summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_dp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dp.c')
-rw-r--r--drivers/gpu/drm/i915/intel_dp.c374
1 files changed, 222 insertions, 152 deletions
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index fb3715b4b09d..f61cb7998c72 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -148,15 +148,6 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp)
return max_link_bw;
}
-static int
-intel_dp_link_clock(uint8_t link_bw)
-{
- if (link_bw == DP_LINK_BW_2_7)
- return 270000;
- else
- return 162000;
-}
-
/*
* The units on the numbers in the next two are... bizarre. Examples will
* make it clearer; this one parallels an example in the eDP spec.
@@ -191,7 +182,8 @@ intel_dp_adjust_dithering(struct intel_dp *intel_dp,
struct drm_display_mode *mode,
bool adjust_mode)
{
- int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
+ int max_link_clock =
+ drm_dp_bw_code_to_link_rate(intel_dp_max_link_bw(intel_dp));
int max_lanes = drm_dp_max_lane_count(intel_dp->dpcd);
int max_rate, mode_rate;
@@ -330,6 +322,48 @@ intel_dp_check_edp(struct intel_dp *intel_dp)
}
}
+static uint32_t
+intel_dp_aux_wait_done(struct intel_dp *intel_dp, bool has_aux_irq)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t ch_ctl = intel_dp->output_reg + 0x10;
+ uint32_t status;
+ bool done;
+
+ if (IS_HASWELL(dev)) {
+ switch (intel_dig_port->port) {
+ case PORT_A:
+ ch_ctl = DPA_AUX_CH_CTL;
+ break;
+ case PORT_B:
+ ch_ctl = PCH_DPB_AUX_CH_CTL;
+ break;
+ case PORT_C:
+ ch_ctl = PCH_DPC_AUX_CH_CTL;
+ break;
+ case PORT_D:
+ ch_ctl = PCH_DPD_AUX_CH_CTL;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+#define C (((status = I915_READ_NOTRACE(ch_ctl)) & DP_AUX_CH_CTL_SEND_BUSY) == 0)
+ if (has_aux_irq)
+ done = wait_event_timeout(dev_priv->gmbus_wait_queue, C, 10);
+ else
+ done = wait_for_atomic(C, 10) == 0;
+ if (!done)
+ DRM_ERROR("dp aux hw did not signal timeout (has irq: %i)!\n",
+ has_aux_irq);
+#undef C
+
+ return status;
+}
+
static int
intel_dp_aux_ch(struct intel_dp *intel_dp,
uint8_t *send, int send_bytes,
@@ -341,11 +375,17 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t ch_ctl = output_reg + 0x10;
uint32_t ch_data = ch_ctl + 4;
- int i;
- int recv_bytes;
+ int i, ret, recv_bytes;
uint32_t status;
uint32_t aux_clock_divider;
int try, precharge;
+ bool has_aux_irq = INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev);
+
+ /* dp aux is extremely sensitive to irq latency, hence request the
+ * lowest possible wakeup latency and so prevent the cpu from going into
+ * deep sleep states.
+ */
+ pm_qos_update_request(&dev_priv->pm_qos, 0);
if (IS_HASWELL(dev)) {
switch (intel_dig_port->port) {
@@ -379,7 +419,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
* clock divider.
*/
if (is_cpu_edp(intel_dp)) {
- if (IS_HASWELL(dev))
+ if (HAS_DDI(dev))
aux_clock_divider = intel_ddi_get_cdclk_freq(dev_priv) >> 1;
else if (IS_VALLEYVIEW(dev))
aux_clock_divider = 100;
@@ -399,7 +439,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
- status = I915_READ(ch_ctl);
+ status = I915_READ_NOTRACE(ch_ctl);
if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
break;
msleep(1);
@@ -408,7 +448,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
if (try == 3) {
WARN(1, "dp_aux_ch not started status 0x%08x\n",
I915_READ(ch_ctl));
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
/* Must try at least 3 times according to DP spec */
@@ -421,6 +462,7 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
/* Send the command and wait for it to complete */
I915_WRITE(ch_ctl,
DP_AUX_CH_CTL_SEND_BUSY |
+ (has_aux_irq ? DP_AUX_CH_CTL_INTERRUPT : 0) |
DP_AUX_CH_CTL_TIME_OUT_400us |
(send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) |
(precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) |
@@ -428,12 +470,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
DP_AUX_CH_CTL_DONE |
DP_AUX_CH_CTL_TIME_OUT_ERROR |
DP_AUX_CH_CTL_RECEIVE_ERROR);
- for (;;) {
- status = I915_READ(ch_ctl);
- if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0)
- break;
- udelay(100);
- }
+
+ status = intel_dp_aux_wait_done(intel_dp, has_aux_irq);
/* Clear done status and any errors */
I915_WRITE(ch_ctl,
@@ -451,7 +489,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
if ((status & DP_AUX_CH_CTL_DONE) == 0) {
DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status);
- return -EBUSY;
+ ret = -EBUSY;
+ goto out;
}
/* Check for timeout or receive error.
@@ -459,14 +498,16 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
*/
if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) {
DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status);
- return -EIO;
+ ret = -EIO;
+ goto out;
}
/* Timeouts occur when the device isn't connected, so they're
* "normal" -- don't fill the kernel log with these */
if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) {
DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status);
- return -ETIMEDOUT;
+ ret = -ETIMEDOUT;
+ goto out;
}
/* Unload any bytes sent back from the other side */
@@ -479,7 +520,11 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
unpack_aux(I915_READ(ch_data + i),
recv + i, recv_bytes - i);
- return recv_bytes;
+ ret = recv_bytes;
+out:
+ pm_qos_update_request(&dev_priv->pm_qos, PM_QOS_DEFAULT_VALUE);
+
+ return ret;
}
/* Write data to the aux channel in native mode */
@@ -718,16 +763,35 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
return false;
bpp = adjusted_mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 24;
+
+ if (intel_dp->color_range_auto) {
+ /*
+ * See:
+ * CEA-861-E - 5.1 Default Encoding Parameters
+ * VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
+ */
+ if (bpp != 18 && drm_match_cea_mode(adjusted_mode) > 1)
+ intel_dp->color_range = DP_COLOR_RANGE_16_235;
+ else
+ intel_dp->color_range = 0;
+ }
+
+ if (intel_dp->color_range)
+ adjusted_mode->private_flags |= INTEL_MODE_LIMITED_COLOR_RANGE;
+
mode_rate = intel_dp_link_required(adjusted_mode->clock, bpp);
for (clock = 0; clock <= max_clock; clock++) {
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
- int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
+ int link_bw_clock =
+ drm_dp_bw_code_to_link_rate(bws[clock]);
+ int link_avail = intel_dp_max_data_rate(link_bw_clock,
+ lane_count);
if (mode_rate <= link_avail) {
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
- adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+ adjusted_mode->clock = link_bw_clock;
DRM_DEBUG_KMS("DP link bw %02x lane "
"count %d clock %d bpp %d\n",
intel_dp->link_bw, intel_dp->lane_count,
@@ -742,39 +806,6 @@ intel_dp_mode_fixup(struct drm_encoder *encoder,
return false;
}
-struct intel_dp_m_n {
- uint32_t tu;
- uint32_t gmch_m;
- uint32_t gmch_n;
- uint32_t link_m;
- uint32_t link_n;
-};
-
-static void
-intel_reduce_ratio(uint32_t *num, uint32_t *den)
-{
- while (*num > 0xffffff || *den > 0xffffff) {
- *num >>= 1;
- *den >>= 1;
- }
-}
-
-static void
-intel_dp_compute_m_n(int bpp,
- int nlanes,
- int pixel_clock,
- int link_clock,
- struct intel_dp_m_n *m_n)
-{
- m_n->tu = 64;
- m_n->gmch_m = (pixel_clock * bpp) >> 3;
- m_n->gmch_n = link_clock * nlanes;
- intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- m_n->link_m = pixel_clock;
- m_n->link_n = link_clock;
- intel_reduce_ratio(&m_n->link_m, &m_n->link_n);
-}
-
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
@@ -785,7 +816,7 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int lane_count = 4;
- struct intel_dp_m_n m_n;
+ struct intel_link_m_n m_n;
int pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->cpu_transcoder;
@@ -808,8 +839,8 @@ intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
* the number of bytes_per_pixel post-LUT, which we always
* set up for 8-bits of R/G/B, or 3 bytes total.
*/
- intel_dp_compute_m_n(intel_crtc->bpp, lane_count,
- mode->clock, adjusted_mode->clock, &m_n);
+ intel_link_compute_m_n(intel_crtc->bpp, lane_count,
+ mode->clock, adjusted_mode->clock, &m_n);
if (IS_HASWELL(dev)) {
I915_WRITE(PIPE_DATA_M1(cpu_transcoder),
@@ -851,6 +882,32 @@ void intel_dp_init_link_config(struct intel_dp *intel_dp)
}
}
+static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpa_ctl;
+
+ DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock);
+ dpa_ctl = I915_READ(DP_A);
+ dpa_ctl &= ~DP_PLL_FREQ_MASK;
+
+ if (clock < 200000) {
+ /* For a long time we've carried around a ILK-DevA w/a for the
+ * 160MHz clock. If we're really unlucky, it's still required.
+ */
+ DRM_DEBUG_KMS("160MHz cpu eDP clock, might need ilk devA w/a\n");
+ dpa_ctl |= DP_PLL_FREQ_160MHZ;
+ } else {
+ dpa_ctl |= DP_PLL_FREQ_270MHZ;
+ }
+
+ I915_WRITE(DP_A, dpa_ctl);
+
+ POSTING_READ(DP_A);
+ udelay(500);
+}
+
static void
intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
@@ -926,7 +983,8 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
else
intel_dp->DP |= DP_PLL_FREQ_270MHZ;
} else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
- intel_dp->DP |= intel_dp->color_range;
+ if (!HAS_PCH_SPLIT(dev))
+ intel_dp->DP |= intel_dp->color_range;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
intel_dp->DP |= DP_SYNC_HS_HIGH;
@@ -950,6 +1008,9 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
} else {
intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
}
+
+ if (is_cpu_edp(intel_dp))
+ ironlake_set_pll_edp(crtc, adjusted_mode->clock);
}
#define IDLE_ON_MASK (PP_ON | 0 | PP_SEQUENCE_MASK | 0 | PP_SEQUENCE_STATE_MASK)
@@ -1057,6 +1118,8 @@ static void ironlake_panel_vdd_off_sync(struct intel_dp *intel_dp)
struct drm_i915_private *dev_priv = dev->dev_private;
u32 pp;
+ WARN_ON(!mutex_is_locked(&dev->mode_config.mutex));
+
if (!intel_dp->want_panel_vdd && ironlake_edp_have_panel_vdd(intel_dp)) {
pp = ironlake_get_pp_control(dev_priv);
pp &= ~EDP_FORCE_VDD;
@@ -1543,7 +1606,7 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST
}
static uint32_t
-intel_dp_signal_levels(uint8_t train_set)
+intel_gen4_signal_levels(uint8_t train_set)
{
uint32_t signal_levels = 0;
@@ -1641,7 +1704,7 @@ intel_gen7_edp_signal_levels(uint8_t train_set)
/* Gen7.5's (HSW) DP voltage swing and pre-emphasis control */
static uint32_t
-intel_dp_signal_levels_hsw(uint8_t train_set)
+intel_hsw_signal_levels(uint8_t train_set)
{
int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
DP_TRAIN_PRE_EMPHASIS_MASK);
@@ -1673,6 +1736,34 @@ intel_dp_signal_levels_hsw(uint8_t train_set)
}
}
+/* Properly updates "DP" with the correct signal levels. */
+static void
+intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ uint32_t signal_levels, mask;
+ uint8_t train_set = intel_dp->train_set[0];
+
+ if (IS_HASWELL(dev)) {
+ signal_levels = intel_hsw_signal_levels(train_set);
+ mask = DDI_BUF_EMP_MASK;
+ } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
+ signal_levels = intel_gen7_edp_signal_levels(train_set);
+ mask = EDP_LINK_TRAIN_VOL_EMP_MASK_IVB;
+ } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+ signal_levels = intel_gen6_edp_signal_levels(train_set);
+ mask = EDP_LINK_TRAIN_VOL_EMP_MASK_SNB;
+ } else {
+ signal_levels = intel_gen4_signal_levels(train_set);
+ mask = DP_VOLTAGE_MASK | DP_PRE_EMPHASIS_MASK;
+ }
+
+ DRM_DEBUG_KMS("Using signal levels %08x\n", signal_levels);
+
+ *DP = (*DP & ~mask) | signal_levels;
+}
+
static bool
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t dp_reg_value,
@@ -1696,14 +1787,18 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
case DP_TRAINING_PATTERN_DISABLE:
- temp |= DP_TP_CTL_LINK_TRAIN_IDLE;
- I915_WRITE(DP_TP_CTL(port), temp);
- if (wait_for((I915_READ(DP_TP_STATUS(port)) &
- DP_TP_STATUS_IDLE_DONE), 1))
- DRM_ERROR("Timed out waiting for DP idle patterns\n");
+ if (port != PORT_A) {
+ temp |= DP_TP_CTL_LINK_TRAIN_IDLE;
+ I915_WRITE(DP_TP_CTL(port), temp);
+
+ if (wait_for((I915_READ(DP_TP_STATUS(port)) &
+ DP_TP_STATUS_IDLE_DONE), 1))
+ DRM_ERROR("Timed out waiting for DP idle patterns\n");
+
+ temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
+ }
- temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
break;
@@ -1791,7 +1886,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
int voltage_tries, loop_tries;
uint32_t DP = intel_dp->DP;
- if (IS_HASWELL(dev))
+ if (HAS_DDI(dev))
intel_ddi_prepare_link_retrain(encoder);
/* Write the link configuration data */
@@ -1809,24 +1904,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
for (;;) {
/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
uint8_t link_status[DP_LINK_STATUS_SIZE];
- uint32_t signal_levels;
-
- if (IS_HASWELL(dev)) {
- signal_levels = intel_dp_signal_levels_hsw(
- intel_dp->train_set[0]);
- DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
- } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
- signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
- } else {
- signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- }
- DRM_DEBUG_KMS("training pattern 1 signal levels %08x\n",
- signal_levels);
+
+ intel_dp_set_signal_levels(intel_dp, &DP);
/* Set training pattern 1 */
if (!intel_dp_set_link_train(intel_dp, DP,
@@ -1882,7 +1961,6 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
void
intel_dp_complete_link_train(struct intel_dp *intel_dp)
{
- struct drm_device *dev = intel_dp_to_dev(intel_dp);
bool channel_eq = false;
int tries, cr_tries;
uint32_t DP = intel_dp->DP;
@@ -1892,8 +1970,6 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
cr_tries = 0;
channel_eq = false;
for (;;) {
- /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
- uint32_t signal_levels;
uint8_t link_status[DP_LINK_STATUS_SIZE];
if (cr_tries > 5) {
@@ -1902,19 +1978,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
break;
}
- if (IS_HASWELL(dev)) {
- signal_levels = intel_dp_signal_levels_hsw(intel_dp->train_set[0]);
- DP = (DP & ~DDI_BUF_EMP_MASK) | signal_levels;
- } else if (IS_GEN7(dev) && is_cpu_edp(intel_dp) && !IS_VALLEYVIEW(dev)) {
- signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
- } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
- signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
- } else {
- signal_levels = intel_dp_signal_levels(intel_dp->train_set[0]);
- DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
- }
+ intel_dp_set_signal_levels(intel_dp, &DP);
/* channel eq pattern */
if (!intel_dp_set_link_train(intel_dp, DP,
@@ -1964,6 +2028,8 @@ intel_dp_link_down(struct intel_dp *intel_dp)
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc =
+ to_intel_crtc(intel_dig_port->base.base.crtc);
uint32_t DP = intel_dp->DP;
/*
@@ -1981,7 +2047,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
* intel_ddi_prepare_link_retrain will take care of redoing the link
* train.
*/
- if (IS_HASWELL(dev))
+ if (HAS_DDI(dev))
return;
if (WARN_ON((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0))
@@ -1998,7 +2064,8 @@ intel_dp_link_down(struct intel_dp *intel_dp)
}
POSTING_READ(intel_dp->output_reg);
- msleep(17);
+ /* We don't really know why we're doing this */
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
if (HAS_PCH_IBX(dev) &&
I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
@@ -2018,19 +2085,14 @@ intel_dp_link_down(struct intel_dp *intel_dp)
/* Changes to enable or select take place the vblank
* after being written.
*/
- if (crtc == NULL) {
- /* We can arrive here never having been attached
- * to a CRTC, for instance, due to inheriting
- * random state from the BIOS.
- *
- * If the pipe is not running, play safe and
- * wait for the clocks to stabilise before
- * continuing.
- */
+ if (WARN_ON(crtc == NULL)) {
+ /* We should never try to disable a port without a crtc
+ * attached. For paranoia keep the code around for a
+ * bit. */
POSTING_READ(intel_dp->output_reg);
msleep(50);
} else
- intel_wait_for_vblank(dev, to_intel_crtc(crtc)->pipe);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
}
DP &= ~DP_AUDIO_OUTPUT_ENABLE;
@@ -2042,10 +2104,16 @@ intel_dp_link_down(struct intel_dp *intel_dp)
static bool
intel_dp_get_dpcd(struct intel_dp *intel_dp)
{
+ char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
+
if (intel_dp_aux_native_read_retry(intel_dp, 0x000, intel_dp->dpcd,
sizeof(intel_dp->dpcd)) == 0)
return false; /* aux transfer failed */
+ hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
+ 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
+ DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
+
if (intel_dp->dpcd[DP_DPCD_REV] == 0)
return false; /* DPCD not present */
@@ -2206,6 +2274,8 @@ static enum drm_connector_status
ironlake_dp_detect(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
enum drm_connector_status status;
/* Can't disconnect eDP, but you can close the lid... */
@@ -2216,6 +2286,9 @@ ironlake_dp_detect(struct intel_dp *intel_dp)
return status;
}
+ if (!ibx_digital_port_connected(dev_priv, intel_dig_port))
+ return connector_status_disconnected;
+
return intel_dp_detect_dpcd(intel_dp);
}
@@ -2224,17 +2297,18 @@ g4x_dp_detect(struct intel_dp *intel_dp)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
uint32_t bit;
- switch (intel_dp->output_reg) {
- case DP_B:
- bit = DPB_HOTPLUG_LIVE_STATUS;
+ switch (intel_dig_port->port) {
+ case PORT_B:
+ bit = PORTB_HOTPLUG_LIVE_STATUS;
break;
- case DP_C:
- bit = DPC_HOTPLUG_LIVE_STATUS;
+ case PORT_C:
+ bit = PORTC_HOTPLUG_LIVE_STATUS;
break;
- case DP_D:
- bit = DPD_HOTPLUG_LIVE_STATUS;
+ case PORT_D:
+ bit = PORTD_HOTPLUG_LIVE_STATUS;
break;
default:
return connector_status_unknown;
@@ -2290,13 +2364,6 @@ intel_dp_get_edid_modes(struct drm_connector *connector, struct i2c_adapter *ada
return intel_ddc_get_modes(connector, adapter);
}
-
-/**
- * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection.
- *
- * \return true if DP port is connected.
- * \return false if DP port is disconnected.
- */
static enum drm_connector_status
intel_dp_detect(struct drm_connector *connector, bool force)
{
@@ -2306,7 +2373,6 @@ intel_dp_detect(struct drm_connector *connector, bool force)
struct drm_device *dev = connector->dev;
enum drm_connector_status status;
struct edid *edid = NULL;
- char dpcd_hex_dump[sizeof(intel_dp->dpcd) * 3];
intel_dp->has_audio = false;
@@ -2315,10 +2381,6 @@ intel_dp_detect(struct drm_connector *connector, bool force)
else
status = g4x_dp_detect(intel_dp);
- hex_dump_to_buffer(intel_dp->dpcd, sizeof(intel_dp->dpcd),
- 32, 1, dpcd_hex_dump, sizeof(dpcd_hex_dump), false);
- DRM_DEBUG_KMS("DPCD: %s\n", dpcd_hex_dump);
-
if (status != connector_status_connected)
return status;
@@ -2419,10 +2481,21 @@ intel_dp_set_property(struct drm_connector *connector,
}
if (property == dev_priv->broadcast_rgb_property) {
- if (val == !!intel_dp->color_range)
- return 0;
-
- intel_dp->color_range = val ? DP_COLOR_RANGE_16_235 : 0;
+ switch (val) {
+ case INTEL_BROADCAST_RGB_AUTO:
+ intel_dp->color_range_auto = true;
+ break;
+ case INTEL_BROADCAST_RGB_FULL:
+ intel_dp->color_range_auto = false;
+ intel_dp->color_range = 0;
+ break;
+ case INTEL_BROADCAST_RGB_LIMITED:
+ intel_dp->color_range_auto = false;
+ intel_dp->color_range = DP_COLOR_RANGE_16_235;
+ break;
+ default:
+ return -EINVAL;
+ }
goto done;
}
@@ -2445,11 +2518,8 @@ intel_dp_set_property(struct drm_connector *connector,
return -EINVAL;
done:
- if (intel_encoder->base.crtc) {
- struct drm_crtc *crtc = intel_encoder->base.crtc;
- intel_set_mode(crtc, &crtc->mode,
- crtc->x, crtc->y, crtc->fb);
- }
+ if (intel_encoder->base.crtc)
+ intel_crtc_restore_mode(intel_encoder->base.crtc);
return 0;
}
@@ -2491,7 +2561,6 @@ void intel_dp_encoder_destroy(struct drm_encoder *encoder)
static const struct drm_encoder_helper_funcs intel_dp_helper_funcs = {
.mode_fixup = intel_dp_mode_fixup,
.mode_set = intel_dp_mode_set,
- .disable = intel_encoder_noop,
};
static const struct drm_connector_funcs intel_dp_connector_funcs = {
@@ -2566,6 +2635,7 @@ intel_dp_add_properties(struct intel_dp *intel_dp, struct drm_connector *connect
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
+ intel_dp->color_range_auto = true;
if (is_edp(intel_dp)) {
drm_mode_create_scaling_mode_property(connector->dev);
@@ -2755,7 +2825,7 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
intel_connector_attach_encoder(intel_connector, intel_encoder);
drm_sysfs_connector_add(connector);
- if (IS_HASWELL(dev))
+ if (HAS_DDI(dev))
intel_connector->get_hw_state = intel_ddi_connector_get_hw_state;
else
intel_connector->get_hw_state = intel_connector_get_hw_state;
@@ -2767,15 +2837,15 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
name = "DPDDC-A";
break;
case PORT_B:
- dev_priv->hotplug_supported_mask |= DPB_HOTPLUG_INT_STATUS;
+ dev_priv->hotplug_supported_mask |= PORTB_HOTPLUG_INT_STATUS;
name = "DPDDC-B";
break;
case PORT_C:
- dev_priv->hotplug_supported_mask |= DPC_HOTPLUG_INT_STATUS;
+ dev_priv->hotplug_supported_mask |= PORTC_HOTPLUG_INT_STATUS;
name = "DPDDC-C";
break;
case PORT_D:
- dev_priv->hotplug_supported_mask |= DPD_HOTPLUG_INT_STATUS;
+ dev_priv->hotplug_supported_mask |= PORTD_HOTPLUG_INT_STATUS;
name = "DPDDC-D";
break;
default: