diff options
Diffstat (limited to 'drivers/net/igb')
| -rw-r--r-- | drivers/net/igb/e1000_82575.c | 446 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_82575.h | 36 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_defines.h | 38 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_hw.h | 16 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_mac.c | 144 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_mac.h | 1 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_nvm.c | 52 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_phy.c | 138 | ||||
| -rw-r--r-- | drivers/net/igb/e1000_regs.h | 9 | ||||
| -rw-r--r-- | drivers/net/igb/igb.h | 51 | ||||
| -rw-r--r-- | drivers/net/igb/igb_ethtool.c | 203 | ||||
| -rw-r--r-- | drivers/net/igb/igb_main.c | 1284 |
12 files changed, 1626 insertions, 792 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index cda3ec879090..e098f234770f 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007 Intel Corporation. + Copyright(c) 2007 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -31,6 +31,7 @@ #include <linux/types.h> #include <linux/slab.h> +#include <linux/if_ether.h> #include "e1000_mac.h" #include "e1000_82575.h" @@ -45,7 +46,6 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *); static s32 igb_init_hw_82575(struct e1000_hw *); static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *); static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *); -static void igb_rar_set_82575(struct e1000_hw *, u8 *, u32); static s32 igb_reset_hw_82575(struct e1000_hw *); static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool); static s32 igb_setup_copper_link_82575(struct e1000_hw *); @@ -84,6 +84,12 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) case E1000_DEV_ID_82575GB_QUAD_COPPER: mac->type = e1000_82575; break; + case E1000_DEV_ID_82576: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: + case E1000_DEV_ID_82576_QUAD_COPPER: + mac->type = e1000_82576; + break; default: return -E1000_ERR_MAC_INIT; break; @@ -128,6 +134,8 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) mac->mta_reg_count = 128; /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES_82575; + if (mac->type == e1000_82576) + mac->rar_entry_count = E1000_RAR_ENTRIES_82576; /* Set if part includes ASF firmware */ mac->asf_firmware_present = true; /* Set if manageability features are enabled. */ @@ -171,6 +179,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) * for setting word_size. */ size += NVM_WORD_SIZE_BASE_SHIFT; + + /* EEPROM access above 16k is unsupported */ + if (size > 14) + size = 14; nvm->word_size = 1 << size; /* setup PHY parameters */ @@ -222,7 +234,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) } /** - * e1000_acquire_phy_82575 - Acquire rights to access PHY + * igb_acquire_phy_82575 - Acquire rights to access PHY * @hw: pointer to the HW structure * * Acquire access rights to the correct PHY. This is a @@ -238,7 +250,7 @@ static s32 igb_acquire_phy_82575(struct e1000_hw *hw) } /** - * e1000_release_phy_82575 - Release rights to access PHY + * igb_release_phy_82575 - Release rights to access PHY * @hw: pointer to the HW structure * * A wrapper to release access rights to the correct PHY. This is a @@ -253,7 +265,7 @@ static void igb_release_phy_82575(struct e1000_hw *hw) } /** - * e1000_read_phy_reg_sgmii_82575 - Read PHY register using sgmii + * igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -268,7 +280,7 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, u32 i, i2ccmd = 0; if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { - hw_dbg(hw, "PHY Address %u is out of range\n", offset); + hw_dbg("PHY Address %u is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -291,11 +303,11 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, break; } if (!(i2ccmd & E1000_I2CCMD_READY)) { - hw_dbg(hw, "I2CCMD Read did not complete\n"); + hw_dbg("I2CCMD Read did not complete\n"); return -E1000_ERR_PHY; } if (i2ccmd & E1000_I2CCMD_ERROR) { - hw_dbg(hw, "I2CCMD Error bit set\n"); + hw_dbg("I2CCMD Error bit set\n"); return -E1000_ERR_PHY; } @@ -306,7 +318,7 @@ static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, } /** - * e1000_write_phy_reg_sgmii_82575 - Write PHY register using sgmii + * igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset @@ -322,7 +334,7 @@ static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, u16 phy_data_swapped; if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + hw_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -349,11 +361,11 @@ static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, break; } if (!(i2ccmd & E1000_I2CCMD_READY)) { - hw_dbg(hw, "I2CCMD Write did not complete\n"); + hw_dbg("I2CCMD Write did not complete\n"); return -E1000_ERR_PHY; } if (i2ccmd & E1000_I2CCMD_ERROR) { - hw_dbg(hw, "I2CCMD Error bit set\n"); + hw_dbg("I2CCMD Error bit set\n"); return -E1000_ERR_PHY; } @@ -361,10 +373,10 @@ static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, } /** - * e1000_get_phy_id_82575 - Retreive PHY addr and id + * igb_get_phy_id_82575 - Retrieve PHY addr and id * @hw: pointer to the HW structure * - * Retreives the PHY address and ID for both PHY's which do and do not use + * Retrieves the PHY address and ID for both PHY's which do and do not use * sgmi interface. **/ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) @@ -393,9 +405,8 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) for (phy->addr = 1; phy->addr < 8; phy->addr++) { ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id); if (ret_val == 0) { - hw_dbg(hw, "Vendor ID 0x%08X read at address %u\n", - phy_id, - phy->addr); + hw_dbg("Vendor ID 0x%08X read at address %u\n", + phy_id, phy->addr); /* * At the time of this writing, The M88 part is * the only supported SGMII PHY product. @@ -403,8 +414,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw) if (phy_id == M88_VENDOR) break; } else { - hw_dbg(hw, "PHY address %u was unreadable\n", - phy->addr); + hw_dbg("PHY address %u was unreadable\n", phy->addr); } } @@ -422,7 +432,7 @@ out: } /** - * e1000_phy_hw_reset_sgmii_82575 - Performs a PHY reset + * igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset * @hw: pointer to the HW structure * * Resets the PHY using the serial gigabit media independent interface. @@ -436,7 +446,7 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw) * available to us at this time. */ - hw_dbg(hw, "Soft resetting SGMII attached PHY...\n"); + hw_dbg("Soft resetting SGMII attached PHY...\n"); /* * SFP documentation requires the following to configure the SPF module @@ -453,7 +463,7 @@ out: } /** - * e1000_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state + * igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state * @hw: pointer to the HW structure * @active: true to enable LPLU, false to disable * @@ -471,34 +481,29 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) s32 ret_val; u16 data; - ret_val = hw->phy.ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, - &data); + ret_val = phy->ops.read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data); if (ret_val) goto out; if (active) { data |= IGP02E1000_PM_D0_LPLU; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP02E1000_PHY_POWER_MGMT, - data); + ret_val = phy->ops.write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); if (ret_val) goto out; /* When LPLU is enabled, we should disable SmartSpeed */ - ret_val = hw->phy.ops.read_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = phy->ops.read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = phy->ops.write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) goto out; } else { data &= ~IGP02E1000_PM_D0_LPLU; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP02E1000_PHY_POWER_MGMT, - data); + ret_val = phy->ops.write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + data); /* * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most @@ -506,29 +511,25 @@ static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) * SmartSpeed, so performance is maintained. */ if (phy->smart_speed == e1000_smart_speed_on) { - ret_val = hw->phy.ops.read_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = phy->ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, &data); if (ret_val) goto out; data |= IGP01E1000_PSCFR_SMART_SPEED; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = phy->ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) goto out; } else if (phy->smart_speed == e1000_smart_speed_off) { - ret_val = hw->phy.ops.read_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + ret_val = phy->ops.read_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, &data); if (ret_val) goto out; data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = hw->phy.ops.write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + ret_val = phy->ops.write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, data); if (ret_val) goto out; } @@ -539,10 +540,10 @@ out: } /** - * e1000_acquire_nvm_82575 - Request for access to EEPROM + * igb_acquire_nvm_82575 - Request for access to EEPROM * @hw: pointer to the HW structure * - * Acquire the necessary semaphores for exclussive access to the EEPROM. + * Acquire the necessary semaphores for exclusive access to the EEPROM. * Set the EEPROM access request bit and wait for EEPROM access grant bit. * Return successful if access grant bit set, else clear the request for * EEPROM access and return -E1000_ERR_NVM (-1). @@ -565,7 +566,7 @@ out: } /** - * e1000_release_nvm_82575 - Release exclusive access to EEPROM + * igb_release_nvm_82575 - Release exclusive access to EEPROM * @hw: pointer to the HW structure * * Stop any current commands to the EEPROM and clear the EEPROM request bit, @@ -578,7 +579,7 @@ static void igb_release_nvm_82575(struct e1000_hw *hw) } /** - * e1000_acquire_swfw_sync_82575 - Acquire SW/FW semaphore + * igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore * @hw: pointer to the HW structure * @mask: specifies which semaphore to acquire * @@ -613,7 +614,7 @@ static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask) } if (i == timeout) { - hw_dbg(hw, "Can't access resource, SW_FW_SYNC timeout.\n"); + hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); ret_val = -E1000_ERR_SWFW_SYNC; goto out; } @@ -628,7 +629,7 @@ out: } /** - * e1000_release_swfw_sync_82575 - Release SW/FW semaphore + * igb_release_swfw_sync_82575 - Release SW/FW semaphore * @hw: pointer to the HW structure * @mask: specifies which semaphore to acquire * @@ -650,7 +651,7 @@ static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask) } /** - * e1000_get_cfg_done_82575 - Read config done bit + * igb_get_cfg_done_82575 - Read config done bit * @hw: pointer to the HW structure * * Read the management control register for the config done bit for @@ -675,7 +676,7 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) timeout--; } if (!timeout) - hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + hw_dbg("MNG configuration cycle has not completed.\n"); /* If EEPROM is not marked present, init the PHY manually */ if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) && @@ -686,7 +687,7 @@ static s32 igb_get_cfg_done_82575(struct e1000_hw *hw) } /** - * e1000_check_for_link_82575 - Check for link + * igb_check_for_link_82575 - Check for link * @hw: pointer to the HW structure * * If sgmii is enabled, then use the pcs register to determine link, otherwise @@ -701,20 +702,19 @@ static s32 igb_check_for_link_82575(struct e1000_hw *hw) if ((hw->phy.media_type != e1000_media_type_copper) || (igb_sgmii_active_82575(hw))) ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed, - &duplex); + &duplex); else ret_val = igb_check_for_copper_link(hw); return ret_val; } - /** - * e1000_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex + * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex * - * Using the physical coding sub-layer (PCS), retreive the current speed and + * Using the physical coding sub-layer (PCS), retrieve the current speed and * duplex, then store the values in the pointers provided. **/ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, @@ -764,24 +764,135 @@ static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed, } /** - * e1000_rar_set_82575 - Set receive address register + * igb_init_rx_addrs_82575 - Initialize receive address's * @hw: pointer to the HW structure - * @addr: pointer to the receive address - * @index: receive address array register + * @rar_count: receive address registers * - * Sets the receive address array register at index to the address passed - * in by addr. + * Setups the receive address registers by setting the base receive address + * register to the devices MAC address and clearing all the other receive + * address registers to 0. **/ -static void igb_rar_set_82575(struct e1000_hw *hw, u8 *addr, u32 index) +static void igb_init_rx_addrs_82575(struct e1000_hw *hw, u16 rar_count) { - if (index < E1000_RAR_ENTRIES_82575) - igb_rar_set(hw, addr, index); + u32 i; + u8 addr[6] = {0,0,0,0,0,0}; + /* + * This function is essentially the same as that of + * e1000_init_rx_addrs_generic. However it also takes care + * of the special case where the register offset of the + * second set of RARs begins elsewhere. This is implicitly taken care by + * function e1000_rar_set_generic. + */ + + hw_dbg("e1000_init_rx_addrs_82575"); + + /* Setup the receive address */ + hw_dbg("Programming MAC Address into RAR[0]\n"); + hw->mac.ops.rar_set(hw, hw->mac.addr, 0); + + /* Zero out the other (rar_entry_count - 1) receive addresses */ + hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); + for (i = 1; i < rar_count; i++) + hw->mac.ops.rar_set(hw, addr, i); +} + +/** + * igb_update_mc_addr_list_82575 - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @rar_used_count: the first RAR register free to program + * @rar_count: total number of supported Receive Address Registers + * + * Updates the Receive Address Registers and Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + * The parameter rar_count will usually be hw->mac.rar_entry_count + * unless there are workarounds that change this. + **/ +void igb_update_mc_addr_list_82575(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count, + u32 rar_used_count, u32 rar_count) +{ + u32 hash_value; + u32 i; + u8 addr[6] = {0,0,0,0,0,0}; + /* + * This function is essentially the same as that of + * igb_update_mc_addr_list_generic. However it also takes care + * of the special case where the register offset of the + * second set of RARs begins elsewhere. This is implicitly taken care by + * function e1000_rar_set_generic. + */ + + /* + * Load the first set of multicast addresses into the exact + * filters (RAR). If there are not enough to fill the RAR + * array, clear the filters. + */ + for (i = rar_used_count; i < rar_count; i++) { + if (mc_addr_count) { + igb_rar_set(hw, mc_addr_list, i); + mc_addr_count--; + mc_addr_list += ETH_ALEN; + } else { + igb_rar_set(hw, addr, i); + } + } + + /* Clear the old settings from the MTA */ + hw_dbg("Clearing MTA\n"); + for (i = 0; i < hw->mac.mta_reg_count; i++) { + array_wr32(E1000_MTA, i, 0); + wrfl(); + } + + /* Load any remaining multicast addresses into the hash table. */ + for (; mc_addr_count > 0; mc_addr_count--) { + hash_value = igb_hash_mc_addr(hw, mc_addr_list); + hw_dbg("Hash value = 0x%03X\n", hash_value); + hw->mac.ops.mta_set(hw, hash_value); + mc_addr_list += ETH_ALEN; + } +} + +/** + * igb_shutdown_fiber_serdes_link_82575 - Remove link during power down + * @hw: pointer to the HW structure + * + * In the case of fiber serdes, shut down optics and PCS on driver unload + * when management pass thru is not enabled. + **/ +void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw) +{ + u32 reg; + + if (hw->mac.type != e1000_82576 || + (hw->phy.media_type != e1000_media_type_fiber && + hw->phy.media_type != e1000_media_type_internal_serdes)) + return; + + /* if the management interface is not enabled, then power down */ + if (!igb_enable_mng_pass_thru(hw)) { + /* Disable PCS to turn off link */ + reg = rd32(E1000_PCS_CFG0); + reg &= ~E1000_PCS_CFG_PCS_EN; + wr32(E1000_PCS_CFG0, reg); + + /* shutdown the laser */ + reg = rd32(E1000_CTRL_EXT); + reg |= E1000_CTRL_EXT_SDP7_DATA; + wr32(E1000_CTRL_EXT, reg); + + /* flush the write to verify completion */ + wrfl(); + msleep(1); + } return; } /** - * e1000_reset_hw_82575 - Reset hardware + * igb_reset_hw_82575 - Reset hardware * @hw: pointer to the HW structure * * This resets the hardware into a known state. This is a @@ -798,9 +909,9 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) */ ret_val = igb_disable_pcie_master(hw); if (ret_val) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + hw_dbg("PCI-E Master disable polling has failed.\n"); - hw_dbg(hw, "Masking off all interrupts\n"); + hw_dbg("Masking off all interrupts\n"); wr32(E1000_IMC, 0xffffffff); wr32(E1000_RCTL, 0); @@ -811,7 +922,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) ctrl = rd32(E1000_CTRL); - hw_dbg(hw, "Issuing a global reset to MAC\n"); + hw_dbg("Issuing a global reset to MAC\n"); wr32(E1000_CTRL, ctrl | E1000_CTRL_RST); ret_val = igb_get_auto_rd_done(hw); @@ -821,7 +932,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ - hw_dbg(hw, "Auto Read Done did not complete\n"); + hw_dbg("Auto Read Done did not complete\n"); } /* If EEPROM is not present, run manual init scripts */ @@ -838,7 +949,7 @@ static s32 igb_reset_hw_82575(struct e1000_hw *hw) } /** - * e1000_init_hw_82575 - Initialize hardware + * igb_init_hw_82575 - Initialize hardware * @hw: pointer to the HW structure * * This inits the hardware readying it for operation. @@ -852,18 +963,18 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = igb_id_led_init(hw); if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); + hw_dbg("Error initializing identification LED\n"); /* This is not fatal and we should not stop init due to this */ } /* Disabling VLAN filtering */ - hw_dbg(hw, "Initializing the IEEE VLAN\n"); + hw_dbg("Initializing the IEEE VLAN\n"); igb_clear_vfta(hw); /* Setup the receive address */ - igb_init_rx_addrs(hw, rar_count); + igb_init_rx_addrs_82575(hw, rar_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + hw_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) array_wr32(E1000_MTA, i, 0); @@ -882,7 +993,7 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw) } /** - * e1000_setup_copper_link_82575 - Configure copper link settings + * igb_setup_copper_link_82575 - Configure copper link settings * @hw: pointer to the HW structure * * Configures the link for auto-neg or forced speed and duplex. Then we check @@ -933,10 +1044,10 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) * PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ - hw_dbg(hw, "Forcing Speed and Duplex\n"); + hw_dbg("Forcing Speed and Duplex\n"); ret_val = igb_phy_force_speed_duplex(hw); if (ret_val) { - hw_dbg(hw, "Error Forcing Speed and Duplex\n"); + hw_dbg("Error Forcing Speed and Duplex\n"); goto out; } } @@ -949,20 +1060,17 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) * Check link status. Wait up to 100 microseconds for link to become * valid. */ - ret_val = igb_phy_has_link(hw, - COPPER_LINK_UP_LIMIT, - 10, - &link); + ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link); if (ret_val) goto out; if (link) { - hw_dbg(hw, "Valid link established!!!\n"); + hw_dbg("Valid link established!!!\n"); /* Config the MAC and PHY after link is up */ igb_config_collision_dist(hw); ret_val = igb_config_fc_after_link_up(hw); } else { - hw_dbg(hw, "Unable to establish link!!!\n"); + hw_dbg("Unable to establish link!!!\n"); } out: @@ -970,7 +1078,7 @@ out: } /** - * e1000_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes + * igb_setup_fiber_serdes_link_82575 - Setup link for fiber/serdes * @hw: pointer to the HW structure * * Configures speed and duplex for fiber and serdes links. @@ -1018,7 +1126,7 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */ - hw_dbg(hw, "Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg); + hw_dbg("Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg); } else { /* Set PCS register for forced speed */ reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ @@ -1026,7 +1134,7 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ E1000_PCS_LCTL_FSD | /* Force Speed */ E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ - hw_dbg(hw, "Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); + hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg); } wr32(E1000_PCS_LCTL, reg); @@ -1034,7 +1142,7 @@ static s32 igb_setup_fiber_serdes_link_82575(struct e1000_hw *hw) } /** - * e1000_configure_pcs_link_82575 - Configure PCS link + * igb_configure_pcs_link_82575 - Configure PCS link * @hw: pointer to the HW structure * * Configure the physical coding sub-layer (PCS) link. The PCS link is @@ -1067,7 +1175,7 @@ static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw) */ reg |= E1000_PCS_LCTL_AN_RESTART | E1000_PCS_LCTL_AN_ENABLE; } else { - /* Set PCS regiseter for forced speed */ + /* Set PCS register for forced speed */ /* Turn off bits for full duplex, speed, and autoneg */ reg &= ~(E1000_PCS_LCTL_FSV_1000 | @@ -1088,8 +1196,7 @@ static s32 igb_configure_pcs_link_82575(struct e1000_hw *hw) E1000_PCS_LCTL_FORCE_LINK | E1000_PCS_LCTL_FLV_LINK_UP; - hw_dbg(hw, - "Wrote 0x%08X to PCS_LCTL to configure forced link\n", + hw_dbg("Wrote 0x%08X to PCS_LCTL to configure forced link\n", reg); } wr32(E1000_PCS_LCTL, reg); @@ -1099,7 +1206,7 @@ out: } /** - * e1000_sgmii_active_82575 - Return sgmii state + * igb_sgmii_active_82575 - Return sgmii state * @hw: pointer to the HW structure * * 82575 silicon has a serialized gigabit media independent interface (sgmii) @@ -1125,7 +1232,71 @@ out: } /** - * e1000_reset_init_script_82575 - Inits HW defaults after reset + * igb_translate_register_82576 - Translate the proper register offset + * @reg: e1000 register to be read + * + * Registers in 82576 are located in different offsets than other adapters + * even though they function in the same manner. This function takes in + * the name of the register to read and returns the correct offset for + * 82576 silicon. + **/ +u32 igb_translate_register_82576(u32 reg) +{ + /* + * Some of the Kawela registers are located at different + * offsets than they are in older adapters. + * Despite the difference in location, the registers + * function in the same manner. + */ + switch (reg) { + case E1000_TDBAL(0): + reg = 0x0E000; + break; + case E1000_TDBAH(0): + reg = 0x0E004; + break; + case E1000_TDLEN(0): + reg = 0x0E008; + break; + case E1000_TDH(0): + reg = 0x0E010; + break; + case E1000_TDT(0): + reg = 0x0E018; + break; + case E1000_TXDCTL(0): + reg = 0x0E028; + break; + case E1000_RDBAL(0): + reg = 0x0C000; + break; + case E1000_RDBAH(0): + reg = 0x0C004; + break; + case E1000_RDLEN(0): + reg = 0x0C008; + break; + case E1000_RDH(0): + reg = 0x0C010; + break; + case E1000_RDT(0): + reg = 0x0C018; + break; + case E1000_RXDCTL(0): + reg = 0x0C028; + break; + case E1000_SRRCTL(0): + reg = 0x0C00C; + break; + default: + break; + } + + return reg; +} + +/** + * igb_reset_init_script_82575 - Inits HW defaults after reset * @hw: pointer to the HW structure * * Inits recommended HW defaults after a reset when there is no EEPROM @@ -1134,7 +1305,7 @@ out: static s32 igb_reset_init_script_82575(struct e1000_hw *hw) { if (hw->mac.type == e1000_82575) { - hw_dbg(hw, "Running reset init script for 82575\n"); + hw_dbg("Running reset init script for 82575\n"); /* SerDes configuration via SERDESCTRL */ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C); igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78); @@ -1161,7 +1332,7 @@ static s32 igb_reset_init_script_82575(struct e1000_hw *hw) } /** - * e1000_read_mac_addr_82575 - Read device MAC address + * igb_read_mac_addr_82575 - Read device MAC address * @hw: pointer to the HW structure **/ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) @@ -1175,7 +1346,7 @@ static s32 igb_read_mac_addr_82575(struct e1000_hw *hw) } /** - * e1000_clear_hw_cntrs_82575 - Clear device specific hardware counters + * igb_clear_hw_cntrs_82575 - Clear device specific hardware counters * @hw: pointer to the HW structure * * Clears the hardware counters by reading the counter registers. @@ -1238,11 +1409,84 @@ static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw) temp = rd32(E1000_SCVPC); } +/** + * igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable + * @hw: pointer to the HW structure + * + * After rx enable if managability is enabled then there is likely some + * bad data at the start of the fifo and possibly in the DMA fifo. This + * function clears the fifos and flushes any packets that came in as rx was + * being enabled. + **/ +void igb_rx_fifo_flush_82575(struct e1000_hw *hw) +{ + u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled; + int i, ms_wait; + + if (hw->mac.type != e1000_82575 || + !(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN)) + return; + + /* Disable all RX queues */ + for (i = 0; i < 4; i++) { + rxdctl[i] = rd32(E1000_RXDCTL(i)); + wr32(E1000_RXDCTL(i), + rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); + } + /* Poll all queues to verify they have shut down */ + for (ms_wait = 0; ms_wait < 10; ms_wait++) { + msleep(1); + rx_enabled = 0; + for (i = 0; i < 4; i++) + rx_enabled |= rd32(E1000_RXDCTL(i)); + if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE)) + break; + } + + if (ms_wait == 10) + hw_dbg("Queue disable timed out after 10ms\n"); + + /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all + * incoming packets are rejected. Set enable and wait 2ms so that + * any packet that was coming in as RCTL.EN was set is flushed + */ + rfctl = rd32(E1000_RFCTL); + wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF); + + rlpml = rd32(E1000_RLPML); + wr32(E1000_RLPML, 0); + + rctl = rd32(E1000_RCTL); + temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP); + temp_rctl |= E1000_RCTL_LPE; + + wr32(E1000_RCTL, temp_rctl); + wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN); + wrfl(); + msleep(2); + + /* Enable RX queues that were previously enabled and restore our + * previous state + */ + for (i = 0; i < 4; i++) + wr32(E1000_RXDCTL(i), rxdctl[i]); + wr32(E1000_RCTL, rctl); + wrfl(); + + wr32(E1000_RLPML, rlpml); + wr32(E1000_RFCTL, rfctl); + + /* Flush receive errors generated by workaround */ + rd32(E1000_ROC); + rd32(E1000_RNBC); + rd32(E1000_MPC); +} + static struct e1000_mac_operations e1000_mac_ops_82575 = { .reset_hw = igb_reset_hw_82575, .init_hw = igb_init_hw_82575, .check_for_link = igb_check_for_link_82575, - .rar_set = igb_rar_set_82575, + .rar_set = igb_rar_set, .read_mac_addr = igb_read_mac_addr_82575, .get_speed_and_duplex = igb_get_speed_and_duplex_copper, }; diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index 76ea846663db..2f848e578a24 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007 Intel Corporation. + Copyright(c) 2007 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -28,7 +28,13 @@ #ifndef _E1000_82575_H_ #define _E1000_82575_H_ +u32 igb_translate_register_82576(u32 reg); +void igb_update_mc_addr_list_82575(struct e1000_hw*, u8*, u32, u32, u32); +extern void igb_shutdown_fiber_serdes_link_82575(struct e1000_hw *hw); +extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw); + #define E1000_RAR_ENTRIES_82575 16 +#define E1000_RAR_ENTRIES_82576 24 /* SRRCTL bit definitions */ #define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ @@ -56,7 +62,7 @@ #define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE #define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE -/* Immediate Interrupt RX (A.K.A. Low Latency Interrupt) */ +/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ /* Receive Descriptor - Advanced */ union e1000_adv_rx_desc { @@ -93,6 +99,8 @@ union e1000_adv_rx_desc { /* RSS Hash results */ /* RSS Packet Types as indicated in the receive descriptor */ +#define E1000_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPV4 hdr present */ +#define E1000_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ /* Transmit Descriptor - Advanced */ union e1000_adv_tx_desc { @@ -142,9 +150,25 @@ struct e1000_adv_tx_context_desc { #define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */ /* Direct Cache Access (DCA) definitions */ - - - -#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* TX Desc writeback RO bit */ +#define E1000_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ +#define E1000_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ + +#define E1000_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ +#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ + +#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ +#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ +#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ + +#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ + +/* Additional DCA related definitions, note change in position of CPUID */ +#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ +#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */ +#define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */ +#define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */ #endif diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index 8da9ffedc425..afdba3c9073c 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel(R) Gigabit Ethernet Linux driver - Copyright(c) 2007 Intel Corporation. + Copyright(c) 2007 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -90,13 +90,18 @@ #define E1000_I2CCMD_ERROR 0x80000000 #define E1000_MAX_SGMII_PHY_REG_ADDR 255 #define E1000_I2CCMD_PHY_TIMEOUT 200 +#define E1000_IVAR_VALID 0x80 +#define E1000_GPIE_NSICR 0x00000001 +#define E1000_GPIE_MSIX_MODE 0x00000010 +#define E1000_GPIE_EIAME 0x40000000 +#define E1000_GPIE_PBA 0x80000000 -/* Receive Decriptor bit definitions */ +/* Receive Descriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ @@ -213,6 +218,7 @@ /* Device Control */ #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ #define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ +#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ #define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ #define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ #define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ @@ -244,6 +250,7 @@ */ #define E1000_CONNSW_ENRGSRC 0x4 +#define E1000_PCS_CFG_PCS_EN 8 #define E1000_PCS_LCTL_FLV_LINK_UP 1 #define E1000_PCS_LCTL_FSV_100 2 #define E1000_PCS_LCTL_FSV_1000 4 @@ -253,6 +260,7 @@ #define E1000_PCS_LCTL_AN_ENABLE 0x10000 #define E1000_PCS_LCTL_AN_RESTART 0x20000 #define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 +#define E1000_ENABLE_SERDES_LOOPBACK 0x0410 #define E1000_PCS_LSTS_LINK_OK 1 #define E1000_PCS_LSTS_SPEED_100 2 @@ -340,6 +348,7 @@ #define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ /* Header split receive */ +#define E1000_RFCTL_LEF 0x00040000 /* Collision related configuration parameters */ #define E1000_COLLISION_THRESHOLD 15 @@ -359,6 +368,7 @@ #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_24K 0x0018 #define E1000_PBA_34K 0x0022 +#define E1000_PBA_64K 0x0040 /* 64KB */ #define IFS_MAX 80 #define IFS_MIN 40 @@ -379,7 +389,7 @@ #define E1000_ICR_RXO 0x00000040 /* rx overrun */ #define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */ #define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ -#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */ +#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */ #define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ #define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ #define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ @@ -443,12 +453,6 @@ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */ -/* queue 0 Rx descriptor FIFO parity error */ -/* queue 0 Tx descriptor FIFO parity error */ -/* host arb read buffer parity error */ -/* packet buffer parity error */ -/* queue 1 Rx descriptor FIFO parity error */ -/* queue 1 Tx descriptor FIFO parity error */ /* Extended Interrupt Mask Set */ #define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ @@ -457,12 +461,6 @@ /* Interrupt Cause Set */ #define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ #define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */ -/* queue 0 Rx descriptor FIFO parity error */ -/* queue 0 Tx descriptor FIFO parity error */ -/* host arb read buffer parity error */ -/* packet buffer parity error */ -/* queue 1 Rx descriptor FIFO parity error */ -/* queue 1 Tx descriptor FIFO parity error */ /* Extended Interrupt Cause Set */ @@ -539,6 +537,7 @@ /* PHY Control Register */ #define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ #define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ #define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ #define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ #define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ @@ -567,7 +566,6 @@ /* 1000BASE-T Control Register */ #define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ #define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ - /* 0=DTE device */ #define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ /* 0=Configure PHY as Slave */ #define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ @@ -581,7 +579,7 @@ /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ #define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_STATUS 0x01 /* Status Register */ #define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ #define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ #define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ @@ -708,8 +706,8 @@ /* Auto crossover enabled all speeds */ #define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* - * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T RX Threshold - * 0=Normal 10BASE-T RX Threshold + * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold + * 0=Normal 10BASE-T Rx Threshold */ /* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ #define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */ diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h index 7b2c70a3b8cc..19fa4ee96f2e 100644 --- a/drivers/net/igb/e1000_hw.h +++ b/drivers/net/igb/e1000_hw.h @@ -38,6 +38,10 @@ struct e1000_hw; +#define E1000_DEV_ID_82576 0x10C9 +#define E1000_DEV_ID_82576_FIBER 0x10E6 +#define E1000_DEV_ID_82576_SERDES 0x10E7 +#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 #define E1000_DEV_ID_82575EB_COPPER 0x10A7 #define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 #define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 @@ -50,6 +54,7 @@ struct e1000_hw; enum e1000_mac_type { e1000_undefined = 0, e1000_82575, + e1000_82576, e1000_num_macs /* List is 1-based, so subtract 1 for true count. */ }; @@ -410,14 +415,17 @@ struct e1000_mac_operations { s32 (*check_for_link)(struct e1000_hw *); s32 (*reset_hw)(struct e1000_hw *); s32 (*init_hw)(struct e1000_hw *); + bool (*check_mng_mode)(struct e1000_hw *); s32 (*setup_physical_interface)(struct e1000_hw *); void (*rar_set)(struct e1000_hw *, u8 *, u32); s32 (*read_mac_addr)(struct e1000_hw *); s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *); + void (*mta_set)(struct e1000_hw *, u32); }; struct e1000_phy_operations { s32 (*acquire_phy)(struct e1000_hw *); + s32 (*check_reset_block)(struct e1000_hw *); s32 (*force_speed_duplex)(struct e1000_hw *); s32 (*get_cfg_done)(struct e1000_hw *hw); s32 (*get_cable_length)(struct e1000_hw *); @@ -586,14 +594,10 @@ struct e1000_hw { #ifdef DEBUG extern char *igb_get_hw_dev_name(struct e1000_hw *hw); -#define hw_dbg(hw, format, arg...) \ +#define hw_dbg(format, arg...) \ printk(KERN_DEBUG "%s: " format, igb_get_hw_dev_name(hw), ##arg) #else -static inline int __attribute__ ((format (printf, 2, 3))) -hw_dbg(struct e1000_hw *hw, const char *format, ...) -{ - return 0; -} +#define hw_dbg(format, arg...) #endif #endif diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c index 3e84a3f0c1d8..20408aa1f916 100644 --- a/drivers/net/igb/e1000_mac.c +++ b/drivers/net/igb/e1000_mac.c @@ -36,10 +36,9 @@ static s32 igb_set_default_fc(struct e1000_hw *hw); static s32 igb_set_fc_watermarks(struct e1000_hw *hw); -static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); /** - * e1000_remove_device - Free device specific structure + * igb_remove_device - Free device specific structure * @hw: pointer to the HW structure * * If a device specific structure was allocated, this function will @@ -73,7 +72,7 @@ static s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value) } /** - * e1000_get_bus_info_pcie - Get PCIe bus information + * igb_get_bus_info_pcie - Get PCIe bus information * @hw: pointer to the HW structure * * Determines and stores the system bus information for a particular @@ -113,7 +112,7 @@ s32 igb_get_bus_info_pcie(struct e1000_hw *hw) } /** - * e1000_clear_vfta - Clear VLAN filter table + * igb_clear_vfta - Clear VLAN filter table * @hw: pointer to the HW structure * * Clears the register array which contains the VLAN filter table by @@ -130,7 +129,7 @@ void igb_clear_vfta(struct e1000_hw *hw) } /** - * e1000_write_vfta - Write value to VLAN filter table + * igb_write_vfta - Write value to VLAN filter table * @hw: pointer to the HW structure * @offset: register offset in VLAN filter table * @value: register value written to VLAN filter table @@ -145,7 +144,7 @@ void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) } /** - * e1000_init_rx_addrs - Initialize receive address's + * igb_init_rx_addrs - Initialize receive address's * @hw: pointer to the HW structure * @rar_count: receive address registers * @@ -158,12 +157,12 @@ void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) u32 i; /* Setup the receive address */ - hw_dbg(hw, "Programming MAC Address into RAR[0]\n"); + hw_dbg("Programming MAC Address into RAR[0]\n"); hw->mac.ops.rar_set(hw, hw->mac.addr, 0); /* Zero out the other (rar_entry_count - 1) receive addresses */ - hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1); + hw_dbg("Clearing RAR[1-%u]\n", rar_count-1); for (i = 1; i < rar_count; i++) { array_wr32(E1000_RA, (i << 1), 0); wrfl(); @@ -173,7 +172,7 @@ void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) } /** - * e1000_check_alt_mac_addr - Check for alternate MAC addr + * igb_check_alt_mac_addr - Check for alternate MAC addr * @hw: pointer to the HW structure * * Checks the nvm for an alternate MAC address. An alternate MAC address @@ -193,7 +192,7 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) ret_val = hw->nvm.ops.read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, &nvm_alt_mac_addr_offset); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } @@ -209,7 +208,7 @@ s32 igb_check_alt_mac_addr(struct e1000_hw *hw) offset = nvm_alt_mac_addr_offset + (i >> 1); ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } @@ -233,7 +232,7 @@ out: } /** - * e1000_rar_set - Set receive address register + * igb_rar_set - Set receive address register * @hw: pointer to the HW structure * @addr: pointer to the receive address * @index: receive address array register @@ -263,7 +262,7 @@ void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) } /** - * e1000_mta_set - Set multicast filter table address + * igb_mta_set - Set multicast filter table address * @hw: pointer to the HW structure * @hash_value: determines the MTA register and bit to set * @@ -298,7 +297,7 @@ static void igb_mta_set(struct e1000_hw *hw, u32 hash_value) } /** - * e1000_update_mc_addr_list - Update Multicast addresses + * igb_update_mc_addr_list - Update Multicast addresses * @hw: pointer to the HW structure * @mc_addr_list: array of multicast addresses to program * @mc_addr_count: number of multicast addresses to program @@ -336,7 +335,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, } /* Clear the old settings from the MTA */ - hw_dbg(hw, "Clearing MTA\n"); + hw_dbg("Clearing MTA\n"); for (i = 0; i < hw->mac.mta_reg_count; i++) { array_wr32(E1000_MTA, i, 0); wrfl(); @@ -345,14 +344,14 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, /* Load any remaining multicast addresses into the hash table. */ for (; mc_addr_count > 0; mc_addr_count--) { hash_value = igb_hash_mc_addr(hw, mc_addr_list); - hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); + hw_dbg("Hash value = 0x%03X\n", hash_value); igb_mta_set(hw, hash_value); mc_addr_list += ETH_ALEN; } } /** - * e1000_hash_mc_addr - Generate a multicast hash value + * igb_hash_mc_addr - Generate a multicast hash value * @hw: pointer to the HW structure * @mc_addr: pointer to a multicast address * @@ -360,7 +359,7 @@ void igb_update_mc_addr_list(struct e1000_hw *hw, * the multicast filter table array address and new table value. See * igb_mta_set() **/ -static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) +u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) { u32 hash_value, hash_mask; u8 bit_shift = 0; @@ -423,7 +422,7 @@ static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) } /** - * e1000_clear_hw_cntrs_base - Clear base hardware counters + * igb_clear_hw_cntrs_base - Clear base hardware counters * @hw: pointer to the HW structure * * Clears the base hardware counters by reading the counter registers. @@ -472,7 +471,7 @@ void igb_clear_hw_cntrs_base(struct e1000_hw *hw) } /** - * e1000_check_for_copper_link - Check for link (Copper) + * igb_check_for_copper_link - Check for link (Copper) * @hw: pointer to the HW structure * * Checks to see of the link status of the hardware has changed. If a @@ -540,14 +539,14 @@ s32 igb_check_for_copper_link(struct e1000_hw *hw) */ ret_val = igb_config_fc_after_link_up(hw); if (ret_val) - hw_dbg(hw, "Error configuring flow control\n"); + hw_dbg("Error configuring flow control\n"); out: return ret_val; } /** - * e1000_setup_link - Setup flow control and link settings + * igb_setup_link - Setup flow control and link settings * @hw: pointer to the HW structure * * Determines which flow control settings to use, then configures flow @@ -578,7 +577,7 @@ s32 igb_setup_link(struct e1000_hw *hw) */ hw->fc.original_type = hw->fc.type; - hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", hw->fc.type); + hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.type); /* Call the necessary media_type subroutine to configure the link. */ ret_val = hw->mac.ops.setup_physical_interface(hw); @@ -591,8 +590,7 @@ s32 igb_setup_link(struct e1000_hw *hw) * control is disabled, because it does not hurt anything to * initialize these registers. */ - hw_dbg(hw, - "Initializing the Flow Control address, type and timer regs\n"); + hw_dbg("Initializing the Flow Control address, type and timer regs\n"); wr32(E1000_FCT, FLOW_CONTROL_TYPE); wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH); wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW); @@ -606,7 +604,7 @@ out: } /** - * e1000_config_collision_dist - Configure collision distance + * igb_config_collision_dist - Configure collision distance * @hw: pointer to the HW structure * * Configures the collision distance to the default value and is used @@ -627,7 +625,7 @@ void igb_config_collision_dist(struct e1000_hw *hw) } /** - * e1000_set_fc_watermarks - Set flow control high/low watermarks + * igb_set_fc_watermarks - Set flow control high/low watermarks * @hw: pointer to the HW structure * * Sets the flow control high/low threshold (watermark) registers. If @@ -665,7 +663,7 @@ static s32 igb_set_fc_watermarks(struct e1000_hw *hw) } /** - * e1000_set_default_fc - Set flow control default values + * igb_set_default_fc - Set flow control default values * @hw: pointer to the HW structure * * Read the EEPROM for the default values for flow control and store the @@ -689,7 +687,7 @@ static s32 igb_set_default_fc(struct e1000_hw *hw) &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } @@ -706,7 +704,7 @@ out: } /** - * e1000_force_mac_fc - Force the MAC's flow control settings + * igb_force_mac_fc - Force the MAC's flow control settings * @hw: pointer to the HW structure * * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the @@ -740,7 +738,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) * 3: Both Rx and TX flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ - hw_dbg(hw, "hw->fc.type = %u\n", hw->fc.type); + hw_dbg("hw->fc.type = %u\n", hw->fc.type); switch (hw->fc.type) { case e1000_fc_none: @@ -758,7 +756,7 @@ s32 igb_force_mac_fc(struct e1000_hw *hw) ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + hw_dbg("Flow control param set incorrectly\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -770,7 +768,7 @@ out: } /** - * e1000_config_fc_after_link_up - Configures flow control after link + * igb_config_fc_after_link_up - Configures flow control after link * @hw: pointer to the HW structure * * Checks the status of auto-negotiation after link up to ensure that the @@ -801,7 +799,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) } if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + hw_dbg("Error forcing flow control settings\n"); goto out; } @@ -827,7 +825,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) goto out; if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - hw_dbg(hw, "Copper PHY and Auto Neg " + hw_dbg("Copper PHY and Auto Neg " "has not completed.\n"); goto out; } @@ -893,11 +891,11 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ if (hw->fc.original_type == e1000_fc_full) { hw->fc.type = e1000_fc_full; - hw_dbg(hw, "Flow Control = FULL.\r\n"); + hw_dbg("Flow Control = FULL.\r\n"); } else { hw->fc.type = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = " - "RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = " + "RX PAUSE frames only.\r\n"); } } /* @@ -913,7 +911,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.type = e1000_fc_tx_pause; - hw_dbg(hw, "Flow Control = TX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = TX PAUSE frames only.\r\n"); } /* * For transmitting PAUSE frames ONLY. @@ -928,7 +926,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.type = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } /* * Per the IEEE spec, at this point flow control should be @@ -955,10 +953,10 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) hw->fc.original_type == e1000_fc_tx_pause) || hw->fc.strict_ieee) { hw->fc.type = e1000_fc_none; - hw_dbg(hw, "Flow Control = NONE.\r\n"); + hw_dbg("Flow Control = NONE.\r\n"); } else { hw->fc.type = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\r\n"); + hw_dbg("Flow Control = RX PAUSE frames only.\r\n"); } /* @@ -968,7 +966,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex); if (ret_val) { - hw_dbg(hw, "Error getting link speed and duplex\n"); + hw_dbg("Error getting link speed and duplex\n"); goto out; } @@ -981,7 +979,7 @@ s32 igb_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = igb_force_mac_fc(hw); if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + hw_dbg("Error forcing flow control settings\n"); goto out; } } @@ -991,7 +989,7 @@ out: } /** - * e1000_get_speed_and_duplex_copper - Retreive current speed/duplex + * igb_get_speed_and_duplex_copper - Retreive current speed/duplex * @hw: pointer to the HW structure * @speed: stores the current speed * @duplex: stores the current duplex @@ -1007,28 +1005,28 @@ s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, status = rd32(E1000_STATUS); if (status & E1000_STATUS_SPEED_1000) { *speed = SPEED_1000; - hw_dbg(hw, "1000 Mbs, "); + hw_dbg("1000 Mbs, "); } else if (status & E1000_STATUS_SPEED_100) { *speed = SPEED_100; - hw_dbg(hw, "100 Mbs, "); + hw_dbg("100 Mbs, "); } else { *speed = SPEED_10; - hw_dbg(hw, "10 Mbs, "); + hw_dbg("10 Mbs, "); } if (status & E1000_STATUS_FD) { *duplex = FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + hw_dbg("Full Duplex\n"); } else { *duplex = HALF_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + hw_dbg("Half Duplex\n"); } return 0; } /** - * e1000_get_hw_semaphore - Acquire hardware semaphore + * igb_get_hw_semaphore - Acquire hardware semaphore * @hw: pointer to the HW structure * * Acquire the HW semaphore to access the PHY or NVM @@ -1051,7 +1049,7 @@ s32 igb_get_hw_semaphore(struct e1000_hw *hw) } if (i == timeout) { - hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + hw_dbg("Driver can't access device - SMBI bit is set.\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -1071,7 +1069,7 @@ s32 igb_get_hw_semaphore(struct e1000_hw *hw) if (i == timeout) { /* Release semaphores */ igb_put_hw_semaphore(hw); - hw_dbg(hw, "Driver can't access the NVM\n"); + hw_dbg("Driver can't access the NVM\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -1081,7 +1079,7 @@ out: } /** - * e1000_put_hw_semaphore - Release hardware semaphore + * igb_put_hw_semaphore - Release hardware semaphore * @hw: pointer to the HW structure * * Release hardware semaphore used to access the PHY or NVM @@ -1098,7 +1096,7 @@ void igb_put_hw_semaphore(struct e1000_hw *hw) } /** - * e1000_get_auto_rd_done - Check for auto read completion + * igb_get_auto_rd_done - Check for auto read completion * @hw: pointer to the HW structure * * Check EEPROM for Auto Read done bit. @@ -1117,7 +1115,7 @@ s32 igb_get_auto_rd_done(struct e1000_hw *hw) } if (i == AUTO_READ_DONE_TIMEOUT) { - hw_dbg(hw, "Auto read by HW from NVM has not completed.\n"); + hw_dbg("Auto read by HW from NVM has not completed.\n"); ret_val = -E1000_ERR_RESET; goto out; } @@ -1127,7 +1125,7 @@ out: } /** - * e1000_valid_led_default - Verify a valid default LED config + * igb_valid_led_default - Verify a valid default LED config * @hw: pointer to the HW structure * @data: pointer to the NVM (EEPROM) * @@ -1140,7 +1138,7 @@ static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data) ret_val = hw->nvm.ops.read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } @@ -1152,7 +1150,7 @@ out: } /** - * e1000_id_led_init - + * igb_id_led_init - * @hw: pointer to the HW structure * **/ @@ -1217,7 +1215,7 @@ out: } /** - * e1000_cleanup_led - Set LED config to default operation + * igb_cleanup_led - Set LED config to default operation * @hw: pointer to the HW structure * * Remove the current LED configuration and set the LED configuration @@ -1230,7 +1228,7 @@ s32 igb_cleanup_led(struct e1000_hw *hw) } /** - * e1000_blink_led - Blink LED + * igb_blink_led - Blink LED * @hw: pointer to the HW structure * * Blink the led's which are set to be on. @@ -1263,7 +1261,7 @@ s32 igb_blink_led(struct e1000_hw *hw) } /** - * e1000_led_off - Turn LED off + * igb_led_off - Turn LED off * @hw: pointer to the HW structure * * Turn LED off. @@ -1290,7 +1288,7 @@ s32 igb_led_off(struct e1000_hw *hw) } /** - * e1000_disable_pcie_master - Disables PCI-express master access + * igb_disable_pcie_master - Disables PCI-express master access * @hw: pointer to the HW structure * * Returns 0 (0) if successful, else returns -10 @@ -1322,7 +1320,7 @@ s32 igb_disable_pcie_master(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "Master requests are pending.\n"); + hw_dbg("Master requests are pending.\n"); ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING; goto out; } @@ -1332,7 +1330,7 @@ out: } /** - * e1000_reset_adaptive - Reset Adaptive Interframe Spacing + * igb_reset_adaptive - Reset Adaptive Interframe Spacing * @hw: pointer to the HW structure * * Reset the Adaptive Interframe Spacing throttle to default values. @@ -1342,7 +1340,7 @@ void igb_reset_adaptive(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; if (!mac->adaptive_ifs) { - hw_dbg(hw, "Not in Adaptive IFS mode!\n"); + hw_dbg("Not in Adaptive IFS mode!\n"); goto out; } @@ -1361,7 +1359,7 @@ out: } /** - * e1000_update_adaptive - Update Adaptive Interframe Spacing + * igb_update_adaptive - Update Adaptive Interframe Spacing * @hw: pointer to the HW structure * * Update the Adaptive Interframe Spacing Throttle value based on the @@ -1372,7 +1370,7 @@ void igb_update_adaptive(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; if (!mac->adaptive_ifs) { - hw_dbg(hw, "Not in Adaptive IFS mode!\n"); + hw_dbg("Not in Adaptive IFS mode!\n"); goto out; } @@ -1402,7 +1400,7 @@ out: } /** - * e1000_validate_mdi_setting - Verify MDI/MDIx settings + * igb_validate_mdi_setting - Verify MDI/MDIx settings * @hw: pointer to the HW structure * * Verify that when not using auto-negotitation that MDI/MDIx is correctly @@ -1413,7 +1411,7 @@ s32 igb_validate_mdi_setting(struct e1000_hw *hw) s32 ret_val = 0; if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) { - hw_dbg(hw, "Invalid MDI setting detected\n"); + hw_dbg("Invalid MDI setting detected\n"); hw->phy.mdix = 1; ret_val = -E1000_ERR_CONFIG; goto out; @@ -1424,7 +1422,7 @@ out: } /** - * e1000_write_8bit_ctrl_reg - Write a 8bit CTRL register + * igb_write_8bit_ctrl_reg - Write a 8bit CTRL register * @hw: pointer to the HW structure * @reg: 32bit register offset such as E1000_SCTL * @offset: register offset to write to @@ -1452,7 +1450,7 @@ s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, break; } if (!(regvalue & E1000_GEN_CTL_READY)) { - hw_dbg(hw, "Reg %08x did not indicate ready\n", reg); + hw_dbg("Reg %08x did not indicate ready\n", reg); ret_val = -E1000_ERR_PHY; goto out; } @@ -1462,7 +1460,7 @@ out: } /** - * e1000_enable_mng_pass_thru - Enable processing of ARP's + * igb_enable_mng_pass_thru - Enable processing of ARP's * @hw: pointer to the HW structure * * Verifies the hardware needs to allow ARPs to be processed by the host. diff --git a/drivers/net/igb/e1000_mac.h b/drivers/net/igb/e1000_mac.h index 326b6592307b..dc2f8cce15e7 100644 --- a/drivers/net/igb/e1000_mac.h +++ b/drivers/net/igb/e1000_mac.h @@ -94,5 +94,6 @@ enum e1000_mng_mode { #define E1000_HICR_C 0x02 extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); +extern u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); #endif diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c index 2897106fee92..a84e4e429fa7 100644 --- a/drivers/net/igb/e1000_nvm.c +++ b/drivers/net/igb/e1000_nvm.c @@ -32,7 +32,7 @@ #include "e1000_nvm.h" /** - * e1000_raise_eec_clk - Raise EEPROM clock + * igb_raise_eec_clk - Raise EEPROM clock * @hw: pointer to the HW structure * @eecd: pointer to the EEPROM * @@ -47,7 +47,7 @@ static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd) } /** - * e1000_lower_eec_clk - Lower EEPROM clock + * igb_lower_eec_clk - Lower EEPROM clock * @hw: pointer to the HW structure * @eecd: pointer to the EEPROM * @@ -62,7 +62,7 @@ static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd) } /** - * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM + * igb_shift_out_eec_bits - Shift data bits our to the EEPROM * @hw: pointer to the HW structure * @data: data to send to the EEPROM * @count: number of bits to shift out @@ -105,7 +105,7 @@ static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count) } /** - * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM + * igb_shift_in_eec_bits - Shift data bits in from the EEPROM * @hw: pointer to the HW structure * @count: number of bits to shift in * @@ -143,7 +143,7 @@ static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count) } /** - * e1000_poll_eerd_eewr_done - Poll for EEPROM read/write completion + * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion * @hw: pointer to the HW structure * @ee_reg: EEPROM flag for polling * @@ -174,7 +174,7 @@ static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg) } /** - * e1000_acquire_nvm - Generic request for access to EEPROM + * igb_acquire_nvm - Generic request for access to EEPROM * @hw: pointer to the HW structure * * Set the EEPROM access request bit and wait for EEPROM access grant bit. @@ -202,7 +202,7 @@ s32 igb_acquire_nvm(struct e1000_hw *hw) if (!timeout) { eecd &= ~E1000_EECD_REQ; wr32(E1000_EECD, eecd); - hw_dbg(hw, "Could not acquire NVM grant\n"); + hw_dbg("Could not acquire NVM grant\n"); ret_val = -E1000_ERR_NVM; } @@ -210,7 +210,7 @@ s32 igb_acquire_nvm(struct e1000_hw *hw) } /** - * e1000_standby_nvm - Return EEPROM to standby state + * igb_standby_nvm - Return EEPROM to standby state * @hw: pointer to the HW structure * * Return the EEPROM to a standby state. @@ -273,7 +273,7 @@ static void e1000_stop_nvm(struct e1000_hw *hw) } /** - * e1000_release_nvm - Release exclusive access to EEPROM + * igb_release_nvm - Release exclusive access to EEPROM * @hw: pointer to the HW structure * * Stop any current commands to the EEPROM and clear the EEPROM request bit. @@ -290,7 +290,7 @@ void igb_release_nvm(struct e1000_hw *hw) } /** - * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write + * igb_ready_nvm_eeprom - Prepares EEPROM for read/write * @hw: pointer to the HW structure * * Setups the EEPROM for reading and writing. @@ -337,7 +337,7 @@ static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "SPI NVM Status error\n"); + hw_dbg("SPI NVM Status error\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -348,7 +348,7 @@ out: } /** - * e1000_read_nvm_eerd - Reads EEPROM using EERD register + * igb_read_nvm_eerd - Reads EEPROM using EERD register * @hw: pointer to the HW structure * @offset: offset of word in the EEPROM to read * @words: number of words to read @@ -368,7 +368,7 @@ s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + hw_dbg("nvm parameter(s) out of bounds\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -391,7 +391,7 @@ out: } /** - * e1000_write_nvm_spi - Write to EEPROM using SPI + * igb_write_nvm_spi - Write to EEPROM using SPI * @hw: pointer to the HW structure * @offset: offset within the EEPROM to be written to * @words: number of words to write @@ -414,7 +414,7 @@ s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + hw_dbg("nvm parameter(s) out of bounds\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -475,7 +475,7 @@ out: } /** - * e1000_read_part_num - Read device part number + * igb_read_part_num - Read device part number * @hw: pointer to the HW structure * @part_num: pointer to device part number * @@ -489,14 +489,14 @@ s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num) ret_val = hw->nvm.ops.read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } *part_num = (u32)(nvm_data << 16); ret_val = hw->nvm.ops.read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } *part_num |= nvm_data; @@ -506,7 +506,7 @@ out: } /** - * e1000_read_mac_addr - Read device MAC address + * igb_read_mac_addr - Read device MAC address * @hw: pointer to the HW structure * * Reads the device MAC address from the EEPROM and stores the value. @@ -522,7 +522,7 @@ s32 igb_read_mac_addr(struct e1000_hw *hw) offset = i >> 1; ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF); @@ -541,7 +541,7 @@ out: } /** - * e1000_validate_nvm_checksum - Validate EEPROM checksum + * igb_validate_nvm_checksum - Validate EEPROM checksum * @hw: pointer to the HW structure * * Calculates the EEPROM checksum by reading/adding each word of the EEPROM @@ -556,14 +556,14 @@ s32 igb_validate_nvm_checksum(struct e1000_hw *hw) for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { ret_val = hw->nvm.ops.read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + hw_dbg("NVM Read Error\n"); goto out; } checksum += nvm_data; } if (checksum != (u16) NVM_SUM) { - hw_dbg(hw, "NVM Checksum Invalid\n"); + hw_dbg("NVM Checksum Invalid\n"); ret_val = -E1000_ERR_NVM; goto out; } @@ -573,7 +573,7 @@ out: } /** - * e1000_update_nvm_checksum - Update EEPROM checksum + * igb_update_nvm_checksum - Update EEPROM checksum * @hw: pointer to the HW structure * * Updates the EEPROM checksum by reading/adding each word of the EEPROM @@ -589,7 +589,7 @@ s32 igb_update_nvm_checksum(struct e1000_hw *hw) for (i = 0; i < NVM_CHECKSUM_REG; i++) { ret_val = hw->nvm.ops.read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error while updating checksum.\n"); + hw_dbg("NVM Read Error while updating checksum.\n"); goto out; } checksum += nvm_data; @@ -597,7 +597,7 @@ s32 igb_update_nvm_checksum(struct e1000_hw *hw) checksum = (u16) NVM_SUM - checksum; ret_val = hw->nvm.ops.write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); if (ret_val) - hw_dbg(hw, "NVM Write Error while updating checksum.\n"); + hw_dbg("NVM Write Error while updating checksum.\n"); out: return ret_val; diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c index 08a86b107229..17fddb91c9f5 100644 --- a/drivers/net/igb/e1000_phy.c +++ b/drivers/net/igb/e1000_phy.c @@ -61,7 +61,7 @@ static const u16 e1000_igp_2_cable_length_table[] = sizeof(e1000_igp_2_cable_length_table[0])) /** - * e1000_check_reset_block - Check if PHY reset is blocked + * igb_check_reset_block - Check if PHY reset is blocked * @hw: pointer to the HW structure * * Read the PHY management control register and check whether a PHY reset @@ -79,7 +79,7 @@ s32 igb_check_reset_block(struct e1000_hw *hw) } /** - * e1000_get_phy_id - Retrieve the PHY ID and revision + * igb_get_phy_id - Retrieve the PHY ID and revision * @hw: pointer to the HW structure * * Reads the PHY registers and stores the PHY ID and possibly the PHY @@ -109,7 +109,7 @@ out: } /** - * e1000_phy_reset_dsp - Reset PHY DSP + * igb_phy_reset_dsp - Reset PHY DSP * @hw: pointer to the HW structure * * Reset the digital signal processor. @@ -129,7 +129,7 @@ out: } /** - * e1000_read_phy_reg_mdic - Read MDI control register + * igb_read_phy_reg_mdic - Read MDI control register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -144,7 +144,7 @@ static s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) s32 ret_val = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + hw_dbg("PHY Address %d is out of range\n", offset); ret_val = -E1000_ERR_PARAM; goto out; } @@ -172,12 +172,12 @@ static s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Read did not complete\n"); + hw_dbg("MDI Read did not complete\n"); ret_val = -E1000_ERR_PHY; goto out; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + hw_dbg("MDI Error\n"); ret_val = -E1000_ERR_PHY; goto out; } @@ -188,7 +188,7 @@ out: } /** - * e1000_write_phy_reg_mdic - Write MDI control register + * igb_write_phy_reg_mdic - Write MDI control register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write to register at offset @@ -202,7 +202,7 @@ static s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) s32 ret_val = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + hw_dbg("PHY Address %d is out of range\n", offset); ret_val = -E1000_ERR_PARAM; goto out; } @@ -231,12 +231,12 @@ static s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Write did not complete\n"); + hw_dbg("MDI Write did not complete\n"); ret_val = -E1000_ERR_PHY; goto out; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + hw_dbg("MDI Error\n"); ret_val = -E1000_ERR_PHY; goto out; } @@ -246,7 +246,7 @@ out: } /** - * e1000_read_phy_reg_igp - Read igp PHY register + * igb_read_phy_reg_igp - Read igp PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -284,7 +284,7 @@ out: } /** - * e1000_write_phy_reg_igp - Write igp PHY register + * igb_write_phy_reg_igp - Write igp PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset @@ -321,7 +321,7 @@ out: } /** - * e1000_copper_link_setup_m88 - Setup m88 PHY's for copper link + * igb_copper_link_setup_m88 - Setup m88 PHY's for copper link * @hw: pointer to the HW structure * * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock @@ -423,7 +423,7 @@ s32 igb_copper_link_setup_m88(struct e1000_hw *hw) /* Commit the changes. */ ret_val = igb_phy_sw_reset(hw); if (ret_val) { - hw_dbg(hw, "Error committing the PHY changes\n"); + hw_dbg("Error committing the PHY changes\n"); goto out; } @@ -432,7 +432,7 @@ out: } /** - * e1000_copper_link_setup_igp - Setup igp PHY's for copper link + * igb_copper_link_setup_igp - Setup igp PHY's for copper link * @hw: pointer to the HW structure * * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for @@ -451,7 +451,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) ret_val = hw->phy.ops.reset_phy(hw); if (ret_val) { - hw_dbg(hw, "Error resetting the PHY.\n"); + hw_dbg("Error resetting the PHY.\n"); goto out; } @@ -467,7 +467,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) if (hw->phy.ops.set_d3_lplu_state) ret_val = hw->phy.ops.set_d3_lplu_state(hw, false); if (ret_val) { - hw_dbg(hw, "Error Disabling LPLU D3\n"); + hw_dbg("Error Disabling LPLU D3\n"); goto out; } } @@ -475,7 +475,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) /* disable lplu d0 during driver init */ ret_val = hw->phy.ops.set_d0_lplu_state(hw, false); if (ret_val) { - hw_dbg(hw, "Error Disabling LPLU D0\n"); + hw_dbg("Error Disabling LPLU D0\n"); goto out; } /* Configure mdi-mdix settings */ @@ -570,7 +570,7 @@ out: } /** - * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link + * igb_copper_link_autoneg - Setup/Enable autoneg for copper link * @hw: pointer to the HW structure * * Performs initial bounds checking on autoneg advertisement parameter, then @@ -597,13 +597,13 @@ s32 igb_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_advertised == 0) phy->autoneg_advertised = phy->autoneg_mask; - hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n"); + hw_dbg("Reconfiguring auto-neg advertisement params\n"); ret_val = igb_phy_setup_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error Setting up Auto-Negotiation\n"); + hw_dbg("Error Setting up Auto-Negotiation\n"); goto out; } - hw_dbg(hw, "Restarting Auto-Neg\n"); + hw_dbg("Restarting Auto-Neg\n"); /* * Restart auto-negotiation by setting the Auto Neg Enable bit and @@ -625,8 +625,8 @@ s32 igb_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { ret_val = igb_wait_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error while waiting for " - "autoneg to complete\n"); + hw_dbg("Error while waiting for " + "autoneg to complete\n"); goto out; } } @@ -638,7 +638,7 @@ out: } /** - * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation + * igb_phy_setup_autoneg - Configure PHY for auto-negotiation * @hw: pointer to the HW structure * * Reads the MII auto-neg advertisement register and/or the 1000T control @@ -689,39 +689,39 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) NWAY_AR_10T_HD_CAPS); mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); - hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised); + hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { - hw_dbg(hw, "Advertise 10mb Half duplex\n"); + hw_dbg("Advertise 10mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { - hw_dbg(hw, "Advertise 10mb Full duplex\n"); + hw_dbg("Advertise 10mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { - hw_dbg(hw, "Advertise 100mb Half duplex\n"); + hw_dbg("Advertise 100mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { - hw_dbg(hw, "Advertise 100mb Full duplex\n"); + hw_dbg("Advertise 100mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ if (phy->autoneg_advertised & ADVERTISE_1000_HALF) - hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n"); + hw_dbg("Advertise 1000mb Half duplex request denied!\n"); /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { - hw_dbg(hw, "Advertise 1000mb Full duplex\n"); + hw_dbg("Advertise 1000mb Full duplex\n"); mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } @@ -780,7 +780,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + hw_dbg("Flow control param set incorrectly\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -790,7 +790,7 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) { ret_val = hw->phy.ops.write_phy_reg(hw, @@ -805,7 +805,7 @@ out: } /** - * e1000_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY + * igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY * @hw: pointer to the HW structure * * Calls the PHY setup function to force speed and duplex. Clears the @@ -846,13 +846,12 @@ s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "IGP PSCR: %X\n", phy_data); + hw_dbg("IGP PSCR: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, - "Waiting for forced speed/duplex link on IGP phy.\n"); + hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, @@ -862,7 +861,7 @@ s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw) goto out; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + hw_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = igb_phy_has_link(hw, @@ -878,7 +877,7 @@ out: } /** - * e1000_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY + * igb_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY * @hw: pointer to the HW structure * * Calls the PHY setup function to force speed and duplex. Clears the @@ -909,7 +908,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) goto out; - hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data); + hw_dbg("M88E1000 PSCR: %X\n", phy_data); ret_val = hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -927,8 +926,7 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw) udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, - "Waiting for forced speed/duplex link on M88 phy.\n"); + hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, @@ -993,7 +991,7 @@ out: } /** - * e1000_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex + * igb_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex * @hw: pointer to the HW structure * @phy_ctrl: pointer to current value of PHY_CONTROL * @@ -1028,11 +1026,11 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; *phy_ctrl &= ~MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + hw_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; *phy_ctrl |= MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + hw_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ @@ -1040,12 +1038,12 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, ctrl |= E1000_CTRL_SPD_100; *phy_ctrl |= MII_CR_SPEED_100; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); - hw_dbg(hw, "Forcing 100mb\n"); + hw_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); *phy_ctrl |= MII_CR_SPEED_10; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - hw_dbg(hw, "Forcing 10mb\n"); + hw_dbg("Forcing 10mb\n"); } igb_config_collision_dist(hw); @@ -1054,7 +1052,7 @@ static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw, } /** - * e1000_set_d3_lplu_state - Sets low power link up state for D3 + * igb_set_d3_lplu_state - Sets low power link up state for D3 * @hw: pointer to the HW structure * @active: boolean used to enable/disable lplu * @@ -1146,7 +1144,7 @@ out: } /** - * e1000_check_downshift - Checks whether a downshift in speed occured + * igb_check_downshift - Checks whether a downshift in speed occured * @hw: pointer to the HW structure * * Success returns 0, Failure returns 1 @@ -1188,7 +1186,7 @@ out: } /** - * e1000_check_polarity_m88 - Checks the polarity. + * igb_check_polarity_m88 - Checks the polarity. * @hw: pointer to the HW structure * * Success returns 0, Failure returns -E1000_ERR_PHY (-2) @@ -1212,7 +1210,7 @@ static s32 igb_check_polarity_m88(struct e1000_hw *hw) } /** - * e1000_check_polarity_igp - Checks the polarity. + * igb_check_polarity_igp - Checks the polarity. * @hw: pointer to the HW structure * * Success returns 0, Failure returns -E1000_ERR_PHY (-2) @@ -1260,7 +1258,7 @@ out: } /** - * e1000_wait_autoneg - Wait for auto-neg compeletion + * igb_wait_autoneg - Wait for auto-neg compeletion * @hw: pointer to the HW structure * * Waits for auto-negotiation to complete or for the auto-negotiation time @@ -1292,7 +1290,7 @@ static s32 igb_wait_autoneg(struct e1000_hw *hw) } /** - * e1000_phy_has_link - Polls PHY for link + * igb_phy_has_link - Polls PHY for link * @hw: pointer to the HW structure * @iterations: number of times to poll for link * @usec_interval: delay between polling attempts @@ -1332,7 +1330,7 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, } /** - * e1000_get_cable_length_m88 - Determine cable length for m88 PHY + * igb_get_cable_length_m88 - Determine cable length for m88 PHY * @hw: pointer to the HW structure * * Reads the PHY specific status register to retrieve the cable length @@ -1369,7 +1367,7 @@ out: } /** - * e1000_get_cable_length_igp_2 - Determine cable length for igp2 PHY + * igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY * @hw: pointer to the HW structure * * The automatic gain control (agc) normalizes the amplitude of the @@ -1442,7 +1440,7 @@ out: } /** - * e1000_get_phy_info_m88 - Retrieve PHY information + * igb_get_phy_info_m88 - Retrieve PHY information * @hw: pointer to the HW structure * * Valid for only copper links. Read the PHY status register (sticky read) @@ -1459,7 +1457,7 @@ s32 igb_get_phy_info_m88(struct e1000_hw *hw) bool link; if (hw->phy.media_type != e1000_media_type_copper) { - hw_dbg(hw, "Phy info is only valid for copper media\n"); + hw_dbg("Phy info is only valid for copper media\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -1469,7 +1467,7 @@ s32 igb_get_phy_info_m88(struct e1000_hw *hw) goto out; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + hw_dbg("Phy info is only valid if link is up\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -1523,7 +1521,7 @@ out: } /** - * e1000_get_phy_info_igp - Retrieve igp PHY information + * igb_get_phy_info_igp - Retrieve igp PHY information * @hw: pointer to the HW structure * * Read PHY status to determine if link is up. If link is up, then @@ -1543,7 +1541,7 @@ s32 igb_get_phy_info_igp(struct e1000_hw *hw) goto out; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + hw_dbg("Phy info is only valid if link is up\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -1590,7 +1588,7 @@ out: } /** - * e1000_phy_sw_reset - PHY software reset + * igb_phy_sw_reset - PHY software reset * @hw: pointer to the HW structure * * Does a software reset of the PHY by reading the PHY control register and @@ -1617,7 +1615,7 @@ out: } /** - * e1000_phy_hw_reset - PHY hardware reset + * igb_phy_hw_reset - PHY hardware reset * @hw: pointer to the HW structure * * Verify the reset block is not blocking us from resetting. Acquire @@ -1663,7 +1661,7 @@ out: /* Internal function pointers */ /** - * e1000_get_phy_cfg_done - Generic PHY configuration done + * igb_get_phy_cfg_done - Generic PHY configuration done * @hw: pointer to the HW structure * * Return success if silicon family did not implement a family specific @@ -1678,7 +1676,7 @@ static s32 igb_get_phy_cfg_done(struct e1000_hw *hw) } /** - * e1000_release_phy - Generic release PHY + * igb_release_phy - Generic release PHY * @hw: pointer to the HW structure * * Return if silicon family does not require a semaphore when accessing the @@ -1691,7 +1689,7 @@ static void igb_release_phy(struct e1000_hw *hw) } /** - * e1000_acquire_phy - Generic acquire PHY + * igb_acquire_phy - Generic acquire PHY * @hw: pointer to the HW structure * * Return success if silicon family does not require a semaphore when @@ -1706,7 +1704,7 @@ static s32 igb_acquire_phy(struct e1000_hw *hw) } /** - * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex + * igb_phy_force_speed_duplex - Generic force PHY speed/duplex * @hw: pointer to the HW structure * * When the silicon family has not implemented a forced speed/duplex @@ -1721,14 +1719,14 @@ s32 igb_phy_force_speed_duplex(struct e1000_hw *hw) } /** - * e1000_phy_init_script_igp3 - Inits the IGP3 PHY + * igb_phy_init_script_igp3 - Inits the IGP3 PHY * @hw: pointer to the HW structure * * Initializes a Intel Gigabit PHY3 when an EEPROM is not present. **/ s32 igb_phy_init_script_igp3(struct e1000_hw *hw) { - hw_dbg(hw, "Running IGP 3 PHY init script\n"); + hw_dbg("Running IGP 3 PHY init script\n"); /* PHY init IGP 3 */ /* Enable rise/fall, 10-mode work in class-A */ diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index ff187b73c69e..b95093d24c09 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -56,6 +56,9 @@ #define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ #define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ #define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ +#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */ +#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ +#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ #define E1000_TCTL 0x00400 /* TX Control - RW */ #define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */ #define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */ @@ -217,6 +220,7 @@ #define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ #define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_RA2 0x054E0 /* 2nd half of receive address array - RW Array */ #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ #define E1000_VMD_CTL 0x0581C /* VMDq Control - RW */ #define E1000_WUC 0x05800 /* Wakeup Control - RW */ @@ -235,6 +239,8 @@ #define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ #define E1000_SWSM 0x05B50 /* SW Semaphore */ #define E1000_FWSM 0x05B54 /* FW Semaphore */ +#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */ +#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */ #define E1000_HICR 0x08F00 /* Host Inteface Control */ /* RSS registers */ @@ -256,7 +262,8 @@ #define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) #define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */ -#define E1000_REGISTER(a, reg) reg +#define E1000_REGISTER(a, reg) (((a)->mac.type < e1000_82576) \ + ? reg : e1000_translate_register_82576(reg)) #define wr32(reg, value) (writel(value, hw->hw_addr + reg)) #define rd32(reg) (readl(hw->hw_addr + reg)) diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 6b2e7d351d65..4ff6f0567f3f 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -36,12 +36,20 @@ struct igb_adapter; +#ifdef CONFIG_IGB_LRO +#include <linux/inet_lro.h> +#define MAX_LRO_AGGR 32 +#define MAX_LRO_DESCRIPTORS 8 +#endif + /* Interrupt defines */ #define IGB_MAX_TX_CLEAN 72 #define IGB_MIN_DYN_ITR 3000 #define IGB_MAX_DYN_ITR 96000 -#define IGB_START_ITR 6000 + +/* ((1000000000ns / (6000ints/s * 1024ns)) << 2 = 648 */ +#define IGB_START_ITR 648 #define IGB_DYN_ITR_PACKET_THRESHOLD 2 #define IGB_DYN_ITR_LENGTH_LOW 200 @@ -62,6 +70,7 @@ struct igb_adapter; /* Transmit and receive queues */ #define IGB_MAX_RX_QUEUES 4 +#define IGB_MAX_TX_QUEUES 4 /* RX descriptor control thresholds. * PTHRESH - MAC will consider prefetch if it has fewer than this number of @@ -124,6 +133,7 @@ struct igb_buffer { struct { struct page *page; u64 page_dma; + unsigned int page_offset; }; }; }; @@ -150,24 +160,26 @@ struct igb_ring { u16 itr_register; u16 cpu; + int queue_index; unsigned int total_bytes; unsigned int total_packets; union { /* TX */ struct { - spinlock_t tx_clean_lock; - spinlock_t tx_lock; + struct igb_queue_stats tx_stats; bool detect_tx_hung; }; /* RX */ struct { - /* arrays of page information for packet split */ - struct sk_buff *pending_skb; - int pending_skb_page; - int no_itr_adjust; struct igb_queue_stats rx_stats; struct napi_struct napi; + int set_itr; + struct igb_ring *buddy; +#ifdef CONFIG_IGB_LRO + struct net_lro_mgr lro_mgr; + bool lro_used; +#endif }; }; @@ -210,7 +222,6 @@ struct igb_adapter { u32 itr_setting; u16 tx_itr; u16 rx_itr; - int set_itr; struct work_struct reset_task; struct work_struct watchdog_task; @@ -265,14 +276,34 @@ struct igb_adapter { int msg_enable; struct msix_entry *msix_entries; u32 eims_enable_mask; + u32 eims_other; /* to not mess up cache alignment, always add to the bottom */ unsigned long state; - unsigned int msi_enabled; - + unsigned int flags; u32 eeprom_wol; + + /* for ioport free */ + int bars; + int need_ioport; + + struct igb_ring *multi_tx_table[IGB_MAX_TX_QUEUES]; +#ifdef CONFIG_IGB_LRO + unsigned int lro_max_aggr; + unsigned int lro_aggregated; + unsigned int lro_flushed; + unsigned int lro_no_desc; +#endif }; +#define IGB_FLAG_HAS_MSI (1 << 0) +#define IGB_FLAG_MSI_ENABLE (1 << 1) +#define IGB_FLAG_HAS_DCA (1 << 2) +#define IGB_FLAG_DCA_ENABLED (1 << 3) +#define IGB_FLAG_IN_NETPOLL (1 << 5) +#define IGB_FLAG_QUAD_PORT_A (1 << 6) +#define IGB_FLAG_NEED_CTX_IDX (1 << 7) + enum e1000_state_t { __IGB_TESTING, __IGB_RESETTING, diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 0447f9bcd27a..11aee1309951 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -93,13 +93,16 @@ static const struct igb_stats igb_gstrings_stats[] = { { "tx_smbus", IGB_STAT(stats.mgptc) }, { "rx_smbus", IGB_STAT(stats.mgprc) }, { "dropped_smbus", IGB_STAT(stats.mgpdc) }, +#ifdef CONFIG_IGB_LRO + { "lro_aggregated", IGB_STAT(lro_aggregated) }, + { "lro_flushed", IGB_STAT(lro_flushed) }, + { "lro_no_desc", IGB_STAT(lro_no_desc) }, +#endif }; #define IGB_QUEUE_STATS_LEN \ - ((((((struct igb_adapter *)netdev->priv)->num_rx_queues > 1) ? \ - ((struct igb_adapter *)netdev->priv)->num_rx_queues : 0) + \ - (((((struct igb_adapter *)netdev->priv)->num_tx_queues > 1) ? \ - ((struct igb_adapter *)netdev->priv)->num_tx_queues : 0))) * \ + ((((struct igb_adapter *)netdev->priv)->num_rx_queues + \ + ((struct igb_adapter *)netdev->priv)->num_tx_queues) * \ (sizeof(struct igb_queue_stats) / sizeof(u64))) #define IGB_GLOBAL_STATS_LEN \ sizeof(igb_gstrings_stats) / sizeof(struct igb_stats) @@ -829,8 +832,9 @@ err_setup: /* ethtool register test data */ struct igb_reg_test { u16 reg; - u8 array_len; - u8 test_type; + u16 reg_offset; + u16 array_len; + u16 test_type; u32 mask; u32 write; }; @@ -852,34 +856,72 @@ struct igb_reg_test { #define TABLE64_TEST_LO 5 #define TABLE64_TEST_HI 6 -/* default register test */ +/* 82576 reg test */ +static struct igb_reg_test reg_test_82576[] = { + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RDBAL(4), 0x40, 8, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(4), 0x40, 8, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(4), 0x40, 8, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + /* Enable all four RX queues before testing. */ + { E1000_RXDCTL(0), 0x100, 1, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + /* RDH is read-only for 82576, only test RDT. */ + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_TDBAL(4), 0x40, 8, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(4), 0x40, 8, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(4), 0x40, 8, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA2, 0, 8, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128,TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* 82575 register test */ static struct igb_reg_test reg_test_82575[] = { - { E1000_FCAL, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_FCAH, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_FCT, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, - { E1000_VET, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF }, + { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, /* Enable all four RX queues before testing. */ - { E1000_RXDCTL(0), 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE }, /* RDH is read-only for 82575, only test RDT. */ - { E1000_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, - { E1000_FCRTH, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, - { E1000_FCTTV, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, - { E1000_TIPG, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, - { E1000_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, - { E1000_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, - { E1000_RCTL, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_RCTL, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB }, - { E1000_RCTL, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF }, - { E1000_TCTL, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, - { E1000_TXCW, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF }, - { E1000_RA, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, - { E1000_RA, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF }, - { E1000_MTA, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 }, + { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 }, + { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF }, + { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB }, + { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF }, + { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 }, + { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF }, + { E1000_MTA, 0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, { 0, 0, 0, 0 } }; @@ -939,7 +981,15 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) u32 i, toggle; toggle = 0x7FFFF3FF; - test = reg_test_82575; + + switch (adapter->hw.mac.type) { + case e1000_82576: + test = reg_test_82576; + break; + default: + test = reg_test_82575; + break; + } /* Because the status register is such a special case, * we handle it separately from the rest of the register @@ -966,19 +1016,19 @@ static int igb_reg_test(struct igb_adapter *adapter, u64 *data) for (i = 0; i < test->array_len; i++) { switch (test->test_type) { case PATTERN_TEST: - REG_PATTERN_TEST(test->reg + (i * 0x100), + REG_PATTERN_TEST(test->reg + (i * test->reg_offset), test->mask, test->write); break; case SET_READ_TEST: - REG_SET_AND_CHECK(test->reg + (i * 0x100), + REG_SET_AND_CHECK(test->reg + (i * test->reg_offset), test->mask, test->write); break; case WRITE_NO_TEST: writel(test->write, (adapter->hw.hw_addr + test->reg) - + (i * 0x100)); + + (i * test->reg_offset)); break; case TABLE32_TEST: REG_PATTERN_TEST(test->reg + (i * 4), @@ -1052,7 +1102,7 @@ static int igb_intr_test(struct igb_adapter *adapter, u64 *data) if (adapter->msix_entries) { /* NOTE: we don't test MSI-X interrupts here, yet */ return 0; - } else if (adapter->msi_enabled) { + } else if (adapter->flags & IGB_FLAG_HAS_MSI) { shared_int = false; if (request_irq(irq, &igb_test_intr, 0, netdev->name, netdev)) { *data = 1; @@ -1394,13 +1444,39 @@ static int igb_set_phy_loopback(struct igb_adapter *adapter) static int igb_setup_loopback_test(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - u32 rctl; + u32 reg; if (hw->phy.media_type == e1000_media_type_fiber || hw->phy.media_type == e1000_media_type_internal_serdes) { - rctl = rd32(E1000_RCTL); - rctl |= E1000_RCTL_LBM_TCVR; - wr32(E1000_RCTL, rctl); + reg = rd32(E1000_RCTL); + reg |= E1000_RCTL_LBM_TCVR; + wr32(E1000_RCTL, reg); + + wr32(E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK); + + reg = rd32(E1000_CTRL); + reg &= ~(E1000_CTRL_RFCE | + E1000_CTRL_TFCE | + E1000_CTRL_LRST); + reg |= E1000_CTRL_SLU | + E1000_CTRL_FD; + wr32(E1000_CTRL, reg); + + /* Unset switch control to serdes energy detect */ + reg = rd32(E1000_CONNSW); + reg &= ~E1000_CONNSW_ENRGSRC; + wr32(E1000_CONNSW, reg); + + /* Set PCS register for forced speed */ + reg = rd32(E1000_PCS_LCTL); + reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/ + reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */ + E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */ + E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */ + E1000_PCS_LCTL_FSD | /* Force Speed */ + E1000_PCS_LCTL_FORCE_LINK; /* Force Link */ + wr32(E1000_PCS_LCTL, reg); + return 0; } else if (hw->phy.media_type == e1000_media_type_copper) { return igb_set_phy_loopback(adapter); @@ -1660,6 +1736,8 @@ static int igb_wol_exclusion(struct igb_adapter *adapter, wol->supported = 0; break; case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: /* Wake events not supported on port B */ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) { wol->supported = 0; @@ -1668,6 +1746,15 @@ static int igb_wol_exclusion(struct igb_adapter *adapter, /* return success for non excluded adapter ports */ retval = 0; break; + case E1000_DEV_ID_82576_QUAD_COPPER: + /* quad port adapters only support WoL on port A */ + if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) { + wol->supported = 0; + break; + } + /* return success for non excluded adapter ports */ + retval = 0; + break; default: /* dual port cards only support WoL on port A from now on * unless it was enabled in the eeprom for port B @@ -1774,6 +1861,8 @@ static int igb_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + int i; if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) || ((ec->rx_coalesce_usecs > 3) && @@ -1782,13 +1871,16 @@ static int igb_set_coalesce(struct net_device *netdev, return -EINVAL; /* convert to rate of irq's per second */ - if (ec->rx_coalesce_usecs <= 3) + if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) { adapter->itr_setting = ec->rx_coalesce_usecs; - else - adapter->itr_setting = (1000000 / ec->rx_coalesce_usecs); + adapter->itr = IGB_START_ITR; + } else { + adapter->itr_setting = ec->rx_coalesce_usecs << 2; + adapter->itr = adapter->itr_setting; + } - if (netif_running(netdev)) - igb_reinit_locked(adapter); + for (i = 0; i < adapter->num_rx_queues; i++) + wr32(adapter->rx_ring[i].itr_register, adapter->itr); return 0; } @@ -1801,7 +1893,7 @@ static int igb_get_coalesce(struct net_device *netdev, if (adapter->itr_setting <= 3) ec->rx_coalesce_usecs = adapter->itr_setting; else - ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting; + ec->rx_coalesce_usecs = adapter->itr_setting >> 2; return 0; } @@ -1835,6 +1927,18 @@ static void igb_get_ethtool_stats(struct net_device *netdev, int stat_count = sizeof(struct igb_queue_stats) / sizeof(u64); int j; int i; +#ifdef CONFIG_IGB_LRO + int aggregated = 0, flushed = 0, no_desc = 0; + + for (i = 0; i < adapter->num_rx_queues; i++) { + aggregated += adapter->rx_ring[i].lro_mgr.stats.aggregated; + flushed += adapter->rx_ring[i].lro_mgr.stats.flushed; + no_desc += adapter->rx_ring[i].lro_mgr.stats.no_desc; + } + adapter->lro_aggregated = aggregated; + adapter->lro_flushed = flushed; + adapter->lro_no_desc = no_desc; +#endif igb_update_stats(adapter); for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) { @@ -1842,6 +1946,13 @@ static void igb_get_ethtool_stats(struct net_device *netdev, data[i] = (igb_gstrings_stats[i].sizeof_stat == sizeof(u64)) ? *(u64 *)p : *(u32 *)p; } + for (j = 0; j < adapter->num_tx_queues; j++) { + int k; + queue_stat = (u64 *)&adapter->tx_ring[j].tx_stats; + for (k = 0; k < stat_count; k++) + data[i + k] = queue_stat[k]; + i += k; + } for (j = 0; j < adapter->num_rx_queues; j++) { int k; queue_stat = (u64 *)&adapter->rx_ring[j].rx_stats; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index e79a26a886c8..1b7cb29fe68e 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -41,22 +41,27 @@ #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/if_ether.h> - +#ifdef CONFIG_DCA +#include <linux/dca.h> +#endif #include "igb.h" -#define DRV_VERSION "1.0.8-k2" +#define DRV_VERSION "1.2.45-k2" char igb_driver_name[] = "igb"; char igb_driver_version[] = DRV_VERSION; static const char igb_driver_string[] = "Intel(R) Gigabit Ethernet Network Driver"; -static const char igb_copyright[] = "Copyright (c) 2007 Intel Corporation."; - +static const char igb_copyright[] = "Copyright (c) 2008 Intel Corporation."; static const struct e1000_info *igb_info_tbl[] = { [board_82575] = &e1000_82575_info, }; static struct pci_device_id igb_pci_tbl[] = { + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 }, @@ -71,8 +76,8 @@ static int igb_setup_all_tx_resources(struct igb_adapter *); static int igb_setup_all_rx_resources(struct igb_adapter *); static void igb_free_all_tx_resources(struct igb_adapter *); static void igb_free_all_rx_resources(struct igb_adapter *); -static void igb_free_tx_resources(struct igb_adapter *, struct igb_ring *); -static void igb_free_rx_resources(struct igb_adapter *, struct igb_ring *); +static void igb_free_tx_resources(struct igb_ring *); +static void igb_free_rx_resources(struct igb_ring *); void igb_update_stats(struct igb_adapter *); static int igb_probe(struct pci_dev *, const struct pci_device_id *); static void __devexit igb_remove(struct pci_dev *pdev); @@ -84,8 +89,8 @@ static void igb_configure_rx(struct igb_adapter *); static void igb_setup_rctl(struct igb_adapter *); static void igb_clean_all_tx_rings(struct igb_adapter *); static void igb_clean_all_rx_rings(struct igb_adapter *); -static void igb_clean_tx_ring(struct igb_adapter *, struct igb_ring *); -static void igb_clean_rx_ring(struct igb_adapter *, struct igb_ring *); +static void igb_clean_tx_ring(struct igb_ring *); +static void igb_clean_rx_ring(struct igb_ring *); static void igb_set_multi(struct net_device *); static void igb_update_phy_info(unsigned long); static void igb_watchdog(unsigned long); @@ -102,12 +107,18 @@ static irqreturn_t igb_msix_other(int irq, void *); static irqreturn_t igb_msix_rx(int irq, void *); static irqreturn_t igb_msix_tx(int irq, void *); static int igb_clean_rx_ring_msix(struct napi_struct *, int); -static bool igb_clean_tx_irq(struct igb_adapter *, struct igb_ring *); -static int igb_clean(struct napi_struct *, int); -static bool igb_clean_rx_irq_adv(struct igb_adapter *, - struct igb_ring *, int *, int); -static void igb_alloc_rx_buffers_adv(struct igb_adapter *, - struct igb_ring *, int); +#ifdef CONFIG_DCA +static void igb_update_rx_dca(struct igb_ring *); +static void igb_update_tx_dca(struct igb_ring *); +static void igb_setup_dca(struct igb_adapter *); +#endif /* CONFIG_DCA */ +static bool igb_clean_tx_irq(struct igb_ring *); +static int igb_poll(struct napi_struct *, int); +static bool igb_clean_rx_irq_adv(struct igb_ring *, int *, int); +static void igb_alloc_rx_buffers_adv(struct igb_ring *, int); +#ifdef CONFIG_IGB_LRO +static int igb_get_skb_hdr(struct sk_buff *skb, void **, void **, u64 *, void *); +#endif static int igb_ioctl(struct net_device *, struct ifreq *, int cmd); static void igb_tx_timeout(struct net_device *); static void igb_reset_task(struct work_struct *); @@ -121,6 +132,14 @@ static int igb_suspend(struct pci_dev *, pm_message_t); static int igb_resume(struct pci_dev *); #endif static void igb_shutdown(struct pci_dev *); +#ifdef CONFIG_DCA +static int igb_notify_dca(struct notifier_block *, unsigned long, void *); +static struct notifier_block dca_notifier = { + .notifier_call = igb_notify_dca, + .next = NULL, + .priority = 0 +}; +#endif #ifdef CONFIG_NET_POLL_CONTROLLER /* for netdump / net console */ @@ -153,6 +172,8 @@ static struct pci_driver igb_driver = { .err_handler = &igb_err_handler }; +static int global_quad_port_a; /* global quad port a indication */ + MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>"); MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver"); MODULE_LICENSE("GPL"); @@ -184,7 +205,12 @@ static int __init igb_init_module(void) printk(KERN_INFO "%s\n", igb_copyright); + global_quad_port_a = 0; + ret = pci_register_driver(&igb_driver); +#ifdef CONFIG_DCA + dca_register_notify(&dca_notifier); +#endif return ret; } @@ -198,6 +224,9 @@ module_init(igb_init_module); **/ static void __exit igb_exit_module(void) { +#ifdef CONFIG_DCA + dca_unregister_notify(&dca_notifier); +#endif pci_unregister_driver(&igb_driver); } @@ -226,25 +255,46 @@ static int igb_alloc_queues(struct igb_adapter *adapter) return -ENOMEM; } + adapter->rx_ring->buddy = adapter->tx_ring; + + for (i = 0; i < adapter->num_tx_queues; i++) { + struct igb_ring *ring = &(adapter->tx_ring[i]); + ring->adapter = adapter; + ring->queue_index = i; + } for (i = 0; i < adapter->num_rx_queues; i++) { struct igb_ring *ring = &(adapter->rx_ring[i]); ring->adapter = adapter; + ring->queue_index = i; ring->itr_register = E1000_ITR; - if (!ring->napi.poll) - netif_napi_add(adapter->netdev, &ring->napi, igb_clean, - adapter->napi.weight / - adapter->num_rx_queues); + /* set a default napi handler for each rx_ring */ + netif_napi_add(adapter->netdev, &ring->napi, igb_poll, 64); } return 0; } +static void igb_free_queues(struct igb_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + netif_napi_del(&adapter->rx_ring[i].napi); + + kfree(adapter->tx_ring); + kfree(adapter->rx_ring); +} + #define IGB_N0_QUEUE -1 static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue, int tx_queue, int msix_vector) { u32 msixbm = 0; struct e1000_hw *hw = &adapter->hw; + u32 ivar, index; + + switch (hw->mac.type) { + case e1000_82575: /* The 82575 assigns vectors using a bitmask, which matches the bitmask for the EICR/EIMS/EIMC registers. To assign one or more queues to a vector, we write the appropriate bits @@ -259,6 +309,47 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue, E1000_EICR_TX_QUEUE0 << tx_queue; } array_wr32(E1000_MSIXBM(0), msix_vector, msixbm); + break; + case e1000_82576: + /* Kawela uses a table-based method for assigning vectors. + Each queue has a single entry in the table to which we write + a vector number along with a "valid" bit. Sadly, the layout + of the table is somewhat counterintuitive. */ + if (rx_queue > IGB_N0_QUEUE) { + index = (rx_queue & 0x7); + ivar = array_rd32(E1000_IVAR0, index); + if (rx_queue < 8) { + /* vector goes into low byte of register */ + ivar = ivar & 0xFFFFFF00; + ivar |= msix_vector | E1000_IVAR_VALID; + } else { + /* vector goes into third byte of register */ + ivar = ivar & 0xFF00FFFF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 16; + } + adapter->rx_ring[rx_queue].eims_value= 1 << msix_vector; + array_wr32(E1000_IVAR0, index, ivar); + } + if (tx_queue > IGB_N0_QUEUE) { + index = (tx_queue & 0x7); + ivar = array_rd32(E1000_IVAR0, index); + if (tx_queue < 8) { + /* vector goes into second byte of register */ + ivar = ivar & 0xFFFF00FF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 8; + } else { + /* vector goes into high byte of register */ + ivar = ivar & 0x00FFFFFF; + ivar |= (msix_vector | E1000_IVAR_VALID) << 24; + } + adapter->tx_ring[tx_queue].eims_value= 1 << msix_vector; + array_wr32(E1000_IVAR0, index, ivar); + } + break; + default: + BUG(); + break; + } } /** @@ -274,13 +365,19 @@ static void igb_configure_msix(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; adapter->eims_enable_mask = 0; + if (hw->mac.type == e1000_82576) + /* Turn on MSI-X capability first, or our settings + * won't stick. And it will take days to debug. */ + wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE | + E1000_GPIE_PBA | E1000_GPIE_EIAME | + E1000_GPIE_NSICR); for (i = 0; i < adapter->num_tx_queues; i++) { struct igb_ring *tx_ring = &adapter->tx_ring[i]; igb_assign_vector(adapter, IGB_N0_QUEUE, i, vector++); adapter->eims_enable_mask |= tx_ring->eims_value; if (tx_ring->itr_val) - writel(1000000000 / (tx_ring->itr_val * 256), + writel(tx_ring->itr_val, hw->hw_addr + tx_ring->itr_register); else writel(1, hw->hw_addr + tx_ring->itr_register); @@ -288,10 +385,11 @@ static void igb_configure_msix(struct igb_adapter *adapter) for (i = 0; i < adapter->num_rx_queues; i++) { struct igb_ring *rx_ring = &adapter->rx_ring[i]; + rx_ring->buddy = 0; igb_assign_vector(adapter, i, IGB_N0_QUEUE, vector++); adapter->eims_enable_mask |= rx_ring->eims_value; if (rx_ring->itr_val) - writel(1000000000 / (rx_ring->itr_val * 256), + writel(rx_ring->itr_val, hw->hw_addr + rx_ring->itr_register); else writel(1, hw->hw_addr + rx_ring->itr_register); @@ -299,12 +397,11 @@ static void igb_configure_msix(struct igb_adapter *adapter) /* set vector for other causes, i.e. link changes */ + switch (hw->mac.type) { + case e1000_82575: array_wr32(E1000_MSIXBM(0), vector++, E1000_EIMS_OTHER); - /* disable IAM for ICR interrupt bits */ - wr32(E1000_IAM, 0); - tmp = rd32(E1000_CTRL_EXT); /* enable MSI-X PBA support*/ tmp |= E1000_CTRL_EXT_PBA_CLR; @@ -315,7 +412,21 @@ static void igb_configure_msix(struct igb_adapter *adapter) wr32(E1000_CTRL_EXT, tmp); adapter->eims_enable_mask |= E1000_EIMS_OTHER; + adapter->eims_other = E1000_EIMS_OTHER; + + break; + + case e1000_82576: + tmp = (vector++ | E1000_IVAR_VALID) << 8; + wr32(E1000_IVAR_MISC, tmp); + adapter->eims_enable_mask = (1 << (vector)) - 1; + adapter->eims_other = 1 << (vector - 1); + break; + default: + /* do nothing, since nothing else supports MSI-X */ + break; + } /* switch (hw->mac.type) */ wrfl(); } @@ -341,7 +452,7 @@ static int igb_request_msix(struct igb_adapter *adapter) if (err) goto out; ring->itr_register = E1000_EITR(0) + (vector << 2); - ring->itr_val = adapter->itr; + ring->itr_val = 976; /* ~4000 ints/sec */ vector++; } for (i = 0; i < adapter->num_rx_queues; i++) { @@ -357,6 +468,9 @@ static int igb_request_msix(struct igb_adapter *adapter) goto out; ring->itr_register = E1000_EITR(0) + (vector << 2); ring->itr_val = adapter->itr; + /* overwrite the poll routine for MSIX, we've already done + * netif_napi_add */ + ring->napi.poll = &igb_clean_rx_ring_msix; vector++; } @@ -365,9 +479,6 @@ static int igb_request_msix(struct igb_adapter *adapter) if (err) goto out; - adapter->napi.poll = igb_clean_rx_ring_msix; - for (i = 0; i < adapter->num_rx_queues; i++) - adapter->rx_ring[i].napi.poll = adapter->napi.poll; igb_configure_msix(adapter); return 0; out: @@ -380,7 +491,7 @@ static void igb_reset_interrupt_capability(struct igb_adapter *adapter) pci_disable_msix(adapter->pdev); kfree(adapter->msix_entries); adapter->msix_entries = NULL; - } else if (adapter->msi_enabled) + } else if (adapter->flags & IGB_FLAG_HAS_MSI) pci_disable_msi(adapter->pdev); return; } @@ -417,8 +528,12 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter) /* If we can't do MSI-X, try MSI */ msi_only: adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; if (!pci_enable_msi(adapter->pdev)) - adapter->msi_enabled = 1; + adapter->flags |= IGB_FLAG_HAS_MSI; + + /* Notify the stack of the (possibly) reduced Tx Queue count. */ + adapter->netdev->real_num_tx_queues = adapter->num_tx_queues; return; } @@ -436,29 +551,38 @@ static int igb_request_irq(struct igb_adapter *adapter) if (adapter->msix_entries) { err = igb_request_msix(adapter); - if (!err) { - /* enable IAM, auto-mask, - * DO NOT USE EIAM or IAM in legacy mode */ - wr32(E1000_IAM, IMS_ENABLE_MASK); + if (!err) goto request_done; - } /* fall back to MSI */ igb_reset_interrupt_capability(adapter); if (!pci_enable_msi(adapter->pdev)) - adapter->msi_enabled = 1; + adapter->flags |= IGB_FLAG_HAS_MSI; igb_free_all_tx_resources(adapter); igb_free_all_rx_resources(adapter); adapter->num_rx_queues = 1; igb_alloc_queues(adapter); + } else { + switch (hw->mac.type) { + case e1000_82575: + wr32(E1000_MSIXBM(0), + (E1000_EICR_RX_QUEUE0 | E1000_EIMS_OTHER)); + break; + case e1000_82576: + wr32(E1000_IVAR0, E1000_IVAR_VALID); + break; + default: + break; + } } - if (adapter->msi_enabled) { + + if (adapter->flags & IGB_FLAG_HAS_MSI) { err = request_irq(adapter->pdev->irq, &igb_intr_msi, 0, netdev->name, netdev); if (!err) goto request_done; /* fall back to legacy interrupts */ igb_reset_interrupt_capability(adapter); - adapter->msi_enabled = 0; + adapter->flags &= ~IGB_FLAG_HAS_MSI; } err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED, @@ -502,9 +626,12 @@ static void igb_irq_disable(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; if (adapter->msix_entries) { + wr32(E1000_EIAM, 0); wr32(E1000_EIMC, ~0); wr32(E1000_EIAC, 0); } + + wr32(E1000_IAM, 0); wr32(E1000_IMC, ~0); wrfl(); synchronize_irq(adapter->pdev->irq); @@ -519,13 +646,14 @@ static void igb_irq_enable(struct igb_adapter *adapter) struct e1000_hw *hw = &adapter->hw; if (adapter->msix_entries) { - wr32(E1000_EIMS, - adapter->eims_enable_mask); - wr32(E1000_EIAC, - adapter->eims_enable_mask); + wr32(E1000_EIAC, adapter->eims_enable_mask); + wr32(E1000_EIAM, adapter->eims_enable_mask); + wr32(E1000_EIMS, adapter->eims_enable_mask); wr32(E1000_IMS, E1000_IMS_LSC); - } else - wr32(E1000_IMS, IMS_ENABLE_MASK); + } else { + wr32(E1000_IMS, IMS_ENABLE_MASK); + wr32(E1000_IAM, IMS_ENABLE_MASK); + } } static void igb_update_mng_vlan(struct igb_adapter *adapter) @@ -632,12 +760,15 @@ static void igb_configure(struct igb_adapter *adapter) igb_configure_tx(adapter); igb_setup_rctl(adapter); igb_configure_rx(adapter); + + igb_rx_fifo_flush_82575(&adapter->hw); + /* call IGB_DESC_UNUSED which always leaves * at least 1 descriptor unused to make sure * next_to_use != next_to_clean */ for (i = 0; i < adapter->num_rx_queues; i++) { struct igb_ring *ring = &adapter->rx_ring[i]; - igb_alloc_rx_buffers_adv(adapter, ring, IGB_DESC_UNUSED(ring)); + igb_alloc_rx_buffers_adv(ring, IGB_DESC_UNUSED(ring)); } @@ -660,13 +791,10 @@ int igb_up(struct igb_adapter *adapter) clear_bit(__IGB_DOWN, &adapter->state); - napi_enable(&adapter->napi); - - if (adapter->msix_entries) { - for (i = 0; i < adapter->num_rx_queues; i++) - napi_enable(&adapter->rx_ring[i].napi); + for (i = 0; i < adapter->num_rx_queues; i++) + napi_enable(&adapter->rx_ring[i].napi); + if (adapter->msix_entries) igb_configure_msix(adapter); - } /* Clear any pending interrupts. */ rd32(E1000_ICR); @@ -693,7 +821,7 @@ void igb_down(struct igb_adapter *adapter) wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN); /* flush and sleep below */ - netif_stop_queue(netdev); + netif_tx_stop_all_queues(netdev); /* disable transmits in the hardware */ tctl = rd32(E1000_TCTL); @@ -703,11 +831,9 @@ void igb_down(struct igb_adapter *adapter) wrfl(); msleep(10); - napi_disable(&adapter->napi); + for (i = 0; i < adapter->num_rx_queues; i++) + napi_disable(&adapter->rx_ring[i].napi); - if (adapter->msix_entries) - for (i = 0; i < adapter->num_rx_queues; i++) - napi_disable(&adapter->rx_ring[i].napi); igb_irq_disable(adapter); del_timer_sync(&adapter->watchdog_timer); @@ -737,16 +863,23 @@ void igb_reinit_locked(struct igb_adapter *adapter) void igb_reset(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct e1000_fc_info *fc = &adapter->hw.fc; + struct e1000_mac_info *mac = &hw->mac; + struct e1000_fc_info *fc = &hw->fc; u32 pba = 0, tx_space, min_tx_space, min_rx_space; u16 hwm; /* Repartition Pba for greater than 9k mtu * To take effect CTRL.RST is required. */ + if (mac->type != e1000_82576) { pba = E1000_PBA_34K; + } + else { + pba = E1000_PBA_64K; + } - if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { + if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) && + (mac->type < e1000_82576)) { /* adjust PBA for jumbo frames */ wr32(E1000_PBA, pba); @@ -785,8 +918,8 @@ void igb_reset(struct igb_adapter *adapter) if (pba < min_rx_space) pba = min_rx_space; } + wr32(E1000_PBA, pba); } - wr32(E1000_PBA, pba); /* flow control settings */ /* The high water mark must be low enough to fit one full frame @@ -795,10 +928,15 @@ void igb_reset(struct igb_adapter *adapter) * - 90% of the Rx FIFO size, or * - the full Rx FIFO size minus one full frame */ hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - adapter->max_frame_size)); + ((pba << 10) - 2 * adapter->max_frame_size)); - fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ - fc->low_water = fc->high_water - 8; + if (mac->type < e1000_82576) { + fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + } else { + fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */ + fc->low_water = fc->high_water - 16; + } fc->pause_time = 0xFFFF; fc->send_xon = 1; fc->type = fc->original_type; @@ -821,6 +959,21 @@ void igb_reset(struct igb_adapter *adapter) } /** + * igb_is_need_ioport - determine if an adapter needs ioport resources or not + * @pdev: PCI device information struct + * + * Returns true if an adapter needs ioport resources + **/ +static int igb_is_need_ioport(struct pci_dev *pdev) +{ + switch (pdev->device) { + /* Currently there are no adapters that need ioport resources */ + default: + return false; + } +} + +/** * igb_probe - Device Initialization Routine * @pdev: PCI device information struct * @ent: entry in igb_pci_tbl @@ -839,13 +992,21 @@ static int __devinit igb_probe(struct pci_dev *pdev, struct e1000_hw *hw; const struct e1000_info *ei = igb_info_tbl[ent->driver_data]; unsigned long mmio_start, mmio_len; - static int cards_found; int i, err, pci_using_dac; u16 eeprom_data = 0; u16 eeprom_apme_mask = IGB_EEPROM_APME; u32 part_num; + int bars, need_ioport; - err = pci_enable_device(pdev); + /* do not allocate ioport bars when not needed */ + need_ioport = igb_is_need_ioport(pdev); + if (need_ioport) { + bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO); + err = pci_enable_device(pdev); + } else { + bars = pci_select_bars(pdev, IORESOURCE_MEM); + err = pci_enable_device_mem(pdev); + } if (err) return err; @@ -867,7 +1028,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, } } - err = pci_request_regions(pdev, igb_driver_name); + err = pci_request_selected_regions(pdev, bars, igb_driver_name); if (err) goto err_pci_reg; @@ -875,7 +1036,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, pci_save_state(pdev); err = -ENOMEM; - netdev = alloc_etherdev(sizeof(struct igb_adapter)); + netdev = alloc_etherdev_mq(sizeof(struct igb_adapter), IGB_MAX_TX_QUEUES); if (!netdev) goto err_alloc_etherdev; @@ -888,6 +1049,8 @@ static int __devinit igb_probe(struct pci_dev *pdev, hw = &adapter->hw; hw->back = adapter; adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE; + adapter->bars = bars; + adapter->need_ioport = need_ioport; mmio_start = pci_resource_start(pdev, 0); mmio_len = pci_resource_len(pdev, 0); @@ -907,7 +1070,6 @@ static int __devinit igb_probe(struct pci_dev *pdev, igb_set_ethtool_ops(netdev); netdev->tx_timeout = &igb_tx_timeout; netdev->watchdog_timeo = 5 * HZ; - netif_napi_add(netdev, &adapter->napi, igb_clean, 64); netdev->vlan_rx_register = igb_vlan_rx_register; netdev->vlan_rx_add_vid = igb_vlan_rx_add_vid; netdev->vlan_rx_kill_vid = igb_vlan_rx_kill_vid; @@ -921,8 +1083,6 @@ static int __devinit igb_probe(struct pci_dev *pdev, netdev->mem_start = mmio_start; netdev->mem_end = mmio_start + mmio_len; - adapter->bd_number = cards_found; - /* PCI config space info */ hw->vendor_id = pdev->vendor; hw->device_id = pdev->device; @@ -947,6 +1107,17 @@ static int __devinit igb_probe(struct pci_dev *pdev, igb_get_bus_info_pcie(hw); + /* set flags */ + switch (hw->mac.type) { + case e1000_82576: + case e1000_82575: + adapter->flags |= IGB_FLAG_HAS_DCA; + adapter->flags |= IGB_FLAG_NEED_CTX_IDX; + break; + default: + break; + } + hw->phy.autoneg_wait_to_complete = false; hw->mac.adaptive_ifs = true; @@ -968,8 +1139,17 @@ static int __devinit igb_probe(struct pci_dev *pdev, NETIF_F_HW_VLAN_FILTER; netdev->features |= NETIF_F_TSO; - netdev->features |= NETIF_F_TSO6; + +#ifdef CONFIG_IGB_LRO + netdev->features |= NETIF_F_LRO; +#endif + + netdev->vlan_features |= NETIF_F_TSO; + netdev->vlan_features |= NETIF_F_TSO6; + netdev->vlan_features |= NETIF_F_HW_CSUM; + netdev->vlan_features |= NETIF_F_SG; + if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; @@ -1053,11 +1233,23 @@ static int __devinit igb_probe(struct pci_dev *pdev, adapter->eeprom_wol = 0; break; case E1000_DEV_ID_82575EB_FIBER_SERDES: + case E1000_DEV_ID_82576_FIBER: + case E1000_DEV_ID_82576_SERDES: /* Wake events only supported on port A for dual fiber * regardless of eeprom setting */ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) adapter->eeprom_wol = 0; break; + case E1000_DEV_ID_82576_QUAD_COPPER: + /* if quad port adapter, disable WoL on all but port A */ + if (global_quad_port_a != 0) + adapter->eeprom_wol = 0; + else + adapter->flags |= IGB_FLAG_QUAD_PORT_A; + /* Reset for multiple quad port adapters */ + if (++global_quad_port_a == 4) + global_quad_port_a = 0; + break; } /* initialize the wol settings based on the eeprom settings */ @@ -1072,13 +1264,25 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* tell the stack to leave us alone until igb_open() is called */ netif_carrier_off(netdev); - netif_stop_queue(netdev); + netif_tx_stop_all_queues(netdev); strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); if (err) goto err_register; +#ifdef CONFIG_DCA + if ((adapter->flags & IGB_FLAG_HAS_DCA) && + (dca_add_requester(&pdev->dev) == 0)) { + adapter->flags |= IGB_FLAG_DCA_ENABLED; + dev_info(&pdev->dev, "DCA enabled\n"); + /* Always use CB2 mode, difference is masked + * in the CB driver. */ + wr32(E1000_DCA_CTRL, 2); + igb_setup_dca(adapter); + } +#endif + dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n"); /* print bus type/speed/width info */ dev_info(&pdev->dev, @@ -1099,10 +1303,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n", adapter->msix_entries ? "MSI-X" : - adapter->msi_enabled ? "MSI" : "legacy", + (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy", adapter->num_rx_queues, adapter->num_tx_queues); - cards_found++; return 0; err_register: @@ -1115,15 +1318,14 @@ err_eeprom: iounmap(hw->flash_address); igb_remove_device(hw); - kfree(adapter->tx_ring); - kfree(adapter->rx_ring); + igb_free_queues(adapter); err_sw_init: err_hw_init: iounmap(hw->hw_addr); err_ioremap: free_netdev(netdev); err_alloc_etherdev: - pci_release_regions(pdev); + pci_release_selected_regions(pdev, bars); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -1143,6 +1345,9 @@ static void __devexit igb_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct igb_adapter *adapter = netdev_priv(netdev); +#ifdef CONFIG_DCA + struct e1000_hw *hw = &adapter->hw; +#endif /* flush_scheduled work may reschedule our watchdog task, so * explicitly disable watchdog tasks from being rescheduled */ @@ -1152,6 +1357,15 @@ static void __devexit igb_remove(struct pci_dev *pdev) flush_scheduled_work(); +#ifdef CONFIG_DCA + if (adapter->flags & IGB_FLAG_DCA_ENABLED) { + dev_info(&pdev->dev, "DCA disabled\n"); + dca_remove_requester(&pdev->dev); + adapter->flags &= ~IGB_FLAG_DCA_ENABLED; + wr32(E1000_DCA_CTRL, 1); + } +#endif + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ igb_release_hw_control(adapter); @@ -1164,13 +1378,12 @@ static void __devexit igb_remove(struct pci_dev *pdev) igb_remove_device(&adapter->hw); igb_reset_interrupt_capability(adapter); - kfree(adapter->tx_ring); - kfree(adapter->rx_ring); + igb_free_queues(adapter); iounmap(adapter->hw.hw_addr); if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); - pci_release_regions(pdev); + pci_release_selected_regions(pdev, adapter->bars); free_netdev(netdev); @@ -1200,9 +1413,11 @@ static int __devinit igb_sw_init(struct igb_adapter *adapter) /* Number of supported queues. */ /* Having more queues than CPUs doesn't make sense. */ - adapter->num_tx_queues = 1; - adapter->num_rx_queues = min(IGB_MAX_RX_QUEUES, num_online_cpus()); + adapter->num_rx_queues = min((u32)IGB_MAX_RX_QUEUES, (u32)num_online_cpus()); + adapter->num_tx_queues = min(IGB_MAX_TX_QUEUES, num_online_cpus()); + /* This call may decrease the number of queues depending on + * interrupt mode. */ igb_set_interrupt_capability(adapter); if (igb_alloc_queues(adapter)) { @@ -1270,15 +1485,16 @@ static int igb_open(struct net_device *netdev) /* From here on the code is the same as igb_up() */ clear_bit(__IGB_DOWN, &adapter->state); - napi_enable(&adapter->napi); - if (adapter->msix_entries) - for (i = 0; i < adapter->num_rx_queues; i++) - napi_enable(&adapter->rx_ring[i].napi); - - igb_irq_enable(adapter); + for (i = 0; i < adapter->num_rx_queues; i++) + napi_enable(&adapter->rx_ring[i].napi); /* Clear any pending interrupts. */ rd32(E1000_ICR); + + igb_irq_enable(adapter); + + netif_tx_start_all_queues(netdev); + /* Fire a link status change interrupt to start the watchdog. */ wr32(E1000_ICS, E1000_ICS_LSC); @@ -1364,8 +1580,6 @@ int igb_setup_tx_resources(struct igb_adapter *adapter, tx_ring->adapter = adapter; tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; - spin_lock_init(&tx_ring->tx_clean_lock); - spin_lock_init(&tx_ring->tx_lock); return 0; err: @@ -1385,6 +1599,7 @@ err: static int igb_setup_all_tx_resources(struct igb_adapter *adapter) { int i, err = 0; + int r_idx; for (i = 0; i < adapter->num_tx_queues; i++) { err = igb_setup_tx_resources(adapter, &adapter->tx_ring[i]); @@ -1392,12 +1607,15 @@ static int igb_setup_all_tx_resources(struct igb_adapter *adapter) dev_err(&adapter->pdev->dev, "Allocation for Tx Queue %u failed\n", i); for (i--; i >= 0; i--) - igb_free_tx_resources(adapter, - &adapter->tx_ring[i]); + igb_free_tx_resources(&adapter->tx_ring[i]); break; } } + for (i = 0; i < IGB_MAX_TX_QUEUES; i++) { + r_idx = i % adapter->num_tx_queues; + adapter->multi_tx_table[i] = &adapter->tx_ring[r_idx]; + } return err; } @@ -1484,6 +1702,14 @@ int igb_setup_rx_resources(struct igb_adapter *adapter, struct pci_dev *pdev = adapter->pdev; int size, desc_len; +#ifdef CONFIG_IGB_LRO + size = sizeof(struct net_lro_desc) * MAX_LRO_DESCRIPTORS; + rx_ring->lro_mgr.lro_arr = vmalloc(size); + if (!rx_ring->lro_mgr.lro_arr) + goto err; + memset(rx_ring->lro_mgr.lro_arr, 0, size); +#endif + size = sizeof(struct igb_buffer) * rx_ring->count; rx_ring->buffer_info = vmalloc(size); if (!rx_ring->buffer_info) @@ -1504,15 +1730,16 @@ int igb_setup_rx_resources(struct igb_adapter *adapter, rx_ring->next_to_clean = 0; rx_ring->next_to_use = 0; - rx_ring->pending_skb = NULL; rx_ring->adapter = adapter; - /* FIXME: do we want to setup ring->napi->poll here? */ - rx_ring->napi.poll = adapter->napi.poll; return 0; err: +#ifdef CONFIG_IGB_LRO + vfree(rx_ring->lro_mgr.lro_arr); + rx_ring->lro_mgr.lro_arr = NULL; +#endif vfree(rx_ring->buffer_info); dev_err(&adapter->pdev->dev, "Unable to allocate memory for " "the receive descriptor ring\n"); @@ -1536,8 +1763,7 @@ static int igb_setup_all_rx_resources(struct igb_adapter *adapter) dev_err(&adapter->pdev->dev, "Allocation for Rx Queue %u failed\n", i); for (i--; i >= 0; i--) - igb_free_rx_resources(adapter, - &adapter->rx_ring[i]); + igb_free_rx_resources(&adapter->rx_ring[i]); break; } } @@ -1564,10 +1790,12 @@ static void igb_setup_rctl(struct igb_adapter *adapter) E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); - /* disable the stripping of CRC because it breaks - * BMC firmware connected over SMBUS - rctl |= E1000_RCTL_SECRC; + /* + * enable stripping of CRC. It's unlikely this will break BMC + * redirection as it did with e1000. Newer features require + * that the HW strips the CRC. */ + rctl |= E1000_RCTL_SECRC; rctl &= ~E1000_RCTL_SBP; @@ -1597,15 +1825,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter) rctl |= E1000_RCTL_SZ_2048; rctl &= ~E1000_RCTL_BSEX; break; - case IGB_RXBUFFER_4096: - rctl |= E1000_RCTL_SZ_4096; - break; - case IGB_RXBUFFER_8192: - rctl |= E1000_RCTL_SZ_8192; - break; - case IGB_RXBUFFER_16384: - rctl |= E1000_RCTL_SZ_16384; - break; } } else { rctl &= ~E1000_RCTL_BSEX; @@ -1623,10 +1842,8 @@ static void igb_setup_rctl(struct igb_adapter *adapter) * so only enable packet split for jumbo frames */ if (rctl & E1000_RCTL_LPE) { adapter->rx_ps_hdr_size = IGB_RXBUFFER_128; - srrctl = adapter->rx_ps_hdr_size << + srrctl |= adapter->rx_ps_hdr_size << E1000_SRRCTL_BSIZEHDRSIZE_SHIFT; - /* buffer size is ALWAYS one page */ - srrctl |= PAGE_SIZE >> E1000_SRRCTL_BSIZEPKT_SHIFT; srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; } else { adapter->rx_ps_hdr_size = 0; @@ -1660,8 +1877,7 @@ static void igb_configure_rx(struct igb_adapter *adapter) mdelay(10); if (adapter->itr_setting > 3) - wr32(E1000_ITR, - 1000000000 / (adapter->itr * 256)); + wr32(E1000_ITR, adapter->itr); /* Setup the HW Rx Head and Tail Descriptor Pointers and * the Base and Length of the Rx Descriptor Ring */ @@ -1686,6 +1902,16 @@ static void igb_configure_rx(struct igb_adapter *adapter) rxdctl |= IGB_RX_HTHRESH << 8; rxdctl |= IGB_RX_WTHRESH << 16; wr32(E1000_RXDCTL(i), rxdctl); +#ifdef CONFIG_IGB_LRO + /* Intitial LRO Settings */ + ring->lro_mgr.max_aggr = MAX_LRO_AGGR; + ring->lro_mgr.max_desc = MAX_LRO_DESCRIPTORS; + ring->lro_mgr.get_skb_header = igb_get_skb_hdr; + ring->lro_mgr.features = LRO_F_NAPI | LRO_F_EXTRACT_VLAN_ID; + ring->lro_mgr.dev = adapter->netdev; + ring->lro_mgr.ip_summed = CHECKSUM_UNNECESSARY; + ring->lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY; +#endif } if (adapter->num_rx_queues > 1) { @@ -1699,7 +1925,10 @@ static void igb_configure_rx(struct igb_adapter *adapter) get_random_bytes(&random[0], 40); - shift = 6; + if (hw->mac.type >= e1000_82576) + shift = 0; + else + shift = 6; for (j = 0; j < (32 * 4); j++) { reta.bytes[j & 3] = (j % adapter->num_rx_queues) << shift; @@ -1765,12 +1994,11 @@ static void igb_configure_rx(struct igb_adapter *adapter) * * Free all transmit software resources **/ -static void igb_free_tx_resources(struct igb_adapter *adapter, - struct igb_ring *tx_ring) +static void igb_free_tx_resources(struct igb_ring *tx_ring) { - struct pci_dev *pdev = adapter->pdev; + struct pci_dev *pdev = tx_ring->adapter->pdev; - igb_clean_tx_ring(adapter, tx_ring); + igb_clean_tx_ring(tx_ring); vfree(tx_ring->buffer_info); tx_ring->buffer_info = NULL; @@ -1791,7 +2019,7 @@ static void igb_free_all_tx_resources(struct igb_adapter *adapter) int i; for (i = 0; i < adapter->num_tx_queues; i++) - igb_free_tx_resources(adapter, &adapter->tx_ring[i]); + igb_free_tx_resources(&adapter->tx_ring[i]); } static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, @@ -1817,9 +2045,9 @@ static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter, * @adapter: board private structure * @tx_ring: ring to be cleaned **/ -static void igb_clean_tx_ring(struct igb_adapter *adapter, - struct igb_ring *tx_ring) +static void igb_clean_tx_ring(struct igb_ring *tx_ring) { + struct igb_adapter *adapter = tx_ring->adapter; struct igb_buffer *buffer_info; unsigned long size; unsigned int i; @@ -1856,7 +2084,7 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) int i; for (i = 0; i < adapter->num_tx_queues; i++) - igb_clean_tx_ring(adapter, &adapter->tx_ring[i]); + igb_clean_tx_ring(&adapter->tx_ring[i]); } /** @@ -1866,16 +2094,20 @@ static void igb_clean_all_tx_rings(struct igb_adapter *adapter) * * Free all receive software resources **/ -static void igb_free_rx_resources(struct igb_adapter *adapter, - struct igb_ring *rx_ring) +static void igb_free_rx_resources(struct igb_ring *rx_ring) { - struct pci_dev *pdev = adapter->pdev; + struct pci_dev *pdev = rx_ring->adapter->pdev; - igb_clean_rx_ring(adapter, rx_ring); + igb_clean_rx_ring(rx_ring); vfree(rx_ring->buffer_info); rx_ring->buffer_info = NULL; +#ifdef CONFIG_IGB_LRO + vfree(rx_ring->lro_mgr.lro_arr); + rx_ring->lro_mgr.lro_arr = NULL; +#endif + pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma); rx_ring->desc = NULL; @@ -1892,7 +2124,7 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) int i; for (i = 0; i < adapter->num_rx_queues; i++) - igb_free_rx_resources(adapter, &adapter->rx_ring[i]); + igb_free_rx_resources(&adapter->rx_ring[i]); } /** @@ -1900,9 +2132,9 @@ static void igb_free_all_rx_resources(struct igb_adapter *adapter) * @adapter: board private structure * @rx_ring: ring to free buffers from **/ -static void igb_clean_rx_ring(struct igb_adapter *adapter, - struct igb_ring *rx_ring) +static void igb_clean_rx_ring(struct igb_ring *rx_ring) { + struct igb_adapter *adapter = rx_ring->adapter; struct igb_buffer *buffer_info; struct pci_dev *pdev = adapter->pdev; unsigned long size; @@ -1930,20 +2162,17 @@ static void igb_clean_rx_ring(struct igb_adapter *adapter, buffer_info->skb = NULL; } if (buffer_info->page) { - pci_unmap_page(pdev, buffer_info->page_dma, - PAGE_SIZE, PCI_DMA_FROMDEVICE); + if (buffer_info->page_dma) + pci_unmap_page(pdev, buffer_info->page_dma, + PAGE_SIZE / 2, + PCI_DMA_FROMDEVICE); put_page(buffer_info->page); buffer_info->page = NULL; buffer_info->page_dma = 0; + buffer_info->page_offset = 0; } } - /* there also may be some cached data from a chained receive */ - if (rx_ring->pending_skb) { - dev_kfree_skb(rx_ring->pending_skb); - rx_ring->pending_skb = NULL; - } - size = sizeof(struct igb_buffer) * rx_ring->count; memset(rx_ring->buffer_info, 0, size); @@ -1966,7 +2195,7 @@ static void igb_clean_all_rx_rings(struct igb_adapter *adapter) int i; for (i = 0; i < adapter->num_rx_queues; i++) - igb_clean_rx_ring(adapter, &adapter->rx_ring[i]); + igb_clean_rx_ring(&adapter->rx_ring[i]); } /** @@ -2015,19 +2244,22 @@ static void igb_set_multi(struct net_device *netdev) rctl = rd32(E1000_RCTL); - if (netdev->flags & IFF_PROMISC) + if (netdev->flags & IFF_PROMISC) { rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); - else if (netdev->flags & IFF_ALLMULTI) { - rctl |= E1000_RCTL_MPE; - rctl &= ~E1000_RCTL_UPE; - } else - rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); - + rctl &= ~E1000_RCTL_VFE; + } else { + if (netdev->flags & IFF_ALLMULTI) { + rctl |= E1000_RCTL_MPE; + rctl &= ~E1000_RCTL_UPE; + } else + rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE); + rctl |= E1000_RCTL_VFE; + } wr32(E1000_RCTL, rctl); if (!netdev->mc_count) { /* nothing to program, so clear mc list */ - igb_update_mc_addr_list(hw, NULL, 0, 1, + igb_update_mc_addr_list_82575(hw, NULL, 0, 1, mac->rar_entry_count); return; } @@ -2045,7 +2277,8 @@ static void igb_set_multi(struct net_device *netdev) memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN); mc_ptr = mc_ptr->next; } - igb_update_mc_addr_list(hw, mta_list, i, 1, mac->rar_entry_count); + igb_update_mc_addr_list_82575(hw, mta_list, i, 1, + mac->rar_entry_count); kfree(mta_list); } @@ -2135,7 +2368,7 @@ static void igb_watchdog_task(struct work_struct *work) } netif_carrier_on(netdev); - netif_wake_queue(netdev); + netif_tx_wake_all_queues(netdev); if (!test_bit(__IGB_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, @@ -2147,7 +2380,7 @@ static void igb_watchdog_task(struct work_struct *work) adapter->link_duplex = 0; dev_info(&adapter->pdev->dev, "NIC Link is Down\n"); netif_carrier_off(netdev); - netif_stop_queue(netdev); + netif_tx_stop_all_queues(netdev); if (!test_bit(__IGB_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); @@ -2200,38 +2433,60 @@ enum latency_range { }; -static void igb_lower_rx_eitr(struct igb_adapter *adapter, - struct igb_ring *rx_ring) +/** + * igb_update_ring_itr - update the dynamic ITR value based on packet size + * + * Stores a new ITR value based on strictly on packet size. This + * algorithm is less sophisticated than that used in igb_update_itr, + * due to the difficulty of synchronizing statistics across multiple + * receive rings. The divisors and thresholds used by this fuction + * were determined based on theoretical maximum wire speed and testing + * data, in order to minimize response time while increasing bulk + * throughput. + * This functionality is controlled by the InterruptThrottleRate module + * parameter (see igb_param.c) + * NOTE: This function is called only when operating in a multiqueue + * receive environment. + * @rx_ring: pointer to ring + **/ +static void igb_update_ring_itr(struct igb_ring *rx_ring) { - struct e1000_hw *hw = &adapter->hw; - int new_val; + int new_val = rx_ring->itr_val; + int avg_wire_size = 0; + struct igb_adapter *adapter = rx_ring->adapter; - new_val = rx_ring->itr_val / 2; - if (new_val < IGB_MIN_DYN_ITR) - new_val = IGB_MIN_DYN_ITR; + if (!rx_ring->total_packets) + goto clear_counts; /* no packets, so don't do anything */ - if (new_val != rx_ring->itr_val) { - rx_ring->itr_val = new_val; - wr32(rx_ring->itr_register, - 1000000000 / (new_val * 256)); + /* For non-gigabit speeds, just fix the interrupt rate at 4000 + * ints/sec - ITR timer value of 120 ticks. + */ + if (adapter->link_speed != SPEED_1000) { + new_val = 120; + goto set_itr_val; } -} + avg_wire_size = rx_ring->total_bytes / rx_ring->total_packets; -static void igb_raise_rx_eitr(struct igb_adapter *adapter, - struct igb_ring *rx_ring) -{ - struct e1000_hw *hw = &adapter->hw; - int new_val; + /* Add 24 bytes to size to account for CRC, preamble, and gap */ + avg_wire_size += 24; - new_val = rx_ring->itr_val * 2; - if (new_val > IGB_MAX_DYN_ITR) - new_val = IGB_MAX_DYN_ITR; + /* Don't starve jumbo frames */ + avg_wire_size = min(avg_wire_size, 3000); + /* Give a little boost to mid-size frames */ + if ((avg_wire_size > 300) && (avg_wire_size < 1200)) + new_val = avg_wire_size / 3; + else + new_val = avg_wire_size / 2; + +set_itr_val: if (new_val != rx_ring->itr_val) { rx_ring->itr_val = new_val; - wr32(rx_ring->itr_register, - 1000000000 / (new_val * 256)); + rx_ring->set_itr = 1; } +clear_counts: + rx_ring->total_bytes = 0; + rx_ring->total_packets = 0; } /** @@ -2298,8 +2553,7 @@ update_itr_done: return retval; } -static void igb_set_itr(struct igb_adapter *adapter, u16 itr_register, - int rx_only) +static void igb_set_itr(struct igb_adapter *adapter) { u16 current_itr; u32 new_itr = adapter->itr; @@ -2315,26 +2569,23 @@ static void igb_set_itr(struct igb_adapter *adapter, u16 itr_register, adapter->rx_itr, adapter->rx_ring->total_packets, adapter->rx_ring->total_bytes); - /* conservative mode (itr 3) eliminates the lowest_latency setting */ - if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency) - adapter->rx_itr = low_latency; - if (!rx_only) { + if (adapter->rx_ring->buddy) { adapter->tx_itr = igb_update_itr(adapter, adapter->tx_itr, adapter->tx_ring->total_packets, adapter->tx_ring->total_bytes); - /* conservative mode (itr 3) eliminates the - * lowest_latency setting */ - if (adapter->itr_setting == 3 && - adapter->tx_itr == lowest_latency) - adapter->tx_itr = low_latency; current_itr = max(adapter->rx_itr, adapter->tx_itr); } else { current_itr = adapter->rx_itr; } + /* conservative mode (itr 3) eliminates the lowest_latency setting */ + if (adapter->itr_setting == 3 && + current_itr == lowest_latency) + current_itr = low_latency; + switch (current_itr) { /* counts and packets in update_itr are dependent on these numbers */ case lowest_latency: @@ -2351,6 +2602,13 @@ static void igb_set_itr(struct igb_adapter *adapter, u16 itr_register, } set_itr_now: + adapter->rx_ring->total_bytes = 0; + adapter->rx_ring->total_packets = 0; + if (adapter->rx_ring->buddy) { + adapter->rx_ring->buddy->total_bytes = 0; + adapter->rx_ring->buddy->total_packets = 0; + } + if (new_itr != adapter->itr) { /* this attempts to bias the interrupt rate towards Bulk * by adding intermediate steps when interrupt rate is @@ -2365,7 +2623,8 @@ set_itr_now: * ends up being correct. */ adapter->itr = new_itr; - adapter->set_itr = 1; + adapter->rx_ring->itr_val = 1000000000 / (new_itr * 256); + adapter->rx_ring->set_itr = 1; } return; @@ -2441,9 +2700,9 @@ static inline int igb_tso_adv(struct igb_adapter *adapter, mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT); mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT); - /* Context index must be unique per ring. Luckily, so is the interrupt - * mask value. */ - mss_l4len_idx |= tx_ring->eims_value >> 4; + /* Context index must be unique per ring. */ + if (adapter->flags & IGB_FLAG_NEED_CTX_IDX) + mss_l4len_idx |= tx_ring->queue_index << 4; context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); context_desc->seqnum_seed = 0; @@ -2507,8 +2766,9 @@ static inline bool igb_tx_csum_adv(struct igb_adapter *adapter, context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd); context_desc->seqnum_seed = 0; - context_desc->mss_l4len_idx = - cpu_to_le32(tx_ring->eims_value >> 4); + if (adapter->flags & IGB_FLAG_NEED_CTX_IDX) + context_desc->mss_l4len_idx = + cpu_to_le32(tx_ring->queue_index << 4); buffer_info->time_stamp = jiffies; buffer_info->dma = 0; @@ -2609,9 +2869,10 @@ static inline void igb_tx_queue_adv(struct igb_adapter *adapter, olinfo_status |= E1000_TXD_POPTS_TXSM << 8; } - if (tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_TSO | - IGB_TX_FLAGS_VLAN)) - olinfo_status |= tx_ring->eims_value >> 4; + if ((adapter->flags & IGB_FLAG_NEED_CTX_IDX) && + (tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_TSO | + IGB_TX_FLAGS_VLAN))) + olinfo_status |= tx_ring->queue_index << 4; olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT); @@ -2647,7 +2908,8 @@ static int __igb_maybe_stop_tx(struct net_device *netdev, { struct igb_adapter *adapter = netdev_priv(netdev); - netif_stop_queue(netdev); + netif_stop_subqueue(netdev, tx_ring->queue_index); + /* Herbert's original patch had: * smp_mb__after_netif_stop_queue(); * but since that doesn't exist yet, just open code it. */ @@ -2659,7 +2921,7 @@ static int __igb_maybe_stop_tx(struct net_device *netdev, return -EBUSY; /* A reprieve! */ - netif_start_queue(netdev); + netif_wake_subqueue(netdev, tx_ring->queue_index); ++adapter->restart_queue; return 0; } @@ -2681,7 +2943,6 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb, struct igb_adapter *adapter = netdev_priv(netdev); unsigned int tx_flags = 0; unsigned int len; - unsigned long irq_flags; u8 hdr_len = 0; int tso = 0; @@ -2697,10 +2958,6 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb, return NETDEV_TX_OK; } - if (!spin_trylock_irqsave(&tx_ring->tx_lock, irq_flags)) - /* Collision - tell upper layer to requeue */ - return NETDEV_TX_LOCKED; - /* need: 1 descriptor per page, * + 2 desc gap to keep tail from touching head, * + 1 desc for skb->data, @@ -2708,21 +2965,23 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb, * otherwise try next time */ if (igb_maybe_stop_tx(netdev, tx_ring, skb_shinfo(skb)->nr_frags + 4)) { /* this is a hard error */ - spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags); return NETDEV_TX_BUSY; } + skb_orphan(skb); if (adapter->vlgrp && vlan_tx_tag_present(skb)) { tx_flags |= IGB_TX_FLAGS_VLAN; tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT); } + if (skb->protocol == htons(ETH_P_IP)) + tx_flags |= IGB_TX_FLAGS_IPV4; + tso = skb_is_gso(skb) ? igb_tso_adv(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0; if (tso < 0) { dev_kfree_skb_any(skb); - spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags); return NETDEV_TX_OK; } @@ -2732,9 +2991,6 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb, if (skb->ip_summed == CHECKSUM_PARTIAL) tx_flags |= IGB_TX_FLAGS_CSUM; - if (skb->protocol == htons(ETH_P_IP)) - tx_flags |= IGB_TX_FLAGS_IPV4; - igb_tx_queue_adv(adapter, tx_ring, tx_flags, igb_tx_map_adv(adapter, tx_ring, skb), skb->len, hdr_len); @@ -2744,14 +3000,17 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb, /* Make sure there is space in the ring for the next send. */ igb_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 4); - spin_unlock_irqrestore(&tx_ring->tx_lock, irq_flags); return NETDEV_TX_OK; } static int igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *netdev) { struct igb_adapter *adapter = netdev_priv(netdev); - struct igb_ring *tx_ring = &adapter->tx_ring[0]; + struct igb_ring *tx_ring; + + int r_idx = 0; + r_idx = skb->queue_mapping & (IGB_MAX_TX_QUEUES - 1); + tx_ring = adapter->multi_tx_table[r_idx]; /* This goes back to the question of how to logically map a tx queue * to a flow. Right now, performance is impacted slightly negatively @@ -2846,7 +3105,11 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu) else if (max_frame <= IGB_RXBUFFER_2048) adapter->rx_buffer_len = IGB_RXBUFFER_2048; else - adapter->rx_buffer_len = IGB_RXBUFFER_4096; +#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384 + adapter->rx_buffer_len = IGB_RXBUFFER_16384; +#else + adapter->rx_buffer_len = PAGE_SIZE / 2; +#endif /* adjust allocation if LPE protects us, and we aren't using SBP */ if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)) @@ -3010,26 +3273,19 @@ static irqreturn_t igb_msix_other(int irq, void *data) struct net_device *netdev = data; struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 eicr; - /* disable interrupts from the "other" bit, avoid re-entry */ - wr32(E1000_EIMC, E1000_EIMS_OTHER); - - eicr = rd32(E1000_EICR); - - if (eicr & E1000_EIMS_OTHER) { - u32 icr = rd32(E1000_ICR); - /* reading ICR causes bit 31 of EICR to be cleared */ - if (!(icr & E1000_ICR_LSC)) - goto no_link_interrupt; - hw->mac.get_link_status = 1; - /* guard against interrupt when we're going down */ - if (!test_bit(__IGB_DOWN, &adapter->state)) - mod_timer(&adapter->watchdog_timer, jiffies + 1); - } + u32 icr = rd32(E1000_ICR); + /* reading ICR causes bit 31 of EICR to be cleared */ + if (!(icr & E1000_ICR_LSC)) + goto no_link_interrupt; + hw->mac.get_link_status = 1; + /* guard against interrupt when we're going down */ + if (!test_bit(__IGB_DOWN, &adapter->state)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); + no_link_interrupt: wr32(E1000_IMS, E1000_IMS_LSC); - wr32(E1000_EIMS, E1000_EIMS_OTHER); + wr32(E1000_EIMS, adapter->eims_other); return IRQ_HANDLED; } @@ -3040,44 +3296,186 @@ static irqreturn_t igb_msix_tx(int irq, void *data) struct igb_adapter *adapter = tx_ring->adapter; struct e1000_hw *hw = &adapter->hw; - if (!tx_ring->itr_val) - wr32(E1000_EIMC, tx_ring->eims_value); - +#ifdef CONFIG_DCA + if (adapter->flags & IGB_FLAG_DCA_ENABLED) + igb_update_tx_dca(tx_ring); +#endif tx_ring->total_bytes = 0; tx_ring->total_packets = 0; - if (!igb_clean_tx_irq(adapter, tx_ring)) + + /* auto mask will automatically reenable the interrupt when we write + * EICS */ + if (!igb_clean_tx_irq(tx_ring)) /* Ring was not completely cleaned, so fire another interrupt */ wr32(E1000_EICS, tx_ring->eims_value); - - if (!tx_ring->itr_val) + else wr32(E1000_EIMS, tx_ring->eims_value); + return IRQ_HANDLED; } +static void igb_write_itr(struct igb_ring *ring) +{ + struct e1000_hw *hw = &ring->adapter->hw; + if ((ring->adapter->itr_setting & 3) && ring->set_itr) { + switch (hw->mac.type) { + case e1000_82576: + wr32(ring->itr_register, + ring->itr_val | + 0x80000000); + break; + default: + wr32(ring->itr_register, + ring->itr_val | + (ring->itr_val << 16)); + break; + } + ring->set_itr = 0; + } +} + static irqreturn_t igb_msix_rx(int irq, void *data) { struct igb_ring *rx_ring = data; struct igb_adapter *adapter = rx_ring->adapter; - struct e1000_hw *hw = &adapter->hw; - if (!rx_ring->itr_val) - wr32(E1000_EIMC, rx_ring->eims_value); + /* Write the ITR value calculated at the end of the + * previous interrupt. + */ + + igb_write_itr(rx_ring); - if (netif_rx_schedule_prep(adapter->netdev, &rx_ring->napi)) { - rx_ring->total_bytes = 0; - rx_ring->total_packets = 0; - rx_ring->no_itr_adjust = 0; + if (netif_rx_schedule_prep(adapter->netdev, &rx_ring->napi)) __netif_rx_schedule(adapter->netdev, &rx_ring->napi); - } else { - if (!rx_ring->no_itr_adjust) { - igb_lower_rx_eitr(adapter, rx_ring); - rx_ring->no_itr_adjust = 1; + +#ifdef CONFIG_DCA + if (adapter->flags & IGB_FLAG_DCA_ENABLED) + igb_update_rx_dca(rx_ring); +#endif + return IRQ_HANDLED; +} + +#ifdef CONFIG_DCA +static void igb_update_rx_dca(struct igb_ring *rx_ring) +{ + u32 dca_rxctrl; + struct igb_adapter *adapter = rx_ring->adapter; + struct e1000_hw *hw = &adapter->hw; + int cpu = get_cpu(); + int q = rx_ring - adapter->rx_ring; + + if (rx_ring->cpu != cpu) { + dca_rxctrl = rd32(E1000_DCA_RXCTRL(q)); + if (hw->mac.type == e1000_82576) { + dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576; + dca_rxctrl |= dca_get_tag(cpu) << + E1000_DCA_RXCTRL_CPUID_SHIFT; + } else { + dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK; + dca_rxctrl |= dca_get_tag(cpu); } + dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN; + dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN; + dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN; + wr32(E1000_DCA_RXCTRL(q), dca_rxctrl); + rx_ring->cpu = cpu; } + put_cpu(); +} - return IRQ_HANDLED; +static void igb_update_tx_dca(struct igb_ring *tx_ring) +{ + u32 dca_txctrl; + struct igb_adapter *adapter = tx_ring->adapter; + struct e1000_hw *hw = &adapter->hw; + int cpu = get_cpu(); + int q = tx_ring - adapter->tx_ring; + + if (tx_ring->cpu != cpu) { + dca_txctrl = rd32(E1000_DCA_TXCTRL(q)); + if (hw->mac.type == e1000_82576) { + dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576; + dca_txctrl |= dca_get_tag(cpu) << + E1000_DCA_TXCTRL_CPUID_SHIFT; + } else { + dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK; + dca_txctrl |= dca_get_tag(cpu); + } + dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN; + wr32(E1000_DCA_TXCTRL(q), dca_txctrl); + tx_ring->cpu = cpu; + } + put_cpu(); +} + +static void igb_setup_dca(struct igb_adapter *adapter) +{ + int i; + + if (!(adapter->flags & IGB_FLAG_DCA_ENABLED)) + return; + + for (i = 0; i < adapter->num_tx_queues; i++) { + adapter->tx_ring[i].cpu = -1; + igb_update_tx_dca(&adapter->tx_ring[i]); + } + for (i = 0; i < adapter->num_rx_queues; i++) { + adapter->rx_ring[i].cpu = -1; + igb_update_rx_dca(&adapter->rx_ring[i]); + } +} + +static int __igb_notify_dca(struct device *dev, void *data) +{ + struct net_device *netdev = dev_get_drvdata(dev); + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; + unsigned long event = *(unsigned long *)data; + + if (!(adapter->flags & IGB_FLAG_HAS_DCA)) + goto out; + + switch (event) { + case DCA_PROVIDER_ADD: + /* if already enabled, don't do it again */ + if (adapter->flags & IGB_FLAG_DCA_ENABLED) + break; + adapter->flags |= IGB_FLAG_DCA_ENABLED; + /* Always use CB2 mode, difference is masked + * in the CB driver. */ + wr32(E1000_DCA_CTRL, 2); + if (dca_add_requester(dev) == 0) { + dev_info(&adapter->pdev->dev, "DCA enabled\n"); + igb_setup_dca(adapter); + break; + } + /* Fall Through since DCA is disabled. */ + case DCA_PROVIDER_REMOVE: + if (adapter->flags & IGB_FLAG_DCA_ENABLED) { + /* without this a class_device is left + * hanging around in the sysfs model */ + dca_remove_requester(dev); + dev_info(&adapter->pdev->dev, "DCA disabled\n"); + adapter->flags &= ~IGB_FLAG_DCA_ENABLED; + wr32(E1000_DCA_CTRL, 1); + } + break; + } +out: + return 0; } +static int igb_notify_dca(struct notifier_block *nb, unsigned long event, + void *p) +{ + int ret_val; + + ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event, + __igb_notify_dca); + + return ret_val ? NOTIFY_BAD : NOTIFY_DONE; +} +#endif /* CONFIG_DCA */ /** * igb_intr_msi - Interrupt Handler @@ -3088,34 +3486,19 @@ static irqreturn_t igb_intr_msi(int irq, void *data) { struct net_device *netdev = data; struct igb_adapter *adapter = netdev_priv(netdev); - struct napi_struct *napi = &adapter->napi; struct e1000_hw *hw = &adapter->hw; /* read ICR disables interrupts using IAM */ u32 icr = rd32(E1000_ICR); - /* Write the ITR value calculated at the end of the - * previous interrupt. - */ - if (adapter->set_itr) { - wr32(E1000_ITR, - 1000000000 / (adapter->itr * 256)); - adapter->set_itr = 0; - } + igb_write_itr(adapter->rx_ring); - /* read ICR disables interrupts using IAM */ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { hw->mac.get_link_status = 1; if (!test_bit(__IGB_DOWN, &adapter->state)) mod_timer(&adapter->watchdog_timer, jiffies + 1); } - if (netif_rx_schedule_prep(netdev, napi)) { - adapter->tx_ring->total_bytes = 0; - adapter->tx_ring->total_packets = 0; - adapter->rx_ring->total_bytes = 0; - adapter->rx_ring->total_packets = 0; - __netif_rx_schedule(netdev, napi); - } + netif_rx_schedule(netdev, &adapter->rx_ring[0].napi); return IRQ_HANDLED; } @@ -3129,7 +3512,6 @@ static irqreturn_t igb_intr(int irq, void *data) { struct net_device *netdev = data; struct igb_adapter *adapter = netdev_priv(netdev); - struct napi_struct *napi = &adapter->napi; struct e1000_hw *hw = &adapter->hw; /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No * need for the IMC write */ @@ -3138,14 +3520,7 @@ static irqreturn_t igb_intr(int irq, void *data) if (!icr) return IRQ_NONE; /* Not our interrupt */ - /* Write the ITR value calculated at the end of the - * previous interrupt. - */ - if (adapter->set_itr) { - wr32(E1000_ITR, - 1000000000 / (adapter->itr * 256)); - adapter->set_itr = 0; - } + igb_write_itr(adapter->rx_ring); /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is * not set, then the adapter didn't send an interrupt */ @@ -3161,57 +3536,41 @@ static irqreturn_t igb_intr(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } - if (netif_rx_schedule_prep(netdev, napi)) { - adapter->tx_ring->total_bytes = 0; - adapter->rx_ring->total_bytes = 0; - adapter->tx_ring->total_packets = 0; - adapter->rx_ring->total_packets = 0; - __netif_rx_schedule(netdev, napi); - } + netif_rx_schedule(netdev, &adapter->rx_ring[0].napi); return IRQ_HANDLED; } /** - * igb_clean - NAPI Rx polling callback - * @adapter: board private structure + * igb_poll - NAPI Rx polling callback + * @napi: napi polling structure + * @budget: count of how many packets we should handle **/ -static int igb_clean(struct napi_struct *napi, int budget) +static int igb_poll(struct napi_struct *napi, int budget) { - struct igb_adapter *adapter = container_of(napi, struct igb_adapter, - napi); + struct igb_ring *rx_ring = container_of(napi, struct igb_ring, napi); + struct igb_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; - int tx_clean_complete = 1, work_done = 0; - int i; - - /* Must NOT use netdev_priv macro here. */ - adapter = netdev->priv; + int tx_clean_complete, work_done = 0; - /* Keep link state information with original netdev */ - if (!netif_carrier_ok(netdev)) - goto quit_polling; - - /* igb_clean is called per-cpu. This lock protects tx_ring[i] from - * being cleaned by multiple cpus simultaneously. A failure obtaining - * the lock means tx_ring[i] is currently being cleaned anyway. */ - for (i = 0; i < adapter->num_tx_queues; i++) { - if (spin_trylock(&adapter->tx_ring[i].tx_clean_lock)) { - tx_clean_complete &= igb_clean_tx_irq(adapter, - &adapter->tx_ring[i]); - spin_unlock(&adapter->tx_ring[i].tx_clean_lock); - } - } + /* this poll routine only supports one tx and one rx queue */ +#ifdef CONFIG_DCA + if (adapter->flags & IGB_FLAG_DCA_ENABLED) + igb_update_tx_dca(&adapter->tx_ring[0]); +#endif + tx_clean_complete = igb_clean_tx_irq(&adapter->tx_ring[0]); - for (i = 0; i < adapter->num_rx_queues; i++) - igb_clean_rx_irq_adv(adapter, &adapter->rx_ring[i], &work_done, - adapter->rx_ring[i].napi.weight); +#ifdef CONFIG_DCA + if (adapter->flags & IGB_FLAG_DCA_ENABLED) + igb_update_rx_dca(&adapter->rx_ring[0]); +#endif + igb_clean_rx_irq_adv(&adapter->rx_ring[0], &work_done, budget); /* If no Tx and not enough Rx work done, exit the polling mode */ if ((tx_clean_complete && (work_done < budget)) || !netif_running(netdev)) { -quit_polling: if (adapter->itr_setting & 3) - igb_set_itr(adapter, E1000_ITR, false); + igb_set_itr(adapter); netif_rx_complete(netdev, napi); if (!test_bit(__IGB_DOWN, &adapter->state)) igb_irq_enable(adapter); @@ -3233,7 +3592,11 @@ static int igb_clean_rx_ring_msix(struct napi_struct *napi, int budget) if (!netif_carrier_ok(netdev)) goto quit_polling; - igb_clean_rx_irq_adv(adapter, rx_ring, &work_done, budget); +#ifdef CONFIG_DCA + if (adapter->flags & IGB_FLAG_DCA_ENABLED) + igb_update_rx_dca(rx_ring); +#endif + igb_clean_rx_irq_adv(rx_ring, &work_done, budget); /* If not enough Rx work done, exit the polling mode */ @@ -3241,16 +3604,16 @@ static int igb_clean_rx_ring_msix(struct napi_struct *napi, int budget) quit_polling: netif_rx_complete(netdev, napi); - wr32(E1000_EIMS, rx_ring->eims_value); - if ((adapter->itr_setting & 3) && !rx_ring->no_itr_adjust && - (rx_ring->total_packets > IGB_DYN_ITR_PACKET_THRESHOLD)) { - int mean_size = rx_ring->total_bytes / - rx_ring->total_packets; - if (mean_size < IGB_DYN_ITR_LENGTH_LOW) - igb_raise_rx_eitr(adapter, rx_ring); - else if (mean_size > IGB_DYN_ITR_LENGTH_HIGH) - igb_lower_rx_eitr(adapter, rx_ring); + if (adapter->itr_setting & 3) { + if (adapter->num_rx_queues == 1) + igb_set_itr(adapter); + else + igb_update_ring_itr(rx_ring); } + + if (!test_bit(__IGB_DOWN, &adapter->state)) + wr32(E1000_EIMS, rx_ring->eims_value); + return 0; } @@ -3268,11 +3631,11 @@ static inline u32 get_head(struct igb_ring *tx_ring) * @adapter: board private structure * returns true if ring is completely cleaned **/ -static bool igb_clean_tx_irq(struct igb_adapter *adapter, - struct igb_ring *tx_ring) +static bool igb_clean_tx_irq(struct igb_ring *tx_ring) { - struct net_device *netdev = adapter->netdev; + struct igb_adapter *adapter = tx_ring->adapter; struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; struct e1000_tx_desc *tx_desc; struct igb_buffer *buffer_info; struct sk_buff *skb; @@ -3334,9 +3697,9 @@ done_cleaning: * sees the new next_to_clean. */ smp_mb(); - if (netif_queue_stopped(netdev) && + if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) && !(test_bit(__IGB_DOWN, &adapter->state))) { - netif_wake_queue(netdev); + netif_wake_subqueue(netdev, tx_ring->queue_index); ++adapter->restart_queue; } } @@ -3355,7 +3718,7 @@ done_cleaning: /* detected Tx unit hang */ dev_err(&adapter->pdev->dev, "Detected Tx Unit Hang\n" - " Tx Queue <%lu>\n" + " Tx Queue <%d>\n" " TDH <%x>\n" " TDT <%x>\n" " next_to_use <%x>\n" @@ -3365,8 +3728,7 @@ done_cleaning: " time_stamp <%lx>\n" " jiffies <%lx>\n" " desc.status <%x>\n", - (unsigned long)((tx_ring - adapter->tx_ring) / - sizeof(struct igb_ring)), + tx_ring->queue_index, readl(adapter->hw.hw_addr + tx_ring->head), readl(adapter->hw.hw_addr + tx_ring->tail), tx_ring->next_to_use, @@ -3375,33 +3737,87 @@ done_cleaning: tx_ring->buffer_info[i].time_stamp, jiffies, tx_desc->upper.fields.status); - netif_stop_queue(netdev); + netif_stop_subqueue(netdev, tx_ring->queue_index); } } tx_ring->total_bytes += total_bytes; tx_ring->total_packets += total_packets; + tx_ring->tx_stats.bytes += total_bytes; + tx_ring->tx_stats.packets += total_packets; adapter->net_stats.tx_bytes += total_bytes; adapter->net_stats.tx_packets += total_packets; return retval; } +#ifdef CONFIG_IGB_LRO + /** + * igb_get_skb_hdr - helper function for LRO header processing + * @skb: pointer to sk_buff to be added to LRO packet + * @iphdr: pointer to ip header structure + * @tcph: pointer to tcp header structure + * @hdr_flags: pointer to header flags + * @priv: pointer to the receive descriptor for the current sk_buff + **/ +static int igb_get_skb_hdr(struct sk_buff *skb, void **iphdr, void **tcph, + u64 *hdr_flags, void *priv) +{ + union e1000_adv_rx_desc *rx_desc = priv; + u16 pkt_type = rx_desc->wb.lower.lo_dword.pkt_info & + (E1000_RXDADV_PKTTYPE_IPV4 | E1000_RXDADV_PKTTYPE_TCP); + + /* Verify that this is a valid IPv4 TCP packet */ + if (pkt_type != (E1000_RXDADV_PKTTYPE_IPV4 | + E1000_RXDADV_PKTTYPE_TCP)) + return -1; + + /* Set network headers */ + skb_reset_network_header(skb); + skb_set_transport_header(skb, ip_hdrlen(skb)); + *iphdr = ip_hdr(skb); + *tcph = tcp_hdr(skb); + *hdr_flags = LRO_IPV4 | LRO_TCP; + + return 0; + +} +#endif /* CONFIG_IGB_LRO */ /** * igb_receive_skb - helper function to handle rx indications - * @adapter: board private structure + * @ring: pointer to receive ring receving this packet * @status: descriptor status field as written by hardware * @vlan: descriptor vlan field as written by hardware (no le/be conversion) * @skb: pointer to sk_buff to be indicated to stack **/ -static void igb_receive_skb(struct igb_adapter *adapter, u8 status, __le16 vlan, - struct sk_buff *skb) +static void igb_receive_skb(struct igb_ring *ring, u8 status, + union e1000_adv_rx_desc * rx_desc, + struct sk_buff *skb) { - if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) - vlan_hwaccel_receive_skb(skb, adapter->vlgrp, - le16_to_cpu(vlan) & - E1000_RXD_SPC_VLAN_MASK); - else - netif_receive_skb(skb); + struct igb_adapter * adapter = ring->adapter; + bool vlan_extracted = (adapter->vlgrp && (status & E1000_RXD_STAT_VP)); + +#ifdef CONFIG_IGB_LRO + if (adapter->netdev->features & NETIF_F_LRO && + skb->ip_summed == CHECKSUM_UNNECESSARY) { + if (vlan_extracted) + lro_vlan_hwaccel_receive_skb(&ring->lro_mgr, skb, + adapter->vlgrp, + le16_to_cpu(rx_desc->wb.upper.vlan), + rx_desc); + else + lro_receive_skb(&ring->lro_mgr,skb, rx_desc); + ring->lro_used = 1; + } else { +#endif + if (vlan_extracted) + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, + le16_to_cpu(rx_desc->wb.upper.vlan)); + else + + netif_receive_skb(skb); +#ifdef CONFIG_IGB_LRO + } +#endif } @@ -3427,16 +3843,16 @@ static inline void igb_rx_checksum_adv(struct igb_adapter *adapter, adapter->hw_csum_good++; } -static bool igb_clean_rx_irq_adv(struct igb_adapter *adapter, - struct igb_ring *rx_ring, - int *work_done, int budget) +static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, + int *work_done, int budget) { + struct igb_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_adv_rx_desc *rx_desc , *next_rxd; struct igb_buffer *buffer_info , *next_buffer; struct sk_buff *skb; - unsigned int i, j; + unsigned int i; u32 length, hlen, staterr; bool cleaned = false; int cleaned_count = 0; @@ -3466,64 +3882,48 @@ static bool igb_clean_rx_irq_adv(struct igb_adapter *adapter, cleaned = true; cleaned_count++; - if (rx_ring->pending_skb != NULL) { - skb = rx_ring->pending_skb; - rx_ring->pending_skb = NULL; - j = rx_ring->pending_skb_page; - } else { - skb = buffer_info->skb; - prefetch(skb->data - NET_IP_ALIGN); - buffer_info->skb = NULL; - if (hlen) { - pci_unmap_single(pdev, buffer_info->dma, - adapter->rx_ps_hdr_size + - NET_IP_ALIGN, - PCI_DMA_FROMDEVICE); - skb_put(skb, hlen); - } else { - pci_unmap_single(pdev, buffer_info->dma, - adapter->rx_buffer_len + - NET_IP_ALIGN, - PCI_DMA_FROMDEVICE); - skb_put(skb, length); - goto send_up; - } - j = 0; + skb = buffer_info->skb; + prefetch(skb->data - NET_IP_ALIGN); + buffer_info->skb = NULL; + if (!adapter->rx_ps_hdr_size) { + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_buffer_len + + NET_IP_ALIGN, + PCI_DMA_FROMDEVICE); + skb_put(skb, length); + goto send_up; + } + + if (!skb_shinfo(skb)->nr_frags) { + pci_unmap_single(pdev, buffer_info->dma, + adapter->rx_ps_hdr_size + + NET_IP_ALIGN, + PCI_DMA_FROMDEVICE); + skb_put(skb, hlen); } - while (length) { + if (length) { pci_unmap_page(pdev, buffer_info->page_dma, - PAGE_SIZE, PCI_DMA_FROMDEVICE); + PAGE_SIZE / 2, PCI_DMA_FROMDEVICE); buffer_info->page_dma = 0; - skb_fill_page_desc(skb, j, buffer_info->page, - 0, length); - buffer_info->page = NULL; + + skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags++, + buffer_info->page, + buffer_info->page_offset, + length); + + if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) || + (page_count(buffer_info->page) != 1)) + buffer_info->page = NULL; + else + get_page(buffer_info->page); skb->len += length; skb->data_len += length; - skb->truesize += length; - rx_desc->wb.upper.status_error = 0; - if (staterr & E1000_RXD_STAT_EOP) - break; - j++; - cleaned_count++; - i++; - if (i == rx_ring->count) - i = 0; - - buffer_info = &rx_ring->buffer_info[i]; - rx_desc = E1000_RX_DESC_ADV(*rx_ring, i); - staterr = le32_to_cpu(rx_desc->wb.upper.status_error); - length = le16_to_cpu(rx_desc->wb.upper.length); - if (!(staterr & E1000_RXD_STAT_DD)) { - rx_ring->pending_skb = skb; - rx_ring->pending_skb_page = j; - goto out; - } + skb->truesize += length; } send_up: - pskb_trim(skb, skb->len - 4); i++; if (i == rx_ring->count) i = 0; @@ -3531,11 +3931,16 @@ send_up: prefetch(next_rxd); next_buffer = &rx_ring->buffer_info[i]; + if (!(staterr & E1000_RXD_STAT_EOP)) { + buffer_info->skb = xchg(&next_buffer->skb, skb); + buffer_info->dma = xchg(&next_buffer->dma, 0); + goto next_desc; + } + if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { dev_kfree_skb_irq(skb); goto next_desc; } - rx_ring->no_itr_adjust |= (staterr & E1000_RXD_STAT_DYNINT); total_bytes += skb->len; total_packets++; @@ -3544,7 +3949,7 @@ send_up: skb->protocol = eth_type_trans(skb, netdev); - igb_receive_skb(adapter, staterr, rx_desc->wb.upper.vlan, skb); + igb_receive_skb(rx_ring, staterr, rx_desc, skb); netdev->last_rx = jiffies; @@ -3553,8 +3958,7 @@ next_desc: /* return some buffers to hardware, one at a time is too slow */ if (cleaned_count >= IGB_RX_BUFFER_WRITE) { - igb_alloc_rx_buffers_adv(adapter, rx_ring, - cleaned_count); + igb_alloc_rx_buffers_adv(rx_ring, cleaned_count); cleaned_count = 0; } @@ -3564,12 +3968,19 @@ next_desc: staterr = le32_to_cpu(rx_desc->wb.upper.status_error); } -out: + rx_ring->next_to_clean = i; cleaned_count = IGB_DESC_UNUSED(rx_ring); +#ifdef CONFIG_IGB_LRO + if (rx_ring->lro_used) { + lro_flush_all(&rx_ring->lro_mgr); + rx_ring->lro_used = 0; + } +#endif + if (cleaned_count) - igb_alloc_rx_buffers_adv(adapter, rx_ring, cleaned_count); + igb_alloc_rx_buffers_adv(rx_ring, cleaned_count); rx_ring->total_packets += total_packets; rx_ring->total_bytes += total_bytes; @@ -3585,10 +3996,10 @@ out: * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split * @adapter: address of board private structure **/ -static void igb_alloc_rx_buffers_adv(struct igb_adapter *adapter, - struct igb_ring *rx_ring, +static void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, int cleaned_count) { + struct igb_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; union e1000_adv_rx_desc *rx_desc; @@ -3602,16 +4013,22 @@ static void igb_alloc_rx_buffers_adv(struct igb_adapter *adapter, while (cleaned_count--) { rx_desc = E1000_RX_DESC_ADV(*rx_ring, i); - if (adapter->rx_ps_hdr_size && !buffer_info->page) { - buffer_info->page = alloc_page(GFP_ATOMIC); + if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) { if (!buffer_info->page) { - adapter->alloc_rx_buff_failed++; - goto no_buffers; + buffer_info->page = alloc_page(GFP_ATOMIC); + if (!buffer_info->page) { + adapter->alloc_rx_buff_failed++; + goto no_buffers; + } + buffer_info->page_offset = 0; + } else { + buffer_info->page_offset ^= PAGE_SIZE / 2; } buffer_info->page_dma = pci_map_page(pdev, buffer_info->page, - 0, PAGE_SIZE, + buffer_info->page_offset, + PAGE_SIZE / 2, PCI_DMA_FROMDEVICE); } @@ -3746,7 +4163,6 @@ static void igb_vlan_rx_register(struct net_device *netdev, /* enable VLAN receive filtering */ rctl = rd32(E1000_RCTL); - rctl |= E1000_RCTL_VFE; rctl &= ~E1000_RCTL_CFIEN; wr32(E1000_RCTL, rctl); igb_update_mng_vlan(adapter); @@ -3758,10 +4174,6 @@ static void igb_vlan_rx_register(struct net_device *netdev, ctrl &= ~E1000_CTRL_VME; wr32(E1000_CTRL, ctrl); - /* disable VLAN filtering */ - rctl = rd32(E1000_RCTL); - rctl &= ~E1000_RCTL_VFE; - wr32(E1000_RCTL, rctl); if (adapter->mng_vlan_id != (u16)IGB_MNG_VLAN_NONE) { igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); adapter->mng_vlan_id = IGB_MNG_VLAN_NONE; @@ -3878,7 +4290,7 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state) struct net_device *netdev = pci_get_drvdata(pdev); struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 ctrl, ctrl_ext, rctl, status; + u32 ctrl, rctl, status; u32 wufc = adapter->wol; #ifdef CONFIG_PM int retval = 0; @@ -3886,11 +4298,12 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_detach(netdev); - if (netif_running(netdev)) { - WARN_ON(test_bit(__IGB_RESETTING, &adapter->state)); - igb_down(adapter); - igb_free_irq(adapter); - } + if (netif_running(netdev)) + igb_close(netdev); + + igb_reset_interrupt_capability(adapter); + + igb_free_queues(adapter); #ifdef CONFIG_PM retval = pci_save_state(pdev); @@ -3921,33 +4334,24 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state) ctrl |= E1000_CTRL_ADVD3WUC; wr32(E1000_CTRL, ctrl); - if (adapter->hw.phy.media_type == e1000_media_type_fiber || - adapter->hw.phy.media_type == - e1000_media_type_internal_serdes) { - /* keep the laser running in D3 */ - ctrl_ext = rd32(E1000_CTRL_EXT); - ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA; - wr32(E1000_CTRL_EXT, ctrl_ext); - } - /* Allow time for pending master requests to run */ igb_disable_pcie_master(&adapter->hw); wr32(E1000_WUC, E1000_WUC_PME_EN); wr32(E1000_WUFC, wufc); - pci_enable_wake(pdev, PCI_D3hot, 1); - pci_enable_wake(pdev, PCI_D3cold, 1); } else { wr32(E1000_WUC, 0); wr32(E1000_WUFC, 0); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); } - /* make sure adapter isn't asleep if manageability is enabled */ - if (adapter->en_mng_pt) { + /* make sure adapter isn't asleep if manageability/wol is enabled */ + if (wufc || adapter->en_mng_pt) { pci_enable_wake(pdev, PCI_D3hot, 1); pci_enable_wake(pdev, PCI_D3cold, 1); + } else { + igb_shutdown_fiber_serdes_link_82575(hw); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); } /* Release control of h/w to f/w. If f/w is AMT enabled, this @@ -3971,7 +4375,11 @@ static int igb_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - err = pci_enable_device(pdev); + + if (adapter->need_ioport) + err = pci_enable_device(pdev); + else + err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, "igb: Cannot enable PCI device from suspend\n"); @@ -3982,10 +4390,11 @@ static int igb_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); - if (netif_running(netdev)) { - err = igb_request_irq(adapter); - if (err) - return err; + igb_set_interrupt_capability(adapter); + + if (igb_alloc_queues(adapter)) { + dev_err(&pdev->dev, "Unable to allocate memory for queues\n"); + return -ENOMEM; } /* e1000_power_up_phy(adapter); */ @@ -3993,10 +4402,11 @@ static int igb_resume(struct pci_dev *pdev) igb_reset(adapter); wr32(E1000_WUS, ~0); - igb_init_manageability(adapter); - - if (netif_running(netdev)) - igb_up(adapter); + if (netif_running(netdev)) { + err = igb_open(netdev); + if (err) + return err; + } netif_device_attach(netdev); @@ -4026,14 +4436,17 @@ static void igb_netpoll(struct net_device *netdev) int work_done = 0; igb_irq_disable(adapter); + adapter->flags |= IGB_FLAG_IN_NETPOLL; + for (i = 0; i < adapter->num_tx_queues; i++) - igb_clean_tx_irq(adapter, &adapter->tx_ring[i]); + igb_clean_tx_irq(&adapter->tx_ring[i]); for (i = 0; i < adapter->num_rx_queues; i++) - igb_clean_rx_irq_adv(adapter, &adapter->rx_ring[i], + igb_clean_rx_irq_adv(&adapter->rx_ring[i], &work_done, adapter->rx_ring[i].napi.weight); + adapter->flags &= ~IGB_FLAG_IN_NETPOLL; igb_irq_enable(adapter); } #endif /* CONFIG_NET_POLL_CONTROLLER */ @@ -4074,8 +4487,13 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct igb_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; + int err; - if (pci_enable_device(pdev)) { + if (adapter->need_ioport) + err = pci_enable_device(pdev); + else + err = pci_enable_device_mem(pdev); + if (err) { dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; |