diff options
Diffstat (limited to 'drivers/hwmon/pmbus/mp2993.c')
| -rw-r--r-- | drivers/hwmon/pmbus/mp2993.c | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/mp2993.c b/drivers/hwmon/pmbus/mp2993.c new file mode 100644 index 000000000000..944593e13231 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2993.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2993) + */ + +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +#define MP2993_VOUT_OVUV_UINT 125 +#define MP2993_VOUT_OVUV_DIV 64 +#define MP2993_VIN_LIMIT_UINT 1 +#define MP2993_VIN_LIMIT_DIV 8 +#define MP2993_READ_VIN_UINT 1 +#define MP2993_READ_VIN_DIV 32 + +#define MP2993_PAGE_NUM 2 + +#define MP2993_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +#define MP2993_RAIL2_FUNC (PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +/* Converts a linear11 data exponent to a specified value */ +static u16 mp2993_linear11_exponent_transfer(u16 word, u16 expect_exponent) +{ + s16 exponent, mantissa, target_exponent; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + target_exponent = (s16)((expect_exponent & 0x1f) << 11) >> 11; + + if (exponent > target_exponent) + mantissa = mantissa << (exponent - target_exponent); + else + mantissa = mantissa >> (target_exponent - exponent); + + return (mantissa & 0x7ff) | ((expect_exponent << 11) & 0xf800); +} + +static int +mp2993_set_vout_format(struct i2c_client *client, int page, int format) +{ + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + return i2c_smbus_write_byte_data(client, PMBUS_VOUT_MODE, format); +} + +static int mp2993_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + /* Set vout to direct format for rail1. */ + ret = mp2993_set_vout_format(client, 0, PB_VOUT_MODE_DIRECT); + if (ret < 0) + return ret; + + /* Set vout to direct format for rail2. */ + return mp2993_set_vout_format(client, 1, PB_VOUT_MODE_DIRECT); +} + +static int mp2993_read_word_data(struct i2c_client *client, int page, int phase, + int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST(ret * MP2993_VOUT_OVUV_UINT, MP2993_VOUT_OVUV_DIV); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The MP2993 ot fault limit value and ot warn limit value + * per rail are always the same, so only PMBUS_OT_FAULT_LIMIT + * and PMBUS_OT_WARN_LIMIT register in page 0 are defined to + * indicates the limit value. + */ + ret = pmbus_read_word_data(client, 0, phase, reg); + break; + case PMBUS_READ_VIN: + /* The MP2993 vin scale is (1/32V)/Lsb */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(9, 0)) * MP2993_READ_VIN_UINT, + MP2993_READ_VIN_DIV); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + /* The MP2993 vin limit scale is (1/8V)/Lsb */ + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(7, 0)) * MP2993_VIN_LIMIT_UINT, + MP2993_VIN_LIMIT_DIV); + break; + case PMBUS_READ_IOUT: + case PMBUS_READ_IIN: + case PMBUS_IIN_OC_WARN_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_READ_VOUT: + case PMBUS_READ_PIN: + case PMBUS_READ_POUT: + case PMBUS_READ_TEMPERATURE_1: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2993_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = DIV_ROUND_CLOSEST(word * MP2993_VOUT_OVUV_DIV, MP2993_VOUT_OVUV_UINT); + ret = pmbus_write_word_data(client, 0, reg, ret); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The MP2993 ot fault limit value and ot warn limit value + * per rail are always the same, so only PMBUS_OT_FAULT_LIMIT + * and PMBUS_OT_WARN_LIMIT register in page 0 are defined to + * config the ot limit value. + */ + ret = pmbus_write_word_data(client, 0, reg, word); + break; + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + /* The MP2993 vin limit scale is (1/8V)/Lsb */ + ret = pmbus_write_word_data(client, 0, reg, + DIV_ROUND_CLOSEST(word * MP2993_VIN_LIMIT_DIV, + MP2993_VIN_LIMIT_UINT)); + break; + case PMBUS_IIN_OC_WARN_LIMIT: + /* + * The PMBUS_IIN_OC_WARN_LIMIT of MP2993 is linear11 format, + * and the exponent is a constant value(5'b00000)， so the + * exponent of word parameter should be converted to 5'b00000. + */ + ret = pmbus_write_word_data(client, page, reg, + mp2993_linear11_exponent_transfer(word, 0x00)); + break; + // + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + /* + * The PMBUS_IOUT_OC_FAULT_LIMIT and PMBUS_IOUT_OC_WARN_LIMIT + * of MP2993 can be regarded as linear11 format, and the + * exponent is a 5'b00001 or 5'b00000. To ensure a larger + * range of limit value, so the exponent of word parameter + * should be converted to 5'b00001. + */ + ret = pmbus_write_word_data(client, page, reg, + mp2993_linear11_exponent_transfer(word, 0x01)); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static struct pmbus_driver_info mp2993_info = { + .pages = MP2993_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = direct, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_TEMPERATURE] = direct, + .format[PSC_POWER] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .m[PSC_VOLTAGE_IN] = 1, + .R[PSC_VOLTAGE_IN] = 0, + .b[PSC_VOLTAGE_IN] = 0, + + .m[PSC_TEMPERATURE] = 1, + .R[PSC_TEMPERATURE] = 0, + .b[PSC_TEMPERATURE] = 0, + + .func[0] = MP2993_RAIL1_FUNC, + .func[1] = MP2993_RAIL2_FUNC, + .read_word_data = mp2993_read_word_data, + .write_word_data = mp2993_write_word_data, + .identify = mp2993_identify, +}; + +static int mp2993_probe(struct i2c_client *client) +{ + return pmbus_do_probe(client, &mp2993_info); +} + +static const struct i2c_device_id mp2993_id[] = { + {"mp2993", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2993_id); + +static const struct of_device_id __maybe_unused mp2993_of_match[] = { + {.compatible = "mps,mp2993"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2993_of_match); + +static struct i2c_driver mp2993_driver = { + .driver = { + .name = "mp2993", + .of_match_table = mp2993_of_match, + }, + .probe = mp2993_probe, + .id_table = mp2993_id, +}; + +module_i2c_driver(mp2993_driver); + +MODULE_AUTHOR("Noah Wang <noahwang.wang@outlook.com>"); +MODULE_DESCRIPTION("PMBus driver for MPS MP2993"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(PMBUS); |