diff options
Diffstat (limited to 'drivers/firmware')
| -rw-r--r-- | drivers/firmware/raspberrypi.c | 61 |
1 files changed, 0 insertions, 61 deletions
diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index 8f2fb4c562da..2371d08bdd17 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -12,8 +12,6 @@ #include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/slab.h> -#include <linux/pci.h> -#include <linux/delay.h> #include <soc/bcm2835/raspberrypi-firmware.h> #define MBOX_MSG(chan, data28) (((data28) & ~0xf) | ((chan) & 0xf)) @@ -21,8 +19,6 @@ #define MBOX_DATA28(msg) ((msg) & ~0xf) #define MBOX_CHAN_PROPERTY 8 -#define VL805_PCI_CONFIG_VERSION_OFFSET 0x50 - static struct platform_device *rpi_hwmon; static struct platform_device *rpi_clk; @@ -301,63 +297,6 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) } EXPORT_SYMBOL_GPL(rpi_firmware_get); -/* - * The Raspberry Pi 4 gets its USB functionality from VL805, a PCIe chip that - * implements xHCI. After a PCI reset, VL805's firmware may either be loaded - * directly from an EEPROM or, if not present, by the SoC's co-processor, - * VideoCore. RPi4's VideoCore OS contains both the non public firmware load - * logic and the VL805 firmware blob. This function triggers the aforementioned - * process. - */ -int rpi_firmware_init_vl805(struct pci_dev *pdev) -{ - struct device_node *fw_np; - struct rpi_firmware *fw; - u32 dev_addr, version; - int ret; - - fw_np = of_find_compatible_node(NULL, NULL, - "raspberrypi,bcm2835-firmware"); - if (!fw_np) - return 0; - - fw = rpi_firmware_get(fw_np); - of_node_put(fw_np); - if (!fw) - return -ENODEV; - - /* - * Make sure we don't trigger a firmware load unnecessarily. - * - * If something went wrong with PCI, this whole exercise would be - * futile as VideoCore expects from us a configured PCI bus. Just take - * the faulty version (likely ~0) and let xHCI's registration fail - * further down the line. - */ - pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, &version); - if (version) - goto exit; - - dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 | - PCI_FUNC(pdev->devfn) << 12; - - ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, - &dev_addr, sizeof(dev_addr)); - if (ret) - return ret; - - /* Wait for vl805 to startup */ - usleep_range(200, 1000); - - pci_read_config_dword(pdev, VL805_PCI_CONFIG_VERSION_OFFSET, - &version); -exit: - pci_info(pdev, "VL805 firmware version %08x\n", version); - - return 0; -} -EXPORT_SYMBOL_GPL(rpi_firmware_init_vl805); - static const struct of_device_id rpi_firmware_of_match[] = { { .compatible = "raspberrypi,bcm2835-firmware", }, {}, |