diff options
Diffstat (limited to 'drivers/gpu')
| -rw-r--r-- | drivers/gpu/drm/amd/include/atomfirmware.h | 170 |
1 files changed, 168 insertions, 2 deletions
diff --git a/drivers/gpu/drm/amd/include/atomfirmware.h b/drivers/gpu/drm/amd/include/atomfirmware.h index 0f5ad54d3fd3..de177ce8ca80 100644 --- a/drivers/gpu/drm/amd/include/atomfirmware.h +++ b/drivers/gpu/drm/amd/include/atomfirmware.h @@ -501,6 +501,32 @@ enum atom_cooling_solution_id{ LIQUID_COOLING = 0x01 }; +struct atom_firmware_info_v3_2 { + struct atom_common_table_header table_header; + uint32_t firmware_revision; + uint32_t bootup_sclk_in10khz; + uint32_t bootup_mclk_in10khz; + uint32_t firmware_capability; // enum atombios_firmware_capability + uint32_t main_call_parser_entry; /* direct address of main parser call in VBIOS binary. */ + uint32_t bios_scratch_reg_startaddr; // 1st bios scratch register dword address + uint16_t bootup_vddc_mv; + uint16_t bootup_vddci_mv; + uint16_t bootup_mvddc_mv; + uint16_t bootup_vddgfx_mv; + uint8_t mem_module_id; + uint8_t coolingsolution_id; /*0: Air cooling; 1: Liquid cooling ... */ + uint8_t reserved1[2]; + uint32_t mc_baseaddr_high; + uint32_t mc_baseaddr_low; + uint8_t board_i2c_feature_id; // enum of atom_board_i2c_feature_id_def + uint8_t board_i2c_feature_gpio_id; // i2c id find in gpio_lut data table gpio_id + uint8_t board_i2c_feature_slave_addr; + uint8_t reserved3; + uint16_t bootup_mvddq_mv; + uint16_t bootup_mvpp_mv; + uint32_t zfbstartaddrin16mb; + uint32_t reserved2[3]; +}; /* *************************************************************************** @@ -1169,7 +1195,29 @@ struct atom_gfx_info_v2_2 uint32_t rlc_gpu_timer_refclk; }; - +struct atom_gfx_info_v2_3 { + struct atom_common_table_header table_header; + uint8_t gfxip_min_ver; + uint8_t gfxip_max_ver; + uint8_t max_shader_engines; + uint8_t max_tile_pipes; + uint8_t max_cu_per_sh; + uint8_t max_sh_per_se; + uint8_t max_backends_per_se; + uint8_t max_texture_channel_caches; + uint32_t regaddr_cp_dma_src_addr; + uint32_t regaddr_cp_dma_src_addr_hi; + uint32_t regaddr_cp_dma_dst_addr; + uint32_t regaddr_cp_dma_dst_addr_hi; + uint32_t regaddr_cp_dma_command; + uint32_t regaddr_cp_status; + uint32_t regaddr_rlc_gpu_clock_32; + uint32_t rlc_gpu_timer_refclk; + uint8_t active_cu_per_sh; + uint8_t active_rb_per_se; + uint16_t gcgoldenoffset; + uint32_t rm21_sram_vmin_value; +}; /* *************************************************************************** @@ -1198,6 +1246,76 @@ struct atom_smu_info_v3_1 uint8_t fw_ctf_polarity; // GPIO polarity for CTF }; +struct atom_smu_info_v3_2 { + struct atom_common_table_header table_header; + uint8_t smuip_min_ver; + uint8_t smuip_max_ver; + uint8_t smu_rsd1; + uint8_t gpuclk_ss_mode; + uint16_t sclk_ss_percentage; + uint16_t sclk_ss_rate_10hz; + uint16_t gpuclk_ss_percentage; // in unit of 0.001% + uint16_t gpuclk_ss_rate_10hz; + uint32_t core_refclk_10khz; + uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid + uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching + uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid + uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event + uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid + uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event + uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid + uint8_t fw_ctf_polarity; // GPIO polarity for CTF + uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid + uint8_t pcc_gpio_polarity; // GPIO polarity for CTF + uint16_t smugoldenoffset; + uint32_t gpupll_vco_freq_10khz; + uint32_t bootup_smnclk_10khz; + uint32_t bootup_socclk_10khz; + uint32_t bootup_mp0clk_10khz; + uint32_t bootup_mp1clk_10khz; + uint32_t bootup_lclk_10khz; + uint32_t bootup_dcefclk_10khz; + uint32_t ctf_threshold_override_value; + uint32_t reserved[5]; +}; + +struct atom_smu_info_v3_3 { + struct atom_common_table_header table_header; + uint8_t smuip_min_ver; + uint8_t smuip_max_ver; + uint8_t smu_rsd1; + uint8_t gpuclk_ss_mode; + uint16_t sclk_ss_percentage; + uint16_t sclk_ss_rate_10hz; + uint16_t gpuclk_ss_percentage; // in unit of 0.001% + uint16_t gpuclk_ss_rate_10hz; + uint32_t core_refclk_10khz; + uint8_t ac_dc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for AC/DC switching, =0xff means invalid + uint8_t ac_dc_polarity; // GPIO polarity for AC/DC switching + uint8_t vr0hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR0 HOT event, =0xff means invalid + uint8_t vr0hot_polarity; // GPIO polarity for VR0 HOT event + uint8_t vr1hot_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for VR1 HOT event , =0xff means invalid + uint8_t vr1hot_polarity; // GPIO polarity for VR1 HOT event + uint8_t fw_ctf_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for CTF, =0xff means invalid + uint8_t fw_ctf_polarity; // GPIO polarity for CTF + uint8_t pcc_gpio_bit; // GPIO bit shift in SMU_GPIOPAD_A configured for PCC, =0xff means invalid + uint8_t pcc_gpio_polarity; // GPIO polarity for CTF + uint16_t smugoldenoffset; + uint32_t gpupll_vco_freq_10khz; + uint32_t bootup_smnclk_10khz; + uint32_t bootup_socclk_10khz; + uint32_t bootup_mp0clk_10khz; + uint32_t bootup_mp1clk_10khz; + uint32_t bootup_lclk_10khz; + uint32_t bootup_dcefclk_10khz; + uint32_t ctf_threshold_override_value; + uint32_t syspll3_0_vco_freq_10khz; + uint32_t syspll3_1_vco_freq_10khz; + uint32_t bootup_fclk_10khz; + uint32_t bootup_waflclk_10khz; + uint32_t reserved[3]; +}; + /* *************************************************************************** Data Table smc_dpm_info structure @@ -1283,7 +1401,6 @@ struct atom_smc_dpm_info_v4_1 uint32_t boardreserved[10]; }; - /* *************************************************************************** Data Table asic_profiling_info structure @@ -1864,6 +1981,55 @@ enum atom_smu9_syspll0_clock_id SMU9_SYSPLL0_DISPCLK_ID = 11, // DISPCLK }; +enum atom_smu11_syspll_id { + SMU11_SYSPLL0_ID = 0, + SMU11_SYSPLL1_0_ID = 1, + SMU11_SYSPLL1_1_ID = 2, + SMU11_SYSPLL1_2_ID = 3, + SMU11_SYSPLL2_ID = 4, + SMU11_SYSPLL3_0_ID = 5, + SMU11_SYSPLL3_1_ID = 6, +}; + + +enum atom_smu11_syspll0_clock_id { + SMU11_SYSPLL0_SOCCLK_ID = 0, // SOCCLK + SMU11_SYSPLL0_MP0CLK_ID = 1, // MP0CLK + SMU11_SYSPLL0_DCLK_ID = 2, // DCLK + SMU11_SYSPLL0_VCLK_ID = 3, // VCLK + SMU11_SYSPLL0_ECLK_ID = 4, // ECLK + SMU11_SYSPLL0_DCEFCLK_ID = 5, // DCEFCLK +}; + + +enum atom_smu11_syspll1_0_clock_id { + SMU11_SYSPLL1_0_UCLKA_ID = 0, // UCLK_a +}; + +enum atom_smu11_syspll1_1_clock_id { + SMU11_SYSPLL1_0_UCLKB_ID = 0, // UCLK_b +}; + +enum atom_smu11_syspll1_2_clock_id { + SMU11_SYSPLL1_0_FCLK_ID = 0, // FCLK +}; + +enum atom_smu11_syspll2_clock_id { + SMU11_SYSPLL2_GFXCLK_ID = 0, // GFXCLK +}; + +enum atom_smu11_syspll3_0_clock_id { + SMU11_SYSPLL3_0_WAFCLK_ID = 0, // WAFCLK + SMU11_SYSPLL3_0_DISPCLK_ID = 1, // DISPCLK + SMU11_SYSPLL3_0_DPREFCLK_ID = 2, // DPREFCLK +}; + +enum atom_smu11_syspll3_1_clock_id { + SMU11_SYSPLL3_1_MP1CLK_ID = 0, // MP1CLK + SMU11_SYSPLL3_1_SMNCLK_ID = 1, // SMNCLK + SMU11_SYSPLL3_1_LCLK_ID = 2, // LCLK +}; + struct atom_get_smu_clock_info_output_parameters_v3_1 { union { |