diff options
Diffstat (limited to 'drivers/net/skge.c')
| -rw-r--r-- | drivers/net/skge.c | 1710 |
1 files changed, 829 insertions, 881 deletions
diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 30e8d589d167..3dbb1cb09ed8 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -7,7 +7,7 @@ * of the original driver such as link fail-over and link management because * those should be done at higher levels. * - * Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org> + * Copyright (C) 2004, 2005 Stephen Hemminger <shemminger@osdl.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -42,19 +42,20 @@ #include "skge.h" #define DRV_NAME "skge" -#define DRV_VERSION "0.6" +#define DRV_VERSION "0.7" #define PFX DRV_NAME " " #define DEFAULT_TX_RING_SIZE 128 #define DEFAULT_RX_RING_SIZE 512 #define MAX_TX_RING_SIZE 1024 #define MAX_RX_RING_SIZE 4096 +#define RX_COPY_THRESHOLD 128 +#define RX_BUF_SIZE 1536 #define PHY_RETRIES 1000 #define ETH_JUMBO_MTU 9000 #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 #define BLINK_HZ (HZ/4) -#define LINK_POLL_HZ (HZ/10) MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver"); MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>"); @@ -70,28 +71,17 @@ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); static const struct pci_device_id skge_id_table[] = { - { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_SYSKONNECT, 0x9E00, /* SK-9Exx */ - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_MARVELL, 0x4320, /* Gigabit Ethernet Controller */ - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_MARVELL, 0x5005, /* Marvell (11ab), Belkin */ - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032, - PCI_ANY_ID, PCI_ANY_ID }, - { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064, - PCI_ANY_ID, PCI_ANY_ID }, + { PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940) }, + { PCI_DEVICE(PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B) }, + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE) }, + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU) }, + { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T), }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */ + { PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) }, + { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032) }, + { PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064) }, { 0 } }; MODULE_DEVICE_TABLE(pci, skge_id_table); @@ -99,19 +89,22 @@ MODULE_DEVICE_TABLE(pci, skge_id_table); static int skge_up(struct net_device *dev); static int skge_down(struct net_device *dev); static void skge_tx_clean(struct skge_port *skge); -static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); -static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); +static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); +static void gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); static void genesis_get_stats(struct skge_port *skge, u64 *data); static void yukon_get_stats(struct skge_port *skge, u64 *data); static void yukon_init(struct skge_hw *hw, int port); static void yukon_reset(struct skge_hw *hw, int port); static void genesis_mac_init(struct skge_hw *hw, int port); static void genesis_reset(struct skge_hw *hw, int port); +static void genesis_link_up(struct skge_port *skge); +/* Avoid conditionals by using array */ static const int txqaddr[] = { Q_XA1, Q_XA2 }; static const int rxqaddr[] = { Q_R1, Q_R2 }; static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F }; static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F }; +static const u32 portirqmask[] = { IS_PORT_1, IS_PORT_2 }; /* Don't need to look at whole 16K. * last interesting register is descriptor poll timer. @@ -154,7 +147,7 @@ static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs, static int wol_supported(const struct skge_hw *hw) { return !((hw->chip_id == CHIP_ID_GENESIS || - (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0))); + (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0))); } static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) @@ -170,7 +163,7 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) struct skge_port *skge = netdev_priv(dev); struct skge_hw *hw = skge->hw; - if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) + if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) return -EOPNOTSUPP; if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw)) @@ -190,6 +183,36 @@ static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) return 0; } +/* Determine supported/adverised modes based on hardware. + * Note: ethtoool ADVERTISED_xxx == SUPPORTED_xxx + */ +static u32 skge_supported_modes(const struct skge_hw *hw) +{ + u32 supported; + + if (iscopper(hw)) { + supported = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg| SUPPORTED_TP; + + if (hw->chip_id == CHIP_ID_GENESIS) + supported &= ~(SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full); + + else if (hw->chip_id == CHIP_ID_YUKON) + supported &= ~SUPPORTED_1000baseT_Half; + } else + supported = SUPPORTED_1000baseT_Full | SUPPORTED_FIBRE + | SUPPORTED_Autoneg; + + return supported; +} static int skge_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) @@ -198,38 +221,13 @@ static int skge_get_settings(struct net_device *dev, struct skge_hw *hw = skge->hw; ecmd->transceiver = XCVR_INTERNAL; + ecmd->supported = skge_supported_modes(hw); if (iscopper(hw)) { - if (hw->chip_id == CHIP_ID_GENESIS) - ecmd->supported = SUPPORTED_1000baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_Autoneg | SUPPORTED_TP; - else { - ecmd->supported = SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full - | SUPPORTED_Autoneg| SUPPORTED_TP; - - if (hw->chip_id == CHIP_ID_YUKON) - ecmd->supported &= ~SUPPORTED_1000baseT_Half; - - else if (hw->chip_id == CHIP_ID_YUKON_FE) - ecmd->supported &= ~(SUPPORTED_1000baseT_Half - | SUPPORTED_1000baseT_Full); - } - ecmd->port = PORT_TP; ecmd->phy_address = hw->phy_addr; - } else { - ecmd->supported = SUPPORTED_1000baseT_Full - | SUPPORTED_FIBRE - | SUPPORTED_Autoneg; - + } else ecmd->port = PORT_FIBRE; - } ecmd->advertising = skge->advertising; ecmd->autoneg = skge->autoneg; @@ -238,65 +236,57 @@ static int skge_get_settings(struct net_device *dev, return 0; } -static u32 skge_modes(const struct skge_hw *hw) -{ - u32 modes = ADVERTISED_Autoneg - | ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half - | ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half - | ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half; - - if (iscopper(hw)) { - modes |= ADVERTISED_TP; - switch(hw->chip_id) { - case CHIP_ID_GENESIS: - modes &= ~(ADVERTISED_100baseT_Full - | ADVERTISED_100baseT_Half - | ADVERTISED_10baseT_Full - | ADVERTISED_10baseT_Half); - break; - - case CHIP_ID_YUKON: - modes &= ~ADVERTISED_1000baseT_Half; - break; - - case CHIP_ID_YUKON_FE: - modes &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); - break; - } - } else { - modes |= ADVERTISED_FIBRE; - modes &= ~ADVERTISED_1000baseT_Half; - } - return modes; -} - static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) { struct skge_port *skge = netdev_priv(dev); const struct skge_hw *hw = skge->hw; + u32 supported = skge_supported_modes(hw); if (ecmd->autoneg == AUTONEG_ENABLE) { - if (ecmd->advertising & skge_modes(hw)) - return -EINVAL; + ecmd->advertising = supported; + skge->duplex = -1; + skge->speed = -1; } else { + u32 setting; + switch(ecmd->speed) { case SPEED_1000: - if (hw->chip_id == CHIP_ID_YUKON_FE) + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_1000baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_1000baseT_Half; + else return -EINVAL; break; case SPEED_100: + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_100baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_100baseT_Half; + else + return -EINVAL; + break; + case SPEED_10: - if (iscopper(hw) || hw->chip_id == CHIP_ID_GENESIS) + if (ecmd->duplex == DUPLEX_FULL) + setting = SUPPORTED_10baseT_Full; + else if (ecmd->duplex == DUPLEX_HALF) + setting = SUPPORTED_10baseT_Half; + else return -EINVAL; break; default: return -EINVAL; } + + if ((setting & supported) == 0) + return -EINVAL; + + skge->speed = ecmd->speed; + skge->duplex = ecmd->duplex; } skge->autoneg = ecmd->autoneg; - skge->speed = ecmd->speed; - skge->duplex = ecmd->duplex; skge->advertising = ecmd->advertising; if (netif_running(dev)) { @@ -393,7 +383,7 @@ static void skge_get_strings(struct net_device *dev, u32 stringset, u8 *data) { int i; - switch(stringset) { + switch (stringset) { case ETH_SS_STATS: for (i = 0; i < ARRAY_SIZE(skge_stats); i++) memcpy(data + i * ETH_GSTRING_LEN, @@ -511,14 +501,6 @@ static int skge_set_rx_csum(struct net_device *dev, u32 data) return 0; } -/* Only Yukon II supports TSO (not implemented yet) */ -static int skge_set_tso(struct net_device *dev, u32 data) -{ - if (data) - return -EOPNOTSUPP; - return 0; -} - static void skge_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *ecmd) { @@ -540,9 +522,9 @@ static int skge_set_pauseparam(struct net_device *dev, skge->autoneg = ecmd->autoneg; if (ecmd->rx_pause && ecmd->tx_pause) skge->flow_control = FLOW_MODE_SYMMETRIC; - else if(ecmd->rx_pause && !ecmd->tx_pause) + else if (ecmd->rx_pause && !ecmd->tx_pause) skge->flow_control = FLOW_MODE_REM_SEND; - else if(!ecmd->rx_pause && ecmd->tx_pause) + else if (!ecmd->rx_pause && ecmd->tx_pause) skge->flow_control = FLOW_MODE_LOC_SEND; else skge->flow_control = FLOW_MODE_NONE; @@ -559,8 +541,6 @@ static inline u32 hwkhz(const struct skge_hw *hw) { if (hw->chip_id == CHIP_ID_GENESIS) return 53215; /* or: 53.125 MHz */ - else if (hw->chip_id == CHIP_ID_YUKON_EC) - return 125000; /* or: 125.000 MHz */ else return 78215; /* or: 78.125 MHz */ } @@ -643,30 +623,18 @@ static int skge_set_coalesce(struct net_device *dev, static void skge_led_on(struct skge_hw *hw, int port) { if (hw->chip_id == CHIP_ID_GENESIS) { - skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON); + skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON); skge_write8(hw, B0_LED, LED_STAT_ON); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_TST), LED_T_ON); - skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 100); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START); + skge_write8(hw, SK_REG(port, RX_LED_TST), LED_T_ON); + skge_write32(hw, SK_REG(port, RX_LED_VAL), 100); + skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START); - switch (hw->phy_type) { - case SK_PHY_BCOM: - skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, - PHY_B_PEC_LED_ON); - break; - case SK_PHY_LONE: - skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG, - 0x0800); - break; - default: - skge_write8(hw, SKGEMAC_REG(port, TX_LED_TST), LED_T_ON); - skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 100); - skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START); - } + /* For Broadcom Phy only */ + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_ON); } else { - skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); - skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, PHY_M_LED_MO_DUP(MO_LED_ON) | PHY_M_LED_MO_10(MO_LED_ON) | PHY_M_LED_MO_100(MO_LED_ON) | @@ -678,28 +646,17 @@ static void skge_led_on(struct skge_hw *hw, int port) static void skge_led_off(struct skge_hw *hw, int port) { if (hw->chip_id == CHIP_ID_GENESIS) { - skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_OFF); + skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_OFF); skge_write8(hw, B0_LED, LED_STAT_OFF); - skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 0); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_T_OFF); + skge_write32(hw, SK_REG(port, RX_LED_VAL), 0); + skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_T_OFF); - switch (hw->phy_type) { - case SK_PHY_BCOM: - skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, - PHY_B_PEC_LED_OFF); - break; - case SK_PHY_LONE: - skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG, - PHY_L_LC_LEDT); - break; - default: - skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 0); - skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_T_OFF); - } + /* Broadcom only */ + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, PHY_B_PEC_LED_OFF); } else { - skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); - skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, PHY_M_LED_MO_DUP(MO_LED_OFF) | PHY_M_LED_MO_10(MO_LED_OFF) | PHY_M_LED_MO_100(MO_LED_OFF) | @@ -730,7 +687,7 @@ static int skge_phys_id(struct net_device *dev, u32 data) { struct skge_port *skge = netdev_priv(dev); - if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); /* start blinking */ @@ -763,8 +720,6 @@ static struct ethtool_ops skge_ethtool_ops = { .set_pauseparam = skge_set_pauseparam, .get_coalesce = skge_get_coalesce, .set_coalesce = skge_set_coalesce, - .get_tso = ethtool_op_get_tso, - .set_tso = skge_set_tso, .get_sg = ethtool_op_get_sg, .set_sg = skge_set_sg, .get_tx_csum = ethtool_op_get_tx_csum, @@ -793,6 +748,7 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base) for (i = 0, e = ring->start, d = vaddr; i < ring->count; i++, e++, d++) { e->desc = d; + e->skb = NULL; if (i == ring->count - 1) { e->next = ring->start; d->next_offset = base; @@ -806,24 +762,23 @@ static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base) return 0; } -/* Setup buffer for receiving */ -static inline int skge_rx_alloc(struct skge_port *skge, - struct skge_element *e) +static struct sk_buff *skge_rx_alloc(struct net_device *dev, unsigned int size) { - unsigned long bufsize = skge->netdev->mtu + ETH_HLEN; /* VLAN? */ - struct skge_rx_desc *rd = e->desc; - struct sk_buff *skb; - u64 map; + struct sk_buff *skb = dev_alloc_skb(size); - skb = dev_alloc_skb(bufsize + NET_IP_ALIGN); - if (unlikely(!skb)) { - printk(KERN_DEBUG PFX "%s: out of memory for receive\n", - skge->netdev->name); - return -ENOMEM; + if (likely(skb)) { + skb->dev = dev; + skb_reserve(skb, NET_IP_ALIGN); } + return skb; +} - skb->dev = skge->netdev; - skb_reserve(skb, NET_IP_ALIGN); +/* Allocate and setup a new buffer for receiving */ +static void skge_rx_setup(struct skge_port *skge, struct skge_element *e, + struct sk_buff *skb, unsigned int bufsize) +{ + struct skge_rx_desc *rd = e->desc; + u64 map; map = pci_map_single(skge->hw->pdev, skb->data, bufsize, PCI_DMA_FROMDEVICE); @@ -841,55 +796,69 @@ static inline int skge_rx_alloc(struct skge_port *skge, rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize; pci_unmap_addr_set(e, mapaddr, map); pci_unmap_len_set(e, maplen, bufsize); - return 0; } -/* Free all unused buffers in receive ring, assumes receiver stopped */ +/* Resume receiving using existing skb, + * Note: DMA address is not changed by chip. + * MTU not changed while receiver active. + */ +static void skge_rx_reuse(struct skge_element *e, unsigned int size) +{ + struct skge_rx_desc *rd = e->desc; + + rd->csum2 = 0; + rd->csum2_start = ETH_HLEN; + + wmb(); + + rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | size; +} + + +/* Free all buffers in receive ring, assumes receiver stopped */ static void skge_rx_clean(struct skge_port *skge) { struct skge_hw *hw = skge->hw; struct skge_ring *ring = &skge->rx_ring; struct skge_element *e; - for (e = ring->to_clean; e != ring->to_use; e = e->next) { + e = ring->start; + do { struct skge_rx_desc *rd = e->desc; rd->control = 0; - - pci_unmap_single(hw->pdev, - pci_unmap_addr(e, mapaddr), - pci_unmap_len(e, maplen), - PCI_DMA_FROMDEVICE); - dev_kfree_skb(e->skb); - e->skb = NULL; - } - ring->to_clean = e; + if (e->skb) { + pci_unmap_single(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(e->skb); + e->skb = NULL; + } + } while ((e = e->next) != ring->start); } + /* Allocate buffers for receive ring - * For receive: to_use is refill location - * to_clean is next received frame. - * - * if (to_use == to_clean) - * then ring all frames in ring need buffers - * if (to_use->next == to_clean) - * then ring all frames in ring have buffers + * For receive: to_clean is next received frame. */ static int skge_rx_fill(struct skge_port *skge) { struct skge_ring *ring = &skge->rx_ring; struct skge_element *e; - int ret = 0; + unsigned int bufsize = skge->rx_buf_size; - for (e = ring->to_use; e->next != ring->to_clean; e = e->next) { - if (skge_rx_alloc(skge, e)) { - ret = 1; - break; - } + e = ring->start; + do { + struct sk_buff *skb = skge_rx_alloc(skge->netdev, bufsize); - } - ring->to_use = e; + if (!skb) + return -ENOMEM; + + skge_rx_setup(skge, e, skb, bufsize); + } while ( (e = e->next) != ring->start); - return ret; + ring->to_clean = ring->start; + return 0; } static void skge_link_up(struct skge_port *skge) @@ -919,50 +888,50 @@ static void skge_link_down(struct skge_port *skge) printk(KERN_INFO PFX "%s: Link is down.\n", skge->netdev->name); } -static u16 skge_xm_phy_read(struct skge_hw *hw, int port, u16 reg) +static u16 xm_phy_read(struct skge_hw *hw, int port, u16 reg) { int i; u16 v; - skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); - v = skge_xm_read16(hw, port, XM_PHY_DATA); - if (hw->phy_type != SK_PHY_XMAC) { - for (i = 0; i < PHY_RETRIES; i++) { - udelay(1); - if (skge_xm_read16(hw, port, XM_MMU_CMD) - & XM_MMU_PHY_RDY) - goto ready; - } + xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); + v = xm_read16(hw, port, XM_PHY_DATA); - printk(KERN_WARNING PFX "%s: phy read timed out\n", - hw->dev[port]->name); - return 0; - ready: - v = skge_xm_read16(hw, port, XM_PHY_DATA); + /* Need to wait for external PHY */ + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (xm_read16(hw, port, XM_MMU_CMD) + & XM_MMU_PHY_RDY) + goto ready; } + printk(KERN_WARNING PFX "%s: phy read timed out\n", + hw->dev[port]->name); + return 0; + ready: + v = xm_read16(hw, port, XM_PHY_DATA); + return v; } -static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) +static void xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) { int i; - skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); + xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); for (i = 0; i < PHY_RETRIES; i++) { - if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) goto ready; - cpu_relax(); + udelay(1); } printk(KERN_WARNING PFX "%s: phy write failed to come ready\n", hw->dev[port]->name); ready: - skge_xm_write16(hw, port, XM_PHY_DATA, val); + xm_write16(hw, port, XM_PHY_DATA, val); for (i = 0; i < PHY_RETRIES; i++) { udelay(1); - if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + if (!(xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) return; } printk(KERN_WARNING PFX "%s: phy write timed out\n", @@ -999,34 +968,112 @@ static void genesis_init(struct skge_hw *hw) static void genesis_reset(struct skge_hw *hw, int port) { - int i; - u64 zero = 0; + const u8 zero[8] = { 0 }; /* reset the statistics module */ - skge_xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT); - skge_xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */ - skge_xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */ - skge_xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */ - skge_xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */ + xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT); + xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */ + xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */ + xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */ + xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */ - /* disable all PHY IRQs */ - if (hw->phy_type == SK_PHY_BCOM) - skge_xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); + /* disable Broadcom PHY IRQ */ + xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); - skge_xm_outhash(hw, port, XM_HSM, (u8 *) &zero); - for (i = 0; i < 15; i++) - skge_xm_outaddr(hw, port, XM_EXM(i), (u8 *) &zero); - skge_xm_outhash(hw, port, XM_SRC_CHK, (u8 *) &zero); + xm_outhash(hw, port, XM_HSM, zero); } -static void genesis_mac_init(struct skge_hw *hw, int port) +/* Convert mode to MII values */ +static const u16 phy_pause_map[] = { + [FLOW_MODE_NONE] = 0, + [FLOW_MODE_LOC_SEND] = PHY_AN_PAUSE_ASYM, + [FLOW_MODE_SYMMETRIC] = PHY_AN_PAUSE_CAP, + [FLOW_MODE_REM_SEND] = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM, +}; + + +/* Check status of Broadcom phy link */ +static void bcom_check_link(struct skge_hw *hw, int port) { - struct skge_port *skge = netdev_priv(hw->dev[port]); + struct net_device *dev = hw->dev[port]; + struct skge_port *skge = netdev_priv(dev); + u16 status; + + /* read twice because of latch */ + (void) xm_phy_read(hw, port, PHY_BCOM_STAT); + status = xm_phy_read(hw, port, PHY_BCOM_STAT); + + pr_debug("bcom_check_link status=0x%x\n", status); + + if ((status & PHY_ST_LSYNC) == 0) { + u16 cmd = xm_read16(hw, port, XM_MMU_CMD); + cmd &= ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX); + xm_write16(hw, port, XM_MMU_CMD, cmd); + /* dummy read to ensure writing */ + (void) xm_read16(hw, port, XM_MMU_CMD); + + if (netif_carrier_ok(dev)) + skge_link_down(skge); + } else { + if (skge->autoneg == AUTONEG_ENABLE && + (status & PHY_ST_AN_OVER)) { + u16 lpa = xm_phy_read(hw, port, PHY_BCOM_AUNE_LP); + u16 aux = xm_phy_read(hw, port, PHY_BCOM_AUX_STAT); + + if (lpa & PHY_B_AN_RF) { + printk(KERN_NOTICE PFX "%s: remote fault\n", + dev->name); + return; + } + + /* Check Duplex mismatch */ + switch(aux & PHY_B_AS_AN_RES_MSK) { + case PHY_B_RES_1000FD: + skge->duplex = DUPLEX_FULL; + break; + case PHY_B_RES_1000HD: + skge->duplex = DUPLEX_HALF; + break; + default: + printk(KERN_NOTICE PFX "%s: duplex mismatch\n", + dev->name); + return; + } + + + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + switch (aux & PHY_B_AS_PAUSE_MSK) { + case PHY_B_AS_PAUSE_MSK: + skge->flow_control = FLOW_MODE_SYMMETRIC; + break; + case PHY_B_AS_PRR: + skge->flow_control = FLOW_MODE_REM_SEND; + break; + case PHY_B_AS_PRT: + skge->flow_control = FLOW_MODE_LOC_SEND; + break; + default: + skge->flow_control = FLOW_MODE_NONE; + } + + skge->speed = SPEED_1000; + } + + if (!netif_carrier_ok(dev)) + genesis_link_up(skge); + } +} + +/* Broadcom 5400 only supports giagabit! SysKonnect did not put an additional + * Phy on for 100 or 10Mbit operation + */ +static void bcom_phy_init(struct skge_port *skge, int jumbo) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; int i; - u32 r; - u16 id1; - u16 ctrl1, ctrl2, ctrl3, ctrl4, ctrl5; + u16 id1, r, ext, ctl; /* magic workaround patterns for Broadcom */ static const struct { @@ -1042,16 +1089,120 @@ static void genesis_mac_init(struct skge_hw *hw, int port) { 0x17, 0x0013 }, { 0x15, 0x0A04 }, { 0x18, 0x0420 }, }; + pr_debug("bcom_phy_init\n"); + + /* read Id from external PHY (all have the same address) */ + id1 = xm_phy_read(hw, port, PHY_XMAC_ID1); + + /* Optimize MDIO transfer by suppressing preamble. */ + r = xm_read16(hw, port, XM_MMU_CMD); + r |= XM_MMU_NO_PRE; + xm_write16(hw, port, XM_MMU_CMD,r); + + switch(id1) { + case PHY_BCOM_ID1_C0: + /* + * Workaround BCOM Errata for the C0 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(C0hack); i++) + xm_phy_write(hw, port, + C0hack[i].reg, C0hack[i].val); + + break; + case PHY_BCOM_ID1_A1: + /* + * Workaround BCOM Errata for the A1 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(A1hack); i++) + xm_phy_write(hw, port, + A1hack[i].reg, A1hack[i].val); + break; + } + + /* + * Workaround BCOM Errata (#10523) for all BCom PHYs. + * Disable Power Management after reset. + */ + r = xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL); + r |= PHY_B_AC_DIS_PM; + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r); + + /* Dummy read */ + xm_read16(hw, port, XM_ISRC); + + ext = PHY_B_PEC_EN_LTR; /* enable tx led */ + ctl = PHY_CT_SP1000; /* always 1000mbit */ + + if (skge->autoneg == AUTONEG_ENABLE) { + /* + * Workaround BCOM Errata #1 for the C5 type. + * 1000Base-T Link Acquisition Failure in Slave Mode + * Set Repeater/DTE bit 10 of the 1000Base-T Control Register + */ + u16 adv = PHY_B_1000C_RD; + if (skge->advertising & ADVERTISED_1000baseT_Half) + adv |= PHY_B_1000C_AHD; + if (skge->advertising & ADVERTISED_1000baseT_Full) + adv |= PHY_B_1000C_AFD; + xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, adv); + + ctl |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + if (skge->duplex == DUPLEX_FULL) + ctl |= PHY_CT_DUP_MD; + /* Force to slave */ + xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, PHY_B_1000C_MSE); + } + + /* Set autonegotiation pause parameters */ + xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, + phy_pause_map[skge->flow_control] | PHY_AN_CSMA); + + /* Handle Jumbo frames */ + if (jumbo) { + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, + PHY_B_AC_TX_TST | PHY_B_AC_LONG_PACK); + + ext |= PHY_B_PEC_HIGH_LA; + + } + + xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ext); + xm_phy_write(hw, port, PHY_BCOM_CTRL, ctl); + + /* Use link status change interrrupt */ + xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK); + + bcom_check_link(hw, port); +} + +static void genesis_mac_init(struct skge_hw *hw, int port) +{ + struct net_device *dev = hw->dev[port]; + struct skge_port *skge = netdev_priv(dev); + int jumbo = hw->dev[port]->mtu > ETH_DATA_LEN; + int i; + u32 r; + const u8 zero[6] = { 0 }; + + /* Clear MIB counters */ + xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); + /* Clear two times according to Errata #3 */ + xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); /* initialize Rx, Tx and Link LED */ - skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON); - skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON); + skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON); + skge_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START); - skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START); + skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_START); + skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_START); /* Unreset the XMAC. */ - skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); /* * Perform additional initialization for external PHYs, @@ -1059,67 +1210,56 @@ static void genesis_mac_init(struct skge_hw *hw, int port) * GMII mode. */ spin_lock_bh(&hw->phy_lock); - if (hw->phy_type != SK_PHY_XMAC) { - /* Take PHY out of reset. */ - r = skge_read32(hw, B2_GP_IO); - if (port == 0) - r |= GP_DIR_0|GP_IO_0; - else - r |= GP_DIR_2|GP_IO_2; - - skge_write32(hw, B2_GP_IO, r); - skge_read32(hw, B2_GP_IO); - - /* Enable GMII mode on the XMAC. */ - skge_xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); - - id1 = skge_xm_phy_read(hw, port, PHY_XMAC_ID1); - - /* Optimize MDIO transfer by suppressing preamble. */ - skge_xm_write16(hw, port, XM_MMU_CMD, - skge_xm_read16(hw, port, XM_MMU_CMD) - | XM_MMU_NO_PRE); - - if (id1 == PHY_BCOM_ID1_C0) { - /* - * Workaround BCOM Errata for the C0 type. - * Write magic patterns to reserved registers. - */ - for (i = 0; i < ARRAY_SIZE(C0hack); i++) - skge_xm_phy_write(hw, port, - C0hack[i].reg, C0hack[i].val); - - } else if (id1 == PHY_BCOM_ID1_A1) { - /* - * Workaround BCOM Errata for the A1 type. - * Write magic patterns to reserved registers. - */ - for (i = 0; i < ARRAY_SIZE(A1hack); i++) - skge_xm_phy_write(hw, port, - A1hack[i].reg, A1hack[i].val); - } + /* Take external Phy out of reset */ + r = skge_read32(hw, B2_GP_IO); + if (port == 0) + r |= GP_DIR_0|GP_IO_0; + else + r |= GP_DIR_2|GP_IO_2; - /* - * Workaround BCOM Errata (#10523) for all BCom PHYs. - * Disable Power Management after reset. - */ - r = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL); - skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM); - } + skge_write32(hw, B2_GP_IO, r); + skge_read32(hw, B2_GP_IO); + spin_unlock_bh(&hw->phy_lock); - /* Dummy read */ - skge_xm_read16(hw, port, XM_ISRC); + /* Enable GMII interfac */ + xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); + + bcom_phy_init(skge, jumbo); + + /* Set Station Address */ + xm_outaddr(hw, port, XM_SA, dev->dev_addr); + + /* We don't use match addresses so clear */ + for (i = 1; i < 16; i++) + xm_outaddr(hw, port, XM_EXM(i), zero); - r = skge_xm_read32(hw, port, XM_MODE); - skge_xm_write32(hw, port, XM_MODE, r|XM_MD_CSA); + /* configure Rx High Water Mark (XM_RX_HI_WM) */ + xm_write16(hw, port, XM_RX_HI_WM, 1450); /* We don't need the FCS appended to the packet. */ - r = skge_xm_read16(hw, port, XM_RX_CMD); - skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_STRIP_FCS); + r = XM_RX_LENERR_OK | XM_RX_STRIP_FCS; + if (jumbo) + r |= XM_RX_BIG_PK_OK; + + if (skge->duplex == DUPLEX_HALF) { + /* + * If in manual half duplex mode the other side might be in + * full duplex mode, so ignore if a carrier extension is not seen + * on frames received + */ + r |= XM_RX_DIS_CEXT; + } + xm_write16(hw, port, XM_RX_CMD, r); + /* We want short frames padded to 60 bytes. */ - r = skge_xm_read16(hw, port, XM_TX_CMD); - skge_xm_write16(hw, port, XM_TX_CMD, r | XM_TX_AUTO_PAD); + xm_write16(hw, port, XM_TX_CMD, XM_TX_AUTO_PAD); + + /* + * Bump up the transmit threshold. This helps hold off transmit + * underruns when we're blasting traffic from both ports at once. + */ + xm_write16(hw, port, XM_TX_THR, 512); /* * Enable the reception of all error frames. This is is @@ -1135,19 +1275,22 @@ static void genesis_mac_init(struct skge_hw *hw, int port) * case the XMAC will start transfering frames out of the * RX FIFO as soon as the FIFO threshold is reached. */ - r = skge_xm_read32(hw, port, XM_MODE); - skge_xm_write32(hw, port, XM_MODE, - XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT| - XM_MD_RX_ERR|XM_MD_RX_IRLE); + xm_write32(hw, port, XM_MODE, XM_DEF_MODE); - skge_xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr); - skge_xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr); /* - * Bump up the transmit threshold. This helps hold off transmit - * underruns when we're blasting traffic from both ports at once. + * Initialize the Receive Counter Event Mask (XM_RX_EV_MSK) + * - Enable all bits excepting 'Octets Rx OK Low CntOv' + * and 'Octets Rx OK Hi Cnt Ov'. */ - skge_xm_write16(hw, port, XM_TX_THR, 512); + xm_write32(hw, port, XM_RX_EV_MSK, XMR_DEF_MSK); + + /* + * Initialize the Transmit Counter Event Mask (XM_TX_EV_MSK) + * - Enable all bits excepting 'Octets Tx OK Low CntOv' + * and 'Octets Tx OK Hi Cnt Ov'. + */ + xm_write32(hw, port, XM_TX_EV_MSK, XMT_DEF_MSK); /* Configure MAC arbiter */ skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR); @@ -1164,137 +1307,30 @@ static void genesis_mac_init(struct skge_hw *hw, int port) skge_write8(hw, B3_MA_RCINI_TX2, 0); /* Configure Rx MAC FIFO */ - skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_CLR); - skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT); - skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD); + skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_CLR); + skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT); + skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD); /* Configure Tx MAC FIFO */ - skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_CLR); - skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); - skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD); + skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_CLR); + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); + skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD); - if (hw->dev[port]->mtu > ETH_DATA_LEN) { + if (jumbo) { /* Enable frame flushing if jumbo frames used */ - skge_write16(hw, SKGEMAC_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH); + skge_write16(hw, SK_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH); } else { /* enable timeout timers if normal frames */ skge_write16(hw, B3_PA_CTRL, - port == 0 ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2); + (port == 0) ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2); } - - - r = skge_xm_read16(hw, port, XM_RX_CMD); - if (hw->dev[port]->mtu > ETH_DATA_LEN) - skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_BIG_PK_OK); - else - skge_xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK)); - - switch (hw->phy_type) { - case SK_PHY_XMAC: - if (skge->autoneg == AUTONEG_ENABLE) { - ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD; - - switch (skge->flow_control) { - case FLOW_MODE_NONE: - ctrl1 |= PHY_X_P_NO_PAUSE; - break; - case FLOW_MODE_LOC_SEND: - ctrl1 |= PHY_X_P_ASYM_MD; - break; - case FLOW_MODE_SYMMETRIC: - ctrl1 |= PHY_X_P_SYM_MD; - break; - case FLOW_MODE_REM_SEND: - ctrl1 |= PHY_X_P_BOTH_MD; - break; - } - - skge_xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1); - ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG; - } else { - ctrl2 = 0; - if (skge->duplex == DUPLEX_FULL) - ctrl2 |= PHY_CT_DUP_MD; - } - - skge_xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2); - break; - - case SK_PHY_BCOM: - ctrl1 = PHY_CT_SP1000; - ctrl2 = 0; - ctrl3 = PHY_SEL_TYPE; - ctrl4 = PHY_B_PEC_EN_LTR; - ctrl5 = PHY_B_AC_TX_TST; - - if (skge->autoneg == AUTONEG_ENABLE) { - /* - * Workaround BCOM Errata #1 for the C5 type. - * 1000Base-T Link Acquisition Failure in Slave Mode - * Set Repeater/DTE bit 10 of the 1000Base-T Control Register - */ - ctrl2 |= PHY_B_1000C_RD; - if (skge->advertising & ADVERTISED_1000baseT_Half) - ctrl2 |= PHY_B_1000C_AHD; - if (skge->advertising & ADVERTISED_1000baseT_Full) - ctrl2 |= PHY_B_1000C_AFD; - - /* Set Flow-control capabilities */ - switch (skge->flow_control) { - case FLOW_MODE_NONE: - ctrl3 |= PHY_B_P_NO_PAUSE; - break; - case FLOW_MODE_LOC_SEND: - ctrl3 |= PHY_B_P_ASYM_MD; - break; - case FLOW_MODE_SYMMETRIC: - ctrl3 |= PHY_B_P_SYM_MD; - break; - case FLOW_MODE_REM_SEND: - ctrl3 |= PHY_B_P_BOTH_MD; - break; - } - - /* Restart Auto-negotiation */ - ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; - } else { - if (skge->duplex == DUPLEX_FULL) - ctrl1 |= PHY_CT_DUP_MD; - - ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ - } - - skge_xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2); - skge_xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3); - - if (skge->netdev->mtu > ETH_DATA_LEN) { - ctrl4 |= PHY_B_PEC_HIGH_LA; - ctrl5 |= PHY_B_AC_LONG_PACK; - - skge_xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5); - } - - skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4); - skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1); - break; - } - spin_unlock_bh(&hw->phy_lock); - - /* Clear MIB counters */ - skge_xm_write16(hw, port, XM_STAT_CMD, - XM_SC_CLR_RXC | XM_SC_CLR_TXC); - /* Clear two times according to Errata #3 */ - skge_xm_write16(hw, port, XM_STAT_CMD, - XM_SC_CLR_RXC | XM_SC_CLR_TXC); - - /* Start polling for link status */ - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); } static void genesis_stop(struct skge_port *skge) { struct skge_hw *hw = skge->hw; int port = skge->port; + u32 reg; /* Clear Tx packet arbiter timeout IRQ */ skge_write16(hw, B3_PA_CTRL, @@ -1304,33 +1340,30 @@ static void genesis_stop(struct skge_port *skge) * If the transfer stucks at the MAC the STOP command will not * terminate if we don't flush the XMAC's transmit FIFO ! */ - skge_xm_write32(hw, port, XM_MODE, - skge_xm_read32(hw, port, XM_MODE)|XM_MD_FTF); + xm_write32(hw, port, XM_MODE, + xm_read32(hw, port, XM_MODE)|XM_MD_FTF); /* Reset the MAC */ - skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST); + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST); /* For external PHYs there must be special handling */ - if (hw->phy_type != SK_PHY_XMAC) { - u32 reg = skge_read32(hw, B2_GP_IO); - - if (port == 0) { - reg |= GP_DIR_0; - reg &= ~GP_IO_0; - } else { - reg |= GP_DIR_2; - reg &= ~GP_IO_2; - } - skge_write32(hw, B2_GP_IO, reg); - skge_read32(hw, B2_GP_IO); + reg = skge_read32(hw, B2_GP_IO); + if (port == 0) { + reg |= GP_DIR_0; + reg &= ~GP_IO_0; + } else { + reg |= GP_DIR_2; + reg &= ~GP_IO_2; } + skge_write32(hw, B2_GP_IO, reg); + skge_read32(hw, B2_GP_IO); - skge_xm_write16(hw, port, XM_MMU_CMD, - skge_xm_read16(hw, port, XM_MMU_CMD) + xm_write16(hw, port, XM_MMU_CMD, + xm_read16(hw, port, XM_MMU_CMD) & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); - skge_xm_read16(hw, port, XM_MMU_CMD); + xm_read16(hw, port, XM_MMU_CMD); } @@ -1341,11 +1374,11 @@ static void genesis_get_stats(struct skge_port *skge, u64 *data) int i; unsigned long timeout = jiffies + HZ; - skge_xm_write16(hw, port, + xm_write16(hw, port, XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC); /* wait for update to complete */ - while (skge_xm_read16(hw, port, XM_STAT_CMD) + while (xm_read16(hw, port, XM_STAT_CMD) & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) { if (time_after(jiffies, timeout)) break; @@ -1353,68 +1386,60 @@ static void genesis_get_stats(struct skge_port *skge, u64 *data) } /* special case for 64 bit octet counter */ - data[0] = (u64) skge_xm_read32(hw, port, XM_TXO_OK_HI) << 32 - | skge_xm_read32(hw, port, XM_TXO_OK_LO); - data[1] = (u64) skge_xm_read32(hw, port, XM_RXO_OK_HI) << 32 - | skge_xm_read32(hw, port, XM_RXO_OK_LO); + data[0] = (u64) xm_read32(hw, port, XM_TXO_OK_HI) << 32 + | xm_read32(hw, port, XM_TXO_OK_LO); + data[1] = (u64) xm_read32(hw, port, XM_RXO_OK_HI) << 32 + | xm_read32(hw, port, XM_RXO_OK_LO); for (i = 2; i < ARRAY_SIZE(skge_stats); i++) - data[i] = skge_xm_read32(hw, port, skge_stats[i].xmac_offset); + data[i] = xm_read32(hw, port, skge_stats[i].xmac_offset); } static void genesis_mac_intr(struct skge_hw *hw, int port) { struct skge_port *skge = netdev_priv(hw->dev[port]); - u16 status = skge_xm_read16(hw, port, XM_ISRC); - - pr_debug("genesis_intr status %x\n", status); - if (hw->phy_type == SK_PHY_XMAC) { - /* LInk down, start polling for state change */ - if (status & XM_IS_INP_ASS) { - skge_xm_write16(hw, port, XM_IMSK, - skge_xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS); - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - } - else if (status & XM_IS_AND) - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - } + u16 status = xm_read16(hw, port, XM_ISRC); + + if (netif_msg_intr(skge)) + printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n", + skge->netdev->name, status); if (status & XM_IS_TXF_UR) { - skge_xm_write32(hw, port, XM_MODE, XM_MD_FTF); + xm_write32(hw, port, XM_MODE, XM_MD_FTF); ++skge->net_stats.tx_fifo_errors; } if (status & XM_IS_RXF_OV) { - skge_xm_write32(hw, port, XM_MODE, XM_MD_FRF); + xm_write32(hw, port, XM_MODE, XM_MD_FRF); ++skge->net_stats.rx_fifo_errors; } } -static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) +static void gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) { int i; - skge_gma_write16(hw, port, GM_SMI_DATA, val); - skge_gma_write16(hw, port, GM_SMI_CTRL, + gma_write16(hw, port, GM_SMI_DATA, val); + gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(hw->phy_addr) | GM_SMI_CT_REG_AD(reg)); for (i = 0; i < PHY_RETRIES; i++) { udelay(1); - if (!(skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) + if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) break; } } -static u16 skge_gm_phy_read(struct skge_hw *hw, int port, u16 reg) +static u16 gm_phy_read(struct skge_hw *hw, int port, u16 reg) { int i; - skge_gma_write16(hw, port, GM_SMI_CTRL, + gma_write16(hw, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(hw->phy_addr) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); for (i = 0; i < PHY_RETRIES; i++) { udelay(1); - if (skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) + if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) goto ready; } @@ -1422,24 +1447,7 @@ static u16 skge_gm_phy_read(struct skge_hw *hw, int port, u16 reg) hw->dev[port]->name); return 0; ready: - return skge_gma_read16(hw, port, GM_SMI_DATA); -} - -static void genesis_link_down(struct skge_port *skge) -{ - struct skge_hw *hw = skge->hw; - int port = skge->port; - - pr_debug("genesis_link_down\n"); - - skge_xm_write16(hw, port, XM_MMU_CMD, - skge_xm_read16(hw, port, XM_MMU_CMD) - & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); - - /* dummy read to ensure writing */ - (void) skge_xm_read16(hw, port, XM_MMU_CMD); - - skge_link_down(skge); + return gma_read16(hw, port, GM_SMI_DATA); } static void genesis_link_up(struct skge_port *skge) @@ -1450,7 +1458,7 @@ static void genesis_link_up(struct skge_port *skge) u32 mode, msk; pr_debug("genesis_link_up\n"); - cmd = skge_xm_read16(hw, port, XM_MMU_CMD); + cmd = xm_read16(hw, port, XM_MMU_CMD); /* * enabling pause frame reception is required for 1000BT @@ -1458,14 +1466,15 @@ static void genesis_link_up(struct skge_port *skge) */ if (skge->flow_control == FLOW_MODE_NONE || skge->flow_control == FLOW_MODE_LOC_SEND) + /* Disable Pause Frame Reception */ cmd |= XM_MMU_IGN_PF; else /* Enable Pause Frame Reception */ cmd &= ~XM_MMU_IGN_PF; - skge_xm_write16(hw, port, XM_MMU_CMD, cmd); + xm_write16(hw, port, XM_MMU_CMD, cmd); - mode = skge_xm_read32(hw, port, XM_MODE); + mode = xm_read32(hw, port, XM_MODE); if (skge->flow_control == FLOW_MODE_SYMMETRIC || skge->flow_control == FLOW_MODE_LOC_SEND) { /* @@ -1479,10 +1488,10 @@ static void genesis_link_up(struct skge_port *skge) /* XM_PAUSE_DA = '010000C28001' (default) */ /* XM_MAC_PTIME = 0xffff (maximum) */ /* remember this value is defined in big endian (!) */ - skge_xm_write16(hw, port, XM_MAC_PTIME, 0xffff); + xm_write16(hw, port, XM_MAC_PTIME, 0xffff); mode |= XM_PAUSE_MODE; - skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE); + skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE); } else { /* * disable pause frame generation is required for 1000BT @@ -1491,125 +1500,68 @@ static void genesis_link_up(struct skge_port *skge) /* Disable Pause Mode in Mode Register */ mode &= ~XM_PAUSE_MODE; - skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE); + skge_write16(hw, SK_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE); } - skge_xm_write32(hw, port, XM_MODE, mode); + xm_write32(hw, port, XM_MODE, mode); msk = XM_DEF_MSK; - if (hw->phy_type != SK_PHY_XMAC) - msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */ + /* disable GP0 interrupt bit for external Phy */ + msk |= XM_IS_INP_ASS; - skge_xm_write16(hw, port, XM_IMSK, msk); - skge_xm_read16(hw, port, XM_ISRC); + xm_write16(hw, port, XM_IMSK, msk); + xm_read16(hw, port, XM_ISRC); /* get MMU Command Reg. */ - cmd = skge_xm_read16(hw, port, XM_MMU_CMD); - if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL) + cmd = xm_read16(hw, port, XM_MMU_CMD); + if (skge->duplex == DUPLEX_FULL) cmd |= XM_MMU_GMII_FD; - if (hw->phy_type == SK_PHY_BCOM) { - /* - * Workaround BCOM Errata (#10523) for all BCom Phys - * Enable Power Management after link up - */ - skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, - skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) - & ~PHY_B_AC_DIS_PM); - skge_xm_phy_write(hw, port, PHY_BCOM_INT_MASK, - PHY_B_DEF_MSK); - } + /* + * Workaround BCOM Errata (#10523) for all BCom Phys + * Enable Power Management after link up + */ + xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, + xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) + & ~PHY_B_AC_DIS_PM); + xm_phy_write(hw, port, PHY_BCOM_INT_MASK, PHY_B_DEF_MSK); /* enable Rx/Tx */ - skge_xm_write16(hw, port, XM_MMU_CMD, + xm_write16(hw, port, XM_MMU_CMD, cmd | XM_MMU_ENA_RX | XM_MMU_ENA_TX); skge_link_up(skge); } -static void genesis_bcom_intr(struct skge_port *skge) +static inline void bcom_phy_intr(struct skge_port *skge) { struct skge_hw *hw = skge->hw; int port = skge->port; - u16 stat = skge_xm_phy_read(hw, port, PHY_BCOM_INT_STAT); + u16 isrc; + + isrc = xm_phy_read(hw, port, PHY_BCOM_INT_STAT); + if (netif_msg_intr(skge)) + printk(KERN_DEBUG PFX "%s: phy interrupt status 0x%x\n", + skge->netdev->name, isrc); - pr_debug("genesis_bcom intr stat=%x\n", stat); + if (isrc & PHY_B_IS_PSE) + printk(KERN_ERR PFX "%s: uncorrectable pair swap error\n", + hw->dev[port]->name); /* Workaround BCom Errata: * enable and disable loopback mode if "NO HCD" occurs. */ - if (stat & PHY_B_IS_NO_HDCL) { - u16 ctrl = skge_xm_phy_read(hw, port, PHY_BCOM_CTRL); - skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, + if (isrc & PHY_B_IS_NO_HDCL) { + u16 ctrl = xm_phy_read(hw, port, PHY_BCOM_CTRL); + xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl | PHY_CT_LOOP); - skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, + xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl & ~PHY_CT_LOOP); } - stat = skge_xm_phy_read(hw, port, PHY_BCOM_STAT); - if (stat & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) { - u16 aux = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_STAT); - if ( !(aux & PHY_B_AS_LS) && netif_carrier_ok(skge->netdev)) - genesis_link_down(skge); - - else if (stat & PHY_B_IS_LST_CHANGE) { - if (aux & PHY_B_AS_AN_C) { - switch (aux & PHY_B_AS_AN_RES_MSK) { - case PHY_B_RES_1000FD: - skge->duplex = DUPLEX_FULL; - break; - case PHY_B_RES_1000HD: - skge->duplex = DUPLEX_HALF; - break; - } - - switch (aux & PHY_B_AS_PAUSE_MSK) { - case PHY_B_AS_PAUSE_MSK: - skge->flow_control = FLOW_MODE_SYMMETRIC; - break; - case PHY_B_AS_PRR: - skge->flow_control = FLOW_MODE_REM_SEND; - break; - case PHY_B_AS_PRT: - skge->flow_control = FLOW_MODE_LOC_SEND; - break; - default: - skge->flow_control = FLOW_MODE_NONE; - } - skge->speed = SPEED_1000; - } - genesis_link_up(skge); - } - else - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - } -} + if (isrc & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) + bcom_check_link(hw, port); -/* Perodic poll of phy status to check for link transistion */ -static void skge_link_timer(unsigned long __arg) -{ - struct skge_port *skge = (struct skge_port *) __arg; - struct skge_hw *hw = skge->hw; - int port = skge->port; - - if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev)) - return; - - spin_lock_bh(&hw->phy_lock); - if (hw->phy_type == SK_PHY_BCOM) - genesis_bcom_intr(skge); - else { - int i; - for (i = 0; i < 3; i++) - if (skge_xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS) - break; - - if (i == 3) - mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); - else - genesis_link_up(skge); - } - spin_unlock_bh(&hw->phy_lock); } /* Marvell Phy Initailization */ @@ -1621,31 +1573,27 @@ static void yukon_init(struct skge_hw *hw, int port) pr_debug("yukon_init\n"); if (skge->autoneg == AUTONEG_ENABLE) { - u16 ectrl = skge_gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); + u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | PHY_M_EC_MAC_S_MSK); ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); - /* on PHY 88E1111 there is a change for downshift control */ - if (hw->chip_id == CHIP_ID_YUKON_EC) - ectrl |= PHY_M_EC_M_DSC_2(0) | PHY_M_EC_DOWN_S_ENA; - else - ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); + ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); - skge_gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); + gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); } - ctrl = skge_gm_phy_read(hw, port, PHY_MARV_CTRL); + ctrl = gm_phy_read(hw, port, PHY_MARV_CTRL); if (skge->autoneg == AUTONEG_DISABLE) ctrl &= ~PHY_CT_ANE; ctrl |= PHY_CT_RESET; - skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); ctrl = 0; ct1000 = 0; - adv = PHY_SEL_TYPE; + adv = PHY_AN_CSMA; if (skge->autoneg == AUTONEG_ENABLE) { if (iscopper(hw)) { @@ -1661,41 +1609,12 @@ static void yukon_init(struct skge_hw *hw, int port) adv |= PHY_M_AN_10_FD; if (skge->advertising & ADVERTISED_10baseT_Half) adv |= PHY_M_AN_10_HD; - - /* Set Flow-control capabilities */ - switch (skge->flow_control) { - case FLOW_MODE_NONE: - adv |= PHY_B_P_NO_PAUSE; - break; - case FLOW_MODE_LOC_SEND: - adv |= PHY_B_P_ASYM_MD; - break; - case FLOW_MODE_SYMMETRIC: - adv |= PHY_B_P_SYM_MD; - break; - case FLOW_MODE_REM_SEND: - adv |= PHY_B_P_BOTH_MD; - break; - } - } else { /* special defines for FIBER (88E1011S only) */ + } else /* special defines for FIBER (88E1011S only) */ adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; - /* Set Flow-control capabilities */ - switch (skge->flow_control) { - case FLOW_MODE_NONE: - adv |= PHY_M_P_NO_PAUSE_X; - break; - case FLOW_MODE_LOC_SEND: - adv |= PHY_M_P_ASYM_MD_X; - break; - case FLOW_MODE_SYMMETRIC: - adv |= PHY_M_P_SYM_MD_X; - break; - case FLOW_MODE_REM_SEND: - adv |= PHY_M_P_BOTH_MD_X; - break; - } - } + /* Set Flow-control capabilities */ + adv |= phy_pause_map[skge->flow_control]; + /* Restart Auto-negotiation */ ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; } else { @@ -1717,36 +1636,23 @@ static void yukon_init(struct skge_hw *hw, int port) ctrl |= PHY_CT_RESET; } - if (hw->chip_id != CHIP_ID_YUKON_FE) - skge_gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); + gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); - skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); - skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); + gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); /* Setup Phy LED's */ ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); ledover = 0; - if (hw->chip_id == CHIP_ID_YUKON_FE) { - /* on 88E3082 these bits are at 11..9 (shifted left) */ - ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; - - skge_gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, - ((skge_gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR) - - & ~PHY_M_FELP_LED1_MSK) - | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL))); - } else { - /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ - ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; - /* turn off the Rx LED (LED_RX) */ - ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); - } + /* turn off the Rx LED (LED_RX) */ + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); /* disable blink mode (LED_DUPLEX) on collisions */ ctrl |= PHY_M_LEDC_DP_CTRL; - skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) { /* turn on 100 Mbps LED (LED_LINK100) */ @@ -1754,25 +1660,25 @@ static void yukon_init(struct skge_hw *hw, int port) } if (ledover) - skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); /* Enable phy interrupt on autonegotiation complete (or link up) */ if (skge->autoneg == AUTONEG_ENABLE) - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); else - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); } static void yukon_reset(struct skge_hw *hw, int port) { - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */ - skge_gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ - skge_gma_write16(hw, port, GM_MC_ADDR_H2, 0); - skge_gma_write16(hw, port, GM_MC_ADDR_H3, 0); - skge_gma_write16(hw, port, GM_MC_ADDR_H4, 0); + gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */ + gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ + gma_write16(hw, port, GM_MC_ADDR_H2, 0); + gma_write16(hw, port, GM_MC_ADDR_H3, 0); + gma_write16(hw, port, GM_MC_ADDR_H4, 0); - skge_gma_write16(hw, port, GM_RX_CTRL, - skge_gma_read16(hw, port, GM_RX_CTRL) + gma_write16(hw, port, GM_RX_CTRL, + gma_read16(hw, port, GM_RX_CTRL) | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); } @@ -1785,17 +1691,17 @@ static void yukon_mac_init(struct skge_hw *hw, int port) /* WA code for COMA mode -- set PHY reset */ if (hw->chip_id == CHIP_ID_YUKON_LITE && - chip_rev(hw) == CHIP_REV_YU_LITE_A3) + hw->chip_rev == CHIP_REV_YU_LITE_A3) skge_write32(hw, B2_GP_IO, (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9)); /* hard reset */ - skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), GPC_RST_SET); - skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_RST_SET); + skge_write32(hw, SK_REG(port, GPHY_CTRL), GPC_RST_SET); + skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET); /* WA code for COMA mode -- clear PHY reset */ if (hw->chip_id == CHIP_ID_YUKON_LITE && - chip_rev(hw) == CHIP_REV_YU_LITE_A3) + hw->chip_rev == CHIP_REV_YU_LITE_A3) skge_write32(hw, B2_GP_IO, (skge_read32(hw, B2_GP_IO) | GP_DIR_9) & ~GP_IO_9); @@ -1806,13 +1712,13 @@ static void yukon_mac_init(struct skge_hw *hw, int port) reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB; /* Clear GMC reset */ - skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_SET); - skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_CLR); - skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); + skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET); + skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_CLR); + skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); if (skge->autoneg == AUTONEG_DISABLE) { reg = GM_GPCR_AU_ALL_DIS; - skge_gma_write16(hw, port, GM_GP_CTRL, - skge_gma_read16(hw, port, GM_GP_CTRL) | reg); + gma_write16(hw, port, GM_GP_CTRL, + gma_read16(hw, port, GM_GP_CTRL) | reg); switch (skge->speed) { case SPEED_1000: @@ -1828,7 +1734,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port) reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL; switch (skge->flow_control) { case FLOW_MODE_NONE: - skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + skge_write32(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); reg |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; break; case FLOW_MODE_LOC_SEND: @@ -1836,7 +1742,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port) reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; } - skge_gma_write16(hw, port, GM_GP_CTRL, reg); + gma_write16(hw, port, GM_GP_CTRL, reg); skge_read16(hw, GMAC_IRQ_SRC); spin_lock_bh(&hw->phy_lock); @@ -1844,25 +1750,25 @@ static void yukon_mac_init(struct skge_hw *hw, int port) spin_unlock_bh(&hw->phy_lock); /* MIB clear */ - reg = skge_gma_read16(hw, port, GM_PHY_ADDR); - skge_gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); + reg = gma_read16(hw, port, GM_PHY_ADDR); + gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); for (i = 0; i < GM_MIB_CNT_SIZE; i++) - skge_gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i); - skge_gma_write16(hw, port, GM_PHY_ADDR, reg); + gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i); + gma_write16(hw, port, GM_PHY_ADDR, reg); /* transmit control */ - skge_gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); + gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); /* receive control reg: unicast + multicast + no FCS */ - skge_gma_write16(hw, port, GM_RX_CTRL, + gma_write16(hw, port, GM_RX_CTRL, GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); /* transmit flow control */ - skge_gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); + gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); /* transmit parameter */ - skge_gma_write16(hw, port, GM_TX_PARAM, + gma_write16(hw, port, GM_TX_PARAM, TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | TX_IPG_JAM_DATA(TX_IPG_JAM_DEF)); @@ -1872,33 +1778,33 @@ static void yukon_mac_init(struct skge_hw *hw, int port) if (hw->dev[port]->mtu > 1500) reg |= GM_SMOD_JUMBO_ENA; - skge_gma_write16(hw, port, GM_SERIAL_MODE, reg); + gma_write16(hw, port, GM_SERIAL_MODE, reg); /* physical address: used for pause frames */ - skge_gm_set_addr(hw, port, GM_SRC_ADDR_1L, addr); + gma_set_addr(hw, port, GM_SRC_ADDR_1L, addr); /* virtual address for data */ - skge_gm_set_addr(hw, port, GM_SRC_ADDR_2L, addr); + gma_set_addr(hw, port, GM_SRC_ADDR_2L, addr); /* enable interrupt mask for counter overflows */ - skge_gma_write16(hw, port, GM_TX_IRQ_MSK, 0); - skge_gma_write16(hw, port, GM_RX_IRQ_MSK, 0); - skge_gma_write16(hw, port, GM_TR_IRQ_MSK, 0); + gma_write16(hw, port, GM_TX_IRQ_MSK, 0); + gma_write16(hw, port, GM_RX_IRQ_MSK, 0); + gma_write16(hw, port, GM_TR_IRQ_MSK, 0); /* Initialize Mac Fifo */ /* Configure Rx MAC FIFO */ - skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK); + skge_write16(hw, SK_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK); reg = GMF_OPER_ON | GMF_RX_F_FL_ON; if (hw->chip_id == CHIP_ID_YUKON_LITE && - chip_rev(hw) == CHIP_REV_YU_LITE_A3) + hw->chip_rev == CHIP_REV_YU_LITE_A3) reg &= ~GMF_RX_F_FL_ON; - skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); - skge_write16(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), reg); - skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); + skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg); + skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); /* Configure Tx MAC FIFO */ - skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); - skge_write16(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); + skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); + skge_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); } static void yukon_stop(struct skge_port *skge) @@ -1907,19 +1813,19 @@ static void yukon_stop(struct skge_port *skge) int port = skge->port; if (hw->chip_id == CHIP_ID_YUKON_LITE && - chip_rev(hw) == CHIP_REV_YU_LITE_A3) { + hw->chip_rev == CHIP_REV_YU_LITE_A3) { skge_write32(hw, B2_GP_IO, skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9); } - skge_gma_write16(hw, port, GM_GP_CTRL, - skge_gma_read16(hw, port, GM_GP_CTRL) + gma_write16(hw, port, GM_GP_CTRL, + gma_read16(hw, port, GM_GP_CTRL) & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA)); - skge_gma_read16(hw, port, GM_GP_CTRL); + gma_read16(hw, port, GM_GP_CTRL); /* set GPHY Control reset */ - skge_gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET); - skge_gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET); + gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET); + gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET); } static void yukon_get_stats(struct skge_port *skge, u64 *data) @@ -1928,39 +1834,40 @@ static void yukon_get_stats(struct skge_port *skge, u64 *data) int port = skge->port; int i; - data[0] = (u64) skge_gma_read32(hw, port, GM_TXO_OK_HI) << 32 - | skge_gma_read32(hw, port, GM_TXO_OK_LO); - data[1] = (u64) skge_gma_read32(hw, port, GM_RXO_OK_HI) << 32 - | skge_gma_read32(hw, port, GM_RXO_OK_LO); + data[0] = (u64) gma_read32(hw, port, GM_TXO_OK_HI) << 32 + | gma_read32(hw, port, GM_TXO_OK_LO); + data[1] = (u64) gma_read32(hw, port, GM_RXO_OK_HI) << 32 + | gma_read32(hw, port, GM_RXO_OK_LO); for (i = 2; i < ARRAY_SIZE(skge_stats); i++) - data[i] = skge_gma_read32(hw, port, + data[i] = gma_read32(hw, port, skge_stats[i].gma_offset); } static void yukon_mac_intr(struct skge_hw *hw, int port) { - struct skge_port *skge = netdev_priv(hw->dev[port]); - u8 status = skge_read8(hw, SKGEMAC_REG(port, GMAC_IRQ_SRC)); + struct net_device *dev = hw->dev[port]; + struct skge_port *skge = netdev_priv(dev); + u8 status = skge_read8(hw, SK_REG(port, GMAC_IRQ_SRC)); + + if (netif_msg_intr(skge)) + printk(KERN_DEBUG PFX "%s: mac interrupt status 0x%x\n", + dev->name, status); - pr_debug("yukon_intr status %x\n", status); if (status & GM_IS_RX_FF_OR) { ++skge->net_stats.rx_fifo_errors; - skge_gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO); + gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO); } if (status & GM_IS_TX_FF_UR) { ++skge->net_stats.tx_fifo_errors; - skge_gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU); + gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU); } } static u16 yukon_speed(const struct skge_hw *hw, u16 aux) { - if (hw->chip_id == CHIP_ID_YUKON_FE) - return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; - - switch(aux & PHY_M_PS_SPEED_MSK) { + switch (aux & PHY_M_PS_SPEED_MSK) { case PHY_M_PS_SPEED_1000: return SPEED_1000; case PHY_M_PS_SPEED_100: @@ -1981,15 +1888,15 @@ static void yukon_link_up(struct skge_port *skge) /* Enable Transmit FIFO Underrun */ skge_write8(hw, GMAC_IRQ_MSK, GMAC_DEF_MSK); - reg = skge_gma_read16(hw, port, GM_GP_CTRL); + reg = gma_read16(hw, port, GM_GP_CTRL); if (skge->duplex == DUPLEX_FULL || skge->autoneg == AUTONEG_ENABLE) reg |= GM_GPCR_DUP_FULL; /* enable Rx/Tx */ reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; - skge_gma_write16(hw, port, GM_GP_CTRL, reg); + gma_write16(hw, port, GM_GP_CTRL, reg); - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); + gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); skge_link_up(skge); } @@ -1999,16 +1906,15 @@ static void yukon_link_down(struct skge_port *skge) int port = skge->port; pr_debug("yukon_link_down\n"); - skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); - skge_gm_phy_write(hw, port, GM_GP_CTRL, - skge_gm_phy_read(hw, port, GM_GP_CTRL) + gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + gm_phy_write(hw, port, GM_GP_CTRL, + gm_phy_read(hw, port, GM_GP_CTRL) & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA)); - if (hw->chip_id != CHIP_ID_YUKON_FE && - skge->flow_control == FLOW_MODE_REM_SEND) { + if (skge->flow_control == FLOW_MODE_REM_SEND) { /* restore Asymmetric Pause bit */ - skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, - skge_gm_phy_read(hw, port, + gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, + gm_phy_read(hw, port, PHY_MARV_AUNE_ADV) | PHY_M_AN_ASP); @@ -2027,20 +1933,21 @@ static void yukon_phy_intr(struct skge_port *skge) const char *reason = NULL; u16 istatus, phystat; - istatus = skge_gm_phy_read(hw, port, PHY_MARV_INT_STAT); - phystat = skge_gm_phy_read(hw, port, PHY_MARV_PHY_STAT); - pr_debug("yukon phy intr istat=%x phy_stat=%x\n", istatus, phystat); + istatus = gm_phy_read(hw, port, PHY_MARV_INT_STAT); + phystat = gm_phy_read(hw, port, PHY_MARV_PHY_STAT); + + if (netif_msg_intr(skge)) + printk(KERN_DEBUG PFX "%s: phy interrupt status 0x%x 0x%x\n", + skge->netdev->name, istatus, phystat); if (istatus & PHY_M_IS_AN_COMPL) { - if (skge_gm_phy_read(hw, port, PHY_MARV_AUNE_LP) + if (gm_phy_read(hw, port, PHY_MARV_AUNE_LP) & PHY_M_AN_RF) { reason = "remote fault"; goto failed; } - if (!(hw->chip_id == CHIP_ID_YUKON_FE || hw->chip_id == CHIP_ID_YUKON_EC) - && (skge_gm_phy_read(hw, port, PHY_MARV_1000T_STAT) - & PHY_B_1000S_MSF)) { + if (gm_phy_read(hw, port, PHY_MARV_1000T_STAT) & PHY_B_1000S_MSF) { reason = "master/slave fault"; goto failed; } @@ -2054,10 +1961,6 @@ static void yukon_phy_intr(struct skge_port *skge) ? DUPLEX_FULL : DUPLEX_HALF; skge->speed = yukon_speed(hw, phystat); - /* Tx & Rx Pause Enabled bits are at 9..8 */ - if (hw->chip_id == CHIP_ID_YUKON_XL) - phystat >>= 6; - /* We are using IEEE 802.3z/D5.0 Table 37-4 */ switch (phystat & PHY_M_PS_PAUSE_MSK) { case PHY_M_PS_PAUSE_MSK: @@ -2075,9 +1978,9 @@ static void yukon_phy_intr(struct skge_port *skge) if (skge->flow_control == FLOW_MODE_NONE || (skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF)) - skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); else - skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_ON); yukon_link_up(skge); return; } @@ -2161,6 +2064,12 @@ static int skge_up(struct net_device *dev) if (netif_msg_ifup(skge)) printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); + if (dev->mtu > RX_BUF_SIZE) + skge->rx_buf_size = dev->mtu + ETH_HLEN + NET_IP_ALIGN; + else + skge->rx_buf_size = RX_BUF_SIZE; + + rx_size = skge->rx_ring.count * sizeof(struct skge_rx_desc); tx_size = skge->tx_ring.count * sizeof(struct skge_tx_desc); skge->mem_size = tx_size + rx_size; @@ -2173,7 +2082,8 @@ static int skge_up(struct net_device *dev) if ((err = skge_ring_alloc(&skge->rx_ring, skge->mem, skge->dma))) goto free_pci_mem; - if (skge_rx_fill(skge)) + err = skge_rx_fill(skge); + if (err) goto free_rx_ring; if ((err = skge_ring_alloc(&skge->tx_ring, skge->mem + rx_size, @@ -2182,6 +2092,10 @@ static int skge_up(struct net_device *dev) skge->tx_avail = skge->tx_ring.count - 1; + /* Enable IRQ from port */ + hw->intr_mask |= portirqmask[port]; + skge_write32(hw, B0_IMSK, hw->intr_mask); + /* Initialze MAC */ if (hw->chip_id == CHIP_ID_GENESIS) genesis_mac_init(hw, port); @@ -2189,7 +2103,7 @@ static int skge_up(struct net_device *dev) yukon_mac_init(hw, port); /* Configure RAMbuffers */ - chunk = hw->ram_size / (isdualport(hw) ? 4 : 2); + chunk = hw->ram_size / ((hw->ports + 1)*2); ram_addr = hw->ram_offset + 2 * chunk * port; skge_ramset(hw, rxqaddr[port], ram_addr, chunk); @@ -2227,7 +2141,6 @@ static int skge_down(struct net_device *dev) netif_stop_queue(dev); del_timer_sync(&skge->led_blink); - del_timer_sync(&skge->link_check); /* Stop transmitter */ skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP); @@ -2240,12 +2153,12 @@ static int skge_down(struct net_device *dev) yukon_stop(skge); /* Disable Force Sync bit and Enable Alloc bit */ - skge_write8(hw, SKGEMAC_REG(port, TXA_CTRL), + skge_write8(hw, SK_REG(port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); /* Stop Interval Timer and Limit Counter of Tx Arbiter */ - skge_write32(hw, SKGEMAC_REG(port, TXA_ITI_INI), 0L); - skge_write32(hw, SKGEMAC_REG(port, TXA_LIM_INI), 0L); + skge_write32(hw, SK_REG(port, TXA_ITI_INI), 0L); + skge_write32(hw, SK_REG(port, TXA_LIM_INI), 0L); /* Reset PCI FIFO */ skge_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_SET_RESET); @@ -2260,13 +2173,13 @@ static int skge_down(struct net_device *dev) skge_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_SET_RESET); if (hw->chip_id == CHIP_ID_GENESIS) { - skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_SET); - skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_SET); - skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_STOP); - skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_STOP); + skge_write8(hw, SK_REG(port, TX_MFF_CTRL2), MFF_RST_SET); + skge_write8(hw, SK_REG(port, RX_MFF_CTRL2), MFF_RST_SET); + skge_write8(hw, SK_REG(port, TX_LED_CTRL), LED_STOP); + skge_write8(hw, SK_REG(port, RX_LED_CTRL), LED_STOP); } else { - skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); - skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); + skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); } /* turn off led's */ @@ -2299,10 +2212,10 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) local_irq_save(flags); if (!spin_trylock(&skge->tx_lock)) { - /* Collision - tell upper layer to requeue */ - local_irq_restore(flags); - return NETDEV_TX_LOCKED; - } + /* Collision - tell upper layer to requeue */ + local_irq_restore(flags); + return NETDEV_TX_LOCKED; + } if (unlikely(skge->tx_avail < skb_shinfo(skb)->nr_frags +1)) { netif_stop_queue(dev); @@ -2333,7 +2246,7 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) * does. Looks like hardware is wrong? */ if (ip->protocol == IPPROTO_UDP - && chip_rev(hw) == 0 && hw->chip_id == CHIP_ID_YUKON) + && hw->chip_rev == 0 && hw->chip_id == CHIP_ID_YUKON) control = BMU_TCP_CHECK; else control = BMU_UDP_CHECK; @@ -2394,6 +2307,7 @@ static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) static inline void skge_tx_free(struct skge_hw *hw, struct skge_element *e) { + /* This ring element can be skb or fragment */ if (e->skb) { pci_unmap_single(hw->pdev, pci_unmap_addr(e, mapaddr), @@ -2438,16 +2352,17 @@ static void skge_tx_timeout(struct net_device *dev) static int skge_change_mtu(struct net_device *dev, int new_mtu) { int err = 0; + int running = netif_running(dev); - if(new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) + if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) return -EINVAL; - dev->mtu = new_mtu; - if (netif_running(dev)) { + if (running) skge_down(dev); + dev->mtu = new_mtu; + if (running) skge_up(dev); - } return err; } @@ -2462,7 +2377,9 @@ static void genesis_set_multicast(struct net_device *dev) u32 mode; u8 filter[8]; - mode = skge_xm_read32(hw, port, XM_MODE); + pr_debug("genesis_set_multicast flags=%x count=%d\n", dev->flags, dev->mc_count); + + mode = xm_read32(hw, port, XM_MODE); mode |= XM_MD_ENA_HASH; if (dev->flags & IFF_PROMISC) mode |= XM_MD_ENA_PROM; @@ -2473,17 +2390,16 @@ static void genesis_set_multicast(struct net_device *dev) memset(filter, 0xff, sizeof(filter)); else { memset(filter, 0, sizeof(filter)); - for(i = 0; list && i < count; i++, list = list->next) { - u32 crc = crc32_le(~0, list->dmi_addr, ETH_ALEN); - u8 bit = 63 - (crc & 63); - + for (i = 0; list && i < count; i++, list = list->next) { + u32 crc, bit; + crc = ether_crc_le(ETH_ALEN, list->dmi_addr); + bit = ~crc & 0x3f; filter[bit/8] |= 1 << (bit%8); } } - skge_xm_outhash(hw, port, XM_HSM, filter); - - skge_xm_write32(hw, port, XM_MODE, mode); + xm_write32(hw, port, XM_MODE, mode); + xm_outhash(hw, port, XM_HSM, filter); } static void yukon_set_multicast(struct net_device *dev) @@ -2497,7 +2413,7 @@ static void yukon_set_multicast(struct net_device *dev) memset(filter, 0, sizeof(filter)); - reg = skge_gma_read16(hw, port, GM_RX_CTRL); + reg = gma_read16(hw, port, GM_RX_CTRL); reg |= GM_RXCR_UCF_ENA; if (dev->flags & IFF_PROMISC) /* promiscious */ @@ -2510,23 +2426,23 @@ static void yukon_set_multicast(struct net_device *dev) int i; reg |= GM_RXCR_MCF_ENA; - for(i = 0; list && i < dev->mc_count; i++, list = list->next) { + for (i = 0; list && i < dev->mc_count; i++, list = list->next) { u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; filter[bit/8] |= 1 << (bit%8); } } - skge_gma_write16(hw, port, GM_MC_ADDR_H1, + gma_write16(hw, port, GM_MC_ADDR_H1, (u16)filter[0] | ((u16)filter[1] << 8)); - skge_gma_write16(hw, port, GM_MC_ADDR_H2, + gma_write16(hw, port, GM_MC_ADDR_H2, (u16)filter[2] | ((u16)filter[3] << 8)); - skge_gma_write16(hw, port, GM_MC_ADDR_H3, + gma_write16(hw, port, GM_MC_ADDR_H3, (u16)filter[4] | ((u16)filter[5] << 8)); - skge_gma_write16(hw, port, GM_MC_ADDR_H4, + gma_write16(hw, port, GM_MC_ADDR_H4, (u16)filter[6] | ((u16)filter[7] << 8)); - skge_gma_write16(hw, port, GM_RX_CTRL, reg); + gma_write16(hw, port, GM_RX_CTRL, reg); } static inline int bad_phy_status(const struct skge_hw *hw, u32 status) @@ -2545,28 +2461,76 @@ static void skge_rx_error(struct skge_port *skge, int slot, printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n", skge->netdev->name, slot, control, status); - if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) - || (control & BMU_BBC) > skge->netdev->mtu + VLAN_ETH_HLEN) + if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF)) skge->net_stats.rx_length_errors++; - else { - if (skge->hw->chip_id == CHIP_ID_GENESIS) { - if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR)) - skge->net_stats.rx_length_errors++; - if (status & XMR_FS_FRA_ERR) - skge->net_stats.rx_frame_errors++; - if (status & XMR_FS_FCS_ERR) - skge->net_stats.rx_crc_errors++; - } else { - if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE)) - skge->net_stats.rx_length_errors++; - if (status & GMR_FS_FRAGMENT) - skge->net_stats.rx_frame_errors++; - if (status & GMR_FS_CRC_ERR) - skge->net_stats.rx_crc_errors++; + else if (skge->hw->chip_id == CHIP_ID_GENESIS) { + if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR)) + skge->net_stats.rx_length_errors++; + if (status & XMR_FS_FRA_ERR) + skge->net_stats.rx_frame_errors++; + if (status & XMR_FS_FCS_ERR) + skge->net_stats.rx_crc_errors++; + } else { + if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE)) + skge->net_stats.rx_length_errors++; + if (status & GMR_FS_FRAGMENT) + skge->net_stats.rx_frame_errors++; + if (status & GMR_FS_CRC_ERR) + skge->net_stats.rx_crc_errors++; + } +} + +/* Get receive buffer from descriptor. + * Handles copy of small buffers and reallocation failures + */ +static inline struct sk_buff *skge_rx_get(struct skge_port *skge, + struct skge_element *e, + unsigned int len) +{ + struct sk_buff *nskb, *skb; + + if (len < RX_COPY_THRESHOLD) { + nskb = skge_rx_alloc(skge->netdev, len + NET_IP_ALIGN); + if (unlikely(!nskb)) + return NULL; + + pci_dma_sync_single_for_cpu(skge->hw->pdev, + pci_unmap_addr(e, mapaddr), + len, PCI_DMA_FROMDEVICE); + memcpy(nskb->data, e->skb->data, len); + pci_dma_sync_single_for_device(skge->hw->pdev, + pci_unmap_addr(e, mapaddr), + len, PCI_DMA_FROMDEVICE); + + if (skge->rx_csum) { + struct skge_rx_desc *rd = e->desc; + nskb->csum = le16_to_cpu(rd->csum2); + nskb->ip_summed = CHECKSUM_HW; } + skge_rx_reuse(e, skge->rx_buf_size); + return nskb; + } else { + nskb = skge_rx_alloc(skge->netdev, skge->rx_buf_size); + if (unlikely(!nskb)) + return NULL; + + pci_unmap_single(skge->hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); + skb = e->skb; + if (skge->rx_csum) { + struct skge_rx_desc *rd = e->desc; + skb->csum = le16_to_cpu(rd->csum2); + skb->ip_summed = CHECKSUM_HW; + } + + skge_rx_setup(skge, e, nskb, skge->rx_buf_size); + return skb; } } + static int skge_poll(struct net_device *dev, int *budget) { struct skge_port *skge = netdev_priv(dev); @@ -2575,13 +2539,12 @@ static int skge_poll(struct net_device *dev, int *budget) struct skge_element *e; unsigned int to_do = min(dev->quota, *budget); unsigned int work_done = 0; - int done; - static const u32 irqmask[] = { IS_PORT_1, IS_PORT_2 }; - for (e = ring->to_clean; e != ring->to_use && work_done < to_do; - e = e->next) { + pr_debug("skge_poll\n"); + + for (e = ring->to_clean; work_done < to_do; e = e->next) { struct skge_rx_desc *rd = e->desc; - struct sk_buff *skb = e->skb; + struct sk_buff *skb; u32 control, len, status; rmb(); @@ -2590,19 +2553,12 @@ static int skge_poll(struct net_device *dev, int *budget) break; len = control & BMU_BBC; - e->skb = NULL; - - pci_unmap_single(hw->pdev, - pci_unmap_addr(e, mapaddr), - pci_unmap_len(e, maplen), - PCI_DMA_FROMDEVICE); - status = rd->status; - if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) - || len > dev->mtu + VLAN_ETH_HLEN - || bad_phy_status(hw, status)) { + + if (unlikely((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) + || bad_phy_status(hw, status))) { skge_rx_error(skge, e - ring->start, control, status); - dev_kfree_skb(skb); + skge_rx_reuse(e, skge->rx_buf_size); continue; } @@ -2610,43 +2566,37 @@ static int skge_poll(struct net_device *dev, int *budget) printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n", dev->name, e - ring->start, rd->status, len); - skb_put(skb, len); - skb->protocol = eth_type_trans(skb, dev); - - if (skge->rx_csum) { - skb->csum = le16_to_cpu(rd->csum2); - skb->ip_summed = CHECKSUM_HW; - } + skb = skge_rx_get(skge, e, len); + if (likely(skb)) { + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, dev); - dev->last_rx = jiffies; - netif_receive_skb(skb); + dev->last_rx = jiffies; + netif_receive_skb(skb); - ++work_done; + ++work_done; + } else + skge_rx_reuse(e, skge->rx_buf_size); } ring->to_clean = e; - *budget -= work_done; - dev->quota -= work_done; - done = work_done < to_do; - - if (skge_rx_fill(skge)) - done = 0; - /* restart receiver */ wmb(); skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), CSR_START | CSR_IRQ_CL_F); - if (done) { - local_irq_disable(); - hw->intr_mask |= irqmask[skge->port]; - /* Order is important since data can get interrupted */ - skge_write32(hw, B0_IMSK, hw->intr_mask); - __netif_rx_complete(dev); - local_irq_enable(); - } + *budget -= work_done; + dev->quota -= work_done; - return !done; + if (work_done >= to_do) + return 1; /* not done */ + + local_irq_disable(); + __netif_rx_complete(dev); + hw->intr_mask |= portirqmask[skge->port]; + skge_write32(hw, B0_IMSK, hw->intr_mask); + local_irq_enable(); + return 0; } static inline void skge_tx_intr(struct net_device *dev) @@ -2657,7 +2607,7 @@ static inline void skge_tx_intr(struct net_device *dev) struct skge_element *e; spin_lock(&skge->tx_lock); - for(e = ring->to_clean; e != ring->to_use; e = e->next) { + for (e = ring->to_clean; e != ring->to_use; e = e->next) { struct skge_tx_desc *td = e->desc; u32 control; @@ -2690,12 +2640,12 @@ static void skge_mac_parity(struct skge_hw *hw, int port) : (port == 0 ? "(port A)": "(port B")); if (hw->chip_id == CHIP_ID_GENESIS) - skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), + skge_write16(hw, SK_REG(port, TX_MFF_CTRL1), MFF_CLR_PERR); else /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ - skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), - (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0) + skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), + (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0) ? GMF_CLI_TX_FC : GMF_CLI_TX_PE); } @@ -2703,16 +2653,16 @@ static void skge_pci_clear(struct skge_hw *hw) { u16 status; - status = skge_read16(hw, SKGEPCI_REG(PCI_STATUS)); + pci_read_config_word(hw->pdev, PCI_STATUS, &status); skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); - skge_write16(hw, SKGEPCI_REG(PCI_STATUS), - status | PCI_STATUS_ERROR_BITS); + pci_write_config_word(hw->pdev, PCI_STATUS, + status | PCI_STATUS_ERROR_BITS); skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); } static void skge_mac_intr(struct skge_hw *hw, int port) { - if (hw->chip_id == CHIP_ID_GENESIS) + if (hw->chip_id == CHIP_ID_GENESIS) genesis_mac_intr(hw, port); else yukon_mac_intr(hw, port); @@ -2726,9 +2676,9 @@ static void skge_error_irq(struct skge_hw *hw) if (hw->chip_id == CHIP_ID_GENESIS) { /* clear xmac errors */ if (hwstatus & (IS_NO_STAT_M1|IS_NO_TIST_M1)) - skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT); + skge_write16(hw, SK_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT); if (hwstatus & (IS_NO_STAT_M2|IS_NO_TIST_M2)) - skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT); + skge_write16(hw, SK_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT); } else { /* Timestamp (unused) overflow */ if (hwstatus & IS_IRQ_TIST_OV) @@ -2803,8 +2753,8 @@ static void skge_extirq(unsigned long data) if (hw->chip_id != CHIP_ID_GENESIS) yukon_phy_intr(skge); - else if (hw->phy_type == SK_PHY_BCOM) - genesis_bcom_intr(skge); + else + bcom_phy_intr(skge); } } spin_unlock(&hw->phy_lock); @@ -2824,19 +2774,14 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) return IRQ_NONE; status &= hw->intr_mask; - - if ((status & IS_R1_F) && netif_rx_schedule_prep(hw->dev[0])) { - status &= ~IS_R1_F; + if (status & IS_R1_F) { hw->intr_mask &= ~IS_R1_F; - skge_write32(hw, B0_IMSK, hw->intr_mask); - __netif_rx_schedule(hw->dev[0]); + netif_rx_schedule(hw->dev[0]); } - if ((status & IS_R2_F) && netif_rx_schedule_prep(hw->dev[1])) { - status &= ~IS_R2_F; + if (status & IS_R2_F) { hw->intr_mask &= ~IS_R2_F; - skge_write32(hw, B0_IMSK, hw->intr_mask); - __netif_rx_schedule(hw->dev[1]); + netif_rx_schedule(hw->dev[1]); } if (status & IS_XA1_F) @@ -2845,9 +2790,27 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) if (status & IS_XA2_F) skge_tx_intr(hw->dev[1]); + if (status & IS_PA_TO_RX1) { + struct skge_port *skge = netdev_priv(hw->dev[0]); + ++skge->net_stats.rx_over_errors; + skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX1); + } + + if (status & IS_PA_TO_RX2) { + struct skge_port *skge = netdev_priv(hw->dev[1]); + ++skge->net_stats.rx_over_errors; + skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_RX2); + } + + if (status & IS_PA_TO_TX1) + skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX1); + + if (status & IS_PA_TO_TX2) + skge_write16(hw, B3_PA_CTRL, PA_CLR_TO_TX2); + if (status & IS_MAC1) skge_mac_intr(hw, 0); - + if (status & IS_MAC2) skge_mac_intr(hw, 1); @@ -2859,8 +2822,7 @@ static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) tasklet_schedule(&hw->ext_tasklet); } - if (status) - skge_write32(hw, B0_IMSK, hw->intr_mask); + skge_write32(hw, B0_IMSK, hw->intr_mask); return IRQ_HANDLED; } @@ -2904,9 +2866,6 @@ static const struct { { CHIP_ID_YUKON, "Yukon" }, { CHIP_ID_YUKON_LITE, "Yukon-Lite"}, { CHIP_ID_YUKON_LP, "Yukon-LP"}, - { CHIP_ID_YUKON_XL, "Yukon-2 XL"}, - { CHIP_ID_YUKON_EC, "YUKON-2 EC"}, - { CHIP_ID_YUKON_FE, "YUKON-2 FE"}, }; static const char *skge_board_name(const struct skge_hw *hw) @@ -2930,8 +2889,8 @@ static const char *skge_board_name(const struct skge_hw *hw) static int skge_reset(struct skge_hw *hw) { u16 ctst; - u8 t8; - int i, ports; + u8 t8, mac_cfg; + int i; ctst = skge_read16(hw, B0_CTST); @@ -2952,12 +2911,9 @@ static int skge_reset(struct skge_hw *hw) hw->phy_type = skge_read8(hw, B2_E_1) & 0xf; hw->pmd_type = skge_read8(hw, B2_PMD_TYP); - switch(hw->chip_id) { + switch (hw->chip_id) { case CHIP_ID_GENESIS: switch (hw->phy_type) { - case SK_PHY_XMAC: - hw->phy_addr = PHY_ADDR_XMAC; - break; case SK_PHY_BCOM: hw->phy_addr = PHY_ADDR_BCOM; break; @@ -2986,8 +2942,9 @@ static int skge_reset(struct skge_hw *hw) return -EOPNOTSUPP; } - hw->mac_cfg = skge_read8(hw, B2_MAC_CFG); - ports = isdualport(hw) ? 2 : 1; + mac_cfg = skge_read8(hw, B2_MAC_CFG); + hw->ports = (mac_cfg & CFG_SNG_MAC) ? 1 : 2; + hw->chip_rev = (mac_cfg & CFG_CHIP_R_MSK) >> 4; /* read the adapters RAM size */ t8 = skge_read8(hw, B2_E_0); @@ -3010,9 +2967,9 @@ static int skge_reset(struct skge_hw *hw) /* switch power to VCC (WA for VAUX problem) */ skge_write8(hw, B0_POWER_CTRL, PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); - for (i = 0; i < ports; i++) { - skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); - skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); + for (i = 0; i < hw->ports; i++) { + skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); + skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); } } @@ -3022,8 +2979,8 @@ static int skge_reset(struct skge_hw *hw) skge_write8(hw, B0_LED, LED_STAT_ON); /* enable the Tx Arbiters */ - for (i = 0; i < ports; i++) - skge_write8(hw, SKGEMAC_REG(i, TXA_CTRL), TXA_ENA_ARB); + for (i = 0; i < hw->ports; i++) + skge_write8(hw, SK_REG(i, TXA_CTRL), TXA_ENA_ARB); /* Initialize ram interface */ skge_write16(hw, B3_RI_CTRL, RI_RST_CLR); @@ -3050,16 +3007,14 @@ static int skge_reset(struct skge_hw *hw) skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100)); skge_write32(hw, B2_IRQM_CTRL, TIM_START); - hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1; - if (isdualport(hw)) - hw->intr_mask |= IS_PORT_2; + hw->intr_mask = IS_HW_ERR | IS_EXT_REG; skge_write32(hw, B0_IMSK, hw->intr_mask); if (hw->chip_id != CHIP_ID_GENESIS) skge_write8(hw, GMAC_IRQ_MSK, 0); spin_lock_bh(&hw->phy_lock); - for (i = 0; i < ports; i++) { + for (i = 0; i < hw->ports; i++) { if (hw->chip_id == CHIP_ID_GENESIS) genesis_reset(hw, i); else @@ -3071,7 +3026,8 @@ static int skge_reset(struct skge_hw *hw) } /* Initialize network device */ -static struct net_device *skge_devinit(struct skge_hw *hw, int port) +static struct net_device *skge_devinit(struct skge_hw *hw, int port, + int highmem) { struct skge_port *skge; struct net_device *dev = alloc_etherdev(sizeof(*skge)); @@ -3104,6 +3060,8 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port) #endif dev->irq = hw->pdev->irq; dev->features = NETIF_F_LLTX; + if (highmem) + dev->features |= NETIF_F_HIGHDMA; skge = netdev_priv(dev); skge->netdev = dev; @@ -3117,7 +3075,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port) skge->flow_control = FLOW_MODE_SYMMETRIC; skge->duplex = -1; skge->speed = -1; - skge->advertising = skge_modes(hw); + skge->advertising = skge_supported_modes(hw); hw->dev[port] = dev; @@ -3125,10 +3083,6 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port) spin_lock_init(&skge->tx_lock); - init_timer(&skge->link_check); - skge->link_check.function = skge_link_timer; - skge->link_check.data = (unsigned long) skge; - init_timer(&skge->led_blink); skge->led_blink.function = skge_blink_timer; skge->led_blink.data = (unsigned long) skge; @@ -3232,14 +3186,11 @@ static int __devinit skge_probe(struct pci_dev *pdev, printk(KERN_INFO PFX "addr 0x%lx irq %d chip %s rev %d\n", pci_resource_start(pdev, 0), pdev->irq, - skge_board_name(hw), chip_rev(hw)); + skge_board_name(hw), hw->chip_rev); - if ((dev = skge_devinit(hw, 0)) == NULL) + if ((dev = skge_devinit(hw, 0, using_dac)) == NULL) goto err_out_led_off; - if (using_dac) - dev->features |= NETIF_F_HIGHDMA; - if ((err = register_netdev(dev))) { printk(KERN_ERR PFX "%s: cannot register net device\n", pci_name(pdev)); @@ -3248,10 +3199,7 @@ static int __devinit skge_probe(struct pci_dev *pdev, skge_show_addr(dev); - if (isdualport(hw) && (dev1 = skge_devinit(hw, 1))) { - if (using_dac) - dev1->features |= NETIF_F_HIGHDMA; - + if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) { if (register_netdev(dev1) == 0) skge_show_addr(dev1); else { @@ -3288,7 +3236,7 @@ static void __devexit skge_remove(struct pci_dev *pdev) struct skge_hw *hw = pci_get_drvdata(pdev); struct net_device *dev0, *dev1; - if(!hw) + if (!hw) return; if ((dev1 = hw->dev[1])) @@ -3316,7 +3264,7 @@ static int skge_suspend(struct pci_dev *pdev, u32 state) struct skge_hw *hw = pci_get_drvdata(pdev); int i, wol = 0; - for(i = 0; i < 2; i++) { + for (i = 0; i < 2; i++) { struct net_device *dev = hw->dev[i]; if (dev) { @@ -3349,11 +3297,11 @@ static int skge_resume(struct pci_dev *pdev) skge_reset(hw); - for(i = 0; i < 2; i++) { + for (i = 0; i < 2; i++) { struct net_device *dev = hw->dev[i]; if (dev) { netif_device_attach(dev); - if(netif_running(dev)) + if (netif_running(dev)) skge_up(dev); } } |