diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_sprite.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_sprite.c | 229 |
1 files changed, 175 insertions, 54 deletions
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index c7d25c5dd4e6..1fa5612a4572 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -32,6 +32,7 @@ #include <drm/drmP.h> #include <drm/drm_crtc.h> #include <drm/drm_fourcc.h> +#include <drm/drm_rect.h> #include "intel_drv.h" #include <drm/i915_drm.h> #include "i915_drv.h" @@ -113,7 +114,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_framebuffer *fb, crtc_w--; crtc_h--; - intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size); + intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size, true); I915_WRITE(SPSTRIDE(pipe, plane), fb->pitches[0]); I915_WRITE(SPPOS(pipe, plane), (crtc_y << 16) | crtc_x); @@ -267,7 +268,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, crtc_w--; crtc_h--; - intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size); + intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size, true); /* * IVB workaround: must disable low power watermarks for at least @@ -334,6 +335,8 @@ ivb_disable_plane(struct drm_plane *plane) dev_priv->sprite_scaling_enabled &= ~(1 << pipe); + intel_update_sprite_watermarks(dev, pipe, 0, 0, false); + /* potentially re-enable LP watermarks */ if (scaling_was_enabled && !dev_priv->sprite_scaling_enabled) intel_update_watermarks(dev); @@ -452,7 +455,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_framebuffer *fb, crtc_w--; crtc_h--; - intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size); + intel_update_sprite_watermarks(dev, pipe, crtc_w, pixel_size, true); dvsscale = 0; if (IS_GEN5(dev) || crtc_w != src_w || crtc_h != src_h) @@ -583,6 +586,20 @@ ilk_get_colorkey(struct drm_plane *plane, struct drm_intel_sprite_colorkey *key) key->flags = I915_SET_COLORKEY_NONE; } +static bool +format_is_yuv(uint32_t format) +{ + switch (format) { + case DRM_FORMAT_YUYV: + case DRM_FORMAT_UYVY: + case DRM_FORMAT_VYUY: + case DRM_FORMAT_YVYU: + return true; + default: + return false; + } +} + static int intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, struct drm_framebuffer *fb, int crtc_x, int crtc_y, @@ -600,9 +617,29 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, pipe); int ret = 0; - int x = src_x >> 16, y = src_y >> 16; - int primary_w = crtc->mode.hdisplay, primary_h = crtc->mode.vdisplay; bool disable_primary = false; + bool visible; + int hscale, vscale; + int max_scale, min_scale; + int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); + struct drm_rect src = { + /* sample coordinates in 16.16 fixed point */ + .x1 = src_x, + .x2 = src_x + src_w, + .y1 = src_y, + .y2 = src_y + src_h, + }; + struct drm_rect dst = { + /* integer pixels */ + .x1 = crtc_x, + .x2 = crtc_x + crtc_w, + .y1 = crtc_y, + .y2 = crtc_y + crtc_h, + }; + const struct drm_rect clip = { + .x2 = crtc->mode.hdisplay, + .y2 = crtc->mode.vdisplay, + }; intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; @@ -618,19 +655,23 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, intel_plane->src_w = src_w; intel_plane->src_h = src_h; - src_w = src_w >> 16; - src_h = src_h >> 16; - /* Pipe must be running... */ - if (!(I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_ENABLE)) + if (!(I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_ENABLE)) { + DRM_DEBUG_KMS("Pipe disabled\n"); return -EINVAL; + } - if (crtc_x >= primary_w || crtc_y >= primary_h) + /* Don't modify another pipe's plane */ + if (intel_plane->pipe != intel_crtc->pipe) { + DRM_DEBUG_KMS("Wrong plane <-> crtc mapping\n"); return -EINVAL; + } - /* Don't modify another pipe's plane */ - if (intel_plane->pipe != intel_crtc->pipe) + /* FIXME check all gen limits */ + if (fb->width < 3 || fb->height < 3 || fb->pitches[0] > 16384) { + DRM_DEBUG_KMS("Unsuitable framebuffer for plane\n"); return -EINVAL; + } /* Sprite planes can be linear or x-tiled surfaces */ switch (obj->tiling_mode) { @@ -638,55 +679,123 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, case I915_TILING_X: break; default: + DRM_DEBUG_KMS("Unsupported tiling mode\n"); return -EINVAL; } /* - * Clamp the width & height into the visible area. Note we don't - * try to scale the source if part of the visible region is offscreen. - * The caller must handle that by adjusting source offset and size. + * FIXME the following code does a bunch of fuzzy adjustments to the + * coordinates and sizes. We probably need some way to decide whether + * more strict checking should be done instead. */ - if ((crtc_x < 0) && ((crtc_x + crtc_w) > 0)) { - crtc_w += crtc_x; - crtc_x = 0; - } - if ((crtc_x + crtc_w) <= 0) /* Nothing to display */ - goto out; - if ((crtc_x + crtc_w) > primary_w) - crtc_w = primary_w - crtc_x; + max_scale = intel_plane->max_downscale << 16; + min_scale = intel_plane->can_scale ? 1 : (1 << 16); + + hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale); + BUG_ON(hscale < 0); + + vscale = drm_rect_calc_vscale_relaxed(&src, &dst, min_scale, max_scale); + BUG_ON(vscale < 0); + + visible = drm_rect_clip_scaled(&src, &dst, &clip, hscale, vscale); + + crtc_x = dst.x1; + crtc_y = dst.y1; + crtc_w = drm_rect_width(&dst); + crtc_h = drm_rect_height(&dst); + + if (visible) { + /* check again in case clipping clamped the results */ + hscale = drm_rect_calc_hscale(&src, &dst, min_scale, max_scale); + if (hscale < 0) { + DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n"); + drm_rect_debug_print(&src, true); + drm_rect_debug_print(&dst, false); + + return hscale; + } - if ((crtc_y < 0) && ((crtc_y + crtc_h) > 0)) { - crtc_h += crtc_y; - crtc_y = 0; + vscale = drm_rect_calc_vscale(&src, &dst, min_scale, max_scale); + if (vscale < 0) { + DRM_DEBUG_KMS("Vertical scaling factor out of limits\n"); + drm_rect_debug_print(&src, true); + drm_rect_debug_print(&dst, false); + + return vscale; + } + + /* Make the source viewport size an exact multiple of the scaling factors. */ + drm_rect_adjust_size(&src, + drm_rect_width(&dst) * hscale - drm_rect_width(&src), + drm_rect_height(&dst) * vscale - drm_rect_height(&src)); + + /* sanity check to make sure the src viewport wasn't enlarged */ + WARN_ON(src.x1 < (int) src_x || + src.y1 < (int) src_y || + src.x2 > (int) (src_x + src_w) || + src.y2 > (int) (src_y + src_h)); + + /* + * Hardware doesn't handle subpixel coordinates. + * Adjust to (macro)pixel boundary, but be careful not to + * increase the source viewport size, because that could + * push the downscaling factor out of bounds. + */ + src_x = src.x1 >> 16; + src_w = drm_rect_width(&src) >> 16; + src_y = src.y1 >> 16; + src_h = drm_rect_height(&src) >> 16; + + if (format_is_yuv(fb->pixel_format)) { + src_x &= ~1; + src_w &= ~1; + + /* + * Must keep src and dst the + * same if we can't scale. + */ + if (!intel_plane->can_scale) + crtc_w &= ~1; + + if (crtc_w == 0) + visible = false; + } } - if ((crtc_y + crtc_h) <= 0) /* Nothing to display */ - goto out; - if (crtc_y + crtc_h > primary_h) - crtc_h = primary_h - crtc_y; - if (!crtc_w || !crtc_h) /* Again, nothing to display */ - goto out; + /* Check size restrictions when scaling */ + if (visible && (src_w != crtc_w || src_h != crtc_h)) { + unsigned int width_bytes; - /* - * We may not have a scaler, eg. HSW does not have it any more - */ - if (!intel_plane->can_scale && (crtc_w != src_w || crtc_h != src_h)) - return -EINVAL; + WARN_ON(!intel_plane->can_scale); - /* - * We can take a larger source and scale it down, but - * only so much... 16x is the max on SNB. - */ - if (((src_w * src_h) / (crtc_w * crtc_h)) > intel_plane->max_downscale) - return -EINVAL; + /* FIXME interlacing min height is 6 */ + + if (crtc_w < 3 || crtc_h < 3) + visible = false; + + if (src_w < 3 || src_h < 3) + visible = false; + + width_bytes = ((src_x * pixel_size) & 63) + src_w * pixel_size; + + if (src_w > 2048 || src_h > 2048 || + width_bytes > 4096 || fb->pitches[0] > 4096) { + DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n"); + return -EINVAL; + } + } + + dst.x1 = crtc_x; + dst.x2 = crtc_x + crtc_w; + dst.y1 = crtc_y; + dst.y2 = crtc_y + crtc_h; /* * If the sprite is completely covering the primary plane, * we can disable the primary and save power. */ - if ((crtc_x == 0) && (crtc_y == 0) && - (crtc_w == primary_w) && (crtc_h == primary_h)) - disable_primary = true; + disable_primary = drm_rect_equals(&dst, &clip); + WARN_ON(disable_primary && !visible); mutex_lock(&dev->struct_mutex); @@ -708,8 +817,12 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, if (!disable_primary) intel_enable_primary(crtc); - intel_plane->update_plane(plane, fb, obj, crtc_x, crtc_y, - crtc_w, crtc_h, x, y, src_w, src_h); + if (visible) + intel_plane->update_plane(plane, fb, obj, + crtc_x, crtc_y, crtc_w, crtc_h, + src_x, src_y, src_w, src_h); + else + intel_plane->disable_plane(plane); if (disable_primary) intel_disable_primary(crtc); @@ -732,7 +845,6 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, out_unlock: mutex_unlock(&dev->struct_mutex); -out: return ret; } @@ -845,6 +957,14 @@ void intel_plane_restore(struct drm_plane *plane) intel_plane->src_w, intel_plane->src_h); } +void intel_plane_disable(struct drm_plane *plane) +{ + if (!plane->crtc || !plane->fb) + return; + + intel_disable_plane(plane); +} + static const struct drm_plane_funcs intel_plane_funcs = { .update_plane = intel_update_plane, .disable_plane = intel_disable_plane, @@ -918,13 +1038,15 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane) break; case 7: - if (IS_HASWELL(dev) || IS_VALLEYVIEW(dev)) - intel_plane->can_scale = false; - else + if (IS_IVYBRIDGE(dev)) { intel_plane->can_scale = true; + intel_plane->max_downscale = 2; + } else { + intel_plane->can_scale = false; + intel_plane->max_downscale = 1; + } if (IS_VALLEYVIEW(dev)) { - intel_plane->max_downscale = 1; intel_plane->update_plane = vlv_update_plane; intel_plane->disable_plane = vlv_disable_plane; intel_plane->update_colorkey = vlv_update_colorkey; @@ -933,7 +1055,6 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane) plane_formats = vlv_plane_formats; num_plane_formats = ARRAY_SIZE(vlv_plane_formats); } else { - intel_plane->max_downscale = 2; intel_plane->update_plane = ivb_update_plane; intel_plane->disable_plane = ivb_disable_plane; intel_plane->update_colorkey = ivb_update_colorkey; |