diff options
Diffstat (limited to 'drivers/net/phy/dp83822.c')
| -rw-r--r-- | drivers/net/phy/dp83822.c | 344 |
1 files changed, 344 insertions, 0 deletions
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c new file mode 100644 index 000000000000..14335d14e9e4 --- /dev/null +++ b/drivers/net/phy/dp83822.c @@ -0,0 +1,344 @@ +/* + * Driver for the Texas Instruments DP83822 PHY + * + * Copyright (C) 2017 Texas Instruments Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/ethtool.h> +#include <linux/etherdevice.h> +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/phy.h> +#include <linux/netdevice.h> + +#define DP83822_PHY_ID 0x2000a240 +#define DP83822_DEVADDR 0x1f + +#define MII_DP83822_PHYSCR 0x11 +#define MII_DP83822_MISR1 0x12 +#define MII_DP83822_MISR2 0x13 +#define MII_DP83822_RESET_CTRL 0x1f + +#define DP83822_HW_RESET BIT(15) +#define DP83822_SW_RESET BIT(14) + +/* PHYSCR Register Fields */ +#define DP83822_PHYSCR_INT_OE BIT(0) /* Interrupt Output Enable */ +#define DP83822_PHYSCR_INTEN BIT(1) /* Interrupt Enable */ + +/* MISR1 bits */ +#define DP83822_RX_ERR_HF_INT_EN BIT(0) +#define DP83822_FALSE_CARRIER_HF_INT_EN BIT(1) +#define DP83822_ANEG_COMPLETE_INT_EN BIT(2) +#define DP83822_DUP_MODE_CHANGE_INT_EN BIT(3) +#define DP83822_SPEED_CHANGED_INT_EN BIT(4) +#define DP83822_LINK_STAT_INT_EN BIT(5) +#define DP83822_ENERGY_DET_INT_EN BIT(6) +#define DP83822_LINK_QUAL_INT_EN BIT(7) + +/* MISR2 bits */ +#define DP83822_JABBER_DET_INT_EN BIT(0) +#define DP83822_WOL_PKT_INT_EN BIT(1) +#define DP83822_SLEEP_MODE_INT_EN BIT(2) +#define DP83822_MDI_XOVER_INT_EN BIT(3) +#define DP83822_LB_FIFO_INT_EN BIT(4) +#define DP83822_PAGE_RX_INT_EN BIT(5) +#define DP83822_ANEG_ERR_INT_EN BIT(6) +#define DP83822_EEE_ERROR_CHANGE_INT_EN BIT(7) + +/* INT_STAT1 bits */ +#define DP83822_WOL_INT_EN BIT(4) +#define DP83822_WOL_INT_STAT BIT(12) + +#define MII_DP83822_RXSOP1 0x04a5 +#define MII_DP83822_RXSOP2 0x04a6 +#define MII_DP83822_RXSOP3 0x04a7 + +/* WoL Registers */ +#define MII_DP83822_WOL_CFG 0x04a0 +#define MII_DP83822_WOL_STAT 0x04a1 +#define MII_DP83822_WOL_DA1 0x04a2 +#define MII_DP83822_WOL_DA2 0x04a3 +#define MII_DP83822_WOL_DA3 0x04a4 + +/* WoL bits */ +#define DP83822_WOL_MAGIC_EN BIT(0) +#define DP83822_WOL_SECURE_ON BIT(5) +#define DP83822_WOL_EN BIT(7) +#define DP83822_WOL_INDICATION_SEL BIT(8) +#define DP83822_WOL_CLR_INDICATION BIT(11) + +static int dp83822_ack_interrupt(struct phy_device *phydev) +{ + int err; + + err = phy_read(phydev, MII_DP83822_MISR1); + if (err < 0) + return err; + + err = phy_read(phydev, MII_DP83822_MISR2); + if (err < 0) + return err; + + return 0; +} + +static int dp83822_set_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + struct net_device *ndev = phydev->attached_dev; + u16 value; + const u8 *mac; + + if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) { + mac = (const u8 *)ndev->dev_addr; + + if (!is_valid_ether_addr(mac)) + return -EINVAL; + + /* MAC addresses start with byte 5, but stored in mac[0]. + * 822 PHYs store bytes 4|5, 2|3, 0|1 + */ + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1, + (mac[1] << 8) | mac[0]); + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2, + (mac[3] << 8) | mac[2]); + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3, + (mac[5] << 8) | mac[4]); + + value = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_WOL_CFG); + if (wol->wolopts & WAKE_MAGIC) + value |= DP83822_WOL_MAGIC_EN; + else + value &= ~DP83822_WOL_MAGIC_EN; + + if (wol->wolopts & WAKE_MAGICSECURE) { + phy_write_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP1, + (wol->sopass[1] << 8) | wol->sopass[0]); + phy_write_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP2, + (wol->sopass[3] << 8) | wol->sopass[2]); + phy_write_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP3, + (wol->sopass[5] << 8) | wol->sopass[4]); + value |= DP83822_WOL_SECURE_ON; + } else { + value &= ~DP83822_WOL_SECURE_ON; + } + + value |= (DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL | + DP83822_WOL_CLR_INDICATION); + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, + value); + } else { + value = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_WOL_CFG); + value &= ~DP83822_WOL_EN; + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, + value); + } + + return 0; +} + +static void dp83822_get_wol(struct phy_device *phydev, + struct ethtool_wolinfo *wol) +{ + int value; + u16 sopass_val; + + wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE); + wol->wolopts = 0; + + value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG); + + if (value & DP83822_WOL_MAGIC_EN) + wol->wolopts |= WAKE_MAGIC; + + if (value & DP83822_WOL_SECURE_ON) { + sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP1); + wol->sopass[0] = (sopass_val & 0xff); + wol->sopass[1] = (sopass_val >> 8); + + sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP2); + wol->sopass[2] = (sopass_val & 0xff); + wol->sopass[3] = (sopass_val >> 8); + + sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR, + MII_DP83822_RXSOP3); + wol->sopass[4] = (sopass_val & 0xff); + wol->sopass[5] = (sopass_val >> 8); + + wol->wolopts |= WAKE_MAGICSECURE; + } + + /* WoL is not enabled so set wolopts to 0 */ + if (!(value & DP83822_WOL_EN)) + wol->wolopts = 0; +} + +static int dp83822_config_intr(struct phy_device *phydev) +{ + int misr_status; + int physcr_status; + int err; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { + misr_status = phy_read(phydev, MII_DP83822_MISR1); + if (misr_status < 0) + return misr_status; + + misr_status |= (DP83822_RX_ERR_HF_INT_EN | + DP83822_FALSE_CARRIER_HF_INT_EN | + DP83822_ANEG_COMPLETE_INT_EN | + DP83822_DUP_MODE_CHANGE_INT_EN | + DP83822_SPEED_CHANGED_INT_EN | + DP83822_LINK_STAT_INT_EN | + DP83822_ENERGY_DET_INT_EN | + DP83822_LINK_QUAL_INT_EN); + + err = phy_write(phydev, MII_DP83822_MISR1, misr_status); + if (err < 0) + return err; + + misr_status = phy_read(phydev, MII_DP83822_MISR2); + if (misr_status < 0) + return misr_status; + + misr_status |= (DP83822_JABBER_DET_INT_EN | + DP83822_WOL_PKT_INT_EN | + DP83822_SLEEP_MODE_INT_EN | + DP83822_MDI_XOVER_INT_EN | + DP83822_LB_FIFO_INT_EN | + DP83822_PAGE_RX_INT_EN | + DP83822_ANEG_ERR_INT_EN | + DP83822_EEE_ERROR_CHANGE_INT_EN); + + err = phy_write(phydev, MII_DP83822_MISR2, misr_status); + if (err < 0) + return err; + + physcr_status = phy_read(phydev, MII_DP83822_PHYSCR); + if (physcr_status < 0) + return physcr_status; + + physcr_status |= DP83822_PHYSCR_INT_OE | DP83822_PHYSCR_INTEN; + + } else { + err = phy_write(phydev, MII_DP83822_MISR1, 0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_DP83822_MISR1, 0); + if (err < 0) + return err; + + physcr_status = phy_read(phydev, MII_DP83822_PHYSCR); + if (physcr_status < 0) + return physcr_status; + + physcr_status &= ~DP83822_PHYSCR_INTEN; + } + + return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status); +} + +static int dp83822_config_init(struct phy_device *phydev) +{ + int err; + int value; + + err = genphy_config_init(phydev); + if (err < 0) + return err; + + value = DP83822_WOL_MAGIC_EN | DP83822_WOL_SECURE_ON | DP83822_WOL_EN; + + return phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, + value); +} + +static int dp83822_phy_reset(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_HW_RESET); + if (err < 0) + return err; + + dp83822_config_init(phydev); + + return 0; +} + +static int dp83822_suspend(struct phy_device *phydev) +{ + int value; + + value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG); + + if (!(value & DP83822_WOL_EN)) + genphy_suspend(phydev); + + return 0; +} + +static int dp83822_resume(struct phy_device *phydev) +{ + int value; + + genphy_resume(phydev); + + value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG); + + phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value | + DP83822_WOL_CLR_INDICATION); + + return 0; +} + +static struct phy_driver dp83822_driver[] = { + { + .phy_id = DP83822_PHY_ID, + .phy_id_mask = 0xfffffff0, + .name = "TI DP83822", + .features = PHY_BASIC_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = dp83822_config_init, + .soft_reset = dp83822_phy_reset, + .get_wol = dp83822_get_wol, + .set_wol = dp83822_set_wol, + .ack_interrupt = dp83822_ack_interrupt, + .config_intr = dp83822_config_intr, + .config_aneg = genphy_config_aneg, + .read_status = genphy_read_status, + .suspend = dp83822_suspend, + .resume = dp83822_resume, + }, +}; +module_phy_driver(dp83822_driver); + +static struct mdio_device_id __maybe_unused dp83822_tbl[] = { + { DP83822_PHY_ID, 0xfffffff0 }, + { }, +}; +MODULE_DEVICE_TABLE(mdio, dp83822_tbl); + +MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver"); +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com"); +MODULE_LICENSE("GPL"); |