diff options
Diffstat (limited to 'arch')
23 files changed, 267 insertions, 393 deletions
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index fe254f886a6e..75eba2ca7881 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -98,8 +98,11 @@ drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/ # them changed. We use .mach to indicate when they were updated # last, otherwise make uses the target directory mtime. + show_mach_symlink = : + quiet_show_mach_symlink = echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach' +silent_show_mach_symlink = : include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf - @echo ' SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach' + @$($(quiet)show_mach_symlink) ifneq ($(KBUILD_SRC),) $(Q)mkdir -p include/asm-$(ARCH) $(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index d59ee1530bd4..ae320dcfedef 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.14 -# Thu Nov 29 17:32:47 2007 +# Linux kernel version: 2.6.22.16 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -116,7 +115,10 @@ CONFIG_PREEMPT_VOLUNTARY=y # Processor and Board Settings # # CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set # CONFIG_BF525 is not set +# CONFIG_BF526 is not set CONFIG_BF527=y # CONFIG_BF531 is not set # CONFIG_BF532 is not set @@ -306,6 +308,7 @@ CONFIG_BFIN_DCACHE=y # CONFIG_BFIN_WB is not set CONFIG_BFIN_WT=y CONFIG_L1_MAX_PIECE=16 +# CONFIG_MPU is not set # # Asynchonous Memory Configuration @@ -354,6 +357,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set # # Networking @@ -496,7 +500,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_MW320D=m CONFIG_MTD_RAM=y CONFIG_MTD_ROM=m # CONFIG_MTD_ABSENT is not set @@ -506,9 +509,6 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_SIZE=0x400000 -CONFIG_EBIU_FLASH_BASE=0x20000000 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -684,7 +684,6 @@ CONFIG_INPUT_MISC=y # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set -# CONFIG_BF53X_PFBUTTONS is not set # CONFIG_TWI_KEYPAD is not set # @@ -702,12 +701,12 @@ CONFIG_INPUT_MISC=y # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set # CONFIG_AD5304 is not set -# CONFIG_BF5xx_TEA5764 is not set -# CONFIG_BF5xx_FBDMA is not set # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -772,7 +771,6 @@ CONFIG_I2C_CHARDEV=m # # I2C Hardware Bus support # -# CONFIG_I2C_BLACKFIN_GPIO is not set CONFIG_I2C_BLACKFIN_TWI=m CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_GPIO is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 811711f59a25..9621caa60b5f 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -322,10 +322,9 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set -# CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -697,7 +696,6 @@ CONFIG_SERIAL_BFIN_DMA=y # CONFIG_SERIAL_BFIN_PIO is not set CONFIG_SERIAL_BFIN_UART0=y # CONFIG_BFIN_UART0_CTSRTS is not set -# CONFIG_SERIAL_BFIN_UART1 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 198f4123af4b..b51e76ce7f4f 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -323,10 +323,9 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set -# CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x80 # # CPU Frequency scaling @@ -714,7 +713,6 @@ CONFIG_SERIAL_BFIN_DMA=y # CONFIG_SERIAL_BFIN_PIO is not set CONFIG_SERIAL_BFIN_UART0=y # CONFIG_BFIN_UART0_CTSRTS is not set -# CONFIG_SERIAL_BFIN_UART1 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index b37ccc681e7a..d45fa535dad7 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -330,10 +330,9 @@ CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set -CONFIG_PM_WAKEUP_GPIO_BY_SIC_IWR=y +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set -# CONFIG_PM_WAKEUP_GPIO_API is not set -CONFIG_PM_WAKEUP_SIC_IWR=0x8 # # CPU Frequency scaling @@ -1013,6 +1012,7 @@ CONFIG_SND_BFIN_AD73311_SE=4 CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC=m CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_MMAP_SUPPORT=y CONFIG_SND_BF5XX_SOC_AC97=m # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index fd702161ef59..c9707f7665ad 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -396,6 +396,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set # # CPU Frequency scaling @@ -1075,6 +1076,7 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_SOC=y CONFIG_SND_BF5XX_SOC=y +CONFIG_SND_MMAP_SUPPORT=y CONFIG_SND_BF5XX_SOC_AC97=y CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y # CONFIG_SND_BF5XX_SOC_WM8750 is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 8546994939fb..4d8a63331309 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -367,6 +367,7 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set # # Networking diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 5453bc3664fc..8fd5d22cec34 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -105,13 +105,14 @@ int request_dma(unsigned int channel, char *device_id) mutex_unlock(&(dma_ch[channel].dmalock)); #ifdef CONFIG_BF54x - if (channel >= CH_UART2_RX && channel <= CH_UART3_TX && - strncmp(device_id, "BFIN_UART", 9) == 0) - dma_ch[channel].regs->peripheral_map |= - (channel - CH_UART2_RX + 0xC); - else - dma_ch[channel].regs->peripheral_map |= - (channel - CH_UART2_RX + 0x6); + if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) { + if (strncmp(device_id, "BFIN_UART", 9) == 0) + dma_ch[channel].regs->peripheral_map |= + (channel - CH_UART2_RX + 0xC); + else + dma_ch[channel].regs->peripheral_map |= + (channel - CH_UART2_RX + 0x6); + } #endif dma_ch[channel].device_id = device_id; diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index 5cf4bdb1df3b..1904d8b53328 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -1,9 +1,9 @@ /* - * bfin_gptimers.c - derived from bf53x_timers.c - * Driver for General Purpose Timer functions on the Blackfin processor + * gptimers.c - Blackfin General Purpose Timer core API * - * Copyright (C) 2005 John DeHority - * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de) + * Copyright (c) 2005-2008 Analog Devices Inc. + * Copyright (C) 2005 John DeHority + * Copyright (C) 2006 Hella Aglaia GmbH (awe@aglaia-gmbh.de) * * Licensed under the GPLv2. */ diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8229b1090eb9..2255c289a714 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -32,6 +32,7 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); u16 _bfin_swrst; +EXPORT_SYMBOL(_bfin_swrst); unsigned long memory_start, memory_end, physical_mem_end; unsigned long reserved_mem_dcache_on; @@ -514,6 +515,7 @@ static __init void memory_setup(void) printk(KERN_INFO "Kernel Managed Memory: %ldMB\n", _ramend >> 20); printk(KERN_INFO "Memory map:\n" + KERN_INFO " fixedcode = 0x%p-0x%p\n" KERN_INFO " text = 0x%p-0x%p\n" KERN_INFO " rodata = 0x%p-0x%p\n" KERN_INFO " bss = 0x%p-0x%p\n" @@ -527,7 +529,8 @@ static __init void memory_setup(void) #if DMA_UNCACHED_REGION > 0 KERN_INFO " DMA Zone = 0x%p-0x%p\n" #endif - , _stext, _etext, + , (void *)FIXED_CODE_START, (void *)FIXED_CODE_END, + _stext, _etext, __start_rodata, __end_rodata, __bss_start, __bss_stop, _sdata, _edata, diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index aed832540b3b..cb01a9de2680 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -147,44 +147,64 @@ SECTIONS __l1_lma_start = .; +#if L1_CODE_LENGTH +# define LDS_L1_CODE *(.l1.text) +#else +# define LDS_L1_CODE +#endif .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs)) { . = ALIGN(4); __stext_l1 = .; - *(.l1.text) - + LDS_L1_CODE . = ALIGN(4); __etext_l1 = .; } +#if L1_DATA_A_LENGTH +# define LDS_L1_A_DATA *(.l1.data) +# define LDS_L1_A_BSS *(.l1.bss) +# define LDS_L1_A_CACHE *(.data_l1.cacheline_aligned) +#else +# define LDS_L1_A_DATA +# define LDS_L1_A_BSS +# define LDS_L1_A_CACHE +#endif .data_l1 L1_DATA_A_START : AT(LOADADDR(.text_l1) + SIZEOF(.text_l1)) { . = ALIGN(4); __sdata_l1 = .; - *(.l1.data) + LDS_L1_A_DATA __edata_l1 = .; . = ALIGN(4); __sbss_l1 = .; - *(.l1.bss) + LDS_L1_A_BSS . = ALIGN(32); - *(.data_l1.cacheline_aligned) + LDS_L1_A_CACHE . = ALIGN(4); __ebss_l1 = .; } +#if L1_DATA_B_LENGTH +# define LDS_L1_B_DATA *(.l1.data.B) +# define LDS_L1_B_BSS *(.l1.bss.B) +#else +# define LDS_L1_B_DATA +# define LDS_L1_B_BSS +#endif .data_b_l1 L1_DATA_B_START : AT(LOADADDR(.data_l1) + SIZEOF(.data_l1)) { . = ALIGN(4); __sdata_b_l1 = .; - *(.l1.data.B) + LDS_L1_B_DATA __edata_b_l1 = .; . = ALIGN(4); __sbss_b_l1 = .; - *(.l1.bss.B) + LDS_L1_B_BSS . = ALIGN(4); __ebss_b_l1 = .; diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 337515fba612..cf4bc0d83355 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -180,8 +180,8 @@ static struct mtd_partition partition_info[] = { }, { .name = "File System", - .offset = 4 * SIZE_1M, - .size = (256 - 4) * SIZE_1M, + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, }, }; @@ -422,11 +422,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { }, { .name = "kernel", .size = 0xe0000, - .offset = 0x20000 + .offset = MTDPART_OFS_APPEND, }, { .name = "file system", - .size = 0x700000, - .offset = 0x00100000, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; @@ -484,13 +484,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) -static struct bfin5xx_spi_chip ad5304_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .enable_dma = 0, @@ -611,17 +604,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) - { - .modalias = "ad5304_spi", - .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .platform_data = NULL, - .controller_data = &ad5304_chip_info, - .mode = SPI_MODE_2, - }, -#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", @@ -818,6 +800,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) &bf5xx_nand_device, @@ -895,6 +890,8 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + + &bfin_gpios_device, }; static int __init stamp_init(void) @@ -921,13 +918,18 @@ void native_machine_restart(char *cmd) bfin_gpio_reset_spi0_ssel1(); } -/* - * Currently the MAC address is saved in Flash by U-Boot - */ -#define FLASH_MAC 0x203f0000 void bfin_get_ether_addr(char *addr) { - *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC); - *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4); + /* the MAC is stored in OTP memory page 0xDF */ + u32 ret; + u64 otp_mac; + u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A; + + ret = otp_read(0xDF, 0x00, &otp_mac); + if (!(ret & 0x1)) { + char *otp_mac_p = (char *)&otp_mac; + for (ret = 0; ret < 6; ++ret) + addr[ret] = otp_mac_p[5 - ret]; + } } EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 2b09aa39f565..241b5a20a36a 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -99,11 +99,11 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { }, { .name = "kernel", .size = 0xe0000, - .offset = 0x20000 + .offset = MTDPART_OFS_APPEND, }, { .name = "file system", - .size = 0x700000, - .offset = 0x00100000, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; @@ -298,6 +298,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include <linux/i2c-gpio.h> @@ -350,6 +363,8 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif + + &bfin_gpios_device, }; static int __init ezkit_init(void) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index a645f6fd091b..b2ac4816ae62 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -112,7 +112,7 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", - .size = 0x20000, + .size = 0x40000, .offset = 0, }, { .name = "Kernel", @@ -160,17 +160,17 @@ static struct platform_device stamp_flash_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", - .size = 0x00020000, + .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { .name = "kernel", .size = 0xe0000, - .offset = 0x20000 + .offset = MTDPART_OFS_APPEND, }, { .name = "file system", - .size = 0x700000, - .offset = 0x00100000, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; @@ -212,13 +212,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) -static struct bfin5xx_spi_chip ad5304_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) static struct bfin5xx_spi_chip spi_mmc_chip_info = { .enable_dma = 1, @@ -308,17 +301,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) - { - .modalias = "ad5304_spi", - .max_speed_hz = 1000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .platform_data = NULL, - .controller_data = &ad5304_chip_info, - .mode = SPI_MODE_2, - }, -#endif #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) { .modalias = "spidev", @@ -457,6 +439,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include <linux/i2c-gpio.h> @@ -518,6 +513,8 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) &i2c_gpio_device, #endif + + &bfin_gpios_device, &stamp_flash_device, }; diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 8a3397db1d21..c95395ba7bfa 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -371,13 +371,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) -static struct bfin5xx_spi_chip ad5304_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .enable_dma = 0, @@ -483,17 +476,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) - { - .modalias = "ad5304_spi", - .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .platform_data = NULL, - .controller_data = &ad5304_chip_info, - .mode = SPI_MODE_2, - }, -#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9e2277e0d25c..ea83148993da 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -128,6 +128,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -343,7 +356,7 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", - .size = 0x20000, + .size = 0x40000, .offset = 0, }, { .name = "Kernel", @@ -351,7 +364,7 @@ static struct mtd_partition stamp_partitions[] = { .offset = MTDPART_OFS_APPEND, }, { .name = "RootFS", - .size = 0x400000 - 0x20000 - 0xE0000 - 0x10000, + .size = 0x400000 - 0x40000 - 0xE0000 - 0x10000, .offset = MTDPART_OFS_APPEND, }, { .name = "MAC Address", @@ -391,17 +404,17 @@ static struct platform_device stamp_flash_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", - .size = 0x00020000, + .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { .name = "kernel", .size = 0xe0000, - .offset = 0x20000 + .offset = MTDPART_OFS_APPEND, }, { .name = "file system", - .size = 0x700000, - .offset = 0x00100000, + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; @@ -459,13 +472,6 @@ static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { }; #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) -static struct bfin5xx_spi_chip ad5304_chip_info = { - .enable_dma = 0, - .bits_per_word = 16, -}; -#endif - #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) static struct bfin5xx_spi_chip spi_ad7877_chip_info = { .enable_dma = 0, @@ -578,17 +584,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) - { - .modalias = "ad5304_spi", - .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 2, - .platform_data = NULL, - .controller_data = &ad5304_chip_info, - .mode = SPI_MODE_2, - }, -#endif #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) { .modalias = "ad7877", @@ -821,6 +816,8 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + + &bfin_gpios_device, &stamp_flash_device, }; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 916e963e83ba..a0950c1fd800 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -285,8 +285,8 @@ static struct mtd_partition partition_info[] = { }, { .name = "File System", - .offset = 4 * SIZE_1M, - .size = (256 - 4) * SIZE_1M, + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, }, }; @@ -333,7 +333,7 @@ static struct platform_device bf54x_sdh_device = { static struct mtd_partition ezkit_partitions[] = { { .name = "Bootloader", - .size = 0x20000, + .size = 0x40000, .offset = 0, }, { .name = "Kernel", @@ -381,8 +381,8 @@ static struct mtd_partition bfin_spi_flash_partitions[] = { .mask_flags = MTD_CAP_ROM }, { .name = "linux kernel", - .size = 0x1c0000, - .offset = 0x40000 + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, } }; @@ -594,6 +594,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -646,6 +659,8 @@ static struct platform_device *ezkit_devices[] __initdata = { #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif + + &bfin_gpios_device, &ezkit_flash_device, }; diff --git a/arch/blackfin/mach-bf548/dma.c b/arch/blackfin/mach-bf548/dma.c index 374803a8d2e8..f5479298bb79 100644 --- a/arch/blackfin/mach-bf548/dma.c +++ b/arch/blackfin/mach-bf548/dma.c @@ -27,6 +27,8 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 74fe258421a5..46222a75321a 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -28,6 +28,7 @@ */ #include <linux/linkage.h> +#include <linux/init.h> #include <asm/blackfin.h> #include <asm/trace.h> #if CONFIG_BFIN_KERNEL_CLOCK @@ -44,10 +45,9 @@ #define INITIAL_STACK 0xFFB01000 -.text +__INIT ENTRY(__start) -ENTRY(__stext) /* R0: argument of command line string, passed from uboot, save it */ R7 = R0; /* Enable Cycle Counter and Nesting Of Interrupts */ @@ -213,6 +213,7 @@ ENTRY(__stext) .LWAIT_HERE: jump .LWAIT_HERE; +ENDPROC(__start) ENTRY(_real_start) [ -- sp ] = reti; @@ -285,6 +286,9 @@ ENTRY(_real_start) call _start_kernel; .L_exit: jump.s .L_exit; +ENDPROC(_real_start) + +__FINIT .section .l1.text #if CONFIG_BFIN_KERNEL_CLOCK @@ -450,6 +454,7 @@ ENTRY(_start_dma_code) SSYNC; RTS; +ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ .data diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 43c1b0982819..d357f648d963 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -223,7 +223,7 @@ static struct platform_device bfin_uart_device = { static struct mtd_partition ezkit_partitions[] = { { .name = "Bootloader", - .size = 0x20000, + .size = 0x40000, .offset = 0, }, { .name = "Kernel", @@ -389,6 +389,19 @@ static struct platform_device bfin_device_gpiokeys = { }; #endif +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) #include <linux/i2c-gpio.h> @@ -446,6 +459,7 @@ static struct platform_device *ezkit_devices[] __initdata = { &isp1362_hcd_device, #endif + &bfin_gpios_device, &ezkit_flash_device, }; diff --git a/arch/blackfin/mach-common/dpmc.S b/arch/blackfin/mach-common/dpmc.S index b80ddd8b232d..9d45aa3265b1 100644 --- a/arch/blackfin/mach-common/dpmc.S +++ b/arch/blackfin/mach-common/dpmc.S @@ -31,140 +31,6 @@ #include <asm/blackfin.h> #include <asm/mach/irq.h> -.text - -ENTRY(_unmask_wdog_wakeup_evt) - [--SP] = ( R7:0, P5:0 ); -#if defined(CONFIG_BF561) - P0.H = hi(SICA_IWR1); - P0.L = lo(SICA_IWR1); -#elif defined(CONFIG_BF54x) || defined(CONFIG_BF52x) - P0.h = HI(SIC_IWR0); - P0.l = LO(SIC_IWR0); -#else - P0.h = HI(SIC_IWR); - P0.l = LO(SIC_IWR); -#endif - R7 = [P0]; -#if defined(CONFIG_BF561) - BITSET(R7, 27); -#else - BITSET(R7,(IRQ_WATCH - IVG7)); -#endif - [P0] = R7; - SSYNC; - - ( R7:0, P5:0 ) = [SP++]; - RTS; - -.LWRITE_TO_STAT: - /* When watch dog timer is enabled, a write to STAT will load the - * contents of CNT to STAT - */ - R7 = 0x0000(z); -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_STAT); - P0.l = LO(WDOGA_STAT); -#else - P0.h = HI(WDOG_STAT); - P0.l = LO(WDOG_STAT); -#endif - [P0] = R7; - SSYNC; - JUMP .LSKIP_WRITE_TO_STAT; - -ENTRY(_program_wdog_timer) - [--SP] = ( R7:0, P5:0 ); -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CNT); - P0.l = LO(WDOGA_CNT); -#else - P0.h = HI(WDOG_CNT); - P0.l = LO(WDOG_CNT); -#endif - [P0] = R0; - SSYNC; - -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CTL); - P0.l = LO(WDOGA_CTL); -#else - P0.h = HI(WDOG_CTL); - P0.l = LO(WDOG_CTL); -#endif - R7 = W[P0](Z); - CC = BITTST(R7,1); - if !CC JUMP .LWRITE_TO_STAT; - CC = BITTST(R7,2); - if !CC JUMP .LWRITE_TO_STAT; - -.LSKIP_WRITE_TO_STAT: -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CTL); - P0.l = LO(WDOGA_CTL); -#else - P0.h = HI(WDOG_CTL); - P0.l = LO(WDOG_CTL); -#endif - R7 = W[P0](Z); - BITCLR(R7,1); /* Enable GP event */ - BITSET(R7,2); - W[P0] = R7.L; - SSYNC; - NOP; - - R7 = W[P0](Z); - BITCLR(R7,4); /* Enable the wdog counter */ - W[P0] = R7.L; - SSYNC; - - ( R7:0, P5:0 ) = [SP++]; - RTS; - -ENTRY(_clear_wdog_wakeup_evt) - [--SP] = ( R7:0, P5:0 ); - -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CTL); - P0.l = LO(WDOGA_CTL); -#else - P0.h = HI(WDOG_CTL); - P0.l = LO(WDOG_CTL); -#endif - R7 = 0x0AD6(Z); - W[P0] = R7.L; - SSYNC; - - R7 = W[P0](Z); - BITSET(R7,15); - W[P0] = R7.L; - SSYNC; - - R7 = W[P0](Z); - BITSET(R7,1); - BITSET(R7,2); - W[P0] = R7.L; - SSYNC; - - ( R7:0, P5:0 ) = [SP++]; - RTS; - -ENTRY(_disable_wdog_timer) - [--SP] = ( R7:0, P5:0 ); -#if defined(CONFIG_BF561) - P0.h = HI(WDOGA_CTL); - P0.l = LO(WDOGA_CTL); -#else - P0.h = HI(WDOG_CTL); - P0.l = LO(WDOG_CTL); -#endif - R7 = 0xAD6(Z); - W[P0] = R7.L; - SSYNC; - ( R7:0, P5:0 ) = [SP++]; - RTS; - -#if !defined(CONFIG_BF561) .section .l1.text @@ -459,10 +325,12 @@ ENTRY(_set_sic_iwr) RTS; ENTRY(_set_rtc_istat) +#ifndef CONFIG_BF561 P0.H = hi(RTC_ISTAT); P0.L = lo(RTC_ISTAT); w[P0] = R0.L; SSYNC; +#endif RTS; ENTRY(_test_pll_locked) @@ -473,4 +341,3 @@ ENTRY(_test_pll_locked) CC = BITTST(R0,5); IF !CC JUMP 1b; RTS; -#endif diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 880595afe98d..225ef14af75e 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -74,7 +74,7 @@ unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */ #endif struct ivgx { - /* irq number for request_irq, available in mach-bf533/irq.h */ + /* irq number for request_irq, available in mach-bf5xx/irq.h */ unsigned int irqno; /* corresponding bit in the SIC_ISR register */ unsigned int isrflag; @@ -86,7 +86,6 @@ struct ivg_slice { struct ivgx *istop; } ivg7_13[IVG13 - IVG7 + 1]; -static void search_IAR(void); /* * Search SIC_IAR and fill tables with the irqvalues @@ -120,10 +119,10 @@ static void __init search_IAR(void) } /* - * This is for BF533 internal IRQs + * This is for core internal IRQs */ -static void ack_noop(unsigned int irq) +static void bfin_ack_noop(unsigned int irq) { /* Dummy function. */ } @@ -156,11 +155,11 @@ static void bfin_internal_mask_irq(unsigned int irq) { #ifdef CONFIG_BF53x bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & - ~(1 << (irq - (IRQ_CORETMR + 1)))); + ~(1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; - mask_bank = (irq - (IRQ_CORETMR + 1)) / 32; - mask_bit = (irq - (IRQ_CORETMR + 1)) % 32; + mask_bank = SIC_SYSIRQ(irq) / 32; + mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & ~(1 << mask_bit)); #endif @@ -171,11 +170,11 @@ static void bfin_internal_unmask_irq(unsigned int irq) { #ifdef CONFIG_BF53x bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | - (1 << (irq - (IRQ_CORETMR + 1)))); + (1 << SIC_SYSIRQ(irq))); #else unsigned mask_bank, mask_bit; - mask_bank = (irq - (IRQ_CORETMR + 1)) / 32; - mask_bit = (irq - (IRQ_CORETMR + 1)) % 32; + mask_bank = SIC_SYSIRQ(irq) / 32; + mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | (1 << mask_bit)); #endif @@ -187,8 +186,8 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) { unsigned bank, bit; unsigned long flags; - bank = (irq - (IRQ_CORETMR + 1)) / 32; - bit = (irq - (IRQ_CORETMR + 1)) % 32; + bank = SIC_SYSIRQ(irq) / 32; + bit = SIC_SYSIRQ(irq) % 32; local_irq_save(flags); @@ -204,15 +203,18 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state) #endif static struct irq_chip bfin_core_irqchip = { - .ack = ack_noop, + .ack = bfin_ack_noop, .mask = bfin_core_mask_irq, .unmask = bfin_core_unmask_irq, }; static struct irq_chip bfin_internal_irqchip = { - .ack = ack_noop, + .ack = bfin_ack_noop, .mask = bfin_internal_mask_irq, .unmask = bfin_internal_unmask_irq, + .mask_ack = bfin_internal_mask_irq, + .disable = bfin_internal_mask_irq, + .enable = bfin_internal_unmask_irq, #ifdef CONFIG_PM .set_wake = bfin_internal_set_wake, #endif @@ -221,38 +223,23 @@ static struct irq_chip bfin_internal_irqchip = { #ifdef BF537_GENERIC_ERROR_INT_DEMUX static int error_int_mask; -static void bfin_generic_error_ack_irq(unsigned int irq) -{ - -} - static void bfin_generic_error_mask_irq(unsigned int irq) { error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR)); - if (!error_int_mask) { - local_irq_disable(); - bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & - ~(1 << (IRQ_GENERIC_ERROR - - (IRQ_CORETMR + 1)))); - SSYNC(); - local_irq_enable(); - } + if (!error_int_mask) + bfin_internal_mask_irq(IRQ_GENERIC_ERROR); } static void bfin_generic_error_unmask_irq(unsigned int irq) { - local_irq_disable(); - bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 << - (IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1))); - SSYNC(); - local_irq_enable(); - + bfin_internal_unmask_irq(IRQ_GENERIC_ERROR); error_int_mask |= 1L << (irq - IRQ_PPI_ERROR); } static struct irq_chip bfin_generic_error_irqchip = { - .ack = bfin_generic_error_ack_irq, + .ack = bfin_ack_noop, + .mask_ack = bfin_generic_error_mask_irq, .mask = bfin_generic_error_mask_irq, .unmask = bfin_generic_error_unmask_irq, }; @@ -608,7 +595,7 @@ static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = { (struct pin_int_t *)PINT3_MASK_SET, }; -unsigned short get_irq_base(u8 bank, u8 bmap) +inline unsigned short get_irq_base(u8 bank, u8 bmap) { u16 irq_base; @@ -969,17 +956,12 @@ int __init init_arch_irq(void) #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) bfin_write_SIC_IMASK0(SIC_UNMASK_ALL); bfin_write_SIC_IMASK1(SIC_UNMASK_ALL); - bfin_write_SIC_IWR0(IWR_ENABLE_ALL); - bfin_write_SIC_IWR1(IWR_ENABLE_ALL); # ifdef CONFIG_BF54x bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); - bfin_write_SIC_IWR2(IWR_ENABLE_ALL); # endif #else bfin_write_SIC_IMASK(SIC_UNMASK_ALL); - bfin_write_SIC_IWR(IWR_ENABLE_ALL); #endif - SSYNC(); local_irq_disable(); @@ -1001,90 +983,53 @@ int __init init_arch_irq(void) set_irq_chip(irq, &bfin_core_irqchip); else set_irq_chip(irq, &bfin_internal_irqchip); -#ifdef BF537_GENERIC_ERROR_INT_DEMUX - if (irq != IRQ_GENERIC_ERROR) { -#endif - switch (irq) { + switch (irq) { #if defined(CONFIG_BF53x) - case IRQ_PROG_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_PROG_INTA: # if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) - case IRQ_MAC_RX: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_MAC_RX: # endif #elif defined(CONFIG_BF54x) - case IRQ_PINT0: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PINT1: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PINT2: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PINT3: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_PINT0: + case IRQ_PINT1: + case IRQ_PINT2: + case IRQ_PINT3: #elif defined(CONFIG_BF52x) - case IRQ_PORTF_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PORTG_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PORTH_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_PORTF_INTA: + case IRQ_PORTG_INTA: + case IRQ_PORTH_INTA: #elif defined(CONFIG_BF561) - case IRQ_PROG0_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PROG1_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; - case IRQ_PROG2_INTA: - set_irq_chained_handler(irq, - bfin_demux_gpio_irq); - break; + case IRQ_PROG0_INTA: + case IRQ_PROG1_INTA: + case IRQ_PROG2_INTA: #endif - default: - set_irq_handler(irq, handle_simple_irq); - break; - } - + set_irq_chained_handler(irq, + bfin_demux_gpio_irq); + break; #ifdef BF537_GENERIC_ERROR_INT_DEMUX - } else { + case IRQ_GENERIC_ERROR: set_irq_handler(irq, bfin_demux_error_irq); - } + + break; #endif + default: + set_irq_handler(irq, handle_simple_irq); + break; + } } + #ifdef BF537_GENERIC_ERROR_INT_DEMUX - for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) { - set_irq_chip(irq, &bfin_generic_error_irqchip); - set_irq_handler(irq, handle_level_irq); - } + for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) + set_irq_chip_and_handler(irq, &bfin_generic_error_irqchip, + handle_level_irq); #endif - for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) { + /* if configured as edge, then will be changed to do_edge_IRQ */ + for (irq = GPIO_IRQ_BASE; irq < NR_IRQS; irq++) + set_irq_chip_and_handler(irq, &bfin_gpio_irqchip, + handle_level_irq); - set_irq_chip(irq, &bfin_gpio_irqchip); - /* if configured as edge, then will be changed to do_edge_IRQ */ - set_irq_handler(irq, handle_level_irq); - } bfin_write_IMASK(0); CSYNC(); @@ -1106,6 +1051,16 @@ int __init init_arch_irq(void) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; +#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) + bfin_write_SIC_IWR0(IWR_ENABLE_ALL); + bfin_write_SIC_IWR1(IWR_ENABLE_ALL); +# ifdef CONFIG_BF54x + bfin_write_SIC_IWR2(IWR_ENABLE_ALL); +# endif +#else + bfin_write_SIC_IWR(IWR_ENABLE_ALL); +#endif + return 0; } @@ -1122,7 +1077,6 @@ void do_irq(int vec, struct pt_regs *fp) #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) unsigned long sic_status[3]; - SSYNC(); sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); #ifdef CONFIG_BF54x @@ -1138,7 +1092,7 @@ void do_irq(int vec, struct pt_regs *fp) } #else unsigned long sic_status; - SSYNC(); + sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); for (;; ivg++) { diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index 1f516c55bde6..ec3141fefd20 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -181,7 +181,7 @@ void __init mem_init(void) } } -static __init void free_init_pages(const char *what, unsigned long begin, unsigned long end) +static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end) { unsigned long addr; /* next to check that the page we free is not a partial page */ @@ -203,7 +203,7 @@ void __init free_initrd_mem(unsigned long start, unsigned long end) } #endif -void __init free_initmem(void) +void __init_refok free_initmem(void) { #if defined CONFIG_RAMKERNEL && !defined CONFIG_MPU free_init_pages("unused kernel memory", |