summaryrefslogtreecommitdiff
path: root/drivers/ata/libata-sff.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libata-sff.c')
-rw-r--r--drivers/ata/libata-sff.c1121
1 files changed, 1121 insertions, 0 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
new file mode 100644
index 000000000000..688bb55e197a
--- /dev/null
+++ b/drivers/ata/libata-sff.c
@@ -0,0 +1,1121 @@
+/*
+ * libata-bmdma.c - helper library for PCI IDE BMDMA
+ *
+ * Maintained by: Jeff Garzik <jgarzik@pobox.com>
+ * Please ALWAYS copy linux-ide@vger.kernel.org
+ * on emails.
+ *
+ * Copyright 2003-2006 Red Hat, Inc. All rights reserved.
+ * Copyright 2003-2006 Jeff Garzik
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * libata documentation is available via 'make {ps|pdf}docs',
+ * as Documentation/DocBook/libata.*
+ *
+ * Hardware documentation available from http://www.t13.org/ and
+ * http://www.sata-io.org/
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/libata.h>
+
+#include "libata.h"
+
+/**
+ * ata_tf_load_pio - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ outb(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ outb(tf->hob_feature, ioaddr->feature_addr);
+ outb(tf->hob_nsect, ioaddr->nsect_addr);
+ outb(tf->hob_lbal, ioaddr->lbal_addr);
+ outb(tf->hob_lbam, ioaddr->lbam_addr);
+ outb(tf->hob_lbah, ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+
+ if (is_addr) {
+ outb(tf->feature, ioaddr->feature_addr);
+ outb(tf->nsect, ioaddr->nsect_addr);
+ outb(tf->lbal, ioaddr->lbal_addr);
+ outb(tf->lbam, ioaddr->lbam_addr);
+ outb(tf->lbah, ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ outb(tf->device, ioaddr->device_addr);
+ VPRINTK("device 0x%X\n", tf->device);
+ }
+
+ ata_wait_idle(ap);
+}
+
+/**
+ * ata_tf_load_mmio - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+ if (tf->ctl != ap->last_ctl) {
+ writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ }
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr);
+ writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr);
+ writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr);
+ writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr);
+ writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
+
+ if (is_addr) {
+ writeb(tf->feature, (void __iomem *) ioaddr->feature_addr);
+ writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
+ writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
+ writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
+ writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ writeb(tf->device, (void __iomem *) ioaddr->device_addr);
+ VPRINTK("device 0x%X\n", tf->device);
+ }
+
+ ata_wait_idle(ap);
+}
+
+
+/**
+ * ata_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO
+ * or PIO as indicated by the ATA_FLAG_MMIO flag.
+ * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ * hob_lbal, hob_lbam, and hob_lbah.
+ *
+ * This function waits for idle (!BUSY and !DRQ) after writing
+ * registers. If the control register has a new value, this
+ * function also waits for idle after writing control and before
+ * writing the remaining registers.
+ *
+ * May be used as the tf_load() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_tf_load_mmio(ap, tf);
+ else
+ ata_tf_load_pio(ap, tf);
+}
+
+/**
+ * ata_exec_command_pio - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues PIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
+
+ outb(tf->command, ap->ioaddr.command_addr);
+ ata_pause(ap);
+}
+
+
+/**
+ * ata_exec_command_mmio - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues MMIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * FIXME: missing write posting for 400nS delay enforcement
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command);
+
+ writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr);
+ ata_pause(ap);
+}
+
+
+/**
+ * ata_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues PIO/MMIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_exec_command_mmio(ap, tf);
+ else
+ ata_exec_command_pio(ap, tf);
+}
+
+/**
+ * ata_tf_read_pio - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ tf->command = ata_check_status(ap);
+ tf->feature = inb(ioaddr->error_addr);
+ tf->nsect = inb(ioaddr->nsect_addr);
+ tf->lbal = inb(ioaddr->lbal_addr);
+ tf->lbam = inb(ioaddr->lbam_addr);
+ tf->lbah = inb(ioaddr->lbah_addr);
+ tf->device = inb(ioaddr->device_addr);
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+ tf->hob_feature = inb(ioaddr->error_addr);
+ tf->hob_nsect = inb(ioaddr->nsect_addr);
+ tf->hob_lbal = inb(ioaddr->lbal_addr);
+ tf->hob_lbam = inb(ioaddr->lbam_addr);
+ tf->hob_lbah = inb(ioaddr->lbah_addr);
+ }
+}
+
+/**
+ * ata_tf_read_mmio - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf via MMIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ tf->command = ata_check_status(ap);
+ tf->feature = readb((void __iomem *)ioaddr->error_addr);
+ tf->nsect = readb((void __iomem *)ioaddr->nsect_addr);
+ tf->lbal = readb((void __iomem *)ioaddr->lbal_addr);
+ tf->lbam = readb((void __iomem *)ioaddr->lbam_addr);
+ tf->lbah = readb((void __iomem *)ioaddr->lbah_addr);
+ tf->device = readb((void __iomem *)ioaddr->device_addr);
+
+ if (tf->flags & ATA_TFLAG_LBA48) {
+ writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr);
+ tf->hob_feature = readb((void __iomem *)ioaddr->error_addr);
+ tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr);
+ tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr);
+ tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr);
+ tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr);
+ }
+}
+
+
+/**
+ * ata_tf_read - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf.
+ *
+ * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
+ * is set, also reads the hob registers.
+ *
+ * May be used as the tf_read() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ ata_tf_read_mmio(ap, tf);
+ else
+ ata_tf_read_pio(ap, tf);
+}
+
+/**
+ * ata_check_status_pio - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_check_status_pio(struct ata_port *ap)
+{
+ return inb(ap->ioaddr.status_addr);
+}
+
+/**
+ * ata_check_status_mmio - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * via MMIO and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_check_status_mmio(struct ata_port *ap)
+{
+ return readb((void __iomem *) ap->ioaddr.status_addr);
+}
+
+
+/**
+ * ata_check_status - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * May be used as the check_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+u8 ata_check_status(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_MMIO)
+ return ata_check_status_mmio(ap);
+ return ata_check_status_pio(ap);
+}
+
+
+/**
+ * ata_altstatus - Read device alternate status reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile alternate status register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_altstatus() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+u8 ata_altstatus(struct ata_port *ap)
+{
+ if (ap->ops->check_altstatus)
+ return ap->ops->check_altstatus(ap);
+
+ if (ap->flags & ATA_FLAG_MMIO)
+ return readb((void __iomem *)ap->ioaddr.altstatus_addr);
+ return inb(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+
+ /* load PRD table addr. */
+ mb(); /* make sure PRD table writes are visible to controller */
+ writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = readb(mmio + ATA_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ writeb(dmactl, mmio + ATA_DMA_CMD);
+
+ /* issue r/w command */
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+ u8 dmactl;
+
+ /* start host DMA transaction */
+ dmactl = readb(mmio + ATA_DMA_CMD);
+ writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
+
+ /* Strictly, one may wish to issue a readb() here, to
+ * flush the mmio write. However, control also passes
+ * to the hardware at this point, and it will interrupt
+ * us when we are to resume control. So, in effect,
+ * we don't care when the mmio write flushes.
+ * Further, a read of the DMA status register _immediately_
+ * following the write may not be what certain flaky hardware
+ * is expected, so I think it is best to not add a readb()
+ * without first all the MMIO ATA cards/mobos.
+ * Or maybe I'm just being paranoid.
+ */
+}
+
+/**
+ * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO)
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+ u8 dmactl;
+
+ /* load PRD table addr. */
+ outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS);
+
+ /* specify data direction, triple-check start bit is clear */
+ dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ dmactl &= ~(ATA_DMA_WR | ATA_DMA_START);
+ if (!rw)
+ dmactl |= ATA_DMA_WR;
+ outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+
+ /* issue r/w command */
+ ap->ops->exec_command(ap, &qc->tf);
+}
+
+/**
+ * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO)
+ * @qc: Info associated with this ATA transaction.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+static void ata_bmdma_start_pio (struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ u8 dmactl;
+
+ /* start host DMA transaction */
+ dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ outb(dmactl | ATA_DMA_START,
+ ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+}
+
+
+/**
+ * ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes the ATA_DMA_START flag to the DMA command register.
+ *
+ * May be used as the bmdma_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_start(struct ata_queued_cmd *qc)
+{
+ if (qc->ap->flags & ATA_FLAG_MMIO)
+ ata_bmdma_start_mmio(qc);
+ else
+ ata_bmdma_start_pio(qc);
+}
+
+
+/**
+ * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes address of PRD table to device's PRD Table Address
+ * register, sets the DMA control register, and calls
+ * ops->exec_command() to start the transfer.
+ *
+ * May be used as the bmdma_setup() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_setup(struct ata_queued_cmd *qc)
+{
+ if (qc->ap->flags & ATA_FLAG_MMIO)
+ ata_bmdma_setup_mmio(qc);
+ else
+ ata_bmdma_setup_pio(qc);
+}
+
+
+/**
+ * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+ if (!ap->ioaddr.bmdma_addr)
+ return;
+
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio =
+ ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS;
+ writeb(readb(mmio), mmio);
+ } else {
+ unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS;
+ outb(inb(addr), addr);
+ }
+}
+
+
+/**
+ * ata_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Read and return BMDMA status register.
+ *
+ * May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+u8 ata_bmdma_status(struct ata_port *ap)
+{
+ u8 host_stat;
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+ host_stat = readb(mmio + ATA_DMA_STATUS);
+ } else
+ host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+ return host_stat;
+}
+
+
+/**
+ * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @qc: Command we are ending DMA for
+ *
+ * Clears the ATA_DMA_START flag in the dma control register
+ *
+ * May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host lock)
+ */
+
+void ata_bmdma_stop(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ if (ap->flags & ATA_FLAG_MMIO) {
+ void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
+
+ /* clear start/stop bit */
+ writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START,
+ mmio + ATA_DMA_CMD);
+ } else {
+ /* clear start/stop bit */
+ outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START,
+ ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
+ }
+
+ /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+ ata_altstatus(ap); /* dummy read */
+}
+
+/**
+ * ata_bmdma_freeze - Freeze BMDMA controller port
+ * @ap: port to freeze
+ *
+ * Freeze BMDMA controller port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_bmdma_freeze(struct ata_port *ap)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ ap->ctl |= ATA_NIEN;
+ ap->last_ctl = ap->ctl;
+
+ if (ap->flags & ATA_FLAG_MMIO)
+ writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr);
+ else
+ outb(ap->ctl, ioaddr->ctl_addr);
+}
+
+/**
+ * ata_bmdma_thaw - Thaw BMDMA controller port
+ * @ap: port to thaw
+ *
+ * Thaw BMDMA controller port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_bmdma_thaw(struct ata_port *ap)
+{
+ /* clear & re-enable interrupts */
+ ata_chk_status(ap);
+ ap->ops->irq_clear(ap);
+ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
+ ata_irq_on(ap);
+}
+
+/**
+ * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller
+ * @ap: port to handle error for
+ * @prereset: prereset method (can be NULL)
+ * @softreset: softreset method (can be NULL)
+ * @hardreset: hardreset method (can be NULL)
+ * @postreset: postreset method (can be NULL)
+ *
+ * Handle error for ATA BMDMA controller. It can handle both
+ * PATA and SATA controllers. Many controllers should be able to
+ * use this EH as-is or with some added handling before and
+ * after.
+ *
+ * This function is intended to be used for constructing
+ * ->error_handler callback by low level drivers.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_drive_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
+ ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
+ ata_postreset_fn_t postreset)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int thaw = 0;
+
+ qc = __ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
+ qc = NULL;
+
+ /* reset PIO HSM and stop DMA engine */
+ spin_lock_irqsave(ap->lock, flags);
+
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
+ u8 host_stat;
+
+ host_stat = ata_bmdma_status(ap);
+
+ ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat);
+
+ /* BMDMA controllers indicate host bus error by
+ * setting DMA_ERR bit and timing out. As it wasn't
+ * really a timeout event, adjust error mask and
+ * cancel frozen state.
+ */
+ if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) {
+ qc->err_mask = AC_ERR_HOST_BUS;
+ thaw = 1;
+ }
+
+ ap->ops->bmdma_stop(qc);
+ }
+
+ ata_altstatus(ap);
+ ata_chk_status(ap);
+ ap->ops->irq_clear(ap);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (thaw)
+ ata_eh_thaw_port(ap);
+
+ /* PIO and DMA engines have been stopped, perform recovery */
+ ata_do_eh(ap, prereset, softreset, hardreset, postreset);
+}
+
+/**
+ * ata_bmdma_error_handler - Stock error handler for BMDMA controller
+ * @ap: port to handle error for
+ *
+ * Stock error handler for BMDMA controller.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_error_handler(struct ata_port *ap)
+{
+ ata_reset_fn_t hardreset;
+
+ hardreset = NULL;
+ if (sata_scr_valid(ap))
+ hardreset = sata_std_hardreset;
+
+ ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
+ ata_std_postreset);
+}
+
+/**
+ * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for
+ * BMDMA controller
+ * @qc: internal command to clean up
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ ata_bmdma_stop(qc);
+}
+
+#ifdef CONFIG_PCI
+/**
+ * ata_pci_init_native_mode - Initialize native-mode driver
+ * @pdev: pci device to be initialized
+ * @port: array[2] of pointers to port info structures.
+ * @ports: bitmap of ports present
+ *
+ * Utility function which allocates and initializes an
+ * ata_probe_ent structure for a standard dual-port
+ * PIO-based IDE controller. The returned ata_probe_ent
+ * structure can be passed to ata_device_add(). The returned
+ * ata_probe_ent structure should then be freed with kfree().
+ *
+ * The caller need only pass the address of the primary port, the
+ * secondary will be deduced automatically. If the device has non
+ * standard secondary port mappings this function can be called twice,
+ * once for each interface.
+ */
+
+struct ata_probe_ent *
+ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports)
+{
+ struct ata_probe_ent *probe_ent =
+ ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ int p = 0;
+ unsigned long bmdma;
+
+ if (!probe_ent)
+ return NULL;
+
+ probe_ent->irq = pdev->irq;
+ probe_ent->irq_flags = IRQF_SHARED;
+ probe_ent->private_data = port[0]->private_data;
+
+ if (ports & ATA_PORT_PRIMARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
+ bmdma = pci_resource_start(pdev, 4);
+ if (bmdma) {
+ if (inb(bmdma + 2) & 0x80)
+ probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
+ probe_ent->port[p].bmdma_addr = bmdma;
+ }
+ ata_std_ports(&probe_ent->port[p]);
+ p++;
+ }
+
+ if (ports & ATA_PORT_SECONDARY) {
+ probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2);
+ probe_ent->port[p].altstatus_addr =
+ probe_ent->port[p].ctl_addr =
+ pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS;
+ bmdma = pci_resource_start(pdev, 4);
+ if (bmdma) {
+ bmdma += 8;
+ if(inb(bmdma + 2) & 0x80)
+ probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
+ probe_ent->port[p].bmdma_addr = bmdma;
+ }
+ ata_std_ports(&probe_ent->port[p]);
+ probe_ent->pinfo2 = port[1];
+ p++;
+ }
+
+ probe_ent->n_ports = p;
+ return probe_ent;
+}
+
+
+static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev,
+ struct ata_port_info **port, int port_mask)
+{
+ struct ata_probe_ent *probe_ent;
+ unsigned long bmdma = pci_resource_start(pdev, 4);
+
+ probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]);
+ if (!probe_ent)
+ return NULL;
+
+ probe_ent->n_ports = 2;
+ probe_ent->private_data = port[0]->private_data;
+
+ if (port_mask & ATA_PORT_PRIMARY) {
+ probe_ent->irq = 14;
+ probe_ent->port[0].cmd_addr = ATA_PRIMARY_CMD;
+ probe_ent->port[0].altstatus_addr =
+ probe_ent->port[0].ctl_addr = ATA_PRIMARY_CTL;
+ if (bmdma) {
+ probe_ent->port[0].bmdma_addr = bmdma;
+ if (inb(bmdma + 2) & 0x80)
+ probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
+ }
+ ata_std_ports(&probe_ent->port[0]);
+ } else
+ probe_ent->dummy_port_mask |= ATA_PORT_PRIMARY;
+
+ if (port_mask & ATA_PORT_SECONDARY) {
+ if (probe_ent->irq)
+ probe_ent->irq2 = 15;
+ else
+ probe_ent->irq = 15;
+ probe_ent->port[1].cmd_addr = ATA_SECONDARY_CMD;
+ probe_ent->port[1].altstatus_addr =
+ probe_ent->port[1].ctl_addr = ATA_SECONDARY_CTL;
+ if (bmdma) {
+ probe_ent->port[1].bmdma_addr = bmdma + 8;
+ if (inb(bmdma + 10) & 0x80)
+ probe_ent->_host_flags |= ATA_HOST_SIMPLEX;
+ }
+ ata_std_ports(&probe_ent->port[1]);
+ probe_ent->pinfo2 = port[1];
+ } else
+ probe_ent->dummy_port_mask |= ATA_PORT_SECONDARY;
+
+ return probe_ent;
+}
+
+
+/**
+ * ata_pci_init_one - Initialize/register PCI IDE host controller
+ * @pdev: Controller to be initialized
+ * @port_info: Information from low-level host driver
+ * @n_ports: Number of ports attached to host controller
+ *
+ * This is a helper function which can be called from a driver's
+ * xxx_init_one() probe function if the hardware uses traditional
+ * IDE taskfile registers.
+ *
+ * This function calls pci_enable_device(), reserves its register
+ * regions, sets the dma mask, enables bus master mode, and calls
+ * ata_device_add()
+ *
+ * ASSUMPTION:
+ * Nobody makes a single channel controller that appears solely as
+ * the secondary legacy port on PCI.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, negative on errno-based value on error.
+ */
+
+int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info,
+ unsigned int n_ports)
+{
+ struct ata_probe_ent *probe_ent = NULL;
+ struct ata_port_info *port[2];
+ u8 tmp8, mask;
+ unsigned int legacy_mode = 0;
+ int disable_dev_on_err = 1;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ port[0] = port_info[0];
+ if (n_ports > 1)
+ port[1] = port_info[1];
+ else
+ port[1] = port[0];
+
+ if ((port[0]->flags & ATA_FLAG_NO_LEGACY) == 0
+ && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
+ /* TODO: What if one channel is in native mode ... */
+ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8);
+ mask = (1 << 2) | (1 << 0);
+ if ((tmp8 & mask) != mask)
+ legacy_mode = (1 << 3);
+ }
+
+ /* FIXME... */
+ if ((!legacy_mode) && (n_ports > 2)) {
+ printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n");
+ n_ports = 2;
+ /* For now */
+ }
+
+ /* FIXME: Really for ATA it isn't safe because the device may be
+ multi-purpose and we want to leave it alone if it was already
+ enabled. Secondly for shared use as Arjan says we want refcounting
+
+ Checking dev->is_enabled is insufficient as this is not set at
+ boot for the primary video which is BIOS enabled
+ */
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc) {
+ disable_dev_on_err = 0;
+ goto err_out;
+ }
+
+ if (legacy_mode) {
+ if (!request_region(ATA_PRIMARY_CMD, 8, "libata")) {
+ struct resource *conflict, res;
+ res.start = ATA_PRIMARY_CMD;
+ res.end = ATA_PRIMARY_CMD + 8 - 1;
+ conflict = ____request_resource(&ioport_resource, &res);
+ while (conflict->child)
+ conflict = ____request_resource(conflict, &res);
+ if (!strcmp(conflict->name, "libata"))
+ legacy_mode |= ATA_PORT_PRIMARY;
+ else {
+ disable_dev_on_err = 0;
+ printk(KERN_WARNING "ata: 0x%0X IDE port busy\n" \
+ "ata: conflict with %s\n",
+ ATA_PRIMARY_CMD,
+ conflict->name);
+ }
+ } else
+ legacy_mode |= ATA_PORT_PRIMARY;
+
+ if (!request_region(ATA_SECONDARY_CMD, 8, "libata")) {
+ struct resource *conflict, res;
+ res.start = ATA_SECONDARY_CMD;
+ res.end = ATA_SECONDARY_CMD + 8 - 1;
+ conflict = ____request_resource(&ioport_resource, &res);
+ while (conflict->child)
+ conflict = ____request_resource(conflict, &res);
+ if (!strcmp(conflict->name, "libata"))
+ legacy_mode |= ATA_PORT_SECONDARY;
+ else {
+ disable_dev_on_err = 0;
+ printk(KERN_WARNING "ata: 0x%X IDE port busy\n" \
+ "ata: conflict with %s\n",
+ ATA_SECONDARY_CMD,
+ conflict->name);
+ }
+ } else
+ legacy_mode |= ATA_PORT_SECONDARY;
+ }
+
+ /* we have legacy mode, but all ports are unavailable */
+ if (legacy_mode == (1 << 3)) {
+ rc = -EBUSY;
+ goto err_out_regions;
+ }
+
+ /* FIXME: If we get no DMA mask we should fall back to PIO */
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+
+ if (legacy_mode) {
+ probe_ent = ata_pci_init_legacy_port(pdev, port, legacy_mode);
+ } else {
+ if (n_ports == 2)
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
+ else
+ probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY);
+ }
+ if (!probe_ent) {
+ rc = -ENOMEM;
+ goto err_out_regions;
+ }
+
+ pci_set_master(pdev);
+
+ /* FIXME: check ata_device_add return */
+ ata_device_add(probe_ent);
+
+ kfree(probe_ent);
+
+ return 0;
+
+err_out_regions:
+ if (legacy_mode & ATA_PORT_PRIMARY)
+ release_region(ATA_PRIMARY_CMD, 8);
+ if (legacy_mode & ATA_PORT_SECONDARY)
+ release_region(ATA_SECONDARY_CMD, 8);
+ pci_release_regions(pdev);
+err_out:
+ if (disable_dev_on_err)
+ pci_disable_device(pdev);
+ return rc;
+}
+
+/**
+ * ata_pci_clear_simplex - attempt to kick device out of simplex
+ * @pdev: PCI device
+ *
+ * Some PCI ATA devices report simplex mode but in fact can be told to
+ * enter non simplex mode. This implements the neccessary logic to
+ * perform the task on such devices. Calling it on other devices will
+ * have -undefined- behaviour.
+ */
+
+int ata_pci_clear_simplex(struct pci_dev *pdev)
+{
+ unsigned long bmdma = pci_resource_start(pdev, 4);
+ u8 simplex;
+
+ if (bmdma == 0)
+ return -ENOENT;
+
+ simplex = inb(bmdma + 0x02);
+ outb(simplex & 0x60, bmdma + 0x02);
+ simplex = inb(bmdma + 0x02);
+ if (simplex & 0x80)
+ return -EOPNOTSUPP;
+ return 0;
+}
+
+unsigned long ata_pci_default_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long xfer_mask)
+{
+ /* Filter out DMA modes if the device has been configured by
+ the BIOS as PIO only */
+
+ if (ap->ioaddr.bmdma_addr == 0)
+ xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ return xfer_mask;
+}
+
+#endif /* CONFIG_PCI */
+