summaryrefslogtreecommitdiff
path: root/drivers/net/can/c_can/c_can.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/c_can/c_can.c')
-rw-r--r--drivers/net/can/c_can/c_can.c153
1 files changed, 77 insertions, 76 deletions
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 6958830cb983..313793f6922d 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -132,7 +132,6 @@
/* For the high buffers we clear the interrupt bit and newdat */
#define IF_COMM_RCV_HIGH (IF_COMM_RCV_LOW | IF_COMM_CLR_NEWDAT)
-
/* Receive setup of message objects */
#define IF_COMM_RCV_SETUP (IF_COMM_MASK | IF_COMM_ARB | IF_COMM_CONTROL)
@@ -161,9 +160,7 @@
#define IF_MCONT_TX (IF_MCONT_TXIE | IF_MCONT_EOB)
-/*
- * Use IF1 for RX and IF2 for TX
- */
+/* Use IF1 for RX and IF2 for TX */
#define IF_RX 0
#define IF_TX 1
@@ -173,9 +170,6 @@
/* Wait for ~1 sec for INIT bit */
#define INIT_WAIT_MS 1000
-/* napi related */
-#define C_CAN_NAPI_WEIGHT C_CAN_MSG_OBJ_RX_NUM
-
/* c_can lec values */
enum c_can_lec_type {
LEC_NO_ERROR = 0,
@@ -189,8 +183,7 @@ enum c_can_lec_type {
LEC_MASK = LEC_UNUSED,
};
-/*
- * c_can error types:
+/* c_can error types:
* Bus errors (BUS_OFF, ERROR_WARNING, ERROR_PASSIVE) are supported
*/
enum c_can_bus_error_types {
@@ -253,7 +246,6 @@ static void c_can_obj_update(struct net_device *dev, int iface, u32 cmd, u32 obj
udelay(1);
}
netdev_err(dev, "Updating object timed out\n");
-
}
static inline void c_can_object_get(struct net_device *dev, int iface,
@@ -268,8 +260,7 @@ static inline void c_can_object_put(struct net_device *dev, int iface,
c_can_obj_update(dev, iface, cmd | IF_COMM_WR, obj);
}
-/*
- * Note: According to documentation clearing TXIE while MSGVAL is set
+/* Note: According to documentation clearing TXIE while MSGVAL is set
* is not allowed, but works nicely on C/DCAN. And that lowers the I/O
* load significantly.
*/
@@ -285,8 +276,7 @@ static void c_can_inval_msg_object(struct net_device *dev, int iface, int obj)
{
struct c_can_priv *priv = netdev_priv(dev);
- priv->write_reg(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
- priv->write_reg(priv, C_CAN_IFACE(ARB2_REG, iface), 0);
+ priv->write_reg32(priv, C_CAN_IFACE(ARB1_REG, iface), 0);
c_can_inval_tx_object(dev, iface, obj);
}
@@ -309,12 +299,11 @@ static void c_can_setup_tx_object(struct net_device *dev, int iface,
if (!rtr)
arb |= IF_ARB_TRANSMIT;
- /*
- * If we change the DIR bit, we need to invalidate the buffer
+ /* If we change the DIR bit, we need to invalidate the buffer
* first, i.e. clear the MSGVAL flag in the arbiter.
*/
if (rtr != (bool)test_bit(idx, &priv->tx_dir)) {
- u32 obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+ u32 obj = idx + priv->msg_obj_tx_first;
c_can_inval_msg_object(dev, iface, obj);
change_bit(idx, &priv->tx_dir);
@@ -447,18 +436,16 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
if (can_dropped_invalid_skb(dev, skb))
return NETDEV_TX_OK;
- /*
- * This is not a FIFO. C/D_CAN sends out the buffers
+ /* This is not a FIFO. C/D_CAN sends out the buffers
* prioritized. The lowest buffer number wins.
*/
idx = fls(atomic_read(&priv->tx_active));
- obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+ obj = idx + priv->msg_obj_tx_first;
/* If this is the last buffer, stop the xmit queue */
- if (idx == C_CAN_MSG_OBJ_TX_NUM - 1)
+ if (idx == priv->msg_obj_tx_num - 1)
netif_stop_queue(dev);
- /*
- * Store the message in the interface so we can call
+ /* Store the message in the interface so we can call
* can_put_echo_skb(). We must do this before we enable
* transmit as we might race against do_tx().
*/
@@ -467,7 +454,7 @@ static netdev_tx_t c_can_start_xmit(struct sk_buff *skb,
can_put_echo_skb(skb, dev, idx, 0);
/* Update the active bits */
- atomic_add((1 << idx), &priv->tx_active);
+ atomic_add(BIT(idx), &priv->tx_active);
/* Start transmission */
c_can_object_put(dev, IF_TX, obj, IF_COMM_TX);
@@ -511,7 +498,7 @@ static int c_can_set_bittiming(struct net_device *dev)
reg_brpe = brpe & BRP_EXT_BRPE_MASK;
netdev_info(dev,
- "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
+ "setting BTR=%04x BRPE=%04x\n", reg_btr, reg_brpe);
ctrl_save = priv->read_reg(priv, C_CAN_CTRL_REG);
ctrl_save &= ~CONTROL_INIT;
@@ -527,8 +514,7 @@ static int c_can_set_bittiming(struct net_device *dev)
return c_can_wait_for_ctrl_init(dev, priv, 0);
}
-/*
- * Configure C_CAN message objects for Tx and Rx purposes:
+/* Configure C_CAN message objects for Tx and Rx purposes:
* C_CAN provides a total of 32 message objects that can be configured
* either for Tx or Rx purposes. Here the first 16 message objects are used as
* a reception FIFO. The end of reception FIFO is signified by the EoB bit
@@ -538,17 +524,18 @@ static int c_can_set_bittiming(struct net_device *dev)
*/
static void c_can_configure_msg_objects(struct net_device *dev)
{
+ struct c_can_priv *priv = netdev_priv(dev);
int i;
/* first invalidate all message objects */
- for (i = C_CAN_MSG_OBJ_RX_FIRST; i <= C_CAN_NO_OF_OBJECTS; i++)
+ for (i = priv->msg_obj_rx_first; i <= priv->msg_obj_num; i++)
c_can_inval_msg_object(dev, IF_RX, i);
/* setup receive message objects */
- for (i = C_CAN_MSG_OBJ_RX_FIRST; i < C_CAN_MSG_OBJ_RX_LAST; i++)
+ for (i = priv->msg_obj_rx_first; i < priv->msg_obj_rx_last; i++)
c_can_setup_receive_object(dev, IF_RX, i, 0, 0, IF_MCONT_RCV);
- c_can_setup_receive_object(dev, IF_RX, C_CAN_MSG_OBJ_RX_LAST, 0, 0,
+ c_can_setup_receive_object(dev, IF_RX, priv->msg_obj_rx_last, 0, 0,
IF_MCONT_RCV_EOB);
}
@@ -572,8 +559,7 @@ static int c_can_software_reset(struct net_device *dev)
return 0;
}
-/*
- * Configure C_CAN chip:
+/* Configure C_CAN chip:
* - enable/disable auto-retransmission
* - set operating mode
* - configure message objects
@@ -714,12 +700,21 @@ static void c_can_do_tx(struct net_device *dev)
struct net_device_stats *stats = &dev->stats;
u32 idx, obj, pkts = 0, bytes = 0, pend, clr;
- clr = pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+ if (priv->msg_obj_tx_last > 32)
+ pend = priv->read_reg32(priv, C_CAN_INTPND3_REG);
+ else
+ pend = priv->read_reg(priv, C_CAN_INTPND2_REG);
+ clr = pend;
while ((idx = ffs(pend))) {
idx--;
- pend &= ~(1 << idx);
- obj = idx + C_CAN_MSG_OBJ_TX_FIRST;
+ pend &= ~BIT(idx);
+ obj = idx + priv->msg_obj_tx_first;
+
+ /* We use IF_RX interface instead of IF_TX because we
+ * are called from c_can_poll(), which runs inside
+ * NAPI. We are not trasmitting.
+ */
c_can_inval_tx_object(dev, IF_RX, obj);
can_get_echo_skb(dev, idx, NULL);
bytes += priv->dlc[idx];
@@ -729,7 +724,7 @@ static void c_can_do_tx(struct net_device *dev)
/* Clear the bits in the tx_active mask */
atomic_sub(clr, &priv->tx_active);
- if (clr & (1 << (C_CAN_MSG_OBJ_TX_NUM - 1)))
+ if (clr & BIT(priv->msg_obj_tx_num - 1))
netif_wake_queue(dev);
if (pkts) {
@@ -739,20 +734,18 @@ static void c_can_do_tx(struct net_device *dev)
}
}
-/*
- * If we have a gap in the pending bits, that means we either
+/* If we have a gap in the pending bits, that means we either
* raced with the hardware or failed to readout all upper
* objects in the last run due to quota limit.
*/
-static u32 c_can_adjust_pending(u32 pend)
+static u32 c_can_adjust_pending(u32 pend, u32 rx_mask)
{
u32 weight, lasts;
- if (pend == RECEIVE_OBJECT_BITS)
+ if (pend == rx_mask)
return pend;
- /*
- * If the last set bit is larger than the number of pending
+ /* If the last set bit is larger than the number of pending
* bits we have a gap.
*/
weight = hweight32(pend);
@@ -762,19 +755,19 @@ static u32 c_can_adjust_pending(u32 pend)
if (lasts == weight)
return pend;
- /*
- * Find the first set bit after the gap. We walk backwards
+ /* Find the first set bit after the gap. We walk backwards
* from the last set bit.
*/
- for (lasts--; pend & (1 << (lasts - 1)); lasts--);
+ for (lasts--; pend & BIT(lasts - 1); lasts--)
+ ;
- return pend & ~((1 << lasts) - 1);
+ return pend & ~GENMASK(lasts - 1, 0);
}
static inline void c_can_rx_object_get(struct net_device *dev,
struct c_can_priv *priv, u32 obj)
{
- c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
+ c_can_object_get(dev, IF_RX, obj, priv->comm_rcv_high);
}
static inline void c_can_rx_finalize(struct net_device *dev,
@@ -803,8 +796,7 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
continue;
}
- /*
- * This really should not happen, but this covers some
+ /* This really should not happen, but this covers some
* odd HW behaviour. Do not remove that unless you
* want to brick your machine.
*/
@@ -825,19 +817,22 @@ static int c_can_read_objects(struct net_device *dev, struct c_can_priv *priv,
static inline u32 c_can_get_pending(struct c_can_priv *priv)
{
- u32 pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
+ u32 pend;
+
+ if (priv->msg_obj_rx_last > 16)
+ pend = priv->read_reg32(priv, C_CAN_NEWDAT1_REG);
+ else
+ pend = priv->read_reg(priv, C_CAN_NEWDAT1_REG);
return pend;
}
-/*
- * theory of operation:
+/* theory of operation:
*
* c_can core saves a received CAN message into the first free message
* object it finds free (starting with the lowest). Bits NEWDAT and
* INTPND are set for this message object indicating that a new message
- * has arrived. To work-around this issue, we keep two groups of message
- * objects whose partitioning is defined by C_CAN_MSG_OBJ_RX_SPLIT.
+ * has arrived.
*
* We clear the newdat bit right away.
*
@@ -848,23 +843,16 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
struct c_can_priv *priv = netdev_priv(dev);
u32 pkts = 0, pend = 0, toread, n;
- /*
- * It is faster to read only one 16bit register. This is only possible
- * for a maximum number of 16 objects.
- */
- BUILD_BUG_ON_MSG(C_CAN_MSG_OBJ_RX_LAST > 16,
- "Implementation does not support more message objects than 16");
-
while (quota > 0) {
if (!pend) {
pend = c_can_get_pending(priv);
if (!pend)
break;
- /*
- * If the pending field has a gap, handle the
+ /* If the pending field has a gap, handle the
* bits above the gap first.
*/
- toread = c_can_adjust_pending(pend);
+ toread = c_can_adjust_pending(pend,
+ priv->msg_obj_rx_mask);
} else {
toread = pend;
}
@@ -883,7 +871,7 @@ static int c_can_do_rx_poll(struct net_device *dev, int quota)
}
static int c_can_handle_state_change(struct net_device *dev,
- enum c_can_bus_error_types error_type)
+ enum c_can_bus_error_types error_type)
{
unsigned int reg_err_counter;
unsigned int rx_err_passive;
@@ -979,8 +967,7 @@ static int c_can_handle_bus_err(struct net_device *dev,
struct can_frame *cf;
struct sk_buff *skb;
- /*
- * early exit if no lec update or no error.
+ /* early exit if no lec update or no error.
* no lec update means that no CAN bus event has been detected
* since CPU wrote 0x7 value to status reg.
*/
@@ -999,8 +986,7 @@ static int c_can_handle_bus_err(struct net_device *dev,
if (unlikely(!skb))
return 0;
- /*
- * check for 'last error code' which tells us the
+ /* check for 'last error code' which tells us the
* type of the last error to occur on the CAN bus
*/
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
@@ -1049,7 +1035,8 @@ static int c_can_poll(struct napi_struct *napi, int quota)
/* Only read the status register if a status interrupt was pending */
if (atomic_xchg(&priv->sie_pending, 0)) {
- priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG);
+ priv->last_status = priv->read_reg(priv, C_CAN_STS_REG);
+ curr = priv->last_status;
/* Ack status on C_CAN. D_CAN is self clearing */
if (priv->type != BOSCH_D_CAN)
priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED);
@@ -1147,7 +1134,7 @@ static int c_can_open(struct net_device *dev)
/* register interrupt handler */
err = request_irq(dev->irq, &c_can_isr, IRQF_SHARED, dev->name,
- dev);
+ dev);
if (err < 0) {
netdev_err(dev, "failed to request interrupt\n");
goto exit_irq_fail;
@@ -1195,17 +1182,31 @@ static int c_can_close(struct net_device *dev)
return 0;
}
-struct net_device *alloc_c_can_dev(void)
+struct net_device *alloc_c_can_dev(int msg_obj_num)
{
struct net_device *dev;
struct c_can_priv *priv;
+ int msg_obj_tx_num = msg_obj_num / 2;
- dev = alloc_candev(sizeof(struct c_can_priv), C_CAN_MSG_OBJ_TX_NUM);
+ dev = alloc_candev(struct_size(priv, dlc, msg_obj_tx_num),
+ msg_obj_tx_num);
if (!dev)
return NULL;
priv = netdev_priv(dev);
- netif_napi_add(dev, &priv->napi, c_can_poll, C_CAN_NAPI_WEIGHT);
+ priv->msg_obj_num = msg_obj_num;
+ priv->msg_obj_rx_num = msg_obj_num - msg_obj_tx_num;
+ priv->msg_obj_rx_first = 1;
+ priv->msg_obj_rx_last =
+ priv->msg_obj_rx_first + priv->msg_obj_rx_num - 1;
+ priv->msg_obj_rx_mask = GENMASK(priv->msg_obj_rx_num - 1, 0);
+
+ priv->msg_obj_tx_num = msg_obj_tx_num;
+ priv->msg_obj_tx_first = priv->msg_obj_rx_last + 1;
+ priv->msg_obj_tx_last =
+ priv->msg_obj_tx_first + priv->msg_obj_tx_num - 1;
+
+ netif_napi_add(dev, &priv->napi, c_can_poll, priv->msg_obj_rx_num);
priv->dev = dev;
priv->can.bittiming_const = &c_can_bittiming_const;
@@ -1239,7 +1240,7 @@ int c_can_power_down(struct net_device *dev)
/* Wait for the PDA bit to get set */
time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
while (!(priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
- time_after(time_out, jiffies))
+ time_after(time_out, jiffies))
cpu_relax();
if (time_after(jiffies, time_out))
@@ -1280,7 +1281,7 @@ int c_can_power_up(struct net_device *dev)
/* Wait for the PDA bit to get clear */
time_out = jiffies + msecs_to_jiffies(INIT_WAIT_MS);
while ((priv->read_reg(priv, C_CAN_STS_REG) & STATUS_PDA) &&
- time_after(time_out, jiffies))
+ time_after(time_out, jiffies))
cpu_relax();
if (time_after(jiffies, time_out)) {
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-22 07:18:27 +0000