summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/iwl-core.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-core.h')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h64
1 files changed, 21 insertions, 43 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 692c30cb2fac..3e6bb734dcb7 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -83,14 +83,12 @@ struct iwl_cmd;
struct iwl_lib_ops {
/* set hw dependent parameters */
int (*set_hw_params)(struct iwl_priv *priv);
- /* setup Rx handler */
- void (*rx_handler_setup)(struct iwl_priv *priv);
- /* setup deferred work */
- void (*setup_deferred_work)(struct iwl_priv *priv);
+ /* setup BT Rx handler */
+ void (*bt_rx_handler_setup)(struct iwl_priv *priv);
+ /* setup BT related deferred work */
+ void (*bt_setup_deferred_work)(struct iwl_priv *priv);
/* cancel deferred work */
void (*cancel_deferred_work)(struct iwl_priv *priv);
- /* check validity of rtc data address */
- int (*is_valid_rtc_data_addr)(u32 addr);
int (*set_channel_switch)(struct iwl_priv *priv,
struct ieee80211_channel_switch *ch_switch);
/* device specific configuration */
@@ -103,16 +101,6 @@ struct iwl_lib_ops {
void (*temperature)(struct iwl_priv *priv);
};
-/* NIC specific ops */
-struct iwl_nic_ops {
- void (*additional_nic_config)(struct iwl_priv *priv);
-};
-
-struct iwl_ops {
- const struct iwl_lib_ops *lib;
- const struct iwl_nic_ops *nic;
-};
-
struct iwl_mod_params {
int sw_crypto; /* def: 0 = using hardware encryption */
int num_of_queues; /* def: HW dependent */
@@ -199,11 +187,22 @@ struct iwl_ht_params {
/**
* struct iwl_cfg
+ * @name: Offical name of the device
* @fw_name_pre: Firmware filename prefix. The api version and extension
* (.ucode) will be added to filename before loading from disk. The
* filename is constructed as fw_name_pre<api>.ucode.
* @ucode_api_max: Highest version of uCode API supported by driver.
* @ucode_api_min: Lowest version of uCode API supported by driver.
+ * @valid_tx_ant: valid transmit antenna
+ * @valid_rx_ant: valid receive antenna
+ * @sku: sku information from EEPROM
+ * @eeprom_ver: EEPROM version
+ * @eeprom_calib_ver: EEPROM calibration version
+ * @lib: pointer to the lib ops
+ * @additional_nic_config: additional nic configuration
+ * @base_params: pointer to basic parameters
+ * @ht_params: point to ht patameters
+ * @bt_params: pointer to bt parameters
* @pa_type: used by 6000 series only to identify the type of Power Amplifier
* @need_dc_calib: need to perform init dc calibration
* @need_temp_offset_calib: need to perform temperature offset calibration
@@ -213,7 +212,6 @@ struct iwl_ht_params {
* @rx_with_siso_diversity: 1x1 device with rx antenna diversity
* @internal_wimax_coex: internal wifi/wimax combo device
* @iq_invert: I/Q inversion
- * @disable_otp_refresh: disable OTP refresh current limit
*
* We enable the driver to be backward compatible wrt API version. The
* driver specifies which APIs it supports (with @ucode_api_max being the
@@ -230,11 +228,7 @@ struct iwl_ht_params {
* }
*
* The ideal usage of this infrastructure is to treat a new ucode API
- * release as a new hardware revision. That is, through utilizing the
- * iwl_hcmd_utils_ops etc. we accommodate different command structures
- * and flows between hardware versions (4965/5000) as well as their API
- * versions.
- *
+ * release as a new hardware revision.
*/
struct iwl_cfg {
/* params specific to an individual device within a device family */
@@ -247,7 +241,8 @@ struct iwl_cfg {
u16 sku;
u16 eeprom_ver;
u16 eeprom_calib_ver;
- const struct iwl_ops *ops;
+ const struct iwl_lib_ops *lib;
+ void (*additional_nic_config)(struct iwl_priv *priv);
/* params not likely to change within a device family */
struct iwl_base_params *base_params;
/* params likely to change within a device family */
@@ -262,7 +257,6 @@ struct iwl_cfg {
const bool rx_with_siso_diversity;
const bool internal_wimax_coex;
const bool iq_invert;
- const bool disable_otp_refresh;
};
/***************************
@@ -340,21 +334,8 @@ static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx,
/*****************************************************
* RX
******************************************************/
-void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
- struct iwl_rx_queue *q);
-int iwl_rx_queue_space(const struct iwl_rx_queue *q);
-void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
-
void iwl_chswitch_done(struct iwl_priv *priv, bool is_success);
-/* TX helpers */
-
-/*****************************************************
-* TX
-******************************************************/
-void iwl_txq_update_write_ptr(struct iwl_priv *priv, struct iwl_tx_queue *txq);
-int iwl_queue_init(struct iwl_priv *priv, struct iwl_queue *q,
- int count, int slots_num, u32 id);
void iwl_setup_watchdog(struct iwl_priv *priv);
/*****************************************************
* TX power
@@ -405,12 +386,6 @@ int __must_check iwl_scan_initiate(struct iwl_priv *priv,
*****************************************************/
const char *get_cmd_string(u8 cmd);
-int iwl_send_cmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
-int __must_check iwl_send_cmd_pdu(struct iwl_priv *priv, u8 id, u32 flags,
- u16 len, const void *data);
-
-int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
-
void iwl_bg_watchdog(unsigned long data);
u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval);
__le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
@@ -421,6 +396,9 @@ int iwl_suspend(struct iwl_priv *priv);
int iwl_resume(struct iwl_priv *priv);
#endif /* !CONFIG_PM */
+int iwl_probe(struct iwl_bus *bus, struct iwl_cfg *cfg);
+void __devexit iwl_remove(struct iwl_priv * priv);
+
/*****************************************************
* Error Handling Debugging
******************************************************/