summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wireless/ath/ath9k/main.c')
-rw-r--r--drivers/net/wireless/ath/ath9k/main.c206
1 files changed, 96 insertions, 110 deletions
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 2398d4f45f28..bbbfdcde2727 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -189,7 +189,7 @@ static u8 parse_mpdudensity(u8 mpdudensity)
static void ath_setup_rates(struct ath_softc *sc, enum ieee80211_band band)
{
- struct ath_rate_table *rate_table = NULL;
+ const struct ath_rate_table *rate_table = NULL;
struct ieee80211_supported_band *sband;
struct ieee80211_rate *rate;
int i, maxrates;
@@ -2358,114 +2358,6 @@ skip_chan_change:
if (changed & IEEE80211_CONF_CHANGE_POWER)
sc->config.txpowlimit = 2 * conf->power_level;
- /*
- * The HW TSF has to be reset when the beacon interval changes.
- * We set the flag here, and ath_beacon_config_ap() would take this
- * into account when it gets called through the subsequent
- * config_interface() call - with IFCC_BEACON in the changed field.
- */
-
- if (changed & IEEE80211_CONF_CHANGE_BEACON_INTERVAL)
- sc->sc_flags |= SC_OP_TSF_RESET;
-
- mutex_unlock(&sc->mutex);
-
- return 0;
-}
-
-static int ath9k_config_interface(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_if_conf *conf)
-{
- struct ath_wiphy *aphy = hw->priv;
- struct ath_softc *sc = aphy->sc;
- struct ath_hw *ah = sc->sc_ah;
- struct ath_vif *avp = (void *)vif->drv_priv;
- u32 rfilt = 0;
- int error, i;
-
- mutex_lock(&sc->mutex);
-
- /* TODO: Need to decide which hw opmode to use for multi-interface
- * cases */
- if (vif->type == NL80211_IFTYPE_AP &&
- ah->opmode != NL80211_IFTYPE_AP) {
- ah->opmode = NL80211_IFTYPE_STATION;
- ath9k_hw_setopmode(ah);
- memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
- sc->curaid = 0;
- ath9k_hw_write_associd(sc);
- /* Request full reset to get hw opmode changed properly */
- sc->sc_flags |= SC_OP_FULL_RESET;
- }
-
- if ((conf->changed & IEEE80211_IFCC_BSSID) &&
- !is_zero_ether_addr(conf->bssid)) {
- switch (vif->type) {
- case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_MESH_POINT:
- /* Set BSSID */
- memcpy(sc->curbssid, conf->bssid, ETH_ALEN);
- memcpy(avp->bssid, conf->bssid, ETH_ALEN);
- sc->curaid = 0;
- ath9k_hw_write_associd(sc);
-
- /* Set aggregation protection mode parameters */
- sc->config.ath_aggr_prot = 0;
-
- DPRINTF(sc, ATH_DBG_CONFIG,
- "RX filter 0x%x bssid %pM aid 0x%x\n",
- rfilt, sc->curbssid, sc->curaid);
-
- /* need to reconfigure the beacon */
- sc->sc_flags &= ~SC_OP_BEACONS ;
-
- break;
- default:
- break;
- }
- }
-
- if ((vif->type == NL80211_IFTYPE_ADHOC) ||
- (vif->type == NL80211_IFTYPE_AP) ||
- (vif->type == NL80211_IFTYPE_MESH_POINT)) {
- if ((conf->changed & IEEE80211_IFCC_BEACON) ||
- (conf->changed & IEEE80211_IFCC_BEACON_ENABLED &&
- conf->enable_beacon)) {
- /*
- * Allocate and setup the beacon frame.
- *
- * Stop any previous beacon DMA. This may be
- * necessary, for example, when an ibss merge
- * causes reconfiguration; we may be called
- * with beacon transmission active.
- */
- ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
-
- error = ath_beacon_alloc(aphy, vif);
- if (error != 0) {
- mutex_unlock(&sc->mutex);
- return error;
- }
-
- ath_beacon_config(sc, vif);
- }
- }
-
- /* Check for WLAN_CAPABILITY_PRIVACY ? */
- if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
- for (i = 0; i < IEEE80211_WEP_NKID; i++)
- if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
- ath9k_hw_keysetmac(sc->sc_ah,
- (u16)i,
- sc->curbssid);
- }
-
- /* Only legacy IBSS for now */
- if (vif->type == NL80211_IFTYPE_ADHOC)
- ath_update_chainmask(sc, 0);
-
mutex_unlock(&sc->mutex);
return 0;
@@ -2607,9 +2499,92 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
{
struct ath_wiphy *aphy = hw->priv;
struct ath_softc *sc = aphy->sc;
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_vif *avp = (void *)vif->drv_priv;
+ u32 rfilt = 0;
+ int error, i;
mutex_lock(&sc->mutex);
+ /*
+ * TODO: Need to decide which hw opmode to use for
+ * multi-interface cases
+ * XXX: This belongs into add_interface!
+ */
+ if (vif->type == NL80211_IFTYPE_AP &&
+ ah->opmode != NL80211_IFTYPE_AP) {
+ ah->opmode = NL80211_IFTYPE_STATION;
+ ath9k_hw_setopmode(ah);
+ memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
+ sc->curaid = 0;
+ ath9k_hw_write_associd(sc);
+ /* Request full reset to get hw opmode changed properly */
+ sc->sc_flags |= SC_OP_FULL_RESET;
+ }
+
+ if ((changed & BSS_CHANGED_BSSID) &&
+ !is_zero_ether_addr(bss_conf->bssid)) {
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_MESH_POINT:
+ /* Set BSSID */
+ memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
+ memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
+ sc->curaid = 0;
+ ath9k_hw_write_associd(sc);
+
+ /* Set aggregation protection mode parameters */
+ sc->config.ath_aggr_prot = 0;
+
+ DPRINTF(sc, ATH_DBG_CONFIG,
+ "RX filter 0x%x bssid %pM aid 0x%x\n",
+ rfilt, sc->curbssid, sc->curaid);
+
+ /* need to reconfigure the beacon */
+ sc->sc_flags &= ~SC_OP_BEACONS ;
+
+ break;
+ default:
+ break;
+ }
+ }
+
+ if ((vif->type == NL80211_IFTYPE_ADHOC) ||
+ (vif->type == NL80211_IFTYPE_AP) ||
+ (vif->type == NL80211_IFTYPE_MESH_POINT)) {
+ if ((changed & BSS_CHANGED_BEACON) ||
+ (changed & BSS_CHANGED_BEACON_ENABLED &&
+ bss_conf->enable_beacon)) {
+ /*
+ * Allocate and setup the beacon frame.
+ *
+ * Stop any previous beacon DMA. This may be
+ * necessary, for example, when an ibss merge
+ * causes reconfiguration; we may be called
+ * with beacon transmission active.
+ */
+ ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
+
+ error = ath_beacon_alloc(aphy, vif);
+ if (!error)
+ ath_beacon_config(sc, vif);
+ }
+ }
+
+ /* Check for WLAN_CAPABILITY_PRIVACY ? */
+ if ((avp->av_opmode != NL80211_IFTYPE_STATION)) {
+ for (i = 0; i < IEEE80211_WEP_NKID; i++)
+ if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
+ ath9k_hw_keysetmac(sc->sc_ah,
+ (u16)i,
+ sc->curbssid);
+ }
+
+ /* Only legacy IBSS for now */
+ if (vif->type == NL80211_IFTYPE_ADHOC)
+ ath_update_chainmask(sc, 0);
+
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
bss_conf->use_short_preamble);
@@ -2635,6 +2610,18 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
ath9k_bss_assoc_info(sc, vif, bss_conf);
}
+ /*
+ * The HW TSF has to be reset when the beacon interval changes.
+ * We set the flag here, and ath_beacon_config_ap() would take this
+ * into account when it gets called through the subsequent
+ * config_interface() call - with IFCC_BEACON in the changed field.
+ */
+
+ if (changed & BSS_CHANGED_BEACON_INT) {
+ sc->sc_flags |= SC_OP_TSF_RESET;
+ sc->beacon_interval = bss_conf->beacon_int;
+ }
+
mutex_unlock(&sc->mutex);
}
@@ -2755,7 +2742,6 @@ struct ieee80211_ops ath9k_ops = {
.add_interface = ath9k_add_interface,
.remove_interface = ath9k_remove_interface,
.config = ath9k_config,
- .config_interface = ath9k_config_interface,
.configure_filter = ath9k_configure_filter,
.sta_notify = ath9k_sta_notify,
.conf_tx = ath9k_conf_tx,
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-27 10:21:35 +0000