diff options
Diffstat (limited to 'drivers/mfd')
33 files changed, 1350 insertions, 176 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 26ad6468d13a..294d9567cc71 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -16,7 +16,7 @@ config MFD_CS5535 depends on PCI && (X86_32 || (X86 && COMPILE_TEST)) ---help--- This is the core driver for CS5535/CS5536 MFD functions. This is - necessary for using the board's GPIO and MFGPT functionality. + necessary for using the board's GPIO and MFGPT functionality. config MFD_ALTERA_A10SR bool "Altera Arria10 DevKit System Resource chip" @@ -29,6 +29,16 @@ config MFD_ALTERA_A10SR accessing the external gpio extender (LEDs & buttons) and power supply alarms (hwmon). +config MFD_ALTERA_SYSMGR + bool "Altera SOCFPGA System Manager" + depends on (ARCH_SOCFPGA || ARCH_STRATIX10) && OF + select MFD_SYSCON + help + Select this to get System Manager support for all Altera branded + SOCFPGAs. The SOCFPGA System Manager handles all SOCFPGAs by + using regmap_mmio accesses for ARM32 parts and SMC calls to + EL3 for ARM64 parts. + config MFD_ACT8945A tristate "Active-semi ACT8945A" select MFD_CORE @@ -213,13 +223,13 @@ config MFD_CROS_EC protocol for talking to the EC is defined by the bus driver. config MFD_CROS_EC_CHARDEV - tristate "Chrome OS Embedded Controller userspace device interface" - depends on MFD_CROS_EC - ---help--- - This driver adds support to talk with the ChromeOS EC from userspace. + tristate "Chrome OS Embedded Controller userspace device interface" + depends on MFD_CROS_EC + ---help--- + This driver adds support to talk with the ChromeOS EC from userspace. - If you have a supported Chromebook, choose Y or M here. - The module will be called cros_ec_dev. + If you have a supported Chromebook, choose Y or M here. + The module will be called cros_ec_dev. config MFD_MADERA tristate "Cirrus Logic Madera codecs" @@ -733,6 +743,20 @@ config MFD_MAX77620 provides common support for accessing the device; additional drivers must be enabled in order to use the functionality of the device. +config MFD_MAX77650 + tristate "Maxim MAX77650/77651 PMIC Support" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Say Y here to add support for Maxim Semiconductor MAX77650 and + MAX77651 Power Management ICs. This is the core multifunction + driver for interacting with the device. The module name is + 'max77650'. Additional drivers can be enabled in order to use + the following functionalities of the device: GPIO, regulator, + charger, LED, onkey. + config MFD_MAX77686 tristate "Maxim Semiconductor MAX77686/802 PMIC Support" depends on I2C @@ -867,7 +891,7 @@ config MFD_CPCAP At least Motorola Droid 4 is known to use CPCAP. config MFD_VIPERBOARD - tristate "Nano River Technologies Viperboard" + tristate "Nano River Technologies Viperboard" select MFD_CORE depends on USB default n @@ -903,15 +927,15 @@ config PCF50633_ADC tristate "NXP PCF50633 ADC" depends on MFD_PCF50633 help - Say yes here if you want to include support for ADC in the - NXP PCF50633 chip. + Say yes here if you want to include support for ADC in the + NXP PCF50633 chip. config PCF50633_GPIO tristate "NXP PCF50633 GPIO" depends on MFD_PCF50633 help - Say yes here if you want to include support GPIO for pins on - the PCF50633 chip. + Say yes here if you want to include support GPIO for pins on + the PCF50633 chip. config UCB1400_CORE tristate "Philips UCB1400 Core driver" @@ -1026,7 +1050,7 @@ config MFD_RN5T618 select REGMAP_I2C help Say yes here to add support for the Ricoh RN5T567, - RN5T618, RC5T619 PMIC. + RN5T618, RC5T619 PMIC. This driver provides common support for accessing the device, additional drivers must be enabled in order to use the functionality of the device. @@ -1079,9 +1103,9 @@ config MFD_SM501_GPIO bool "Export GPIO via GPIO layer" depends on MFD_SM501 && GPIOLIB ---help--- - This option uses the gpio library layer to export the 64 GPIO - lines on the SM501. The platform data is used to supply the - base number for the first GPIO line to register. + This option uses the gpio library layer to export the 64 GPIO + lines on the SM501. The platform data is used to supply the + base number for the first GPIO line to register. config MFD_SKY81452 tristate "Skyworks Solutions SKY81452" @@ -1096,16 +1120,16 @@ config MFD_SKY81452 will be called sky81452. config MFD_SMSC - bool "SMSC ECE1099 series chips" - depends on I2C=y - select MFD_CORE - select REGMAP_I2C - help - If you say yes here you get support for the - ece1099 chips from SMSC. + bool "SMSC ECE1099 series chips" + depends on I2C=y + select MFD_CORE + select REGMAP_I2C + help + If you say yes here you get support for the + ece1099 chips from SMSC. - To compile this driver as a module, choose M here: the - module will be called smsc. + To compile this driver as a module, choose M here: the + module will be called smsc. config MFD_SC27XX_PMIC tristate "Spreadtrum SC27xx PMICs" @@ -1171,12 +1195,12 @@ config AB8500_CORE This chip embeds various other multimedia funtionalities as well. config AB8500_DEBUG - bool "Enable debug info via debugfs" - depends on AB8500_GPADC && DEBUG_FS - default y if DEBUG_FS - help - Select this option if you want debug information using the debug - filesystem, debugfs. + bool "Enable debug info via debugfs" + depends on AB8500_GPADC && DEBUG_FS + default y if DEBUG_FS + help + Select this option if you want debug information using the debug + filesystem, debugfs. config AB8500_GPADC bool "ST-Ericsson AB8500 GPADC driver" @@ -1907,6 +1931,19 @@ config MFD_STPMIC1 To compile this driver as a module, choose M here: the module will be called stpmic1. +config MFD_STMFX + tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)" + depends on I2C + depends on OF || COMPILE_TEST + select MFD_CORE + select REGMAP_I2C + help + Support for the STMicroelectronics Multi-Function eXpander. + + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the functionality + of the device. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index b4569ed7f3f3..52b1a90ff515 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o obj-$(CONFIG_MFD_MAX14577) += max14577.o obj-$(CONFIG_MFD_MAX77620) += max77620.o +obj-$(CONFIG_MFD_MAX77650) += max77650.o obj-$(CONFIG_MFD_MAX77686) += max77686.o obj-$(CONFIG_MFD_MAX77693) += max77693.o obj-$(CONFIG_MFD_MAX77843) += max77843.o @@ -237,6 +238,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o +obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o @@ -246,4 +248,4 @@ obj-$(CONFIG_MFD_MXS_LRADC) += mxs-lradc.o obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc27xx-spi.o obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o - +obj-$(CONFIG_MFD_STMFX) += stmfx.o diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c index 8d652b2f9d14..f70d3f6a959b 100644 --- a/drivers/mfd/ab8500-debugfs.c +++ b/drivers/mfd/ab8500-debugfs.c @@ -2587,7 +2587,7 @@ static ssize_t ab8500_unsubscribe_write(struct file *file, } /* - * - several deubgfs nodes fops + * - several debugfs nodes fops */ static const struct file_operations ab8500_bank_fops = { diff --git a/drivers/mfd/altera-sysmgr.c b/drivers/mfd/altera-sysmgr.c new file mode 100644 index 000000000000..8976f82785bb --- /dev/null +++ b/drivers/mfd/altera-sysmgr.c @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018-2019, Intel Corporation. + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Linaro Ltd. + * + * Based on syscon driver. + */ + +#include <linux/arm-smccc.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/mfd/altera-sysmgr.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +/** + * struct altr_sysmgr - Altera SOCFPGA System Manager + * @regmap: the regmap used for System Manager accesses. + * @base : the base address for the System Manager + */ +struct altr_sysmgr { + struct regmap *regmap; + resource_size_t *base; +}; + +static struct platform_driver altr_sysmgr_driver; + +/** + * s10_protected_reg_write + * Write to a protected SMC register. + * @base: Base address of System Manager + * @reg: Address offset of register + * @val: Value to write + * Return: INTEL_SIP_SMC_STATUS_OK (0) on success + * INTEL_SIP_SMC_REG_ERROR on error + * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported + */ +static int s10_protected_reg_write(void *base, + unsigned int reg, unsigned int val) +{ + struct arm_smccc_res result; + unsigned long sysmgr_base = (unsigned long)base; + + arm_smccc_smc(INTEL_SIP_SMC_REG_WRITE, sysmgr_base + reg, + val, 0, 0, 0, 0, 0, &result); + + return (int)result.a0; +} + +/** + * s10_protected_reg_read + * Read the status of a protected SMC register + * @base: Base address of System Manager. + * @reg: Address of register + * @val: Value read. + * Return: INTEL_SIP_SMC_STATUS_OK (0) on success + * INTEL_SIP_SMC_REG_ERROR on error + * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION if not supported + */ +static int s10_protected_reg_read(void *base, + unsigned int reg, unsigned int *val) +{ + struct arm_smccc_res result; + unsigned long sysmgr_base = (unsigned long)base; + + arm_smccc_smc(INTEL_SIP_SMC_REG_READ, sysmgr_base + reg, + 0, 0, 0, 0, 0, 0, &result); + + *val = (unsigned int)result.a1; + + return (int)result.a0; +} + +static struct regmap_config altr_sysmgr_regmap_cfg = { + .name = "altr_sysmgr", + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, + .use_single_read = true, + .use_single_write = true, +}; + +/** + * sysmgr_match_phandle + * Matching function used by driver_find_device(). + * Return: True if match is found, otherwise false. + */ +static int sysmgr_match_phandle(struct device *dev, void *data) +{ + return dev->of_node == (struct device_node *)data; +} + +/** + * altr_sysmgr_regmap_lookup_by_phandle + * Find the sysmgr previous configured in probe() and return regmap property. + * Return: regmap if found or error if not found. + */ +struct regmap *altr_sysmgr_regmap_lookup_by_phandle(struct device_node *np, + const char *property) +{ + struct device *dev; + struct altr_sysmgr *sysmgr; + struct device_node *sysmgr_np; + + if (property) + sysmgr_np = of_parse_phandle(np, property, 0); + else + sysmgr_np = np; + + if (!sysmgr_np) + return ERR_PTR(-ENODEV); + + dev = driver_find_device(&altr_sysmgr_driver.driver, NULL, + (void *)sysmgr_np, sysmgr_match_phandle); + of_node_put(sysmgr_np); + if (!dev) + return ERR_PTR(-EPROBE_DEFER); + + sysmgr = dev_get_drvdata(dev); + + return sysmgr->regmap; +} +EXPORT_SYMBOL_GPL(altr_sysmgr_regmap_lookup_by_phandle); + +static int sysmgr_probe(struct platform_device *pdev) +{ + struct altr_sysmgr *sysmgr; + struct regmap *regmap; + struct resource *res; + struct regmap_config sysmgr_config = altr_sysmgr_regmap_cfg; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + + sysmgr = devm_kzalloc(dev, sizeof(*sysmgr), GFP_KERNEL); + if (!sysmgr) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOENT; + + sysmgr_config.max_register = resource_size(res) - + sysmgr_config.reg_stride; + if (of_device_is_compatible(np, "altr,sys-mgr-s10")) { + /* Need physical address for SMCC call */ + sysmgr->base = (resource_size_t *)res->start; + sysmgr_config.reg_read = s10_protected_reg_read; + sysmgr_config.reg_write = s10_protected_reg_write; + + regmap = devm_regmap_init(dev, NULL, sysmgr->base, + &sysmgr_config); + } else { + sysmgr->base = devm_ioremap(dev, res->start, + resource_size(res)); + if (!sysmgr->base) + return -ENOMEM; + + sysmgr_config.max_register = res->end - res->start - 3; + regmap = devm_regmap_init_mmio(dev, sysmgr->base, + &sysmgr_config); + } + + if (IS_ERR(regmap)) { + pr_err("regmap init failed\n"); + return PTR_ERR(regmap); + } + + sysmgr->regmap = regmap; + + platform_set_drvdata(pdev, sysmgr); + + return 0; +} + +static const struct of_device_id altr_sysmgr_of_match[] = { + { .compatible = "altr,sys-mgr" }, + { .compatible = "altr,sys-mgr-s10" }, + {}, +}; +MODULE_DEVICE_TABLE(of, altr_sysmgr_of_match); + +static struct platform_driver altr_sysmgr_driver = { + .probe = sysmgr_probe, + .driver = { + .name = "altr,system_manager", + .of_match_table = altr_sysmgr_of_match, + }, +}; + +static int __init altr_sysmgr_init(void) +{ + return platform_driver_register(&altr_sysmgr_driver); +} +core_initcall(altr_sysmgr_init); + +static void __exit altr_sysmgr_exit(void) +{ + platform_driver_unregister(&altr_sysmgr_driver); +} +module_exit(altr_sysmgr_exit); + +MODULE_AUTHOR("Thor Thayer <>"); +MODULE_DESCRIPTION("SOCFPGA System Manager driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/atmel-hlcdc.c b/drivers/mfd/atmel-hlcdc.c index e82543bcfdc8..35a9e16f9902 100644 --- a/drivers/mfd/atmel-hlcdc.c +++ b/drivers/mfd/atmel-hlcdc.c @@ -141,6 +141,7 @@ static const struct of_device_id atmel_hlcdc_match[] = { { .compatible = "atmel,sama5d2-hlcdc" }, { .compatible = "atmel,sama5d3-hlcdc" }, { .compatible = "atmel,sama5d4-hlcdc" }, + { .compatible = "microchip,sam9x60-hlcdc" }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, atmel_hlcdc_match); diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c index a7b7c5423ea5..c2e8a0dee7f8 100644 --- a/drivers/mfd/axp20x-i2c.c +++ b/drivers/mfd/axp20x-i2c.c @@ -65,6 +65,7 @@ static const struct of_device_id axp20x_i2c_of_match[] = { { .compatible = "x-powers,axp202", .data = (void *)AXP202_ID }, { .compatible = "x-powers,axp209", .data = (void *)AXP209_ID }, { .compatible = "x-powers,axp221", .data = (void *)AXP221_ID }, + { .compatible = "x-powers,axp223", .data = (void *)AXP223_ID }, { .compatible = "x-powers,axp806", .data = (void *)AXP806_ID }, { }, }; @@ -75,6 +76,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = { { "axp202", 0 }, { "axp209", 0 }, { "axp221", 0 }, + { "axp223", 0 }, { "axp806", 0 }, { }, }; diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c index 3c97f2c0fdfe..2215660dfa05 100644 --- a/drivers/mfd/axp20x.c +++ b/drivers/mfd/axp20x.c @@ -198,6 +198,12 @@ static const struct resource axp22x_usb_power_supply_resources[] = { DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"), }; +/* AXP803 and AXP813/AXP818 share the same interrupts */ +static const struct resource axp803_usb_power_supply_resources[] = { + DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_PLUGIN, "VBUS_PLUGIN"), + DEFINE_RES_IRQ_NAMED(AXP803_IRQ_VBUS_REMOVAL, "VBUS_REMOVAL"), +}; + static const struct resource axp22x_pek_resources[] = { DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_RIS_EDGE, "PEK_DBR"), DEFINE_RES_IRQ_NAMED(AXP22X_IRQ_PEK_FAL_EDGE, "PEK_DBF"), @@ -741,6 +747,11 @@ static const struct mfd_cell axp803_cells[] = { .of_compatible = "x-powers,axp813-ac-power-supply", .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), .resources = axp20x_ac_power_supply_resources, + }, { + .name = "axp20x-usb-power-supply", + .num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources), + .resources = axp803_usb_power_supply_resources, + .of_compatible = "x-powers,axp813-usb-power-supply", }, { .name = "axp20x-regulator" }, }; @@ -793,6 +804,11 @@ static const struct mfd_cell axp813_cells[] = { .of_compatible = "x-powers,axp813-ac-power-supply", .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), .resources = axp20x_ac_power_supply_resources, + }, { + .name = "axp20x-usb-power-supply", + .num_resources = ARRAY_SIZE(axp803_usb_power_supply_resources), + .resources = axp803_usb_power_supply_resources, + .of_compatible = "x-powers,axp813-usb-power-supply", }, }; diff --git a/drivers/mfd/cros_ec.c b/drivers/mfd/cros_ec.c index 6acfe036d522..bd2bcdd4718b 100644 --- a/drivers/mfd/cros_ec.c +++ b/drivers/mfd/cros_ec.c @@ -75,20 +75,49 @@ static irqreturn_t ec_irq_thread(int irq, void *data) static int cros_ec_sleep_event(struct cros_ec_device *ec_dev, u8 sleep_event) { + int ret; struct { struct cros_ec_command msg; - struct ec_params_host_sleep_event req; + union { + struct ec_params_host_sleep_event req0; + struct ec_params_host_sleep_event_v1 req1; + struct ec_response_host_sleep_event_v1 resp1; + } u; } __packed buf; memset(&buf, 0, sizeof(buf)); - buf.req.sleep_event = sleep_event; + if (ec_dev->host_sleep_v1) { + buf.u.req1.sleep_event = sleep_event; + buf.u.req1.suspend_params.sleep_timeout_ms = + EC_HOST_SLEEP_TIMEOUT_DEFAULT; + + buf.msg.outsize = sizeof(buf.u.req1); + if ((sleep_event == HOST_SLEEP_EVENT_S3_RESUME) || + (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME)) + buf.msg.insize = sizeof(buf.u.resp1); + + buf.msg.version = 1; + + } else { + buf.u.req0.sleep_event = sleep_event; + buf.msg.outsize = sizeof(buf.u.req0); + } buf.msg.command = EC_CMD_HOST_SLEEP_EVENT; - buf.msg.version = 0; - buf.msg.outsize = sizeof(buf.req); - return cros_ec_cmd_xfer(ec_dev, &buf.msg); + ret = cros_ec_cmd_xfer(ec_dev, &buf.msg); + + /* For now, report failure to transition to S0ix with a warning. */ + if (ret >= 0 && ec_dev->host_sleep_v1 && + (sleep_event == HOST_SLEEP_EVENT_S0IX_RESUME)) + WARN_ONCE(buf.u.resp1.resume_response.sleep_transitions & + EC_HOST_RESUME_SLEEP_TIMEOUT, + "EC detected sleep transition timeout. Total slp_s0 transitions: %d", + buf.u.resp1.resume_response.sleep_transitions & + EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK); + + return ret; } int cros_ec_register(struct cros_ec_device *ec_dev) diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c index d275deaecb12..54a58df571b6 100644 --- a/drivers/mfd/cros_ec_dev.c +++ b/drivers/mfd/cros_ec_dev.c @@ -385,7 +385,8 @@ static const struct mfd_cell cros_ec_rtc_cells[] = { }; static const struct mfd_cell cros_usbpd_charger_cells[] = { - { .name = "cros-usbpd-charger" } + { .name = "cros-usbpd-charger" }, + { .name = "cros-usbpd-logger" }, }; static const struct mfd_cell cros_ec_platform_cells[] = { @@ -418,6 +419,39 @@ static int ec_device_probe(struct platform_device *pdev) device_initialize(&ec->class_dev); cdev_init(&ec->cdev, &fops); + /* Check whether this is actually a Fingerprint MCU rather than an EC */ + if (cros_ec_check_features(ec, EC_FEATURE_FINGERPRINT)) { + dev_info(dev, "CrOS Fingerprint MCU detected.\n"); + /* + * Help userspace differentiating ECs from FP MCU, + * regardless of the probing order. + */ + ec_platform->ec_name = CROS_EC_DEV_FP_NAME; + } + + /* + * Check whether this is actually an Integrated Sensor Hub (ISH) + * rather than an EC. + */ + if (cros_ec_check_features(ec, EC_FEATURE_ISH)) { + dev_info(dev, "CrOS ISH MCU detected.\n"); + /* + * Help userspace differentiating ECs from ISH MCU, + * regardless of the probing order. + */ + ec_platform->ec_name = CROS_EC_DEV_ISH_NAME; + } + + /* Check whether this is actually a Touchpad MCU rather than an EC */ + if (cros_ec_check_features(ec, EC_FEATURE_TOUCHPAD)) { + dev_info(dev, "CrOS Touchpad MCU detected.\n"); + /* + * Help userspace differentiating ECs from TP MCU, + * regardless of the probing order. + */ + ec_platform->ec_name = CROS_EC_DEV_TP_NAME; + } + /* * Add the class device * Link to the character device for creating the /dev entry diff --git a/drivers/mfd/cs47l35-tables.c b/drivers/mfd/cs47l35-tables.c index 604c9dd14df5..338b825127f1 100644 --- a/drivers/mfd/cs47l35-tables.c +++ b/drivers/mfd/cs47l35-tables.c @@ -178,6 +178,7 @@ static const struct reg_default cs47l35_reg_default[] = { { 0x00000448, 0x0a83 }, /* R1096 (0x448) - eDRE Enable */ { 0x0000044a, 0x0000 }, /* R1098 (0x44a) - eDRE Manual */ { 0x00000450, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 1 */ + { 0x00000451, 0x0000 }, /* R1105 (0x451) - DAC AEC Control 2 */ { 0x00000458, 0x0000 }, /* R1112 (0x458) - Noise Gate Control */ { 0x00000490, 0x0069 }, /* R1168 (0x490) - PDM SPK1 CTRL 1 */ { 0x00000491, 0x0000 }, /* R1169 (0x491) - PDM SPK1 CTRL 2 */ @@ -970,6 +971,7 @@ static bool cs47l35_16bit_readable_register(struct device *dev, case MADERA_EDRE_ENABLE: case MADERA_EDRE_MANUAL: case MADERA_DAC_AEC_CONTROL_1: + case MADERA_DAC_AEC_CONTROL_2: case MADERA_NOISE_GATE_CONTROL: case MADERA_PDM_SPK1_CTRL_1: case MADERA_PDM_SPK1_CTRL_2: diff --git a/drivers/mfd/cs47l90-tables.c b/drivers/mfd/cs47l90-tables.c index 77207d98f0cc..c040d3d7232a 100644 --- a/drivers/mfd/cs47l90-tables.c +++ b/drivers/mfd/cs47l90-tables.c @@ -263,6 +263,7 @@ static const struct reg_default cs47l90_reg_default[] = { { 0x00000440, 0x003f }, /* R1088 (0x440) - DRE Enable */ { 0x00000448, 0x003f }, /* R1096 (0x448) - eDRE Enable */ { 0x00000450, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 1 */ + { 0x00000451, 0x0000 }, /* R1104 (0x450) - DAC AEC Control 2 */ { 0x00000458, 0x0000 }, /* R1112 (0x458) - Noise Gate Control */ { 0x00000490, 0x0069 }, /* R1168 (0x490) - PDM SPK1 CTRL 1 */ { 0x00000491, 0x0000 }, /* R1169 (0x491) - PDM SPK1 CTRL 2 */ @@ -1692,6 +1693,7 @@ static bool cs47l90_16bit_readable_register(struct device *dev, case MADERA_DRE_ENABLE: case MADERA_EDRE_ENABLE: case MADERA_DAC_AEC_CONTROL_1: + case MADERA_DAC_AEC_CONTROL_2: case MADERA_NOISE_GATE_CONTROL: case MADERA_PDM_SPK1_CTRL_1: case MADERA_PDM_SPK1_CTRL_2: diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c index 6e4ce49b4405..b125f90dd375 100644 --- a/drivers/mfd/da9063-core.c +++ b/drivers/mfd/da9063-core.c @@ -1,5 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ /* - * da9063-core.c: Device access for Dialog DA9063 modules + * Device access for Dialog DA9063 modules * * Copyright 2012 Dialog Semiconductors Ltd. * Copyright 2013 Philipp Zabel, Pengutronix @@ -7,11 +8,6 @@ * Author: Krystian Garbaciak, Dialog Semiconductor * Author: Michal Hajduk, Dialog Semiconductor * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #include <linux/kernel.h> @@ -26,7 +22,6 @@ #include <linux/regmap.h> #include <linux/mfd/da9063/core.h> -#include <linux/mfd/da9063/pdata.h> #include <linux/mfd/da9063/registers.h> #include <linux/proc_fs.h> @@ -165,7 +160,6 @@ static int da9063_clear_fault_log(struct da9063 *da9063) int da9063_device_init(struct da9063 *da9063, unsigned int irq) { - struct da9063_pdata *pdata = da9063->dev->platform_data; int model, variant_id, variant_code; int ret; @@ -173,24 +167,10 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq) if (ret < 0) dev_err(da9063->dev, "Cannot clear fault log\n"); - if (pdata) { - da9063->flags = pdata->flags; - da9063->irq_base = pdata->irq_base; - } else { - da9063->flags = 0; - da9063->irq_base = -1; - } + da9063->flags = 0; + da9063->irq_base = -1; da9063->chip_irq = irq; - if (pdata && pdata->init != NULL) { - ret = pdata->init(da9063); - if (ret != 0) { - dev_err(da9063->dev, - "Platform initialization failed.\n"); - return ret; - } - } - ret = regmap_read(da9063->regmap, DA9063_REG_CHIP_ID, &model); if (ret < 0) { dev_err(da9063->dev, "Cannot read chip model id.\n"); diff --git a/drivers/mfd/da9063-i2c.c b/drivers/mfd/da9063-i2c.c index 50a24b1921d0..455de74c0dd2 100644 --- a/drivers/mfd/da9063-i2c.c +++ b/drivers/mfd/da9063-i2c.c @@ -1,15 +1,10 @@ -/* da9063-i2c.c: Interrupt support for Dialog DA9063 +// SPDX-License-Identifier: GPL-2.0+ +/* I2C support for Dialog DA9063 * * Copyright 2012 Dialog Semiconductor Ltd. * Copyright 2013 Philipp Zabel, Pengutronix * * Author: Krystian Garbaciak, Dialog Semiconductor - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #include <linux/kernel.h> @@ -22,7 +17,6 @@ #include <linux/mfd/core.h> #include <linux/mfd/da9063/core.h> -#include <linux/mfd/da9063/pdata.h> #include <linux/mfd/da9063/registers.h> #include <linux/of.h> diff --git a/drivers/mfd/da9063-irq.c b/drivers/mfd/da9063-irq.c index ecc0c8ce6c58..e2bbedf58e68 100644 --- a/drivers/mfd/da9063-irq.c +++ b/drivers/mfd/da9063-irq.c @@ -1,15 +1,10 @@ -/* da9063-irq.c: Interrupts support for Dialog DA9063 +// SPDX-License-Identifier: GPL-2.0+ +/* Interrupt support for Dialog DA9063 * * Copyright 2012 Dialog Semiconductor Ltd. * Copyright 2013 Philipp Zabel, Pengutronix * * Author: Michal Hajduk, Dialog Semiconductor - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * */ #include <linux/kernel.h> @@ -19,7 +14,6 @@ #include <linux/interrupt.h> #include <linux/regmap.h> #include <linux/mfd/da9063/core.h> -#include <linux/mfd/da9063/pdata.h> #define DA9063_REG_EVENT_A_OFFSET 0 #define DA9063_REG_EVENT_B_OFFSET 1 diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index cba2eb166650..6b111be944d9 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -129,6 +129,19 @@ static const struct intel_lpss_platform_info cnl_i2c_info = { }; static const struct pci_device_id intel_lpss_pci_ids[] = { + /* CML */ + { PCI_VDEVICE(INTEL, 0x02a8), (kernel_ulong_t)&spt_uart_info }, + { PCI_VDEVICE(INTEL, 0x02a9), (kernel_ulong_t)&spt_uart_info }, + { PCI_VDEVICE(INTEL, 0x02aa), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x02ab), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0x02c5), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x02c6), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x02c7), (kernel_ulong_t)&spt_uart_info }, + { PCI_VDEVICE(INTEL, 0x02e8), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x02e9), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x02ea), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x02eb), (kernel_ulong_t)&cnl_i2c_info }, + { PCI_VDEVICE(INTEL, 0x02fb), (kernel_ulong_t)&spt_info }, /* BXT A-Step */ { PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info }, { PCI_VDEVICE(INTEL, 0x0aae), (kernel_ulong_t)&bxt_i2c_info }, diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c index 45221e092ecf..7e425ff53491 100644 --- a/drivers/mfd/intel-lpss.c +++ b/drivers/mfd/intel-lpss.c @@ -273,6 +273,9 @@ static void intel_lpss_init_dev(const struct intel_lpss *lpss) { u32 value = LPSS_PRIV_SSP_REG_DIS_DMA_FIN; + /* Set the device in reset state */ + writel(0, lpss->priv + LPSS_PRIV_RESETS); + intel_lpss_deassert_reset(lpss); intel_lpss_set_remap_addr(lpss); diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c index 5bddb84cfc1f..11adbf77960d 100644 --- a/drivers/mfd/intel_quark_i2c_gpio.c +++ b/drivers/mfd/intel_quark_i2c_gpio.c @@ -74,16 +74,6 @@ static const struct dmi_system_id dmi_platform_info[] = { { .matches = { DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), - DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, - "6ES7647-0AA00-0YA2"), - }, - .driver_data = (void *)400000, - }, - { - .matches = { - DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), - DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, - "6ES7647-0AA00-1YA2"), }, .driver_data = (void *)400000, }, diff --git a/drivers/mfd/intel_soc_pmic_chtwc.c b/drivers/mfd/intel_soc_pmic_chtwc.c index 64a3aece9c5e..be84bb2aa837 100644 --- a/drivers/mfd/intel_soc_pmic_chtwc.c +++ b/drivers/mfd/intel_soc_pmic_chtwc.c @@ -60,6 +60,7 @@ static struct mfd_cell cht_wc_dev[] = { .resources = cht_wc_ext_charger_resources, }, { .name = "cht_wcove_region", }, + { .name = "cht_wcove_leds", }, }; /* diff --git a/drivers/mfd/max77620.c b/drivers/mfd/max77620.c index d8ddd1a6f304..436361ce3737 100644 --- a/drivers/mfd/max77620.c +++ b/drivers/mfd/max77620.c @@ -37,6 +37,8 @@ #include <linux/regmap.h> #include <linux/slab.h> +static struct max77620_chip *max77620_scratch; + static const struct resource gpio_resources[] = { DEFINE_RES_IRQ(MAX77620_IRQ_TOP_GPIO), }; @@ -111,6 +113,26 @@ static const struct mfd_cell max20024_children[] = { }, }; +static const struct mfd_cell max77663_children[] = { + { .name = "max77620-pinctrl", }, + { .name = "max77620-clock", }, + { .name = "max77663-pmic", }, + { .name = "max77620-watchdog", }, + { + .name = "max77620-gpio", + .resources = gpio_resources, + .num_resources = ARRAY_SIZE(gpio_resources), + }, { + .name = "max77620-rtc", + .resources = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), + }, { + .name = "max77663-power", + .resources = power_resources, + .num_resources = ARRAY_SIZE(power_resources), + }, +}; + static const struct regmap_range max77620_readable_ranges[] = { regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_DVSSD4), }; @@ -171,6 +193,35 @@ static const struct regmap_config max20024_regmap_config = { .volatile_table = &max77620_volatile_table, }; +static const struct regmap_range max77663_readable_ranges[] = { + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5), +}; + +static const struct regmap_access_table max77663_readable_table = { + .yes_ranges = max77663_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(max77663_readable_ranges), +}; + +static const struct regmap_range max77663_writable_ranges[] = { + regmap_reg_range(MAX77620_REG_CNFGGLBL1, MAX77620_REG_CID5), +}; + +static const struct regmap_access_table max77663_writable_table = { + .yes_ranges = max77663_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(max77663_writable_ranges), +}; + +static const struct regmap_config max77663_regmap_config = { + .name = "power-slave", + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77620_REG_CID5 + 1, + .cache_type = REGCACHE_RBTREE, + .rd_table = &max77663_readable_table, + .wr_table = &max77663_writable_table, + .volatile_table = &max77620_volatile_table, +}; + /* * MAX77620 and MAX20024 has the following steps of the interrupt handling * for TOP interrupts: @@ -240,6 +291,9 @@ static int max77620_get_fps_period_reg_value(struct max77620_chip *chip, case MAX77620: fps_min_period = MAX77620_FPS_PERIOD_MIN_US; break; + case MAX77663: + fps_min_period = MAX20024_FPS_PERIOD_MIN_US; + break; default: return -EINVAL; } @@ -274,6 +328,9 @@ static int max77620_config_fps(struct max77620_chip *chip, case MAX77620: fps_max_period = MAX77620_FPS_PERIOD_MAX_US; break; + case MAX77663: + fps_max_period = MAX20024_FPS_PERIOD_MAX_US; + break; default: return -EINVAL; } @@ -375,6 +432,9 @@ static int max77620_initialise_fps(struct max77620_chip *chip) } skip_fps: + if (chip->chip_id == MAX77663) + return 0; + /* Enable wake on EN0 pin */ ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, MAX77620_ONOFFCNFG2_WK_EN0, @@ -423,6 +483,15 @@ static int max77620_read_es_version(struct max77620_chip *chip) return ret; } +static void max77620_pm_power_off(void) +{ + struct max77620_chip *chip = max77620_scratch; + + regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG1, + MAX77620_ONOFFCNFG1_SFT_RST, + MAX77620_ONOFFCNFG1_SFT_RST); +} + static int max77620_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -430,6 +499,7 @@ static int max77620_probe(struct i2c_client *client, struct max77620_chip *chip; const struct mfd_cell *mfd_cells; int n_mfd_cells; + bool pm_off; int ret; chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); @@ -453,6 +523,11 @@ static int max77620_probe(struct i2c_client *client, n_mfd_cells = ARRAY_SIZE(max20024_children); rmap_config = &max20024_regmap_config; break; + case MAX77663: + mfd_cells = max77663_children; + n_mfd_cells = ARRAY_SIZE(max77663_children); + rmap_config = &max77663_regmap_config; + break; default: dev_err(chip->dev, "ChipID is invalid %d\n", chip->chip_id); return -EINVAL; @@ -491,6 +566,12 @@ static int max77620_probe(struct i2c_client *client, return ret; } + pm_off = of_device_is_system_power_controller(client->dev.of_node); + if (pm_off && !pm_power_off) { + max77620_scratch = chip; + pm_power_off = max77620_pm_power_off; + } + return 0; } @@ -546,6 +627,9 @@ static int max77620_i2c_suspend(struct device *dev) return ret; } + if (chip->chip_id == MAX77663) + goto out; + /* Disable WK_EN0 */ ret = regmap_update_bits(chip->rmap, MAX77620_REG_ONOFFCNFG2, MAX77620_ONOFFCNFG2_WK_EN0, 0); @@ -581,7 +665,7 @@ static int max77620_i2c_resume(struct device *dev) * For MAX20024: No need to configure WKEN0 on resume as * it is configured on Init. */ - if (chip->chip_id == MAX20024) + if (chip->chip_id == MAX20024 || chip->chip_id == MAX77663) goto out; /* Enable WK_EN0 */ @@ -603,6 +687,7 @@ out: static const struct i2c_device_id max77620_id[] = { {"max77620", MAX77620}, {"max20024", MAX20024}, + {"max77663", MAX77663}, {}, }; diff --git a/drivers/mfd/max77650.c b/drivers/mfd/max77650.c new file mode 100644 index 000000000000..60e07aca6ae5 --- /dev/null +++ b/drivers/mfd/max77650.c @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (C) 2018 BayLibre SAS +// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com> +// +// Core MFD driver for MAXIM 77650/77651 charger/power-supply. +// Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf + +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/max77650.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#define MAX77650_INT_GPI_F_MSK BIT(0) +#define MAX77650_INT_GPI_R_MSK BIT(1) +#define MAX77650_INT_GPI_MSK \ + (MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK) +#define MAX77650_INT_nEN_F_MSK BIT(2) +#define MAX77650_INT_nEN_R_MSK BIT(3) +#define MAX77650_INT_TJAL1_R_MSK BIT(4) +#define MAX77650_INT_TJAL2_R_MSK BIT(5) +#define MAX77650_INT_DOD_R_MSK BIT(6) + +#define MAX77650_INT_THM_MSK BIT(0) +#define MAX77650_INT_CHG_MSK BIT(1) +#define MAX77650_INT_CHGIN_MSK BIT(2) +#define MAX77650_INT_TJ_REG_MSK BIT(3) +#define MAX77650_INT_CHGIN_CTRL_MSK BIT(4) +#define MAX77650_INT_SYS_CTRL_MSK BIT(5) +#define MAX77650_INT_SYS_CNFG_MSK BIT(6) + +#define MAX77650_INT_GLBL_OFFSET 0 +#define MAX77650_INT_CHG_OFFSET 1 + +#define MAX77650_SBIA_LPM_MASK BIT(5) +#define MAX77650_SBIA_LPM_DISABLED 0x00 + +enum { + MAX77650_INT_GPI, + MAX77650_INT_nEN_F, + MAX77650_INT_nEN_R, + MAX77650_INT_TJAL1_R, + MAX77650_INT_TJAL2_R, + MAX77650_INT_DOD_R, + MAX77650_INT_THM, + MAX77650_INT_CHG, + MAX77650_INT_CHGIN, + MAX77650_INT_TJ_REG, + MAX77650_INT_CHGIN_CTRL, + MAX77650_INT_SYS_CTRL, + MAX77650_INT_SYS_CNFG, +}; + +static const struct resource max77650_charger_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"), + DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"), +}; + +static const struct resource max77650_gpio_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"), +}; + +static const struct resource max77650_onkey_resources[] = { + DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"), + DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"), +}; + +static const struct mfd_cell max77650_cells[] = { + { + .name = "max77650-regulator", + .of_compatible = "maxim,max77650-regulator", + }, { + .name = "max77650-charger", + .of_compatible = "maxim,max77650-charger", + .resources = max77650_charger_resources, + .num_resources = ARRAY_SIZE(max77650_charger_resources), + }, { + .name = "max77650-gpio", + .of_compatible = "maxim,max77650-gpio", + .resources = max77650_gpio_resources, + .num_resources = ARRAY_SIZE(max77650_gpio_resources), + }, { + .name = "max77650-led", + .of_compatible = "maxim,max77650-led", + }, { + .name = "max77650-onkey", + .of_compatible = "maxim,max77650-onkey", + .resources = max77650_onkey_resources, + .num_resources = ARRAY_SIZE(max77650_onkey_resources), + }, +}; + +static const struct regmap_irq max77650_irqs[] = { + [MAX77650_INT_GPI] = { + .reg_offset = MAX77650_INT_GLBL_OFFSET, + .mask = MAX77650_INT_GPI_MSK, + .type = { + .type_falling_val = MAX77650_INT_GPI_F_MSK, + .type_rising_val = MAX77650_INT_GPI_R_MSK, + .types_supported = IRQ_TYPE_EDGE_BOTH, + }, + }, + REGMAP_IRQ_REG(MAX77650_INT_nEN_F, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK), + REGMAP_IRQ_REG(MAX77650_INT_nEN_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_DOD_R, + MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK), + REGMAP_IRQ_REG(MAX77650_INT_THM, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHGIN, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK), + REGMAP_IRQ_REG(MAX77650_INT_TJ_REG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK), + REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK), + REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK), + REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG, + MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK), +}; + +static const struct regmap_irq_chip max77650_irq_chip = { + .name = "max77650-irq", + .irqs = max77650_irqs, + .num_irqs = ARRAY_SIZE(max77650_irqs), + .num_regs = 2, + .status_base = MAX77650_REG_INT_GLBL, + .mask_base = MAX77650_REG_INTM_GLBL, + .type_in_mask = true, + .type_invert = true, + .init_ack_masked = true, + .clear_on_unmask = true, +}; + +static const struct regmap_config max77650_regmap_config = { + .name = "max77650", + .reg_bits = 8, + .val_bits = 8, +}; + +static int max77650_i2c_probe(struct i2c_client *i2c) +{ + struct regmap_irq_chip_data *irq_data; + struct device *dev = &i2c->dev; + struct irq_domain *domain; + struct regmap *map; + unsigned int val; + int rv, id; + + map = devm_regmap_init_i2c(i2c, &max77650_regmap_config); + if (IS_ERR(map)) { + dev_err(dev, "Unable to initialise I2C Regmap\n"); + return PTR_ERR(map); + } + + rv = regmap_read(map, MAX77650_REG_CID, &val); + if (rv) { + dev_err(dev, "Unable to read Chip ID\n"); + return rv; + } + + id = MAX77650_CID_BITS(val); + switch (id) { + case MAX77650_CID_77650A: + case MAX77650_CID_77650C: + case MAX77650_CID_77651A: + case MAX77650_CID_77651B: + break; + default: + dev_err(dev, "Chip not supported - ID: 0x%02x\n", id); + return -ENODEV; + } + + /* + * This IC has a low-power mode which reduces the quiescent current + * consumption to ~5.6uA but is only suitable for systems consuming + * less than ~2mA. Since this is not likely the case even on + * linux-based wearables - keep the chip in normal power mode. + */ + rv = regmap_update_bits(map, + MAX77650_REG_CNFG_GLBL, + MAX77650_SBIA_LPM_MASK, + MAX77650_SBIA_LPM_DISABLED); + if (rv) { + dev_err(dev, "Unable to change the power mode\n"); + return rv; + } + + rv = devm_regmap_add_irq_chip(dev, map, i2c->irq, + IRQF_ONESHOT | IRQF_SHARED, 0, + &max77650_irq_chip, &irq_data); + if (rv) { + dev_err(dev, "Unable to add Regmap IRQ chip\n"); + return rv; + } + + domain = regmap_irq_get_domain(irq_data); + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + max77650_cells, ARRAY_SIZE(max77650_cells), + NULL, 0, domain); +} + +static const struct of_device_id max77650_of_match[] = { + { .compatible = "maxim,max77650" }, + { } +}; +MODULE_DEVICE_TABLE(of, max77650_of_match); + +static struct i2c_driver max77650_i2c_driver = { + .driver = { + .name = "max77650", + .of_match_table = of_match_ptr(max77650_of_match), + }, + .probe_new = max77650_i2c_probe, +}; +module_i2c_driver(max77650_i2c_driver); + +MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver"); +MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 94e3f32ce935..1ade4c8cc91f 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -269,6 +269,19 @@ fail_alloc: return ret; } +/** + * mfd_add_devices - register child devices + * + * @parent: Pointer to parent device. + * @id: Can be PLATFORM_DEVID_AUTO to let the Platform API take care + * of device numbering, or will be added to a device's cell_id. + * @cells: Array of (struct mfd_cell)s describing child devices. + * @n_devs: Number of child devices to register. + * @mem_base: Parent register range resource for child devices. + * @irq_base: Base of the range of virtual interrupt numbers allocated for + * this MFD device. Unused if @domain is specified. + * @domain: Interrupt domain to create mappings for hardware interrupts. + */ int mfd_add_devices(struct device *parent, int id, const struct mfd_cell *cells, int n_devs, struct resource *mem_base, diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c index 216fbf6adec9..94377782d208 100644 --- a/drivers/mfd/rk808.c +++ b/drivers/mfd/rk808.c @@ -568,14 +568,6 @@ static int rk808_remove(struct i2c_client *client) return 0; } -static const struct i2c_device_id rk808_ids[] = { - { "rk805" }, - { "rk808" }, - { "rk818" }, - { }, -}; -MODULE_DEVICE_TABLE(i2c, rk808_ids); - static struct i2c_driver rk808_i2c_driver = { .driver = { .name = "rk808", @@ -583,7 +575,6 @@ static struct i2c_driver rk808_i2c_driver = { }, .probe = rk808_probe, .remove = rk808_remove, - .id_table = rk808_ids, }; module_i2c_driver(rk808_i2c_driver); diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 521319086c81..95473ff9bb4b 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -28,45 +28,33 @@ #include <linux/regmap.h> static const struct mfd_cell s5m8751_devs[] = { - { - .name = "s5m8751-pmic", - }, { - .name = "s5m-charger", - }, { - .name = "s5m8751-codec", - }, + { .name = "s5m8751-pmic", }, + { .name = "s5m-charger", }, + { .name = "s5m8751-codec", }, }; static const struct mfd_cell s5m8763_devs[] = { - { - .name = "s5m8763-pmic", - }, { - .name = "s5m-rtc", - }, { - .name = "s5m-charger", - }, + { .name = "s5m8763-pmic", }, + { .name = "s5m-rtc", }, + { .name = "s5m-charger", }, }; static const struct mfd_cell s5m8767_devs[] = { + { .name = "s5m8767-pmic", }, + { .name = "s5m-rtc", }, { - .name = "s5m8767-pmic", - }, { - .name = "s5m-rtc", - }, { .name = "s5m8767-clk", .of_compatible = "samsung,s5m8767-clk", - } + }, }; static const struct mfd_cell s2mps11_devs[] = { + { .name = "s2mps11-regulator", }, + { .name = "s2mps14-rtc", }, { - .name = "s2mps11-regulator", - }, { - .name = "s2mps14-rtc", - }, { .name = "s2mps11-clk", .of_compatible = "samsung,s2mps11-clk", - } + }, }; static const struct mfd_cell s2mps13_devs[] = { @@ -79,37 +67,30 @@ static const struct mfd_cell s2mps13_devs[] = { }; static const struct mfd_cell s2mps14_devs[] = { + { .name = "s2mps14-regulator", }, + { .name = "s2mps14-rtc", }, { - .name = "s2mps14-regulator", - }, { - .name = "s2mps14-rtc", - }, { .name = "s2mps14-clk", .of_compatible = "samsung,s2mps14-clk", - } + }, }; static const struct mfd_cell s2mps15_devs[] = { + { .name = "s2mps15-regulator", }, + { .name = "s2mps15-rtc", }, { - .name = "s2mps15-regulator", - }, { - .name = "s2mps15-rtc", - }, { .name = "s2mps13-clk", .of_compatible = "samsung,s2mps13-clk", }, }; static const struct mfd_cell s2mpa01_devs[] = { - { - .name = "s2mpa01-pmic", - }, + { .name = "s2mpa01-pmic", }, + { .name = "s2mps14-rtc", }, }; static const struct mfd_cell s2mpu02_devs[] = { - { - .name = "s2mpu02-regulator", - }, + { .name = "s2mpu02-regulator", }, }; #ifdef CONFIG_OF diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c index ad0099077e7e..a98c5d165039 100644 --- a/drivers/mfd/sec-irq.c +++ b/drivers/mfd/sec-irq.c @@ -455,6 +455,9 @@ int sec_irq_init(struct sec_pmic_dev *sec_pmic) case S5M8767X: sec_irq_chip = &s5m8767_irq_chip; break; + case S2MPA01: + sec_irq_chip = &s2mps14_irq_chip; + break; case S2MPS11X: sec_irq_chip = &s2mps11_irq_chip; break; diff --git a/drivers/mfd/ssbi.c b/drivers/mfd/ssbi.c index 36b96fee4ce6..0ae27cd30268 100644 --- a/drivers/mfd/ssbi.c +++ b/drivers/mfd/ssbi.c @@ -80,8 +80,6 @@ struct ssbi { int (*write)(struct ssbi *, u16 addr, const u8 *buf, int len); }; -#define to_ssbi(dev) platform_get_drvdata(to_platform_device(dev)) - static inline u32 ssbi_readl(struct ssbi *ssbi, u32 reg) { return readl(ssbi->base + reg); @@ -243,7 +241,7 @@ err: int ssbi_read(struct device *dev, u16 addr, u8 *buf, int len) { - struct ssbi *ssbi = to_ssbi(dev); + struct ssbi *ssbi = dev_get_drvdata(dev); unsigned long flags; int ret; @@ -257,7 +255,7 @@ EXPORT_SYMBOL_GPL(ssbi_read); int ssbi_write(struct device *dev, u16 addr, const u8 *buf, int len) { - struct ssbi *ssbi = to_ssbi(dev); + struct ssbi *ssbi = dev_get_drvdata(dev); unsigned long flags; int ret; diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c new file mode 100644 index 000000000000..fe8efba2d45f --- /dev/null +++ b/drivers/mfd/stmfx.c @@ -0,0 +1,545 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for STMicroelectronics Multi-Function eXpander (STMFX) core + * + * Copyright (C) 2019 STMicroelectronics + * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. + */ +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/stmfx.h> +#include <linux/module.h> +#include <linux/regulator/consumer.h> + +static bool stmfx_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case STMFX_REG_SYS_CTRL: + case STMFX_REG_IRQ_SRC_EN: + case STMFX_REG_IRQ_PENDING: + case STMFX_REG_IRQ_GPI_PENDING1: + case STMFX_REG_IRQ_GPI_PENDING2: + case STMFX_REG_IRQ_GPI_PENDING3: + case STMFX_REG_GPIO_STATE1: + case STMFX_REG_GPIO_STATE2: + case STMFX_REG_GPIO_STATE3: + case STMFX_REG_IRQ_GPI_SRC1: + case STMFX_REG_IRQ_GPI_SRC2: + case STMFX_REG_IRQ_GPI_SRC3: + case STMFX_REG_GPO_SET1: + case STMFX_REG_GPO_SET2: + case STMFX_REG_GPO_SET3: + case STMFX_REG_GPO_CLR1: + case STMFX_REG_GPO_CLR2: + case STMFX_REG_GPO_CLR3: + return true; + default: + return false; + } +} + +static bool stmfx_reg_writeable(struct device *dev, unsigned int reg) +{ + return (reg >= STMFX_REG_SYS_CTRL); +} + +static const struct regmap_config stmfx_regmap_config = { + .reg_bits = 8, + .reg_stride = 1, + .val_bits = 8, + .max_register = STMFX_REG_MAX, + .volatile_reg = stmfx_reg_volatile, + .writeable_reg = stmfx_reg_writeable, + .cache_type = REGCACHE_RBTREE, +}; + +static const struct resource stmfx_pinctrl_resources[] = { + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_GPIO), +}; + +static const struct resource stmfx_idd_resources[] = { + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_IDD), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_ERROR), +}; + +static const struct resource stmfx_ts_resources[] = { + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_DET), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_NE), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_TH), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_FULL), + DEFINE_RES_IRQ(STMFX_REG_IRQ_SRC_EN_TS_OVF), +}; + +static struct mfd_cell stmfx_cells[] = { + { + .of_compatible = "st,stmfx-0300-pinctrl", + .name = "stmfx-pinctrl", + .resources = stmfx_pinctrl_resources, + .num_resources = ARRAY_SIZE(stmfx_pinctrl_resources), + }, + { + .of_compatible = "st,stmfx-0300-idd", + .name = "stmfx-idd", + .resources = stmfx_idd_resources, + .num_resources = ARRAY_SIZE(stmfx_idd_resources), + }, + { + .of_compatible = "st,stmfx-0300-ts", + .name = "stmfx-ts", + .resources = stmfx_ts_resources, + .num_resources = ARRAY_SIZE(stmfx_ts_resources), + }, +}; + +static u8 stmfx_func_to_mask(u32 func) +{ + u8 mask = 0; + + if (func & STMFX_FUNC_GPIO) + mask |= STMFX_REG_SYS_CTRL_GPIO_EN; + + if ((func & STMFX_FUNC_ALTGPIO_LOW) || (func & STMFX_FUNC_ALTGPIO_HIGH)) + mask |= STMFX_REG_SYS_CTRL_ALTGPIO_EN; + + if (func & STMFX_FUNC_TS) + mask |= STMFX_REG_SYS_CTRL_TS_EN; + + if (func & STMFX_FUNC_IDD) + mask |= STMFX_REG_SYS_CTRL_IDD_EN; + + return mask; +} + +int stmfx_function_enable(struct stmfx *stmfx, u32 func) +{ + u32 sys_ctrl; + u8 mask; + int ret; + + ret = regmap_read(stmfx->map, STMFX_REG_SYS_CTRL, &sys_ctrl); + if (ret) + return ret; + + /* + * IDD and TS have priority in STMFX FW, so if IDD and TS are enabled, + * ALTGPIO function is disabled by STMFX FW. If IDD or TS is enabled, + * the number of aGPIO available decreases. To avoid GPIO management + * disturbance, abort IDD or TS function enable in this case. + */ + if (((func & STMFX_FUNC_IDD) || (func & STMFX_FUNC_TS)) && + (sys_ctrl & STMFX_REG_SYS_CTRL_ALTGPIO_EN)) { + dev_err(stmfx->dev, "ALTGPIO function already enabled\n"); + return -EBUSY; + } + + /* If TS is enabled, aGPIO[3:0] cannot be used */ + if ((func & STMFX_FUNC_ALTGPIO_LOW) && + (sys_ctrl & STMFX_REG_SYS_CTRL_TS_EN)) { + dev_err(stmfx->dev, "TS in use, aGPIO[3:0] unavailable\n"); + return -EBUSY; + } + + /* If IDD is enabled, aGPIO[7:4] cannot be used */ + if ((func & STMFX_FUNC_ALTGPIO_HIGH) && + (sys_ctrl & STMFX_REG_SYS_CTRL_IDD_EN)) { + dev_err(stmfx->dev, "IDD in use, aGPIO[7:4] unavailable\n"); + return -EBUSY; + } + + mask = stmfx_func_to_mask(func); + + return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, mask); +} +EXPORT_SYMBOL_GPL(stmfx_function_enable); + +int stmfx_function_disable(struct stmfx *stmfx, u32 func) +{ + u8 mask = stmfx_func_to_mask(func); + + return regmap_update_bits(stmfx->map, STMFX_REG_SYS_CTRL, mask, 0); +} +EXPORT_SYMBOL_GPL(stmfx_function_disable); + +static void stmfx_irq_bus_lock(struct irq_data *data) +{ + struct stmfx *stmfx = irq_data_get_irq_chip_data(data); + + mutex_lock(&stmfx->lock); +} + +static void stmfx_irq_bus_sync_unlock(struct irq_data *data) +{ + struct stmfx *stmfx = irq_data_get_irq_chip_data(data); + + regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, stmfx->irq_src); + + mutex_unlock(&stmfx->lock); +} + +static void stmfx_irq_mask(struct irq_data *data) +{ + struct stmfx *stmfx = irq_data_get_irq_chip_data(data); + + stmfx->irq_src &= ~BIT(data->hwirq % 8); +} + +static void stmfx_irq_unmask(struct irq_data *data) +{ + struct stmfx *stmfx = irq_data_get_irq_chip_data(data); + + stmfx->irq_src |= BIT(data->hwirq % 8); +} + +static struct irq_chip stmfx_irq_chip = { + .name = "stmfx-core", + .irq_bus_lock = stmfx_irq_bus_lock, + .irq_bus_sync_unlock = stmfx_irq_bus_sync_unlock, + .irq_mask = stmfx_irq_mask, + .irq_unmask = stmfx_irq_unmask, +}; + +static irqreturn_t stmfx_irq_handler(int irq, void *data) +{ + struct stmfx *stmfx = data; + unsigned long n, pending; + u32 ack; + int ret; + + ret = regmap_read(stmfx->map, STMFX_REG_IRQ_PENDING, + (u32 *)&pending); + if (ret) + return IRQ_NONE; + + /* + * There is no ACK for GPIO, MFX_REG_IRQ_PENDING_GPIO is a logical OR + * of MFX_REG_IRQ_GPI _PENDING1/_PENDING2/_PENDING3 + */ + ack = pending & ~BIT(STMFX_REG_IRQ_SRC_EN_GPIO); + if (ack) { + ret = regmap_write(stmfx->map, STMFX_REG_IRQ_ACK, ack); + if (ret) + return IRQ_NONE; + } + + for_each_set_bit(n, &pending, STMFX_REG_IRQ_SRC_MAX) + handle_nested_irq(irq_find_mapping(stmfx->irq_domain, n)); + + return IRQ_HANDLED; +} + +static int stmfx_irq_map(struct irq_domain *d, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(virq, d->host_data); + irq_set_chip_and_handler(virq, &stmfx_irq_chip, handle_simple_irq); + irq_set_nested_thread(virq, 1); + irq_set_noprobe(virq); + + return 0; +} + +static void stmfx_irq_unmap(struct irq_domain *d, unsigned int virq) +{ + irq_set_chip_and_handler(virq, NULL, NULL); + irq_set_chip_data(virq, NULL); +} + +static const struct irq_domain_ops stmfx_irq_ops = { + .map = stmfx_irq_map, + .unmap = stmfx_irq_unmap, +}; + +static void stmfx_irq_exit(struct i2c_client *client) +{ + struct stmfx *stmfx = i2c_get_clientdata(client); + int hwirq; + + for (hwirq = 0; hwirq < STMFX_REG_IRQ_SRC_MAX; hwirq++) + irq_dispose_mapping(irq_find_mapping(stmfx->irq_domain, hwirq)); + + irq_domain_remove(stmfx->irq_domain); +} + +static int stmfx_irq_init(struct i2c_client *client) +{ + struct stmfx *stmfx = i2c_get_clientdata(client); + u32 irqoutpin = 0, irqtrigger; + int ret; + + stmfx->irq_domain = irq_domain_add_simple(stmfx->dev->of_node, + STMFX_REG_IRQ_SRC_MAX, 0, + &stmfx_irq_ops, stmfx); + if (!stmfx->irq_domain) { + dev_err(stmfx->dev, "Failed to create IRQ domain\n"); + return -EINVAL; + } + + if (!of_property_read_bool(stmfx->dev->of_node, "drive-open-drain")) + irqoutpin |= STMFX_REG_IRQ_OUT_PIN_TYPE; + + irqtrigger = irq_get_trigger_type(client->irq); + if ((irqtrigger & IRQ_TYPE_EDGE_RISING) || + (irqtrigger & IRQ_TYPE_LEVEL_HIGH)) + irqoutpin |= STMFX_REG_IRQ_OUT_PIN_POL; + + ret = regmap_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, irqoutpin); + if (ret) + return ret; + + ret = devm_request_threaded_irq(stmfx->dev, client->irq, + NULL, stmfx_irq_handler, + irqtrigger | IRQF_ONESHOT, + "stmfx", stmfx); + if (ret) + stmfx_irq_exit(client); + + return ret; +} + +static int stmfx_chip_reset(struct stmfx *stmfx) +{ + int ret; + + ret = regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, + STMFX_REG_SYS_CTRL_SWRST); + if (ret) + return ret; + + msleep(STMFX_BOOT_TIME_MS); + + return ret; +} + +static int stmfx_chip_init(struct i2c_client *client) +{ + struct stmfx *stmfx = i2c_get_clientdata(client); + u32 id; + u8 version[2]; + int ret; + + stmfx->vdd = devm_regulator_get_optional(&client->dev, "vdd"); + ret = PTR_ERR_OR_ZERO(stmfx->vdd); + if (ret == -ENODEV) { + stmfx->vdd = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else if (ret) { + dev_err(&client->dev, "Failed to get VDD regulator: %d\n", ret); + return ret; + } + + if (stmfx->vdd) { + ret = regulator_enable(stmfx->vdd); + if (ret) { + dev_err(&client->dev, "VDD enable failed: %d\n", ret); + return ret; + } + } + + ret = regmap_read(stmfx->map, STMFX_REG_CHIP_ID, &id); + if (ret) { + dev_err(&client->dev, "Error reading chip ID: %d\n", ret); + goto err; + } + + /* + * Check that ID is the complement of the I2C address: + * STMFX I2C address follows the 7-bit format (MSB), that's why + * client->addr is shifted. + * + * STMFX_I2C_ADDR| STMFX | Linux + * input pin | I2C device address | I2C device address + *--------------------------------------------------------- + * 0 | b: 1000 010x h:0x84 | 0x42 + * 1 | b: 1000 011x h:0x86 | 0x43 + */ + if (FIELD_GET(STMFX_REG_CHIP_ID_MASK, ~id) != (client->addr << 1)) { + dev_err(&client->dev, "Unknown chip ID: %#x\n", id); + ret = -EINVAL; + goto err; + } + + ret = regmap_bulk_read(stmfx->map, STMFX_REG_FW_VERSION_MSB, + version, ARRAY_SIZE(version)); + if (ret) { + dev_err(&client->dev, "Error reading FW version: %d\n", ret); + goto err; + } + + dev_info(&client->dev, "STMFX id: %#x, fw version: %x.%02x\n", + id, version[0], version[1]); + + ret = stmfx_chip_reset(stmfx); + if (ret) { + dev_err(&client->dev, "Failed to reset chip: %d\n", ret); + goto err; + } + + return 0; + +err: + if (stmfx->vdd) + return regulator_disable(stmfx->vdd); + + return ret; +} + +static int stmfx_chip_exit(struct i2c_client *client) +{ + struct stmfx *stmfx = i2c_get_clientdata(client); + + regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, 0); + regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, 0); + + if (stmfx->vdd) + return regulator_disable(stmfx->vdd); + + return 0; +} + +static int stmfx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct stmfx *stmfx; + int ret; + + stmfx = devm_kzalloc(dev, sizeof(*stmfx), GFP_KERNEL); + if (!stmfx) + return -ENOMEM; + + i2c_set_clientdata(client, stmfx); + + stmfx->dev = dev; + + stmfx->map = devm_regmap_init_i2c(client, &stmfx_regmap_config); + if (IS_ERR(stmfx->map)) { + ret = PTR_ERR(stmfx->map); + dev_err(dev, "Failed to allocate register map: %d\n", ret); + return ret; + } + + mutex_init(&stmfx->lock); + + ret = stmfx_chip_init(client); + if (ret) { + if (ret == -ETIMEDOUT) + return -EPROBE_DEFER; + return ret; + } + + if (client->irq < 0) { + dev_err(dev, "Failed to get IRQ: %d\n", client->irq); + ret = client->irq; + goto err_chip_exit; + } + + ret = stmfx_irq_init(client); + if (ret) + goto err_chip_exit; + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + stmfx_cells, ARRAY_SIZE(stmfx_cells), NULL, + 0, stmfx->irq_domain); + if (ret) + goto err_irq_exit; + + return 0; + +err_irq_exit: + stmfx_irq_exit(client); +err_chip_exit: + stmfx_chip_exit(client); + + return ret; +} + +static int stmfx_remove(struct i2c_client *client) +{ + stmfx_irq_exit(client); + + return stmfx_chip_exit(client); +} + +#ifdef CONFIG_PM_SLEEP +static int stmfx_suspend(struct device *dev) +{ + struct stmfx *stmfx = dev_get_drvdata(dev); + int ret; + + ret = regmap_raw_read(stmfx->map, STMFX_REG_SYS_CTRL, + &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl)); + if (ret) + return ret; + + ret = regmap_raw_read(stmfx->map, STMFX_REG_IRQ_OUT_PIN, + &stmfx->bkp_irqoutpin, + sizeof(stmfx->bkp_irqoutpin)); + if (ret) + return ret; + + if (stmfx->vdd) + return regulator_disable(stmfx->vdd); + + return 0; +} + +static int stmfx_resume(struct device *dev) +{ + struct stmfx *stmfx = dev_get_drvdata(dev); + int ret; + + if (stmfx->vdd) { + ret = regulator_enable(stmfx->vdd); + if (ret) { + dev_err(stmfx->dev, + "VDD enable failed: %d\n", ret); + return ret; + } + } + + ret = regmap_raw_write(stmfx->map, STMFX_REG_SYS_CTRL, + &stmfx->bkp_sysctrl, sizeof(stmfx->bkp_sysctrl)); + if (ret) + return ret; + + ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_OUT_PIN, + &stmfx->bkp_irqoutpin, + sizeof(stmfx->bkp_irqoutpin)); + if (ret) + return ret; + + ret = regmap_raw_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, + &stmfx->irq_src, sizeof(stmfx->irq_src)); + if (ret) + return ret; + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(stmfx_dev_pm_ops, stmfx_suspend, stmfx_resume); + +static const struct of_device_id stmfx_of_match[] = { + { .compatible = "st,stmfx-0300", }, + {}, +}; +MODULE_DEVICE_TABLE(of, stmfx_of_match); + +static struct i2c_driver stmfx_driver = { + .driver = { + .name = "stmfx-core", + .of_match_table = of_match_ptr(stmfx_of_match), + .pm = &stmfx_dev_pm_ops, + }, + .probe = stmfx_probe, + .remove = stmfx_remove, +}; +module_i2c_driver(stmfx_driver); + +MODULE_DESCRIPTION("STMFX core driver"); +MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c index 2b658bed47db..2f12a415b807 100644 --- a/drivers/mfd/sun6i-prcm.c +++ b/drivers/mfd/sun6i-prcm.c @@ -148,13 +148,12 @@ static const struct of_device_id sun6i_prcm_dt_ids[] = { static int sun6i_prcm_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; const struct of_device_id *match; const struct prcm_data *data; struct resource *res; int ret; - match = of_match_node(sun6i_prcm_dt_ids, np); + match = of_match_node(sun6i_prcm_dt_ids, pdev->dev.of_node); if (!match) return -EINVAL; diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index 0ecdffb3d967..f6922a0f8058 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -12,6 +12,7 @@ * (at your option) any later version. */ +#include <linux/clk.h> #include <linux/err.h> #include <linux/hwspinlock.h> #include <linux/io.h> @@ -45,6 +46,7 @@ static const struct regmap_config syscon_regmap_config = { static struct syscon *of_syscon_register(struct device_node *np) { + struct clk *clk; struct syscon *syscon; struct regmap *regmap; void __iomem *base; @@ -119,6 +121,18 @@ static struct syscon *of_syscon_register(struct device_node *np) goto err_regmap; } + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + /* clock is optional */ + if (ret != -ENOENT) + goto err_clk; + } else { + ret = regmap_mmio_attach_clk(regmap, clk); + if (ret) + goto err_attach; + } + syscon->regmap = regmap; syscon->np = np; @@ -128,6 +142,11 @@ static struct syscon *of_syscon_register(struct device_node *np) return syscon; +err_attach: + if (!IS_ERR(clk)) + clk_put(clk); +err_clk: + regmap_exit(regmap); err_regmap: iounmap(base); err_map: diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 43d8683266de..e9cfb147345e 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -82,8 +82,7 @@ struct t7l66xb { static int t7l66xb_mmc_enable(struct platform_device *mmc) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct t7l66xb *t7l66xb = platform_get_drvdata(dev); + struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent); unsigned long flags; u8 dev_ctl; int ret; @@ -108,8 +107,7 @@ static int t7l66xb_mmc_enable(struct platform_device *mmc) static int t7l66xb_mmc_disable(struct platform_device *mmc) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct t7l66xb *t7l66xb = platform_get_drvdata(dev); + struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent); unsigned long flags; u8 dev_ctl; @@ -128,16 +126,14 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc) static void t7l66xb_mmc_pwr(struct platform_device *mmc, int state) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct t7l66xb *t7l66xb = platform_get_drvdata(dev); + struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent); tmio_core_mmc_pwr(t7l66xb->scr + 0x200, 0, state); } static void t7l66xb_mmc_clk_div(struct platform_device *mmc, int state) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct t7l66xb *t7l66xb = platform_get_drvdata(dev); + struct t7l66xb *t7l66xb = dev_get_drvdata(mmc->dev.parent); tmio_core_mmc_clk_div(t7l66xb->scr + 0x200, 0, state); } diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index 85fab3729102..f417c6fecfe2 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -80,16 +80,14 @@ static int tc6387xb_resume(struct platform_device *dev) static void tc6387xb_mmc_pwr(struct platform_device *mmc, int state) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6387xb *tc6387xb = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent); tmio_core_mmc_pwr(tc6387xb->scr + 0x200, 0, state); } static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6387xb *tc6387xb = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent); tmio_core_mmc_clk_div(tc6387xb->scr + 0x200, 0, state); } @@ -97,8 +95,7 @@ static void tc6387xb_mmc_clk_div(struct platform_device *mmc, int state) static int tc6387xb_mmc_enable(struct platform_device *mmc) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6387xb *tc6387xb = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent); clk_prepare_enable(tc6387xb->clk32k); @@ -110,8 +107,7 @@ static int tc6387xb_mmc_enable(struct platform_device *mmc) static int tc6387xb_mmc_disable(struct platform_device *mmc) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6387xb *tc6387xb = platform_get_drvdata(dev); + struct tc6387xb *tc6387xb = dev_get_drvdata(mmc->dev.parent); clk_disable_unprepare(tc6387xb->clk32k); diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 0c9f0390e891..6943048a64c2 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -122,14 +122,13 @@ enum { static int tc6393xb_nand_enable(struct platform_device *nand) { - struct platform_device *dev = to_platform_device(nand->dev.parent); - struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb *tc6393xb = dev_get_drvdata(nand->dev.parent); unsigned long flags; raw_spin_lock_irqsave(&tc6393xb->lock, flags); /* SMD buffer on */ - dev_dbg(&dev->dev, "SMD buffer on\n"); + dev_dbg(nand->dev.parent, "SMD buffer on\n"); tmio_iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1)); raw_spin_unlock_irqrestore(&tc6393xb->lock, flags); @@ -312,8 +311,7 @@ static int tc6393xb_fb_disable(struct platform_device *dev) int tc6393xb_lcd_set_power(struct platform_device *fb, bool on) { - struct platform_device *dev = to_platform_device(fb->dev.parent); - struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb *tc6393xb = dev_get_drvdata(fb->dev.parent); u8 fer; unsigned long flags; @@ -334,8 +332,7 @@ EXPORT_SYMBOL(tc6393xb_lcd_set_power); int tc6393xb_lcd_mode(struct platform_device *fb, const struct fb_videomode *mode) { - struct platform_device *dev = to_platform_device(fb->dev.parent); - struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb *tc6393xb = dev_get_drvdata(fb->dev.parent); unsigned long flags; raw_spin_lock_irqsave(&tc6393xb->lock, flags); @@ -351,8 +348,7 @@ EXPORT_SYMBOL(tc6393xb_lcd_mode); static int tc6393xb_mmc_enable(struct platform_device *mmc) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent); tmio_core_mmc_enable(tc6393xb->scr + 0x200, 0, tc6393xb_mmc_resources[0].start & 0xfffe); @@ -362,8 +358,7 @@ static int tc6393xb_mmc_enable(struct platform_device *mmc) static int tc6393xb_mmc_resume(struct platform_device *mmc) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent); tmio_core_mmc_resume(tc6393xb->scr + 0x200, 0, tc6393xb_mmc_resources[0].start & 0xfffe); @@ -373,16 +368,14 @@ static int tc6393xb_mmc_resume(struct platform_device *mmc) static void tc6393xb_mmc_pwr(struct platform_device *mmc, int state) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent); tmio_core_mmc_pwr(tc6393xb->scr + 0x200, 0, state); } static void tc6393xb_mmc_clk_div(struct platform_device *mmc, int state) { - struct platform_device *dev = to_platform_device(mmc->dev.parent); - struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + struct tc6393xb *tc6393xb = dev_get_drvdata(mmc->dev.parent); tmio_core_mmc_clk_div(tc6393xb->scr + 0x200, 0, state); } diff --git a/drivers/mfd/tps65912-spi.c b/drivers/mfd/tps65912-spi.c index 3bd75061f777..f78be039e463 100644 --- a/drivers/mfd/tps65912-spi.c +++ b/drivers/mfd/tps65912-spi.c @@ -27,6 +27,7 @@ static const struct of_device_id tps65912_spi_of_match_table[] = { { .compatible = "ti,tps65912", }, { /* sentinel */ } }; +MODULE_DEVICE_TABLE(of, tps65912_spi_of_match_table); static int tps65912_spi_probe(struct spi_device *spi) { diff --git a/drivers/mfd/twl6040.c b/drivers/mfd/twl6040.c index 7c3c5fd5fcd0..86052c5c6069 100644 --- a/drivers/mfd/twl6040.c +++ b/drivers/mfd/twl6040.c @@ -322,8 +322,19 @@ int twl6040_power(struct twl6040 *twl6040, int on) } } + /* + * Register access can produce errors after power-up unless we + * wait at least 8ms based on measurements on duovero. + */ + usleep_range(10000, 12000); + /* Sync with the HW */ - regcache_sync(twl6040->regmap); + ret = regcache_sync(twl6040->regmap); + if (ret) { + dev_err(twl6040->dev, "Failed to sync with the HW: %i\n", + ret); + goto out; + } /* Default PLL configuration after power up */ twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL; |