diff options
Diffstat (limited to 'arch')
65 files changed, 755 insertions, 341 deletions
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index b4f95c2bbf74..72a9b3fc4251 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -13,4 +13,83 @@ / { model = "IGEP COM AM335x on AQUILA Expansion"; compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx"; + + hdmi { + compatible = "ti,tilcdc,slave"; + i2c = <&i2c0>; + pinctrl-names = "default", "off"; + pinctrl-0 = <&nxp_hdmi_pins>; + pinctrl-1 = <&nxp_hdmi_off_pins>; + status = "okay"; + }; + + leds_base { + pinctrl-names = "default"; + pinctrl-0 = <&leds_base_pins>; + + compatible = "gpio-leds"; + + led@0 { + label = "base:red:user"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; /* gpio1_21 */ + default-state = "off"; + }; + + led@1 { + label = "base:green:user"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; /* gpio2_0 */ + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + nxp_hdmi_pins: pinmux_nxp_hdmi_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + >; + }; + nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { + pinctrl-single,pins = < + 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + >; + }; + + leds_base_pins: pinmux_leds_base_pins { + pinctrl-single,pins = < + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + >; + }; +}; + +&lcdc { + status = "okay"; +}; + +&i2c0 { + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; }; diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index 619624479311..7063311a58d9 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -199,6 +199,35 @@ pinctrl-0 = <&uart0_pins>; }; +&usb { + status = "okay"; + + control@44e10000 { + status = "okay"; + }; + + usb-phy@47401300 { + status = "okay"; + }; + + usb-phy@47401b00 { + status = "okay"; + }; + + usb@47401000 { + status = "okay"; + }; + + usb@47401800 { + status = "okay"; + dr_mode = "host"; + }; + + dma-controller@07402000 { + status = "okay"; + }; +}; + #include "tps65910.dtsi" &tps { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 90ce29dbe119..08a56bcfc724 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -99,22 +99,22 @@ spi-max-frequency = <50000000>; }; }; + }; - pcie-controller { + pcie-controller { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 1, Lane 0 */ status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 00d6a798c705..7f10f627ae5b 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -118,7 +118,7 @@ coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21810 0x1c>; + reg = <0x20200 0xb0>, <0x21010 0x1c>; }; serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 3f5e6121c730..98335fb34b7a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -47,7 +47,7 @@ /* * MV78230 has 2 PCIe units Gen2.0: One unit can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x1 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -62,10 +62,10 @@ ranges = <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -74,8 +74,8 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -145,20 +145,20 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 3e9fd1353f89..66609684d41b 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -48,7 +48,7 @@ /* * MV78260 has 3 PCIe units Gen2.0: Two units can be * configured as x4 or quad x1 lanes. One unit is - * x4/x1. + * x4 only. */ pcie-controller { compatible = "marvell,armada-xp-pcie"; @@ -68,7 +68,9 @@ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ @@ -77,10 +79,18 @@ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ - 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ - 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; pcie@1,0 { device_type = "pci"; @@ -106,8 +116,8 @@ #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; interrupt-map-mask = <0 0 0 0>; interrupt-map = <0 0 0 0 &mpic 59>; marvell,pcie-port = <0>; @@ -150,37 +160,88 @@ status = "disabled"; }; - pcie@9,0 { + pcie@5,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; marvell,pcie-lane = <0>; - clocks = <&gateclk 26>; + clocks = <&gateclk 9>; status = "disabled"; }; - pcie@10,0 { + pcie@6,0 { device_type = "pci"; - assigned-addresses = <0x82000800 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; + assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 - 0x81000000 0 0 0x81000000 0xa 0 1 0>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + clocks = <&gateclk 10>; + status = "disabled"; + }; + + pcie@7,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; + reg = <0x3800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 + 0x81000000 0 0 0x81000000 0x7 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 64>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <2>; + clocks = <&gateclk 11>; + status = "disabled"; + }; + + pcie@8,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; + reg = <0x4000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 + 0x81000000 0 0 0x81000000 0x8 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 65>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <3>; + clocks = <&gateclk 12>; + status = "disabled"; + }; + + pcie@9,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; + reg = <0x4800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 + 0x81000000 0 0 0x81000000 0x9 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 99>; + marvell,pcie-port = <2>; marvell,pcie-lane = <0>; - clocks = <&gateclk 27>; + clocks = <&gateclk 26>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi index 2347e9563cef..6801106fa1f8 100644 --- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi +++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi @@ -11,6 +11,10 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + aliases { + serial4 = &usart3; + }; + ahb { apb { pinctrl@fffff400 { diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi index 9c18adf788f7..f577b7df9a29 100644 --- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -44,8 +44,8 @@ gpmc,wr-access-ns = <186>; gpmc,cycle2cycle-samecsen; gpmc,cycle2cycle-diffcsen; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; reg-io-width = <4>; smsc,save-mac-address; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 31a632f7effb..df33a50bc070 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -215,3 +215,10 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&vaux2 { + regulator-name = "usb_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index fa532aaacc68..3ba4a625ea5b 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,6 +61,14 @@ vcc-supply = <&hsusb2_power>; }; + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; + gpio_keys { compatible = "gpio-keys"; @@ -120,6 +128,12 @@ reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -178,3 +192,10 @@ mode = <3>; power = <50>; }; + +&vaux2 { + regulator-name = "vdd_ehci"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index ba1e58b7b7e3..165aaf7591ba 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP Technology devices + * Common device tree for IGEP boards based on AM/DM37x * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -10,7 +10,7 @@ */ /dts-v1/; -#include "omap34xx.dtsi" +#include "omap36xx.dtsi" / { memory { @@ -24,6 +24,25 @@ ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; }; + + vdd33: regulator-vdd33 { + compatible = "regulator-fixed"; + regulator-name = "vdd33"; + regulator-always-on; + }; + + lbee1usjyc_vmmc: lbee1usjyc_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&lbee1usjyc_pins>; + compatible = "regulator-fixed"; + regulator-name = "regulator-lbee1usjyc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */ + startup-delay-us = <10000>; + enable-active-high; + vin-supply = <&vdd33>; + }; }; &omap3_pmx_core { @@ -48,6 +67,15 @@ >; }; + /* WiFi/BT combo */ + lbee1usjyc_pins: pinmux_lbee1usjyc_pins { + pinctrl-single,pins = < + 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */ + 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */ + 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */ + >; + }; + mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ @@ -65,10 +93,17 @@ 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ - 0x120 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ - 0x122 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ - 0x124 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ - 0x126 (PIN_INPUT | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; }; @@ -78,10 +113,33 @@ >; }; + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */ + 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + >; + }; + leds_pins: pinmux_leds_pins { }; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; clock-frequency = <2600000>; twl: twl@48 { @@ -101,9 +159,16 @@ #include "twl4030_omap3.dtsi" &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; +}; + &mcbsp2 { pinctrl-names = "default"; pinctrl-0 = <&mcbsp2_pins>; @@ -114,11 +179,15 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - bus-width = <8>; + bus-width = <4>; }; &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&lbee1usjyc_vmmc>; + bus-width = <4>; + non-removable; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index d5cc79267250..1c7e74d2d2bc 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEPv2 board + * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -13,7 +13,7 @@ #include "omap-gpmc-smsc911x.dtsi" / { - model = "IGEPv2"; + model = "IGEPv2 (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0020", "ti,omap3"; leds { @@ -67,6 +67,8 @@ pinctrl-names = "default"; pinctrl-0 = < &hsusbb1_pins + &tfp410_pins + &dss_pins >; hsusbb1_pins: pinmux_hsusbb1_pins { @@ -85,6 +87,45 @@ 0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */ >; }; + + tfp410_pins: tfp410_dvi_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + >; + }; + + dss_pins: pinmux_dss_dvi_pins { + pinctrl-single,pins = < + 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + >; + }; }; &leds_pins { @@ -174,3 +215,8 @@ &usbhsehci { phys = <&hsusb1_phy>; }; + +&vpll2 { + /* Needed for DSS */ + regulator-name = "vdds_dsi"; +}; diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 525e6d9b0978..02a23f8a3384 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for IGEP COM Module + * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x) * * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> @@ -12,7 +12,7 @@ #include "omap3-igep.dtsi" / { - model = "IGEP COM Module"; + model = "IGEP COM MODULE (TI OMAP AM/DM37x)"; compatible = "isee,omap3-igep0030", "ti,omap3"; leds { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index c4f20bfe4cce..c2c306d13b87 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -125,6 +125,21 @@ >; }; + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */ + 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */ + 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */ + >; + }; + display_pins: pinmux_display_pins { pinctrl-single,pins = < 0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */ @@ -358,8 +373,14 @@ cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */ }; +/* most boards use vaux3, only some old versions use vmmc2 instead */ &mmc2 { - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vaux3>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; + non-removable; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index f3a0c26ed0c2..daabf99d402a 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -82,6 +82,13 @@ ranges; ti,hwmods = "l3_main"; + aes: aes@480c5000 { + compatible = "ti,omap3-aes"; + ti,hwmods = "aes"; + reg = <0x480c5000 0x50>; + interrupts = <0>; + }; + counter32k: counter@48320000 { compatible = "ti,omap-counter32k"; reg = <0x48320000 0x20>; @@ -260,6 +267,13 @@ ti,hwmods = "i2c3"; }; + mailbox: mailbox@48094000 { + compatible = "ti,omap3-mailbox"; + ti,hwmods = "mailbox"; + reg = <0x48094000 0x200>; + interrupts = <26>; + }; + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; reg = <0x48098000 0x100>; @@ -357,6 +371,13 @@ dma-names = "tx", "rx"; }; + mmu_isp: mmu@480bd400 { + compatible = "ti,omap3-mmu-isp"; + ti,hwmods = "mmu_isp"; + reg = <0x480bd400 0x80>; + interrupts = <8>; + }; + wdt2: wdt@48314000 { compatible = "ti,omap3-wdt"; reg = <0x48314000 0x80>; @@ -442,6 +463,27 @@ dma-names = "tx", "rx"; }; + sham: sham@480c3000 { + compatible = "ti,omap3-sham"; + ti,hwmods = "sham"; + reg = <0x480c3000 0x64>; + interrupts = <49>; + }; + + smartreflex_core: smartreflex@480cb000 { + compatible = "ti,omap3-smartreflex-core"; + ti,hwmods = "smartreflex_core"; + reg = <0x480cb000 0x400>; + interrupts = <19>; + }; + + smartreflex_mpu_iva: smartreflex@480c9000 { + compatible = "ti,omap3-smartreflex-iva"; + ti,hwmods = "smartreflex_mpu_iva"; + reg = <0x480c9000 0x400>; + interrupts = <18>; + }; + timer1: timer@48318000 { compatible = "ti,omap3430-timer"; reg = <0x48318000 0x400>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 298e85020e1b..88c6a05cab41 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -246,15 +246,6 @@ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */ >; }; -}; - -&omap4_pmx_wkup { - led_wkgpio_pins: pinmux_leds_wkpins { - pinctrl-single,pins = < - 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ - 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ - >; - }; /* * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP @@ -274,7 +265,7 @@ pinctrl-single,pins = < 0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */ 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ @@ -284,6 +275,15 @@ }; }; +&omap4_pmx_wkup { + led_wkgpio_pins: pinmux_leds_wkpins { + pinctrl-single,pins = < + 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */ + 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */ + >; + }; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 5fc3f43c5a81..dbc81fb6ef03 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -300,12 +300,12 @@ wl12xx_pins: pinmux_wl12xx_pins { pinctrl-single,pins = < 0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */ - 0x108 (PIN_OUTPUT | MUX_MODE3) /* sdmmc5_clk.sdmmc5_clk */ - 0x10a (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_cmd.sdmmc5_cmd */ - 0x10c (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat0.sdmmc5_dat0 */ - 0x10e (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat1.sdmmc5_dat1 */ - 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat2.sdmmc5_dat2 */ - 0x112 (PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc5_dat3.sdmmc5_dat3 */ + 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */ + 0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */ + 0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */ + 0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat2.sdmmc5_dat2 */ + 0x112 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat3.sdmmc5_dat3 */ >; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 6d09b8d42fdd..f936476c2753 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -245,14 +245,14 @@ mpu_periph_clk: mpu_periph_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <4>; }; mpu_l2_ram_clk: mpu_l2_ram_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mpuclk>; fixed-divider = <2>; }; @@ -266,8 +266,9 @@ l3_main_clk: l3_main_clk { #clock-cells = <0>; - compatible = "altr,socfpga-gate-clk"; + compatible = "altr,socfpga-perip-clk"; clocks = <&mainclk>; + fixed-divider = <1>; }; l3_mp_clk: l3_mp_clk { diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 4a5903e04827..c1df4e9db140 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -69,6 +69,7 @@ CONFIG_KS8851=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_MDIO_SUN4I=y +CONFIG_TI_CPSW=y CONFIG_KEYBOARD_SPEAR=y CONFIG_SERIO_AMBAKMI=y CONFIG_SERIAL_8250=y @@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_ARMMMCI=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_SDHCI_TEGRA=y CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_EDAC=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 98a50c309b90..bfa80a11e8c7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index d57a85badb5e..3e2259b60236 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -12,6 +12,9 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set @@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS=y +CONFIG_PRINTK_TIME=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index ac632cc38f24..c6ebc184bf68 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_PM_RUNTIME=y @@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_MISC_FILESYSTEMS is not set diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index be956dbf6bae..1571d126e9dd 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t); * mapping to be mapped at. This is particularly important for * non-high vector CPUs. */ -#define FIRST_USER_ADDRESS PAGE_SIZE +#define FIRST_USER_ADDRESS (PAGE_SIZE * 2) /* * Use TASK_SIZE as the ceiling argument for free_pgtables() and diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 57221e349a7c..f0d180d8b29f 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -14,11 +14,12 @@ #include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> +#include <asm/fncpy.h> #include <asm/mach-types.h> #include <asm/smp_plat.h> #include <asm/system_misc.h> -extern const unsigned char relocate_new_kernel[]; +extern void relocate_new_kernel(void); extern const unsigned int relocate_new_kernel_size; extern unsigned long kexec_start_address; @@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image) { unsigned long page_list; unsigned long reboot_code_buffer_phys; + unsigned long reboot_entry = (unsigned long)relocate_new_kernel; + unsigned long reboot_entry_phys; void *reboot_code_buffer; /* @@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image) /* copy our kernel relocation code to the control code page */ - memcpy(reboot_code_buffer, - relocate_new_kernel, relocate_new_kernel_size); + reboot_entry = fncpy(reboot_code_buffer, + reboot_entry, + relocate_new_kernel_size); + reboot_entry_phys = (unsigned long)reboot_entry + + (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer); - - flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); if (kexec_reinit) kexec_reinit(); - soft_restart(reboot_code_buffer_phys); + soft_restart(reboot_entry_phys); } diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index d0cdedf4864d..95858966d84e 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -2,10 +2,12 @@ * relocate_kernel.S - put the kernel image in place to boot */ +#include <linux/linkage.h> #include <asm/kexec.h> - .globl relocate_new_kernel -relocate_new_kernel: + .align 3 /* not needed for this code, but keeps fncpy() happy */ + +ENTRY(relocate_new_kernel) ldr r0,kexec_indirection_page ldr r1,kexec_start_address @@ -79,6 +81,8 @@ kexec_mach_type: kexec_boot_atags: .long 0x0 +ENDPROC(relocate_new_kernel) + relocate_new_kernel_end: .globl relocate_new_kernel_size diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S index 3c5d0f2170fd..b84d0cb13682 100644 --- a/arch/arm/kernel/sigreturn_codes.S +++ b/arch/arm/kernel/sigreturn_codes.S @@ -30,6 +30,27 @@ * snippets. */ +/* + * In CPU_THUMBONLY case kernel arm opcodes are not allowed. + * Note in this case codes skips those instructions but it uses .org + * directive to keep correct layout of sigreturn_codes array. + */ +#ifndef CONFIG_CPU_THUMBONLY +#define ARM_OK(code...) code +#else +#define ARM_OK(code...) +#endif + + .macro arm_slot n + .org sigreturn_codes + 12 * (\n) +ARM_OK( .arm ) + .endm + + .macro thumb_slot n + .org sigreturn_codes + 12 * (\n) + 8 + .thumb + .endm + #if __LINUX_ARM_ARCH__ <= 4 /* * Note we manually set minimally required arch that supports @@ -45,26 +66,27 @@ .global sigreturn_codes .type sigreturn_codes, #object - .arm + .align sigreturn_codes: /* ARM sigreturn syscall code snippet */ - mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) - swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) + arm_slot 0 +ARM_OK( mov r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) ) +ARM_OK( swi #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE) ) /* Thumb sigreturn syscall code snippet */ - .thumb + thumb_slot 0 movs r7, #(__NR_sigreturn - __NR_SYSCALL_BASE) swi #0 /* ARM sigreturn_rt syscall code snippet */ - .arm - mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) - swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) + arm_slot 1 +ARM_OK( mov r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) ) +ARM_OK( swi #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE) ) /* Thumb sigreturn_rt syscall code snippet */ - .thumb + thumb_slot 1 movs r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE) swi #0 @@ -74,7 +96,7 @@ sigreturn_codes: * it is thumb case or not, so we need additional * word after real last entry. */ - .arm + arm_slot 2 .space 4 .size sigreturn_codes, . - sigreturn_codes diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index 36b668d8e121..bc1033b897b4 100644 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 /* * loops = r0 * HZ * loops_per_jiffy / 1000000 */ + .align 3 @ Delay routine ENTRY(__loop_delay) diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index f607deb40f4d..bc7b363a3083 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev) static struct clock_event_device clkevt = { .name = "at91_tick", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, .rating = 150, .set_next_event = clkevt32k_next_event, .set_mode = clkevt32k_mode, @@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void) at91_st_write(AT91_ST_RTMR, 1); /* Setup timer clockevent, with minimum of two ticks (important!!) */ - clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift); - clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt); - clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1; clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt); + clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK, + 2, AT91_ST_ALMV); /* register clocksource */ clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index 3ed190ce062b..c5101dcb4fb0 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -16,7 +16,11 @@ #include <mach/at91_ramc.h> #include <mach/at91rm9200_sdramc.h> +#ifdef CONFIG_PM extern void at91_pm_set_standby(void (*at91_standby)(void)); +#else +static inline void at91_pm_set_standby(void (*at91_standby)(void)) { } +#endif /* * The AT91RM9200 goes into self-refresh mode with this command, and will diff --git a/arch/arm/mach-at91/sama5d3.c b/arch/arm/mach-at91/sama5d3.c index 3ea86428ee09..a28873fe3049 100644 --- a/arch/arm/mach-at91/sama5d3.c +++ b/arch/arm/mach-at91/sama5d3.c @@ -95,19 +95,19 @@ static struct clk twi0_clk = { .name = "twi0_clk", .pid = SAMA5D3_ID_TWI0, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi1_clk = { .name = "twi1_clk", .pid = SAMA5D3_ID_TWI1, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk twi2_clk = { .name = "twi2_clk", .pid = SAMA5D3_ID_TWI2, .type = CLK_TYPE_PERIPHERAL, - .div = AT91_PMC_PCR_DIV2, + .div = AT91_PMC_PCR_DIV8, }; static struct clk mmc0_clk = { .name = "mci0_clk", diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 2739ca2c1334..e0091685fd48 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <video/vga.h> #include <asm/pgtable.h> #include <asm/page.h> @@ -196,6 +197,8 @@ void __init footbridge_map_io(void) iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); } + + vga_base = PCIMEM_BASE; } void footbridge_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 3490a24f969e..7c2fdae9a38b 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,7 +18,6 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> -#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> @@ -291,7 +290,6 @@ void __init dc21285_preinit(void) int cfn_mode; pcibios_min_mem = 0x81000000; - vga_base = PCIMEM_BASE; mem_size = (unsigned int)high_memory - PAGE_OFFSET; for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index b08243500e2e..1a7235fb52ac 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -30,21 +30,24 @@ static const struct { const char *name; const char *trigger; } ebsa285_leds[] = { - { "ebsa285:amber", "heartbeat", }, - { "ebsa285:green", "cpu0", }, + { "ebsa285:amber", "cpu0", }, + { "ebsa285:green", "heartbeat", }, { "ebsa285:red",}, }; +static unsigned char hw_led_state; + static void ebsa285_led_set(struct led_classdev *cdev, enum led_brightness b) { struct ebsa285_led *led = container_of(cdev, struct ebsa285_led, cdev); - if (b != LED_OFF) - *XBUS_LEDS |= led->mask; + if (b == LED_OFF) + hw_led_state |= led->mask; else - *XBUS_LEDS &= ~led->mask; + hw_led_state &= ~led->mask; + *XBUS_LEDS = hw_led_state; } static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) @@ -52,18 +55,19 @@ static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) struct ebsa285_led *led = container_of(cdev, struct ebsa285_led, cdev); - return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF; + return hw_led_state & led->mask ? LED_OFF : LED_FULL; } static int __init ebsa285_leds_init(void) { int i; - if (machine_is_ebsa285()) + if (!machine_is_ebsa285()) return -ENODEV; - /* 3 LEDS All ON */ - *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED; + /* 3 LEDS all off */ + hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED; + *XBUS_LEDS = hw_led_state; for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) { struct ebsa285_led *led; diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 365bfd3d9c68..dadccc91488c 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void) static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { .name = "dvi", .source = "tfp410.0", - .i2c_bus_num = 3, + .i2c_bus_num = 2, }; static struct platform_device omap3_igep2_dvi_connector_device = { diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 10c71450cf63..39f020c982e8 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { static struct pdata_init pdata_quirks[] __initdata = { #ifdef CONFIG_ARCH_OMAP3 + { "nokia,omap3-n900", hsmmc2_internal_input_clk, }, { "nokia,omap3-n9", hsmmc2_internal_input_clk, }, { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020", omap3_igep0020_legacy_init, }, diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index e233dfcbc186..93a2a6e4260f 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -128,7 +128,8 @@ skip_voltdm: for (i = 0; i < pwrdm->banks; i++) pwrdm->ret_mem_off_counter[i] = 0; - arch_pwrdm->pwrdm_wait_transition(pwrdm); + if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition) + arch_pwrdm->pwrdm_wait_transition(pwrdm); pwrdm->state = pwrdm_read_pwrst(pwrdm); pwrdm->state_counter[pwrdm->state] = 1; diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 037100a1563a..aee77f06f887 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -10,6 +10,7 @@ config ARCH_SOCFPGA select GENERIC_CLOCKEVENTS select GPIO_PL061 if GPIOLIB select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP select HAVE_SMP select MFD_SYSCON select SPARSE_IRQ diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 2e85c1e72535..12c7e5c03ea4 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, "ux500-msp-i2s.0", &msp0_platform_data), OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 79f8b39801a8..f6b6bfa88ecf 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -9,6 +9,7 @@ * * DMA uncached mapping support. */ +#include <linux/bootmem.h> #include <linux/module.h> #include <linux/mm.h> #include <linux/gfp.h> @@ -162,6 +163,8 @@ static u64 get_coherent_dma_mask(struct device *dev) u64 mask = (u64)DMA_BIT_MASK(32); if (dev) { + unsigned long max_dma_pfn; + mask = dev->coherent_dma_mask; /* @@ -173,6 +176,8 @@ static u64 get_coherent_dma_mask(struct device *dev) return 0; } + max_dma_pfn = min(max_pfn, arm_dma_pfn_limit); + /* * If the mask allows for more memory than we can address, * and we actually have that much memory, then fail the @@ -180,7 +185,7 @@ static u64 get_coherent_dma_mask(struct device *dev) */ if (sizeof(mask) != sizeof(dma_addr_t) && mask > (dma_addr_t)~0 && - dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) { + dma_to_pfn(dev, ~0) > max_dma_pfn) { dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n", mask); dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n"); @@ -192,7 +197,7 @@ static u64 get_coherent_dma_mask(struct device *dev) * fits within the allowable addresses which we can * allocate. */ - if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) { + if (dma_to_pfn(dev, mask) < max_dma_pfn) { dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n", mask, dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1, diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index d27158c38eb0..5e85ed371364 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, info.flags = VM_UNMAPPED_AREA_TOPDOWN; info.length = len; - info.low_limit = PAGE_SIZE; + info.low_limit = FIRST_USER_ADDRESS; info.high_limit = mm->mmap_base; info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0; info.align_offset = pgoff << PAGE_SHIFT; diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 0acb089d0f70..1046b373d1ae 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm) init_pud = pud_offset(init_pgd, 0); init_pmd = pmd_offset(init_pud, 0); init_pte = pte_offset_map(init_pmd, 0); - set_pte_ext(new_pte, *init_pte, 0); + set_pte_ext(new_pte + 0, init_pte[0], 0); + set_pte_ext(new_pte + 1, init_pte[1], 0); pte_unmap(init_pte); pte_unmap(new_pte); } diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index fb92abb91628..2861b155485a 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer) if (timer->posted) return; - if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) + if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) { + timer->posted = OMAP_TIMER_NONPOSTED; + __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0); return; + } __omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, OMAP_TIMER_CTRL_POSTED, 0); diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index 23732cdff551..b31ee1b275b0 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -25,8 +25,9 @@ struct xen_p2m_entry { struct rb_node rbnode_phys; }; -rwlock_t p2m_lock; +static rwlock_t p2m_lock; struct rb_root phys_to_mach = RB_ROOT; +EXPORT_SYMBOL_GPL(phys_to_mach); static struct rb_root mach_to_phys = RB_ROOT; static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new) @@ -200,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn) } EXPORT_SYMBOL_GPL(__set_phys_to_machine); -int p2m_init(void) +static int p2m_init(void) { rwlock_init(&p2m_lock); return 0; diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig index ec1b014952b6..acacd348df89 100644 --- a/arch/parisc/configs/c3000_defconfig +++ b/arch/parisc/configs/c3000_defconfig @@ -50,7 +50,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_SIIMAGE=m +CONFIG_PATA_SIL680=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=y diff --git a/arch/parisc/configs/c8000_defconfig b/arch/parisc/configs/c8000_defconfig index e1c8d2015c89..8249ac9d9cfc 100644 --- a/arch/parisc/configs/c8000_defconfig +++ b/arch/parisc/configs/c8000_defconfig @@ -20,7 +20,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_PA8X00=y -CONFIG_MLONGCALLS=y CONFIG_64BIT=y CONFIG_SMP=y CONFIG_PREEMPT=y @@ -81,8 +80,6 @@ CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_PLATFORM=y CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_SIIMAGE=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m @@ -94,6 +91,8 @@ CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=m CONFIG_ISCSI_TCP=m CONFIG_ISCSI_BOOT_SYSFS=m +CONFIG_ATA=y +CONFIG_PATA_SIL680=y CONFIG_FUSION=y CONFIG_FUSION_SPI=y CONFIG_FUSION_SAS=y @@ -114,9 +113,8 @@ CONFIG_INPUT_FF_MEMLESS=m # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL is not set -CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_PS2 is not set CONFIG_INPUT_MISC=y -CONFIG_INPUT_CM109=m CONFIG_SERIO_SERPORT=m CONFIG_SERIO_PARKBD=m CONFIG_SERIO_GSCPS2=m @@ -167,34 +165,6 @@ CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_AD1889=m # CONFIG_SND_USB is not set # CONFIG_SND_GSC is not set -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_HID_EZKEY=m -CONFIG_HID_KYE=m -CONFIG_HID_GYRATION=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_GREENASIA=m -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_HID_ZEROPLUS=m -CONFIG_USB_HID=m CONFIG_USB=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y diff --git a/arch/parisc/configs/generic-64bit_defconfig b/arch/parisc/configs/generic-64bit_defconfig index 5874cebee077..28c1b5de044e 100644 --- a/arch/parisc/configs/generic-64bit_defconfig +++ b/arch/parisc/configs/generic-64bit_defconfig @@ -24,7 +24,6 @@ CONFIG_MODVERSIONS=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set CONFIG_PA8X00=y -CONFIG_MLONGCALLS=y CONFIG_64BIT=y CONFIG_SMP=y # CONFIG_COMPACTION is not set @@ -68,7 +67,6 @@ CONFIG_IDE_GD=m CONFIG_IDE_GD_ATAPI=y CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_NS87415=y -CONFIG_BLK_DEV_SIIMAGE=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y @@ -82,6 +80,7 @@ CONFIG_SCSI_ZALON=y CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_DH=y CONFIG_ATA=y +CONFIG_PATA_SIL680=y CONFIG_ATA_GENERIC=y CONFIG_MD=y CONFIG_MD_LINEAR=m @@ -162,7 +161,7 @@ CONFIG_SLIP_MODE_SLIP6=y CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_HIL_OLD is not set # CONFIG_KEYBOARD_HIL is not set -# CONFIG_INPUT_MOUSE is not set +# CONFIG_MOUSE_PS2 is not set CONFIG_INPUT_MISC=y CONFIG_SERIO_SERPORT=m # CONFIG_HP_SDC is not set @@ -216,32 +215,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set -CONFIG_HID=m CONFIG_HIDRAW=y -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_KYE=m -CONFIG_HID_GYRATION=m -CONFIG_HID_TWINHAN=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_HID_NTRIG=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TOPSEED=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_USB_HID=m CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y CONFIG_USB=y @@ -251,13 +225,8 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_MON=m CONFIG_USB_WUSB_CBAF=m CONFIG_USB_XHCI_HCD=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y diff --git a/arch/parisc/include/asm/serial.h b/arch/parisc/include/asm/serial.h index d7e3cc60dbc3..77e9b67c87ee 100644 --- a/arch/parisc/include/asm/serial.h +++ b/arch/parisc/include/asm/serial.h @@ -6,5 +6,3 @@ * This is used for 16550-compatible UARTs */ #define BASE_BAUD ( 1843200 / 16 ) - -#define SERIAL_PORT_DFNS diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c index 06cb3992907e..608716f8496b 100644 --- a/arch/parisc/kernel/hardware.c +++ b/arch/parisc/kernel/hardware.c @@ -36,6 +36,9 @@ * HP PARISC Hardware Database * Access to this database is only possible during bootup * so don't reference this table after starting the init process + * + * NOTE: Product names which are listed here and ends with a '?' + * are guessed. If you know the correct name, please let us know. */ static struct hp_hardware hp_hardware_list[] = { @@ -222,7 +225,7 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"}, {HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"}, {HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"}, - {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"}, + {HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+ (rp5470)?"}, {HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"}, {HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"}, {HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"}, @@ -276,9 +279,11 @@ static struct hp_hardware hp_hardware_list[] = { {HPHW_NPROC,0x888,0x4,0x91,"Storm Peak Fast DC-"}, {HPHW_NPROC,0x889,0x4,0x91,"Storm Peak Fast"}, {HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak Slow"}, + {HPHW_NPROC,0x88B,0x4,0x91,"Crestone Peak Fast?"}, {HPHW_NPROC,0x88C,0x4,0x91,"Orca Mako+"}, {HPHW_NPROC,0x88D,0x4,0x91,"Rainier/Medel Mako+ Slow"}, {HPHW_NPROC,0x88E,0x4,0x91,"Rainier/Medel Mako+ Fast"}, + {HPHW_NPROC,0x892,0x4,0x91,"Mt. Hamilton Slow Mako+?"}, {HPHW_NPROC,0x894,0x4,0x91,"Mt. Hamilton Fast Mako+"}, {HPHW_NPROC,0x895,0x4,0x91,"Storm Peak Slow Mako+"}, {HPHW_NPROC,0x896,0x4,0x91,"Storm Peak Fast Mako+"}, diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index d2d58258aea6..d4dc588c0dc1 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -41,9 +41,7 @@ END(boot_args) .import fault_vector_11,code /* IVA parisc 1.1 32 bit */ .import $global$ /* forward declaration */ #endif /*!CONFIG_64BIT*/ - .export _stext,data /* Kernel want it this way! */ -_stext: -ENTRY(stext) +ENTRY(parisc_kernel_start) .proc .callinfo @@ -347,7 +345,7 @@ smp_slave_stext: .procend #endif /* CONFIG_SMP */ -ENDPROC(stext) +ENDPROC(parisc_kernel_start) #ifndef CONFIG_64BIT .section .data..read_mostly diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index 5dfd248e3f1a..0d3a9d4927b5 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -61,8 +61,15 @@ static int get_offset(struct address_space *mapping) return (unsigned long) mapping >> 8; } -static unsigned long get_shared_area(struct address_space *mapping, - unsigned long addr, unsigned long len, unsigned long pgoff) +static unsigned long shared_align_offset(struct file *filp, unsigned long pgoff) +{ + struct address_space *mapping = filp ? filp->f_mapping : NULL; + + return (get_offset(mapping) + pgoff) << PAGE_SHIFT; +} + +static unsigned long get_shared_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff) { struct vm_unmapped_area_info info; @@ -71,7 +78,7 @@ static unsigned long get_shared_area(struct address_space *mapping, info.low_limit = PAGE_ALIGN(addr); info.high_limit = TASK_SIZE; info.align_mask = PAGE_MASK & (SHMLBA - 1); - info.align_offset = (get_offset(mapping) + pgoff) << PAGE_SHIFT; + info.align_offset = shared_align_offset(filp, pgoff); return vm_unmapped_area(&info); } @@ -82,20 +89,18 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, return -ENOMEM; if (flags & MAP_FIXED) { if ((flags & MAP_SHARED) && - (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) + (addr - shared_align_offset(filp, pgoff)) & (SHMLBA - 1)) return -EINVAL; return addr; } if (!addr) addr = TASK_UNMAPPED_BASE; - if (filp) { - addr = get_shared_area(filp->f_mapping, addr, len, pgoff); - } else if(flags & MAP_SHARED) { - addr = get_shared_area(NULL, addr, len, pgoff); - } else { + if (filp || (flags & MAP_SHARED)) + addr = get_shared_area(filp, addr, len, pgoff); + else addr = get_unshared_area(addr, len); - } + return addr; } diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 76ed62ed785b..ddd988b267a9 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -168,7 +168,7 @@ void unwind_table_remove(struct unwind_table *table) } /* Called from setup_arch to import the kernel unwind info */ -int unwind_init(void) +int __init unwind_init(void) { long start, stop; register unsigned long gp __asm__ ("r27"); @@ -233,7 +233,6 @@ static void unwind_frame_regs(struct unwind_frame_info *info) e = find_unwind_entry(info->ip); if (e == NULL) { unsigned long sp; - extern char _stext[], _etext[]; dbg("Cannot find unwind entry for 0x%lx; forced unwinding\n", info->ip); @@ -281,8 +280,7 @@ static void unwind_frame_regs(struct unwind_frame_info *info) break; info->prev_ip = tmp; sp = info->prev_sp; - } while (info->prev_ip < (unsigned long)_stext || - info->prev_ip > (unsigned long)_etext); + } while (!kernel_text_address(info->prev_ip)); info->rp = 0; @@ -435,9 +433,8 @@ unsigned long return_address(unsigned int level) do { if (unwind_once(&info) < 0 || info.ip == 0) return 0; - if (!__kernel_text_address(info.ip)) { + if (!kernel_text_address(info.ip)) return 0; - } } while (info.ip && level--); return info.ip; diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 4bb095a2f6fc..0dacc5ca555a 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -6,24 +6,19 @@ * Copyright (C) 2000 Michael Ang <mang with subcarrier.org> * Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org> * Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org> - * Copyright (C) 2006 Helge Deller <deller@gmx.de> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * Copyright (C) 2006-2013 Helge Deller <deller@gmx.de> + */ + +/* + * Put page table entries (swapper_pg_dir) as the first thing in .bss. This + * will ensure that it has .bss alignment (PAGE_SIZE). */ +#define BSS_FIRST_SECTIONS *(.data..vm0.pmd) \ + *(.data..vm0.pgd) \ + *(.data..vm0.pte) + #include <asm-generic/vmlinux.lds.h> + /* needed for the processor specific cache alignment size */ #include <asm/cache.h> #include <asm/page.h> @@ -39,7 +34,7 @@ OUTPUT_FORMAT("elf64-hppa-linux") OUTPUT_ARCH(hppa:hppa2.0w) #endif -ENTRY(_stext) +ENTRY(parisc_kernel_start) #ifndef CONFIG_64BIT jiffies = jiffies_64 + 4; #else @@ -49,11 +44,29 @@ SECTIONS { . = KERNEL_BINARY_TEXT_START; + __init_begin = .; + HEAD_TEXT_SECTION + INIT_TEXT_SECTION(8) + + . = ALIGN(PAGE_SIZE); + INIT_DATA_SECTION(PAGE_SIZE) + /* we have to discard exit text and such at runtime, not link time */ + .exit.text : + { + EXIT_TEXT + } + .exit.data : + { + EXIT_DATA + } + PERCPU_SECTION(8) + . = ALIGN(PAGE_SIZE); + __init_end = .; + /* freed after init ends here */ + _text = .; /* Text and read-only data */ - .head ALIGN(16) : { - HEAD_TEXT - } = 0 - .text ALIGN(16) : { + _stext = .; + .text ALIGN(PAGE_SIZE) : { TEXT_TEXT SCHED_TEXT LOCK_TEXT @@ -68,21 +81,28 @@ SECTIONS *(.lock.text) /* out-of-line lock text */ *(.gnu.warning) } - /* End of text section */ + . = ALIGN(PAGE_SIZE); _etext = .; + /* End of text section */ /* Start of data section */ _sdata = .; - RODATA + RO_DATA_SECTION(8) - /* writeable */ - /* Make sure this is page aligned so - * that we can properly leave these - * as writable - */ - . = ALIGN(PAGE_SIZE); - data_start = .; +#ifdef CONFIG_64BIT + . = ALIGN(16); + /* Linkage tables */ + .opd : { + *(.opd) + } PROVIDE (__gp = .); + .plt : { + *(.plt) + } + .dlt : { + *(.dlt) + } +#endif /* unwind info */ .PARISC.unwind : { @@ -91,7 +111,15 @@ SECTIONS __stop___unwind = .; } - EXCEPTION_TABLE(16) + /* writeable */ + /* Make sure this is page aligned so + * that we can properly leave these + * as writable + */ + . = ALIGN(PAGE_SIZE); + data_start = .; + + EXCEPTION_TABLE(8) NOTES /* Data */ @@ -107,54 +135,8 @@ SECTIONS _edata = .; /* BSS */ - __bss_start = .; - /* page table entries need to be PAGE_SIZE aligned */ - . = ALIGN(PAGE_SIZE); - .data..vmpages : { - *(.data..vm0.pmd) - *(.data..vm0.pgd) - *(.data..vm0.pte) - } - .bss : { - *(.bss) - *(COMMON) - } - __bss_stop = .; - -#ifdef CONFIG_64BIT - . = ALIGN(16); - /* Linkage tables */ - .opd : { - *(.opd) - } PROVIDE (__gp = .); - .plt : { - *(.plt) - } - .dlt : { - *(.dlt) - } -#endif + BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8) - /* reserve space for interrupt stack by aligning __init* to 16k */ - . = ALIGN(16384); - __init_begin = .; - INIT_TEXT_SECTION(16384) - . = ALIGN(PAGE_SIZE); - INIT_DATA_SECTION(16) - /* we have to discard exit text and such at runtime, not link time */ - .exit.text : - { - EXIT_TEXT - } - .exit.data : - { - EXIT_DATA - } - - PERCPU_SECTION(L1_CACHE_BYTES) - . = ALIGN(PAGE_SIZE); - __init_end = .; - /* freed after init ends here */ _end = . ; STABS_DEBUG diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index b0f96c0e6316..96f8168cf4ec 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -32,6 +32,7 @@ #include <asm/sections.h> extern int data_start; +extern void parisc_kernel_start(void); /* Kernel entry point in head.S */ #if PT_NLEVELS == 3 /* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout @@ -324,8 +325,9 @@ static void __init setup_bootmem(void) reserve_bootmem_node(NODE_DATA(0), 0UL, (unsigned long)(PAGE0->mem_free + PDC_CONSOLE_IO_IODC_SIZE), BOOTMEM_DEFAULT); - reserve_bootmem_node(NODE_DATA(0), __pa((unsigned long)_text), - (unsigned long)(_end - _text), BOOTMEM_DEFAULT); + reserve_bootmem_node(NODE_DATA(0), __pa(KERNEL_BINARY_TEXT_START), + (unsigned long)(_end - KERNEL_BINARY_TEXT_START), + BOOTMEM_DEFAULT); reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT), ((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT), BOOTMEM_DEFAULT); @@ -378,6 +380,17 @@ static void __init setup_bootmem(void) request_resource(&sysram_resources[0], &pdcdata_resource); } +static int __init parisc_text_address(unsigned long vaddr) +{ + static unsigned long head_ptr __initdata; + + if (!head_ptr) + head_ptr = PAGE_MASK & (unsigned long) + dereference_function_descriptor(&parisc_kernel_start); + + return core_kernel_text(vaddr) || vaddr == head_ptr; +} + static void __init map_pages(unsigned long start_vaddr, unsigned long start_paddr, unsigned long size, pgprot_t pgprot, int force) @@ -466,7 +479,7 @@ static void __init map_pages(unsigned long start_vaddr, */ if (force) pte = __mk_pte(address, pgprot); - else if (core_kernel_text(vaddr) && + else if (parisc_text_address(vaddr) && address != fv_addr) pte = __mk_pte(address, PAGE_KERNEL_EXEC); else diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 4363528dc8fd..b3feabd39f31 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -55,8 +55,7 @@ struct pcc_param { struct s390_xts_ctx { u8 key[32]; - u8 xts_param[16]; - struct pcc_param pcc; + u8 pcc_key[32]; long enc; long dec; int key_len; @@ -591,7 +590,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, xts_ctx->enc = KM_XTS_128_ENCRYPT; xts_ctx->dec = KM_XTS_128_DECRYPT; memcpy(xts_ctx->key + 16, in_key, 16); - memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16); + memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16); break; case 48: xts_ctx->enc = 0; @@ -602,7 +601,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, xts_ctx->enc = KM_XTS_256_ENCRYPT; xts_ctx->dec = KM_XTS_256_DECRYPT; memcpy(xts_ctx->key, in_key, 32); - memcpy(xts_ctx->pcc.key, in_key + 32, 32); + memcpy(xts_ctx->pcc_key, in_key + 32, 32); break; default: *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; @@ -621,29 +620,33 @@ static int xts_aes_crypt(struct blkcipher_desc *desc, long func, unsigned int nbytes = walk->nbytes; unsigned int n; u8 *in, *out; - void *param; + struct pcc_param pcc_param; + struct { + u8 key[32]; + u8 init[16]; + } xts_param; if (!nbytes) goto out; - memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block)); - memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit)); - memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts)); - memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak)); - param = xts_ctx->pcc.key + offset; - ret = crypt_s390_pcc(func, param); + memset(pcc_param.block, 0, sizeof(pcc_param.block)); + memset(pcc_param.bit, 0, sizeof(pcc_param.bit)); + memset(pcc_param.xts, 0, sizeof(pcc_param.xts)); + memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak)); + memcpy(pcc_param.key, xts_ctx->pcc_key, 32); + ret = crypt_s390_pcc(func, &pcc_param.key[offset]); if (ret < 0) return -EIO; - memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16); - param = xts_ctx->key + offset; + memcpy(xts_param.key, xts_ctx->key, 32); + memcpy(xts_param.init, pcc_param.xts, 16); do { /* only use complete blocks */ n = nbytes & ~(AES_BLOCK_SIZE - 1); out = walk->dst.virt.addr; in = walk->src.virt.addr; - ret = crypt_s390_km(func, param, out, in, n); + ret = crypt_s390_km(func, &xts_param.key[offset], out, in, n); if (ret < 0 || ret != n) return -EIO; diff --git a/arch/um/Makefile b/arch/um/Makefile index 48d92bbe62e9..36e658a4291c 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -33,12 +33,11 @@ MODE_INCLUDE += -I$(srctree)/$(ARCH_DIR)/include/shared/skas HEADER_ARCH := $(SUBARCH) -# Additional ARCH settings for x86 -ifeq ($(SUBARCH),i386) - HEADER_ARCH := x86 +ifneq ($(filter $(SUBARCH),x86 x86_64 i386),) + HEADER_ARCH := x86 endif -ifeq ($(SUBARCH),x86_64) - HEADER_ARCH := x86 + +ifdef CONFIG_64BIT KBUILD_CFLAGS += -mcmodel=large endif diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index 4d6fdf68edf3..799d7e413bf5 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -19,7 +19,7 @@ struct stack_frame { unsigned long return_address; }; -static void print_stack_trace(unsigned long *sp, unsigned long bp) +static void do_stack_trace(unsigned long *sp, unsigned long bp) { int reliable; unsigned long addr; @@ -94,5 +94,5 @@ void show_stack(struct task_struct *task, unsigned long *stack) } printk(KERN_CONT "\n"); - print_stack_trace(sp, bp); + do_stack_trace(sp, bp); } diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 41250fb33985..eda00f9be0cf 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -31,6 +31,9 @@ ifeq ($(CONFIG_X86_32),y) KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + # Don't autogenerate SSE instructions + KBUILD_CFLAGS += -mno-sse + # Never want PIC in a 32-bit kernel, prevent breakage with GCC built # with nonstandard options KBUILD_CFLAGS += -fno-pic @@ -57,8 +60,11 @@ else KBUILD_AFLAGS += -m64 KBUILD_CFLAGS += -m64 + # Don't autogenerate SSE instructions + KBUILD_CFLAGS += -mno-sse + # Use -mpreferred-stack-boundary=3 if supported. - KBUILD_CFLAGS += $(call cc-option,-mno-sse -mpreferred-stack-boundary=3) + KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3) # FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu) cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8) diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h index da31c8b8a92d..b17f4f48ecd7 100644 --- a/arch/x86/include/asm/atomic.h +++ b/arch/x86/include/asm/atomic.h @@ -77,7 +77,7 @@ static inline void atomic_sub(int i, atomic_t *v) */ static inline int atomic_sub_and_test(int i, atomic_t *v) { - GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, i, "%0", "e"); + GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, "er", i, "%0", "e"); } /** @@ -141,7 +141,7 @@ static inline int atomic_inc_and_test(atomic_t *v) */ static inline int atomic_add_negative(int i, atomic_t *v) { - GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, i, "%0", "s"); + GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, "er", i, "%0", "s"); } /** diff --git a/arch/x86/include/asm/atomic64_64.h b/arch/x86/include/asm/atomic64_64.h index 3f065c985aee..46e9052bbd28 100644 --- a/arch/x86/include/asm/atomic64_64.h +++ b/arch/x86/include/asm/atomic64_64.h @@ -72,7 +72,7 @@ static inline void atomic64_sub(long i, atomic64_t *v) */ static inline int atomic64_sub_and_test(long i, atomic64_t *v) { - GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, i, "%0", "e"); + GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, "er", i, "%0", "e"); } /** @@ -138,7 +138,7 @@ static inline int atomic64_inc_and_test(atomic64_t *v) */ static inline int atomic64_add_negative(long i, atomic64_t *v) { - GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, i, "%0", "s"); + GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, "er", i, "%0", "s"); } /** diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index 6d76d0935989..9fc1af74dc83 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -205,7 +205,7 @@ static inline void change_bit(long nr, volatile unsigned long *addr) */ static inline int test_and_set_bit(long nr, volatile unsigned long *addr) { - GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, nr, "%0", "c"); + GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, "Ir", nr, "%0", "c"); } /** @@ -251,7 +251,7 @@ static inline int __test_and_set_bit(long nr, volatile unsigned long *addr) */ static inline int test_and_clear_bit(long nr, volatile unsigned long *addr) { - GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, nr, "%0", "c"); + GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, "Ir", nr, "%0", "c"); } /** @@ -304,7 +304,7 @@ static inline int __test_and_change_bit(long nr, volatile unsigned long *addr) */ static inline int test_and_change_bit(long nr, volatile unsigned long *addr) { - GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, nr, "%0", "c"); + GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, "Ir", nr, "%0", "c"); } static __always_inline int constant_test_bit(long nr, const volatile unsigned long *addr) diff --git a/arch/x86/include/asm/local.h b/arch/x86/include/asm/local.h index 5b23e605e707..4ad6560847b1 100644 --- a/arch/x86/include/asm/local.h +++ b/arch/x86/include/asm/local.h @@ -52,7 +52,7 @@ static inline void local_sub(long i, local_t *l) */ static inline int local_sub_and_test(long i, local_t *l) { - GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, i, "%0", "e"); + GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, "er", i, "%0", "e"); } /** @@ -92,7 +92,7 @@ static inline int local_inc_and_test(local_t *l) */ static inline int local_add_negative(long i, local_t *l) { - GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, i, "%0", "s"); + GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, "er", i, "%0", "s"); } /** diff --git a/arch/x86/include/asm/rmwcc.h b/arch/x86/include/asm/rmwcc.h index 1ff990f1de8e..8f7866a5b9a4 100644 --- a/arch/x86/include/asm/rmwcc.h +++ b/arch/x86/include/asm/rmwcc.h @@ -16,8 +16,8 @@ cc_label: \ #define GEN_UNARY_RMWcc(op, var, arg0, cc) \ __GEN_RMWcc(op " " arg0, var, cc) -#define GEN_BINARY_RMWcc(op, var, val, arg0, cc) \ - __GEN_RMWcc(op " %1, " arg0, var, cc, "er" (val)) +#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc) \ + __GEN_RMWcc(op " %1, " arg0, var, cc, vcon (val)) #else /* !CC_HAVE_ASM_GOTO */ @@ -33,8 +33,8 @@ do { \ #define GEN_UNARY_RMWcc(op, var, arg0, cc) \ __GEN_RMWcc(op " " arg0, var, cc) -#define GEN_BINARY_RMWcc(op, var, val, arg0, cc) \ - __GEN_RMWcc(op " %2, " arg0, var, cc, "er" (val)) +#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc) \ + __GEN_RMWcc(op " %2, " arg0, var, cc, vcon (val)) #endif /* CC_HAVE_ASM_GOTO */ diff --git a/arch/x86/include/asm/trace/irq_vectors.h b/arch/x86/include/asm/trace/irq_vectors.h index 2874df24e7a4..4cab890007a7 100644 --- a/arch/x86/include/asm/trace/irq_vectors.h +++ b/arch/x86/include/asm/trace/irq_vectors.h @@ -72,6 +72,17 @@ DEFINE_IRQ_VECTOR_EVENT(x86_platform_ipi); DEFINE_IRQ_VECTOR_EVENT(irq_work); /* + * We must dis-allow sampling irq_work_exit() because perf event sampling + * itself can cause irq_work, which would lead to an infinite loop; + * + * 1) irq_work_exit happens + * 2) generates perf sample + * 3) generates irq_work + * 4) goto 1 + */ +TRACE_EVENT_PERF_PERM(irq_work_exit, is_sampling_event(p_event) ? -EPERM : 0); + +/* * call_function - called when entering/exiting a call function interrupt * vector handler */ diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index da3c599584a3..c752cb43e52f 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -558,6 +558,17 @@ void native_machine_shutdown(void) { /* Stop the cpus and apics */ #ifdef CONFIG_X86_IO_APIC + /* + * Disabling IO APIC before local APIC is a workaround for + * erratum AVR31 in "Intel Atom Processor C2000 Product Family + * Specification Update". In this situation, interrupts that target + * a Logical Processor whose Local APIC is either in the process of + * being hardware disabled or software disabled are neither delivered + * nor discarded. When this erratum occurs, the processor may hang. + * + * Even without the erratum, it still makes sense to quiet IO APIC + * before disabling Local APIC. + */ disable_IO_APIC(); #endif diff --git a/arch/x86/platform/efi/early_printk.c b/arch/x86/platform/efi/early_printk.c index 6599a0027b76..81b506d5befd 100644 --- a/arch/x86/platform/efi/early_printk.c +++ b/arch/x86/platform/efi/early_printk.c @@ -142,7 +142,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num) efi_y += font->height; } - if (efi_y + font->height >= si->lfb_height) { + if (efi_y + font->height > si->lfb_height) { u32 i; efi_y -= font->height; |