diff options
Diffstat (limited to 'drivers/net/phy/dp83tg720.c')
| -rw-r--r-- | drivers/net/phy/dp83tg720.c | 38 |
1 files changed, 34 insertions, 4 deletions
diff --git a/drivers/net/phy/dp83tg720.c b/drivers/net/phy/dp83tg720.c index 326c9770a6dc..c706429b225a 100644 --- a/drivers/net/phy/dp83tg720.c +++ b/drivers/net/phy/dp83tg720.c @@ -17,6 +17,11 @@ #define DP83TG720S_PHY_RESET 0x1f #define DP83TG720S_HW_RESET BIT(15) +#define DP83TG720S_LPS_CFG3 0x18c +/* Power modes are documented as bit fields but used as values */ +/* Power Mode 0 is Normal mode */ +#define DP83TG720S_LPS_CFG3_PWR_MODE_0 BIT(0) + #define DP83TG720S_RGMII_DELAY_CTRL 0x602 /* In RGMII mode, Enable or disable the internal delay for RXD */ #define DP83TG720S_RGMII_RX_CLK_SEL BIT(1) @@ -31,11 +36,20 @@ static int dp83tg720_config_aneg(struct phy_device *phydev) { + int ret; + /* Autoneg is not supported and this PHY supports only one speed. * We need to care only about master/slave configuration if it was * changed by user. */ - return genphy_c45_pma_baset1_setup_master_slave(phydev); + ret = genphy_c45_pma_baset1_setup_master_slave(phydev); + if (ret) + return ret; + + /* Re-read role configuration to make changes visible even if + * the link is in administrative down state. + */ + return genphy_c45_pma_baset1_read_master_slave(phydev); } static int dp83tg720_read_status(struct phy_device *phydev) @@ -64,6 +78,8 @@ static int dp83tg720_read_status(struct phy_device *phydev) return ret; /* After HW reset we need to restore master/slave configuration. + * genphy_c45_pma_baset1_read_master_slave() call will be done + * by the dp83tg720_config_aneg() function. */ ret = dp83tg720_config_aneg(phydev); if (ret) @@ -154,10 +170,24 @@ static int dp83tg720_config_init(struct phy_device *phydev) */ usleep_range(1000, 2000); - if (phy_interface_is_rgmii(phydev)) - return dp83tg720_config_rgmii_delay(phydev); + if (phy_interface_is_rgmii(phydev)) { + ret = dp83tg720_config_rgmii_delay(phydev); + if (ret) + return ret; + } + + /* In case the PHY is bootstrapped in managed mode, we need to + * wake it. + */ + ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, DP83TG720S_LPS_CFG3, + DP83TG720S_LPS_CFG3_PWR_MODE_0); + if (ret) + return ret; - return 0; + /* Make role configuration visible for ethtool on init and after + * rest. + */ + return genphy_c45_pma_baset1_read_master_slave(phydev); } static struct phy_driver dp83tg720_driver[] = { |