diff options
Diffstat (limited to 'drivers/iio/light/rohm-bu27034.c')
| -rw-r--r-- | drivers/iio/light/rohm-bu27034.c | 1497 |
1 files changed, 1497 insertions, 0 deletions
diff --git a/drivers/iio/light/rohm-bu27034.c b/drivers/iio/light/rohm-bu27034.c new file mode 100644 index 000000000000..e486dcf35eba --- /dev/null +++ b/drivers/iio/light/rohm-bu27034.c @@ -0,0 +1,1497 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * BU27034 ROHM Ambient Light Sensor + * + * Copyright (c) 2023, ROHM Semiconductor. + * https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/units.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/iio-gts-helper.h> +#include <linux/iio/kfifo_buf.h> + +#define BU27034_REG_SYSTEM_CONTROL 0x40 +#define BU27034_MASK_SW_RESET BIT(7) +#define BU27034_MASK_PART_ID GENMASK(5, 0) +#define BU27034_ID 0x19 +#define BU27034_REG_MODE_CONTROL1 0x41 +#define BU27034_MASK_MEAS_MODE GENMASK(2, 0) + +#define BU27034_REG_MODE_CONTROL2 0x42 +#define BU27034_MASK_D01_GAIN GENMASK(7, 3) +#define BU27034_MASK_D2_GAIN_HI GENMASK(7, 6) +#define BU27034_MASK_D2_GAIN_LO GENMASK(2, 0) + +#define BU27034_REG_MODE_CONTROL3 0x43 +#define BU27034_REG_MODE_CONTROL4 0x44 +#define BU27034_MASK_MEAS_EN BIT(0) +#define BU27034_MASK_VALID BIT(7) +#define BU27034_REG_DATA0_LO 0x50 +#define BU27034_REG_DATA1_LO 0x52 +#define BU27034_REG_DATA2_LO 0x54 +#define BU27034_REG_DATA2_HI 0x55 +#define BU27034_REG_MANUFACTURER_ID 0x92 +#define BU27034_REG_MAX BU27034_REG_MANUFACTURER_ID + +/* + * The BU27034 does not have interrupt to trigger the data read when a + * measurement has finished. Hence we poll the VALID bit in a thread. We will + * try to wake the thread BU27034_MEAS_WAIT_PREMATURE_MS milliseconds before + * the expected sampling time to prevent the drifting. + * + * If we constantly wake up a bit too late we would eventually skip a sample. + * And because the sleep can't wake up _exactly_ at given time this would be + * inevitable even if the sensor clock would be perfectly phase-locked to CPU + * clock - which we can't say is the case. + * + * This is still fragile. No matter how big advance do we have, we will still + * risk of losing a sample because things can in a rainy-day scenario be + * delayed a lot. Yet, more we reserve the time for polling, more we also lose + * the performance by spending cycles polling the register. So, selecting this + * value is a balancing dance between severity of wasting CPU time and severity + * of losing samples. + * + * In most cases losing the samples is not _that_ crucial because light levels + * tend to change slowly. + * + * Other option that was pointed to me would be always sleeping 1/2 of the + * measurement time, checking the VALID bit and just sleeping again if the bit + * was not set. That should be pretty tolerant against missing samples due to + * the scheduling delays while also not wasting much of cycles for polling. + * Downside is that the time-stamps would be very inaccurate as the wake-up + * would not really be tied to the sensor toggling the valid bit. This would also + * result 'jumps' in the time-stamps when the delay drifted so that wake-up was + * performed during the consecutive wake-ups (Or, when sensor and CPU clocks + * were very different and scheduling the wake-ups was very close to given + * timeout - and when the time-outs were very close to the actual sensor + * sampling, Eg. once in a blue moon, two consecutive time-outs would occur + * without having a sample ready). + */ +#define BU27034_MEAS_WAIT_PREMATURE_MS 5 +#define BU27034_DATA_WAIT_TIME_US 1000 +#define BU27034_TOTAL_DATA_WAIT_TIME_US (BU27034_MEAS_WAIT_PREMATURE_MS * 1000) + +#define BU27034_RETRY_LIMIT 18 + +enum { + BU27034_CHAN_ALS, + BU27034_CHAN_DATA0, + BU27034_CHAN_DATA1, + BU27034_CHAN_DATA2, + BU27034_NUM_CHANS +}; + +static const unsigned long bu27034_scan_masks[] = { + GENMASK(BU27034_CHAN_DATA2, BU27034_CHAN_ALS), 0 +}; + +/* + * Available scales with gain 1x - 4096x, timings 55, 100, 200, 400 mS + * Time impacts to gain: 1x, 2x, 4x, 8x. + * + * => Max total gain is HWGAIN * gain by integration time (8 * 4096) = 32768 + * + * Using NANO precision for scale we must use scale 64x corresponding gain 1x + * to avoid precision loss. (32x would result scale 976 562.5(nanos). + */ +#define BU27034_SCALE_1X 64 + +/* See the data sheet for the "Gain Setting" table */ +#define BU27034_GSEL_1X 0x00 /* 00000 */ +#define BU27034_GSEL_4X 0x08 /* 01000 */ +#define BU27034_GSEL_16X 0x0a /* 01010 */ +#define BU27034_GSEL_32X 0x0b /* 01011 */ +#define BU27034_GSEL_64X 0x0c /* 01100 */ +#define BU27034_GSEL_256X 0x18 /* 11000 */ +#define BU27034_GSEL_512X 0x19 /* 11001 */ +#define BU27034_GSEL_1024X 0x1a /* 11010 */ +#define BU27034_GSEL_2048X 0x1b /* 11011 */ +#define BU27034_GSEL_4096X 0x1c /* 11100 */ + +/* Available gain settings */ +static const struct iio_gain_sel_pair bu27034_gains[] = { + GAIN_SCALE_GAIN(1, BU27034_GSEL_1X), + GAIN_SCALE_GAIN(4, BU27034_GSEL_4X), + GAIN_SCALE_GAIN(16, BU27034_GSEL_16X), + GAIN_SCALE_GAIN(32, BU27034_GSEL_32X), + GAIN_SCALE_GAIN(64, BU27034_GSEL_64X), + GAIN_SCALE_GAIN(256, BU27034_GSEL_256X), + GAIN_SCALE_GAIN(512, BU27034_GSEL_512X), + GAIN_SCALE_GAIN(1024, BU27034_GSEL_1024X), + GAIN_SCALE_GAIN(2048, BU27034_GSEL_2048X), + GAIN_SCALE_GAIN(4096, BU27034_GSEL_4096X), +}; + +/* + * The IC has 5 modes for sampling time. 5 mS mode is exceptional as it limits + * the data collection to data0-channel only and cuts the supported range to + * 10 bit. It is not supported by the driver. + * + * "normal" modes are 55, 100, 200 and 400 mS modes - which do have direct + * multiplying impact to the register values (similar to gain). + * + * This means that if meas-mode is changed for example from 400 => 200, + * the scale is doubled. Eg, time impact to total gain is x1, x2, x4, x8. + */ +#define BU27034_MEAS_MODE_100MS 0 +#define BU27034_MEAS_MODE_55MS 1 +#define BU27034_MEAS_MODE_200MS 2 +#define BU27034_MEAS_MODE_400MS 4 + +static const struct iio_itime_sel_mul bu27034_itimes[] = { + GAIN_SCALE_ITIME_US(400000, BU27034_MEAS_MODE_400MS, 8), + GAIN_SCALE_ITIME_US(200000, BU27034_MEAS_MODE_200MS, 4), + GAIN_SCALE_ITIME_US(100000, BU27034_MEAS_MODE_100MS, 2), + GAIN_SCALE_ITIME_US(55000, BU27034_MEAS_MODE_55MS, 1), +}; + +#define BU27034_CHAN_DATA(_name, _ch2) \ +{ \ + .type = IIO_INTENSITY, \ + .channel = BU27034_CHAN_##_name, \ + .channel2 = (_ch2), \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_separate_available = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \ + .info_mask_shared_by_all_available = \ + BIT(IIO_CHAN_INFO_INT_TIME), \ + .address = BU27034_REG_##_name##_LO, \ + .scan_index = BU27034_CHAN_##_name, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ + .indexed = 1, \ +} + +static const struct iio_chan_spec bu27034_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE), + .channel = BU27034_CHAN_ALS, + .scan_index = BU27034_CHAN_ALS, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_CPU, + }, + }, + /* + * The BU27034 DATA0 and DATA1 channels are both on the visible light + * area (mostly). The data0 sensitivity peaks at 500nm, DATA1 at 600nm. + * These wave lengths are pretty much on the border of colours making + * these a poor candidates for R/G/B standardization. Hence they're both + * marked as clear channels + */ + BU27034_CHAN_DATA(DATA0, IIO_MOD_LIGHT_CLEAR), + BU27034_CHAN_DATA(DATA1, IIO_MOD_LIGHT_CLEAR), + BU27034_CHAN_DATA(DATA2, IIO_MOD_LIGHT_IR), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +struct bu27034_data { + struct regmap *regmap; + struct device *dev; + /* + * Protect gain and time during scale adjustment and data reading. + * Protect measurement enabling/disabling. + */ + struct mutex mutex; + struct iio_gts gts; + struct task_struct *task; + __le16 raw[3]; + struct { + u32 mlux; + __le16 channels[3]; + s64 ts __aligned(8); + } scan; +}; + +struct bu27034_result { + u16 ch0; + u16 ch1; + u16 ch2; +}; + +static const struct regmap_range bu27034_volatile_ranges[] = { + { + .range_min = BU27034_REG_MODE_CONTROL4, + .range_max = BU27034_REG_MODE_CONTROL4, + }, { + .range_min = BU27034_REG_DATA0_LO, + .range_max = BU27034_REG_DATA2_HI, + }, +}; + +static const struct regmap_access_table bu27034_volatile_regs = { + .yes_ranges = &bu27034_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bu27034_volatile_ranges), +}; + +static const struct regmap_range bu27034_read_only_ranges[] = { + { + .range_min = BU27034_REG_DATA0_LO, + .range_max = BU27034_REG_DATA2_HI, + }, { + .range_min = BU27034_REG_MANUFACTURER_ID, + .range_max = BU27034_REG_MANUFACTURER_ID, + } +}; + +static const struct regmap_access_table bu27034_ro_regs = { + .no_ranges = &bu27034_read_only_ranges[0], + .n_no_ranges = ARRAY_SIZE(bu27034_read_only_ranges), +}; + +static const struct regmap_config bu27034_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = BU27034_REG_MAX, + .cache_type = REGCACHE_RBTREE, + .volatile_table = &bu27034_volatile_regs, + .wr_table = &bu27034_ro_regs, +}; + +struct bu27034_gain_check { + int old_gain; + int new_gain; + int chan; +}; + +static int bu27034_get_gain_sel(struct bu27034_data *data, int chan) +{ + int ret, val; + + switch (chan) { + case BU27034_CHAN_DATA0: + case BU27034_CHAN_DATA1: + { + int reg[] = { + [BU27034_CHAN_DATA0] = BU27034_REG_MODE_CONTROL2, + [BU27034_CHAN_DATA1] = BU27034_REG_MODE_CONTROL3, + }; + ret = regmap_read(data->regmap, reg[chan], &val); + if (ret) + return ret; + + return FIELD_GET(BU27034_MASK_D01_GAIN, val); + } + case BU27034_CHAN_DATA2: + { + int d2_lo_bits = fls(BU27034_MASK_D2_GAIN_LO); + + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL2, &val); + if (ret) + return ret; + + /* + * The data2 channel gain is composed by 5 non continuous bits + * [7:6], [2:0]. Thus when we combine the 5-bit 'selector' + * from register value we must right shift the high bits by 3. + */ + return FIELD_GET(BU27034_MASK_D2_GAIN_HI, val) << d2_lo_bits | + FIELD_GET(BU27034_MASK_D2_GAIN_LO, val); + } + default: + return -EINVAL; + } +} + +static int bu27034_get_gain(struct bu27034_data *data, int chan, int *gain) +{ + int ret, sel; + + ret = bu27034_get_gain_sel(data, chan); + if (ret < 0) + return ret; + + sel = ret; + + ret = iio_gts_find_gain_by_sel(&data->gts, sel); + if (ret < 0) { + dev_err(data->dev, "chan %u: unknown gain value 0x%x\n", chan, + sel); + + return ret; + } + + *gain = ret; + + return 0; +} + +static int bu27034_get_int_time(struct bu27034_data *data) +{ + int ret, sel; + + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &sel); + if (ret) + return ret; + + return iio_gts_find_int_time_by_sel(&data->gts, + sel & BU27034_MASK_MEAS_MODE); +} + +static int _bu27034_get_scale(struct bu27034_data *data, int channel, int *val, + int *val2) +{ + int gain, ret; + + ret = bu27034_get_gain(data, channel, &gain); + if (ret) + return ret; + + ret = bu27034_get_int_time(data); + if (ret < 0) + return ret; + + return iio_gts_get_scale(&data->gts, gain, ret, val, val2); +} + +static int bu27034_get_scale(struct bu27034_data *data, int channel, int *val, + int *val2) +{ + int ret; + + if (channel == BU27034_CHAN_ALS) { + *val = 0; + *val2 = 1000; + return IIO_VAL_INT_PLUS_MICRO; + } + + mutex_lock(&data->mutex); + ret = _bu27034_get_scale(data, channel, val, val2); + mutex_unlock(&data->mutex); + if (ret) + return ret; + + return IIO_VAL_INT_PLUS_NANO; +} + +/* Caller should hold the lock to protect lux reading */ +static int bu27034_write_gain_sel(struct bu27034_data *data, int chan, int sel) +{ + static const int reg[] = { + [BU27034_CHAN_DATA0] = BU27034_REG_MODE_CONTROL2, + [BU27034_CHAN_DATA1] = BU27034_REG_MODE_CONTROL3, + }; + int mask, val; + + if (chan != BU27034_CHAN_DATA0 && chan != BU27034_CHAN_DATA1) + return -EINVAL; + + val = FIELD_PREP(BU27034_MASK_D01_GAIN, sel); + + mask = BU27034_MASK_D01_GAIN; + + if (chan == BU27034_CHAN_DATA0) { + /* + * We keep the same gain for channel 2 as we set for channel 0 + * We can't allow them to be individually controlled because + * setting one will impact also the other. Also, if we don't + * always update both gains we may result unsupported bit + * combinations. + * + * This is not nice but this is yet another place where the + * user space must be prepared to surprizes. Namely, see chan 2 + * gain changed when chan 0 gain is changed. + * + * This is not fatal for most users though. I don't expect the + * channel 2 to be used in any generic cases - the intensity + * values provided by the sensor for IR area are not openly + * documented. Also, channel 2 is not used for visible light. + * + * So, if there is application which is written to utilize the + * channel 2 - then it is probably specifically targeted to this + * sensor and knows how to utilize those values. It is safe to + * hope such user can also cope with the gain changes. + */ + mask |= BU27034_MASK_D2_GAIN_LO; + + /* + * The D2 gain bits are directly the lowest bits of selector. + * Just do add those bits to the value + */ + val |= sel & BU27034_MASK_D2_GAIN_LO; + } + + return regmap_update_bits(data->regmap, reg[chan], mask, val); +} + +static int bu27034_set_gain(struct bu27034_data *data, int chan, int gain) +{ + int ret; + + /* + * We don't allow setting channel 2 gain as it messes up the + * gain for channel 0 - which shares the high bits + */ + if (chan != BU27034_CHAN_DATA0 && chan != BU27034_CHAN_DATA1) + return -EINVAL; + + ret = iio_gts_find_sel_by_gain(&data->gts, gain); + if (ret < 0) + return ret; + + return bu27034_write_gain_sel(data, chan, ret); +} + +/* Caller should hold the lock to protect data->int_time */ +static int bu27034_set_int_time(struct bu27034_data *data, int time) +{ + int ret; + + ret = iio_gts_find_sel_by_int_time(&data->gts, time); + if (ret < 0) + return ret; + + return regmap_update_bits(data->regmap, BU27034_REG_MODE_CONTROL1, + BU27034_MASK_MEAS_MODE, ret); +} + +/* + * We try to change the time in such way that the scale is maintained for + * given channels by adjusting gain so that it compensates the time change. + */ +static int bu27034_try_set_int_time(struct bu27034_data *data, int time_us) +{ + struct bu27034_gain_check gains[] = { + { .chan = BU27034_CHAN_DATA0 }, + { .chan = BU27034_CHAN_DATA1 }, + }; + int numg = ARRAY_SIZE(gains); + int ret, int_time_old, i; + + mutex_lock(&data->mutex); + ret = bu27034_get_int_time(data); + if (ret < 0) + goto unlock_out; + + int_time_old = ret; + + if (!iio_gts_valid_time(&data->gts, time_us)) { + dev_err(data->dev, "Unsupported integration time %u\n", + time_us); + ret = -EINVAL; + + goto unlock_out; + } + + if (time_us == int_time_old) { + ret = 0; + goto unlock_out; + } + + for (i = 0; i < numg; i++) { + ret = bu27034_get_gain(data, gains[i].chan, &gains[i].old_gain); + if (ret) + goto unlock_out; + + ret = iio_gts_find_new_gain_by_old_gain_time(&data->gts, + gains[i].old_gain, + int_time_old, time_us, + &gains[i].new_gain); + if (ret) { + int scale1, scale2; + bool ok; + + _bu27034_get_scale(data, gains[i].chan, &scale1, &scale2); + dev_dbg(data->dev, + "chan %u, can't support time %u with scale %u %u\n", + gains[i].chan, time_us, scale1, scale2); + + if (gains[i].new_gain < 0) + goto unlock_out; + + /* + * If caller requests for integration time change and we + * can't support the scale - then the caller should be + * prepared to 'pick up the pieces and deal with the + * fact that the scale changed'. + */ + ret = iio_find_closest_gain_low(&data->gts, + gains[i].new_gain, &ok); + + if (!ok) + dev_dbg(data->dev, + "optimal gain out of range for chan %u\n", + gains[i].chan); + + if (ret < 0) { + dev_dbg(data->dev, + "Total gain increase. Risk of saturation"); + ret = iio_gts_get_min_gain(&data->gts); + if (ret < 0) + goto unlock_out; + } + dev_dbg(data->dev, "chan %u scale changed\n", + gains[i].chan); + gains[i].new_gain = ret; + dev_dbg(data->dev, "chan %u new gain %u\n", + gains[i].chan, gains[i].new_gain); + } + } + + for (i = 0; i < numg; i++) { + ret = bu27034_set_gain(data, gains[i].chan, gains[i].new_gain); + if (ret) + goto unlock_out; + } + + ret = bu27034_set_int_time(data, time_us); + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bu27034_set_scale(struct bu27034_data *data, int chan, + int val, int val2) +{ + int ret, time_sel, gain_sel, i; + bool found = false; + + if (chan == BU27034_CHAN_DATA2) + return -EINVAL; + + if (chan == BU27034_CHAN_ALS) { + if (val == 0 && val2 == 1000) + return 0; + + return -EINVAL; + } + + mutex_lock(&data->mutex); + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &time_sel); + if (ret) + goto unlock_out; + + ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, time_sel, + val, val2 * 1000, &gain_sel); + if (ret) { + /* + * Could not support scale with given time. Need to change time. + * We still want to maintain the scale for all channels + */ + struct bu27034_gain_check gain; + int new_time_sel; + + /* + * Populate information for the other channel which should also + * maintain the scale. (Due to the HW limitations the chan2 + * gets the same gain as chan0, so we only need to explicitly + * set the chan 0 and 1). + */ + if (chan == BU27034_CHAN_DATA0) + gain.chan = BU27034_CHAN_DATA1; + else if (chan == BU27034_CHAN_DATA1) + gain.chan = BU27034_CHAN_DATA0; + + ret = bu27034_get_gain(data, gain.chan, &gain.old_gain); + if (ret) + goto unlock_out; + + /* + * Iterate through all the times to see if we find one which + * can support requested scale for requested channel, while + * maintaining the scale for other channels + */ + for (i = 0; i < data->gts.num_itime; i++) { + new_time_sel = data->gts.itime_table[i].sel; + + if (new_time_sel == time_sel) + continue; + + /* Can we provide requested scale with this time? */ + ret = iio_gts_find_gain_sel_for_scale_using_time( + &data->gts, new_time_sel, val, val2 * 1000, + &gain_sel); + if (ret) + continue; + + /* Can the other channel(s) maintain scale? */ + ret = iio_gts_find_new_gain_sel_by_old_gain_time( + &data->gts, gain.old_gain, time_sel, + new_time_sel, &gain.new_gain); + if (!ret) { + /* Yes - we found suitable time */ + found = true; + break; + } + } + if (!found) { + dev_dbg(data->dev, + "Can't set scale maintaining other channels\n"); + ret = -EINVAL; + + goto unlock_out; + } + + ret = bu27034_set_gain(data, gain.chan, gain.new_gain); + if (ret) + goto unlock_out; + + ret = regmap_update_bits(data->regmap, BU27034_REG_MODE_CONTROL1, + BU27034_MASK_MEAS_MODE, new_time_sel); + if (ret) + goto unlock_out; + } + + ret = bu27034_write_gain_sel(data, chan, gain_sel); +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +/* + * for (D1/D0 < 0.87): + * lx = 0.004521097 * D1 - 0.002663996 * D0 + + * 0.00012213 * D1 * D1 / D0 + * + * => 115.7400832 * ch1 / gain1 / mt - + * 68.1982976 * ch0 / gain0 / mt + + * 0.00012213 * 25600 * (ch1 / gain1 / mt) * 25600 * + * (ch1 /gain1 / mt) / (25600 * ch0 / gain0 / mt) + * + * A = 0.00012213 * 25600 * (ch1 /gain1 / mt) * 25600 * + * (ch1 /gain1 / mt) / (25600 * ch0 / gain0 / mt) + * => 0.00012213 * 25600 * (ch1 /gain1 / mt) * + * (ch1 /gain1 / mt) / (ch0 / gain0 / mt) + * => 0.00012213 * 25600 * (ch1 / gain1) * (ch1 /gain1 / mt) / + * (ch0 / gain0) + * => 0.00012213 * 25600 * (ch1 / gain1) * (ch1 /gain1 / mt) * + * gain0 / ch0 + * => 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / mt /ch0 + * + * lx = (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0) / + * mt + A + * => (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0) / + * mt + 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / mt / + * ch0 + * + * => (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0 + + * 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / ch0) / + * mt + * + * For (0.87 <= D1/D0 < 1.00) + * lx = (0.001331* D0 + 0.0000354 * D1) * ((D1/D0 – 0.87) * (0.385) + 1) + * => (0.001331 * 256 * 100 * ch0 / gain0 / mt + 0.0000354 * 256 * + * 100 * ch1 / gain1 / mt) * ((D1/D0 - 0.87) * (0.385) + 1) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * ((D1/D0 - 0.87) * (0.385) + 1) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (0.385 * D1/D0 - 0.66505) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (0.385 * 256 * 100 * ch1 / gain1 / mt / (256 * 100 * ch0 / gain0 / mt) - 0.66505) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (9856 * ch1 / gain1 / mt / (25600 * ch0 / gain0 / mt) + 0.66505) + * => 13.118336 * ch1 / (gain1 * mt) + * + 22.66064768 * ch0 / (gain0 * mt) + * + 8931.90144 * ch1 * ch1 * gain0 / + * (25600 * ch0 * gain1 * gain1 * mt) + * + 0.602694912 * ch1 / (gain1 * mt) + * + * => [0.3489024 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + * + 22.66064768 * ch0 / gain0 + * + 13.721030912 * ch1 / gain1 + * ] / mt + * + * For (D1/D0 >= 1.00) + * + * lx = (0.001331* D0 + 0.0000354 * D1) * ((D1/D0 – 2.0) * (-0.05) + 1) + * => (0.001331* D0 + 0.0000354 * D1) * (-0.05D1/D0 + 1.1) + * => (0.001331 * 256 * 100 * ch0 / gain0 / mt + 0.0000354 * 256 * + * 100 * ch1 / gain1 / mt) * (-0.05D1/D0 + 1.1) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (-0.05 * 256 * 100 * ch1 / gain1 / mt / (256 * 100 * ch0 / gain0 / mt) + 1.1) + * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) * + * (-1280 * ch1 / (gain1 * mt * 25600 * ch0 / gain0 / mt) + 1.1) + * => (34.0736 * ch0 * -1280 * ch1 * gain0 * mt /( gain0 * mt * gain1 * mt * 25600 * ch0) + * + 34.0736 * 1.1 * ch0 / (gain0 * mt) + * + 0.90624 * ch1 * -1280 * ch1 *gain0 * mt / (gain1 * mt *gain1 * mt * 25600 * ch0) + * + 1.1 * 0.90624 * ch1 / (gain1 * mt) + * => -43614.208 * ch1 / (gain1 * mt * 25600) + * + 37.48096 ch0 / (gain0 * mt) + * - 1159.9872 * ch1 * ch1 * gain0 / (gain1 * gain1 * mt * 25600 * ch0) + * + 0.996864 ch1 / (gain1 * mt) + * => [ + * - 0.045312 * ch1 * ch1 * gain0 / (gain1 * gain1 * ch0) + * - 0.706816 * ch1 / gain1 + * + 37.48096 ch0 /gain0 + * ] * mt + * + * + * So, the first case (D1/D0 < 0.87) can be computed to a form: + * + * lx = (3.126528 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + + * 115.7400832 * ch1 / gain1 + + * -68.1982976 * ch0 / gain0 + * / mt + * + * Second case (0.87 <= D1/D0 < 1.00) goes to form: + * + * => [0.3489024 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + + * 13.721030912 * ch1 / gain1 + + * 22.66064768 * ch0 / gain0 + * ] / mt + * + * Third case (D1/D0 >= 1.00) goes to form: + * => [-0.045312 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + + * -0.706816 * ch1 / gain1 + + * 37.48096 ch0 /(gain0 + * ] / mt + * + * This can be unified to format: + * lx = [ + * A * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) + + * B * ch1 / gain1 + + * C * ch0 / gain0 + * ] / mt + * + * For case 1: + * A = 3.126528, + * B = 115.7400832 + * C = -68.1982976 + * + * For case 2: + * A = 0.3489024 + * B = 13.721030912 + * C = 22.66064768 + * + * For case 3: + * A = -0.045312 + * B = -0.706816 + * C = 37.48096 + */ + +struct bu27034_lx_coeff { + unsigned int A; + unsigned int B; + unsigned int C; + /* Indicate which of the coefficients above are negative */ + bool is_neg[3]; +}; + +static inline u64 gain_mul_div_helper(u64 val, unsigned int gain, + unsigned int div) +{ + /* + * Max gain for a channel is 4096. The max u64 (0xffffffffffffffffULL) + * divided by 4096 is 0xFFFFFFFFFFFFF (GENMASK_ULL(51, 0)) (floored). + * Thus, the 0xFFFFFFFFFFFFF is the largest value we can safely multiply + * with the gain, no matter what gain is set. + * + * So, multiplication with max gain may overflow if val is greater than + * 0xFFFFFFFFFFFFF (52 bits set).. + * + * If this is the case we divide first. + */ + if (val < GENMASK_ULL(51, 0)) { + val *= gain; + do_div(val, div); + } else { + do_div(val, div); + val *= gain; + } + + return val; +} + +static u64 bu27034_fixp_calc_t1_64bit(unsigned int coeff, unsigned int ch0, + unsigned int ch1, unsigned int gain0, + unsigned int gain1) +{ + unsigned int helper; + u64 helper64; + + helper64 = (u64)coeff * (u64)ch1 * (u64)ch1; + + helper = gain1 * gain1; + if (helper > ch0) { + do_div(helper64, helper); + + return gain_mul_div_helper(helper64, gain0, ch0); + } + + do_div(helper64, ch0); + + return gain_mul_div_helper(helper64, gain0, helper); + +} + +static u64 bu27034_fixp_calc_t1(unsigned int coeff, unsigned int ch0, + unsigned int ch1, unsigned int gain0, + unsigned int gain1) +{ + unsigned int helper, tmp; + + /* + * Here we could overflow even the 64bit value. Hence we + * multiply with gain0 only after the divisions - even though + * it may result loss of accuracy + */ + helper = coeff * ch1 * ch1; + tmp = helper * gain0; + + helper = ch1 * ch1; + + if (check_mul_overflow(helper, coeff, &helper)) + return bu27034_fixp_calc_t1_64bit(coeff, ch0, ch1, gain0, gain1); + + if (check_mul_overflow(helper, gain0, &tmp)) + return bu27034_fixp_calc_t1_64bit(coeff, ch0, ch1, gain0, gain1); + + return tmp / (gain1 * gain1) / ch0; + +} + +static u64 bu27034_fixp_calc_t23(unsigned int coeff, unsigned int ch, + unsigned int gain) +{ + unsigned int helper; + u64 helper64; + + if (!check_mul_overflow(coeff, ch, &helper)) + return helper / gain; + + helper64 = (u64)coeff * (u64)ch; + do_div(helper64, gain); + + return helper64; +} + +static int bu27034_fixp_calc_lx(unsigned int ch0, unsigned int ch1, + unsigned int gain0, unsigned int gain1, + unsigned int meastime, int coeff_idx) +{ + static const struct bu27034_lx_coeff coeff[] = { + { + .A = 31265280, /* 3.126528 */ + .B = 1157400832, /*115.7400832 */ + .C = 681982976, /* -68.1982976 */ + .is_neg = {false, false, true}, + }, { + .A = 3489024, /* 0.3489024 */ + .B = 137210309, /* 13.721030912 */ + .C = 226606476, /* 22.66064768 */ + /* All terms positive */ + }, { + .A = 453120, /* -0.045312 */ + .B = 7068160, /* -0.706816 */ + .C = 374809600, /* 37.48096 */ + .is_neg = {true, true, false}, + } + }; + const struct bu27034_lx_coeff *c = &coeff[coeff_idx]; + u64 res = 0, terms[3]; + int i; + + if (coeff_idx >= ARRAY_SIZE(coeff)) + return -EINVAL; + + terms[0] = bu27034_fixp_calc_t1(c->A, ch0, ch1, gain0, gain1); + terms[1] = bu27034_fixp_calc_t23(c->B, ch1, gain1); + terms[2] = bu27034_fixp_calc_t23(c->C, ch0, gain0); + + /* First, add positive terms */ + for (i = 0; i < 3; i++) + if (!c->is_neg[i]) + res += terms[i]; + + /* No positive term => zero lux */ + if (!res) + return 0; + + /* Then, subtract negative terms (if any) */ + for (i = 0; i < 3; i++) + if (c->is_neg[i]) { + /* + * If the negative term is greater than positive - then + * the darkness has taken over and we are all doomed! Eh, + * I mean, then we can just return 0 lx and go out + */ + if (terms[i] >= res) + return 0; + + res -= terms[i]; + } + + meastime *= 10; + do_div(res, meastime); + + return (int) res; +} + +static bool bu27034_has_valid_sample(struct bu27034_data *data) +{ + int ret, val; + + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL4, &val); + if (ret) { + dev_err(data->dev, "Read failed %d\n", ret); + + return false; + } + + return val & BU27034_MASK_VALID; +} + +/* + * Reading the register where VALID bit is clears this bit. (So does changing + * any gain / integration time configuration registers) The bit gets + * set when we have acquired new data. We use this bit to indicate data + * validity. + */ +static void bu27034_invalidate_read_data(struct bu27034_data *data) +{ + bu27034_has_valid_sample(data); +} + +static int bu27034_read_result(struct bu27034_data *data, int chan, int *res) +{ + int reg[] = { + [BU27034_CHAN_DATA0] = BU27034_REG_DATA0_LO, + [BU27034_CHAN_DATA1] = BU27034_REG_DATA1_LO, + [BU27034_CHAN_DATA2] = BU27034_REG_DATA2_LO, + }; + int valid, ret; + __le16 val; + + ret = regmap_read_poll_timeout(data->regmap, BU27034_REG_MODE_CONTROL4, + valid, (valid & BU27034_MASK_VALID), + BU27034_DATA_WAIT_TIME_US, 0); + if (ret) + return ret; + + ret = regmap_bulk_read(data->regmap, reg[chan], &val, sizeof(val)); + if (ret) + return ret; + + *res = le16_to_cpu(val); + + return 0; +} + +static int bu27034_get_result_unlocked(struct bu27034_data *data, __le16 *res, + int size) +{ + int ret = 0, retry_cnt = 0; + +retry: + /* Get new value from sensor if data is ready */ + if (bu27034_has_valid_sample(data)) { + ret = regmap_bulk_read(data->regmap, BU27034_REG_DATA0_LO, + res, size); + if (ret) + return ret; + + bu27034_invalidate_read_data(data); + } else { + /* No new data in sensor. Wait and retry */ + retry_cnt++; + + if (retry_cnt > BU27034_RETRY_LIMIT) { + dev_err(data->dev, "No data from sensor\n"); + + return -ETIMEDOUT; + } + + msleep(25); + + goto retry; + } + + return ret; +} + +static int bu27034_meas_set(struct bu27034_data *data, bool en) +{ + if (en) + return regmap_set_bits(data->regmap, BU27034_REG_MODE_CONTROL4, + BU27034_MASK_MEAS_EN); + + return regmap_clear_bits(data->regmap, BU27034_REG_MODE_CONTROL4, + BU27034_MASK_MEAS_EN); +} + +static int bu27034_get_single_result(struct bu27034_data *data, int chan, + int *val) +{ + int ret; + + if (chan < BU27034_CHAN_DATA0 || chan > BU27034_CHAN_DATA2) + return -EINVAL; + + ret = bu27034_meas_set(data, true); + if (ret) + return ret; + + ret = bu27034_get_int_time(data); + if (ret < 0) + return ret; + + msleep(ret / 1000); + + return bu27034_read_result(data, chan, val); +} + +/* + * The formula given by vendor for computing luxes out of data0 and data1 + * (in open air) is as follows: + * + * Let's mark: + * D0 = data0/ch0_gain/meas_time_ms * 25600 + * D1 = data1/ch1_gain/meas_time_ms * 25600 + * + * Then: + * if (D1/D0 < 0.87) + * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 0.87) * 3.45 + 1) + * else if (D1/D0 < 1) + * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 0.87) * 0.385 + 1) + * else + * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 2) * -0.05 + 1) + * + * We use it here. Users who have for example some colored lens + * need to modify the calculation but I hope this gives a starting point for + * those working with such devices. + */ + +static int bu27034_calc_mlux(struct bu27034_data *data, __le16 *res, int *val) +{ + unsigned int gain0, gain1, meastime; + unsigned int d1_d0_ratio_scaled; + u16 ch0, ch1; + u64 helper64; + int ret; + + /* + * We return 0 lux if calculation fails. This should be reasonably + * easy to spot from the buffers especially if raw-data channels show + * valid values + */ + *val = 0; + + ch0 = max_t(u16, 1, le16_to_cpu(res[0])); + ch1 = max_t(u16, 1, le16_to_cpu(res[1])); + + ret = bu27034_get_gain(data, BU27034_CHAN_DATA0, &gain0); + if (ret) + return ret; + + ret = bu27034_get_gain(data, BU27034_CHAN_DATA1, &gain1); + if (ret) + return ret; + + ret = bu27034_get_int_time(data); + if (ret < 0) + return ret; + + meastime = ret; + + d1_d0_ratio_scaled = (unsigned int)ch1 * (unsigned int)gain0 * 100; + helper64 = (u64)ch1 * (u64)gain0 * 100LLU; + + if (helper64 != d1_d0_ratio_scaled) { + unsigned int div = (unsigned int)ch0 * gain1; + + do_div(helper64, div); + d1_d0_ratio_scaled = helper64; + } else { + d1_d0_ratio_scaled /= ch0 * gain1; + } + + if (d1_d0_ratio_scaled < 87) + ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 0); + else if (d1_d0_ratio_scaled < 100) + ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 1); + else + ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 2); + + if (ret < 0) + return ret; + + *val = ret; + + return 0; + +} + +static int bu27034_get_mlux(struct bu27034_data *data, int chan, int *val) +{ + __le16 res[3]; + int ret; + + ret = bu27034_meas_set(data, true); + if (ret) + return ret; + + ret = bu27034_get_result_unlocked(data, &res[0], sizeof(res)); + if (ret) + return ret; + + ret = bu27034_calc_mlux(data, res, val); + if (ret) + return ret; + + ret = bu27034_meas_set(data, false); + if (ret) + dev_err(data->dev, "failed to disable measurement\n"); + + return 0; +} + +static int bu27034_read_raw(struct iio_dev *idev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct bu27034_data *data = iio_priv(idev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + *val = bu27034_get_int_time(data); + if (*val < 0) + return *val; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + return bu27034_get_scale(data, chan->channel, val, val2); + + case IIO_CHAN_INFO_RAW: + { + int (*result_get)(struct bu27034_data *data, int chan, int *val); + + if (chan->type == IIO_INTENSITY) + result_get = bu27034_get_single_result; + else if (chan->type == IIO_LIGHT) + result_get = bu27034_get_mlux; + else + return -EINVAL; + + /* Don't mess with measurement enabling while buffering */ + ret = iio_device_claim_direct_mode(idev); + if (ret) + return ret; + + mutex_lock(&data->mutex); + /* + * Reading one channel at a time is inefficient but we + * don't care here. Buffered version should be used if + * performance is an issue. + */ + ret = result_get(data, chan->channel, val); + + mutex_unlock(&data->mutex); + iio_device_release_direct_mode(idev); + + if (ret) + return ret; + + return IIO_VAL_INT; + } + default: + return -EINVAL; + } +} + +static int bu27034_write_raw(struct iio_dev *idev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct bu27034_data *data = iio_priv(idev); + int ret; + + ret = iio_device_claim_direct_mode(idev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + ret = bu27034_set_scale(data, chan->channel, val, val2); + break; + case IIO_CHAN_INFO_INT_TIME: + ret = bu27034_try_set_int_time(data, val); + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(idev); + + return ret; +} + +static int bu27034_read_avail(struct iio_dev *idev, + struct iio_chan_spec const *chan, const int **vals, + int *type, int *length, long mask) +{ + struct bu27034_data *data = iio_priv(idev); + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + return iio_gts_avail_times(&data->gts, vals, type, length); + case IIO_CHAN_INFO_SCALE: + return iio_gts_all_avail_scales(&data->gts, vals, type, length); + default: + return -EINVAL; + } +} + +static const struct iio_info bu27034_info = { + .read_raw = &bu27034_read_raw, + .write_raw = &bu27034_write_raw, + .read_avail = &bu27034_read_avail, +}; + +static int bu27034_chip_init(struct bu27034_data *data) +{ + int ret, sel; + + /* Reset */ + ret = regmap_update_bits(data->regmap, BU27034_REG_SYSTEM_CONTROL, + BU27034_MASK_SW_RESET, BU27034_MASK_SW_RESET); + if (ret) + return dev_err_probe(data->dev, ret, "Sensor reset failed\n"); + + msleep(1); + /* + * Read integration time here to ensure it is in regmap cache. We do + * this to speed-up the int-time acquisition in the start of the buffer + * handling thread where longer delays could make it more likely we end + * up skipping a sample, and where the longer delays make timestamps + * less accurate. + */ + ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &sel); + if (ret) + dev_err(data->dev, "reading integration time failed\n"); + + return 0; +} + +static int bu27034_wait_for_data(struct bu27034_data *data) +{ + int ret, val; + + ret = regmap_read_poll_timeout(data->regmap, BU27034_REG_MODE_CONTROL4, + val, val & BU27034_MASK_VALID, + BU27034_DATA_WAIT_TIME_US, + BU27034_TOTAL_DATA_WAIT_TIME_US); + if (ret) { + dev_err(data->dev, "data polling %s\n", + !(val & BU27034_MASK_VALID) ? "timeout" : "fail"); + + return ret; + } + + ret = regmap_bulk_read(data->regmap, BU27034_REG_DATA0_LO, + &data->scan.channels[0], + sizeof(data->scan.channels)); + if (ret) + return ret; + + bu27034_invalidate_read_data(data); + + return 0; +} + +static int bu27034_buffer_thread(void *arg) +{ + struct iio_dev *idev = arg; + struct bu27034_data *data; + int wait_ms; + + data = iio_priv(idev); + + wait_ms = bu27034_get_int_time(data); + wait_ms /= 1000; + + wait_ms -= BU27034_MEAS_WAIT_PREMATURE_MS; + + while (!kthread_should_stop()) { + int ret; + int64_t tstamp; + + msleep(wait_ms); + ret = bu27034_wait_for_data(data); + if (ret) + continue; + + tstamp = iio_get_time_ns(idev); + + if (test_bit(BU27034_CHAN_ALS, idev->active_scan_mask)) { + int mlux; + + ret = bu27034_calc_mlux(data, &data->scan.channels[0], + &mlux); + if (ret) + dev_err(data->dev, "failed to calculate lux\n"); + + /* + * The maximum Milli lux value we get with gain 1x time + * 55mS data ch0 = 0xffff ch1 = 0xffff fits in 26 bits + * so there should be no problem returning int from + * computations and casting it to u32 + */ + data->scan.mlux = (u32)mlux; + } + iio_push_to_buffers_with_timestamp(idev, &data->scan, tstamp); + } + + return 0; +} + +static int bu27034_buffer_enable(struct iio_dev *idev) +{ + struct bu27034_data *data = iio_priv(idev); + struct task_struct *task; + int ret; + + mutex_lock(&data->mutex); + ret = bu27034_meas_set(data, true); + if (ret) + goto unlock_out; + + task = kthread_run(bu27034_buffer_thread, idev, + "bu27034-buffering-%u", + iio_device_id(idev)); + if (IS_ERR(task)) { + ret = PTR_ERR(task); + goto unlock_out; + } + + data->task = task; + +unlock_out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bu27034_buffer_disable(struct iio_dev *idev) +{ + struct bu27034_data *data = iio_priv(idev); + int ret; + + mutex_lock(&data->mutex); + if (data->task) { + kthread_stop(data->task); + data->task = NULL; + } + + ret = bu27034_meas_set(data, false); + mutex_unlock(&data->mutex); + + return ret; +} + +static const struct iio_buffer_setup_ops bu27034_buffer_ops = { + .postenable = &bu27034_buffer_enable, + .predisable = &bu27034_buffer_disable, +}; + +static int bu27034_probe(struct i2c_client *i2c) +{ + struct device *dev = &i2c->dev; + struct bu27034_data *data; + struct regmap *regmap; + struct iio_dev *idev; + unsigned int part_id, reg; + int ret; + + regmap = devm_regmap_init_i2c(i2c, &bu27034_regmap); + if (IS_ERR(regmap)) + return dev_err_probe(dev, PTR_ERR(regmap), + "Failed to initialize Regmap\n"); + + idev = devm_iio_device_alloc(dev, sizeof(*data)); + if (!idev) + return -ENOMEM; + + ret = devm_regulator_get_enable(dev, "vdd"); + if (ret) + return dev_err_probe(dev, ret, "Failed to get regulator\n"); + + data = iio_priv(idev); + + ret = regmap_read(regmap, BU27034_REG_SYSTEM_CONTROL, ®); + if (ret) + return dev_err_probe(dev, ret, "Failed to access sensor\n"); + + part_id = FIELD_GET(BU27034_MASK_PART_ID, reg); + + if (part_id != BU27034_ID) + dev_warn(dev, "unknown device 0x%x\n", part_id); + + ret = devm_iio_init_iio_gts(dev, BU27034_SCALE_1X, 0, bu27034_gains, + ARRAY_SIZE(bu27034_gains), bu27034_itimes, + ARRAY_SIZE(bu27034_itimes), &data->gts); + if (ret) + return ret; + + mutex_init(&data->mutex); + data->regmap = regmap; + data->dev = dev; + + idev->channels = bu27034_channels; + idev->num_channels = ARRAY_SIZE(bu27034_channels); + idev->name = "bu27034"; + idev->info = &bu27034_info; + + idev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE; + idev->available_scan_masks = bu27034_scan_masks; + + ret = bu27034_chip_init(data); + if (ret) + return ret; + + ret = devm_iio_kfifo_buffer_setup(dev, idev, &bu27034_buffer_ops); + if (ret) + return dev_err_probe(dev, ret, "buffer setup failed\n"); + + ret = devm_iio_device_register(dev, idev); + if (ret < 0) + return dev_err_probe(dev, ret, + "Unable to register iio device\n"); + + return ret; +} + +static const struct of_device_id bu27034_of_match[] = { + { .compatible = "rohm,bu27034" }, + { } +}; +MODULE_DEVICE_TABLE(of, bu27034_of_match); + +static struct i2c_driver bu27034_i2c_driver = { + .driver = { + .name = "bu27034-als", + .of_match_table = bu27034_of_match, + }, + .probe_new = bu27034_probe, +}; +module_i2c_driver(bu27034_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>"); +MODULE_DESCRIPTION("ROHM BU27034 ambient light sensor driver"); +MODULE_IMPORT_NS(IIO_GTS_HELPER); |