - break; - - case 5: - tp->monitor_state = MS_TRANSMIT_BEACON_STATE; - break; - - case 6: - tp->monitor_state = MS_ACTIVE_MONITOR_STATE; - break; - - case 7: - tp->monitor_state = MS_TRANSMIT_RING_PURGE_STATE; - break; - - case 8: /* diagnostic state */ - break; - - case 9: - tp->monitor_state = MS_BEACON_TEST_STATE; - if(smctr_lobe_media_test(dev)) - { - tp->ring_status_flags = RING_STATUS_CHANGED; - tp->ring_status = AUTO_REMOVAL_ERROR; - smctr_ring_status_chg(dev); - smctr_bypass_state(dev); - } - else - smctr_issue_insert_cmd(dev); - break; - - /* case 0x0a-0xff, illegal states */ - default: - break; - } - - tp->ring_status_flags = MONITOR_STATE_CHANGED; - err = smctr_ring_status_chg(dev); - - smctr_enable_16bit(dev); - break; - - /* Type 0x02 - MAC Error Counters Interrupt - * One or more MAC Error Counter is half full - * MAC Error Counters - * Lost_FR_Error_Counter - * RCV_Congestion_Counter - * FR_copied_Error_Counter - * FREQ_Error_Counter - * Token_Error_Counter - * Line_Error_Counter - * Internal_Error_Count - */ - case ISB_IMC_MAC_ERROR_COUNTERS: - /* Read 802.5 Error Counters */ - err = smctr_issue_read_ring_status_cmd(dev); - break; - - /* Type 0x04 - MAC Type 2 Interrupt - * HOST needs to enqueue MAC Frame for transmission - * SubType Bit 15 - RQ_INIT_PDU( Request Initialization) * Changed from RQ_INIT_PDU to - * TRC_Status_Changed_Indicate - */ - case ISB_IMC_MAC_TYPE_2: - err = smctr_issue_read_ring_status_cmd(dev); - break; - - - /* Type 0x05 - TX Frame Interrupt (FI). */ - case ISB_IMC_TX_FRAME: - /* BUG QUEUE for TRC stuck receive BUG */ - if(isb_subtype & TX_PENDING_PRIORITY_2) - { - if((err = smctr_tx_complete(dev, BUG_QUEUE)) != SUCCESS) - break; - } - - /* NON-MAC frames only */ - if(isb_subtype & TX_PENDING_PRIORITY_1) - { - if((err = smctr_tx_complete(dev, NON_MAC_QUEUE)) != SUCCESS) - break; - } - - /* MAC frames only */ - if(isb_subtype & TX_PENDING_PRIORITY_0) - err = smctr_tx_complete(dev, MAC_QUEUE); break; - - /* Type 0x06 - TX END OF QUEUE (FE) */ - case ISB_IMC_END_OF_TX_QUEUE: - /* BUG queue */ - if(isb_subtype & TX_PENDING_PRIORITY_2) - { - /* ok to clear Receive FIFO overrun - * imask send_BUG now completes. - */ - interrupt_unmask_bits |= 0x800; - - tp->tx_queue_status[BUG_QUEUE] = NOT_TRANSMITING; - if((err = smctr_tx_complete(dev, BUG_QUEUE)) != SUCCESS) - break; - if((err = smctr_restart_tx_chain(dev, BUG_QUEUE)) != SUCCESS) - break; - } - - /* NON-MAC queue only */ - if(isb_subtype & TX_PENDING_PRIORITY_1) - { - tp->tx_queue_status[NON_MAC_QUEUE] = NOT_TRANSMITING; - if((err = smctr_tx_complete(dev, NON_MAC_QUEUE)) != SUCCESS) - break; - if((err = smctr_restart_tx_chain(dev, NON_MAC_QUEUE)) != SUCCESS) - break; - } - - /* MAC queue only */ - if(isb_subtype & TX_PENDING_PRIORITY_0) - { - tp->tx_queue_status[MAC_QUEUE] = NOT_TRANSMITING; - if((err = smctr_tx_complete(dev, MAC_QUEUE)) != SUCCESS) - break; - - err = smctr_restart_tx_chain(dev, MAC_QUEUE); - } - break; - - /* Type 0x07 - NON-MAC RX Resource Interrupt - * Subtype bit 12 - (BW) BDB warning - * Subtype bit 13 - (FW) FCB warning - * Subtype bit 14 - (BE) BDB End of chain - * Subtype bit 15 - (FE) FCB End of chain - */ - case ISB_IMC_NON_MAC_RX_RESOURCE: - tp->rx_fifo_overrun_count = 0; - tp->receive_queue_number = NON_MAC_QUEUE; - err1 = smctr_rx_frame(dev); - - if(isb_subtype & NON_MAC_RX_RESOURCE_FE) - { - if((err = smctr_issue_resume_rx_fcb_cmd( dev, NON_MAC_QUEUE)) != SUCCESS) break; - - if(tp->ptr_rx_fcb_overruns) - (*tp->ptr_rx_fcb_overruns)++; - } - - if(isb_subtype & NON_MAC_RX_RESOURCE_BE) - { - if((err = smctr_issue_resume_rx_bdb_cmd( dev, NON_MAC_QUEUE)) != SUCCESS) break; - - if(tp->ptr_rx_bdb_overruns) - (*tp->ptr_rx_bdb_overruns)++; - } - err = err1; - break; - - /* Type 0x08 - MAC RX Resource Interrupt - * Subtype bit 12 - (BW) BDB warning - * Subtype bit 13 - (FW) FCB warning - * Subtype bit 14 - (BE) BDB End of chain - * Subtype bit 15 - (FE) FCB End of chain - */ - case ISB_IMC_MAC_RX_RESOURCE: - tp->receive_queue_number = MAC_QUEUE; - err1 = smctr_rx_frame(dev); - - if(isb_subtype & MAC_RX_RESOURCE_FE) - { - if((err = smctr_issue_resume_rx_fcb_cmd( dev, MAC_QUEUE)) != SUCCESS) - break; - - if(tp->ptr_rx_fcb_overruns) - (*tp->ptr_rx_fcb_overruns)++; - } - - if(isb_subtype & MAC_RX_RESOURCE_BE) - { - if((err = smctr_issue_resume_rx_bdb_cmd( dev, MAC_QUEUE)) != SUCCESS) - break; - - if(tp->ptr_rx_bdb_overruns) - (*tp->ptr_rx_bdb_overruns)++; - } - err = err1; - break; - - /* Type 0x09 - NON_MAC RX Frame Interrupt */ - case ISB_IMC_NON_MAC_RX_FRAME: - tp->rx_fifo_overrun_count = 0; - tp->receive_queue_number = NON_MAC_QUEUE; - err = smctr_rx_frame(dev); - break; - - /* Type 0x0A - MAC RX Frame Interrupt */ - case ISB_IMC_MAC_RX_FRAME: - tp->receive_queue_number = MAC_QUEUE; - err = smctr_rx_frame(dev); - break; - - /* Type 0x0B - TRC status - * TRC has encountered an error condition - * subtype bit 14 - transmit FIFO underrun - * subtype bit 15 - receive FIFO overrun - */ - case ISB_IMC_TRC_FIFO_STATUS: - if(isb_subtype & TRC_FIFO_STATUS_TX_UNDERRUN) - { - if(tp->ptr_tx_fifo_underruns) - (*tp->ptr_tx_fifo_underruns)++; - } - - if(isb_subtype & TRC_FIFO_STATUS_RX_OVERRUN) - { - /* update overrun stuck receive counter - * if >= 3, has to clear it by sending - * back to back frames. We pick - * DAT(duplicate address MAC frame) - */ - tp->rx_fifo_overrun_count++; - - if(tp->rx_fifo_overrun_count >= 3) - { - tp->rx_fifo_overrun_count = 0; - - /* delay clearing fifo overrun - * imask till send_BUG tx - * complete posted - */ - interrupt_unmask_bits &= (~0x800); - printk(KERN_CRIT "Jay please send bug\n");// smctr_send_bug(dev); - } - - if(tp->ptr_rx_fifo_overruns) - (*tp->ptr_rx_fifo_overruns)++; - } - - err = SUCCESS; - break; - - /* Type 0x0C - Action Command Status Interrupt - * Subtype bit 14 - CB end of command chain (CE) - * Subtype bit 15 - CB command interrupt (CI) - */ - case ISB_IMC_COMMAND_STATUS: - err = SUCCESS; - if(tp->acb_head->cmd == ACB_CMD_HIC_NOP) - { - printk(KERN_ERR "i1\n"); - smctr_disable_16bit(dev); - - /* XXXXXXXXXXXXXXXXX */ - /* err = UM_Interrupt(dev); */ - - smctr_enable_16bit(dev); - } - else - { - if((tp->acb_head->cmd - == ACB_CMD_READ_TRC_STATUS) && - (tp->acb_head->subcmd - == RW_TRC_STATUS_BLOCK)) - { - if(tp->ptr_bcn_type) - { - *(tp->ptr_bcn_type) - = (__u32)((SBlock *)tp->misc_command_data)->BCN_Type; - } - - if(((SBlock *)tp->misc_command_data)->Status_CHG_Indicate & ERROR_COUNTERS_CHANGED) - { - smctr_update_err_stats(dev); - } - - if(((SBlock *)tp->misc_command_data)->Status_CHG_Indicate & TI_NDIS_RING_STATUS_CHANGED) - { - tp->ring_status - = ((SBlock*)tp->misc_command_data)->TI_NDIS_Ring_Status; - smctr_disable_16bit(dev); - err = smctr_ring_status_chg(dev); - smctr_enable_16bit(dev); - if((tp->ring_status & REMOVE_RECEIVED) && - (tp->config_word0 & NO_AUTOREMOVE)) - { - smctr_issue_remove_cmd(dev); - } - - if(err != SUCCESS) - { - tp->acb_pending = 0; - break; - } - } - - if(((SBlock *)tp->misc_command_data)->Status_CHG_Indicate & UNA_CHANGED) - { - if(tp->ptr_una) - { - tp->ptr_una[0] = SWAP_BYTES(((SBlock *)tp->misc_command_data)->UNA[0]); - tp->ptr_una[1] = SWAP_BYTES(((SBlock *)tp->misc_command_data)->UNA[1]); - tp->ptr_una[2] = SWAP_BYTES(((SBlock *)tp->misc_command_data)->UNA[2]); - } - - } - - if(((SBlock *)tp->misc_command_data)->Status_CHG_Indicate & READY_TO_SEND_RQ_INIT) { - err = smctr_send_rq_init(dev); - } - } - } - - tp->acb_pending = 0; - break; - - /* Type 0x0D - MAC Type 1 interrupt - * Subtype -- 00 FR_BCN received at S12 - * 01 FR_BCN received at S21 - * 02 FR_DAT(DA=MA, A<>0) received at S21 - * 03 TSM_EXP at S21 - * 04 FR_REMOVE received at S42 - * 05 TBR_EXP, BR_FLAG_SET at S42 - * 06 TBT_EXP at S53 - */ - case ISB_IMC_MAC_TYPE_1: - if(isb_subtype > 8) - { - err = HARDWARE_FAILED; - break; - } - - err = SUCCESS; - switch(isb_subtype) - { - case 0: - tp->join_state = JS_BYPASS_STATE; - if(tp->status != CLOSED) - { - tp->status = CLOSED; - err = smctr_status_chg(dev); - } - break; - - case 1: - tp->join_state = JS_LOBE_TEST_STATE; - break; - - case 2: - tp->join_state = JS_DETECT_MONITOR_PRESENT_STATE; - break; - - case 3: - tp->join_state = JS_AWAIT_NEW_MONITOR_STATE; - break; - - case 4: - tp->join_state = JS_DUPLICATE_ADDRESS_TEST_STATE; - break; - - case 5: - tp->join_state = JS_NEIGHBOR_NOTIFICATION_STATE; - break; - - case 6: - tp->join_state = JS_REQUEST_INITIALIZATION_STATE; - break; - - case 7: - tp->join_state = JS_JOIN_COMPLETE_STATE; - tp->status = OPEN; - err = smctr_status_chg(dev); - break; - - case 8: - tp->join_state = JS_BYPASS_WAIT_STATE; - break; - } - break ; - - /* Type 0x0E - TRC Initialization Sequence Interrupt - * Subtype -- 00-FF Initializatin sequence complete - */ - case ISB_IMC_TRC_INTRNL_TST_STATUS: - tp->status = INITIALIZED; - smctr_disable_16bit(dev); - err = smctr_status_chg(dev); - smctr_enable_16bit(dev); - break; - - /* other interrupt types, illegal */ - default: - break; - } - - if(err != SUCCESS) - break; - } - - /* Checking the ack code instead of the unmask bits here is because : - * while fixing the stuck receive, DAT frame are sent and mask off - * FIFO overrun interrupt temporarily (interrupt_unmask_bits = 0) - * but we still want to issue ack to ISB - */ - if(!(interrupt_ack_code & 0xff00)) - smctr_issue_int_ack(dev, interrupt_ack_code, interrupt_unmask_bits); - - smctr_disable_16bit(dev); - smctr_enable_bic_int(dev); - spin_unlock(&tp->lock); - - return IRQ_HANDLED; -} - -static int smctr_issue_enable_int_cmd(struct net_device *dev, - __u16 interrupt_enable_mask) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - tp->sclb_ptr->int_mask_control = interrupt_enable_mask; - tp->sclb_ptr->valid_command = SCLB_VALID | SCLB_CMD_CLEAR_INTERRUPT_MASK; - - smctr_set_ctrl_attention(dev); - - return 0; -} - -static int smctr_issue_int_ack(struct net_device *dev, __u16 iack_code, __u16 ibits) -{ - struct net_local *tp = netdev_priv(dev); - - if(smctr_wait_while_cbusy(dev)) - return -1; - - tp->sclb_ptr->int_mask_control = ibits; - tp->sclb_ptr->iack_code = iack_code << 1; /* use the offset from base */ tp->sclb_ptr->resume_control = 0; - tp->sclb_ptr->valid_command = SCLB_VALID | SCLB_IACK_CODE_VALID | SCLB_CMD_CLEAR_INTERRUPT_MASK; - - smctr_set_ctrl_attention(dev); - - return 0; -} - -static int smctr_issue_init_timers_cmd(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i; - int err; - __u16 *pTimer_Struc = (__u16 *)tp->misc_command_data; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - return err; - - tp->config_word0 = THDREN | DMA_TRIGGER | USETPT | NO_AUTOREMOVE; - tp->config_word1 = 0; - - if((tp->media_type == MEDIA_STP_16) || - (tp->media_type == MEDIA_UTP_16) || - (tp->media_type == MEDIA_STP_16_UTP_16)) - { - tp->config_word0 |= FREQ_16MB_BIT; - } - - if(tp->mode_bits & EARLY_TOKEN_REL) - tp->config_word0 |= ETREN; - - if(tp->mode_bits & LOOPING_MODE_MASK) - tp->config_word0 |= RX_OWN_BIT; - else - tp->config_word0 &= ~RX_OWN_BIT; - - if(tp->receive_mask & PROMISCUOUS_MODE) - tp->config_word0 |= PROMISCUOUS_BIT; - else - tp->config_word0 &= ~PROMISCUOUS_BIT; - - if(tp->receive_mask & ACCEPT_ERR_PACKETS) - tp->config_word0 |= SAVBAD_BIT; - else - tp->config_word0 &= ~SAVBAD_BIT; - - if(tp->receive_mask & ACCEPT_ATT_MAC_FRAMES) - tp->config_word0 |= RXATMAC; - else - tp->config_word0 &= ~RXATMAC; - - if(tp->receive_mask & ACCEPT_MULTI_PROM) - tp->config_word1 |= MULTICAST_ADDRESS_BIT; - else - tp->config_word1 &= ~MULTICAST_ADDRESS_BIT; - - if(tp->receive_mask & ACCEPT_SOURCE_ROUTING_SPANNING) - tp->config_word1 |= SOURCE_ROUTING_SPANNING_BITS; - else - { - if(tp->receive_mask & ACCEPT_SOURCE_ROUTING) - tp->config_word1 |= SOURCE_ROUTING_EXPLORER_BIT; - else - tp->config_word1 &= ~SOURCE_ROUTING_SPANNING_BITS; - } - - if((tp->media_type == MEDIA_STP_16) || - (tp->media_type == MEDIA_UTP_16) || - (tp->media_type == MEDIA_STP_16_UTP_16)) - { - tp->config_word1 |= INTERFRAME_SPACING_16; - } - else - tp->config_word1 |= INTERFRAME_SPACING_4; - - *pTimer_Struc++ = tp->config_word0; - *pTimer_Struc++ = tp->config_word1; - - if((tp->media_type == MEDIA_STP_4) || - (tp->media_type == MEDIA_UTP_4) || - (tp->media_type == MEDIA_STP_4_UTP_4)) - { - *pTimer_Struc++ = 0x00FA; /* prescale */ - *pTimer_Struc++ = 0x2710; /* TPT_limit */ - *pTimer_Struc++ = 0x2710; /* TQP_limit */ - *pTimer_Struc++ = 0x0A28; /* TNT_limit */ - *pTimer_Struc++ = 0x3E80; /* TBT_limit */ - *pTimer_Struc++ = 0x3A98; /* TSM_limit */ - *pTimer_Struc++ = 0x1B58; /* TAM_limit */ - *pTimer_Struc++ = 0x00C8; /* TBR_limit */ - *pTimer_Struc++ = 0x07D0; /* TER_limit */ - *pTimer_Struc++ = 0x000A; /* TGT_limit */ - *pTimer_Struc++ = 0x1162; /* THT_limit */ - *pTimer_Struc++ = 0x07D0; /* TRR_limit */ - *pTimer_Struc++ = 0x1388; /* TVX_limit */ - *pTimer_Struc++ = 0x0000; /* reserved */ - } - else - { - *pTimer_Struc++ = 0x03E8; /* prescale */ - *pTimer_Struc++ = 0x9C40; /* TPT_limit */ - *pTimer_Struc++ = 0x9C40; /* TQP_limit */ - *pTimer_Struc++ = 0x0A28; /* TNT_limit */ - *pTimer_Struc++ = 0x3E80; /* TBT_limit */ - *pTimer_Struc++ = 0x3A98; /* TSM_limit */ - *pTimer_Struc++ = 0x1B58; /* TAM_limit */ - *pTimer_Struc++ = 0x00C8; /* TBR_limit */ - *pTimer_Struc++ = 0x07D0; /* TER_limit */ - *pTimer_Struc++ = 0x000A; /* TGT_limit */ - *pTimer_Struc++ = 0x4588; /* THT_limit */ - *pTimer_Struc++ = 0x1F40; /* TRR_limit */ - *pTimer_Struc++ = 0x4E20; /* TVX_limit */ - *pTimer_Struc++ = 0x0000; /* reserved */ - } - - /* Set node address. */ - *pTimer_Struc++ = dev->dev_addr[0] << 8 - | (dev->dev_addr[1] & 0xFF); - *pTimer_Struc++ = dev->dev_addr[2] << 8 - | (dev->dev_addr[3] & 0xFF); - *pTimer_Struc++ = dev->dev_addr[4] << 8 - | (dev->dev_addr[5] & 0xFF); - - /* Set group address. */ - *pTimer_Struc++ = tp->group_address_0 << 8 - | tp->group_address_0 >> 8; - *pTimer_Struc++ = tp->group_address[0] << 8 - | tp->group_address[0] >> 8; - *pTimer_Struc++ = tp->group_address[1] << 8 - | tp->group_address[1] >> 8; - - /* Set functional address. */ - *pTimer_Struc++ = tp->functional_address_0 << 8 - | tp->functional_address_0 >> 8; - *pTimer_Struc++ = tp->functional_address[0] << 8 - | tp->functional_address[0] >> 8; - *pTimer_Struc++ = tp->functional_address[1] << 8 - | tp->functional_address[1] >> 8; - - /* Set Bit-Wise group address. */ - *pTimer_Struc++ = tp->bitwise_group_address[0] << 8 - | tp->bitwise_group_address[0] >> 8; - *pTimer_Struc++ = tp->bitwise_group_address[1] << 8 - | tp->bitwise_group_address[1] >> 8; - - /* Set ring number address. */ - *pTimer_Struc++ = tp->source_ring_number; - *pTimer_Struc++ = tp->target_ring_number; - - /* Physical drop number. */ - *pTimer_Struc++ = (unsigned short)0; - *pTimer_Struc++ = (unsigned short)0; - - /* Product instance ID. */ - for(i = 0; i < 9; i++) - *pTimer_Struc++ = (unsigned short)0; - - err = smctr_setup_single_cmd_w_data(dev, ACB_CMD_INIT_TRC_TIMERS, 0); - - return err; -} - -static int smctr_issue_init_txrx_cmd(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i; - int err; - void **txrx_ptrs = (void *)tp->misc_command_data; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - { - printk(KERN_ERR "%s: Hardware failure\n", dev->name); - return err; - } - - /* Initialize Transmit Queue Pointers that are used, to point to - * a single FCB. - */ - for(i = 0; i < NUM_TX_QS_USED; i++) - *txrx_ptrs++ = (void *)TRC_POINTER(tp->tx_fcb_head[i]); - - /* Initialize Transmit Queue Pointers that are NOT used to ZERO. */ - for(; i < MAX_TX_QS; i++) - *txrx_ptrs++ = (void *)0; - - /* Initialize Receive Queue Pointers (MAC and Non-MAC) that are - * used, to point to a single FCB and a BDB chain of buffers. - */ - for(i = 0; i < NUM_RX_QS_USED; i++) - { - *txrx_ptrs++ = (void *)TRC_POINTER(tp->rx_fcb_head[i]); - *txrx_ptrs++ = (void *)TRC_POINTER(tp->rx_bdb_head[i]); - } - - /* Initialize Receive Queue Pointers that are NOT used to ZERO. */ - for(; i < MAX_RX_QS; i++) - { - *txrx_ptrs++ = (void *)0; - *txrx_ptrs++ = (void *)0; - } - - err = smctr_setup_single_cmd_w_data(dev, ACB_CMD_INIT_TX_RX, 0); - - return err; -} - -static int smctr_issue_insert_cmd(struct net_device *dev) -{ - int err; - - err = smctr_setup_single_cmd(dev, ACB_CMD_INSERT, ACB_SUB_CMD_NOP); - - return err; -} - -static int smctr_issue_read_ring_status_cmd(struct net_device *dev) -{ - int err; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - return err; - - err = smctr_setup_single_cmd_w_data(dev, ACB_CMD_READ_TRC_STATUS, - RW_TRC_STATUS_BLOCK); - - return err; -} - -static int smctr_issue_read_word_cmd(struct net_device *dev, __u16 aword_cnt) -{ - int err; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - return err; - - err = smctr_setup_single_cmd_w_data(dev, ACB_CMD_MCT_READ_VALUE, - aword_cnt); - - return err; -} - -static int smctr_issue_remove_cmd(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - tp->sclb_ptr->resume_control = 0; - tp->sclb_ptr->valid_command = SCLB_VALID | SCLB_CMD_REMOVE; - - smctr_set_ctrl_attention(dev); - - return 0; -} - -static int smctr_issue_resume_acb_cmd(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - tp->sclb_ptr->resume_control = SCLB_RC_ACB; - tp->sclb_ptr->valid_command = SCLB_VALID | SCLB_RESUME_CONTROL_VALID; - - tp->acb_pending = 1; - - smctr_set_ctrl_attention(dev); - - return 0; -} - -static int smctr_issue_resume_rx_bdb_cmd(struct net_device *dev, __u16 queue) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - if(queue == MAC_QUEUE) - tp->sclb_ptr->resume_control = SCLB_RC_RX_MAC_BDB; - else - tp->sclb_ptr->resume_control = SCLB_RC_RX_NON_MAC_BDB; - - tp->sclb_ptr->valid_command = SCLB_VALID | SCLB_RESUME_CONTROL_VALID; - - smctr_set_ctrl_attention(dev); - - return 0; -} - -static int smctr_issue_resume_rx_fcb_cmd(struct net_device *dev, __u16 queue) -{ - struct net_local *tp = netdev_priv(dev); - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_issue_resume_rx_fcb_cmd\n", dev->name); - - if(smctr_wait_while_cbusy(dev)) - return -1; - - if(queue == MAC_QUEUE) - tp->sclb_ptr->resume_control = SCLB_RC_RX_MAC_FCB; - else - tp->sclb_ptr->resume_control = SCLB_RC_RX_NON_MAC_FCB; - - tp->sclb_ptr->valid_command = SCLB_VALID | SCLB_RESUME_CONTROL_VALID; - - smctr_set_ctrl_attention(dev); - - return 0; -} - -static int smctr_issue_resume_tx_fcb_cmd(struct net_device *dev, __u16 queue) -{ - struct net_local *tp = netdev_priv(dev); - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_issue_resume_tx_fcb_cmd\n", dev->name); - - if(smctr_wait_while_cbusy(dev)) - return -1; - - tp->sclb_ptr->resume_control = (SCLB_RC_TFCB0 << queue); - tp->sclb_ptr->valid_command = SCLB_RESUME_CONTROL_VALID | SCLB_VALID; - - smctr_set_ctrl_attention(dev); - - return 0; -} - -static int smctr_issue_test_internal_rom_cmd(struct net_device *dev) -{ - int err; - - err = smctr_setup_single_cmd(dev, ACB_CMD_MCT_TEST, - TRC_INTERNAL_ROM_TEST); - - return err; -} - -static int smctr_issue_test_hic_cmd(struct net_device *dev) -{ - int err; - - err = smctr_setup_single_cmd(dev, ACB_CMD_HIC_TEST, - TRC_HOST_INTERFACE_REG_TEST); - - return err; -} - -static int smctr_issue_test_mac_reg_cmd(struct net_device *dev) -{ - int err; - - err = smctr_setup_single_cmd(dev, ACB_CMD_MCT_TEST, - TRC_MAC_REGISTERS_TEST); - - return err; -} - -static int smctr_issue_trc_loopback_cmd(struct net_device *dev) -{ - int err; - - err = smctr_setup_single_cmd(dev, ACB_CMD_MCT_TEST, - TRC_INTERNAL_LOOPBACK); - - return err; -} - -static int smctr_issue_tri_loopback_cmd(struct net_device *dev) -{ - int err; - - err = smctr_setup_single_cmd(dev, ACB_CMD_MCT_TEST, - TRC_TRI_LOOPBACK); - - return err; -} - -static int smctr_issue_write_byte_cmd(struct net_device *dev, - short aword_cnt, void *byte) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int iword, ibyte; - int err; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - return err; - - for(iword = 0, ibyte = 0; iword < (unsigned int)(aword_cnt & 0xff); - iword++, ibyte += 2) - { - tp->misc_command_data[iword] = (*((__u8 *)byte + ibyte) << 8) - | (*((__u8 *)byte + ibyte + 1)); - } - - return smctr_setup_single_cmd_w_data(dev, ACB_CMD_MCT_WRITE_VALUE, - aword_cnt); -} - -static int smctr_issue_write_word_cmd(struct net_device *dev, - short aword_cnt, void *word) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i, err; - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - if((err = smctr_wait_cmd(dev))) - return err; - - for(i = 0; i < (unsigned int)(aword_cnt & 0xff); i++) - tp->misc_command_data[i] = *((__u16 *)word + i); - - err = smctr_setup_single_cmd_w_data(dev, ACB_CMD_MCT_WRITE_VALUE, - aword_cnt); - - return err; -} - -static int smctr_join_complete_state(struct net_device *dev) -{ - int err; - - err = smctr_setup_single_cmd(dev, ACB_CMD_CHANGE_JOIN_STATE, - JS_JOIN_COMPLETE_STATE); - - return err; -} - -static int smctr_link_tx_fcbs_to_bdbs(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i, j; - FCBlock *fcb; - BDBlock *bdb; - - for(i = 0; i < NUM_TX_QS_USED; i++) - { - fcb = tp->tx_fcb_head[i]; - bdb = tp->tx_bdb_head[i]; - - for(j = 0; j < tp->num_tx_fcbs[i]; j++) - { - fcb->bdb_ptr = bdb; - fcb->trc_bdb_ptr = TRC_POINTER(bdb); - fcb = (FCBlock *)((char *)fcb + sizeof(FCBlock)); - bdb = (BDBlock *)((char *)bdb + sizeof(BDBlock)); - } - } - - return 0; -} - -static int smctr_load_firmware(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - const struct firmware *fw; - __u16 i, checksum = 0; - int err = 0; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_load_firmware\n", dev->name); - - if (request_firmware(&fw, "tr_smctr.bin", &dev->dev)) { - printk(KERN_ERR "%s: firmware not found\n", dev->name); - return UCODE_NOT_PRESENT; - } - - tp->num_of_tx_buffs = 4; - tp->mode_bits |= UMAC; - tp->receive_mask = 0; - tp->max_packet_size = 4177; - - /* Can only upload the firmware once per adapter reset. */ - if (tp->microcode_version != 0) { - err = (UCODE_PRESENT); - goto out; - } - - /* Verify the firmware exists and is there in the right amount. */ - if (!fw->data || - (*(fw->data + UCODE_VERSION_OFFSET) < UCODE_VERSION)) - { - err = (UCODE_NOT_PRESENT); - goto out; - } - - /* UCODE_SIZE is not included in Checksum. */ - for(i = 0; i < *((__u16 *)(fw->data + UCODE_SIZE_OFFSET)); i += 2) - checksum += *((__u16 *)(fw->data + 2 + i)); - if (checksum) { - err = (UCODE_NOT_PRESENT); - goto out; - } - - /* At this point we have a valid firmware image, lets kick it on up. */ - smctr_enable_adapter_ram(dev); - smctr_enable_16bit(dev); - smctr_set_page(dev, (__u8 *)tp->ram_access); - - if((smctr_checksum_firmware(dev)) || - (*(fw->data + UCODE_VERSION_OFFSET) > tp->microcode_version)) - { - smctr_enable_adapter_ctrl_store(dev); - - /* Zero out ram space for firmware. */ - for(i = 0; i < CS_RAM_SIZE; i += 2) - *((__u16 *)(tp->ram_access + i)) = 0; - - smctr_decode_firmware(dev, fw); - - tp->microcode_version = *(fw->data + UCODE_VERSION_OFFSET); *((__u16 *)(tp->ram_access + CS_RAM_VERSION_OFFSET)) - = (tp->microcode_version << 8); - *((__u16 *)(tp->ram_access + CS_RAM_CHECKSUM_OFFSET)) - = ~(tp->microcode_version << 8) + 1; - - smctr_disable_adapter_ctrl_store(dev); - - if(smctr_checksum_firmware(dev)) - err = HARDWARE_FAILED; - } - else - err = UCODE_PRESENT; - - smctr_disable_16bit(dev); - out: - release_firmware(fw); - return err; -} - -static int smctr_load_node_addr(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - unsigned int i; - __u8 r; - - for(i = 0; i < 6; i++) - { - r = inb(ioaddr + LAR0 + i); - dev->dev_addr[i] = (char)r; - } - dev->addr_len = 6; - - return 0; -} - -/* Lobe Media Test. - * During the transmission of the initial 1500 lobe media MAC frames, - * the phase lock loop in the 805 chip may lock, and then un-lock, causing - * the 825 to go into a PURGE state. When performing a PURGE, the MCT - * microcode will not transmit any frames given to it by the host, and - * will consequently cause a timeout. - * - * NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit - * queues other than the one used for the lobe_media_test should be - * disabled.!? - * - * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask - * has any multi-cast or promiscuous bits set, the receive_mask needs to - * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test - * run, and then the receive mask set back to its original value if the test - * is successful. - */ -static int smctr_lobe_media_test(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i, perror = 0; - unsigned short saved_rcv_mask; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_lobe_media_test\n", dev->name); - - /* Clear receive mask for lobe test. */ - saved_rcv_mask = tp->receive_mask; - tp->receive_mask = 0; - - smctr_chg_rx_mask(dev); - - /* Setup the lobe media test. */ - smctr_lobe_media_test_cmd(dev); - if(smctr_wait_cmd(dev)) - goto err; - - /* Tx lobe media test frames. */ - for(i = 0; i < 1500; ++i) - { - if(smctr_send_lobe_media_test(dev)) - { - if(perror) - goto err; - else - { - perror = 1; - if(smctr_lobe_media_test_cmd(dev)) - goto err; - } - } - } - - if(smctr_send_dat(dev)) - { - if(smctr_send_dat(dev)) - goto err; - } - - /* Check if any frames received during test. */ - if((tp->rx_fcb_curr[MAC_QUEUE]->frame_status) || - (tp->rx_fcb_curr[NON_MAC_QUEUE]->frame_status)) - goto err; - - /* Set receive mask to "Promisc" mode. */ - tp->receive_mask = saved_rcv_mask; - - smctr_chg_rx_mask(dev); - - return 0; -err: - smctr_reset_adapter(dev); - tp->status = CLOSED; - return LOBE_MEDIA_TEST_FAILED; -} - -static int smctr_lobe_media_test_cmd(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_lobe_media_test_cmd\n", dev->name); - - /* Change to lobe media test state. */ - if(tp->monitor_state != MS_BEACON_TEST_STATE) - { - smctr_lobe_media_test_state(dev); - if(smctr_wait_cmd(dev)) - { - printk(KERN_ERR "Lobe Failed test state\n"); - return LOBE_MEDIA_TEST_FAILED; - } - } - - err = smctr_setup_single_cmd(dev, ACB_CMD_MCT_TEST, - TRC_LOBE_MEDIA_TEST); - - return err; -} - -static int smctr_lobe_media_test_state(struct net_device *dev) -{ - int err; - - err = smctr_setup_single_cmd(dev, ACB_CMD_CHANGE_JOIN_STATE, - JS_LOBE_TEST_STATE); - - return err; -} - -static int smctr_make_8025_hdr(struct net_device *dev, - MAC_HEADER *rmf, MAC_HEADER *tmf, __u16 ac_fc) -{ - tmf->ac = MSB(ac_fc); /* msb is access control */ - tmf->fc = LSB(ac_fc); /* lsb is frame control */ - - tmf->sa[0] = dev->dev_addr[0]; - tmf->sa[1] = dev->dev_addr[1]; - tmf->sa[2] = dev->dev_addr[2]; - tmf->sa[3] = dev->dev_addr[3]; - tmf->sa[4] = dev->dev_addr[4]; - tmf->sa[5] = dev->dev_addr[5]; - - switch(tmf->vc) - { - /* Send RQ_INIT to RPS */ - case RQ_INIT: - tmf->da[0] = 0xc0; - tmf->da[1] = 0x00; - tmf->da[2] = 0x00; - tmf->da[3] = 0x00; - tmf->da[4] = 0x00; - tmf->da[5] = 0x02; - break; - - /* Send RPT_TX_FORWARD to CRS */ - case RPT_TX_FORWARD: - tmf->da[0] = 0xc0; - tmf->da[1] = 0x00; - tmf->da[2] = 0x00; - tmf->da[3] = 0x00; - tmf->da[4] = 0x00; - tmf->da[5] = 0x10; - break; - - /* Everything else goes to sender */ - default: - tmf->da[0] = rmf->sa[0]; - tmf->da[1] = rmf->sa[1]; - tmf->da[2] = rmf->sa[2]; - tmf->da[3] = rmf->sa[3]; - tmf->da[4] = rmf->sa[4]; - tmf->da[5] = rmf->sa[5]; - break; - } - - return 0; -} - -static int smctr_make_access_pri(struct net_device *dev, MAC_SUB_VECTOR *tsv) -{ - struct net_local *tp = netdev_priv(dev); - - tsv->svi = AUTHORIZED_ACCESS_PRIORITY; - tsv->svl = S_AUTHORIZED_ACCESS_PRIORITY; - - tsv->svv[0] = MSB(tp->authorized_access_priority); - tsv->svv[1] = LSB(tp->authorized_access_priority); - - return 0; -} - -static int smctr_make_addr_mod(struct net_device *dev, MAC_SUB_VECTOR *tsv) -{ - tsv->svi = ADDRESS_MODIFER; - tsv->svl = S_ADDRESS_MODIFER; - - tsv->svv[0] = 0; - tsv->svv[1] = 0; - - return 0; -} - -static int smctr_make_auth_funct_class(struct net_device *dev, - MAC_SUB_VECTOR *tsv) -{ - struct net_local *tp = netdev_priv(dev); - - tsv->svi = AUTHORIZED_FUNCTION_CLASS; - tsv->svl = S_AUTHORIZED_FUNCTION_CLASS; - - tsv->svv[0] = MSB(tp->authorized_function_classes); - tsv->svv[1] = LSB(tp->authorized_function_classes); - - return 0; -} - -static int smctr_make_corr(struct net_device *dev, - MAC_SUB_VECTOR *tsv, __u16 correlator) -{ - tsv->svi = CORRELATOR; - tsv->svl = S_CORRELATOR; - - tsv->svv[0] = MSB(correlator); - tsv->svv[1] = LSB(correlator); - - return 0; -} - -static int smctr_make_funct_addr(struct net_device *dev, MAC_SUB_VECTOR *tsv) -{ - struct net_local *tp = netdev_priv(dev); - - smctr_get_functional_address(dev); - - tsv->svi = FUNCTIONAL_ADDRESS; - tsv->svl = S_FUNCTIONAL_ADDRESS; - - tsv->svv[0] = MSB(tp->misc_command_data[0]); - tsv->svv[1] = LSB(tp->misc_command_data[0]); - - tsv->svv[2] = MSB(tp->misc_command_data[1]); - tsv->svv[3] = LSB(tp->misc_command_data[1]); - - return 0; -} - -static int smctr_make_group_addr(struct net_device *dev, MAC_SUB_VECTOR *tsv) -{ - struct net_local *tp = netdev_priv(dev); - - smctr_get_group_address(dev); - - tsv->svi = GROUP_ADDRESS; - tsv->svl = S_GROUP_ADDRESS; - - tsv->svv[0] = MSB(tp->misc_command_data[0]); - tsv->svv[1] = LSB(tp->misc_command_data[0]); - - tsv->svv[2] = MSB(tp->misc_command_data[1]); - tsv->svv[3] = LSB(tp->misc_command_data[1]); - - /* Set Group Address Sub-vector to all zeros if only the - * Group Address/Functional Address Indicator is set. - */ - if(tsv->svv[0] == 0x80 && tsv->svv[1] == 0x00 && - tsv->svv[2] == 0x00 && tsv->svv[3] == 0x00) - tsv->svv[0] = 0x00; - - return 0; -} - -static int smctr_make_phy_drop_num(struct net_device *dev, - MAC_SUB_VECTOR *tsv) -{ - struct net_local *tp = netdev_priv(dev); - - smctr_get_physical_drop_number(dev); - - tsv->svi = PHYSICAL_DROP; - tsv->svl = S_PHYSICAL_DROP; - - tsv->svv[0] = MSB(tp->misc_command_data[0]); - tsv->svv[1] = LSB(tp->misc_command_data[0]); - - tsv->svv[2] = MSB(tp->misc_command_data[1]); - tsv->svv[3] = LSB(tp->misc_command_data[1]); - - return 0; -} - -static int smctr_make_product_id(struct net_device *dev, MAC_SUB_VECTOR *tsv) -{ - int i; - - tsv->svi = PRODUCT_INSTANCE_ID; - tsv->svl = S_PRODUCT_INSTANCE_ID; - - for(i = 0; i < 18; i++) - tsv->svv[i] = 0xF0; - - return 0; -} - -static int smctr_make_station_id(struct net_device *dev, MAC_SUB_VECTOR *tsv) -{ - struct net_local *tp = netdev_priv(dev); - - smctr_get_station_id(dev); - - tsv->svi = STATION_IDENTIFER; - tsv->svl = S_STATION_IDENTIFER; - - tsv->svv[0] = MSB(tp->misc_command_data[0]); - tsv->svv[1] = LSB(tp->misc_command_data[0]); - - tsv->svv[2] = MSB(tp->misc_command_data[1]); - tsv->svv[3] = LSB(tp->misc_command_data[1]); - - tsv->svv[4] = MSB(tp->misc_command_data[2]); - tsv->svv[5] = LSB(tp->misc_command_data[2]); - - return 0; -} - -static int smctr_make_ring_station_status(struct net_device *dev, - MAC_SUB_VECTOR * tsv) -{ - tsv->svi = RING_STATION_STATUS; - tsv->svl = S_RING_STATION_STATUS; - - tsv->svv[0] = 0; - tsv->svv[1] = 0; - tsv->svv[2] = 0; - tsv->svv[3] = 0; - tsv->svv[4] = 0; - tsv->svv[5] = 0; - - return 0; -} - -static int smctr_make_ring_station_version(struct net_device *dev, - MAC_SUB_VECTOR *tsv) -{ - struct net_local *tp = netdev_priv(dev); - - tsv->svi = RING_STATION_VERSION_NUMBER; - tsv->svl = S_RING_STATION_VERSION_NUMBER; - - tsv->svv[0] = 0xe2; /* EBCDIC - S */ - tsv->svv[1] = 0xd4; /* EBCDIC - M */ - tsv->svv[2] = 0xc3; /* EBCDIC - C */ - tsv->svv[3] = 0x40; /* EBCDIC - */ - tsv->svv[4] = 0xe5; /* EBCDIC - V */ - tsv->svv[5] = 0xF0 + (tp->microcode_version >> 4); - tsv->svv[6] = 0xF0 + (tp->microcode_version & 0x0f); - tsv->svv[7] = 0x40; /* EBCDIC - */ - tsv->svv[8] = 0xe7; /* EBCDIC - X */ - - if(tp->extra_info & CHIP_REV_MASK) - tsv->svv[9] = 0xc5; /* EBCDIC - E */ - else - tsv->svv[9] = 0xc4; /* EBCDIC - D */ - - return 0; -} - -static int smctr_make_tx_status_code(struct net_device *dev, - MAC_SUB_VECTOR *tsv, __u16 tx_fstatus) -{ - tsv->svi = TRANSMIT_STATUS_CODE; - tsv->svl = S_TRANSMIT_STATUS_CODE; - - tsv->svv[0] = ((tx_fstatus & 0x0100 >> 6) | IBM_PASS_SOURCE_ADDR); - - /* Stripped frame status of Transmitted Frame */ - tsv->svv[1] = tx_fstatus & 0xff; - - return 0; -} - -static int smctr_make_upstream_neighbor_addr(struct net_device *dev, - MAC_SUB_VECTOR *tsv) -{ - struct net_local *tp = netdev_priv(dev); - - smctr_get_upstream_neighbor_addr(dev); - - tsv->svi = UPSTREAM_NEIGHBOR_ADDRESS; - tsv->svl = S_UPSTREAM_NEIGHBOR_ADDRESS; - - tsv->svv[0] = MSB(tp->misc_command_data[0]); - tsv->svv[1] = LSB(tp->misc_command_data[0]); - - tsv->svv[2] = MSB(tp->misc_command_data[1]); - tsv->svv[3] = LSB(tp->misc_command_data[1]); - - tsv->svv[4] = MSB(tp->misc_command_data[2]); - tsv->svv[5] = LSB(tp->misc_command_data[2]); - - return 0; -} - -static int smctr_make_wrap_data(struct net_device *dev, MAC_SUB_VECTOR *tsv) -{ - tsv->svi = WRAP_DATA; - tsv->svl = S_WRAP_DATA; - - return 0; -} - -/* - * Open/initialize the board. This is called sometime after - * booting when the 'ifconfig' program is run. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is non-reboot way to recover if something goes wrong. - */ -static int smctr_open(struct net_device *dev) -{ - int err; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_open\n", dev->name); - - err = smctr_init_adapter(dev); - if(err < 0) - return err; - - return err; -} - -/* Interrupt driven open of Token card. */ -static int smctr_open_tr(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned long flags; - int err; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_open_tr\n", dev->name); - - /* Now we can actually open the adapter. */ - if(tp->status == OPEN) - return 0; - if(tp->status != INITIALIZED) - return -1; - - /* FIXME: it would work a lot better if we masked the irq sources - on the card here, then we could skip the locking and poll nicely */ - spin_lock_irqsave(&tp->lock, flags); - - smctr_set_page(dev, (__u8 *)tp->ram_access); - - if((err = smctr_issue_resume_rx_fcb_cmd(dev, (short)MAC_QUEUE))) - goto out; - - if((err = smctr_issue_resume_rx_bdb_cmd(dev, (short)MAC_QUEUE))) - goto out; - - if((err = smctr_issue_resume_rx_fcb_cmd(dev, (short)NON_MAC_QUEUE))) - goto out; - - if((err = smctr_issue_resume_rx_bdb_cmd(dev, (short)NON_MAC_QUEUE))) - goto out; - - tp->status = CLOSED; - - /* Insert into the Ring or Enter Loopback Mode. */ - if((tp->mode_bits & LOOPING_MODE_MASK) == LOOPBACK_MODE_1) - { - tp->status = CLOSED; - - if(!(err = smctr_issue_trc_loopback_cmd(dev))) - { - if(!(err = smctr_wait_cmd(dev))) - tp->status = OPEN; - } - - smctr_status_chg(dev); - } - else - { - if((tp->mode_bits & LOOPING_MODE_MASK) == LOOPBACK_MODE_2) - { - tp->status = CLOSED; - if(!(err = smctr_issue_tri_loopback_cmd(dev))) - { - if(!(err = smctr_wait_cmd(dev))) - tp->status = OPEN; - } - - smctr_status_chg(dev); - } - else - { - if((tp->mode_bits & LOOPING_MODE_MASK) - == LOOPBACK_MODE_3) - { - tp->status = CLOSED; - if(!(err = smctr_lobe_media_test_cmd(dev))) - { - if(!(err = smctr_wait_cmd(dev))) - tp->status = OPEN; - } - smctr_status_chg(dev); - } - else - { - if(!(err = smctr_lobe_media_test(dev))) - err = smctr_issue_insert_cmd(dev); - else - { - if(err == LOBE_MEDIA_TEST_FAILED) - printk(KERN_WARNING "%s: Lobe Media Test Failure - Check cable?\n", dev->name); - } - } - } - } - -out: - spin_unlock_irqrestore(&tp->lock, flags); - - return err; -} - -/* Check for a network adapter of this type, - * and return device structure if one exists. - */ -struct net_device __init *smctr_probe(int unit) -{ - struct net_device *dev = alloc_trdev(sizeof(struct net_local)); - static const unsigned ports[] = { - 0x200, 0x220, 0x240, 0x260, 0x280, 0x2A0, 0x2C0, 0x2E0, 0x300, - 0x320, 0x340, 0x360, 0x380, 0 - }; - const unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "tr%d", unit); - netdev_boot_setup_check(dev); - } - - if (dev->base_addr > 0x1ff) /* Check a single specified location. */ - err = smctr_probe1(dev, dev->base_addr); - else if(dev->base_addr != 0) /* Don't probe at all. */ - err =-ENXIO; - else { - for (port = ports; *port; port++) { - err = smctr_probe1(dev, *port); - if (!err) - break; - } - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: -#ifdef CONFIG_MCA_LEGACY - { struct net_local *tp = netdev_priv(dev); - if (tp->slot_num) - mca_mark_as_unused(tp->slot_num); - } -#endif - release_region(dev->base_addr, SMCTR_IO_EXTENT); - free_irq(dev->irq, dev); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops smctr_netdev_ops = { - .ndo_open = smctr_open, - .ndo_stop = smctr_close, - .ndo_start_xmit = smctr_send_packet, - .ndo_tx_timeout = smctr_timeout, - .ndo_get_stats = smctr_get_stats, - .ndo_set_rx_mode = smctr_set_multicast_list, -}; - -static int __init smctr_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned version_printed; - struct net_local *tp = netdev_priv(dev); - int err; - __u32 *ram; - - if(smctr_debug && version_printed++ == 0) - printk(version); - - spin_lock_init(&tp->lock); - dev->base_addr = ioaddr; - - /* Actually detect an adapter now. */ - err = smctr_chk_isa(dev); - if(err < 0) - { - if ((err = smctr_chk_mca(dev)) < 0) { - err = -ENODEV; - goto out; - } - } - - tp = netdev_priv(dev); - dev->mem_start = tp->ram_base; - dev->mem_end = dev->mem_start + 0x10000; - ram = (__u32 *)phys_to_virt(dev->mem_start); - tp->ram_access = *(__u32 *)&ram; - tp->status = NOT_INITIALIZED; - - err = smctr_load_firmware(dev); - if(err != UCODE_PRESENT && err != SUCCESS) - { - printk(KERN_ERR "%s: Firmware load failed (%d)\n", dev->name, err); - err = -EIO; - goto out; - } - - /* Allow user to specify ring speed on module insert. */ - if(ringspeed == 4) - tp->media_type = MEDIA_UTP_4; - else - tp->media_type = MEDIA_UTP_16; - - printk(KERN_INFO "%s: %s %s at Io %#4x, Irq %d, Rom %#4x, Ram %#4x.\n", - dev->name, smctr_name, smctr_model, - (unsigned int)dev->base_addr, - dev->irq, tp->rom_base, tp->ram_base); - - dev->netdev_ops = &smctr_netdev_ops; - dev->watchdog_timeo = HZ; - return 0; - -out: - return err; -} - -static int smctr_process_rx_packet(MAC_HEADER *rmf, __u16 size, - struct net_device *dev, __u16 rx_status) -{ - struct net_local *tp = netdev_priv(dev); - struct sk_buff *skb; - __u16 rcode, correlator; - int err = 0; - __u8 xframe = 1; - - rmf->vl = SWAP_BYTES(rmf->vl); - if(rx_status & FCB_RX_STATUS_DA_MATCHED) - { - switch(rmf->vc) - { - /* Received MAC Frames Processed by RS. */ - case INIT: - if((rcode = smctr_rcv_init(dev, rmf, &correlator)) == HARDWARE_FAILED) - { - return rcode; - } - - if((err = smctr_send_rsp(dev, rmf, rcode, - correlator))) - { - return err; - } - break; - - case CHG_PARM: - if((rcode = smctr_rcv_chg_param(dev, rmf, - &correlator)) ==HARDWARE_FAILED) - { - return rcode; - } - - if((err = smctr_send_rsp(dev, rmf, rcode, - correlator))) - { - return err; - } - break; - - case RQ_ADDR: - if((rcode = smctr_rcv_rq_addr_state_attch(dev, - rmf, &correlator)) != POSITIVE_ACK) - { - if(rcode == HARDWARE_FAILED) - return rcode; - else - return smctr_send_rsp(dev, rmf, - rcode, correlator); - } - - if((err = smctr_send_rpt_addr(dev, rmf, - correlator))) - { - return err; - } - break; - - case RQ_ATTCH: - if((rcode = smctr_rcv_rq_addr_state_attch(dev, - rmf, &correlator)) != POSITIVE_ACK) - { - if(rcode == HARDWARE_FAILED) - return rcode; - else - return smctr_send_rsp(dev, rmf, - rcode, - correlator); - } - - if((err = smctr_send_rpt_attch(dev, rmf, - correlator))) - { - return err; - } - break; - - case RQ_STATE: - if((rcode = smctr_rcv_rq_addr_state_attch(dev, - rmf, &correlator)) != POSITIVE_ACK) - { - if(rcode == HARDWARE_FAILED) - return rcode; - else - return smctr_send_rsp(dev, rmf, - rcode, - correlator); - } - - if((err = smctr_send_rpt_state(dev, rmf, - correlator))) - { - return err; - } - break; - - case TX_FORWARD: { - __u16 uninitialized_var(tx_fstatus); - - if((rcode = smctr_rcv_tx_forward(dev, rmf)) - != POSITIVE_ACK) - { - if(rcode == HARDWARE_FAILED) - return rcode; - else - return smctr_send_rsp(dev, rmf, - rcode, - correlator); - } - - if((err = smctr_send_tx_forward(dev, rmf, - &tx_fstatus)) == HARDWARE_FAILED) - { - return err; - } - - if(err == A_FRAME_WAS_FORWARDED) - { - if((err = smctr_send_rpt_tx_forward(dev, - rmf, tx_fstatus)) - == HARDWARE_FAILED) - { - return err; - } - } - break; - } - - /* Received MAC Frames Processed by CRS/REM/RPS. */ - case RSP: - case RQ_INIT: - case RPT_NEW_MON: - case RPT_SUA_CHG: - case RPT_ACTIVE_ERR: - case RPT_NN_INCMP: - case RPT_ERROR: - case RPT_ATTCH: - case RPT_STATE: - case RPT_ADDR: - break; - - /* Rcvd Att. MAC Frame (if RXATMAC set) or UNKNOWN */ - default: - xframe = 0; - if(!(tp->receive_mask & ACCEPT_ATT_MAC_FRAMES)) - { - rcode = smctr_rcv_unknown(dev, rmf, - &correlator); - if((err = smctr_send_rsp(dev, rmf,rcode, - correlator))) - { - return err; - } - } - - break; - } - } - else - { - /* 1. DA doesn't match (Promiscuous Mode). - * 2. Parse for Extended MAC Frame Type. - */ - switch(rmf->vc) - { - case RSP: - case INIT: - case RQ_INIT: - case RQ_ADDR: - case RQ_ATTCH: - case RQ_STATE: - case CHG_PARM: - case RPT_ADDR: - case RPT_ERROR: - case RPT_ATTCH: - case RPT_STATE: - case RPT_NEW_MON: - case RPT_SUA_CHG: - case RPT_NN_INCMP: - case RPT_ACTIVE_ERR: - break; - - default: - xframe = 0; - break; - } - } - - /* NOTE: UNKNOWN MAC frames will NOT be passed up unless - * ACCEPT_ATT_MAC_FRAMES is set. - */ - if(((tp->receive_mask & ACCEPT_ATT_MAC_FRAMES) && - (xframe == (__u8)0)) || - ((tp->receive_mask & ACCEPT_EXT_MAC_FRAMES) && - (xframe == (__u8)1))) - { - rmf->vl = SWAP_BYTES(rmf->vl); - - if (!(skb = dev_alloc_skb(size))) - return -ENOMEM; - skb->len = size; - - /* Slide data into a sleek skb. */ - skb_put(skb, skb->len); - skb_copy_to_linear_data(skb, rmf, skb->len); - - /* Update Counters */ - tp->MacStat.rx_packets++; - tp->MacStat.rx_bytes += skb->len; - - /* Kick the packet on up. */ - skb->protocol = tr_type_trans(skb, dev); - netif_rx(skb); - err = 0; - } - - return err; -} - -/* Adapter RAM test. Incremental word ODD boundary data test. */ -static int smctr_ram_memory_test(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - __u16 page, pages_of_ram, start_pattern = 0, word_pattern = 0, - word_read = 0, err_word = 0, err_pattern = 0; - unsigned int err_offset; - __u32 j, pword; - __u8 err = 0; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_ram_memory_test\n", dev->name); - - start_pattern = 0x0001; - pages_of_ram = tp->ram_size / tp->ram_usable; - pword = tp->ram_access; - - /* Incremental word ODD boundary test. */ - for(page = 0; (page < pages_of_ram) && (~err); - page++, start_pattern += 0x8000) - { - smctr_set_page(dev, (__u8 *)(tp->ram_access - + (page * tp->ram_usable * 1024) + 1)); - word_pattern = start_pattern; - - for(j = 1; j < (__u32)(tp->ram_usable * 1024) - 1; j += 2) - *(__u16 *)(pword + j) = word_pattern++; - - word_pattern = start_pattern; - - for(j = 1; j < (__u32)(tp->ram_usable * 1024) - 1 && (~err); - j += 2, word_pattern++) - { - word_read = *(__u16 *)(pword + j); - if(word_read != word_pattern) - { - err = (__u8)1; - err_offset = j; - err_word = word_read; - err_pattern = word_pattern; - return RAM_TEST_FAILED; - } - } - } - - /* Zero out memory. */ - for(page = 0; page < pages_of_ram && (~err); page++) - { - smctr_set_page(dev, (__u8 *)(tp->ram_access - + (page * tp->ram_usable * 1024))); - word_pattern = 0; - - for(j = 0; j < (__u32)tp->ram_usable * 1024; j +=2) - *(__u16 *)(pword + j) = word_pattern; - - for(j =0; j < (__u32)tp->ram_usable * 1024 && (~err); j += 2) - { - word_read = *(__u16 *)(pword + j); - if(word_read != word_pattern) - { - err = (__u8)1; - err_offset = j; - err_word = word_read; - err_pattern = word_pattern; - return RAM_TEST_FAILED; - } - } - } - - smctr_set_page(dev, (__u8 *)tp->ram_access); - - return 0; -} - -static int smctr_rcv_chg_param(struct net_device *dev, MAC_HEADER *rmf, - __u16 *correlator) -{ - MAC_SUB_VECTOR *rsv; - signed short vlen; - __u16 rcode = POSITIVE_ACK; - unsigned int svectors = F_NO_SUB_VECTORS_FOUND; - - /* This Frame can only come from a CRS */ - if((rmf->dc_sc & SC_MASK) != SC_CRS) - return E_INAPPROPRIATE_SOURCE_CLASS; - - /* Remove MVID Length from total length. */ - vlen = (signed short)rmf->vl - 4; - - /* Point to First SVID */ - rsv = (MAC_SUB_VECTOR *)((__u32)rmf + sizeof(MAC_HEADER)); - - /* Search for Appropriate SVID's. */ - while((vlen > 0) && (rcode == POSITIVE_ACK)) - { - switch(rsv->svi) - { - case CORRELATOR: - svectors |= F_CORRELATOR; - rcode = smctr_set_corr(dev, rsv, correlator); - break; - - case LOCAL_RING_NUMBER: - svectors |= F_LOCAL_RING_NUMBER; - rcode = smctr_set_local_ring_num(dev, rsv); - break; - - case ASSIGN_PHYSICAL_DROP: - svectors |= F_ASSIGN_PHYSICAL_DROP; - rcode = smctr_set_phy_drop(dev, rsv); - break; - - case ERROR_TIMER_VALUE: - svectors |= F_ERROR_TIMER_VALUE; - rcode = smctr_set_error_timer_value(dev, rsv); - break; - - case AUTHORIZED_FUNCTION_CLASS: - svectors |= F_AUTHORIZED_FUNCTION_CLASS; - rcode = smctr_set_auth_funct_class(dev, rsv); - break; - - case AUTHORIZED_ACCESS_PRIORITY: - svectors |= F_AUTHORIZED_ACCESS_PRIORITY; - rcode = smctr_set_auth_access_pri(dev, rsv); - break; - - default: - rcode = E_SUB_VECTOR_UNKNOWN; - break; - } - - /* Let Sender Know if SUM of SV length's is - * larger then length in MVID length field - */ - if((vlen -= rsv->svl) < 0) - rcode = E_VECTOR_LENGTH_ERROR; - - rsv = (MAC_SUB_VECTOR *)((__u32)rsv + rsv->svl); - } - - if(rcode == POSITIVE_ACK) - { - /* Let Sender Know if MVID length field - * is larger then SUM of SV length's - */ - if(vlen != 0) - rcode = E_VECTOR_LENGTH_ERROR; - else - { - /* Let Sender Know if Expected SVID Missing */ - if((svectors & R_CHG_PARM) ^ R_CHG_PARM) - rcode = E_MISSING_SUB_VECTOR; - } - } - - return rcode; -} - -static int smctr_rcv_init(struct net_device *dev, MAC_HEADER *rmf, - __u16 *correlator) -{ - MAC_SUB_VECTOR *rsv; - signed short vlen; - __u16 rcode = POSITIVE_ACK; - unsigned int svectors = F_NO_SUB_VECTORS_FOUND; - - /* This Frame can only come from a RPS */ - if((rmf->dc_sc & SC_MASK) != SC_RPS) - return E_INAPPROPRIATE_SOURCE_CLASS; - - /* Remove MVID Length from total length. */ - vlen = (signed short)rmf->vl - 4; - - /* Point to First SVID */ - rsv = (MAC_SUB_VECTOR *)((__u32)rmf + sizeof(MAC_HEADER)); - - /* Search for Appropriate SVID's */ - while((vlen > 0) && (rcode == POSITIVE_ACK)) - { - switch(rsv->svi) - { - case CORRELATOR: - svectors |= F_CORRELATOR; - rcode = smctr_set_corr(dev, rsv, correlator); - break; - - case LOCAL_RING_NUMBER: - svectors |= F_LOCAL_RING_NUMBER; - rcode = smctr_set_local_ring_num(dev, rsv); - break; - - case ASSIGN_PHYSICAL_DROP: - svectors |= F_ASSIGN_PHYSICAL_DROP; - rcode = smctr_set_phy_drop(dev, rsv); - break; - - case ERROR_TIMER_VALUE: - svectors |= F_ERROR_TIMER_VALUE; - rcode = smctr_set_error_timer_value(dev, rsv); - break; - - default: - rcode = E_SUB_VECTOR_UNKNOWN; - break; - } - - /* Let Sender Know if SUM of SV length's is - * larger then length in MVID length field - */ - if((vlen -= rsv->svl) < 0) - rcode = E_VECTOR_LENGTH_ERROR; - - rsv = (MAC_SUB_VECTOR *)((__u32)rsv + rsv->svl); - } - - if(rcode == POSITIVE_ACK) - { - /* Let Sender Know if MVID length field - * is larger then SUM of SV length's - */ - if(vlen != 0) - rcode = E_VECTOR_LENGTH_ERROR; - else - { - /* Let Sender Know if Expected SV Missing */ - if((svectors & R_INIT) ^ R_INIT) - rcode = E_MISSING_SUB_VECTOR; - } - } - - return rcode; -} - -static int smctr_rcv_tx_forward(struct net_device *dev, MAC_HEADER *rmf) -{ - MAC_SUB_VECTOR *rsv; - signed short vlen; - __u16 rcode = POSITIVE_ACK; - unsigned int svectors = F_NO_SUB_VECTORS_FOUND; - - /* This Frame can only come from a CRS */ - if((rmf->dc_sc & SC_MASK) != SC_CRS) - return E_INAPPROPRIATE_SOURCE_CLASS; - - /* Remove MVID Length from total length */ - vlen = (signed short)rmf->vl - 4; - - /* Point to First SVID */ - rsv = (MAC_SUB_VECTOR *)((__u32)rmf + sizeof(MAC_HEADER)); - - /* Search for Appropriate SVID's */ - while((vlen > 0) && (rcode == POSITIVE_ACK)) - { - switch(rsv->svi) - { - case FRAME_FORWARD: - svectors |= F_FRAME_FORWARD; - rcode = smctr_set_frame_forward(dev, rsv, - rmf->dc_sc); - break; - - default: - rcode = E_SUB_VECTOR_UNKNOWN; - break; - } - - /* Let Sender Know if SUM of SV length's is - * larger then length in MVID length field - */ - if((vlen -= rsv->svl) < 0) - rcode = E_VECTOR_LENGTH_ERROR; - - rsv = (MAC_SUB_VECTOR *)((__u32)rsv + rsv->svl); - } - - if(rcode == POSITIVE_ACK) - { - /* Let Sender Know if MVID length field - * is larger then SUM of SV length's - */ - if(vlen != 0) - rcode = E_VECTOR_LENGTH_ERROR; - else - { - /* Let Sender Know if Expected SV Missing */ - if((svectors & R_TX_FORWARD) ^ R_TX_FORWARD) - rcode = E_MISSING_SUB_VECTOR; - } - } - - return rcode; -} - -static int smctr_rcv_rq_addr_state_attch(struct net_device *dev, - MAC_HEADER *rmf, __u16 *correlator) -{ - MAC_SUB_VECTOR *rsv; - signed short vlen; - __u16 rcode = POSITIVE_ACK; - unsigned int svectors = F_NO_SUB_VECTORS_FOUND; - - /* Remove MVID Length from total length */ - vlen = (signed short)rmf->vl - 4; - - /* Point to First SVID */ - rsv = (MAC_SUB_VECTOR *)((__u32)rmf + sizeof(MAC_HEADER)); - - /* Search for Appropriate SVID's */ - while((vlen > 0) && (rcode == POSITIVE_ACK)) - { - switch(rsv->svi) - { - case CORRELATOR: - svectors |= F_CORRELATOR; - rcode = smctr_set_corr(dev, rsv, correlator); - break; - - default: - rcode = E_SUB_VECTOR_UNKNOWN; - break; - } - - /* Let Sender Know if SUM of SV length's is - * larger then length in MVID length field - */ - if((vlen -= rsv->svl) < 0) - rcode = E_VECTOR_LENGTH_ERROR; - - rsv = (MAC_SUB_VECTOR *)((__u32)rsv + rsv->svl); - } - - if(rcode == POSITIVE_ACK) - { - /* Let Sender Know if MVID length field - * is larger then SUM of SV length's - */ - if(vlen != 0) - rcode = E_VECTOR_LENGTH_ERROR; - else - { - /* Let Sender Know if Expected SVID Missing */ - if((svectors & R_RQ_ATTCH_STATE_ADDR) - ^ R_RQ_ATTCH_STATE_ADDR) - rcode = E_MISSING_SUB_VECTOR; - } - } - - return rcode; -} - -static int smctr_rcv_unknown(struct net_device *dev, MAC_HEADER *rmf, - __u16 *correlator) -{ - MAC_SUB_VECTOR *rsv; - signed short vlen; - - *correlator = 0; - - /* Remove MVID Length from total length */ - vlen = (signed short)rmf->vl - 4; - - /* Point to First SVID */ - rsv = (MAC_SUB_VECTOR *)((__u32)rmf + sizeof(MAC_HEADER)); - - /* Search for CORRELATOR for RSP to UNKNOWN */ - while((vlen > 0) && (*correlator == 0)) - { - switch(rsv->svi) - { - case CORRELATOR: - smctr_set_corr(dev, rsv, correlator); - break; - - default: - break; - } - - vlen -= rsv->svl; - rsv = (MAC_SUB_VECTOR *)((__u32)rsv + rsv->svl); - } - - return E_UNRECOGNIZED_VECTOR_ID; -} - -/* - * Reset the 825 NIC and exit w: - * 1. The NIC reset cleared (non-reset state), halted and un-initialized. - * 2. TINT masked. - * 3. CBUSY masked. - * 4. TINT clear. - * 5. CBUSY clear. - */ -static int smctr_reset_adapter(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Reseting the NIC will put it in a halted and un-initialized state. */ smctr_set_trc_reset(ioaddr); - mdelay(200); /* ~2 ms */ - - smctr_clear_trc_reset(ioaddr); - mdelay(200); /* ~2 ms */ - - /* Remove any latched interrupts that occurred prior to reseting the - * adapter or possibily caused by line glitches due to the reset. - */ - outb(tp->trc_mask | CSR_CLRTINT | CSR_CLRCBUSY, ioaddr + CSR); - - return 0; -} - -static int smctr_restart_tx_chain(struct net_device *dev, short queue) -{ - struct net_local *tp = netdev_priv(dev); - int err = 0; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_restart_tx_chain\n", dev->name); - - if(tp->num_tx_fcbs_used[queue] != 0 && - tp->tx_queue_status[queue] == NOT_TRANSMITING) - { - tp->tx_queue_status[queue] = TRANSMITING; - err = smctr_issue_resume_tx_fcb_cmd(dev, queue); - } - - return err; -} - -static int smctr_ring_status_chg(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_ring_status_chg\n", dev->name); - - /* Check for ring_status_flag: whenever MONITOR_STATE_BIT - * Bit is set, check value of monitor_state, only then we - * enable and start transmit/receive timeout (if and only - * if it is MS_ACTIVE_MONITOR_STATE or MS_STANDBY_MONITOR_STATE) - */ - if(tp->ring_status_flags == MONITOR_STATE_CHANGED) - { - if((tp->monitor_state == MS_ACTIVE_MONITOR_STATE) || - (tp->monitor_state == MS_STANDBY_MONITOR_STATE)) - { - tp->monitor_state_ready = 1; - } - else - { - /* if adapter is NOT in either active monitor - * or standby monitor state => Disable - * transmit/receive timeout. - */ - tp->monitor_state_ready = 0; - - /* Ring speed problem, switching to auto mode. */ - if(tp->monitor_state == MS_MONITOR_FSM_INACTIVE && - !tp->cleanup) - { - printk(KERN_INFO "%s: Incorrect ring speed switching.\n", - dev->name); - smctr_set_ring_speed(dev); - } - } - } - - if(!(tp->ring_status_flags & RING_STATUS_CHANGED)) - return 0; - - switch(tp->ring_status) - { - case RING_RECOVERY: - printk(KERN_INFO "%s: Ring Recovery\n", dev->name); - break; - - case SINGLE_STATION: - printk(KERN_INFO "%s: Single Statinon\n", dev->name); - break; - - case COUNTER_OVERFLOW: - printk(KERN_INFO "%s: Counter Overflow\n", dev->name); - break; - - case REMOVE_RECEIVED: - printk(KERN_INFO "%s: Remove Received\n", dev->name); - break; - - case AUTO_REMOVAL_ERROR: - printk(KERN_INFO "%s: Auto Remove Error\n", dev->name); - break; - - case LOBE_WIRE_FAULT: - printk(KERN_INFO "%s: Lobe Wire Fault\n", dev->name); - break; - - case TRANSMIT_BEACON: - printk(KERN_INFO "%s: Transmit Beacon\n", dev->name); - break; - - case SOFT_ERROR: - printk(KERN_INFO "%s: Soft Error\n", dev->name); - break; - - case HARD_ERROR: - printk(KERN_INFO "%s: Hard Error\n", dev->name); - break; - - case SIGNAL_LOSS: - printk(KERN_INFO "%s: Signal Loss\n", dev->name); - break; - - default: - printk(KERN_INFO "%s: Unknown ring status change\n", - dev->name); - break; - } - - return 0; -} - -static int smctr_rx_frame(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - __u16 queue, status, rx_size, err = 0; - __u8 *pbuff; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_rx_frame\n", dev->name); - - queue = tp->receive_queue_number; - - while((status = tp->rx_fcb_curr[queue]->frame_status) != SUCCESS) - { - err = HARDWARE_FAILED; - - if(((status & 0x007f) == 0) || - ((tp->receive_mask & ACCEPT_ERR_PACKETS) != 0)) - { - /* frame length less the CRC (4 bytes) + FS (1 byte) */ - rx_size = tp->rx_fcb_curr[queue]->frame_length - 5; - - pbuff = smctr_get_rx_pointer(dev, queue); - - smctr_set_page(dev, pbuff); - smctr_disable_16bit(dev); - - /* pbuff points to addr within one page */ - pbuff = (__u8 *)PAGE_POINTER(pbuff); - - if(queue == NON_MAC_QUEUE) - { - struct sk_buff *skb; - - skb = dev_alloc_skb(rx_size); - if (skb) { - skb_put(skb, rx_size); - - skb_copy_to_linear_data(skb, pbuff, rx_size); - - /* Update Counters */ - tp->MacStat.rx_packets++; - tp->MacStat.rx_bytes += skb->len; - - /* Kick the packet on up. */ - skb->protocol = tr_type_trans(skb, dev); - netif_rx(skb); - } else { - } - } - else - smctr_process_rx_packet((MAC_HEADER *)pbuff, - rx_size, dev, status); - } - - smctr_enable_16bit(dev); - smctr_set_page(dev, (__u8 *)tp->ram_access); - smctr_update_rx_chain(dev, queue); - - if(err != SUCCESS) - break; - } - - return err; -} - -static int smctr_send_dat(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int i, err; - MAC_HEADER *tmf; - FCBlock *fcb; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_send_dat\n", dev->name); - - if((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, - sizeof(MAC_HEADER))) == (FCBlock *)(-1L)) - { - return OUT_OF_RESOURCES; - } - - /* Initialize DAT Data Fields. */ - tmf = (MAC_HEADER *)fcb->bdb_ptr->data_block_ptr; - tmf->ac = MSB(AC_FC_DAT); - tmf->fc = LSB(AC_FC_DAT); - - for(i = 0; i < 6; i++) - { - tmf->sa[i] = dev->dev_addr[i]; - tmf->da[i] = dev->dev_addr[i]; - - } - - tmf->vc = DAT; - tmf->dc_sc = DC_RS | SC_RS; - tmf->vl = 4; - tmf->vl = SWAP_BYTES(tmf->vl); - - /* Start Transmit. */ - if((err = smctr_trc_send_packet(dev, fcb, MAC_QUEUE))) - return err; - - /* Wait for Transmit to Complete */ - for(i = 0; i < 10000; i++) - { - if(fcb->frame_status & FCB_COMMAND_DONE) - break; - mdelay(1); - } - - /* Check if GOOD frame Tx'ed. */ - if(!(fcb->frame_status & FCB_COMMAND_DONE) || - fcb->frame_status & (FCB_TX_STATUS_E | FCB_TX_AC_BITS)) - { - return INITIALIZE_FAILED; - } - - /* De-allocated Tx FCB and Frame Buffer - * The FCB must be de-allocated manually if executing with - * interrupts disabled, other wise the ISR (LM_Service_Events) - * will de-allocate it when the interrupt occurs. - */ - tp->tx_queue_status[MAC_QUEUE] = NOT_TRANSMITING; - smctr_update_tx_chain(dev, fcb, MAC_QUEUE); - - return 0; -} - -static void smctr_timeout(struct net_device *dev) -{ - /* - * If we get here, some higher level has decided we are broken. - * There should really be a "kick me" function call instead. - * - * Resetting the token ring adapter takes a long time so just - * fake transmission time and go on trying. Our own timeout - * routine is in sktr_timer_chk() - */ - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -/* - * Gets skb from system, queues it and checks if it can be sent - */ -static netdev_tx_t smctr_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_send_packet\n", dev->name); - - /* - * Block a transmit overlap - */ - - netif_stop_queue(dev); - - if(tp->QueueSkb == 0) - return NETDEV_TX_BUSY; /* Return with tbusy set: queue full */ - - tp->QueueSkb--; - skb_queue_tail(&tp->SendSkbQueue, skb); - smctr_hardware_send_packet(dev, tp); - if(tp->QueueSkb > 0) - netif_wake_queue(dev); - - return NETDEV_TX_OK; -} - -static int smctr_send_lobe_media_test(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - MAC_SUB_VECTOR *tsv; - MAC_HEADER *tmf; - FCBlock *fcb; - __u32 i; - int err; - - if(smctr_debug > 15) - printk(KERN_DEBUG "%s: smctr_send_lobe_media_test\n", dev->name); - - if((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, sizeof(struct trh_hdr) - + S_WRAP_DATA + S_WRAP_DATA)) == (FCBlock *)(-1L)) - { - return OUT_OF_RESOURCES; - } - - /* Initialize DAT Data Fields. */ - tmf = (MAC_HEADER *)fcb->bdb_ptr->data_block_ptr; - tmf->ac = MSB(AC_FC_LOBE_MEDIA_TEST); - tmf->fc = LSB(AC_FC_LOBE_MEDIA_TEST); - - for(i = 0; i < 6; i++) - { - tmf->da[i] = 0; - tmf->sa[i] = dev->dev_addr[i]; - } - - tmf->vc = LOBE_MEDIA_TEST; - tmf->dc_sc = DC_RS | SC_RS; - tmf->vl = 4; - - tsv = (MAC_SUB_VECTOR *)((__u32)tmf + sizeof(MAC_HEADER)); - smctr_make_wrap_data(dev, tsv); - tmf->vl += tsv->svl; - - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_wrap_data(dev, tsv); - tmf->vl += tsv->svl; - - /* Start Transmit. */ - tmf->vl = SWAP_BYTES(tmf->vl); - if((err = smctr_trc_send_packet(dev, fcb, MAC_QUEUE))) - return err; - - /* Wait for Transmit to Complete. (10 ms). */ - for(i=0; i < 10000; i++) - { - if(fcb->frame_status & FCB_COMMAND_DONE) - break; - mdelay(1); - } - - /* Check if GOOD frame Tx'ed */ - if(!(fcb->frame_status & FCB_COMMAND_DONE) || - fcb->frame_status & (FCB_TX_STATUS_E | FCB_TX_AC_BITS)) - { - return LOBE_MEDIA_TEST_FAILED; - } - - /* De-allocated Tx FCB and Frame Buffer - * The FCB must be de-allocated manually if executing with - * interrupts disabled, other wise the ISR (LM_Service_Events) - * will de-allocate it when the interrupt occurs. - */ - tp->tx_queue_status[MAC_QUEUE] = NOT_TRANSMITING; - smctr_update_tx_chain(dev, fcb, MAC_QUEUE); - - return 0; -} - -static int smctr_send_rpt_addr(struct net_device *dev, MAC_HEADER *rmf, - __u16 correlator) -{ - MAC_HEADER *tmf; - MAC_SUB_VECTOR *tsv; - FCBlock *fcb; - - if((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, sizeof(MAC_HEADER) - + S_CORRELATOR + S_PHYSICAL_DROP + S_UPSTREAM_NEIGHBOR_ADDRESS - + S_ADDRESS_MODIFER + S_GROUP_ADDRESS + S_FUNCTIONAL_ADDRESS)) - == (FCBlock *)(-1L)) - { - return 0; - } - - tmf = (MAC_HEADER *)fcb->bdb_ptr->data_block_ptr; - tmf->vc = RPT_ADDR; - tmf->dc_sc = (rmf->dc_sc & SC_MASK) << 4; - tmf->vl = 4; - - smctr_make_8025_hdr(dev, rmf, tmf, AC_FC_RPT_ADDR); - - tsv = (MAC_SUB_VECTOR *)((__u32)tmf + sizeof(MAC_HEADER)); - smctr_make_corr(dev, tsv, correlator); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_phy_drop_num(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_upstream_neighbor_addr(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_addr_mod(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_group_addr(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_funct_addr(dev, tsv); - - tmf->vl += tsv->svl; - - /* Subtract out MVID and MVL which is - * include in both vl and MAC_HEADER - */ -/* fcb->frame_length = tmf->vl + sizeof(MAC_HEADER) - 4; - fcb->bdb_ptr->buffer_length = tmf->vl + sizeof(MAC_HEADER) - 4; -*/ - tmf->vl = SWAP_BYTES(tmf->vl); - - return smctr_trc_send_packet(dev, fcb, MAC_QUEUE); -} - -static int smctr_send_rpt_attch(struct net_device *dev, MAC_HEADER *rmf, - __u16 correlator) -{ - MAC_HEADER *tmf; - MAC_SUB_VECTOR *tsv; - FCBlock *fcb; - - if((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, sizeof(MAC_HEADER) - + S_CORRELATOR + S_PRODUCT_INSTANCE_ID + S_FUNCTIONAL_ADDRESS - + S_AUTHORIZED_FUNCTION_CLASS + S_AUTHORIZED_ACCESS_PRIORITY)) - == (FCBlock *)(-1L)) - { - return 0; - } - - tmf = (MAC_HEADER *)fcb->bdb_ptr->data_block_ptr; - tmf->vc = RPT_ATTCH; - tmf->dc_sc = (rmf->dc_sc & SC_MASK) << 4; - tmf->vl = 4; - - smctr_make_8025_hdr(dev, rmf, tmf, AC_FC_RPT_ATTCH); - - tsv = (MAC_SUB_VECTOR *)((__u32)tmf + sizeof(MAC_HEADER)); - smctr_make_corr(dev, tsv, correlator); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_product_id(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_funct_addr(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_auth_funct_class(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_access_pri(dev, tsv); - - tmf->vl += tsv->svl; - - /* Subtract out MVID and MVL which is - * include in both vl and MAC_HEADER - */ -/* fcb->frame_length = tmf->vl + sizeof(MAC_HEADER) - 4; - fcb->bdb_ptr->buffer_length = tmf->vl + sizeof(MAC_HEADER) - 4; -*/ - tmf->vl = SWAP_BYTES(tmf->vl); - - return smctr_trc_send_packet(dev, fcb, MAC_QUEUE); -} - -static int smctr_send_rpt_state(struct net_device *dev, MAC_HEADER *rmf, - __u16 correlator) -{ - MAC_HEADER *tmf; - MAC_SUB_VECTOR *tsv; - FCBlock *fcb; - - if((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, sizeof(MAC_HEADER) - + S_CORRELATOR + S_RING_STATION_VERSION_NUMBER - + S_RING_STATION_STATUS + S_STATION_IDENTIFER)) - == (FCBlock *)(-1L)) - { - return 0; - } - - tmf = (MAC_HEADER *)fcb->bdb_ptr->data_block_ptr; - tmf->vc = RPT_STATE; - tmf->dc_sc = (rmf->dc_sc & SC_MASK) << 4; - tmf->vl = 4; - - smctr_make_8025_hdr(dev, rmf, tmf, AC_FC_RPT_STATE); - - tsv = (MAC_SUB_VECTOR *)((__u32)tmf + sizeof(MAC_HEADER)); - smctr_make_corr(dev, tsv, correlator); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_ring_station_version(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_ring_station_status(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_station_id(dev, tsv); - - tmf->vl += tsv->svl; - - /* Subtract out MVID and MVL which is - * include in both vl and MAC_HEADER - */ -/* fcb->frame_length = tmf->vl + sizeof(MAC_HEADER) - 4; - fcb->bdb_ptr->buffer_length = tmf->vl + sizeof(MAC_HEADER) - 4; -*/ - tmf->vl = SWAP_BYTES(tmf->vl); - - return smctr_trc_send_packet(dev, fcb, MAC_QUEUE); -} - -static int smctr_send_rpt_tx_forward(struct net_device *dev, - MAC_HEADER *rmf, __u16 tx_fstatus) -{ - MAC_HEADER *tmf; - MAC_SUB_VECTOR *tsv; - FCBlock *fcb; - - if((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, sizeof(MAC_HEADER) - + S_TRANSMIT_STATUS_CODE)) == (FCBlock *)(-1L)) - { - return 0; - } - - tmf = (MAC_HEADER *)fcb->bdb_ptr->data_block_ptr; - tmf->vc = RPT_TX_FORWARD; - tmf->dc_sc = (rmf->dc_sc & SC_MASK) << 4; - tmf->vl = 4; - - smctr_make_8025_hdr(dev, rmf, tmf, AC_FC_RPT_TX_FORWARD); - - tsv = (MAC_SUB_VECTOR *)((__u32)tmf + sizeof(MAC_HEADER)); - smctr_make_tx_status_code(dev, tsv, tx_fstatus); - - tmf->vl += tsv->svl; - - /* Subtract out MVID and MVL which is - * include in both vl and MAC_HEADER - */ -/* fcb->frame_length = tmf->vl + sizeof(MAC_HEADER) - 4; - fcb->bdb_ptr->buffer_length = tmf->vl + sizeof(MAC_HEADER) - 4; -*/ - tmf->vl = SWAP_BYTES(tmf->vl); - - return smctr_trc_send_packet(dev, fcb, MAC_QUEUE); -} - -static int smctr_send_rsp(struct net_device *dev, MAC_HEADER *rmf, - __u16 rcode, __u16 correlator) -{ - MAC_HEADER *tmf; - MAC_SUB_VECTOR *tsv; - FCBlock *fcb; - - if((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, sizeof(MAC_HEADER) - + S_CORRELATOR + S_RESPONSE_CODE)) == (FCBlock *)(-1L)) - { - return 0; - } - - tmf = (MAC_HEADER *)fcb->bdb_ptr->data_block_ptr; - tmf->vc = RSP; - tmf->dc_sc = (rmf->dc_sc & SC_MASK) << 4; - tmf->vl = 4; - - smctr_make_8025_hdr(dev, rmf, tmf, AC_FC_RSP); - - tsv = (MAC_SUB_VECTOR *)((__u32)tmf + sizeof(MAC_HEADER)); - smctr_make_corr(dev, tsv, correlator); - - return 0; -} - -static int smctr_send_rq_init(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - MAC_HEADER *tmf; - MAC_SUB_VECTOR *tsv; - FCBlock *fcb; - unsigned int i, count = 0; - __u16 fstatus; - int err; - - do { - if(((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, sizeof(MAC_HEADER) - + S_PRODUCT_INSTANCE_ID + S_UPSTREAM_NEIGHBOR_ADDRESS - + S_RING_STATION_VERSION_NUMBER + S_ADDRESS_MODIFER)) - == (FCBlock *)(-1L))) - { - return 0; - } - - tmf = (MAC_HEADER *)fcb->bdb_ptr->data_block_ptr; - tmf->vc = RQ_INIT; - tmf->dc_sc = DC_RPS | SC_RS; - tmf->vl = 4; - - smctr_make_8025_hdr(dev, NULL, tmf, AC_FC_RQ_INIT); - - tsv = (MAC_SUB_VECTOR *)((__u32)tmf + sizeof(MAC_HEADER)); - smctr_make_product_id(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_upstream_neighbor_addr(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_ring_station_version(dev, tsv); - - tmf->vl += tsv->svl; - tsv = (MAC_SUB_VECTOR *)((__u32)tsv + tsv->svl); - smctr_make_addr_mod(dev, tsv); - - tmf->vl += tsv->svl; - - /* Subtract out MVID and MVL which is - * include in both vl and MAC_HEADER - */ -/* fcb->frame_length = tmf->vl + sizeof(MAC_HEADER) - 4; - fcb->bdb_ptr->buffer_length = tmf->vl + sizeof(MAC_HEADER) - 4; -*/ - tmf->vl = SWAP_BYTES(tmf->vl); - - if((err = smctr_trc_send_packet(dev, fcb, MAC_QUEUE))) - return err; - - /* Wait for Transmit to Complete */ - for(i = 0; i < 10000; i++) - { - if(fcb->frame_status & FCB_COMMAND_DONE) - break; - mdelay(1); - } - - /* Check if GOOD frame Tx'ed */ - fstatus = fcb->frame_status; - - if(!(fstatus & FCB_COMMAND_DONE)) - return HARDWARE_FAILED; - - if(!(fstatus & FCB_TX_STATUS_E)) - count++; - - /* De-allocated Tx FCB and Frame Buffer - * The FCB must be de-allocated manually if executing with - * interrupts disabled, other wise the ISR (LM_Service_Events) - * will de-allocate it when the interrupt occurs. - */ - tp->tx_queue_status[MAC_QUEUE] = NOT_TRANSMITING; - smctr_update_tx_chain(dev, fcb, MAC_QUEUE); - } while(count < 4 && ((fstatus & FCB_TX_AC_BITS) ^ FCB_TX_AC_BITS)); - - return smctr_join_complete_state(dev); -} - -static int smctr_send_tx_forward(struct net_device *dev, MAC_HEADER *rmf, - __u16 *tx_fstatus) -{ - struct net_local *tp = netdev_priv(dev); - FCBlock *fcb; - unsigned int i; - int err; - - /* Check if this is the END POINT of the Transmit Forward Chain. */ - if(rmf->vl <= 18) - return 0; - - /* Allocate Transmit FCB only by requesting 0 bytes - * of data buffer. - */ - if((fcb = smctr_get_tx_fcb(dev, MAC_QUEUE, 0)) == (FCBlock *)(-1L)) - return 0; - - /* Set pointer to Transmit Frame Buffer to the data - * portion of the received TX Forward frame, making - * sure to skip over the Vector Code (vc) and Vector - * length (vl). - */ - fcb->bdb_ptr->trc_data_block_ptr = TRC_POINTER((__u32)rmf - + sizeof(MAC_HEADER) + 2); - fcb->bdb_ptr->data_block_ptr = (__u16 *)((__u32)rmf - + sizeof(MAC_HEADER) + 2); - - fcb->frame_length = rmf->vl - 4 - 2; - fcb->bdb_ptr->buffer_length = rmf->vl - 4 - 2; - - if((err = smctr_trc_send_packet(dev, fcb, MAC_QUEUE))) - return err; - - /* Wait for Transmit to Complete */ - for(i = 0; i < 10000; i++) - { - if(fcb->frame_status & FCB_COMMAND_DONE) - break; - mdelay(1); - } - - /* Check if GOOD frame Tx'ed */ - if(!(fcb->frame_status & FCB_COMMAND_DONE)) - { - if((err = smctr_issue_resume_tx_fcb_cmd(dev, MAC_QUEUE))) - return err; - - for(i = 0; i < 10000; i++) - { - if(fcb->frame_status & FCB_COMMAND_DONE) - break; - mdelay(1); - } - - if(!(fcb->frame_status & FCB_COMMAND_DONE)) - return HARDWARE_FAILED; - } - - *tx_fstatus = fcb->frame_status; - - return A_FRAME_WAS_FORWARDED; -} - -static int smctr_set_auth_access_pri(struct net_device *dev, - MAC_SUB_VECTOR *rsv) -{ - struct net_local *tp = netdev_priv(dev); - - if(rsv->svl != S_AUTHORIZED_ACCESS_PRIORITY) - return E_SUB_VECTOR_LENGTH_ERROR; - - tp->authorized_access_priority = (rsv->svv[0] << 8 | rsv->svv[1]); - - return POSITIVE_ACK; -} - -static int smctr_set_auth_funct_class(struct net_device *dev, - MAC_SUB_VECTOR *rsv) -{ - struct net_local *tp = netdev_priv(dev); - - if(rsv->svl != S_AUTHORIZED_FUNCTION_CLASS) - return E_SUB_VECTOR_LENGTH_ERROR; - - tp->authorized_function_classes = (rsv->svv[0] << 8 | rsv->svv[1]); - - return POSITIVE_ACK; -} - -static int smctr_set_corr(struct net_device *dev, MAC_SUB_VECTOR *rsv, - __u16 *correlator) -{ - if(rsv->svl != S_CORRELATOR) - return E_SUB_VECTOR_LENGTH_ERROR; - - *correlator = (rsv->svv[0] << 8 | rsv->svv[1]); - - return POSITIVE_ACK; -} - -static int smctr_set_error_timer_value(struct net_device *dev, - MAC_SUB_VECTOR *rsv) -{ - __u16 err_tval; - int err; - - if(rsv->svl != S_ERROR_TIMER_VALUE) - return E_SUB_VECTOR_LENGTH_ERROR; - - err_tval = (rsv->svv[0] << 8 | rsv->svv[1])*10; - - smctr_issue_write_word_cmd(dev, RW_TER_THRESHOLD, &err_tval); - - if((err = smctr_wait_cmd(dev))) - return err; - - return POSITIVE_ACK; -} - -static int smctr_set_frame_forward(struct net_device *dev, - MAC_SUB_VECTOR *rsv, __u8 dc_sc) -{ - if((rsv->svl < 2) || (rsv->svl > S_FRAME_FORWARD)) - return E_SUB_VECTOR_LENGTH_ERROR; - - if((dc_sc & DC_MASK) != DC_CRS) - { - if(rsv->svl >= 2 && rsv->svl < 20) - return E_TRANSMIT_FORWARD_INVALID; - - if((rsv->svv[0] != 0) || (rsv->svv[1] != 0)) - return E_TRANSMIT_FORWARD_INVALID; - } - - return POSITIVE_ACK; -} - -static int smctr_set_local_ring_num(struct net_device *dev, - MAC_SUB_VECTOR *rsv) -{ - struct net_local *tp = netdev_priv(dev); - - if(rsv->svl != S_LOCAL_RING_NUMBER) - return E_SUB_VECTOR_LENGTH_ERROR; - - if(tp->ptr_local_ring_num) - *(__u16 *)(tp->ptr_local_ring_num) - = (rsv->svv[0] << 8 | rsv->svv[1]); - - return POSITIVE_ACK; -} - -static unsigned short smctr_set_ctrl_attention(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - if(tp->bic_type == BIC_585_CHIP) - outb((tp->trc_mask | HWR_CA), ioaddr + HWR); - else - { - outb((tp->trc_mask | CSR_CA), ioaddr + CSR); - outb(tp->trc_mask, ioaddr + CSR); - } - - return 0; -} - -static void smctr_set_multicast_list(struct net_device *dev) -{ - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_set_multicast_list\n", dev->name); -} - -static int smctr_set_page(struct net_device *dev, __u8 *buf) -{ - struct net_local *tp = netdev_priv(dev); - __u8 amask; - __u32 tptr; - - tptr = (__u32)buf - (__u32)tp->ram_access; - amask = (__u8)((tptr & PR_PAGE_MASK) >> 8); - outb(amask, dev->base_addr + PR); - - return 0; -} - -static int smctr_set_phy_drop(struct net_device *dev, MAC_SUB_VECTOR *rsv) -{ - int err; - - if(rsv->svl != S_PHYSICAL_DROP) - return E_SUB_VECTOR_LENGTH_ERROR; - - smctr_issue_write_byte_cmd(dev, RW_PHYSICAL_DROP_NUMBER, &rsv->svv[0]); - if((err = smctr_wait_cmd(dev))) - return err; - - return POSITIVE_ACK; -} - -/* Reset the ring speed to the opposite of what it was. This auto-pilot - * mode requires a complete reset and re-init of the adapter. - */ -static int smctr_set_ring_speed(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - if(tp->media_type == MEDIA_UTP_16) - tp->media_type = MEDIA_UTP_4; - else - tp->media_type = MEDIA_UTP_16; - - smctr_enable_16bit(dev); - - /* Re-Initialize adapter's internal registers */ - smctr_reset_adapter(dev); - - if((err = smctr_init_card_real(dev))) - return err; - - smctr_enable_bic_int(dev); - - if((err = smctr_issue_enable_int_cmd(dev, TRC_INTERRUPT_ENABLE_MASK))) - return err; - - smctr_disable_16bit(dev); - - return 0; -} - -static int smctr_set_rx_look_ahead(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - __u16 sword, rword; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_set_rx_look_ahead_flag\n", dev->name); - - tp->adapter_flags &= ~(FORCED_16BIT_MODE); - tp->adapter_flags |= RX_VALID_LOOKAHEAD; - - if(tp->adapter_bus == BUS_ISA16_TYPE) - { - sword = *((__u16 *)(tp->ram_access)); - *((__u16 *)(tp->ram_access)) = 0x1234; - - smctr_disable_16bit(dev); - rword = *((__u16 *)(tp->ram_access)); - smctr_enable_16bit(dev); - - if(rword != 0x1234) - tp->adapter_flags |= FORCED_16BIT_MODE; - - *((__u16 *)(tp->ram_access)) = sword; - } - - return 0; -} - -static int smctr_set_trc_reset(int ioaddr) -{ - __u8 r; - - r = inb(ioaddr + MSR); - outb(MSR_RST | r, ioaddr + MSR); - - return 0; -} - -/* - * This function can be called if the adapter is busy or not. - */ -static int smctr_setup_single_cmd(struct net_device *dev, - __u16 command, __u16 subcommand) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int err; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_setup_single_cmd\n", dev->name); - - if((err = smctr_wait_while_cbusy(dev))) - return err; - - if((err = (unsigned int)smctr_wait_cmd(dev))) - return err; - - tp->acb_head->cmd_done_status = 0; - tp->acb_head->cmd = command; - tp->acb_head->subcmd = subcommand; - - err = smctr_issue_resume_acb_cmd(dev); - - return err; -} - -/* - * This function can not be called with the adapter busy. - */ -static int smctr_setup_single_cmd_w_data(struct net_device *dev, - __u16 command, __u16 subcommand) -{ - struct net_local *tp = netdev_priv(dev); - - tp->acb_head->cmd_done_status = ACB_COMMAND_NOT_DONE; - tp->acb_head->cmd = command; - tp->acb_head->subcmd = subcommand; - tp->acb_head->data_offset_lo - = (__u16)TRC_POINTER(tp->misc_command_data); - - return smctr_issue_resume_acb_cmd(dev); -} - -static char *smctr_malloc(struct net_device *dev, __u16 size) -{ - struct net_local *tp = netdev_priv(dev); - char *m; - - m = (char *)(tp->ram_access + tp->sh_mem_used); - tp->sh_mem_used += (__u32)size; - - return m; -} - -static int smctr_status_chg(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_status_chg\n", dev->name); - - switch(tp->status) - { - case OPEN: - break; - - case CLOSED: - break; - - /* Interrupt driven open() completion. XXX */ - case INITIALIZED: - tp->group_address_0 = 0; - tp->group_address[0] = 0; - tp->group_address[1] = 0; - tp->functional_address_0 = 0; - tp->functional_address[0] = 0; - tp->functional_address[1] = 0; - smctr_open_tr(dev); - break; - - default: - printk(KERN_INFO "%s: status change unknown %x\n", - dev->name, tp->status); - break; - } - - return 0; -} - -static int smctr_trc_send_packet(struct net_device *dev, FCBlock *fcb, - __u16 queue) -{ - struct net_local *tp = netdev_priv(dev); - int err = 0; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_trc_send_packet\n", dev->name); - - fcb->info = FCB_CHAIN_END | FCB_ENABLE_TFS; - if(tp->num_tx_fcbs[queue] != 1) - fcb->back_ptr->info = FCB_INTERRUPT_ENABLE | FCB_ENABLE_TFS; - - if(tp->tx_queue_status[queue] == NOT_TRANSMITING) - { - tp->tx_queue_status[queue] = TRANSMITING; - err = smctr_issue_resume_tx_fcb_cmd(dev, queue); - } - - return err; -} - -static __u16 smctr_tx_complete(struct net_device *dev, __u16 queue) -{ - struct net_local *tp = netdev_priv(dev); - __u16 status, err = 0; - int cstatus; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_tx_complete\n", dev->name); - - while((status = tp->tx_fcb_end[queue]->frame_status) != SUCCESS) - { - if(status & 0x7e00 ) - { - err = HARDWARE_FAILED; - break; - } - - if((err = smctr_update_tx_chain(dev, tp->tx_fcb_end[queue], - queue)) != SUCCESS) - break; - - smctr_disable_16bit(dev); - - if(tp->mode_bits & UMAC) - { - if(!(status & (FCB_TX_STATUS_AR1 | FCB_TX_STATUS_AR2))) - cstatus = NO_SUCH_DESTINATION; - else - { - if(!(status & (FCB_TX_STATUS_CR1 | FCB_TX_STATUS_CR2))) - cstatus = DEST_OUT_OF_RESOURCES; - else - { - if(status & FCB_TX_STATUS_E) - cstatus = MAX_COLLISIONS; - else - cstatus = SUCCESS; - } - } - } - else - cstatus = SUCCESS; - - if(queue == BUG_QUEUE) - err = SUCCESS; - - smctr_enable_16bit(dev); - if(err != SUCCESS) - break; - } - - return err; -} - -static unsigned short smctr_tx_move_frame(struct net_device *dev, - struct sk_buff *skb, __u8 *pbuff, unsigned int bytes) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int ram_usable; - __u32 flen, len, offset = 0; - __u8 *frag, *page; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_tx_move_frame\n", dev->name); - - ram_usable = ((unsigned int)tp->ram_usable) << 10; - frag = skb->data; - flen = skb->len; - - while(flen > 0 && bytes > 0) - { - smctr_set_page(dev, pbuff); - - offset = SMC_PAGE_OFFSET(pbuff); - - if(offset + flen > ram_usable) - len = ram_usable - offset; - else - len = flen; - - if(len > bytes) - len = bytes; - - page = (char *) (offset + tp->ram_access); - memcpy(page, frag, len); - - flen -=len; - bytes -= len; - frag += len; - pbuff += len; - } - - return 0; -} - -/* Update the error statistic counters for this adapter. */ -static int smctr_update_err_stats(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - struct tr_statistics *tstat = &tp->MacStat; - - if(tstat->internal_errors) - tstat->internal_errors - += *(tp->misc_command_data + 0) & 0x00ff; - - if(tstat->line_errors) - tstat->line_errors += *(tp->misc_command_data + 0) >> 8; - - if(tstat->A_C_errors) - tstat->A_C_errors += *(tp->misc_command_data + 1) & 0x00ff; - - if(tstat->burst_errors) - tstat->burst_errors += *(tp->misc_command_data + 1) >> 8; - - if(tstat->abort_delimiters) - tstat->abort_delimiters += *(tp->misc_command_data + 2) >> 8; - - if(tstat->recv_congest_count) - tstat->recv_congest_count - += *(tp->misc_command_data + 3) & 0x00ff; - - if(tstat->lost_frames) - tstat->lost_frames - += *(tp->misc_command_data + 3) >> 8; - - if(tstat->frequency_errors) - tstat->frequency_errors += *(tp->misc_command_data + 4) & 0x00ff; - - if(tstat->frame_copied_errors) - tstat->frame_copied_errors - += *(tp->misc_command_data + 4) >> 8; - - if(tstat->token_errors) - tstat->token_errors += *(tp->misc_command_data + 5) >> 8; - - return 0; -} - -static int smctr_update_rx_chain(struct net_device *dev, __u16 queue) -{ - struct net_local *tp = netdev_priv(dev); - FCBlock *fcb; - BDBlock *bdb; - __u16 size, len; - - fcb = tp->rx_fcb_curr[queue]; - len = fcb->frame_length; - - fcb->frame_status = 0; - fcb->info = FCB_CHAIN_END; - fcb->back_ptr->info = FCB_WARNING; - - tp->rx_fcb_curr[queue] = tp->rx_fcb_curr[queue]->next_ptr; - - /* update RX BDBs */ - size = (len >> RX_BDB_SIZE_SHIFT); - if(len & RX_DATA_BUFFER_SIZE_MASK) - size += sizeof(BDBlock); - size &= (~RX_BDB_SIZE_MASK); - - /* check if wrap around */ - bdb = (BDBlock *)((__u32)(tp->rx_bdb_curr[queue]) + (__u32)(size)); - if((__u32)bdb >= (__u32)tp->rx_bdb_end[queue]) - { - bdb = (BDBlock *)((__u32)(tp->rx_bdb_head[queue]) - + (__u32)(bdb) - (__u32)(tp->rx_bdb_end[queue])); - } - - bdb->back_ptr->info = BDB_CHAIN_END; - tp->rx_bdb_curr[queue]->back_ptr->info = BDB_NOT_CHAIN_END; - tp->rx_bdb_curr[queue] = bdb; - - return 0; -} - -static int smctr_update_tx_chain(struct net_device *dev, FCBlock *fcb, - __u16 queue) -{ - struct net_local *tp = netdev_priv(dev); - - if(smctr_debug > 20) - printk(KERN_DEBUG "smctr_update_tx_chain\n"); - - if(tp->num_tx_fcbs_used[queue] <= 0) - return HARDWARE_FAILED; - else - { - if(tp->tx_buff_used[queue] < fcb->memory_alloc) - { - tp->tx_buff_used[queue] = 0; - return HARDWARE_FAILED; - } - - tp->tx_buff_used[queue] -= fcb->memory_alloc; - - /* if all transmit buffer are cleared - * need to set the tx_buff_curr[] to tx_buff_head[] - * otherwise, tx buffer will be segregate and cannot - * accommodate and buffer greater than (curr - head) and - * (end - curr) since we do not allow wrap around allocation. - */ - if(tp->tx_buff_used[queue] == 0) - tp->tx_buff_curr[queue] = tp->tx_buff_head[queue]; - - tp->num_tx_fcbs_used[queue]--; - fcb->frame_status = 0; - tp->tx_fcb_end[queue] = fcb->next_ptr; - netif_wake_queue(dev); - return 0; - } -} - -static int smctr_wait_cmd(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int loop_count = 0x20000; - - if(smctr_debug > 10) - printk(KERN_DEBUG "%s: smctr_wait_cmd\n", dev->name); - - while(loop_count) - { - if(tp->acb_head->cmd_done_status & ACB_COMMAND_DONE) - break; - udelay(1); - loop_count--; - } - - if(loop_count == 0) - return HARDWARE_FAILED; - - if(tp->acb_head->cmd_done_status & 0xff) - return HARDWARE_FAILED; - - return 0; -} - -static int smctr_wait_while_cbusy(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int timeout = 0x20000; - int ioaddr = dev->base_addr; - __u8 r; - - if(tp->bic_type == BIC_585_CHIP) - { - while(timeout) - { - r = inb(ioaddr + HWR); - if((r & HWR_CBUSY) == 0) - break; - timeout--; - } - } - else - { - while(timeout) - { - r = inb(ioaddr + CSR); - if((r & CSR_CBUSY) == 0) - break; - timeout--; - } - } - - if(timeout) - return 0; - else - return HARDWARE_FAILED; -} - -#ifdef MODULE - -static struct net_device* dev_smctr[SMCTR_MAX_ADAPTERS]; -static int io[SMCTR_MAX_ADAPTERS]; -static int irq[SMCTR_MAX_ADAPTERS]; - -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("tr_smctr.bin"); - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param(ringspeed, int, 0); - -static struct net_device * __init setup_card(int n) -{ - struct net_device *dev = alloc_trdev(sizeof(struct net_local)); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - dev->irq = irq[n]; - err = smctr_probe1(dev, io[n]); - if (err) - goto out; - - err = register_netdev(dev); - if (err) - goto out1; - return dev; - out1: -#ifdef CONFIG_MCA_LEGACY - { struct net_local *tp = netdev_priv(dev); - if (tp->slot_num) - mca_mark_as_unused(tp->slot_num); - } -#endif - release_region(dev->base_addr, SMCTR_IO_EXTENT); - free_irq(dev->irq, dev); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -int __init init_module(void) -{ - int i, found = 0; - struct net_device *dev; - - for(i = 0; i < SMCTR_MAX_ADAPTERS; i++) { - dev = io[0]? setup_card(i) : smctr_probe(-1); - if (!IS_ERR(dev)) { - ++found; - dev_smctr[i] = dev; - } - } - - return found ? 0 : -ENODEV; -} - -void __exit cleanup_module(void) -{ - int i; - - for(i = 0; i < SMCTR_MAX_ADAPTERS; i++) { - struct net_device *dev = dev_smctr[i]; - - if (dev) { - - unregister_netdev(dev); -#ifdef CONFIG_MCA_LEGACY - { struct net_local *tp = netdev_priv(dev); - if (tp->slot_num) - mca_mark_as_unused(tp->slot_num); - } -#endif - release_region(dev->base_addr, SMCTR_IO_EXTENT); - if (dev->irq) - free_irq(dev->irq, dev); - - free_netdev(dev); - } - } -} -#endif /* MODULE */ diff --git a/drivers/net/tokenring/smctr.h b/drivers/net/tokenring/smctr.h deleted file mode 100644 index 6e5700ab4fc3..000000000000 --- a/drivers/net/tokenring/smctr.h +++ /dev/null @@ -1,1585 +0,0 @@ -/* smctr.h: SMC Token Ring driver header for Linux - * - * Authors: - * - Jay Schulist <jschlst@samba.org> - */ - -#ifndef __LINUX_SMCTR_H -#define __LINUX_SMCTR_H - -#ifdef __KERNEL__ - -#define MAX_TX_QUEUE 10 - -#define SMC_HEADER_SIZE 14 - -#define SMC_PAGE_OFFSET(X) (((unsigned long)(X) - tp->ram_access) & tp->page_offset_mask) - -#define INIT 0x0D -#define RQ_ATTCH 0x10 -#define RQ_STATE 0x0F -#define RQ_ADDR 0x0E -#define CHG_PARM 0x0C -#define RSP 0x00 -#define TX_FORWARD 0x09 - -#define AC_FC_DAT ((3<<13) | 1) -#define DAT 0x07 - -#define RPT_NEW_MON 0x25 -#define RPT_SUA_CHG 0x26 -#define RPT_ACTIVE_ERR 0x28 -#define RPT_NN_INCMP 0x27 -#define RPT_ERROR 0x29 - -#define RQ_INIT 0x20 -#define RPT_ATTCH 0x24 -#define RPT_STATE 0x23 -#define RPT_ADDR 0x22 - -#define POSITIVE_ACK 0x0001 -#define A_FRAME_WAS_FORWARDED 0x8888 - -#define GROUP_ADDRESS 0x2B -#define PHYSICAL_DROP 0x0B -#define AUTHORIZED_ACCESS_PRIORITY 0x07 -#define AUTHORIZED_FUNCTION_CLASS 0x06 -#define FUNCTIONAL_ADDRESS 0x2C -#define RING_STATION_STATUS 0x29 -#define TRANSMIT_STATUS_CODE 0x2A -#define IBM_PASS_SOURCE_ADDR 0x01 -#define AC_FC_RPT_TX_FORWARD ((0<<13) | 0) -#define AC_FC_RPT_STATE ((0<<13) | 0) -#define AC_FC_RPT_ADDR ((0<<13) | 0) -#define CORRELATOR 0x09 - -#define POSITIVE_ACK 0x0001 /* */ -#define E_MAC_DATA_INCOMPLETE 0x8001 /* not used */ -#define E_VECTOR_LENGTH_ERROR 0x8002 /* */ -#define E_UNRECOGNIZED_VECTOR_ID 0x8003 /* */ -#define E_INAPPROPRIATE_SOURCE_CLASS 0x8004 /* */ -#define E_SUB_VECTOR_LENGTH_ERROR 0x8005 /* */ -#define E_TRANSMIT_FORWARD_INVALID 0x8006 /* def. by IBM */ -#define E_MISSING_SUB_VECTOR 0x8007 /* */ -#define E_SUB_VECTOR_UNKNOWN 0x8008 /* */ -#define E_MAC_HEADER_TOO_LONG 0x8009 /* */ -#define E_FUNCTION_DISABLED 0x800A /* not used */ - -#define A_FRAME_WAS_FORWARDED 0x8888 /* used by send_TX_FORWARD */ - -#define UPSTREAM_NEIGHBOR_ADDRESS 0x02 -#define LOCAL_RING_NUMBER 0x03 -#define ASSIGN_PHYSICAL_DROP 0x04 -#define ERROR_TIMER_VALUE 0x05 -#define AUTHORIZED_FUNCTION_CLASS 0x06 -#define AUTHORIZED_ACCESS_PRIORITY 0x07 -#define CORRELATOR 0x09 -#define PHYSICAL_DROP 0x0B -#define RESPONSE_CODE 0x20 -#define ADDRESS_MODIFER 0x21 -#define PRODUCT_INSTANCE_ID 0x22 -#define RING_STATION_VERSION_NUMBER 0x23 -#define WRAP_DATA 0x26 -#define FRAME_FORWARD 0x27 -#define STATION_IDENTIFER 0x28 -#define RING_STATION_STATUS 0x29 -#define TRANSMIT_STATUS_CODE 0x2A -#define GROUP_ADDRESS 0x2B -#define FUNCTIONAL_ADDRESS 0x2C - -#define F_NO_SUB_VECTORS_FOUND 0x0000 -#define F_UPSTREAM_NEIGHBOR_ADDRESS 0x0001 -#define F_LOCAL_RING_NUMBER 0x0002 -#define F_ASSIGN_PHYSICAL_DROP 0x0004 -#define F_ERROR_TIMER_VALUE 0x0008 -#define F_AUTHORIZED_FUNCTION_CLASS 0x0010 -#define F_AUTHORIZED_ACCESS_PRIORITY 0x0020 -#define F_CORRELATOR 0x0040 -#define F_PHYSICAL_DROP 0x0080 -#define F_RESPONSE_CODE 0x0100 -#define F_PRODUCT_INSTANCE_ID 0x0200 -#define F_RING_STATION_VERSION_NUMBER 0x0400 -#define F_STATION_IDENTIFER 0x0800 -#define F_RING_STATION_STATUS 0x1000 -#define F_GROUP_ADDRESS 0x2000 -#define F_FUNCTIONAL_ADDRESS 0x4000 -#define F_FRAME_FORWARD 0x8000 - -#define R_INIT 0x00 -#define R_RQ_ATTCH_STATE_ADDR 0x00 -#define R_CHG_PARM 0x00 -#define R_TX_FORWARD F_FRAME_FORWARD - - -#define UPSTREAM_NEIGHBOR_ADDRESS 0x02 -#define ADDRESS_MODIFER 0x21 -#define RING_STATION_VERSION_NUMBER 0x23 -#define PRODUCT_INSTANCE_ID 0x22 - -#define RPT_TX_FORWARD 0x2A - -#define AC_FC_INIT (3<<13) | 0 /* */ -#define AC_FC_RQ_INIT ((3<<13) | 0) /* */ -#define AC_FC_RQ_ATTCH (3<<13) | 0 /* DC = SC of rx frame */ -#define AC_FC_RQ_STATE (3<<13) | 0 /* DC = SC of rx frame */ -#define AC_FC_RQ_ADDR (3<<13) | 0 /* DC = SC of rx frame */ -#define AC_FC_CHG_PARM (3<<13) | 0 /* */ -#define AC_FC_RSP (0<<13) | 0 /* DC = SC of rx frame */ -#define AC_FC_RPT_ATTCH (0<<13) | 0 - -#define S_UPSTREAM_NEIGHBOR_ADDRESS 6 + 2 -#define S_LOCAL_RING_NUMBER 2 + 2 -#define S_ASSIGN_PHYSICAL_DROP 4 + 2 -#define S_ERROR_TIMER_VALUE 2 + 2 -#define S_AUTHORIZED_FUNCTION_CLASS 2 + 2 -#define S_AUTHORIZED_ACCESS_PRIORITY 2 + 2 -#define S_CORRELATOR 2 + 2 -#define S_PHYSICAL_DROP 4 + 2 -#define S_RESPONSE_CODE 4 + 2 -#define S_ADDRESS_MODIFER 2 + 2 -#define S_PRODUCT_INSTANCE_ID 18 + 2 -#define S_RING_STATION_VERSION_NUMBER 10 + 2 -#define S_STATION_IDENTIFER 6 + 2 -#define S_RING_STATION_STATUS 6 + 2 -#define S_GROUP_ADDRESS 4 + 2 -#define S_FUNCTIONAL_ADDRESS 4 + 2 -#define S_FRAME_FORWARD 252 + 2 -#define S_TRANSMIT_STATUS_CODE 2 + 2 - -#define ISB_IMC_RES0 0x0000 /* */ -#define ISB_IMC_MAC_TYPE_3 0x0001 /* MAC_ARC_INDICATE */ -#define ISB_IMC_MAC_ERROR_COUNTERS 0x0002 /* */ -#define ISB_IMC_RES1 0x0003 /* */ -#define ISB_IMC_MAC_TYPE_2 0x0004 /* QUE_MAC_INDICATE */ -#define ISB_IMC_TX_FRAME 0x0005 /* */ -#define ISB_IMC_END_OF_TX_QUEUE 0x0006 /* */ -#define ISB_IMC_NON_MAC_RX_RESOURCE 0x0007 /* */ -#define ISB_IMC_MAC_RX_RESOURCE 0x0008 /* */ -#define ISB_IMC_NON_MAC_RX_FRAME 0x0009 /* */ -#define ISB_IMC_MAC_RX_FRAME 0x000A /* */ -#define ISB_IMC_TRC_FIFO_STATUS 0x000B /* */ -#define ISB_IMC_COMMAND_STATUS 0x000C /* */ -#define ISB_IMC_MAC_TYPE_1 0x000D /* Self Removed */ -#define ISB_IMC_TRC_INTRNL_TST_STATUS 0x000E /* */ -#define ISB_IMC_RES2 0x000F /* */ - -#define NON_MAC_RX_RESOURCE_BW 0x10 /* shifted right 8 bits */ -#define NON_MAC_RX_RESOURCE_FW 0x20 /* shifted right 8 bits */ -#define NON_MAC_RX_RESOURCE_BE 0x40 /* shifted right 8 bits */ -#define NON_MAC_RX_RESOURCE_FE 0x80 /* shifted right 8 bits */ -#define RAW_NON_MAC_RX_RESOURCE_BW 0x1000 /* */ -#define RAW_NON_MAC_RX_RESOURCE_FW 0x2000 /* */ -#define RAW_NON_MAC_RX_RESOURCE_BE 0x4000 /* */ -#define RAW_NON_MAC_RX_RESOURCE_FE 0x8000 /* */ - -#define MAC_RX_RESOURCE_BW 0x10 /* shifted right 8 bits */ -#define MAC_RX_RESOURCE_FW 0x20 /* shifted right 8 bits */ -#define MAC_RX_RESOURCE_BE 0x40 /* shifted right 8 bits */ -#define MAC_RX_RESOURCE_FE 0x80 /* shifted right 8 bits */ -#define RAW_MAC_RX_RESOURCE_BW 0x1000 /* */ -#define RAW_MAC_RX_RESOURCE_FW 0x2000 /* */ -#define RAW_MAC_RX_RESOURCE_BE 0x4000 /* */ -#define RAW_MAC_RX_RESOURCE_FE 0x8000 /* */ - -#define TRC_FIFO_STATUS_TX_UNDERRUN 0x40 /* shifted right 8 bits */ -#define TRC_FIFO_STATUS_RX_OVERRUN 0x80 /* shifted right 8 bits */ -#define RAW_TRC_FIFO_STATUS_TX_UNDERRUN 0x4000 /* */ -#define RAW_TRC_FIFO_STATUS_RX_OVERRUN 0x8000 /* */ - -#define CSR_CLRTINT 0x08 - -#define MSB(X) ((__u8)((__u16) X >> 8)) -#define LSB(X) ((__u8)((__u16) X & 0xff)) - -#define AC_FC_LOBE_MEDIA_TEST ((3<<13) | 0) -#define S_WRAP_DATA 248 + 2 /* 500 + 2 */ -#define WRAP_DATA 0x26 -#define LOBE_MEDIA_TEST 0x08 - -/* Destination Class (dc) */ - -#define DC_MASK 0xF0 -#define DC_RS 0x00 -#define DC_CRS 0x40 -#define DC_RPS 0x50 -#define DC_REM 0x60 - -/* Source Classes (sc) */ - -#define SC_MASK 0x0F -#define SC_RS 0x00 -#define SC_CRS 0x04 -#define SC_RPS 0x05 -#define SC_REM 0x06 - -#define PR 0x11 -#define PR_PAGE_MASK 0x0C000 - -#define MICROCHANNEL 0x0008 -#define INTERFACE_CHIP 0x0010 -#define BOARD_16BIT 0x0040 -#define PAGED_RAM 0x0080 -#define WD8115TA (TOKEN_MEDIA | MICROCHANNEL | INTERFACE_CHIP | PAGED_RAM) -#define WD8115T (TOKEN_MEDIA | INTERFACE_CHIP | BOARD_16BIT | PAGED_RAM) - -#define BRD_ID_8316 0x50 - -#define r587_SER 0x001 -#define SER_DIN 0x80 -#define SER_DOUT 0x40 -#define SER_CLK 0x20 -#define SER_ECS 0x10 -#define SER_E806 0x08 -#define SER_PNP 0x04 -#define SER_BIO 0x02 -#define SER_16B 0x01 - -#define r587_IDR 0x004 -#define IDR_IRQ_MASK 0x0F0 -#define IDR_DCS_MASK 0x007 -#define IDR_RWS 0x008 - - -#define r587_BIO 0x003 -#define BIO_ENB 0x080 -#define BIO_MASK 0x03F - -#define r587_PCR 0x005 -#define PCR_RAMS 0x040 - - - -#define NUM_ADDR_BITS 8 - -#define ISA_MAX_ADDRESS 0x00ffffff - -#define SMCTR_MAX_ADAPTERS 7 - -#define MC_TABLE_ENTRIES 16 - -#define MAXFRAGMENTS 32 - -#define CHIP_REV_MASK 0x3000 - -#define MAX_TX_QS 8 -#define NUM_TX_QS_USED 3 - -#define MAX_RX_QS 2 -#define NUM_RX_QS_USED 2 - -#define INTEL_DATA_FORMAT 0x4000 -#define INTEL_ADDRESS_POINTER_FORMAT 0x8000 -#define PAGE_POINTER(X) ((((unsigned long)(X) - tp->ram_access) & tp->page_offset_mask) + tp->ram_access) -#define SWAP_WORDS(X) (((X & 0xFFFF) << 16) | (X >> 16)) - -#define INTERFACE_CHIP 0x0010 /* Soft Config Adapter */ -#define ADVANCED_FEATURES 0x0020 /* Adv. netw. interface features */ -#define BOARD_16BIT 0x0040 /* 16 bit capability */ -#define PAGED_RAM 0x0080 /* Adapter has paged RAM */ - -#define PAGED_ROM 0x0100 /* Adapter has paged ROM */ - -#define RAM_SIZE_UNKNOWN 0x0000 /* Unknown RAM size */ -#define RAM_SIZE_0K 0x0001 /* 0K RAM */ -#define RAM_SIZE_8K 0x0002 /* 8k RAM */ -#define RAM_SIZE_16K 0x0003 /* 16k RAM */ -#define RAM_SIZE_32K 0x0004 /* 32k RAM */ -#define RAM_SIZE_64K 0x0005 /* 64k RAM */ -#define RAM_SIZE_RESERVED_6 0x0006 /* Reserved RAM size */ -#define RAM_SIZE_RESERVED_7 0x0007 /* Reserved RAM size */ -#define RAM_SIZE_MASK 0x0007 /* Isolates RAM Size */ - -#define TOKEN_MEDIA 0x0005 - -#define BID_REG_0 0x00 -#define BID_REG_1 0x01 -#define BID_REG_2 0x02 -#define BID_REG_3 0x03 -#define BID_REG_4 0x04 -#define BID_REG_5 0x05 -#define BID_REG_6 0x06 -#define BID_REG_7 0x07 -#define BID_LAR_0 0x08 -#define BID_LAR_1 0x09 -#define BID_LAR_2 0x0A -#define BID_LAR_3 0x0B -#define BID_LAR_4 0x0C -#define BID_LAR_5 0x0D - -#define BID_BOARD_ID_BYTE 0x0E -#define BID_CHCKSM_BYTE 0x0F -#define BID_LAR_OFFSET 0x08 - -#define BID_MSZ_583_BIT 0x08 -#define BID_SIXTEEN_BIT_BIT 0x01 - -#define BID_BOARD_REV_MASK 0x1E - -#define BID_MEDIA_TYPE_BIT 0x01 -#define BID_SOFT_CONFIG_BIT 0x20 -#define BID_RAM_SIZE_BIT 0x40 -#define BID_BUS_TYPE_BIT 0x80 - -#define BID_CR 0x10 - -#define BID_TXP 0x04 /* Transmit Packet Command */ - -#define BID_TCR_DIFF 0x0D /* Transmit Configuration Register */ - -#define BID_TCR_VAL 0x18 /* Value to Test 8390 or 690 */ -#define BID_PS0 0x00 /* Register Page Select 0 */ -#define BID_PS1 0x40 /* Register Page Select 1 */ -#define BID_PS2 0x80 /* Register Page Select 2 */ -#define BID_PS_MASK 0x3F /* For Masking Off Page Select Bits */ - -#define BID_EEPROM_0 0x08 -#define BID_EEPROM_1 0x09 -#define BID_EEPROM_2 0x0A -#define BID_EEPROM_3 0x0B -#define BID_EEPROM_4 0x0C -#define BID_EEPROM_5 0x0D -#define BID_EEPROM_6 0x0E -#define BID_EEPROM_7 0x0F - -#define BID_OTHER_BIT 0x02 -#define BID_ICR_MASK 0x0C -#define BID_EAR_MASK 0x0F -#define BID_ENGR_PAGE 0x0A0 -#define BID_RLA 0x10 -#define BID_EA6 0x80 -#define BID_RECALL_DONE_MASK 0x10 -#define BID_BID_EEPROM_OVERRIDE 0xFFB0 -#define BID_EXTRA_EEPROM_OVERRIDE 0xFFD0 -#define BID_EEPROM_MEDIA_MASK 0x07 -#define BID_STARLAN_TYPE 0x00 -#define BID_ETHERNET_TYPE 0x01 -#define BID_TP_TYPE 0x02 -#define BID_EW_TYPE 0x03 -#define BID_TOKEN_RING_TYPE 0x04 -#define BID_UTP2_TYPE 0x05 -#define BID_EEPROM_IRQ_MASK 0x18 -#define BID_PRIMARY_IRQ 0x00 -#define BID_ALTERNATE_IRQ_1 0x08 -#define BID_ALTERNATE_IRQ_2 0x10 -#define BID_ALTERNATE_IRQ_3 0x18 -#define BID_EEPROM_RAM_SIZE_MASK 0xE0 -#define BID_EEPROM_RAM_SIZE_RES1 0x00 -#define BID_EEPROM_RAM_SIZE_RES2 0x20 -#define BID_EEPROM_RAM_SIZE_8K 0x40 -#define BID_EEPROM_RAM_SIZE_16K 0x60 -#define BID_EEPROM_RAM_SIZE_32K 0x80 -#define BID_EEPROM_RAM_SIZE_64K 0xA0 -#define BID_EEPROM_RAM_SIZE_RES3 0xC0 -#define BID_EEPROM_RAM_SIZE_RES4 0xE0 -#define BID_EEPROM_BUS_TYPE_MASK 0x07 -#define BID_EEPROM_BUS_TYPE_AT 0x00 -#define BID_EEPROM_BUS_TYPE_MCA 0x01 -#define BID_EEPROM_BUS_TYPE_EISA 0x02 -#define BID_EEPROM_BUS_TYPE_NEC 0x03 -#define BID_EEPROM_BUS_SIZE_MASK 0x18 -#define BID_EEPROM_BUS_SIZE_8BIT 0x00 -#define BID_EEPROM_BUS_SIZE_16BIT 0x08 -#define BID_EEPROM_BUS_SIZE_32BIT 0x10 -#define BID_EEPROM_BUS_SIZE_64BIT 0x18 -#define BID_EEPROM_BUS_MASTER 0x20 -#define BID_EEPROM_RAM_PAGING 0x40 -#define BID_EEPROM_ROM_PAGING 0x80 -#define BID_EEPROM_PAGING_MASK 0xC0 -#define BID_EEPROM_LOW_COST 0x08 -#define BID_EEPROM_IO_MAPPED 0x10 -#define BID_EEPROM_HMI 0x01 -#define BID_EEPROM_AUTO_MEDIA_DETECT 0x01 -#define BID_EEPROM_CHIP_REV_MASK 0x0C - -#define BID_EEPROM_LAN_ADDR 0x30 - -#define BID_EEPROM_MEDIA_OPTION 0x54 -#define BID_EEPROM_MEDIA_UTP 0x01 -#define BID_EEPROM_4MB_RING 0x08 -#define BID_EEPROM_16MB_RING 0x10 -#define BID_EEPROM_MEDIA_STP 0x40 - -#define BID_EEPROM_MISC_DATA 0x56 -#define BID_EEPROM_EARLY_TOKEN_RELEASE 0x02 - -#define CNFG_ID_8003E 0x6fc0 -#define CNFG_ID_8003S 0x6fc1 -#define CNFG_ID_8003W 0x6fc2 -#define CNFG_ID_8115TRA 0x6ec6 -#define CNFG_ID_8013E 0x61C8 -#define CNFG_ID_8013W 0x61C9 -#define CNFG_ID_BISTRO03E 0xEFE5 -#define CNFG_ID_BISTRO13E 0xEFD5 -#define CNFG_ID_BISTRO13W 0xEFD4 -#define CNFG_MSR_583 0x0 -#define CNFG_ICR_583 0x1 -#define CNFG_IAR_583 0x2 -#define CNFG_BIO_583 0x3 -#define CNFG_EAR_583 0x3 -#define CNFG_IRR_583 0x4 -#define CNFG_LAAR_584 0x5 -#define CNFG_GP2 0x7 -#define CNFG_LAAR_MASK 0x1F -#define CNFG_LAAR_ZWS 0x20 -#define CNFG_LAAR_L16E 0x40 -#define CNFG_ICR_IR2_584 0x04 -#define CNFG_ICR_MASK 0x08 -#define CNFG_ICR_MSZ 0x08 -#define CNFG_ICR_RLA 0x10 -#define CNFG_ICR_STO 0x80 -#define CNFG_IRR_IRQS 0x60 -#define CNFG_IRR_IEN 0x80 -#define CNFG_IRR_ZWS 0x01 -#define CNFG_GP2_BOOT_NIBBLE 0x0F -#define CNFG_IRR_OUT2 0x04 -#define CNFG_IRR_OUT1 0x02 - -#define CNFG_SIZE_8KB 8 -#define CNFG_SIZE_16KB 16 -#define CNFG_SIZE_32KB 32 -#define CNFG_SIZE_64KB 64 -#define CNFG_SIZE_128KB 128 -#define CNFG_SIZE_256KB 256 -#define ROM_DISABLE 0x0 - -#define CNFG_SLOT_ENABLE_BIT 0x08 - -#define CNFG_POS_CONTROL_REG 0x096 -#define CNFG_POS_REG0 0x100 -#define CNFG_POS_REG1 0x101 -#define CNFG_POS_REG2 0x102 -#define CNFG_POS_REG3 0x103 -#define CNFG_POS_REG4 0x104 -#define CNFG_POS_REG5 0x105 - -#define CNFG_ADAPTER_TYPE_MASK 0x0e - -#define SLOT_16BIT 0x0008 -#define INTERFACE_5X3_CHIP 0x0000 /* 0000 = 583 or 593 chips */ -#define NIC_690_BIT 0x0010 /* NIC is 690 */ -#define ALTERNATE_IRQ_BIT 0x0020 /* Alternate IRQ is used */ -#define INTERFACE_584_CHIP 0x0040 /* 0001 = 584 chip */ -#define INTERFACE_594_CHIP 0x0080 /* 0010 = 594 chip */ -#define INTERFACE_585_CHIP 0x0100 /* 0100 = 585/790 chip */ -#define INTERFACE_CHIP_MASK 0x03C0 /* Isolates Intfc Chip Type */ - -#define BOARD_16BIT 0x0040 -#define NODE_ADDR_CKSUM 0xEE -#define BRD_ID_8115T 0x04 - -#define NIC_825_BIT 0x0400 /* TRC 83C825 NIC */ -#define NIC_790_BIT 0x0800 /* NIC is 83C790 Ethernet */ - -#define CHIP_REV_MASK 0x3000 - -#define HWR_CBUSY 0x02 -#define HWR_CA 0x01 - -#define MAC_QUEUE 0 -#define NON_MAC_QUEUE 1 -#define BUG_QUEUE 2 /* NO RECEIVE QUEUE, ONLY TX */ - -#define NUM_MAC_TX_FCBS 8 -#define NUM_MAC_TX_BDBS NUM_MAC_TX_FCBS -#define NUM_MAC_RX_FCBS 7 -#define NUM_MAC_RX_BDBS 8 - -#define NUM_NON_MAC_TX_FCBS 6 -#define NUM_NON_MAC_TX_BDBS NUM_NON_MAC_TX_FCBS - -#define NUM_NON_MAC_RX_BDBS 0 /* CALCULATED DYNAMICALLY */ - -#define NUM_BUG_TX_FCBS 8 -#define NUM_BUG_TX_BDBS NUM_BUG_TX_FCBS - -#define MAC_TX_BUFFER_MEMORY 1024 -#define NON_MAC_TX_BUFFER_MEMORY (20 * 1024) -#define BUG_TX_BUFFER_MEMORY (NUM_BUG_TX_FCBS * 32) - -#define RX_BUFFER_MEMORY 0 /* CALCULATED DYNAMICALLY */ -#define RX_DATA_BUFFER_SIZE 256 -#define RX_BDB_SIZE_SHIFT 3 /* log2(RX_DATA_BUFFER_SIZE)-log2(sizeof(BDBlock)) */ -#define RX_BDB_SIZE_MASK (sizeof(BDBlock) - 1) -#define RX_DATA_BUFFER_SIZE_MASK (RX_DATA_BUFFER_SIZE-1) - -#define NUM_OF_INTERRUPTS 0x20 - -#define NOT_TRANSMITING 0 -#define TRANSMITING 1 - -#define TRC_INTERRUPT_ENABLE_MASK 0x7FF6 - -#define UCODE_VERSION 0x58 - -#define UCODE_SIZE_OFFSET 0x0000 /* WORD */ -#define UCODE_CHECKSUM_OFFSET 0x0002 /* WORD */ -#define UCODE_VERSION_OFFSET 0x0004 /* BYTE */ - -#define CS_RAM_SIZE 0X2000 -#define CS_RAM_CHECKSUM_OFFSET 0x1FFE /* WORD 1FFE(MSB)-1FFF(LSB)*/ -#define CS_RAM_VERSION_OFFSET 0x1FFC /* WORD 1FFC(MSB)-1FFD(LSB)*/ - -#define MISC_DATA_SIZE 128 -#define NUM_OF_ACBS 1 - -#define ACB_COMMAND_NOT_DONE 0x0000 /* Init, command not done */ -#define ACB_COMMAND_DONE 0x8000 /* TRC says command done */ -#define ACB_COMMAND_STATUS_MASK 0x00FF /* low byte is status */ -#define ACB_COMMAND_SUCCESSFUL 0x0000 /* means cmd was successful */ -#define ACB_NOT_CHAIN_END 0x0000 /* tell TRC more CBs in chain */ -#define ACB_CHAIN_END 0x8000 /* tell TRC last CB in chain */ -#define ACB_COMMAND_NO_INTERRUPT 0x0000 /* tell TRC no INT after CB */ -#define ACB_COMMAND_INTERRUPT 0x2000 /* tell TRC to INT after CB */ -#define ACB_SUB_CMD_NOP 0x0000 -#define ACB_CMD_HIC_NOP 0x0080 -#define ACB_CMD_MCT_NOP 0x0000 -#define ACB_CMD_MCT_TEST 0x0001 -#define ACB_CMD_HIC_TEST 0x0081 -#define ACB_CMD_INSERT 0x0002 -#define ACB_CMD_REMOVE 0x0003 -#define ACB_CMD_MCT_WRITE_VALUE 0x0004 -#define ACB_CMD_HIC_WRITE_VALUE 0x0084 -#define ACB_CMD_MCT_READ_VALUE 0x0005 -#define ACB_CMD_HIC_READ_VALUE 0x0085 -#define ACB_CMD_INIT_TX_RX 0x0086 -#define ACB_CMD_INIT_TRC_TIMERS 0x0006 -#define ACB_CMD_READ_TRC_STATUS 0x0007 -#define ACB_CMD_CHANGE_JOIN_STATE 0x0008 -#define ACB_CMD_RESERVED_9 0x0009 -#define ACB_CMD_RESERVED_A 0x000A -#define ACB_CMD_RESERVED_B 0x000B -#define ACB_CMD_RESERVED_C 0x000C -#define ACB_CMD_RESERVED_D 0x000D -#define ACB_CMD_RESERVED_E 0x000E -#define ACB_CMD_RESERVED_F 0x000F - -#define TRC_MAC_REGISTERS_TEST 0x0000 -#define TRC_INTERNAL_LOOPBACK 0x0001 -#define TRC_TRI_LOOPBACK 0x0002 -#define TRC_INTERNAL_ROM_TEST 0x0003 -#define TRC_LOBE_MEDIA_TEST 0x0004 -#define TRC_ANALOG_TEST 0x0005 -#define TRC_HOST_INTERFACE_REG_TEST 0x0003 - -#define TEST_DMA_1 0x0000 -#define TEST_DMA_2 0x0001 -#define TEST_MCT_ROM 0x0002 -#define HIC_INTERNAL_DIAG 0x0003 - -#define ABORT_TRANSMIT_PRIORITY_0 0x0001 -#define ABORT_TRANSMIT_PRIORITY_1 0x0002 -#define ABORT_TRANSMIT_PRIORITY_2 0x0004 -#define ABORT_TRANSMIT_PRIORITY_3 0x0008 -#define ABORT_TRANSMIT_PRIORITY_4 0x0010 -#define ABORT_TRANSMIT_PRIORITY_5 0x0020 -#define ABORT_TRANSMIT_PRIORITY_6 0x0040 -#define ABORT_TRANSMIT_PRIORITY_7 0x0080 - -#define TX_PENDING_PRIORITY_0 0x0001 -#define TX_PENDING_PRIORITY_1 0x0002 -#define TX_PENDING_PRIORITY_2 0x0004 -#define TX_PENDING_PRIORITY_3 0x0008 -#define TX_PENDING_PRIORITY_4 0x0010 -#define TX_PENDING_PRIORITY_5 0x0020 -#define TX_PENDING_PRIORITY_6 0x0040 -#define TX_PENDING_PRIORITY_7 0x0080 - -#define FCB_FRAME_LENGTH 0x100 -#define FCB_COMMAND_DONE 0x8000 /* FCB Word 0 */ -#define FCB_NOT_CHAIN_END 0x0000 /* FCB Word 1 */ -#define FCB_CHAIN_END 0x8000 -#define FCB_NO_WARNING 0x0000 -#define FCB_WARNING 0x4000 -#define FCB_INTERRUPT_DISABLE 0x0000 -#define FCB_INTERRUPT_ENABLE 0x2000 - -#define FCB_ENABLE_IMA 0x0008 -#define FCB_ENABLE_TES 0x0004 /* Guarantee Tx before Int */ -#define FCB_ENABLE_TFS 0x0002 /* Post Tx Frame Status */ -#define FCB_ENABLE_NTC 0x0001 /* No Tx CRC */ - -#define FCB_TX_STATUS_CR2 0x0004 -#define FCB_TX_STATUS_AR2 0x0008 -#define FCB_TX_STATUS_CR1 0x0040 -#define FCB_TX_STATUS_AR1 0x0080 -#define FCB_TX_AC_BITS (FCB_TX_STATUS_AR1+FCB_TX_STATUS_AR2+FCB_TX_STATUS_CR1+FCB_TX_STATUS_CR2) -#define FCB_TX_STATUS_E 0x0100 - -#define FCB_RX_STATUS_ANY_ERROR 0x0001 -#define FCB_RX_STATUS_FCS_ERROR 0x0002 - -#define FCB_RX_STATUS_IA_MATCHED 0x0400 -#define FCB_RX_STATUS_IGA_BSGA_MATCHED 0x0500 -#define FCB_RX_STATUS_FA_MATCHED 0x0600 -#define FCB_RX_STATUS_BA_MATCHED 0x0700 -#define FCB_RX_STATUS_DA_MATCHED 0x0400 -#define FCB_RX_STATUS_SOURCE_ROUTING 0x0800 - -#define BDB_BUFFER_SIZE 0x100 -#define BDB_NOT_CHAIN_END 0x0000 -#define BDB_CHAIN_END 0x8000 -#define BDB_NO_WARNING 0x0000 -#define BDB_WARNING 0x4000 - -#define ERROR_COUNTERS_CHANGED 0x0001 -#define TI_NDIS_RING_STATUS_CHANGED 0x0002 -#define UNA_CHANGED 0x0004 -#define READY_TO_SEND_RQ_INIT 0x0008 - -#define SCGB_ADDRESS_POINTER_FORMAT INTEL_ADDRESS_POINTER_FORMAT -#define SCGB_DATA_FORMAT INTEL_DATA_FORMAT -#define SCGB_MULTI_WORD_CONTROL 0 -#define SCGB_BURST_LENGTH 0x000E /* DMA Burst Length */ - -#define SCGB_CONFIG (INTEL_ADDRESS_POINTER_FORMAT+INTEL_DATA_FORMAT+SCGB_BURST_LENGTH) - -#define ISCP_BLOCK_SIZE 0x0A -#define RAM_SIZE 0x10000 -#define INIT_SYS_CONFIG_PTR_OFFSET (RAM_SIZE-ISCP_BLOCK_SIZE) -#define SCGP_BLOCK_OFFSET 0 - -#define SCLB_NOT_VALID 0x0000 /* Initially, SCLB not valid */ -#define SCLB_VALID 0x8000 /* Host tells TRC SCLB valid */ -#define SCLB_PROCESSED 0x0000 /* TRC says SCLB processed */ -#define SCLB_RESUME_CONTROL_NOT_VALID 0x0000 /* Initially, RC not valid */ -#define SCLB_RESUME_CONTROL_VALID 0x4000 /* Host tells TRC RC valid */ -#define SCLB_IACK_CODE_NOT_VALID 0x0000 /* Initially, IACK not valid */ -#define SCLB_IACK_CODE_VALID 0x2000 /* Host tells TRC IACK valid */ -#define SCLB_CMD_NOP 0x0000 -#define SCLB_CMD_REMOVE 0x0001 -#define SCLB_CMD_SUSPEND_ACB_CHAIN 0x0002 -#define SCLB_CMD_SET_INTERRUPT_MASK 0x0003 -#define SCLB_CMD_CLEAR_INTERRUPT_MASK 0x0004 -#define SCLB_CMD_RESERVED_5 0x0005 -#define SCLB_CMD_RESERVED_6 0x0006 -#define SCLB_CMD_RESERVED_7 0x0007 -#define SCLB_CMD_RESERVED_8 0x0008 -#define SCLB_CMD_RESERVED_9 0x0009 -#define SCLB_CMD_RESERVED_A 0x000A -#define SCLB_CMD_RESERVED_B 0x000B -#define SCLB_CMD_RESERVED_C 0x000C -#define SCLB_CMD_RESERVED_D 0x000D -#define SCLB_CMD_RESERVED_E 0x000E -#define SCLB_CMD_RESERVED_F 0x000F - -#define SCLB_RC_ACB 0x0001 /* Action Command Block Chain */ -#define SCLB_RC_RES0 0x0002 /* Always Zero */ -#define SCLB_RC_RES1 0x0004 /* Always Zero */ -#define SCLB_RC_RES2 0x0008 /* Always Zero */ -#define SCLB_RC_RX_MAC_FCB 0x0010 /* RX_MAC_FCB Chain */ -#define SCLB_RC_RX_MAC_BDB 0x0020 /* RX_MAC_BDB Chain */ -#define SCLB_RC_RX_NON_MAC_FCB 0x0040 /* RX_NON_MAC_FCB Chain */ -#define SCLB_RC_RX_NON_MAC_BDB 0x0080 /* RX_NON_MAC_BDB Chain */ -#define SCLB_RC_TFCB0 0x0100 /* TX Priority 0 FCB Chain */ -#define SCLB_RC_TFCB1 0x0200 /* TX Priority 1 FCB Chain */ -#define SCLB_RC_TFCB2 0x0400 /* TX Priority 2 FCB Chain */ -#define SCLB_RC_TFCB3 0x0800 /* TX Priority 3 FCB Chain */ -#define SCLB_RC_TFCB4 0x1000 /* TX Priority 4 FCB Chain */ -#define SCLB_RC_TFCB5 0x2000 /* TX Priority 5 FCB Chain */ -#define SCLB_RC_TFCB6 0x4000 /* TX Priority 6 FCB Chain */ -#define SCLB_RC_TFCB7 0x8000 /* TX Priority 7 FCB Chain */ - -#define SCLB_IMC_RES0 0x0001 /* */ -#define SCLB_IMC_MAC_TYPE_3 0x0002 /* MAC_ARC_INDICATE */ -#define SCLB_IMC_MAC_ERROR_COUNTERS 0x0004 /* */ -#define SCLB_IMC_RES1 0x0008 /* */ -#define SCLB_IMC_MAC_TYPE_2 0x0010 /* QUE_MAC_INDICATE */ -#define SCLB_IMC_TX_FRAME 0x0020 /* */ -#define SCLB_IMC_END_OF_TX_QUEUE 0x0040 /* */ -#define SCLB_IMC_NON_MAC_RX_RESOURCE 0x0080 /* */ -#define SCLB_IMC_MAC_RX_RESOURCE 0x0100 /* */ -#define SCLB_IMC_NON_MAC_RX_FRAME 0x0200 /* */ -#define SCLB_IMC_MAC_RX_FRAME 0x0400 /* */ -#define SCLB_IMC_TRC_FIFO_STATUS 0x0800 /* */ -#define SCLB_IMC_COMMAND_STATUS 0x1000 /* */ -#define SCLB_IMC_MAC_TYPE_1 0x2000 /* Self Removed */ -#define SCLB_IMC_TRC_INTRNL_TST_STATUS 0x4000 /* */ -#define SCLB_IMC_RES2 0x8000 /* */ - -#define DMA_TRIGGER 0x0004 -#define FREQ_16MB_BIT 0x0010 -#define THDREN 0x0020 -#define CFG0_RSV1 0x0040 -#define CFG0_RSV2 0x0080 -#define ETREN 0x0100 -#define RX_OWN_BIT 0x0200 -#define RXATMAC 0x0400 -#define PROMISCUOUS_BIT 0x0800 -#define USETPT 0x1000 -#define SAVBAD_BIT 0x2000 -#define ONEQUE 0x4000 -#define NO_AUTOREMOVE 0x8000 - -#define RX_FCB_AREA_8316 0x00000000 -#define RX_BUFF_AREA_8316 0x00000000 - -#define TRC_POINTER(X) ((unsigned long)(X) - tp->ram_access) -#define RX_FCB_TRC_POINTER(X) ((unsigned long)(X) - tp->ram_access + RX_FCB_AREA_8316) -#define RX_BUFF_TRC_POINTER(X) ((unsigned long)(X) - tp->ram_access + RX_BUFF_AREA_8316) - -// Offset 0: MSR - Memory Select Register -// -#define r587_MSR 0x000 // Register Offset -//#define MSR_RST 0x080 // LAN Controller Reset -#define MSR_MENB 0x040 // Shared Memory Enable -#define MSR_RA18 0x020 // Ram Address bit 18 (583, 584, 587) -#define MSR_RA17 0x010 // Ram Address bit 17 (583, 584, 585/790) -#define MSR_RA16 0x008 // Ram Address bit 16 (583, 584, 585/790) -#define MSR_RA15 0x004 // Ram Address bit 15 (583, 584, 585/790) -#define MSR_RA14 0x002 // Ram Address bit 14 (583, 584, 585/790) -#define MSR_RA13 0x001 // Ram Address bit 13 (583, 584, 585/790) - -#define MSR_MASK 0x03F // Mask for Address bits RA18-RA13 (583, 584, 587) - -#define MSR 0x00 -#define IRR 0x04 -#define HWR 0x04 -#define LAAR 0x05 -#define IMCCR 0x05 -#define LAR0 0x08 -#define BDID 0x0E // Adapter ID byte register offset -#define CSR 0x10 -#define PR 0x11 - -#define MSR_RST 0x80 -#define MSR_MEMB 0x40 -#define MSR_0WS 0x20 - -#define FORCED_16BIT_MODE 0x0002 - -#define INTERFRAME_SPACING_16 0x0003 /* 6 bytes */ -#define INTERFRAME_SPACING_4 0x0001 /* 2 bytes */ -#define MULTICAST_ADDRESS_BIT 0x0010 -#define NON_SRC_ROUTING_BIT 0x0020 - -#define LOOPING_MODE_MASK 0x0007 - -/* - * Decode firmware defines. - */ -#define SWAP_BYTES(X) ((X & 0xff) << 8) | (X >> 8) -#define WEIGHT_OFFSET 5 -#define TREE_SIZE_OFFSET 9 -#define TREE_OFFSET 11 - -/* The Huffman Encoding Tree is constructed of these nodes. */ -typedef struct { - __u8 llink; /* Short version of above node. */ - __u8 tag; - __u8 info; /* This node is used on decodes. */ - __u8 rlink; -} DECODE_TREE_NODE; - -#define ROOT 0 /* Branch value. */ -#define LEAF 0 /* Tag field value. */ -#define BRANCH 1 /* Tag field value. */ - -/* - * Multicast Table Structure - */ -typedef struct { - __u8 address[6]; - __u8 instance_count; -} McTable; - -/* - * Fragment Descriptor Definition - */ -typedef struct { - __u8 *fragment_ptr; - __u32 fragment_length; -} FragmentStructure; - -/* - * Data Buffer Structure Definition - */ -typedef struct { - __u32 fragment_count; - FragmentStructure fragment_list[MAXFRAGMENTS]; -} DataBufferStructure; - -#pragma pack(1) -typedef struct { - __u8 IType; - __u8 ISubtype; -} Interrupt_Status_Word; - -#pragma pack(1) -typedef struct BDBlockType { - __u16 info; /* 02 */ - __u32 trc_next_ptr; /* 06 */ - __u32 trc_data_block_ptr; /* 10 */ - __u16 buffer_length; /* 12 */ - - __u16 *data_block_ptr; /* 16 */ - struct BDBlockType *next_ptr; /* 20 */ - struct BDBlockType *back_ptr; /* 24 */ - __u8 filler[8]; /* 32 */ -} BDBlock; - -#pragma pack(1) -typedef struct FCBlockType { - __u16 frame_status; /* 02 */ - __u16 info; /* 04 */ - __u32 trc_next_ptr; /* 08 */ - __u32 trc_bdb_ptr; /* 12 */ - __u16 frame_length; /* 14 */ - - BDBlock *bdb_ptr; /* 18 */ - struct FCBlockType *next_ptr; /* 22 */ - struct FCBlockType *back_ptr; /* 26 */ - __u16 memory_alloc; /* 28 */ - __u8 filler[4]; /* 32 */ - -} FCBlock; - -#pragma pack(1) -typedef struct SBlockType{ - __u8 Internal_Error_Count; - __u8 Line_Error_Count; - __u8 AC_Error_Count; - __u8 Burst_Error_Count; - __u8 RESERVED_COUNTER_0; - __u8 AD_TRANS_Count; - __u8 RCV_Congestion_Count; - __u8 Lost_FR_Error_Count; - __u8 FREQ_Error_Count; - __u8 FR_Copied_Error_Count; - __u8 RESERVED_COUNTER_1; - __u8 Token_Error_Count; - - __u16 TI_NDIS_Ring_Status; - __u16 BCN_Type; - __u16 Error_Code; - __u16 SA_of_Last_AMP_SMP[3]; - __u16 UNA[3]; - __u16 Ucode_Version_Number; - __u16 Status_CHG_Indicate; - __u16 RESERVED_STATUS_0; -} SBlock; - -#pragma pack(1) -typedef struct ACBlockType { - __u16 cmd_done_status; /* 02 */ - __u16 cmd_info; /* 04 */ - __u32 trc_next_ptr; /* 08 */ - __u16 cmd; /* 10 */ - __u16 subcmd; /* 12 */ - __u16 data_offset_lo; /* 14 */ - __u16 data_offset_hi; /* 16 */ - - struct ACBlockType *next_ptr; /* 20 */ - - __u8 filler[12]; /* 32 */ -} ACBlock; - -#define NUM_OF_INTERRUPTS 0x20 - -#pragma pack(1) -typedef struct { - Interrupt_Status_Word IStatus[NUM_OF_INTERRUPTS]; -} ISBlock; - -#pragma pack(1) -typedef struct { - __u16 valid_command; /* 02 */ - __u16 iack_code; /* 04 */ - __u16 resume_control; /* 06 */ - __u16 int_mask_control; /* 08 */ - __u16 int_mask_state; /* 10 */ - - __u8 filler[6]; /* 16 */ -} SCLBlock; - -#pragma pack(1) -typedef struct -{ - __u16 config; /* 02 */ - __u32 trc_sclb_ptr; /* 06 */ - __u32 trc_acb_ptr; /* 10 */ - __u32 trc_isb_ptr; /* 14 */ - __u16 isbsiz; /* 16 */ - - SCLBlock *sclb_ptr; /* 20 */ - ACBlock *acb_ptr; /* 24 */ - ISBlock *isb_ptr; /* 28 */ - - __u16 Non_Mac_Rx_Bdbs; /* 30 DEBUG */ - __u8 filler[2]; /* 32 */ - -} SCGBlock; - -#pragma pack(1) -typedef struct -{ - __u32 trc_scgb_ptr; - SCGBlock *scgb_ptr; -} ISCPBlock; -#pragma pack() - -typedef struct net_local { - ISCPBlock *iscpb_ptr; - SCGBlock *scgb_ptr; - SCLBlock *sclb_ptr; - ISBlock *isb_ptr; - - ACBlock *acb_head; - ACBlock *acb_curr; - ACBlock *acb_next; - - __u8 adapter_name[12]; - - __u16 num_rx_bdbs [NUM_RX_QS_USED]; - __u16 num_rx_fcbs [NUM_RX_QS_USED]; - - __u16 num_tx_bdbs [NUM_TX_QS_USED]; - __u16 num_tx_fcbs [NUM_TX_QS_USED]; - - __u16 num_of_tx_buffs; - - __u16 tx_buff_size [NUM_TX_QS_USED]; - __u16 tx_buff_used [NUM_TX_QS_USED]; - __u16 tx_queue_status [NUM_TX_QS_USED]; - - FCBlock *tx_fcb_head[NUM_TX_QS_USED]; - FCBlock *tx_fcb_curr[NUM_TX_QS_USED]; - FCBlock *tx_fcb_end[NUM_TX_QS_USED]; - BDBlock *tx_bdb_head[NUM_TX_QS_USED]; - __u16 *tx_buff_head[NUM_TX_QS_USED]; - __u16 *tx_buff_end[NUM_TX_QS_USED]; - __u16 *tx_buff_curr[NUM_TX_QS_USED]; - __u16 num_tx_fcbs_used[NUM_TX_QS_USED]; - - FCBlock *rx_fcb_head[NUM_RX_QS_USED]; - FCBlock *rx_fcb_curr[NUM_RX_QS_USED]; - BDBlock *rx_bdb_head[NUM_RX_QS_USED]; - BDBlock *rx_bdb_curr[NUM_RX_QS_USED]; - BDBlock *rx_bdb_end[NUM_RX_QS_USED]; - __u16 *rx_buff_head[NUM_RX_QS_USED]; - __u16 *rx_buff_end[NUM_RX_QS_USED]; - - __u32 *ptr_local_ring_num; - - __u32 sh_mem_used; - - __u16 page_offset_mask; - - __u16 authorized_function_classes; - __u16 authorized_access_priority; - - __u16 num_acbs; - __u16 num_acbs_used; - __u16 acb_pending; - - __u16 current_isb_index; - - __u8 monitor_state; - __u8 monitor_state_ready; - __u16 ring_status; - __u8 ring_status_flags; - __u8 state; - - __u8 join_state; - - __u8 slot_num; - __u16 pos_id; - - __u32 *ptr_una; - __u32 *ptr_bcn_type; - __u32 *ptr_tx_fifo_underruns; - __u32 *ptr_rx_fifo_underruns; - __u32 *ptr_rx_fifo_overruns; - __u32 *ptr_tx_fifo_overruns; - __u32 *ptr_tx_fcb_overruns; - __u32 *ptr_rx_fcb_overruns; - __u32 *ptr_tx_bdb_overruns; - __u32 *ptr_rx_bdb_overruns; - - __u16 receive_queue_number; - - __u8 rx_fifo_overrun_count; - __u8 tx_fifo_overrun_count; - - __u16 adapter_flags; - __u16 adapter_flags1; - __u16 *misc_command_data; - __u16 max_packet_size; - - __u16 config_word0; - __u16 config_word1; - - __u8 trc_mask; - - __u16 source_ring_number; - __u16 target_ring_number; - - __u16 microcode_version; - - __u16 bic_type; - __u16 nic_type; - __u16 board_id; - - __u16 rom_size; - __u32 rom_base; - __u16 ram_size; - __u16 ram_usable; - __u32 ram_base; - __u32 ram_access; - - __u16 extra_info; - __u16 mode_bits; - __u16 media_menu; - __u16 media_type; - __u16 adapter_bus; - - __u16 status; - __u16 receive_mask; - - __u16 group_address_0; - __u16 group_address[2]; - __u16 functional_address_0; - __u16 functional_address[2]; - __u16 bitwise_group_address[2]; - - __u8 cleanup; - - struct sk_buff_head SendSkbQueue; - __u16 QueueSkb; - - struct tr_statistics MacStat; /* MAC statistics structure */ - - spinlock_t lock; -} NET_LOCAL; - -/************************************ - * SNMP-ON-BOARD Agent Link Structure - ************************************/ - -typedef struct { - __u8 LnkSigStr[12]; /* signature string "SmcLinkTable" */ - __u8 LnkDrvTyp; /* 1=Redbox ODI, 2=ODI DOS, 3=ODI OS/2, 4=NDIS DOS */ - __u8 LnkFlg; /* 0 if no agent linked, 1 if agent linked */ - void *LnkNfo; /* routine which returns pointer to NIC info */ - void *LnkAgtRcv; /* pointer to agent receive trap entry */ - void *LnkAgtXmt; /* pointer to agent transmit trap -entry */ -void *LnkGet; /* pointer to NIC receive data -copy routine */ - void *LnkSnd; /* pointer to NIC send routine -*/ - void *LnkRst; /* pointer to NIC driver reset -routine */ - void *LnkMib; /* pointer to MIB data base */ - void *LnkMibAct; /* pointer to MIB action routine list */ - __u16 LnkCntOffset; /* offset to error counters */ - __u16 LnkCntNum; /* number of error counters */ - __u16 LnkCntSize; /* size of error counters i.e. 32 = 32 bits */ - void *LnkISR; /* pointer to interrupt vector */ - __u8 LnkFrmTyp; /* 1=Ethernet, 2=Token Ring */ - __u8 LnkDrvVer1 ; /* driver major version */ - __u8 LnkDrvVer2 ; /* driver minor version */ -} AgentLink; - -/* - * Definitions for pcm_card_flags(bit_mapped) - */ -#define REG_COMPLETE 0x0001 -#define INSERTED 0x0002 -#define PCC_INSERTED 0x0004 /* 1=currently inserted, 0=cur removed */ - -/* - * Adapter RAM test patterns - */ -#define RAM_PATTERN_1 0x55AA -#define RAM_PATTERN_2 0x9249 -#define RAM_PATTERN_3 0xDB6D - -/* - * definitions for RAM test - */ -#define ROM_SIGNATURE 0xAA55 -#define MIN_ROM_SIZE 0x2000 - -/* - * Return Codes - */ -#define SUCCESS 0x0000 -#define ADAPTER_AND_CONFIG 0x0001 -#define ADAPTER_NO_CONFIG 0x0002 -#define NOT_MY_INTERRUPT 0x0003 -#define FRAME_REJECTED 0x0004 -#define EVENTS_DISABLED 0x0005 -#define OUT_OF_RESOURCES 0x0006 -#define INVALID_PARAMETER 0x0007 -#define INVALID_FUNCTION 0x0008 -#define INITIALIZE_FAILED 0x0009 -#define CLOSE_FAILED 0x000A -#define MAX_COLLISIONS 0x000B -#define NO_SUCH_DESTINATION 0x000C -#define BUFFER_TOO_SMALL_ERROR 0x000D -#define ADAPTER_CLOSED 0x000E -#define UCODE_NOT_PRESENT 0x000F -#define FIFO_UNDERRUN 0x0010 -#define DEST_OUT_OF_RESOURCES 0x0011 -#define ADAPTER_NOT_INITIALIZED 0x0012 -#define PENDING 0x0013 -#define UCODE_PRESENT 0x0014 -#define NOT_INIT_BY_BRIDGE 0x0015 - -#define OPEN_FAILED 0x0080 -#define HARDWARE_FAILED 0x0081 -#define SELF_TEST_FAILED 0x0082 -#define RAM_TEST_FAILED 0x0083 -#define RAM_CONFLICT 0x0084 -#define ROM_CONFLICT 0x0085 -#define UNKNOWN_ADAPTER 0x0086 -#define CONFIG_ERROR 0x0087 -#define CONFIG_WARNING 0x0088 -#define NO_FIXED_CNFG 0x0089 -#define EEROM_CKSUM_ERROR 0x008A -#define ROM_SIGNATURE_ERROR 0x008B -#define ROM_CHECKSUM_ERROR 0x008C -#define ROM_SIZE_ERROR 0x008D -#define UNSUPPORTED_NIC_CHIP 0x008E -#define NIC_REG_ERROR 0x008F -#define BIC_REG_ERROR 0x0090 -#define MICROCODE_TEST_ERROR 0x0091 -#define LOBE_MEDIA_TEST_FAILED 0x0092 - -#define ADAPTER_FOUND_LAN_CORRUPT 0x009B - -#define ADAPTER_NOT_FOUND 0xFFFF - -#define ILLEGAL_FUNCTION INVALID_FUNCTION - -/* Errors */ -#define IO_BASE_INVALID 0x0001 -#define IO_BASE_RANGE 0x0002 -#define IRQ_INVALID 0x0004 -#define IRQ_RANGE 0x0008 -#define RAM_BASE_INVALID 0x0010 -#define RAM_BASE_RANGE 0x0020 -#define RAM_SIZE_RANGE 0x0040 -#define MEDIA_INVALID 0x0800 - -/* Warnings */ -#define IRQ_MISMATCH 0x0080 -#define RAM_BASE_MISMATCH 0x0100 -#define RAM_SIZE_MISMATCH 0x0200 -#define BUS_MODE_MISMATCH 0x0400 - -#define RX_CRC_ERROR 0x01 -#define RX_ALIGNMENT_ERROR 0x02 -#define RX_HW_FAILED 0x80 - -/* - * Definitions for the field RING_STATUS_FLAGS - */ -#define RING_STATUS_CHANGED 0X01 -#define MONITOR_STATE_CHANGED 0X02 -#define JOIN_STATE_CHANGED 0X04 - -/* - * Definitions for the field JOIN_STATE - */ -#define JS_BYPASS_STATE 0x00 -#define JS_LOBE_TEST_STATE 0x01 -#define JS_DETECT_MONITOR_PRESENT_STATE 0x02 -#define JS_AWAIT_NEW_MONITOR_STATE 0x03 -#define JS_DUPLICATE_ADDRESS_TEST_STATE 0x04 -#define JS_NEIGHBOR_NOTIFICATION_STATE 0x05 -#define JS_REQUEST_INITIALIZATION_STATE 0x06 -#define JS_JOIN_COMPLETE_STATE 0x07 -#define JS_BYPASS_WAIT_STATE 0x08 - -/* - * Definitions for the field MONITOR_STATE - */ -#define MS_MONITOR_FSM_INACTIVE 0x00 -#define MS_REPEAT_BEACON_STATE 0x01 -#define MS_REPEAT_CLAIM_TOKEN_STATE 0x02 -#define MS_TRANSMIT_CLAIM_TOKEN_STATE 0x03 -#define MS_STANDBY_MONITOR_STATE 0x04 -#define MS_TRANSMIT_BEACON_STATE 0x05 -#define MS_ACTIVE_MONITOR_STATE 0x06 -#define MS_TRANSMIT_RING_PURGE_STATE 0x07 -#define MS_BEACON_TEST_STATE 0x09 - -/* - * Definitions for the bit-field RING_STATUS - */ -#define SIGNAL_LOSS 0x8000 -#define HARD_ERROR 0x4000 -#define SOFT_ERROR 0x2000 -#define TRANSMIT_BEACON 0x1000 -#define LOBE_WIRE_FAULT 0x0800 -#define AUTO_REMOVAL_ERROR 0x0400 -#define REMOVE_RECEIVED 0x0100 -#define COUNTER_OVERFLOW 0x0080 -#define SINGLE_STATION 0x0040 -#define RING_RECOVERY 0x0020 - -/* - * Definitions for the field BUS_TYPE - */ -#define AT_BUS 0x00 -#define MCA_BUS 0x01 -#define EISA_BUS 0x02 -#define PCI_BUS 0x03 -#define PCMCIA_BUS 0x04 - -/* - * Definitions for adapter_flags - */ -#define RX_VALID_LOOKAHEAD 0x0001 -#define FORCED_16BIT_MODE 0x0002 -#define ADAPTER_DISABLED 0x0004 -#define TRANSMIT_CHAIN_INT 0x0008 -#define EARLY_RX_FRAME 0x0010 -#define EARLY_TX 0x0020 -#define EARLY_RX_COPY 0x0040 -#define USES_PHYSICAL_ADDR 0x0080 /* Rsvd for DEC PCI and 9232 */ -#define NEEDS_PHYSICAL_ADDR 0x0100 /* Reserved*/ -#define RX_STATUS_PENDING 0x0200 -#define ERX_DISABLED 0x0400 /* EARLY_RX_ENABLE rcv_mask */ -#define ENABLE_TX_PENDING 0x0800 -#define ENABLE_RX_PENDING 0x1000 -#define PERM_CLOSE 0x2000 -#define IO_MAPPED 0x4000 /* IOmapped bus interface 795 */ -#define ETX_DISABLED 0x8000 - - -/* - * Definitions for adapter_flags1 - */ -#define TX_PHY_RX_VIRT 0x0001 -#define NEEDS_HOST_RAM 0x0002 -#define NEEDS_MEDIA_TYPE 0x0004 -#define EARLY_RX_DONE 0x0008 -#define PNP_BOOT_BIT 0x0010 /* activates PnP & config on power-up */ - /* clear => regular PnP operation */ -#define PNP_ENABLE 0x0020 /* regular PnP operation clear => */ - /* no PnP, overrides PNP_BOOT_BIT */ -#define SATURN_ENABLE 0x0040 - -#define ADAPTER_REMOVABLE 0x0080 /* adapter is hot swappable */ -#define TX_PHY 0x0100 /* Uses physical address for tx bufs */ -#define RX_PHY 0x0200 /* Uses physical address for rx bufs */ -#define TX_VIRT 0x0400 /* Uses virtual addr for tx bufs */ -#define RX_VIRT 0x0800 -#define NEEDS_SERVICE 0x1000 - -/* - * Adapter Status Codes - */ -#define OPEN 0x0001 -#define INITIALIZED 0x0002 -#define CLOSED 0x0003 -#define FAILED 0x0005 -#define NOT_INITIALIZED 0x0006 -#define IO_CONFLICT 0x0007 -#define CARD_REMOVED 0x0008 -#define CARD_INSERTED 0x0009 - -/* - * Mode Bit Definitions - */ -#define INTERRUPT_STATUS_BIT 0x8000 /* PC Interrupt Line: 0 = Not Enabled */ -#define BOOT_STATUS_MASK 0x6000 /* Mask to isolate BOOT_STATUS */ -#define BOOT_INHIBIT 0x0000 /* BOOT_STATUS is 'inhibited' */ -#define BOOT_TYPE_1 0x2000 /* Unused BOOT_STATUS value */ -#define BOOT_TYPE_2 0x4000 /* Unused BOOT_STATUS value */ -#define BOOT_TYPE_3 0x6000 /* Unused BOOT_STATUS value */ -#define ZERO_WAIT_STATE_MASK 0x1800 /* Mask to isolate Wait State flags */ -#define ZERO_WAIT_STATE_8_BIT 0x1000 /* 0 = Disabled (Inserts Wait States) */ -#define ZERO_WAIT_STATE_16_BIT 0x0800 /* 0 = Disabled (Inserts Wait States) */ -#define LOOPING_MODE_MASK 0x0007 -#define LOOPBACK_MODE_0 0x0000 -#define LOOPBACK_MODE_1 0x0001 -#define LOOPBACK_MODE_2 0x0002 -#define LOOPBACK_MODE_3 0x0003 -#define LOOPBACK_MODE_4 0x0004 -#define LOOPBACK_MODE_5 0x0005 -#define LOOPBACK_MODE_6 0x0006 -#define LOOPBACK_MODE_7 0x0007 -#define AUTO_MEDIA_DETECT 0x0008 -#define MANUAL_CRC 0x0010 -#define EARLY_TOKEN_REL 0x0020 /* Early Token Release for Token Ring */ -#define UMAC 0x0040 -#define UTP2_PORT 0x0080 /* For 8216T2, 0=port A, 1=Port B. */ -#define BNC_10BT_INTERFACE 0x0600 /* BNC and UTP current media set */ -#define UTP_INTERFACE 0x0500 /* Ethernet UTP Only. */ -#define BNC_INTERFACE 0x0400 -#define AUI_INTERFACE 0x0300 -#define AUI_10BT_INTERFACE 0x0200 -#define STARLAN_10_INTERFACE 0x0100 -#define INTERFACE_TYPE_MASK 0x0700 - -/* - * Media Type Bit Definitions - * - * legend: TP = Twisted Pair - * STP = Shielded twisted pair - * UTP = Unshielded twisted pair - */ - -#define CNFG_MEDIA_TYPE_MASK 0x001e /* POS Register 3 Mask */ - -#define MEDIA_S10 0x0000 /* Ethernet adapter, TP. */ -#define MEDIA_AUI_UTP 0x0001 /* Ethernet adapter, AUI/UTP media */ -#define MEDIA_BNC 0x0002 /* Ethernet adapter, BNC media. */ -#define MEDIA_AUI 0x0003 /* Ethernet Adapter, AUI media. */ -#define MEDIA_STP_16 0x0004 /* TokenRing adap, 16Mbit STP. */ -#define MEDIA_STP_4 0x0005 /* TokenRing adap, 4Mbit STP. */ -#define MEDIA_UTP_16 0x0006 /* TokenRing adap, 16Mbit UTP. */ -#define MEDIA_UTP_4 0x0007 /* TokenRing adap, 4Mbit UTP. */ -#define MEDIA_UTP 0x0008 /* Ethernet adapter, UTP media (no AUI) -*/ -#define MEDIA_BNC_UTP 0x0010 /* Ethernet adapter, BNC/UTP media */ -#define MEDIA_UTPFD 0x0011 /* Ethernet adapter, TP full duplex */ -#define MEDIA_UTPNL 0x0012 /* Ethernet adapter, TP with link integrity test disabled */ -#define MEDIA_AUI_BNC 0x0013 /* Ethernet adapter, AUI/BNC media */ -#define MEDIA_AUI_BNC_UTP 0x0014 /* Ethernet adapter, AUI_BNC/UTP */ -#define MEDIA_UTPA 0x0015 /* Ethernet UTP-10Mbps Ports A */ -#define MEDIA_UTPB 0x0016 /* Ethernet UTP-10Mbps Ports B */ -#define MEDIA_STP_16_UTP_16 0x0017 /* Token Ring STP-16Mbps/UTP-16Mbps */ -#define MEDIA_STP_4_UTP_4 0x0018 /* Token Ring STP-4Mbps/UTP-4Mbps */ - -#define MEDIA_STP100_UTP100 0x0020 /* Ethernet STP-100Mbps/UTP-100Mbps */ -#define MEDIA_UTP100FD 0x0021 /* Ethernet UTP-100Mbps, full duplex */ -#define MEDIA_UTP100 0x0022 /* Ethernet UTP-100Mbps */ - - -#define MEDIA_UNKNOWN 0xFFFF /* Unknown adapter/media type */ - -/* - * Definitions for the field: - * media_type2 - */ -#define MEDIA_TYPE_MII 0x0001 -#define MEDIA_TYPE_UTP 0x0002 -#define MEDIA_TYPE_BNC 0x0004 -#define MEDIA_TYPE_AUI 0x0008 -#define MEDIA_TYPE_S10 0x0010 -#define MEDIA_TYPE_AUTO_SENSE 0x1000 -#define MEDIA_TYPE_AUTO_DETECT 0x4000 -#define MEDIA_TYPE_AUTO_NEGOTIATE 0x8000 - -/* - * Definitions for the field: - * line_speed - */ -#define LINE_SPEED_UNKNOWN 0x0000 -#define LINE_SPEED_4 0x0001 -#define LINE_SPEED_10 0x0002 -#define LINE_SPEED_16 0x0004 -#define LINE_SPEED_100 0x0008 -#define LINE_SPEED_T4 0x0008 /* 100BaseT4 aliased for 9332BVT */ -#define LINE_SPEED_FULL_DUPLEX 0x8000 - -/* - * Definitions for the field: - * bic_type (Bus interface chip type) - */ -#define BIC_NO_CHIP 0x0000 /* Bus interface chip not implemented */ -#define BIC_583_CHIP 0x0001 /* 83C583 bus interface chip */ -#define BIC_584_CHIP 0x0002 /* 83C584 bus interface chip */ -#define BIC_585_CHIP 0x0003 /* 83C585 bus interface chip */ -#define BIC_593_CHIP 0x0004 /* 83C593 bus interface chip */ -#define BIC_594_CHIP 0x0005 /* 83C594 bus interface chip */ -#define BIC_564_CHIP 0x0006 /* PCMCIA Bus interface chip */ -#define BIC_790_CHIP 0x0007 /* 83C790 bus i-face/Ethernet NIC chip */ -#define BIC_571_CHIP 0x0008 /* 83C571 EISA bus master i-face */ -#define BIC_587_CHIP 0x0009 /* Token Ring AT bus master i-face */ -#define BIC_574_CHIP 0x0010 /* FEAST bus interface chip */ -#define BIC_8432_CHIP 0x0011 /* 8432 bus i-face/Ethernet NIC(DEC PCI) */ -#define BIC_9332_CHIP 0x0012 /* 9332 bus i-face/100Mbps Ether NIC(DEC PCI) */ -#define BIC_8432E_CHIP 0x0013 /* 8432 Enhanced bus iface/Ethernet NIC(DEC) */ -#define BIC_EPIC100_CHIP 0x0014 /* EPIC/100 10/100 Mbps Ethernet BIC/NIC */ -#define BIC_C94_CHIP 0x0015 /* 91C94 bus i-face in PCMCIA mode */ -#define BIC_X8020_CHIP 0x0016 /* Xilinx PCMCIA multi-func i-face */ - -/* - * Definitions for the field: - * nic_type (Bus interface chip type) - */ -#define NIC_UNK_CHIP 0x0000 /* Unknown NIC chip */ -#define NIC_8390_CHIP 0x0001 /* DP8390 Ethernet NIC */ -#define NIC_690_CHIP 0x0002 /* 83C690 Ethernet NIC */ -#define NIC_825_CHIP 0x0003 /* 83C825 Token Ring NIC */ -/* #define NIC_???_CHIP 0x0004 */ /* Not used */ -/* #define NIC_???_CHIP 0x0005 */ /* Not used */ -/* #define NIC_???_CHIP 0x0006 */ /* Not used */ -#define NIC_790_CHIP 0x0007 /* 83C790 bus i-face/Ethernet NIC chip */ -#define NIC_C100_CHIP 0x0010 /* FEAST 100Mbps Ethernet NIC */ -#define NIC_8432_CHIP 0x0011 /* 8432 bus i-face/Ethernet NIC(DEC PCI) */ -#define NIC_9332_CHIP 0x0012 /* 9332 bus i-face/100Mbps Ether NIC(DEC PCI) */ -#define NIC_8432E_CHIP 0x0013 /* 8432 enhanced bus iface/Ethernet NIC(DEC) */ -#define NIC_EPIC100_CHIP 0x0014 /* EPIC/100 10/100 Mbps Ethernet BIC/NIC */ -#define NIC_C94_CHIP 0x0015 /* 91C94 PC Card with multi func */ - -/* - * Definitions for the field: - * adapter_type The adapter_type field describes the adapter/bus - * configuration. - */ -#define BUS_ISA16_TYPE 0x0001 /* 16 bit adap in 16 bit (E)ISA slot */ -#define BUS_ISA8_TYPE 0x0002 /* 8/16b adap in 8 bit XT/(E)ISA slot */ -#define BUS_MCA_TYPE 0x0003 /* Micro Channel adapter */ - -/* - * Receive Mask definitions - */ -#define ACCEPT_MULTICAST 0x0001 -#define ACCEPT_BROADCAST 0x0002 -#define PROMISCUOUS_MODE 0x0004 -#define ACCEPT_SOURCE_ROUTING 0x0008 -#define ACCEPT_ERR_PACKETS 0x0010 -#define ACCEPT_ATT_MAC_FRAMES 0x0020 -#define ACCEPT_MULTI_PROM 0x0040 -#define TRANSMIT_ONLY 0x0080 -#define ACCEPT_EXT_MAC_FRAMES 0x0100 -#define EARLY_RX_ENABLE 0x0200 -#define PKT_SIZE_NOT_NEEDED 0x0400 -#define ACCEPT_SOURCE_ROUTING_SPANNING 0x0808 - -#define ACCEPT_ALL_MAC_FRAMES 0x0120 - -/* - * config_mode defs - */ -#define STORE_EEROM 0x0001 /* Store config in EEROM. */ -#define STORE_REGS 0x0002 /* Store config in register set. */ - -/* - * equates for lmac_flags in adapter structure (Ethernet) - */ -#define MEM_DISABLE 0x0001 -#define RX_STATUS_POLL 0x0002 -#define USE_RE_BIT 0x0004 -/*#define RESERVED 0x0008 */ -/*#define RESERVED 0x0010 */ -/*#define RESERVED 0x0020 */ -/*#define RESERVED 0x0040 */ -/*#define RESERVED 0x0080 */ -/*#define RESERVED 0x0100 */ -/*#define RESERVED 0x0200 */ -/*#define RESERVED 0x0400 */ -/*#define RESERVED 0x0800 */ -/*#define RESERVED 0x1000 */ -/*#define RESERVED 0x2000 */ -/*#define RESERVED 0x4000 */ -/*#define RESERVED 0x8000 */ - -/* media_opts & media_set Fields bit defs for Ethernet ... */ -#define MED_OPT_BNC 0x01 -#define MED_OPT_UTP 0x02 -#define MED_OPT_AUI 0x04 -#define MED_OPT_10MB 0x08 -#define MED_OPT_100MB 0x10 -#define MED_OPT_S10 0x20 - -/* media_opts & media_set Fields bit defs for Token Ring ... */ -#define MED_OPT_4MB 0x08 -#define MED_OPT_16MB 0x10 -#define MED_OPT_STP 0x40 - -#define MAX_8023_SIZE 1500 /* Max 802.3 size of frame. */ -#define DEFAULT_ERX_VALUE 4 /* Number of 16-byte blocks for 790B early Rx. */ -#define DEFAULT_ETX_VALUE 32 /* Number of bytes for 790B early Tx. */ -#define DEFAULT_TX_RETRIES 3 /* Number of transmit retries */ -#define LPBK_FRAME_SIZE 1024 /* Default loopback frame for Rx calibration test. */ -#define MAX_LOOKAHEAD_SIZE 252 /* Max lookahead size for ethernet. */ - -#define RW_MAC_STATE 0x1101 -#define RW_SA_OF_LAST_AMP_OR_SMP 0x2803 -#define RW_PHYSICAL_DROP_NUMBER 0x3B02 -#define RW_UPSTREAM_NEIGHBOR_ADDRESS 0x3E03 -#define RW_PRODUCT_INSTANCE_ID 0x4B09 - -#define RW_TRC_STATUS_BLOCK 0x5412 - -#define RW_MAC_ERROR_COUNTERS_NO_CLEAR 0x8006 -#define RW_MAC_ERROR_COUNTER_CLEAR 0x7A06 -#define RW_CONFIG_REGISTER_0 0xA001 -#define RW_CONFIG_REGISTER_1 0xA101 -#define RW_PRESCALE_TIMER_THRESHOLD 0xA201 -#define RW_TPT_THRESHOLD 0xA301 -#define RW_TQP_THRESHOLD 0xA401 -#define RW_TNT_THRESHOLD 0xA501 -#define RW_TBT_THRESHOLD 0xA601 -#define RW_TSM_THRESHOLD 0xA701 -#define RW_TAM_THRESHOLD 0xA801 -#define RW_TBR_THRESHOLD 0xA901 -#define RW_TER_THRESHOLD 0xAA01 -#define RW_TGT_THRESHOLD 0xAB01 -#define RW_THT_THRESHOLD 0xAC01 -#define RW_TRR_THRESHOLD 0xAD01 -#define RW_TVX_THRESHOLD 0xAE01 -#define RW_INDIVIDUAL_MAC_ADDRESS 0xB003 - -#define RW_INDIVIDUAL_GROUP_ADDRESS 0xB303 /* all of group addr */ -#define RW_INDIVIDUAL_GROUP_ADDR_WORD_0 0xB301 /* 1st word of group addr */ -#define RW_INDIVIDUAL_GROUP_ADDR 0xB402 /* 2nd-3rd word of group addr */ -#define RW_FUNCTIONAL_ADDRESS 0xB603 /* all of functional addr */ -#define RW_FUNCTIONAL_ADDR_WORD_0 0xB601 /* 1st word of func addr */ -#define RW_FUNCTIONAL_ADDR 0xB702 /* 2nd-3rd word func addr */ - -#define RW_BIT_SIGNIFICANT_GROUP_ADDR 0xB902 -#define RW_SOURCE_RING_BRIDGE_NUMBER 0xBB01 -#define RW_TARGET_RING_NUMBER 0xBC01 - -#define RW_HIC_INTERRUPT_MASK 0xC601 - -#define SOURCE_ROUTING_SPANNING_BITS 0x00C0 /* Spanning Tree Frames */ -#define SOURCE_ROUTING_EXPLORER_BIT 0x0040 /* Explorer and Single Route */ - - /* write */ - -#define CSR_MSK_ALL 0x80 // Bic 587 Only -#define CSR_MSKTINT 0x20 -#define CSR_MSKCBUSY 0x10 -#define CSR_CLRTINT 0x08 -#define CSR_CLRCBUSY 0x04 -#define CSR_WCSS 0x02 -#define CSR_CA 0x01 - - /* read */ - -#define CSR_TINT 0x20 -#define CSR_CINT 0x10 -#define CSR_TSTAT 0x08 -#define CSR_CSTAT 0x04 -#define CSR_FAULT 0x02 -#define CSR_CBUSY 0x01 - -#define LAAR_MEM16ENB 0x80 -#define Zws16 0x20 - -#define IRR_IEN 0x80 -#define Zws8 0x01 - -#define IMCCR_EIL 0x04 - -typedef struct { - __u8 ac; /* Access Control */ - __u8 fc; /* Frame Control */ - __u8 da[6]; /* Dest Addr */ - __u8 sa[6]; /* Source Addr */ - - __u16 vl; /* Vector Length */ - __u8 dc_sc; /* Dest/Source Class */ - __u8 vc; /* Vector Code */ - } MAC_HEADER; - -#define MAX_SUB_VECTOR_INFO (RX_DATA_BUFFER_SIZE - sizeof(MAC_HEADER) - 2) - -typedef struct - { - __u8 svl; /* Sub-vector Length */ - __u8 svi; /* Sub-vector Code */ - __u8 svv[MAX_SUB_VECTOR_INFO]; /* Sub-vector Info */ - } MAC_SUB_VECTOR; - -#endif /* __KERNEL__ */ -#endif /* __LINUX_SMCTR_H */ diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c deleted file mode 100644 index b5e0855e4b39..000000000000 --- a/drivers/net/tokenring/tms380tr.c +++ /dev/null @@ -1,2306 +0,0 @@ -/* - * tms380tr.c: A network driver library for Texas Instruments TMS380-based - * Token Ring Adapters. - * - * Originally sktr.c: Written 1997 by Christoph Goos - * - * A fine result of the Linux Systems Network Architecture Project. - * http://www.vanheusden.com/sna/ - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * The following modules are currently available for card support: - * - tmspci (Generic PCI card support) - * - abyss (Madge PCI support) - * - tmsisa (SysKonnect TR4/16 ISA) - * - * Sources: - * - The hardware related parts of this driver are take from - * the SysKonnect Token Ring driver for Windows NT. - * - I used the IBM Token Ring driver 'ibmtr.c' as a base for this - * driver, as well as the 'skeleton.c' driver by Donald Becker. - * - Also various other drivers in the linux source tree were taken - * as samples for some tasks. - * - TI TMS380 Second-Generation Token Ring User's Guide - * - TI datasheets for respective chips - * - David Hein at Texas Instruments - * - Various Madge employees - * - * Maintainer(s): - * JS Jay Schulist jschlst@samba.org - * CG Christoph Goos cgoos@syskonnect.de - * AF Adam Fritzler - * MLP Mike Phillips phillim@amtrak.com - * JF Jochen Friedrich jochen@scram.de - * - * Modification History: - * 29-Aug-97 CG Created - * 04-Apr-98 CG Fixed problems caused by tok_timer_check - * 10-Apr-98 CG Fixed lockups at cable disconnection - * 27-May-98 JS Formated to Linux Kernel Format - * 31-May-98 JS Hacked in PCI support - * 16-Jun-98 JS Modulized for multiple cards with one driver - * Sep-99 AF Renamed to tms380tr (supports more than SK's) - * 23-Sep-99 AF Added Compaq and Thomas-Conrad PCI support - * Fixed a bug causing double copies on PCI - * Fixed for new multicast stuff (2.2/2.3) - * 25-Sep-99 AF Uped TPL_NUM from 3 to 9 - * Removed extraneous 'No free TPL' - * 22-Dec-99 AF Added Madge PCI Mk2 support and generalized - * parts of the initilization procedure. - * 30-Dec-99 AF Turned tms380tr into a library ala 8390. - * Madge support is provided in the abyss module - * Generic PCI support is in the tmspci module. - * 30-Nov-00 JF Updated PCI code to support IO MMU via - * pci_map_static(). Alpha uses this MMU for ISA - * as well. - * 14-Jan-01 JF Fix DMA on ifdown/ifup sequences. Some - * cleanup. - * 13-Jan-02 JF Add spinlock to fix race condition. - * 09-Nov-02 JF Fixed printks to not SPAM the console during - * normal operation. - * 30-Dec-02 JF Removed incorrect __init from - * tms380tr_init_card. - * 22-Jul-05 JF Converted to dma-mapping. - * - * To do: - * 1. Multi/Broadcast packet handling (this may have fixed itself) - * 2. Write a sktrisa module that includes the old ISA support (done) - * 3. Allow modules to load their own microcode - * 4. Speed up the BUD process -- freezing the kernel for 3+sec is - * quite unacceptable. - * 5. Still a few remaining stalls when the cable is unplugged. - */ - -#ifdef MODULE -static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, Adam Fritzler\n"; -#endif - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/time.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/dma-mapping.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/trdevice.h> -#include <linux/firmware.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/dma.h> -#include <asm/irq.h> -#include <asm/uaccess.h> - -#include "tms380tr.h" /* Our Stuff */ - -/* Use 0 for production, 1 for verification, 2 for debug, and - * 3 for very verbose debug. - */ -#ifndef TMS380TR_DEBUG -#define TMS380TR_DEBUG 0 -#endif -static unsigned int tms380tr_debug = TMS380TR_DEBUG; - -/* Index to functions, as function prototypes. - * Alphabetical by function name. - */ - -/* "A" */ -/* "B" */ -static int tms380tr_bringup_diags(struct net_device *dev); -/* "C" */ -static void tms380tr_cancel_tx_queue(struct net_local* tp); -static int tms380tr_chipset_init(struct net_device *dev); -static void tms380tr_chk_irq(struct net_device *dev); -static void tms380tr_chk_outstanding_cmds(struct net_device *dev); -static void tms380tr_chk_src_addr(unsigned char *frame, unsigned char *hw_addr); -static unsigned char tms380tr_chk_ssb(struct net_local *tp, unsigned short IrqType); -int tms380tr_close(struct net_device *dev); -static void tms380tr_cmd_status_irq(struct net_device *dev); -/* "D" */ -static void tms380tr_disable_interrupts(struct net_device *dev); -#if TMS380TR_DEBUG > 0 -static void tms380tr_dump(unsigned char *Data, int length); -#endif -/* "E" */ -static void tms380tr_enable_interrupts(struct net_device *dev); -static void tms380tr_exec_cmd(struct net_device *dev, unsigned short Command); -static void tms380tr_exec_sifcmd(struct net_device *dev, unsigned int WriteValue); -/* "F" */ -/* "G" */ -static struct net_device_stats *tms380tr_get_stats(struct net_device *dev); -/* "H" */ -static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb, - struct net_device *dev); -/* "I" */ -static int tms380tr_init_adapter(struct net_device *dev); -static void tms380tr_init_ipb(struct net_local *tp); -static void tms380tr_init_net_local(struct net_device *dev); -static void tms380tr_init_opb(struct net_device *dev); -/* "M" */ -/* "O" */ -int tms380tr_open(struct net_device *dev); -static void tms380tr_open_adapter(struct net_device *dev); -/* "P" */ -/* "R" */ -static void tms380tr_rcv_status_irq(struct net_device *dev); -static int tms380tr_read_ptr(struct net_device *dev); -static void tms380tr_read_ram(struct net_device *dev, unsigned char *Data, - unsigned short Address, int Length); -static int tms380tr_reset_adapter(struct net_device *dev); -static void tms380tr_reset_interrupt(struct net_device *dev); -static void tms380tr_ring_status_irq(struct net_device *dev); -/* "S" */ -static netdev_tx_t tms380tr_send_packet(struct sk_buff *skb, - struct net_device *dev); -static void tms380tr_set_multicast_list(struct net_device *dev); -static int tms380tr_set_mac_address(struct net_device *dev, void *addr); -/* "T" */ -static void tms380tr_timer_chk(unsigned long data); -static void tms380tr_timer_end_wait(unsigned long data); -static void tms380tr_tx_status_irq(struct net_device *dev); -/* "U" */ -static void tms380tr_update_rcv_stats(struct net_local *tp, - unsigned char DataPtr[], unsigned int Length); -/* "W" */ -void tms380tr_wait(unsigned long time); -static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status); -static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status); - -#define SIFREADB(reg) \ - (((struct net_local *)netdev_priv(dev))->sifreadb(dev, reg)) -#define SIFWRITEB(val, reg) \ - (((struct net_local *)netdev_priv(dev))->sifwriteb(dev, val, reg)) -#define SIFREADW(reg) \ - (((struct net_local *)netdev_priv(dev))->sifreadw(dev, reg)) -#define SIFWRITEW(val, reg) \ - (((struct net_local *)netdev_priv(dev))->sifwritew(dev, val, reg)) - - - -#if 0 /* TMS380TR_DEBUG > 0 */ -static int madgemc_sifprobe(struct net_device *dev) -{ - unsigned char old, chk1, chk2; - - old = SIFREADB(SIFADR); /* Get the old SIFADR value */ - - chk1 = 0; /* Begin with check value 0 */ - do { - madgemc_setregpage(dev, 0); - /* Write new SIFADR value */ - SIFWRITEB(chk1, SIFADR); - chk2 = SIFREADB(SIFADR); - if (chk2 != chk1) - return -1; - - madgemc_setregpage(dev, 1); - /* Read, invert and write */ - chk2 = SIFREADB(SIFADD); - if (chk2 != chk1) - return -1; - - madgemc_setregpage(dev, 0); - chk2 ^= 0x0FE; - SIFWRITEB(chk2, SIFADR); - - /* Read, invert and compare */ - madgemc_setregpage(dev, 1); - chk2 = SIFREADB(SIFADD); - madgemc_setregpage(dev, 0); - chk2 ^= 0x0FE; - - if(chk1 != chk2) - return -1; /* No adapter */ - chk1 -= 2; - } while(chk1 != 0); /* Repeat 128 times (all byte values) */ - - madgemc_setregpage(dev, 0); /* sanity */ - /* Restore the SIFADR value */ - SIFWRITEB(old, SIFADR); - - return 0; -} -#endif - -/* - * Open/initialize the board. This is called sometime after - * booting when the 'ifconfig' program is run. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is non-reboot way to recover if something goes wrong. - */ -int tms380tr_open(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - /* init the spinlock */ - spin_lock_init(&tp->lock); - init_timer(&tp->timer); - - /* Reset the hardware here. Don't forget to set the station address. */ - -#if defined(CONFIG_ISA) && defined(CONFIG_ISA_DMA_API) - if(dev->dma > 0) - { - unsigned long flags=claim_dma_lock(); - disable_dma(dev->dma); - set_dma_mode(dev->dma, DMA_MODE_CASCADE); - enable_dma(dev->dma); - release_dma_lock(flags); - } -#endif - - err = tms380tr_chipset_init(dev); - if(err) - { - printk(KERN_INFO "%s: Chipset initialization error\n", - dev->name); - return -1; - } - - tp->timer.expires = jiffies + 30*HZ; - tp->timer.function = tms380tr_timer_end_wait; - tp->timer.data = (unsigned long)dev; - add_timer(&tp->timer); - - printk(KERN_DEBUG "%s: Adapter RAM size: %dK\n", - dev->name, tms380tr_read_ptr(dev)); - - tms380tr_enable_interrupts(dev); - tms380tr_open_adapter(dev); - - netif_start_queue(dev); - - /* Wait for interrupt from hardware. If interrupt does not come, - * there will be a timeout from the timer. - */ - tp->Sleeping = 1; - interruptible_sleep_on(&tp->wait_for_tok_int); - del_timer(&tp->timer); - - /* If AdapterVirtOpenFlag is 1, the adapter is now open for use */ - if(tp->AdapterVirtOpenFlag == 0) - { - tms380tr_disable_interrupts(dev); - return -1; - } - - tp->StartTime = jiffies; - - /* Start function control timer */ - tp->timer.expires = jiffies + 2*HZ; - tp->timer.function = tms380tr_timer_chk; - tp->timer.data = (unsigned long)dev; - add_timer(&tp->timer); - - return 0; -} - -/* - * Timeout function while waiting for event - */ -static void tms380tr_timer_end_wait(unsigned long data) -{ - struct net_device *dev = (struct net_device*)data; - struct net_local *tp = netdev_priv(dev); - - if(tp->Sleeping) - { - tp->Sleeping = 0; - wake_up_interruptible(&tp->wait_for_tok_int); - } -} - -/* - * Initialize the chipset - */ -static int tms380tr_chipset_init(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int err; - - tms380tr_init_ipb(tp); - tms380tr_init_opb(dev); - tms380tr_init_net_local(dev); - - if(tms380tr_debug > 3) - printk(KERN_DEBUG "%s: Resetting adapter...\n", dev->name); - err = tms380tr_reset_adapter(dev); - if(err < 0) - return -1; - - if(tms380tr_debug > 3) - printk(KERN_DEBUG "%s: Bringup diags...\n", dev->name); - err = tms380tr_bringup_diags(dev); - if(err < 0) - return -1; - - if(tms380tr_debug > 3) - printk(KERN_DEBUG "%s: Init adapter...\n", dev->name); - err = tms380tr_init_adapter(dev); - if(err < 0) - return -1; - - if(tms380tr_debug > 3) - printk(KERN_DEBUG "%s: Done!\n", dev->name); - return 0; -} - -/* - * Initializes the net_local structure. - */ -static void tms380tr_init_net_local(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - int i; - dma_addr_t dmabuf; - - tp->scb.CMD = 0; - tp->scb.Parm[0] = 0; - tp->scb.Parm[1] = 0; - - tp->ssb.STS = 0; - tp->ssb.Parm[0] = 0; - tp->ssb.Parm[1] = 0; - tp->ssb.Parm[2] = 0; - - tp->CMDqueue = 0; - - tp->AdapterOpenFlag = 0; - tp->AdapterVirtOpenFlag = 0; - tp->ScbInUse = 0; - tp->OpenCommandIssued = 0; - tp->ReOpenInProgress = 0; - tp->HaltInProgress = 0; - tp->TransmitHaltScheduled = 0; - tp->LobeWireFaultLogged = 0; - tp->LastOpenStatus = 0; - tp->MaxPacketSize = DEFAULT_PACKET_SIZE; - - /* Create circular chain of transmit lists */ - for (i = 0; i < TPL_NUM; i++) - { - tp->Tpl[i].NextTPLAddr = htonl(((char *)(&tp->Tpl[(i+1) % TPL_NUM]) - (char *)tp) + tp->dmabuffer); /* DMA buffer may be MMU driven */ - tp->Tpl[i].Status = 0; - tp->Tpl[i].FrameSize = 0; - tp->Tpl[i].FragList[0].DataCount = 0; - tp->Tpl[i].FragList[0].DataAddr = 0; - tp->Tpl[i].NextTPLPtr = &tp->Tpl[(i+1) % TPL_NUM]; - tp->Tpl[i].MData = NULL; - tp->Tpl[i].TPLIndex = i; - tp->Tpl[i].DMABuff = 0; - tp->Tpl[i].BusyFlag = 0; - } - - tp->TplFree = tp->TplBusy = &tp->Tpl[0]; - - /* Create circular chain of receive lists */ - for (i = 0; i < RPL_NUM; i++) - { - tp->Rpl[i].NextRPLAddr = htonl(((char *)(&tp->Rpl[(i+1) % RPL_NUM]) - (char *)tp) + tp->dmabuffer); /* DMA buffer may be MMU driven */ - tp->Rpl[i].Status = (RX_VALID | RX_START_FRAME | RX_END_FRAME | RX_FRAME_IRQ); - tp->Rpl[i].FrameSize = 0; - tp->Rpl[i].FragList[0].DataCount = cpu_to_be16((unsigned short)tp->MaxPacketSize); - - /* Alloc skb and point adapter to data area */ - tp->Rpl[i].Skb = dev_alloc_skb(tp->MaxPacketSize); - tp->Rpl[i].DMABuff = 0; - - /* skb == NULL ? then use local buffer */ - if(tp->Rpl[i].Skb == NULL) - { - tp->Rpl[i].SkbStat = SKB_UNAVAILABLE; - tp->Rpl[i].FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[i] - (char *)tp) + tp->dmabuffer); - tp->Rpl[i].MData = tp->LocalRxBuffers[i]; - } - else /* SKB != NULL */ - { - tp->Rpl[i].Skb->dev = dev; - skb_put(tp->Rpl[i].Skb, tp->MaxPacketSize); - - /* data unreachable for DMA ? then use local buffer */ - dmabuf = dma_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE); - if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit)) - { - tp->Rpl[i].SkbStat = SKB_DATA_COPY; - tp->Rpl[i].FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[i] - (char *)tp) + tp->dmabuffer); - tp->Rpl[i].MData = tp->LocalRxBuffers[i]; - } - else /* DMA directly in skb->data */ - { - tp->Rpl[i].SkbStat = SKB_DMA_DIRECT; - tp->Rpl[i].FragList[0].DataAddr = htonl(dmabuf); - tp->Rpl[i].MData = tp->Rpl[i].Skb->data; - tp->Rpl[i].DMABuff = dmabuf; - } - } - - tp->Rpl[i].NextRPLPtr = &tp->Rpl[(i+1) % RPL_NUM]; - tp->Rpl[i].RPLIndex = i; - } - - tp->RplHead = &tp->Rpl[0]; - tp->RplTail = &tp->Rpl[RPL_NUM-1]; - tp->RplTail->Status = (RX_START_FRAME | RX_END_FRAME | RX_FRAME_IRQ); -} - -/* - * Initializes the initialisation parameter block. - */ -static void tms380tr_init_ipb(struct net_local *tp) -{ - tp->ipb.Init_Options = BURST_MODE; - tp->ipb.CMD_Status_IV = 0; - tp->ipb.TX_IV = 0; - tp->ipb.RX_IV = 0; - tp->ipb.Ring_Status_IV = 0; - tp->ipb.SCB_Clear_IV = 0; - tp->ipb.Adapter_CHK_IV = 0; - tp->ipb.RX_Burst_Size = BURST_SIZE; - tp->ipb.TX_Burst_Size = BURST_SIZE; - tp->ipb.DMA_Abort_Thrhld = DMA_RETRIES; - tp->ipb.SCB_Addr = 0; - tp->ipb.SSB_Addr = 0; -} - -/* - * Initializes the open parameter block. - */ -static void tms380tr_init_opb(struct net_device *dev) -{ - struct net_local *tp; - unsigned long Addr; - unsigned short RplSize = RPL_SIZE; - unsigned short TplSize = TPL_SIZE; - unsigned short BufferSize = BUFFER_SIZE; - int i; - - tp = netdev_priv(dev); - - tp->ocpl.OPENOptions = 0; - tp->ocpl.OPENOptions |= ENABLE_FULL_DUPLEX_SELECTION; - tp->ocpl.FullDuplex = 0; - tp->ocpl.FullDuplex |= OPEN_FULL_DUPLEX_OFF; - - /* - * Set node address - * - * We go ahead and put it in the OPB even though on - * most of the generic adapters this isn't required. - * Its simpler this way. -- ASF - */ - for (i=0;i<6;i++) - tp->ocpl.NodeAddr[i] = ((unsigned char *)dev->dev_addr)[i]; - - tp->ocpl.GroupAddr = 0; - tp->ocpl.FunctAddr = 0; - tp->ocpl.RxListSize = cpu_to_be16((unsigned short)RplSize); - tp->ocpl.TxListSize = cpu_to_be16((unsigned short)TplSize); - tp->ocpl.BufSize = cpu_to_be16((unsigned short)BufferSize); - tp->ocpl.Reserved = 0; - tp->ocpl.TXBufMin = TX_BUF_MIN; - tp->ocpl.TXBufMax = TX_BUF_MAX; - - Addr = htonl(((char *)tp->ProductID - (char *)tp) + tp->dmabuffer); - - tp->ocpl.ProdIDAddr[0] = LOWORD(Addr); - tp->ocpl.ProdIDAddr[1] = HIWORD(Addr); -} - -/* - * Send OPEN command to adapter - */ -static void tms380tr_open_adapter(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - if(tp->OpenCommandIssued) - return; - - tp->OpenCommandIssued = 1; - tms380tr_exec_cmd(dev, OC_OPEN); -} - -/* - * Clear the adapter's interrupt flag. Clear system interrupt enable - * (SINTEN): disable adapter to system interrupts. - */ -static void tms380tr_disable_interrupts(struct net_device *dev) -{ - SIFWRITEB(0, SIFACL); -} - -/* - * Set the adapter's interrupt flag. Set system interrupt enable - * (SINTEN): enable adapter to system interrupts. - */ -static void tms380tr_enable_interrupts(struct net_device *dev) -{ - SIFWRITEB(ACL_SINTEN, SIFACL); -} - -/* - * Put command in command queue, try to execute it. - */ -static void tms380tr_exec_cmd(struct net_device *dev, unsigned short Command) -{ - struct net_local *tp = netdev_priv(dev); - - tp->CMDqueue |= Command; - tms380tr_chk_outstanding_cmds(dev); -} - -static void tms380tr_timeout(struct net_device *dev) -{ - /* - * If we get here, some higher level has decided we are broken. - * There should really be a "kick me" function call instead. - * - * Resetting the token ring adapter takes a long time so just - * fake transmission time and go on trying. Our own timeout - * routine is in tms380tr_timer_chk() - */ - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -/* - * Gets skb from system, queues it and checks if it can be sent - */ -static netdev_tx_t tms380tr_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - netdev_tx_t rc; - - rc = tms380tr_hardware_send_packet(skb, dev); - if(tp->TplFree->NextTPLPtr->BusyFlag) - netif_stop_queue(dev); - return rc; -} - -/* - * Move frames into adapter tx queue - */ -static netdev_tx_t tms380tr_hardware_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - TPL *tpl; - short length; - unsigned char *buf; - unsigned long flags; - int i; - dma_addr_t dmabuf, newbuf; - struct net_local *tp = netdev_priv(dev); - - /* Try to get a free TPL from the chain. - * - * NOTE: We *must* always leave one unused TPL in the chain, - * because otherwise the adapter might send frames twice. - */ - spin_lock_irqsave(&tp->lock, flags); - if(tp->TplFree->NextTPLPtr->BusyFlag) { /* No free TPL */ - if (tms380tr_debug > 0) - printk(KERN_DEBUG "%s: No free TPL\n", dev->name); - spin_unlock_irqrestore(&tp->lock, flags); - return NETDEV_TX_BUSY; - } - - dmabuf = 0; - - /* Is buffer reachable for Busmaster-DMA? */ - - length = skb->len; - dmabuf = dma_map_single(tp->pdev, skb->data, length, DMA_TO_DEVICE); - if(tp->dmalimit && (dmabuf + length > tp->dmalimit)) { - /* Copy frame to local buffer */ - dma_unmap_single(tp->pdev, dmabuf, length, DMA_TO_DEVICE); - dmabuf = 0; - i = tp->TplFree->TPLIndex; - buf = tp->LocalTxBuffers[i]; - skb_copy_from_linear_data(skb, buf, length); - newbuf = ((char *)buf - (char *)tp) + tp->dmabuffer; - } - else { - /* Send direct from skb->data */ - newbuf = dmabuf; - buf = skb->data; - } - /* Source address in packet? */ - tms380tr_chk_src_addr(buf, dev->dev_addr); - tp->LastSendTime = jiffies; - tpl = tp->TplFree; /* Get the "free" TPL */ - tpl->BusyFlag = 1; /* Mark TPL as busy */ - tp->TplFree = tpl->NextTPLPtr; - - /* Save the skb for delayed return of skb to system */ - tpl->Skb = skb; - tpl->DMABuff = dmabuf; - tpl->FragList[0].DataCount = cpu_to_be16((unsigned short)length); - tpl->FragList[0].DataAddr = htonl(newbuf); - - /* Write the data length in the transmit list. */ - tpl->FrameSize = cpu_to_be16((unsigned short)length); - tpl->MData = buf; - - /* Transmit the frame and set the status values. */ - tms380tr_write_tpl_status(tpl, TX_VALID | TX_START_FRAME - | TX_END_FRAME | TX_PASS_SRC_ADDR - | TX_FRAME_IRQ); - - /* Let adapter send the frame. */ - tms380tr_exec_sifcmd(dev, CMD_TX_VALID); - spin_unlock_irqrestore(&tp->lock, flags); - - return NETDEV_TX_OK; -} - -/* - * Write the given value to the 'Status' field of the specified TPL. - * NOTE: This function should be used whenever the status of any TPL must be - * modified by the driver, because the compiler may otherwise change the - * order of instructions such that writing the TPL status may be executed at - * an undesirable time. When this function is used, the status is always - * written when the function is called. - */ -static void tms380tr_write_tpl_status(TPL *tpl, unsigned int Status) -{ - tpl->Status = Status; -} - -static void tms380tr_chk_src_addr(unsigned char *frame, unsigned char *hw_addr) -{ - unsigned char SRBit; - - if((((unsigned long)frame[8]) & ~0x80) != 0) /* Compare 4 bytes */ - return; - if((unsigned short)frame[12] != 0) /* Compare 2 bytes */ - return; - - SRBit = frame[8] & 0x80; - memcpy(&frame[8], hw_addr, 6); - frame[8] |= SRBit; -} - -/* - * The timer routine: Check if adapter still open and working, reopen if not. - */ -static void tms380tr_timer_chk(unsigned long data) -{ - struct net_device *dev = (struct net_device*)data; - struct net_local *tp = netdev_priv(dev); - - if(tp->HaltInProgress) - return; - - tms380tr_chk_outstanding_cmds(dev); - if(time_before(tp->LastSendTime + SEND_TIMEOUT, jiffies) && - (tp->TplFree != tp->TplBusy)) - { - /* Anything to send, but stalled too long */ - tp->LastSendTime = jiffies; - tms380tr_exec_cmd(dev, OC_CLOSE); /* Does reopen automatically */ - } - - tp->timer.expires = jiffies + 2*HZ; - add_timer(&tp->timer); - - if(tp->AdapterOpenFlag || tp->ReOpenInProgress) - return; - tp->ReOpenInProgress = 1; - tms380tr_open_adapter(dev); -} - -/* - * The typical workload of the driver: Handle the network interface interrupts. - */ -irqreturn_t tms380tr_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *tp; - unsigned short irq_type; - int handled = 0; - - tp = netdev_priv(dev); - - irq_type = SIFREADW(SIFSTS); - - while(irq_type & STS_SYSTEM_IRQ) { - handled = 1; - irq_type &= STS_IRQ_MASK; - - if(!tms380tr_chk_ssb(tp, irq_type)) { - printk(KERN_DEBUG "%s: DATA LATE occurred\n", dev->name); - break; - } - - switch(irq_type) { - case STS_IRQ_RECEIVE_STATUS: - tms380tr_reset_interrupt(dev); - tms380tr_rcv_status_irq(dev); - break; - - case STS_IRQ_TRANSMIT_STATUS: - /* Check if TRANSMIT.HALT command is complete */ - if(tp->ssb.Parm[0] & COMMAND_COMPLETE) { - tp->TransmitCommandActive = 0; - tp->TransmitHaltScheduled = 0; - - /* Issue a new transmit command. */ - tms380tr_exec_cmd(dev, OC_TRANSMIT); - } - - tms380tr_reset_interrupt(dev); - tms380tr_tx_status_irq(dev); - break; - - case STS_IRQ_COMMAND_STATUS: - /* The SSB contains status of last command - * other than receive/transmit. - */ - tms380tr_cmd_status_irq(dev); - break; - - case STS_IRQ_SCB_CLEAR: - /* The SCB is free for another command. */ - tp->ScbInUse = 0; - tms380tr_chk_outstanding_cmds(dev); - break; - - case STS_IRQ_RING_STATUS: - tms380tr_ring_status_irq(dev); - break; - - case STS_IRQ_ADAPTER_CHECK: - tms380tr_chk_irq(dev); - break; - - case STS_IRQ_LLC_STATUS: - printk(KERN_DEBUG "tms380tr: unexpected LLC status IRQ\n"); - break; - - case STS_IRQ_TIMER: - printk(KERN_DEBUG "tms380tr: unexpected Timer IRQ\n"); - break; - - case STS_IRQ_RECEIVE_PENDING: - printk(KERN_DEBUG "tms380tr: unexpected Receive Pending IRQ\n"); - break; - - default: - printk(KERN_DEBUG "Unknown Token Ring IRQ (0x%04x)\n", irq_type); - break; - } - - /* Reset system interrupt if not already done. */ - if(irq_type != STS_IRQ_TRANSMIT_STATUS && - irq_type != STS_IRQ_RECEIVE_STATUS) { - tms380tr_reset_interrupt(dev); - } - - irq_type = SIFREADW(SIFSTS); - } - - return IRQ_RETVAL(handled); -} - -/* - * Reset the INTERRUPT SYSTEM bit and issue SSB CLEAR command. - */ -static void tms380tr_reset_interrupt(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - SSB *ssb = &tp->ssb; - - /* - * [Workaround for "Data Late"] - * Set all fields of the SSB to well-defined values so we can - * check if the adapter has written the SSB. - */ - - ssb->STS = (unsigned short) -1; - ssb->Parm[0] = (unsigned short) -1; - ssb->Parm[1] = (unsigned short) -1; - ssb->Parm[2] = (unsigned short) -1; - - /* Free SSB by issuing SSB_CLEAR command after reading IRQ code - * and clear STS_SYSTEM_IRQ bit: enable adapter for further interrupts. - */ - tms380tr_exec_sifcmd(dev, CMD_SSB_CLEAR | CMD_CLEAR_SYSTEM_IRQ); -} - -/* - * Check if the SSB has actually been written by the adapter. - */ -static unsigned char tms380tr_chk_ssb(struct net_local *tp, unsigned short IrqType) -{ - SSB *ssb = &tp->ssb; /* The address of the SSB. */ - - /* C 0 1 2 INTERRUPT CODE - * - - - - -------------- - * 1 1 1 1 TRANSMIT STATUS - * 1 1 1 1 RECEIVE STATUS - * 1 ? ? 0 COMMAND STATUS - * 0 0 0 0 SCB CLEAR - * 1 1 0 0 RING STATUS - * 0 0 0 0 ADAPTER CHECK - * - * 0 = SSB field not affected by interrupt - * 1 = SSB field is affected by interrupt - * - * C = SSB ADDRESS +0: COMMAND - * 0 = SSB ADDRESS +2: STATUS 0 - * 1 = SSB ADDRESS +4: STATUS 1 - * 2 = SSB ADDRESS +6: STATUS 2 - */ - - /* Check if this interrupt does use the SSB. */ - - if(IrqType != STS_IRQ_TRANSMIT_STATUS && - IrqType != STS_IRQ_RECEIVE_STATUS && - IrqType != STS_IRQ_COMMAND_STATUS && - IrqType != STS_IRQ_RING_STATUS) - { - return 1; /* SSB not involved. */ - } - - /* Note: All fields of the SSB have been set to all ones (-1) after it - * has last been used by the software (see DriverIsr()). - * - * Check if the affected SSB fields are still unchanged. - */ - - if(ssb->STS == (unsigned short) -1) - return 0; /* Command field not yet available. */ - if(IrqType == STS_IRQ_COMMAND_STATUS) - return 1; /* Status fields not always affected. */ - if(ssb->Parm[0] == (unsigned short) -1) - return 0; /* Status 1 field not yet available. */ - if(IrqType == STS_IRQ_RING_STATUS) - return 1; /* Status 2 & 3 fields not affected. */ - - /* Note: At this point, the interrupt is either TRANSMIT or RECEIVE. */ - if(ssb->Parm[1] == (unsigned short) -1) - return 0; /* Status 2 field not yet available. */ - if(ssb->Parm[2] == (unsigned short) -1) - return 0; /* Status 3 field not yet available. */ - - return 1; /* All SSB fields have been written by the adapter. */ -} - -/* - * Evaluates the command results status in the SSB status field. - */ -static void tms380tr_cmd_status_irq(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned short ssb_cmd, ssb_parm_0; - unsigned short ssb_parm_1; - char *open_err = "Open error -"; - char *code_err = "Open code -"; - - /* Copy the ssb values to local variables */ - ssb_cmd = tp->ssb.STS; - ssb_parm_0 = tp->ssb.Parm[0]; - ssb_parm_1 = tp->ssb.Parm[1]; - - if(ssb_cmd == OPEN) - { - tp->Sleeping = 0; - if(!tp->ReOpenInProgress) - wake_up_interruptible(&tp->wait_for_tok_int); - - tp->OpenCommandIssued = 0; - tp->ScbInUse = 0; - - if((ssb_parm_0 & 0x00FF) == GOOD_COMPLETION) - { - /* Success, the adapter is open. */ - tp->LobeWireFaultLogged = 0; - tp->AdapterOpenFlag = 1; - tp->AdapterVirtOpenFlag = 1; - tp->TransmitCommandActive = 0; - tms380tr_exec_cmd(dev, OC_TRANSMIT); - tms380tr_exec_cmd(dev, OC_RECEIVE); - - if(tp->ReOpenInProgress) - tp->ReOpenInProgress = 0; - - return; - } - else /* The adapter did not open. */ - { - if(ssb_parm_0 & NODE_ADDR_ERROR) - printk(KERN_INFO "%s: Node address error\n", - dev->name); - if(ssb_parm_0 & LIST_SIZE_ERROR) - printk(KERN_INFO "%s: List size error\n", - dev->name); - if(ssb_parm_0 & BUF_SIZE_ERROR) - printk(KERN_INFO "%s: Buffer size error\n", - dev->name); - if(ssb_parm_0 & TX_BUF_COUNT_ERROR) - printk(KERN_INFO "%s: Tx buffer count error\n", - dev->name); - if(ssb_parm_0 & INVALID_OPEN_OPTION) - printk(KERN_INFO "%s: Invalid open option\n", - dev->name); - if(ssb_parm_0 & OPEN_ERROR) - { - /* Show the open phase. */ - switch(ssb_parm_0 & OPEN_PHASES_MASK) - { - case LOBE_MEDIA_TEST: - if(!tp->LobeWireFaultLogged) - { - tp->LobeWireFaultLogged = 1; - printk(KERN_INFO "%s: %s Lobe wire fault (check cable !).\n", dev->name, open_err); - } - tp->ReOpenInProgress = 1; - tp->AdapterOpenFlag = 0; - tp->AdapterVirtOpenFlag = 1; - tms380tr_open_adapter(dev); - return; - - case PHYSICAL_INSERTION: - printk(KERN_INFO "%s: %s Physical insertion.\n", dev->name, open_err); - break; - - case ADDRESS_VERIFICATION: - printk(KERN_INFO "%s: %s Address verification.\n", dev->name, open_err); - break; - - case PARTICIPATION_IN_RING_POLL: - printk(KERN_INFO "%s: %s Participation in ring poll.\n", dev->name, open_err); - break; - - case REQUEST_INITIALISATION: - printk(KERN_INFO "%s: %s Request initialisation.\n", dev->name, open_err); - break; - - case FULLDUPLEX_CHECK: - printk(KERN_INFO "%s: %s Full duplex check.\n", dev->name, open_err); - break; - - default: - printk(KERN_INFO "%s: %s Unknown open phase\n", dev->name, open_err); - break; - } - - /* Show the open errors. */ - switch(ssb_parm_0 & OPEN_ERROR_CODES_MASK) - { - case OPEN_FUNCTION_FAILURE: - printk(KERN_INFO "%s: %s OPEN_FUNCTION_FAILURE", dev->name, code_err); - tp->LastOpenStatus = - OPEN_FUNCTION_FAILURE; - break; - - case OPEN_SIGNAL_LOSS: - printk(KERN_INFO "%s: %s OPEN_SIGNAL_LOSS\n", dev->name, code_err); - tp->LastOpenStatus = - OPEN_SIGNAL_LOSS; - break; - - case OPEN_TIMEOUT: - printk(KERN_INFO "%s: %s OPEN_TIMEOUT\n", dev->name, code_err); - tp->LastOpenStatus = - OPEN_TIMEOUT; - break; - - case OPEN_RING_FAILURE: - printk(KERN_INFO "%s: %s OPEN_RING_FAILURE\n", dev->name, code_err); - tp->LastOpenStatus = - OPEN_RING_FAILURE; - break; - - case OPEN_RING_BEACONING: - printk(KERN_INFO "%s: %s OPEN_RING_BEACONING\n", dev->name, code_err); - tp->LastOpenStatus = - OPEN_RING_BEACONING; - break; - - case OPEN_DUPLICATE_NODEADDR: - printk(KERN_INFO "%s: %s OPEN_DUPLICATE_NODEADDR\n", dev->name, code_err); - tp->LastOpenStatus = - OPEN_DUPLICATE_NODEADDR; - break; - - case OPEN_REQUEST_INIT: - printk(KERN_INFO "%s: %s OPEN_REQUEST_INIT\n", dev->name, code_err); - tp->LastOpenStatus = - OPEN_REQUEST_INIT; - break; - - case OPEN_REMOVE_RECEIVED: - printk(KERN_INFO "%s: %s OPEN_REMOVE_RECEIVED", dev->name, code_err); - tp->LastOpenStatus = - OPEN_REMOVE_RECEIVED; - break; - - case OPEN_FULLDUPLEX_SET: - printk(KERN_INFO "%s: %s OPEN_FULLDUPLEX_SET\n", dev->name, code_err); - tp->LastOpenStatus = - OPEN_FULLDUPLEX_SET; - break; - - default: - printk(KERN_INFO "%s: %s Unknown open err code", dev->name, code_err); - tp->LastOpenStatus = - OPEN_FUNCTION_FAILURE; - break; - } - } - - tp->AdapterOpenFlag = 0; - tp->AdapterVirtOpenFlag = 0; - - return; - } - } - else - { - if(ssb_cmd != READ_ERROR_LOG) - return; - - /* Add values from the error log table to the MAC - * statistics counters and update the errorlogtable - * memory. - */ - tp->MacStat.line_errors += tp->errorlogtable.Line_Error; - tp->MacStat.burst_errors += tp->errorlogtable.Burst_Error; - tp->MacStat.A_C_errors += tp->errorlogtable.ARI_FCI_Error; - tp->MacStat.lost_frames += tp->errorlogtable.Lost_Frame_Error; - tp->MacStat.recv_congest_count += tp->errorlogtable.Rx_Congest_Error; - tp->MacStat.rx_errors += tp->errorlogtable.Rx_Congest_Error; - tp->MacStat.frame_copied_errors += tp->errorlogtable.Frame_Copied_Error; - tp->MacStat.token_errors += tp->errorlogtable.Token_Error; - tp->MacStat.dummy1 += tp->errorlogtable.DMA_Bus_Error; - tp->MacStat.dummy1 += tp->errorlogtable.DMA_Parity_Error; - tp->MacStat.abort_delimiters += tp->errorlogtable.AbortDelimeters; - tp->MacStat.frequency_errors += tp->errorlogtable.Frequency_Error; - tp->MacStat.internal_errors += tp->errorlogtable.Internal_Error; - } -} - -/* - * The inverse routine to tms380tr_open(). - */ -int tms380tr_close(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - netif_stop_queue(dev); - - del_timer(&tp->timer); - - /* Flush the Tx and disable Rx here. */ - - tp->HaltInProgress = 1; - tms380tr_exec_cmd(dev, OC_CLOSE); - tp->timer.expires = jiffies + 1*HZ; - tp->timer.function = tms380tr_timer_end_wait; - tp->timer.data = (unsigned long)dev; - add_timer(&tp->timer); - - tms380tr_enable_interrupts(dev); - - tp->Sleeping = 1; - interruptible_sleep_on(&tp->wait_for_tok_int); - tp->TransmitCommandActive = 0; - - del_timer(&tp->timer); - tms380tr_disable_interrupts(dev); - -#if defined(CONFIG_ISA) && defined(CONFIG_ISA_DMA_API) - if(dev->dma > 0) - { - unsigned long flags=claim_dma_lock(); - disable_dma(dev->dma); - release_dma_lock(flags); - } -#endif - - SIFWRITEW(0xFF00, SIFCMD); -#if 0 - if(dev->dma > 0) /* what the? */ - SIFWRITEB(0xff, POSREG); -#endif - tms380tr_cancel_tx_queue(tp); - - return 0; -} - -/* - * Get the current statistics. This may be called with the card open - * or closed. - */ -static struct net_device_stats *tms380tr_get_stats(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - return (struct net_device_stats *)&tp->MacStat; -} - -/* - * Set or clear the multicast filter for this adapter. - */ -static void tms380tr_set_multicast_list(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned int OpenOptions; - - OpenOptions = tp->ocpl.OPENOptions & - ~(PASS_ADAPTER_MAC_FRAMES - | PASS_ATTENTION_FRAMES - | PASS_BEACON_MAC_FRAMES - | COPY_ALL_MAC_FRAMES - | COPY_ALL_NON_MAC_FRAMES); - - tp->ocpl.FunctAddr = 0; - - if(dev->flags & IFF_PROMISC) - /* Enable promiscuous mode */ - OpenOptions |= COPY_ALL_NON_MAC_FRAMES | - COPY_ALL_MAC_FRAMES; - else - { - if(dev->flags & IFF_ALLMULTI) - { - /* Disable promiscuous mode, use normal mode. */ - tp->ocpl.FunctAddr = 0xFFFFFFFF; - } - else - { - struct netdev_hw_addr *ha; - - netdev_for_each_mc_addr(ha, dev) { - ((char *)(&tp->ocpl.FunctAddr))[0] |= - ha->addr[2]; - ((char *)(&tp->ocpl.FunctAddr))[1] |= - ha->addr[3]; - ((char *)(&tp->ocpl.FunctAddr))[2] |= - ha->addr[4]; - ((char *)(&tp->ocpl.FunctAddr))[3] |= - ha->addr[5]; - } - } - tms380tr_exec_cmd(dev, OC_SET_FUNCT_ADDR); - } - - tp->ocpl.OPENOptions = OpenOptions; - tms380tr_exec_cmd(dev, OC_MODIFY_OPEN_PARMS); -} - -/* - * Wait for some time (microseconds) - */ -void tms380tr_wait(unsigned long time) -{ -#if 0 - long tmp; - - tmp = jiffies + time/(1000000/HZ); - do { - tmp = schedule_timeout_interruptible(tmp); - } while(time_after(tmp, jiffies)); -#else - mdelay(time / 1000); -#endif -} - -/* - * Write a command value to the SIFCMD register - */ -static void tms380tr_exec_sifcmd(struct net_device *dev, unsigned int WriteValue) -{ - unsigned short cmd; - unsigned short SifStsValue; - unsigned long loop_counter; - - WriteValue = ((WriteValue ^ CMD_SYSTEM_IRQ) | CMD_INTERRUPT_ADAPTER); - cmd = (unsigned short)WriteValue; - loop_counter = 0,5 * 800000; - do { - SifStsValue = SIFREADW(SIFSTS); - } while((SifStsValue & CMD_INTERRUPT_ADAPTER) && loop_counter--); - SIFWRITEW(cmd, SIFCMD); -} - -/* - * Processes adapter hardware reset, halts adapter and downloads firmware, - * clears the halt bit. - */ -static int tms380tr_reset_adapter(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned short *fw_ptr; - unsigned short count, c, count2; - const struct firmware *fw_entry = NULL; - - if (request_firmware(&fw_entry, "tms380tr.bin", tp->pdev) != 0) { - printk(KERN_ALERT "%s: firmware %s is missing, cannot start.\n", - dev->name, "tms380tr.bin"); - return -1; - } - - fw_ptr = (unsigned short *)fw_entry->data; - count2 = fw_entry->size / 2; - - /* Hardware adapter reset */ - SIFWRITEW(ACL_ARESET, SIFACL); - tms380tr_wait(40); - - c = SIFREADW(SIFACL); - tms380tr_wait(20); - - if(dev->dma == 0) /* For PCI adapters */ - { - c &= ~(ACL_NSELOUT0 | ACL_NSELOUT1); /* Clear bits */ - if(tp->setnselout) - c |= (*tp->setnselout)(dev); - } - - /* In case a command is pending - forget it */ - tp->ScbInUse = 0; - - c &= ~ACL_ARESET; /* Clear adapter reset bit */ - c |= ACL_CPHALT; /* Halt adapter CPU, allow download */ - c |= ACL_BOOT; - c |= ACL_SINTEN; - c &= ~ACL_PSDMAEN; /* Clear pseudo dma bit */ - SIFWRITEW(c, SIFACL); - tms380tr_wait(40); - - count = 0; - /* Download firmware via DIO interface: */ - do { - if (count2 < 3) continue; - - /* Download first address part */ - SIFWRITEW(*fw_ptr, SIFADX); - fw_ptr++; - count2--; - /* Download second address part */ - SIFWRITEW(*fw_ptr, SIFADD); - fw_ptr++; - count2--; - - if((count = *fw_ptr) != 0) /* Load loop counter */ - { - fw_ptr++; /* Download block data */ - count2--; - if (count > count2) continue; - - for(; count > 0; count--) - { - SIFWRITEW(*fw_ptr, SIFINC); - fw_ptr++; - count2--; - } - } - else /* Stop, if last block downloaded */ - { - c = SIFREADW(SIFACL); - c &= (~ACL_CPHALT | ACL_SINTEN); - - /* Clear CPHALT and start BUD */ - SIFWRITEW(c, SIFACL); - release_firmware(fw_entry); - return 1; - } - } while(count == 0); - - release_firmware(fw_entry); - printk(KERN_INFO "%s: Adapter Download Failed\n", dev->name); - return -1; -} - -MODULE_FIRMWARE("tms380tr.bin"); - -/* - * Starts bring up diagnostics of token ring adapter and evaluates - * diagnostic results. - */ -static int tms380tr_bringup_diags(struct net_device *dev) -{ - int loop_cnt, retry_cnt; - unsigned short Status; - - tms380tr_wait(HALF_SECOND); - tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET); - tms380tr_wait(HALF_SECOND); - - retry_cnt = BUD_MAX_RETRIES; /* maximal number of retrys */ - - do { - retry_cnt--; - if(tms380tr_debug > 3) - printk(KERN_DEBUG "BUD-Status: "); - loop_cnt = BUD_MAX_LOOPCNT; /* maximum: three seconds*/ - do { /* Inspect BUD results */ - loop_cnt--; - tms380tr_wait(HALF_SECOND); - Status = SIFREADW(SIFSTS); - Status &= STS_MASK; - - if(tms380tr_debug > 3) - printk(KERN_DEBUG " %04X\n", Status); - /* BUD successfully completed */ - if(Status == STS_INITIALIZE) - return 1; - /* Unrecoverable hardware error, BUD not completed? */ - } while((loop_cnt > 0) && ((Status & (STS_ERROR | STS_TEST)) - != (STS_ERROR | STS_TEST))); - - /* Error preventing completion of BUD */ - if(retry_cnt > 0) - { - printk(KERN_INFO "%s: Adapter Software Reset.\n", - dev->name); - tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET); - tms380tr_wait(HALF_SECOND); - } - } while(retry_cnt > 0); - - Status = SIFREADW(SIFSTS); - - printk(KERN_INFO "%s: Hardware error\n", dev->name); - /* Hardware error occurred! */ - Status &= 0x001f; - if (Status & 0x0010) - printk(KERN_INFO "%s: BUD Error: Timeout\n", dev->name); - else if ((Status & 0x000f) > 6) - printk(KERN_INFO "%s: BUD Error: Illegal Failure\n", dev->name); - else - printk(KERN_INFO "%s: Bring Up Diagnostics Error (%04X) occurred\n", dev->name, Status & 0x000f); - - return -1; -} - -/* - * Copy initialisation data to adapter memory, beginning at address - * 1:0A00; Starting DMA test and evaluating result bits. - */ -static int tms380tr_init_adapter(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - const unsigned char SCB_Test[6] = {0x00, 0x00, 0xC1, 0xE2, 0xD4, 0x8B}; - const unsigned char SSB_Test[8] = {0xFF, 0xFF, 0xD1, 0xD7, - 0xC5, 0xD9, 0xC3, 0xD4}; - void *ptr = (void *)&tp->ipb; - unsigned short *ipb_ptr = (unsigned short *)ptr; - unsigned char *cb_ptr = (unsigned char *) &tp->scb; - unsigned char *sb_ptr = (unsigned char *) &tp->ssb; - unsigned short Status; - int i, loop_cnt, retry_cnt; - - /* Normalize: byte order low/high, word order high/low! (only IPB!) */ - tp->ipb.SCB_Addr = SWAPW(((char *)&tp->scb - (char *)tp) + tp->dmabuffer); - tp->ipb.SSB_Addr = SWAPW(((char *)&tp->ssb - (char *)tp) + tp->dmabuffer); - - if(tms380tr_debug > 3) - { - printk(KERN_DEBUG "%s: buffer (real): %lx\n", dev->name, (long) &tp->scb); - printk(KERN_DEBUG "%s: buffer (virt): %lx\n", dev->name, (long) ((char *)&tp->scb - (char *)tp) + (long) tp->dmabuffer); - printk(KERN_DEBUG "%s: buffer (DMA) : %lx\n", dev->name, (long) tp->dmabuffer); - printk(KERN_DEBUG "%s: buffer (tp) : %lx\n", dev->name, (long) tp); - } - /* Maximum: three initialization retries */ - retry_cnt = INIT_MAX_RETRIES; - - do { - retry_cnt--; - - /* Transfer initialization block */ - SIFWRITEW(0x0001, SIFADX); - - /* To address 0001:0A00 of adapter RAM */ - SIFWRITEW(0x0A00, SIFADD); - - /* Write 11 words to adapter RAM */ - for(i = 0; i < 11; i++) - SIFWRITEW(ipb_ptr[i], SIFINC); - - /* Execute SCB adapter command */ - tms380tr_exec_sifcmd(dev, CMD_EXECUTE); - - loop_cnt = INIT_MAX_LOOPCNT; /* Maximum: 11 seconds */ - - /* While remaining retries, no error and not completed */ - do { - Status = 0; - loop_cnt--; - tms380tr_wait(HALF_SECOND); - - /* Mask interesting status bits */ - Status = SIFREADW(SIFSTS); - Status &= STS_MASK; - } while(((Status &(STS_INITIALIZE | STS_ERROR | STS_TEST)) != 0) && - ((Status & STS_ERROR) == 0) && (loop_cnt != 0)); - - if((Status & (STS_INITIALIZE | STS_ERROR | STS_TEST)) == 0) - { - /* Initialization completed without error */ - i = 0; - do { /* Test if contents of SCB is valid */ - if(SCB_Test[i] != *(cb_ptr + i)) - { - printk(KERN_INFO "%s: DMA failed\n", dev->name); - /* DMA data error: wrong data in SCB */ - return -1; - } - i++; - } while(i < 6); - - i = 0; - do { /* Test if contents of SSB is valid */ - if(SSB_Test[i] != *(sb_ptr + i)) - /* DMA data error: wrong data in SSB */ - return -1; - i++; - } while (i < 8); - - return 1; /* Adapter successfully initialized */ - } - else - { - if((Status & STS_ERROR) != 0) - { - /* Initialization error occurred */ - Status = SIFREADW(SIFSTS); - Status &= STS_ERROR_MASK; - /* ShowInitialisationErrorCode(Status); */ - printk(KERN_INFO "%s: Status error: %d\n", dev->name, Status); - return -1; /* Unrecoverable error */ - } - else - { - if(retry_cnt > 0) - { - /* Reset adapter and try init again */ - tms380tr_exec_sifcmd(dev, EXEC_SOFT_RESET); - tms380tr_wait(HALF_SECOND); - } - } - } - } while(retry_cnt > 0); - - printk(KERN_INFO "%s: Retry exceeded\n", dev->name); - return -1; -} - -/* - * Check for outstanding commands in command queue and tries to execute - * command immediately. Corresponding command flag in command queue is cleared. - */ -static void tms380tr_chk_outstanding_cmds(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned long Addr = 0; - - if(tp->CMDqueue == 0) - return; /* No command execution */ - - /* If SCB in use: no command */ - if(tp->ScbInUse == 1) - return; - - /* Check if adapter is opened, avoiding COMMAND_REJECT - * interrupt by the adapter! - */ - if (tp->AdapterOpenFlag == 0) { - if (tp->CMDqueue & OC_OPEN) { - /* Execute OPEN command */ - tp->CMDqueue ^= OC_OPEN; - - Addr = htonl(((char *)&tp->ocpl - (char *)tp) + tp->dmabuffer); - tp->scb.Parm[0] = LOWORD(Addr); - tp->scb.Parm[1] = HIWORD(Addr); - tp->scb.CMD = OPEN; - } else - /* No OPEN command queued, but adapter closed. Note: - * We'll try to re-open the adapter in DriverPoll() - */ - return; /* No adapter command issued */ - } else { - /* Adapter is open; evaluate command queue: try to execute - * outstanding commands (depending on priority!) CLOSE - * command queued - */ - if (tp->CMDqueue & OC_CLOSE) { - tp->CMDqueue ^= OC_CLOSE; - tp->AdapterOpenFlag = 0; - tp->scb.Parm[0] = 0; /* Parm[0], Parm[1] are ignored */ - tp->scb.Parm[1] = 0; /* but should be set to zero! */ - tp->scb.CMD = CLOSE; - if(!tp->HaltInProgress) - tp->CMDqueue |= OC_OPEN; /* re-open adapter */ - else - tp->CMDqueue = 0; /* no more commands */ - } else if (tp->CMDqueue & OC_RECEIVE) { - tp->CMDqueue ^= OC_RECEIVE; - Addr = htonl(((char *)tp->RplHead - (char *)tp) + tp->dmabuffer); - tp->scb.Parm[0] = LOWORD(Addr); - tp->scb.Parm[1] = HIWORD(Addr); - tp->scb.CMD = RECEIVE; - } else if (tp->CMDqueue & OC_TRANSMIT_HALT) { - /* NOTE: TRANSMIT.HALT must be checked - * before TRANSMIT. - */ - tp->CMDqueue ^= OC_TRANSMIT_HALT; - tp->scb.CMD = TRANSMIT_HALT; - - /* Parm[0] and Parm[1] are ignored - * but should be set to zero! - */ - tp->scb.Parm[0] = 0; - tp->scb.Parm[1] = 0; - } else if (tp->CMDqueue & OC_TRANSMIT) { - /* NOTE: TRANSMIT must be - * checked after TRANSMIT.HALT - */ - if (tp->TransmitCommandActive) { - if (!tp->TransmitHaltScheduled) { - tp->TransmitHaltScheduled = 1; - tms380tr_exec_cmd(dev, OC_TRANSMIT_HALT); - } - tp->TransmitCommandActive = 0; - return; - } - - tp->CMDqueue ^= OC_TRANSMIT; - tms380tr_cancel_tx_queue(tp); - Addr = htonl(((char *)tp->TplBusy - (char *)tp) + tp->dmabuffer); - tp->scb.Parm[0] = LOWORD(Addr); - tp->scb.Parm[1] = HIWORD(Addr); - tp->scb.CMD = TRANSMIT; - tp->TransmitCommandActive = 1; - } else if (tp->CMDqueue & OC_MODIFY_OPEN_PARMS) { - tp->CMDqueue ^= OC_MODIFY_OPEN_PARMS; - tp->scb.Parm[0] = tp->ocpl.OPENOptions; /* new OPEN options*/ - tp->scb.Parm[0] |= ENABLE_FULL_DUPLEX_SELECTION; - tp->scb.Parm[1] = 0; /* is ignored but should be zero */ - tp->scb.CMD = MODIFY_OPEN_PARMS; - } else if (tp->CMDqueue & OC_SET_FUNCT_ADDR) { - tp->CMDqueue ^= OC_SET_FUNCT_ADDR; - tp->scb.Parm[0] = LOWORD(tp->ocpl.FunctAddr); - tp->scb.Parm[1] = HIWORD(tp->ocpl.FunctAddr); - tp->scb.CMD = SET_FUNCT_ADDR; - } else if (tp->CMDqueue & OC_SET_GROUP_ADDR) { - tp->CMDqueue ^= OC_SET_GROUP_ADDR; - tp->scb.Parm[0] = LOWORD(tp->ocpl.GroupAddr); - tp->scb.Parm[1] = HIWORD(tp->ocpl.GroupAddr); - tp->scb.CMD = SET_GROUP_ADDR; - } else if (tp->CMDqueue & OC_READ_ERROR_LOG) { - tp->CMDqueue ^= OC_READ_ERROR_LOG; - Addr = htonl(((char *)&tp->errorlogtable - (char *)tp) + tp->dmabuffer); - tp->scb.Parm[0] = LOWORD(Addr); - tp->scb.Parm[1] = HIWORD(Addr); - tp->scb.CMD = READ_ERROR_LOG; - } else { - printk(KERN_WARNING "CheckForOutstandingCommand: unknown Command\n"); - tp->CMDqueue = 0; - return; - } - } - - tp->ScbInUse = 1; /* Set semaphore: SCB in use. */ - - /* Execute SCB and generate IRQ when done. */ - tms380tr_exec_sifcmd(dev, CMD_EXECUTE | CMD_SCB_REQUEST); -} - -/* - * IRQ conditions: signal loss on the ring, transmit or receive of beacon - * frames (disabled if bit 1 of OPEN option is set); report error MAC - * frame transmit (disabled if bit 2 of OPEN option is set); open or short - * circuit fault on the lobe is detected; remove MAC frame received; - * error counter overflow (255); opened adapter is the only station in ring. - * After some of the IRQs the adapter is closed! - */ -static void tms380tr_ring_status_irq(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - - tp->CurrentRingStatus = be16_to_cpu((unsigned short)tp->ssb.Parm[0]); - - /* First: fill up statistics */ - if(tp->ssb.Parm[0] & SIGNAL_LOSS) - { - printk(KERN_INFO "%s: Signal Loss\n", dev->name); - tp->MacStat.line_errors++; - } - - /* Adapter is closed, but initialized */ - if(tp->ssb.Parm[0] & LOBE_WIRE_FAULT) - { - printk(KERN_INFO "%s: Lobe Wire Fault, Reopen Adapter\n", - dev->name); - tp->MacStat.line_errors++; - } - - if(tp->ssb.Parm[0] & RING_RECOVERY) - printk(KERN_INFO "%s: Ring Recovery\n", dev->name); - - /* Counter overflow: read error log */ - if(tp->ssb.Parm[0] & COUNTER_OVERFLOW) - { - printk(KERN_INFO "%s: Counter Overflow\n", dev->name); - tms380tr_exec_cmd(dev, OC_READ_ERROR_LOG); - } - - /* Adapter is closed, but initialized */ - if(tp->ssb.Parm[0] & REMOVE_RECEIVED) - printk(KERN_INFO "%s: Remove Received, Reopen Adapter\n", - dev->name); - - /* Adapter is closed, but initialized */ - if(tp->ssb.Parm[0] & AUTO_REMOVAL_ERROR) - printk(KERN_INFO "%s: Auto Removal Error, Reopen Adapter\n", - dev->name); - - if(tp->ssb.Parm[0] & HARD_ERROR) - printk(KERN_INFO "%s: Hard Error\n", dev->name); - - if(tp->ssb.Parm[0] & SOFT_ERROR) - printk(KERN_INFO "%s: Soft Error\n", dev->name); - - if(tp->ssb.Parm[0] & TRANSMIT_BEACON) - printk(KERN_INFO "%s: Transmit Beacon\n", dev->name); - - if(tp->ssb.Parm[0] & SINGLE_STATION) - printk(KERN_INFO "%s: Single Station\n", dev->name); - - /* Check if adapter has been closed */ - if(tp->ssb.Parm[0] & ADAPTER_CLOSED) - { - printk(KERN_INFO "%s: Adapter closed (Reopening)," - "CurrentRingStat %x\n", - dev->name, tp->CurrentRingStatus); - tp->AdapterOpenFlag = 0; - tms380tr_open_adapter(dev); - } -} - -/* - * Issued if adapter has encountered an unrecoverable hardware - * or software error. - */ -static void tms380tr_chk_irq(struct net_device *dev) -{ - int i; - unsigned short AdapterCheckBlock[4]; - struct net_local *tp = netdev_priv(dev); - - tp->AdapterOpenFlag = 0; /* Adapter closed now */ - - /* Page number of adapter memory */ - SIFWRITEW(0x0001, SIFADX); - /* Address offset */ - SIFWRITEW(CHECKADDR, SIFADR); - - /* Reading 8 byte adapter check block. */ - for(i = 0; i < 4; i++) - AdapterCheckBlock[i] = SIFREADW(SIFINC); - - if(tms380tr_debug > 3) - { - printk(KERN_DEBUG "%s: AdapterCheckBlock: ", dev->name); - for (i = 0; i < 4; i++) - printk("%04X", AdapterCheckBlock[i]); - printk("\n"); - } - - switch(AdapterCheckBlock[0]) - { - case DIO_PARITY: - printk(KERN_INFO "%s: DIO parity error\n", dev->name); - break; - - case DMA_READ_ABORT: - printk(KERN_INFO "%s DMA read operation aborted:\n", - dev->name); - switch (AdapterCheckBlock[1]) - { - case 0: - printk(KERN_INFO "Timeout\n"); - printk(KERN_INFO "Address: %04X %04X\n", - AdapterCheckBlock[2], - AdapterCheckBlock[3]); - break; - - case 1: - printk(KERN_INFO "Parity error\n"); - printk(KERN_INFO "Address: %04X %04X\n", - AdapterCheckBlock[2], - AdapterCheckBlock[3]); - break; - - case 2: - printk(KERN_INFO "Bus error\n"); - printk(KERN_INFO "Address: %04X %04X\n", - AdapterCheckBlock[2], - AdapterCheckBlock[3]); - break; - - default: - printk(KERN_INFO "Unknown error.\n"); - break; - } - break; - - case DMA_WRITE_ABORT: - printk(KERN_INFO "%s: DMA write operation aborted:\n", - dev->name); - switch (AdapterCheckBlock[1]) - { - case 0: - printk(KERN_INFO "Timeout\n"); - printk(KERN_INFO "Address: %04X %04X\n", - AdapterCheckBlock[2], - AdapterCheckBlock[3]); - break; - - case 1: - printk(KERN_INFO "Parity error\n"); - printk(KERN_INFO "Address: %04X %04X\n", - AdapterCheckBlock[2], - AdapterCheckBlock[3]); - break; - - case 2: - printk(KERN_INFO "Bus error\n"); - printk(KERN_INFO "Address: %04X %04X\n", - AdapterCheckBlock[2], - AdapterCheckBlock[3]); - break; - - default: - printk(KERN_INFO "Unknown error.\n"); - break; - } - break; - - case ILLEGAL_OP_CODE: - printk(KERN_INFO "%s: Illegal operation code in firmware\n", - dev->name); - /* Parm[0-3]: adapter internal register R13-R15 */ - break; - - case PARITY_ERRORS: - printk(KERN_INFO "%s: Adapter internal bus parity error\n", - dev->name); - /* Parm[0-3]: adapter internal register R13-R15 */ - break; - - case RAM_DATA_ERROR: - printk(KERN_INFO "%s: RAM data error\n", dev->name); - /* Parm[0-1]: MSW/LSW address of RAM location. */ - break; - - case RAM_PARITY_ERROR: - printk(KERN_INFO "%s: RAM parity error\n", dev->name); - /* Parm[0-1]: MSW/LSW address of RAM location. */ - break; - - case RING_UNDERRUN: - printk(KERN_INFO "%s: Internal DMA underrun detected\n", - dev->name); - break; - - case INVALID_IRQ: - printk(KERN_INFO "%s: Unrecognized interrupt detected\n", - dev->name); - /* Parm[0-3]: adapter internal register R13-R15 */ - break; - - case INVALID_ERROR_IRQ: - printk(KERN_INFO "%s: Unrecognized error interrupt detected\n", - dev->name); - /* Parm[0-3]: adapter internal register R13-R15 */ - break; - - case INVALID_XOP: - printk(KERN_INFO "%s: Unrecognized XOP request detected\n", - dev->name); - /* Parm[0-3]: adapter internal register R13-R15 */ - break; - - default: - printk(KERN_INFO "%s: Unknown status", dev->name); - break; - } - - if(tms380tr_chipset_init(dev) == 1) - { - /* Restart of firmware successful */ - tp->AdapterOpenFlag = 1; - } -} - -/* - * Internal adapter pointer to RAM data are copied from adapter into - * host system. - */ -static int tms380tr_read_ptr(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned short adapterram; - - tms380tr_read_ram(dev, (unsigned char *)&tp->intptrs.BurnedInAddrPtr, - ADAPTER_INT_PTRS, 16); - tms380tr_read_ram(dev, (unsigned char *)&adapterram, - cpu_to_be16((unsigned short)tp->intptrs.AdapterRAMPtr), 2); - return be16_to_cpu(adapterram); -} - -/* - * Reads a number of bytes from adapter to system memory. - */ -static void tms380tr_read_ram(struct net_device *dev, unsigned char *Data, - unsigned short Address, int Length) -{ - int i; - unsigned short old_sifadx, old_sifadr, InWord; - - /* Save the current values */ - old_sifadx = SIFREADW(SIFADX); - old_sifadr = SIFREADW(SIFADR); - - /* Page number of adapter memory */ - SIFWRITEW(0x0001, SIFADX); - /* Address offset in adapter RAM */ - SIFWRITEW(Address, SIFADR); - - /* Copy len byte from adapter memory to system data area. */ - i = 0; - for(;;) - { - InWord = SIFREADW(SIFINC); - - *(Data + i) = HIBYTE(InWord); /* Write first byte */ - if(++i == Length) /* All is done break */ - break; - - *(Data + i) = LOBYTE(InWord); /* Write second byte */ - if (++i == Length) /* All is done break */ - break; - } - - /* Restore original values */ - SIFWRITEW(old_sifadx, SIFADX); - SIFWRITEW(old_sifadr, SIFADR); -} - -/* - * Cancel all queued packets in the transmission queue. - */ -static void tms380tr_cancel_tx_queue(struct net_local* tp) -{ - TPL *tpl; - - /* - * NOTE: There must not be an active TRANSMIT command pending, when - * this function is called. - */ - if(tp->TransmitCommandActive) - return; - - for(;;) - { - tpl = tp->TplBusy; - if(!tpl->BusyFlag) - break; - /* "Remove" TPL from busy list. */ - tp->TplBusy = tpl->NextTPLPtr; - tms380tr_write_tpl_status(tpl, 0); /* Clear VALID bit */ - tpl->BusyFlag = 0; /* "free" TPL */ - - printk(KERN_INFO "Cancel tx (%08lXh).\n", (unsigned long)tpl); - if (tpl->DMABuff) - dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE); - dev_kfree_skb_any(tpl->Skb); - } -} - -/* - * This function is called whenever a transmit interrupt is generated by the - * adapter. For a command complete interrupt, it is checked if we have to - * issue a new transmit command or not. - */ -static void tms380tr_tx_status_irq(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned char HighByte, HighAc, LowAc; - TPL *tpl; - - /* NOTE: At this point the SSB from TRANSMIT STATUS is no longer - * available, because the CLEAR SSB command has already been issued. - * - * Process all complete transmissions. - */ - - for(;;) - { - tpl = tp->TplBusy; - if(!tpl->BusyFlag || (tpl->Status - & (TX_VALID | TX_FRAME_COMPLETE)) - != TX_FRAME_COMPLETE) - { - break; - } - - /* "Remove" TPL from busy list. */ - tp->TplBusy = tpl->NextTPLPtr ; - - /* Check the transmit status field only for directed frames*/ - if(DIRECTED_FRAME(tpl) && (tpl->Status & TX_ERROR) == 0) - { - HighByte = GET_TRANSMIT_STATUS_HIGH_BYTE(tpl->Status); - HighAc = GET_FRAME_STATUS_HIGH_AC(HighByte); - LowAc = GET_FRAME_STATUS_LOW_AC(HighByte); - - if((HighAc != LowAc) || (HighAc == AC_NOT_RECOGNIZED)) - { - printk(KERN_DEBUG "%s: (DA=%08lX not recognized)\n", - dev->name, - *(unsigned long *)&tpl->MData[2+2]); - } - else - { - if(tms380tr_debug > 3) - printk(KERN_DEBUG "%s: Directed frame tx'd\n", - dev->name); - } - } - else - { - if(!DIRECTED_FRAME(tpl)) - { - if(tms380tr_debug > 3) - printk(KERN_DEBUG "%s: Broadcast frame tx'd\n", - dev->name); - } - } - - tp->MacStat.tx_packets++; - if (tpl->DMABuff) - dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE); - dev_kfree_skb_irq(tpl->Skb); - tpl->BusyFlag = 0; /* "free" TPL */ - } - - if(!tp->TplFree->NextTPLPtr->BusyFlag) - netif_wake_queue(dev); -} - -/* - * Called if a frame receive interrupt is generated by the adapter. - * Check if the frame is valid and indicate it to system. - */ -static void tms380tr_rcv_status_irq(struct net_device *dev) -{ - struct net_local *tp = netdev_priv(dev); - unsigned char *ReceiveDataPtr; - struct sk_buff *skb; - unsigned int Length, Length2; - RPL *rpl; - RPL *SaveHead; - dma_addr_t dmabuf; - - /* NOTE: At this point the SSB from RECEIVE STATUS is no longer - * available, because the CLEAR SSB command has already been issued. - * - * Process all complete receives. - */ - - for(;;) - { - rpl = tp->RplHead; - if(rpl->Status & RX_VALID) - break; /* RPL still in use by adapter */ - - /* Forward RPLHead pointer to next list. */ - SaveHead = tp->RplHead; - tp->RplHead = rpl->NextRPLPtr; - - /* Get the frame size (Byte swap for Intel). - * Do this early (see workaround comment below) - */ - Length = be16_to_cpu(rpl->FrameSize); - - /* Check if the Frame_Start, Frame_End and - * Frame_Complete bits are set. - */ - if((rpl->Status & VALID_SINGLE_BUFFER_FRAME) - == VALID_SINGLE_BUFFER_FRAME) - { - ReceiveDataPtr = rpl->MData; - - /* Workaround for delayed write of FrameSize on ISA - * (FrameSize is false but valid-bit is reset) - * Frame size is set to zero when the RPL is freed. - * Length2 is there because there have also been - * cases where the FrameSize was partially written - */ - Length2 = be16_to_cpu(rpl->FrameSize); - - if(Length == 0 || Length != Length2) - { - tp->RplHead = SaveHead; - break; /* Return to tms380tr_interrupt */ - } - tms380tr_update_rcv_stats(tp,ReceiveDataPtr,Length); - - if(tms380tr_debug > 3) - printk(KERN_DEBUG "%s: Packet Length %04X (%d)\n", - dev->name, Length, Length); - - /* Indicate the received frame to system the - * adapter does the Source-Routing padding for - * us. See: OpenOptions in tms380tr_init_opb() - */ - skb = rpl->Skb; - if(rpl->SkbStat == SKB_UNAVAILABLE) - { - /* Try again to allocate skb */ - skb = dev_alloc_skb(tp->MaxPacketSize); - if(skb == NULL) - { - /* Update Stats ?? */ - } - else - { - skb_put(skb, tp->MaxPacketSize); - rpl->SkbStat = SKB_DATA_COPY; - ReceiveDataPtr = rpl->MData; - } - } - - if(skb && (rpl->SkbStat == SKB_DATA_COPY || - rpl->SkbStat == SKB_DMA_DIRECT)) - { - if(rpl->SkbStat == SKB_DATA_COPY) - skb_copy_to_linear_data(skb, ReceiveDataPtr, - Length); - - /* Deliver frame to system */ - rpl->Skb = NULL; - skb_trim(skb,Length); - skb->protocol = tr_type_trans(skb,dev); - netif_rx(skb); - } - } - else /* Invalid frame */ - { - if(rpl->Skb != NULL) - dev_kfree_skb_irq(rpl->Skb); - - /* Skip list. */ - if(rpl->Status & RX_START_FRAME) - /* Frame start bit is set -> overflow. */ - tp->MacStat.rx_errors++; - } - if (rpl->DMABuff) - dma_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, DMA_TO_DEVICE); - rpl->DMABuff = 0; - - /* Allocate new skb for rpl */ - rpl->Skb = dev_alloc_skb(tp->MaxPacketSize); - /* skb == NULL ? then use local buffer */ - if(rpl->Skb == NULL) - { - rpl->SkbStat = SKB_UNAVAILABLE; - rpl->FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[rpl->RPLIndex] - (char *)tp) + tp->dmabuffer); - rpl->MData = tp->LocalRxBuffers[rpl->RPLIndex]; - } - else /* skb != NULL */ - { - rpl->Skb->dev = dev; - skb_put(rpl->Skb, tp->MaxPacketSize); - - /* Data unreachable for DMA ? then use local buffer */ - dmabuf = dma_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE); - if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit)) - { - rpl->SkbStat = SKB_DATA_COPY; - rpl->FragList[0].DataAddr = htonl(((char *)tp->LocalRxBuffers[rpl->RPLIndex] - (char *)tp) + tp->dmabuffer); - rpl->MData = tp->LocalRxBuffers[rpl->RPLIndex]; - } - else - { - /* DMA directly in skb->data */ - rpl->SkbStat = SKB_DMA_DIRECT; - rpl->FragList[0].DataAddr = htonl(dmabuf); - rpl->MData = rpl->Skb->data; - rpl->DMABuff = dmabuf; - } - } - - rpl->FragList[0].DataCount = cpu_to_be16((unsigned short)tp->MaxPacketSize); - rpl->FrameSize = 0; - - /* Pass the last RPL back to the adapter */ - tp->RplTail->FrameSize = 0; - - /* Reset the CSTAT field in the list. */ - tms380tr_write_rpl_status(tp->RplTail, RX_VALID | RX_FRAME_IRQ); - - /* Current RPL becomes last one in list. */ - tp->RplTail = tp->RplTail->NextRPLPtr; - - /* Inform adapter about RPL valid. */ - tms380tr_exec_sifcmd(dev, CMD_RX_VALID); - } -} - -/* - * This function should be used whenever the status of any RPL must be - * modified by the driver, because the compiler may otherwise change the - * order of instructions such that writing the RPL status may be executed - * at an undesirable time. When this function is used, the status is - * always written when the function is called. - */ -static void tms380tr_write_rpl_status(RPL *rpl, unsigned int Status) -{ - rpl->Status = Status; -} - -/* - * The function updates the statistic counters in mac->MacStat. - * It differtiates between directed and broadcast/multicast ( ==functional) - * frames. - */ -static void tms380tr_update_rcv_stats(struct net_local *tp, unsigned char DataPtr[], - unsigned int Length) -{ - tp->MacStat.rx_packets++; - tp->MacStat.rx_bytes += Length; - - /* Test functional bit */ - if(DataPtr[2] & GROUP_BIT) - tp->MacStat.multicast++; -} - -static int tms380tr_set_mac_address(struct net_device *dev, void *addr) -{ - struct net_local *tp = netdev_priv(dev); - struct sockaddr *saddr = addr; - - if (tp->AdapterOpenFlag || tp->AdapterVirtOpenFlag) { - printk(KERN_WARNING "%s: Cannot set MAC/LAA address while card is open\n", dev->name); - return -EIO; - } - memcpy(dev->dev_addr, saddr->sa_data, dev->addr_len); - return 0; -} - -#if TMS380TR_DEBUG > 0 -/* - * Dump Packet (data) - */ -static void tms380tr_dump(unsigned char *Data, int length) -{ - int i, j; - - for (i = 0, j = 0; i < length / 8; i++, j += 8) - { - printk(KERN_DEBUG "%02x %02x %02x %02x %02x %02x %02x %02x\n", - Data[j+0],Data[j+1],Data[j+2],Data[j+3], - Data[j+4],Data[j+5],Data[j+6],Data[j+7]); - } -} -#endif - -void tmsdev_term(struct net_device *dev) -{ - struct net_local *tp; - - tp = netdev_priv(dev); - dma_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local), - DMA_BIDIRECTIONAL); -} - -const struct net_device_ops tms380tr_netdev_ops = { - .ndo_open = tms380tr_open, - .ndo_stop = tms380tr_close, - .ndo_start_xmit = tms380tr_send_packet, - .ndo_tx_timeout = tms380tr_timeout, - .ndo_get_stats = tms380tr_get_stats, - .ndo_set_rx_mode = tms380tr_set_multicast_list, - .ndo_set_mac_address = tms380tr_set_mac_address, -}; -EXPORT_SYMBOL(tms380tr_netdev_ops); - -int tmsdev_init(struct net_device *dev, struct device *pdev) -{ - struct net_local *tms_local; - - memset(netdev_priv(dev), 0, sizeof(struct net_local)); - tms_local = netdev_priv(dev); - init_waitqueue_head(&tms_local->wait_for_tok_int); - if (pdev->dma_mask) - tms_local->dmalimit = *pdev->dma_mask; - else - return -ENOMEM; - tms_local->pdev = pdev; - tms_local->dmabuffer = dma_map_single(pdev, (void *)tms_local, - sizeof(struct net_local), DMA_BIDIRECTIONAL); - if (tms_local->dmabuffer + sizeof(struct net_local) > - tms_local->dmalimit) - { - printk(KERN_INFO "%s: Memory not accessible for DMA\n", - dev->name); - tmsdev_term(dev); - return -ENOMEM; - } - - dev->netdev_ops = &tms380tr_netdev_ops; - dev->watchdog_timeo = HZ; - - return 0; -} - -EXPORT_SYMBOL(tms380tr_open); -EXPORT_SYMBOL(tms380tr_close); -EXPORT_SYMBOL(tms380tr_interrupt); -EXPORT_SYMBOL(tmsdev_init); -EXPORT_SYMBOL(tmsdev_term); -EXPORT_SYMBOL(tms380tr_wait); - -#ifdef MODULE - -static struct module *TMS380_module = NULL; - -int init_module(void) -{ - printk(KERN_DEBUG "%s", version); - - TMS380_module = &__this_module; - return 0; -} - -void cleanup_module(void) -{ - TMS380_module = NULL; -} -#endif - -MODULE_LICENSE("GPL"); - diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h deleted file mode 100644 index e5a617c586c2..000000000000 --- a/drivers/net/tokenring/tms380tr.h +++ /dev/null @@ -1,1141 +0,0 @@ -/* - * tms380tr.h: TI TMS380 Token Ring driver for Linux - * - * Authors: - * - Christoph Goos <cgoos@syskonnect.de> - * - Adam Fritzler - */ - -#ifndef __LINUX_TMS380TR_H -#define __LINUX_TMS380TR_H - -#ifdef __KERNEL__ - -#include <linux/interrupt.h> - -/* module prototypes */ -extern const struct net_device_ops tms380tr_netdev_ops; -int tms380tr_open(struct net_device *dev); -int tms380tr_close(struct net_device *dev); -irqreturn_t tms380tr_interrupt(int irq, void *dev_id); -int tmsdev_init(struct net_device *dev, struct device *pdev); -void tmsdev_term(struct net_device *dev); -void tms380tr_wait(unsigned long time); - -#define TMS380TR_MAX_ADAPTERS 7 - -#define SEND_TIMEOUT 10*HZ - -#define TR_RCF_LONGEST_FRAME_MASK 0x0070 -#define TR_RCF_FRAME4K 0x0030 - -/*------------------------------------------------------------------*/ -/* Bit order for adapter communication with DMA */ -/* -------------------------------------------------------------- */ -/* Bit 8 | 9| 10| 11|| 12| 13| 14| 15|| 0| 1| 2| 3|| 4| 5| 6| 7| */ -/* -------------------------------------------------------------- */ -/* The bytes in a word must be byte swapped. Also, if a double */ -/* word is used for storage, then the words, as well as the bytes, */ -/* must be swapped. */ -/* Bit order for adapter communication with DIO */ -/* -------------------------------------------------------------- */ -/* Bit 0 | 1| 2| 3|| 4| 5| 6| 7|| 8| 9| 10| 11|| 12| 13| 14| 15| */ -/* -------------------------------------------------------------- */ -/*------------------------------------------------------------------*/ - -/* Swap words of a long. */ -#define SWAPW(x) (((x) << 16) | ((x) >> 16)) - -/* Get the low byte of a word. */ -#define LOBYTE(w) ((unsigned char)(w)) - -/* Get the high byte of a word. */ -#define HIBYTE(w) ((unsigned char)((unsigned short)(w) >> 8)) - -/* Get the low word of a long. */ -#define LOWORD(l) ((unsigned short)(l)) - -/* Get the high word of a long. */ -#define HIWORD(l) ((unsigned short)((unsigned long)(l) >> 16)) - - - -/* Token ring adapter I/O addresses for normal mode. */ - -/* - * The SIF registers. Common to all adapters. - */ -/* Basic SIF (SRSX = 0) */ -#define SIFDAT 0x00 /* SIF/DMA data. */ -#define SIFINC 0x02 /* IO Word data with auto increment. */ -#define SIFINH 0x03 /* IO Byte data with auto increment. */ -#define SIFADR 0x04 /* SIF/DMA Address. */ -#define SIFCMD 0x06 /* SIF Command. */ -#define SIFSTS 0x06 /* SIF Status. */ - -/* "Extended" SIF (SRSX = 1) */ -#define SIFACL 0x08 /* SIF Adapter Control Register. */ -#define SIFADD 0x0a /* SIF/DMA Address. -- 0x0a */ -#define SIFADX 0x0c /* 0x0c */ -#define DMALEN 0x0e /* SIF DMA length. -- 0x0e */ - -/* - * POS Registers. Only for ISA Adapters. - */ -#define POSREG 0x10 /* Adapter Program Option Select (POS) - * Register: base IO address + 16 byte. - */ -#define POSREG_2 24L /* only for TR4/16+ adapter - * base IO address + 24 byte. -- 0x18 - */ - -/* SIFCMD command codes (high-low) */ -#define CMD_INTERRUPT_ADAPTER 0x8000 /* Cause internal adapter interrupt */ -#define CMD_ADAPTER_RESET 0x4000 /* Hardware reset of adapter */ -#define CMD_SSB_CLEAR 0x2000 /* Acknowledge to adapter to - * system interrupts. - */ -#define CMD_EXECUTE 0x1000 /* Execute SCB command */ -#define CMD_SCB_REQUEST 0x0800 /* Request adapter to interrupt - * system when SCB is available for - * another command. - */ -#define CMD_RX_CONTINUE 0x0400 /* Continue receive after odd pointer - * stop. (odd pointer receive method) - */ -#define CMD_RX_VALID 0x0200 /* Now actual RPL is valid. */ -#define CMD_TX_VALID 0x0100 /* Now actual TPL is valid. (valid - * bit receive/transmit method) - */ -#define CMD_SYSTEM_IRQ 0x0080 /* Adapter-to-attached-system - * interrupt is reset. - */ -#define CMD_CLEAR_SYSTEM_IRQ 0x0080 /* Clear SYSTEM_INTERRUPT bit. - * (write: 1=ignore, 0=reset) - */ -#define EXEC_SOFT_RESET 0xFF00 /* adapter soft reset. (restart - * adapter after hardware reset) - */ - - -/* ACL commands (high-low) */ -#define ACL_SWHLDA 0x0800 /* Software hold acknowledge. */ -#define ACL_SWDDIR 0x0400 /* Data transfer direction. */ -#define ACL_SWHRQ 0x0200 /* Pseudo DMA operation. */ -#define ACL_PSDMAEN 0x0100 /* Enable pseudo system DMA. */ -#define ACL_ARESET 0x0080 /* Adapter hardware reset command. - * (held in reset condition as - * long as bit is set) - */ -#define ACL_CPHALT 0x0040 /* Communication processor halt. - * (can only be set while ACL_ARESET - * bit is set; prevents adapter - * processor from executing code while - * downloading firmware) - */ -#define ACL_BOOT 0x0020 -#define ACL_SINTEN 0x0008 /* System interrupt enable/disable - * (1/0): can be written if ACL_ARESET - * is zero. - */ -#define ACL_PEN 0x0004 - -#define ACL_NSELOUT0 0x0002 -#define ACL_NSELOUT1 0x0001 /* NSELOUTx have a card-specific - * meaning for setting ring speed. - */ - -#define PS_DMA_MASK (ACL_SWHRQ | ACL_PSDMAEN) - - -/* SIFSTS register return codes (high-low) */ -#define STS_SYSTEM_IRQ 0x0080 /* Adapter-to-attached-system - * interrupt is valid. - */ -#define STS_INITIALIZE 0x0040 /* INITIALIZE status. (ready to - * initialize) - */ -#define STS_TEST 0x0020 /* TEST status. (BUD not completed) */ -#define STS_ERROR 0x0010 /* ERROR status. (unrecoverable - * HW error occurred) - */ -#define STS_MASK 0x00F0 /* Mask interesting status bits. */ -#define STS_ERROR_MASK 0x000F /* Get Error Code by masking the - * interrupt code bits. - */ -#define ADAPTER_INT_PTRS 0x0A00 /* Address offset of adapter internal - * pointers 01:0a00 (high-low) have to - * be read after init and before open. - */ - - -/* Interrupt Codes (only MAC IRQs) */ -#define STS_IRQ_ADAPTER_CHECK 0x0000 /* unrecoverable hardware or - * software error. - */ -#define STS_IRQ_RING_STATUS 0x0004 /* SSB is updated with ring status. */ -#define STS_IRQ_LLC_STATUS 0x0005 /* Not used in MAC-only microcode */ -#define STS_IRQ_SCB_CLEAR 0x0006 /* SCB clear, following an - * SCB_REQUEST IRQ. - */ -#define STS_IRQ_TIMER 0x0007 /* Not normally used in MAC ucode */ -#define STS_IRQ_COMMAND_STATUS 0x0008 /* SSB is updated with command - * status. - */ -#define STS_IRQ_RECEIVE_STATUS 0x000A /* SSB is updated with receive - * status. - */ -#define STS_IRQ_TRANSMIT_STATUS 0x000C /* SSB is updated with transmit - * status - */ -#define STS_IRQ_RECEIVE_PENDING 0x000E /* Not used in MAC-only microcode */ -#define STS_IRQ_MASK 0x000F /* = STS_ERROR_MASK. */ - - -/* TRANSMIT_STATUS completion code: (SSB.Parm[0]) */ -#define COMMAND_COMPLETE 0x0080 /* TRANSMIT command completed - * (avoid this!) issue another transmit - * to send additional frames. - */ -#define FRAME_COMPLETE 0x0040 /* Frame has been transmitted; - * INTERRUPT_FRAME bit was set in the - * CSTAT request; indication of possibly - * more than one frame transmissions! - * SSB.Parm[0-1]: 32 bit pointer to - * TPL of last frame. - */ -#define LIST_ERROR 0x0020 /* Error in one of the TPLs that - * compose the frame; TRANSMIT - * terminated; Parm[1-2]: 32bit pointer - * to TPL which starts the error - * frame; error details in bits 8-13. - * (14?) - */ -#define FRAME_SIZE_ERROR 0x8000 /* FRAME_SIZE does not equal the sum of - * the valid DATA_COUNT fields; - * FRAME_SIZE less than header plus - * information field. (15 bytes + - * routing field) Or if FRAME_SIZE - * was specified as zero in one list. - */ -#define TX_THRESHOLD 0x4000 /* FRAME_SIZE greater than (BUFFER_SIZE - * - 9) * TX_BUF_MAX. - */ -#define ODD_ADDRESS 0x2000 /* Odd forward pointer value is - * read on a list without END_FRAME - * indication. - */ -#define FRAME_ERROR 0x1000 /* START_FRAME bit (not) anticipated, - * but (not) set. - */ -#define ACCESS_PRIORITY_ERROR 0x0800 /* Access priority requested has not - * been allowed. - */ -#define UNENABLED_MAC_FRAME 0x0400 /* MAC frame has source class of zero - * or MAC frame PCF ATTN field is - * greater than one. - */ -#define ILLEGAL_FRAME_FORMAT 0x0200 /* Bit 0 or FC field was set to one. */ - - -/* - * Since we need to support some functions even if the adapter is in a - * CLOSED state, we have a (pseudo-) command queue which holds commands - * that are outstandig to be executed. - * - * Each time a command completes, an interrupt occurs and the next - * command is executed. The command queue is actually a simple word with - * a bit for each outstandig command. Therefore the commands will not be - * executed in the order they have been queued. - * - * The following defines the command code bits and the command queue: - */ -#define OC_OPEN 0x0001 /* OPEN command */ -#define OC_TRANSMIT 0x0002 /* TRANSMIT command */ -#define OC_TRANSMIT_HALT 0x0004 /* TRANSMIT_HALT command */ -#define OC_RECEIVE 0x0008 /* RECEIVE command */ -#define OC_CLOSE 0x0010 /* CLOSE command */ -#define OC_SET_GROUP_ADDR 0x0020 /* SET_GROUP_ADDR command */ -#define OC_SET_FUNCT_ADDR 0x0040 /* SET_FUNCT_ADDR command */ -#define OC_READ_ERROR_LOG 0x0080 /* READ_ERROR_LOG command */ -#define OC_READ_ADAPTER 0x0100 /* READ_ADAPTER command */ -#define OC_MODIFY_OPEN_PARMS 0x0400 /* MODIFY_OPEN_PARMS command */ -#define OC_RESTORE_OPEN_PARMS 0x0800 /* RESTORE_OPEN_PARMS command */ -#define OC_SET_FIRST_16_GROUP 0x1000 /* SET_FIRST_16_GROUP command */ -#define OC_SET_BRIDGE_PARMS 0x2000 /* SET_BRIDGE_PARMS command */ -#define OC_CONFIG_BRIDGE_PARMS 0x4000 /* CONFIG_BRIDGE_PARMS command */ - -#define OPEN 0x0300 /* C: open command. S: completion. */ -#define TRANSMIT 0x0400 /* C: transmit command. S: completion - * status. (reject: COMMAND_REJECT if - * adapter not opened, TRANSMIT already - * issued or address passed in the SCB - * not word aligned) - */ -#define TRANSMIT_HALT 0x0500 /* C: interrupt TX TPL chain; if no - * TRANSMIT command issued, the command - * is ignored (completion with TRANSMIT - * status (0x0400)!) - */ -#define RECEIVE 0x0600 /* C: receive command. S: completion - * status. (reject: COMMAND_REJECT if - * adapter not opened, RECEIVE already - * issued or address passed in the SCB - * not word aligned) - */ -#define CLOSE 0x0700 /* C: close adapter. S: completion. - * (COMMAND_REJECT if adapter not open) - */ -#define SET_GROUP_ADDR 0x0800 /* C: alter adapter group address after - * OPEN. S: completion. (COMMAND_REJECT - * if adapter not open) - */ -#define SET_FUNCT_ADDR 0x0900 /* C: alter adapter functional address - * after OPEN. S: completion. - * (COMMAND_REJECT if adapter not open) - */ -#define READ_ERROR_LOG 0x0A00 /* C: read adapter error counters. - * S: completion. (command ignored - * if adapter not open!) - */ -#define READ_ADAPTER 0x0B00 /* C: read data from adapter memory. - * (important: after init and before - * open!) S: completion. (ADAPTER_CHECK - * interrupt if undefined storage area - * read) - */ -#define MODIFY_OPEN_PARMS 0x0D00 /* C: modify some adapter operational - * parameters. (bit correspondend to - * WRAP_INTERFACE is ignored) - * S: completion. (reject: - * COMMAND_REJECT) - */ -#define RESTORE_OPEN_PARMS 0x0E00 /* C: modify some adapter operational - * parameters. (bit correspondend - * to WRAP_INTERFACE is ignored) - * S: completion. (reject: - * COMMAND_REJECT) - */ -#define SET_FIRST_16_GROUP 0x0F00 /* C: alter the first two bytes in - * adapter group address. - * S: completion. (reject: - * COMMAND_REJECT) - */ -#define SET_BRIDGE_PARMS 0x1000 /* C: values and conditions for the - * adapter hardware to use when frames - * are copied for forwarding. - * S: completion. (reject: - * COMMAND_REJECT) - */ -#define CONFIG_BRIDGE_PARMS 0x1100 /* C: .. - * S: completion. (reject: - * COMMAND_REJECT) - */ - -#define SPEED_4 4 -#define SPEED_16 16 /* Default transmission speed */ - - -/* Initialization Parameter Block (IPB); word alignment necessary! */ -#define BURST_SIZE 0x0018 /* Default burst size */ -#define BURST_MODE 0x9F00 /* Burst mode enable */ -#define DMA_RETRIES 0x0505 /* Magic DMA retry number... */ - -#define CYCLE_TIME 3 /* Default AT-bus cycle time: 500 ns - * (later adapter version: fix cycle time!) - */ -#define LINE_SPEED_BIT 0x80 - -/* Macro definition for the wait function. */ -#define ONE_SECOND_TICKS 1000000 -#define HALF_SECOND (ONE_SECOND_TICKS / 2) -#define ONE_SECOND (ONE_SECOND_TICKS) -#define TWO_SECONDS (ONE_SECOND_TICKS * 2) -#define THREE_SECONDS (ONE_SECOND_TICKS * 3) -#define FOUR_SECONDS (ONE_SECOND_TICKS * 4) -#define FIVE_SECONDS (ONE_SECOND_TICKS * 5) - -#define BUFFER_SIZE 2048 /* Buffers on Adapter */ - -#pragma pack(1) -typedef struct { - unsigned short Init_Options; /* Initialize with burst mode; - * LLC disabled. (MAC only) - */ - - /* Interrupt vectors the adapter places on attached system bus. */ - u_int8_t CMD_Status_IV; /* Interrupt vector: command status. */ - u_int8_t TX_IV; /* Interrupt vector: transmit. */ - u_int8_t RX_IV; /* Interrupt vector: receive. */ - u_int8_t Ring_Status_IV; /* Interrupt vector: ring status. */ - u_int8_t SCB_Clear_IV; /* Interrupt vector: SCB clear. */ - u_int8_t Adapter_CHK_IV; /* Interrupt vector: adapter check. */ - - u_int16_t RX_Burst_Size; /* Max. number of transfer cycles. */ - u_int16_t TX_Burst_Size; /* During DMA burst; even value! */ - u_int16_t DMA_Abort_Thrhld; /* Number of DMA retries. */ - - u_int32_t SCB_Addr; /* SCB address: even, word aligned, high-low */ - u_int32_t SSB_Addr; /* SSB address: even, word aligned, high-low */ -} IPB, *IPB_Ptr; -#pragma pack() - -/* - * OPEN Command Parameter List (OCPL) (can be reused, if the adapter has to - * be reopened) - */ -#define BUFFER_SIZE 2048 /* Buffers on Adapter. */ -#define TPL_SIZE 8+6*TX_FRAG_NUM /* Depending on fragments per TPL. */ -#define RPL_SIZE 14 /* (with TI firmware v2.26 handling - * up to nine fragments possible) - */ -#define TX_BUF_MIN 20 /* ??? (Stephan: calculation with */ -#define TX_BUF_MAX 40 /* BUFFER_SIZE and MAX_FRAME_SIZE) ??? - */ -#define DISABLE_EARLY_TOKEN_RELEASE 0x1000 - -/* OPEN Options (high-low) */ -#define WRAP_INTERFACE 0x0080 /* Inserting omitted for test - * purposes; transmit data appears - * as receive data. (useful for - * testing; change: CLOSE necessary) - */ -#define DISABLE_HARD_ERROR 0x0040 /* On HARD_ERROR & TRANSMIT_BEACON - * no RING.STATUS interrupt. - */ -#define DISABLE_SOFT_ERROR 0x0020 /* On SOFT_ERROR, no RING.STATUS - * interrupt. - */ -#define PASS_ADAPTER_MAC_FRAMES 0x0010 /* Passing unsupported MAC frames - * to system. - */ -#define PASS_ATTENTION_FRAMES 0x0008 /* All changed attention MAC frames are - * passed to the system. - */ -#define PAD_ROUTING_FIELD 0x0004 /* Routing field is padded to 18 - * bytes. - */ -#define FRAME_HOLD 0x0002 /*Adapter waits for entire frame before - * initiating DMA transfer; otherwise: - * DMA transfer initiation if internal - * buffer filled. - */ -#define CONTENDER 0x0001 /* Adapter participates in the monitor - * contention process. - */ -#define PASS_BEACON_MAC_FRAMES 0x8000 /* Adapter passes beacon MAC frames - * to the system. - */ -#define EARLY_TOKEN_RELEASE 0x1000 /* Only valid in 16 Mbps operation; - * 0 = ETR. (no effect in 4 Mbps - * operation) - */ -#define COPY_ALL_MAC_FRAMES 0x0400 /* All MAC frames are copied to - * the system. (after OPEN: duplicate - * address test (DAT) MAC frame is - * first received frame copied to the - * system) - */ -#define COPY_ALL_NON_MAC_FRAMES 0x0200 /* All non MAC frames are copied to - * the system. - */ -#define PASS_FIRST_BUF_ONLY 0x0100 /* Passes only first internal buffer - * of each received frame; FrameSize - * of RPLs must contain internal - * BUFFER_SIZE bits for promiscuous mode. - */ -#define ENABLE_FULL_DUPLEX_SELECTION 0x2000 - /* Enable the use of full-duplex - * settings with bits in byte 22 in - * ocpl. (new feature in firmware - * version 3.09) - */ - -/* Full-duplex settings */ -#define OPEN_FULL_DUPLEX_OFF 0x0000 -#define OPEN_FULL_DUPLEX_ON 0x00c0 -#define OPEN_FULL_DUPLEX_AUTO 0x0080 - -#define PROD_ID_SIZE 18 /* Length of product ID. */ - -#define TX_FRAG_NUM 3 /* Number of fragments used in one TPL. */ -#define TX_MORE_FRAGMENTS 0x8000 /* Bit set in DataCount to indicate more - * fragments following. - */ - -/* XXX is there some better way to do this? */ -#define ISA_MAX_ADDRESS 0x00ffffff -#define PCI_MAX_ADDRESS 0xffffffff - -#pragma pack(1) -typedef struct { - u_int16_t OPENOptions; - u_int8_t NodeAddr[6]; /* Adapter node address; use ROM - * address - */ - u_int32_t GroupAddr; /* Multicast: high order - * bytes = 0xC000 - */ - u_int32_t FunctAddr; /* High order bytes = 0xC000 */ - __be16 RxListSize; /* RPL size: 0 (=26), 14, 20 or - * 26 bytes read by the adapter. - * (Depending on the number of - * fragments/list) - */ - __be16 TxListSize; /* TPL size */ - __be16 BufSize; /* Is automatically rounded up to the - * nearest nK boundary. - */ - u_int16_t FullDuplex; - u_int16_t Reserved; - u_int8_t TXBufMin; /* Number of adapter buffers reserved - * for transmission a minimum of 2 - * buffers must be allocated. - */ - u_int8_t TXBufMax; /* Maximum number of adapter buffers - * for transmit; a minimum of 2 buffers - * must be available for receive. - * Default: 6 - */ - u_int16_t ProdIDAddr[2];/* Pointer to product ID. */ -} OPB, *OPB_Ptr; -#pragma pack() - -/* - * SCB: adapter commands enabled by the host system started by writing - * CMD_INTERRUPT_ADAPTER | CMD_EXECUTE (|SCB_REQUEST) to the SIFCMD IO - * register. (special case: | CMD_SYSTEM_IRQ for initialization) - */ -#pragma pack(1) -typedef struct { - u_int16_t CMD; /* Command code */ - u_int16_t Parm[2]; /* Pointer to Command Parameter Block */ -} SCB; /* System Command Block (32 bit physical address; big endian)*/ -#pragma pack() - -/* - * SSB: adapter command return status can be evaluated after COMMAND_STATUS - * adapter to system interrupt after reading SSB, the availability of the SSB - * has to be told the adapter by writing CMD_INTERRUPT_ADAPTER | CMD_SSB_CLEAR - * in the SIFCMD IO register. - */ -#pragma pack(1) -typedef struct { - u_int16_t STS; /* Status code */ - u_int16_t Parm[3]; /* Parameter or pointer to Status Parameter - * Block. - */ -} SSB; /* System Status Block (big endian - physical address) */ -#pragma pack() - -typedef struct { - unsigned short BurnedInAddrPtr; /* Pointer to adapter burned in - * address. (BIA) - */ - unsigned short SoftwareLevelPtr;/* Pointer to software level data. */ - unsigned short AdapterAddrPtr; /* Pointer to adapter addresses. */ - unsigned short AdapterParmsPtr; /* Pointer to adapter parameters. */ - unsigned short MACBufferPtr; /* Pointer to MAC buffer. (internal) */ - unsigned short LLCCountersPtr; /* Pointer to LLC counters. */ - unsigned short SpeedFlagPtr; /* Pointer to data rate flag. - * (4/16 Mbps) - */ - unsigned short AdapterRAMPtr; /* Pointer to adapter RAM found. (KB) */ -} INTPTRS; /* Adapter internal pointers */ - -#pragma pack(1) -typedef struct { - u_int8_t Line_Error; /* Line error: code violation in - * frame or in a token, or FCS error. - */ - u_int8_t Internal_Error; /* IBM specific. (Reserved_1) */ - u_int8_t Burst_Error; - u_int8_t ARI_FCI_Error; /* ARI/FCI bit zero in AMP or - * SMP MAC frame. - */ - u_int8_t AbortDelimeters; /* IBM specific. (Reserved_2) */ - u_int8_t Reserved_3; - u_int8_t Lost_Frame_Error; /* Receive of end of transmitted - * frame failed. - */ - u_int8_t Rx_Congest_Error; /* Adapter in repeat mode has not - * enough buffer space to copy incoming - * frame. - */ - u_int8_t Frame_Copied_Error; /* ARI bit not zero in frame - * addressed to adapter. - */ - u_int8_t Frequency_Error; /* IBM specific. (Reserved_4) */ - u_int8_t Token_Error; /* (active only in monitor station) */ - u_int8_t Reserved_5; - u_int8_t DMA_Bus_Error; /* DMA bus errors not exceeding the - * abort thresholds. - */ - u_int8_t DMA_Parity_Error; /* DMA parity errors not exceeding - * the abort thresholds. - */ -} ERRORTAB; /* Adapter error counters */ -#pragma pack() - - -/*--------------------- Send and Receive definitions -------------------*/ -#pragma pack(1) -typedef struct { - __be16 DataCount; /* Value 0, even and odd values are - * permitted; value is unaltered most - * significant bit set: following - * fragments last fragment: most - * significant bit is not evaluated. - * (???) - */ - __be32 DataAddr; /* Pointer to frame data fragment; - * even or odd. - */ -} Fragment; -#pragma pack() - -#define MAX_FRAG_NUMBERS 9 /* Maximal number of fragments possible to use - * in one RPL/TPL. (depending on TI firmware - * version) - */ - -/* - * AC (1), FC (1), Dst (6), Src (6), RIF (18), Data (4472) = 4504 - * The packet size can be one of the follows: 548, 1502, 2084, 4504, 8176, - * 11439, 17832. Refer to TMS380 Second Generation Token Ring User's Guide - * Page 2-27. - */ -#define HEADER_SIZE (1 + 1 + 6 + 6) -#define SRC_SIZE 18 -#define MIN_DATA_SIZE 516 -#define DEFAULT_DATA_SIZE 4472 -#define MAX_DATA_SIZE 17800 - -#define DEFAULT_PACKET_SIZE (HEADER_SIZE + SRC_SIZE + DEFAULT_DATA_SIZE) -#define MIN_PACKET_SIZE (HEADER_SIZE + SRC_SIZE + MIN_DATA_SIZE) -#define MAX_PACKET_SIZE (HEADER_SIZE + SRC_SIZE + MAX_DATA_SIZE) - -/* - * Macros to deal with the frame status field. - */ -#define AC_NOT_RECOGNIZED 0x00 -#define GROUP_BIT 0x80 -#define GET_TRANSMIT_STATUS_HIGH_BYTE(Ts) ((unsigned char)((Ts) >> 8)) -#define GET_FRAME_STATUS_HIGH_AC(Fs) ((unsigned char)(((Fs) & 0xC0) >> 6)) -#define GET_FRAME_STATUS_LOW_AC(Fs) ((unsigned char)(((Fs) & 0x0C) >> 2)) -#define DIRECTED_FRAME(Context) (!((Context)->MData[2] & GROUP_BIT)) - - -/*--------------------- Send Functions ---------------------------------*/ -/* define TX_CSTAT _REQUEST (R) and _COMPLETE (C) values (high-low) */ - -#define TX_VALID 0x0080 /* R: set via TRANSMIT.VALID interrupt. - * C: always reset to zero! - */ -#define TX_FRAME_COMPLETE 0x0040 /* R: must be reset to zero. - * C: set to one. - */ -#define TX_START_FRAME 0x0020 /* R: start of a frame: 1 - * C: unchanged. - */ -#define TX_END_FRAME 0x0010 /* R: end of a frame: 1 - * C: unchanged. - */ -#define TX_FRAME_IRQ 0x0008 /* R: request interrupt generation - * after transmission. - * C: unchanged. - */ -#define TX_ERROR 0x0004 /* R: reserved. - * C: set to one if Error occurred. - */ -#define TX_INTERFRAME_WAIT 0x0004 -#define TX_PASS_CRC 0x0002 /* R: set if CRC value is already - * calculated. (valid only in - * FRAME_START TPL) - * C: unchanged. - */ -#define TX_PASS_SRC_ADDR 0x0001 /* R: adapter uses explicit frame - * source address and does not overwrite - * with the adapter node address. - * (valid only in FRAME_START TPL) - * - * C: unchanged. - */ -#define TX_STRIP_FS 0xFF00 /* R: reserved. - * C: if no Transmission Error, - * field contains copy of FS byte after - * stripping of frame. - */ - -/* - * Structure of Transmit Parameter Lists (TPLs) (only one frame every TPL, - * but possibly multiple TPLs for one frame) the length of the TPLs has to be - * initialized in the OPL. (OPEN parameter list) - */ -#define TPL_NUM 3 /* Number of Transmit Parameter Lists. - * !! MUST BE >= 3 !! - */ - -#pragma pack(1) -typedef struct s_TPL TPL; - -struct s_TPL { /* Transmit Parameter List (align on even word boundaries) */ - __be32 NextTPLAddr; /* Pointer to next TPL in chain; if - * pointer is odd: this is the last - * TPL. Pointing to itself can cause - * problems! - */ - volatile u_int16_t Status; /* Initialized by the adapter: - * CSTAT_REQUEST important: update least - * significant bit first! Set by the - * adapter: CSTAT_COMPLETE status. - */ - __be16 FrameSize; /* Number of bytes to be transmitted - * as a frame including AC/FC, - * Destination, Source, Routing field - * not including CRC, FS, End Delimiter - * (valid only if START_FRAME bit in - * CSTAT nonzero) must not be zero in - * any list; maximum value: (BUFFER_SIZE - * - 8) * TX_BUF_MAX sum of DataCount - * values in FragmentList must equal - * Frame_Size value in START_FRAME TPL! - * frame data fragment list. - */ - - /* TPL/RPL size in OPEN parameter list depending on maximal - * numbers of fragments used in one parameter list. - */ - Fragment FragList[TX_FRAG_NUM]; /* Maximum: nine frame fragments in one - * TPL actual version of firmware: 9 - * fragments possible. - */ -#pragma pack() - - /* Special proprietary data and precalculations */ - - TPL *NextTPLPtr; /* Pointer to next TPL in chain. */ - unsigned char *MData; - struct sk_buff *Skb; - unsigned char TPLIndex; - volatile unsigned char BusyFlag;/* Flag: TPL busy? */ - dma_addr_t DMABuff; /* DMA IO bus address from dma_map */ -}; - -/* ---------------------Receive Functions-------------------------------* - * define RECEIVE_CSTAT_REQUEST (R) and RECEIVE_CSTAT_COMPLETE (C) values. - * (high-low) - */ -#define RX_VALID 0x0080 /* R: set; tell adapter with - * RECEIVE.VALID interrupt. - * C: reset to zero. - */ -#define RX_FRAME_COMPLETE 0x0040 /* R: must be reset to zero, - * C: set to one. - */ -#define RX_START_FRAME 0x0020 /* R: must be reset to zero. - * C: set to one on the list. - */ -#define RX_END_FRAME 0x0010 /* R: must be reset to zero. - * C: set to one on the list - * that ends the frame. - */ -#define RX_FRAME_IRQ 0x0008 /* R: request interrupt generation - * after receive. - * C: unchanged. - */ -#define RX_INTERFRAME_WAIT 0x0004 /* R: after receiving a frame: - * interrupt and wait for a - * RECEIVE.CONTINUE. - * C: unchanged. - */ -#define RX_PASS_CRC 0x0002 /* R: if set, the adapter includes - * the CRC in data passed. (last four - * bytes; valid only if FRAME_START is - * set) - * C: set, if CRC is included in - * received data. - */ -#define RX_PASS_SRC_ADDR 0x0001 /* R: adapter uses explicit frame - * source address and does not - * overwrite with the adapter node - * address. (valid only if FRAME_START - * is set) - * C: unchanged. - */ -#define RX_RECEIVE_FS 0xFC00 /* R: reserved; must be reset to zero. - * C: on lists with START_FRAME, field - * contains frame status field from - * received frame; otherwise cleared. - */ -#define RX_ADDR_MATCH 0x0300 /* R: reserved; must be reset to zero. - * C: address match code mask. - */ -#define RX_STATUS_MASK 0x00FF /* Mask for receive status bits. */ - -#define RX_INTERN_ADDR_MATCH 0x0100 /* C: internally address match. */ -#define RX_EXTERN_ADDR_MATCH 0x0200 /* C: externally matched via - * XMATCH/XFAIL interface. - */ -#define RX_INTEXT_ADDR_MATCH 0x0300 /* C: internally and externally - * matched. - */ -#define RX_READY (RX_VALID | RX_FRAME_IRQ) /* Ready for receive. */ - -/* Constants for Command Status Interrupt. - * COMMAND_REJECT status field bit functions (SSB.Parm[0]) - */ -#define ILLEGAL_COMMAND 0x0080 /* Set if an unknown command - * is issued to the adapter - */ -#define ADDRESS_ERROR 0x0040 /* Set if any address field in - * the SCB is odd. (not word aligned) - */ -#define ADAPTER_OPEN 0x0020 /* Command issued illegal with - * open adapter. - */ -#define ADAPTER_CLOSE 0x0010 /* Command issued illegal with - * closed adapter. - */ -#define SAME_COMMAND 0x0008 /* Command issued with same command - * already executing. - */ - -/* OPEN_COMPLETION values (SSB.Parm[0], MSB) */ -#define NODE_ADDR_ERROR 0x0040 /* Wrong address or BIA read - * zero address. - */ -#define LIST_SIZE_ERROR 0x0020 /* If List_Size value not in 0, - * 14, 20, 26. - */ -#define BUF_SIZE_ERROR 0x0010 /* Not enough available memory for - * two buffers. - */ -#define TX_BUF_COUNT_ERROR 0x0004 /* Remaining receive buffers less than - * two. - */ -#define OPEN_ERROR 0x0002 /* Error during ring insertion; more - * information in bits 8-15. - */ - -/* Standard return codes */ -#define GOOD_COMPLETION 0x0080 /* =OPEN_SUCCESSFULL */ -#define INVALID_OPEN_OPTION 0x0001 /* OPEN options are not supported by - * the adapter. - */ - -/* OPEN phases; details of OPEN_ERROR (SSB.Parm[0], LSB) */ -#define OPEN_PHASES_MASK 0xF000 /* Check only the bits 8-11. */ -#define LOBE_MEDIA_TEST 0x1000 -#define PHYSICAL_INSERTION 0x2000 -#define ADDRESS_VERIFICATION 0x3000 -#define PARTICIPATION_IN_RING_POLL 0x4000 -#define REQUEST_INITIALISATION 0x5000 -#define FULLDUPLEX_CHECK 0x6000 - -/* OPEN error codes; details of OPEN_ERROR (SSB.Parm[0], LSB) */ -#define OPEN_ERROR_CODES_MASK 0x0F00 /* Check only the bits 12-15. */ -#define OPEN_FUNCTION_FAILURE 0x0100 /* Unable to transmit to itself or - * frames received before insertion. - */ -#define OPEN_SIGNAL_LOSS 0x0200 /* Signal loss condition detected at - * receiver. - */ -#define OPEN_TIMEOUT 0x0500 /* Insertion timer expired before - * logical insertion. - */ -#define OPEN_RING_FAILURE 0x0600 /* Unable to receive own ring purge - * MAC frames. - */ -#define OPEN_RING_BEACONING 0x0700 /* Beacon MAC frame received after - * ring insertion. - */ -#define OPEN_DUPLICATE_NODEADDR 0x0800 /* Other station in ring found - * with the same address. - */ -#define OPEN_REQUEST_INIT 0x0900 /* RPS present but does not respond. */ -#define OPEN_REMOVE_RECEIVED 0x0A00 /* Adapter received a remove adapter - * MAC frame. - */ -#define OPEN_FULLDUPLEX_SET 0x0D00 /* Got this with full duplex on when - * trying to connect to a normal ring. - */ - -/* SET_BRIDGE_PARMS return codes: */ -#define BRIDGE_INVALID_MAX_LEN 0x4000 /* MAX_ROUTING_FIELD_LENGTH odd, - * less than 6 or > 30. - */ -#define BRIDGE_INVALID_SRC_RING 0x2000 /* SOURCE_RING number zero, too large - * or = TARGET_RING. - */ -#define BRIDGE_INVALID_TRG_RING 0x1000 /* TARGET_RING number zero, too large - * or = SOURCE_RING. - */ -#define BRIDGE_INVALID_BRDGE_NO 0x0800 /* BRIDGE_NUMBER too large. */ -#define BRIDGE_INVALID_OPTIONS 0x0400 /* Invalid bridge options. */ -#define BRIDGE_DIAGS_FAILED 0x0200 /* Diagnostics of TMS380SRA failed. */ -#define BRIDGE_NO_SRA 0x0100 /* The TMS380SRA does not exist in HW - * configuration. - */ - -/* - * Bring Up Diagnostics error codes. - */ -#define BUD_INITIAL_ERROR 0x0 -#define BUD_CHECKSUM_ERROR 0x1 -#define BUD_ADAPTER_RAM_ERROR 0x2 -#define BUD_INSTRUCTION_ERROR 0x3 -#define BUD_CONTEXT_ERROR 0x4 -#define BUD_PROTOCOL_ERROR 0x5 -#define BUD_INTERFACE_ERROR 0x6 - -/* BUD constants */ -#define BUD_MAX_RETRIES 3 -#define BUD_MAX_LOOPCNT 6 -#define BUD_TIMEOUT 3000 - -/* Initialization constants */ -#define INIT_MAX_RETRIES 3 /* Maximum three retries. */ -#define INIT_MAX_LOOPCNT 22 /* Maximum loop counts. */ - -/* RING STATUS field values (high/low) */ -#define SIGNAL_LOSS 0x0080 /* Loss of signal on the ring - * detected. - */ -#define HARD_ERROR 0x0040 /* Transmitting or receiving beacon - * frames. - */ -#define SOFT_ERROR 0x0020 /* Report error MAC frame - * transmitted. - */ -#define TRANSMIT_BEACON 0x0010 /* Transmitting beacon frames on the - * ring. - */ -#define LOBE_WIRE_FAULT 0x0008 /* Open or short circuit in the - * cable to concentrator; adapter - * closed. - */ -#define AUTO_REMOVAL_ERROR 0x0004 /* Lobe wrap test failed, deinserted; - * adapter closed. - */ -#define REMOVE_RECEIVED 0x0001 /* Received a remove ring station MAC - * MAC frame request; adapter closed. - */ -#define COUNTER_OVERFLOW 0x8000 /* Overflow of one of the adapters - * error counters; READ.ERROR.LOG. - */ -#define SINGLE_STATION 0x4000 /* Adapter is the only station on the - * ring. - */ -#define RING_RECOVERY 0x2000 /* Claim token MAC frames on the ring; - * reset after ring purge frame. - */ - -#define ADAPTER_CLOSED (LOBE_WIRE_FAULT | AUTO_REMOVAL_ERROR |\ - REMOVE_RECEIVED) - -/* Adapter_check_block.Status field bit assignments: */ -#define DIO_PARITY 0x8000 /* Adapter detects bad parity - * through direct I/O access. - */ -#define DMA_READ_ABORT 0x4000 /* Aborting DMA read operation - * from system Parm[0]: 0=timeout, - * 1=parity error, 2=bus error; - * Parm[1]: 32 bit pointer to host - * system address at failure. - */ -#define DMA_WRITE_ABORT 0x2000 /* Aborting DMA write operation - * to system. (parameters analogous to - * DMA_READ_ABORT) - */ -#define ILLEGAL_OP_CODE 0x1000 /* Illegal operation code in the - * the adapters firmware Parm[0]-2: - * communications processor registers - * R13-R15. - */ -#define PARITY_ERRORS 0x0800 /* Adapter detects internal bus - * parity error. - */ -#define RAM_DATA_ERROR 0x0080 /* Valid only during RAM testing; - * RAM data error Parm[0-1]: 32 bit - * pointer to RAM location. - */ -#define RAM_PARITY_ERROR 0x0040 /* Valid only during RAM testing; - * RAM parity error Parm[0-1]: 32 bit - * pointer to RAM location. - */ -#define RING_UNDERRUN 0x0020 /* Internal DMA underrun when - * transmitting onto ring. - */ -#define INVALID_IRQ 0x0008 /* Unrecognized interrupt generated - * internal to adapter Parm[0-2]: - * adapter register R13-R15. - */ -#define INVALID_ERROR_IRQ 0x0004 /* Unrecognized error interrupt - * generated Parm[0-2]: adapter register - * R13-R15. - */ -#define INVALID_XOP 0x0002 /* Unrecognized XOP request in - * communication processor Parm[0-2]: - * adapter register R13-R15. - */ -#define CHECKADDR 0x05E0 /* Adapter check status information - * address offset. - */ -#define ROM_PAGE_0 0x0000 /* Adapter ROM page 0. */ - -/* - * RECEIVE.STATUS interrupt result SSB values: (high-low) - * (RECEIVE_COMPLETE field bit definitions in SSB.Parm[0]) - */ -#define RX_COMPLETE 0x0080 /* SSB.Parm[0]; SSB.Parm[1]: 32 - * bit pointer to last RPL. - */ -#define RX_SUSPENDED 0x0040 /* SSB.Parm[0]; SSB.Parm[1]: 32 - * bit pointer to RPL with odd - * forward pointer. - */ - -/* Valid receive CSTAT: */ -#define RX_FRAME_CONTROL_BITS (RX_VALID | RX_START_FRAME | RX_END_FRAME | \ - RX_FRAME_COMPLETE) -#define VALID_SINGLE_BUFFER_FRAME (RX_START_FRAME | RX_END_FRAME | \ - RX_FRAME_COMPLETE) - -typedef enum SKB_STAT SKB_STAT; -enum SKB_STAT { - SKB_UNAVAILABLE, - SKB_DMA_DIRECT, - SKB_DATA_COPY -}; - -/* Receive Parameter List (RPL) The length of the RPLs has to be initialized - * in the OPL. (OPEN parameter list) - */ -#define RPL_NUM 3 - -#define RX_FRAG_NUM 1 /* Maximal number of used fragments in one RPL. - * (up to firmware v2.24: 3, now: up to 9) - */ - -#pragma pack(1) -typedef struct s_RPL RPL; -struct s_RPL { /* Receive Parameter List */ - __be32 NextRPLAddr; /* Pointer to next RPL in chain - * (normalized = physical 32 bit - * address) if pointer is odd: this - * is last RPL. Pointing to itself can - * cause problems! - */ - volatile u_int16_t Status; /* Set by creation of Receive Parameter - * List RECEIVE_CSTAT_COMPLETE set by - * adapter in lists that start or end - * a frame. - */ - volatile __be16 FrameSize; /* Number of bytes received as a - * frame including AC/FC, Destination, - * Source, Routing field not including - * CRC, FS (Frame Status), End Delimiter - * (valid only if START_FRAME bit in - * CSTAT nonzero) must not be zero in - * any list; maximum value: (BUFFER_SIZE - * - 8) * TX_BUF_MAX sum of DataCount - * values in FragmentList must equal - * Frame_Size value in START_FRAME TPL! - * frame data fragment list - */ - - /* TPL/RPL size in OPEN parameter list depending on maximal numbers - * of fragments used in one parameter list. - */ - Fragment FragList[RX_FRAG_NUM]; /* Maximum: nine frame fragments in - * one TPL. Actual version of firmware: - * 9 fragments possible. - */ -#pragma pack() - - /* Special proprietary data and precalculations. */ - RPL *NextRPLPtr; /* Logical pointer to next RPL in chain. */ - unsigned char *MData; - struct sk_buff *Skb; - SKB_STAT SkbStat; - int RPLIndex; - dma_addr_t DMABuff; /* DMA IO bus address from dma_map */ -}; - -/* Information that need to be kept for each board. */ -typedef struct net_local { -#pragma pack(1) - IPB ipb; /* Initialization Parameter Block. */ - SCB scb; /* System Command Block: system to adapter - * communication. - */ - SSB ssb; /* System Status Block: adapter to system - * communication. - */ - OPB ocpl; /* Open Options Parameter Block. */ - - ERRORTAB errorlogtable; /* Adapter statistic error counters. - * (read from adapter memory) - */ - unsigned char ProductID[PROD_ID_SIZE + 1]; /* Product ID */ -#pragma pack() - - TPL Tpl[TPL_NUM]; - TPL *TplFree; - TPL *TplBusy; - unsigned char LocalTxBuffers[TPL_NUM][DEFAULT_PACKET_SIZE]; - - RPL Rpl[RPL_NUM]; - RPL *RplHead; - RPL *RplTail; - unsigned char LocalRxBuffers[RPL_NUM][DEFAULT_PACKET_SIZE]; - - struct device *pdev; - int DataRate; - unsigned char ScbInUse; - unsigned short CMDqueue; - - unsigned long AdapterOpenFlag:1; - unsigned long AdapterVirtOpenFlag:1; - unsigned long OpenCommandIssued:1; - unsigned long TransmitCommandActive:1; - unsigned long TransmitHaltScheduled:1; - unsigned long HaltInProgress:1; - unsigned long LobeWireFaultLogged:1; - unsigned long ReOpenInProgress:1; - unsigned long Sleeping:1; - - unsigned long LastOpenStatus; - unsigned short CurrentRingStatus; - unsigned long MaxPacketSize; - - unsigned long StartTime; - unsigned long LastSendTime; - - struct tr_statistics MacStat; /* MAC statistics structure */ - - unsigned long dmalimit; /* the max DMA address (ie, ISA) */ - dma_addr_t dmabuffer; /* the DMA bus address corresponding to - priv. Might be different from virt_to_bus() - for architectures with IO MMU (Alpha) */ - - struct timer_list timer; - - wait_queue_head_t wait_for_tok_int; - - INTPTRS intptrs; /* Internal adapter pointer. Must be read - * before OPEN command. - */ - unsigned short (*setnselout)(struct net_device *); - unsigned short (*sifreadb)(struct net_device *, unsigned short); - void (*sifwriteb)(struct net_device *, unsigned short, unsigned short); - unsigned short (*sifreadw)(struct net_device *, unsigned short); - void (*sifwritew)(struct net_device *, unsigned short, unsigned short); - - spinlock_t lock; /* SMP protection */ - void *tmspriv; -} NET_LOCAL; - -#endif /* __KERNEL__ */ -#endif /* __LINUX_TMS380TR_H */ diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c deleted file mode 100644 index 90f3fa44a151..000000000000 --- a/drivers/net/tokenring/tmspci.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * tmspci.c: A generic network driver for TMS380-based PCI token ring cards. - * - * Written 1999 by Adam Fritzler - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * This driver module supports the following cards: - * - SysKonnect TR4/16(+) PCI (SK-4590) - * - SysKonnect TR4/16 PCI (SK-4591) - * - Compaq TR 4/16 PCI - * - Thomas-Conrad TC4048 4/16 PCI - * - 3Com 3C339 Token Link Velocity - * - * Maintainer(s): - * AF Adam Fritzler - * - * Modification History: - * 30-Dec-99 AF Split off from the tms380tr driver. - * 22-Jan-00 AF Updated to use indirect read/writes - * 23-Nov-00 JG New PCI API, cleanups - * - * TODO: - * 1. See if we can use MMIO instead of port accesses - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/trdevice.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#include "tms380tr.h" - -static char version[] __devinitdata = -"tmspci.c: v1.02 23/11/2000 by Adam Fritzler\n"; - -#define TMS_PCI_IO_EXTENT 32 - -struct card_info { - unsigned char nselout[2]; /* NSELOUT vals for 4mb([0]) and 16mb([1]) */ - char *name; -}; - -static struct card_info card_info_table[] = { - { {0x03, 0x01}, "Compaq 4/16 TR PCI"}, - { {0x03, 0x01}, "SK NET TR 4/16 PCI"}, - { {0x03, 0x01}, "Thomas-Conrad TC4048 PCI 4/16"}, - { {0x03, 0x01}, "3Com Token Link Velocity"}, -}; - -static DEFINE_PCI_DEVICE_TABLE(tmspci_pci_tbl) = { - { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_TOKENRING, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_TR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, - { PCI_VENDOR_ID_TCONRAD, PCI_DEVICE_ID_TCONRAD_TOKENRING, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, - { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C339, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, - { } /* Terminating entry */ -}; -MODULE_DEVICE_TABLE(pci, tmspci_pci_tbl); - -MODULE_LICENSE("GPL"); - -static void tms_pci_read_eeprom(struct net_device *dev); -static unsigned short tms_pci_setnselout_pins(struct net_device *dev); - -static unsigned short tms_pci_sifreadb(struct net_device *dev, unsigned short reg) -{ - return inb(dev->base_addr + reg); -} - -static unsigned short tms_pci_sifreadw(struct net_device *dev, unsigned short reg) -{ - return inw(dev->base_addr + reg); -} - -static void tms_pci_sifwriteb(struct net_device *dev, unsigned short val, unsigned short reg) -{ - outb(val, dev->base_addr + reg); -} - -static void tms_pci_sifwritew(struct net_device *dev, unsigned short val, unsigned short reg) -{ - outw(val, dev->base_addr + reg); -} - -static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - static int versionprinted; - struct net_device *dev; - struct net_local *tp; - int ret; - unsigned int pci_irq_line; - unsigned long pci_ioaddr; - struct card_info *cardinfo = &card_info_table[ent->driver_data]; - - if (versionprinted++ == 0) - printk("%s", version); - - if (pci_enable_device(pdev)) - return -EIO; - - /* Remove I/O space marker in bit 0. */ - pci_irq_line = pdev->irq; - pci_ioaddr = pci_resource_start (pdev, 0); - - /* At this point we have found a valid card. */ - dev = alloc_trdev(sizeof(struct net_local)); - if (!dev) - return -ENOMEM; - - if (!request_region(pci_ioaddr, TMS_PCI_IO_EXTENT, dev->name)) { - ret = -EBUSY; - goto err_out_trdev; - } - - dev->base_addr = pci_ioaddr; - dev->irq = pci_irq_line; - dev->dma = 0; - - dev_info(&pdev->dev, "%s\n", cardinfo->name); - dev_info(&pdev->dev, " IO: %#4lx IRQ: %d\n", dev->base_addr, dev->irq); - - tms_pci_read_eeprom(dev); - - dev_info(&pdev->dev, " Ring Station Address: %pM\n", dev->dev_addr); - - ret = tmsdev_init(dev, &pdev->dev); - if (ret) { - dev_info(&pdev->dev, "unable to get memory for dev->priv.\n"); - goto err_out_region; - } - - tp = netdev_priv(dev); - tp->setnselout = tms_pci_setnselout_pins; - - tp->sifreadb = tms_pci_sifreadb; - tp->sifreadw = tms_pci_sifreadw; - tp->sifwriteb = tms_pci_sifwriteb; - tp->sifwritew = tms_pci_sifwritew; - - memcpy(tp->ProductID, cardinfo->name, PROD_ID_SIZE + 1); - - tp->tmspriv = cardinfo; - - dev->netdev_ops = &tms380tr_netdev_ops; - - ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED, - dev->name, dev); - if (ret) - goto err_out_tmsdev; - - pci_set_drvdata(pdev, dev); - SET_NETDEV_DEV(dev, &pdev->dev); - - ret = register_netdev(dev); - if (ret) - goto err_out_irq; - - return 0; - -err_out_irq: - free_irq(pdev->irq, dev); -err_out_tmsdev: - pci_set_drvdata(pdev, NULL); - tmsdev_term(dev); -err_out_region: - release_region(pci_ioaddr, TMS_PCI_IO_EXTENT); -err_out_trdev: - free_netdev(dev); - return ret; -} - -/* - * Reads MAC address from adapter RAM, which should've read it from - * the onboard ROM. - * - * Calling this on a board that does not support it can be a very - * dangerous thing. The Madge board, for instance, will lock your - * machine hard when this is called. Luckily, its supported in a - * separate driver. --ASF - */ -static void tms_pci_read_eeprom(struct net_device *dev) -{ - int i; - - /* Address: 0000:0000 */ - tms_pci_sifwritew(dev, 0, SIFADX); - tms_pci_sifwritew(dev, 0, SIFADR); - - /* Read six byte MAC address data */ - dev->addr_len = 6; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = tms_pci_sifreadw(dev, SIFINC) >> 8; -} - -static unsigned short tms_pci_setnselout_pins(struct net_device *dev) -{ - unsigned short val = 0; - struct net_local *tp = netdev_priv(dev); - struct card_info *cardinfo = tp->tmspriv; - - if(tp->DataRate == SPEED_4) - val |= cardinfo->nselout[0]; /* Set 4Mbps */ - else - val |= cardinfo->nselout[1]; /* Set 16Mbps */ - return val; -} - -static void __devexit tms_pci_detach (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - - BUG_ON(!dev); - unregister_netdev(dev); - release_region(dev->base_addr, TMS_PCI_IO_EXTENT); - free_irq(dev->irq, dev); - tmsdev_term(dev); - free_netdev(dev); - pci_set_drvdata(pdev, NULL); -} - -static struct pci_driver tms_pci_driver = { - .name = "tmspci", - .id_table = tmspci_pci_tbl, - .probe = tms_pci_attach, - .remove = __devexit_p(tms_pci_detach), -}; - -module_pci_driver(tms_pci_driver); |