diff options
Diffstat (limited to 'drivers/net/phy')
29 files changed, 1379 insertions, 210 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 20f14c5fbb7e..03be30cde552 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -21,6 +21,19 @@ config MDIO_BUS if MDIO_BUS +config MDIO_ASPEED + tristate "ASPEED MDIO bus controller" + depends on ARCH_ASPEED || COMPILE_TEST + depends on OF_MDIO && HAS_IOMEM + help + This module provides a driver for the independent MDIO bus + controllers found in the ASPEED AST2600 SoC. This is a driver for the + third revision of the ASPEED MDIO register interface - the first two + revisions are the "old" and "new" interfaces found in the AST2400 and + AST2500, embedded in the MAC. For legacy reasons, FTGMAC100 driver + continues to drive the embedded MDIO controller for the AST2400 and + AST2500 SoCs, so say N if AST2600 support is not required. + config MDIO_BCM_IPROC tristate "Broadcom iProc MDIO bus controller" depends on ARCH_BCM_IPROC || COMPILE_TEST @@ -159,8 +172,8 @@ config MDIO_MSCC_MIIM config MDIO_OCTEON tristate "Octeon and some ThunderX SOCs MDIO buses" - depends on 64BIT - depends on HAS_IOMEM && OF_MDIO + depends on (64BIT && OF_MDIO) || COMPILE_TEST + depends on HAS_IOMEM select MDIO_CAVIUM help This module provides a driver for the Octeon and ThunderX MDIO @@ -244,6 +257,15 @@ config SFP depends on HWMON || HWMON=n select MDIO_I2C +config ADIN_PHY + tristate "Analog Devices Industrial Ethernet PHYs" + help + Adds support for the Analog Devices Industrial Ethernet PHYs. + Currently supports the: + - ADIN1200 - Robust,Industrial, Low Power 10/100 Ethernet PHY + - ADIN1300 - Robust,Industrial, Low Latency 10/100/1000 Gigabit + Ethernet PHY + config AMD_PHY tristate "AMD PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 839acb292c38..a03437e091f3 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -22,6 +22,7 @@ libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o obj-$(CONFIG_PHYLINK) += phylink.o obj-$(CONFIG_PHYLIB) += libphy.o +obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o @@ -46,6 +47,7 @@ obj-$(CONFIG_SFP) += sfp.o sfp-obj-$(CONFIG_SFP) += sfp-bus.o obj-y += $(sfp-obj-y) $(sfp-obj-m) +obj-$(CONFIG_ADIN_PHY) += adin.o obj-$(CONFIG_AMD_PHY) += amd.o aquantia-objs += aquantia_main.o ifdef CONFIG_HWMON diff --git a/drivers/net/phy/adin.c b/drivers/net/phy/adin.c new file mode 100644 index 000000000000..cf5a391c93e6 --- /dev/null +++ b/drivers/net/phy/adin.c @@ -0,0 +1,781 @@ +// SPDX-License-Identifier: GPL-2.0+ +/** + * Driver for Analog Devices Industrial Ethernet PHYs + * + * Copyright 2019 Analog Devices Inc. + */ +#include <linux/kernel.h> +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/property.h> + +#define PHY_ID_ADIN1200 0x0283bc20 +#define PHY_ID_ADIN1300 0x0283bc30 + +#define ADIN1300_MII_EXT_REG_PTR 0x0010 +#define ADIN1300_MII_EXT_REG_DATA 0x0011 + +#define ADIN1300_PHY_CTRL1 0x0012 +#define ADIN1300_AUTO_MDI_EN BIT(10) +#define ADIN1300_MAN_MDIX_EN BIT(9) + +#define ADIN1300_RX_ERR_CNT 0x0014 + +#define ADIN1300_PHY_CTRL_STATUS2 0x0015 +#define ADIN1300_NRG_PD_EN BIT(3) +#define ADIN1300_NRG_PD_TX_EN BIT(2) +#define ADIN1300_NRG_PD_STATUS BIT(1) + +#define ADIN1300_PHY_CTRL2 0x0016 +#define ADIN1300_DOWNSPEED_AN_100_EN BIT(11) +#define ADIN1300_DOWNSPEED_AN_10_EN BIT(10) +#define ADIN1300_GROUP_MDIO_EN BIT(6) +#define ADIN1300_DOWNSPEEDS_EN \ + (ADIN1300_DOWNSPEED_AN_100_EN | ADIN1300_DOWNSPEED_AN_10_EN) + +#define ADIN1300_PHY_CTRL3 0x0017 +#define ADIN1300_LINKING_EN BIT(13) +#define ADIN1300_DOWNSPEED_RETRIES_MSK GENMASK(12, 10) + +#define ADIN1300_INT_MASK_REG 0x0018 +#define ADIN1300_INT_MDIO_SYNC_EN BIT(9) +#define ADIN1300_INT_ANEG_STAT_CHNG_EN BIT(8) +#define ADIN1300_INT_ANEG_PAGE_RX_EN BIT(6) +#define ADIN1300_INT_IDLE_ERR_CNT_EN BIT(5) +#define ADIN1300_INT_MAC_FIFO_OU_EN BIT(4) +#define ADIN1300_INT_RX_STAT_CHNG_EN BIT(3) +#define ADIN1300_INT_LINK_STAT_CHNG_EN BIT(2) +#define ADIN1300_INT_SPEED_CHNG_EN BIT(1) +#define ADIN1300_INT_HW_IRQ_EN BIT(0) +#define ADIN1300_INT_MASK_EN \ + (ADIN1300_INT_LINK_STAT_CHNG_EN | ADIN1300_INT_HW_IRQ_EN) +#define ADIN1300_INT_STATUS_REG 0x0019 + +#define ADIN1300_PHY_STATUS1 0x001a +#define ADIN1300_PAIR_01_SWAP BIT(11) + +/* EEE register addresses, accessible via Clause 22 access using + * ADIN1300_MII_EXT_REG_PTR & ADIN1300_MII_EXT_REG_DATA. + * The bit-fields are the same as specified by IEEE for EEE. + */ +#define ADIN1300_EEE_CAP_REG 0x8000 +#define ADIN1300_EEE_ADV_REG 0x8001 +#define ADIN1300_EEE_LPABLE_REG 0x8002 +#define ADIN1300_CLOCK_STOP_REG 0x9400 +#define ADIN1300_LPI_WAKE_ERR_CNT_REG 0xa000 + +#define ADIN1300_GE_SOFT_RESET_REG 0xff0c +#define ADIN1300_GE_SOFT_RESET BIT(0) + +#define ADIN1300_GE_RGMII_CFG_REG 0xff23 +#define ADIN1300_GE_RGMII_RX_MSK GENMASK(8, 6) +#define ADIN1300_GE_RGMII_RX_SEL(x) \ + FIELD_PREP(ADIN1300_GE_RGMII_RX_MSK, x) +#define ADIN1300_GE_RGMII_GTX_MSK GENMASK(5, 3) +#define ADIN1300_GE_RGMII_GTX_SEL(x) \ + FIELD_PREP(ADIN1300_GE_RGMII_GTX_MSK, x) +#define ADIN1300_GE_RGMII_RXID_EN BIT(2) +#define ADIN1300_GE_RGMII_TXID_EN BIT(1) +#define ADIN1300_GE_RGMII_EN BIT(0) + +/* RGMII internal delay settings for rx and tx for ADIN1300 */ +#define ADIN1300_RGMII_1_60_NS 0x0001 +#define ADIN1300_RGMII_1_80_NS 0x0002 +#define ADIN1300_RGMII_2_00_NS 0x0000 +#define ADIN1300_RGMII_2_20_NS 0x0006 +#define ADIN1300_RGMII_2_40_NS 0x0007 + +#define ADIN1300_GE_RMII_CFG_REG 0xff24 +#define ADIN1300_GE_RMII_FIFO_DEPTH_MSK GENMASK(6, 4) +#define ADIN1300_GE_RMII_FIFO_DEPTH_SEL(x) \ + FIELD_PREP(ADIN1300_GE_RMII_FIFO_DEPTH_MSK, x) +#define ADIN1300_GE_RMII_EN BIT(0) + +/* RMII fifo depth values */ +#define ADIN1300_RMII_4_BITS 0x0000 +#define ADIN1300_RMII_8_BITS 0x0001 +#define ADIN1300_RMII_12_BITS 0x0002 +#define ADIN1300_RMII_16_BITS 0x0003 +#define ADIN1300_RMII_20_BITS 0x0004 +#define ADIN1300_RMII_24_BITS 0x0005 + +/** + * struct adin_cfg_reg_map - map a config value to aregister value + * @cfg value in device configuration + * @reg value in the register + */ +struct adin_cfg_reg_map { + int cfg; + int reg; +}; + +static const struct adin_cfg_reg_map adin_rgmii_delays[] = { + { 1600, ADIN1300_RGMII_1_60_NS }, + { 1800, ADIN1300_RGMII_1_80_NS }, + { 2000, ADIN1300_RGMII_2_00_NS }, + { 2200, ADIN1300_RGMII_2_20_NS }, + { 2400, ADIN1300_RGMII_2_40_NS }, + { }, +}; + +static const struct adin_cfg_reg_map adin_rmii_fifo_depths[] = { + { 4, ADIN1300_RMII_4_BITS }, + { 8, ADIN1300_RMII_8_BITS }, + { 12, ADIN1300_RMII_12_BITS }, + { 16, ADIN1300_RMII_16_BITS }, + { 20, ADIN1300_RMII_20_BITS }, + { 24, ADIN1300_RMII_24_BITS }, + { }, +}; + +/** + * struct adin_clause45_mmd_map - map to convert Clause 45 regs to Clause 22 + * @devad device address used in Clause 45 access + * @cl45_regnum register address defined by Clause 45 + * @adin_regnum equivalent register address accessible via Clause 22 + */ +struct adin_clause45_mmd_map { + int devad; + u16 cl45_regnum; + u16 adin_regnum; +}; + +static struct adin_clause45_mmd_map adin_clause45_mmd_map[] = { + { MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE, ADIN1300_EEE_CAP_REG }, + { MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, ADIN1300_EEE_LPABLE_REG }, + { MDIO_MMD_AN, MDIO_AN_EEE_ADV, ADIN1300_EEE_ADV_REG }, + { MDIO_MMD_PCS, MDIO_CTRL1, ADIN1300_CLOCK_STOP_REG }, + { MDIO_MMD_PCS, MDIO_PCS_EEE_WK_ERR, ADIN1300_LPI_WAKE_ERR_CNT_REG }, +}; + +struct adin_hw_stat { + const char *string; + u16 reg1; + u16 reg2; +}; + +static struct adin_hw_stat adin_hw_stats[] = { + { "total_frames_checked_count", 0x940A, 0x940B }, /* hi + lo */ + { "length_error_frames_count", 0x940C }, + { "alignment_error_frames_count", 0x940D }, + { "symbol_error_count", 0x940E }, + { "oversized_frames_count", 0x940F }, + { "undersized_frames_count", 0x9410 }, + { "odd_nibble_frames_count", 0x9411 }, + { "odd_preamble_packet_count", 0x9412 }, + { "dribble_bits_frames_count", 0x9413 }, + { "false_carrier_events_count", 0x9414 }, +}; + +/** + * struct adin_priv - ADIN PHY driver private data + * stats statistic counters for the PHY + */ +struct adin_priv { + u64 stats[ARRAY_SIZE(adin_hw_stats)]; +}; + +static int adin_lookup_reg_value(const struct adin_cfg_reg_map *tbl, int cfg) +{ + size_t i; + + for (i = 0; tbl[i].cfg; i++) { + if (tbl[i].cfg == cfg) + return tbl[i].reg; + } + + return -EINVAL; +} + +static u32 adin_get_reg_value(struct phy_device *phydev, + const char *prop_name, + const struct adin_cfg_reg_map *tbl, + u32 dflt) +{ + struct device *dev = &phydev->mdio.dev; + u32 val; + int rc; + + if (device_property_read_u32(dev, prop_name, &val)) + return dflt; + + rc = adin_lookup_reg_value(tbl, val); + if (rc < 0) { + phydev_warn(phydev, + "Unsupported value %u for %s using default (%u)\n", + val, prop_name, dflt); + return dflt; + } + + return rc; +} + +static int adin_config_rgmii_mode(struct phy_device *phydev) +{ + u32 val; + int reg; + + if (!phy_interface_is_rgmii(phydev)) + return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_RGMII_CFG_REG, + ADIN1300_GE_RGMII_EN); + + reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RGMII_CFG_REG); + if (reg < 0) + return reg; + + reg |= ADIN1300_GE_RGMII_EN; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) { + reg |= ADIN1300_GE_RGMII_RXID_EN; + + val = adin_get_reg_value(phydev, "adi,rx-internal-delay-ps", + adin_rgmii_delays, + ADIN1300_RGMII_2_00_NS); + reg &= ~ADIN1300_GE_RGMII_RX_MSK; + reg |= ADIN1300_GE_RGMII_RX_SEL(val); + } else { + reg &= ~ADIN1300_GE_RGMII_RXID_EN; + } + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID || + phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) { + reg |= ADIN1300_GE_RGMII_TXID_EN; + + val = adin_get_reg_value(phydev, "adi,tx-internal-delay-ps", + adin_rgmii_delays, + ADIN1300_RGMII_2_00_NS); + reg &= ~ADIN1300_GE_RGMII_GTX_MSK; + reg |= ADIN1300_GE_RGMII_GTX_SEL(val); + } else { + reg &= ~ADIN1300_GE_RGMII_TXID_EN; + } + + return phy_write_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_RGMII_CFG_REG, reg); +} + +static int adin_config_rmii_mode(struct phy_device *phydev) +{ + u32 val; + int reg; + + if (phydev->interface != PHY_INTERFACE_MODE_RMII) + return phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_RMII_CFG_REG, + ADIN1300_GE_RMII_EN); + + reg = phy_read_mmd(phydev, MDIO_MMD_VEND1, ADIN1300_GE_RMII_CFG_REG); + if (reg < 0) + return reg; + + reg |= ADIN1300_GE_RMII_EN; + + val = adin_get_reg_value(phydev, "adi,fifo-depth-bits", + adin_rmii_fifo_depths, + ADIN1300_RMII_8_BITS); + + reg &= ~ADIN1300_GE_RMII_FIFO_DEPTH_MSK; + reg |= ADIN1300_GE_RMII_FIFO_DEPTH_SEL(val); + + return phy_write_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_RMII_CFG_REG, reg); +} + +static int adin_get_downshift(struct phy_device *phydev, u8 *data) +{ + int val, cnt, enable; + + val = phy_read(phydev, ADIN1300_PHY_CTRL2); + if (val < 0) + return val; + + cnt = phy_read(phydev, ADIN1300_PHY_CTRL3); + if (cnt < 0) + return cnt; + + enable = FIELD_GET(ADIN1300_DOWNSPEEDS_EN, val); + cnt = FIELD_GET(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt); + + *data = (enable && cnt) ? cnt : DOWNSHIFT_DEV_DISABLE; + + return 0; +} + +static int adin_set_downshift(struct phy_device *phydev, u8 cnt) +{ + u16 val; + int rc; + + if (cnt == DOWNSHIFT_DEV_DISABLE) + return phy_clear_bits(phydev, ADIN1300_PHY_CTRL2, + ADIN1300_DOWNSPEEDS_EN); + + if (cnt > 7) + return -E2BIG; + + val = FIELD_PREP(ADIN1300_DOWNSPEED_RETRIES_MSK, cnt); + val |= ADIN1300_LINKING_EN; + + rc = phy_modify(phydev, ADIN1300_PHY_CTRL3, + ADIN1300_LINKING_EN | ADIN1300_DOWNSPEED_RETRIES_MSK, + val); + if (rc < 0) + return rc; + + return phy_set_bits(phydev, ADIN1300_PHY_CTRL2, + ADIN1300_DOWNSPEEDS_EN); +} + +static int adin_get_edpd(struct phy_device *phydev, u16 *tx_interval) +{ + int val; + + val = phy_read(phydev, ADIN1300_PHY_CTRL_STATUS2); + if (val < 0) + return val; + + if (ADIN1300_NRG_PD_EN & val) { + if (val & ADIN1300_NRG_PD_TX_EN) + /* default is 1 second */ + *tx_interval = ETHTOOL_PHY_EDPD_DFLT_TX_MSECS; + else + *tx_interval = ETHTOOL_PHY_EDPD_NO_TX; + } else { + *tx_interval = ETHTOOL_PHY_EDPD_DISABLE; + } + + return 0; +} + +static int adin_set_edpd(struct phy_device *phydev, u16 tx_interval) +{ + u16 val; + + if (tx_interval == ETHTOOL_PHY_EDPD_DISABLE) + return phy_clear_bits(phydev, ADIN1300_PHY_CTRL_STATUS2, + (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN)); + + val = ADIN1300_NRG_PD_EN; + + switch (tx_interval) { + case 1000: /* 1 second */ + /* fallthrough */ + case ETHTOOL_PHY_EDPD_DFLT_TX_MSECS: + val |= ADIN1300_NRG_PD_TX_EN; + /* fallthrough */ + case ETHTOOL_PHY_EDPD_NO_TX: + break; + default: + return -EINVAL; + } + + return phy_modify(phydev, ADIN1300_PHY_CTRL_STATUS2, + (ADIN1300_NRG_PD_EN | ADIN1300_NRG_PD_TX_EN), + val); +} + +static int adin_get_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return adin_get_downshift(phydev, data); + case ETHTOOL_PHY_EDPD: + return adin_get_edpd(phydev, data); + default: + return -EOPNOTSUPP; + } +} + +static int adin_set_tunable(struct phy_device *phydev, + struct ethtool_tunable *tuna, const void *data) +{ + switch (tuna->id) { + case ETHTOOL_PHY_DOWNSHIFT: + return adin_set_downshift(phydev, *(const u8 *)data); + case ETHTOOL_PHY_EDPD: + return adin_set_edpd(phydev, *(const u16 *)data); + default: + return -EOPNOTSUPP; + } +} + +static int adin_config_init(struct phy_device *phydev) +{ + int rc; + + phydev->mdix_ctrl = ETH_TP_MDI_AUTO; + + rc = adin_config_rgmii_mode(phydev); + if (rc < 0) + return rc; + + rc = adin_config_rmii_mode(phydev); + if (rc < 0) + return rc; + + rc = adin_set_downshift(phydev, 4); + if (rc < 0) + return rc; + + rc = adin_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS); + if (rc < 0) + return rc; + + phydev_dbg(phydev, "PHY is using mode '%s'\n", + phy_modes(phydev->interface)); + + return 0; +} + +static int adin_phy_ack_intr(struct phy_device *phydev) +{ + /* Clear pending interrupts */ + int rc = phy_read(phydev, ADIN1300_INT_STATUS_REG); + + return rc < 0 ? rc : 0; +} + +static int adin_phy_config_intr(struct phy_device *phydev) +{ + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + return phy_set_bits(phydev, ADIN1300_INT_MASK_REG, + ADIN1300_INT_MASK_EN); + + return phy_clear_bits(phydev, ADIN1300_INT_MASK_REG, + ADIN1300_INT_MASK_EN); +} + +static int adin_cl45_to_adin_reg(struct phy_device *phydev, int devad, + u16 cl45_regnum) +{ + struct adin_clause45_mmd_map *m; + int i; + + if (devad == MDIO_MMD_VEND1) + return cl45_regnum; + + for (i = 0; i < ARRAY_SIZE(adin_clause45_mmd_map); i++) { + m = &adin_clause45_mmd_map[i]; + if (m->devad == devad && m->cl45_regnum == cl45_regnum) + return m->adin_regnum; + } + + phydev_err(phydev, + "No translation available for devad: %d reg: %04x\n", + devad, cl45_regnum); + + return -EINVAL; +} + +static int adin_read_mmd(struct phy_device *phydev, int devad, u16 regnum) +{ + struct mii_bus *bus = phydev->mdio.bus; + int phy_addr = phydev->mdio.addr; + int adin_regnum; + int err; + + adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum); + if (adin_regnum < 0) + return adin_regnum; + + err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, + adin_regnum); + if (err) + return err; + + return __mdiobus_read(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA); +} + +static int adin_write_mmd(struct phy_device *phydev, int devad, u16 regnum, + u16 val) +{ + struct mii_bus *bus = phydev->mdio.bus; + int phy_addr = phydev->mdio.addr; + int adin_regnum; + int err; + + adin_regnum = adin_cl45_to_adin_reg(phydev, devad, regnum); + if (adin_regnum < 0) + return adin_regnum; + + err = __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_PTR, + adin_regnum); + if (err) + return err; + + return __mdiobus_write(bus, phy_addr, ADIN1300_MII_EXT_REG_DATA, val); +} + +static int adin_config_mdix(struct phy_device *phydev) +{ + bool auto_en, mdix_en; + int reg; + + mdix_en = false; + auto_en = false; + switch (phydev->mdix_ctrl) { + case ETH_TP_MDI: + break; + case ETH_TP_MDI_X: + mdix_en = true; + break; + case ETH_TP_MDI_AUTO: + auto_en = true; + break; + default: + return -EINVAL; + } + + reg = phy_read(phydev, ADIN1300_PHY_CTRL1); + if (reg < 0) + return reg; + + if (mdix_en) + reg |= ADIN1300_MAN_MDIX_EN; + else + reg &= ~ADIN1300_MAN_MDIX_EN; + + if (auto_en) + reg |= ADIN1300_AUTO_MDI_EN; + else + reg &= ~ADIN1300_AUTO_MDI_EN; + + return phy_write(phydev, ADIN1300_PHY_CTRL1, reg); +} + +static int adin_config_aneg(struct phy_device *phydev) +{ + int ret; + + ret = adin_config_mdix(phydev); + if (ret) + return ret; + + return genphy_config_aneg(phydev); +} + +static int adin_mdix_update(struct phy_device *phydev) +{ + bool auto_en, mdix_en; + bool swapped; + int reg; + + reg = phy_read(phydev, ADIN1300_PHY_CTRL1); + if (reg < 0) + return reg; + + auto_en = !!(reg & ADIN1300_AUTO_MDI_EN); + mdix_en = !!(reg & ADIN1300_MAN_MDIX_EN); + + /* If MDI/MDIX is forced, just read it from the control reg */ + if (!auto_en) { + if (mdix_en) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + return 0; + } + + /** + * Otherwise, we need to deduce it from the PHY status2 reg. + * When Auto-MDI is enabled, the ADIN1300_MAN_MDIX_EN bit implies + * a preference for MDIX when it is set. + */ + reg = phy_read(phydev, ADIN1300_PHY_STATUS1); + if (reg < 0) + return reg; + + swapped = !!(reg & ADIN1300_PAIR_01_SWAP); + + if (mdix_en != swapped) + phydev->mdix = ETH_TP_MDI_X; + else + phydev->mdix = ETH_TP_MDI; + + return 0; +} + +static int adin_read_status(struct phy_device *phydev) +{ + int ret; + + ret = adin_mdix_update(phydev); + if (ret < 0) + return ret; + + return genphy_read_status(phydev); +} + +static int adin_soft_reset(struct phy_device *phydev) +{ + int rc; + + /* The reset bit is self-clearing, set it and wait */ + rc = phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_SOFT_RESET_REG, + ADIN1300_GE_SOFT_RESET); + if (rc < 0) + return rc; + + msleep(10); + + /* If we get a read error something may be wrong */ + rc = phy_read_mmd(phydev, MDIO_MMD_VEND1, + ADIN1300_GE_SOFT_RESET_REG); + + return rc < 0 ? rc : 0; +} + +static int adin_get_sset_count(struct phy_device *phydev) +{ + return ARRAY_SIZE(adin_hw_stats); +} + +static void adin_get_strings(struct phy_device *phydev, u8 *data) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) { + strlcpy(&data[i * ETH_GSTRING_LEN], + adin_hw_stats[i].string, ETH_GSTRING_LEN); + } +} + +static int adin_read_mmd_stat_regs(struct phy_device *phydev, + struct adin_hw_stat *stat, + u32 *val) +{ + int ret; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg1); + if (ret < 0) + return ret; + + *val = (ret & 0xffff); + + if (stat->reg2 == 0) + return 0; + + ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, stat->reg2); + if (ret < 0) + return ret; + + *val <<= 16; + *val |= (ret & 0xffff); + + return 0; +} + +static u64 adin_get_stat(struct phy_device *phydev, int i) +{ + struct adin_hw_stat *stat = &adin_hw_stats[i]; + struct adin_priv *priv = phydev->priv; + u32 val; + int ret; + + if (stat->reg1 > 0x1f) { + ret = adin_read_mmd_stat_regs(phydev, stat, &val); + if (ret < 0) + return (u64)(~0); + } else { + ret = phy_read(phydev, stat->reg1); + if (ret < 0) + return (u64)(~0); + val = (ret & 0xffff); + } + + priv->stats[i] += val; + + return priv->stats[i]; +} + +static void adin_get_stats(struct phy_device *phydev, + struct ethtool_stats *stats, u64 *data) +{ + int i, rc; + + /* latch copies of all the frame-checker counters */ + rc = phy_read(phydev, ADIN1300_RX_ERR_CNT); + if (rc < 0) + return; + + for (i = 0; i < ARRAY_SIZE(adin_hw_stats); i++) + data[i] = adin_get_stat(phydev, i); +} + +static int adin_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct adin_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + phydev->priv = priv; + + return 0; +} + +static struct phy_driver adin_driver[] = { + { + PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200), + .name = "ADIN1200", + .probe = adin_probe, + .config_init = adin_config_init, + .soft_reset = adin_soft_reset, + .config_aneg = adin_config_aneg, + .read_status = adin_read_status, + .get_tunable = adin_get_tunable, + .set_tunable = adin_set_tunable, + .ack_interrupt = adin_phy_ack_intr, + .config_intr = adin_phy_config_intr, + .get_sset_count = adin_get_sset_count, + .get_strings = adin_get_strings, + .get_stats = adin_get_stats, + .resume = genphy_resume, + .suspend = genphy_suspend, + .read_mmd = adin_read_mmd, + .write_mmd = adin_write_mmd, + }, + { + PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300), + .name = "ADIN1300", + .probe = adin_probe, + .config_init = adin_config_init, + .soft_reset = adin_soft_reset, + .config_aneg = adin_config_aneg, + .read_status = adin_read_status, + .get_tunable = adin_get_tunable, + .set_tunable = adin_set_tunable, + .ack_interrupt = adin_phy_ack_intr, + .config_intr = adin_phy_config_intr, + .get_sset_count = adin_get_sset_count, + .get_strings = adin_get_strings, + .get_stats = adin_get_stats, + .resume = genphy_resume, + .suspend = genphy_suspend, + .read_mmd = adin_read_mmd, + .write_mmd = adin_write_mmd, + }, +}; + +module_phy_driver(adin_driver); + +static struct mdio_device_id __maybe_unused adin_tbl[] = { + { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1200) }, + { PHY_ID_MATCH_MODEL(PHY_ID_ADIN1300) }, + { } +}; + +MODULE_DEVICE_TABLE(mdio, adin_tbl); +MODULE_DESCRIPTION("Analog Devices Industrial Ethernet PHY driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c index 6ad8b1c63c34..2aa7b2e60046 100644 --- a/drivers/net/phy/at803x.c +++ b/drivers/net/phy/at803x.c @@ -249,10 +249,6 @@ static int at803x_config_init(struct phy_device *phydev) { int ret; - ret = genphy_config_init(phydev); - if (ret < 0) - return ret; - /* The RX and TX delay default is: * after HW reset: RX delay enabled and TX delay disabled * after SW reset: RX delay enabled, while TX delay retains the diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c index 7ed4760fb155..8a4b1d167ce2 100644 --- a/drivers/net/phy/dp83822.c +++ b/drivers/net/phy/dp83822.c @@ -254,13 +254,8 @@ static int dp83822_config_intr(struct phy_device *phydev) static int dp83822_config_init(struct phy_device *phydev) { - int err; int value; - err = genphy_config_init(phydev); - if (err < 0) - return err; - value = DP83822_WOL_MAGIC_EN | DP83822_WOL_SECURE_ON | DP83822_WOL_EN; return phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c index 6f9bc7d91f17..54c7c1b44e4d 100644 --- a/drivers/net/phy/dp83848.c +++ b/drivers/net/phy/dp83848.c @@ -68,13 +68,8 @@ static int dp83848_config_intr(struct phy_device *phydev) static int dp83848_config_init(struct phy_device *phydev) { - int err; int val; - err = genphy_config_init(phydev); - if (err < 0) - return err; - /* DP83620 always reports Auto Negotiation Ability on BMSR. Instead, * we check initial value of BMCR Auto negotiation enable bit */ @@ -113,13 +108,13 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl); static struct phy_driver dp83848_driver[] = { DP83848_PHY_DRIVER(TI_DP83848C_PHY_ID, "TI DP83848C 10/100 Mbps PHY", - genphy_config_init), + NULL), DP83848_PHY_DRIVER(NS_DP83848C_PHY_ID, "NS DP83848C 10/100 Mbps PHY", - genphy_config_init), + NULL), DP83848_PHY_DRIVER(TI_DP83620_PHY_ID, "TI DP83620 10/100 Mbps PHY", dp83848_config_init), DP83848_PHY_DRIVER(TLK10X_PHY_ID, "TI TLK10X 10/100 Mbps PHY", - genphy_config_init), + NULL), }; module_phy_driver(dp83848_driver); diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 1f1ecee0ee2f..37fceaf9fa10 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -37,6 +37,7 @@ #define DP83867_STRAP_STS2 0x006f #define DP83867_RGMIIDCTL 0x0086 #define DP83867_IO_MUX_CFG 0x0170 +#define DP83867_SGMIICTL 0x00D3 #define DP83867_10M_SGMII_CFG 0x016F #define DP83867_10M_SGMII_RATE_ADAPT_MASK BIT(7) @@ -61,6 +62,9 @@ #define DP83867_RGMII_TX_CLK_DELAY_EN BIT(1) #define DP83867_RGMII_RX_CLK_DELAY_EN BIT(0) +/* SGMIICTL bits */ +#define DP83867_SGMII_TYPE BIT(14) + /* STRAP_STS1 bits */ #define DP83867_STRAP_STS1_RESERVED BIT(11) @@ -109,6 +113,7 @@ struct dp83867_private { bool rxctrl_strap_quirk; bool set_clk_output; u32 clk_output_sel; + bool sgmii_ref_clk_en; }; static int dp83867_ack_interrupt(struct phy_device *phydev) @@ -197,6 +202,9 @@ static int dp83867_of_init(struct phy_device *phydev) dp83867->rxctrl_strap_quirk = of_property_read_bool(of_node, "ti,dp83867-rxctrl-strap-quirk"); + dp83867->sgmii_ref_clk_en = of_property_read_bool(of_node, + "ti,sgmii-ref-clock-output-enable"); + /* Existing behavior was to use default pin strapping delay in rgmii * mode, but rgmii should have meant no delay. Warn existing users. */ @@ -389,6 +397,17 @@ static int dp83867_config_init(struct phy_device *phydev) if (ret) return ret; + + val = phy_read_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL); + /* SGMII type is set to 4-wire mode by default. + * If we place appropriate property in dts (see above) + * switch on 6-wire mode. + */ + if (dp83867->sgmii_ref_clk_en) + val |= DP83867_SGMII_TYPE; + else + val &= ~DP83867_SGMII_TYPE; + phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, val); } /* Enable Interrupt output INT_OE in CFG3 register */ diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c index ac27da16824d..06f08832ebcd 100644 --- a/drivers/net/phy/dp83tc811.c +++ b/drivers/net/phy/dp83tc811.c @@ -277,10 +277,6 @@ static int dp83811_config_init(struct phy_device *phydev) { int value, err; - err = genphy_config_init(phydev); - if (err < 0) - return err; - value = phy_read(phydev, MII_DP83811_SGMII_CTRL); if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { err = phy_write(phydev, MII_DP83811_SGMII_CTRL, diff --git a/drivers/net/phy/mdio-aspeed.c b/drivers/net/phy/mdio-aspeed.c new file mode 100644 index 000000000000..cad820568f75 --- /dev/null +++ b/drivers/net/phy/mdio-aspeed.c @@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* Copyright (C) 2019 IBM Corp. */ + +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include <linux/mdio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_mdio.h> +#include <linux/phy.h> +#include <linux/platform_device.h> + +#define DRV_NAME "mdio-aspeed" + +#define ASPEED_MDIO_CTRL 0x0 +#define ASPEED_MDIO_CTRL_FIRE BIT(31) +#define ASPEED_MDIO_CTRL_ST BIT(28) +#define ASPEED_MDIO_CTRL_ST_C45 0 +#define ASPEED_MDIO_CTRL_ST_C22 1 +#define ASPEED_MDIO_CTRL_OP GENMASK(27, 26) +#define MDIO_C22_OP_WRITE 0b01 +#define MDIO_C22_OP_READ 0b10 +#define ASPEED_MDIO_CTRL_PHYAD GENMASK(25, 21) +#define ASPEED_MDIO_CTRL_REGAD GENMASK(20, 16) +#define ASPEED_MDIO_CTRL_MIIWDATA GENMASK(15, 0) + +#define ASPEED_MDIO_DATA 0x4 +#define ASPEED_MDIO_DATA_MDC_THRES GENMASK(31, 24) +#define ASPEED_MDIO_DATA_MDIO_EDGE BIT(23) +#define ASPEED_MDIO_DATA_MDIO_LATCH GENMASK(22, 20) +#define ASPEED_MDIO_DATA_IDLE BIT(16) +#define ASPEED_MDIO_DATA_MIIRDATA GENMASK(15, 0) + +#define ASPEED_MDIO_INTERVAL_US 100 +#define ASPEED_MDIO_TIMEOUT_US (ASPEED_MDIO_INTERVAL_US * 10) + +struct aspeed_mdio { + void __iomem *base; +}; + +static int aspeed_mdio_read(struct mii_bus *bus, int addr, int regnum) +{ + struct aspeed_mdio *ctx = bus->priv; + u32 ctrl; + u32 data; + int rc; + + dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d\n", __func__, addr, + regnum); + + /* Just clause 22 for the moment */ + if (regnum & MII_ADDR_C45) + return -EOPNOTSUPP; + + ctrl = ASPEED_MDIO_CTRL_FIRE + | FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22) + | FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_READ) + | FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr) + | FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regnum); + + iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL); + + rc = readl_poll_timeout(ctx->base + ASPEED_MDIO_DATA, data, + data & ASPEED_MDIO_DATA_IDLE, + ASPEED_MDIO_INTERVAL_US, + ASPEED_MDIO_TIMEOUT_US); + if (rc < 0) + return rc; + + return FIELD_GET(ASPEED_MDIO_DATA_MIIRDATA, data); +} + +static int aspeed_mdio_write(struct mii_bus *bus, int addr, int regnum, u16 val) +{ + struct aspeed_mdio *ctx = bus->priv; + u32 ctrl; + + dev_dbg(&bus->dev, "%s: addr: %d, regnum: %d, val: 0x%x\n", + __func__, addr, regnum, val); + + /* Just clause 22 for the moment */ + if (regnum & MII_ADDR_C45) + return -EOPNOTSUPP; + + ctrl = ASPEED_MDIO_CTRL_FIRE + | FIELD_PREP(ASPEED_MDIO_CTRL_ST, ASPEED_MDIO_CTRL_ST_C22) + | FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_WRITE) + | FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr) + | FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, regnum) + | FIELD_PREP(ASPEED_MDIO_CTRL_MIIWDATA, val); + + iowrite32(ctrl, ctx->base + ASPEED_MDIO_CTRL); + + return readl_poll_timeout(ctx->base + ASPEED_MDIO_CTRL, ctrl, + !(ctrl & ASPEED_MDIO_CTRL_FIRE), + ASPEED_MDIO_INTERVAL_US, + ASPEED_MDIO_TIMEOUT_US); +} + +static int aspeed_mdio_probe(struct platform_device *pdev) +{ + struct aspeed_mdio *ctx; + struct mii_bus *bus; + int rc; + + bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*ctx)); + if (!bus) + return -ENOMEM; + + ctx = bus->priv; + ctx->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(ctx->base)) + return PTR_ERR(ctx->base); + + bus->name = DRV_NAME; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s%d", pdev->name, pdev->id); + bus->parent = &pdev->dev; + bus->read = aspeed_mdio_read; + bus->write = aspeed_mdio_write; + + rc = of_mdiobus_register(bus, pdev->dev.of_node); + if (rc) { + dev_err(&pdev->dev, "Cannot register MDIO bus!\n"); + return rc; + } + + platform_set_drvdata(pdev, bus); + + return 0; +} + +static int aspeed_mdio_remove(struct platform_device *pdev) +{ + mdiobus_unregister(platform_get_drvdata(pdev)); + + return 0; +} + +static const struct of_device_id aspeed_mdio_of_match[] = { + { .compatible = "aspeed,ast2600-mdio", }, + { }, +}; + +static struct platform_driver aspeed_mdio_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = aspeed_mdio_of_match, + }, + .probe = aspeed_mdio_probe, + .remove = aspeed_mdio_remove, +}; + +module_platform_driver(aspeed_mdio_driver); + +MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/phy/mdio-bcm-iproc.c b/drivers/net/phy/mdio-bcm-iproc.c index 7d0f388d8db8..7e9975d25066 100644 --- a/drivers/net/phy/mdio-bcm-iproc.c +++ b/drivers/net/phy/mdio-bcm-iproc.c @@ -123,15 +123,13 @@ static int iproc_mdio_probe(struct platform_device *pdev) { struct iproc_mdio_priv *priv; struct mii_bus *bus; - struct resource *res; int rc; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->base = devm_ioremap_resource(&pdev->dev, res); + priv->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->base)) { dev_err(&pdev->dev, "failed to ioremap register\n"); return PTR_ERR(priv->base); diff --git a/drivers/net/phy/mdio-cavium.h b/drivers/net/phy/mdio-cavium.h index ed5f9bb5448d..b7f89ad27465 100644 --- a/drivers/net/phy/mdio-cavium.h +++ b/drivers/net/phy/mdio-cavium.h @@ -108,6 +108,8 @@ static inline u64 oct_mdio_readq(u64 addr) return cvmx_read_csr(addr); } #else +#include <linux/io-64-nonatomic-lo-hi.h> + #define oct_mdio_writeq(val, addr) writeq(val, (void *)addr) #define oct_mdio_readq(addr) readq((void *)addr) #endif diff --git a/drivers/net/phy/mdio-hisi-femac.c b/drivers/net/phy/mdio-hisi-femac.c index 287f3ccf1da1..f231c2fbb1de 100644 --- a/drivers/net/phy/mdio-hisi-femac.c +++ b/drivers/net/phy/mdio-hisi-femac.c @@ -74,7 +74,6 @@ static int hisi_femac_mdio_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct mii_bus *bus; struct hisi_femac_mdio_data *data; - struct resource *res; int ret; bus = mdiobus_alloc_size(sizeof(*data)); @@ -88,8 +87,7 @@ static int hisi_femac_mdio_probe(struct platform_device *pdev) bus->parent = &pdev->dev; data = bus->priv; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data->membase = devm_ioremap_resource(&pdev->dev, res); + data->membase = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(data->membase)) { ret = PTR_ERR(data->membase); goto err_out_free_mdiobus; diff --git a/drivers/net/phy/mdio-moxart.c b/drivers/net/phy/mdio-moxart.c index af3910fe8ec7..2d16fc4173c1 100644 --- a/drivers/net/phy/mdio-moxart.c +++ b/drivers/net/phy/mdio-moxart.c @@ -113,7 +113,6 @@ static int moxart_mdio_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct mii_bus *bus; struct moxart_mdio_data *data; - struct resource *res; int ret, i; bus = mdiobus_alloc_size(sizeof(*data)); @@ -138,8 +137,7 @@ static int moxart_mdio_probe(struct platform_device *pdev) bus->irq[i] = PHY_IGNORE_INTERRUPT; data = bus->priv; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data->base = devm_ioremap_resource(&pdev->dev, res); + data->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(data->base)) { ret = PTR_ERR(data->base); goto err_out_free_mdiobus; diff --git a/drivers/net/phy/mdio-mux-meson-g12a.c b/drivers/net/phy/mdio-mux-meson-g12a.c index 6644762ff2ab..7a9ad54582e1 100644 --- a/drivers/net/phy/mdio-mux-meson-g12a.c +++ b/drivers/net/phy/mdio-mux-meson-g12a.c @@ -302,7 +302,6 @@ static int g12a_mdio_mux_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct g12a_mdio_mux *priv; - struct resource *res; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); @@ -311,8 +310,7 @@ static int g12a_mdio_mux_probe(struct platform_device *pdev) platform_set_drvdata(pdev, priv); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->regs = devm_ioremap_resource(dev, res); + priv->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(priv->regs)) return PTR_ERR(priv->regs); diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c index 20ffd8fb79ce..58d6504495e0 100644 --- a/drivers/net/phy/mdio-sun4i.c +++ b/drivers/net/phy/mdio-sun4i.c @@ -92,7 +92,6 @@ static int sun4i_mdio_probe(struct platform_device *pdev) struct device_node *np = pdev->dev.of_node; struct mii_bus *bus; struct sun4i_mdio_data *data; - struct resource *res; int ret; bus = mdiobus_alloc_size(sizeof(*data)); @@ -106,8 +105,7 @@ static int sun4i_mdio_probe(struct platform_device *pdev) bus->parent = &pdev->dev; data = bus->priv; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - data->membase = devm_ioremap_resource(&pdev->dev, res); + data->membase = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(data->membase)) { ret = PTR_ERR(data->membase); goto err_out_free_mdiobus; diff --git a/drivers/net/phy/mdio-xgene.c b/drivers/net/phy/mdio-xgene.c index 717cc2a056e8..34990eaa3298 100644 --- a/drivers/net/phy/mdio-xgene.c +++ b/drivers/net/phy/mdio-xgene.c @@ -328,7 +328,6 @@ static int xgene_mdio_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct mii_bus *mdio_bus; const struct of_device_id *of_id; - struct resource *res; struct xgene_mdio_pdata *pdata; void __iomem *csr_base; int mdio_id = 0, ret = 0; @@ -355,8 +354,7 @@ static int xgene_mdio_probe(struct platform_device *pdev) pdata->mdio_id = mdio_id; pdata->dev = dev; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - csr_base = devm_ioremap_resource(dev, res); + csr_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(csr_base)) return PTR_ERR(csr_base); pdata->mac_csr_addr = csr_base; diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index ce940871331e..2e29ab841b4d 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -42,21 +42,17 @@ static int mdiobus_register_gpiod(struct mdio_device *mdiodev) { - struct gpio_desc *gpiod = NULL; + int error; /* Deassert the optional reset signal */ - if (mdiodev->dev.of_node) - gpiod = fwnode_get_named_gpiod(&mdiodev->dev.of_node->fwnode, - "reset-gpios", 0, GPIOD_OUT_LOW, - "PHY reset"); - if (IS_ERR(gpiod)) { - if (PTR_ERR(gpiod) == -ENOENT || PTR_ERR(gpiod) == -ENOSYS) - gpiod = NULL; - else - return PTR_ERR(gpiod); - } - - mdiodev->reset_gpio = gpiod; + mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev, + "reset", GPIOD_OUT_LOW); + error = PTR_ERR_OR_ZERO(mdiodev->reset_gpio); + if (error) + return error; + + if (mdiodev->reset_gpio) + gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset"); return 0; } diff --git a/drivers/net/phy/meson-gxl.c b/drivers/net/phy/meson-gxl.c index fa80d6dce8ee..e8f2ca625837 100644 --- a/drivers/net/phy/meson-gxl.c +++ b/drivers/net/phy/meson-gxl.c @@ -136,7 +136,7 @@ static int meson_gxl_config_init(struct phy_device *phydev) if (ret) return ret; - return genphy_config_init(phydev); + return 0; } /* This function is provided to cope with the possible failures of this phy diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c index eb1b3287fe08..a644e8e5071c 100644 --- a/drivers/net/phy/microchip.c +++ b/drivers/net/phy/microchip.c @@ -305,7 +305,6 @@ static int lan88xx_config_init(struct phy_device *phydev) { int val; - genphy_config_init(phydev); /*Zerodetect delay enable */ val = phy_read_mmd(phydev, MDIO_MMD_PCS, PHY_ARDENNES_MMD_DEV_3_PHY_CFG); diff --git a/drivers/net/phy/microchip_t1.c b/drivers/net/phy/microchip_t1.c index 3d09b471632c..001def4509c2 100644 --- a/drivers/net/phy/microchip_t1.c +++ b/drivers/net/phy/microchip_t1.c @@ -48,7 +48,6 @@ static struct phy_driver microchip_t1_phy_driver[] = { .features = PHY_BASIC_T1_FEATURES, - .config_init = genphy_config_init, .config_aneg = genphy_config_aneg, .ack_interrupt = lan87xx_phy_ack_interrupt, diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c index 645d354ffb48..7ada1fd9ca71 100644 --- a/drivers/net/phy/mscc.c +++ b/drivers/net/phy/mscc.c @@ -1725,7 +1725,7 @@ static int vsc8584_config_init(struct phy_device *phydev) return ret; } - return genphy_config_init(phydev); + return 0; err: mutex_unlock(&phydev->mdio.bus->mdio_lock); @@ -1767,7 +1767,7 @@ static int vsc85xx_config_init(struct phy_device *phydev) return rc; } - return genphy_config_init(phydev); + return 0; } static int vsc8584_did_interrupt(struct phy_device *phydev) diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c index 16667fbac8bf..369903d9b6ec 100644 --- a/drivers/net/phy/phy-core.c +++ b/drivers/net/phy/phy-core.c @@ -207,14 +207,14 @@ size_t phy_speeds(unsigned int *speeds, size_t size, return count; } -static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) +static int __set_linkmode_max_speed(u32 max_speed, unsigned long *addr) { const struct phy_setting *p; int i; for (i = 0, p = settings; i < ARRAY_SIZE(settings); i++, p++) { if (p->speed > max_speed) - linkmode_clear_bit(p->bit, phydev->supported); + linkmode_clear_bit(p->bit, addr); else break; } @@ -222,6 +222,11 @@ static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) return 0; } +static int __set_phy_supported(struct phy_device *phydev, u32 max_speed) +{ + return __set_linkmode_max_speed(max_speed, phydev->supported); +} + int phy_set_max_speed(struct phy_device *phydev, u32 max_speed) { int err; @@ -310,6 +315,34 @@ void phy_resolve_aneg_linkmode(struct phy_device *phydev) } EXPORT_SYMBOL_GPL(phy_resolve_aneg_linkmode); +static int phy_resolve_min_speed(struct phy_device *phydev, bool fdx_only) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(common); + int i = ARRAY_SIZE(settings); + + linkmode_and(common, phydev->lp_advertising, phydev->advertising); + + while (--i >= 0) { + if (test_bit(settings[i].bit, common)) { + if (fdx_only && settings[i].duplex != DUPLEX_FULL) + continue; + return settings[i].speed; + } + } + + return SPEED_UNKNOWN; +} + +int phy_speed_down_core(struct phy_device *phydev) +{ + int min_common_speed = phy_resolve_min_speed(phydev, true); + + if (min_common_speed == SPEED_UNKNOWN) + return -EINVAL; + + return __set_linkmode_max_speed(min_common_speed, phydev->advertising); +} + static void mmd_phy_indirect(struct mii_bus *bus, int phy_addr, int devad, u16 regnum) { @@ -783,24 +816,43 @@ int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val) EXPORT_SYMBOL(phy_write_paged); /** - * phy_modify_paged() - Convenience function for modifying a paged register + * phy_modify_paged_changed() - Function for modifying a paged register * @phydev: a pointer to a &struct phy_device * @page: the page for the phy * @regnum: register number * @mask: bit mask of bits to clear * @set: bit mask of bits to set * - * Same rules as for phy_read() and phy_write(). + * Returns negative errno, 0 if there was no change, and 1 in case of change */ -int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, - u16 mask, u16 set) +int phy_modify_paged_changed(struct phy_device *phydev, int page, u32 regnum, + u16 mask, u16 set) { int ret = 0, oldpage; oldpage = phy_select_page(phydev, page); if (oldpage >= 0) - ret = __phy_modify(phydev, regnum, mask, set); + ret = __phy_modify_changed(phydev, regnum, mask, set); return phy_restore_page(phydev, oldpage, ret); } +EXPORT_SYMBOL(phy_modify_paged_changed); + +/** + * phy_modify_paged() - Convenience function for modifying a paged register + * @phydev: a pointer to a &struct phy_device + * @page: the page for the phy + * @regnum: register number + * @mask: bit mask of bits to clear + * @set: bit mask of bits to set + * + * Same rules as for phy_read() and phy_write(). + */ +int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum, + u16 mask, u16 set) +{ + int ret = phy_modify_paged_changed(phydev, page, regnum, mask, set); + + return ret < 0 ? ret : 0; +} EXPORT_SYMBOL(phy_modify_paged); diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 6b0f89369b46..7c92afd36bbe 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -525,6 +525,12 @@ static int phy_check_link_status(struct phy_device *phydev) WARN_ON(!mutex_is_locked(&phydev->lock)); + /* Keep previous state if loopback is enabled because some PHYs + * report that Link is Down when loopback is enabled. + */ + if (phydev->loopback_enabled) + return 0; + err = phy_read_status(phydev); if (err) return err; @@ -608,38 +614,21 @@ static int phy_poll_aneg_done(struct phy_device *phydev) */ int phy_speed_down(struct phy_device *phydev, bool sync) { - __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old); - __ETHTOOL_DECLARE_LINK_MODE_MASK(adv); + __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp); int ret; if (phydev->autoneg != AUTONEG_ENABLE) return 0; - linkmode_copy(adv_old, phydev->advertising); - linkmode_copy(adv, phydev->lp_advertising); - linkmode_and(adv, adv, phydev->supported); - - if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, adv) || - linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, adv)) { - linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, - phydev->advertising); - linkmode_clear_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, - phydev->advertising); - linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - phydev->advertising); - linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - phydev->advertising); - } else if (linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, - adv) || - linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, - adv)) { - linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - phydev->advertising); - linkmode_clear_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - phydev->advertising); - } + linkmode_copy(adv_tmp, phydev->advertising); + + ret = phy_speed_down_core(phydev); + if (ret) + return ret; + + linkmode_copy(phydev->adv_old, adv_tmp); - if (linkmode_equal(phydev->advertising, adv_old)) + if (linkmode_equal(phydev->advertising, adv_tmp)) return 0; ret = phy_config_aneg(phydev); @@ -658,30 +647,19 @@ EXPORT_SYMBOL_GPL(phy_speed_down); */ int phy_speed_up(struct phy_device *phydev) { - __ETHTOOL_DECLARE_LINK_MODE_MASK(all_speeds) = { 0, }; - __ETHTOOL_DECLARE_LINK_MODE_MASK(not_speeds); - __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); - __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_old); - __ETHTOOL_DECLARE_LINK_MODE_MASK(speeds); - - linkmode_copy(adv_old, phydev->advertising); + __ETHTOOL_DECLARE_LINK_MODE_MASK(adv_tmp); if (phydev->autoneg != AUTONEG_ENABLE) return 0; - linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, all_speeds); - linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, all_speeds); - linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, all_speeds); - linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, all_speeds); - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, all_speeds); - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, all_speeds); + if (linkmode_empty(phydev->adv_old)) + return 0; - linkmode_andnot(not_speeds, adv_old, all_speeds); - linkmode_copy(supported, phydev->supported); - linkmode_and(speeds, supported, all_speeds); - linkmode_or(phydev->advertising, not_speeds, speeds); + linkmode_copy(adv_tmp, phydev->advertising); + linkmode_copy(phydev->advertising, phydev->adv_old); + linkmode_zero(phydev->adv_old); - if (linkmode_equal(phydev->advertising, adv_old)) + if (linkmode_equal(phydev->advertising, adv_tmp)) return 0; return phy_config_aneg(phydev); @@ -939,8 +917,8 @@ void phy_state_machine(struct work_struct *work) if (phydev->link) { phydev->link = 0; phy_link_down(phydev, true); - do_suspend = true; } + do_suspend = true; break; } diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 27ebc2c6c2d0..d347ddcac45b 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1564,24 +1564,20 @@ EXPORT_SYMBOL(phy_reset_after_clk_enable); */ static int genphy_config_advert(struct phy_device *phydev) { - u32 advertise; - int bmsr, adv; - int err, changed = 0; + int err, bmsr, changed = 0; + u32 adv; /* Only allow advertising what this PHY supports */ linkmode_and(phydev->advertising, phydev->advertising, phydev->supported); - if (!ethtool_convert_link_mode_to_legacy_u32(&advertise, - phydev->advertising)) - phydev_warn(phydev, "PHY advertising (%*pb) more modes than genphy supports, some modes not advertised.\n", - __ETHTOOL_LINK_MODE_MASK_NBITS, - phydev->advertising); + + adv = linkmode_adv_to_mii_adv_t(phydev->advertising); /* Setup standard advertisement */ err = phy_modify_changed(phydev, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM, - ethtool_adv_to_mii_adv_t(advertise)); + adv); if (err < 0) return err; if (err > 0) @@ -1598,13 +1594,7 @@ static int genphy_config_advert(struct phy_device *phydev) if (!(bmsr & BMSR_ESTATEN)) return changed; - /* Configure gigabit if it's supported */ - adv = 0; - if (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - phydev->supported) || - linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - phydev->supported)) - adv = ethtool_adv_to_mii_ctrl1000_t(advertise); + adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising); err = phy_modify_changed(phydev, MII_CTRL1000, ADVERTISE_1000FULL | ADVERTISE_1000HALF, @@ -1681,18 +1671,20 @@ int genphy_restart_aneg(struct phy_device *phydev) EXPORT_SYMBOL(genphy_restart_aneg); /** - * genphy_config_aneg - restart auto-negotiation or write BMCR + * __genphy_config_aneg - restart auto-negotiation or write BMCR * @phydev: target phy_device struct + * @changed: whether autoneg is requested * * Description: If auto-negotiation is enabled, we configure the * advertising, and then restart auto-negotiation. If it is not * enabled, then we write the BMCR. */ -int genphy_config_aneg(struct phy_device *phydev) +int __genphy_config_aneg(struct phy_device *phydev, bool changed) { - int err, changed; + int err; - changed = genphy_config_eee_advert(phydev); + if (genphy_config_eee_advert(phydev)) + changed = true; if (AUTONEG_ENABLE != phydev->autoneg) return genphy_setup_forced(phydev); @@ -1700,10 +1692,10 @@ int genphy_config_aneg(struct phy_device *phydev) err = genphy_config_advert(phydev); if (err < 0) /* error */ return err; + else if (err) + changed = true; - changed |= err; - - if (changed == 0) { + if (!changed) { /* Advertisement hasn't changed, but maybe aneg was never on to * begin with? Or maybe phy was isolated? */ @@ -1713,18 +1705,15 @@ int genphy_config_aneg(struct phy_device *phydev) return ctl; if (!(ctl & BMCR_ANENABLE) || (ctl & BMCR_ISOLATE)) - changed = 1; /* do restart aneg */ + changed = true; /* do restart aneg */ } /* Only restart aneg if we are advertising something different * than we were before. */ - if (changed > 0) - return genphy_restart_aneg(phydev); - - return 0; + return changed ? genphy_restart_aneg(phydev) : 0; } -EXPORT_SYMBOL(genphy_config_aneg); +EXPORT_SYMBOL(__genphy_config_aneg); /** * genphy_aneg_done - return auto-negotiation status @@ -1805,7 +1794,7 @@ EXPORT_SYMBOL(genphy_update_link); */ int genphy_read_status(struct phy_device *phydev) { - int adv, lpa, lpagb, err, old_link = phydev->link; + int lpa, lpagb, err, old_link = phydev->link; /* Update the link, but return if there was an error */ err = genphy_update_link(phydev); @@ -1821,19 +1810,18 @@ int genphy_read_status(struct phy_device *phydev) phydev->pause = 0; phydev->asym_pause = 0; - linkmode_zero(phydev->lp_advertising); - if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) { if (phydev->is_gigabit_capable) { lpagb = phy_read(phydev, MII_STAT1000); if (lpagb < 0) return lpagb; - adv = phy_read(phydev, MII_CTRL1000); - if (adv < 0) - return adv; - if (lpagb & LPA_1000MSFAIL) { + int adv = phy_read(phydev, MII_CTRL1000); + + if (adv < 0) + return adv; + if (adv & CTL1000_ENABLE_MASTER) phydev_err(phydev, "Master/Slave resolution failed, maybe conflicting manual settings?\n"); else @@ -1907,57 +1895,6 @@ int genphy_soft_reset(struct phy_device *phydev) } EXPORT_SYMBOL(genphy_soft_reset); -int genphy_config_init(struct phy_device *phydev) -{ - int val; - __ETHTOOL_DECLARE_LINK_MODE_MASK(features) = { 0, }; - - linkmode_set_bit_array(phy_basic_ports_array, - ARRAY_SIZE(phy_basic_ports_array), - features); - linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, features); - linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, features); - - /* Do we support autonegotiation? */ - val = phy_read(phydev, MII_BMSR); - if (val < 0) - return val; - - if (val & BMSR_ANEGCAPABLE) - linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, features); - - if (val & BMSR_100FULL) - linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, features); - if (val & BMSR_100HALF) - linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, features); - if (val & BMSR_10FULL) - linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, features); - if (val & BMSR_10HALF) - linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, features); - - if (val & BMSR_ESTATEN) { - val = phy_read(phydev, MII_ESTATUS); - if (val < 0) - return val; - - if (val & ESTATUS_1000_TFULL) - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, - features); - if (val & ESTATUS_1000_THALF) - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, - features); - if (val & ESTATUS_1000_XFULL) - linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, - features); - } - - linkmode_and(phydev->supported, phydev->supported, features); - linkmode_and(phydev->advertising, phydev->advertising, features); - - return 0; -} -EXPORT_SYMBOL(genphy_config_init); - /** * genphy_read_abilities - read PHY abilities from Clause 22 registers * @phydev: target phy_device struct diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index a669945eb829..677c45985338 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -39,6 +39,16 @@ #define RTL8366RB_POWER_SAVE 0x15 #define RTL8366RB_POWER_SAVE_ON BIT(12) +#define RTL_SUPPORTS_5000FULL BIT(14) +#define RTL_SUPPORTS_2500FULL BIT(13) +#define RTL_SUPPORTS_10000FULL BIT(0) +#define RTL_ADV_2500FULL BIT(7) +#define RTL_LPADV_10000FULL BIT(11) +#define RTL_LPADV_5000FULL BIT(6) +#define RTL_LPADV_2500FULL BIT(5) + +#define RTL_GENERIC_PHYID 0x001cc800 + MODULE_DESCRIPTION("Realtek PHY driver"); MODULE_AUTHOR("Johnson Leung"); MODULE_LICENSE("GPL"); @@ -256,6 +266,166 @@ static int rtl8366rb_config_init(struct phy_device *phydev) return ret; } +static int rtlgen_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) +{ + int ret; + + if (devnum == MDIO_MMD_PCS && regnum == MDIO_PCS_EEE_ABLE) { + rtl821x_write_page(phydev, 0xa5c); + ret = __phy_read(phydev, 0x12); + rtl821x_write_page(phydev, 0); + } else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV) { + rtl821x_write_page(phydev, 0xa5d); + ret = __phy_read(phydev, 0x10); + rtl821x_write_page(phydev, 0); + } else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_LPABLE) { + rtl821x_write_page(phydev, 0xa5d); + ret = __phy_read(phydev, 0x11); + rtl821x_write_page(phydev, 0); + } else { + ret = -EOPNOTSUPP; + } + + return ret; +} + +static int rtlgen_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, + u16 val) +{ + int ret; + + if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV) { + rtl821x_write_page(phydev, 0xa5d); + ret = __phy_write(phydev, 0x10, val); + rtl821x_write_page(phydev, 0); + } else { + ret = -EOPNOTSUPP; + } + + return ret; +} + +static int rtl8125_read_mmd(struct phy_device *phydev, int devnum, u16 regnum) +{ + int ret = rtlgen_read_mmd(phydev, devnum, regnum); + + if (ret != -EOPNOTSUPP) + return ret; + + if (devnum == MDIO_MMD_PCS && regnum == MDIO_PCS_EEE_ABLE2) { + rtl821x_write_page(phydev, 0xa6e); + ret = __phy_read(phydev, 0x16); + rtl821x_write_page(phydev, 0); + } else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV2) { + rtl821x_write_page(phydev, 0xa6d); + ret = __phy_read(phydev, 0x12); + rtl821x_write_page(phydev, 0); + } else if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_LPABLE2) { + rtl821x_write_page(phydev, 0xa6d); + ret = __phy_read(phydev, 0x10); + rtl821x_write_page(phydev, 0); + } + + return ret; +} + +static int rtl8125_write_mmd(struct phy_device *phydev, int devnum, u16 regnum, + u16 val) +{ + int ret = rtlgen_write_mmd(phydev, devnum, regnum, val); + + if (ret != -EOPNOTSUPP) + return ret; + + if (devnum == MDIO_MMD_AN && regnum == MDIO_AN_EEE_ADV2) { + rtl821x_write_page(phydev, 0xa6d); + ret = __phy_write(phydev, 0x12, val); + rtl821x_write_page(phydev, 0); + } + + return ret; +} + +static int rtl8125_get_features(struct phy_device *phydev) +{ + int val; + + val = phy_read_paged(phydev, 0xa61, 0x13); + if (val < 0) + return val; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->supported, val & RTL_SUPPORTS_2500FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + phydev->supported, val & RTL_SUPPORTS_5000FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, + phydev->supported, val & RTL_SUPPORTS_10000FULL); + + return genphy_read_abilities(phydev); +} + +static int rtl8125_config_aneg(struct phy_device *phydev) +{ + int ret = 0; + + if (phydev->autoneg == AUTONEG_ENABLE) { + u16 adv2500 = 0; + + if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->advertising)) + adv2500 = RTL_ADV_2500FULL; + + ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12, + RTL_ADV_2500FULL, adv2500); + if (ret < 0) + return ret; + } + + return __genphy_config_aneg(phydev, ret); +} + +static int rtl8125_read_status(struct phy_device *phydev) +{ + if (phydev->autoneg == AUTONEG_ENABLE) { + int lpadv = phy_read_paged(phydev, 0xa5d, 0x13); + + if (lpadv < 0) + return lpadv; + + linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, + phydev->lp_advertising, lpadv & RTL_LPADV_10000FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, + phydev->lp_advertising, lpadv & RTL_LPADV_5000FULL); + linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, + phydev->lp_advertising, lpadv & RTL_LPADV_2500FULL); + } + + return genphy_read_status(phydev); +} + +static bool rtlgen_supports_2_5gbps(struct phy_device *phydev) +{ + int val; + + phy_write(phydev, RTL821x_PAGE_SELECT, 0xa61); + val = phy_read(phydev, 0x13); + phy_write(phydev, RTL821x_PAGE_SELECT, 0); + + return val >= 0 && val & RTL_SUPPORTS_2500FULL; +} + +static int rtlgen_match_phy_device(struct phy_device *phydev) +{ + return phydev->phy_id == RTL_GENERIC_PHYID && + !rtlgen_supports_2_5gbps(phydev); +} + +static int rtl8125_match_phy_device(struct phy_device *phydev) +{ + return phydev->phy_id == RTL_GENERIC_PHYID && + rtlgen_supports_2_5gbps(phydev); +} + static struct phy_driver realtek_drvs[] = { { PHY_ID_MATCH_EXACT(0x00008201), @@ -326,12 +496,26 @@ static struct phy_driver realtek_drvs[] = { .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, }, { - PHY_ID_MATCH_EXACT(0x001cc800), - .name = "Generic Realtek PHY", + .name = "Generic FE-GE Realtek PHY", + .match_phy_device = rtlgen_match_phy_device, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = rtl821x_read_page, + .write_page = rtl821x_write_page, + .read_mmd = rtlgen_read_mmd, + .write_mmd = rtlgen_write_mmd, + }, { + .name = "RTL8125 2.5Gbps internal", + .match_phy_device = rtl8125_match_phy_device, + .get_features = rtl8125_get_features, + .config_aneg = rtl8125_config_aneg, + .read_status = rtl8125_read_status, .suspend = genphy_suspend, .resume = genphy_resume, .read_page = rtl821x_read_page, .write_page = rtl821x_write_page, + .read_mmd = rtl8125_read_mmd, + .write_mmd = rtl8125_write_mmd, }, { PHY_ID_MATCH_EXACT(0x001cc961), .name = "RTL8366RB Gigabit Ethernet", diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c index e36c04c26866..272d5773573e 100644 --- a/drivers/net/phy/sfp.c +++ b/drivers/net/phy/sfp.c @@ -429,6 +429,7 @@ static umode_t sfp_hwmon_is_visible(const void *data, return 0; /* fall through */ case hwmon_temp_input: + case hwmon_temp_label: return 0444; default: return 0; @@ -447,6 +448,7 @@ static umode_t sfp_hwmon_is_visible(const void *data, return 0; /* fall through */ case hwmon_in_input: + case hwmon_in_label: return 0444; default: return 0; @@ -465,6 +467,7 @@ static umode_t sfp_hwmon_is_visible(const void *data, return 0; /* fall through */ case hwmon_curr_input: + case hwmon_curr_label: return 0444; default: return 0; @@ -492,6 +495,7 @@ static umode_t sfp_hwmon_is_visible(const void *data, return 0; /* fall through */ case hwmon_power_input: + case hwmon_power_label: return 0444; default: return 0; @@ -987,9 +991,63 @@ static int sfp_hwmon_read(struct device *dev, enum hwmon_sensor_types type, } } +static const char *const sfp_hwmon_power_labels[] = { + "TX_power", + "RX_power", +}; + +static int sfp_hwmon_read_string(struct device *dev, + enum hwmon_sensor_types type, + u32 attr, int channel, const char **str) +{ + switch (type) { + case hwmon_curr: + switch (attr) { + case hwmon_curr_label: + *str = "bias"; + return 0; + default: + return -EOPNOTSUPP; + } + break; + case hwmon_temp: + switch (attr) { + case hwmon_temp_label: + *str = "temperature"; + return 0; + default: + return -EOPNOTSUPP; + } + break; + case hwmon_in: + switch (attr) { + case hwmon_in_label: + *str = "VCC"; + return 0; + default: + return -EOPNOTSUPP; + } + break; + case hwmon_power: + switch (attr) { + case hwmon_power_label: + *str = sfp_hwmon_power_labels[channel]; + return 0; + default: + return -EOPNOTSUPP; + } + break; + default: + return -EOPNOTSUPP; + } + + return -EOPNOTSUPP; +} + static const struct hwmon_ops sfp_hwmon_ops = { .is_visible = sfp_hwmon_is_visible, .read = sfp_hwmon_read, + .read_string = sfp_hwmon_read_string, }; static u32 sfp_hwmon_chip_config[] = { @@ -1007,7 +1065,8 @@ static u32 sfp_hwmon_temp_config[] = { HWMON_T_MAX | HWMON_T_MIN | HWMON_T_MAX_ALARM | HWMON_T_MIN_ALARM | HWMON_T_CRIT | HWMON_T_LCRIT | - HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM, + HWMON_T_CRIT_ALARM | HWMON_T_LCRIT_ALARM | + HWMON_T_LABEL, 0, }; @@ -1021,7 +1080,8 @@ static u32 sfp_hwmon_vcc_config[] = { HWMON_I_MAX | HWMON_I_MIN | HWMON_I_MAX_ALARM | HWMON_I_MIN_ALARM | HWMON_I_CRIT | HWMON_I_LCRIT | - HWMON_I_CRIT_ALARM | HWMON_I_LCRIT_ALARM, + HWMON_I_CRIT_ALARM | HWMON_I_LCRIT_ALARM | + HWMON_I_LABEL, 0, }; @@ -1035,7 +1095,8 @@ static u32 sfp_hwmon_bias_config[] = { HWMON_C_MAX | HWMON_C_MIN | HWMON_C_MAX_ALARM | HWMON_C_MIN_ALARM | HWMON_C_CRIT | HWMON_C_LCRIT | - HWMON_C_CRIT_ALARM | HWMON_C_LCRIT_ALARM, + HWMON_C_CRIT_ALARM | HWMON_C_LCRIT_ALARM | + HWMON_C_LABEL, 0, }; @@ -1050,13 +1111,15 @@ static u32 sfp_hwmon_power_config[] = { HWMON_P_MAX | HWMON_P_MIN | HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM | HWMON_P_CRIT | HWMON_P_LCRIT | - HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM, + HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM | + HWMON_P_LABEL, /* Receive power */ HWMON_P_INPUT | HWMON_P_MAX | HWMON_P_MIN | HWMON_P_MAX_ALARM | HWMON_P_MIN_ALARM | HWMON_P_CRIT | HWMON_P_LCRIT | - HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM, + HWMON_P_CRIT_ALARM | HWMON_P_LCRIT_ALARM | + HWMON_P_LABEL, 0, }; diff --git a/drivers/net/phy/swphy.c b/drivers/net/phy/swphy.c index dad22481d9c1..53c214a22b95 100644 --- a/drivers/net/phy/swphy.c +++ b/drivers/net/phy/swphy.c @@ -22,6 +22,7 @@ struct swmii_regs { u16 bmsr; u16 lpa; u16 lpagb; + u16 estat; }; enum { @@ -48,6 +49,7 @@ static const struct swmii_regs speed[] = { [SWMII_SPEED_1000] = { .bmsr = BMSR_ESTATEN, .lpagb = LPA_1000FULL | LPA_1000HALF, + .estat = ESTATUS_1000_TFULL | ESTATUS_1000_THALF, }, }; @@ -56,11 +58,13 @@ static const struct swmii_regs duplex[] = { .bmsr = BMSR_ESTATEN | BMSR_100HALF, .lpa = LPA_10HALF | LPA_100HALF, .lpagb = LPA_1000HALF, + .estat = ESTATUS_1000_THALF, }, [SWMII_DUPLEX_FULL] = { .bmsr = BMSR_ESTATEN | BMSR_100FULL, .lpa = LPA_10FULL | LPA_100FULL, .lpagb = LPA_1000FULL, + .estat = ESTATUS_1000_TFULL, }, }; @@ -112,6 +116,7 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state) { int speed_index, duplex_index; u16 bmsr = BMSR_ANEGCAPABLE; + u16 estat = 0; u16 lpagb = 0; u16 lpa = 0; @@ -125,6 +130,7 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state) duplex_index = state->duplex ? SWMII_DUPLEX_FULL : SWMII_DUPLEX_HALF; bmsr |= speed[speed_index].bmsr & duplex[duplex_index].bmsr; + estat |= speed[speed_index].estat & duplex[duplex_index].estat; if (state->link) { bmsr |= BMSR_LSTATUS | BMSR_ANEGCOMPLETE; @@ -151,6 +157,8 @@ int swphy_read_reg(int reg, const struct fixed_phy_status *state) return lpa; case MII_STAT1000: return lpagb; + case MII_ESTATUS: + return estat; /* * We do not support emulating Clause 45 over Clause 22 register diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 43691b1acfd9..bb680352708a 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -197,7 +197,7 @@ static int vsc738x_config_init(struct phy_device *phydev) vsc73xx_config_init(phydev); - return genphy_config_init(phydev); + return 0; } static int vsc739x_config_init(struct phy_device *phydev) @@ -229,7 +229,7 @@ static int vsc739x_config_init(struct phy_device *phydev) vsc73xx_config_init(phydev); - return genphy_config_init(phydev); + return 0; } static int vsc73xx_config_aneg(struct phy_device *phydev) @@ -267,7 +267,7 @@ static int vsc8601_config_init(struct phy_device *phydev) if (ret < 0) return ret; - return genphy_config_init(phydev); + return 0; } static int vsc824x_ack_interrupt(struct phy_device *phydev) diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c index 2d1449345959..151c2a3f0b3a 100644 --- a/drivers/net/phy/xilinx_gmii2rgmii.c +++ b/drivers/net/phy/xilinx_gmii2rgmii.c @@ -29,7 +29,7 @@ struct gmii2rgmii { static int xgmiitorgmii_read_status(struct phy_device *phydev) { - struct gmii2rgmii *priv = phydev->priv; + struct gmii2rgmii *priv = mdiodev_get_drvdata(&phydev->mdio); struct mii_bus *bus = priv->mdio->bus; int addr = priv->mdio->addr; u16 val = 0; @@ -90,7 +90,7 @@ static int xgmiitorgmii_probe(struct mdio_device *mdiodev) memcpy(&priv->conv_phy_drv, priv->phy_dev->drv, sizeof(struct phy_driver)); priv->conv_phy_drv.read_status = xgmiitorgmii_read_status; - priv->phy_dev->priv = priv; + mdiodev_set_drvdata(&priv->phy_dev->mdio, priv); priv->phy_dev->drv = &priv->conv_phy_drv; return 0; |