diff options
Diffstat (limited to 'drivers/ide/scc_pata.c')
| -rw-r--r-- | drivers/ide/scc_pata.c | 887 |
1 files changed, 0 insertions, 887 deletions
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c deleted file mode 100644 index 2a2d188b5d5b..000000000000 --- a/drivers/ide/scc_pata.c +++ /dev/null @@ -1,887 +0,0 @@ -/* - * Support for IDE interfaces on Celleb platform - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/ide/pci/siimage.c: - * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org> - * Copyright (C) 2003 Red Hat - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/ide.h> -#include <linux/init.h> - -#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 - -#define SCC_PATA_NAME "scc IDE" - -#define TDVHSEL_MASTER 0x00000001 -#define TDVHSEL_SLAVE 0x00000004 - -#define MODE_JCUSFEN 0x00000080 - -#define CCKCTRL_ATARESET 0x00040000 -#define CCKCTRL_BUFCNT 0x00020000 -#define CCKCTRL_CRST 0x00010000 -#define CCKCTRL_OCLKEN 0x00000100 -#define CCKCTRL_ATACLKOEN 0x00000002 -#define CCKCTRL_LCLKEN 0x00000001 - -#define QCHCD_IOS_SS 0x00000001 - -#define QCHSD_STPDIAG 0x00020000 - -#define INTMASK_MSK 0xD1000012 -#define INTSTS_SERROR 0x80000000 -#define INTSTS_PRERR 0x40000000 -#define INTSTS_RERR 0x10000000 -#define INTSTS_ICERR 0x01000000 -#define INTSTS_BMSINT 0x00000010 -#define INTSTS_BMHE 0x00000008 -#define INTSTS_IOIRQS 0x00000004 -#define INTSTS_INTRQ 0x00000002 -#define INTSTS_ACTEINT 0x00000001 - -#define ECMODE_VALUE 0x01 - -static struct scc_ports { - unsigned long ctl, dma; - struct ide_host *host; /* for removing port from system */ -} scc_ports[MAX_HWIFS]; - -/* PIO transfer mode table */ -/* JCHST */ -static unsigned long JCHSTtbl[2][7] = { - {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHHT */ -static unsigned long JCHHTtbl[2][7] = { - {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */ - {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */ -}; - -/* JCHCT */ -static unsigned long JCHCTtbl[2][7] = { - {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */ - {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */ -}; - - -/* DMA transfer mode table */ -/* JCHDCTM/JCHDCTS */ -static unsigned long JCHDCTxtbl[2][7] = { - {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */ - {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */ -}; - -/* JCSTWTM/JCSTWTS */ -static unsigned long JCSTWTxtbl[2][7] = { - {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */ - {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCTSS */ -static unsigned long JCTSStbl[2][7] = { - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */ - {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */ -}; - -/* JCENVT */ -static unsigned long JCENVTtbl[2][7] = { - {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */ -}; - -/* JCACTSELS/JCACTSELM */ -static unsigned long JCACTSELtbl[2][7] = { - {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */ - {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */ -}; - - -static u8 scc_ide_inb(unsigned long port) -{ - u32 data = in_be32((void*)port); - return (u8)data; -} - -static void scc_exec_command(ide_hwif_t *hwif, u8 cmd) -{ - out_be32((void *)hwif->io_ports.command_addr, cmd); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static u8 scc_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.status_addr); -} - -static u8 scc_read_altstatus(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)hwif->io_ports.ctl_addr); -} - -static u8 scc_dma_sff_read_status(ide_hwif_t *hwif) -{ - return (u8)in_be32((void *)(hwif->dma_base + 4)); -} - -static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl) -{ - out_be32((void *)hwif->io_ports.ctl_addr, ctl); - eieio(); - in_be32((void *)(hwif->dma_base + 0x01c)); - eieio(); -} - -static void scc_ide_insw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_insl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - *ptr++ = le16_to_cpu(in_be32((void*)port)); - *ptr++ = le16_to_cpu(in_be32((void*)port)); - } -} - -static void scc_ide_outb(u8 addr, unsigned long port) -{ - out_be32((void*)port, addr); -} - -static void -scc_ide_outsw(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -static void -scc_ide_outsl(unsigned long port, void *addr, u32 count) -{ - u16 *ptr = (u16 *)addr; - while (count--) { - out_be32((void*)port, cpu_to_le16(*ptr++)); - out_be32((void*)port, cpu_to_le16(*ptr++)); - } -} - -/** - * scc_set_pio_mode - set host controller for PIO mode - * @hwif: port - * @drive: drive - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long piosht_port = ctl_base + 0x000; - unsigned long pioct_port = ctl_base + 0x004; - unsigned long reg; - int offset; - const u8 pio = drive->pio_mode - XFER_PIO_0; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio]; - out_be32((void __iomem *)piosht_port, reg); - reg = JCHCTtbl[offset][pio]; - out_be32((void __iomem *)pioct_port, reg); -} - -/** - * scc_set_dma_mode - set host controller for DMA mode - * @hwif: port - * @drive: drive - * - * Load the timing settings for this device mode into the - * controller. - */ - -static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) -{ - struct scc_ports *ports = ide_get_hwifdata(hwif); - unsigned long ctl_base = ports->ctl; - unsigned long cckctrl_port = ctl_base + 0xff0; - unsigned long mdmact_port = ctl_base + 0x008; - unsigned long mcrcst_port = ctl_base + 0x00c; - unsigned long sdmact_port = ctl_base + 0x010; - unsigned long scrcst_port = ctl_base + 0x014; - unsigned long udenvt_port = ctl_base + 0x018; - unsigned long tdvhsel_port = ctl_base + 0x020; - int is_slave = drive->dn & 1; - int offset, idx; - unsigned long reg; - unsigned long jcactsel; - const u8 speed = drive->dma_mode; - - reg = in_be32((void __iomem *)cckctrl_port); - if (reg & CCKCTRL_ATACLKOEN) { - offset = 1; /* 133MHz */ - } else { - offset = 0; /* 100MHz */ - } - - idx = speed - XFER_UDMA_0; - - jcactsel = JCACTSELtbl[offset][idx]; - if (is_slave) { - out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]); - jcactsel = jcactsel << 2; - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel); - } else { - out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]); - out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]); - out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel); - } - reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx]; - out_be32((void __iomem *)udenvt_port, reg); -} - -static void scc_dma_host_set(ide_drive_t *drive, int on) -{ - ide_hwif_t *hwif = drive->hwif; - u8 unit = drive->dn & 1; - u8 dma_stat = scc_dma_sff_read_status(hwif); - - if (on) - dma_stat |= (1 << (5 + unit)); - else - dma_stat &= ~(1 << (5 + unit)); - - scc_ide_outb(dma_stat, hwif->dma_base + 4); -} - -/** - * scc_dma_setup - begin a DMA phase - * @drive: target device - * @cmd: command - * - * Build an IDE DMA PRD (IDE speak for scatter gather table) - * and then set up the DMA transfer registers. - * - * Returns 0 on success. If a PIO fallback is required then 1 - * is returned. - */ - -static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) -{ - ide_hwif_t *hwif = drive->hwif; - u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR; - u8 dma_stat; - - /* fall back to pio! */ - if (ide_build_dmatable(drive, cmd) == 0) - return 1; - - /* PRD table */ - out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma); - - /* specify r/w */ - out_be32((void __iomem *)hwif->dma_base, rw); - - /* read DMA status for INTR & ERROR flags */ - dma_stat = scc_dma_sff_read_status(hwif); - - /* clear INTR & ERROR flags */ - out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6); - - return 0; -} - -static void scc_dma_start(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_cmd = scc_ide_inb(hwif->dma_base); - - /* start DMA */ - scc_ide_outb(dma_cmd | 1, hwif->dma_base); -} - -static int __scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 dma_stat, dma_cmd; - - /* get DMA command mode */ - dma_cmd = scc_ide_inb(hwif->dma_base); - /* stop DMA */ - scc_ide_outb(dma_cmd & ~1, hwif->dma_base); - /* get DMA status */ - dma_stat = scc_dma_sff_read_status(hwif); - /* clear the INTR & ERROR bits */ - scc_ide_outb(dma_stat | 6, hwif->dma_base + 4); - /* verify good DMA status */ - return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; -} - -/** - * scc_dma_end - Stop DMA - * @drive: IDE drive - * - * Check and clear INT Status register. - * Then call __scc_dma_end(). - */ - -static int scc_dma_end(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - void __iomem *dma_base = (void __iomem *)hwif->dma_base; - unsigned long intsts_port = hwif->dma_base + 0x014; - u32 reg; - int dma_stat, data_loss = 0; - static int retry = 0; - - /* errata A308 workaround: Step5 (check data loss) */ - /* We don't check non ide_disk because it is limited to UDMA4 */ - if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) { - reg = in_be32((void __iomem *)intsts_port); - if (!(reg & INTSTS_ACTEINT)) { - printk(KERN_WARNING "%s: operation failed (transfer data loss)\n", - drive->name); - data_loss = 1; - if (retry++) { - struct request *rq = hwif->rq; - ide_drive_t *drive; - int i; - - /* ERROR_RESET and drive->crc_count are needed - * to reduce DMA transfer mode in retry process. - */ - if (rq) - rq->errors |= ERROR_RESET; - - ide_port_for_each_dev(i, drive, hwif) - drive->crc_count++; - } - } - } - - while (1) { - reg = in_be32((void __iomem *)intsts_port); - - if (reg & INTSTS_SERROR) { - printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_PRERR) { - u32 maea0, maec0; - unsigned long ctl_base = hwif->config_data; - - maea0 = in_be32((void __iomem *)(ctl_base + 0xF50)); - maec0 = in_be32((void __iomem *)(ctl_base + 0xF54)); - - printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0); - - out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_RERR) { - printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT); - - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - continue; - } - - if (reg & INTSTS_ICERR) { - out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS); - - printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT); - continue; - } - - if (reg & INTSTS_BMSINT) { - printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME); - out_be32((void __iomem *)intsts_port, INTSTS_BMSINT); - - ide_do_reset(drive); - continue; - } - - if (reg & INTSTS_BMHE) { - out_be32((void __iomem *)intsts_port, INTSTS_BMHE); - continue; - } - - if (reg & INTSTS_ACTEINT) { - out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT); - continue; - } - - if (reg & INTSTS_IOIRQS) { - out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS); - continue; - } - break; - } - - dma_stat = __scc_dma_end(drive); - if (data_loss) - dma_stat |= 2; /* emulate DMA error (to retry command) */ - return dma_stat; -} - -/* returns 1 if dma irq issued, 0 otherwise */ -static int scc_dma_test_irq(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014); - - /* SCC errata A252,A308 workaround: Step4 */ - if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr) - & ATA_ERR) && - (int_stat & INTSTS_INTRQ)) - return 1; - - /* SCC errata A308 workaround: Step5 (polling IOIRQS) */ - if (int_stat & INTSTS_IOIRQS) - return 1; - - return 0; -} - -static u8 scc_udma_filter(ide_drive_t *drive) -{ - ide_hwif_t *hwif = drive->hwif; - u8 mask = hwif->ultra_mask; - - /* errata A308 workaround: limit non ide_disk drive to UDMA4 */ - if ((drive->media != ide_disk) && (mask & 0xE0)) { - printk(KERN_INFO "%s: limit %s to UDMA4\n", - SCC_PATA_NAME, drive->name); - mask = ATA_UDMA4; - } - - return mask; -} - -/** - * setup_mmio_scc - map CTRL/BMID region - * @dev: PCI device we are configuring - * @name: device name - * - */ - -static int setup_mmio_scc (struct pci_dev *dev, const char *name) -{ - void __iomem *ctl_addr; - void __iomem *dma_addr; - int i, ret; - - for (i = 0; i < MAX_HWIFS; i++) { - if (scc_ports[i].ctl == 0) - break; - } - if (i >= MAX_HWIFS) - return -ENOMEM; - - ret = pci_request_selected_regions(dev, (1 << 2) - 1, name); - if (ret < 0) { - printk(KERN_ERR "%s: can't reserve resources\n", name); - return ret; - } - - ctl_addr = pci_ioremap_bar(dev, 0); - if (!ctl_addr) - goto fail_0; - - dma_addr = pci_ioremap_bar(dev, 1); - if (!dma_addr) - goto fail_1; - - pci_set_master(dev); - scc_ports[i].ctl = (unsigned long)ctl_addr; - scc_ports[i].dma = (unsigned long)dma_addr; - pci_set_drvdata(dev, (void *) &scc_ports[i]); - - return 1; - - fail_1: - iounmap(ctl_addr); - fail_0: - return -ENOMEM; -} - -static int scc_ide_setup_pci_device(struct pci_dev *dev, - const struct ide_port_info *d) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host; - struct ide_hw hw, *hws[] = { &hw }; - int i, rc; - - memset(&hw, 0, sizeof(hw)); - for (i = 0; i <= 8; i++) - hw.io_ports_array[i] = ports->dma + 0x20 + i * 4; - hw.irq = dev->irq; - hw.dev = &dev->dev; - - rc = ide_host_add(d, hws, 1, &host); - if (rc) - return rc; - - ports->host = host; - - return 0; -} - -/** - * init_setup_scc - set up an SCC PATA Controller - * @dev: PCI device - * @d: IDE port info - * - * Perform the initial set up for this device. - */ - -static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d) -{ - unsigned long ctl_base; - unsigned long dma_base; - unsigned long cckctrl_port; - unsigned long intmask_port; - unsigned long mode_port; - unsigned long ecmode_port; - u32 reg = 0; - struct scc_ports *ports; - int rc; - - rc = pci_enable_device(dev); - if (rc) - goto end; - - rc = setup_mmio_scc(dev, d->name); - if (rc < 0) - goto end; - - ports = pci_get_drvdata(dev); - ctl_base = ports->ctl; - dma_base = ports->dma; - cckctrl_port = ctl_base + 0xff0; - intmask_port = dma_base + 0x010; - mode_port = ctl_base + 0x024; - ecmode_port = ctl_base + 0xf00; - - /* controller initialization */ - reg = 0; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_ATACLKOEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN; - out_be32((void*)cckctrl_port, reg); - reg |= CCKCTRL_CRST; - out_be32((void*)cckctrl_port, reg); - - for (;;) { - reg = in_be32((void*)cckctrl_port); - if (reg & CCKCTRL_CRST) - break; - udelay(5000); - } - - reg |= CCKCTRL_ATARESET; - out_be32((void*)cckctrl_port, reg); - - out_be32((void*)ecmode_port, ECMODE_VALUE); - out_be32((void*)mode_port, MODE_JCUSFEN); - out_be32((void*)intmask_port, INTMASK_MSK); - - rc = scc_ide_setup_pci_device(dev, d); - - end: - return rc; -} - -static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - - if (valid & IDE_VALID_FEATURE) - scc_ide_outb(tf->feature, io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - scc_ide_outb(tf->nsect, io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - scc_ide_outb(tf->lbal, io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - scc_ide_outb(tf->lbam, io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - scc_ide_outb(tf->lbah, io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - scc_ide_outb(tf->device, io_ports->device_addr); -} - -static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) -{ - struct ide_io_ports *io_ports = &drive->hwif->io_ports; - - if (valid & IDE_VALID_ERROR) - tf->error = scc_ide_inb(io_ports->feature_addr); - if (valid & IDE_VALID_NSECT) - tf->nsect = scc_ide_inb(io_ports->nsect_addr); - if (valid & IDE_VALID_LBAL) - tf->lbal = scc_ide_inb(io_ports->lbal_addr); - if (valid & IDE_VALID_LBAM) - tf->lbam = scc_ide_inb(io_ports->lbam_addr); - if (valid & IDE_VALID_LBAH) - tf->lbah = scc_ide_inb(io_ports->lbah_addr); - if (valid & IDE_VALID_DEVICE) - tf->device = scc_ide_inb(io_ports->device_addr); -} - -static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_insl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_insw(data_addr, buf, len / 2); -} - -static void scc_output_data(ide_drive_t *drive, struct ide_cmd *cmd, - void *buf, unsigned int len) -{ - unsigned long data_addr = drive->hwif->io_ports.data_addr; - - len++; - - if (drive->io_32bit) { - scc_ide_outsl(data_addr, buf, len / 4); - - if ((len & 3) >= 2) - scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1); - } else - scc_ide_outsw(data_addr, buf, len / 2); -} - -/** - * init_mmio_iops_scc - set up the iops for MMIO - * @hwif: interface to set up - * - */ - -static void init_mmio_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct scc_ports *ports = pci_get_drvdata(dev); - unsigned long dma_base = ports->dma; - - ide_set_hwifdata(hwif, ports); - - hwif->dma_base = dma_base; - hwif->config_data = ports->ctl; -} - -/** - * init_iops_scc - set up iops - * @hwif: interface to set up - * - * Do the basic setup for the SCC hardware interface - * and then do the MMIO setup. - */ - -static void init_iops_scc(ide_hwif_t *hwif) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - - hwif->hwif_data = NULL; - if (pci_get_drvdata(dev) == NULL) - return; - init_mmio_iops_scc(hwif); -} - -static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d) -{ - return ide_allocate_dma_engine(hwif); -} - -static u8 scc_cable_detect(ide_hwif_t *hwif) -{ - return ATA_CBL_PATA80; -} - -/** - * init_hwif_scc - set up hwif - * @hwif: interface to set up - * - * We do the basic set up of the interface structure. The SCC - * requires several custom handlers so we override the default - * ide DMA handlers appropriately. - */ - -static void init_hwif_scc(ide_hwif_t *hwif) -{ - /* PTERADD */ - out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma); - - if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) - hwif->ultra_mask = ATA_UDMA6; /* 133MHz */ - else - hwif->ultra_mask = ATA_UDMA5; /* 100MHz */ -} - -static const struct ide_tp_ops scc_tp_ops = { - .exec_command = scc_exec_command, - .read_status = scc_read_status, - .read_altstatus = scc_read_altstatus, - .write_devctl = scc_write_devctl, - - .dev_select = ide_dev_select, - .tf_load = scc_tf_load, - .tf_read = scc_tf_read, - - .input_data = scc_input_data, - .output_data = scc_output_data, -}; - -static const struct ide_port_ops scc_port_ops = { - .set_pio_mode = scc_set_pio_mode, - .set_dma_mode = scc_set_dma_mode, - .udma_filter = scc_udma_filter, - .cable_detect = scc_cable_detect, -}; - -static const struct ide_dma_ops scc_dma_ops = { - .dma_host_set = scc_dma_host_set, - .dma_setup = scc_dma_setup, - .dma_start = scc_dma_start, - .dma_end = scc_dma_end, - .dma_test_irq = scc_dma_test_irq, - .dma_lost_irq = ide_dma_lost_irq, - .dma_timer_expiry = ide_dma_sff_timer_expiry, - .dma_sff_read_status = scc_dma_sff_read_status, -}; - -static const struct ide_port_info scc_chipset = { - .name = "sccIDE", - .init_iops = init_iops_scc, - .init_dma = scc_init_dma, - .init_hwif = init_hwif_scc, - .tp_ops = &scc_tp_ops, - .port_ops = &scc_port_ops, - .dma_ops = &scc_dma_ops, - .host_flags = IDE_HFLAG_SINGLE, - .irq_flags = IRQF_SHARED, - .pio_mask = ATA_PIO4, - .chipset = ide_pci, -}; - -/** - * scc_init_one - pci layer discovery entry - * @dev: PCI device - * @id: ident table entry - * - * Called by the PCI code when it finds an SCC PATA controller. - * We then use the IDE PCI generic helper to do most of the work. - */ - -static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - return init_setup_scc(dev, &scc_chipset); -} - -/** - * scc_remove - pci layer remove entry - * @dev: PCI device - * - * Called by the PCI code when it removes an SCC PATA controller. - */ - -static void scc_remove(struct pci_dev *dev) -{ - struct scc_ports *ports = pci_get_drvdata(dev); - struct ide_host *host = ports->host; - - ide_host_remove(host); - - iounmap((void*)ports->dma); - iounmap((void*)ports->ctl); - pci_release_selected_regions(dev, (1 << 2) - 1); - memset(ports, 0, sizeof(*ports)); -} - -static const struct pci_device_id scc_pci_tbl[] = { - { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, scc_pci_tbl); - -static struct pci_driver scc_pci_driver = { - .name = "SCC IDE", - .id_table = scc_pci_tbl, - .probe = scc_init_one, - .remove = scc_remove, -}; - -static int __init scc_ide_init(void) -{ - return ide_pci_register_driver(&scc_pci_driver); -} - -static void __exit scc_ide_exit(void) -{ - pci_unregister_driver(&scc_pci_driver); -} - -module_init(scc_ide_init); -module_exit(scc_ide_exit); - -MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); -MODULE_LICENSE("GPL"); |