diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 120 |
1 files changed, 67 insertions, 53 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index cf418be7d30a..b2270d576979 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1724,6 +1724,15 @@ static void i9xx_enable_pll(struct intel_crtc *crtc) I915_READ(DPLL(!crtc->pipe)) | DPLL_DVO_2X_MODE); } + /* + * Apparently we need to have VGA mode enabled prior to changing + * the P1/P2 dividers. Otherwise the DPLL will keep using the old + * dividers, even though the register value does change. + */ + I915_WRITE(reg, 0); + + I915_WRITE(reg, dpll); + /* Wait for the clocks to stabilize. */ POSTING_READ(reg); udelay(150); @@ -14107,6 +14116,11 @@ static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; + if (obj->userptr.mm) { + DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n"); + return -EINVAL; + } + return drm_gem_handle_create(file, &obj->base, handle); } @@ -14897,9 +14911,19 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc) /* restore vblank interrupts to correct state */ drm_crtc_vblank_reset(&crtc->base); if (crtc->active) { + struct intel_plane *plane; + drm_calc_timestamping_constants(&crtc->base, &crtc->base.hwmode); update_scanline_offset(crtc); drm_crtc_vblank_on(&crtc->base); + + /* Disable everything but the primary plane */ + for_each_intel_plane_on_crtc(dev, crtc, plane) { + if (plane->base.type == DRM_PLANE_TYPE_PRIMARY) + continue; + + plane->disable_plane(&plane->base, &crtc->base); + } } /* We need to sanitize the plane -> pipe mapping first because this will @@ -15067,38 +15091,25 @@ void i915_redisable_vga(struct drm_device *dev) i915_redisable_vga_power_on(dev); } -static bool primary_get_hw_state(struct intel_crtc *crtc) +static bool primary_get_hw_state(struct intel_plane *plane) { - struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + struct drm_i915_private *dev_priv = to_i915(plane->base.dev); - return !!(I915_READ(DSPCNTR(crtc->plane)) & DISPLAY_PLANE_ENABLE); + return I915_READ(DSPCNTR(plane->plane)) & DISPLAY_PLANE_ENABLE; } -static void readout_plane_state(struct intel_crtc *crtc, - struct intel_crtc_state *crtc_state) +/* FIXME read out full plane state for all planes */ +static void readout_plane_state(struct intel_crtc *crtc) { - struct intel_plane *p; - struct intel_plane_state *plane_state; - bool active = crtc_state->base.active; - - for_each_intel_plane(crtc->base.dev, p) { - if (crtc->pipe != p->pipe) - continue; - - plane_state = to_intel_plane_state(p->base.state); + struct drm_plane *primary = crtc->base.primary; + struct intel_plane_state *plane_state = + to_intel_plane_state(primary->state); - if (p->base.type == DRM_PLANE_TYPE_PRIMARY) { - plane_state->visible = primary_get_hw_state(crtc); - if (plane_state->visible) - crtc->base.state->plane_mask |= - 1 << drm_plane_index(&p->base); - } else { - if (active) - p->disable_plane(&p->base, &crtc->base); + plane_state->visible = + primary_get_hw_state(to_intel_plane(primary)); - plane_state->visible = false; - } - } + if (plane_state->visible) + crtc->base.state->plane_mask |= 1 << drm_plane_index(primary); } static void intel_modeset_readout_hw_state(struct drm_device *dev) @@ -15121,34 +15132,7 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) crtc->base.state->active = crtc->active; crtc->base.enabled = crtc->active; - memset(&crtc->base.mode, 0, sizeof(crtc->base.mode)); - if (crtc->base.state->active) { - intel_mode_from_pipe_config(&crtc->base.mode, crtc->config); - intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config); - WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode)); - - /* - * The initial mode needs to be set in order to keep - * the atomic core happy. It wants a valid mode if the - * crtc's enabled, so we do the above call. - * - * At this point some state updated by the connectors - * in their ->detect() callback has not run yet, so - * no recalculation can be done yet. - * - * Even if we could do a recalculation and modeset - * right now it would cause a double modeset if - * fbdev or userspace chooses a different initial mode. - * - * If that happens, someone indicated they wanted a - * mode change, which means it's safe to do a full - * recalculation. - */ - crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED; - } - - crtc->base.hwmode = crtc->config->base.adjusted_mode; - readout_plane_state(crtc, to_intel_crtc_state(crtc->base.state)); + readout_plane_state(crtc); DRM_DEBUG_KMS("[CRTC:%d] hw state readout: %s\n", crtc->base.base.id, @@ -15207,6 +15191,36 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) connector->base.name, connector->base.encoder ? "enabled" : "disabled"); } + + for_each_intel_crtc(dev, crtc) { + crtc->base.hwmode = crtc->config->base.adjusted_mode; + + memset(&crtc->base.mode, 0, sizeof(crtc->base.mode)); + if (crtc->base.state->active) { + intel_mode_from_pipe_config(&crtc->base.mode, crtc->config); + intel_mode_from_pipe_config(&crtc->base.state->adjusted_mode, crtc->config); + WARN_ON(drm_atomic_set_mode_for_crtc(crtc->base.state, &crtc->base.mode)); + + /* + * The initial mode needs to be set in order to keep + * the atomic core happy. It wants a valid mode if the + * crtc's enabled, so we do the above call. + * + * At this point some state updated by the connectors + * in their ->detect() callback has not run yet, so + * no recalculation can be done yet. + * + * Even if we could do a recalculation and modeset + * right now it would cause a double modeset if + * fbdev or userspace chooses a different initial mode. + * + * If that happens, someone indicated they wanted a + * mode change, which means it's safe to do a full + * recalculation. + */ + crtc->base.state->mode.private_flags = I915_MODE_FLAG_INHERITED; + } + } } /* Scan out the current hw modeset state, |