diff options
Diffstat (limited to 'drivers/infiniband')
22 files changed, 37 insertions, 37 deletions
diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index 477418b37786..a83f9eb86bfe 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -8,7 +8,7 @@ menuconfig INFINIBAND depends on !ALPHA select IRQ_POLL select DIMLIB - ---help--- + help Core support for InfiniBand (IB). Make sure to also select any protocols you wish to use as well as drivers for your InfiniBand hardware. @@ -18,7 +18,7 @@ if INFINIBAND config INFINIBAND_USER_MAD tristate "InfiniBand userspace MAD support" depends on INFINIBAND - ---help--- + help Userspace InfiniBand Management Datagram (MAD) support. This is the kernel side of the userspace MAD support, which allows userspace processes to send and receive MADs. You will also @@ -28,7 +28,7 @@ config INFINIBAND_USER_MAD config INFINIBAND_USER_ACCESS tristate "InfiniBand userspace access (verbs and CM)" depends on MMU - ---help--- + help Userspace InfiniBand access support. This enables the kernel side of userspace verbs and the userspace communication manager (CM). This allows userspace processes @@ -40,7 +40,7 @@ config INFINIBAND_USER_ACCESS config INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI bool "Allow experimental legacy verbs in new ioctl uAPI (EXPERIMENTAL)" depends on INFINIBAND_USER_ACCESS - ---help--- + help IOCTL based uAPI support for Infiniband is enabled by default for new verbs only. This allows userspace to invoke the IOCTL based uAPI for current legacy verbs too. @@ -57,7 +57,7 @@ config INFINIBAND_ON_DEMAND_PAGING select MMU_NOTIFIER select INTERVAL_TREE default y - ---help--- + help On demand paging support for the InfiniBand subsystem. Together with driver support this allows registration of memory regions without pinning their pages, fetching the @@ -67,7 +67,7 @@ config INFINIBAND_ADDR_TRANS bool "RDMA/CM" depends on INFINIBAND default y - ---help--- + help Support for RDMA communication manager (CM). This allows for a generic connection abstraction over RDMA. @@ -75,7 +75,7 @@ config INFINIBAND_ADDR_TRANS_CONFIGFS bool depends on INFINIBAND_ADDR_TRANS && CONFIGFS_FS && !(INFINIBAND=y && CONFIGFS_FS=m) default y - ---help--- + help ConfigFS support for RDMA communication manager (CM). This allows the user to config the default GID type that the CM uses for each device, when initiaing new connections. diff --git a/drivers/infiniband/hw/bnxt_re/Kconfig b/drivers/infiniband/hw/bnxt_re/Kconfig index b83f1cc38c52..0feac5132ce1 100644 --- a/drivers/infiniband/hw/bnxt_re/Kconfig +++ b/drivers/infiniband/hw/bnxt_re/Kconfig @@ -5,7 +5,7 @@ config INFINIBAND_BNXT_RE depends on ETHERNET && NETDEVICES && PCI && INET && DCB select NET_VENDOR_BROADCOM select BNXT - ---help--- + help This driver supports Broadcom NetXtreme-E 10/25/40/50 gigabit RoCE HCAs. To compile this driver as a module, choose M here: the module will be called bnxt_re. diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig index b49e8d4c3854..9e2b2c348afd 100644 --- a/drivers/infiniband/hw/cxgb4/Kconfig +++ b/drivers/infiniband/hw/cxgb4/Kconfig @@ -5,7 +5,7 @@ config INFINIBAND_CXGB4 depends on INFINIBAND_ADDR_TRANS select CHELSIO_LIB select GENERIC_ALLOCATOR - ---help--- + help This is an iWARP/RDMA driver for the Chelsio T4 and T5 1GbE, 10GbE adapters and T5 40GbE adapter. diff --git a/drivers/infiniband/hw/hfi1/Kconfig b/drivers/infiniband/hw/hfi1/Kconfig index 0653f4f7b26c..519866b30a13 100644 --- a/drivers/infiniband/hw/hfi1/Kconfig +++ b/drivers/infiniband/hw/hfi1/Kconfig @@ -5,19 +5,19 @@ config INFINIBAND_HFI1 select MMU_NOTIFIER select CRC32 select I2C_ALGOBIT - ---help--- + help This is a low-level driver for Intel OPA Gen1 adapter. config HFI1_DEBUG_SDMA_ORDER bool "HFI1 SDMA Order debug" depends on INFINIBAND_HFI1 default n - ---help--- + help This is a debug flag to test for out of order sdma completions for unit testing config SDMA_VERBOSITY bool "Config SDMA Verbosity" depends on INFINIBAND_HFI1 default n - ---help--- + help This is a configuration flag to enable verbose SDMA debug diff --git a/drivers/infiniband/hw/hns/Kconfig b/drivers/infiniband/hw/hns/Kconfig index 4921c1e40ccd..18d10ebf900b 100644 --- a/drivers/infiniband/hw/hns/Kconfig +++ b/drivers/infiniband/hw/hns/Kconfig @@ -4,7 +4,7 @@ config INFINIBAND_HNS depends on NET_VENDOR_HISILICON depends on ARM64 || (COMPILE_TEST && 64BIT) depends on (HNS_DSAF && HNS_ENET) || HNS3 - ---help--- + help This is a RoCE/RDMA driver for the Hisilicon RoCE engine. The engine is used in Hisilicon Hip06 and more further ICT SoC based on platform device. @@ -15,7 +15,7 @@ config INFINIBAND_HNS_HIP06 bool "Hisilicon Hip06 Family RoCE support" depends on INFINIBAND_HNS && HNS && HNS_DSAF && HNS_ENET depends on INFINIBAND_HNS=m || (HNS_DSAF=y && HNS_ENET=y) - ---help--- + help RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip06 and Hip07 SoC. These RoCE engines are platform devices. @@ -26,7 +26,7 @@ config INFINIBAND_HNS_HIP08 bool "Hisilicon Hip08 Family RoCE support" depends on INFINIBAND_HNS && PCI && HNS3 depends on INFINIBAND_HNS=m || HNS3=y - ---help--- + help RoCE driver support for Hisilicon RoCE engine in Hisilicon Hip08 SoC. The RoCE engine is a PCI device. diff --git a/drivers/infiniband/hw/i40iw/Kconfig b/drivers/infiniband/hw/i40iw/Kconfig index e4b45f4cd8f8..7476f3b14c39 100644 --- a/drivers/infiniband/hw/i40iw/Kconfig +++ b/drivers/infiniband/hw/i40iw/Kconfig @@ -5,5 +5,5 @@ config INFINIBAND_I40IW depends on IPV6 || !IPV6 depends on PCI select GENERIC_ALLOCATOR - ---help--- + help Intel(R) Ethernet X722 iWARP Driver diff --git a/drivers/infiniband/hw/mlx4/Kconfig b/drivers/infiniband/hw/mlx4/Kconfig index cc7c42fe6499..f30ce9dd080a 100644 --- a/drivers/infiniband/hw/mlx4/Kconfig +++ b/drivers/infiniband/hw/mlx4/Kconfig @@ -4,7 +4,7 @@ config MLX4_INFINIBAND depends on NETDEVICES && ETHERNET && PCI && INET select NET_VENDOR_MELLANOX select MLX4_CORE - ---help--- + help This driver provides low-level InfiniBand support for Mellanox ConnectX PCI Express host channel adapters (HCAs). This is required to use InfiniBand protocols such as diff --git a/drivers/infiniband/hw/mlx5/Kconfig b/drivers/infiniband/hw/mlx5/Kconfig index ea248def4556..ef1ff42eaec5 100644 --- a/drivers/infiniband/hw/mlx5/Kconfig +++ b/drivers/infiniband/hw/mlx5/Kconfig @@ -2,7 +2,7 @@ config MLX5_INFINIBAND tristate "Mellanox 5th generation network adapters (ConnectX series) support" depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE - ---help--- + help This driver provides low-level InfiniBand support for Mellanox Connect-IB PCI Express host channel adapters (HCAs). This is required to use InfiniBand protocols such as diff --git a/drivers/infiniband/hw/mthca/Kconfig b/drivers/infiniband/hw/mthca/Kconfig index 66ff527f5928..faa7381f7d63 100644 --- a/drivers/infiniband/hw/mthca/Kconfig +++ b/drivers/infiniband/hw/mthca/Kconfig @@ -2,7 +2,7 @@ config INFINIBAND_MTHCA tristate "Mellanox HCA support" depends on PCI - ---help--- + help This is a low-level driver for Mellanox InfiniHost host channel adapters (HCAs), including the MT23108 PCI-X HCA ("Tavor") and the MT25208 PCI Express HCA ("Arbel"). @@ -11,7 +11,7 @@ config INFINIBAND_MTHCA_DEBUG bool "Verbose debugging output" if EXPERT depends on INFINIBAND_MTHCA default y - ---help--- + help This option causes debugging code to be compiled into the mthca driver. The output can be turned on via the debug_level module parameter (which can also be set after diff --git a/drivers/infiniband/hw/ocrdma/Kconfig b/drivers/infiniband/hw/ocrdma/Kconfig index dd4ec388208c..54bd70bc4d1a 100644 --- a/drivers/infiniband/hw/ocrdma/Kconfig +++ b/drivers/infiniband/hw/ocrdma/Kconfig @@ -4,6 +4,6 @@ config INFINIBAND_OCRDMA depends on ETHERNET && NETDEVICES && PCI && INET && (IPV6 || IPV6=n) select NET_VENDOR_EMULEX select BE2NET - ---help--- + help This driver provides low-level InfiniBand over Ethernet support for Emulex One Connect host channel adapters (HCAs). diff --git a/drivers/infiniband/hw/qedr/Kconfig b/drivers/infiniband/hw/qedr/Kconfig index 9c30325e1414..9e31d13b03c3 100644 --- a/drivers/infiniband/hw/qedr/Kconfig +++ b/drivers/infiniband/hw/qedr/Kconfig @@ -6,6 +6,6 @@ config INFINIBAND_QEDR select QED_LL2 select QED_OOO select QED_RDMA - ---help--- + help This driver provides low-level InfiniBand over Ethernet support for QLogic QED host channel adapters (HCAs). diff --git a/drivers/infiniband/hw/qib/Kconfig b/drivers/infiniband/hw/qib/Kconfig index 376d19f29346..6c4895777042 100644 --- a/drivers/infiniband/hw/qib/Kconfig +++ b/drivers/infiniband/hw/qib/Kconfig @@ -3,7 +3,7 @@ config INFINIBAND_QIB tristate "Intel PCIe HCA support" depends on 64BIT && INFINIBAND_RDMAVT depends on PCI - ---help--- + help This is a low-level driver for Intel PCIe QLE InfiniBand host channel adapters. This driver does not support the Intel HyperTransport card (model QHT7140). @@ -12,6 +12,6 @@ config INFINIBAND_QIB_DCA bool "QIB DCA support" depends on INFINIBAND_QIB && DCA && SMP && !(INFINIBAND_QIB=y && DCA=m) default y - ---help--- + help Setting this enables DCA support on some Intel chip sets with the iba7322 HCA. diff --git a/drivers/infiniband/hw/usnic/Kconfig b/drivers/infiniband/hw/usnic/Kconfig index c0847d9e2539..9019599c173b 100644 --- a/drivers/infiniband/hw/usnic/Kconfig +++ b/drivers/infiniband/hw/usnic/Kconfig @@ -6,6 +6,6 @@ config INFINIBAND_USNIC select ENIC select NET_VENDOR_CISCO select PCI_IOV - ---help--- + help This is a low-level driver for Cisco's Virtual Interface Cards (VICs), including the VIC 1240 and 1280 cards. diff --git a/drivers/infiniband/hw/vmw_pvrdma/Kconfig b/drivers/infiniband/hw/vmw_pvrdma/Kconfig index b99c9f0fc06a..a11e892e5e77 100644 --- a/drivers/infiniband/hw/vmw_pvrdma/Kconfig +++ b/drivers/infiniband/hw/vmw_pvrdma/Kconfig @@ -2,7 +2,7 @@ config INFINIBAND_VMWARE_PVRDMA tristate "VMware Paravirtualized RDMA Driver" depends on NETDEVICES && ETHERNET && PCI && INET && VMXNET3 - ---help--- + help This driver provides low-level support for VMware Paravirtual RDMA adapter. It interacts with the VMXNet3 driver to provide Ethernet capabilities. diff --git a/drivers/infiniband/sw/rdmavt/Kconfig b/drivers/infiniband/sw/rdmavt/Kconfig index 1f2759c72108..9ef5f5ce1ff6 100644 --- a/drivers/infiniband/sw/rdmavt/Kconfig +++ b/drivers/infiniband/sw/rdmavt/Kconfig @@ -4,5 +4,5 @@ config INFINIBAND_RDMAVT depends on X86_64 && ARCH_DMA_ADDR_T_64BIT depends on PCI select DMA_VIRT_OPS - ---help--- + help This is a common software verbs provider for RDMA networks. diff --git a/drivers/infiniband/sw/rxe/Kconfig b/drivers/infiniband/sw/rxe/Kconfig index d9bcfe740588..a0c6c7dfc181 100644 --- a/drivers/infiniband/sw/rxe/Kconfig +++ b/drivers/infiniband/sw/rxe/Kconfig @@ -6,7 +6,7 @@ config RDMA_RXE select NET_UDP_TUNNEL select CRYPTO_CRC32 select DMA_VIRT_OPS - ---help--- + help This driver implements the InfiniBand RDMA transport over the Linux network stack. It enables a system with a standard Ethernet adapter to interoperate with a RoCE diff --git a/drivers/infiniband/ulp/ipoib/Kconfig b/drivers/infiniband/ulp/ipoib/Kconfig index 7af68604af77..254e31a90a66 100644 --- a/drivers/infiniband/ulp/ipoib/Kconfig +++ b/drivers/infiniband/ulp/ipoib/Kconfig @@ -2,7 +2,7 @@ config INFINIBAND_IPOIB tristate "IP-over-InfiniBand" depends on NETDEVICES && INET && (IPV6 || IPV6=n) - ---help--- + help Support for the IP-over-InfiniBand protocol (IPoIB). This transports IP packets over InfiniBand so you can use your IB device as a fancy NIC. @@ -13,7 +13,7 @@ config INFINIBAND_IPOIB_CM bool "IP-over-InfiniBand Connected Mode support" depends on INFINIBAND_IPOIB default n - ---help--- + help This option enables support for IPoIB connected mode. After enabling this option, you need to switch to connected mode through /sys/class/net/ibXXX/mode to actually create @@ -28,7 +28,7 @@ config INFINIBAND_IPOIB_DEBUG bool "IP-over-InfiniBand debugging" if EXPERT depends on INFINIBAND_IPOIB default y - ---help--- + help This option causes debugging code to be compiled into the IPoIB driver. The output can be turned on via the debug_level and mcast_debug_level module parameters (which @@ -42,7 +42,7 @@ config INFINIBAND_IPOIB_DEBUG config INFINIBAND_IPOIB_DEBUG_DATA bool "IP-over-InfiniBand data path debugging" depends on INFINIBAND_IPOIB_DEBUG - ---help--- + help This option compiles debugging code into the data path of the IPoIB driver. The output can be turned on via the data_debug_level module parameter; however, even with output diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig index 1d29dffeaff9..3016a0c9a9f0 100644 --- a/drivers/infiniband/ulp/iser/Kconfig +++ b/drivers/infiniband/ulp/iser/Kconfig @@ -3,7 +3,7 @@ config INFINIBAND_ISER tristate "iSCSI Extensions for RDMA (iSER)" depends on SCSI && INET && INFINIBAND_ADDR_TRANS select SCSI_ISCSI_ATTRS - ---help--- + help Support for the iSCSI Extensions for RDMA (iSER) Protocol over InfiniBand. This allows you to access storage devices that speak iSCSI over iSER over InfiniBand. diff --git a/drivers/infiniband/ulp/isert/Kconfig b/drivers/infiniband/ulp/isert/Kconfig index 1a3f5ca8354c..798147adbef1 100644 --- a/drivers/infiniband/ulp/isert/Kconfig +++ b/drivers/infiniband/ulp/isert/Kconfig @@ -2,5 +2,5 @@ config INFINIBAND_ISERT tristate "iSCSI Extensions for RDMA (iSER) target support" depends on INET && INFINIBAND_ADDR_TRANS && TARGET_CORE && ISCSI_TARGET - ---help--- + help Support for iSCSI Extensions for RDMA (iSER) Target on Infiniband fabrics. diff --git a/drivers/infiniband/ulp/opa_vnic/Kconfig b/drivers/infiniband/ulp/opa_vnic/Kconfig index a1f266b9c0b2..e84248587187 100644 --- a/drivers/infiniband/ulp/opa_vnic/Kconfig +++ b/drivers/infiniband/ulp/opa_vnic/Kconfig @@ -2,7 +2,7 @@ config INFINIBAND_OPA_VNIC tristate "Intel OPA VNIC support" depends on X86_64 && INFINIBAND - ---help--- + help This is Omni-Path (OPA) Virtual Network Interface Controller (VNIC) driver for Ethernet over Omni-Path feature. It implements the HW independent VNIC functionality. It interfaces with Linux stack for diff --git a/drivers/infiniband/ulp/srp/Kconfig b/drivers/infiniband/ulp/srp/Kconfig index 6f5e7b3a3864..67cd63d1399c 100644 --- a/drivers/infiniband/ulp/srp/Kconfig +++ b/drivers/infiniband/ulp/srp/Kconfig @@ -3,7 +3,7 @@ config INFINIBAND_SRP tristate "InfiniBand SCSI RDMA Protocol" depends on SCSI && INFINIBAND_ADDR_TRANS select SCSI_SRP_ATTRS - ---help--- + help Support for the SCSI RDMA Protocol over InfiniBand. This allows you to access storage devices that speak SRP over InfiniBand. diff --git a/drivers/infiniband/ulp/srpt/Kconfig b/drivers/infiniband/ulp/srpt/Kconfig index ce7567cea9f6..4b5d9b792cfa 100644 --- a/drivers/infiniband/ulp/srpt/Kconfig +++ b/drivers/infiniband/ulp/srpt/Kconfig @@ -2,7 +2,7 @@ config INFINIBAND_SRPT tristate "InfiniBand SCSI RDMA Protocol target support" depends on INFINIBAND && INFINIBAND_ADDR_TRANS && TARGET_CORE - ---help--- + help Support for the SCSI RDMA Protocol (SRP) Target driver. The SRP protocol is a protocol that allows an initiator to access |