diff options
Diffstat (limited to 'drivers/cpufreq/s3c24xx-cpufreq.c')
| -rw-r--r-- | drivers/cpufreq/s3c24xx-cpufreq.c | 648 |
1 files changed, 0 insertions, 648 deletions
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c deleted file mode 100644 index 7380c32b238e..000000000000 --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ /dev/null @@ -1,648 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2006-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX CPU Frequency scaling -*/ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/cpufreq.h> -#include <linux/cpu.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/device.h> -#include <linux/sysfs.h> -#include <linux/slab.h> -#include <linux/soc/samsung/s3c-cpufreq-core.h> -#include <linux/soc/samsung/s3c-pm.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -/* note, cpufreq support deals in kHz, no Hz */ -static struct cpufreq_driver s3c24xx_driver; -static struct s3c_cpufreq_config cpu_cur; -static struct s3c_iotimings s3c24xx_iotiming; -static struct cpufreq_frequency_table *pll_reg; -static unsigned int last_target = ~0; -static unsigned int ftab_size; -static struct cpufreq_frequency_table *ftab; - -static struct clk *_clk_mpll; -static struct clk *_clk_xtal; -static struct clk *clk_fclk; -static struct clk *clk_hclk; -static struct clk *clk_pclk; -static struct clk *clk_arm; - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS -struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void) -{ - return &cpu_cur; -} - -struct s3c_iotimings *s3c_cpufreq_getiotimings(void) -{ - return &s3c24xx_iotiming; -} -#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS */ - -static void s3c_cpufreq_getcur(struct s3c_cpufreq_config *cfg) -{ - unsigned long fclk, pclk, hclk, armclk; - - cfg->freq.fclk = fclk = clk_get_rate(clk_fclk); - cfg->freq.hclk = hclk = clk_get_rate(clk_hclk); - cfg->freq.pclk = pclk = clk_get_rate(clk_pclk); - cfg->freq.armclk = armclk = clk_get_rate(clk_arm); - - cfg->pll.driver_data = s3c24xx_read_mpllcon(); - cfg->pll.frequency = fclk; - - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); - - cfg->divs.h_divisor = fclk / hclk; - cfg->divs.p_divisor = fclk / pclk; -} - -static inline void s3c_cpufreq_calc(struct s3c_cpufreq_config *cfg) -{ - unsigned long pll = cfg->pll.frequency; - - cfg->freq.fclk = pll; - cfg->freq.hclk = pll / cfg->divs.h_divisor; - cfg->freq.pclk = pll / cfg->divs.p_divisor; - - /* convert hclk into 10ths of nanoseconds for io calcs */ - cfg->freq.hclk_tns = 1000000000 / (cfg->freq.hclk / 10); -} - -static inline int closer(unsigned int target, unsigned int n, unsigned int c) -{ - int diff_cur = abs(target - c); - int diff_new = abs(target - n); - - return (diff_new < diff_cur); -} - -static void s3c_cpufreq_show(const char *pfx, - struct s3c_cpufreq_config *cfg) -{ - s3c_freq_dbg("%s: Fvco=%u, F=%lu, A=%lu, H=%lu (%u), P=%lu (%u)\n", - pfx, cfg->pll.frequency, cfg->freq.fclk, cfg->freq.armclk, - cfg->freq.hclk, cfg->divs.h_divisor, - cfg->freq.pclk, cfg->divs.p_divisor); -} - -/* functions to wrapper the driver info calls to do the cpu specific work */ - -static void s3c_cpufreq_setio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->set_iotiming) - (cfg->info->set_iotiming)(cfg, &s3c24xx_iotiming); -} - -static int s3c_cpufreq_calcio(struct s3c_cpufreq_config *cfg) -{ - if (cfg->info->calc_iotiming) - return (cfg->info->calc_iotiming)(cfg, &s3c24xx_iotiming); - - return 0; -} - -static void s3c_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_refresh)(cfg); -} - -static void s3c_cpufreq_setdivs(struct s3c_cpufreq_config *cfg) -{ - (cfg->info->set_divs)(cfg); -} - -static int s3c_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg) -{ - return (cfg->info->calc_divs)(cfg); -} - -static void s3c_cpufreq_setfvco(struct s3c_cpufreq_config *cfg) -{ - cfg->mpll = _clk_mpll; - (cfg->info->set_fvco)(cfg); -} - -static inline void s3c_cpufreq_updateclk(struct clk *clk, - unsigned int freq) -{ - clk_set_rate(clk, freq); -} - -static int s3c_cpufreq_settarget(struct cpufreq_policy *policy, - unsigned int target_freq, - struct cpufreq_frequency_table *pll) -{ - struct s3c_cpufreq_freqs freqs; - struct s3c_cpufreq_config cpu_new; - unsigned long flags; - - cpu_new = cpu_cur; /* copy new from current */ - - s3c_cpufreq_show("cur", &cpu_cur); - - /* TODO - check for DMA currently outstanding */ - - cpu_new.pll = pll ? *pll : cpu_cur.pll; - - if (pll) - freqs.pll_changing = 1; - - /* update our frequencies */ - - cpu_new.freq.armclk = target_freq; - cpu_new.freq.fclk = cpu_new.pll.frequency; - - if (s3c_cpufreq_calcdivs(&cpu_new) < 0) { - pr_err("no divisors for %d\n", target_freq); - goto err_notpossible; - } - - s3c_freq_dbg("%s: got divs\n", __func__); - - s3c_cpufreq_calc(&cpu_new); - - s3c_freq_dbg("%s: calculated frequencies for new\n", __func__); - - if (cpu_new.freq.hclk != cpu_cur.freq.hclk) { - if (s3c_cpufreq_calcio(&cpu_new) < 0) { - pr_err("%s: no IO timings\n", __func__); - goto err_notpossible; - } - } - - s3c_cpufreq_show("new", &cpu_new); - - /* setup our cpufreq parameters */ - - freqs.old = cpu_cur.freq; - freqs.new = cpu_new.freq; - - freqs.freqs.old = cpu_cur.freq.armclk / 1000; - freqs.freqs.new = cpu_new.freq.armclk / 1000; - - /* update f/h/p clock settings before we issue the change - * notification, so that drivers do not need to do anything - * special if they want to recalculate on CPUFREQ_PRECHANGE. */ - - s3c_cpufreq_updateclk(_clk_mpll, cpu_new.pll.frequency); - s3c_cpufreq_updateclk(clk_fclk, cpu_new.freq.fclk); - s3c_cpufreq_updateclk(clk_hclk, cpu_new.freq.hclk); - s3c_cpufreq_updateclk(clk_pclk, cpu_new.freq.pclk); - - /* start the frequency change */ - cpufreq_freq_transition_begin(policy, &freqs.freqs); - - /* If hclk is staying the same, then we do not need to - * re-write the IO or the refresh timings whilst we are changing - * speed. */ - - local_irq_save(flags); - - /* is our memory clock slowing down? */ - if (cpu_new.freq.hclk < cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - if (cpu_new.freq.fclk == cpu_cur.freq.fclk) { - /* not changing PLL, just set the divisors */ - - s3c_cpufreq_setdivs(&cpu_new); - } else { - if (cpu_new.freq.fclk < cpu_cur.freq.fclk) { - /* slow the cpu down, then set divisors */ - - s3c_cpufreq_setfvco(&cpu_new); - s3c_cpufreq_setdivs(&cpu_new); - } else { - /* set the divisors, then speed up */ - - s3c_cpufreq_setdivs(&cpu_new); - s3c_cpufreq_setfvco(&cpu_new); - } - } - - /* did our memory clock speed up */ - if (cpu_new.freq.hclk > cpu_cur.freq.hclk) { - s3c_cpufreq_setrefresh(&cpu_new); - s3c_cpufreq_setio(&cpu_new); - } - - /* update our current settings */ - cpu_cur = cpu_new; - - local_irq_restore(flags); - - /* notify everyone we've done this */ - cpufreq_freq_transition_end(policy, &freqs.freqs, 0); - - s3c_freq_dbg("%s: finished\n", __func__); - return 0; - - err_notpossible: - pr_err("no compatible settings for %d\n", target_freq); - return -EINVAL; -} - -/* s3c_cpufreq_target - * - * called by the cpufreq core to adjust the frequency that the CPU - * is currently running at. - */ - -static int s3c_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_frequency_table *pll; - unsigned int index; - - /* avoid repeated calls which cause a needless amout of duplicated - * logging output (and CPU time as the calculation process is - * done) */ - if (target_freq == last_target) - return 0; - - last_target = target_freq; - - s3c_freq_dbg("%s: policy %p, target %u, relation %u\n", - __func__, policy, target_freq, relation); - - if (ftab) { - index = cpufreq_frequency_table_target(policy, target_freq, - relation); - - s3c_freq_dbg("%s: adjust %d to entry %d (%u)\n", __func__, - target_freq, index, ftab[index].frequency); - target_freq = ftab[index].frequency; - } - - target_freq *= 1000; /* convert target to Hz */ - - /* find the settings for our new frequency */ - - if (!pll_reg || cpu_cur.lock_pll) { - /* either we've not got any PLL values, or we've locked - * to the current one. */ - pll = NULL; - } else { - struct cpufreq_policy tmp_policy; - - /* we keep the cpu pll table in Hz, to ensure we get an - * accurate value for the PLL output. */ - - tmp_policy.min = policy->min * 1000; - tmp_policy.max = policy->max * 1000; - tmp_policy.cpu = policy->cpu; - tmp_policy.freq_table = pll_reg; - - /* cpufreq_frequency_table_target returns the index - * of the table entry, not the value of - * the table entry's index field. */ - - index = cpufreq_frequency_table_target(&tmp_policy, target_freq, - relation); - pll = pll_reg + index; - - s3c_freq_dbg("%s: target %u => %u\n", - __func__, target_freq, pll->frequency); - - target_freq = pll->frequency; - } - - return s3c_cpufreq_settarget(policy, target_freq, pll); -} - -struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name) -{ - struct clk *clk; - - clk = clk_get(dev, name); - if (IS_ERR(clk)) - pr_err("failed to get clock '%s'\n", name); - - return clk; -} - -static int s3c_cpufreq_init(struct cpufreq_policy *policy) -{ - policy->clk = clk_arm; - policy->cpuinfo.transition_latency = cpu_cur.info->latency; - policy->freq_table = ftab; - - return 0; -} - -static int __init s3c_cpufreq_initclks(void) -{ - _clk_mpll = s3c_cpufreq_clk_get(NULL, "mpll"); - _clk_xtal = s3c_cpufreq_clk_get(NULL, "xtal"); - clk_fclk = s3c_cpufreq_clk_get(NULL, "fclk"); - clk_hclk = s3c_cpufreq_clk_get(NULL, "hclk"); - clk_pclk = s3c_cpufreq_clk_get(NULL, "pclk"); - clk_arm = s3c_cpufreq_clk_get(NULL, "armclk"); - - if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) || - IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) { - pr_err("%s: could not get clock(s)\n", __func__); - return -ENOENT; - } - - pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", - __func__, - clk_get_rate(clk_fclk) / 1000, - clk_get_rate(clk_hclk) / 1000, - clk_get_rate(clk_pclk) / 1000, - clk_get_rate(clk_arm) / 1000); - - return 0; -} - -#ifdef CONFIG_PM -static struct cpufreq_frequency_table suspend_pll; -static unsigned int suspend_freq; - -static int s3c_cpufreq_suspend(struct cpufreq_policy *policy) -{ - suspend_pll.frequency = clk_get_rate(_clk_mpll); - suspend_pll.driver_data = s3c24xx_read_mpllcon(); - suspend_freq = clk_get_rate(clk_arm); - - return 0; -} - -static int s3c_cpufreq_resume(struct cpufreq_policy *policy) -{ - int ret; - - s3c_freq_dbg("%s: resuming with policy %p\n", __func__, policy); - - last_target = ~0; /* invalidate last_target setting */ - - /* whilst we will be called later on, we try and re-set the - * cpu frequencies as soon as possible so that we do not end - * up resuming devices and then immediately having to re-set - * a number of settings once these devices have restarted. - * - * as a note, it is expected devices are not used until they - * have been un-suspended and at that time they should have - * used the updated clock settings. - */ - - ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll); - if (ret) { - pr_err("%s: failed to reset pll/freq\n", __func__); - return ret; - } - - return 0; -} -#else -#define s3c_cpufreq_resume NULL -#define s3c_cpufreq_suspend NULL -#endif - -static struct cpufreq_driver s3c24xx_driver = { - .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .target = s3c_cpufreq_target, - .get = cpufreq_generic_get, - .init = s3c_cpufreq_init, - .suspend = s3c_cpufreq_suspend, - .resume = s3c_cpufreq_resume, - .name = "s3c24xx", -}; - - -int s3c_cpufreq_register(struct s3c_cpufreq_info *info) -{ - if (!info || !info->name) { - pr_err("%s: failed to pass valid information\n", __func__); - return -EINVAL; - } - - pr_info("S3C24XX CPU Frequency driver, %s cpu support\n", - info->name); - - /* check our driver info has valid data */ - - BUG_ON(info->set_refresh == NULL); - BUG_ON(info->set_divs == NULL); - BUG_ON(info->calc_divs == NULL); - - /* info->set_fvco is optional, depending on whether there - * is a need to set the clock code. */ - - cpu_cur.info = info; - - /* Note, driver registering should probably update locktime */ - - return 0; -} - -int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) -{ - struct s3c_cpufreq_board *ours; - - if (!board) { - pr_info("%s: no board data\n", __func__); - return -EINVAL; - } - - /* Copy the board information so that each board can make this - * initdata. */ - - ours = kzalloc(sizeof(*ours), GFP_KERNEL); - if (!ours) - return -ENOMEM; - - *ours = *board; - cpu_cur.board = ours; - - return 0; -} - -static int __init s3c_cpufreq_auto_io(void) -{ - int ret; - - if (!cpu_cur.info->get_iotiming) { - pr_err("%s: get_iotiming undefined\n", __func__); - return -ENOENT; - } - - pr_info("%s: working out IO settings\n", __func__); - - ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming); - if (ret) - pr_err("%s: failed to get timings\n", __func__); - - return ret; -} - -/* if one or is zero, then return the other, otherwise return the min */ -#define do_min(_a, _b) ((_a) == 0 ? (_b) : (_b) == 0 ? (_a) : min(_a, _b)) - -/** - * s3c_cpufreq_freq_min - find the minimum settings for the given freq. - * @dst: The destination structure - * @a: One argument. - * @b: The other argument. - * - * Create a minimum of each frequency entry in the 'struct s3c_freq', - * unless the entry is zero when it is ignored and the non-zero argument - * used. - */ -static void s3c_cpufreq_freq_min(struct s3c_freq *dst, - struct s3c_freq *a, struct s3c_freq *b) -{ - dst->fclk = do_min(a->fclk, b->fclk); - dst->hclk = do_min(a->hclk, b->hclk); - dst->pclk = do_min(a->pclk, b->pclk); - dst->armclk = do_min(a->armclk, b->armclk); -} - -static inline u32 calc_locktime(u32 freq, u32 time_us) -{ - u32 result; - - result = freq * time_us; - result = DIV_ROUND_UP(result, 1000 * 1000); - - return result; -} - -static void s3c_cpufreq_update_loctkime(void) -{ - unsigned int bits = cpu_cur.info->locktime_bits; - u32 rate = (u32)clk_get_rate(_clk_xtal); - u32 val; - - if (bits == 0) { - WARN_ON(1); - return; - } - - val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits; - val |= calc_locktime(rate, cpu_cur.info->locktime_m); - - pr_info("%s: new locktime is 0x%08x\n", __func__, val); - s3c24xx_write_locktime(val); -} - -static int s3c_cpufreq_build_freq(void) -{ - int size, ret; - - kfree(ftab); - - size = cpu_cur.info->calc_freqtable(&cpu_cur, NULL, 0); - size++; - - ftab = kcalloc(size, sizeof(*ftab), GFP_KERNEL); - if (!ftab) - return -ENOMEM; - - ftab_size = size; - - ret = cpu_cur.info->calc_freqtable(&cpu_cur, ftab, size); - s3c_cpufreq_addfreq(ftab, ret, size, CPUFREQ_TABLE_END); - - return 0; -} - -static int __init s3c_cpufreq_initcall(void) -{ - int ret = 0; - - if (cpu_cur.info && cpu_cur.board) { - ret = s3c_cpufreq_initclks(); - if (ret) - goto out; - - /* get current settings */ - s3c_cpufreq_getcur(&cpu_cur); - s3c_cpufreq_show("cur", &cpu_cur); - - if (cpu_cur.board->auto_io) { - ret = s3c_cpufreq_auto_io(); - if (ret) { - pr_err("%s: failed to get io timing\n", - __func__); - goto out; - } - } - - if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) { - pr_err("%s: no IO support registered\n", __func__); - ret = -EINVAL; - goto out; - } - - if (!cpu_cur.info->need_pll) - cpu_cur.lock_pll = 1; - - s3c_cpufreq_update_loctkime(); - - s3c_cpufreq_freq_min(&cpu_cur.max, &cpu_cur.board->max, - &cpu_cur.info->max); - - if (cpu_cur.info->calc_freqtable) - s3c_cpufreq_build_freq(); - - ret = cpufreq_register_driver(&s3c24xx_driver); - } - - out: - return ret; -} - -late_initcall(s3c_cpufreq_initcall); - -/** - * s3c_plltab_register - register CPU PLL table. - * @plls: The list of PLL entries. - * @plls_no: The size of the PLL entries @plls. - * - * Register the given set of PLLs with the system. - */ -int s3c_plltab_register(struct cpufreq_frequency_table *plls, - unsigned int plls_no) -{ - struct cpufreq_frequency_table *vals; - unsigned int size; - - size = sizeof(*vals) * (plls_no + 1); - - vals = kzalloc(size, GFP_KERNEL); - if (vals) { - memcpy(vals, plls, size); - pll_reg = vals; - - /* write a terminating entry, we don't store it in the - * table that is stored in the kernel */ - vals += plls_no; - vals->frequency = CPUFREQ_TABLE_END; - - pr_info("%d PLL entries\n", plls_no); - } else - pr_err("no memory for PLL tables\n"); - - return vals ? 0 : -ENOMEM; -} |