diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/ahci.c | 67 | ||||
-rw-r--r-- | drivers/ata/ahci.h | 2 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 19 |
3 files changed, 61 insertions, 27 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index cdfbcc54821f..594fcabd22cd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1306,15 +1306,13 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host) #endif /* - * ahci_init_msix() only implements single MSI-X support, not multiple - * MSI-X per-port interrupts. This is needed for host controllers that only - * have MSI-X support implemented, but no MSI or intx. + * ahci_init_msix() - optionally enable per-port MSI-X otherwise defer + * to single msi. */ static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports, - struct ahci_host_priv *hpriv) + struct ahci_host_priv *hpriv, unsigned long flags) { - int rc, nvec; - struct msix_entry entry = {}; + int nvec, i, rc; /* Do not init MSI-X if MSI is disabled for the device */ if (hpriv->flags & AHCI_HFLAG_NO_MSI) @@ -1324,22 +1322,39 @@ static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports, if (nvec < 0) return nvec; - if (!nvec) { + /* + * Proper MSI-X implementations will have a vector per-port. + * Barring that, we prefer single-MSI over single-MSIX. If this + * check fails (not enough MSI-X vectors for all ports) we will + * be called again with the flag clear iff ahci_init_msi() + * fails. + */ + if (flags & AHCI_HFLAG_MULTI_MSIX) { + if (nvec < n_ports) + return -ENODEV; + nvec = n_ports; + } else if (nvec) { + nvec = 1; + } else { + /* + * Emit dev_err() since this was the non-legacy irq + * method of last resort. + */ rc = -ENODEV; goto fail; } - /* - * There can be more than one vector (e.g. for error detection or - * hdd hotplug). Only the first vector (entry.entry = 0) is used. - */ - rc = pci_enable_msix_exact(pdev, &entry, 1); + for (i = 0; i < nvec; i++) + hpriv->msix[i].entry = i; + rc = pci_enable_msix_exact(pdev, hpriv->msix, nvec); if (rc < 0) goto fail; - hpriv->irq = entry.vector; + if (nvec > 1) + hpriv->flags |= AHCI_HFLAG_MULTI_MSIX; + hpriv->irq = hpriv->msix[0].vector; /* for single msi-x */ - return 1; + return nvec; fail: dev_err(&pdev->dev, "failed to enable MSI-X with error %d, # of vectors: %d\n", @@ -1403,20 +1418,25 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, { int nvec; + /* + * Try to enable per-port MSI-X. If the host is not capable + * fall back to single MSI before finally attempting single + * MSI-X. + */ + nvec = ahci_init_msix(pdev, n_ports, hpriv, AHCI_HFLAG_MULTI_MSIX); + if (nvec >= 0) + return nvec; + nvec = ahci_init_msi(pdev, n_ports, hpriv); if (nvec >= 0) return nvec; - /* - * Currently, MSI-X support only implements single IRQ mode and - * exists for controllers which can't do other types of IRQ. Only - * set it up if MSI fails. - */ - nvec = ahci_init_msix(pdev, n_ports, hpriv); + /* try single-msix */ + nvec = ahci_init_msix(pdev, n_ports, hpriv, 0); if (nvec >= 0) return nvec; - /* lagacy intx interrupts */ + /* legacy intx interrupts */ pci_intx(pdev, 1); hpriv->irq = pdev->irq; @@ -1578,7 +1598,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (!host) return -ENOMEM; host->private_data = hpriv; - + hpriv->msix = devm_kzalloc(&pdev->dev, + sizeof(struct msix_entry) * n_ports, GFP_KERNEL); + if (!hpriv->msix) + return -ENOMEM; ahci_init_interrupts(pdev, n_ports, hpriv); if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 45586c1dbbdc..9e60c50b2103 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -242,6 +242,7 @@ enum { AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */ AHCI_HFLAG_EDGE_IRQ = (1 << 19), /* HOST_IRQ_STAT behaves as Edge Triggered */ + AHCI_HFLAG_MULTI_MSIX = (1 << 20), /* per-port MSI-X */ /* ap->flags bits */ @@ -343,6 +344,7 @@ struct ahci_host_priv { * the PHY position in this array. */ struct phy **phys; + struct msix_entry *msix; /* Optional MSI-X support */ unsigned nports; /* Number of ports */ void *plat_data; /* Other platform data */ unsigned int irq; /* interrupt line */ diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 096064cd6c52..0a5645fb02f8 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -43,6 +43,7 @@ #include <scsi/scsi_host.h> #include <scsi/scsi_cmnd.h> #include <linux/libata.h> +#include <linux/pci.h> #include "ahci.h" #include "libata.h" @@ -2470,9 +2471,10 @@ void ahci_set_em_messages(struct ahci_host_priv *hpriv, } EXPORT_SYMBOL_GPL(ahci_set_em_messages); -static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq, +static int ahci_host_activate_multi_irqs(struct ata_host *host, struct scsi_host_template *sht) { + struct ahci_host_priv *hpriv = host->private_data; int i, rc; rc = ata_host_start(host); @@ -2484,6 +2486,12 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq, */ for (i = 0; i < host->n_ports; i++) { struct ahci_port_priv *pp = host->ports[i]->private_data; + int irq; + + if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX) + irq = hpriv->msix[i].vector; + else + irq = hpriv->irq + i; /* Do not receive interrupts sent by dummy ports */ if (!pp) { @@ -2491,14 +2499,15 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq, continue; } - rc = devm_request_threaded_irq(host->dev, irq + i, + rc = devm_request_threaded_irq(host->dev, irq, ahci_multi_irqs_intr, ahci_port_thread_fn, 0, pp->irq_desc, host->ports[i]); if (rc) return rc; - ata_port_desc(host->ports[i], "irq %d", irq + i); + ata_port_desc(host->ports[i], "irq %d", irq); } + return ata_host_register(host, sht); } @@ -2519,8 +2528,8 @@ int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht) int irq = hpriv->irq; int rc; - if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) - rc = ahci_host_activate_multi_irqs(host, irq, sht); + if (hpriv->flags & (AHCI_HFLAG_MULTI_MSI | AHCI_HFLAG_MULTI_MSIX)) + rc = ahci_host_activate_multi_irqs(host, sht); else if (hpriv->flags & AHCI_HFLAG_EDGE_IRQ) rc = ata_host_activate(host, irq, ahci_single_edge_irq_intr, IRQF_SHARED, sht); |