summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig20
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-at91.c1
-rw-r--r--drivers/i2c/busses/i2c-highlander.c498
-rw-r--r--drivers/i2c/busses/i2c-mpc.c1
-rw-r--r--drivers/i2c/busses/i2c-omap.c12
-rw-r--r--drivers/i2c/busses/i2c-parport-light.c39
-rw-r--r--drivers/i2c/busses/i2c-pca-isa.c22
-rw-r--r--drivers/i2c/busses/i2c-powermac.c33
-rw-r--r--drivers/i2c/busses/i2c-pxa.c94
-rw-r--r--drivers/i2c/busses/i2c-sh_mobile.c271
-rw-r--r--drivers/i2c/busses/i2c-viapro.c17
12 files changed, 884 insertions, 125 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6ee997b2817c..acadbc51fc0f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -55,7 +55,7 @@ config I2C_AMD756
config I2C_AMD756_S4882
tristate "SMBus multiplexing on the Tyan S4882"
- depends on I2C_AMD756 && EXPERIMENTAL
+ depends on I2C_AMD756 && X86 && EXPERIMENTAL
help
Enabling this option will add specific SMBus support for the Tyan
S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
@@ -148,7 +148,7 @@ config I2C_NFORCE2
config I2C_NFORCE2_S4985
tristate "SMBus multiplexing on the Tyan S4985"
- depends on I2C_NFORCE2 && EXPERIMENTAL
+ depends on I2C_NFORCE2 && X86 && EXPERIMENTAL
help
Enabling this option will add specific SMBus support for the Tyan
S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed
@@ -209,7 +209,7 @@ config I2C_VIA
will be called i2c-via.
config I2C_VIAPRO
- tristate "VIA VT82C596/82C686/82xx and CX700"
+ tristate "VIA VT82C596/82C686/82xx and CX700/VX800/VX820"
depends on PCI
help
If you say yes to this option, support will be included for the VIA
@@ -223,6 +223,8 @@ config I2C_VIAPRO
VT8237R/A/S
VT8251
CX700
+ VX800
+ VX820
This driver can also be built as a module. If so, the module
will be called i2c-viapro.
@@ -330,6 +332,18 @@ config I2C_GPIO
This is a very simple bitbanging I2C driver utilizing the
arch-neutral GPIO API to control the SCL and SDA lines.
+config I2C_HIGHLANDER
+ tristate "Highlander FPGA SMBus interface"
+ depends on SH_HIGHLANDER
+ help
+ If you say yes to this option, support will be included for
+ the SMBus interface located in the FPGA on various Highlander
+ boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL
+ FPGAs. This is wholly unrelated to the SoC I2C.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-highlander.
+
config I2C_IBM_IIC
tristate "IBM PPC 4xx on-chip I2C interface"
depends on 4xx
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 97dbfa2107fe..0c2c4b26cdf1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
+obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index c1adcdbf7979..9efb02137254 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -14,7 +14,6 @@
*/
#include <linux/module.h>
-#include <linux/version.h>
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/slab.h>
diff --git a/drivers/i2c/busses/i2c-highlander.c b/drivers/i2c/busses/i2c-highlander.c
new file mode 100644
index 000000000000..f4d22ae9d294
--- /dev/null
+++ b/drivers/i2c/busses/i2c-highlander.c
@@ -0,0 +1,498 @@
+/*
+ * Renesas Solutions Highlander FPGA I2C/SMBus support.
+ *
+ * Supported devices: R0P7780LC0011RL, R0P7785LC0011RL
+ *
+ * Copyright (C) 2008 Paul Mundt
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Atom Create Engineering Co., Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License version 2. See the file "COPYING" in the main directory
+ * of this archive for more details.
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#define SMCR 0x00
+#define SMCR_START (1 << 0)
+#define SMCR_IRIC (1 << 1)
+#define SMCR_BBSY (1 << 2)
+#define SMCR_ACKE (1 << 3)
+#define SMCR_RST (1 << 4)
+#define SMCR_IEIC (1 << 6)
+
+#define SMSMADR 0x02
+
+#define SMMR 0x04
+#define SMMR_MODE0 (1 << 0)
+#define SMMR_MODE1 (1 << 1)
+#define SMMR_CAP (1 << 3)
+#define SMMR_TMMD (1 << 4)
+#define SMMR_SP (1 << 7)
+
+#define SMSADR 0x06
+#define SMTRDR 0x46
+
+struct highlander_i2c_dev {
+ struct device *dev;
+ void __iomem *base;
+ struct i2c_adapter adapter;
+ struct completion cmd_complete;
+ unsigned long last_read_time;
+ int irq;
+ u8 *buf;
+ size_t buf_len;
+};
+
+static int iic_force_poll, iic_force_normal;
+static int iic_timeout = 1000, iic_read_delay;
+
+static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev)
+{
+ iowrite16(ioread16(dev->base + SMCR) | SMCR_IEIC, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_irq_disable(struct highlander_i2c_dev *dev)
+{
+ iowrite16(ioread16(dev->base + SMCR) & ~SMCR_IEIC, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_start(struct highlander_i2c_dev *dev)
+{
+ iowrite16(ioread16(dev->base + SMCR) | SMCR_START, dev->base + SMCR);
+}
+
+static inline void highlander_i2c_done(struct highlander_i2c_dev *dev)
+{
+ iowrite16(ioread16(dev->base + SMCR) | SMCR_IRIC, dev->base + SMCR);
+}
+
+static void highlander_i2c_setup(struct highlander_i2c_dev *dev)
+{
+ u16 smmr;
+
+ smmr = ioread16(dev->base + SMMR);
+ smmr |= SMMR_TMMD;
+
+ if (iic_force_normal)
+ smmr &= ~SMMR_SP;
+ else
+ smmr |= SMMR_SP;
+
+ iowrite16(smmr, dev->base + SMMR);
+}
+
+static void smbus_write_data(u8 *src, u16 *dst, int len)
+{
+ for (; len > 1; len -= 2) {
+ *dst++ = be16_to_cpup((u16 *)src);
+ src += 2;
+ }
+
+ if (len)
+ *dst = *src << 8;
+}
+
+static void smbus_read_data(u16 *src, u8 *dst, int len)
+{
+ for (; len > 1; len -= 2) {
+ *(u16 *)dst = cpu_to_be16p(src++);
+ dst += 2;
+ }
+
+ if (len)
+ *dst = *src >> 8;
+}
+
+static void highlander_i2c_command(struct highlander_i2c_dev *dev,
+ u8 command, int len)
+{
+ unsigned int i;
+ u16 cmd = (command << 8) | command;
+
+ for (i = 0; i < len; i += 2) {
+ if (len - i == 1)
+ cmd = command << 8;
+ iowrite16(cmd, dev->base + SMSADR + i);
+ dev_dbg(dev->dev, "command data[%x] 0x%04x\n", i/2, cmd);
+ }
+}
+
+static int highlander_i2c_wait_for_bbsy(struct highlander_i2c_dev *dev)
+{
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(iic_timeout);
+ while (ioread16(dev->base + SMCR) & SMCR_BBSY) {
+ if (time_after(jiffies, timeout)) {
+ dev_warn(dev->dev, "timeout waiting for bus ready\n");
+ return -ETIMEDOUT;
+ }
+
+ msleep(1);
+ }
+
+ return 0;
+}
+
+static int highlander_i2c_reset(struct highlander_i2c_dev *dev)
+{
+ iowrite16(ioread16(dev->base + SMCR) | SMCR_RST, dev->base + SMCR);
+ return highlander_i2c_wait_for_bbsy(dev);
+}
+
+static int highlander_i2c_wait_for_ack(struct highlander_i2c_dev *dev)
+{
+ u16 tmp = ioread16(dev->base + SMCR);
+
+ if ((tmp & (SMCR_IRIC | SMCR_ACKE)) == SMCR_ACKE) {
+ dev_warn(dev->dev, "ack abnormality\n");
+ return highlander_i2c_reset(dev);
+ }
+
+ return 0;
+}
+
+static irqreturn_t highlander_i2c_irq(int irq, void *dev_id)
+{
+ struct highlander_i2c_dev *dev = dev_id;
+
+ highlander_i2c_done(dev);
+ complete(&dev->cmd_complete);
+
+ return IRQ_HANDLED;
+}
+
+static void highlander_i2c_poll(struct highlander_i2c_dev *dev)
+{
+ unsigned long timeout;
+ u16 smcr;
+
+ timeout = jiffies + msecs_to_jiffies(iic_timeout);
+ for (;;) {
+ smcr = ioread16(dev->base + SMCR);
+
+ /*
+ * Don't bother checking ACKE here, this and the reset
+ * are handled in highlander_i2c_wait_xfer_done() when
+ * waiting for the ACK.
+ */
+
+ if (smcr & SMCR_IRIC)
+ return;
+ if (time_after(jiffies, timeout))
+ break;
+
+ cpu_relax();
+ cond_resched();
+ }
+
+ dev_err(dev->dev, "polling timed out\n");
+}
+
+static inline int highlander_i2c_wait_xfer_done(struct highlander_i2c_dev *dev)
+{
+ if (dev->irq)
+ wait_for_completion_timeout(&dev->cmd_complete,
+ msecs_to_jiffies(iic_timeout));
+ else
+ /* busy looping, the IRQ of champions */
+ highlander_i2c_poll(dev);
+
+ return highlander_i2c_wait_for_ack(dev);
+}
+
+static int highlander_i2c_read(struct highlander_i2c_dev *dev)
+{
+ int i, cnt;
+ u16 data[16];
+
+ if (highlander_i2c_wait_for_bbsy(dev))
+ return -EAGAIN;
+
+ highlander_i2c_start(dev);
+
+ if (highlander_i2c_wait_xfer_done(dev)) {
+ dev_err(dev->dev, "Arbitration loss\n");
+ return -EAGAIN;
+ }
+
+ /*
+ * The R0P7780LC0011RL FPGA needs a significant delay between
+ * data read cycles, otherwise the transciever gets confused and
+ * garbage is returned when the read is subsequently aborted.
+ *
+ * It is not sufficient to wait for BBSY.
+ *
+ * While this generally only applies to the older SH7780-based
+ * Highlanders, the same issue can be observed on SH7785 ones,
+ * albeit less frequently. SH7780-based Highlanders may need
+ * this to be as high as 1000 ms.
+ */
+ if (iic_read_delay && time_before(jiffies, dev->last_read_time +
+ msecs_to_jiffies(iic_read_delay)))
+ msleep(jiffies_to_msecs((dev->last_read_time +
+ msecs_to_jiffies(iic_read_delay)) - jiffies));
+
+ cnt = (dev->buf_len + 1) >> 1;
+ for (i = 0; i < cnt; i++) {
+ data[i] = ioread16(dev->base + SMTRDR + (i * sizeof(u16)));
+ dev_dbg(dev->dev, "read data[%x] 0x%04x\n", i, data[i]);
+ }
+
+ smbus_read_data(data, dev->buf, dev->buf_len);
+
+ dev->last_read_time = jiffies;
+
+ return 0;
+}
+
+static int highlander_i2c_write(struct highlander_i2c_dev *dev)
+{
+ int i, cnt;
+ u16 data[16];
+
+ smbus_write_data(dev->buf, data, dev->buf_len);
+
+ cnt = (dev->buf_len + 1) >> 1;
+ for (i = 0; i < cnt; i++) {
+ iowrite16(data[i], dev->base + SMTRDR + (i * sizeof(u16)));
+ dev_dbg(dev->dev, "write data[%x] 0x%04x\n", i, data[i]);
+ }
+
+ if (highlander_i2c_wait_for_bbsy(dev))
+ return -EAGAIN;
+
+ highlander_i2c_start(dev);
+
+ return highlander_i2c_wait_xfer_done(dev);
+}
+
+static int highlander_i2c_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size,
+ union i2c_smbus_data *data)
+{
+ struct highlander_i2c_dev *dev = i2c_get_adapdata(adap);
+ int read = read_write & I2C_SMBUS_READ;
+ u16 tmp;
+
+ init_completion(&dev->cmd_complete);
+
+ dev_dbg(dev->dev, "addr %04x, command %02x, read_write %d, size %d\n",
+ addr, command, read_write, size);
+
+ /*
+ * Set up the buffer and transfer size
+ */
+ switch (size) {
+ case I2C_SMBUS_BYTE_DATA:
+ dev->buf = &data->byte;
+ dev->buf_len = 1;
+ break;
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ dev->buf = &data->block[1];
+ dev->buf_len = data->block[0];
+ break;
+ default:
+ dev_err(dev->dev, "unsupported command %d\n", size);
+ return -EINVAL;
+ }
+
+ /*
+ * Encode the mode setting
+ */
+ tmp = ioread16(dev->base + SMMR);
+ tmp &= ~(SMMR_MODE0 | SMMR_MODE1);
+
+ switch (dev->buf_len) {
+ case 1:
+ /* default */
+ break;
+ case 8:
+ tmp |= SMMR_MODE0;
+ break;
+ case 16:
+ tmp |= SMMR_MODE1;
+ break;
+ case 32:
+ tmp |= (SMMR_MODE0 | SMMR_MODE1);
+ break;
+ default:
+ dev_err(dev->dev, "unsupported xfer size %d\n", dev->buf_len);
+ return -EINVAL;
+ }
+
+ iowrite16(tmp, dev->base + SMMR);
+
+ /* Ensure we're in a sane state */
+ highlander_i2c_done(dev);
+
+ /* Set slave address */
+ iowrite16((addr << 1) | read, dev->base + SMSMADR);
+
+ highlander_i2c_command(dev, command, dev->buf_len);
+
+ if (read)
+ return highlander_i2c_read(dev);
+ else
+ return highlander_i2c_write(dev);
+}
+
+static u32 highlander_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm highlander_i2c_algo = {
+ .smbus_xfer = highlander_i2c_smbus_xfer,
+ .functionality = highlander_i2c_func,
+};
+
+static int __devinit highlander_i2c_probe(struct platform_device *pdev)
+{
+ struct highlander_i2c_dev *dev;
+ struct i2c_adapter *adap;
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!res)) {
+ dev_err(&pdev->dev, "no mem resource\n");
+ return -ENODEV;
+ }
+
+ dev = kzalloc(sizeof(struct highlander_i2c_dev), GFP_KERNEL);
+ if (unlikely(!dev))
+ return -ENOMEM;
+
+ dev->base = ioremap_nocache(res->start, res->end - res->start + 1);
+ if (unlikely(!dev->base)) {
+ ret = -ENXIO;
+ goto err;
+ }
+
+ dev->dev = &pdev->dev;
+ platform_set_drvdata(pdev, dev);
+
+ dev->irq = platform_get_irq(pdev, 0);
+ if (iic_force_poll)
+ dev->irq = 0;
+
+ if (dev->irq) {
+ ret = request_irq(dev->irq, highlander_i2c_irq, IRQF_DISABLED,
+ pdev->name, dev);
+ if (unlikely(ret))
+ goto err_unmap;
+
+ highlander_i2c_irq_enable(dev);
+ } else {
+ dev_notice(&pdev->dev, "no IRQ, using polling mode\n");
+ highlander_i2c_irq_disable(dev);
+ }
+
+ dev->last_read_time = jiffies; /* initial read jiffies */
+
+ highlander_i2c_setup(dev);
+
+ adap = &dev->adapter;
+ i2c_set_adapdata(adap, dev);
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_HWMON;
+ strlcpy(adap->name, "HL FPGA I2C adapter", sizeof(adap->name));
+ adap->algo = &highlander_i2c_algo;
+ adap->dev.parent = &pdev->dev;
+ adap->nr = pdev->id;
+
+ /*
+ * Reset the adapter
+ */
+ ret = highlander_i2c_reset(dev);
+ if (unlikely(ret)) {
+ dev_err(&pdev->dev, "controller didn't come up\n");
+ goto err_free_irq;
+ }
+
+ ret = i2c_add_numbered_adapter(adap);
+ if (unlikely(ret)) {
+ dev_err(&pdev->dev, "failure adding adapter\n");
+ goto err_free_irq;
+ }
+
+ return 0;
+
+err_free_irq:
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+err_unmap:
+ iounmap(dev->base);
+err:
+ kfree(dev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+static int __devexit highlander_i2c_remove(struct platform_device *pdev)
+{
+ struct highlander_i2c_dev *dev = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&dev->adapter);
+
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+
+ iounmap(dev->base);
+ kfree(dev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver highlander_i2c_driver = {
+ .driver = {
+ .name = "i2c-highlander",
+ .owner = THIS_MODULE,
+ },
+
+ .probe = highlander_i2c_probe,
+ .remove = __devexit_p(highlander_i2c_remove),
+};
+
+static int __init highlander_i2c_init(void)
+{
+ return platform_driver_register(&highlander_i2c_driver);
+}
+
+static void __exit highlander_i2c_exit(void)
+{
+ platform_driver_unregister(&highlander_i2c_driver);
+}
+
+module_init(highlander_i2c_init);
+module_exit(highlander_i2c_exit);
+
+MODULE_AUTHOR("Paul Mundt");
+MODULE_DESCRIPTION("Renesas Highlander FPGA I2C/SMBus adapter");
+MODULE_LICENSE("GPL v2");
+
+module_param(iic_force_poll, bool, 0);
+module_param(iic_force_normal, bool, 0);
+module_param(iic_timeout, int, 0);
+module_param(iic_read_delay, int, 0);
+
+MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
+MODULE_PARM_DESC(iic_force_normal,
+ "Force normal mode (100 kHz), default is fast mode (400 kHz)");
+MODULE_PARM_DESC(iic_timeout, "Set timeout value in msecs (default 1000 ms)");
+MODULE_PARM_DESC(iic_read_delay,
+ "Delay between data read cycles (default 0 ms)");
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 27443f073bc9..a9a45fcc8544 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -312,7 +312,6 @@ static struct i2c_adapter mpc_ops = {
.name = "MPC adapter",
.id = I2C_HW_MPC107,
.algo = &mpc_algo,
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
.timeout = 1,
};
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e7eb7bf9ddec..608038d64f81 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -589,11 +589,16 @@ omap_i2c_probe(struct platform_device *pdev)
dev->dev = &pdev->dev;
dev->irq = irq->start;
- dev->base = (void __iomem *) IO_ADDRESS(mem->start);
+ dev->base = ioremap(mem->start, mem->end - mem->start + 1);
+ if (!dev->base) {
+ r = -ENOMEM;
+ goto err_free_mem;
+ }
+
platform_set_drvdata(pdev, dev);
if ((r = omap_i2c_get_clocks(dev)) != 0)
- goto err_free_mem;
+ goto err_iounmap;
omap_i2c_unidle(dev);
@@ -640,6 +645,8 @@ err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_idle(dev);
omap_i2c_put_clocks(dev);
+err_iounmap:
+ iounmap(dev->base);
err_free_mem:
platform_set_drvdata(pdev, NULL);
kfree(dev);
@@ -661,6 +668,7 @@ omap_i2c_remove(struct platform_device *pdev)
i2c_del_adapter(&dev->adapter);
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
omap_i2c_put_clocks(dev);
+ iounmap(dev->base);
kfree(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, (mem->end - mem->start) + 1);
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index c6faf9bdad18..b2b8380f6602 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -123,11 +123,6 @@ static struct i2c_adapter parport_adapter = {
static int __devinit i2c_parport_probe(struct platform_device *pdev)
{
int err;
- struct resource *res;
-
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- if (!request_region(res->start, res->end - res->start + 1, DRVNAME))
- return -EBUSY;
/* Reset hardware to a sane state (SCL and SDA high) */
parport_setsda(NULL, 1);
@@ -138,29 +133,19 @@ static int __devinit i2c_parport_probe(struct platform_device *pdev)
parport_adapter.dev.parent = &pdev->dev;
err = i2c_bit_add_bus(&parport_adapter);
- if (err) {
+ if (err)
dev_err(&pdev->dev, "Unable to register with I2C\n");
- goto exit_region;
- }
- return 0;
-
-exit_region:
- release_region(res->start, res->end - res->start + 1);
return err;
}
static int __devexit i2c_parport_remove(struct platform_device *pdev)
{
- struct resource *res;
-
i2c_del_adapter(&parport_adapter);
/* Un-init if needed (power off...) */
if (adapter_parm[type].init.val)
line_set(0, &adapter_parm[type].init);
- res = platform_get_resource(pdev, IORESOURCE_IO, 0);
- release_region(res->start, res->end - res->start + 1);
return 0;
}
@@ -175,12 +160,6 @@ static struct platform_driver i2c_parport_driver = {
static int __init i2c_parport_device_add(u16 address)
{
- struct resource res = {
- .start = address,
- .end = address + 2,
- .name = DRVNAME,
- .flags = IORESOURCE_IO,
- };
int err;
pdev = platform_device_alloc(DRVNAME, -1);
@@ -190,13 +169,6 @@ static int __init i2c_parport_device_add(u16 address)
goto exit;
}
- err = platform_device_add_resources(pdev, &res, 1);
- if (err) {
- printk(KERN_ERR DRVNAME ": Device resource addition failed "
- "(%d)\n", err);
- goto exit_device_put;
- }
-
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
@@ -231,13 +203,16 @@ static int __init i2c_parport_init(void)
base = DEFAULT_BASE;
}
+ if (!request_region(base, 3, DRVNAME))
+ return -EBUSY;
+
if (!adapter_parm[type].getscl.val)
parport_algo_data.getscl = NULL;
/* Sets global pdev as a side effect */
err = i2c_parport_device_add(base);
if (err)
- goto exit;
+ goto exit_release;
err = platform_driver_register(&i2c_parport_driver);
if (err)
@@ -247,7 +222,8 @@ static int __init i2c_parport_init(void)
exit_device:
platform_device_unregister(pdev);
-exit:
+exit_release:
+ release_region(base, 3);
return err;
}
@@ -255,6 +231,7 @@ static void __exit i2c_parport_exit(void)
{
platform_driver_unregister(&i2c_parport_driver);
platform_device_unregister(pdev);
+ release_region(base, 3);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index a119784bae10..9eb76268ec78 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -36,8 +36,8 @@
#define DRIVER "i2c-pca-isa"
#define IO_SIZE 4
-static unsigned long base = 0x330;
-static int irq = 10;
+static unsigned long base;
+static int irq = -1;
/* Data sheet recommends 59kHz for 100kHz operation due to variation
* in the actual clock rate */
@@ -107,13 +107,26 @@ static struct i2c_adapter pca_isa_ops = {
.timeout = 100,
};
+static int __devinit pca_isa_match(struct device *dev, unsigned int id)
+{
+ int match = base != 0;
+
+ if (match) {
+ if (irq <= -1)
+ dev_warn(dev, "Using polling mode (specify irq)\n");
+ } else
+ dev_err(dev, "Please specify I/O base\n");
+
+ return match;
+}
+
static int __devinit pca_isa_probe(struct device *dev, unsigned int id)
{
init_waitqueue_head(&pca_wait);
dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
-#ifdef CONFIG_PPC_MERGE
+#ifdef CONFIG_PPC
if (check_legacy_ioport(base)) {
dev_err(dev, "I/O address %#08lx is not available\n", base);
goto out;
@@ -153,7 +166,7 @@ static int __devexit pca_isa_remove(struct device *dev, unsigned int id)
{
i2c_del_adapter(&pca_isa_ops);
- if (irq > 0) {
+ if (irq > -1) {
disable_irq(irq);
free_irq(irq, &pca_isa_ops);
}
@@ -163,6 +176,7 @@ static int __devexit pca_isa_remove(struct device *dev, unsigned int id)
}
static struct isa_driver pca_isa_driver = {
+ .match = pca_isa_match,
.probe = pca_isa_probe,
.remove = __devexit_p(pca_isa_remove),
.driver = {
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 22f6d5c00d80..60ca91745e55 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -180,7 +180,7 @@ static const struct i2c_algorithm i2c_powermac_algorithm = {
};
-static int i2c_powermac_remove(struct platform_device *dev)
+static int __devexit i2c_powermac_remove(struct platform_device *dev)
{
struct i2c_adapter *adapter = platform_get_drvdata(dev);
struct pmac_i2c_bus *bus = i2c_get_adapdata(adapter);
@@ -200,7 +200,7 @@ static int i2c_powermac_remove(struct platform_device *dev)
}
-static int __devexit i2c_powermac_probe(struct platform_device *dev)
+static int __devinit i2c_powermac_probe(struct platform_device *dev)
{
struct pmac_i2c_bus *bus = dev->dev.platform_data;
struct device_node *parent = NULL;
@@ -259,6 +259,35 @@ static int __devexit i2c_powermac_probe(struct platform_device *dev)
}
printk(KERN_INFO "PowerMac i2c bus %s registered\n", name);
+
+ if (!strncmp(basename, "uni-n", 5)) {
+ struct device_node *np;
+ const u32 *prop;
+ struct i2c_board_info info;
+
+ /* Instantiate I2C motion sensor if present */
+ np = of_find_node_by_name(NULL, "accelerometer");
+ if (np && of_device_is_compatible(np, "AAPL,accelerometer_1") &&
+ (prop = of_get_property(np, "reg", NULL))) {
+ int i2c_bus;
+ const char *tmp_bus;
+
+ /* look for bus either using "reg" or by path */
+ tmp_bus = strstr(np->full_name, "/i2c-bus@");
+ if (tmp_bus)
+ i2c_bus = *(tmp_bus + 9) - '0';
+ else
+ i2c_bus = ((*prop) >> 8) & 0x0f;
+
+ if (pmac_i2c_get_channel(bus) == i2c_bus) {
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = ((*prop) & 0xff) >> 1;
+ strlcpy(info.type, "ams", I2C_NAME_SIZE);
+ i2c_new_device(adapter, &info);
+ }
+ }
+ }
+
return rc;
}
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 44d838410f15..906f9b9d715d 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -38,7 +38,44 @@
#include <asm/irq.h>
#include <asm/io.h>
#include <mach/i2c.h>
-#include <mach/pxa-regs.h>
+
+/*
+ * I2C registers and bit definitions
+ */
+#define IBMR (0x00)
+#define IDBR (0x08)
+#define ICR (0x10)
+#define ISR (0x18)
+#define ISAR (0x20)
+
+#define ICR_START (1 << 0) /* start bit */
+#define ICR_STOP (1 << 1) /* stop bit */
+#define ICR_ACKNAK (1 << 2) /* send ACK(0) or NAK(1) */
+#define ICR_TB (1 << 3) /* transfer byte bit */
+#define ICR_MA (1 << 4) /* master abort */
+#define ICR_SCLE (1 << 5) /* master clock enable */
+#define ICR_IUE (1 << 6) /* unit enable */
+#define ICR_GCD (1 << 7) /* general call disable */
+#define ICR_ITEIE (1 << 8) /* enable tx interrupts */
+#define ICR_IRFIE (1 << 9) /* enable rx interrupts */
+#define ICR_BEIE (1 << 10) /* enable bus error ints */
+#define ICR_SSDIE (1 << 11) /* slave STOP detected int enable */
+#define ICR_ALDIE (1 << 12) /* enable arbitration interrupt */
+#define ICR_SADIE (1 << 13) /* slave address detected int enable */
+#define ICR_UR (1 << 14) /* unit reset */
+#define ICR_FM (1 << 15) /* fast mode */
+
+#define ISR_RWM (1 << 0) /* read/write mode */
+#define ISR_ACKNAK (1 << 1) /* ack/nak status */
+#define ISR_UB (1 << 2) /* unit busy */
+#define ISR_IBB (1 << 3) /* bus busy */
+#define ISR_SSD (1 << 4) /* slave stop detected */
+#define ISR_ALD (1 << 5) /* arbitration loss detected */
+#define ISR_ITE (1 << 6) /* tx buffer empty */
+#define ISR_IRF (1 << 7) /* rx buffer full */
+#define ISR_GCAD (1 << 8) /* general call address detected */
+#define ISR_SAD (1 << 9) /* slave address detected */
+#define ISR_BED (1 << 10) /* bus error no ACK/NAK */
struct pxa_i2c {
spinlock_t lock;
@@ -60,19 +97,21 @@ struct pxa_i2c {
u32 icrlog[32];
void __iomem *reg_base;
+ unsigned int reg_shift;
unsigned long iobase;
unsigned long iosize;
int irq;
- int use_pio;
+ unsigned int use_pio :1;
+ unsigned int fast_mode :1;
};
-#define _IBMR(i2c) ((i2c)->reg_base + 0)
-#define _IDBR(i2c) ((i2c)->reg_base + 8)
-#define _ICR(i2c) ((i2c)->reg_base + 0x10)
-#define _ISR(i2c) ((i2c)->reg_base + 0x18)
-#define _ISAR(i2c) ((i2c)->reg_base + 0x20)
+#define _IBMR(i2c) ((i2c)->reg_base + (0x0 << (i2c)->reg_shift))
+#define _IDBR(i2c) ((i2c)->reg_base + (0x4 << (i2c)->reg_shift))
+#define _ICR(i2c) ((i2c)->reg_base + (0x8 << (i2c)->reg_shift))
+#define _ISR(i2c) ((i2c)->reg_base + (0xc << (i2c)->reg_shift))
+#define _ISAR(i2c) ((i2c)->reg_base + (0x10 << (i2c)->reg_shift))
/*
* I2C Slave mode address
@@ -188,14 +227,14 @@ static inline int i2c_pxa_is_slavemode(struct pxa_i2c *i2c)
static void i2c_pxa_abort(struct pxa_i2c *i2c)
{
- unsigned long timeout = jiffies + HZ/4;
+ int i = 250;
if (i2c_pxa_is_slavemode(i2c)) {
dev_dbg(&i2c->adap.dev, "%s: called in slave mode\n", __func__);
return;
}
- while (time_before(jiffies, timeout) && (readl(_IBMR(i2c)) & 0x1) == 0) {
+ while ((i > 0) && (readl(_IBMR(i2c)) & 0x1) == 0) {
unsigned long icr = readl(_ICR(i2c));
icr &= ~ICR_START;
@@ -205,7 +244,8 @@ static void i2c_pxa_abort(struct pxa_i2c *i2c)
show_state(i2c);
- msleep(1);
+ mdelay(1);
+ i --;
}
writel(readl(_ICR(i2c)) & ~(ICR_MA | ICR_START | ICR_STOP),
@@ -364,7 +404,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
writel(i2c->slave_addr, _ISAR(i2c));
/* set control register values */
- writel(I2C_ICR_INIT, _ICR(i2c));
+ writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
#ifdef CONFIG_I2C_PXA_SLAVE
dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@@ -907,12 +947,6 @@ static int i2c_pxa_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num
struct pxa_i2c *i2c = adap->algo_data;
int ret, i;
- /* If the I2C controller is disabled we need to reset it (probably due
- to a suspend/resume destroying state). We do this here as we can then
- avoid worrying about resuming the controller before its users. */
- if (!(readl(_ICR(i2c)) & ICR_IUE))
- i2c_pxa_reset(i2c);
-
for (i = adap->retries; i >= 0; i--) {
ret = i2c_pxa_do_xfer(i2c, msgs, num);
if (ret != I2C_RETRY)
@@ -993,6 +1027,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
ret = -EIO;
goto eremap;
}
+ i2c->reg_shift = (cpu_is_pxa3xx() && (dev->id == 1)) ? 0 : 1;
i2c->iobase = res->start;
i2c->iosize = res_len(res);
@@ -1013,6 +1048,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
if (plat) {
i2c->adap.class = plat->class;
i2c->use_pio = plat->use_pio;
+ i2c->fast_mode = plat->fast_mode;
}
if (i2c->use_pio) {
@@ -1082,9 +1118,33 @@ static int __exit i2c_pxa_remove(struct platform_device *dev)
return 0;
}
+#ifdef CONFIG_PM
+static int i2c_pxa_suspend_late(struct platform_device *dev, pm_message_t state)
+{
+ struct pxa_i2c *i2c = platform_get_drvdata(dev);
+ clk_disable(i2c->clk);
+ return 0;
+}
+
+static int i2c_pxa_resume_early(struct platform_device *dev)
+{
+ struct pxa_i2c *i2c = platform_get_drvdata(dev);
+
+ clk_enable(i2c->clk);
+ i2c_pxa_reset(i2c);
+
+ return 0;
+}
+#else
+#define i2c_pxa_suspend_late NULL
+#define i2c_pxa_resume_early NULL
+#endif
+
static struct platform_driver i2c_pxa_driver = {
.probe = i2c_pxa_probe,
.remove = __exit_p(i2c_pxa_remove),
+ .suspend_late = i2c_pxa_suspend_late,
+ .resume_early = i2c_pxa_resume_early,
.driver = {
.name = "pxa2xx-i2c",
.owner = THIS_MODULE,
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 840e634fa31f..640cbb237328 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -31,13 +31,84 @@
#include <linux/clk.h>
#include <linux/io.h>
+/* Transmit operation: */
+/* */
+/* 0 byte transmit */
+/* BUS: S A8 ACK P */
+/* IRQ: DTE WAIT */
+/* ICIC: */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 */
+/* */
+/* 1 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK P */
+/* IRQ: DTE WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) */
+/* */
+/* 2 byte transmit */
+/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT WAIT WAIT */
+/* ICIC: -DTE */
+/* ICCR: 0x94 0x90 */
+/* ICDR: A8 D8(1) D8(2) */
+/* */
+/* 3 bytes or more, +---------+ gets repeated */
+/* */
+/* */
+/* Receive operation: */
+/* */
+/* 0 byte receive - not supported since slave may hold SDA low */
+/* */
+/* 1 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK P */
+/* IRQ: DTE WAIT | WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) */
+/* */
+/* 2 byte receive [TX]| [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) */
+/* */
+/* 3 byte receive [TX] | [RX] */
+/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
+/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
+/* ICIC: -DTE | +DTE */
+/* ICCR: 0x94 0x81 | 0xc0 */
+/* ICDR: A8 | D8(1) D8(2) D8(3) */
+/* */
+/* 4 bytes or more, this part is repeated +---------+ */
+/* */
+/* */
+/* Interrupt order and BUSY flag */
+/* ___ _ */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
+/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
+/* */
+/* S D7 D6 D5 D4 D3 D2 D1 D0 P */
+/* ___ */
+/* WAIT IRQ ________________________________/ \___________ */
+/* TACK IRQ ____________________________________/ \_______ */
+/* DTE IRQ __________________________________________/ \_ */
+/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
+/* _______________________________________________ */
+/* BUSY __/ \_ */
+/* */
+
enum sh_mobile_i2c_op {
OP_START = 0,
- OP_TX_ONLY,
+ OP_TX_FIRST,
+ OP_TX,
OP_TX_STOP,
OP_TX_TO_RX,
- OP_RX_ONLY,
+ OP_RX,
OP_RX_STOP,
+ OP_RX_STOP_DATA,
};
struct sh_mobile_i2c_data {
@@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
spin_lock_irqsave(&pd->lock, flags);
switch (op) {
- case OP_START:
+ case OP_START: /* issue start and trigger DTE interrupt */
iowrite8(0x94, ICCR(pd));
break;
- case OP_TX_ONLY:
+ case OP_TX_FIRST: /* disable DTE interrupt and write data */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
iowrite8(data, ICDR(pd));
break;
- case OP_TX_STOP:
+ case OP_TX: /* write data */
iowrite8(data, ICDR(pd));
- iowrite8(0x90, ICCR(pd));
- iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
break;
- case OP_TX_TO_RX:
+ case OP_TX_STOP: /* write data and issue a stop afterwards */
iowrite8(data, ICDR(pd));
+ iowrite8(0x90, ICCR(pd));
+ break;
+ case OP_TX_TO_RX: /* select read mode */
iowrite8(0x81, ICCR(pd));
break;
- case OP_RX_ONLY:
+ case OP_RX: /* just read data */
ret = ioread8(ICDR(pd));
break;
- case OP_RX_STOP:
+ case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
+ iowrite8(0xc0, ICCR(pd));
+ break;
+ case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+ iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+ ICIC(pd));
ret = ioread8(ICDR(pd));
iowrite8(0xc0, ICCR(pd));
break;
@@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
return ret;
}
+static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == -1)
+ return 1;
+
+ return 0;
+}
+
+static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+ if (pd->pos == (pd->msg->len - 1))
+ return 1;
+
+ return 0;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+ unsigned char *buf)
+{
+ switch (pd->pos) {
+ case -1:
+ *buf = (pd->msg->addr & 0x7f) << 1;
+ *buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+ break;
+ default:
+ *buf = pd->msg->buf[pd->pos];
+ }
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+
+ if (pd->pos == pd->msg->len)
+ return 1;
+
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_last_byte(pd))
+ i2c_op(pd, OP_TX_STOP, data);
+ else if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+
+ pd->pos++;
+ return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+ unsigned char data;
+ int real_pos;
+
+ do {
+ if (pd->pos <= -1) {
+ sh_mobile_i2c_get_data(pd, &data);
+
+ if (sh_mobile_i2c_is_first_byte(pd))
+ i2c_op(pd, OP_TX_FIRST, data);
+ else
+ i2c_op(pd, OP_TX, data);
+ break;
+ }
+
+ if (pd->pos == 0) {
+ i2c_op(pd, OP_TX_TO_RX, 0);
+ break;
+ }
+
+ real_pos = pd->pos - 2;
+
+ if (pd->pos == pd->msg->len) {
+ if (real_pos < 0) {
+ i2c_op(pd, OP_RX_STOP, 0);
+ break;
+ }
+ data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+ } else
+ data = i2c_op(pd, OP_RX, 0);
+
+ pd->msg->buf[real_pos] = data;
+ } while (0);
+
+ pd->pos++;
+ return pd->pos == (pd->msg->len + 2);
+}
+
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
{
struct platform_device *dev = dev_id;
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
- struct i2c_msg *msg = pd->msg;
- unsigned char data, sr;
- int wakeup = 0;
+ unsigned char sr;
+ int wakeup;
sr = ioread8(ICSR(pd));
- pd->sr |= sr;
+ pd->sr |= sr; /* remember state */
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
- (msg->flags & I2C_M_RD) ? "read" : "write",
- pd->pos, msg->len);
+ (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+ pd->pos, pd->msg->len);
if (sr & (ICSR_AL | ICSR_TACK)) {
- iowrite8(0, ICIC(pd)); /* disable interrupts */
- wakeup = 1;
- goto do_wakeup;
- }
+ /* don't interrupt transaction - continue to issue stop */
+ iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+ wakeup = 0;
+ } else if (pd->msg->flags & I2C_M_RD)
+ wakeup = sh_mobile_i2c_isr_rx(pd);
+ else
+ wakeup = sh_mobile_i2c_isr_tx(pd);
- if (pd->pos == msg->len) {
- i2c_op(pd, OP_RX_ONLY, 0);
- wakeup = 1;
- goto do_wakeup;
- }
+ if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+ iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
- if (pd->pos == -1) {
- data = (msg->addr & 0x7f) << 1;
- data |= (msg->flags & I2C_M_RD) ? 1 : 0;
- } else
- data = msg->buf[pd->pos];
-
- if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
- if (msg->flags & I2C_M_RD)
- i2c_op(pd, OP_TX_TO_RX, data);
- else if (pd->pos == (msg->len - 1)) {
- i2c_op(pd, OP_TX_STOP, data);
- wakeup = 1;
- } else
- i2c_op(pd, OP_TX_ONLY, data);
- } else {
- if (pd->pos == (msg->len - 1))
- data = i2c_op(pd, OP_RX_STOP, 0);
- else
- data = i2c_op(pd, OP_RX_ONLY, 0);
-
- msg->buf[pd->pos] = data;
- }
- pd->pos++;
-
- do_wakeup:
if (wakeup) {
pd->sr |= SW_DONE;
wake_up(&pd->wait);
@@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
{
+ if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+ dev_err(pd->dev, "Unsupported zero length i2c read\n");
+ return -EIO;
+ }
+
/* Initialize channel registers */
iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
@@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
pd->pos = -1;
pd->sr = 0;
- /* Enable all interrupts except wait */
- iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
- ICIC(pd));
+ /* Enable all interrupts to begin with */
+ iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
return 0;
}
@@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
if (!k)
dev_err(pd->dev, "Transfer request timed out\n");
- retry_count = 10;
+ retry_count = 1000;
again:
val = ioread8(ICSR(pd));
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
- if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
- err = -EIO;
- break;
- }
-
/* the interrupt handler may wake us up before the
* transfer is finished, so poll the hardware
* until we're done.
*/
-
- if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
- (val & ICSR_SDAM))) {
- msleep(1);
+ if (val & ICSR_BUSY) {
+ udelay(10);
if (retry_count--)
goto again;
@@ -294,6 +433,12 @@ again:
dev_err(pd->dev, "Polling timed out\n");
break;
}
+
+ /* handle missing acknowledge and arbitration lost */
+ if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
+ err = -EIO;
+ break;
+ }
}
deactivate_ch(pd);
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 862eb352a2d9..73dc52e114eb 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -36,6 +36,7 @@
VT8237S 0x3372 yes
VT8251 0x3287 yes
CX700 0x8324 yes
+ VX800/VX820 0x8353 yes
Note: we assume there can only be one device, with one SMBus interface.
*/
@@ -82,6 +83,7 @@ static unsigned short SMBHSTCFG = 0xD2;
#define VT596_BYTE 0x04
#define VT596_BYTE_DATA 0x08
#define VT596_WORD_DATA 0x0C
+#define VT596_PROC_CALL 0x10
#define VT596_BLOCK_DATA 0x14
#define VT596_I2C_BLOCK_DATA 0x34
@@ -232,6 +234,12 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
}
size = VT596_WORD_DATA;
break;
+ case I2C_SMBUS_PROC_CALL:
+ outb_p(command, SMBHSTCMD);
+ outb_p(data->word & 0xff, SMBHSTDAT0);
+ outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
+ size = VT596_PROC_CALL;
+ break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (!(vt596_features & FEATURE_I2CBLOCK))
goto exit_unsupported;
@@ -262,6 +270,9 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
if (status)
return status;
+ if (size == VT596_PROC_CALL)
+ read_write = I2C_SMBUS_READ;
+
if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK))
return 0;
@@ -271,6 +282,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
data->byte = inb_p(SMBHSTDAT0);
break;
case VT596_WORD_DATA:
+ case VT596_PROC_CALL:
data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
break;
case VT596_I2C_BLOCK_DATA:
@@ -295,7 +307,7 @@ static u32 vt596_func(struct i2c_adapter *adapter)
{
u32 func = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA;
+ I2C_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_DATA;
if (vt596_features & FEATURE_I2CBLOCK)
func |= I2C_FUNC_SMBUS_I2C_BLOCK;
@@ -396,6 +408,7 @@ found:
switch (pdev->device) {
case PCI_DEVICE_ID_VIA_CX700:
+ case PCI_DEVICE_ID_VIA_VX800:
case PCI_DEVICE_ID_VIA_8251:
case PCI_DEVICE_ID_VIA_8237:
case PCI_DEVICE_ID_VIA_8237A:
@@ -459,6 +472,8 @@ static struct pci_device_id vt596_ids[] = {
.driver_data = SMBBA3 },
{ PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CX700),
.driver_data = SMBBA3 },
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX800),
+ .driver_data = SMBBA3 },
{ 0, }
};
generated by cgit v1.2.3-58-ga151 (git 2.39.0) at 2024-12-16 01:56:41 +0000