diff options
Diffstat (limited to 'drivers/acpi')
73 files changed, 2177 insertions, 2345 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index b811f2173f6f..0f9de2b44c0c 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -66,7 +66,6 @@ config ACPI_PROCFS config ACPI_PROCFS_POWER bool "Deprecated power /proc/acpi directories" depends on PROC_FS - default y help For backwards compatibility, this option allows deprecated power /proc/acpi/ directories to exist, even when @@ -90,13 +89,6 @@ config ACPI_POWER_METER To compile this driver as a module, choose M here: the module will be called power-meter. -config ACPI_SYSFS_POWER - bool "Future power /sys interface" - select POWER_SUPPLY - default y - help - Say N to disable power /sys interface - config ACPI_EC_DEBUGFS tristate "EC read/write access through /sys/kernel/debug/ec" default n @@ -105,7 +97,7 @@ config ACPI_EC_DEBUGFS Be aware that using this interface can confuse your Embedded Controller in a way that a normal reboot is not enough. You then - have to power of your system, and remove the laptop battery for + have to power off your system, and remove the laptop battery for some seconds. An Embedded Controller typically is available on laptops and reads sensor values like battery state and temperature. @@ -136,6 +128,7 @@ config ACPI_PROC_EVENT config ACPI_AC tristate "AC Adapter" depends on X86 + select POWER_SUPPLY default y help This driver supports the AC Adapter object, which indicates @@ -148,6 +141,7 @@ config ACPI_AC config ACPI_BATTERY tristate "Battery" depends on X86 + select POWER_SUPPLY default y help This driver adds support for battery information through @@ -364,6 +358,7 @@ config ACPI_HOTPLUG_MEMORY config ACPI_SBS tristate "Smart Battery System" depends on X86 + select POWER_SUPPLY help This driver supports the Smart Battery System, another type of access to battery information, found on some laptops. diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 56205a0b85df..ba9afeaa23ac 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -32,9 +32,7 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #endif -#ifdef CONFIG_ACPI_SYSFS_POWER #include <linux/power_supply.h> -#endif #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> @@ -86,9 +84,7 @@ static struct acpi_driver acpi_ac_driver = { }; struct acpi_ac { -#ifdef CONFIG_ACPI_SYSFS_POWER struct power_supply charger; -#endif struct acpi_device * device; unsigned long long state; }; @@ -104,7 +100,6 @@ static const struct file_operations acpi_ac_fops = { .release = single_release, }; #endif -#ifdef CONFIG_ACPI_SYSFS_POWER static int get_ac_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -123,7 +118,6 @@ static int get_ac_property(struct power_supply *psy, static enum power_supply_property ac_props[] = { POWER_SUPPLY_PROP_ONLINE, }; -#endif /* -------------------------------------------------------------------------- AC Adapter Management -------------------------------------------------------------------------- */ @@ -247,9 +241,7 @@ static void acpi_ac_notify(struct acpi_device *device, u32 event) dev_name(&device->dev), event, (u32) ac->state); acpi_notifier_call_chain(device, event, (u32) ac->state); -#ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); -#endif } return; @@ -282,14 +274,12 @@ static int acpi_ac_add(struct acpi_device *device) #endif if (result) goto end; -#ifdef CONFIG_ACPI_SYSFS_POWER ac->charger.name = acpi_device_bid(device); ac->charger.type = POWER_SUPPLY_TYPE_MAINS; ac->charger.properties = ac_props; ac->charger.num_properties = ARRAY_SIZE(ac_props); ac->charger.get_property = get_ac_property; power_supply_register(&ac->device->dev, &ac->charger); -#endif printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device), acpi_device_bid(device), @@ -316,10 +306,8 @@ static int acpi_ac_resume(struct acpi_device *device) old_state = ac->state; if (acpi_ac_get_state(ac)) return 0; -#ifdef CONFIG_ACPI_SYSFS_POWER if (old_state != ac->state) kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); -#endif return 0; } @@ -333,10 +321,8 @@ static int acpi_ac_remove(struct acpi_device *device, int type) ac = acpi_driver_data(device); -#ifdef CONFIG_ACPI_SYSFS_POWER if (ac->charger.dev) power_supply_unregister(&ac->charger); -#endif #ifdef CONFIG_ACPI_PROCFS_POWER acpi_ac_remove_fs(device); #endif diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index b76848c80be3..6b115f6c4313 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -382,31 +382,32 @@ static void acpi_pad_remove_sysfs(struct acpi_device *device) device_remove_file(&device->dev, &dev_attr_rrtime); } -/* Query firmware how many CPUs should be idle */ -static int acpi_pad_pur(acpi_handle handle, int *num_cpus) +/* + * Query firmware how many CPUs should be idle + * return -1 on failure + */ +static int acpi_pad_pur(acpi_handle handle) { struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; union acpi_object *package; - int rev, num, ret = -EINVAL; + int num = -1; if (ACPI_FAILURE(acpi_evaluate_object(handle, "_PUR", NULL, &buffer))) - return -EINVAL; + return num; if (!buffer.length || !buffer.pointer) - return -EINVAL; + return num; package = buffer.pointer; - if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2) - goto out; - rev = package->package.elements[0].integer.value; - num = package->package.elements[1].integer.value; - if (rev != 1 || num < 0) - goto out; - *num_cpus = num; - ret = 0; -out: + + if (package->type == ACPI_TYPE_PACKAGE && + package->package.count == 2 && + package->package.elements[0].integer.value == 1) /* rev 1 */ + + num = package->package.elements[1].integer.value; + kfree(buffer.pointer); - return ret; + return num; } /* Notify firmware how many CPUs are idle */ @@ -433,7 +434,8 @@ static void acpi_pad_handle_notify(acpi_handle handle) uint32_t idle_cpus; mutex_lock(&isolated_cpus_lock); - if (acpi_pad_pur(handle, &num_cpus)) { + num_cpus = acpi_pad_pur(handle); + if (num_cpus < 0) { mutex_unlock(&isolated_cpus_lock); return; } diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index d93cc06f4bf8..a7e1d1aa4107 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -21,7 +21,7 @@ acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \ exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o exdebug.o -acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o +acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o hwpci.o acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o @@ -44,4 +44,5 @@ acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \ utcopy.o utdelete.o utglobal.o utmath.o utobject.o \ - utstate.o utmutex.o utobject.o utresrc.o utlock.o utids.o + utstate.o utmutex.o utobject.o utresrc.o utlock.o utids.o \ + utosi.o utxferror.o diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h index 48faf3eba9fb..72e9d5eb083c 100644 --- a/drivers/acpi/acpica/acdebug.h +++ b/drivers/acpi/acpica/acdebug.h @@ -105,6 +105,8 @@ void acpi_db_set_method_data(char *type_arg, char *index_arg, char *value_arg); acpi_status acpi_db_display_objects(char *obj_type_arg, char *display_count_arg); +void acpi_db_display_interfaces(char *action_arg, char *interface_name_arg); + acpi_status acpi_db_find_name_in_namespace(char *name_arg); void acpi_db_set_scope(char *name); diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 36867cd70eac..a6f99cc37a19 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -105,8 +105,9 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, struct acpi_gpe_block_info **return_gpe_block); acpi_status -acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, - struct acpi_gpe_block_info *gpe_block); +acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, + struct acpi_gpe_block_info *gpe_block, + void *ignored); acpi_status acpi_ev_delete_gpe_block(struct acpi_gpe_block_info *gpe_block); diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 1d192142c691..ad88fcae4eb9 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -132,6 +132,7 @@ struct acpi_table_fadt acpi_gbl_FADT; u32 acpi_current_gpe_count; u32 acpi_gbl_trace_flags; acpi_name acpi_gbl_trace_method_name; +u8 acpi_gbl_system_awake_and_running; #endif @@ -187,6 +188,10 @@ ACPI_EXTERN u8 acpi_gbl_integer_bit_width; ACPI_EXTERN u8 acpi_gbl_integer_byte_width; ACPI_EXTERN u8 acpi_gbl_integer_nybble_width; +/* Mutex for _OSI support */ + +ACPI_EXTERN acpi_mutex acpi_gbl_osi_mutex; + /* Reader/Writer lock is used for namespace walk and dynamic table unload */ ACPI_EXTERN struct acpi_rw_lock acpi_gbl_namespace_rw_lock; @@ -255,6 +260,7 @@ ACPI_EXTERN acpi_init_handler acpi_gbl_init_handler; ACPI_EXTERN acpi_tbl_handler acpi_gbl_table_handler; ACPI_EXTERN void *acpi_gbl_table_handler_context; ACPI_EXTERN struct acpi_walk_state *acpi_gbl_breakpoint_walk; +ACPI_EXTERN acpi_interface_handler acpi_gbl_interface_handler; /* Owner ID support */ @@ -273,8 +279,8 @@ ACPI_EXTERN u8 acpi_gbl_debugger_configuration; ACPI_EXTERN u8 acpi_gbl_step_to_next_call; ACPI_EXTERN u8 acpi_gbl_acpi_hardware_present; ACPI_EXTERN u8 acpi_gbl_events_initialized; -ACPI_EXTERN u8 acpi_gbl_system_awake_and_running; ACPI_EXTERN u8 acpi_gbl_osi_data; +ACPI_EXTERN struct acpi_interface_info *acpi_gbl_supported_interfaces; #ifndef DEFINE_ACPI_GLOBALS @@ -364,6 +370,7 @@ ACPI_EXTERN struct acpi_fixed_event_handler ACPI_EXTERN struct acpi_gpe_xrupt_info *acpi_gbl_gpe_xrupt_list_head; ACPI_EXTERN struct acpi_gpe_block_info *acpi_gbl_gpe_fadt_blocks[ACPI_MAX_GPE_BLOCKS]; +ACPI_EXTERN u8 acpi_all_gpes_initialized; /***************************************************************************** * diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 120b3af56596..167470ad2d21 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -121,6 +121,13 @@ acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, struct acpi_gpe_block_info *gpe_block, void *context); +/* + * hwpci - PCI configuration support + */ +acpi_status +acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id, + acpi_handle root_pci_device, acpi_handle pci_region); + #ifdef ACPI_FUTURE_USAGE /* * hwtimer - ACPI Timer prototypes diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index df85b53a674f..2ceb0c05b2d7 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -413,6 +413,7 @@ struct acpi_handler_info { void *context; /* Context to be passed to handler */ struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */ u8 orig_flags; /* Original misc info about this GPE */ + u8 orig_enabled; /* Set if the GPE was originally enabled */ }; union acpi_gpe_dispatch_info { @@ -457,6 +458,7 @@ struct acpi_gpe_block_info { u32 register_count; /* Number of register pairs in block */ u16 gpe_count; /* Number of individual GPEs in block */ u8 block_base_number; /* Base GPE number for this block */ + u8 initialized; /* If set, the GPE block has been initialized */ }; /* Information about GPE interrupt handlers, one per each interrupt level used for GPEs */ @@ -473,7 +475,6 @@ struct acpi_gpe_walk_info { struct acpi_gpe_block_info *gpe_block; u16 count; acpi_owner_id owner_id; - u8 enable_this_gpe; u8 execute_by_owner_id; }; @@ -854,6 +855,7 @@ struct acpi_bit_register_info { ACPI_BITMASK_POWER_BUTTON_STATUS | \ ACPI_BITMASK_SLEEP_BUTTON_STATUS | \ ACPI_BITMASK_RT_CLOCK_STATUS | \ + ACPI_BITMASK_PCIEXP_WAKE_STATUS | \ ACPI_BITMASK_WAKE_STATUS) #define ACPI_BITMASK_TIMER_ENABLE 0x0001 @@ -908,15 +910,21 @@ struct acpi_bit_register_info { #define ACPI_OSI_WIN_VISTA 0x07 #define ACPI_OSI_WINSRV_2008 0x08 #define ACPI_OSI_WIN_VISTA_SP1 0x09 -#define ACPI_OSI_WIN_7 0x0A +#define ACPI_OSI_WIN_VISTA_SP2 0x0A +#define ACPI_OSI_WIN_7 0x0B #define ACPI_ALWAYS_ILLEGAL 0x00 struct acpi_interface_info { char *name; + struct acpi_interface_info *next; + u8 flags; u8 value; }; +#define ACPI_OSI_INVALID 0x01 +#define ACPI_OSI_DYNAMIC 0x02 + struct acpi_port_info { char *name; u16 start; @@ -996,7 +1004,7 @@ struct acpi_port_info { struct acpi_db_method_info { acpi_handle main_thread_gate; acpi_handle thread_complete_gate; - u32 *threads; + acpi_thread_id *threads; u32 num_threads; u32 num_created; u32 num_completed; diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h index 9894929a2abb..8d5c9e0a495f 100644 --- a/drivers/acpi/acpica/acmacros.h +++ b/drivers/acpi/acpica/acmacros.h @@ -338,8 +338,8 @@ * the plist contains a set of parens to allow variable-length lists. * These macros are used for both the debug and non-debug versions of the code. */ -#define ACPI_ERROR_NAMESPACE(s, e) acpi_ns_report_error (AE_INFO, s, e); -#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ns_report_method_error (AE_INFO, s, n, p, e); +#define ACPI_ERROR_NAMESPACE(s, e) acpi_ut_namespace_error (AE_INFO, s, e); +#define ACPI_ERROR_METHOD(s, n, p, e) acpi_ut_method_error (AE_INFO, s, n, p, e); #define ACPI_WARN_PREDEFINED(plist) acpi_ut_predefined_warning plist #define ACPI_INFO_PREDEFINED(plist) acpi_ut_predefined_info plist diff --git a/drivers/acpi/acpica/acnamesp.h b/drivers/acpi/acpica/acnamesp.h index 9f60ff002203..d44d3bc5b847 100644 --- a/drivers/acpi/acpica/acnamesp.h +++ b/drivers/acpi/acpica/acnamesp.h @@ -339,18 +339,6 @@ acpi_object_type acpi_ns_get_type(struct acpi_namespace_node *node); u32 acpi_ns_local(acpi_object_type type); void -acpi_ns_report_error(const char *module_name, - u32 line_number, - const char *internal_name, acpi_status lookup_status); - -void -acpi_ns_report_method_error(const char *module_name, - u32 line_number, - const char *message, - struct acpi_namespace_node *node, - const char *path, acpi_status lookup_status); - -void acpi_ns_print_node_pathname(struct acpi_namespace_node *node, const char *msg); acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info); diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h index 54857fa87aaf..bdbfaf22bd14 100644 --- a/drivers/acpi/acpica/acobject.h +++ b/drivers/acpi/acpica/acobject.h @@ -248,7 +248,7 @@ ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_NOTIFY_INFO}; u32 base_byte_offset; /* Byte offset within containing object */\ u32 value; /* Value to store into the Bank or Index register */\ u8 start_field_bit_offset;/* Bit offset within first field datum (0-63) */\ - u8 access_bit_width; /* Read/Write size in bits (8-64) */ + struct acpi_object_field_common { /* COMMON FIELD (for BUFFER, REGION, BANK, and INDEX fields) */ ACPI_OBJECT_COMMON_HEADER ACPI_COMMON_FIELD_INFO union acpi_operand_object *region_obj; /* Parent Operation Region object (REGION/BANK fields only) */ diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 35df755251ce..72e4183c1937 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -312,8 +312,6 @@ void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list); /* * uteval - object evaluation */ -acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state); - acpi_status acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node, char *path, @@ -395,6 +393,21 @@ acpi_status acpi_ut_get_object_size(union acpi_operand_object *obj, acpi_size * obj_length); /* + * utosi - Support for the _OSI predefined control method + */ +acpi_status acpi_ut_initialize_interfaces(void); + +void acpi_ut_interface_terminate(void); + +acpi_status acpi_ut_install_interface(acpi_string interface_name); + +acpi_status acpi_ut_remove_interface(acpi_string interface_name); + +struct acpi_interface_info *acpi_ut_get_interface(acpi_string interface_name); + +acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state); + +/* * utstate - Generic state creation/cache routines */ void @@ -473,17 +486,6 @@ u8 acpi_ut_valid_acpi_char(char character, u32 position); acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer); -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_warning(const char *module_name, - u32 line_number, - char *pathname, - u8 node_flags, const char *format, ...); - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_info(const char *module_name, - u32 line_number, - char *pathname, u8 node_flags, const char *format, ...); - /* Values for Base above (16=Hex, 10=Decimal) */ #define ACPI_ANY_BASE 0 @@ -574,6 +576,32 @@ acpi_status acpi_ut_create_list(char *list_name, u16 object_size, struct acpi_memory_list **return_cache); -#endif +#endif /* ACPI_DBG_TRACK_ALLOCATIONS */ + +/* + * utxferror - various error/warning output functions + */ +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_warning(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...); + +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_info(const char *module_name, + u32 line_number, + char *pathname, u8 node_flags, const char *format, ...); + +void +acpi_ut_namespace_error(const char *module_name, + u32 line_number, + const char *internal_name, acpi_status lookup_status); + +void +acpi_ut_method_error(const char *module_name, + u32 line_number, + const char *message, + struct acpi_namespace_node *node, + const char *path, acpi_status lookup_status); #endif /* _ACUTILS_H */ diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c index 64750ee96e20..d94dd8974b55 100644 --- a/drivers/acpi/acpica/dsmethod.c +++ b/drivers/acpi/acpica/dsmethod.c @@ -573,7 +573,7 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc, acpi_os_release_mutex(method_desc->method. mutex->mutex.os_mutex); - method_desc->method.mutex->mutex.thread_id = NULL; + method_desc->method.mutex->mutex.thread_id = 0; } } diff --git a/drivers/acpi/acpica/dswexec.c b/drivers/acpi/acpica/dswexec.c index d555b374e314..6b0b5d08d97a 100644 --- a/drivers/acpi/acpica/dswexec.c +++ b/drivers/acpi/acpica/dswexec.c @@ -300,10 +300,25 @@ acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state, * we must enter this object into the namespace. The created * object is temporary and will be deleted upon completion of * the execution of this method. + * + * Note 10/2010: Except for the Scope() op. This opcode does + * not actually create a new object, it refers to an existing + * object. However, for Scope(), we want to indeed open a + * new scope. */ - status = acpi_ds_load2_begin_op(walk_state, NULL); + if (op->common.aml_opcode != AML_SCOPE_OP) { + status = + acpi_ds_load2_begin_op(walk_state, NULL); + } else { + status = + acpi_ds_scope_stack_push(op->named.node, + op->named.node-> + type, walk_state); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } } - break; case AML_CLASS_EXECUTE: diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c index 303618889da0..c61c3039c31a 100644 --- a/drivers/acpi/acpica/evevent.c +++ b/drivers/acpi/acpica/evevent.c @@ -95,47 +95,6 @@ acpi_status acpi_ev_initialize_events(void) /******************************************************************************* * - * FUNCTION: acpi_ev_install_fadt_gpes - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Completes initialization of the FADT-defined GPE blocks - * (0 and 1). The HW must be fully initialized at this point, - * including global lock support. - * - ******************************************************************************/ - -acpi_status acpi_ev_install_fadt_gpes(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_install_fadt_gpes); - - /* Namespace must be locked */ - - status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); - if (ACPI_FAILURE(status)) { - return (status); - } - - /* FADT GPE Block 0 */ - - (void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device, - acpi_gbl_gpe_fadt_blocks[0]); - - /* FADT GPE Block 1 */ - - (void)acpi_ev_initialize_gpe_block(acpi_gbl_fadt_gpe_device, - acpi_gbl_gpe_fadt_blocks[1]); - - (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); - return_ACPI_STATUS(AE_OK); -} - -/******************************************************************************* - * * FUNCTION: acpi_ev_install_xrupt_handlers * * PARAMETERS: None diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 85445fb5844e..020add3eee1c 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -363,6 +363,7 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, gpe_block->gpe_count = (u16)(register_count * ACPI_GPE_REGISTER_WIDTH); gpe_block->register_count = register_count; gpe_block->block_base_number = gpe_block_base_number; + gpe_block->initialized = FALSE; ACPI_MEMCPY(&gpe_block->block_address, gpe_block_address, sizeof(struct acpi_generic_address)); @@ -385,11 +386,12 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, return_ACPI_STATUS(status); } + acpi_all_gpes_initialized = FALSE; + /* Find all GPE methods (_Lxx or_Exx) for this block */ walk_info.gpe_block = gpe_block; walk_info.gpe_device = gpe_device; - walk_info.enable_this_gpe = FALSE; walk_info.execute_by_owner_id = FALSE; status = acpi_ns_walk_namespace(ACPI_TYPE_METHOD, gpe_device, @@ -434,35 +436,34 @@ acpi_ev_create_gpe_block(struct acpi_namespace_node *gpe_device, ******************************************************************************/ acpi_status -acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, - struct acpi_gpe_block_info *gpe_block) +acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, + struct acpi_gpe_block_info *gpe_block, + void *ignored) { acpi_status status; struct acpi_gpe_event_info *gpe_event_info; u32 gpe_enabled_count; u32 gpe_index; - u32 gpe_number; u32 i; u32 j; ACPI_FUNCTION_TRACE(ev_initialize_gpe_block); - /* Ignore a null GPE block (e.g., if no GPE block 1 exists) */ - - if (!gpe_block) { + /* + * Ignore a null GPE block (e.g., if no GPE block 1 exists) and + * GPE blocks that have been initialized already. + */ + if (!gpe_block || gpe_block->initialized) { return_ACPI_STATUS(AE_OK); } /* - * Enable all GPEs that have a corresponding method. Any other GPEs - * within this block must be enabled via the acpi_enable_gpe interface. + * Enable all GPEs that have a corresponding method and have the + * ACPI_GPE_CAN_WAKE flag unset. Any other GPEs within this block must + * be enabled via the acpi_enable_gpe() interface. */ gpe_enabled_count = 0; - if (gpe_device == acpi_gbl_fadt_gpe_device) { - gpe_device = NULL; - } - for (i = 0; i < gpe_block->register_count; i++) { for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { @@ -470,27 +471,19 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j; gpe_event_info = &gpe_block->event_info[gpe_index]; - gpe_number = gpe_index + gpe_block->block_base_number; /* Ignore GPEs that have no corresponding _Lxx/_Exx method */ - if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)) { + if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD) + || (gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) { continue; } - /* - * If the GPE has already been enabled for runtime - * signaling, make sure it remains enabled, but do not - * increment its reference counter. - */ - status = gpe_event_info->runtime_count ? - acpi_ev_enable_gpe(gpe_event_info) : - acpi_enable_gpe(gpe_device, gpe_number); - + status = acpi_raw_enable_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, - "Could not enable GPE 0x%02X", - gpe_number)); + "Could not enable GPE 0x%02X", + gpe_index + gpe_block->block_base_number)); continue; } @@ -504,5 +497,7 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, gpe_enabled_count)); } + gpe_block->initialized = TRUE; + return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c index 3084c5de1bba..2c7def95f721 100644 --- a/drivers/acpi/acpica/evgpeinit.c +++ b/drivers/acpi/acpica/evgpeinit.c @@ -210,8 +210,7 @@ acpi_status acpi_ev_gpe_initialize(void) * * DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a * result of a Load() or load_table() operation. If new GPE - * methods have been installed, register the new methods and - * enable and runtime GPEs that are associated with them. + * methods have been installed, register the new methods. * ******************************************************************************/ @@ -239,7 +238,6 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id) walk_info.owner_id = table_owner_id; walk_info.execute_by_owner_id = TRUE; walk_info.count = 0; - walk_info.enable_this_gpe = TRUE; /* Walk the interrupt level descriptor list */ @@ -301,8 +299,6 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id) * * If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods * with that owner. - * If walk_info->enable_this_gpe is TRUE, the GPE that is referred to by a GPE - * method is immediately enabled (Used for Load/load_table operators) * ******************************************************************************/ @@ -315,8 +311,6 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, struct acpi_gpe_walk_info *walk_info = ACPI_CAST_PTR(struct acpi_gpe_walk_info, context); struct acpi_gpe_event_info *gpe_event_info; - struct acpi_namespace_node *gpe_device; - acpi_status status; u32 gpe_number; char name[ACPI_NAME_SIZE + 1]; u8 type; @@ -421,29 +415,6 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle, gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD); gpe_event_info->dispatch.method_node = method_node; - /* - * Enable this GPE if requested. This only happens when during the - * execution of a Load or load_table operator. We have found a new - * GPE method and want to immediately enable the GPE if it is a - * runtime GPE. - */ - if (walk_info->enable_this_gpe) { - - walk_info->count++; - gpe_device = walk_info->gpe_device; - - if (gpe_device == acpi_gbl_fadt_gpe_device) { - gpe_device = NULL; - } - - status = acpi_enable_gpe(gpe_device, gpe_number); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, - "Could not enable GPE 0x%02X", - gpe_number)); - } - } - ACPI_DEBUG_PRINT((ACPI_DB_LOAD, "Registered GPE method %s as GPE number 0x%.2X\n", name, gpe_number)); diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index df0aea9a8cfd..fcaed9fb44ff 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -553,7 +553,7 @@ acpi_status acpi_ev_release_global_lock(void) acpi_gbl_global_lock_acquired = FALSE; /* Release the local GL mutex */ - acpi_ev_global_lock_thread_id = NULL; + acpi_ev_global_lock_thread_id = 0; acpi_ev_global_lock_acquired = 0; acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex); return_ACPI_STATUS(status); diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c index f40d271bf568..0b47a6dc9290 100644 --- a/drivers/acpi/acpica/evrgnini.c +++ b/drivers/acpi/acpica/evrgnini.c @@ -289,8 +289,8 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, } /* - * Get the PCI device and function numbers from the _ADR object contained - * in the parent's scope. + * Get the PCI device and function numbers from the _ADR object + * contained in the parent's scope. */ status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, pci_device_node, &pci_value); @@ -320,9 +320,15 @@ acpi_ev_pci_config_region_setup(acpi_handle handle, pci_id->bus = ACPI_LOWORD(pci_value); } - /* Complete this device's pci_id */ + /* Complete/update the PCI ID for this device */ - acpi_os_derive_pci_id(pci_root_node, region_obj->region.node, &pci_id); + status = + acpi_hw_derive_pci_id(pci_id, pci_root_node, + region_obj->region.node); + if (ACPI_FAILURE(status)) { + ACPI_FREE(pci_id); + return_ACPI_STATUS(status); + } *region_context = pci_id; return_ACPI_STATUS(AE_OK); diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index 14e48add32fa..36af222cac65 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -726,15 +726,16 @@ acpi_install_gpe_handler(acpi_handle gpe_device, (ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK); /* - * If the GPE is associated with a method and it cannot wake up the - * system from sleep states, it was enabled automatically during - * initialization, so it has to be disabled now to avoid spurious - * execution of the handler. + * If the GPE is associated with a method, it might have been enabled + * automatically during initialization, in which case it has to be + * disabled now to avoid spurious execution of the handler. */ if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD) - && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) + && gpe_event_info->runtime_count) { + handler->orig_enabled = 1; (void)acpi_raw_disable_gpe(gpe_event_info); + } /* Install the handler */ @@ -837,13 +838,13 @@ acpi_remove_gpe_handler(acpi_handle gpe_device, gpe_event_info->flags |= handler->orig_flags; /* - * If the GPE was previously associated with a method and it cannot wake - * up the system from sleep states, it should be enabled at this point - * to restore the post-initialization configuration. + * If the GPE was previously associated with a method and it was + * enabled, it should be enabled at this point to restore the + * post-initialization configuration. */ if ((handler->orig_flags & ACPI_GPE_DISPATCH_METHOD) - && !(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) + && handler->orig_enabled) (void)acpi_raw_enable_gpe(gpe_event_info); /* Now we can free the handler object */ diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index 304825528d48..a1dabe3fd8ae 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -379,21 +379,12 @@ acpi_status acpi_gpe_can_wake(acpi_handle gpe_device, u32 gpe_number) /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); - if (!gpe_event_info) { + if (gpe_event_info) { + gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; + } else { status = AE_BAD_PARAMETER; - goto unlock_and_exit; - } - - if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) { - goto unlock_and_exit; } - gpe_event_info->flags |= ACPI_GPE_CAN_WAKE; - if (gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD) { - (void)acpi_raw_disable_gpe(gpe_event_info); - } - -unlock_and_exit: acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return_ACPI_STATUS(status); } @@ -651,7 +642,7 @@ acpi_install_gpe_block(acpi_handle gpe_device, struct acpi_generic_address *gpe_block_address, u32 register_count, u32 interrupt_number) { - acpi_status status; + acpi_status status = AE_OK; union acpi_operand_object *obj_desc; struct acpi_namespace_node *node; struct acpi_gpe_block_info *gpe_block; @@ -715,10 +706,6 @@ acpi_install_gpe_block(acpi_handle gpe_device, obj_desc->device.gpe_block = gpe_block; - /* Enable the runtime GPEs in the new block */ - - status = acpi_ev_initialize_gpe_block(node, gpe_block); - unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); return_ACPI_STATUS(status); @@ -924,3 +911,43 @@ acpi_status acpi_enable_all_runtime_gpes(void) return_ACPI_STATUS(status); } + +/****************************************************************************** + * + * FUNCTION: acpi_update_gpes + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Enable all GPEs that have associated _Lxx or _Exx methods and + * are not pointed to by any device _PRW methods indicating that + * these GPEs are generally intended for system or device wakeup + * (such GPEs have to be enabled directly when the devices whose + * _PRW methods point to them are set up for wakeup signaling). + * + ******************************************************************************/ + +acpi_status acpi_update_gpes(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(acpi_update_gpes); + + status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } else if (acpi_all_gpes_initialized) { + goto unlock; + } + + status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL); + if (ACPI_SUCCESS(status)) { + acpi_all_gpes_initialized = TRUE; + } + +unlock: + (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); + + return_ACPI_STATUS(status); +} diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c index 541cbc1544d5..ce9314f79451 100644 --- a/drivers/acpi/acpica/evxfregn.c +++ b/drivers/acpi/acpica/evxfregn.c @@ -64,6 +64,12 @@ ACPI_MODULE_NAME("evxfregn") * * DESCRIPTION: Install a handler for all op_regions of a given space_id. * + * NOTE: This function should only be called after acpi_enable_subsystem has + * been called. This is because any _REG methods associated with the Space ID + * are executed here, and these methods can only be safely executed after + * the default handlers have been installed and the hardware has been + * initialized (via acpi_enable_subsystem.) + * ******************************************************************************/ acpi_status acpi_install_address_space_handler(acpi_handle device, diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c index 047217303a4b..38293fd3e088 100644 --- a/drivers/acpi/acpica/exfldio.c +++ b/drivers/acpi/acpica/exfldio.c @@ -119,8 +119,8 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, } /* - * Exit now for SMBus or IPMI address space, it has a non-linear address space - * and the request cannot be directly validated + * Exit now for SMBus or IPMI address space, it has a non-linear + * address space and the request cannot be directly validated */ if (rgn_desc->region.space_id == ACPI_ADR_SPACE_SMBUS || rgn_desc->region.space_id == ACPI_ADR_SPACE_IPMI) { @@ -147,8 +147,7 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc, * (Region length is specified in bytes) */ if (rgn_desc->region.length < - (obj_desc->common_field.base_byte_offset + - field_datum_byte_offset + + (obj_desc->common_field.base_byte_offset + field_datum_byte_offset + obj_desc->common_field.access_byte_width)) { if (acpi_gbl_enable_interpreter_slack) { /* @@ -680,6 +679,7 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, u32 buffer_tail_bits; u32 datum_count; u32 field_datum_count; + u32 access_bit_width; u32 i; ACPI_FUNCTION_TRACE(ex_extract_from_field); @@ -694,16 +694,36 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, return_ACPI_STATUS(AE_BUFFER_OVERFLOW); } + ACPI_MEMSET(buffer, 0, buffer_length); + access_bit_width = ACPI_MUL_8(obj_desc->common_field.access_byte_width); + + /* Handle the simple case here */ + + if ((obj_desc->common_field.start_field_bit_offset == 0) && + (obj_desc->common_field.bit_length == access_bit_width)) { + status = acpi_ex_field_datum_io(obj_desc, 0, buffer, ACPI_READ); + return_ACPI_STATUS(status); + } + +/* TBD: Move to common setup code */ + + /* Field algorithm is limited to sizeof(u64), truncate if needed */ + + if (obj_desc->common_field.access_byte_width > sizeof(u64)) { + obj_desc->common_field.access_byte_width = sizeof(u64); + access_bit_width = sizeof(u64) * 8; + } /* Compute the number of datums (access width data items) */ - datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length, - obj_desc->common_field.access_bit_width); + datum_count = + ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length, + access_bit_width); + field_datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length + obj_desc->common_field. start_field_bit_offset, - obj_desc->common_field. access_bit_width); /* Priming read from the field */ @@ -738,12 +758,11 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, * This avoids the differences in behavior between different compilers * concerning shift values larger than the target data width. */ - if ((obj_desc->common_field.access_bit_width - - obj_desc->common_field.start_field_bit_offset) < + if (access_bit_width - + obj_desc->common_field.start_field_bit_offset < ACPI_INTEGER_BIT_SIZE) { merged_datum |= - raw_datum << (obj_desc->common_field. - access_bit_width - + raw_datum << (access_bit_width - obj_desc->common_field. start_field_bit_offset); } @@ -765,8 +784,7 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc, /* Mask off any extra bits in the last datum */ - buffer_tail_bits = obj_desc->common_field.bit_length % - obj_desc->common_field.access_bit_width; + buffer_tail_bits = obj_desc->common_field.bit_length % access_bit_width; if (buffer_tail_bits) { merged_datum &= ACPI_MASK_BITS_ABOVE(buffer_tail_bits); } @@ -798,6 +816,7 @@ acpi_status acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, void *buffer, u32 buffer_length) { + void *new_buffer; acpi_status status; u64 mask; u64 width_mask; @@ -808,9 +827,9 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, u32 buffer_tail_bits; u32 datum_count; u32 field_datum_count; - u32 i; + u32 access_bit_width; u32 required_length; - void *new_buffer; + u32 i; ACPI_FUNCTION_TRACE(ex_insert_into_field); @@ -844,17 +863,24 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, buffer_length = required_length; } +/* TBD: Move to common setup code */ + + /* Algo is limited to sizeof(u64), so cut the access_byte_width */ + if (obj_desc->common_field.access_byte_width > sizeof(u64)) { + obj_desc->common_field.access_byte_width = sizeof(u64); + } + + access_bit_width = ACPI_MUL_8(obj_desc->common_field.access_byte_width); + /* * Create the bitmasks used for bit insertion. * Note: This if/else is used to bypass compiler differences with the * shift operator */ - if (obj_desc->common_field.access_bit_width == ACPI_INTEGER_BIT_SIZE) { + if (access_bit_width == ACPI_INTEGER_BIT_SIZE) { width_mask = ACPI_UINT64_MAX; } else { - width_mask = - ACPI_MASK_BITS_ABOVE(obj_desc->common_field. - access_bit_width); + width_mask = ACPI_MASK_BITS_ABOVE(access_bit_width); } mask = width_mask & @@ -863,12 +889,11 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, /* Compute the number of datums (access width data items) */ datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length, - obj_desc->common_field.access_bit_width); + access_bit_width); field_datum_count = ACPI_ROUND_UP_TO(obj_desc->common_field.bit_length + obj_desc->common_field. start_field_bit_offset, - obj_desc->common_field. access_bit_width); /* Get initial Datum from the input buffer */ @@ -905,12 +930,11 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, * This avoids the differences in behavior between different compilers * concerning shift values larger than the target data width. */ - if ((obj_desc->common_field.access_bit_width - + if ((access_bit_width - obj_desc->common_field.start_field_bit_offset) < ACPI_INTEGER_BIT_SIZE) { merged_datum = - raw_datum >> (obj_desc->common_field. - access_bit_width - + raw_datum >> (access_bit_width - obj_desc->common_field. start_field_bit_offset); } else { @@ -929,6 +953,7 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, ACPI_MEMCPY(&raw_datum, ((char *)buffer) + buffer_offset, ACPI_MIN(obj_desc->common_field.access_byte_width, buffer_length - buffer_offset)); + merged_datum |= raw_datum << obj_desc->common_field.start_field_bit_offset; } @@ -937,7 +962,7 @@ acpi_ex_insert_into_field(union acpi_operand_object *obj_desc, buffer_tail_bits = (obj_desc->common_field.bit_length + obj_desc->common_field.start_field_bit_offset) % - obj_desc->common_field.access_bit_width; + access_bit_width; if (buffer_tail_bits) { mask &= ACPI_MASK_BITS_ABOVE(buffer_tail_bits); } diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c index f73be97043c0..6af14e43f839 100644 --- a/drivers/acpi/acpica/exmutex.c +++ b/drivers/acpi/acpica/exmutex.c @@ -336,7 +336,7 @@ acpi_status acpi_ex_release_mutex_object(union acpi_operand_object *obj_desc) /* Clear mutex info */ - obj_desc->mutex.thread_id = NULL; + obj_desc->mutex.thread_id = 0; return_ACPI_STATUS(status); } @@ -393,10 +393,10 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc, if ((owner_thread->thread_id != walk_state->thread->thread_id) && (obj_desc != acpi_gbl_global_lock_mutex)) { ACPI_ERROR((AE_INFO, - "Thread %p cannot release Mutex [%4.4s] acquired by thread %p", - ACPI_CAST_PTR(void, walk_state->thread->thread_id), + "Thread %u cannot release Mutex [%4.4s] acquired by thread %u", + (u32)walk_state->thread->thread_id, acpi_ut_get_node_name(obj_desc->mutex.node), - ACPI_CAST_PTR(void, owner_thread->thread_id))); + (u32)owner_thread->thread_id)); return_ACPI_STATUS(AE_AML_NOT_OWNER); } @@ -488,7 +488,7 @@ void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread) /* Mark mutex unowned */ obj_desc->mutex.owner_thread = NULL; - obj_desc->mutex.thread_id = NULL; + obj_desc->mutex.thread_id = 0; /* Update Thread sync_level (Last mutex is the important one) */ diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c index 98a331d2249b..7aae29f73d3f 100644 --- a/drivers/acpi/acpica/exprep.c +++ b/drivers/acpi/acpica/exprep.c @@ -355,12 +355,10 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc, return_ACPI_STATUS(AE_AML_OPERAND_VALUE); } - /* Setup width (access granularity) fields */ + /* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */ obj_desc->common_field.access_byte_width = (u8) - ACPI_DIV_8(access_bit_width); /* 1, 2, 4, 8 */ - - obj_desc->common_field.access_bit_width = (u8) access_bit_width; + ACPI_DIV_8(access_bit_width); /* * base_byte_offset is the address of the start of the field within the @@ -405,8 +403,9 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) { union acpi_operand_object *obj_desc; union acpi_operand_object *second_desc = NULL; - u32 type; acpi_status status; + u32 access_byte_width; + u32 type; ACPI_FUNCTION_TRACE(ex_prep_field_value); @@ -421,8 +420,8 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) type = acpi_ns_get_type(info->region_node); if (type != ACPI_TYPE_REGION) { ACPI_ERROR((AE_INFO, - "Needed Region, found type 0x%X (%s)", - type, acpi_ut_get_type_name(type))); + "Needed Region, found type 0x%X (%s)", type, + acpi_ut_get_type_name(type))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } @@ -438,7 +437,8 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) /* Initialize areas of the object that are common to all fields */ obj_desc->common_field.node = info->field_node; - status = acpi_ex_prep_common_field_object(obj_desc, info->field_flags, + status = acpi_ex_prep_common_field_object(obj_desc, + info->field_flags, info->attribute, info->field_bit_position, info->field_bit_length); @@ -455,26 +455,25 @@ acpi_status acpi_ex_prep_field_value(struct acpi_create_field_info *info) obj_desc->field.region_obj = acpi_ns_get_attached_object(info->region_node); - /* An additional reference for the container */ + /* Allow full data read from EC address space */ - acpi_ut_add_reference(obj_desc->field.region_obj); + if ((obj_desc->field.region_obj->region.space_id == + ACPI_ADR_SPACE_EC) + && (obj_desc->common_field.bit_length > 8)) { + access_byte_width = + ACPI_ROUND_BITS_UP_TO_BYTES(obj_desc->common_field. + bit_length); + + /* Maximum byte width supported is 255 */ - /* allow full data read from EC address space */ - if (obj_desc->field.region_obj->region.space_id == - ACPI_ADR_SPACE_EC) { - if (obj_desc->common_field.bit_length > 8) { - unsigned width = - ACPI_ROUND_BITS_UP_TO_BYTES( - obj_desc->common_field.bit_length); - // access_bit_width is u8, don't overflow it - if (width > 8) - width = 8; + if (access_byte_width < 256) { obj_desc->common_field.access_byte_width = - width; - obj_desc->common_field.access_bit_width = - 8 * width; + (u8)access_byte_width; } } + /* An additional reference for the container */ + + acpi_ut_add_reference(obj_desc->field.region_obj); ACPI_DEBUG_PRINT((ACPI_DB_BFIELD, "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n", diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 8819d2ac5aee..de17e10da0ed 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -353,7 +353,6 @@ acpi_ex_pci_config_space_handler(u32 function, acpi_status status = AE_OK; struct acpi_pci_id *pci_id; u16 pci_register; - u32 value32; ACPI_FUNCTION_TRACE(ex_pci_config_space_handler); @@ -381,8 +380,7 @@ acpi_ex_pci_config_space_handler(u32 function, case ACPI_READ: status = acpi_os_read_pci_configuration(pci_id, pci_register, - &value32, bit_width); - *value = value32; + value, bit_width); break; case ACPI_WRITE: diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c index 74c24d517f81..4093522eed45 100644 --- a/drivers/acpi/acpica/exutils.c +++ b/drivers/acpi/acpica/exutils.c @@ -109,7 +109,7 @@ void acpi_ex_enter_interpreter(void) * * DESCRIPTION: Reacquire the interpreter execution region from within the * interpreter code. Failure to enter the interpreter region is a - * fatal system error. Used in conjuction with + * fatal system error. Used in conjunction with * relinquish_interpreter * ******************************************************************************/ diff --git a/drivers/acpi/acpica/hwpci.c b/drivers/acpi/acpica/hwpci.c new file mode 100644 index 000000000000..ad21c7d8bf4f --- /dev/null +++ b/drivers/acpi/acpica/hwpci.c @@ -0,0 +1,412 @@ +/******************************************************************************* + * + * Module Name: hwpci - Obtain PCI bus, device, and function numbers + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2010, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_NAMESPACE +ACPI_MODULE_NAME("hwpci") + +/* PCI configuration space values */ +#define PCI_CFG_HEADER_TYPE_REG 0x0E +#define PCI_CFG_PRIMARY_BUS_NUMBER_REG 0x18 +#define PCI_CFG_SECONDARY_BUS_NUMBER_REG 0x19 +/* PCI header values */ +#define PCI_HEADER_TYPE_MASK 0x7F +#define PCI_TYPE_BRIDGE 0x01 +#define PCI_TYPE_CARDBUS_BRIDGE 0x02 +typedef struct acpi_pci_device { + acpi_handle device; + struct acpi_pci_device *next; + +} acpi_pci_device; + +/* Local prototypes */ + +static acpi_status +acpi_hw_build_pci_list(acpi_handle root_pci_device, + acpi_handle pci_region, + struct acpi_pci_device **return_list_head); + +static acpi_status +acpi_hw_process_pci_list(struct acpi_pci_id *pci_id, + struct acpi_pci_device *list_head); + +static void acpi_hw_delete_pci_list(struct acpi_pci_device *list_head); + +static acpi_status +acpi_hw_get_pci_device_info(struct acpi_pci_id *pci_id, + acpi_handle pci_device, + u16 *bus_number, u8 *is_bridge); + +/******************************************************************************* + * + * FUNCTION: acpi_hw_derive_pci_id + * + * PARAMETERS: pci_id - Initial values for the PCI ID. May be + * modified by this function. + * root_pci_device - A handle to a PCI device object. This + * object must be a PCI Root Bridge having a + * _HID value of either PNP0A03 or PNP0A08 + * pci_region - A handle to a PCI configuration space + * Operation Region being initialized + * + * RETURN: Status + * + * DESCRIPTION: This function derives a full PCI ID for a PCI device, + * consisting of a Segment number, Bus number, Device number, + * and function code. + * + * The PCI hardware dynamically configures PCI bus numbers + * depending on the bus topology discovered during system + * initialization. This function is invoked during configuration + * of a PCI_Config Operation Region in order to (possibly) update + * the Bus/Device/Function numbers in the pci_id with the actual + * values as determined by the hardware and operating system + * configuration. + * + * The pci_id parameter is initially populated during the Operation + * Region initialization. This function is then called, and is + * will make any necessary modifications to the Bus, Device, or + * Function number PCI ID subfields as appropriate for the + * current hardware and OS configuration. + * + * NOTE: Created 08/2010. Replaces the previous OSL acpi_os_derive_pci_id + * interface since this feature is OS-independent. This module + * specifically avoids any use of recursion by building a local + * temporary device list. + * + ******************************************************************************/ + +acpi_status +acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id, + acpi_handle root_pci_device, acpi_handle pci_region) +{ + acpi_status status; + struct acpi_pci_device *list_head = NULL; + + ACPI_FUNCTION_TRACE(hw_derive_pci_id); + + if (!pci_id) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + /* Build a list of PCI devices, from pci_region up to root_pci_device */ + + status = + acpi_hw_build_pci_list(root_pci_device, pci_region, &list_head); + if (ACPI_SUCCESS(status)) { + + /* Walk the list, updating the PCI device/function/bus numbers */ + + status = acpi_hw_process_pci_list(pci_id, list_head); + } + + /* Always delete the list */ + + acpi_hw_delete_pci_list(list_head); + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_build_pci_list + * + * PARAMETERS: root_pci_device - A handle to a PCI device object. This + * object is guaranteed to be a PCI Root + * Bridge having a _HID value of either + * PNP0A03 or PNP0A08 + * pci_region - A handle to the PCI configuration space + * Operation Region + * return_list_head - Where the PCI device list is returned + * + * RETURN: Status + * + * DESCRIPTION: Builds a list of devices from the input PCI region up to the + * Root PCI device for this namespace subtree. + * + ******************************************************************************/ + +static acpi_status +acpi_hw_build_pci_list(acpi_handle root_pci_device, + acpi_handle pci_region, + struct acpi_pci_device **return_list_head) +{ + acpi_handle current_device; + acpi_handle parent_device; + acpi_status status; + struct acpi_pci_device *list_element; + struct acpi_pci_device *list_head = NULL; + + /* + * Ascend namespace branch until the root_pci_device is reached, building + * a list of device nodes. Loop will exit when either the PCI device is + * found, or the root of the namespace is reached. + */ + current_device = pci_region; + while (1) { + status = acpi_get_parent(current_device, &parent_device); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Finished when we reach the PCI root device (PNP0A03 or PNP0A08) */ + + if (parent_device == root_pci_device) { + *return_list_head = list_head; + return (AE_OK); + } + + list_element = ACPI_ALLOCATE(sizeof(struct acpi_pci_device)); + if (!list_element) { + return (AE_NO_MEMORY); + } + + /* Put new element at the head of the list */ + + list_element->next = list_head; + list_element->device = parent_device; + list_head = list_element; + + current_device = parent_device; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_process_pci_list + * + * PARAMETERS: pci_id - Initial values for the PCI ID. May be + * modified by this function. + * list_head - Device list created by + * acpi_hw_build_pci_list + * + * RETURN: Status + * + * DESCRIPTION: Walk downward through the PCI device list, getting the device + * info for each, via the PCI configuration space and updating + * the PCI ID as necessary. Deletes the list during traversal. + * + ******************************************************************************/ + +static acpi_status +acpi_hw_process_pci_list(struct acpi_pci_id *pci_id, + struct acpi_pci_device *list_head) +{ + acpi_status status = AE_OK; + struct acpi_pci_device *info; + u16 bus_number; + u8 is_bridge = TRUE; + + ACPI_FUNCTION_NAME(hw_process_pci_list); + + ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, + "Input PciId: Seg %4.4X Bus %4.4X Dev %4.4X Func %4.4X\n", + pci_id->segment, pci_id->bus, pci_id->device, + pci_id->function)); + + bus_number = pci_id->bus; + + /* + * Descend down the namespace tree, collecting PCI device, function, + * and bus numbers. bus_number is only important for PCI bridges. + * Algorithm: As we descend the tree, use the last valid PCI device, + * function, and bus numbers that are discovered, and assign them + * to the PCI ID for the target device. + */ + info = list_head; + while (info) { + status = acpi_hw_get_pci_device_info(pci_id, info->device, + &bus_number, &is_bridge); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + info = info->next; + } + + ACPI_DEBUG_PRINT((ACPI_DB_OPREGION, + "Output PciId: Seg %4.4X Bus %4.4X Dev %4.4X Func %4.4X " + "Status %X BusNumber %X IsBridge %X\n", + pci_id->segment, pci_id->bus, pci_id->device, + pci_id->function, status, bus_number, is_bridge)); + + return_ACPI_STATUS(AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_delete_pci_list + * + * PARAMETERS: list_head - Device list created by + * acpi_hw_build_pci_list + * + * RETURN: None + * + * DESCRIPTION: Free the entire PCI list. + * + ******************************************************************************/ + +static void acpi_hw_delete_pci_list(struct acpi_pci_device *list_head) +{ + struct acpi_pci_device *next; + struct acpi_pci_device *previous; + + next = list_head; + while (next) { + previous = next; + next = previous->next; + ACPI_FREE(previous); + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_hw_get_pci_device_info + * + * PARAMETERS: pci_id - Initial values for the PCI ID. May be + * modified by this function. + * pci_device - Handle for the PCI device object + * bus_number - Where a PCI bridge bus number is returned + * is_bridge - Return value, indicates if this PCI + * device is a PCI bridge + * + * RETURN: Status + * + * DESCRIPTION: Get the device info for a single PCI device object. Get the + * _ADR (contains PCI device and function numbers), and for PCI + * bridge devices, get the bus number from PCI configuration + * space. + * + ******************************************************************************/ + +static acpi_status +acpi_hw_get_pci_device_info(struct acpi_pci_id *pci_id, + acpi_handle pci_device, + u16 *bus_number, u8 *is_bridge) +{ + acpi_status status; + acpi_object_type object_type; + u64 return_value; + u64 pci_value; + + /* We only care about objects of type Device */ + + status = acpi_get_type(pci_device, &object_type); + if (ACPI_FAILURE(status)) { + return (status); + } + + if (object_type != ACPI_TYPE_DEVICE) { + return (AE_OK); + } + + /* We need an _ADR. Ignore device if not present */ + + status = acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, + pci_device, &return_value); + if (ACPI_FAILURE(status)) { + return (AE_OK); + } + + /* + * From _ADR, get the PCI Device and Function and + * update the PCI ID. + */ + pci_id->device = ACPI_HIWORD(ACPI_LODWORD(return_value)); + pci_id->function = ACPI_LOWORD(ACPI_LODWORD(return_value)); + + /* + * If the previous device was a bridge, use the previous + * device bus number + */ + if (*is_bridge) { + pci_id->bus = *bus_number; + } + + /* + * Get the bus numbers from PCI Config space: + * + * First, get the PCI header_type + */ + *is_bridge = FALSE; + status = acpi_os_read_pci_configuration(pci_id, + PCI_CFG_HEADER_TYPE_REG, + &pci_value, 8); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* We only care about bridges (1=pci_bridge, 2=card_bus_bridge) */ + + pci_value &= PCI_HEADER_TYPE_MASK; + + if ((pci_value != PCI_TYPE_BRIDGE) && + (pci_value != PCI_TYPE_CARDBUS_BRIDGE)) { + return (AE_OK); + } + + /* Bridge: Get the Primary bus_number */ + + status = acpi_os_read_pci_configuration(pci_id, + PCI_CFG_PRIMARY_BUS_NUMBER_REG, + &pci_value, 8); + if (ACPI_FAILURE(status)) { + return (status); + } + + *is_bridge = TRUE; + pci_id->bus = (u16)pci_value; + + /* Bridge: Get the Secondary bus_number */ + + status = acpi_os_read_pci_configuration(pci_id, + PCI_CFG_SECONDARY_BUS_NUMBER_REG, + &pci_value, 8); + if (ACPI_FAILURE(status)) { + return (status); + } + + *bus_number = (u16)pci_value; + return (AE_OK); +} diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c index 4009498fbabd..4ef9f43ea926 100644 --- a/drivers/acpi/acpica/nsrepair2.c +++ b/drivers/acpi/acpica/nsrepair2.c @@ -74,10 +74,18 @@ acpi_ns_repair_ALR(struct acpi_predefined_data *data, union acpi_operand_object **return_object_ptr); static acpi_status +acpi_ns_repair_CID(struct acpi_predefined_data *data, + union acpi_operand_object **return_object_ptr); + +static acpi_status acpi_ns_repair_FDE(struct acpi_predefined_data *data, union acpi_operand_object **return_object_ptr); static acpi_status +acpi_ns_repair_HID(struct acpi_predefined_data *data, + union acpi_operand_object **return_object_ptr); + +static acpi_status acpi_ns_repair_PSS(struct acpi_predefined_data *data, union acpi_operand_object **return_object_ptr); @@ -108,8 +116,10 @@ acpi_ns_sort_list(union acpi_operand_object **elements, * As necessary: * * _ALR: Sort the list ascending by ambient_illuminance + * _CID: Strings: uppercase all, remove any leading asterisk * _FDE: Convert Buffer of BYTEs to a Buffer of DWORDs * _GTM: Convert Buffer of BYTEs to a Buffer of DWORDs + * _HID: Strings: uppercase all, remove any leading asterisk * _PSS: Sort the list descending by Power * _TSS: Sort the list descending by Power * @@ -122,8 +132,10 @@ acpi_ns_sort_list(union acpi_operand_object **elements, */ static const struct acpi_repair_info acpi_ns_repairable_names[] = { {"_ALR", acpi_ns_repair_ALR}, + {"_CID", acpi_ns_repair_CID}, {"_FDE", acpi_ns_repair_FDE}, {"_GTM", acpi_ns_repair_FDE}, /* _GTM has same repair as _FDE */ + {"_HID", acpi_ns_repair_HID}, {"_PSS", acpi_ns_repair_PSS}, {"_TSS", acpi_ns_repair_TSS}, {{0, 0, 0, 0}, NULL} /* Table terminator */ @@ -321,6 +333,157 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data, /****************************************************************************** * + * FUNCTION: acpi_ns_repair_CID + * + * PARAMETERS: Data - Pointer to validation data structure + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status. AE_OK if object is OK or was repaired successfully + * + * DESCRIPTION: Repair for the _CID object. If a string, ensure that all + * letters are uppercase and that there is no leading asterisk. + * If a Package, ensure same for all string elements. + * + *****************************************************************************/ + +static acpi_status +acpi_ns_repair_CID(struct acpi_predefined_data *data, + union acpi_operand_object **return_object_ptr) +{ + acpi_status status; + union acpi_operand_object *return_object = *return_object_ptr; + union acpi_operand_object **element_ptr; + union acpi_operand_object *original_element; + u16 original_ref_count; + u32 i; + + /* Check for _CID as a simple string */ + + if (return_object->common.type == ACPI_TYPE_STRING) { + status = acpi_ns_repair_HID(data, return_object_ptr); + return (status); + } + + /* Exit if not a Package */ + + if (return_object->common.type != ACPI_TYPE_PACKAGE) { + return (AE_OK); + } + + /* Examine each element of the _CID package */ + + element_ptr = return_object->package.elements; + for (i = 0; i < return_object->package.count; i++) { + original_element = *element_ptr; + original_ref_count = original_element->common.reference_count; + + status = acpi_ns_repair_HID(data, element_ptr); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Take care with reference counts */ + + if (original_element != *element_ptr) { + + /* Element was replaced */ + + (*element_ptr)->common.reference_count = + original_ref_count; + + acpi_ut_remove_reference(original_element); + } + + element_ptr++; + } + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_ns_repair_HID + * + * PARAMETERS: Data - Pointer to validation data structure + * return_object_ptr - Pointer to the object returned from the + * evaluation of a method or object + * + * RETURN: Status. AE_OK if object is OK or was repaired successfully + * + * DESCRIPTION: Repair for the _HID object. If a string, ensure that all + * letters are uppercase and that there is no leading asterisk. + * + *****************************************************************************/ + +static acpi_status +acpi_ns_repair_HID(struct acpi_predefined_data *data, + union acpi_operand_object **return_object_ptr) +{ + union acpi_operand_object *return_object = *return_object_ptr; + union acpi_operand_object *new_string; + char *source; + char *dest; + + ACPI_FUNCTION_NAME(ns_repair_HID); + + /* We only care about string _HID objects (not integers) */ + + if (return_object->common.type != ACPI_TYPE_STRING) { + return (AE_OK); + } + + if (return_object->string.length == 0) { + ACPI_WARN_PREDEFINED((AE_INFO, data->pathname, data->node_flags, + "Invalid zero-length _HID or _CID string")); + + /* Return AE_OK anyway, let driver handle it */ + + data->flags |= ACPI_OBJECT_REPAIRED; + return (AE_OK); + } + + /* It is simplest to always create a new string object */ + + new_string = acpi_ut_create_string_object(return_object->string.length); + if (!new_string) { + return (AE_NO_MEMORY); + } + + /* + * Remove a leading asterisk if present. For some unknown reason, there + * are many machines in the field that contains IDs like this. + * + * Examples: "*PNP0C03", "*ACPI0003" + */ + source = return_object->string.pointer; + if (*source == '*') { + source++; + new_string->string.length--; + + ACPI_DEBUG_PRINT((ACPI_DB_REPAIR, + "%s: Removed invalid leading asterisk\n", + data->pathname)); + } + + /* + * Copy and uppercase the string. From the ACPI specification: + * + * A valid PNP ID must be of the form "AAA####" where A is an uppercase + * letter and # is a hex digit. A valid ACPI ID must be of the form + * "ACPI####" where # is a hex digit. + */ + for (dest = new_string->string.pointer; *source; dest++, source++) { + *dest = (char)ACPI_TOUPPER(*source); + } + + acpi_ut_remove_reference(return_object); + *return_object_ptr = new_string; + return (AE_OK); +} + +/****************************************************************************** + * * FUNCTION: acpi_ns_repair_TSS * * PARAMETERS: Data - Pointer to validation data structure diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c index e1add3491b04..a7d6ad9c111b 100644 --- a/drivers/acpi/acpica/nsutils.c +++ b/drivers/acpi/acpica/nsutils.c @@ -60,104 +60,6 @@ acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search); /******************************************************************************* * - * FUNCTION: acpi_ns_report_error - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * internal_name - Name or path of the namespace node - * lookup_status - Exception code from NS lookup - * - * RETURN: None - * - * DESCRIPTION: Print warning message with full pathname - * - ******************************************************************************/ - -void -acpi_ns_report_error(const char *module_name, - u32 line_number, - const char *internal_name, acpi_status lookup_status) -{ - acpi_status status; - u32 bad_name; - char *name = NULL; - - acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number); - - if (lookup_status == AE_BAD_CHARACTER) { - - /* There is a non-ascii character in the name */ - - ACPI_MOVE_32_TO_32(&bad_name, - ACPI_CAST_PTR(u32, internal_name)); - acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name); - } else { - /* Convert path to external format */ - - status = acpi_ns_externalize_name(ACPI_UINT32_MAX, - internal_name, NULL, &name); - - /* Print target name */ - - if (ACPI_SUCCESS(status)) { - acpi_os_printf("[%s]", name); - } else { - acpi_os_printf("[COULD NOT EXTERNALIZE NAME]"); - } - - if (name) { - ACPI_FREE(name); - } - } - - acpi_os_printf(" Namespace lookup failure, %s\n", - acpi_format_exception(lookup_status)); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ns_report_method_error - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * Message - Error message to use on failure - * prefix_node - Prefix relative to the path - * Path - Path to the node (optional) - * method_status - Execution status - * - * RETURN: None - * - * DESCRIPTION: Print warning message with full pathname - * - ******************************************************************************/ - -void -acpi_ns_report_method_error(const char *module_name, - u32 line_number, - const char *message, - struct acpi_namespace_node *prefix_node, - const char *path, acpi_status method_status) -{ - acpi_status status; - struct acpi_namespace_node *node = prefix_node; - - acpi_os_printf("ACPI Error (%s-%04d): ", module_name, line_number); - - if (path) { - status = - acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH, - &node); - if (ACPI_FAILURE(status)) { - acpi_os_printf("[Could not get node by pathname]"); - } - } - - acpi_ns_print_node_pathname(node, message); - acpi_os_printf(", %s\n", acpi_format_exception(method_status)); -} - -/******************************************************************************* - * * FUNCTION: acpi_ns_print_node_pathname * * PARAMETERS: Node - Object diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c index 22cfcfbd9fff..491191e6cf69 100644 --- a/drivers/acpi/acpica/rsutils.c +++ b/drivers/acpi/acpica/rsutils.c @@ -149,7 +149,7 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type) /* * 16-, 32-, and 64-bit cases must use the move macros that perform - * endian conversion and/or accomodate hardware that cannot perform + * endian conversion and/or accommodate hardware that cannot perform * misaligned memory transfers */ case ACPI_RSC_MOVE16: diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index 1728cb9bf600..d2ff4325c427 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -49,7 +49,7 @@ ACPI_MODULE_NAME("tbfadt") /* Local prototypes */ -static inline void +static ACPI_INLINE void acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, u8 space_id, u8 byte_width, u64 address); @@ -181,7 +181,7 @@ static struct acpi_fadt_pm_info fadt_pm_info_table[] = { * ******************************************************************************/ -static inline void +static ACPI_INLINE void acpi_tb_init_generic_address(struct acpi_generic_address *generic_address, u8 space_id, u8 byte_width, u64 address) { diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c index 983510640059..f21c486929a5 100644 --- a/drivers/acpi/acpica/utdebug.c +++ b/drivers/acpi/acpica/utdebug.c @@ -179,9 +179,8 @@ acpi_debug_print(u32 requested_debug_level, if (thread_id != acpi_gbl_prev_thread_id) { if (ACPI_LV_THREADS & acpi_dbg_level) { acpi_os_printf - ("\n**** Context Switch from TID %p to TID %p ****\n\n", - ACPI_CAST_PTR(void, acpi_gbl_prev_thread_id), - ACPI_CAST_PTR(void, thread_id)); + ("\n**** Context Switch from TID %u to TID %u ****\n\n", + (u32)acpi_gbl_prev_thread_id, (u32)thread_id); } acpi_gbl_prev_thread_id = thread_id; @@ -194,7 +193,7 @@ acpi_debug_print(u32 requested_debug_level, acpi_os_printf("%8s-%04ld ", module_name, line_number); if (ACPI_LV_THREADS & acpi_dbg_level) { - acpi_os_printf("[%p] ", ACPI_CAST_PTR(void, thread_id)); + acpi_os_printf("[%u] ", (u32)thread_id); } acpi_os_printf("[%02ld] %-22.22s: ", diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c index 6dfdeb653490..22f59ef604e0 100644 --- a/drivers/acpi/acpica/uteval.c +++ b/drivers/acpi/acpica/uteval.c @@ -48,153 +48,6 @@ #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("uteval") -/* - * Strings supported by the _OSI predefined (internal) method. - * - * March 2009: Removed "Linux" as this host no longer wants to respond true - * for this string. Basically, the only safe OS strings are windows-related - * and in many or most cases represent the only test path within the - * BIOS-provided ASL code. - * - * The second element of each entry is used to track the newest version of - * Windows that the BIOS has requested. - */ -static struct acpi_interface_info acpi_interfaces_supported[] = { - /* Operating System Vendor Strings */ - - {"Windows 2000", ACPI_OSI_WIN_2000}, /* Windows 2000 */ - {"Windows 2001", ACPI_OSI_WIN_XP}, /* Windows XP */ - {"Windows 2001 SP1", ACPI_OSI_WIN_XP_SP1}, /* Windows XP SP1 */ - {"Windows 2001.1", ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */ - {"Windows 2001 SP2", ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */ - {"Windows 2001.1 SP1", ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */ - {"Windows 2006", ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */ - {"Windows 2006.1", ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */ - {"Windows 2006 SP1", ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */ - {"Windows 2009", ACPI_OSI_WIN_7}, /* Windows 7 and Server 2008 R2 - Added 09/2009 */ - - /* Feature Group Strings */ - - {"Extended Address Space Descriptor", 0} - - /* - * All "optional" feature group strings (features that are implemented - * by the host) should be implemented in the host version of - * acpi_os_validate_interface and should not be added here. - */ -}; - -/******************************************************************************* - * - * FUNCTION: acpi_ut_osi_implementation - * - * PARAMETERS: walk_state - Current walk state - * - * RETURN: Status - * - * DESCRIPTION: Implementation of the _OSI predefined control method - * - ******************************************************************************/ - -acpi_status acpi_ut_osi_implementation(struct acpi_walk_state *walk_state) -{ - acpi_status status; - union acpi_operand_object *string_desc; - union acpi_operand_object *return_desc; - u32 return_value; - u32 i; - - ACPI_FUNCTION_TRACE(ut_osi_implementation); - - /* Validate the string input argument */ - - string_desc = walk_state->arguments[0].object; - if (!string_desc || (string_desc->common.type != ACPI_TYPE_STRING)) { - return_ACPI_STATUS(AE_TYPE); - } - - /* Create a return object */ - - return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); - if (!return_desc) { - return_ACPI_STATUS(AE_NO_MEMORY); - } - - /* Default return value is 0, NOT SUPPORTED */ - - return_value = 0; - - /* Compare input string to static table of supported interfaces */ - - for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) { - if (!ACPI_STRCMP(string_desc->string.pointer, - acpi_interfaces_supported[i].name)) { - /* - * The interface is supported. - * Update the osi_data if necessary. We keep track of the latest - * version of Windows that has been requested by the BIOS. - */ - if (acpi_interfaces_supported[i].value > - acpi_gbl_osi_data) { - acpi_gbl_osi_data = - acpi_interfaces_supported[i].value; - } - - return_value = ACPI_UINT32_MAX; - goto exit; - } - } - - /* - * Did not match the string in the static table, call the host OSL to - * check for a match with one of the optional strings (such as - * "Module Device", "3.0 Thermal Model", etc.) - */ - status = acpi_os_validate_interface(string_desc->string.pointer); - if (ACPI_SUCCESS(status)) { - - /* The interface is supported */ - - return_value = ACPI_UINT32_MAX; - } - -exit: - ACPI_DEBUG_PRINT_RAW ((ACPI_DB_INFO, - "ACPI: BIOS _OSI(%s) is %ssupported\n", - string_desc->string.pointer, return_value == 0 ? "not " : "")); - - /* Complete the return value */ - - return_desc->integer.value = return_value; - walk_state->return_desc = return_desc; - return_ACPI_STATUS (AE_OK); -} - -/******************************************************************************* - * - * FUNCTION: acpi_osi_invalidate - * - * PARAMETERS: interface_string - * - * RETURN: Status - * - * DESCRIPTION: invalidate string in pre-defiend _OSI string list - * - ******************************************************************************/ - -acpi_status acpi_osi_invalidate(char *interface) -{ - int i; - - for (i = 0; i < ACPI_ARRAY_LENGTH(acpi_interfaces_supported); i++) { - if (!ACPI_STRCMP(interface, acpi_interfaces_supported[i].name)) { - *acpi_interfaces_supported[i].name = '\0'; - return AE_OK; - } - } - return AE_NOT_FOUND; -} - /******************************************************************************* * * FUNCTION: acpi_ut_evaluate_object diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c index 0558747579ef..e87bc6760be6 100644 --- a/drivers/acpi/acpica/utglobal.c +++ b/drivers/acpi/acpica/utglobal.c @@ -154,14 +154,16 @@ ACPI_EXPORT_SYMBOL(acpi_format_exception) * 1) _SB_ is defined to be a device to allow \_SB_._INI to be run * during the initialization sequence. * 2) _TZ_ is defined to be a thermal zone in order to allow ASL code to - * perform a Notify() operation on it. + * perform a Notify() operation on it. 09/2010: Changed to type Device. + * This still allows notifies, but does not confuse host code that + * searches for valid thermal_zone objects. */ const struct acpi_predefined_names acpi_gbl_pre_defined_names[] = { {"_GPE", ACPI_TYPE_LOCAL_SCOPE, NULL}, {"_PR_", ACPI_TYPE_LOCAL_SCOPE, NULL}, {"_SB_", ACPI_TYPE_DEVICE, NULL}, {"_SI_", ACPI_TYPE_LOCAL_SCOPE, NULL}, - {"_TZ_", ACPI_TYPE_THERMAL, NULL}, + {"_TZ_", ACPI_TYPE_DEVICE, NULL}, {"_REV", ACPI_TYPE_INTEGER, (char *)ACPI_CA_SUPPORT_LEVEL}, {"_OS_", ACPI_TYPE_STRING, ACPI_OS_NAME}, {"_GL_", ACPI_TYPE_MUTEX, (char *)1}, @@ -766,6 +768,7 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_gpe_fadt_blocks[0] = NULL; acpi_gbl_gpe_fadt_blocks[1] = NULL; acpi_current_gpe_count = 0; + acpi_all_gpes_initialized = FALSE; /* Global handlers */ @@ -774,6 +777,7 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_exception_handler = NULL; acpi_gbl_init_handler = NULL; acpi_gbl_table_handler = NULL; + acpi_gbl_interface_handler = NULL; /* Global Lock support */ @@ -800,6 +804,7 @@ acpi_status acpi_ut_init_globals(void) acpi_gbl_debugger_configuration = DEBUGGER_THREADING; acpi_gbl_db_output_flags = ACPI_DB_CONSOLE_OUTPUT; acpi_gbl_osi_data = 0; + acpi_gbl_osi_mutex = NULL; /* Hardware oriented */ diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c index 1397fadd0d4b..d2906328535d 100644 --- a/drivers/acpi/acpica/utids.c +++ b/drivers/acpi/acpica/utids.c @@ -48,42 +48,6 @@ #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utids") -/* Local prototypes */ -static void acpi_ut_copy_id_string(char *destination, char *source); - -/******************************************************************************* - * - * FUNCTION: acpi_ut_copy_id_string - * - * PARAMETERS: Destination - Where to copy the string - * Source - Source string - * - * RETURN: None - * - * DESCRIPTION: Copies an ID string for the _HID, _CID, and _UID methods. - * Performs removal of a leading asterisk if present -- workaround - * for a known issue on a bunch of machines. - * - ******************************************************************************/ - -static void acpi_ut_copy_id_string(char *destination, char *source) -{ - - /* - * Workaround for ID strings that have a leading asterisk. This construct - * is not allowed by the ACPI specification (ID strings must be - * alphanumeric), but enough existing machines have this embedded in their - * ID strings that the following code is useful. - */ - if (*source == '*') { - source++; - } - - /* Do the actual copy */ - - ACPI_STRCPY(destination, source); -} - /******************************************************************************* * * FUNCTION: acpi_ut_execute_HID @@ -101,7 +65,6 @@ static void acpi_ut_copy_id_string(char *destination, char *source) * NOTE: Internal function, no parameter validation * ******************************************************************************/ - acpi_status acpi_ut_execute_HID(struct acpi_namespace_node *device_node, struct acpica_device_id **return_id) @@ -147,7 +110,7 @@ acpi_ut_execute_HID(struct acpi_namespace_node *device_node, if (obj_desc->common.type == ACPI_TYPE_INTEGER) { acpi_ex_eisa_id_to_string(hid->string, obj_desc->integer.value); } else { - acpi_ut_copy_id_string(hid->string, obj_desc->string.pointer); + ACPI_STRCPY(hid->string, obj_desc->string.pointer); } hid->length = length; @@ -224,7 +187,7 @@ acpi_ut_execute_UID(struct acpi_namespace_node *device_node, if (obj_desc->common.type == ACPI_TYPE_INTEGER) { acpi_ex_integer_to_string(uid->string, obj_desc->integer.value); } else { - acpi_ut_copy_id_string(uid->string, obj_desc->string.pointer); + ACPI_STRCPY(uid->string, obj_desc->string.pointer); } uid->length = length; @@ -357,8 +320,8 @@ acpi_ut_execute_CID(struct acpi_namespace_node *device_node, /* Copy the String CID from the returned object */ - acpi_ut_copy_id_string(next_id_string, - cid_objects[i]->string.pointer); + ACPI_STRCPY(next_id_string, + cid_objects[i]->string.pointer); length = cid_objects[i]->string.length + 1; } diff --git a/drivers/acpi/acpica/utinit.c b/drivers/acpi/acpica/utinit.c index a39c93dac719..c1b1c803ea9b 100644 --- a/drivers/acpi/acpica/utinit.c +++ b/drivers/acpi/acpica/utinit.c @@ -117,6 +117,10 @@ void acpi_ut_subsystem_shutdown(void) /* Close the acpi_event Handling */ acpi_ev_terminate(); + + /* Delete any dynamic _OSI interfaces */ + + acpi_ut_interface_terminate(); #endif /* Close the Namespace */ diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c index 35059a14eb72..49cf7b7fd816 100644 --- a/drivers/acpi/acpica/utmath.c +++ b/drivers/acpi/acpica/utmath.c @@ -48,11 +48,27 @@ ACPI_MODULE_NAME("utmath") /* - * Support for double-precision integer divide. This code is included here - * in order to support kernel environments where the double-precision math - * library is not available. + * Optional support for 64-bit double-precision integer divide. This code + * is configurable and is implemented in order to support 32-bit kernel + * environments where a 64-bit double-precision math library is not available. + * + * Support for a more normal 64-bit divide/modulo (with check for a divide- + * by-zero) appears after this optional section of code. */ #ifndef ACPI_USE_NATIVE_DIVIDE +/* Structures used only for 64-bit divide */ +typedef struct uint64_struct { + u32 lo; + u32 hi; + +} uint64_struct; + +typedef union uint64_overlay { + u64 full; + struct uint64_struct part; + +} uint64_overlay; + /******************************************************************************* * * FUNCTION: acpi_ut_short_divide @@ -69,6 +85,7 @@ ACPI_MODULE_NAME("utmath") * 32-bit remainder. * ******************************************************************************/ + acpi_status acpi_ut_short_divide(u64 dividend, u32 divisor, u64 *out_quotient, u32 *out_remainder) diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c index e8d0724ee403..c7d0e05ef5a4 100644 --- a/drivers/acpi/acpica/utmisc.c +++ b/drivers/acpi/acpica/utmisc.c @@ -50,11 +50,6 @@ #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utmisc") -/* - * Common suffix for messages - */ -#define ACPI_COMMON_MSG_SUFFIX \ - acpi_os_printf(" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number) /******************************************************************************* * * FUNCTION: acpi_ut_validate_exception @@ -1044,160 +1039,3 @@ acpi_ut_walk_package_tree(union acpi_operand_object * source_object, return_ACPI_STATUS(AE_AML_INTERNAL); } - -/******************************************************************************* - * - * FUNCTION: acpi_error, acpi_exception, acpi_warning, acpi_info - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * Format - Printf format string + additional args - * - * RETURN: None - * - * DESCRIPTION: Print message with module/line/version info - * - ******************************************************************************/ - -void ACPI_INTERNAL_VAR_XFACE -acpi_error(const char *module_name, u32 line_number, const char *format, ...) -{ - va_list args; - - acpi_os_printf("ACPI Error: "); - - va_start(args, format); - acpi_os_vprintf(format, args); - ACPI_COMMON_MSG_SUFFIX; - va_end(args); -} - -void ACPI_INTERNAL_VAR_XFACE -acpi_exception(const char *module_name, - u32 line_number, acpi_status status, const char *format, ...) -{ - va_list args; - - acpi_os_printf("ACPI Exception: %s, ", acpi_format_exception(status)); - - va_start(args, format); - acpi_os_vprintf(format, args); - ACPI_COMMON_MSG_SUFFIX; - va_end(args); -} - -void ACPI_INTERNAL_VAR_XFACE -acpi_warning(const char *module_name, u32 line_number, const char *format, ...) -{ - va_list args; - - acpi_os_printf("ACPI Warning: "); - - va_start(args, format); - acpi_os_vprintf(format, args); - ACPI_COMMON_MSG_SUFFIX; - va_end(args); -} - -void ACPI_INTERNAL_VAR_XFACE -acpi_info(const char *module_name, u32 line_number, const char *format, ...) -{ - va_list args; - - acpi_os_printf("ACPI: "); - - va_start(args, format); - acpi_os_vprintf(format, args); - acpi_os_printf("\n"); - va_end(args); -} - -ACPI_EXPORT_SYMBOL(acpi_error) -ACPI_EXPORT_SYMBOL(acpi_exception) -ACPI_EXPORT_SYMBOL(acpi_warning) -ACPI_EXPORT_SYMBOL(acpi_info) - -/******************************************************************************* - * - * FUNCTION: acpi_ut_predefined_warning - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * Pathname - Full pathname to the node - * node_flags - From Namespace node for the method/object - * Format - Printf format string + additional args - * - * RETURN: None - * - * DESCRIPTION: Warnings for the predefined validation module. Messages are - * only emitted the first time a problem with a particular - * method/object is detected. This prevents a flood of error - * messages for methods that are repeatedly evaluated. - * -******************************************************************************/ - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_warning(const char *module_name, - u32 line_number, - char *pathname, - u8 node_flags, const char *format, ...) -{ - va_list args; - - /* - * Warning messages for this method/object will be disabled after the - * first time a validation fails or an object is successfully repaired. - */ - if (node_flags & ANOBJ_EVALUATED) { - return; - } - - acpi_os_printf("ACPI Warning for %s: ", pathname); - - va_start(args, format); - acpi_os_vprintf(format, args); - ACPI_COMMON_MSG_SUFFIX; - va_end(args); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ut_predefined_info - * - * PARAMETERS: module_name - Caller's module name (for error output) - * line_number - Caller's line number (for error output) - * Pathname - Full pathname to the node - * node_flags - From Namespace node for the method/object - * Format - Printf format string + additional args - * - * RETURN: None - * - * DESCRIPTION: Info messages for the predefined validation module. Messages - * are only emitted the first time a problem with a particular - * method/object is detected. This prevents a flood of - * messages for methods that are repeatedly evaluated. - * - ******************************************************************************/ - -void ACPI_INTERNAL_VAR_XFACE -acpi_ut_predefined_info(const char *module_name, - u32 line_number, - char *pathname, u8 node_flags, const char *format, ...) -{ - va_list args; - - /* - * Warning messages for this method/object will be disabled after the - * first time a validation fails or an object is successfully repaired. - */ - if (node_flags & ANOBJ_EVALUATED) { - return; - } - - acpi_os_printf("ACPI Info for %s: ", pathname); - - va_start(args, format); - acpi_os_vprintf(format, args); - ACPI_COMMON_MSG_SUFFIX; - va_end(args); -} diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c index f5cca3a1300c..d9efa495b433 100644 --- a/drivers/acpi/acpica/utmutex.c +++ b/drivers/acpi/acpica/utmutex.c @@ -86,6 +86,12 @@ acpi_status acpi_ut_mutex_initialize(void) spin_lock_init(acpi_gbl_gpe_lock); spin_lock_init(acpi_gbl_hardware_lock); + /* Mutex for _OSI support */ + status = acpi_os_create_mutex(&acpi_gbl_osi_mutex); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + /* Create the reader/writer lock for namespace access */ status = acpi_ut_create_rw_lock(&acpi_gbl_namespace_rw_lock); @@ -117,6 +123,8 @@ void acpi_ut_mutex_terminate(void) acpi_ut_delete_mutex(i); } + acpi_os_delete_mutex(acpi_gbl_osi_mutex); + /* Delete the spinlocks */ acpi_os_delete_lock(acpi_gbl_gpe_lock); @@ -220,18 +228,17 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id) if (acpi_gbl_mutex_info[i].thread_id == this_thread_id) { if (i == mutex_id) { ACPI_ERROR((AE_INFO, - "Mutex [%s] already acquired by this thread [%p]", + "Mutex [%s] already acquired by this thread [%u]", acpi_ut_get_mutex_name (mutex_id), - ACPI_CAST_PTR(void, - this_thread_id))); + (u32)this_thread_id)); return (AE_ALREADY_ACQUIRED); } ACPI_ERROR((AE_INFO, - "Invalid acquire order: Thread %p owns [%s], wants [%s]", - ACPI_CAST_PTR(void, this_thread_id), + "Invalid acquire order: Thread %u owns [%s], wants [%s]", + (u32)this_thread_id, acpi_ut_get_mutex_name(i), acpi_ut_get_mutex_name(mutex_id))); @@ -242,24 +249,24 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id) #endif ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, - "Thread %p attempting to acquire Mutex [%s]\n", - ACPI_CAST_PTR(void, this_thread_id), + "Thread %u attempting to acquire Mutex [%s]\n", + (u32)this_thread_id, acpi_ut_get_mutex_name(mutex_id))); status = acpi_os_acquire_mutex(acpi_gbl_mutex_info[mutex_id].mutex, ACPI_WAIT_FOREVER); if (ACPI_SUCCESS(status)) { ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, - "Thread %p acquired Mutex [%s]\n", - ACPI_CAST_PTR(void, this_thread_id), + "Thread %u acquired Mutex [%s]\n", + (u32)this_thread_id, acpi_ut_get_mutex_name(mutex_id))); acpi_gbl_mutex_info[mutex_id].use_count++; acpi_gbl_mutex_info[mutex_id].thread_id = this_thread_id; } else { ACPI_EXCEPTION((AE_INFO, status, - "Thread %p could not acquire Mutex [0x%X]", - ACPI_CAST_PTR(void, this_thread_id), mutex_id)); + "Thread %u could not acquire Mutex [0x%X]", + (u32)this_thread_id, mutex_id)); } return (status); @@ -279,10 +286,14 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id) acpi_status acpi_ut_release_mutex(acpi_mutex_handle mutex_id) { + acpi_thread_id this_thread_id; + ACPI_FUNCTION_NAME(ut_release_mutex); - ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Thread %p releasing Mutex [%s]\n", - ACPI_CAST_PTR(void, acpi_os_get_thread_id()), + this_thread_id = acpi_os_get_thread_id(); + + ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Thread %u releasing Mutex [%s]\n", + (u32)this_thread_id, acpi_ut_get_mutex_name(mutex_id))); if (mutex_id > ACPI_MAX_MUTEX) { diff --git a/drivers/acpi/acpica/utosi.c b/drivers/acpi/acpica/utosi.c new file mode 100644 index 000000000000..18c59a85fdca --- /dev/null +++ b/drivers/acpi/acpica/utosi.c @@ -0,0 +1,380 @@ +/****************************************************************************** + * + * Module Name: utosi - Support for the _OSI predefined control method + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2010, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utosi") + +/* + * Strings supported by the _OSI predefined control method (which is + * implemented internally within this module.) + * + * March 2009: Removed "Linux" as this host no longer wants to respond true + * for this string. Basically, the only safe OS strings are windows-related + * and in many or most cases represent the only test path within the + * BIOS-provided ASL code. + * + * The last element of each entry is used to track the newest version of + * Windows that the BIOS has requested. + */ +static struct acpi_interface_info acpi_default_supported_interfaces[] = { + /* Operating System Vendor Strings */ + + {"Windows 2000", NULL, 0, ACPI_OSI_WIN_2000}, /* Windows 2000 */ + {"Windows 2001", NULL, 0, ACPI_OSI_WIN_XP}, /* Windows XP */ + {"Windows 2001 SP1", NULL, 0, ACPI_OSI_WIN_XP_SP1}, /* Windows XP SP1 */ + {"Windows 2001.1", NULL, 0, ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */ + {"Windows 2001 SP2", NULL, 0, ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */ + {"Windows 2001.1 SP1", NULL, 0, ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */ + {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */ + {"Windows 2006.1", NULL, 0, ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */ + {"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */ + {"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2}, /* Windows Vista SP2 - Added 09/2010 */ + {"Windows 2009", NULL, 0, ACPI_OSI_WIN_7}, /* Windows 7 and Server 2008 R2 - Added 09/2009 */ + + /* Feature Group Strings */ + + {"Extended Address Space Descriptor", NULL, 0, 0} + + /* + * All "optional" feature group strings (features that are implemented + * by the host) should be dynamically added by the host via + * acpi_install_interface and should not be manually added here. + * + * Examples of optional feature group strings: + * + * "Module Device" + * "Processor Device" + * "3.0 Thermal Model" + * "3.0 _SCP Extensions" + * "Processor Aggregator Device" + */ +}; + +/******************************************************************************* + * + * FUNCTION: acpi_ut_initialize_interfaces + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Initialize the global _OSI supported interfaces list + * + ******************************************************************************/ + +acpi_status acpi_ut_initialize_interfaces(void) +{ + u32 i; + + (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); + acpi_gbl_supported_interfaces = acpi_default_supported_interfaces; + + /* Link the static list of supported interfaces */ + + for (i = 0; + i < (ACPI_ARRAY_LENGTH(acpi_default_supported_interfaces) - 1); + i++) { + acpi_default_supported_interfaces[i].next = + &acpi_default_supported_interfaces[(acpi_size) i + 1]; + } + + acpi_os_release_mutex(acpi_gbl_osi_mutex); + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_interface_terminate + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Delete all interfaces in the global list. Sets + * acpi_gbl_supported_interfaces to NULL. + * + ******************************************************************************/ + +void acpi_ut_interface_terminate(void) +{ + struct acpi_interface_info *next_interface; + + (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); + next_interface = acpi_gbl_supported_interfaces; + + while (next_interface) { + acpi_gbl_supported_interfaces = next_interface->next; + + /* Only interfaces added at runtime can be freed */ + + if (next_interface->flags & ACPI_OSI_DYNAMIC) { + ACPI_FREE(next_interface->name); + ACPI_FREE(next_interface); + } + + next_interface = acpi_gbl_supported_interfaces; + } + + acpi_os_release_mutex(acpi_gbl_osi_mutex); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_install_interface + * + * PARAMETERS: interface_name - The interface to install + * + * RETURN: Status + * + * DESCRIPTION: Install the interface into the global interface list. + * Caller MUST hold acpi_gbl_osi_mutex + * + ******************************************************************************/ + +acpi_status acpi_ut_install_interface(acpi_string interface_name) +{ + struct acpi_interface_info *interface_info; + + /* Allocate info block and space for the name string */ + + interface_info = + ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_interface_info)); + if (!interface_info) { + return (AE_NO_MEMORY); + } + + interface_info->name = + ACPI_ALLOCATE_ZEROED(ACPI_STRLEN(interface_name) + 1); + if (!interface_info->name) { + ACPI_FREE(interface_info); + return (AE_NO_MEMORY); + } + + /* Initialize new info and insert at the head of the global list */ + + ACPI_STRCPY(interface_info->name, interface_name); + interface_info->flags = ACPI_OSI_DYNAMIC; + interface_info->next = acpi_gbl_supported_interfaces; + + acpi_gbl_supported_interfaces = interface_info; + return (AE_OK); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_remove_interface + * + * PARAMETERS: interface_name - The interface to remove + * + * RETURN: Status + * + * DESCRIPTION: Remove the interface from the global interface list. + * Caller MUST hold acpi_gbl_osi_mutex + * + ******************************************************************************/ + +acpi_status acpi_ut_remove_interface(acpi_string interface_name) +{ + struct acpi_interface_info *previous_interface; + struct acpi_interface_info *next_interface; + + previous_interface = next_interface = acpi_gbl_supported_interfaces; + while (next_interface) { + if (!ACPI_STRCMP(interface_name, next_interface->name)) { + + /* Found: name is in either the static list or was added at runtime */ + + if (next_interface->flags & ACPI_OSI_DYNAMIC) { + + /* Interface was added dynamically, remove and free it */ + + if (previous_interface == next_interface) { + acpi_gbl_supported_interfaces = + next_interface->next; + } else { + previous_interface->next = + next_interface->next; + } + + ACPI_FREE(next_interface->name); + ACPI_FREE(next_interface); + } else { + /* + * Interface is in static list. If marked invalid, then it + * does not actually exist. Else, mark it invalid. + */ + if (next_interface->flags & ACPI_OSI_INVALID) { + return (AE_NOT_EXIST); + } + + next_interface->flags |= ACPI_OSI_INVALID; + } + + return (AE_OK); + } + + previous_interface = next_interface; + next_interface = next_interface->next; + } + + /* Interface was not found */ + + return (AE_NOT_EXIST); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_get_interface + * + * PARAMETERS: interface_name - The interface to find + * + * RETURN: struct acpi_interface_info if found. NULL if not found. + * + * DESCRIPTION: Search for the specified interface name in the global list. + * Caller MUST hold acpi_gbl_osi_mutex + * + ******************************************************************************/ + +struct acpi_interface_info *acpi_ut_get_interface(acpi_string interface_name) +{ + struct acpi_interface_info *next_interface; + + next_interface = acpi_gbl_supported_interfaces; + while (next_interface) { + if (!ACPI_STRCMP(interface_name, next_interface->name)) { + return (next_interface); + } + + next_interface = next_interface->next; + } + + return (NULL); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_osi_implementation + * + * PARAMETERS: walk_state - Current walk state + * + * RETURN: Status + * + * DESCRIPTION: Implementation of the _OSI predefined control method. When + * an invocation of _OSI is encountered in the system AML, + * control is transferred to this function. + * + ******************************************************************************/ + +acpi_status acpi_ut_osi_implementation(struct acpi_walk_state * walk_state) +{ + union acpi_operand_object *string_desc; + union acpi_operand_object *return_desc; + struct acpi_interface_info *interface_info; + acpi_interface_handler interface_handler; + u32 return_value; + + ACPI_FUNCTION_TRACE(ut_osi_implementation); + + /* Validate the string input argument (from the AML caller) */ + + string_desc = walk_state->arguments[0].object; + if (!string_desc || (string_desc->common.type != ACPI_TYPE_STRING)) { + return_ACPI_STATUS(AE_TYPE); + } + + /* Create a return object */ + + return_desc = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER); + if (!return_desc) { + return_ACPI_STATUS(AE_NO_MEMORY); + } + + /* Default return value is 0, NOT SUPPORTED */ + + return_value = 0; + (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); + + /* Lookup the interface in the global _OSI list */ + + interface_info = acpi_ut_get_interface(string_desc->string.pointer); + if (interface_info && !(interface_info->flags & ACPI_OSI_INVALID)) { + /* + * The interface is supported. + * Update the osi_data if necessary. We keep track of the latest + * version of Windows that has been requested by the BIOS. + */ + if (interface_info->value > acpi_gbl_osi_data) { + acpi_gbl_osi_data = interface_info->value; + } + + return_value = ACPI_UINT32_MAX; + } + + acpi_os_release_mutex(acpi_gbl_osi_mutex); + + /* + * Invoke an optional _OSI interface handler. The host OS may wish + * to do some interface-specific handling. For example, warn about + * certain interfaces or override the true/false support value. + */ + interface_handler = acpi_gbl_interface_handler; + if (interface_handler) { + return_value = + interface_handler(string_desc->string.pointer, + return_value); + } + + ACPI_DEBUG_PRINT_RAW((ACPI_DB_INFO, + "ACPI: BIOS _OSI(\"%s\") is %ssupported\n", + string_desc->string.pointer, + return_value == 0 ? "not " : "")); + + /* Complete the return object */ + + return_desc->integer.value = return_value; + walk_state->return_desc = return_desc; + return_ACPI_STATUS(AE_OK); +} diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c index 7f8cefcb2b32..1f484c9a6888 100644 --- a/drivers/acpi/acpica/utxface.c +++ b/drivers/acpi/acpica/utxface.c @@ -110,6 +110,15 @@ acpi_status __init acpi_initialize_subsystem(void) return_ACPI_STATUS(status); } + /* Initialize the global OSI interfaces list with the static names */ + + status = acpi_ut_initialize_interfaces(); + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "During OSI interfaces initialization")); + return_ACPI_STATUS(status); + } + /* If configured, initialize the AML debugger */ ACPI_DEBUGGER_EXEC(status = acpi_db_initialize()); @@ -290,19 +299,6 @@ acpi_status acpi_initialize_objects(u32 flags) } /* - * Complete the GPE initialization for the GPE blocks defined in the FADT - * (GPE block 0 and 1). - * - * NOTE: Currently, there seems to be no need to run the _REG methods - * before enabling the GPEs. - */ - if (!(flags & ACPI_NO_EVENT_INIT)) { - status = acpi_ev_install_fadt_gpes(); - if (ACPI_FAILURE(status)) - return (status); - } - - /* * Empty the caches (delete the cached objects) on the assumption that * the table load filled them up more than they will be at runtime -- * thus wasting non-paged memory. @@ -506,6 +502,7 @@ acpi_install_initialization_handler(acpi_init_handler handler, u32 function) ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler) #endif /* ACPI_FUTURE_USAGE */ + /***************************************************************************** * * FUNCTION: acpi_purge_cached_objects @@ -529,4 +526,117 @@ acpi_status acpi_purge_cached_objects(void) } ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects) -#endif + +/***************************************************************************** + * + * FUNCTION: acpi_install_interface + * + * PARAMETERS: interface_name - The interface to install + * + * RETURN: Status + * + * DESCRIPTION: Install an _OSI interface to the global list + * + ****************************************************************************/ +acpi_status acpi_install_interface(acpi_string interface_name) +{ + acpi_status status; + struct acpi_interface_info *interface_info; + + /* Parameter validation */ + + if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) { + return (AE_BAD_PARAMETER); + } + + (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); + + /* Check if the interface name is already in the global list */ + + interface_info = acpi_ut_get_interface(interface_name); + if (interface_info) { + /* + * The interface already exists in the list. This is OK if the + * interface has been marked invalid -- just clear the bit. + */ + if (interface_info->flags & ACPI_OSI_INVALID) { + interface_info->flags &= ~ACPI_OSI_INVALID; + status = AE_OK; + } else { + status = AE_ALREADY_EXISTS; + } + } else { + /* New interface name, install into the global list */ + + status = acpi_ut_install_interface(interface_name); + } + + acpi_os_release_mutex(acpi_gbl_osi_mutex); + return (status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_interface) + +/***************************************************************************** + * + * FUNCTION: acpi_remove_interface + * + * PARAMETERS: interface_name - The interface to remove + * + * RETURN: Status + * + * DESCRIPTION: Remove an _OSI interface from the global list + * + ****************************************************************************/ +acpi_status acpi_remove_interface(acpi_string interface_name) +{ + acpi_status status; + + /* Parameter validation */ + + if (!interface_name || (ACPI_STRLEN(interface_name) == 0)) { + return (AE_BAD_PARAMETER); + } + + (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); + + status = acpi_ut_remove_interface(interface_name); + + acpi_os_release_mutex(acpi_gbl_osi_mutex); + return (status); +} + +ACPI_EXPORT_SYMBOL(acpi_remove_interface) + +/***************************************************************************** + * + * FUNCTION: acpi_install_interface_handler + * + * PARAMETERS: Handler - The _OSI interface handler to install + * NULL means "remove existing handler" + * + * RETURN: Status + * + * DESCRIPTION: Install a handler for the predefined _OSI ACPI method. + * invoked during execution of the internal implementation of + * _OSI. A NULL handler simply removes any existing handler. + * + ****************************************************************************/ +acpi_status acpi_install_interface_handler(acpi_interface_handler handler) +{ + acpi_status status = AE_OK; + + (void)acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER); + + if (handler && acpi_gbl_interface_handler) { + status = AE_ALREADY_EXISTS; + } else { + acpi_gbl_interface_handler = handler; + } + + acpi_os_release_mutex(acpi_gbl_osi_mutex); + return (status); +} + +ACPI_EXPORT_SYMBOL(acpi_install_interface_handler) +#endif /* !ACPI_ASL_COMPILER */ diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c new file mode 100644 index 000000000000..6f12e314fbae --- /dev/null +++ b/drivers/acpi/acpica/utxferror.c @@ -0,0 +1,415 @@ +/******************************************************************************* + * + * Module Name: utxferror - Various error/warning output functions + * + ******************************************************************************/ + +/* + * Copyright (C) 2000 - 2010, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acnamesp.h" + +#define _COMPONENT ACPI_UTILITIES +ACPI_MODULE_NAME("utxferror") + +/* + * This module is used for the in-kernel ACPICA as well as the ACPICA + * tools/applications. + * + * For the i_aSL compiler case, the output is redirected to stderr so that + * any of the various ACPI errors and warnings do not appear in the output + * files, for either the compiler or disassembler portions of the tool. + */ +#ifdef ACPI_ASL_COMPILER +#include <stdio.h> +extern FILE *acpi_gbl_output_file; + +#define ACPI_MSG_REDIRECT_BEGIN \ + FILE *output_file = acpi_gbl_output_file; \ + acpi_os_redirect_output (stderr); + +#define ACPI_MSG_REDIRECT_END \ + acpi_os_redirect_output (output_file); + +#else +/* + * non-i_aSL case - no redirection, nothing to do + */ +#define ACPI_MSG_REDIRECT_BEGIN +#define ACPI_MSG_REDIRECT_END +#endif +/* + * Common message prefixes + */ +#define ACPI_MSG_ERROR "ACPI Error: " +#define ACPI_MSG_EXCEPTION "ACPI Exception: " +#define ACPI_MSG_WARNING "ACPI Warning: " +#define ACPI_MSG_INFO "ACPI: " +/* + * Common message suffix + */ +#define ACPI_MSG_SUFFIX \ + acpi_os_printf (" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number) +/******************************************************************************* + * + * FUNCTION: acpi_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * Format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Print "ACPI Error" message with module/line/version info + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_error(const char *module_name, u32 line_number, const char *format, ...) +{ + va_list arg_list; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_ERROR); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); + + ACPI_MSG_REDIRECT_END; +} + +ACPI_EXPORT_SYMBOL(acpi_error) + +/******************************************************************************* + * + * FUNCTION: acpi_exception + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * Status - Status to be formatted + * Format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Print "ACPI Exception" message with module/line/version info + * and decoded acpi_status. + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_exception(const char *module_name, + u32 line_number, acpi_status status, const char *format, ...) +{ + va_list arg_list; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_EXCEPTION "%s, ", + acpi_format_exception(status)); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); + + ACPI_MSG_REDIRECT_END; +} + +ACPI_EXPORT_SYMBOL(acpi_exception) + +/******************************************************************************* + * + * FUNCTION: acpi_warning + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * Format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Print "ACPI Warning" message with module/line/version info + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_warning(const char *module_name, u32 line_number, const char *format, ...) +{ + va_list arg_list; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_WARNING); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); + + ACPI_MSG_REDIRECT_END; +} + +ACPI_EXPORT_SYMBOL(acpi_warning) + +/******************************************************************************* + * + * FUNCTION: acpi_info + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * Format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Print generic "ACPI:" information message. There is no + * module/line/version info in order to keep the message simple. + * + * TBD: module_name and line_number args are not needed, should be removed. + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_info(const char *module_name, u32 line_number, const char *format, ...) +{ + va_list arg_list; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_INFO); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + acpi_os_printf("\n"); + va_end(arg_list); + + ACPI_MSG_REDIRECT_END; +} + +ACPI_EXPORT_SYMBOL(acpi_info) + +/* + * The remainder of this module contains internal error functions that may + * be configured out. + */ +#if !defined (ACPI_NO_ERROR_MESSAGES) && !defined (ACPI_BIN_APP) +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_warning + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * Pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * Format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Warnings for the predefined validation module. Messages are + * only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of error + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_warning(const char *module_name, + u32 line_number, + char *pathname, + u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_WARNING "For %s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_predefined_info + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * Pathname - Full pathname to the node + * node_flags - From Namespace node for the method/object + * Format - Printf format string + additional args + * + * RETURN: None + * + * DESCRIPTION: Info messages for the predefined validation module. Messages + * are only emitted the first time a problem with a particular + * method/object is detected. This prevents a flood of + * messages for methods that are repeatedly evaluated. + * + ******************************************************************************/ + +void ACPI_INTERNAL_VAR_XFACE +acpi_ut_predefined_info(const char *module_name, + u32 line_number, + char *pathname, u8 node_flags, const char *format, ...) +{ + va_list arg_list; + + /* + * Warning messages for this method/object will be disabled after the + * first time a validation fails or an object is successfully repaired. + */ + if (node_flags & ANOBJ_EVALUATED) { + return; + } + + acpi_os_printf(ACPI_MSG_INFO "For %s: ", pathname); + + va_start(arg_list, format); + acpi_os_vprintf(format, arg_list); + ACPI_MSG_SUFFIX; + va_end(arg_list); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_namespace_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * internal_name - Name or path of the namespace node + * lookup_status - Exception code from NS lookup + * + * RETURN: None + * + * DESCRIPTION: Print error message with the full pathname for the NS node. + * + ******************************************************************************/ + +void +acpi_ut_namespace_error(const char *module_name, + u32 line_number, + const char *internal_name, acpi_status lookup_status) +{ + acpi_status status; + u32 bad_name; + char *name = NULL; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_ERROR); + + if (lookup_status == AE_BAD_CHARACTER) { + + /* There is a non-ascii character in the name */ + + ACPI_MOVE_32_TO_32(&bad_name, + ACPI_CAST_PTR(u32, internal_name)); + acpi_os_printf("[0x%4.4X] (NON-ASCII)", bad_name); + } else { + /* Convert path to external format */ + + status = acpi_ns_externalize_name(ACPI_UINT32_MAX, + internal_name, NULL, &name); + + /* Print target name */ + + if (ACPI_SUCCESS(status)) { + acpi_os_printf("[%s]", name); + } else { + acpi_os_printf("[COULD NOT EXTERNALIZE NAME]"); + } + + if (name) { + ACPI_FREE(name); + } + } + + acpi_os_printf(" Namespace lookup failure, %s", + acpi_format_exception(lookup_status)); + + ACPI_MSG_SUFFIX; + ACPI_MSG_REDIRECT_END; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ut_method_error + * + * PARAMETERS: module_name - Caller's module name (for error output) + * line_number - Caller's line number (for error output) + * Message - Error message to use on failure + * prefix_node - Prefix relative to the path + * Path - Path to the node (optional) + * method_status - Execution status + * + * RETURN: None + * + * DESCRIPTION: Print error message with the full pathname for the method. + * + ******************************************************************************/ + +void +acpi_ut_method_error(const char *module_name, + u32 line_number, + const char *message, + struct acpi_namespace_node *prefix_node, + const char *path, acpi_status method_status) +{ + acpi_status status; + struct acpi_namespace_node *node = prefix_node; + + ACPI_MSG_REDIRECT_BEGIN; + acpi_os_printf(ACPI_MSG_ERROR); + + if (path) { + status = + acpi_ns_get_node(prefix_node, path, ACPI_NS_NO_UPSEARCH, + &node); + if (ACPI_FAILURE(status)) { + acpi_os_printf("[Could not get node by pathname]"); + } + } + + acpi_ns_print_node_pathname(node, message); + acpi_os_printf(", %s", acpi_format_exception(method_status)); + + ACPI_MSG_SUFFIX; + ACPI_MSG_REDIRECT_END; +} + +#endif /* ACPI_NO_ERROR_MESSAGES */ diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig index 907e350f1c7d..fca34ccfd294 100644 --- a/drivers/acpi/apei/Kconfig +++ b/drivers/acpi/apei/Kconfig @@ -34,6 +34,6 @@ config ACPI_APEI_ERST_DEBUG depends on ACPI_APEI help ERST is a way provided by APEI to save and retrieve hardware - error infomation to and from a persistent store. Enable this + error information to and from a persistent store. Enable this if you want to debugging and testing the ERST kernel support and firmware implementation. diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 73fd0c7487c1..4a904a4bf05f 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -445,11 +445,15 @@ EXPORT_SYMBOL_GPL(apei_resources_sub); int apei_resources_request(struct apei_resources *resources, const char *desc) { - struct apei_res *res, *res_bak; + struct apei_res *res, *res_bak = NULL; struct resource *r; + int rc; - apei_resources_sub(resources, &apei_resources_all); + rc = apei_resources_sub(resources, &apei_resources_all); + if (rc) + return rc; + rc = -EINVAL; list_for_each_entry(res, &resources->iomem, list) { r = request_mem_region(res->start, res->end - res->start, desc); @@ -475,7 +479,11 @@ int apei_resources_request(struct apei_resources *resources, } } - apei_resources_merge(&apei_resources_all, resources); + rc = apei_resources_merge(&apei_resources_all, resources); + if (rc) { + pr_err(APEI_PFX "Fail to merge resources!\n"); + goto err_unmap_ioport; + } return 0; err_unmap_ioport: @@ -491,12 +499,13 @@ err_unmap_iomem: break; release_mem_region(res->start, res->end - res->start); } - return -EINVAL; + return rc; } EXPORT_SYMBOL_GPL(apei_resources_request); void apei_resources_release(struct apei_resources *resources) { + int rc; struct apei_res *res; list_for_each_entry(res, &resources->iomem, list) @@ -504,7 +513,9 @@ void apei_resources_release(struct apei_resources *resources) list_for_each_entry(res, &resources->ioport, list) release_region(res->start, res->end - res->start); - apei_resources_sub(&apei_resources_all, resources); + rc = apei_resources_sub(&apei_resources_all, resources); + if (rc) + pr_err(APEI_PFX "Fail to sub resources!\n"); } EXPORT_SYMBOL_GPL(apei_resources_release); diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 465c885938ee..cf29df69380b 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -426,7 +426,9 @@ DEFINE_SIMPLE_ATTRIBUTE(error_inject_fops, NULL, static int einj_check_table(struct acpi_table_einj *einj_tab) { - if (einj_tab->header_length != sizeof(struct acpi_table_einj)) + if ((einj_tab->header_length != + (sizeof(struct acpi_table_einj) - sizeof(einj_tab->header))) + && (einj_tab->header_length != sizeof(struct acpi_table_einj))) return -EINVAL; if (einj_tab->header.length < sizeof(struct acpi_table_einj)) return -EINVAL; diff --git a/drivers/acpi/apei/erst-dbg.c b/drivers/acpi/apei/erst-dbg.c index 5281ddda2777..da1228a9a544 100644 --- a/drivers/acpi/apei/erst-dbg.c +++ b/drivers/acpi/apei/erst-dbg.c @@ -2,7 +2,7 @@ * APEI Error Record Serialization Table debug support * * ERST is a way provided by APEI to save and retrieve hardware error - * infomation to and from a persistent store. This file provide the + * information to and from a persistent store. This file provide the * debugging/testing support for ERST kernel support and firmware * implementation. * @@ -111,11 +111,13 @@ retry: goto out; } if (len > erst_dbg_buf_len) { - kfree(erst_dbg_buf); + void *p; rc = -ENOMEM; - erst_dbg_buf = kmalloc(len, GFP_KERNEL); - if (!erst_dbg_buf) + p = kmalloc(len, GFP_KERNEL); + if (!p) goto out; + kfree(erst_dbg_buf); + erst_dbg_buf = p; erst_dbg_buf_len = len; goto retry; } @@ -150,11 +152,13 @@ static ssize_t erst_dbg_write(struct file *filp, const char __user *ubuf, if (mutex_lock_interruptible(&erst_dbg_mutex)) return -EINTR; if (usize > erst_dbg_buf_len) { - kfree(erst_dbg_buf); + void *p; rc = -ENOMEM; - erst_dbg_buf = kmalloc(usize, GFP_KERNEL); - if (!erst_dbg_buf) + p = kmalloc(usize, GFP_KERNEL); + if (!p) goto out; + kfree(erst_dbg_buf); + erst_dbg_buf = p; erst_dbg_buf_len = usize; } rc = copy_from_user(erst_dbg_buf, ubuf, usize); diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 18645f4e83cd..1211c03149e8 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -2,7 +2,7 @@ * APEI Error Record Serialization Table support * * ERST is a way provided by APEI to save and retrieve hardware error - * infomation to and from a persistent store. + * information to and from a persistent store. * * For more information about ERST, please refer to ACPI Specification * version 4.0, section 17.4. @@ -266,13 +266,30 @@ static int erst_exec_move_data(struct apei_exec_context *ctx, { int rc; u64 offset; + void *src, *dst; + + /* ioremap does not work in interrupt context */ + if (in_interrupt()) { + pr_warning(ERST_PFX + "MOVE_DATA can not be used in interrupt context"); + return -EBUSY; + } rc = __apei_exec_read_register(entry, &offset); if (rc) return rc; - memmove((void *)ctx->dst_base + offset, - (void *)ctx->src_base + offset, - ctx->var2); + + src = ioremap(ctx->src_base + offset, ctx->var2); + if (!src) + return -ENOMEM; + dst = ioremap(ctx->dst_base + offset, ctx->var2); + if (!dst) + return -ENOMEM; + + memmove(dst, src, ctx->var2); + + iounmap(src); + iounmap(dst); return 0; } @@ -750,7 +767,9 @@ __setup("erst_disable", setup_erst_disable); static int erst_check_table(struct acpi_table_erst *erst_tab) { - if (erst_tab->header_length != sizeof(struct acpi_table_erst)) + if ((erst_tab->header_length != + (sizeof(struct acpi_table_erst) - sizeof(erst_tab->header))) + && (erst_tab->header_length != sizeof(struct acpi_table_einj))) return -EINVAL; if (erst_tab->header.length < sizeof(struct acpi_table_erst)) return -EINVAL; diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 385a6059714a..0d505e59214d 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -302,7 +302,7 @@ static int __devinit ghes_probe(struct platform_device *ghes_dev) struct ghes *ghes = NULL; int rc = -EINVAL; - generic = ghes_dev->dev.platform_data; + generic = *(struct acpi_hest_generic **)ghes_dev->dev.platform_data; if (!generic->enabled) return -ENODEV; diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 343168d18266..1a3508a7fe03 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -137,20 +137,23 @@ static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data) static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data) { - struct acpi_hest_generic *generic; struct platform_device *ghes_dev; struct ghes_arr *ghes_arr = data; int rc; if (hest_hdr->type != ACPI_HEST_TYPE_GENERIC_ERROR) return 0; - generic = (struct acpi_hest_generic *)hest_hdr; - if (!generic->enabled) + + if (!((struct acpi_hest_generic *)hest_hdr)->enabled) return 0; ghes_dev = platform_device_alloc("GHES", hest_hdr->source_id); if (!ghes_dev) return -ENOMEM; - ghes_dev->dev.platform_data = generic; + + rc = platform_device_add_data(ghes_dev, &hest_hdr, sizeof(void *)); + if (rc) + goto err; + rc = platform_device_add(ghes_dev); if (rc) goto err; diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c index 8f8bd736d4ff..542e53903891 100644 --- a/drivers/acpi/atomicio.c +++ b/drivers/acpi/atomicio.c @@ -142,7 +142,7 @@ static void __iomem *acpi_pre_map(phys_addr_t paddr, list_add_tail_rcu(&map->list, &acpi_iomaps); spin_unlock_irqrestore(&acpi_iomaps_lock, flags); - return vaddr + (paddr - pg_off); + return map->vaddr + (paddr - map->paddr); err_unmap: iounmap(vaddr); return NULL; diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index dc58402b0a17..95649d373071 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -42,10 +42,7 @@ #include <acpi/acpi_bus.h> #include <acpi/acpi_drivers.h> - -#ifdef CONFIG_ACPI_SYSFS_POWER #include <linux/power_supply.h> -#endif #define PREFIX "ACPI: " @@ -98,13 +95,12 @@ enum { * due to bad math. */ ACPI_BATTERY_QUIRK_SIGNED16_CURRENT, + ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, }; struct acpi_battery { struct mutex lock; -#ifdef CONFIG_ACPI_SYSFS_POWER struct power_supply bat; -#endif struct acpi_device *device; unsigned long update_time; int rate_now; @@ -141,7 +137,6 @@ inline int acpi_battery_present(struct acpi_battery *battery) return battery->device->status.battery_present; } -#ifdef CONFIG_ACPI_SYSFS_POWER static int acpi_battery_technology(struct acpi_battery *battery) { if (!strcasecmp("NiCd", battery->type)) @@ -186,6 +181,7 @@ static int acpi_battery_get_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) { + int ret = 0; struct acpi_battery *battery = to_acpi_battery(psy); if (acpi_battery_present(battery)) { @@ -214,26 +210,44 @@ static int acpi_battery_get_property(struct power_supply *psy, val->intval = battery->cycle_count; break; case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: - val->intval = battery->design_voltage * 1000; + if (battery->design_voltage == ACPI_BATTERY_VALUE_UNKNOWN) + ret = -ENODEV; + else + val->intval = battery->design_voltage * 1000; break; case POWER_SUPPLY_PROP_VOLTAGE_NOW: - val->intval = battery->voltage_now * 1000; + if (battery->voltage_now == ACPI_BATTERY_VALUE_UNKNOWN) + ret = -ENODEV; + else + val->intval = battery->voltage_now * 1000; break; case POWER_SUPPLY_PROP_CURRENT_NOW: case POWER_SUPPLY_PROP_POWER_NOW: - val->intval = battery->rate_now * 1000; + if (battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN) + ret = -ENODEV; + else + val->intval = battery->rate_now * 1000; break; case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: - val->intval = battery->design_capacity * 1000; + if (battery->design_capacity == ACPI_BATTERY_VALUE_UNKNOWN) + ret = -ENODEV; + else + val->intval = battery->design_capacity * 1000; break; case POWER_SUPPLY_PROP_CHARGE_FULL: case POWER_SUPPLY_PROP_ENERGY_FULL: - val->intval = battery->full_charge_capacity * 1000; + if (battery->full_charge_capacity == ACPI_BATTERY_VALUE_UNKNOWN) + ret = -ENODEV; + else + val->intval = battery->full_charge_capacity * 1000; break; case POWER_SUPPLY_PROP_CHARGE_NOW: case POWER_SUPPLY_PROP_ENERGY_NOW: - val->intval = battery->capacity_now * 1000; + if (battery->capacity_now == ACPI_BATTERY_VALUE_UNKNOWN) + ret = -ENODEV; + else + val->intval = battery->capacity_now * 1000; break; case POWER_SUPPLY_PROP_MODEL_NAME: val->strval = battery->model_number; @@ -245,9 +259,9 @@ static int acpi_battery_get_property(struct power_supply *psy, val->strval = battery->serial_number; break; default: - return -EINVAL; + ret = -EINVAL; } - return 0; + return ret; } static enum power_supply_property charge_battery_props[] = { @@ -273,7 +287,6 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_CYCLE_COUNT, POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, POWER_SUPPLY_PROP_VOLTAGE_NOW, - POWER_SUPPLY_PROP_CURRENT_NOW, POWER_SUPPLY_PROP_POWER_NOW, POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, POWER_SUPPLY_PROP_ENERGY_FULL, @@ -282,7 +295,6 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, POWER_SUPPLY_PROP_SERIAL_NUMBER, }; -#endif #ifdef CONFIG_ACPI_PROCFS_POWER inline char *acpi_battery_units(struct acpi_battery *battery) @@ -413,6 +425,8 @@ static int acpi_battery_get_info(struct acpi_battery *battery) result = extract_package(battery, buffer.pointer, info_offsets, ARRAY_SIZE(info_offsets)); kfree(buffer.pointer); + if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) + battery->full_charge_capacity = battery->design_capacity; return result; } @@ -449,6 +463,10 @@ static int acpi_battery_get_state(struct acpi_battery *battery) battery->rate_now != -1) battery->rate_now = abs((s16)battery->rate_now); + if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags) + && battery->capacity_now >= 0 && battery->capacity_now <= 100) + battery->capacity_now = (battery->capacity_now * + battery->full_charge_capacity) / 100; return result; } @@ -493,7 +511,6 @@ static int acpi_battery_init_alarm(struct acpi_battery *battery) return acpi_battery_set_alarm(battery); } -#ifdef CONFIG_ACPI_SYSFS_POWER static ssize_t acpi_battery_alarm_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -553,7 +570,6 @@ static void sysfs_remove_battery(struct acpi_battery *battery) power_supply_unregister(&battery->bat); battery->bat.dev = NULL; } -#endif static void acpi_battery_quirks(struct acpi_battery *battery) { @@ -562,6 +578,33 @@ static void acpi_battery_quirks(struct acpi_battery *battery) } } +/* + * According to the ACPI spec, some kinds of primary batteries can + * report percentage battery remaining capacity directly to OS. + * In this case, it reports the Last Full Charged Capacity == 100 + * and BatteryPresentRate == 0xFFFFFFFF. + * + * Now we found some battery reports percentage remaining capacity + * even if it's rechargeable. + * https://bugzilla.kernel.org/show_bug.cgi?id=15979 + * + * Handle this correctly so that they won't break userspace. + */ +static void acpi_battery_quirks2(struct acpi_battery *battery) +{ + if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)) + return ; + + if (battery->full_charge_capacity == 100 && + battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN && + battery->capacity_now >=0 && battery->capacity_now <= 100) { + set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags); + battery->full_charge_capacity = battery->design_capacity; + battery->capacity_now = (battery->capacity_now * + battery->full_charge_capacity) / 100; + } +} + static int acpi_battery_update(struct acpi_battery *battery) { int result, old_present = acpi_battery_present(battery); @@ -569,9 +612,7 @@ static int acpi_battery_update(struct acpi_battery *battery) if (result) return result; if (!acpi_battery_present(battery)) { -#ifdef CONFIG_ACPI_SYSFS_POWER sysfs_remove_battery(battery); -#endif battery->update_time = 0; return 0; } @@ -583,11 +624,11 @@ static int acpi_battery_update(struct acpi_battery *battery) acpi_battery_quirks(battery); acpi_battery_init_alarm(battery); } -#ifdef CONFIG_ACPI_SYSFS_POWER if (!battery->bat.dev) sysfs_add_battery(battery); -#endif - return acpi_battery_get_state(battery); + result = acpi_battery_get_state(battery); + acpi_battery_quirks2(battery); + return result; } /* -------------------------------------------------------------------------- @@ -868,26 +909,20 @@ static void acpi_battery_remove_fs(struct acpi_device *device) static void acpi_battery_notify(struct acpi_device *device, u32 event) { struct acpi_battery *battery = acpi_driver_data(device); -#ifdef CONFIG_ACPI_SYSFS_POWER struct device *old; -#endif if (!battery) return; -#ifdef CONFIG_ACPI_SYSFS_POWER old = battery->bat.dev; -#endif acpi_battery_update(battery); acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); acpi_bus_generate_netlink_event(device->pnp.device_class, dev_name(&device->dev), event, acpi_battery_present(battery)); -#ifdef CONFIG_ACPI_SYSFS_POWER /* acpi_battery_update could remove power_supply object */ if (old && battery->bat.dev) power_supply_changed(&battery->bat); -#endif } static int acpi_battery_add(struct acpi_device *device) @@ -935,9 +970,7 @@ static int acpi_battery_remove(struct acpi_device *device, int type) #ifdef CONFIG_ACPI_PROCFS_POWER acpi_battery_remove_fs(device); #endif -#ifdef CONFIG_ACPI_SYSFS_POWER sysfs_remove_battery(battery); -#endif mutex_destroy(&battery->lock); kfree(battery); return 0; diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 2bb28b9d91c4..af308d03f492 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -183,6 +183,8 @@ static int __init dmi_disable_osi_vista(const struct dmi_system_id *d) { printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident); acpi_osi_setup("!Windows 2006"); + acpi_osi_setup("!Windows 2006 SP1"); + acpi_osi_setup("!Windows 2006 SP2"); return 0; } static int __init dmi_disable_osi_win7(const struct dmi_system_id *d) @@ -202,6 +204,23 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, }, { + /* + * There have a NVIF method in MSI GX723 DSDT need call by Nvidia + * driver (e.g. nouveau) when user press brightness hotkey. + * Currently, nouveau driver didn't do the job and it causes there + * have a infinite while loop in DSDT when user press hotkey. + * We add MSI GX723's dmi information to this table for workaround + * this issue. + * Will remove MSI GX723 from the table after nouveau grows support. + */ + .callback = dmi_disable_osi_vista, + .ident = "MSI GX723", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX723"), + }, + }, + { .callback = dmi_disable_osi_vista, .ident = "Sony VGN-NS10J_S", .matches = { @@ -226,6 +245,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, }, { + .callback = dmi_disable_osi_vista, + .ident = "Toshiba Satellite L355", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Satellite L355"), + }, + }, + { .callback = dmi_disable_osi_win7, .ident = "ASUS K50IJ", .matches = { @@ -233,6 +260,14 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_NAME, "K50IJ"), }, }, + { + .callback = dmi_disable_osi_vista, + .ident = "Toshiba P305D", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P305D"), + }, + }, /* * BIOS invocation of _OSI(Linux) is almost always a BIOS bug. diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 5c221ab535d5..310e3b9749cb 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -55,7 +55,7 @@ EXPORT_SYMBOL(acpi_root_dir); static int set_power_nocheck(const struct dmi_system_id *id) { printk(KERN_NOTICE PREFIX "%s detected - " - "disable power check in power transistion\n", id->ident); + "disable power check in power transition\n", id->ident); acpi_power_nocheck = 1; return 0; } @@ -80,23 +80,15 @@ static int set_copy_dsdt(const struct dmi_system_id *id) static struct dmi_system_id dsdt_dmi_table[] __initdata = { /* - * Insyde BIOS on some TOSHIBA machines corrupt the DSDT. + * Invoke DSDT corruption work-around on all Toshiba Satellite. * https://bugzilla.kernel.org/show_bug.cgi?id=14679 */ { .callback = set_copy_dsdt, - .ident = "TOSHIBA Satellite A505", + .ident = "TOSHIBA Satellite", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "Satellite A505"), - }, - }, - { - .callback = set_copy_dsdt, - .ident = "TOSHIBA Satellite L505D", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), - DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L505D"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite"), }, }, {} @@ -1027,7 +1019,7 @@ static int __init acpi_init(void) /* * If the laptop falls into the DMI check table, the power state check - * will be disabled in the course of device power transistion. + * will be disabled in the course of device power transition. */ dmi_check_system(power_nocheck_dmi_table); diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index 1575a9b51f1d..71ef9cd0735f 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -338,7 +338,8 @@ static int acpi_button_add(struct acpi_device *device) { struct acpi_button *button; struct input_dev *input; - char *hid, *name, *class; + const char *hid = acpi_device_hid(device); + char *name, *class; int error; button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL); @@ -353,7 +354,6 @@ static int acpi_button_add(struct acpi_device *device) goto err_free_button; } - hid = acpi_device_hid(device); name = acpi_device_name(device); class = acpi_device_class(device); diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 3fe29e992be8..44f99bd83741 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -725,6 +725,7 @@ static void dock_notify(acpi_handle handle, u32 event, void *data) complete_dock(ds); dock_event(ds, event, DOCK_EVENT); dock_lock(ds, 1); + acpi_update_gpes(); break; } if (dock_present(ds) || dock_in_progress(ds)) diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 8a3b840c0bb2..60049080c869 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -27,8 +27,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/types.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> #include <asm/uaccess.h> #include <linux/thermal.h> #include <acpi/acpi_bus.h> @@ -119,122 +117,6 @@ static struct thermal_cooling_device_ops fan_cooling_ops = { }; /* -------------------------------------------------------------------------- - FS Interface (/proc) - -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_PROCFS - -static struct proc_dir_entry *acpi_fan_dir; - -static int acpi_fan_read_state(struct seq_file *seq, void *offset) -{ - struct acpi_device *device = seq->private; - int state = 0; - - - if (device) { - if (acpi_bus_get_power(device->handle, &state)) - seq_printf(seq, "status: ERROR\n"); - else - seq_printf(seq, "status: %s\n", - !state ? "on" : "off"); - } - return 0; -} - -static int acpi_fan_state_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_fan_read_state, PDE(inode)->data); -} - -static ssize_t -acpi_fan_write_state(struct file *file, const char __user * buffer, - size_t count, loff_t * ppos) -{ - int result = 0; - struct seq_file *m = file->private_data; - struct acpi_device *device = m->private; - char state_string[3] = { '\0' }; - - if (count > sizeof(state_string) - 1) - return -EINVAL; - - if (copy_from_user(state_string, buffer, count)) - return -EFAULT; - - state_string[count] = '\0'; - if ((state_string[0] < '0') || (state_string[0] > '3')) - return -EINVAL; - if (state_string[1] == '\n') - state_string[1] = '\0'; - if (state_string[1] != '\0') - return -EINVAL; - - result = acpi_bus_set_power(device->handle, - simple_strtoul(state_string, NULL, 0)); - if (result) - return result; - - return count; -} - -static const struct file_operations acpi_fan_state_ops = { - .open = acpi_fan_state_open_fs, - .read = seq_read, - .write = acpi_fan_write_state, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int acpi_fan_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *entry = NULL; - - - if (!device) - return -EINVAL; - - if (!acpi_device_dir(device)) { - acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), - acpi_fan_dir); - if (!acpi_device_dir(device)) - return -ENODEV; - } - - /* 'status' [R/W] */ - entry = proc_create_data(ACPI_FAN_FILE_STATE, - S_IFREG | S_IRUGO | S_IWUSR, - acpi_device_dir(device), - &acpi_fan_state_ops, - device); - if (!entry) - return -ENODEV; - return 0; -} - -static int acpi_fan_remove_fs(struct acpi_device *device) -{ - - if (acpi_device_dir(device)) { - remove_proc_entry(ACPI_FAN_FILE_STATE, acpi_device_dir(device)); - remove_proc_entry(acpi_device_bid(device), acpi_fan_dir); - acpi_device_dir(device) = NULL; - } - - return 0; -} -#else -static int acpi_fan_add_fs(struct acpi_device *device) -{ - return 0; -} - -static int acpi_fan_remove_fs(struct acpi_device *device) -{ - return 0; -} -#endif -/* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ @@ -284,10 +166,6 @@ static int acpi_fan_add(struct acpi_device *device) dev_err(&device->dev, "Failed to create sysfs link " "'device'\n"); - result = acpi_fan_add_fs(device); - if (result) - goto end; - printk(KERN_INFO PREFIX "%s [%s] (%s)\n", acpi_device_name(device), acpi_device_bid(device), !device->power.state ? "on" : "off"); @@ -303,7 +181,6 @@ static int acpi_fan_remove(struct acpi_device *device, int type) if (!device || !cdev) return -EINVAL; - acpi_fan_remove_fs(device); sysfs_remove_link(&device->dev.kobj, "thermal_cooling"); sysfs_remove_link(&cdev->device.kobj, "device"); thermal_cooling_device_unregister(cdev); @@ -347,19 +224,9 @@ static int __init acpi_fan_init(void) { int result = 0; -#ifdef CONFIG_ACPI_PROCFS - acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir); - if (!acpi_fan_dir) - return -ENODEV; -#endif - result = acpi_bus_register_driver(&acpi_fan_driver); - if (result < 0) { -#ifdef CONFIG_ACPI_PROCFS - remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir); -#endif + if (result < 0) return -ENODEV; - } return 0; } @@ -369,8 +236,6 @@ static void __exit acpi_fan_exit(void) acpi_bus_unregister_driver(&acpi_fan_driver); - remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir); - return; } diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 65b25a303b86..d3bed219c442 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -96,7 +96,9 @@ static LIST_HEAD(resource_list_head); static DEFINE_SPINLOCK(acpi_res_lock); #define OSI_STRING_LENGTH_MAX 64 /* arbitrary */ -static char osi_additional_string[OSI_STRING_LENGTH_MAX]; +static char osi_setup_string[OSI_STRING_LENGTH_MAX]; + +static void __init acpi_osi_setup_late(void); /* * The story of _OSI(Linux) @@ -138,6 +140,20 @@ static struct osi_linux { unsigned int known:1; } osi_linux = { 0, 0, 0, 0}; +static u32 acpi_osi_handler(acpi_string interface, u32 supported) +{ + if (!strcmp("Linux", interface)) { + + printk(KERN_NOTICE FW_BUG PREFIX + "BIOS _OSI(Linux) query %s%s\n", + osi_linux.enable ? "honored" : "ignored", + osi_linux.cmdline ? " via cmdline" : + osi_linux.dmi ? " via DMI" : ""); + } + + return supported; +} + static void __init acpi_request_region (struct acpi_generic_address *addr, unsigned int length, char *desc) { @@ -198,6 +214,8 @@ acpi_status acpi_os_initialize1(void) BUG_ON(!kacpid_wq); BUG_ON(!kacpi_notify_wq); BUG_ON(!kacpi_hotplug_wq); + acpi_install_interface_handler(acpi_osi_handler); + acpi_osi_setup_late(); return AE_OK; } @@ -547,9 +565,10 @@ acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width) acpi_status acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg, - u32 *value, u32 width) + u64 *value, u32 width) { int result, size; + u32 value32; if (!value) return AE_BAD_PARAMETER; @@ -570,7 +589,8 @@ acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg, result = raw_pci_read(pci_id->segment, pci_id->bus, PCI_DEVFN(pci_id->device, pci_id->function), - reg, size, value); + reg, size, &value32); + *value = value32; return (result ? AE_ERROR : AE_OK); } @@ -602,74 +622,6 @@ acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg, return (result ? AE_ERROR : AE_OK); } -/* TODO: Change code to take advantage of driver model more */ -static void acpi_os_derive_pci_id_2(acpi_handle rhandle, /* upper bound */ - acpi_handle chandle, /* current node */ - struct acpi_pci_id **id, - int *is_bridge, u8 * bus_number) -{ - acpi_handle handle; - struct acpi_pci_id *pci_id = *id; - acpi_status status; - unsigned long long temp; - acpi_object_type type; - - acpi_get_parent(chandle, &handle); - if (handle != rhandle) { - acpi_os_derive_pci_id_2(rhandle, handle, &pci_id, is_bridge, - bus_number); - - status = acpi_get_type(handle, &type); - if ((ACPI_FAILURE(status)) || (type != ACPI_TYPE_DEVICE)) - return; - - status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, - &temp); - if (ACPI_SUCCESS(status)) { - u32 val; - pci_id->device = ACPI_HIWORD(ACPI_LODWORD(temp)); - pci_id->function = ACPI_LOWORD(ACPI_LODWORD(temp)); - - if (*is_bridge) - pci_id->bus = *bus_number; - - /* any nicer way to get bus number of bridge ? */ - status = - acpi_os_read_pci_configuration(pci_id, 0x0e, &val, - 8); - if (ACPI_SUCCESS(status) - && ((val & 0x7f) == 1 || (val & 0x7f) == 2)) { - status = - acpi_os_read_pci_configuration(pci_id, 0x18, - &val, 8); - if (!ACPI_SUCCESS(status)) { - /* Certainly broken... FIX ME */ - return; - } - *is_bridge = 1; - pci_id->bus = val; - status = - acpi_os_read_pci_configuration(pci_id, 0x19, - &val, 8); - if (ACPI_SUCCESS(status)) { - *bus_number = val; - } - } else - *is_bridge = 0; - } - } -} - -void acpi_os_derive_pci_id(acpi_handle rhandle, /* upper bound */ - acpi_handle chandle, /* current node */ - struct acpi_pci_id **id) -{ - int is_bridge = 1; - u8 bus_number = (*id)->bus; - - acpi_os_derive_pci_id_2(rhandle, chandle, id, &is_bridge, &bus_number); -} - static void acpi_os_execute_deferred(struct work_struct *work) { struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work); @@ -977,6 +929,12 @@ static void __init set_osi_linux(unsigned int enable) printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n", enable ? "Add": "Delet"); } + + if (osi_linux.enable) + acpi_osi_setup("Linux"); + else + acpi_osi_setup("!Linux"); + return; } @@ -1011,21 +969,33 @@ void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d) * string starting with '!' disables that string * otherwise string is added to list, augmenting built-in strings */ -int __init acpi_osi_setup(char *str) +static void __init acpi_osi_setup_late(void) { - if (str == NULL || *str == '\0') { - printk(KERN_INFO PREFIX "_OSI method disabled\n"); - acpi_gbl_create_osi_method = FALSE; - } else if (!strcmp("!Linux", str)) { + char *str = osi_setup_string; + + if (*str == '\0') + return; + + if (!strcmp("!Linux", str)) { acpi_cmdline_osi_linux(0); /* !enable */ } else if (*str == '!') { - if (acpi_osi_invalidate(++str) == AE_OK) + if (acpi_remove_interface(++str) == AE_OK) printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str); } else if (!strcmp("Linux", str)) { acpi_cmdline_osi_linux(1); /* enable */ - } else if (*osi_additional_string == '\0') { - strncpy(osi_additional_string, str, OSI_STRING_LENGTH_MAX); - printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str); + } else { + if (acpi_install_interface(str) == AE_OK) + printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str); + } +} + +int __init acpi_osi_setup(char *str) +{ + if (str == NULL || *str == '\0') { + printk(KERN_INFO PREFIX "_OSI method disabled\n"); + acpi_gbl_create_osi_method = FALSE; + } else { + strncpy(osi_setup_string, str, OSI_STRING_LENGTH_MAX); } return 1; @@ -1282,38 +1252,6 @@ acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object) return (AE_OK); } -/****************************************************************************** - * - * FUNCTION: acpi_os_validate_interface - * - * PARAMETERS: interface - Requested interface to be validated - * - * RETURN: AE_OK if interface is supported, AE_SUPPORT otherwise - * - * DESCRIPTION: Match an interface string to the interfaces supported by the - * host. Strings originate from an AML call to the _OSI method. - * - *****************************************************************************/ - -acpi_status -acpi_os_validate_interface (char *interface) -{ - if (!strncmp(osi_additional_string, interface, OSI_STRING_LENGTH_MAX)) - return AE_OK; - if (!strcmp("Linux", interface)) { - - printk(KERN_NOTICE PREFIX - "BIOS _OSI(Linux) query %s%s\n", - osi_linux.enable ? "honored" : "ignored", - osi_linux.cmdline ? " via cmdline" : - osi_linux.dmi ? " via DMI" : ""); - - if (osi_linux.enable) - return AE_OK; - } - return AE_SUPPORT; -} - static inline int acpi_res_list_add(struct acpi_res_list *res) { struct acpi_res_list *res_list_elem; diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index e4804fb05e23..f907cfbfa13c 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -32,7 +32,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/types.h> -#include <linux/proc_fs.h> #include <linux/spinlock.h> #include <linux/pm.h> #include <linux/pci.h> diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 8d47a5846aeb..9ff80a7e9f6a 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -34,7 +34,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/types.h> -#include <linux/proc_fs.h> #include <linux/spinlock.h> #include <linux/pm.h> #include <linux/pci.h> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 3ba8d1f44a73..96668ad09622 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -27,7 +27,6 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/types.h> -#include <linux/proc_fs.h> #include <linux/spinlock.h> #include <linux/pm.h> #include <linux/pm_runtime.h> diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index e9699aaed109..bec561c14beb 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -29,12 +29,6 @@ static int set_no_mwait(const struct dmi_system_id *id) static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = { { - set_no_mwait, "IFL91 board", { - DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), - DMI_MATCH(DMI_SYS_VENDOR, "ZEPTO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "3215W"), - DMI_MATCH(DMI_BOARD_NAME, "IFL91") }, NULL}, - { set_no_mwait, "Extensa 5220", { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), DMI_MATCH(DMI_SYS_VENDOR, "Acer"), @@ -352,4 +346,5 @@ void __init acpi_early_processor_set_pdc(void) acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, early_init_pdc, NULL, NULL, NULL); + acpi_get_devices("ACPI0007", early_init_pdc, NULL, NULL); } diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index 156021892389..356c320bdd08 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -40,8 +40,10 @@ #include <linux/pm.h> #include <linux/cpufreq.h> #include <linux/cpu.h> +#ifdef CONFIG_ACPI_PROCFS #include <linux/proc_fs.h> #include <linux/seq_file.h> +#endif #include <linux/dmi.h> #include <linux/moduleparam.h> #include <linux/cpuidle.h> @@ -244,6 +246,7 @@ static int acpi_processor_errata(struct acpi_processor *pr) return result; } +#ifdef CONFIG_ACPI_PROCFS static struct proc_dir_entry *acpi_processor_dir = NULL; static int __cpuinit acpi_processor_add_fs(struct acpi_device *device) @@ -280,7 +283,16 @@ static int acpi_processor_remove_fs(struct acpi_device *device) return 0; } - +#else +static inline int acpi_processor_add_fs(struct acpi_device *device) +{ + return 0; +} +static inline int acpi_processor_remove_fs(struct acpi_device *device) +{ + return 0; +} +#endif /* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ @@ -842,15 +854,17 @@ static int __init acpi_processor_init(void) memset(&errata, 0, sizeof(errata)); +#ifdef CONFIG_ACPI_PROCFS acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir); if (!acpi_processor_dir) return -ENOMEM; +#endif if (!cpuidle_register_driver(&acpi_idle_driver)) { printk(KERN_DEBUG "ACPI: %s registered with cpuidle\n", acpi_idle_driver.name); } else { - printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s", + printk(KERN_DEBUG "ACPI: acpi_idle yielding to %s\n", cpuidle_get_driver()->name); } @@ -871,7 +885,9 @@ static int __init acpi_processor_init(void) out_cpuidle: cpuidle_unregister_driver(&acpi_idle_driver); +#ifdef CONFIG_ACPI_PROCFS remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir); +#endif return result; } @@ -891,7 +907,9 @@ static void __exit acpi_processor_exit(void) cpuidle_unregister_driver(&acpi_idle_driver); +#ifdef CONFIG_ACPI_PROCFS remove_proc_entry(ACPI_PROCESSOR_CLASS, acpi_root_dir); +#endif return; } diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index ba1bd263d903..3a73a93596e8 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -447,8 +447,8 @@ int acpi_processor_notify_smm(struct module *calling_module) if (!try_module_get(calling_module)) return -EINVAL; - /* is_done is set to negative if an error occured, - * and to postitive if _no_ error occured, but SMM + /* is_done is set to negative if an error occurred, + * and to postitive if _no_ error occurred, but SMM * was already notified. This avoids double notification * which might lead to unexpected results... */ diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 730863855ed5..ff3632717c51 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -32,8 +32,10 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/cpufreq.h> +#ifdef CONFIG_ACPI_PROCFS #include <linux/proc_fs.h> #include <linux/seq_file.h> +#endif #include <asm/io.h> #include <asm/uaccess.h> @@ -1214,6 +1216,7 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) return result; } +#ifdef CONFIG_ACPI_PROCFS /* proc interface */ static int acpi_processor_throttling_seq_show(struct seq_file *seq, void *offset) @@ -1322,3 +1325,4 @@ const struct file_operations acpi_processor_throttling_fops = { .llseek = seq_lseek, .release = single_release, }; +#endif diff --git a/drivers/acpi/sbs.c b/drivers/acpi/sbs.c index 4ff76e8174eb..e5dbedb16bbf 100644 --- a/drivers/acpi/sbs.c +++ b/drivers/acpi/sbs.c @@ -40,10 +40,7 @@ #include <linux/timer.h> #include <linux/jiffies.h> #include <linux/delay.h> - -#ifdef CONFIG_ACPI_SYSFS_POWER #include <linux/power_supply.h> -#endif #include "sbshc.h" @@ -85,9 +82,7 @@ static const struct acpi_device_id sbs_device_ids[] = { MODULE_DEVICE_TABLE(acpi, sbs_device_ids); struct acpi_battery { -#ifdef CONFIG_ACPI_SYSFS_POWER struct power_supply bat; -#endif struct acpi_sbs *sbs; #ifdef CONFIG_ACPI_PROCFS_POWER struct proc_dir_entry *proc_entry; @@ -120,9 +115,7 @@ struct acpi_battery { #define to_acpi_battery(x) container_of(x, struct acpi_battery, bat); struct acpi_sbs { -#ifdef CONFIG_ACPI_SYSFS_POWER struct power_supply charger; -#endif struct acpi_device *device; struct acpi_smb_hc *hc; struct mutex lock; @@ -166,7 +159,6 @@ static inline int acpi_battery_scale(struct acpi_battery *battery) acpi_battery_ipscale(battery); } -#ifdef CONFIG_ACPI_SYSFS_POWER static int sbs_get_ac_property(struct power_supply *psy, enum power_supply_property psp, union power_supply_propval *val) @@ -313,7 +305,6 @@ static enum power_supply_property sbs_energy_battery_props[] = { POWER_SUPPLY_PROP_MANUFACTURER, }; -#endif /* -------------------------------------------------------------------------- Smart Battery System Management @@ -449,7 +440,6 @@ static int acpi_ac_get_present(struct acpi_sbs *sbs) return result; } -#ifdef CONFIG_ACPI_SYSFS_POWER static ssize_t acpi_battery_alarm_show(struct device *dev, struct device_attribute *attr, char *buf) @@ -479,7 +469,6 @@ static struct device_attribute alarm_attr = { .show = acpi_battery_alarm_show, .store = acpi_battery_alarm_store, }; -#endif /* -------------------------------------------------------------------------- FS Interface (/proc/acpi) @@ -798,7 +787,6 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) &acpi_battery_state_fops, &acpi_battery_alarm_fops, battery); #endif -#ifdef CONFIG_ACPI_SYSFS_POWER battery->bat.name = battery->name; battery->bat.type = POWER_SUPPLY_TYPE_BATTERY; if (!acpi_battery_mode(battery)) { @@ -819,7 +807,6 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) goto end; battery->have_sysfs_alarm = 1; end: -#endif printk(KERN_INFO PREFIX "%s [%s]: Battery Slot [%s] (battery %s)\n", ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device), battery->name, battery->present ? "present" : "absent"); @@ -828,17 +815,13 @@ static int acpi_battery_add(struct acpi_sbs *sbs, int id) static void acpi_battery_remove(struct acpi_sbs *sbs, int id) { -#if defined(CONFIG_ACPI_SYSFS_POWER) || defined(CONFIG_ACPI_PROCFS_POWER) struct acpi_battery *battery = &sbs->battery[id]; -#endif -#ifdef CONFIG_ACPI_SYSFS_POWER if (battery->bat.dev) { if (battery->have_sysfs_alarm) device_remove_file(battery->bat.dev, &alarm_attr); power_supply_unregister(&battery->bat); } -#endif #ifdef CONFIG_ACPI_PROCFS_POWER if (battery->proc_entry) acpi_sbs_remove_fs(&battery->proc_entry, acpi_battery_dir); @@ -859,14 +842,12 @@ static int acpi_charger_add(struct acpi_sbs *sbs) if (result) goto end; #endif -#ifdef CONFIG_ACPI_SYSFS_POWER sbs->charger.name = "sbs-charger"; sbs->charger.type = POWER_SUPPLY_TYPE_MAINS; sbs->charger.properties = sbs_ac_props; sbs->charger.num_properties = ARRAY_SIZE(sbs_ac_props); sbs->charger.get_property = sbs_get_ac_property; power_supply_register(&sbs->device->dev, &sbs->charger); -#endif printk(KERN_INFO PREFIX "%s [%s]: AC Adapter [%s] (%s)\n", ACPI_SBS_DEVICE_NAME, acpi_device_bid(sbs->device), ACPI_AC_DIR_NAME, sbs->charger_present ? "on-line" : "off-line"); @@ -876,10 +857,8 @@ static int acpi_charger_add(struct acpi_sbs *sbs) static void acpi_charger_remove(struct acpi_sbs *sbs) { -#ifdef CONFIG_ACPI_SYSFS_POWER if (sbs->charger.dev) power_supply_unregister(&sbs->charger); -#endif #ifdef CONFIG_ACPI_PROCFS_POWER if (sbs->charger_entry) acpi_sbs_remove_fs(&sbs->charger_entry, acpi_ac_dir); @@ -900,9 +879,7 @@ static void acpi_sbs_callback(void *context) ACPI_SBS_NOTIFY_STATUS, sbs->charger_present); #endif -#ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&sbs->charger.dev->kobj, KOBJ_CHANGE); -#endif } if (sbs->manager_present) { for (id = 0; id < MAX_SBS_BAT; ++id) { @@ -919,9 +896,7 @@ static void acpi_sbs_callback(void *context) ACPI_SBS_NOTIFY_STATUS, bat->present); #endif -#ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&bat->bat.dev->kobj, KOBJ_CHANGE); -#endif } } } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index b23825ecfa37..2b6c21d86b98 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -26,6 +26,8 @@ extern struct acpi_device *acpi_root; #define ACPI_IS_ROOT_DEVICE(device) (!(device)->parent) +static const char *dummy_hid = "device"; + static LIST_HEAD(acpi_device_list); static LIST_HEAD(acpi_bus_id_list); DEFINE_MUTEX(acpi_device_lock); @@ -49,6 +51,9 @@ static int create_modalias(struct acpi_device *acpi_dev, char *modalias, int count; struct acpi_hardware_id *id; + if (list_empty(&acpi_dev->pnp.ids)) + return 0; + len = snprintf(modalias, size, "acpi:"); size -= len; @@ -202,13 +207,15 @@ static int acpi_device_setup_files(struct acpi_device *dev) goto end; } - result = device_create_file(&dev->dev, &dev_attr_hid); - if (result) - goto end; + if (!list_empty(&dev->pnp.ids)) { + result = device_create_file(&dev->dev, &dev_attr_hid); + if (result) + goto end; - result = device_create_file(&dev->dev, &dev_attr_modalias); - if (result) - goto end; + result = device_create_file(&dev->dev, &dev_attr_modalias); + if (result) + goto end; + } /* * If device has _EJ0, 'eject' file is created that is used to trigger @@ -316,6 +323,9 @@ static int acpi_device_uevent(struct device *dev, struct kobj_uevent_env *env) struct acpi_device *acpi_dev = to_acpi_device(dev); int len; + if (list_empty(&acpi_dev->pnp.ids)) + return 0; + if (add_uevent_var(env, "MODALIAS=")) return -ENOMEM; len = create_modalias(acpi_dev, &env->buf[env->buflen - 1], @@ -1010,10 +1020,13 @@ static int acpi_dock_match(struct acpi_device *device) return acpi_get_handle(device->handle, "_DCK", &tmp); } -char *acpi_device_hid(struct acpi_device *device) +const char *acpi_device_hid(struct acpi_device *device) { struct acpi_hardware_id *hid; + if (list_empty(&device->pnp.ids)) + return dummy_hid; + hid = list_first_entry(&device->pnp.ids, struct acpi_hardware_id, list); return hid->id; } @@ -1142,16 +1155,6 @@ static void acpi_device_set_id(struct acpi_device *device) acpi_add_id(device, ACPI_BUTTON_HID_SLEEPF); break; } - - /* - * We build acpi_devices for some objects that don't have _HID or _CID, - * e.g., PCI bridges and slots. Drivers can't bind to these objects, - * but we do use them indirectly by traversing the acpi_device tree. - * This generic ID isn't useful for driver binding, but it provides - * the useful property that "every acpi_device has an ID." - */ - if (list_empty(&device->pnp.ids)) - acpi_add_id(device, "device"); } static int acpi_device_set_context(struct acpi_device *device) @@ -1431,6 +1434,7 @@ EXPORT_SYMBOL(acpi_bus_add); int acpi_bus_start(struct acpi_device *device) { struct acpi_bus_ops ops; + int result; if (!device) return -EINVAL; @@ -1438,7 +1442,11 @@ int acpi_bus_start(struct acpi_device *device) memset(&ops, 0, sizeof(ops)); ops.acpi_op_start = 1; - return acpi_bus_scan(device->handle, &ops, NULL); + result = acpi_bus_scan(device->handle, &ops, NULL); + + acpi_update_gpes(); + + return result; } EXPORT_SYMBOL(acpi_bus_start); @@ -1552,6 +1560,8 @@ int __init acpi_scan_init(void) if (result) acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL); + else + acpi_update_gpes(); return result; } diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index cf82989ae756..e807f4196f89 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -27,6 +27,8 @@ u8 sleep_states[ACPI_S_STATE_COUNT]; +static u32 acpi_target_sleep_state = ACPI_STATE_S0; + static void acpi_sleep_tts_switch(u32 acpi_state) { union acpi_object in_arg = { ACPI_TYPE_INTEGER }; @@ -79,8 +81,6 @@ static int acpi_sleep_prepare(u32 acpi_state) } #ifdef CONFIG_ACPI_SLEEP -static u32 acpi_target_sleep_state = ACPI_STATE_S0; - /* * The ACPI specification wants us to save NVS memory regions during hibernation * and to restore them during the subsequent resume. Windows does that also for @@ -363,6 +363,12 @@ static int __init init_old_suspend_ordering(const struct dmi_system_id *d) return 0; } +static int __init init_nvs_nosave(const struct dmi_system_id *d) +{ + acpi_nvs_nosave(); + return 0; +} + static struct dmi_system_id __initdata acpisleep_dmi_table[] = { { .callback = init_old_suspend_ordering, @@ -397,6 +403,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), }, }, + { + .callback = init_nvs_nosave, + .ident = "Sony Vaio VGN-SR11M", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"), + }, + }, + { + .callback = init_nvs_nosave, + .ident = "Everex StepNote Series", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"), + }, + }, {}, }; #endif /* CONFIG_SUSPEND */ @@ -540,7 +562,7 @@ int acpi_suspend(u32 acpi_state) return -EINVAL; } -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM_OPS /** * acpi_pm_device_sleep_state - return preferred power state of ACPI device * in the system sleep state given by %acpi_target_sleep_state @@ -602,7 +624,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) * can wake the system. _S0W may be valid, too. */ if (acpi_target_sleep_state == ACPI_STATE_S0 || - (device_may_wakeup(dev) && adev->wakeup.state.enabled && + (device_may_wakeup(dev) && adev->wakeup.sleep_state <= acpi_target_sleep_state)) { acpi_status status; @@ -610,7 +632,9 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) status = acpi_evaluate_integer(handle, acpi_method, NULL, &d_max); if (ACPI_FAILURE(status)) { - d_max = d_min; + if (acpi_target_sleep_state != ACPI_STATE_S0 || + status != AE_NOT_FOUND) + d_max = d_min; } else if (d_max < d_min) { /* Warn the user of the broken DSDT */ printk(KERN_WARNING "ACPI: Wrong value from %s\n", @@ -624,7 +648,9 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p) *d_min_p = d_min; return d_max; } +#endif /* CONFIG_PM_OPS */ +#ifdef CONFIG_PM_SLEEP /** * acpi_pm_device_sleep_wake - enable or disable the system wake-up * capability of given device @@ -655,7 +681,7 @@ int acpi_pm_device_sleep_wake(struct device *dev, bool enable) return error; } -#endif +#endif /* CONFIG_PM_SLEEP */ static void acpi_power_off_prepare(void) { diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 68e2e4582fa2..f8588f81048a 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -100,7 +100,7 @@ static const struct acpi_dlevel acpi_debug_levels[] = { ACPI_DEBUG_INIT(ACPI_LV_EVENTS), }; -static int param_get_debug_layer(char *buffer, struct kernel_param *kp) +static int param_get_debug_layer(char *buffer, const struct kernel_param *kp) { int result = 0; int i; @@ -128,7 +128,7 @@ static int param_get_debug_layer(char *buffer, struct kernel_param *kp) return result; } -static int param_get_debug_level(char *buffer, struct kernel_param *kp) +static int param_get_debug_level(char *buffer, const struct kernel_param *kp) { int result = 0; int i; @@ -149,10 +149,18 @@ static int param_get_debug_level(char *buffer, struct kernel_param *kp) return result; } -module_param_call(debug_layer, param_set_uint, param_get_debug_layer, - &acpi_dbg_layer, 0644); -module_param_call(debug_level, param_set_uint, param_get_debug_level, - &acpi_dbg_level, 0644); +static struct kernel_param_ops param_ops_debug_layer = { + .set = param_set_uint, + .get = param_get_debug_layer, +}; + +static struct kernel_param_ops param_ops_debug_level = { + .set = param_set_uint, + .get = param_get_debug_level, +}; + +module_param_cb(debug_layer, ¶m_ops_debug_layer, &acpi_dbg_layer, 0644); +module_param_cb(debug_level, ¶m_ops_debug_level, &acpi_dbg_level, 0644); static char trace_method_name[6]; module_param_string(trace_method_name, trace_method_name, 6, 0644); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 2f8f17131d9f..5a27b0a31315 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -37,12 +37,6 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/types.h> - -#ifdef CONFIG_ACPI_PROCFS -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#endif - #include <linux/jiffies.h> #include <linux/kmod.h> #include <linux/reboot.h> @@ -195,61 +189,6 @@ struct acpi_thermal { struct mutex lock; }; -#ifdef CONFIG_ACPI_PROCFS -static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file); -static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file); -static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file); -static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file); -static ssize_t acpi_thermal_write_cooling_mode(struct file *, - const char __user *, size_t, - loff_t *); -static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file); -static ssize_t acpi_thermal_write_polling(struct file *, const char __user *, - size_t, loff_t *); - -static const struct file_operations acpi_thermal_state_fops = { - .owner = THIS_MODULE, - .open = acpi_thermal_state_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations acpi_thermal_temp_fops = { - .owner = THIS_MODULE, - .open = acpi_thermal_temp_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations acpi_thermal_trip_fops = { - .owner = THIS_MODULE, - .open = acpi_thermal_trip_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations acpi_thermal_cooling_fops = { - .owner = THIS_MODULE, - .open = acpi_thermal_cooling_open_fs, - .read = seq_read, - .write = acpi_thermal_write_cooling_mode, - .llseek = seq_lseek, - .release = single_release, -}; - -static const struct file_operations acpi_thermal_polling_fops = { - .owner = THIS_MODULE, - .open = acpi_thermal_polling_open_fs, - .read = seq_read, - .write = acpi_thermal_write_polling, - .llseek = seq_lseek, - .release = single_release, -}; -#endif /* CONFIG_ACPI_PROCFS*/ - /* -------------------------------------------------------------------------- Thermal Zone Management -------------------------------------------------------------------------- */ @@ -958,358 +897,6 @@ static void acpi_thermal_unregister_thermal_zone(struct acpi_thermal *tz) /* -------------------------------------------------------------------------- - FS Interface (/proc) - -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_PROCFS -static struct proc_dir_entry *acpi_thermal_dir; - -static int acpi_thermal_state_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_thermal *tz = seq->private; - - - if (!tz) - goto end; - - seq_puts(seq, "state: "); - - if (!tz->state.critical && !tz->state.hot && !tz->state.passive - && !tz->state.active) - seq_puts(seq, "ok\n"); - else { - if (tz->state.critical) - seq_puts(seq, "critical "); - if (tz->state.hot) - seq_puts(seq, "hot "); - if (tz->state.passive) - seq_puts(seq, "passive "); - if (tz->state.active) - seq_printf(seq, "active[%d]", tz->state.active_index); - seq_puts(seq, "\n"); - } - - end: - return 0; -} - -static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_thermal_state_seq_show, PDE(inode)->data); -} - -static int acpi_thermal_temp_seq_show(struct seq_file *seq, void *offset) -{ - int result = 0; - struct acpi_thermal *tz = seq->private; - - - if (!tz) - goto end; - - result = acpi_thermal_get_temperature(tz); - if (result) - goto end; - - seq_printf(seq, "temperature: %ld C\n", - KELVIN_TO_CELSIUS(tz->temperature)); - - end: - return 0; -} - -static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_thermal_temp_seq_show, PDE(inode)->data); -} - -static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_thermal *tz = seq->private; - struct acpi_device *device; - acpi_status status; - - int i = 0; - int j = 0; - - - if (!tz) - goto end; - - if (tz->trips.critical.flags.valid) - seq_printf(seq, "critical (S5): %ld C%s", - KELVIN_TO_CELSIUS(tz->trips.critical.temperature), - nocrt ? " <disabled>\n" : "\n"); - - if (tz->trips.hot.flags.valid) - seq_printf(seq, "hot (S4): %ld C%s", - KELVIN_TO_CELSIUS(tz->trips.hot.temperature), - nocrt ? " <disabled>\n" : "\n"); - - if (tz->trips.passive.flags.valid) { - seq_printf(seq, - "passive: %ld C: tc1=%lu tc2=%lu tsp=%lu devices=", - KELVIN_TO_CELSIUS(tz->trips.passive.temperature), - tz->trips.passive.tc1, tz->trips.passive.tc2, - tz->trips.passive.tsp); - for (j = 0; j < tz->trips.passive.devices.count; j++) { - status = acpi_bus_get_device(tz->trips.passive.devices. - handles[j], &device); - seq_printf(seq, "%4.4s ", status ? "" : - acpi_device_bid(device)); - } - seq_puts(seq, "\n"); - } else { - seq_printf(seq, "passive (forced):"); - if (tz->thermal_zone->forced_passive) - seq_printf(seq, " %i C\n", - tz->thermal_zone->forced_passive / 1000); - else - seq_printf(seq, "<not set>\n"); - } - - for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) { - if (!(tz->trips.active[i].flags.valid)) - break; - seq_printf(seq, "active[%d]: %ld C: devices=", - i, - KELVIN_TO_CELSIUS(tz->trips.active[i].temperature)); - for (j = 0; j < tz->trips.active[i].devices.count; j++){ - status = acpi_bus_get_device(tz->trips.active[i]. - devices.handles[j], - &device); - seq_printf(seq, "%4.4s ", status ? "" : - acpi_device_bid(device)); - } - seq_puts(seq, "\n"); - } - - end: - return 0; -} - -static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_thermal_trip_seq_show, PDE(inode)->data); -} - -static int acpi_thermal_cooling_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_thermal *tz = seq->private; - - - if (!tz) - goto end; - - if (!tz->flags.cooling_mode) - seq_puts(seq, "<setting not supported>\n"); - else - seq_puts(seq, "0 - Active; 1 - Passive\n"); - - end: - return 0; -} - -static int acpi_thermal_cooling_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_thermal_cooling_seq_show, - PDE(inode)->data); -} - -static ssize_t -acpi_thermal_write_cooling_mode(struct file *file, - const char __user * buffer, - size_t count, loff_t * ppos) -{ - struct seq_file *m = file->private_data; - struct acpi_thermal *tz = m->private; - int result = 0; - char mode_string[12] = { '\0' }; - - - if (!tz || (count > sizeof(mode_string) - 1)) - return -EINVAL; - - if (!tz->flags.cooling_mode) - return -ENODEV; - - if (copy_from_user(mode_string, buffer, count)) - return -EFAULT; - - mode_string[count] = '\0'; - - result = acpi_thermal_set_cooling_mode(tz, - simple_strtoul(mode_string, NULL, - 0)); - if (result) - return result; - - acpi_thermal_check(tz); - - return count; -} - -static int acpi_thermal_polling_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_thermal *tz = seq->private; - - - if (!tz) - goto end; - - if (!tz->thermal_zone->polling_delay) { - seq_puts(seq, "<polling disabled>\n"); - goto end; - } - - seq_printf(seq, "polling frequency: %d seconds\n", - (tz->thermal_zone->polling_delay / 1000)); - - end: - return 0; -} - -static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_thermal_polling_seq_show, - PDE(inode)->data); -} - -static int acpi_thermal_set_polling(struct acpi_thermal *tz, int seconds) -{ - if (!tz) - return -EINVAL; - - /* Convert value to deci-seconds */ - tz->polling_frequency = seconds * 10; - - tz->thermal_zone->polling_delay = seconds * 1000; - - if (tz->tz_enabled) - thermal_zone_device_update(tz->thermal_zone); - - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Polling frequency set to %lu seconds\n", - tz->polling_frequency/10)); - - return 0; -} - -static ssize_t -acpi_thermal_write_polling(struct file *file, - const char __user * buffer, - size_t count, loff_t * ppos) -{ - struct seq_file *m = file->private_data; - struct acpi_thermal *tz = m->private; - int result = 0; - char polling_string[12] = { '\0' }; - int seconds = 0; - - - if (!tz || (count > sizeof(polling_string) - 1)) - return -EINVAL; - - if (copy_from_user(polling_string, buffer, count)) - return -EFAULT; - - polling_string[count] = '\0'; - - seconds = simple_strtoul(polling_string, NULL, 0); - - result = acpi_thermal_set_polling(tz, seconds); - if (result) - return result; - - acpi_thermal_check(tz); - - return count; -} - -static int acpi_thermal_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *entry = NULL; - - - if (!acpi_device_dir(device)) { - acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), - acpi_thermal_dir); - if (!acpi_device_dir(device)) - return -ENODEV; - } - - /* 'state' [R] */ - entry = proc_create_data(ACPI_THERMAL_FILE_STATE, - S_IRUGO, acpi_device_dir(device), - &acpi_thermal_state_fops, - acpi_driver_data(device)); - if (!entry) - return -ENODEV; - - /* 'temperature' [R] */ - entry = proc_create_data(ACPI_THERMAL_FILE_TEMPERATURE, - S_IRUGO, acpi_device_dir(device), - &acpi_thermal_temp_fops, - acpi_driver_data(device)); - if (!entry) - return -ENODEV; - - /* 'trip_points' [R] */ - entry = proc_create_data(ACPI_THERMAL_FILE_TRIP_POINTS, - S_IRUGO, - acpi_device_dir(device), - &acpi_thermal_trip_fops, - acpi_driver_data(device)); - if (!entry) - return -ENODEV; - - /* 'cooling_mode' [R/W] */ - entry = proc_create_data(ACPI_THERMAL_FILE_COOLING_MODE, - S_IFREG | S_IRUGO | S_IWUSR, - acpi_device_dir(device), - &acpi_thermal_cooling_fops, - acpi_driver_data(device)); - if (!entry) - return -ENODEV; - - /* 'polling_frequency' [R/W] */ - entry = proc_create_data(ACPI_THERMAL_FILE_POLLING_FREQ, - S_IFREG | S_IRUGO | S_IWUSR, - acpi_device_dir(device), - &acpi_thermal_polling_fops, - acpi_driver_data(device)); - if (!entry) - return -ENODEV; - return 0; -} - -static int acpi_thermal_remove_fs(struct acpi_device *device) -{ - - if (acpi_device_dir(device)) { - remove_proc_entry(ACPI_THERMAL_FILE_POLLING_FREQ, - acpi_device_dir(device)); - remove_proc_entry(ACPI_THERMAL_FILE_COOLING_MODE, - acpi_device_dir(device)); - remove_proc_entry(ACPI_THERMAL_FILE_TRIP_POINTS, - acpi_device_dir(device)); - remove_proc_entry(ACPI_THERMAL_FILE_TEMPERATURE, - acpi_device_dir(device)); - remove_proc_entry(ACPI_THERMAL_FILE_STATE, - acpi_device_dir(device)); - remove_proc_entry(acpi_device_bid(device), acpi_thermal_dir); - acpi_device_dir(device) = NULL; - } - - return 0; -} -#else -static inline int acpi_thermal_add_fs(struct acpi_device *device) { return 0; } -static inline int acpi_thermal_remove_fs(struct acpi_device *device) -{ - return 0; -} -#endif /* CONFIG_ACPI_PROCFS */ -/* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ @@ -1428,17 +1015,11 @@ static int acpi_thermal_add(struct acpi_device *device) if (result) goto free_memory; - result = acpi_thermal_add_fs(device); - if (result) - goto unregister_thermal_zone; - printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature)); goto end; -unregister_thermal_zone: - thermal_zone_device_unregister(tz->thermal_zone); free_memory: kfree(tz); end: @@ -1454,7 +1035,6 @@ static int acpi_thermal_remove(struct acpi_device *device, int type) tz = acpi_driver_data(device); - acpi_thermal_remove_fs(device); acpi_thermal_unregister_thermal_zone(tz); mutex_destroy(&tz->lock); kfree(tz); @@ -1580,19 +1160,9 @@ static int __init acpi_thermal_init(void) return -ENODEV; } -#ifdef CONFIG_ACPI_PROCFS - acpi_thermal_dir = proc_mkdir(ACPI_THERMAL_CLASS, acpi_root_dir); - if (!acpi_thermal_dir) - return -ENODEV; -#endif - result = acpi_bus_register_driver(&acpi_thermal_driver); - if (result < 0) { -#ifdef CONFIG_ACPI_PROCFS - remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir); -#endif + if (result < 0) return -ENODEV; - } return 0; } @@ -1602,10 +1172,6 @@ static void __exit acpi_thermal_exit(void) acpi_bus_unregister_driver(&acpi_thermal_driver); -#ifdef CONFIG_ACPI_PROCFS - remove_proc_entry(ACPI_THERMAL_CLASS, acpi_root_dir); -#endif - return; } diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 67dec0c675aa..5cd0228d2daa 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -30,8 +30,6 @@ #include <linux/types.h> #include <linux/list.h> #include <linux/mutex.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> #include <linux/input.h> #include <linux/backlight.h> #include <linux/thermal.h> @@ -152,9 +150,6 @@ struct acpi_video_bus { struct acpi_video_bus_flags flags; struct list_head video_device_list; struct mutex device_list_lock; /* protects video_device_list */ -#ifdef CONFIG_ACPI_PROCFS - struct proc_dir_entry *dir; -#endif struct input_dev *input; char phys[32]; /* for input device */ struct notifier_block pm_nb; @@ -210,108 +205,6 @@ struct acpi_video_device { struct output_device *output_dev; }; -#ifdef CONFIG_ACPI_PROCFS -/* bus */ -static int acpi_video_bus_info_open_fs(struct inode *inode, struct file *file); -static const struct file_operations acpi_video_bus_info_fops = { - .owner = THIS_MODULE, - .open = acpi_video_bus_info_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_video_bus_ROM_open_fs(struct inode *inode, struct file *file); -static const struct file_operations acpi_video_bus_ROM_fops = { - .owner = THIS_MODULE, - .open = acpi_video_bus_ROM_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_video_bus_POST_info_open_fs(struct inode *inode, - struct file *file); -static const struct file_operations acpi_video_bus_POST_info_fops = { - .owner = THIS_MODULE, - .open = acpi_video_bus_POST_info_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_video_bus_POST_open_fs(struct inode *inode, struct file *file); -static ssize_t acpi_video_bus_write_POST(struct file *file, - const char __user *buffer, size_t count, loff_t *data); -static const struct file_operations acpi_video_bus_POST_fops = { - .owner = THIS_MODULE, - .open = acpi_video_bus_POST_open_fs, - .read = seq_read, - .write = acpi_video_bus_write_POST, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_video_bus_DOS_open_fs(struct inode *inode, struct file *file); -static ssize_t acpi_video_bus_write_DOS(struct file *file, - const char __user *buffer, size_t count, loff_t *data); -static const struct file_operations acpi_video_bus_DOS_fops = { - .owner = THIS_MODULE, - .open = acpi_video_bus_DOS_open_fs, - .read = seq_read, - .write = acpi_video_bus_write_DOS, - .llseek = seq_lseek, - .release = single_release, -}; - -/* device */ -static int acpi_video_device_info_open_fs(struct inode *inode, - struct file *file); -static const struct file_operations acpi_video_device_info_fops = { - .owner = THIS_MODULE, - .open = acpi_video_device_info_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_video_device_state_open_fs(struct inode *inode, - struct file *file); -static ssize_t acpi_video_device_write_state(struct file *file, - const char __user *buffer, size_t count, loff_t *data); -static const struct file_operations acpi_video_device_state_fops = { - .owner = THIS_MODULE, - .open = acpi_video_device_state_open_fs, - .read = seq_read, - .write = acpi_video_device_write_state, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_video_device_brightness_open_fs(struct inode *inode, - struct file *file); -static ssize_t acpi_video_device_write_brightness(struct file *file, - const char __user *buffer, size_t count, loff_t *data); -static const struct file_operations acpi_video_device_brightness_fops = { - .owner = THIS_MODULE, - .open = acpi_video_device_brightness_open_fs, - .read = seq_read, - .write = acpi_video_device_write_brightness, - .llseek = seq_lseek, - .release = single_release, -}; - -static int acpi_video_device_EDID_open_fs(struct inode *inode, - struct file *file); -static const struct file_operations acpi_video_device_EDID_fops = { - .owner = THIS_MODULE, - .open = acpi_video_device_EDID_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; -#endif /* CONFIG_ACPI_PROCFS */ - static const char device_decode[][30] = { "motherboard VGA device", "PCI VGA device", @@ -1111,646 +1004,6 @@ static int acpi_video_bus_check(struct acpi_video_bus *video) } /* -------------------------------------------------------------------------- - FS Interface (/proc) - -------------------------------------------------------------------------- */ -#ifdef CONFIG_ACPI_PROCFS - -static struct proc_dir_entry *acpi_video_dir; - -/* video devices */ - -static int acpi_video_device_info_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_video_device *dev = seq->private; - - - if (!dev) - goto end; - - seq_printf(seq, "device_id: 0x%04x\n", (u32) dev->device_id); - seq_printf(seq, "type: "); - if (dev->flags.crt) - seq_printf(seq, "CRT\n"); - else if (dev->flags.lcd) - seq_printf(seq, "LCD\n"); - else if (dev->flags.tvout) - seq_printf(seq, "TVOUT\n"); - else if (dev->flags.dvi) - seq_printf(seq, "DVI\n"); - else - seq_printf(seq, "UNKNOWN\n"); - - seq_printf(seq, "known by bios: %s\n", dev->flags.bios ? "yes" : "no"); - - end: - return 0; -} - -static int -acpi_video_device_info_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_device_info_seq_show, - PDE(inode)->data); -} - -static int -acpi_video_device_query(struct acpi_video_device *device, - unsigned long long *state) -{ - int status; - - status = acpi_evaluate_integer(device->dev->handle, "_DGS", - NULL, state); - - return status; -} - -static int acpi_video_device_state_seq_show(struct seq_file *seq, void *offset) -{ - int status; - struct acpi_video_device *dev = seq->private; - unsigned long long state; - - - if (!dev) - goto end; - - status = acpi_video_device_get_state(dev, &state); - seq_printf(seq, "state: "); - if (ACPI_SUCCESS(status)) - seq_printf(seq, "0x%02llx\n", state); - else - seq_printf(seq, "<not supported>\n"); - - status = acpi_video_device_query(dev, &state); - seq_printf(seq, "query: "); - if (ACPI_SUCCESS(status)) - seq_printf(seq, "0x%02llx\n", state); - else - seq_printf(seq, "<not supported>\n"); - - end: - return 0; -} - -static int -acpi_video_device_state_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_device_state_seq_show, - PDE(inode)->data); -} - -static ssize_t -acpi_video_device_write_state(struct file *file, - const char __user * buffer, - size_t count, loff_t * data) -{ - int status; - struct seq_file *m = file->private_data; - struct acpi_video_device *dev = m->private; - char str[12] = { 0 }; - u32 state = 0; - - - if (!dev || count >= sizeof(str)) - return -EINVAL; - - if (copy_from_user(str, buffer, count)) - return -EFAULT; - - str[count] = 0; - state = simple_strtoul(str, NULL, 0); - state &= ((1ul << 31) | (1ul << 30) | (1ul << 0)); - - status = acpi_video_device_set_state(dev, state); - - if (status) - return -EFAULT; - - return count; -} - -static int -acpi_video_device_brightness_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_video_device *dev = seq->private; - int i; - - - if (!dev || !dev->brightness) { - seq_printf(seq, "<not supported>\n"); - return 0; - } - - seq_printf(seq, "levels: "); - for (i = 2; i < dev->brightness->count; i++) - seq_printf(seq, " %d", dev->brightness->levels[i]); - seq_printf(seq, "\ncurrent: %d\n", dev->brightness->curr); - - return 0; -} - -static int -acpi_video_device_brightness_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_device_brightness_seq_show, - PDE(inode)->data); -} - -static ssize_t -acpi_video_device_write_brightness(struct file *file, - const char __user * buffer, - size_t count, loff_t * data) -{ - struct seq_file *m = file->private_data; - struct acpi_video_device *dev = m->private; - char str[5] = { 0 }; - unsigned int level = 0; - int i; - - - if (!dev || !dev->brightness || count >= sizeof(str)) - return -EINVAL; - - if (copy_from_user(str, buffer, count)) - return -EFAULT; - - str[count] = 0; - level = simple_strtoul(str, NULL, 0); - - if (level > 100) - return -EFAULT; - - /* validate through the list of available levels */ - for (i = 2; i < dev->brightness->count; i++) - if (level == dev->brightness->levels[i]) { - if (!acpi_video_device_lcd_set_level(dev, level)) - return count; - break; - } - - return -EINVAL; -} - -static int acpi_video_device_EDID_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_video_device *dev = seq->private; - int status; - int i; - union acpi_object *edid = NULL; - - - if (!dev) - goto out; - - status = acpi_video_device_EDID(dev, &edid, 128); - if (ACPI_FAILURE(status)) { - status = acpi_video_device_EDID(dev, &edid, 256); - } - - if (ACPI_FAILURE(status)) { - goto out; - } - - if (edid && edid->type == ACPI_TYPE_BUFFER) { - for (i = 0; i < edid->buffer.length; i++) - seq_putc(seq, edid->buffer.pointer[i]); - } - - out: - if (!edid) - seq_printf(seq, "<not supported>\n"); - else - kfree(edid); - - return 0; -} - -static int -acpi_video_device_EDID_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_device_EDID_seq_show, - PDE(inode)->data); -} - -static int acpi_video_device_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *entry, *device_dir; - struct acpi_video_device *vid_dev; - - vid_dev = acpi_driver_data(device); - if (!vid_dev) - return -ENODEV; - - device_dir = proc_mkdir(acpi_device_bid(device), - vid_dev->video->dir); - if (!device_dir) - return -ENOMEM; - - /* 'info' [R] */ - entry = proc_create_data("info", S_IRUGO, device_dir, - &acpi_video_device_info_fops, acpi_driver_data(device)); - if (!entry) - goto err_remove_dir; - - /* 'state' [R/W] */ - entry = proc_create_data("state", S_IFREG | S_IRUGO | S_IWUSR, - device_dir, - &acpi_video_device_state_fops, - acpi_driver_data(device)); - if (!entry) - goto err_remove_info; - - /* 'brightness' [R/W] */ - entry = proc_create_data("brightness", S_IFREG | S_IRUGO | S_IWUSR, - device_dir, - &acpi_video_device_brightness_fops, - acpi_driver_data(device)); - if (!entry) - goto err_remove_state; - - /* 'EDID' [R] */ - entry = proc_create_data("EDID", S_IRUGO, device_dir, - &acpi_video_device_EDID_fops, - acpi_driver_data(device)); - if (!entry) - goto err_remove_brightness; - - acpi_device_dir(device) = device_dir; - - return 0; - - err_remove_brightness: - remove_proc_entry("brightness", device_dir); - err_remove_state: - remove_proc_entry("state", device_dir); - err_remove_info: - remove_proc_entry("info", device_dir); - err_remove_dir: - remove_proc_entry(acpi_device_bid(device), vid_dev->video->dir); - return -ENOMEM; -} - -static int acpi_video_device_remove_fs(struct acpi_device *device) -{ - struct acpi_video_device *vid_dev; - struct proc_dir_entry *device_dir; - - vid_dev = acpi_driver_data(device); - if (!vid_dev || !vid_dev->video || !vid_dev->video->dir) - return -ENODEV; - - device_dir = acpi_device_dir(device); - if (device_dir) { - remove_proc_entry("info", device_dir); - remove_proc_entry("state", device_dir); - remove_proc_entry("brightness", device_dir); - remove_proc_entry("EDID", device_dir); - remove_proc_entry(acpi_device_bid(device), vid_dev->video->dir); - acpi_device_dir(device) = NULL; - } - - return 0; -} - -/* video bus */ -static int acpi_video_bus_info_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_video_bus *video = seq->private; - - - if (!video) - goto end; - - seq_printf(seq, "Switching heads: %s\n", - video->flags.multihead ? "yes" : "no"); - seq_printf(seq, "Video ROM: %s\n", - video->flags.rom ? "yes" : "no"); - seq_printf(seq, "Device to be POSTed on boot: %s\n", - video->flags.post ? "yes" : "no"); - - end: - return 0; -} - -static int acpi_video_bus_info_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_bus_info_seq_show, - PDE(inode)->data); -} - -static int acpi_video_bus_ROM_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_video_bus *video = seq->private; - - - if (!video) - goto end; - - printk(KERN_INFO PREFIX "Please implement %s\n", __func__); - seq_printf(seq, "<TODO>\n"); - - end: - return 0; -} - -static int acpi_video_bus_ROM_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_bus_ROM_seq_show, PDE(inode)->data); -} - -static int -acpi_video_bus_POST_options(struct acpi_video_bus *video, - unsigned long long *options) -{ - int status; - - status = acpi_evaluate_integer(video->device->handle, "_VPO", - NULL, options); - *options &= 3; - - return status; -} - -static int acpi_video_bus_POST_info_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_video_bus *video = seq->private; - unsigned long long options; - int status; - - - if (!video) - goto end; - - status = acpi_video_bus_POST_options(video, &options); - if (ACPI_SUCCESS(status)) { - if (!(options & 1)) { - printk(KERN_WARNING PREFIX - "The motherboard VGA device is not listed as a possible POST device.\n"); - printk(KERN_WARNING PREFIX - "This indicates a BIOS bug. Please contact the manufacturer.\n"); - } - printk(KERN_WARNING "%llx\n", options); - seq_printf(seq, "can POST: <integrated video>"); - if (options & 2) - seq_printf(seq, " <PCI video>"); - if (options & 4) - seq_printf(seq, " <AGP video>"); - seq_putc(seq, '\n'); - } else - seq_printf(seq, "<not supported>\n"); - end: - return 0; -} - -static int -acpi_video_bus_POST_info_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_bus_POST_info_seq_show, - PDE(inode)->data); -} - -static int -acpi_video_bus_get_POST(struct acpi_video_bus *video, unsigned long long *id) -{ - int status; - - status = acpi_evaluate_integer(video->device->handle, "_GPD", NULL, id); - - return status; -} - -static int acpi_video_bus_POST_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_video_bus *video = seq->private; - int status; - unsigned long long id; - - - if (!video) - goto end; - - status = acpi_video_bus_get_POST(video, &id); - if (!ACPI_SUCCESS(status)) { - seq_printf(seq, "<not supported>\n"); - goto end; - } - seq_printf(seq, "device POSTed is <%s>\n", device_decode[id & 3]); - - end: - return 0; -} - -static int acpi_video_bus_DOS_seq_show(struct seq_file *seq, void *offset) -{ - struct acpi_video_bus *video = seq->private; - - - seq_printf(seq, "DOS setting: <%d>\n", video->dos_setting); - - return 0; -} - -static int acpi_video_bus_POST_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_bus_POST_seq_show, - PDE(inode)->data); -} - -static int acpi_video_bus_DOS_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_video_bus_DOS_seq_show, PDE(inode)->data); -} - -static int -acpi_video_bus_set_POST(struct acpi_video_bus *video, unsigned long option) -{ - int status; - unsigned long long tmp; - union acpi_object arg0 = { ACPI_TYPE_INTEGER }; - struct acpi_object_list args = { 1, &arg0 }; - - - arg0.integer.value = option; - - status = acpi_evaluate_integer(video->device->handle, "_SPD", - &args, &tmp); - if (ACPI_SUCCESS(status)) - status = tmp ? (-EINVAL) : (AE_OK); - - return status; -} - -static ssize_t -acpi_video_bus_write_POST(struct file *file, - const char __user * buffer, - size_t count, loff_t * data) -{ - int status; - struct seq_file *m = file->private_data; - struct acpi_video_bus *video = m->private; - char str[12] = { 0 }; - unsigned long long opt, options; - - - if (!video || count >= sizeof(str)) - return -EINVAL; - - status = acpi_video_bus_POST_options(video, &options); - if (!ACPI_SUCCESS(status)) - return -EINVAL; - - if (copy_from_user(str, buffer, count)) - return -EFAULT; - - str[count] = 0; - opt = strtoul(str, NULL, 0); - if (opt > 3) - return -EFAULT; - - /* just in case an OEM 'forgot' the motherboard... */ - options |= 1; - - if (options & (1ul << opt)) { - status = acpi_video_bus_set_POST(video, opt); - if (!ACPI_SUCCESS(status)) - return -EFAULT; - - } - - return count; -} - -static ssize_t -acpi_video_bus_write_DOS(struct file *file, - const char __user * buffer, - size_t count, loff_t * data) -{ - int status; - struct seq_file *m = file->private_data; - struct acpi_video_bus *video = m->private; - char str[12] = { 0 }; - unsigned long opt; - - - if (!video || count >= sizeof(str)) - return -EINVAL; - - if (copy_from_user(str, buffer, count)) - return -EFAULT; - - str[count] = 0; - opt = strtoul(str, NULL, 0); - if (opt > 7) - return -EFAULT; - - status = acpi_video_bus_DOS(video, opt & 0x3, (opt & 0x4) >> 2); - - if (!ACPI_SUCCESS(status)) - return -EFAULT; - - return count; -} - -static int acpi_video_bus_add_fs(struct acpi_device *device) -{ - struct acpi_video_bus *video = acpi_driver_data(device); - struct proc_dir_entry *device_dir; - struct proc_dir_entry *entry; - - device_dir = proc_mkdir(acpi_device_bid(device), acpi_video_dir); - if (!device_dir) - return -ENOMEM; - - /* 'info' [R] */ - entry = proc_create_data("info", S_IRUGO, device_dir, - &acpi_video_bus_info_fops, - acpi_driver_data(device)); - if (!entry) - goto err_remove_dir; - - /* 'ROM' [R] */ - entry = proc_create_data("ROM", S_IRUGO, device_dir, - &acpi_video_bus_ROM_fops, - acpi_driver_data(device)); - if (!entry) - goto err_remove_info; - - /* 'POST_info' [R] */ - entry = proc_create_data("POST_info", S_IRUGO, device_dir, - &acpi_video_bus_POST_info_fops, - acpi_driver_data(device)); - if (!entry) - goto err_remove_rom; - - /* 'POST' [R/W] */ - entry = proc_create_data("POST", S_IFREG | S_IRUGO | S_IWUSR, - device_dir, - &acpi_video_bus_POST_fops, - acpi_driver_data(device)); - if (!entry) - goto err_remove_post_info; - - /* 'DOS' [R/W] */ - entry = proc_create_data("DOS", S_IFREG | S_IRUGO | S_IWUSR, - device_dir, - &acpi_video_bus_DOS_fops, - acpi_driver_data(device)); - if (!entry) - goto err_remove_post; - - video->dir = acpi_device_dir(device) = device_dir; - return 0; - - err_remove_post: - remove_proc_entry("POST", device_dir); - err_remove_post_info: - remove_proc_entry("POST_info", device_dir); - err_remove_rom: - remove_proc_entry("ROM", device_dir); - err_remove_info: - remove_proc_entry("info", device_dir); - err_remove_dir: - remove_proc_entry(acpi_device_bid(device), acpi_video_dir); - return -ENOMEM; -} - -static int acpi_video_bus_remove_fs(struct acpi_device *device) -{ - struct proc_dir_entry *device_dir = acpi_device_dir(device); - - if (device_dir) { - remove_proc_entry("info", device_dir); - remove_proc_entry("ROM", device_dir); - remove_proc_entry("POST_info", device_dir); - remove_proc_entry("POST", device_dir); - remove_proc_entry("DOS", device_dir); - remove_proc_entry(acpi_device_bid(device), acpi_video_dir); - acpi_device_dir(device) = NULL; - } - - return 0; -} -#else -static inline int acpi_video_device_add_fs(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_video_device_remove_fs(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_video_bus_add_fs(struct acpi_device *device) -{ - return 0; -} -static inline int acpi_video_bus_remove_fs(struct acpi_device *device) -{ - return 0; -} -#endif /* CONFIG_ACPI_PROCFS */ - -/* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ @@ -1877,8 +1130,6 @@ acpi_video_bus_get_one_device(struct acpi_device *device, list_add_tail(&data->entry, &video->video_device_list); mutex_unlock(&video->device_list_lock); - acpi_video_device_add_fs(device); - return 0; } @@ -2181,8 +1432,6 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device) if (!device || !device->video) return -ENOENT; - acpi_video_device_remove_fs(device->dev); - status = acpi_remove_notify_handler(device->dev->handle, ACPI_DEVICE_NOTIFY, acpi_video_device_notify); @@ -2466,10 +1715,6 @@ static int acpi_video_bus_add(struct acpi_device *device) if (error) goto err_free_video; - error = acpi_video_bus_add_fs(device); - if (error) - goto err_free_video; - mutex_init(&video->device_list_lock); INIT_LIST_HEAD(&video->video_device_list); @@ -2522,7 +1767,6 @@ static int acpi_video_bus_add(struct acpi_device *device) acpi_video_bus_stop_devices(video); acpi_video_bus_put_devices(video); kfree(video->attached_array); - acpi_video_bus_remove_fs(device); err_free_video: kfree(video); device->driver_data = NULL; @@ -2544,7 +1788,6 @@ static int acpi_video_bus_remove(struct acpi_device *device, int type) acpi_video_bus_stop_devices(video); acpi_video_bus_put_devices(video); - acpi_video_bus_remove_fs(device); input_unregister_device(video->input); kfree(video->attached_array); @@ -2584,17 +1827,9 @@ int acpi_video_register(void) return 0; } -#ifdef CONFIG_ACPI_PROCFS - acpi_video_dir = proc_mkdir(ACPI_VIDEO_CLASS, acpi_root_dir); - if (!acpi_video_dir) - return -ENODEV; -#endif - result = acpi_bus_register_driver(&acpi_video_bus); - if (result < 0) { - remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir); + if (result < 0) return -ENODEV; - } /* * When the acpi_video_bus is loaded successfully, increase @@ -2617,10 +1852,6 @@ void acpi_video_unregister(void) } acpi_bus_unregister_driver(&acpi_video_bus); -#ifdef CONFIG_ACPI_PROCFS - remove_proc_entry(ACPI_VIDEO_CLASS, acpi_root_dir); -#endif - register_count = 0; return; diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index c5fef01b3c95..b83676126598 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -59,8 +59,8 @@ acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, "support\n")); *cap |= ACPI_VIDEO_BACKLIGHT; if (ACPI_FAILURE(acpi_get_handle(handle, "_BQC", &h_dummy))) - printk(KERN_WARNING FW_BUG PREFIX "ACPI brightness " - "control misses _BQC function\n"); + printk(KERN_WARNING FW_BUG PREFIX "No _BQC method, " + "cannot determine initial brightness\n"); /* We have backlight support, no need to scan further */ return AE_CTRL_TERMINATE; } |