diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_cdclk.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_cdclk.c | 1908 |
1 files changed, 1908 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c new file mode 100644 index 000000000000..dd3ad52b7dfe --- /dev/null +++ b/drivers/gpu/drm/i915/intel_cdclk.c @@ -0,0 +1,1908 @@ +/* + * Copyright © 2006-2017 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + */ + +#include "intel_drv.h" + +/** + * DOC: CDCLK / RAWCLK + * + * The display engine uses several different clocks to do its work. There + * are two main clocks involved that aren't directly related to the actual + * pixel clock or any symbol/bit clock of the actual output port. These + * are the core display clock (CDCLK) and RAWCLK. + * + * CDCLK clocks most of the display pipe logic, and thus its frequency + * must be high enough to support the rate at which pixels are flowing + * through the pipes. Downscaling must also be accounted as that increases + * the effective pixel rate. + * + * On several platforms the CDCLK frequency can be changed dynamically + * to minimize power consumption for a given display configuration. + * Typically changes to the CDCLK frequency require all the display pipes + * to be shut down while the frequency is being changed. + * + * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit. + * DMC will not change the active CDCLK frequency however, so that part + * will still be performed by the driver directly. + * + * RAWCLK is a fixed frequency clock, often used by various auxiliary + * blocks such as AUX CH or backlight PWM. Hence the only thing we + * really need to know about RAWCLK is its frequency so that various + * dividers can be programmed correctly. + */ + +static void fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + cdclk_state->cdclk = 133333; +} + +static void fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + cdclk_state->cdclk = 200000; +} + +static void fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + cdclk_state->cdclk = 266667; +} + +static void fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + cdclk_state->cdclk = 333333; +} + +static void fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + cdclk_state->cdclk = 400000; +} + +static void fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + cdclk_state->cdclk = 450000; +} + +static void i85x_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + u16 hpllcc = 0; + + /* + * 852GM/852GMV only supports 133 MHz and the HPLLCC + * encoding is different :( + * FIXME is this the right way to detect 852GM/852GMV? + */ + if (pdev->revision == 0x1) { + cdclk_state->cdclk = 133333; + return; + } + + pci_bus_read_config_word(pdev->bus, + PCI_DEVFN(0, 3), HPLLCC, &hpllcc); + + /* Assume that the hardware is in the high speed state. This + * should be the default. + */ + switch (hpllcc & GC_CLOCK_CONTROL_MASK) { + case GC_CLOCK_133_200: + case GC_CLOCK_133_200_2: + case GC_CLOCK_100_200: + cdclk_state->cdclk = 200000; + break; + case GC_CLOCK_166_250: + cdclk_state->cdclk = 250000; + break; + case GC_CLOCK_100_133: + cdclk_state->cdclk = 133333; + break; + case GC_CLOCK_133_266: + case GC_CLOCK_133_266_2: + case GC_CLOCK_166_266: + cdclk_state->cdclk = 266667; + break; + } +} + +static void i915gm_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + u16 gcfgc = 0; + + pci_read_config_word(pdev, GCFGC, &gcfgc); + + if (gcfgc & GC_LOW_FREQUENCY_ENABLE) { + cdclk_state->cdclk = 133333; + return; + } + + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_333_320_MHZ: + cdclk_state->cdclk = 333333; + break; + default: + case GC_DISPLAY_CLOCK_190_200_MHZ: + cdclk_state->cdclk = 190000; + break; + } +} + +static void i945gm_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + u16 gcfgc = 0; + + pci_read_config_word(pdev, GCFGC, &gcfgc); + + if (gcfgc & GC_LOW_FREQUENCY_ENABLE) { + cdclk_state->cdclk = 133333; + return; + } + + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_333_320_MHZ: + cdclk_state->cdclk = 320000; + break; + default: + case GC_DISPLAY_CLOCK_190_200_MHZ: + cdclk_state->cdclk = 200000; + break; + } +} + +static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv) +{ + static const unsigned int blb_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + [4] = 6400000, + }; + static const unsigned int pnv_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + [4] = 2666667, + }; + static const unsigned int cl_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 6400000, + [4] = 3333333, + [5] = 3566667, + [6] = 4266667, + }; + static const unsigned int elk_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 4800000, + }; + static const unsigned int ctg_vco[8] = { + [0] = 3200000, + [1] = 4000000, + [2] = 5333333, + [3] = 6400000, + [4] = 2666667, + [5] = 4266667, + }; + const unsigned int *vco_table; + unsigned int vco; + uint8_t tmp = 0; + + /* FIXME other chipsets? */ + if (IS_GM45(dev_priv)) + vco_table = ctg_vco; + else if (IS_G45(dev_priv)) + vco_table = elk_vco; + else if (IS_I965GM(dev_priv)) + vco_table = cl_vco; + else if (IS_PINEVIEW(dev_priv)) + vco_table = pnv_vco; + else if (IS_G33(dev_priv)) + vco_table = blb_vco; + else + return 0; + + tmp = I915_READ(IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO); + + vco = vco_table[tmp & 0x7]; + if (vco == 0) + DRM_ERROR("Bad HPLL VCO (HPLLVCO=0x%02x)\n", tmp); + else + DRM_DEBUG_KMS("HPLL VCO %u kHz\n", vco); + + return vco; +} + +static void g33_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + static const uint8_t div_3200[] = { 12, 10, 8, 7, 5, 16 }; + static const uint8_t div_4000[] = { 14, 12, 10, 8, 6, 20 }; + static const uint8_t div_4800[] = { 20, 14, 12, 10, 8, 24 }; + static const uint8_t div_5333[] = { 20, 16, 12, 12, 8, 28 }; + const uint8_t *div_table; + unsigned int cdclk_sel; + uint16_t tmp = 0; + + cdclk_state->vco = intel_hpll_vco(dev_priv); + + pci_read_config_word(pdev, GCFGC, &tmp); + + cdclk_sel = (tmp >> 4) & 0x7; + + if (cdclk_sel >= ARRAY_SIZE(div_3200)) + goto fail; + + switch (cdclk_state->vco) { + case 3200000: + div_table = div_3200; + break; + case 4000000: + div_table = div_4000; + break; + case 4800000: + div_table = div_4800; + break; + case 5333333: + div_table = div_5333; + break; + default: + goto fail; + } + + cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco, + div_table[cdclk_sel]); + return; + +fail: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n", + cdclk_state->vco, tmp); + cdclk_state->cdclk = 190476; +} + +static void pnv_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + u16 gcfgc = 0; + + pci_read_config_word(pdev, GCFGC, &gcfgc); + + switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { + case GC_DISPLAY_CLOCK_267_MHZ_PNV: + cdclk_state->cdclk = 266667; + break; + case GC_DISPLAY_CLOCK_333_MHZ_PNV: + cdclk_state->cdclk = 333333; + break; + case GC_DISPLAY_CLOCK_444_MHZ_PNV: + cdclk_state->cdclk = 444444; + break; + case GC_DISPLAY_CLOCK_200_MHZ_PNV: + cdclk_state->cdclk = 200000; + break; + default: + DRM_ERROR("Unknown pnv display core clock 0x%04x\n", gcfgc); + case GC_DISPLAY_CLOCK_133_MHZ_PNV: + cdclk_state->cdclk = 133333; + break; + case GC_DISPLAY_CLOCK_167_MHZ_PNV: + cdclk_state->cdclk = 166667; + break; + } +} + +static void i965gm_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + static const uint8_t div_3200[] = { 16, 10, 8 }; + static const uint8_t div_4000[] = { 20, 12, 10 }; + static const uint8_t div_5333[] = { 24, 16, 14 }; + const uint8_t *div_table; + unsigned int cdclk_sel; + uint16_t tmp = 0; + + cdclk_state->vco = intel_hpll_vco(dev_priv); + + pci_read_config_word(pdev, GCFGC, &tmp); + + cdclk_sel = ((tmp >> 8) & 0x1f) - 1; + + if (cdclk_sel >= ARRAY_SIZE(div_3200)) + goto fail; + + switch (cdclk_state->vco) { + case 3200000: + div_table = div_3200; + break; + case 4000000: + div_table = div_4000; + break; + case 5333333: + div_table = div_5333; + break; + default: + goto fail; + } + + cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco, + div_table[cdclk_sel]); + return; + +fail: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n", + cdclk_state->vco, tmp); + cdclk_state->cdclk = 200000; +} + +static void gm45_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + struct pci_dev *pdev = dev_priv->drm.pdev; + unsigned int cdclk_sel; + uint16_t tmp = 0; + + cdclk_state->vco = intel_hpll_vco(dev_priv); + + pci_read_config_word(pdev, GCFGC, &tmp); + + cdclk_sel = (tmp >> 12) & 0x1; + + switch (cdclk_state->vco) { + case 2666667: + case 4000000: + case 5333333: + cdclk_state->cdclk = cdclk_sel ? 333333 : 222222; + break; + case 3200000: + cdclk_state->cdclk = cdclk_sel ? 320000 : 228571; + break; + default: + DRM_ERROR("Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n", + cdclk_state->vco, tmp); + cdclk_state->cdclk = 222222; + break; + } +} + +static void hsw_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + uint32_t lcpll = I915_READ(LCPLL_CTL); + uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK; + + if (lcpll & LCPLL_CD_SOURCE_FCLK) + cdclk_state->cdclk = 800000; + else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) + cdclk_state->cdclk = 450000; + else if (freq == LCPLL_CLK_FREQ_450) + cdclk_state->cdclk = 450000; + else if (IS_HSW_ULT(dev_priv)) + cdclk_state->cdclk = 337500; + else + cdclk_state->cdclk = 540000; +} + +static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, + int max_pixclk) +{ + int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ? + 333333 : 320000; + int limit = IS_CHERRYVIEW(dev_priv) ? 95 : 90; + + /* + * We seem to get an unstable or solid color picture at 200MHz. + * Not sure what's wrong. For now use 200MHz only when all pipes + * are off. + */ + if (!IS_CHERRYVIEW(dev_priv) && + max_pixclk > freq_320*limit/100) + return 400000; + else if (max_pixclk > 266667*limit/100) + return freq_320; + else if (max_pixclk > 0) + return 266667; + else + return 200000; +} + +static void vlv_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + cdclk_state->vco = vlv_get_hpll_vco(dev_priv); + cdclk_state->cdclk = vlv_get_cck_clock(dev_priv, "cdclk", + CCK_DISPLAY_CLOCK_CONTROL, + cdclk_state->vco); +} + +static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv) +{ + unsigned int credits, default_credits; + + if (IS_CHERRYVIEW(dev_priv)) + default_credits = PFI_CREDIT(12); + else + default_credits = PFI_CREDIT(8); + + if (dev_priv->cdclk.hw.cdclk >= dev_priv->czclk_freq) { + /* CHV suggested value is 31 or 63 */ + if (IS_CHERRYVIEW(dev_priv)) + credits = PFI_CREDIT_63; + else + credits = PFI_CREDIT(15); + } else { + credits = default_credits; + } + + /* + * WA - write default credits before re-programming + * FIXME: should we also set the resend bit here? + */ + I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE | + default_credits); + + I915_WRITE(GCI_CONTROL, VGA_FAST_MODE_DISABLE | + credits | PFI_CREDIT_RESEND); + + /* + * FIXME is this guaranteed to clear + * immediately or should we poll for it? + */ + WARN_ON(I915_READ(GCI_CONTROL) & PFI_CREDIT_RESEND); +} + +static void vlv_set_cdclk(struct drm_i915_private *dev_priv, + const struct intel_cdclk_state *cdclk_state) +{ + int cdclk = cdclk_state->cdclk; + u32 val, cmd; + + if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */ + cmd = 2; + else if (cdclk == 266667) + cmd = 1; + else + cmd = 0; + + mutex_lock(&dev_priv->rps.hw_lock); + val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); + val &= ~DSPFREQGUAR_MASK; + val |= (cmd << DSPFREQGUAR_SHIFT); + vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); + if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & + DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), + 50)) { + DRM_ERROR("timed out waiting for CDclk change\n"); + } + mutex_unlock(&dev_priv->rps.hw_lock); + + mutex_lock(&dev_priv->sb_lock); + + if (cdclk == 400000) { + u32 divider; + + divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, + cdclk) - 1; + + /* adjust cdclk divider */ + val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); + val &= ~CCK_FREQUENCY_VALUES; + val |= divider; + vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val); + + if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) & + CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT), + 50)) + DRM_ERROR("timed out waiting for CDclk change\n"); + } + + /* adjust self-refresh exit latency value */ + val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC); + val &= ~0x7f; + + /* + * For high bandwidth configs, we set a higher latency in the bunit + * so that the core display fetch happens in time to avoid underruns. + */ + if (cdclk == 400000) + val |= 4500 / 250; /* 4.5 usec */ + else + val |= 3000 / 250; /* 3.0 usec */ + vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val); + + mutex_unlock(&dev_priv->sb_lock); + + intel_update_cdclk(dev_priv); + + vlv_program_pfi_credits(dev_priv); +} + +static void chv_set_cdclk(struct drm_i915_private *dev_priv, + const struct intel_cdclk_state *cdclk_state) +{ + int cdclk = cdclk_state->cdclk; + u32 val, cmd; + + switch (cdclk) { + case 333333: + case 320000: + case 266667: + case 200000: + break; + default: + MISSING_CASE(cdclk); + return; + } + + /* + * Specs are full of misinformation, but testing on actual + * hardware has shown that we just need to write the desired + * CCK divider into the Punit register. + */ + cmd = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1; + + mutex_lock(&dev_priv->rps.hw_lock); + val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); + val &= ~DSPFREQGUAR_MASK_CHV; + val |= (cmd << DSPFREQGUAR_SHIFT_CHV); + vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); + if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & + DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV), + 50)) { + DRM_ERROR("timed out waiting for CDclk change\n"); + } + mutex_unlock(&dev_priv->rps.hw_lock); + + intel_update_cdclk(dev_priv); + + vlv_program_pfi_credits(dev_priv); +} + +static int bdw_calc_cdclk(int max_pixclk) +{ + if (max_pixclk > 540000) + return 675000; + else if (max_pixclk > 450000) + return 540000; + else if (max_pixclk > 337500) + return 450000; + else + return 337500; +} + +static void bdw_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + uint32_t lcpll = I915_READ(LCPLL_CTL); + uint32_t freq = lcpll & LCPLL_CLK_FREQ_MASK; + + if (lcpll & LCPLL_CD_SOURCE_FCLK) + cdclk_state->cdclk = 800000; + else if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) + cdclk_state->cdclk = 450000; + else if (freq == LCPLL_CLK_FREQ_450) + cdclk_state->cdclk = 450000; + else if (freq == LCPLL_CLK_FREQ_54O_BDW) + cdclk_state->cdclk = 540000; + else if (freq == LCPLL_CLK_FREQ_337_5_BDW) + cdclk_state->cdclk = 337500; + else + cdclk_state->cdclk = 675000; +} + +static void bdw_set_cdclk(struct drm_i915_private *dev_priv, + const struct intel_cdclk_state *cdclk_state) +{ + int cdclk = cdclk_state->cdclk; + uint32_t val, data; + int ret; + + if (WARN((I915_READ(LCPLL_CTL) & + (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK | + LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE | + LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW | + LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK, + "trying to change cdclk frequency with cdclk not enabled\n")) + return; + + mutex_lock(&dev_priv->rps.hw_lock); + ret = sandybridge_pcode_write(dev_priv, + BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0); + mutex_unlock(&dev_priv->rps.hw_lock); + if (ret) { + DRM_ERROR("failed to inform pcode about cdclk change\n"); + return; + } + + val = I915_READ(LCPLL_CTL); + val |= LCPLL_CD_SOURCE_FCLK; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for_us(I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE, 1)) + DRM_ERROR("Switching to FCLK failed\n"); + + val = I915_READ(LCPLL_CTL); + val &= ~LCPLL_CLK_FREQ_MASK; + + switch (cdclk) { + case 450000: + val |= LCPLL_CLK_FREQ_450; + data = 0; + break; + case 540000: + val |= LCPLL_CLK_FREQ_54O_BDW; + data = 1; + break; + case 337500: + val |= LCPLL_CLK_FREQ_337_5_BDW; + data = 2; + break; + case 675000: + val |= LCPLL_CLK_FREQ_675_BDW; + data = 3; + break; + default: + WARN(1, "invalid cdclk frequency\n"); + return; + } + + I915_WRITE(LCPLL_CTL, val); + + val = I915_READ(LCPLL_CTL); + val &= ~LCPLL_CD_SOURCE_FCLK; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for_us((I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) + DRM_ERROR("Switching back to LCPLL failed\n"); + + mutex_lock(&dev_priv->rps.hw_lock); + sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, data); + mutex_unlock(&dev_priv->rps.hw_lock); + + I915_WRITE(CDCLK_FREQ, DIV_ROUND_CLOSEST(cdclk, 1000) - 1); + + intel_update_cdclk(dev_priv); + + WARN(cdclk != dev_priv->cdclk.hw.cdclk, + "cdclk requested %d kHz but got %d kHz\n", + cdclk, dev_priv->cdclk.hw.cdclk); +} + +static int skl_calc_cdclk(int max_pixclk, int vco) +{ + if (vco == 8640000) { + if (max_pixclk > 540000) + return 617143; + else if (max_pixclk > 432000) + return 540000; + else if (max_pixclk > 308571) + return 432000; + else + return 308571; + } else { + if (max_pixclk > 540000) + return 675000; + else if (max_pixclk > 450000) + return 540000; + else if (max_pixclk > 337500) + return 450000; + else + return 337500; + } +} + +static void skl_dpll0_update(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + u32 val; + + cdclk_state->ref = 24000; + cdclk_state->vco = 0; + + val = I915_READ(LCPLL1_CTL); + if ((val & LCPLL_PLL_ENABLE) == 0) + return; + + if (WARN_ON((val & LCPLL_PLL_LOCK) == 0)) + return; + + val = I915_READ(DPLL_CTRL1); + + if (WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | + DPLL_CTRL1_SSC(SKL_DPLL0) | + DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) != + DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) + return; + + switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) { + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0): + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0): + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0): + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0): + cdclk_state->vco = 8100000; + break; + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0): + case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0): + cdclk_state->vco = 8640000; + break; + default: + MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); + break; + } +} + +static void skl_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + u32 cdctl; + + skl_dpll0_update(dev_priv, cdclk_state); + + cdclk_state->cdclk = cdclk_state->ref; + + if (cdclk_state->vco == 0) + return; + + cdctl = I915_READ(CDCLK_CTL); + + if (cdclk_state->vco == 8640000) { + switch (cdctl & CDCLK_FREQ_SEL_MASK) { + case CDCLK_FREQ_450_432: + cdclk_state->cdclk = 432000; + break; + case CDCLK_FREQ_337_308: + cdclk_state->cdclk = 308571; + break; + case CDCLK_FREQ_540: + cdclk_state->cdclk = 540000; + break; + case CDCLK_FREQ_675_617: + cdclk_state->cdclk = 617143; + break; + default: + MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); + break; + } + } else { + switch (cdctl & CDCLK_FREQ_SEL_MASK) { + case CDCLK_FREQ_450_432: + cdclk_state->cdclk = 450000; + break; + case CDCLK_FREQ_337_308: + cdclk_state->cdclk = 337500; + break; + case CDCLK_FREQ_540: + cdclk_state->cdclk = 540000; + break; + case CDCLK_FREQ_675_617: + cdclk_state->cdclk = 675000; + break; + default: + MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK); + break; + } + } +} + +/* convert from kHz to .1 fixpoint MHz with -1MHz offset */ +static int skl_cdclk_decimal(int cdclk) +{ + return DIV_ROUND_CLOSEST(cdclk - 1000, 500); +} + +static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv, + int vco) +{ + bool changed = dev_priv->skl_preferred_vco_freq != vco; + + dev_priv->skl_preferred_vco_freq = vco; + + if (changed) + intel_update_max_cdclk(dev_priv); +} + +static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco) +{ + int min_cdclk = skl_calc_cdclk(0, vco); + u32 val; + + WARN_ON(vco != 8100000 && vco != 8640000); + + /* select the minimum CDCLK before enabling DPLL 0 */ + val = CDCLK_FREQ_337_308 | skl_cdclk_decimal(min_cdclk); + I915_WRITE(CDCLK_CTL, val); + POSTING_READ(CDCLK_CTL); + + /* + * We always enable DPLL0 with the lowest link rate possible, but still + * taking into account the VCO required to operate the eDP panel at the + * desired frequency. The usual DP link rates operate with a VCO of + * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640. + * The modeset code is responsible for the selection of the exact link + * rate later on, with the constraint of choosing a frequency that + * works with vco. + */ + val = I915_READ(DPLL_CTRL1); + + val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) | + DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)); + val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0); + if (vco == 8640000) + val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, + SKL_DPLL0); + else + val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, + SKL_DPLL0); + + I915_WRITE(DPLL_CTRL1, val); + POSTING_READ(DPLL_CTRL1); + + I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) | LCPLL_PLL_ENABLE); + + if (intel_wait_for_register(dev_priv, + LCPLL1_CTL, LCPLL_PLL_LOCK, LCPLL_PLL_LOCK, + 5)) + DRM_ERROR("DPLL0 not locked\n"); + + dev_priv->cdclk.hw.vco = vco; + + /* We'll want to keep using the current vco from now on. */ + skl_set_preferred_cdclk_vco(dev_priv, vco); +} + +static void skl_dpll0_disable(struct drm_i915_private *dev_priv) +{ + I915_WRITE(LCPLL1_CTL, I915_READ(LCPLL1_CTL) & ~LCPLL_PLL_ENABLE); + if (intel_wait_for_register(dev_priv, + LCPLL1_CTL, LCPLL_PLL_LOCK, 0, + 1)) + DRM_ERROR("Couldn't disable DPLL0\n"); + + dev_priv->cdclk.hw.vco = 0; +} + +static void skl_set_cdclk(struct drm_i915_private *dev_priv, + const struct intel_cdclk_state *cdclk_state) +{ + int cdclk = cdclk_state->cdclk; + int vco = cdclk_state->vco; + u32 freq_select, pcu_ack; + int ret; + + WARN_ON((cdclk == 24000) != (vco == 0)); + + mutex_lock(&dev_priv->rps.hw_lock); + ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL, + SKL_CDCLK_PREPARE_FOR_CHANGE, + SKL_CDCLK_READY_FOR_CHANGE, + SKL_CDCLK_READY_FOR_CHANGE, 3); + mutex_unlock(&dev_priv->rps.hw_lock); + if (ret) { + DRM_ERROR("Failed to inform PCU about cdclk change (%d)\n", + ret); + return; + } + + /* set CDCLK_CTL */ + switch (cdclk) { + case 450000: + case 432000: + freq_select = CDCLK_FREQ_450_432; + pcu_ack = 1; + break; + case 540000: + freq_select = CDCLK_FREQ_540; + pcu_ack = 2; + break; + case 308571: + case 337500: + default: + freq_select = CDCLK_FREQ_337_308; + pcu_ack = 0; + break; + case 617143: + case 675000: + freq_select = CDCLK_FREQ_675_617; + pcu_ack = 3; + break; + } + + if (dev_priv->cdclk.hw.vco != 0 && + dev_priv->cdclk.hw.vco != vco) + skl_dpll0_disable(dev_priv); + + if (dev_priv->cdclk.hw.vco != vco) + skl_dpll0_enable(dev_priv, vco); + + I915_WRITE(CDCLK_CTL, freq_select | skl_cdclk_decimal(cdclk)); + POSTING_READ(CDCLK_CTL); + + /* inform PCU of the change */ + mutex_lock(&dev_priv->rps.hw_lock); + sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, pcu_ack); + mutex_unlock(&dev_priv->rps.hw_lock); + + intel_update_cdclk(dev_priv); +} + +static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv) +{ + uint32_t cdctl, expected; + + /* + * check if the pre-os initialized the display + * There is SWF18 scratchpad register defined which is set by the + * pre-os which can be used by the OS drivers to check the status + */ + if ((I915_READ(SWF_ILK(0x18)) & 0x00FFFFFF) == 0) + goto sanitize; + + intel_update_cdclk(dev_priv); + /* Is PLL enabled and locked ? */ + if (dev_priv->cdclk.hw.vco == 0 || + dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref) + goto sanitize; + + /* DPLL okay; verify the cdclock + * + * Noticed in some instances that the freq selection is correct but + * decimal part is programmed wrong from BIOS where pre-os does not + * enable display. Verify the same as well. + */ + cdctl = I915_READ(CDCLK_CTL); + expected = (cdctl & CDCLK_FREQ_SEL_MASK) | + skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk); + if (cdctl == expected) + /* All well; nothing to sanitize */ + return; + +sanitize: + DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n"); + + /* force cdclk programming */ + dev_priv->cdclk.hw.cdclk = 0; + /* force full PLL disable + enable */ + dev_priv->cdclk.hw.vco = -1; +} + +/** + * skl_init_cdclk - Initialize CDCLK on SKL + * @dev_priv: i915 device + * + * Initialize CDCLK for SKL and derivatives. This is generally + * done only during the display core initialization sequence, + * after which the DMC will take care of turning CDCLK off/on + * as needed. + */ +void skl_init_cdclk(struct drm_i915_private *dev_priv) +{ + struct intel_cdclk_state cdclk_state; + + skl_sanitize_cdclk(dev_priv); + + if (dev_priv->cdclk.hw.cdclk != 0 && + dev_priv->cdclk.hw.vco != 0) { + /* + * Use the current vco as our initial + * guess as to what the preferred vco is. + */ + if (dev_priv->skl_preferred_vco_freq == 0) + skl_set_preferred_cdclk_vco(dev_priv, + dev_priv->cdclk.hw.vco); + return; + } + + cdclk_state = dev_priv->cdclk.hw; + + cdclk_state.vco = dev_priv->skl_preferred_vco_freq; + if (cdclk_state.vco == 0) + cdclk_state.vco = 8100000; + cdclk_state.cdclk = skl_calc_cdclk(0, cdclk_state.vco); + + skl_set_cdclk(dev_priv, &cdclk_state); +} + +/** + * skl_uninit_cdclk - Uninitialize CDCLK on SKL + * @dev_priv: i915 device + * + * Uninitialize CDCLK for SKL and derivatives. This is done only + * during the display core uninitialization sequence. + */ +void skl_uninit_cdclk(struct drm_i915_private *dev_priv) +{ + struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw; + + cdclk_state.cdclk = cdclk_state.ref; + cdclk_state.vco = 0; + + skl_set_cdclk(dev_priv, &cdclk_state); +} + +static int bxt_calc_cdclk(int max_pixclk) +{ + if (max_pixclk > 576000) + return 624000; + else if (max_pixclk > 384000) + return 576000; + else if (max_pixclk > 288000) + return 384000; + else if (max_pixclk > 144000) + return 288000; + else + return 144000; +} + +static int glk_calc_cdclk(int max_pixclk) +{ + if (max_pixclk > 2 * 158400) + return 316800; + else if (max_pixclk > 2 * 79200) + return 158400; + else + return 79200; +} + +static int bxt_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk) +{ + int ratio; + + if (cdclk == dev_priv->cdclk.hw.ref) + return 0; + + switch (cdclk) { + default: + MISSING_CASE(cdclk); + case 144000: + case 288000: + case 384000: + case 576000: + ratio = 60; + break; + case 624000: + ratio = 65; + break; + } + + return dev_priv->cdclk.hw.ref * ratio; +} + +static int glk_de_pll_vco(struct drm_i915_private *dev_priv, int cdclk) +{ + int ratio; + + if (cdclk == dev_priv->cdclk.hw.ref) + return 0; + + switch (cdclk) { + default: + MISSING_CASE(cdclk); + case 79200: + case 158400: + case 316800: + ratio = 33; + break; + } + + return dev_priv->cdclk.hw.ref * ratio; +} + +static void bxt_de_pll_update(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + u32 val; + + cdclk_state->ref = 19200; + cdclk_state->vco = 0; + + val = I915_READ(BXT_DE_PLL_ENABLE); + if ((val & BXT_DE_PLL_PLL_ENABLE) == 0) + return; + + if (WARN_ON((val & BXT_DE_PLL_LOCK) == 0)) + return; + + val = I915_READ(BXT_DE_PLL_CTL); + cdclk_state->vco = (val & BXT_DE_PLL_RATIO_MASK) * cdclk_state->ref; +} + +static void bxt_get_cdclk(struct drm_i915_private *dev_priv, + struct intel_cdclk_state *cdclk_state) +{ + u32 divider; + int div; + + bxt_de_pll_update(dev_priv, cdclk_state); + + cdclk_state->cdclk = cdclk_state->ref; + + if (cdclk_state->vco == 0) + return; + + divider = I915_READ(CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK; + + switch (divider) { + case BXT_CDCLK_CD2X_DIV_SEL_1: + div = 2; + break; + case BXT_CDCLK_CD2X_DIV_SEL_1_5: + WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n"); + div = 3; + break; + case BXT_CDCLK_CD2X_DIV_SEL_2: + div = 4; + break; + case BXT_CDCLK_CD2X_DIV_SEL_4: + div = 8; + break; + default: + MISSING_CASE(divider); + return; + } + + cdclk_state->cdclk = DIV_ROUND_CLOSEST(cdclk_state->vco, div); +} + +static void bxt_de_pll_disable(struct drm_i915_private *dev_priv) +{ + I915_WRITE(BXT_DE_PLL_ENABLE, 0); + + /* Timeout 200us */ + if (intel_wait_for_register(dev_priv, + BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 0, + 1)) + DRM_ERROR("timeout waiting for DE PLL unlock\n"); + + dev_priv->cdclk.hw.vco = 0; +} + +static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco) +{ + int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref); + u32 val; + + val = I915_READ(BXT_DE_PLL_CTL); + val &= ~BXT_DE_PLL_RATIO_MASK; + val |= BXT_DE_PLL_RATIO(ratio); + I915_WRITE(BXT_DE_PLL_CTL, val); + + I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE); + + /* Timeout 200us */ + if (intel_wait_for_register(dev_priv, + BXT_DE_PLL_ENABLE, + BXT_DE_PLL_LOCK, + BXT_DE_PLL_LOCK, + 1)) + DRM_ERROR("timeout waiting for DE PLL lock\n"); + + dev_priv->cdclk.hw.vco = vco; +} + +static void bxt_set_cdclk(struct drm_i915_private *dev_priv, + const struct intel_cdclk_state *cdclk_state) +{ + int cdclk = cdclk_state->cdclk; + int vco = cdclk_state->vco; + u32 val, divider; + int ret; + + /* cdclk = vco / 2 / div{1,1.5,2,4} */ + switch (DIV_ROUND_CLOSEST(vco, cdclk)) { + case 8: + divider = BXT_CDCLK_CD2X_DIV_SEL_4; + break; + case 4: + divider = BXT_CDCLK_CD2X_DIV_SEL_2; + break; + case 3: + WARN(IS_GEMINILAKE(dev_priv), "Unsupported divider\n"); + divider = BXT_CDCLK_CD2X_DIV_SEL_1_5; + break; + case 2: + divider = BXT_CDCLK_CD2X_DIV_SEL_1; + break; + default: + WARN_ON(cdclk != dev_priv->cdclk.hw.ref); + WARN_ON(vco != 0); + + divider = BXT_CDCLK_CD2X_DIV_SEL_1; + break; + } + + /* Inform power controller of upcoming frequency change */ + mutex_lock(&dev_priv->rps.hw_lock); + ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, + 0x80000000); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret) { + DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n", + ret, cdclk); + return; + } + + if (dev_priv->cdclk.hw.vco != 0 && + dev_priv->cdclk.hw.vco != vco) + bxt_de_pll_disable(dev_priv); + + if (dev_priv->cdclk.hw.vco != vco) + bxt_de_pll_enable(dev_priv, vco); + + val = divider | skl_cdclk_decimal(cdclk); + /* + * FIXME if only the cd2x divider needs changing, it could be done + * without shutting off the pipe (if only one pipe is active). + */ + val |= BXT_CDCLK_CD2X_PIPE_NONE; + /* + * Disable SSA Precharge when CD clock frequency < 500 MHz, + * enable otherwise. + */ + if (cdclk >= 500000) + val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; + I915_WRITE(CDCLK_CTL, val); + + mutex_lock(&dev_priv->rps.hw_lock); + ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, + DIV_ROUND_UP(cdclk, 25000)); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret) { + DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n", + ret, cdclk); + return; + } + + intel_update_cdclk(dev_priv); +} + +static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv) +{ + u32 cdctl, expected; + + intel_update_cdclk(dev_priv); + + if (dev_priv->cdclk.hw.vco == 0 || + dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.ref) + goto sanitize; + + /* DPLL okay; verify the cdclock + * + * Some BIOS versions leave an incorrect decimal frequency value and + * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4, + * so sanitize this register. + */ + cdctl = I915_READ(CDCLK_CTL); + /* + * Let's ignore the pipe field, since BIOS could have configured the + * dividers both synching to an active pipe, or asynchronously + * (PIPE_NONE). + */ + cdctl &= ~BXT_CDCLK_CD2X_PIPE_NONE; + + expected = (cdctl & BXT_CDCLK_CD2X_DIV_SEL_MASK) | + skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk); + /* + * Disable SSA Precharge when CD clock frequency < 500 MHz, + * enable otherwise. + */ + if (dev_priv->cdclk.hw.cdclk >= 500000) + expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; + + if (cdctl == expected) + /* All well; nothing to sanitize */ + return; + +sanitize: + DRM_DEBUG_KMS("Sanitizing cdclk programmed by pre-os\n"); + + /* force cdclk programming */ + dev_priv->cdclk.hw.cdclk = 0; + + /* force full PLL disable + enable */ + dev_priv->cdclk.hw.vco = -1; +} + +/** + * bxt_init_cdclk - Initialize CDCLK on BXT + * @dev_priv: i915 device + * + * Initialize CDCLK for BXT and derivatives. This is generally + * done only during the display core initialization sequence, + * after which the DMC will take care of turning CDCLK off/on + * as needed. + */ +void bxt_init_cdclk(struct drm_i915_private *dev_priv) +{ + struct intel_cdclk_state cdclk_state; + + bxt_sanitize_cdclk(dev_priv); + + if (dev_priv->cdclk.hw.cdclk != 0 && + dev_priv->cdclk.hw.vco != 0) + return; + + cdclk_state = dev_priv->cdclk.hw; + + /* + * FIXME: + * - The initial CDCLK needs to be read from VBT. + * Need to make this change after VBT has changes for BXT. + */ + if (IS_GEMINILAKE(dev_priv)) { + cdclk_state.cdclk = glk_calc_cdclk(0); + cdclk_state.vco = glk_de_pll_vco(dev_priv, cdclk_state.cdclk); + } else { + cdclk_state.cdclk = bxt_calc_cdclk(0); + cdclk_state.vco = bxt_de_pll_vco(dev_priv, cdclk_state.cdclk); + } + + bxt_set_cdclk(dev_priv, &cdclk_state); +} + +/** + * bxt_uninit_cdclk - Uninitialize CDCLK on BXT + * @dev_priv: i915 device + * + * Uninitialize CDCLK for BXT and derivatives. This is done only + * during the display core uninitialization sequence. + */ +void bxt_uninit_cdclk(struct drm_i915_private *dev_priv) +{ + struct intel_cdclk_state cdclk_state = dev_priv->cdclk.hw; + + cdclk_state.cdclk = cdclk_state.ref; + cdclk_state.vco = 0; + + bxt_set_cdclk(dev_priv, &cdclk_state); +} + +/** + * intel_cdclk_state_compare - Determine if two CDCLK states differ + * @a: first CDCLK state + * @b: second CDCLK state + * + * Returns: + * True if the CDCLK states are identical, false if they differ. + */ +bool intel_cdclk_state_compare(const struct intel_cdclk_state *a, + const struct intel_cdclk_state *b) +{ + return memcmp(a, b, sizeof(*a)) == 0; +} + +/** + * intel_set_cdclk - Push the CDCLK state to the hardware + * @dev_priv: i915 device + * @cdclk_state: new CDCLK state + * + * Program the hardware based on the passed in CDCLK state, + * if necessary. + */ +void intel_set_cdclk(struct drm_i915_private *dev_priv, + const struct intel_cdclk_state *cdclk_state) +{ + if (intel_cdclk_state_compare(&dev_priv->cdclk.hw, cdclk_state)) + return; + + if (WARN_ON_ONCE(!dev_priv->display.set_cdclk)) + return; + + DRM_DEBUG_DRIVER("Changing CDCLK to %d kHz, VCO %d kHz, ref %d kHz\n", + cdclk_state->cdclk, cdclk_state->vco, + cdclk_state->ref); + + dev_priv->display.set_cdclk(dev_priv, cdclk_state); +} + +static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, + int pixel_rate) +{ + struct drm_i915_private *dev_priv = + to_i915(crtc_state->base.crtc->dev); + + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ + if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) + pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + + /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz, + * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else + * there may be audio corruption or screen corruption." This cdclk + * restriction for GLK is 316.8 MHz and since GLK can output two + * pixels per clock, the pixel rate becomes 2 * 316.8 MHz. + */ + if (intel_crtc_has_dp_encoder(crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >= 540000 && + crtc_state->lane_count == 4) { + if (IS_GEMINILAKE(dev_priv)) + pixel_rate = max(2 * 316800, pixel_rate); + else + pixel_rate = max(432000, pixel_rate); + } + + /* According to BSpec, "The CD clock frequency must be at least twice + * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default. + * The check for GLK has to be adjusted as the platform can output + * two pixels per clock. + */ + if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9) { + if (IS_GEMINILAKE(dev_priv)) + pixel_rate = max(2 * 2 * 96000, pixel_rate); + else + pixel_rate = max(2 * 96000, pixel_rate); + } + + return pixel_rate; +} + +/* compute the max rate for new configuration */ +static int intel_max_pixel_rate(struct drm_atomic_state *state) +{ + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + struct drm_i915_private *dev_priv = to_i915(state->dev); + struct drm_crtc *crtc; + struct drm_crtc_state *cstate; + struct intel_crtc_state *crtc_state; + unsigned int max_pixel_rate = 0, i; + enum pipe pipe; + + memcpy(intel_state->min_pixclk, dev_priv->min_pixclk, + sizeof(intel_state->min_pixclk)); + + for_each_new_crtc_in_state(state, crtc, cstate, i) { + int pixel_rate; + + crtc_state = to_intel_crtc_state(cstate); + if (!crtc_state->base.enable) { + intel_state->min_pixclk[i] = 0; + continue; + } + + pixel_rate = crtc_state->pixel_rate; + + if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv)) + pixel_rate = + bdw_adjust_min_pipe_pixel_rate(crtc_state, + pixel_rate); + + intel_state->min_pixclk[i] = pixel_rate; + } + + for_each_pipe(dev_priv, pipe) + max_pixel_rate = max(intel_state->min_pixclk[pipe], + max_pixel_rate); + + return max_pixel_rate; +} + +static int vlv_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct drm_i915_private *dev_priv = to_i915(state->dev); + int max_pixclk = intel_max_pixel_rate(state); + struct intel_atomic_state *intel_state = + to_intel_atomic_state(state); + int cdclk; + + cdclk = vlv_calc_cdclk(dev_priv, max_pixclk); + + if (cdclk > dev_priv->max_cdclk_freq) { + DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n", + cdclk, dev_priv->max_cdclk_freq); + return -EINVAL; + } + + intel_state->cdclk.logical.cdclk = cdclk; + + if (!intel_state->active_crtcs) { + cdclk = vlv_calc_cdclk(dev_priv, 0); + + intel_state->cdclk.actual.cdclk = cdclk; + } else { + intel_state->cdclk.actual = + intel_state->cdclk.logical; + } + + return 0; +} + +static int bdw_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct drm_i915_private *dev_priv = to_i915(state->dev); + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + int max_pixclk = intel_max_pixel_rate(state); + int cdclk; + + /* + * FIXME should also account for plane ratio + * once 64bpp pixel formats are supported. + */ + cdclk = bdw_calc_cdclk(max_pixclk); + + if (cdclk > dev_priv->max_cdclk_freq) { + DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n", + cdclk, dev_priv->max_cdclk_freq); + return -EINVAL; + } + + intel_state->cdclk.logical.cdclk = cdclk; + + if (!intel_state->active_crtcs) { + cdclk = bdw_calc_cdclk(0); + + intel_state->cdclk.actual.cdclk = cdclk; + } else { + intel_state->cdclk.actual = + intel_state->cdclk.logical; + } + + return 0; +} + +static int skl_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct intel_atomic_state *intel_state = to_intel_atomic_state(state); + struct drm_i915_private *dev_priv = to_i915(state->dev); + const int max_pixclk = intel_max_pixel_rate(state); + int cdclk, vco; + + vco = intel_state->cdclk.logical.vco; + if (!vco) + vco = dev_priv->skl_preferred_vco_freq; + + /* + * FIXME should also account for plane ratio + * once 64bpp pixel formats are supported. + */ + cdclk = skl_calc_cdclk(max_pixclk, vco); + + if (cdclk > dev_priv->max_cdclk_freq) { + DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n", + cdclk, dev_priv->max_cdclk_freq); + return -EINVAL; + } + + intel_state->cdclk.logical.vco = vco; + intel_state->cdclk.logical.cdclk = cdclk; + + if (!intel_state->active_crtcs) { + cdclk = skl_calc_cdclk(0, vco); + + intel_state->cdclk.actual.vco = vco; + intel_state->cdclk.actual.cdclk = cdclk; + } else { + intel_state->cdclk.actual = + intel_state->cdclk.logical; + } + + return 0; +} + +static int bxt_modeset_calc_cdclk(struct drm_atomic_state *state) +{ + struct drm_i915_private *dev_priv = to_i915(state->dev); + int max_pixclk = intel_max_pixel_rate(state); + struct intel_atomic_state *intel_state = + to_intel_atomic_state(state); + int cdclk, vco; + + if (IS_GEMINILAKE(dev_priv)) { + cdclk = glk_calc_cdclk(max_pixclk); + vco = glk_de_pll_vco(dev_priv, cdclk); + } else { + cdclk = bxt_calc_cdclk(max_pixclk); + vco = bxt_de_pll_vco(dev_priv, cdclk); + } + + if (cdclk > dev_priv->max_cdclk_freq) { + DRM_DEBUG_KMS("requested cdclk (%d kHz) exceeds max (%d kHz)\n", + cdclk, dev_priv->max_cdclk_freq); + return -EINVAL; + } + + intel_state->cdclk.logical.vco = vco; + intel_state->cdclk.logical.cdclk = cdclk; + + if (!intel_state->active_crtcs) { + if (IS_GEMINILAKE(dev_priv)) { + cdclk = glk_calc_cdclk(0); + vco = glk_de_pll_vco(dev_priv, cdclk); + } else { + cdclk = bxt_calc_cdclk(0); + vco = bxt_de_pll_vco(dev_priv, cdclk); + } + + intel_state->cdclk.actual.vco = vco; + intel_state->cdclk.actual.cdclk = cdclk; + } else { + intel_state->cdclk.actual = + intel_state->cdclk.logical; + } + + return 0; +} + +static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv) +{ + int max_cdclk_freq = dev_priv->max_cdclk_freq; + + if (IS_GEMINILAKE(dev_priv)) + return 2 * max_cdclk_freq; + else if (INTEL_INFO(dev_priv)->gen >= 9 || + IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) + return max_cdclk_freq; + else if (IS_CHERRYVIEW(dev_priv)) + return max_cdclk_freq*95/100; + else if (INTEL_INFO(dev_priv)->gen < 4) + return 2*max_cdclk_freq*90/100; + else + return max_cdclk_freq*90/100; +} + +/** + * intel_update_max_cdclk - Determine the maximum support CDCLK frequency + * @dev_priv: i915 device + * + * Determine the maximum CDCLK frequency the platform supports, and also + * derive the maximum dot clock frequency the maximum CDCLK frequency + * allows. + */ +void intel_update_max_cdclk(struct drm_i915_private *dev_priv) +{ + if (IS_GEN9_BC(dev_priv)) { + u32 limit = I915_READ(SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK; + int max_cdclk, vco; + + vco = dev_priv->skl_preferred_vco_freq; + WARN_ON(vco != 8100000 && vco != 8640000); + + /* + * Use the lower (vco 8640) cdclk values as a + * first guess. skl_calc_cdclk() will correct it + * if the preferred vco is 8100 instead. + */ + if (limit == SKL_DFSM_CDCLK_LIMIT_675) + max_cdclk = 617143; + else if (limit == SKL_DFSM_CDCLK_LIMIT_540) + max_cdclk = 540000; + else if (limit == SKL_DFSM_CDCLK_LIMIT_450) + max_cdclk = 432000; + else + max_cdclk = 308571; + + dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco); + } else if (IS_GEMINILAKE(dev_priv)) { + dev_priv->max_cdclk_freq = 316800; + } else if (IS_BROXTON(dev_priv)) { + dev_priv->max_cdclk_freq = 624000; + } else if (IS_BROADWELL(dev_priv)) { + /* + * FIXME with extra cooling we can allow + * 540 MHz for ULX and 675 Mhz for ULT. + * How can we know if extra cooling is + * available? PCI ID, VTB, something else? + */ + if (I915_READ(FUSE_STRAP) & HSW_CDCLK_LIMIT) + dev_priv->max_cdclk_freq = 450000; + else if (IS_BDW_ULX(dev_priv)) + dev_priv->max_cdclk_freq = 450000; + else if (IS_BDW_ULT(dev_priv)) + dev_priv->max_cdclk_freq = 540000; + else + dev_priv->max_cdclk_freq = 675000; + } else if (IS_CHERRYVIEW(dev_priv)) { + dev_priv->max_cdclk_freq = 320000; + } else if (IS_VALLEYVIEW(dev_priv)) { + dev_priv->max_cdclk_freq = 400000; + } else { + /* otherwise assume cdclk is fixed */ + dev_priv->max_cdclk_freq = dev_priv->cdclk.hw.cdclk; + } + + dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv); + + DRM_DEBUG_DRIVER("Max CD clock rate: %d kHz\n", + dev_priv->max_cdclk_freq); + + DRM_DEBUG_DRIVER("Max dotclock rate: %d kHz\n", + dev_priv->max_dotclk_freq); +} + +/** + * intel_update_cdclk - Determine the current CDCLK frequency + * @dev_priv: i915 device + * + * Determine the current CDCLK frequency. + */ +void intel_update_cdclk(struct drm_i915_private *dev_priv) +{ + dev_priv->display.get_cdclk(dev_priv, &dev_priv->cdclk.hw); + + DRM_DEBUG_DRIVER("Current CD clock rate: %d kHz, VCO: %d kHz, ref: %d kHz\n", + dev_priv->cdclk.hw.cdclk, dev_priv->cdclk.hw.vco, + dev_priv->cdclk.hw.ref); + + /* + * 9:0 CMBUS [sic] CDCLK frequency (cdfreq): + * Programmng [sic] note: bit[9:2] should be programmed to the number + * of cdclk that generates 4MHz reference clock freq which is used to + * generate GMBus clock. This will vary with the cdclk freq. + */ + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + I915_WRITE(GMBUSFREQ_VLV, + DIV_ROUND_UP(dev_priv->cdclk.hw.cdclk, 1000)); +} + +static int pch_rawclk(struct drm_i915_private *dev_priv) +{ + return (I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000; +} + +static int vlv_hrawclk(struct drm_i915_private *dev_priv) +{ + /* RAWCLK_FREQ_VLV register updated from power well code */ + return vlv_get_cck_clock_hpll(dev_priv, "hrawclk", + CCK_DISPLAY_REF_CLOCK_CONTROL); +} + +static int g4x_hrawclk(struct drm_i915_private *dev_priv) +{ + uint32_t clkcfg; + + /* hrawclock is 1/4 the FSB frequency */ + clkcfg = I915_READ(CLKCFG); + switch (clkcfg & CLKCFG_FSB_MASK) { + case CLKCFG_FSB_400: + return 100000; + case CLKCFG_FSB_533: + return 133333; + case CLKCFG_FSB_667: + return 166667; + case CLKCFG_FSB_800: + return 200000; + case CLKCFG_FSB_1067: + return 266667; + case CLKCFG_FSB_1333: + return 333333; + /* these two are just a guess; one of them might be right */ + case CLKCFG_FSB_1600: + case CLKCFG_FSB_1600_ALT: + return 400000; + default: + return 133333; + } +} + +/** + * intel_update_rawclk - Determine the current RAWCLK frequency + * @dev_priv: i915 device + * + * Determine the current RAWCLK frequency. RAWCLK is a fixed + * frequency clock so this needs to done only once. + */ +void intel_update_rawclk(struct drm_i915_private *dev_priv) +{ + if (HAS_PCH_SPLIT(dev_priv)) + dev_priv->rawclk_freq = pch_rawclk(dev_priv); + else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + dev_priv->rawclk_freq = vlv_hrawclk(dev_priv); + else if (IS_G4X(dev_priv) || IS_PINEVIEW(dev_priv)) + dev_priv->rawclk_freq = g4x_hrawclk(dev_priv); + else + /* no rawclk on other platforms, or no need to know it */ + return; + + DRM_DEBUG_DRIVER("rawclk rate: %d kHz\n", dev_priv->rawclk_freq); +} + +/** + * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks + * @dev_priv: i915 device + */ +void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv) +{ + if (IS_CHERRYVIEW(dev_priv)) { + dev_priv->display.set_cdclk = chv_set_cdclk; + dev_priv->display.modeset_calc_cdclk = + vlv_modeset_calc_cdclk; + } else if (IS_VALLEYVIEW(dev_priv)) { + dev_priv->display.set_cdclk = vlv_set_cdclk; + dev_priv->display.modeset_calc_cdclk = + vlv_modeset_calc_cdclk; + } else if (IS_BROADWELL(dev_priv)) { + dev_priv->display.set_cdclk = bdw_set_cdclk; + dev_priv->display.modeset_calc_cdclk = + bdw_modeset_calc_cdclk; + } else if (IS_GEN9_LP(dev_priv)) { + dev_priv->display.set_cdclk = bxt_set_cdclk; + dev_priv->display.modeset_calc_cdclk = + bxt_modeset_calc_cdclk; + } else if (IS_GEN9_BC(dev_priv)) { + dev_priv->display.set_cdclk = skl_set_cdclk; + dev_priv->display.modeset_calc_cdclk = + skl_modeset_calc_cdclk; + } + + if (IS_GEN9_BC(dev_priv)) + dev_priv->display.get_cdclk = skl_get_cdclk; + else if (IS_GEN9_LP(dev_priv)) + dev_priv->display.get_cdclk = bxt_get_cdclk; + else if (IS_BROADWELL(dev_priv)) + dev_priv->display.get_cdclk = bdw_get_cdclk; + else if (IS_HASWELL(dev_priv)) + dev_priv->display.get_cdclk = hsw_get_cdclk; + else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) + dev_priv->display.get_cdclk = vlv_get_cdclk; + else if (IS_GEN6(dev_priv) || IS_IVYBRIDGE(dev_priv)) + dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; + else if (IS_GEN5(dev_priv)) + dev_priv->display.get_cdclk = fixed_450mhz_get_cdclk; + else if (IS_GM45(dev_priv)) + dev_priv->display.get_cdclk = gm45_get_cdclk; + else if (IS_G45(dev_priv)) + dev_priv->display.get_cdclk = g33_get_cdclk; + else if (IS_I965GM(dev_priv)) + dev_priv->display.get_cdclk = i965gm_get_cdclk; + else if (IS_I965G(dev_priv)) + dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; + else if (IS_PINEVIEW(dev_priv)) + dev_priv->display.get_cdclk = pnv_get_cdclk; + else if (IS_G33(dev_priv)) + dev_priv->display.get_cdclk = g33_get_cdclk; + else if (IS_I945GM(dev_priv)) + dev_priv->display.get_cdclk = i945gm_get_cdclk; + else if (IS_I945G(dev_priv)) + dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk; + else if (IS_I915GM(dev_priv)) + dev_priv->display.get_cdclk = i915gm_get_cdclk; + else if (IS_I915G(dev_priv)) + dev_priv->display.get_cdclk = fixed_333mhz_get_cdclk; + else if (IS_I865G(dev_priv)) + dev_priv->display.get_cdclk = fixed_266mhz_get_cdclk; + else if (IS_I85X(dev_priv)) + dev_priv->display.get_cdclk = i85x_get_cdclk; + else if (IS_I845G(dev_priv)) + dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk; + else { /* 830 */ + WARN(!IS_I830(dev_priv), + "Unknown platform. Assuming 133 MHz CDCLK\n"); + dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk; + } +} |