diff options
Diffstat (limited to 'drivers/mtd')
-rw-r--r-- | drivers/mtd/devices/m25p80.c | 18 | ||||
-rw-r--r-- | drivers/mtd/devices/mtd_dataflash.c | 1 | ||||
-rw-r--r-- | drivers/mtd/maps/nettel.c | 13 | ||||
-rw-r--r-- | drivers/mtd/maps/physmap_of.c | 6 | ||||
-rw-r--r-- | drivers/mtd/mtd_blkdevs.c | 8 | ||||
-rw-r--r-- | drivers/mtd/nand/Kconfig | 13 | ||||
-rw-r--r-- | drivers/mtd/nand/brcmnand/brcmnand.h | 4 | ||||
-rw-r--r-- | drivers/mtd/nand/davinci_nand.c | 42 | ||||
-rw-r--r-- | drivers/mtd/nand/denali_pci.c | 43 | ||||
-rw-r--r-- | drivers/mtd/nand/nand_ids.c | 4 | ||||
-rw-r--r-- | drivers/mtd/nand/nandsim.c | 28 | ||||
-rw-r--r-- | drivers/mtd/nand/omap_elm.c | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/pxa3xx_nand.c | 61 | ||||
-rw-r--r-- | drivers/mtd/nand/r852.c | 2 | ||||
-rw-r--r-- | drivers/mtd/nand/sunxi_nand.c | 88 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/Kconfig | 14 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/Makefile | 1 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/fsl-quadspi.c | 265 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/nxp-spifi.c | 482 | ||||
-rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 69 | ||||
-rw-r--r-- | drivers/mtd/tests/oobtest.c | 18 |
21 files changed, 950 insertions, 232 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index d313f948b96c..9cd3631170ef 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -223,8 +223,6 @@ static int m25p_probe(struct spi_device *spi) */ if (data && data->type) flash_name = data->type; - else if (!strcmp(spi->modalias, "spi-nor")) - flash_name = NULL; /* auto-detect */ else flash_name = spi->modalias; @@ -289,19 +287,25 @@ static const struct spi_device_id m25p_ids[] = { {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, - /* - * Generic support for SPI NOR that can be identified by the JEDEC READ - * ID opcode (0x9F). Use this, if possible. - */ - {"spi-nor"}, { }, }; MODULE_DEVICE_TABLE(spi, m25p_ids); +static const struct of_device_id m25p_of_table[] = { + /* + * Generic compatibility for SPI NOR that can be identified by the + * JEDEC READ ID opcode (0x9F). Use this, if possible. + */ + { .compatible = "jedec,spi-nor" }, + {} +}; +MODULE_DEVICE_TABLE(of, m25p_of_table); + static struct spi_driver m25p80_driver = { .driver = { .name = "m25p80", .owner = THIS_MODULE, + .of_match_table = m25p_of_table, }, .id_table = m25p_ids, .probe = m25p_probe, diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index 0099aba72a8b..df6f61137376 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -102,6 +102,7 @@ static const struct of_device_id dataflash_dt_ids[] = { { .compatible = "atmel,dataflash", }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, dataflash_dt_ids); #endif /* ......................................................................... */ diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c index eadcfffc4f9c..a577ef8553d0 100644 --- a/drivers/mtd/maps/nettel.c +++ b/drivers/mtd/maps/nettel.c @@ -385,20 +385,28 @@ static int __init nettel_init(void) } rc = mtd_device_register(intel_mtd, nettel_intel_partitions, num_intel_partitions); + if (rc) + goto out_map_destroy; #endif if (amd_mtd) { rc = mtd_device_register(amd_mtd, nettel_amd_partitions, num_amd_partitions); + if (rc) + goto out_mtd_unreg; } #ifdef CONFIG_MTD_CFI_INTELEXT register_reboot_notifier(&nettel_notifier_block); #endif - return(rc); + return rc; +out_mtd_unreg: #ifdef CONFIG_MTD_CFI_INTELEXT + mtd_device_unregister(intel_mtd); +out_map_destroy: + map_destroy(intel_mtd); out_unmap1: iounmap(nettel_intel_map.virt); #endif @@ -407,8 +415,7 @@ out_unmap2: iounmap(nettel_mmcrp); iounmap(nettel_amd_map.virt); - return(rc); - + return rc; } /****************************************************************************/ diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 774b32fd29e6..3e614e9119d5 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -130,6 +130,8 @@ static const char * const *of_get_probes(struct device_node *dp) count++; res = kzalloc((count + 1)*sizeof(*res), GFP_KERNEL); + if (!res) + return NULL; count = 0; while (cplen > 0) { res[count] = cp; @@ -311,6 +313,10 @@ static int of_flash_probe(struct platform_device *dev) ppdata.of_node = dp; part_probe_types = of_get_probes(dp); + if (!part_probe_types) { + err = -ENOMEM; + goto err_out; + } mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata, NULL, 0); of_free_probes(part_probe_types); diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 1b96cf771d2b..44dc965a2f7c 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -97,14 +97,13 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, if (req->cmd_flags & REQ_DISCARD) return tr->discard(dev, block, nsect); - switch(rq_data_dir(req)) { - case READ: + if (rq_data_dir(req) == READ) { for (; nsect > 0; nsect--, block++, buf += tr->blksize) if (tr->readsect(dev, block, buf)) return -EIO; rq_flush_dcache_pages(req); return 0; - case WRITE: + } else { if (!tr->writesect) return -EIO; @@ -113,9 +112,6 @@ static int do_blktrans_request(struct mtd_blktrans_ops *tr, if (tr->writesect(dev, block, buf)) return -EIO; return 0; - default: - printk(KERN_NOTICE "Unknown request %u\n", rq_data_dir(req)); - return -EIO; } } diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 5b2806a7e5f7..3324281d1f53 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -42,23 +42,20 @@ config MTD_SM_COMMON default n config MTD_NAND_DENALI - tristate "Support Denali NAND controller" - depends on HAS_DMA - help - Enable support for the Denali NAND controller. This should be - combined with either the PCI or platform drivers to provide device - registration. + tristate config MTD_NAND_DENALI_PCI tristate "Support Denali NAND controller on Intel Moorestown" - depends on PCI && MTD_NAND_DENALI + select MTD_NAND_DENALI + depends on HAS_DMA && PCI help Enable the driver for NAND flash on Intel Moorestown, using the Denali NAND controller core. config MTD_NAND_DENALI_DT tristate "Support Denali NAND controller as a DT device" - depends on HAVE_CLK && MTD_NAND_DENALI + select MTD_NAND_DENALI + depends on HAS_DMA && HAVE_CLK help Enable the driver for NAND flash on platforms using a Denali NAND controller as a DT device. diff --git a/drivers/mtd/nand/brcmnand/brcmnand.h b/drivers/mtd/nand/brcmnand/brcmnand.h index a20c73630b7b..169f99e38a26 100644 --- a/drivers/mtd/nand/brcmnand/brcmnand.h +++ b/drivers/mtd/nand/brcmnand/brcmnand.h @@ -50,7 +50,7 @@ static inline u32 brcmnand_readl(void __iomem *addr) * Other architectures (e.g., ARM) either do not support big endian, or * else leave I/O in little endian mode. */ - if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) return __raw_readl(addr); else return readl_relaxed(addr); @@ -59,7 +59,7 @@ static inline u32 brcmnand_readl(void __iomem *addr) static inline void brcmnand_writel(u32 val, void __iomem *addr) { /* See brcmnand_readl() comments */ - if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN)) + if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) __raw_writel(val, addr); else writel_relaxed(val, addr); diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index feb6d18de78d..b90801302df4 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -520,6 +520,32 @@ static struct nand_ecclayout hwecc4_2048 = { }, }; +/* + * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash, + * storing ten ECC bytes plus the manufacturer's bad block marker byte, + * and not overlapping the default BBT markers. + */ +static struct nand_ecclayout hwecc4_4096 = { + .eccbytes = 80, + .eccpos = { + /* at the end of spare sector */ + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, + 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, + 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, + 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, + 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + }, + .oobfree = { + /* 2 bytes at offset 0 hold manufacturer badblock markers */ + {.offset = 2, .length = 46, }, + /* 5 bytes at offset 8 hold BBT markers */ + /* 8 bytes at offset 16 hold JFFS2 clean markers */ + }, +}; + #if defined(CONFIG_OF) static const struct of_device_id davinci_nand_of_match[] = { {.compatible = "ti,davinci-nand", }, @@ -796,18 +822,12 @@ static int nand_davinci_probe(struct platform_device *pdev) info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; goto syndrome_done; } + if (chunks == 8) { + info->ecclayout = hwecc4_4096; + info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST; + goto syndrome_done; + } - /* 4KiB page chips are not yet supported. The eccpos from - * nand_ecclayout cannot hold 80 bytes and change to eccpos[] - * breaks userspace ioctl interface with mtd-utils. Once we - * resolve this issue, NAND_ECC_HW_OOB_FIRST mode can be used - * for the 4KiB page chips. - * - * TODO: Note that nand_ecclayout has now been expanded and can - * hold plenty of OOB entries. - */ - dev_warn(&pdev->dev, "no 4-bit ECC support yet " - "for 4KiB-page NAND\n"); ret = -EIO; goto err; diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c index 6e2f387b823f..de31514df282 100644 --- a/drivers/mtd/nand/denali_pci.c +++ b/drivers/mtd/nand/denali_pci.c @@ -30,19 +30,19 @@ MODULE_DEVICE_TABLE(pci, denali_pci_ids); static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { - int ret = -ENODEV; + int ret; resource_size_t csr_base, mem_base; unsigned long csr_len, mem_len; struct denali_nand_info *denali; - denali = kzalloc(sizeof(*denali), GFP_KERNEL); + denali = devm_kzalloc(&dev->dev, sizeof(*denali), GFP_KERNEL); if (!denali) return -ENOMEM; - ret = pci_enable_device(dev); + ret = pcim_enable_device(dev); if (ret) { - pr_err("Spectra: pci_enable_device failed.\n"); - goto failed_alloc_memery; + dev_err(&dev->dev, "Spectra: pci_enable_device failed.\n"); + return ret; } if (id->driver_data == INTEL_CE4100) { @@ -69,20 +69,19 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) ret = pci_request_regions(dev, DENALI_NAND_NAME); if (ret) { - pr_err("Spectra: Unable to request memory regions\n"); - goto failed_enable_dev; + dev_err(&dev->dev, "Spectra: Unable to request memory regions\n"); + return ret; } denali->flash_reg = ioremap_nocache(csr_base, csr_len); if (!denali->flash_reg) { - pr_err("Spectra: Unable to remap memory region\n"); - ret = -ENOMEM; - goto failed_req_regions; + dev_err(&dev->dev, "Spectra: Unable to remap memory region\n"); + return -ENOMEM; } denali->flash_mem = ioremap_nocache(mem_base, mem_len); if (!denali->flash_mem) { - pr_err("Spectra: ioremap_nocache failed!"); + dev_err(&dev->dev, "Spectra: ioremap_nocache failed!"); ret = -ENOMEM; goto failed_remap_reg; } @@ -99,13 +98,6 @@ failed_remap_mem: iounmap(denali->flash_mem); failed_remap_reg: iounmap(denali->flash_reg); -failed_req_regions: - pci_release_regions(dev); -failed_enable_dev: - pci_disable_device(dev); -failed_alloc_memery: - kfree(denali); - return ret; } @@ -117,9 +109,6 @@ static void denali_pci_remove(struct pci_dev *dev) denali_remove(denali); iounmap(denali->flash_reg); iounmap(denali->flash_mem); - pci_release_regions(dev); - pci_disable_device(dev); - kfree(denali); } static struct pci_driver denali_pci_driver = { @@ -129,14 +118,4 @@ static struct pci_driver denali_pci_driver = { .remove = denali_pci_remove, }; -static int denali_init_pci(void) -{ - return pci_register_driver(&denali_pci_driver); -} -module_init(denali_init_pci); - -static void denali_exit_pci(void) -{ - pci_unregister_driver(&denali_pci_driver); -} -module_exit(denali_exit_pci); +module_pci_driver(denali_pci_driver); diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 7124400d903b..a8804a3da076 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -29,6 +29,10 @@ struct nand_flash_dev nand_flash_ids[] = { * listed by full ID. We list them first so that we can easily identify * the most specific match. */ + {"TC58NVG0S3E 1G 3.3V 8-bit", + { .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} }, + SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), + 2 }, {"TC58NVG2S0F 4G 3.3V 8-bit", { .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} }, SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) }, diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 52c0c1a3899c..95d0cc49cfc2 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -649,7 +649,8 @@ static void free_device(struct nandsim *ns) kmem_cache_free(ns->nand_pages_slab, ns->pages[i].byte); } - kmem_cache_destroy(ns->nand_pages_slab); + if (ns->nand_pages_slab) + kmem_cache_destroy(ns->nand_pages_slab); vfree(ns->pages); } } @@ -729,8 +730,7 @@ static int init_nandsim(struct mtd_info *mtd) /* Fill the partition_info structure */ if (parts_num > ARRAY_SIZE(ns->partitions)) { NS_ERR("too many partitions.\n"); - ret = -EINVAL; - goto error; + return -EINVAL; } remains = ns->geom.totsz; next_offset = 0; @@ -739,14 +739,12 @@ static int init_nandsim(struct mtd_info *mtd) if (!part_sz || part_sz > remains) { NS_ERR("bad partition size.\n"); - ret = -EINVAL; - goto error; + return -EINVAL; } ns->partitions[i].name = get_partition_name(i); if (!ns->partitions[i].name) { NS_ERR("unable to allocate memory.\n"); - ret = -ENOMEM; - goto error; + return -ENOMEM; } ns->partitions[i].offset = next_offset; ns->partitions[i].size = part_sz; @@ -757,14 +755,12 @@ static int init_nandsim(struct mtd_info *mtd) if (remains) { if (parts_num + 1 > ARRAY_SIZE(ns->partitions)) { NS_ERR("too many partitions.\n"); - ret = -EINVAL; - goto error; + return -EINVAL; } ns->partitions[i].name = get_partition_name(i); if (!ns->partitions[i].name) { NS_ERR("unable to allocate memory.\n"); - ret = -ENOMEM; - goto error; + return -ENOMEM; } ns->partitions[i].offset = next_offset; ns->partitions[i].size = remains; @@ -792,24 +788,18 @@ static int init_nandsim(struct mtd_info *mtd) printk("options: %#x\n", ns->options); if ((ret = alloc_device(ns)) != 0) - goto error; + return ret; /* Allocate / initialize the internal buffer */ ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL); if (!ns->buf.byte) { NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n", ns->geom.pgszoob); - ret = -ENOMEM; - goto error; + return -ENOMEM; } memset(ns->buf.byte, 0xFF, ns->geom.pgszoob); return 0; - -error: - free_device(ns); - - return ret; } /* diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c index 376bfe19104f..235ec7992b4c 100644 --- a/drivers/mtd/nand/omap_elm.c +++ b/drivers/mtd/nand/omap_elm.c @@ -574,5 +574,5 @@ module_platform_driver(elm_driver); MODULE_DESCRIPTION("ELM driver for BCH error correction"); MODULE_AUTHOR("Texas Instruments"); -MODULE_ALIAS("platform: elm"); +MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index 1259cc558ce9..740983a34626 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -45,10 +45,13 @@ /* * Define a buffer size for the initial command that detects the flash device: - * STATUS, READID and PARAM. The largest of these is the PARAM command, - * needing 256 bytes. + * STATUS, READID and PARAM. + * ONFI param page is 256 bytes, and there are three redundant copies + * to be read. JEDEC param page is 512 bytes, and there are also three + * redundant copies to be read. + * Hence this buffer should be at least 512 x 3. Let's pick 2048. */ -#define INIT_BUFFER_SIZE 256 +#define INIT_BUFFER_SIZE 2048 /* registers and bit definitions */ #define NDCR (0x00) /* Control register */ @@ -126,6 +129,13 @@ #define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */ #define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */ +/* + * This should be large enough to read 'ONFI' and 'JEDEC'. + * Let's use 7 bytes, which is the maximum ID count supported + * by the controller (see NDCR_RD_ID_CNT_MASK). + */ +#define READ_ID_BYTES 7 + /* macros for registers read/write */ #define nand_writel(info, off, val) \ writel_relaxed((val), (info)->mmio_base + (off)) @@ -173,8 +183,6 @@ struct pxa3xx_nand_host { /* calculated from pxa3xx_nand_flash data */ unsigned int col_addr_cycles; unsigned int row_addr_cycles; - size_t read_id_bytes; - }; struct pxa3xx_nand_info { @@ -439,8 +447,8 @@ static void pxa3xx_nand_start(struct pxa3xx_nand_info *info) ndcr |= NDCR_ND_RUN; /* clear status bits and run */ - nand_writel(info, NDCR, 0); nand_writel(info, NDSR, NDSR_MASK); + nand_writel(info, NDCR, 0); nand_writel(info, NDCR, ndcr); } @@ -675,8 +683,14 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) is_ready = 1; } + /* + * Clear all status bit before issuing the next command, which + * can and will alter the status bits and will deserve a new + * interrupt on its own. This lets the controller exit the IRQ + */ + nand_writel(info, NDSR, status); + if (status & NDSR_WRCMDREQ) { - nand_writel(info, NDSR, NDSR_WRCMDREQ); status &= ~NDSR_WRCMDREQ; info->state = STATE_CMD_HANDLE; @@ -697,8 +711,6 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid) nand_writel(info, NDCB0, info->ndcb3); } - /* clear NDSR to let the controller exit the IRQ */ - nand_writel(info, NDSR, status); if (is_completed) complete(&info->cmd_complete); if (is_ready) @@ -899,18 +911,18 @@ static int prepare_set_command(struct pxa3xx_nand_info *info, int command, break; case NAND_CMD_PARAM: - info->buf_count = 256; + info->buf_count = INIT_BUFFER_SIZE; info->ndcb0 |= NDCB0_CMD_TYPE(0) | NDCB0_ADDR_CYC(1) | NDCB0_LEN_OVRD | command; info->ndcb1 = (column & 0xFF); - info->ndcb3 = 256; - info->data_size = 256; + info->ndcb3 = INIT_BUFFER_SIZE; + info->data_size = INIT_BUFFER_SIZE; break; case NAND_CMD_READID: - info->buf_count = host->read_id_bytes; + info->buf_count = READ_ID_BYTES; info->ndcb0 |= NDCB0_CMD_TYPE(3) | NDCB0_ADDR_CYC(1) | command; @@ -1247,9 +1259,6 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, return -EINVAL; } - /* calculate flash information */ - host->read_id_bytes = (f->page_size == 2048) ? 4 : 2; - /* calculate addressing information */ host->col_addr_cycles = (f->page_size == 2048) ? 2 : 1; @@ -1265,7 +1274,7 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, ndcr |= (f->flash_width == 16) ? NDCR_DWIDTH_M : 0; ndcr |= (f->dfc_width == 16) ? NDCR_DWIDTH_C : 0; - ndcr |= NDCR_RD_ID_CNT(host->read_id_bytes); + ndcr |= NDCR_RD_ID_CNT(READ_ID_BYTES); ndcr |= NDCR_SPARE_EN; /* enable spare by default */ info->reg_ndcr = ndcr; @@ -1276,23 +1285,10 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info, static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info) { - /* - * We set 0 by hard coding here, for we don't support keep_config - * when there is more than one chip attached to the controller - */ - struct pxa3xx_nand_host *host = info->host[0]; uint32_t ndcr = nand_readl(info, NDCR); - if (ndcr & NDCR_PAGE_SZ) { - /* Controller's FIFO size */ - info->chunk_size = 2048; - host->read_id_bytes = 4; - } else { - info->chunk_size = 512; - host->read_id_bytes = 2; - } - /* Set an initial chunk size */ + info->chunk_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512; info->reg_ndcr = ndcr & ~NDCR_INT_MASK; info->ndtr0cs0 = nand_readl(info, NDTR0CS0); info->ndtr1cs0 = nand_readl(info, NDTR1CS0); @@ -1473,6 +1469,9 @@ static int pxa3xx_nand_scan(struct mtd_info *mtd) if (pdata->keep_config && !pxa3xx_nand_detect_config(info)) goto KEEP_CONFIG; + /* Set a default chunk size */ + info->chunk_size = 512; + ret = pxa3xx_nand_sensing(info); if (ret) { dev_info(&info->pdev->dev, "There is no chip on cs %d!\n", diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 77e96d2df96c..cc6bac537f5a 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -466,7 +466,7 @@ static int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat, static int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc, uint8_t *calc_ecc) { - uint16_t ecc_reg; + uint32_t ecc_reg; uint8_t ecc_status, err_byte; int i, error = 0; diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 6f93b2990d25..f97a58d6aae1 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -99,6 +99,15 @@ NFC_CMD_INT_ENABLE | \ NFC_DMA_INT_ENABLE) +/* define bit use in NFC_TIMING_CTL */ +#define NFC_TIMING_CTL_EDO BIT(8) + +/* define NFC_TIMING_CFG register layout */ +#define NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD) \ + (((tWB) & 0x3) | (((tADL) & 0x3) << 2) | \ + (((tWHR) & 0x3) << 4) | (((tRHW) & 0x3) << 6) | \ + (((tCAD) & 0x7) << 8)) + /* define bit use in NFC_CMD */ #define NFC_CMD_LOW_BYTE GENMASK(7, 0) #define NFC_CMD_HIGH_BYTE GENMASK(15, 8) @@ -208,6 +217,7 @@ struct sunxi_nand_hw_ecc { * @nand: base NAND chip structure * @mtd: base MTD structure * @clk_rate: clk_rate required for this NAND chip + * @timing_cfg TIMING_CFG register value for this NAND chip * @selected: current active CS * @nsels: number of CS lines required by the NAND chip * @sels: array of CS lines descriptions @@ -217,6 +227,8 @@ struct sunxi_nand_chip { struct nand_chip nand; struct mtd_info mtd; unsigned long clk_rate; + u32 timing_cfg; + u32 timing_ctl; int selected; int nsels; struct sunxi_nand_chip_sel sels[0]; @@ -403,6 +415,8 @@ static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip) } } + writel(sunxi_nand->timing_ctl, nfc->regs + NFC_REG_TIMING_CTL); + writel(sunxi_nand->timing_cfg, nfc->regs + NFC_REG_TIMING_CFG); writel(ctl, nfc->regs + NFC_REG_CTL); sunxi_nand->selected = chip; @@ -807,10 +821,33 @@ static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd, return 0; } +static const s32 tWB_lut[] = {6, 12, 16, 20}; +static const s32 tRHW_lut[] = {4, 8, 12, 20}; + +static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration, + u32 clk_period) +{ + u32 clk_cycles = DIV_ROUND_UP(duration, clk_period); + int i; + + for (i = 0; i < lut_size; i++) { + if (clk_cycles <= lut[i]) + return i; + } + + /* Doesn't fit */ + return -EINVAL; +} + +#define sunxi_nand_lookup_timing(l, p, c) \ + _sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c) + static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, const struct nand_sdr_timings *timings) { + struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller); u32 min_clk_period = 0; + s32 tWB, tADL, tWHR, tRHW, tCAD; /* T1 <=> tCLS */ if (timings->tCLS_min > min_clk_period) @@ -872,6 +909,48 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, if (timings->tWC_min > (min_clk_period * 2)) min_clk_period = DIV_ROUND_UP(timings->tWC_min, 2); + /* T16 - T19 + tCAD */ + tWB = sunxi_nand_lookup_timing(tWB_lut, timings->tWB_max, + min_clk_period); + if (tWB < 0) { + dev_err(nfc->dev, "unsupported tWB\n"); + return tWB; + } + + tADL = DIV_ROUND_UP(timings->tADL_min, min_clk_period) >> 3; + if (tADL > 3) { + dev_err(nfc->dev, "unsupported tADL\n"); + return -EINVAL; + } + + tWHR = DIV_ROUND_UP(timings->tWHR_min, min_clk_period) >> 3; + if (tWHR > 3) { + dev_err(nfc->dev, "unsupported tWHR\n"); + return -EINVAL; + } + + tRHW = sunxi_nand_lookup_timing(tRHW_lut, timings->tRHW_min, + min_clk_period); + if (tRHW < 0) { + dev_err(nfc->dev, "unsupported tRHW\n"); + return tRHW; + } + + /* + * TODO: according to ONFI specs this value only applies for DDR NAND, + * but Allwinner seems to set this to 0x7. Mimic them for now. + */ + tCAD = 0x7; + + /* TODO: A83 has some more bits for CDQSS, CS, CLHZ, CCS, WC */ + chip->timing_cfg = NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD); + + /* + * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data + * output cycle timings shall be used if the host drives tRC less than + * 30 ns. + */ + chip->timing_ctl = (timings->tRC_min < 30000) ? NFC_TIMING_CTL_EDO : 0; /* Convert min_clk_period from picoseconds to nanoseconds */ min_clk_period = DIV_ROUND_UP(min_clk_period, 1000); @@ -884,8 +963,6 @@ static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip, */ chip->clk_rate = (2 * NSEC_PER_SEC) / min_clk_period; - /* TODO: configure T16-T19 */ - return 0; } @@ -1376,13 +1453,6 @@ static int sunxi_nfc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, nfc); - /* - * TODO: replace these magic values with proper flags as soon as we - * know what they are encoding. - */ - writel(0x100, nfc->regs + NFC_REG_TIMING_CTL); - writel(0x7ff, nfc->regs + NFC_REG_TIMING_CFG); - ret = sunxi_nand_chips_init(dev, nfc); if (ret) { dev_err(dev, "failed to init nand chips\n"); diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 64a4f0edabc7..89bf4c1faa2b 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -26,6 +26,18 @@ config SPI_FSL_QUADSPI depends on ARCH_MXC help This enables support for the Quad SPI controller in master mode. - We only connect the NOR to this controller now. + This controller does not support generic SPI. It only supports + SPI NOR. + +config SPI_NXP_SPIFI + tristate "NXP SPI Flash Interface (SPIFI)" + depends on OF && (ARCH_LPC18XX || COMPILE_TEST) + depends on HAS_IOMEM + help + Enable support for the NXP LPC SPI Flash Interface controller. + + SPIFI is a specialized controller for connecting serial SPI + Flash. Enable this option if you have a device with a SPIFI + controller and want to access the Flash as a mtd device. endif # MTD_SPI_NOR diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile index 6a7ce1462247..e53333ef8582 100644 --- a/drivers/mtd/spi-nor/Makefile +++ b/drivers/mtd/spi-nor/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o +obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 52a872fa1b6e..d32b7e04ccca 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -26,6 +26,20 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/spi-nor.h> +#include <linux/mutex.h> +#include <linux/pm_qos.h> + +/* Controller needs driver to swap endian */ +#define QUADSPI_QUIRK_SWAP_ENDIAN (1 << 0) +/* Controller needs 4x internal clock */ +#define QUADSPI_QUIRK_4X_INT_CLK (1 << 1) +/* + * TKT253890, Controller needs driver to fill txfifo till 16 byte to + * trigger data transfer even though extern data will not transferred. + */ +#define QUADSPI_QUIRK_TKT253890 (1 << 2) +/* Controller cannot wake up from wait mode, TKT245618 */ +#define QUADSPI_QUIRK_TKT245618 (1 << 3) /* The registers */ #define QUADSPI_MCR 0x00 @@ -191,9 +205,13 @@ #define SEQID_EN4B 10 #define SEQID_BRWR 11 +#define QUADSPI_MIN_IOMAP SZ_4M + enum fsl_qspi_devtype { FSL_QUADSPI_VYBRID, FSL_QUADSPI_IMX6SX, + FSL_QUADSPI_IMX7D, + FSL_QUADSPI_IMX6UL, }; struct fsl_qspi_devtype_data { @@ -201,20 +219,42 @@ struct fsl_qspi_devtype_data { int rxfifo; int txfifo; int ahb_buf_size; + int driver_data; }; static struct fsl_qspi_devtype_data vybrid_data = { .devtype = FSL_QUADSPI_VYBRID, .rxfifo = 128, .txfifo = 64, - .ahb_buf_size = 1024 + .ahb_buf_size = 1024, + .driver_data = QUADSPI_QUIRK_SWAP_ENDIAN, }; static struct fsl_qspi_devtype_data imx6sx_data = { .devtype = FSL_QUADSPI_IMX6SX, .rxfifo = 128, .txfifo = 512, - .ahb_buf_size = 1024 + .ahb_buf_size = 1024, + .driver_data = QUADSPI_QUIRK_4X_INT_CLK + | QUADSPI_QUIRK_TKT245618, +}; + +static struct fsl_qspi_devtype_data imx7d_data = { + .devtype = FSL_QUADSPI_IMX7D, + .rxfifo = 512, + .txfifo = 512, + .ahb_buf_size = 1024, + .driver_data = QUADSPI_QUIRK_TKT253890 + | QUADSPI_QUIRK_4X_INT_CLK, +}; + +static struct fsl_qspi_devtype_data imx6ul_data = { + .devtype = FSL_QUADSPI_IMX6UL, + .rxfifo = 128, + .txfifo = 512, + .ahb_buf_size = 1024, + .driver_data = QUADSPI_QUIRK_TKT253890 + | QUADSPI_QUIRK_4X_INT_CLK, }; #define FSL_QSPI_MAX_CHIP 4 @@ -222,8 +262,10 @@ struct fsl_qspi { struct mtd_info mtd[FSL_QSPI_MAX_CHIP]; struct spi_nor nor[FSL_QSPI_MAX_CHIP]; void __iomem *iobase; - void __iomem *ahb_base; /* Used when read from AHB bus */ + void __iomem *ahb_addr; u32 memmap_phy; + u32 memmap_offs; + u32 memmap_len; struct clk *clk, *clk_en; struct device *dev; struct completion c; @@ -233,16 +275,28 @@ struct fsl_qspi { u32 clk_rate; unsigned int chip_base_addr; /* We may support two chips. */ bool has_second_chip; + struct mutex lock; + struct pm_qos_request pm_qos_req; }; -static inline int is_vybrid_qspi(struct fsl_qspi *q) +static inline int needs_swap_endian(struct fsl_qspi *q) +{ + return q->devtype_data->driver_data & QUADSPI_QUIRK_SWAP_ENDIAN; +} + +static inline int needs_4x_clock(struct fsl_qspi *q) +{ + return q->devtype_data->driver_data & QUADSPI_QUIRK_4X_INT_CLK; +} + +static inline int needs_fill_txfifo(struct fsl_qspi *q) { - return q->devtype_data->devtype == FSL_QUADSPI_VYBRID; + return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT253890; } -static inline int is_imx6sx_qspi(struct fsl_qspi *q) +static inline int needs_wakeup_wait_mode(struct fsl_qspi *q) { - return q->devtype_data->devtype == FSL_QUADSPI_IMX6SX; + return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618; } /* @@ -251,7 +305,7 @@ static inline int is_imx6sx_qspi(struct fsl_qspi *q) */ static inline u32 fsl_qspi_endian_xchg(struct fsl_qspi *q, u32 a) { - return is_vybrid_qspi(q) ? __swab32(a) : a; + return needs_swap_endian(q) ? __swab32(a) : a; } static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q) @@ -343,14 +397,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) /* Erase a sector */ lut_base = SEQID_SE * 4; - if (q->nor_size <= SZ_16M) { - cmd = SPINOR_OP_SE; - addrlen = ADDR24BIT; - } else { - /* use the 4-byte address */ - cmd = SPINOR_OP_SE; - addrlen = ADDR32BIT; - } + cmd = q->nor[0].erase_opcode; + addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT; writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); @@ -419,6 +467,8 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) case SPINOR_OP_BRWR: return SEQID_BRWR; default: + if (cmd == q->nor[0].erase_opcode) + return SEQID_SE; dev_err(q->dev, "Unsupported cmd 0x%.2x\n", cmd); break; } @@ -537,7 +587,7 @@ static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, /* clear the TX FIFO. */ tmp = readl(q->iobase + QUADSPI_MCR); - writel(tmp | QUADSPI_MCR_CLR_RXF_MASK, q->iobase + QUADSPI_MCR); + writel(tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR); /* fill the TX data to the FIFO */ for (j = 0, i = ((count + 3) / 4); j < i; j++) { @@ -546,6 +596,11 @@ static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, txbuf++; } + /* fill the TXFIFO upto 16 bytes for i.MX7d */ + if (needs_fill_txfifo(q)) + for (; i < 4; i++) + writel(tmp, q->iobase + QUADSPI_TBDR); + /* Trigger it */ ret = fsl_qspi_runcmd(q, opcode, to, count); @@ -606,6 +661,38 @@ static void fsl_qspi_init_abh_read(struct fsl_qspi *q) q->iobase + QUADSPI_BFGENCR); } +/* This function was used to prepare and enable QSPI clock */ +static int fsl_qspi_clk_prep_enable(struct fsl_qspi *q) +{ + int ret; + + ret = clk_prepare_enable(q->clk_en); + if (ret) + return ret; + + ret = clk_prepare_enable(q->clk); + if (ret) { + clk_disable_unprepare(q->clk_en); + return ret; + } + + if (needs_wakeup_wait_mode(q)) + pm_qos_add_request(&q->pm_qos_req, PM_QOS_CPU_DMA_LATENCY, 0); + + return 0; +} + +/* This function was used to disable and unprepare QSPI clock */ +static void fsl_qspi_clk_disable_unprep(struct fsl_qspi *q) +{ + if (needs_wakeup_wait_mode(q)) + pm_qos_remove_request(&q->pm_qos_req); + + clk_disable_unprepare(q->clk); + clk_disable_unprepare(q->clk_en); + +} + /* We use this function to do some basic init for spi_nor_scan(). */ static int fsl_qspi_nor_setup(struct fsl_qspi *q) { @@ -613,11 +700,23 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q) u32 reg; int ret; - /* the default frequency, we will change it in the future.*/ + /* disable and unprepare clock to avoid glitch pass to controller */ + fsl_qspi_clk_disable_unprep(q); + + /* the default frequency, we will change it in the future. */ ret = clk_set_rate(q->clk, 66000000); if (ret) return ret; + ret = fsl_qspi_clk_prep_enable(q); + if (ret) + return ret; + + /* Reset the module */ + writel(QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK, + base + QUADSPI_MCR); + udelay(1); + /* Init the LUT table. */ fsl_qspi_init_lut(q); @@ -635,6 +734,9 @@ static int fsl_qspi_nor_setup(struct fsl_qspi *q) writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK, base + QUADSPI_MCR); + /* clear all interrupt status */ + writel(0xffffffff, q->iobase + QUADSPI_FR); + /* enable the interrupt */ writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); @@ -646,13 +748,20 @@ static int fsl_qspi_nor_setup_last(struct fsl_qspi *q) unsigned long rate = q->clk_rate; int ret; - if (is_imx6sx_qspi(q)) + if (needs_4x_clock(q)) rate *= 4; + /* disable and unprepare clock to avoid glitch pass to controller */ + fsl_qspi_clk_disable_unprep(q); + ret = clk_set_rate(q->clk, rate); if (ret) return ret; + ret = fsl_qspi_clk_prep_enable(q); + if (ret) + return ret; + /* Init the LUT table again. */ fsl_qspi_init_lut(q); @@ -665,6 +774,8 @@ static int fsl_qspi_nor_setup_last(struct fsl_qspi *q) static const struct of_device_id fsl_qspi_dt_ids[] = { { .compatible = "fsl,vf610-qspi", .data = (void *)&vybrid_data, }, { .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, }, + { .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, }, + { .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); @@ -730,11 +841,42 @@ static int fsl_qspi_read(struct spi_nor *nor, loff_t from, struct fsl_qspi *q = nor->priv; u8 cmd = nor->read_opcode; - dev_dbg(q->dev, "cmd [%x],read from (0x%p, 0x%.8x, 0x%.8x),len:%d\n", - cmd, q->ahb_base, q->chip_base_addr, (unsigned int)from, len); + /* if necessary,ioremap buffer before AHB read, */ + if (!q->ahb_addr) { + q->memmap_offs = q->chip_base_addr + from; + q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP; + + q->ahb_addr = ioremap_nocache( + q->memmap_phy + q->memmap_offs, + q->memmap_len); + if (!q->ahb_addr) { + dev_err(q->dev, "ioremap failed\n"); + return -ENOMEM; + } + /* ioremap if the data requested is out of range */ + } else if (q->chip_base_addr + from < q->memmap_offs + || q->chip_base_addr + from + len > + q->memmap_offs + q->memmap_len) { + iounmap(q->ahb_addr); + + q->memmap_offs = q->chip_base_addr + from; + q->memmap_len = len > QUADSPI_MIN_IOMAP ? len : QUADSPI_MIN_IOMAP; + q->ahb_addr = ioremap_nocache( + q->memmap_phy + q->memmap_offs, + q->memmap_len); + if (!q->ahb_addr) { + dev_err(q->dev, "ioremap failed\n"); + return -ENOMEM; + } + } + + dev_dbg(q->dev, "cmd [%x],read from 0x%p, len:%d\n", + cmd, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, + len); /* Read out the data directly from the AHB buffer.*/ - memcpy(buf, q->ahb_base + q->chip_base_addr + from, len); + memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, + len); *retlen += len; return 0; @@ -761,26 +903,26 @@ static int fsl_qspi_prep(struct spi_nor *nor, enum spi_nor_ops ops) struct fsl_qspi *q = nor->priv; int ret; - ret = clk_enable(q->clk_en); - if (ret) - return ret; + mutex_lock(&q->lock); - ret = clk_enable(q->clk); - if (ret) { - clk_disable(q->clk_en); - return ret; - } + ret = fsl_qspi_clk_prep_enable(q); + if (ret) + goto err_mutex; fsl_qspi_set_base_addr(q, nor); return 0; + +err_mutex: + mutex_unlock(&q->lock); + return ret; } static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) { struct fsl_qspi *q = nor->priv; - clk_disable(q->clk); - clk_disable(q->clk_en); + fsl_qspi_clk_disable_unprep(q); + mutex_unlock(&q->lock); } static int fsl_qspi_probe(struct platform_device *pdev) @@ -804,6 +946,10 @@ static int fsl_qspi_probe(struct platform_device *pdev) if (!q->nor_num || q->nor_num > FSL_QSPI_MAX_CHIP) return -ENODEV; + q->dev = dev; + q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data; + platform_set_drvdata(pdev, q); + /* find the resources */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI"); q->iobase = devm_ioremap_resource(dev, res); @@ -812,9 +958,11 @@ static int fsl_qspi_probe(struct platform_device *pdev) res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "QuadSPI-memory"); - q->ahb_base = devm_ioremap_resource(dev, res); - if (IS_ERR(q->ahb_base)) - return PTR_ERR(q->ahb_base); + if (!devm_request_mem_region(dev, res->start, resource_size(res), + res->name)) { + dev_err(dev, "can't request region for resource %pR\n", res); + return -EBUSY; + } q->memmap_phy = res->start; @@ -827,15 +975,9 @@ static int fsl_qspi_probe(struct platform_device *pdev) if (IS_ERR(q->clk)) return PTR_ERR(q->clk); - ret = clk_prepare_enable(q->clk_en); - if (ret) { - dev_err(dev, "cannot enable the qspi_en clock: %d\n", ret); - return ret; - } - - ret = clk_prepare_enable(q->clk); + ret = fsl_qspi_clk_prep_enable(q); if (ret) { - dev_err(dev, "cannot enable the qspi clock: %d\n", ret); + dev_err(dev, "can not enable the clock\n"); goto clk_failed; } @@ -853,10 +995,6 @@ static int fsl_qspi_probe(struct platform_device *pdev) goto irq_failed; } - q->dev = dev; - q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data; - platform_set_drvdata(pdev, q); - ret = fsl_qspi_nor_setup(q); if (ret) goto irq_failed; @@ -864,6 +1002,8 @@ static int fsl_qspi_probe(struct platform_device *pdev) if (of_get_property(np, "fsl,qspi-has-second-chip", NULL)) q->has_second_chip = true; + mutex_init(&q->lock); + /* iterate the subnodes. */ for_each_available_child_of_node(dev->of_node, np) { char modalias[40]; @@ -892,24 +1032,24 @@ static int fsl_qspi_probe(struct platform_device *pdev) ret = of_modalias_node(np, modalias, sizeof(modalias)); if (ret < 0) - goto irq_failed; + goto mutex_failed; ret = of_property_read_u32(np, "spi-max-frequency", &q->clk_rate); if (ret < 0) - goto irq_failed; + goto mutex_failed; /* set the chip address for READID */ fsl_qspi_set_base_addr(q, nor); ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD); if (ret) - goto irq_failed; + goto mutex_failed; ppdata.of_node = np; ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); if (ret) - goto irq_failed; + goto mutex_failed; /* Set the correct NOR size now. */ if (q->nor_size == 0) { @@ -939,8 +1079,7 @@ static int fsl_qspi_probe(struct platform_device *pdev) if (ret) goto last_init_failed; - clk_disable(q->clk); - clk_disable(q->clk_en); + fsl_qspi_clk_disable_unprep(q); return 0; last_init_failed: @@ -950,10 +1089,12 @@ last_init_failed: i *= 2; mtd_device_unregister(&q->mtd[i]); } +mutex_failed: + mutex_destroy(&q->lock); irq_failed: - clk_disable_unprepare(q->clk); + fsl_qspi_clk_disable_unprep(q); clk_failed: - clk_disable_unprepare(q->clk_en); + dev_err(dev, "Freescale QuadSPI probe failed\n"); return ret; } @@ -973,8 +1114,11 @@ static int fsl_qspi_remove(struct platform_device *pdev) writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); writel(0x0, q->iobase + QUADSPI_RSER); - clk_unprepare(q->clk); - clk_unprepare(q->clk_en); + mutex_destroy(&q->lock); + + if (q->ahb_addr) + iounmap(q->ahb_addr); + return 0; } @@ -985,12 +1129,19 @@ static int fsl_qspi_suspend(struct platform_device *pdev, pm_message_t state) static int fsl_qspi_resume(struct platform_device *pdev) { + int ret; struct fsl_qspi *q = platform_get_drvdata(pdev); + ret = fsl_qspi_clk_prep_enable(q); + if (ret) + return ret; + fsl_qspi_nor_setup(q); fsl_qspi_set_map_addr(q); fsl_qspi_nor_setup_last(q); + fsl_qspi_clk_disable_unprep(q); + return 0; } diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c new file mode 100644 index 000000000000..9ad1dd0896c0 --- /dev/null +++ b/drivers/mtd/spi-nor/nxp-spifi.c @@ -0,0 +1,482 @@ +/* + * SPI-NOR driver for NXP SPI Flash Interface (SPIFI) + * + * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> + * + * Based on Freescale QuadSPI driver: + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/spi-nor.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> + +/* NXP SPIFI registers, bits and macros */ +#define SPIFI_CTRL 0x000 +#define SPIFI_CTRL_TIMEOUT(timeout) (timeout) +#define SPIFI_CTRL_CSHIGH(cshigh) ((cshigh) << 16) +#define SPIFI_CTRL_MODE3 BIT(23) +#define SPIFI_CTRL_DUAL BIT(28) +#define SPIFI_CTRL_FBCLK BIT(30) +#define SPIFI_CMD 0x004 +#define SPIFI_CMD_DATALEN(dlen) ((dlen) & 0x3fff) +#define SPIFI_CMD_DOUT BIT(15) +#define SPIFI_CMD_INTLEN(ilen) ((ilen) << 16) +#define SPIFI_CMD_FIELDFORM(field) ((field) << 19) +#define SPIFI_CMD_FIELDFORM_ALL_SERIAL SPIFI_CMD_FIELDFORM(0x0) +#define SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA SPIFI_CMD_FIELDFORM(0x1) +#define SPIFI_CMD_FRAMEFORM(frame) ((frame) << 21) +#define SPIFI_CMD_FRAMEFORM_OPCODE_ONLY SPIFI_CMD_FRAMEFORM(0x1) +#define SPIFI_CMD_OPCODE(op) ((op) << 24) +#define SPIFI_ADDR 0x008 +#define SPIFI_IDATA 0x00c +#define SPIFI_CLIMIT 0x010 +#define SPIFI_DATA 0x014 +#define SPIFI_MCMD 0x018 +#define SPIFI_STAT 0x01c +#define SPIFI_STAT_MCINIT BIT(0) +#define SPIFI_STAT_CMD BIT(1) +#define SPIFI_STAT_RESET BIT(4) + +#define SPI_NOR_MAX_ID_LEN 6 + +struct nxp_spifi { + struct device *dev; + struct clk *clk_spifi; + struct clk *clk_reg; + void __iomem *io_base; + void __iomem *flash_base; + struct mtd_info mtd; + struct spi_nor nor; + bool memory_mode; + u32 mcmd; +}; + +static int nxp_spifi_wait_for_cmd(struct nxp_spifi *spifi) +{ + u8 stat; + int ret; + + ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, + !(stat & SPIFI_STAT_CMD), 10, 30); + if (ret) + dev_warn(spifi->dev, "command timed out\n"); + + return ret; +} + +static int nxp_spifi_reset(struct nxp_spifi *spifi) +{ + u8 stat; + int ret; + + writel(SPIFI_STAT_RESET, spifi->io_base + SPIFI_STAT); + ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, + !(stat & SPIFI_STAT_RESET), 10, 30); + if (ret) + dev_warn(spifi->dev, "state reset timed out\n"); + + return ret; +} + +static int nxp_spifi_set_memory_mode_off(struct nxp_spifi *spifi) +{ + int ret; + + if (!spifi->memory_mode) + return 0; + + ret = nxp_spifi_reset(spifi); + if (ret) + dev_err(spifi->dev, "unable to enter command mode\n"); + else + spifi->memory_mode = false; + + return ret; +} + +static int nxp_spifi_set_memory_mode_on(struct nxp_spifi *spifi) +{ + u8 stat; + int ret; + + if (spifi->memory_mode) + return 0; + + writel(spifi->mcmd, spifi->io_base + SPIFI_MCMD); + ret = readb_poll_timeout(spifi->io_base + SPIFI_STAT, stat, + stat & SPIFI_STAT_MCINIT, 10, 30); + if (ret) + dev_err(spifi->dev, "unable to enter memory mode\n"); + else + spifi->memory_mode = true; + + return ret; +} + +static int nxp_spifi_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) +{ + struct nxp_spifi *spifi = nor->priv; + u32 cmd; + int ret; + + ret = nxp_spifi_set_memory_mode_off(spifi); + if (ret) + return ret; + + cmd = SPIFI_CMD_DATALEN(len) | + SPIFI_CMD_OPCODE(opcode) | + SPIFI_CMD_FIELDFORM_ALL_SERIAL | + SPIFI_CMD_FRAMEFORM_OPCODE_ONLY; + writel(cmd, spifi->io_base + SPIFI_CMD); + + while (len--) + *buf++ = readb(spifi->io_base + SPIFI_DATA); + + return nxp_spifi_wait_for_cmd(spifi); +} + +static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, + int len, int write_enable) +{ + struct nxp_spifi *spifi = nor->priv; + u32 cmd; + int ret; + + ret = nxp_spifi_set_memory_mode_off(spifi); + if (ret) + return ret; + + cmd = SPIFI_CMD_DOUT | + SPIFI_CMD_DATALEN(len) | + SPIFI_CMD_OPCODE(opcode) | + SPIFI_CMD_FIELDFORM_ALL_SERIAL | + SPIFI_CMD_FRAMEFORM_OPCODE_ONLY; + writel(cmd, spifi->io_base + SPIFI_CMD); + + while (len--) + writeb(*buf++, spifi->io_base + SPIFI_DATA); + + return nxp_spifi_wait_for_cmd(spifi); +} + +static int nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct nxp_spifi *spifi = nor->priv; + int ret; + + ret = nxp_spifi_set_memory_mode_on(spifi); + if (ret) + return ret; + + memcpy_fromio(buf, spifi->flash_base + from, len); + *retlen += len; + + return 0; +} + +static void nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len, + size_t *retlen, const u_char *buf) +{ + struct nxp_spifi *spifi = nor->priv; + u32 cmd; + int ret; + + ret = nxp_spifi_set_memory_mode_off(spifi); + if (ret) + return; + + writel(to, spifi->io_base + SPIFI_ADDR); + *retlen += len; + + cmd = SPIFI_CMD_DOUT | + SPIFI_CMD_DATALEN(len) | + SPIFI_CMD_FIELDFORM_ALL_SERIAL | + SPIFI_CMD_OPCODE(nor->program_opcode) | + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + writel(cmd, spifi->io_base + SPIFI_CMD); + + while (len--) + writeb(*buf++, spifi->io_base + SPIFI_DATA); + + nxp_spifi_wait_for_cmd(spifi); +} + +static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs) +{ + struct nxp_spifi *spifi = nor->priv; + u32 cmd; + int ret; + + ret = nxp_spifi_set_memory_mode_off(spifi); + if (ret) + return ret; + + writel(offs, spifi->io_base + SPIFI_ADDR); + + cmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL | + SPIFI_CMD_OPCODE(nor->erase_opcode) | + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + writel(cmd, spifi->io_base + SPIFI_CMD); + + return nxp_spifi_wait_for_cmd(spifi); +} + +static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi) +{ + switch (spifi->nor.flash_read) { + case SPI_NOR_NORMAL: + case SPI_NOR_FAST: + spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL; + break; + case SPI_NOR_DUAL: + case SPI_NOR_QUAD: + spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA; + break; + default: + dev_err(spifi->dev, "unsupported SPI read mode\n"); + return -EINVAL; + } + + /* Memory mode supports address length between 1 and 4 */ + if (spifi->nor.addr_width < 1 || spifi->nor.addr_width > 4) + return -EINVAL; + + spifi->mcmd |= SPIFI_CMD_OPCODE(spifi->nor.read_opcode) | + SPIFI_CMD_INTLEN(spifi->nor.read_dummy / 8) | + SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1); + + return 0; +} + +static void nxp_spifi_dummy_id_read(struct spi_nor *nor) +{ + u8 id[SPI_NOR_MAX_ID_LEN]; + nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); +} + +static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, + struct device_node *np) +{ + struct mtd_part_parser_data ppdata; + enum read_mode flash_read; + u32 ctrl, property; + u16 mode = 0; + int ret; + + if (!of_property_read_u32(np, "spi-rx-bus-width", &property)) { + switch (property) { + case 1: + break; + case 2: + mode |= SPI_RX_DUAL; + break; + case 4: + mode |= SPI_RX_QUAD; + break; + default: + dev_err(spifi->dev, "unsupported rx-bus-width\n"); + return -EINVAL; + } + } + + if (of_find_property(np, "spi-cpha", NULL)) + mode |= SPI_CPHA; + + if (of_find_property(np, "spi-cpol", NULL)) + mode |= SPI_CPOL; + + /* Setup control register defaults */ + ctrl = SPIFI_CTRL_TIMEOUT(1000) | + SPIFI_CTRL_CSHIGH(15) | + SPIFI_CTRL_FBCLK; + + if (mode & SPI_RX_DUAL) { + ctrl |= SPIFI_CTRL_DUAL; + flash_read = SPI_NOR_DUAL; + } else if (mode & SPI_RX_QUAD) { + ctrl &= ~SPIFI_CTRL_DUAL; + flash_read = SPI_NOR_QUAD; + } else { + ctrl |= SPIFI_CTRL_DUAL; + flash_read = SPI_NOR_NORMAL; + } + + switch (mode & (SPI_CPHA | SPI_CPOL)) { + case SPI_MODE_0: + ctrl &= ~SPIFI_CTRL_MODE3; + break; + case SPI_MODE_3: + ctrl |= SPIFI_CTRL_MODE3; + break; + default: + dev_err(spifi->dev, "only mode 0 and 3 supported\n"); + return -EINVAL; + } + + writel(ctrl, spifi->io_base + SPIFI_CTRL); + + spifi->mtd.priv = &spifi->nor; + spifi->nor.mtd = &spifi->mtd; + spifi->nor.dev = spifi->dev; + spifi->nor.priv = spifi; + spifi->nor.read = nxp_spifi_read; + spifi->nor.write = nxp_spifi_write; + spifi->nor.erase = nxp_spifi_erase; + spifi->nor.read_reg = nxp_spifi_read_reg; + spifi->nor.write_reg = nxp_spifi_write_reg; + + /* + * The first read on a hard reset isn't reliable so do a + * dummy read of the id before calling spi_nor_scan(). + * The reason for this problem is unknown. + * + * The official NXP spifilib uses more or less the same + * workaround that is applied here by reading the device + * id multiple times. + */ + nxp_spifi_dummy_id_read(&spifi->nor); + + ret = spi_nor_scan(&spifi->nor, NULL, flash_read); + if (ret) { + dev_err(spifi->dev, "device scan failed\n"); + return ret; + } + + ret = nxp_spifi_setup_memory_cmd(spifi); + if (ret) { + dev_err(spifi->dev, "memory command setup failed\n"); + return ret; + } + + ppdata.of_node = np; + ret = mtd_device_parse_register(&spifi->mtd, NULL, &ppdata, NULL, 0); + if (ret) { + dev_err(spifi->dev, "mtd device parse failed\n"); + return ret; + } + + return 0; +} + +static int nxp_spifi_probe(struct platform_device *pdev) +{ + struct device_node *flash_np; + struct nxp_spifi *spifi; + struct resource *res; + int ret; + + spifi = devm_kzalloc(&pdev->dev, sizeof(*spifi), GFP_KERNEL); + if (!spifi) + return -ENOMEM; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "spifi"); + spifi->io_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(spifi->io_base)) + return PTR_ERR(spifi->io_base); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash"); + spifi->flash_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(spifi->flash_base)) + return PTR_ERR(spifi->flash_base); + + spifi->clk_spifi = devm_clk_get(&pdev->dev, "spifi"); + if (IS_ERR(spifi->clk_spifi)) { + dev_err(&pdev->dev, "spifi clock not found\n"); + return PTR_ERR(spifi->clk_spifi); + } + + spifi->clk_reg = devm_clk_get(&pdev->dev, "reg"); + if (IS_ERR(spifi->clk_reg)) { + dev_err(&pdev->dev, "reg clock not found\n"); + return PTR_ERR(spifi->clk_reg); + } + + ret = clk_prepare_enable(spifi->clk_reg); + if (ret) { + dev_err(&pdev->dev, "unable to enable reg clock\n"); + return ret; + } + + ret = clk_prepare_enable(spifi->clk_spifi); + if (ret) { + dev_err(&pdev->dev, "unable to enable spifi clock\n"); + goto dis_clk_reg; + } + + spifi->dev = &pdev->dev; + platform_set_drvdata(pdev, spifi); + + /* Initialize and reset device */ + nxp_spifi_reset(spifi); + writel(0, spifi->io_base + SPIFI_IDATA); + writel(0, spifi->io_base + SPIFI_MCMD); + nxp_spifi_reset(spifi); + + flash_np = of_get_next_available_child(pdev->dev.of_node, NULL); + if (!flash_np) { + dev_err(&pdev->dev, "no SPI flash device to configure\n"); + ret = -ENODEV; + goto dis_clks; + } + + ret = nxp_spifi_setup_flash(spifi, flash_np); + if (ret) { + dev_err(&pdev->dev, "unable to setup flash chip\n"); + goto dis_clks; + } + + return 0; + +dis_clks: + clk_disable_unprepare(spifi->clk_spifi); +dis_clk_reg: + clk_disable_unprepare(spifi->clk_reg); + return ret; +} + +static int nxp_spifi_remove(struct platform_device *pdev) +{ + struct nxp_spifi *spifi = platform_get_drvdata(pdev); + + mtd_device_unregister(&spifi->mtd); + clk_disable_unprepare(spifi->clk_spifi); + clk_disable_unprepare(spifi->clk_reg); + + return 0; +} + +static const struct of_device_id nxp_spifi_match[] = { + {.compatible = "nxp,lpc1773-spifi"}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, nxp_spifi_match); + +static struct platform_driver nxp_spifi_driver = { + .probe = nxp_spifi_probe, + .remove = nxp_spifi_remove, + .driver = { + .name = "nxp-spifi", + .of_match_table = nxp_spifi_match, + }, +}; +module_platform_driver(nxp_spifi_driver); + +MODULE_DESCRIPTION("NXP SPI Flash Interface driver"); +MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index d78831b4422b..c27d427fead4 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -29,6 +29,8 @@ #define SPI_NOR_MAX_ID_LEN 6 struct flash_info { + char *name; + /* * This array stores the ID bytes. * The first three bytes are the JEDIC ID. @@ -59,7 +61,7 @@ struct flash_info { #define JEDEC_MFR(info) ((info)->id[0]) -static const struct spi_device_id *spi_nor_match_id(const char *name); +static const struct flash_info *spi_nor_match_id(const char *name); /* * Read the status register, returning its value in the location @@ -169,7 +171,7 @@ static inline struct spi_nor *mtd_to_spi_nor(struct mtd_info *mtd) } /* Enable/disable 4-byte addressing mode. */ -static inline int set_4byte(struct spi_nor *nor, struct flash_info *info, +static inline int set_4byte(struct spi_nor *nor, const struct flash_info *info, int enable) { int status; @@ -469,7 +471,6 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) /* Used when the "_ext_id" is two bytes at most */ #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ .id = { \ ((_jedec_id) >> 16) & 0xff, \ ((_jedec_id) >> 8) & 0xff, \ @@ -481,11 +482,9 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = 256, \ - .flags = (_flags), \ - }) + .flags = (_flags), #define INFO6(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ .id = { \ ((_jedec_id) >> 16) & 0xff, \ ((_jedec_id) >> 8) & 0xff, \ @@ -498,17 +497,14 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = 256, \ - .flags = (_flags), \ - }) + .flags = (_flags), #define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags) \ - ((kernel_ulong_t)&(struct flash_info) { \ .sector_size = (_sector_size), \ .n_sectors = (_n_sectors), \ .page_size = (_page_size), \ .addr_width = (_addr_width), \ - .flags = (_flags), \ - }) + .flags = (_flags), /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which @@ -521,7 +517,7 @@ static int spi_nor_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) * For historical (and compatibility) reasons (before we got above config) some * old entries may be missing 4K flag. */ -static const struct spi_device_id spi_nor_ids[] = { +static const struct flash_info spi_nor_ids[] = { /* Atmel -- some are (confusingly) marketed as "DataFlash" */ { "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) }, { "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) }, @@ -589,7 +585,7 @@ static const struct spi_device_id spi_nor_ids[] = { /* Micron */ { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, SPI_NOR_QUAD_READ) }, - { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SPI_NOR_QUAD_READ) }, + { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SPI_NOR_QUAD_READ) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, @@ -626,6 +622,7 @@ static const struct spi_device_id spi_nor_ids[] = { { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, { "s25fl132k", INFO(0x014016, 0, 64 * 1024, 64, SECT_4K) }, { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) }, + { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K) }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, @@ -702,11 +699,11 @@ static const struct spi_device_id spi_nor_ids[] = { { }, }; -static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor) +static const struct flash_info *spi_nor_read_id(struct spi_nor *nor) { int tmp; u8 id[SPI_NOR_MAX_ID_LEN]; - struct flash_info *info; + const struct flash_info *info; tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); if (tmp < 0) { @@ -715,7 +712,7 @@ static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor) } for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) { - info = (void *)spi_nor_ids[tmp].driver_data; + info = &spi_nor_ids[tmp]; if (info->id_len) { if (!memcmp(info->id, id, info->id_len)) return &spi_nor_ids[tmp]; @@ -961,7 +958,7 @@ static int micron_quad_enable(struct spi_nor *nor) return 0; } -static int set_quad_mode(struct spi_nor *nor, struct flash_info *info) +static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info) { int status; @@ -1003,8 +1000,7 @@ static int spi_nor_check(struct spi_nor *nor) int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) { - const struct spi_device_id *id = NULL; - struct flash_info *info; + const struct flash_info *info = NULL; struct device *dev = nor->dev; struct mtd_info *mtd = nor->mtd; struct device_node *np = dev->of_node; @@ -1015,27 +1011,25 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (ret) return ret; - /* Try to auto-detect if chip name wasn't specified */ - if (!name) - id = spi_nor_read_id(nor); - else - id = spi_nor_match_id(name); - if (IS_ERR_OR_NULL(id)) + if (name) + info = spi_nor_match_id(name); + /* Try to auto-detect if chip name wasn't specified or not found */ + if (!info) + info = spi_nor_read_id(nor); + if (IS_ERR_OR_NULL(info)) return -ENOENT; - info = (void *)id->driver_data; - /* * If caller has specified name of flash model that can normally be * detected using JEDEC, let's verify it. */ if (name && info->id_len) { - const struct spi_device_id *jid; + const struct flash_info *jinfo; - jid = spi_nor_read_id(nor); - if (IS_ERR(jid)) { - return PTR_ERR(jid); - } else if (jid != id) { + jinfo = spi_nor_read_id(nor); + if (IS_ERR(jinfo)) { + return PTR_ERR(jinfo); + } else if (jinfo != info) { /* * JEDEC knows better, so overwrite platform ID. We * can't trust partitions any longer, but we'll let @@ -1044,9 +1038,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) * information, even if it's not 100% accurate. */ dev_warn(dev, "found %s, expected %s\n", - jid->name, id->name); - id = jid; - info = (void *)jid->driver_data; + jinfo->name, info->name); + info = jinfo; } } @@ -1196,7 +1189,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) nor->read_dummy = spi_nor_read_dummy_cycles(nor); - dev_info(dev, "%s (%lld Kbytes)\n", id->name, + dev_info(dev, "%s (%lld Kbytes)\n", info->name, (long long)mtd->size >> 10); dev_dbg(dev, @@ -1219,9 +1212,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) } EXPORT_SYMBOL_GPL(spi_nor_scan); -static const struct spi_device_id *spi_nor_match_id(const char *name) +static const struct flash_info *spi_nor_match_id(const char *name) { - const struct spi_device_id *id = spi_nor_ids; + const struct flash_info *id = spi_nor_ids; while (id->name[0]) { if (!strcmp(name, id->name)) diff --git a/drivers/mtd/tests/oobtest.c b/drivers/mtd/tests/oobtest.c index 8e8525f0202f..31762120eb56 100644 --- a/drivers/mtd/tests/oobtest.c +++ b/drivers/mtd/tests/oobtest.c @@ -125,7 +125,8 @@ static int write_whole_device(void) * Display the address, offset and data bytes at comparison failure. * Return number of bitflips encountered. */ -static size_t memcmpshow(loff_t addr, const void *cs, const void *ct, size_t count) +static size_t memcmpshowoffset(loff_t addr, loff_t offset, const void *cs, + const void *ct, size_t count) { const unsigned char *su1, *su2; int res; @@ -135,8 +136,9 @@ static size_t memcmpshow(loff_t addr, const void *cs, const void *ct, size_t cou for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--, i++) { res = *su1 ^ *su2; if (res) { - pr_info("error @addr[0x%lx:0x%zx] 0x%x -> 0x%x diff 0x%x\n", - (unsigned long)addr, i, *su1, *su2, res); + pr_info("error @addr[0x%lx:0x%lx] 0x%x -> 0x%x diff 0x%x\n", + (unsigned long)addr, (unsigned long)offset + i, + *su1, *su2, res); bitflips += hweight8(res); } } @@ -144,6 +146,9 @@ static size_t memcmpshow(loff_t addr, const void *cs, const void *ct, size_t cou return bitflips; } +#define memcmpshow(addr, cs, ct, count) memcmpshowoffset((addr), 0, (cs), (ct),\ + (count)) + /* * Compare with 0xff and show the address, offset and data bytes at * comparison failure. Return number of bitflips encountered. @@ -228,9 +233,10 @@ static int verify_eraseblock(int ebnum) errcnt += 1; return err ? err : -1; } - bitflips = memcmpshow(addr, readbuf + use_offset, - writebuf + (use_len_max * i) + use_offset, - use_len); + bitflips = memcmpshowoffset(addr, use_offset, + readbuf + use_offset, + writebuf + (use_len_max * i) + use_offset, + use_len); /* verify pre-offset area for 0xff */ bitflips += memffshow(addr, 0, readbuf, use_offset); |