summaryrefslogtreecommitdiff
path: root/drivers/net/usb/lan78xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/usb/lan78xx.c')
-rw-r--r--drivers/net/usb/lan78xx.c132
1 files changed, 88 insertions, 44 deletions
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 2ed53331bfb2..1c299b8a162d 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -36,7 +36,7 @@
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@microchip.com>"
#define DRIVER_DESC "LAN78XX USB 3.0 Gigabit Ethernet Devices"
#define DRIVER_NAME "lan78xx"
-#define DRIVER_VERSION "1.0.1"
+#define DRIVER_VERSION "1.0.2"
#define TX_TIMEOUT_JIFFIES (5 * HZ)
#define THROTTLE_JIFFIES (HZ / 8)
@@ -462,32 +462,53 @@ static int lan78xx_read_raw_eeprom(struct lan78xx_net *dev, u32 offset,
u32 length, u8 *data)
{
u32 val;
+ u32 saved;
int i, ret;
+ int retval;
- ret = lan78xx_eeprom_confirm_not_busy(dev);
- if (ret)
- return ret;
+ /* depends on chip, some EEPROM pins are muxed with LED function.
+ * disable & restore LED function to access EEPROM.
+ */
+ ret = lan78xx_read_reg(dev, HW_CFG, &val);
+ saved = val;
+ if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) {
+ val &= ~(HW_CFG_LED1_EN_ | HW_CFG_LED0_EN_);
+ ret = lan78xx_write_reg(dev, HW_CFG, val);
+ }
+
+ retval = lan78xx_eeprom_confirm_not_busy(dev);
+ if (retval)
+ return retval;
for (i = 0; i < length; i++) {
val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_READ_;
val |= (offset & E2P_CMD_EPC_ADDR_MASK_);
ret = lan78xx_write_reg(dev, E2P_CMD, val);
- if (unlikely(ret < 0))
- return -EIO;
+ if (unlikely(ret < 0)) {
+ retval = -EIO;
+ goto exit;
+ }
- ret = lan78xx_wait_eeprom(dev);
- if (ret < 0)
- return ret;
+ retval = lan78xx_wait_eeprom(dev);
+ if (retval < 0)
+ goto exit;
ret = lan78xx_read_reg(dev, E2P_DATA, &val);
- if (unlikely(ret < 0))
- return -EIO;
+ if (unlikely(ret < 0)) {
+ retval = -EIO;
+ goto exit;
+ }
data[i] = val & 0xFF;
offset++;
}
- return 0;
+ retval = 0;
+exit:
+ if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000)
+ ret = lan78xx_write_reg(dev, HW_CFG, saved);
+
+ return retval;
}
static int lan78xx_read_eeprom(struct lan78xx_net *dev, u32 offset,
@@ -509,44 +530,67 @@ static int lan78xx_write_raw_eeprom(struct lan78xx_net *dev, u32 offset,
u32 length, u8 *data)
{
u32 val;
+ u32 saved;
int i, ret;
+ int retval;
- ret = lan78xx_eeprom_confirm_not_busy(dev);
- if (ret)
- return ret;
+ /* depends on chip, some EEPROM pins are muxed with LED function.
+ * disable & restore LED function to access EEPROM.
+ */
+ ret = lan78xx_read_reg(dev, HW_CFG, &val);
+ saved = val;
+ if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000) {
+ val &= ~(HW_CFG_LED1_EN_ | HW_CFG_LED0_EN_);
+ ret = lan78xx_write_reg(dev, HW_CFG, val);
+ }
+
+ retval = lan78xx_eeprom_confirm_not_busy(dev);
+ if (retval)
+ goto exit;
/* Issue write/erase enable command */
val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_EWEN_;
ret = lan78xx_write_reg(dev, E2P_CMD, val);
- if (unlikely(ret < 0))
- return -EIO;
+ if (unlikely(ret < 0)) {
+ retval = -EIO;
+ goto exit;
+ }
- ret = lan78xx_wait_eeprom(dev);
- if (ret < 0)
- return ret;
+ retval = lan78xx_wait_eeprom(dev);
+ if (retval < 0)
+ goto exit;
for (i = 0; i < length; i++) {
/* Fill data register */
val = data[i];
ret = lan78xx_write_reg(dev, E2P_DATA, val);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ retval = -EIO;
+ goto exit;
+ }
/* Send "write" command */
val = E2P_CMD_EPC_BUSY_ | E2P_CMD_EPC_CMD_WRITE_;
val |= (offset & E2P_CMD_EPC_ADDR_MASK_);
ret = lan78xx_write_reg(dev, E2P_CMD, val);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ retval = -EIO;
+ goto exit;
+ }
- ret = lan78xx_wait_eeprom(dev);
- if (ret < 0)
- return ret;
+ retval = lan78xx_wait_eeprom(dev);
+ if (retval < 0)
+ goto exit;
offset++;
}
- return 0;
+ retval = 0;
+exit:
+ if ((dev->devid & ID_REV_CHIP_ID_MASK_) == 0x78000000)
+ ret = lan78xx_write_reg(dev, HW_CFG, saved);
+
+ return retval;
}
static int lan78xx_read_raw_otp(struct lan78xx_net *dev, u32 offset,
@@ -904,7 +948,6 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
if (!phydev->link && dev->link_on) {
dev->link_on = false;
- netif_carrier_off(dev->net);
/* reset MAC */
ret = lan78xx_read_reg(dev, MAC_CR, &buf);
@@ -914,6 +957,8 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
ret = lan78xx_write_reg(dev, MAC_CR, buf);
if (unlikely(ret < 0))
return -EIO;
+
+ phy_mac_interrupt(phydev, 0);
} else if (phydev->link && !dev->link_on) {
dev->link_on = true;
@@ -953,7 +998,7 @@ static int lan78xx_link_reset(struct lan78xx_net *dev)
ethtool_cmd_speed(&ecmd), ecmd.duplex, ladv, radv);
ret = lan78xx_update_flowcontrol(dev, ecmd.duplex, ladv, radv);
- netif_carrier_on(dev->net);
+ phy_mac_interrupt(phydev, 1);
}
return ret;
@@ -1495,7 +1540,6 @@ done:
static int lan78xx_mdio_init(struct lan78xx_net *dev)
{
int ret;
- int i;
dev->mdiobus = mdiobus_alloc();
if (!dev->mdiobus) {
@@ -1511,10 +1555,6 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev)
snprintf(dev->mdiobus->id, MII_BUS_ID_SIZE, "usb-%03d:%03d",
dev->udev->bus->busnum, dev->udev->devnum);
- /* handle our own interrupt */
- for (i = 0; i < PHY_MAX_ADDR; i++)
- dev->mdiobus->irq[i] = PHY_IGNORE_INTERRUPT;
-
switch (dev->devid & ID_REV_CHIP_ID_MASK_) {
case 0x78000000:
case 0x78500000:
@@ -1558,6 +1598,16 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
return -EIO;
}
+ /* Enable PHY interrupts.
+ * We handle our own interrupt
+ */
+ ret = phy_read(phydev, LAN88XX_INT_STS);
+ ret = phy_write(phydev, LAN88XX_INT_MASK,
+ LAN88XX_INT_MASK_MDINTPIN_EN_ |
+ LAN88XX_INT_MASK_LINK_CHANGE_);
+
+ phydev->irq = PHY_IGNORE_INTERRUPT;
+
ret = phy_connect_direct(dev->net, phydev,
lan78xx_link_status_change,
PHY_INTERFACE_MODE_GMII);
@@ -1580,14 +1630,6 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
SUPPORTED_Pause | SUPPORTED_Asym_Pause);
genphy_config_aneg(phydev);
- /* Workaround to enable PHY interrupt.
- * phy_start_interrupts() is API for requesting and enabling
- * PHY interrupt. However, USB-to-Ethernet device can't use
- * request_irq() called in phy_start_interrupts().
- * Set PHY to PHY_HALTED and call phy_start()
- * to make a call to phy_enable_interrupts()
- */
- phy_stop(phydev);
phy_start(phydev);
netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
@@ -2221,7 +2263,9 @@ netdev_tx_t lan78xx_start_xmit(struct sk_buff *skb, struct net_device *net)
if (skb2) {
skb_queue_tail(&dev->txq_pend, skb2);
- if (skb_queue_len(&dev->txq_pend) > 10)
+ /* throttle TX patch at slower than SUPER SPEED USB */
+ if ((dev->udev->speed < USB_SPEED_SUPER) &&
+ (skb_queue_len(&dev->txq_pend) > 10))
netif_stop_queue(net);
} else {
netif_dbg(dev, tx_err, dev->net,
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-11-22 11:24:57 +0000