diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/am335x-baltos.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/am335x-evmsk.dts | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/dra7.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/sun8i-a33.dtsi | 12 | ||||
-rw-r--r-- | arch/arm/mach-omap2/common.h | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap-hotplug.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap-mpuss-lowpower.c | 22 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap-smc.S | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap-smp.c | 90 | ||||
-rw-r--r-- | arch/arm/mach-omap2/omap_device.c | 8 | ||||
-rw-r--r-- | arch/arm/mach-orion5x/Kconfig | 1 | ||||
-rw-r--r-- | arch/arm/plat-orion/common.c | 5 | ||||
-rw-r--r-- | arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 |
14 files changed, 124 insertions, 27 deletions
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index efb5eae290a8..d42b98f15e8b 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -371,6 +371,8 @@ phy1: ethernet-phy@1 { reg = <7>; + eee-broken-100tx; + eee-broken-1000t; }; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 9e43c443738a..9ba4b18c0cb2 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -672,6 +672,7 @@ ti,non-removable; bus-width = <4>; cap-power-off-card; + keep-power-in-suspend; pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 2c9e56f4aac5..bbfb9d5a70a9 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -283,6 +283,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; linux,pci-domain = <0>; @@ -319,6 +320,7 @@ device_type = "pci"; ranges = <0x81000000 0 0 0x03000 0 0x00010000 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; linux,pci-domain = <1>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 8f9a69ca818c..efe53998c961 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -121,7 +121,7 @@ &i2c3 { clock-frequency = <400000>; at24@50 { - compatible = "at24,24c02"; + compatible = "atmel,24c64"; readonly; reg = <0x50>; }; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 0467fb365bfc..306af6cadf26 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -66,12 +66,6 @@ opp-microvolt = <1200000>; clock-latency-ns = <244144>; /* 8 32k periods */ }; - - opp@1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1320000>; - clock-latency-ns = <244144>; /* 8 32k periods */ - }; }; cpus { @@ -81,16 +75,22 @@ operating-points-v2 = <&cpu0_opp_table>; }; + cpu@1 { + operating-points-v2 = <&cpu0_opp_table>; + }; + cpu@2 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <2>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@3 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <3>; + operating-points-v2 = <&cpu0_opp_table>; }; }; diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index c4f2ace91ea2..3089d3bfa19b 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -270,6 +270,7 @@ extern const struct smp_operations omap4_smp_ops; extern int omap4_mpuss_init(void); extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state); extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state); +extern u32 omap4_get_cpu1_ns_pa_addr(void); #else static inline int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index d3fb5661bb5d..433db6d0b073 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -50,7 +50,7 @@ void omap4_cpu_die(unsigned int cpu) omap4_hotplug_cpu(cpu, PWRDM_POWER_OFF); if (omap_secure_apis_support()) - boot_cpu = omap_read_auxcoreboot0(); + boot_cpu = omap_read_auxcoreboot0() >> 9; else boot_cpu = readl_relaxed(base + OMAP_AUX_CORE_BOOT_0) >> 5; diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 113ab2dd2ee9..03ec6d307c82 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -64,6 +64,7 @@ #include "prm-regbits-44xx.h" static void __iomem *sar_base; +static u32 old_cpu1_ns_pa_addr; #if defined(CONFIG_PM) && defined(CONFIG_SMP) @@ -212,6 +213,11 @@ static void __init save_l2x0_context(void) {} #endif +u32 omap4_get_cpu1_ns_pa_addr(void) +{ + return old_cpu1_ns_pa_addr; +} + /** * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function * The purpose of this function is to manage low power programming @@ -460,22 +466,30 @@ int __init omap4_mpuss_init(void) void __init omap4_mpuss_early_init(void) { unsigned long startup_pa; + void __iomem *ns_pa_addr; - if (!(cpu_is_omap44xx() || soc_is_omap54xx())) + if (!(soc_is_omap44xx() || soc_is_omap54xx())) return; sar_base = omap4_get_sar_ram_base(); - if (cpu_is_omap443x()) + /* Save old NS_PA_ADDR for validity checks later on */ + if (soc_is_omap44xx()) + ns_pa_addr = sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET; + else + ns_pa_addr = sar_base + OMAP5_CPU1_WAKEUP_NS_PA_ADDR_OFFSET; + old_cpu1_ns_pa_addr = readl_relaxed(ns_pa_addr); + + if (soc_is_omap443x()) startup_pa = __pa_symbol(omap4_secondary_startup); - else if (cpu_is_omap446x()) + else if (soc_is_omap446x()) startup_pa = __pa_symbol(omap4460_secondary_startup); else if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) startup_pa = __pa_symbol(omap5_secondary_hyp_startup); else startup_pa = __pa_symbol(omap5_secondary_startup); - if (cpu_is_omap44xx()) + if (soc_is_omap44xx()) writel_relaxed(startup_pa, sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET); else diff --git a/arch/arm/mach-omap2/omap-smc.S b/arch/arm/mach-omap2/omap-smc.S index fd90125bffc7..72506e6cf9e7 100644 --- a/arch/arm/mach-omap2/omap-smc.S +++ b/arch/arm/mach-omap2/omap-smc.S @@ -94,6 +94,5 @@ ENTRY(omap_read_auxcoreboot0) ldr r12, =0x103 dsb smc #0 - mov r0, r0, lsr #9 ldmfd sp!, {r2-r12, pc} ENDPROC(omap_read_auxcoreboot0) diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 003353b0b794..3faf454ba487 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/irqchip/arm-gic.h> +#include <asm/sections.h> #include <asm/smp_scu.h> #include <asm/virt.h> @@ -40,10 +41,14 @@ #define OMAP5_CORE_COUNT 0x2 +#define AUX_CORE_BOOT0_GP_RELEASE 0x020 +#define AUX_CORE_BOOT0_HS_RELEASE 0x200 + struct omap_smp_config { unsigned long cpu1_rstctrl_pa; void __iomem *cpu1_rstctrl_va; void __iomem *scu_base; + void __iomem *wakeupgen_base; void *startup_addr; }; @@ -140,7 +145,6 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) static struct clockdomain *cpu1_clkdm; static bool booted; static struct powerdomain *cpu1_pwrdm; - void __iomem *base = omap_get_wakeupgen_base(); /* * Set synchronisation state between this boot processor @@ -155,9 +159,11 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) - omap_modify_auxcoreboot0(0x200, 0xfffffdff); + omap_modify_auxcoreboot0(AUX_CORE_BOOT0_HS_RELEASE, + 0xfffffdff); else - writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0); + writel_relaxed(AUX_CORE_BOOT0_GP_RELEASE, + cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_0); if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); @@ -261,9 +267,72 @@ static void __init omap4_smp_init_cpus(void) set_cpu_possible(i, true); } +/* + * For now, just make sure the start-up address is not within the booting + * kernel space as that means we just overwrote whatever secondary_startup() + * code there was. + */ +static bool __init omap4_smp_cpu1_startup_valid(unsigned long addr) +{ + if ((addr >= __pa(PAGE_OFFSET)) && (addr <= __pa(__bss_start))) + return false; + + return true; +} + +/* + * We may need to reset CPU1 before configuring, otherwise kexec boot can end + * up trying to use old kernel startup address or suspend-resume will + * occasionally fail to bring up CPU1 on 4430 if CPU1 fails to enter deeper + * idle states. + */ +static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c) +{ + unsigned long cpu1_startup_pa, cpu1_ns_pa_addr; + bool needs_reset = false; + u32 released; + + if (omap_secure_apis_support()) + released = omap_read_auxcoreboot0() & AUX_CORE_BOOT0_HS_RELEASE; + else + released = readl_relaxed(cfg.wakeupgen_base + + OMAP_AUX_CORE_BOOT_0) & + AUX_CORE_BOOT0_GP_RELEASE; + if (released) { + pr_warn("smp: CPU1 not parked?\n"); + + return; + } + + cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base + + OMAP_AUX_CORE_BOOT_1); + cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr(); + + /* Did the configured secondary_startup() get overwritten? */ + if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa)) + needs_reset = true; + + /* + * If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a + * deeper idle state in WFI and will wake to an invalid address. + */ + if ((soc_is_omap44xx() || soc_is_omap54xx()) && + !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr)) + needs_reset = true; + + if (!needs_reset || !c->cpu1_rstctrl_va) + return; + + pr_info("smp: CPU1 parked within kernel, needs reset (0x%lx 0x%lx)\n", + cpu1_startup_pa, cpu1_ns_pa_addr); + + writel_relaxed(1, c->cpu1_rstctrl_va); + readl_relaxed(c->cpu1_rstctrl_va); + writel_relaxed(0, c->cpu1_rstctrl_va); +} + static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) { - void __iomem *base = omap_get_wakeupgen_base(); const struct omap_smp_config *c = NULL; if (soc_is_omap443x()) @@ -281,6 +350,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) /* Must preserve cfg.scu_base set earlier */ cfg.cpu1_rstctrl_pa = c->cpu1_rstctrl_pa; cfg.startup_addr = c->startup_addr; + cfg.wakeupgen_base = omap_get_wakeupgen_base(); if (soc_is_dra74x() || soc_is_omap54xx()) { if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) @@ -299,15 +369,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) if (cfg.scu_base) scu_enable(cfg.scu_base); - /* - * Reset CPU1 before configuring, otherwise kexec will - * end up trying to use old kernel startup address. - */ - if (cfg.cpu1_rstctrl_va) { - writel_relaxed(1, cfg.cpu1_rstctrl_va); - readl_relaxed(cfg.cpu1_rstctrl_va); - writel_relaxed(0, cfg.cpu1_rstctrl_va); - } + omap4_smp_maybe_reset_cpu1(&cfg); /* * Write the address of secondary startup routine into the @@ -319,7 +381,7 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) omap_auxcoreboot_addr(__pa_symbol(cfg.startup_addr)); else writel_relaxed(__pa_symbol(cfg.startup_addr), - base + OMAP_AUX_CORE_BOOT_1); + cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_1); } const struct smp_operations omap4_smp_ops __initconst = { diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index e920dd83e443..f989145480c8 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -222,6 +222,14 @@ static int _omap_device_notifier_call(struct notifier_block *nb, dev_err(dev, "failed to idle\n"); } break; + case BUS_NOTIFY_BIND_DRIVER: + od = to_omap_device(pdev); + if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED) && + pm_runtime_status_suspended(dev)) { + od->_driver_status = BUS_NOTIFY_BIND_DRIVER; + pm_runtime_set_active(dev); + } + break; case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 633442ad4e4c..2a7bb6ccdcb7 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -6,6 +6,7 @@ menuconfig ARCH_ORION5X select GPIOLIB select MVEBU_MBUS select PCI + select PHYLIB if NETDEVICES select PLAT_ORION_LEGACY help Support for the following Marvell Orion 5x series SoCs: diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 9255b6d67ba5..aff6994950ba 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -468,6 +468,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data, eth_data, &orion_ge11); } +#ifdef CONFIG_ARCH_ORION5X /***************************************************************************** * Ethernet switch ****************************************************************************/ @@ -480,6 +481,9 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d) struct mdio_board_info *bd; unsigned int i; + if (!IS_BUILTIN(CONFIG_PHYLIB)) + return; + for (i = 0; i < ARRAY_SIZE(d->port_names); i++) if (!strcmp(d->port_names[i], "cpu")) break; @@ -493,6 +497,7 @@ void __init orion_ge00_switch_init(struct dsa_chip_data *d) mdiobus_register_board_info(&orion_ge00_switch_board_info, 1); } +#endif /***************************************************************************** * I2C diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 1c64ea2d23f9..0565779e66fa 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -179,8 +179,10 @@ usbphy: phy@01c19400 { compatible = "allwinner,sun50i-a64-usb-phy"; reg = <0x01c19400 0x14>, + <0x01c1a800 0x4>, <0x01c1b800 0x4>; reg-names = "phy_ctrl", + "pmu0", "pmu1"; clocks = <&ccu CLK_USB_PHY0>, <&ccu CLK_USB_PHY1>; |