diff options
Diffstat (limited to 'drivers/net/wireless/ath/ath10k/wmi-tlv.h')
| -rw-r--r-- | drivers/net/wireless/ath/ath10k/wmi-tlv.h | 254 |
1 files changed, 254 insertions, 0 deletions
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.h b/drivers/net/wireless/ath/ath10k/wmi-tlv.h index 4f0c20c90642..92c25f51bf86 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.h +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.h @@ -2146,6 +2146,260 @@ struct wmi_tlv_tdls_peer_event { void ath10k_wmi_tlv_attach(struct ath10k *ar); +enum wmi_nlo_auth_algorithm { + WMI_NLO_AUTH_ALGO_80211_OPEN = 1, + WMI_NLO_AUTH_ALGO_80211_SHARED_KEY = 2, + WMI_NLO_AUTH_ALGO_WPA = 3, + WMI_NLO_AUTH_ALGO_WPA_PSK = 4, + WMI_NLO_AUTH_ALGO_WPA_NONE = 5, + WMI_NLO_AUTH_ALGO_RSNA = 6, + WMI_NLO_AUTH_ALGO_RSNA_PSK = 7, +}; + +enum wmi_nlo_cipher_algorithm { + WMI_NLO_CIPHER_ALGO_NONE = 0x00, + WMI_NLO_CIPHER_ALGO_WEP40 = 0x01, + WMI_NLO_CIPHER_ALGO_TKIP = 0x02, + WMI_NLO_CIPHER_ALGO_CCMP = 0x04, + WMI_NLO_CIPHER_ALGO_WEP104 = 0x05, + WMI_NLO_CIPHER_ALGO_BIP = 0x06, + WMI_NLO_CIPHER_ALGO_RSN_USE_GROUP = 0x100, + WMI_NLO_CIPHER_ALGO_WEP = 0x101, +}; + +/* SSID broadcast type passed in NLO params */ +enum wmi_nlo_ssid_bcastnwtype { + WMI_NLO_BCAST_UNKNOWN = 0, + WMI_NLO_BCAST_NORMAL = 1, + WMI_NLO_BCAST_HIDDEN = 2, +}; + +#define WMI_NLO_MAX_SSIDS 16 +#define WMI_NLO_MAX_CHAN 48 + +#define WMI_NLO_CONFIG_STOP (0x1 << 0) +#define WMI_NLO_CONFIG_START (0x1 << 1) +#define WMI_NLO_CONFIG_RESET (0x1 << 2) +#define WMI_NLO_CONFIG_SLOW_SCAN (0x1 << 4) +#define WMI_NLO_CONFIG_FAST_SCAN (0x1 << 5) +#define WMI_NLO_CONFIG_SSID_HIDE_EN (0x1 << 6) + +/* This bit is used to indicate if EPNO or supplicant PNO is enabled. + * Only one of them can be enabled at a given time + */ +#define WMI_NLO_CONFIG_ENLO (0x1 << 7) +#define WMI_NLO_CONFIG_SCAN_PASSIVE (0x1 << 8) +#define WMI_NLO_CONFIG_ENLO_RESET (0x1 << 9) +#define WMI_NLO_CONFIG_SPOOFED_MAC_IN_PROBE_REQ (0x1 << 10) +#define WMI_NLO_CONFIG_RANDOM_SEQ_NO_IN_PROBE_REQ (0x1 << 11) +#define WMI_NLO_CONFIG_ENABLE_IE_WHITELIST_IN_PROBE_REQ (0x1 << 12) +#define WMI_NLO_CONFIG_ENABLE_CNLO_RSSI_CONFIG (0x1 << 13) + +/* Whether directed scan needs to be performed (for hidden SSIDs) */ +#define WMI_ENLO_FLAG_DIRECTED_SCAN 1 + +/* Whether PNO event shall be triggered if the network is found on A band */ +#define WMI_ENLO_FLAG_A_BAND 2 + +/* Whether PNO event shall be triggered if the network is found on G band */ +#define WMI_ENLO_FLAG_G_BAND 4 + +/* Whether strict matching is required (i.e. firmware shall not + * match on the entire SSID) + */ +#define WMI_ENLO_FLAG_STRICT_MATCH 8 + +/* Code for matching the beacon AUTH IE - additional codes TBD */ +/* open */ +#define WMI_ENLO_AUTH_CODE_OPEN 1 + +/* WPA_PSK or WPA2PSK */ +#define WMI_ENLO_AUTH_CODE_PSK 2 + +/* any EAPOL */ +#define WMI_ENLO_AUTH_CODE_EAPOL 4 + +struct wmi_nlo_ssid_param { + __le32 valid; + struct wmi_ssid ssid; +} __packed; + +struct wmi_nlo_enc_param { + __le32 valid; + __le32 enc_type; +} __packed; + +struct wmi_nlo_auth_param { + __le32 valid; + __le32 auth_type; +} __packed; + +struct wmi_nlo_bcast_nw_param { + __le32 valid; + + /* If WMI_NLO_CONFIG_EPNO is not set. Supplicant PNO is enabled. + * The value should be true/false. Otherwise EPNO is enabled. + * bcast_nw_type would be used as a bit flag contains WMI_ENLO_FLAG_XXX + */ + __le32 bcast_nw_type; +} __packed; + +struct wmi_nlo_rssi_param { + __le32 valid; + __le32 rssi; +} __packed; + +struct nlo_configured_parameters { + /* TLV tag and len;*/ + __le32 tlv_header; + struct wmi_nlo_ssid_param ssid; + struct wmi_nlo_enc_param enc_type; + struct wmi_nlo_auth_param auth_type; + struct wmi_nlo_rssi_param rssi_cond; + + /* indicates if the SSID is hidden or not */ + struct wmi_nlo_bcast_nw_param bcast_nw_type; +} __packed; + +/* Support channel prediction for PNO scan after scanning top_k_num channels + * if stationary_threshold is met. + */ +struct nlo_channel_prediction_cfg { + __le32 tlv_header; + + /* Enable or disable this feature. */ + __le32 enable; + + /* Top K channels will be scanned before deciding whether to further scan + * or stop. Minimum value is 3 and maximum is 5. + */ + __le32 top_k_num; + + /* Preconfigured stationary threshold. + * Lesser value means more conservative. Bigger value means more aggressive. + * Maximum is 100 and mininum is 0. + */ + __le32 stationary_threshold; + + /* Periodic full channel scan in milliseconds unit. + * After full_scan_period_ms since last full scan, channel prediction + * scan is suppressed and will do full scan. + * This is to help detecting sudden AP power-on or -off. Value 0 means no + * full scan at all (not recommended). + */ + __le32 full_scan_period_ms; +} __packed; + +struct enlo_candidate_score_params_t { + __le32 tlv_header; /* TLV tag and len; */ + + /* minimum 5GHz RSSI for a BSSID to be considered (units = dBm) */ + __le32 min_5ghz_rssi; + + /* minimum 2.4GHz RSSI for a BSSID to be considered (units = dBm) */ + __le32 min_24ghz_rssi; + + /* the maximum score that a network can have before bonuses */ + __le32 initial_score_max; + + /* current_connection_bonus: + * only report when there is a network's score this much higher + * than the current connection + */ + __le32 current_connection_bonus; + + /* score bonus for all networks with the same network flag */ + __le32 same_network_bonus; + + /* score bonus for networks that are not open */ + __le32 secure_bonus; + + /* 5GHz RSSI score bonus (applied to all 5GHz networks) */ + __le32 band_5ghz_bonus; +} __packed; + +struct connected_nlo_bss_band_rssi_pref_t { + __le32 tlv_header; /* TLV tag and len;*/ + + /* band which needs to get preference over other band + * - see wmi_set_vdev_ie_band enum + */ + __le32 band; + + /* Amount of RSSI preference (in dB) that can be given to a band */ + __le32 rssi_pref; +} __packed; + +struct connected_nlo_rssi_params_t { + __le32 tlv_header; /* TLV tag and len;*/ + + /* Relative rssi threshold (in dB) by which new BSS should have + * better rssi than the current connected BSS. + */ + __le32 relative_rssi; + + /* The amount of rssi preference (in dB) that can be given + * to a 5G BSS over 2.4G BSS. + */ + __le32 relative_rssi_5g_pref; +} __packed; + +struct wmi_tlv_wow_nlo_config_cmd { + __le32 flags; + __le32 vdev_id; + __le32 fast_scan_max_cycles; + __le32 active_dwell_time; + __le32 passive_dwell_time; /* PDT in msecs */ + __le32 probe_bundle_size; + + /* ART = IRT */ + __le32 rest_time; + + /* Max value that can be reached after SBM */ + __le32 max_rest_time; + + /* SBM */ + __le32 scan_backoff_multiplier; + + /* SCBM */ + __le32 fast_scan_period; + + /* specific to windows */ + __le32 slow_scan_period; + + __le32 no_of_ssids; + + __le32 num_of_channels; + + /* NLO scan start delay time in milliseconds */ + __le32 delay_start_time; + + /** MAC Address to use in Probe Req as SA **/ + struct wmi_mac_addr mac_addr; + + /** Mask on which MAC has to be randomized **/ + struct wmi_mac_addr mac_mask; + + /** IE bitmap to use in Probe Req **/ + __le32 ie_bitmap[8]; + + /** Number of vendor OUIs. In the TLV vendor_oui[] **/ + __le32 num_vendor_oui; + + /** Number of connected NLO band preferences **/ + __le32 num_cnlo_band_pref; + + /* The TLVs will follow. + * nlo_configured_parameters nlo_list[]; + * A_UINT32 channel_list[num_of_channels]; + * nlo_channel_prediction_cfg ch_prediction_cfg; + * enlo_candidate_score_params candidate_score_params; + * wmi_vendor_oui vendor_oui[num_vendor_oui]; + * connected_nlo_rssi_params cnlo_rssi_params; + * connected_nlo_bss_band_rssi_pref cnlo_bss_band_rssi_pref[num_cnlo_band_pref]; + */ +} __packed; + struct wmi_tlv_mgmt_tx_cmd { __le32 vdev_id; __le32 desc_id; |