diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/host/sdhci-of-arasan.c | 51 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-core.c | 13 |
2 files changed, 30 insertions, 34 deletions
diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c index 829ccef87426..d25a4b50c2f3 100644 --- a/drivers/mmc/host/sdhci-of-arasan.c +++ b/drivers/mmc/host/sdhci-of-arasan.c @@ -30,7 +30,10 @@ #define SDHCI_ARASAN_VENDOR_REGISTER 0x78 #define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8 +#define SDHCI_ARASAN_ITAPDLY_SEL_MASK 0xFF + #define SDHCI_ARASAN_OTAPDLY_REGISTER 0xF0FC +#define SDHCI_ARASAN_OTAPDLY_SEL_MASK 0x3F #define SDHCI_ARASAN_CQE_BASE_ADDR 0x200 #define VENDOR_ENHANCED_STROBE BIT(0) @@ -600,14 +603,8 @@ static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees) u8 tap_delay, tap_max = 0; int ret; - /* - * This is applicable for SDHCI_SPEC_300 and above - * ZynqMP does not set phase for <=25MHz clock. - * If degrees is zero, no need to do anything. - */ - if (host->version < SDHCI_SPEC_300 || - host->timing == MMC_TIMING_LEGACY || - host->timing == MMC_TIMING_UHS_SDR12 || !degrees) + /* This is applicable for SDHCI_SPEC_300 and above */ + if (host->version < SDHCI_SPEC_300) return 0; switch (host->timing) { @@ -638,6 +635,9 @@ static int sdhci_zynqmp_sdcardclk_set_phase(struct clk_hw *hw, int degrees) if (ret) pr_err("Error setting Output Tap Delay\n"); + /* Release DLL Reset */ + zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_RELEASE); + return ret; } @@ -668,16 +668,13 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct clk_hw *hw, int degrees) u8 tap_delay, tap_max = 0; int ret; - /* - * This is applicable for SDHCI_SPEC_300 and above - * ZynqMP does not set phase for <=25MHz clock. - * If degrees is zero, no need to do anything. - */ - if (host->version < SDHCI_SPEC_300 || - host->timing == MMC_TIMING_LEGACY || - host->timing == MMC_TIMING_UHS_SDR12 || !degrees) + /* This is applicable for SDHCI_SPEC_300 and above */ + if (host->version < SDHCI_SPEC_300) return 0; + /* Assert DLL Reset */ + zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_ASSERT); + switch (host->timing) { case MMC_TIMING_MMC_HS: case MMC_TIMING_SD_HS: @@ -733,14 +730,8 @@ static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees) struct sdhci_host *host = sdhci_arasan->host; u8 tap_delay, tap_max = 0; - /* - * This is applicable for SDHCI_SPEC_300 and above - * Versal does not set phase for <=25MHz clock. - * If degrees is zero, no need to do anything. - */ - if (host->version < SDHCI_SPEC_300 || - host->timing == MMC_TIMING_LEGACY || - host->timing == MMC_TIMING_UHS_SDR12 || !degrees) + /* This is applicable for SDHCI_SPEC_300 and above */ + if (host->version < SDHCI_SPEC_300) return 0; switch (host->timing) { @@ -773,6 +764,7 @@ static int sdhci_versal_sdcardclk_set_phase(struct clk_hw *hw, int degrees) regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER); regval |= SDHCI_OTAPDLY_ENABLE; sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER); + regval &= ~SDHCI_ARASAN_OTAPDLY_SEL_MASK; regval |= tap_delay; sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER); } @@ -804,14 +796,8 @@ static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees) struct sdhci_host *host = sdhci_arasan->host; u8 tap_delay, tap_max = 0; - /* - * This is applicable for SDHCI_SPEC_300 and above - * Versal does not set phase for <=25MHz clock. - * If degrees is zero, no need to do anything. - */ - if (host->version < SDHCI_SPEC_300 || - host->timing == MMC_TIMING_LEGACY || - host->timing == MMC_TIMING_UHS_SDR12 || !degrees) + /* This is applicable for SDHCI_SPEC_300 and above */ + if (host->version < SDHCI_SPEC_300) return 0; switch (host->timing) { @@ -846,6 +832,7 @@ static int sdhci_versal_sampleclk_set_phase(struct clk_hw *hw, int degrees) sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); regval |= SDHCI_ITAPDLY_ENABLE; sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval &= ~SDHCI_ARASAN_ITAPDLY_SEL_MASK; regval |= tap_delay; sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); regval &= ~SDHCI_ITAPDLY_CHGWIN; diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 23da7f7fe093..9552708846ca 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -665,6 +665,15 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode, } } +static void sdhci_intel_set_uhs_signaling(struct sdhci_host *host, + unsigned int timing) +{ + /* Set UHS timing to SDR25 for High Speed mode */ + if (timing == MMC_TIMING_MMC_HS || timing == MMC_TIMING_SD_HS) + timing = MMC_TIMING_UHS_SDR25; + sdhci_set_uhs_signaling(host, timing); +} + #define INTEL_HS400_ES_REG 0x78 #define INTEL_HS400_ES_BIT BIT(0) @@ -721,7 +730,7 @@ static const struct sdhci_ops sdhci_intel_byt_ops = { .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, - .set_uhs_signaling = sdhci_set_uhs_signaling, + .set_uhs_signaling = sdhci_intel_set_uhs_signaling, .hw_reset = sdhci_pci_hw_reset, }; @@ -731,7 +740,7 @@ static const struct sdhci_ops sdhci_intel_glk_ops = { .enable_dma = sdhci_pci_enable_dma, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_cqhci_reset, - .set_uhs_signaling = sdhci_set_uhs_signaling, + .set_uhs_signaling = sdhci_intel_set_uhs_signaling, .hw_reset = sdhci_pci_hw_reset, .irq = sdhci_cqhci_irq, }; |