summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c')
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c111
1 files changed, 70 insertions, 41 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index 704babdbc8a2..435ed308d990 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -5,9 +5,11 @@
* Copyright (c) 2009 Secret Lab Technologies, Ltd.
* Copyright (c) 2010 - 2011 Michal Simek <monstr@monstr.eu>
* Copyright (c) 2010 - 2011 PetaLogix
+ * Copyright (c) 2019 SED Systems, a division of Calian Ltd.
* Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved.
*/
+#include <linux/clk.h>
#include <linux/of_address.h>
#include <linux/of_mdio.h>
#include <linux/jiffies.h>
@@ -16,10 +18,10 @@
#include "xilinx_axienet.h"
#define MAX_MDIO_FREQ 2500000 /* 2.5 MHz */
-#define DEFAULT_CLOCK_DIVISOR XAE_MDIO_DIV_DFT
+#define DEFAULT_HOST_CLOCK 150000000 /* 150 MHz */
/* Wait till MDIO interface is ready to accept a new transaction.*/
-int axienet_mdio_wait_until_ready(struct axienet_local *lp)
+static int axienet_mdio_wait_until_ready(struct axienet_local *lp)
{
u32 val;
@@ -112,23 +114,42 @@ static int axienet_mdio_write(struct mii_bus *bus, int phy_id, int reg,
}
/**
- * axienet_mdio_setup - MDIO setup function
+ * axienet_mdio_enable - MDIO hardware setup function
* @lp: Pointer to axienet local data structure.
- * @np: Pointer to device node
*
- * Return: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
- * mdiobus_alloc (to allocate memory for mii bus structure) fails.
+ * Return: 0 on success, -ETIMEDOUT on a timeout.
*
* Sets up the MDIO interface by initializing the MDIO clock and enabling the
- * MDIO interface in hardware. Register the MDIO interface.
+ * MDIO interface in hardware.
**/
-int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
+int axienet_mdio_enable(struct axienet_local *lp)
{
- int ret;
u32 clk_div, host_clock;
- struct mii_bus *bus;
- struct resource res;
- struct device_node *np1;
+
+ if (lp->clk) {
+ host_clock = clk_get_rate(lp->clk);
+ } else {
+ struct device_node *np1;
+
+ /* Legacy fallback: detect CPU clock frequency and use as AXI
+ * bus clock frequency. This only works on certain platforms.
+ */
+ np1 = of_find_node_by_name(NULL, "cpu");
+ if (!np1) {
+ netdev_warn(lp->ndev, "Could not find CPU device node.\n");
+ host_clock = DEFAULT_HOST_CLOCK;
+ } else {
+ int ret = of_property_read_u32(np1, "clock-frequency",
+ &host_clock);
+ if (ret) {
+ netdev_warn(lp->ndev, "CPU clock-frequency property not found.\n");
+ host_clock = DEFAULT_HOST_CLOCK;
+ }
+ of_node_put(np1);
+ }
+ netdev_info(lp->ndev, "Setting assumed host clock to %u\n",
+ host_clock);
+ }
/* clk_div can be calculated by deriving it from the equation:
* fMDIO = fHOST / ((1 + clk_div) * 2)
@@ -155,25 +176,6 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
* "clock-frequency" from the CPU
*/
- np1 = of_find_node_by_name(NULL, "cpu");
- if (!np1) {
- netdev_warn(lp->ndev, "Could not find CPU device node.\n");
- netdev_warn(lp->ndev,
- "Setting MDIO clock divisor to default %d\n",
- DEFAULT_CLOCK_DIVISOR);
- clk_div = DEFAULT_CLOCK_DIVISOR;
- goto issue;
- }
- if (of_property_read_u32(np1, "clock-frequency", &host_clock)) {
- netdev_warn(lp->ndev, "clock-frequency property not found.\n");
- netdev_warn(lp->ndev,
- "Setting MDIO clock divisor to default %d\n",
- DEFAULT_CLOCK_DIVISOR);
- clk_div = DEFAULT_CLOCK_DIVISOR;
- of_node_put(np1);
- goto issue;
- }
-
clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
/* If there is any remainder from the division of
* fHOST / (MAX_MDIO_FREQ * 2), then we need to add
@@ -186,12 +188,39 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
"Setting MDIO clock divisor to %u/%u Hz host clock.\n",
clk_div, host_clock);
- of_node_put(np1);
-issue:
- axienet_iow(lp, XAE_MDIO_MC_OFFSET,
- (((u32) clk_div) | XAE_MDIO_MC_MDIOEN_MASK));
+ axienet_iow(lp, XAE_MDIO_MC_OFFSET, clk_div | XAE_MDIO_MC_MDIOEN_MASK);
- ret = axienet_mdio_wait_until_ready(lp);
+ return axienet_mdio_wait_until_ready(lp);
+}
+
+/**
+ * axienet_mdio_disable - MDIO hardware disable function
+ * @lp: Pointer to axienet local data structure.
+ *
+ * Disable the MDIO interface in hardware.
+ **/
+void axienet_mdio_disable(struct axienet_local *lp)
+{
+ axienet_iow(lp, XAE_MDIO_MC_OFFSET, 0);
+}
+
+/**
+ * axienet_mdio_setup - MDIO setup function
+ * @lp: Pointer to axienet local data structure.
+ *
+ * Return: 0 on success, -ETIMEDOUT on a timeout, -ENOMEM when
+ * mdiobus_alloc (to allocate memory for mii bus structure) fails.
+ *
+ * Sets up the MDIO interface by initializing the MDIO clock and enabling the
+ * MDIO interface in hardware. Register the MDIO interface.
+ **/
+int axienet_mdio_setup(struct axienet_local *lp)
+{
+ struct device_node *mdio_node;
+ struct mii_bus *bus;
+ int ret;
+
+ ret = axienet_mdio_enable(lp);
if (ret < 0)
return ret;
@@ -199,10 +228,8 @@ issue:
if (!bus)
return -ENOMEM;
- np1 = of_get_parent(lp->phy_node);
- of_address_to_resource(np1, 0, &res);
- snprintf(bus->id, MII_BUS_ID_SIZE, "%.8llx",
- (unsigned long long) res.start);
+ snprintf(bus->id, MII_BUS_ID_SIZE, "axienet-%.8llx",
+ (unsigned long long)lp->regs_start);
bus->priv = lp;
bus->name = "Xilinx Axi Ethernet MDIO";
@@ -211,7 +238,9 @@ issue:
bus->parent = lp->dev;
lp->mii_bus = bus;
- ret = of_mdiobus_register(bus, np1);
+ mdio_node = of_get_child_by_name(lp->dev->of_node, "mdio");
+ ret = of_mdiobus_register(bus, mdio_node);
+ of_node_put(mdio_node);
if (ret) {
mdiobus_free(bus);
lp->mii_bus = NULL;