diff options
Diffstat (limited to 'block')
| -rw-r--r-- | block/blk-cgroup.c | 4 | ||||
| -rw-r--r-- | block/blk-core.c | 265 | ||||
| -rw-r--r-- | block/cfq-iosched.c | 7 | ||||
| -rw-r--r-- | block/deadline-iosched.c | 2 | ||||
| -rw-r--r-- | block/elevator.c | 26 | ||||
| -rw-r--r-- | block/partitions/efi.c | 4 |
6 files changed, 229 insertions, 79 deletions
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index b2b9837f9dd3..e8918ffaf96d 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -972,10 +972,10 @@ int blkcg_activate_policy(struct request_queue *q, if (!new_blkg) return -ENOMEM; - preloaded = !radix_tree_preload(GFP_KERNEL); - blk_queue_bypass_start(q); + preloaded = !radix_tree_preload(GFP_KERNEL); + /* * Make sure the root blkg exists and count the existing blkgs. As * @q is bypassing at this point, blkg_lookup_create() can't be diff --git a/block/blk-core.c b/block/blk-core.c index 7c288358a745..33c33bc99ddd 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -30,6 +30,7 @@ #include <linux/list_sort.h> #include <linux/delay.h> #include <linux/ratelimit.h> +#include <linux/pm_runtime.h> #define CREATE_TRACE_POINTS #include <trace/events/block.h> @@ -159,20 +160,10 @@ static void req_bio_endio(struct request *rq, struct bio *bio, else if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) error = -EIO; - if (unlikely(nbytes > bio->bi_size)) { - printk(KERN_ERR "%s: want %u bytes done, %u left\n", - __func__, nbytes, bio->bi_size); - nbytes = bio->bi_size; - } - if (unlikely(rq->cmd_flags & REQ_QUIET)) set_bit(BIO_QUIET, &bio->bi_flags); - bio->bi_size -= nbytes; - bio->bi_sector += (nbytes >> 9); - - if (bio_integrity(bio)) - bio_integrity_advance(bio, nbytes); + bio_advance(bio, nbytes); /* don't actually finish bio if it's part of flush sequence */ if (bio->bi_size == 0 && !(rq->cmd_flags & REQ_FLUSH_SEQ)) @@ -1264,6 +1255,16 @@ void part_round_stats(int cpu, struct hd_struct *part) } EXPORT_SYMBOL_GPL(part_round_stats); +#ifdef CONFIG_PM_RUNTIME +static void blk_pm_put_request(struct request *rq) +{ + if (rq->q->dev && !(rq->cmd_flags & REQ_PM) && !--rq->q->nr_pending) + pm_runtime_mark_last_busy(rq->q->dev); +} +#else +static inline void blk_pm_put_request(struct request *rq) {} +#endif + /* * queue lock must be held */ @@ -1274,6 +1275,8 @@ void __blk_put_request(struct request_queue *q, struct request *req) if (unlikely(--req->ref_count)) return; + blk_pm_put_request(req); + elv_completed_request(q, req); /* this is a bio leak */ @@ -1597,7 +1600,7 @@ static void handle_bad_sector(struct bio *bio) printk(KERN_INFO "%s: rw=%ld, want=%Lu, limit=%Lu\n", bdevname(bio->bi_bdev, b), bio->bi_rw, - (unsigned long long)bio->bi_sector + bio_sectors(bio), + (unsigned long long)bio_end_sector(bio), (long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9)); set_bit(BIO_EOF, &bio->bi_flags); @@ -2053,6 +2056,28 @@ static void blk_account_io_done(struct request *req) } } +#ifdef CONFIG_PM_RUNTIME +/* + * Don't process normal requests when queue is suspended + * or in the process of suspending/resuming + */ +static struct request *blk_pm_peek_request(struct request_queue *q, + struct request *rq) +{ + if (q->dev && (q->rpm_status == RPM_SUSPENDED || + (q->rpm_status != RPM_ACTIVE && !(rq->cmd_flags & REQ_PM)))) + return NULL; + else + return rq; +} +#else +static inline struct request *blk_pm_peek_request(struct request_queue *q, + struct request *rq) +{ + return rq; +} +#endif + /** * blk_peek_request - peek at the top of a request queue * @q: request queue to peek at @@ -2075,6 +2100,11 @@ struct request *blk_peek_request(struct request_queue *q) int ret; while ((rq = __elv_next_request(q)) != NULL) { + + rq = blk_pm_peek_request(q, rq); + if (!rq) + break; + if (!(rq->cmd_flags & REQ_STARTED)) { /* * This is the first time the device driver @@ -2253,8 +2283,7 @@ EXPORT_SYMBOL(blk_fetch_request); **/ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes) { - int total_bytes, bio_nbytes, next_idx = 0; - struct bio *bio; + int total_bytes; if (!req->bio) return false; @@ -2300,56 +2329,21 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes) blk_account_io_completion(req, nr_bytes); - total_bytes = bio_nbytes = 0; - while ((bio = req->bio) != NULL) { - int nbytes; + total_bytes = 0; + while (req->bio) { + struct bio *bio = req->bio; + unsigned bio_bytes = min(bio->bi_size, nr_bytes); - if (nr_bytes >= bio->bi_size) { + if (bio_bytes == bio->bi_size) req->bio = bio->bi_next; - nbytes = bio->bi_size; - req_bio_endio(req, bio, nbytes, error); - next_idx = 0; - bio_nbytes = 0; - } else { - int idx = bio->bi_idx + next_idx; - if (unlikely(idx >= bio->bi_vcnt)) { - blk_dump_rq_flags(req, "__end_that"); - printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n", - __func__, idx, bio->bi_vcnt); - break; - } + req_bio_endio(req, bio, bio_bytes, error); - nbytes = bio_iovec_idx(bio, idx)->bv_len; - BIO_BUG_ON(nbytes > bio->bi_size); + total_bytes += bio_bytes; + nr_bytes -= bio_bytes; - /* - * not a complete bvec done - */ - if (unlikely(nbytes > nr_bytes)) { - bio_nbytes += nr_bytes; - total_bytes += nr_bytes; - break; - } - - /* - * advance to the next vector - */ - next_idx++; - bio_nbytes += nbytes; - } - - total_bytes += nbytes; - nr_bytes -= nbytes; - - bio = req->bio; - if (bio) { - /* - * end more in this run, or just return 'not-done' - */ - if (unlikely(nr_bytes <= 0)) - break; - } + if (!nr_bytes) + break; } /* @@ -2365,16 +2359,6 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes) return false; } - /* - * if the request wasn't completed, update state - */ - if (bio_nbytes) { - req_bio_endio(req, bio, bio_nbytes, error); - bio->bi_idx += next_idx; - bio_iovec(bio)->bv_offset += nr_bytes; - bio_iovec(bio)->bv_len -= nr_bytes; - } - req->__data_len -= total_bytes; req->buffer = bio_data(req->bio); @@ -3046,6 +3030,149 @@ void blk_finish_plug(struct blk_plug *plug) } EXPORT_SYMBOL(blk_finish_plug); +#ifdef CONFIG_PM_RUNTIME +/** + * blk_pm_runtime_init - Block layer runtime PM initialization routine + * @q: the queue of the device + * @dev: the device the queue belongs to + * + * Description: + * Initialize runtime-PM-related fields for @q and start auto suspend for + * @dev. Drivers that want to take advantage of request-based runtime PM + * should call this function after @dev has been initialized, and its + * request queue @q has been allocated, and runtime PM for it can not happen + * yet(either due to disabled/forbidden or its usage_count > 0). In most + * cases, driver should call this function before any I/O has taken place. + * + * This function takes care of setting up using auto suspend for the device, + * the autosuspend delay is set to -1 to make runtime suspend impossible + * until an updated value is either set by user or by driver. Drivers do + * not need to touch other autosuspend settings. + * + * The block layer runtime PM is request based, so only works for drivers + * that use request as their IO unit instead of those directly use bio's. + */ +void blk_pm_runtime_init(struct request_queue *q, struct device *dev) +{ + q->dev = dev; + q->rpm_status = RPM_ACTIVE; + pm_runtime_set_autosuspend_delay(q->dev, -1); + pm_runtime_use_autosuspend(q->dev); +} +EXPORT_SYMBOL(blk_pm_runtime_init); + +/** + * blk_pre_runtime_suspend - Pre runtime suspend check + * @q: the queue of the device + * + * Description: + * This function will check if runtime suspend is allowed for the device + * by examining if there are any requests pending in the queue. If there + * are requests pending, the device can not be runtime suspended; otherwise, + * the queue's status will be updated to SUSPENDING and the driver can + * proceed to suspend the device. + * + * For the not allowed case, we mark last busy for the device so that + * runtime PM core will try to autosuspend it some time later. + * + * This function should be called near the start of the device's + * runtime_suspend callback. + * + * Return: + * 0 - OK to runtime suspend the device + * -EBUSY - Device should not be runtime suspended + */ +int blk_pre_runtime_suspend(struct request_queue *q) +{ + int ret = 0; + + spin_lock_irq(q->queue_lock); + if (q->nr_pending) { + ret = -EBUSY; + pm_runtime_mark_last_busy(q->dev); + } else { + q->rpm_status = RPM_SUSPENDING; + } + spin_unlock_irq(q->queue_lock); + return ret; +} +EXPORT_SYMBOL(blk_pre_runtime_suspend); + +/** + * blk_post_runtime_suspend - Post runtime suspend processing + * @q: the queue of the device + * @err: return value of the device's runtime_suspend function + * + * Description: + * Update the queue's runtime status according to the return value of the + * device's runtime suspend function and mark last busy for the device so + * that PM core will try to auto suspend the device at a later time. + * + * This function should be called near the end of the device's + * runtime_suspend callback. + */ +void blk_post_runtime_suspend(struct request_queue *q, int err) +{ + spin_lock_irq(q->queue_lock); + if (!err) { + q->rpm_status = RPM_SUSPENDED; + } else { + q->rpm_status = RPM_ACTIVE; + pm_runtime_mark_last_busy(q->dev); + } + spin_unlock_irq(q->queue_lock); +} +EXPORT_SYMBOL(blk_post_runtime_suspend); + +/** + * blk_pre_runtime_resume - Pre runtime resume processing + * @q: the queue of the device + * + * Description: + * Update the queue's runtime status to RESUMING in preparation for the + * runtime resume of the device. + * + * This function should be called near the start of the device's + * runtime_resume callback. + */ +void blk_pre_runtime_resume(struct request_queue *q) +{ + spin_lock_irq(q->queue_lock); + q->rpm_status = RPM_RESUMING; + spin_unlock_irq(q->queue_lock); +} +EXPORT_SYMBOL(blk_pre_runtime_resume); + +/** + * blk_post_runtime_resume - Post runtime resume processing + * @q: the queue of the device + * @err: return value of the device's runtime_resume function + * + * Description: + * Update the queue's runtime status according to the return value of the + * device's runtime_resume function. If it is successfully resumed, process + * the requests that are queued into the device's queue when it is resuming + * and then mark last busy and initiate autosuspend for it. + * + * This function should be called near the end of the device's + * runtime_resume callback. + */ +void blk_post_runtime_resume(struct request_queue *q, int err) +{ + spin_lock_irq(q->queue_lock); + if (!err) { + q->rpm_status = RPM_ACTIVE; + __blk_run_queue(q); + pm_runtime_mark_last_busy(q->dev); + pm_runtime_autosuspend(q->dev); + } else { + q->rpm_status = RPM_SUSPENDED; + } + spin_unlock_irq(q->queue_lock); +} +EXPORT_SYMBOL(blk_post_runtime_resume); +#endif + int __init blk_dev_init(void) { BUILD_BUG_ON(__REQ_NR_BITS > 8 * diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 4f0ade74cfd0..d5cd3131c57a 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2270,11 +2270,8 @@ cfq_find_rq_fmerge(struct cfq_data *cfqd, struct bio *bio) return NULL; cfqq = cic_to_cfqq(cic, cfq_bio_sync(bio)); - if (cfqq) { - sector_t sector = bio->bi_sector + bio_sectors(bio); - - return elv_rb_find(&cfqq->sort_list, sector); - } + if (cfqq) + return elv_rb_find(&cfqq->sort_list, bio_end_sector(bio)); return NULL; } diff --git a/block/deadline-iosched.c b/block/deadline-iosched.c index 90037b5eb17f..ba19a3afab79 100644 --- a/block/deadline-iosched.c +++ b/block/deadline-iosched.c @@ -132,7 +132,7 @@ deadline_merge(struct request_queue *q, struct request **req, struct bio *bio) * check for front merge */ if (dd->front_merges) { - sector_t sector = bio->bi_sector + bio_sectors(bio); + sector_t sector = bio_end_sector(bio); __rq = elv_rb_find(&dd->sort_list[bio_data_dir(bio)], sector); if (__rq) { diff --git a/block/elevator.c b/block/elevator.c index a0ffdd943c98..eba5b04c29b1 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -34,6 +34,7 @@ #include <linux/blktrace_api.h> #include <linux/hash.h> #include <linux/uaccess.h> +#include <linux/pm_runtime.h> #include <trace/events/block.h> @@ -536,6 +537,27 @@ void elv_bio_merged(struct request_queue *q, struct request *rq, e->type->ops.elevator_bio_merged_fn(q, rq, bio); } +#ifdef CONFIG_PM_RUNTIME +static void blk_pm_requeue_request(struct request *rq) +{ + if (rq->q->dev && !(rq->cmd_flags & REQ_PM)) + rq->q->nr_pending--; +} + +static void blk_pm_add_request(struct request_queue *q, struct request *rq) +{ + if (q->dev && !(rq->cmd_flags & REQ_PM) && q->nr_pending++ == 0 && + (q->rpm_status == RPM_SUSPENDED || q->rpm_status == RPM_SUSPENDING)) + pm_request_resume(q->dev); +} +#else +static inline void blk_pm_requeue_request(struct request *rq) {} +static inline void blk_pm_add_request(struct request_queue *q, + struct request *rq) +{ +} +#endif + void elv_requeue_request(struct request_queue *q, struct request *rq) { /* @@ -550,6 +572,8 @@ void elv_requeue_request(struct request_queue *q, struct request *rq) rq->cmd_flags &= ~REQ_STARTED; + blk_pm_requeue_request(rq); + __elv_add_request(q, rq, ELEVATOR_INSERT_REQUEUE); } @@ -572,6 +596,8 @@ void __elv_add_request(struct request_queue *q, struct request *rq, int where) { trace_block_rq_insert(q, rq); + blk_pm_add_request(q, rq); + rq->q = q; if (rq->cmd_flags & REQ_SOFTBARRIER) { diff --git a/block/partitions/efi.c b/block/partitions/efi.c index ff5804e2f1d2..c85fc895ecdb 100644 --- a/block/partitions/efi.c +++ b/block/partitions/efi.c @@ -238,7 +238,7 @@ static gpt_entry *alloc_read_gpt_entries(struct parsed_partitions *state, le32_to_cpu(gpt->sizeof_partition_entry); if (!count) return NULL; - pte = kzalloc(count, GFP_KERNEL); + pte = kmalloc(count, GFP_KERNEL); if (!pte) return NULL; @@ -267,7 +267,7 @@ static gpt_header *alloc_read_gpt_header(struct parsed_partitions *state, gpt_header *gpt; unsigned ssz = bdev_logical_block_size(state->bdev); - gpt = kzalloc(ssz, GFP_KERNEL); + gpt = kmalloc(ssz, GFP_KERNEL); if (!gpt) return NULL; |