diff options
Diffstat (limited to 'drivers/net/wireless/libertas/host.h')
| -rw-r--r-- | drivers/net/wireless/libertas/host.h | 959 |
1 files changed, 808 insertions, 151 deletions
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h index fe8f0cb737bc..3809c0b49464 100644 --- a/drivers/net/wireless/libertas/host.h +++ b/drivers/net/wireless/libertas/host.h @@ -1,201 +1,190 @@ /** - * This file contains definitions of WLAN commands. + * This file function prototypes, data structure + * and definitions for all the host/station commands */ #ifndef _LBS_HOST_H_ #define _LBS_HOST_H_ -/** PUBLIC DEFINITIONS */ -#define DEFAULT_AD_HOC_CHANNEL 6 -#define DEFAULT_AD_HOC_CHANNEL_A 36 +#include "types.h" +#include "defs.h" -#define CMD_OPTION_WAITFORRSP 0x0002 +#define DEFAULT_AD_HOC_CHANNEL 6 + +#define CMD_OPTION_WAITFORRSP 0x0002 /** Host command IDs */ /* Return command are almost always the same as the host command, but with * bit 15 set high. There are a few exceptions, though... */ -#define CMD_RET(cmd) (0x8000 | cmd) +#define CMD_RET(cmd) (0x8000 | cmd) /* Return command convention exceptions: */ -#define CMD_RET_802_11_ASSOCIATE 0x8012 +#define CMD_RET_802_11_ASSOCIATE 0x8012 /* Command codes */ -#define CMD_GET_HW_SPEC 0x0003 -#define CMD_EEPROM_UPDATE 0x0004 -#define CMD_802_11_RESET 0x0005 -#define CMD_802_11_SCAN 0x0006 -#define CMD_802_11_GET_LOG 0x000b -#define CMD_MAC_MULTICAST_ADR 0x0010 -#define CMD_802_11_AUTHENTICATE 0x0011 -#define CMD_802_11_EEPROM_ACCESS 0x0059 -#define CMD_802_11_ASSOCIATE 0x0050 -#define CMD_802_11_SET_WEP 0x0013 -#define CMD_802_11_GET_STAT 0x0014 -#define CMD_802_3_GET_STAT 0x0015 -#define CMD_802_11_SNMP_MIB 0x0016 -#define CMD_MAC_REG_MAP 0x0017 -#define CMD_BBP_REG_MAP 0x0018 -#define CMD_MAC_REG_ACCESS 0x0019 -#define CMD_BBP_REG_ACCESS 0x001a -#define CMD_RF_REG_ACCESS 0x001b -#define CMD_802_11_RADIO_CONTROL 0x001c -#define CMD_802_11_RF_CHANNEL 0x001d -#define CMD_802_11_RF_TX_POWER 0x001e -#define CMD_802_11_RSSI 0x001f -#define CMD_802_11_RF_ANTENNA 0x0020 -#define CMD_802_11_PS_MODE 0x0021 -#define CMD_802_11_DATA_RATE 0x0022 -#define CMD_RF_REG_MAP 0x0023 -#define CMD_802_11_DEAUTHENTICATE 0x0024 -#define CMD_802_11_REASSOCIATE 0x0025 -#define CMD_MAC_CONTROL 0x0028 -#define CMD_802_11_AD_HOC_START 0x002b -#define CMD_802_11_AD_HOC_JOIN 0x002c -#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e -#define CMD_802_11_ENABLE_RSN 0x002f -#define CMD_802_11_SET_AFC 0x003c -#define CMD_802_11_GET_AFC 0x003d -#define CMD_802_11_AD_HOC_STOP 0x0040 -#define CMD_802_11_HOST_SLEEP_CFG 0x0043 -#define CMD_802_11_WAKEUP_CONFIRM 0x0044 -#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045 -#define CMD_802_11_BEACON_STOP 0x0049 -#define CMD_802_11_MAC_ADDRESS 0x004d -#define CMD_802_11_LED_GPIO_CTRL 0x004e -#define CMD_802_11_EEPROM_ACCESS 0x0059 -#define CMD_802_11_BAND_CONFIG 0x0058 -#define CMD_GSPI_BUS_CONFIG 0x005a -#define CMD_802_11D_DOMAIN_INFO 0x005b -#define CMD_802_11_KEY_MATERIAL 0x005e -#define CMD_802_11_SLEEP_PARAMS 0x0066 -#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067 -#define CMD_802_11_SLEEP_PERIOD 0x0068 -#define CMD_802_11_TPC_CFG 0x0072 -#define CMD_802_11_PA_CFG 0x0073 -#define CMD_802_11_FW_WAKE_METHOD 0x0074 -#define CMD_802_11_SUBSCRIBE_EVENT 0x0075 -#define CMD_802_11_RATE_ADAPT_RATESET 0x0076 -#define CMD_802_11_TX_RATE_QUERY 0x007f -#define CMD_GET_TSF 0x0080 -#define CMD_BT_ACCESS 0x0087 -#define CMD_FWT_ACCESS 0x0095 -#define CMD_802_11_MONITOR_MODE 0x0098 -#define CMD_MESH_ACCESS 0x009b -#define CMD_MESH_CONFIG_OLD 0x00a3 -#define CMD_MESH_CONFIG 0x00ac -#define CMD_SET_BOOT2_VER 0x00a5 -#define CMD_FUNC_INIT 0x00a9 -#define CMD_FUNC_SHUTDOWN 0x00aa -#define CMD_802_11_BEACON_CTRL 0x00b0 +#define CMD_GET_HW_SPEC 0x0003 +#define CMD_EEPROM_UPDATE 0x0004 +#define CMD_802_11_RESET 0x0005 +#define CMD_802_11_SCAN 0x0006 +#define CMD_802_11_GET_LOG 0x000b +#define CMD_MAC_MULTICAST_ADR 0x0010 +#define CMD_802_11_AUTHENTICATE 0x0011 +#define CMD_802_11_EEPROM_ACCESS 0x0059 +#define CMD_802_11_ASSOCIATE 0x0050 +#define CMD_802_11_SET_WEP 0x0013 +#define CMD_802_11_GET_STAT 0x0014 +#define CMD_802_3_GET_STAT 0x0015 +#define CMD_802_11_SNMP_MIB 0x0016 +#define CMD_MAC_REG_MAP 0x0017 +#define CMD_BBP_REG_MAP 0x0018 +#define CMD_MAC_REG_ACCESS 0x0019 +#define CMD_BBP_REG_ACCESS 0x001a +#define CMD_RF_REG_ACCESS 0x001b +#define CMD_802_11_RADIO_CONTROL 0x001c +#define CMD_802_11_RF_CHANNEL 0x001d +#define CMD_802_11_RF_TX_POWER 0x001e +#define CMD_802_11_RSSI 0x001f +#define CMD_802_11_RF_ANTENNA 0x0020 +#define CMD_802_11_PS_MODE 0x0021 +#define CMD_802_11_DATA_RATE 0x0022 +#define CMD_RF_REG_MAP 0x0023 +#define CMD_802_11_DEAUTHENTICATE 0x0024 +#define CMD_802_11_REASSOCIATE 0x0025 +#define CMD_MAC_CONTROL 0x0028 +#define CMD_802_11_AD_HOC_START 0x002b +#define CMD_802_11_AD_HOC_JOIN 0x002c +#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e +#define CMD_802_11_ENABLE_RSN 0x002f +#define CMD_802_11_SET_AFC 0x003c +#define CMD_802_11_GET_AFC 0x003d +#define CMD_802_11_DEEP_SLEEP 0x003e +#define CMD_802_11_AD_HOC_STOP 0x0040 +#define CMD_802_11_HOST_SLEEP_CFG 0x0043 +#define CMD_802_11_WAKEUP_CONFIRM 0x0044 +#define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045 +#define CMD_802_11_BEACON_STOP 0x0049 +#define CMD_802_11_MAC_ADDRESS 0x004d +#define CMD_802_11_LED_GPIO_CTRL 0x004e +#define CMD_802_11_EEPROM_ACCESS 0x0059 +#define CMD_802_11_BAND_CONFIG 0x0058 +#define CMD_GSPI_BUS_CONFIG 0x005a +#define CMD_802_11D_DOMAIN_INFO 0x005b +#define CMD_802_11_KEY_MATERIAL 0x005e +#define CMD_802_11_SLEEP_PARAMS 0x0066 +#define CMD_802_11_INACTIVITY_TIMEOUT 0x0067 +#define CMD_802_11_SLEEP_PERIOD 0x0068 +#define CMD_802_11_TPC_CFG 0x0072 +#define CMD_802_11_PA_CFG 0x0073 +#define CMD_802_11_FW_WAKE_METHOD 0x0074 +#define CMD_802_11_SUBSCRIBE_EVENT 0x0075 +#define CMD_802_11_RATE_ADAPT_RATESET 0x0076 +#define CMD_802_11_TX_RATE_QUERY 0x007f +#define CMD_GET_TSF 0x0080 +#define CMD_BT_ACCESS 0x0087 +#define CMD_FWT_ACCESS 0x0095 +#define CMD_802_11_MONITOR_MODE 0x0098 +#define CMD_MESH_ACCESS 0x009b +#define CMD_MESH_CONFIG_OLD 0x00a3 +#define CMD_MESH_CONFIG 0x00ac +#define CMD_SET_BOOT2_VER 0x00a5 +#define CMD_FUNC_INIT 0x00a9 +#define CMD_FUNC_SHUTDOWN 0x00aa +#define CMD_802_11_BEACON_CTRL 0x00b0 /* For the IEEE Power Save */ -#define CMD_SUBCMD_ENTER_PS 0x0030 -#define CMD_SUBCMD_EXIT_PS 0x0031 -#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034 -#define CMD_SUBCMD_FULL_POWERDOWN 0x0035 -#define CMD_SUBCMD_FULL_POWERUP 0x0036 +#define CMD_SUBCMD_ENTER_PS 0x0030 +#define CMD_SUBCMD_EXIT_PS 0x0031 +#define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034 +#define CMD_SUBCMD_FULL_POWERDOWN 0x0035 +#define CMD_SUBCMD_FULL_POWERUP 0x0036 -#define CMD_ENABLE_RSN 0x0001 -#define CMD_DISABLE_RSN 0x0000 +#define CMD_ENABLE_RSN 0x0001 +#define CMD_DISABLE_RSN 0x0000 -#define CMD_ACT_GET 0x0000 -#define CMD_ACT_SET 0x0001 -#define CMD_ACT_GET_AES 0x0002 -#define CMD_ACT_SET_AES 0x0003 -#define CMD_ACT_REMOVE_AES 0x0004 +#define CMD_ACT_GET 0x0000 +#define CMD_ACT_SET 0x0001 /* Define action or option for CMD_802_11_SET_WEP */ -#define CMD_ACT_ADD 0x0002 -#define CMD_ACT_REMOVE 0x0004 -#define CMD_ACT_USE_DEFAULT 0x0008 - -#define CMD_TYPE_WEP_40_BIT 0x01 -#define CMD_TYPE_WEP_104_BIT 0x02 +#define CMD_ACT_ADD 0x0002 +#define CMD_ACT_REMOVE 0x0004 -#define CMD_NUM_OF_WEP_KEYS 4 +#define CMD_TYPE_WEP_40_BIT 0x01 +#define CMD_TYPE_WEP_104_BIT 0x02 -#define CMD_WEP_KEY_INDEX_MASK 0x3fff +#define CMD_NUM_OF_WEP_KEYS 4 -/* Define action or option for CMD_802_11_RESET */ -#define CMD_ACT_HALT 0x0003 +#define CMD_WEP_KEY_INDEX_MASK 0x3fff /* Define action or option for CMD_802_11_SCAN */ -#define CMD_BSS_TYPE_BSS 0x0001 -#define CMD_BSS_TYPE_IBSS 0x0002 -#define CMD_BSS_TYPE_ANY 0x0003 +#define CMD_BSS_TYPE_BSS 0x0001 +#define CMD_BSS_TYPE_IBSS 0x0002 +#define CMD_BSS_TYPE_ANY 0x0003 /* Define action or option for CMD_802_11_SCAN */ -#define CMD_SCAN_TYPE_ACTIVE 0x0000 -#define CMD_SCAN_TYPE_PASSIVE 0x0001 +#define CMD_SCAN_TYPE_ACTIVE 0x0000 +#define CMD_SCAN_TYPE_PASSIVE 0x0001 -#define CMD_SCAN_RADIO_TYPE_BG 0 +#define CMD_SCAN_RADIO_TYPE_BG 0 -#define CMD_SCAN_PROBE_DELAY_TIME 0 +#define CMD_SCAN_PROBE_DELAY_TIME 0 /* Define action or option for CMD_MAC_CONTROL */ -#define CMD_ACT_MAC_RX_ON 0x0001 -#define CMD_ACT_MAC_TX_ON 0x0002 -#define CMD_ACT_MAC_LOOPBACK_ON 0x0004 -#define CMD_ACT_MAC_WEP_ENABLE 0x0008 -#define CMD_ACT_MAC_INT_ENABLE 0x0010 -#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 -#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 -#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 -#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 -#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 +#define CMD_ACT_MAC_RX_ON 0x0001 +#define CMD_ACT_MAC_TX_ON 0x0002 +#define CMD_ACT_MAC_LOOPBACK_ON 0x0004 +#define CMD_ACT_MAC_WEP_ENABLE 0x0008 +#define CMD_ACT_MAC_INT_ENABLE 0x0010 +#define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020 +#define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040 +#define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080 +#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100 +#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */ -#define CMD_SUBSCRIBE_RSSI_LOW 0x0001 -#define CMD_SUBSCRIBE_SNR_LOW 0x0002 -#define CMD_SUBSCRIBE_FAILCOUNT 0x0004 -#define CMD_SUBSCRIBE_BCNMISS 0x0008 -#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 -#define CMD_SUBSCRIBE_SNR_HIGH 0x0020 +#define CMD_SUBSCRIBE_RSSI_LOW 0x0001 +#define CMD_SUBSCRIBE_SNR_LOW 0x0002 +#define CMD_SUBSCRIBE_FAILCOUNT 0x0004 +#define CMD_SUBSCRIBE_BCNMISS 0x0008 +#define CMD_SUBSCRIBE_RSSI_HIGH 0x0010 +#define CMD_SUBSCRIBE_SNR_HIGH 0x0020 -#define RADIO_PREAMBLE_LONG 0x00 -#define RADIO_PREAMBLE_SHORT 0x02 -#define RADIO_PREAMBLE_AUTO 0x04 +#define RADIO_PREAMBLE_LONG 0x00 +#define RADIO_PREAMBLE_SHORT 0x02 +#define RADIO_PREAMBLE_AUTO 0x04 /* Define action or option for CMD_802_11_RF_CHANNEL */ -#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 -#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 +#define CMD_OPT_802_11_RF_CHANNEL_GET 0x00 +#define CMD_OPT_802_11_RF_CHANNEL_SET 0x01 /* Define action or option for CMD_802_11_DATA_RATE */ -#define CMD_ACT_SET_TX_AUTO 0x0000 -#define CMD_ACT_SET_TX_FIX_RATE 0x0001 -#define CMD_ACT_GET_TX_RATE 0x0002 - -#define CMD_ACT_SET_RX 0x0001 -#define CMD_ACT_SET_TX 0x0002 -#define CMD_ACT_SET_BOTH 0x0003 -#define CMD_ACT_GET_RX 0x0004 -#define CMD_ACT_GET_TX 0x0008 -#define CMD_ACT_GET_BOTH 0x000c +#define CMD_ACT_SET_TX_AUTO 0x0000 +#define CMD_ACT_SET_TX_FIX_RATE 0x0001 +#define CMD_ACT_GET_TX_RATE 0x0002 /* Define action or option for CMD_802_11_PS_MODE */ -#define CMD_TYPE_CAM 0x0000 -#define CMD_TYPE_MAX_PSP 0x0001 -#define CMD_TYPE_FAST_PSP 0x0002 +#define CMD_TYPE_CAM 0x0000 +#define CMD_TYPE_MAX_PSP 0x0001 +#define CMD_TYPE_FAST_PSP 0x0002 /* Options for CMD_802_11_FW_WAKE_METHOD */ -#define CMD_WAKE_METHOD_UNCHANGED 0x0000 -#define CMD_WAKE_METHOD_COMMAND_INT 0x0001 -#define CMD_WAKE_METHOD_GPIO 0x0002 +#define CMD_WAKE_METHOD_UNCHANGED 0x0000 +#define CMD_WAKE_METHOD_COMMAND_INT 0x0001 +#define CMD_WAKE_METHOD_GPIO 0x0002 /* Object IDs for CMD_802_11_SNMP_MIB */ -#define SNMP_MIB_OID_BSS_TYPE 0x0000 -#define SNMP_MIB_OID_OP_RATE_SET 0x0001 -#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */ -#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */ -#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */ -#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005 -#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006 -#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007 -#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008 -#define SNMP_MIB_OID_11D_ENABLE 0x0009 -#define SNMP_MIB_OID_11H_ENABLE 0x000A +#define SNMP_MIB_OID_BSS_TYPE 0x0000 +#define SNMP_MIB_OID_OP_RATE_SET 0x0001 +#define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */ +#define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */ +#define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */ +#define SNMP_MIB_OID_RTS_THRESHOLD 0x0005 +#define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006 +#define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007 +#define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008 +#define SNMP_MIB_OID_11D_ENABLE 0x0009 +#define SNMP_MIB_OID_11H_ENABLE 0x000A /* Define action or option for CMD_BT_ACCESS */ enum cmd_bt_access_opts { @@ -302,4 +291,672 @@ enum cmd_mesh_config_types { #define MACREG_INT_CODE_MESH_AUTO_STARTED 35 #define MACREG_INT_CODE_FIRMWARE_READY 48 + +/* 802.11-related definitions */ + +/* TxPD descriptor */ +struct txpd { + /* union to cope up with later FW revisions */ + union { + /* Current Tx packet status */ + __le32 tx_status; + struct { + /* BSS type: client, AP, etc. */ + u8 bss_type; + /* BSS number */ + u8 bss_num; + /* Reserved */ + __le16 reserved; + } bss; + } u; + /* Tx control */ + __le32 tx_control; + __le32 tx_packet_location; + /* Tx packet length */ + __le16 tx_packet_length; + /* First 2 byte of destination MAC address */ + u8 tx_dest_addr_high[2]; + /* Last 4 byte of destination MAC address */ + u8 tx_dest_addr_low[4]; + /* Pkt Priority */ + u8 priority; + /* Pkt Trasnit Power control */ + u8 powermgmt; + /* Amount of time the packet has been queued (units = 2ms) */ + u8 pktdelay_2ms; + /* reserved */ + u8 reserved1; +} __attribute__ ((packed)); + +/* RxPD Descriptor */ +struct rxpd { + /* union to cope up with later FW revisions */ + union { + /* Current Rx packet status */ + __le16 status; + struct { + /* BSS type: client, AP, etc. */ + u8 bss_type; + /* BSS number */ + u8 bss_num; + } __attribute__ ((packed)) bss; + } __attribute__ ((packed)) u; + + /* SNR */ + u8 snr; + + /* Tx control */ + u8 rx_control; + + /* Pkt length */ + __le16 pkt_len; + + /* Noise Floor */ + u8 nf; + + /* Rx Packet Rate */ + u8 rx_rate; + + /* Pkt addr */ + __le32 pkt_ptr; + + /* Next Rx RxPD addr */ + __le32 next_rxpd_ptr; + + /* Pkt Priority */ + u8 priority; + u8 reserved[3]; +} __attribute__ ((packed)); + +struct cmd_header { + __le16 command; + __le16 size; + __le16 seqnum; + __le16 result; +} __attribute__ ((packed)); + +/* Generic structure to hold all key types. */ +struct enc_key { + u16 len; + u16 flags; /* KEY_INFO_* from defs.h */ + u16 type; /* KEY_TYPE_* from defs.h */ + u8 key[32]; +}; + +/* lbs_offset_value */ +struct lbs_offset_value { + u32 offset; + u32 value; +} __attribute__ ((packed)); + +/* + * Define data structure for CMD_GET_HW_SPEC + * This structure defines the response for the GET_HW_SPEC command + */ +struct cmd_ds_get_hw_spec { + struct cmd_header hdr; + + /* HW Interface version number */ + __le16 hwifversion; + /* HW version number */ + __le16 version; + /* Max number of TxPD FW can handle */ + __le16 nr_txpd; + /* Max no of Multicast address */ + __le16 nr_mcast_adr; + /* MAC address */ + u8 permanentaddr[6]; + + /* region Code */ + __le16 regioncode; + + /* Number of antenna used */ + __le16 nr_antenna; + + /* FW release number, example 0x01030304 = 2.3.4p1 */ + __le32 fwrelease; + + /* Base Address of TxPD queue */ + __le32 wcb_base; + /* Read Pointer of RxPd queue */ + __le32 rxpd_rdptr; + + /* Write Pointer of RxPd queue */ + __le32 rxpd_wrptr; + + /*FW/HW capability */ + __le32 fwcapinfo; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_subscribe_event { + struct cmd_header hdr; + + __le16 action; + __le16 events; + + /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a + * number of TLVs. From the v5.1 manual, those TLVs would add up to + * 40 bytes. However, future firmware might add additional TLVs, so I + * bump this up a bit. + */ + uint8_t tlv[128]; +} __attribute__ ((packed)); + +/* + * This scan handle Country Information IE(802.11d compliant) + * Define data structure for CMD_802_11_SCAN + */ +struct cmd_ds_802_11_scan { + struct cmd_header hdr; + + uint8_t bsstype; + uint8_t bssid[ETH_ALEN]; + uint8_t tlvbuffer[0]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_scan_rsp { + struct cmd_header hdr; + + __le16 bssdescriptsize; + uint8_t nr_sets; + uint8_t bssdesc_and_tlvbuffer[0]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_get_log { + struct cmd_header hdr; + + __le32 mcasttxframe; + __le32 failed; + __le32 retry; + __le32 multiretry; + __le32 framedup; + __le32 rtssuccess; + __le32 rtsfailure; + __le32 ackfailure; + __le32 rxfrag; + __le32 mcastrxframe; + __le32 fcserror; + __le32 txframe; + __le32 wepundecryptable; +} __attribute__ ((packed)); + +struct cmd_ds_mac_control { + struct cmd_header hdr; + __le16 action; + u16 reserved; +} __attribute__ ((packed)); + +struct cmd_ds_mac_multicast_adr { + struct cmd_header hdr; + __le16 action; + __le16 nr_of_adrs; + u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_authenticate { + struct cmd_header hdr; + + u8 bssid[ETH_ALEN]; + u8 authtype; + u8 reserved[10]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_deauthenticate { + struct cmd_header hdr; + + u8 macaddr[ETH_ALEN]; + __le16 reasoncode; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_associate { + struct cmd_header hdr; + + u8 bssid[6]; + __le16 capability; + __le16 listeninterval; + __le16 bcnperiod; + u8 dtimperiod; + u8 iebuf[512]; /* Enough for required and most optional IEs */ +} __attribute__ ((packed)); + +struct cmd_ds_802_11_associate_response { + struct cmd_header hdr; + + __le16 capability; + __le16 statuscode; + __le16 aid; + u8 iebuf[512]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_set_wep { + struct cmd_header hdr; + + /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */ + __le16 action; + + /* key Index selected for Tx */ + __le16 keyindex; + + /* 40, 128bit or TXWEP */ + uint8_t keytype[4]; + uint8_t keymaterial[4][16]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_snmp_mib { + struct cmd_header hdr; + + __le16 action; + __le16 oid; + __le16 bufsize; + u8 value[128]; +} __attribute__ ((packed)); + +struct cmd_ds_mac_reg_access { + __le16 action; + __le16 offset; + __le32 value; +} __attribute__ ((packed)); + +struct cmd_ds_bbp_reg_access { + __le16 action; + __le16 offset; + u8 value; + u8 reserved[3]; +} __attribute__ ((packed)); + +struct cmd_ds_rf_reg_access { + __le16 action; + __le16 offset; + u8 value; + u8 reserved[3]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_radio_control { + struct cmd_header hdr; + + __le16 action; + __le16 control; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_beacon_control { + __le16 action; + __le16 beacon_enable; + __le16 beacon_period; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_sleep_params { + struct cmd_header hdr; + + /* ACT_GET/ACT_SET */ + __le16 action; + + /* Sleep clock error in ppm */ + __le16 error; + + /* Wakeup offset in usec */ + __le16 offset; + + /* Clock stabilization time in usec */ + __le16 stabletime; + + /* control periodic calibration */ + uint8_t calcontrol; + + /* control the use of external sleep clock */ + uint8_t externalsleepclk; + + /* reserved field, should be set to zero */ + __le16 reserved; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_rf_channel { + struct cmd_header hdr; + + __le16 action; + __le16 channel; + __le16 rftype; /* unused */ + __le16 reserved; /* unused */ + u8 channellist[32]; /* unused */ +} __attribute__ ((packed)); + +struct cmd_ds_802_11_rssi { + /* weighting factor */ + __le16 N; + + __le16 reserved_0; + __le16 reserved_1; + __le16 reserved_2; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_rssi_rsp { + __le16 SNR; + __le16 noisefloor; + __le16 avgSNR; + __le16 avgnoisefloor; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_mac_address { + struct cmd_header hdr; + + __le16 action; + u8 macadd[ETH_ALEN]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_rf_tx_power { + struct cmd_header hdr; + + __le16 action; + __le16 curlevel; + s8 maxlevel; + s8 minlevel; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_monitor_mode { + __le16 action; + __le16 mode; +} __attribute__ ((packed)); + +struct cmd_ds_set_boot2_ver { + struct cmd_header hdr; + + __le16 action; + __le16 version; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_fw_wake_method { + struct cmd_header hdr; + + __le16 action; + __le16 method; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_ps_mode { + __le16 action; + __le16 nullpktinterval; + __le16 multipledtim; + __le16 reserved; + __le16 locallisteninterval; +} __attribute__ ((packed)); + +struct cmd_confirm_sleep { + struct cmd_header hdr; + + __le16 action; + __le16 nullpktinterval; + __le16 multipledtim; + __le16 reserved; + __le16 locallisteninterval; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_data_rate { + struct cmd_header hdr; + + __le16 action; + __le16 reserved; + u8 rates[MAX_RATES]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_rate_adapt_rateset { + struct cmd_header hdr; + __le16 action; + __le16 enablehwauto; + __le16 bitmap; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_ad_hoc_start { + struct cmd_header hdr; + + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 bsstype; + __le16 beaconperiod; + u8 dtimperiod; /* Reserved on v9 and later */ + struct ieee_ie_ibss_param_set ibss; + u8 reserved1[4]; + struct ieee_ie_ds_param_set ds; + u8 reserved2[4]; + __le16 probedelay; /* Reserved on v9 and later */ + __le16 capability; + u8 rates[MAX_RATES]; + u8 tlv_memory_size_pad[100]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_ad_hoc_result { + struct cmd_header hdr; + + u8 pad[3]; + u8 bssid[ETH_ALEN]; +} __attribute__ ((packed)); + +struct adhoc_bssdesc { + u8 bssid[ETH_ALEN]; + u8 ssid[IEEE80211_MAX_SSID_LEN]; + u8 type; + __le16 beaconperiod; + u8 dtimperiod; + __le64 timestamp; + __le64 localtime; + struct ieee_ie_ds_param_set ds; + u8 reserved1[4]; + struct ieee_ie_ibss_param_set ibss; + u8 reserved2[4]; + __le16 capability; + u8 rates[MAX_RATES]; + + /* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the + * Adhoc join command and will cause a binary layout mismatch with + * the firmware + */ +} __attribute__ ((packed)); + +struct cmd_ds_802_11_ad_hoc_join { + struct cmd_header hdr; + + struct adhoc_bssdesc bss; + __le16 failtimeout; /* Reserved on v9 and later */ + __le16 probedelay; /* Reserved on v9 and later */ +} __attribute__ ((packed)); + +struct cmd_ds_802_11_ad_hoc_stop { + struct cmd_header hdr; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_enable_rsn { + struct cmd_header hdr; + + __le16 action; + __le16 enable; +} __attribute__ ((packed)); + +struct MrvlIEtype_keyParamSet { + /* type ID */ + __le16 type; + + /* length of Payload */ + __le16 length; + + /* type of key: WEP=0, TKIP=1, AES=2 */ + __le16 keytypeid; + + /* key control Info specific to a keytypeid */ + __le16 keyinfo; + + /* length of key */ + __le16 keylen; + + /* key material of size keylen */ + u8 key[32]; +} __attribute__ ((packed)); + +#define MAX_WOL_RULES 16 + +struct host_wol_rule { + uint8_t rule_no; + uint8_t rule_ops; + __le16 sig_offset; + __le16 sig_length; + __le16 reserve; + __be32 sig_mask; + __be32 signature; +} __attribute__ ((packed)); + +struct wol_config { + uint8_t action; + uint8_t pattern; + uint8_t no_rules_in_cmd; + uint8_t result; + struct host_wol_rule rule[MAX_WOL_RULES]; +} __attribute__ ((packed)); + +struct cmd_ds_host_sleep { + struct cmd_header hdr; + __le32 criteria; + uint8_t gpio; + uint16_t gap; + struct wol_config wol_conf; +} __attribute__ ((packed)); + + + +struct cmd_ds_802_11_key_material { + struct cmd_header hdr; + + __le16 action; + struct MrvlIEtype_keyParamSet keyParamSet[2]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_eeprom_access { + struct cmd_header hdr; + __le16 action; + __le16 offset; + __le16 len; + /* firmware says it returns a maximum of 20 bytes */ +#define LBS_EEPROM_READ_LEN 20 + u8 value[LBS_EEPROM_READ_LEN]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_tpc_cfg { + struct cmd_header hdr; + + __le16 action; + uint8_t enable; + int8_t P0; + int8_t P1; + int8_t P2; + uint8_t usesnr; +} __attribute__ ((packed)); + + +struct cmd_ds_802_11_pa_cfg { + struct cmd_header hdr; + + __le16 action; + uint8_t enable; + int8_t P0; + int8_t P1; + int8_t P2; +} __attribute__ ((packed)); + + +struct cmd_ds_802_11_led_ctrl { + __le16 action; + __le16 numled; + u8 data[256]; +} __attribute__ ((packed)); + +struct cmd_ds_802_11_afc { + __le16 afc_auto; + union { + struct { + __le16 threshold; + __le16 period; + }; + struct { + __le16 timing_offset; /* signed */ + __le16 carrier_offset; /* signed */ + }; + }; +} __attribute__ ((packed)); + +struct cmd_tx_rate_query { + __le16 txrate; +} __attribute__ ((packed)); + +struct cmd_ds_get_tsf { + __le64 tsfvalue; +} __attribute__ ((packed)); + +struct cmd_ds_bt_access { + __le16 action; + __le32 id; + u8 addr1[ETH_ALEN]; + u8 addr2[ETH_ALEN]; +} __attribute__ ((packed)); + +struct cmd_ds_fwt_access { + __le16 action; + __le32 id; + u8 valid; + u8 da[ETH_ALEN]; + u8 dir; + u8 ra[ETH_ALEN]; + __le32 ssn; + __le32 dsn; + __le32 metric; + u8 rate; + u8 hopcount; + u8 ttl; + __le32 expiration; + u8 sleepmode; + __le32 snr; + __le32 references; + u8 prec[ETH_ALEN]; +} __attribute__ ((packed)); + +struct cmd_ds_mesh_config { + struct cmd_header hdr; + + __le16 action; + __le16 channel; + __le16 type; + __le16 length; + u8 data[128]; /* last position reserved */ +} __attribute__ ((packed)); + +struct cmd_ds_mesh_access { + struct cmd_header hdr; + + __le16 action; + __le32 data[32]; /* last position reserved */ +} __attribute__ ((packed)); + +/* Number of stats counters returned by the firmware */ +#define MESH_STATS_NUM 8 + +struct cmd_ds_command { + /* command header */ + __le16 command; + __le16 size; + __le16 seqnum; + __le16 result; + + /* command Body */ + union { + struct cmd_ds_802_11_ps_mode psmode; + struct cmd_ds_802_11_monitor_mode monitor; + struct cmd_ds_802_11_rssi rssi; + struct cmd_ds_802_11_rssi_rsp rssirsp; + struct cmd_ds_mac_reg_access macreg; + struct cmd_ds_bbp_reg_access bbpreg; + struct cmd_ds_rf_reg_access rfreg; + + struct cmd_ds_802_11_tpc_cfg tpccfg; + struct cmd_ds_802_11_afc afc; + struct cmd_ds_802_11_led_ctrl ledgpio; + + struct cmd_ds_bt_access bt; + struct cmd_ds_fwt_access fwt; + struct cmd_ds_802_11_beacon_control bcn_ctrl; + } params; +} __attribute__ ((packed)); + #endif |