diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 25 |
1 files changed, 20 insertions, 5 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 564c03c4ebb3..3c5965d56c47 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2777,7 +2777,7 @@ int ata_bus_probe(struct ata_port *ap) /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(&ap->link); + sata_down_spd_limit(&ap->link, 0); ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } @@ -2873,21 +2873,27 @@ void ata_port_disable(struct ata_port *ap) /** * sata_down_spd_limit - adjust SATA spd limit downward * @link: Link to adjust SATA spd limit for + * @spd_limit: Additional limit * * Adjust SATA spd limit of @link downward. Note that this * function only adjusts the limit. The change must be applied * using sata_set_spd(). * + * If @spd_limit is non-zero, the speed is limited to equal to or + * lower than @spd_limit if such speed is supported. If + * @spd_limit is slower than any supported speed, only the lowest + * supported speed is allowed. + * * LOCKING: * Inherited from caller. * * RETURNS: * 0 on success, negative errno on failure */ -int sata_down_spd_limit(struct ata_link *link) +int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) { u32 sstatus, spd, mask; - int rc, highbit; + int rc, bit; if (!sata_scr_valid(link)) return -EOPNOTSUPP; @@ -2906,8 +2912,8 @@ int sata_down_spd_limit(struct ata_link *link) return -EINVAL; /* unconditionally mask off the highest bit */ - highbit = fls(mask) - 1; - mask &= ~(1 << highbit); + bit = fls(mask) - 1; + mask &= ~(1 << bit); /* Mask off all speeds higher than or equal to the current * one. Force 1.5Gbps if current SPD is not available. @@ -2921,6 +2927,15 @@ int sata_down_spd_limit(struct ata_link *link) if (!mask) return -EINVAL; + if (spd_limit) { + if (mask & ((1 << spd_limit) - 1)) + mask &= (1 << spd_limit) - 1; + else { + bit = ffs(mask) - 1; + mask = 1 << bit; + } + } + link->sata_spd_limit = mask; ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n", |