diff options
Diffstat (limited to 'arch')
618 files changed, 40864 insertions, 14102 deletions
diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index 25da0017ec87..21b1117a0c61 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -1,8 +1,6 @@ #ifndef _ALPHA_FCNTL_H #define _ALPHA_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ #define O_CREAT 01000 /* not fcntl */ #define O_TRUNC 02000 /* not fcntl */ #define O_EXCL 04000 /* not fcntl */ @@ -10,13 +8,28 @@ #define O_NONBLOCK 00004 #define O_APPEND 00010 -#define O_SYNC 040000 +#define O_DSYNC 040000 /* used to be O_SYNC, see below */ #define O_DIRECTORY 0100000 /* must be a directory */ #define O_NOFOLLOW 0200000 /* don't follow links */ #define O_LARGEFILE 0400000 /* will be set by the kernel on every open */ #define O_DIRECT 02000000 /* direct disk access - should check with OSF/1 */ #define O_NOATIME 04000000 #define O_CLOEXEC 010000000 /* set close_on_exec */ +/* + * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * the O_SYNC flag. We continue to use the existing numerical value + * for O_DSYNC semantics now, but using the correct symbolic name for it. + * This new value is used to request true Posix O_SYNC semantics. It is + * defined in this strange way to make sure applications compiled against + * new headers get at least O_DSYNC semantics on older kernels. + * + * This has the nice side-effect that we can simply test for O_DSYNC + * wherever we do not care if O_DSYNC or O_SYNC is used. + * + * Note: __O_SYNC must never be used directly. + */ +#define __O_SYNC 020000000 +#define O_SYNC (__O_SYNC|O_DSYNC) #define F_GETLK 7 #define F_SETLK 8 diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 9a3334ae282e..62619f25132f 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -178,25 +178,18 @@ SYSCALL_DEFINE6(osf_mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, off) { - struct file *file = NULL; - unsigned long ret = -EBADF; + unsigned long ret = -EINVAL; #if 0 if (flags & (_MAP_HASSEMAPHORE | _MAP_INHERIT | _MAP_UNALIGNED)) printk("%s: unimplemented OSF mmap flags %04lx\n", current->comm, flags); #endif - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - down_write(¤t->mm->mmap_sem); - ret = do_mmap(file, addr, len, prot, flags, off); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); + if ((off + PAGE_ALIGN(len)) < off) + goto out; + if (off & ~PAGE_MASK) + goto out; + ret = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); out: return ret; } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf8a99f19dc4..233a222752c0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -603,6 +603,7 @@ config ARCH_SA1100 select ARCH_SPARSEMEM_ENABLE select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ + select CPU_FREQ select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -1359,13 +1360,9 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_SA1100 bool - depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT) - default y config CPU_FREQ_SA1110 bool - depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3) - default y config CPU_FREQ_INTEGRATOR tristate "CPUfreq driver for ARM Integrator CPUs" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index ff54c23d085e..5cb9326df7a7 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -71,6 +71,14 @@ config DEBUG_LL in the kernel. This is helpful if you are debugging code that executes before the console is initialized. +config EARLY_PRINTK + bool "Early printk" + depends on DEBUG_LL + help + Say Y here if you want to have an early console using the + kernel low-level debugging functions. Add earlyprintk to your + kernel parameters to enable this console. + config DEBUG_ICEDCC bool "Kernel low-level debugging via EmbeddedICE DCC channel" depends on DEBUG_LL diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig index 338267674075..1b39691b816f 100644 --- a/arch/arm/configs/htcherald_defconfig +++ b/arch/arm/configs/htcherald_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc6 -# Sat Nov 14 10:56:01 2009 +# Linux kernel version: 2.6.32-rc8 +# Sat Dec 5 12:16:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -198,7 +198,9 @@ CONFIG_ARCH_OMAP1=y # OMAP Feature Selections # # CONFIG_OMAP_RESET_CLOCKS is not set -# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set CONFIG_OMAP_MPU_TIMER=y @@ -207,6 +209,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set # CONFIG_OMAP_LL_DEBUG_NONE is not set +CONFIG_OMAP_SERIAL_WAKE=y # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig new file mode 100644 index 000000000000..7c8515e65c02 --- /dev/null +++ b/arch/arm/configs/omap3_touchbook_defconfig @@ -0,0 +1,2431 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Fri Dec 4 16:02:17 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +CONFIG_MACH_OMAP3_TOUCHBOOK=y +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_OMAP_3630SDP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +# CONFIG_IPV6_PIMSM_V2 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_DEBUG=y +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_BRIDGE_NF_EBTABLES is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +CONFIG_BT_HCIBFUSB=y +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +# CONFIG_RXKAD is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +CONFIG_EEPROM_93CX6=y +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +# CONFIG_DM_MULTIPATH_ST is not set +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# WiMAX Wireless Broadband devices +# +# CONFIG_WIMAX_I2400M_USB is not set +# CONFIG_WIMAX_I2400M_SDIO is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_ATM_DRIVERS is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOATM is not set +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +CONFIG_BATTERY_BQ27x00=y +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_OXU210HP_HCD=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP210X is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +# CONFIG_USB_SERIAL_QUALCOMM is not set +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_ATM is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ZERO_HNPTEST=y +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +CONFIG_USB_MIDI_GADGET=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_OTUS is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 84829587d55a..592457cfbbe5 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -963,10 +963,32 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set -CONFIG_FB_OMAP=y -# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP_LCD_VGA is not set # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2 +CONFIG_OMAP2_VRAM=y +CONFIG_OMAP2_VRFB=y +CONFIG_OMAP2_DSS=y +CONFIG_OMAP2_VRAM_SIZE=4 +CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y +# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_VENC=y +# CONFIG_OMAP2_DSS_SDI is not set +# CONFIG_OMAP2_DSS_DSI is not set +# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set +CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 +CONFIG_FB_OMAP2=y +CONFIG_FB_OMAP2_DEBUG_SUPPORT=y +# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set +CONFIG_FB_OMAP2_NUM_FBS=3 + +# +# OMAP2/3 Display Device Drivers +# +CONFIG_PANEL_GENERIC=y +CONFIG_PANEL_SHARP_LS037V7DW01=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index a464ca332a23..2319113c86bf 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -1,26 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Tue Jun 9 12:36:23 2009 +# Linux kernel version: 2.6.32 +# Sun Dec 6 23:37:45 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_LOCKBREAK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -39,11 +42,12 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -52,8 +56,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED=y is not set -# CONFIG_SYSFS_DEPRECATED_V2=y is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -70,7 +73,6 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,6 +85,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -90,13 +96,16 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -110,7 +119,7 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -131,6 +140,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -142,8 +152,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -166,10 +178,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set # # TI OMAP Implementations @@ -190,9 +205,12 @@ CONFIG_ARCH_OMAP4=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y -CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set -# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y # # OMAP Board Type @@ -207,7 +225,7 @@ CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -222,9 +240,10 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_ARM_THUMB is not set # CONFIG_ARM_THUMBEE is not set # CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_DCACHE_DISABLE=y +# CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -245,18 +264,20 @@ CONFIG_ARM_GIC=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set -CONFIG_LOCAL_TIMERS=y -# CONFIG_PREEMPT is not set +# CONFIG_LOCAL_TIMERS is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -271,10 +292,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -# CONFIG_UNEVICTABLE_LRU is not set CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -298,9 +322,11 @@ CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600 # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y -# CONFIG_NEON is not set +CONFIG_NEON=y # # Userspace binary formats @@ -325,6 +351,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -342,6 +369,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -355,6 +383,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -427,6 +456,11 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -447,11 +481,14 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -472,21 +509,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -511,14 +535,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -535,9 +562,12 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -601,7 +631,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # # Partition Types @@ -673,23 +702,24 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_SOFTLOCKUP is not set CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -708,31 +738,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -754,7 +775,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -796,11 +816,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index eef93627fb13..4b00a4306812 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -610,7 +610,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index f0e7d0f85582..0d7e37a3651b 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -629,7 +629,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig new file mode 100644 index 000000000000..823b11e7091a --- /dev/null +++ b/arch/arm/configs/zeus_defconfig @@ -0,0 +1,2032 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32 +# Tue Dec 8 20:27:05 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=13 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set +# CONFIG_ARCH_U8500 is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# + +# +# Intel/Marvell Dev Platforms (sorted by hardware release time) +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_ZYLONITE300 is not set +# CONFIG_MACH_ZYLONITE320 is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set + +# +# Third Party Dev Platforms (sorted by vendor name) +# +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_ARCH_VIPER is not set +CONFIG_MACH_ARCOM_ZEUS=y +# CONFIG_MACH_BALLOON3 is not set +# CONFIG_MACH_CSB726 is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_EXEDA is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_MACH_INTELMOTE2 is not set +# CONFIG_MACH_STARGATE2 is not set +# CONFIG_MACH_XCEP is not set +# CONFIG_TRIZEPS_PXA is not set +CONFIG_ARCOM_PCMCIA=y +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_COLIBRI300 is not set +# CONFIG_MACH_COLIBRI320 is not set + +# +# End-user Products (sorted by vendor name) +# +# CONFIG_MACH_H4700 is not set +# CONFIG_MACH_H5000 is not set +# CONFIG_MACH_HIMALAYA is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_PXA_EZX is not set +# CONFIG_MACH_MP900C is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +CONFIG_PXA_HAVE_BOARD_IRQS=y +CONFIG_PXA_HAVE_ISA_IRQS=y +CONFIG_PLAT_PXA=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_LEGACY=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +CONFIG_ISA=y +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=m +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_PCMCIA_SOC_COMMON=m +CONFIG_PCMCIA_PXA2XX=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA_PROBE=y + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=m +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +# CONFIG_BT_SCO is not set +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +# CONFIG_BT_BNEP_MC_FILTER is not set +# CONFIG_BT_BNEP_PROTO_FILTER is not set +# CONFIG_BT_HIDP is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +CONFIG_WIRELESS_EXT=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_WEXT_SPY=y +CONFIG_WEXT_PRIV=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_CFG80211_WEXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +CONFIG_MTD_PXA2XX=y +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_IMPA7 is not set +# CONFIG_MTD_GPIO_ADDR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_PNP is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +# CONFIG_SATA_PMP is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +# CONFIG_PATA_LEGACY is not set +CONFIG_PATA_PCMCIA=m +# CONFIG_PATA_QDI is not set +# CONFIG_PATA_WINBOND_VLB is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_SMC91X is not set +CONFIG_DM9000=y +CONFIG_DM9000_DEBUGLEVEL=4 +# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_DNET is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_CS89x0 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set +CONFIG_WLAN=y +# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_HOSTAP is not set +# CONFIG_IWM is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_HERMES_CACHE_FW_ON_INIT=y +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set +# CONFIG_P54_COMMON is not set +CONFIG_RT2X00=m +# CONFIG_RT2500USB is not set +CONFIG_RT73USB=m +# CONFIG_RT2800USB is not set +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_DEBUG is not set +# CONFIG_WL12XX is not set +# CONFIG_ZD1211RW is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +# CONFIG_PCMCIA_PCNET is not set +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +CONFIG_TOUCHSCREEN_FUJITSU=m +# CONFIG_TOUCHSCREEN_GUNZE is not set +CONFIG_TOUCHSCREEN_ELO=m +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +CONFIG_TOUCHSCREEN_MTOUCH=m +CONFIG_TOUCHSCREEN_INEXIO=m +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_TOUCHSCREEN_HTCPEN=m +CONFIG_TOUCHSCREEN_PENMOUNT=m +CONFIG_TOUCHSCREEN_TOUCHRIGHT=m +CONFIG_TOUCHSCREEN_TOUCHWIN=m +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_TOUCHIT213=m +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=7 +CONFIG_SERIAL_8250_RUNTIME_UARTS=7 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_PXA is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_GPIO=y +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_PCA_ISA is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_PXA2XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +CONFIG_SENSORS_LM75=m +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SA1100_WATCHDOG is not set + +# +# ISA-based Watchdog Cards +# +# CONFIG_PCWATCHDOG is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_WDT is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=m +# CONFIG_FB_PXA_OVERLAY is not set +# CONFIG_FB_PXA_SMARTPANEL is not set +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_W100 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_GENERIC=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=m +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_ARM=y +CONFIG_SND_PXA2XX_PCM=m +CONFIG_SND_PXA2XX_LIB=m +CONFIG_SND_PXA2XX_LIB_AC97=y +CONFIG_SND_PXA2XX_AC97=m +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_PCMCIA is not set +CONFIG_SND_SOC=m +CONFIG_SND_PXA2XX_SOC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +# CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +# CONFIG_USB_SERIAL_PL2303 is not set +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=m +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_G_PRINTER=m +# CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=m +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +CONFIG_RTC_DRV_ISL1208=m +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SA1100 is not set +CONFIG_RTC_DRV_PXA=m +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_OC_ETM is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +CONFIG_CRC_T10DIF=m +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h index 8eebf89f5ab1..41f99c573b93 100644 --- a/arch/arm/include/asm/mman.h +++ b/arch/arm/include/asm/mman.h @@ -1 +1,4 @@ #include <asm-generic/mman.h> + +#define arch_mmap_check(addr, len, flags) \ + (((flags) & MAP_FIXED && (addr) < FIRST_USER_ADDRESS) ? -EINVAL : 0) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index e7ccf7e697ce..dd00f747e2ad 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -54,5 +54,6 @@ endif head-y := head$(MMUEXT).o obj-$(CONFIG_DEBUG_LL) += debug.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o extra-y := $(head-y) init_task.o vmlinux.lds diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index f58c1156e779..9314a2d681f1 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -172,7 +172,7 @@ /* 160 */ CALL(sys_sched_get_priority_min) CALL(sys_sched_rr_get_interval) CALL(sys_nanosleep) - CALL(sys_arm_mremap) + CALL(sys_mremap) CALL(sys_setresuid16) /* 165 */ CALL(sys_getresuid16) CALL(sys_ni_syscall) /* vm86 */ diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c new file mode 100644 index 000000000000..85aa2b292692 --- /dev/null +++ b/arch/arm/kernel/early_printk.c @@ -0,0 +1,57 @@ +/* + * linux/arch/arm/kernel/early_printk.c + * + * Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/console.h> +#include <linux/init.h> + +extern void printch(int); + +static void early_write(const char *s, unsigned n) +{ + while (n-- > 0) { + if (*s == '\n') + printch('\r'); + printch(*s); + s++; + } +} + +static void early_console_write(struct console *con, const char *s, unsigned n) +{ + early_write(s, n); +} + +static struct console early_console = { + .name = "earlycon", + .write = early_console_write, + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +asmlinkage void early_printk(const char *fmt, ...) +{ + char buf[512]; + int n; + va_list ap; + + va_start(ap, fmt); + n = vscnprintf(buf, sizeof(buf), fmt, ap); + early_write(buf, n); + va_end(ap); +} + +static int __init setup_early_printk(char *buf) +{ + register_console(&early_console); + return 0; +} + +early_param("earlyprintk", setup_early_printk); diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index f0fe95b7085d..2c1db77d7848 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -416,12 +416,12 @@ sys_mmap2: tst r5, #PGOFF_MASK moveq r5, r5, lsr #PAGE_SHIFT - 12 streq r5, [sp, #4] - beq do_mmap2 + beq sys_mmap_pgoff mov r0, #-EINVAL mov pc, lr #else str r5, [sp, #4] - b do_mmap2 + b sys_mmap_pgoff #endif ENDPROC(sys_mmap2) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index a73a34dccf2a..ea02a7b1c244 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -160,6 +160,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) /* Make sure our local interrupt controller has this enabled */ local_irq_save(flags); + irq_to_desc(clk->irq)->status |= IRQ_NOPROBE; get_irq_chip(clk->irq)->unmask(clk->irq); local_irq_restore(flags); diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 78ecaac65206..ae4027bd01bd 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -28,41 +28,6 @@ #include <linux/ipc.h> #include <linux/uaccess.h> -extern unsigned long do_mremap(unsigned long addr, unsigned long old_len, - unsigned long new_len, unsigned long flags, - unsigned long new_addr); - -/* common code for old and new mmaps */ -inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EINVAL; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - if (flags & MAP_FIXED && addr < FIRST_USER_ADDRESS) - goto out; - - error = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - struct mmap_arg_struct { unsigned long addr; unsigned long len; @@ -84,29 +49,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); out: return error; } -asmlinkage unsigned long -sys_arm_mremap(unsigned long addr, unsigned long old_len, - unsigned long new_len, unsigned long flags, - unsigned long new_addr) -{ - unsigned long ret = -EINVAL; - - if (flags & MREMAP_FIXED && new_addr < FIRST_USER_ADDRESS) - goto out; - - down_write(¤t->mm->mmap_sem); - ret = do_mremap(addr, old_len, new_len, flags, new_addr); - up_write(¤t->mm->mmap_sem); - -out: - return ret; -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index e522b20bcbc2..f70d52be48a2 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -30,6 +30,8 @@ #define __virt_to_bus(x) ((x) - PAGE_OFFSET) #define __bus_to_virt(x) ((x) + PAGE_OFFSET) +#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET) +#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET) #endif diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index b97f529e58e8..41febc796b1c 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -201,6 +201,11 @@ void __init footbridge_map_io(void) #ifdef CONFIG_FOOTBRIDGE_ADDIN +static inline unsigned long fb_bus_sdram_offset(void) +{ + return *CSR_PCISDRAMBASE & 0xfffffff0; +} + /* * These two functions convert virtual addresses to PCI addresses and PCI * addresses to virtual addresses. Note that it is only legal to use these @@ -210,14 +215,13 @@ unsigned long __virt_to_bus(unsigned long res) { WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); - return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0); + return res + (fb_bus_sdram_offset() - PAGE_OFFSET); } EXPORT_SYMBOL(__virt_to_bus); unsigned long __bus_to_virt(unsigned long res) { - res -= (*CSR_PCISDRAMBASE & 0xfffffff0); - res += PAGE_OFFSET; + res = res - (fb_bus_sdram_offset() - PAGE_OFFSET); WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); @@ -225,4 +229,16 @@ unsigned long __bus_to_virt(unsigned long res) } EXPORT_SYMBOL(__bus_to_virt); +unsigned long __pfn_to_bus(unsigned long pfn) +{ + return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET)); +} +EXPORT_SYMBOL(__pfn_to_bus); + +unsigned long __bus_to_pfn(unsigned long bus) +{ + return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET)); +} +EXPORT_SYMBOL(__bus_to_pfn); + #endif diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index cb16e59d87b6..8d64f4574087 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -29,6 +29,8 @@ #ifndef __ASSEMBLY__ extern unsigned long __virt_to_bus(unsigned long); extern unsigned long __bus_to_virt(unsigned long); +extern unsigned long __pfn_to_bus(unsigned long); +extern unsigned long __bus_to_pfn(unsigned long); #endif #define __virt_to_bus __virt_to_bus #define __bus_to_virt __bus_to_virt @@ -36,14 +38,15 @@ extern unsigned long __bus_to_virt(unsigned long); #elif defined(CONFIG_FOOTBRIDGE_HOST) /* - * The footbridge is programmed to expose the system RAM at the corresponding - * address. So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000. - * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc. - * The only requirement is that the RAM isn't placed at bus address 0 which + * The footbridge is programmed to expose the system RAM at 0xe0000000. + * The requirement is that the RAM isn't placed at bus address 0, which * would clash with VGA cards. */ -#define __virt_to_bus(x) ((x) - 0xe0000000) -#define __bus_to_virt(x) ((x) + 0xe0000000) +#define BUS_OFFSET 0xe0000000 +#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) +#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) +#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET)) +#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET)) #else diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h index 4891828454f5..991f24d2c115 100644 --- a/arch/arm/mach-integrator/include/mach/memory.h +++ b/arch/arm/mach-integrator/include/mach/memory.h @@ -28,6 +28,7 @@ #define BUS_OFFSET UL(0x80000000) #define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET) #define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET) -#define __pfn_to_bus(x) (((x) << PAGE_SHIFT) + BUS_OFFSET) +#define __pfn_to_bus(x) (__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET)) +#define __bus_to_pfn(x) __phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET)) #endif diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h index aee7eb8a71b2..98e3471be15b 100644 --- a/arch/arm/mach-ixp2000/include/mach/memory.h +++ b/arch/arm/mach-ixp2000/include/mach/memory.h @@ -17,11 +17,15 @@ #include <mach/ixp2000-regs.h> -#define __virt_to_bus(v) \ - (((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0))) +#define IXP2000_PCI_SDRAM_OFFSET (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0) -#define __bus_to_virt(b) \ - __phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0))) +#define __phys_to_bus(x) ((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET)) +#define __bus_to_phys(x) ((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET)) + +#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) +#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) +#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) +#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) #endif diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h index fdd138706c70..94a3a86cfeb8 100644 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ b/arch/arm/mach-ixp23xx/include/mach/memory.h @@ -19,16 +19,15 @@ */ #define PHYS_OFFSET (0x00000000) -#define __virt_to_bus(v) \ - ({ unsigned int ret; \ - ret = ((__virt_to_phys(v) - 0x00000000) + \ - (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); \ - ret; }) - -#define __bus_to_virt(b) \ - ({ unsigned int data; \ - data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR); \ - __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); }) +#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)) + +#define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) +#define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) + +#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v)) +#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b)) +#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p)) +#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b)) #define arch_is_coherent() 1 diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 264f4d59f898..9e5070da17ae 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -179,21 +179,21 @@ config IXP4XX_INDIRECT_PCI help IXP4xx provides two methods of accessing PCI memory space: - 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB). + 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). To access PCI via this space, we simply ioremap() the BAR into the kernel and we can use the standard read[bwl]/write[bwl] macros. This is the preferred method due to speed but it - limits the system to just 64MB of PCI memory. This can be + limits the system to just 64MB of PCI memory. This can be problematic if using video cards and other memory-heavy devices. - - 2) If > 64MB of memory space is required, the IXP4xx can be - configured to use indirect registers to access PCI This allows - for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. - The disadvantage of this is that every PCI access requires - three local register accesses plus a spinlock, but in some - cases the performance hit is acceptable. In addition, you cannot - mmap() PCI devices in this case due to the indirect nature - of the PCI window. + + 2) If > 64MB of memory space is required, the IXP4xx can be + configured to use indirect registers to access the whole PCI + memory space. This currently allows for up to 1 GB (0x10000000 + to 0x4FFFFFFF) of memory on the bus. The disadvantage of this + is that every PCI access requires three local register accesses + plus a spinlock, but in some cases the performance hit is + acceptable. In addition, you cannot mmap() PCI devices in this + case due to the indirect nature of the PCI window. By default, the direct method is used. Choose this option if you need to use the indirect method instead. If you don't know diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 08d65dcdb5fe..845e1b500548 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -22,40 +22,45 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/delay.h> - #include <asm/mach/pci.h> #include <asm/irq.h> #include <mach/hardware.h> #include <asm/mach-types.h> +#define AVILA_MAX_DEV 4 +#define LOFT_MAX_DEV 6 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + void __init avila_pci_preinit(void) { - set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - + set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[AVILA_PCI_IRQ_LINES] = { - IRQ_AVILA_PCI_INTA, - IRQ_AVILA_PCI_INTB, - IRQ_AVILA_PCI_INTC, - IRQ_AVILA_PCI_INTD + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) }; - int irq = -1; - if (slot >= 1 && - slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) && - pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % 4]; - } + slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) && + pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; - return irq; + return -1; } struct hw_pci avila_pci __initdata = { @@ -75,4 +80,3 @@ int __init avila_pci_init(void) } subsys_initcall(avila_pci_init); - diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 797995ce18b9..6e558a76457d 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -19,7 +19,6 @@ #include <linux/serial_8250.h> #include <linux/slab.h> #include <linux/i2c-gpio.h> - #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> @@ -29,6 +28,9 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#define AVILA_SDA_PIN 7 +#define AVILA_SCL_PIN 6 + static struct flash_platform_data avila_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 70afcfe5b881..c4a01594c761 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -481,11 +481,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys) res[1].name = "PCI Memory Space"; res[1].start = PCIBIOS_MIN_MEM; -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - res[1].end = 0x4bffffff; -#else - res[1].end = 0x4fffffff; -#endif + res[1].end = PCIBIOS_MAX_MEM; res[1].flags = IORESOURCE_MEM; request_resource(&ioport_resource, &res[0]); diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index cfd52fb341cb..3bbf40f6d964 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -117,7 +117,7 @@ int gpio_to_irq(int gpio) } EXPORT_SYMBOL(gpio_to_irq); -int irq_to_gpio(int irq) +int irq_to_gpio(unsigned int irq) { int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL; diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index efddf01ed17b..b978ea8bd6f0 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -18,27 +18,31 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/irq.h> - #include <asm/mach/pci.h> +#define SLOT0_DEVID 14 +#define SLOT1_DEVID 15 + +/* PCI controller GPIO to IRQ pin mappings */ +#define SLOT0_INTA 6 +#define SLOT1_INTA 11 + void __init coyote_pci_preinit(void) { - set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW); - + set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } static int __init coyote_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - if (slot == COYOTE_PCI_SLOT0_DEVID) - return IRQ_COYOTE_PCI_SLOT0; - else if (slot == COYOTE_PCI_SLOT1_DEVID) - return IRQ_COYOTE_PCI_SLOT1; + if (slot == SLOT0_DEVID) + return IXP4XX_GPIO_IRQ(SLOT0_INTA); + else if (slot == SLOT1_DEVID) + return IXP4XX_GPIO_IRQ(SLOT1_INTA); else return -1; } diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index aab1954e2747..25bf5ad770ea 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -25,6 +25,15 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) +#define COYOTE_IDE_BASE_VIRT 0xFFFE1000 +#define COYOTE_IDE_REGION_SIZE 0x1000 + +#define COYOTE_IDE_DATA_PORT 0xFFFE10E0 +#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC +#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2 +#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 + static struct flash_platform_data coyote_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index 926d15f885fb..fa70fed462ba 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -19,39 +19,45 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define MAX_DEV 4 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 +#define INTE 7 +#define INTF 6 + void __init dsmg600_pci_preinit(void) { - set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW); - + set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] = - { - { IRQ_DSMG600_PCI_INTE, -1, -1 }, - { IRQ_DSMG600_PCI_INTA, -1, -1 }, - { IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD }, - { IRQ_DSMG600_PCI_INTF, -1, -1 }, + static int pci_irq_table[MAX_DEV][IRQ_LINES] = { + { IXP4XX_GPIO_IRQ(INTE), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTA), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTB), IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) }, + { IXP4XX_GPIO_IRQ(INTF), -1, -1 }, }; - int irq = -1; - - if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV && - pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES) - irq = pci_irq_table[slot-1][pin-1]; + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[slot - 1][pin - 1]; - return irq; + return -1; } struct hw_pci __initdata dsmg600_pci = { diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index a51bfa6978b6..7c1fa54a6145 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -33,6 +33,23 @@ #include <asm/mach/time.h> #include <asm/gpio.h> +#define DSMG600_SDA_PIN 5 +#define DSMG600_SCL_PIN 4 + +/* DSM-G600 Timer Setting */ +#define DSMG600_FREQ 66000000 + +/* Buttons */ +#define DSMG600_PB_GPIO 15 /* power button */ +#define DSMG600_RB_GPIO 3 /* reset button */ + +/* Power control */ +#define DSMG600_PO_GPIO 2 /* power off */ + +/* LEDs */ +#define DSMG600_LED_PWR_GPIO 0 +#define DSMG600_LED_WLAN_GPIO 14 + static struct flash_platform_data dsmg600_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index ca12a9ca0830..5a810c930624 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -19,33 +19,38 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 6 +#define INTB 7 +#define INTC 5 + void __init fsg_pci_preinit(void) { - set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - + set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[FSG_PCI_IRQ_LINES] = { - IRQ_FSG_PCI_INTC, - IRQ_FSG_PCI_INTB, - IRQ_FSG_PCI_INTA, + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTA), }; int irq = -1; - slot = slot - 11; + slot -= 11; - if (slot >= 1 && slot <= FSG_PCI_MAX_DEV && - pin >= 1 && pin <= FSG_PCI_IRQ_LINES) - irq = pci_irq_table[(slot - 1)]; + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + irq = pci_irq_table[slot - 1]; printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, irq); diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 5add22fc9899..e7f4befba422 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -24,12 +24,18 @@ #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/io.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/gpio.h> +#define FSG_SDA_PIN 12 +#define FSG_SCL_PIN 13 + +#define FSG_SB_GPIO 4 /* sync button */ +#define FSG_RB_GPIO 9 /* reset button */ +#define FSG_UB_GPIO 10 /* usb button */ + static struct flash_platform_data fsg_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index a733b8ff3cec..1c28048209c1 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -17,29 +17,28 @@ #include <asm/mach/flash.h> #include <asm/mach/pci.h> -#define xgpio_irq(n) (IRQ_IXP4XX_GPIO ## n) -#define gpio_irq(n) xgpio_irq(n) - #define SLOT_ETHA 0x0B /* IDSEL = AD21 */ #define SLOT_ETHB 0x0C /* IDSEL = AD20 */ #define SLOT_MPCI 0x0D /* IDSEL = AD19 */ #define SLOT_NEC 0x0E /* IDSEL = AD18 */ -#define IRQ_ETHA IRQ_IXP4XX_GPIO4 -#define IRQ_ETHB IRQ_IXP4XX_GPIO5 -#define IRQ_NEC IRQ_IXP4XX_GPIO3 -#define IRQ_MPCI IRQ_IXP4XX_GPIO12 - /* GPIO lines */ #define GPIO_SCL 0 #define GPIO_SDA 1 #define GPIO_STR 2 +#define GPIO_IRQ_NEC 3 +#define GPIO_IRQ_ETHA 4 +#define GPIO_IRQ_ETHB 5 #define GPIO_HSS0_DCD_N 6 #define GPIO_HSS1_DCD_N 7 +#define GPIO_UART0_DCD 8 +#define GPIO_UART1_DCD 9 #define GPIO_HSS0_CTS_N 10 #define GPIO_HSS1_CTS_N 11 +#define GPIO_IRQ_MPCI 12 #define GPIO_HSS1_RTS_N 13 #define GPIO_HSS0_RTS_N 14 +/* GPIO15 is not connected */ /* Control outputs from 74HC4094 */ #define CONTROL_HSS0_CLK_INT 0 @@ -152,7 +151,7 @@ static int hss_set_clock(int port, unsigned int clock_type) static irqreturn_t hss_dcd_irq(int irq, void *pdev) { - int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N)); + int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N)); gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); set_carrier_cb_tab[port](pdev, !i); return IRQ_HANDLED; @@ -165,9 +164,9 @@ static int hss_open(int port, void *pdev, int i, irq; if (!port) - irq = gpio_irq(GPIO_HSS0_DCD_N); + irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N); else - irq = gpio_irq(GPIO_HSS1_DCD_N); + irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N); gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i); set_carrier_cb(pdev, !i); @@ -188,8 +187,8 @@ static int hss_open(int port, void *pdev, static void hss_close(int port, void *pdev) { - free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N), - pdev); + free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) : + IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev); set_carrier_cb_tab[!!port] = NULL; /* catch bugs */ set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); @@ -421,8 +420,8 @@ static void __init gmlr_init(void) gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT); gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN); gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN); - set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); - set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); + set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); + set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); set_control(CONTROL_HSS0_DTR_N, 1); set_control(CONTROL_HSS1_DTR_N, 1); @@ -442,10 +441,10 @@ static void __init gmlr_init(void) #ifdef CONFIG_PCI static void __init gmlr_pci_preinit(void) { - set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } @@ -466,10 +465,10 @@ static void __init gmlr_pci_postinit(void) static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { switch(slot) { - case SLOT_ETHA: return IRQ_ETHA; - case SLOT_ETHB: return IRQ_ETHB; - case SLOT_NEC: return IRQ_NEC; - default: return IRQ_MPCI; + case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA); + case SLOT_ETHB: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB); + case SLOT_NEC: return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC); + default: return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI); } } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 7b8a2c323840..25d2c333c204 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -26,14 +26,16 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/irq.h> - #include <asm/mach-types.h> #include <mach/hardware.h> -#include <mach/gtwx5715.h> #include <asm/mach/pci.h> +#define SLOT0_DEVID 0 +#define SLOT1_DEVID 1 +#define INTA 10 /* slot 1 has INTA and INTB crossed */ +#define INTB 11 + /* - * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h * Slot 0 isn't actually populated with a card connector but * we initialize it anyway in case a future version has the * slot populated or someone with good soldering skills has @@ -41,32 +43,26 @@ */ void __init gtwx5715_pci_preinit(void) { - set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); - + set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - int rc; - static int gtwx5715_irqmap - [GTWX5715_PCI_SLOT_COUNT] - [GTWX5715_PCI_INT_PIN_COUNT] = { - {GTWX5715_PCI_SLOT0_INTA_IRQ, GTWX5715_PCI_SLOT0_INTB_IRQ}, - {GTWX5715_PCI_SLOT1_INTA_IRQ, GTWX5715_PCI_SLOT1_INTB_IRQ}, -}; + int rc = -1; - if (slot >= GTWX5715_PCI_SLOT_COUNT || - pin >= GTWX5715_PCI_INT_PIN_COUNT) rc = -1; - else - rc = gtwx5715_irqmap[slot][pin-1]; + if ((slot == SLOT0_DEVID && pin == 1) || + (slot == SLOT1_DEVID && pin == 2)) + rc = IXP4XX_GPIO_IRQ(INTA); + else if ((slot == SLOT0_DEVID && pin == 2) || + (slot == SLOT1_DEVID && pin == 1)) + rc = IXP4XX_GPIO_IRQ(INTB); - printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc); - return(rc); + printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n", + __func__, slot, pin, rc); + return rc; } struct hw_pci gtwx5715_pci __initdata = { @@ -81,9 +77,7 @@ struct hw_pci gtwx5715_pci __initdata = { int __init gtwx5715_pci_init(void) { if (machine_is_gtwx5715()) - { pci_common_init(>wx5715_pci); - } return 0; } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 25c21d6665ec..0bc7185cb6f7 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -28,7 +28,6 @@ #include <linux/tty.h> #include <linux/serial_8250.h> #include <linux/slab.h> - #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> @@ -37,7 +36,34 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> -#include <mach/gtwx5715.h> + +/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch + and operate as an SPI type interface. The details of the interface + are available on Kendin/Micrel's web site. */ + +#define GTWX5715_KSSPI_SELECT 5 +#define GTWX5715_KSSPI_TXD 6 +#define GTWX5715_KSSPI_CLOCK 7 +#define GTWX5715_KSSPI_RXD 12 + +/* The "reset" button is wired to GPIO 3. + The GPIO is brought "low" when the button is pushed. */ + +#define GTWX5715_BUTTON_GPIO 3 + +/* Board Label Front Label + LED1 Power + LED2 Wireless-G + LED3 not populated but could be + LED4 Internet + LED5 - LED8 Controlled by KS8995M Switch + LED9 DMZ */ + +#define GTWX5715_LED1_GPIO 2 +#define GTWX5715_LED2_GPIO 9 +#define GTWX5715_LED3_GPIO 8 +#define GTWX5715_LED4_GPIO 1 +#define GTWX5715_LED9_GPIO 4 /* * Xscale UART registers are 32 bits wide with only the least diff --git a/arch/arm/mach-ixp4xx/include/mach/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h deleted file mode 100644 index 1640cb61972b..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/avila.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/avila.h - * - * Gateworks Avila platform specific definitions - * - * Author: Michael-Luke Jones <mlj28@cam.ac.uk> - * - * Based on ixdp425.h - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -#define AVILA_SDA_PIN 7 -#define AVILA_SCL_PIN 6 - -/* - * AVILA PCI IRQs - */ -#define AVILA_PCI_MAX_DEV 4 -#define LOFT_PCI_MAX_DEV 6 -#define AVILA_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define AVILA_PCI_INTA_PIN 11 -#define AVILA_PCI_INTB_PIN 10 -#define AVILA_PCI_INTC_PIN 9 -#define AVILA_PCI_INTD_PIN 8 - - diff --git a/arch/arm/mach-ixp4xx/include/mach/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h deleted file mode 100644 index 717ac6d16f55..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/coyote.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/coyote.h - * - * ADI Engineering platform specific definitions - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -/* PCI controller GPIO to IRQ pin mappings */ -#define COYOTE_PCI_SLOT0_PIN 6 -#define COYOTE_PCI_SLOT1_PIN 11 - -#define COYOTE_PCI_SLOT0_DEVID 14 -#define COYOTE_PCI_SLOT1_DEVID 15 - -#define COYOTE_IDE_BASE_PHYS IXP4XX_EXP_BUS_BASE(3) -#define COYOTE_IDE_BASE_VIRT 0xFFFE1000 -#define COYOTE_IDE_REGION_SIZE 0x1000 - -#define COYOTE_IDE_DATA_PORT 0xFFFE10E0 -#define COYOTE_IDE_CTRL_PORT 0xFFFE10FC -#define COYOTE_IDE_ERROR_PORT 0xFFFE10E2 - diff --git a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h deleted file mode 100644 index dc087a34a268..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * DSM-G600 platform specific definitions - * - * Copyright (C) 2006 Tower Technologies - * Author: Alessandro Zummo <a.zummo@towertech.it> - * - * based on ixdp425.h: - * Copyright 2004 (C) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -#define DSMG600_SDA_PIN 5 -#define DSMG600_SCL_PIN 4 - -/* - * DSMG600 PCI IRQs - */ -#define DSMG600_PCI_MAX_DEV 4 -#define DSMG600_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define DSMG600_PCI_INTA_PIN 11 -#define DSMG600_PCI_INTB_PIN 10 -#define DSMG600_PCI_INTC_PIN 9 -#define DSMG600_PCI_INTD_PIN 8 -#define DSMG600_PCI_INTE_PIN 7 -#define DSMG600_PCI_INTF_PIN 6 - -/* DSM-G600 Timer Setting */ -#define DSMG600_FREQ 66000000 - -/* Buttons */ - -#define DSMG600_PB_GPIO 15 /* power button */ -#define DSMG600_RB_GPIO 3 /* reset button */ - -/* Power control */ - -#define DSMG600_PO_GPIO 2 /* power off */ - -/* LEDs */ - -#define DSMG600_LED_PWR_GPIO 0 -#define DSMG600_LED_WLAN_GPIO 14 diff --git a/arch/arm/mach-ixp4xx/include/mach/fsg.h b/arch/arm/mach-ixp4xx/include/mach/fsg.h deleted file mode 100644 index 1f02b7e22a13..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/fsg.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/fsg.h - * - * Freecom FSG-3 platform specific definitions - * - * Author: Rod Whitby <rod@whitby.id.au> - * Author: Tomasz Chmielewski <mangoo@wpkg.org> - * Maintainers: http://www.nslu2-linux.org - * - * Based on coyote.h by - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -#define FSG_SDA_PIN 12 -#define FSG_SCL_PIN 13 - -/* - * FSG PCI IRQs - */ -#define FSG_PCI_MAX_DEV 3 -#define FSG_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define FSG_PCI_INTA_PIN 6 -#define FSG_PCI_INTB_PIN 7 -#define FSG_PCI_INTC_PIN 5 - -/* Buttons */ - -#define FSG_SB_GPIO 4 /* sync button */ -#define FSG_RB_GPIO 9 /* reset button */ -#define FSG_UB_GPIO 10 /* usb button */ - -/* LEDs */ - -#define FSG_LED_WLAN_BIT 0 -#define FSG_LED_WAN_BIT 1 -#define FSG_LED_SATA_BIT 2 -#define FSG_LED_USB_BIT 4 -#define FSG_LED_RING_BIT 5 -#define FSG_LED_SYNC_BIT 7 diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h index cd5aec26c072..a5f87ded2f28 100644 --- a/arch/arm/mach-ixp4xx/include/mach/gpio.h +++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h @@ -70,7 +70,7 @@ static inline void gpio_set_value(unsigned gpio, int value) #include <asm-generic/gpio.h> /* cansleep wrappers */ extern int gpio_to_irq(int gpio); -extern int irq_to_gpio(int gpio); +extern int irq_to_gpio(unsigned int irq); #endif diff --git a/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h deleted file mode 100644 index 5d5e201cac7e..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h - * - * Gemtek GTWX5715 Gateway (Linksys WRV54G) - * - * Copyright 2004 (c) George T. Joseph - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif -#include "irqs.h" - -#define GTWX5715_GPIO0 0 -#define GTWX5715_GPIO1 1 -#define GTWX5715_GPIO2 2 -#define GTWX5715_GPIO3 3 -#define GTWX5715_GPIO4 4 -#define GTWX5715_GPIO5 5 -#define GTWX5715_GPIO6 6 -#define GTWX5715_GPIO7 7 -#define GTWX5715_GPIO8 8 -#define GTWX5715_GPIO9 9 -#define GTWX5715_GPIO10 10 -#define GTWX5715_GPIO11 11 -#define GTWX5715_GPIO12 12 -#define GTWX5715_GPIO13 13 -#define GTWX5715_GPIO14 14 - -#define GTWX5715_GPIO0_IRQ IRQ_IXP4XX_GPIO0 -#define GTWX5715_GPIO1_IRQ IRQ_IXP4XX_GPIO1 -#define GTWX5715_GPIO2_IRQ IRQ_IXP4XX_GPIO2 -#define GTWX5715_GPIO3_IRQ IRQ_IXP4XX_GPIO3 -#define GTWX5715_GPIO4_IRQ IRQ_IXP4XX_GPIO4 -#define GTWX5715_GPIO5_IRQ IRQ_IXP4XX_GPIO5 -#define GTWX5715_GPIO6_IRQ IRQ_IXP4XX_GPIO6 -#define GTWX5715_GPIO7_IRQ IRQ_IXP4XX_GPIO7 -#define GTWX5715_GPIO8_IRQ IRQ_IXP4XX_GPIO8 -#define GTWX5715_GPIO9_IRQ IRQ_IXP4XX_GPIO9 -#define GTWX5715_GPIO10_IRQ IRQ_IXP4XX_GPIO10 -#define GTWX5715_GPIO11_IRQ IRQ_IXP4XX_GPIO11 -#define GTWX5715_GPIO12_IRQ IRQ_IXP4XX_GPIO12 -#define GTWX5715_GPIO13_IRQ IRQ_IXP4XX_SW_INT1 -#define GTWX5715_GPIO14_IRQ IRQ_IXP4XX_SW_INT2 - -/* PCI controller GPIO to IRQ pin mappings - - INTA INTB -SLOT 0 10 11 -SLOT 1 11 10 - -*/ - -#define GTWX5715_PCI_SLOT0_DEVID 0 -#define GTWX5715_PCI_SLOT0_INTA_GPIO GTWX5715_GPIO10 -#define GTWX5715_PCI_SLOT0_INTB_GPIO GTWX5715_GPIO11 -#define GTWX5715_PCI_SLOT0_INTA_IRQ GTWX5715_GPIO10_IRQ -#define GTWX5715_PCI_SLOT0_INTB_IRQ GTWX5715_GPIO11_IRQ - -#define GTWX5715_PCI_SLOT1_DEVID 1 -#define GTWX5715_PCI_SLOT1_INTA_GPIO GTWX5715_GPIO11 -#define GTWX5715_PCI_SLOT1_INTB_GPIO GTWX5715_GPIO10 -#define GTWX5715_PCI_SLOT1_INTA_IRQ GTWX5715_GPIO11_IRQ -#define GTWX5715_PCI_SLOT1_INTB_IRQ GTWX5715_GPIO10_IRQ - -#define GTWX5715_PCI_SLOT_COUNT 2 -#define GTWX5715_PCI_INT_PIN_COUNT 2 - -/* - * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch - * and operate as an SPI type interface. The details of the interface - * are available on Kendin/Micrel's web site. - */ - -#define GTWX5715_KSSPI_SELECT GTWX5715_GPIO5 -#define GTWX5715_KSSPI_TXD GTWX5715_GPIO6 -#define GTWX5715_KSSPI_CLOCK GTWX5715_GPIO7 -#define GTWX5715_KSSPI_RXD GTWX5715_GPIO12 - -/* - * The "reset" button is wired to GPIO 3. - * The GPIO is brought "low" when the button is pushed. - */ - -#define GTWX5715_BUTTON_GPIO GTWX5715_GPIO3 -#define GTWX5715_BUTTON_IRQ GTWX5715_GPIO3_IRQ - -/* - * Board Label Front Label - * LED1 Power - * LED2 Wireless-G - * LED3 not populated but could be - * LED4 Internet - * LED5 - LED8 Controlled by KS8995M Switch - * LED9 DMZ - */ - -#define GTWX5715_LED1_GPIO GTWX5715_GPIO2 -#define GTWX5715_LED2_GPIO GTWX5715_GPIO9 -#define GTWX5715_LED3_GPIO GTWX5715_GPIO8 -#define GTWX5715_LED4_GPIO GTWX5715_GPIO1 -#define GTWX5715_LED9_GPIO GTWX5715_GPIO4 diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h index f58a43a23966..f9d1c43e4a54 100644 --- a/arch/arm/mach-ixp4xx/include/mach/hardware.h +++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h @@ -18,7 +18,13 @@ #define __ASM_ARCH_HARDWARE_H__ #define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM (cpu_is_ixp43x() ? 0x40000000 : 0x48000000) +#ifdef CONFIG_IXP4XX_INDIRECT_PCI +#define PCIBIOS_MIN_MEM 0x10000000 /* 1 GB of indirect PCI MMIO space */ +#define PCIBIOS_MAX_MEM 0x4FFFFFFF +#else +#define PCIBIOS_MIN_MEM 0x48000000 /* 64 MB of PCI MMIO space */ +#define PCIBIOS_MAX_MEM 0x4BFFFFFF +#endif /* * We override the standard dma-mask routines for bouncing. @@ -37,14 +43,4 @@ /* Platform helper functions and definitions */ #include "platform.h" -/* Platform specific details */ -#include "ixdp425.h" -#include "avila.h" -#include "coyote.h" -#include "prpmc1100.h" -#include "nslu2.h" -#include "nas100d.h" -#include "dsmg600.h" -#include "fsg.h" - #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 8a947d42a6f1..6ea7e2fb2701 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -26,22 +26,20 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); /* * IXP4xx provides two methods of accessing PCI memory space: * - * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB). + * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). * To access PCI via this space, we simply ioremap() the BAR * into the kernel and we can use the standard read[bwl]/write[bwl] * macros. This is the preffered method due to speed but it - * limits the system to just 64MB of PCI memory. This can be - * problamatic if using video cards and other memory-heavy - * targets. - * - * 2) If > 64MB of memory space is required, the IXP4xx can be configured - * to use indirect registers to access PCI (as we do below for I/O - * transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff) - * of memory on the bus. The disadvantage of this is that every - * PCI access requires three local register accesses plus a spinlock, - * but in some cases the performance hit is acceptable. In addition, - * you cannot mmap() PCI devices in this case. + * limits the system to just 64MB of PCI memory. This can be + * problematic if using video cards and other memory-heavy targets. * + * 2) If > 64MB of memory space is required, the IXP4xx can use indirect + * registers to access the whole 4 GB of PCI memory space (as we do below + * for I/O transactions). This allows currently for up to 1 GB (0x10000000 + * to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that + * every PCI access requires three local register accesses plus a spinlock, + * but in some cases the performance hit is acceptable. In addition, you + * cannot mmap() PCI devices in this case. */ #ifndef CONFIG_IXP4XX_INDIRECT_PCI @@ -55,48 +53,52 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); * access registers. If something outside of PCI is ioremap'd, we * fallback to the default. */ -static inline void __iomem * -__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype) + +static inline int is_pci_memory(u32 addr) +{ + return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF); +} + +static inline void __iomem * __indirect_ioremap(unsigned long addr, size_t size, + unsigned int mtype) { - if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff)) + if (!is_pci_memory(addr)) return __arm_ioremap(addr, size, mtype); return (void __iomem *)addr; } -static inline void -__ixp4xx_iounmap(void __iomem *addr) +static inline void __indirect_iounmap(void __iomem *addr) { - if ((__force u32)addr >= VMALLOC_START) + if (!is_pci_memory((__force u32)addr)) __iounmap(addr); } -#define __arch_ioremap(a, s, f) __ixp4xx_ioremap(a, s, f) -#define __arch_iounmap(a) __ixp4xx_iounmap(a) +#define __arch_ioremap(a, s, f) __indirect_ioremap(a, s, f) +#define __arch_iounmap(a) __indirect_iounmap(a) -#define writeb(v, p) __ixp4xx_writeb(v, p) -#define writew(v, p) __ixp4xx_writew(v, p) -#define writel(v, p) __ixp4xx_writel(v, p) +#define writeb(v, p) __indirect_writeb(v, p) +#define writew(v, p) __indirect_writew(v, p) +#define writel(v, p) __indirect_writel(v, p) -#define writesb(p, v, l) __ixp4xx_writesb(p, v, l) -#define writesw(p, v, l) __ixp4xx_writesw(p, v, l) -#define writesl(p, v, l) __ixp4xx_writesl(p, v, l) - -#define readb(p) __ixp4xx_readb(p) -#define readw(p) __ixp4xx_readw(p) -#define readl(p) __ixp4xx_readl(p) - -#define readsb(p, v, l) __ixp4xx_readsb(p, v, l) -#define readsw(p, v, l) __ixp4xx_readsw(p, v, l) -#define readsl(p, v, l) __ixp4xx_readsl(p, v, l) +#define writesb(p, v, l) __indirect_writesb(p, v, l) +#define writesw(p, v, l) __indirect_writesw(p, v, l) +#define writesl(p, v, l) __indirect_writesl(p, v, l) -static inline void -__ixp4xx_writeb(u8 value, volatile void __iomem *p) +#define readb(p) __indirect_readb(p) +#define readw(p) __indirect_readw(p) +#define readl(p) __indirect_readl(p) + +#define readsb(p, v, l) __indirect_readsb(p, v, l) +#define readsw(p, v, l) __indirect_readsw(p, v, l) +#define readsl(p, v, l) __indirect_readsl(p, v, l) + +static inline void __indirect_writeb(u8 value, volatile void __iomem *p) { u32 addr = (u32)p; u32 n, byte_enables, data; - if (addr >= VMALLOC_START) { + if (!is_pci_memory(addr)) { __raw_writeb(value, addr); return; } @@ -107,20 +109,19 @@ __ixp4xx_writeb(u8 value, volatile void __iomem *p) ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); } -static inline void -__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count) +static inline void __indirect_writesb(volatile void __iomem *bus_addr, + const u8 *vaddr, int count) { while (count--) writeb(*vaddr++, bus_addr); } -static inline void -__ixp4xx_writew(u16 value, volatile void __iomem *p) +static inline void __indirect_writew(u16 value, volatile void __iomem *p) { u32 addr = (u32)p; u32 n, byte_enables, data; - if (addr >= VMALLOC_START) { + if (!is_pci_memory(addr)) { __raw_writew(value, addr); return; } @@ -131,18 +132,18 @@ __ixp4xx_writew(u16 value, volatile void __iomem *p) ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); } -static inline void -__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count) +static inline void __indirect_writesw(volatile void __iomem *bus_addr, + const u16 *vaddr, int count) { while (count--) writew(*vaddr++, bus_addr); } -static inline void -__ixp4xx_writel(u32 value, volatile void __iomem *p) +static inline void __indirect_writel(u32 value, volatile void __iomem *p) { u32 addr = (__force u32)p; - if (addr >= VMALLOC_START) { + + if (!is_pci_memory(addr)) { __raw_writel(value, p); return; } @@ -150,20 +151,19 @@ __ixp4xx_writel(u32 value, volatile void __iomem *p) ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value); } -static inline void -__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count) +static inline void __indirect_writesl(volatile void __iomem *bus_addr, + const u32 *vaddr, int count) { while (count--) writel(*vaddr++, bus_addr); } -static inline unsigned char -__ixp4xx_readb(const volatile void __iomem *p) +static inline unsigned char __indirect_readb(const volatile void __iomem *p) { u32 addr = (u32)p; u32 n, byte_enables, data; - if (addr >= VMALLOC_START) + if (!is_pci_memory(addr)) return __raw_readb(addr); n = addr % 4; @@ -174,20 +174,19 @@ __ixp4xx_readb(const volatile void __iomem *p) return data >> (8*n); } -static inline void -__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count) +static inline void __indirect_readsb(const volatile void __iomem *bus_addr, + u8 *vaddr, u32 count) { while (count--) *vaddr++ = readb(bus_addr); } -static inline unsigned short -__ixp4xx_readw(const volatile void __iomem *p) +static inline unsigned short __indirect_readw(const volatile void __iomem *p) { u32 addr = (u32)p; u32 n, byte_enables, data; - if (addr >= VMALLOC_START) + if (!is_pci_memory(addr)) return __raw_readw(addr); n = addr % 4; @@ -198,20 +197,19 @@ __ixp4xx_readw(const volatile void __iomem *p) return data>>(8*n); } -static inline void -__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count) +static inline void __indirect_readsw(const volatile void __iomem *bus_addr, + u16 *vaddr, u32 count) { while (count--) *vaddr++ = readw(bus_addr); } -static inline unsigned long -__ixp4xx_readl(const volatile void __iomem *p) +static inline unsigned long __indirect_readl(const volatile void __iomem *p) { u32 addr = (__force u32)p; u32 data; - if (addr >= VMALLOC_START) + if (!is_pci_memory(addr)) return __raw_readl(p); if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data)) @@ -220,8 +218,8 @@ __ixp4xx_readl(const volatile void __iomem *p) return data; } -static inline void -__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) +static inline void __indirect_readsl(const volatile void __iomem *bus_addr, + u32 *vaddr, u32 count) { while (count--) *vaddr++ = readl(bus_addr); @@ -235,7 +233,7 @@ __ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) #define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l)) #define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l)) -#endif +#endif /* CONFIG_IXP4XX_INDIRECT_PCI */ #ifndef CONFIG_PCI @@ -250,25 +248,8 @@ __ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count) * transaction. This means that we need to override the default * I/O functions. */ -#define outb(p, v) __ixp4xx_outb(p, v) -#define outw(p, v) __ixp4xx_outw(p, v) -#define outl(p, v) __ixp4xx_outl(p, v) - -#define outsb(p, v, l) __ixp4xx_outsb(p, v, l) -#define outsw(p, v, l) __ixp4xx_outsw(p, v, l) -#define outsl(p, v, l) __ixp4xx_outsl(p, v, l) -#define inb(p) __ixp4xx_inb(p) -#define inw(p) __ixp4xx_inw(p) -#define inl(p) __ixp4xx_inl(p) - -#define insb(p, v, l) __ixp4xx_insb(p, v, l) -#define insw(p, v, l) __ixp4xx_insw(p, v, l) -#define insl(p, v, l) __ixp4xx_insl(p, v, l) - - -static inline void -__ixp4xx_outb(u8 value, u32 addr) +static inline void outb(u8 value, u32 addr) { u32 n, byte_enables, data; n = addr % 4; @@ -277,15 +258,13 @@ __ixp4xx_outb(u8 value, u32 addr) ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); } -static inline void -__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count) +static inline void outsb(u32 io_addr, const u8 *vaddr, u32 count) { while (count--) outb(*vaddr++, io_addr); } -static inline void -__ixp4xx_outw(u16 value, u32 addr) +static inline void outw(u16 value, u32 addr) { u32 n, byte_enables, data; n = addr % 4; @@ -294,28 +273,24 @@ __ixp4xx_outw(u16 value, u32 addr) ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); } -static inline void -__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count) +static inline void outsw(u32 io_addr, const u16 *vaddr, u32 count) { while (count--) outw(cpu_to_le16(*vaddr++), io_addr); } -static inline void -__ixp4xx_outl(u32 value, u32 addr) +static inline void outl(u32 value, u32 addr) { ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value); } -static inline void -__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count) +static inline void outsl(u32 io_addr, const u32 *vaddr, u32 count) { while (count--) - outl(*vaddr++, io_addr); + outl(cpu_to_le32(*vaddr++), io_addr); } -static inline u8 -__ixp4xx_inb(u32 addr) +static inline u8 inb(u32 addr) { u32 n, byte_enables, data; n = addr % 4; @@ -326,15 +301,13 @@ __ixp4xx_inb(u32 addr) return data >> (8*n); } -static inline void -__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count) +static inline void insb(u32 io_addr, u8 *vaddr, u32 count) { while (count--) *vaddr++ = inb(io_addr); } -static inline u16 -__ixp4xx_inw(u32 addr) +static inline u16 inw(u32 addr) { u32 n, byte_enables, data; n = addr % 4; @@ -345,15 +318,13 @@ __ixp4xx_inw(u32 addr) return data>>(8*n); } -static inline void -__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count) +static inline void insw(u32 io_addr, u16 *vaddr, u32 count) { while (count--) *vaddr++ = le16_to_cpu(inw(io_addr)); } -static inline u32 -__ixp4xx_inl(u32 addr) +static inline u32 inl(u32 addr) { u32 data; if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data)) @@ -362,11 +333,10 @@ __ixp4xx_inl(u32 addr) return data; } -static inline void -__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count) +static inline void insl(u32 io_addr, u32 *vaddr, u32 count) { while (count--) - *vaddr++ = inl(io_addr); + *vaddr++ = le32_to_cpu(inl(io_addr)); } #define PIO_OFFSET 0x10000UL @@ -374,194 +344,183 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count) #define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) -static inline unsigned int -__ixp4xx_ioread8(const void __iomem *addr) + +#define ioread8(p) ioread8(p) +static inline unsigned int ioread8(const void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inb(port & PIO_MASK); + return (unsigned int)inb(port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI return (unsigned int)__raw_readb(port); #else - return (unsigned int)__ixp4xx_readb(addr); + return (unsigned int)__indirect_readb(addr); #endif } -static inline void -__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) +#define ioread8_rep(p, v, c) ioread8_rep(p, v, c) +static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_insb(port & PIO_MASK, vaddr, count); + insb(port & PIO_MASK, vaddr, count); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_readsb(addr, vaddr, count); #else - __ixp4xx_readsb(addr, vaddr, count); + __indirect_readsb(addr, vaddr, count); #endif } -static inline unsigned int -__ixp4xx_ioread16(const void __iomem *addr) +#define ioread16(p) ioread16(p) +static inline unsigned int ioread16(const void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inw(port & PIO_MASK); + return (unsigned int)inw(port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI return le16_to_cpu(__raw_readw((u32)port)); #else - return (unsigned int)__ixp4xx_readw(addr); + return (unsigned int)__indirect_readw(addr); #endif } -static inline void -__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count) +#define ioread16_rep(p, v, c) ioread16_rep(p, v, c) +static inline void ioread16_rep(const void __iomem *addr, void *vaddr, + u32 count) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_insw(port & PIO_MASK, vaddr, count); + insw(port & PIO_MASK, vaddr, count); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_readsw(addr, vaddr, count); #else - __ixp4xx_readsw(addr, vaddr, count); + __indirect_readsw(addr, vaddr, count); #endif } -static inline unsigned int -__ixp4xx_ioread32(const void __iomem *addr) +#define ioread32(p) ioread32(p) +static inline unsigned int ioread32(const void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - return (unsigned int)__ixp4xx_inl(port & PIO_MASK); + return (unsigned int)inl(port & PIO_MASK); else { #ifndef CONFIG_IXP4XX_INDIRECT_PCI return le32_to_cpu((__force __le32)__raw_readl(addr)); #else - return (unsigned int)__ixp4xx_readl(addr); + return (unsigned int)__indirect_readl(addr); #endif } } -static inline void -__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count) +#define ioread32_rep(p, v, c) ioread32_rep(p, v, c) +static inline void ioread32_rep(const void __iomem *addr, void *vaddr, + u32 count) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_insl(port & PIO_MASK, vaddr, count); + insl(port & PIO_MASK, vaddr, count); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_readsl(addr, vaddr, count); #else - __ixp4xx_readsl(addr, vaddr, count); + __indirect_readsl(addr, vaddr, count); #endif } -static inline void -__ixp4xx_iowrite8(u8 value, void __iomem *addr) +#define iowrite8(v, p) iowrite8(v, p) +static inline void iowrite8(u8 value, void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_outb(value, port & PIO_MASK); + outb(value, port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_writeb(value, port); #else - __ixp4xx_writeb(value, addr); + __indirect_writeb(value, addr); #endif } -static inline void -__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count) +#define iowrite8_rep(p, v, c) iowrite8_rep(p, v, c) +static inline void iowrite8_rep(void __iomem *addr, const void *vaddr, + u32 count) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_outsb(port & PIO_MASK, vaddr, count); + outsb(port & PIO_MASK, vaddr, count); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_writesb(addr, vaddr, count); #else - __ixp4xx_writesb(addr, vaddr, count); + __indirect_writesb(addr, vaddr, count); #endif } -static inline void -__ixp4xx_iowrite16(u16 value, void __iomem *addr) +#define iowrite16(v, p) iowrite16(v, p) +static inline void iowrite16(u16 value, void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_outw(value, port & PIO_MASK); + outw(value, port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_writew(cpu_to_le16(value), addr); #else - __ixp4xx_writew(value, addr); + __indirect_writew(value, addr); #endif } -static inline void -__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count) +#define iowrite16_rep(p, v, c) iowrite16_rep(p, v, c) +static inline void iowrite16_rep(void __iomem *addr, const void *vaddr, + u32 count) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_outsw(port & PIO_MASK, vaddr, count); + outsw(port & PIO_MASK, vaddr, count); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_writesw(addr, vaddr, count); #else - __ixp4xx_writesw(addr, vaddr, count); + __indirect_writesw(addr, vaddr, count); #endif } -static inline void -__ixp4xx_iowrite32(u32 value, void __iomem *addr) +#define iowrite32(v, p) iowrite32(v, p) +static inline void iowrite32(u32 value, void __iomem *addr) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_outl(value, port & PIO_MASK); + outl(value, port & PIO_MASK); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_writel((u32 __force)cpu_to_le32(value), addr); #else - __ixp4xx_writel(value, addr); + __indirect_writel(value, addr); #endif } -static inline void -__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count) +#define iowrite32_rep(p, v, c) iowrite32_rep(p, v, c) +static inline void iowrite32_rep(void __iomem *addr, const void *vaddr, + u32 count) { unsigned long port = (unsigned long __force)addr; if (__is_io_address(port)) - __ixp4xx_outsl(port & PIO_MASK, vaddr, count); + outsl(port & PIO_MASK, vaddr, count); else #ifndef CONFIG_IXP4XX_INDIRECT_PCI __raw_writesl(addr, vaddr, count); #else - __ixp4xx_writesl(addr, vaddr, count); + __indirect_writesl(addr, vaddr, count); #endif } -#define ioread8(p) __ixp4xx_ioread8(p) -#define ioread16(p) __ixp4xx_ioread16(p) -#define ioread32(p) __ixp4xx_ioread32(p) - -#define ioread8_rep(p, v, c) __ixp4xx_ioread8_rep(p, v, c) -#define ioread16_rep(p, v, c) __ixp4xx_ioread16_rep(p, v, c) -#define ioread32_rep(p, v, c) __ixp4xx_ioread32_rep(p, v, c) - -#define iowrite8(v,p) __ixp4xx_iowrite8(v,p) -#define iowrite16(v,p) __ixp4xx_iowrite16(v,p) -#define iowrite32(v,p) __ixp4xx_iowrite32(v,p) - -#define iowrite8_rep(p, v, c) __ixp4xx_iowrite8_rep(p, v, c) -#define iowrite16_rep(p, v, c) __ixp4xx_iowrite16_rep(p, v, c) -#define iowrite32_rep(p, v, c) __ixp4xx_iowrite32_rep(p, v, c) - #define ioport_map(port, nr) ((void __iomem*)(port + PIO_OFFSET)) #define ioport_unmap(addr) -#endif // !CONFIG_PCI - -#endif // __ASM_ARM_ARCH_IO_H +#endif /* CONFIG_PCI */ +#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h index f4d74de1566a..7e6d4cce7c27 100644 --- a/arch/arm/mach-ixp4xx/include/mach/irqs.h +++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h @@ -15,7 +15,6 @@ #ifndef _ARCH_IXP4XX_IRQS_H_ #define _ARCH_IXP4XX_IRQS_H_ - #define IRQ_IXP4XX_NPEA 0 #define IRQ_IXP4XX_NPEB 1 #define IRQ_IXP4XX_NPEC 2 @@ -59,6 +58,9 @@ #define IRQ_IXP4XX_MCU_ECC 61 #define IRQ_IXP4XX_EXP_PE 62 +#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n) +#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n) + /* * Only first 32 sources are valid if running on IXP42x systems */ @@ -70,69 +72,4 @@ #define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) -/* - * IXDP425 board IRQs - */ -#define IRQ_IXDP425_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_IXDP425_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_IXDP425_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_IXDP425_PCI_INTD IRQ_IXP4XX_GPIO8 - -/* - * Gateworks Avila board IRQs - */ -#define IRQ_AVILA_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_AVILA_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_AVILA_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_AVILA_PCI_INTD IRQ_IXP4XX_GPIO8 - - -/* - * PrPMC1100 Board IRQs - */ -#define IRQ_PRPMC1100_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_PRPMC1100_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_PRPMC1100_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_PRPMC1100_PCI_INTD IRQ_IXP4XX_GPIO8 - -/* - * ADI Coyote Board IRQs - */ -#define IRQ_COYOTE_PCI_SLOT0 IRQ_IXP4XX_GPIO6 -#define IRQ_COYOTE_PCI_SLOT1 IRQ_IXP4XX_GPIO11 -#define IRQ_COYOTE_IDE IRQ_IXP4XX_GPIO5 - -/* - * NSLU2 board IRQs - */ -#define IRQ_NSLU2_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_NSLU2_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_NSLU2_PCI_INTC IRQ_IXP4XX_GPIO9 - -/* - * NAS100D board IRQs - */ -#define IRQ_NAS100D_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_NAS100D_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_NAS100D_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8 -#define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7 - -/* - * D-Link DSM-G600 RevA board IRQs - */ -#define IRQ_DSMG600_PCI_INTA IRQ_IXP4XX_GPIO11 -#define IRQ_DSMG600_PCI_INTB IRQ_IXP4XX_GPIO10 -#define IRQ_DSMG600_PCI_INTC IRQ_IXP4XX_GPIO9 -#define IRQ_DSMG600_PCI_INTD IRQ_IXP4XX_GPIO8 -#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7 -#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6 - -/* - * Freecom FSG-3 Board IRQs - */ -#define IRQ_FSG_PCI_INTA IRQ_IXP4XX_GPIO6 -#define IRQ_FSG_PCI_INTB IRQ_IXP4XX_GPIO7 -#define IRQ_FSG_PCI_INTC IRQ_IXP4XX_GPIO5 - #endif diff --git a/arch/arm/mach-ixp4xx/include/mach/ixdp425.h b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h deleted file mode 100644 index 2cafe65ebfee..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/ixdp425.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/ixdp425.h - * - * IXDP425 platform specific definitions - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -#define IXDP425_SDA_PIN 7 -#define IXDP425_SCL_PIN 6 - -/* - * IXDP425 PCI IRQs - */ -#define IXDP425_PCI_MAX_DEV 4 -#define IXDP425_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define IXDP425_PCI_INTA_PIN 11 -#define IXDP425_PCI_INTB_PIN 10 -#define IXDP425_PCI_INTC_PIN 9 -#define IXDP425_PCI_INTD_PIN 8 - -/* NAND Flash pins */ -#define IXDP425_NAND_NCE_PIN 12 - -#define IXDP425_NAND_CMD_BYTE 0x01 -#define IXDP425_NAND_ADDR_BYTE 0x02 diff --git a/arch/arm/mach-ixp4xx/include/mach/nas100d.h b/arch/arm/mach-ixp4xx/include/mach/nas100d.h deleted file mode 100644 index 3771d62a9748..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/nas100d.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/nas100d.h - * - * NAS100D platform specific definitions - * - * Copyright (c) 2005 Tower Technologies - * - * Author: Alessandro Zummo <a.zummo@towertech.it> - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -#define NAS100D_SDA_PIN 5 -#define NAS100D_SCL_PIN 6 - -/* - * NAS100D PCI IRQs - */ -#define NAS100D_PCI_MAX_DEV 3 -#define NAS100D_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NAS100D_PCI_INTA_PIN 11 -#define NAS100D_PCI_INTB_PIN 10 -#define NAS100D_PCI_INTC_PIN 9 -#define NAS100D_PCI_INTD_PIN 8 -#define NAS100D_PCI_INTE_PIN 7 - -/* Buttons */ - -#define NAS100D_PB_GPIO 14 /* power button */ -#define NAS100D_RB_GPIO 4 /* reset button */ - -/* Power control */ - -#define NAS100D_PO_GPIO 12 /* power off */ - -/* LEDs */ - -#define NAS100D_LED_WLAN_GPIO 0 -#define NAS100D_LED_DISK_GPIO 3 -#define NAS100D_LED_PWR_GPIO 15 diff --git a/arch/arm/mach-ixp4xx/include/mach/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h index 37d0511689dc..e320db2457ae 100644 --- a/arch/arm/mach-ixp4xx/include/mach/npe.h +++ b/arch/arm/mach-ixp4xx/include/mach/npe.h @@ -33,7 +33,7 @@ int npe_send_message(struct npe *npe, const void *msg, const char *what); int npe_recv_message(struct npe *npe, void *msg, const char *what); int npe_send_recv_message(struct npe *npe, void *msg, const char *what); int npe_load_firmware(struct npe *npe, const char *name, struct device *dev); -struct npe *npe_request(int id); +struct npe *npe_request(unsigned id); void npe_release(struct npe *npe); #endif /* __IXP4XX_NPE_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/nslu2.h b/arch/arm/mach-ixp4xx/include/mach/nslu2.h deleted file mode 100644 index 85d00adbfb92..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/nslu2.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/nslu2.h - * - * NSLU2 platform specific definitions - * - * Author: Mark Rakes <mrakes AT mac.com> - * Maintainers: http://www.nslu2-linux.org - * - * based on ixdp425.h: - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -#define NSLU2_SDA_PIN 7 -#define NSLU2_SCL_PIN 6 - -/* - * NSLU2 PCI IRQs - */ -#define NSLU2_PCI_MAX_DEV 3 -#define NSLU2_PCI_IRQ_LINES 3 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define NSLU2_PCI_INTA_PIN 11 -#define NSLU2_PCI_INTB_PIN 10 -#define NSLU2_PCI_INTC_PIN 9 -#define NSLU2_PCI_INTD_PIN 8 - -/* NSLU2 Timer */ -#define NSLU2_FREQ 66000000 - -/* Buttons */ - -#define NSLU2_PB_GPIO 5 /* power button */ -#define NSLU2_PO_GPIO 8 /* power off */ -#define NSLU2_RB_GPIO 12 /* reset button */ - -/* Buzzer */ - -#define NSLU2_GPIO_BUZZ 4 - -/* LEDs */ - -#define NSLU2_LED_RED_GPIO 0 -#define NSLU2_LED_GRN_GPIO 1 -#define NSLU2_LED_DISK1_GPIO 3 -#define NSLU2_LED_DISK2_GPIO 2 diff --git a/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h deleted file mode 100644 index 17274a2e3dec..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/prpmc1100.h - * - * Motorolla PrPMC1100 platform specific definitions - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -#define PRPMC1100_FLASH_BASE IXP4XX_EXP_BUS_CS0_BASE_PHYS -#define PRPMC1100_FLASH_SIZE IXP4XX_EXP_BUS_CSX_REGION_SIZE - -#define PRPMC1100_PCI_MIN_DEVID 10 -#define PRPMC1100_PCI_MAX_DEVID 16 -#define PRPMC1100_PCI_IRQ_LINES 4 - - -/* PCI controller GPIO to IRQ pin mappings */ -#define PRPMC1100_PCI_INTA_PIN 11 -#define PRPMC1100_PCI_INTB_PIN 10 -#define PRPMC1100_PCI_INTC_PIN 9 -#define PRPMC1100_PCI_INTD_PIN 8 - - diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h index 89ce3ee84698..2c3f93c3eb79 100644 --- a/arch/arm/mach-ixp4xx/include/mach/timex.h +++ b/arch/arm/mach-ixp4xx/include/mach/timex.h @@ -10,6 +10,6 @@ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the * timer register ignores the bottom 2 bits of the LATCH value. */ -#define FREQ 66666666 +#define FREQ 66666000 #define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ) diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 64c29aacaac9..1ba165a6edac 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -1,5 +1,5 @@ /* - * arch/arm/mach-ixp4xx/ixdp425-pci.c + * arch/arm/mach-ixp4xx/ixdp425-pci.c * * IXDP425 board-level PCI initialization * @@ -19,39 +19,43 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/delay.h> - #include <asm/mach/pci.h> #include <asm/irq.h> #include <mach/hardware.h> #include <asm/mach-types.h> +#define MAX_DEV 4 +#define IRQ_LINES 4 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + + void __init ixdp425_pci_preinit(void) { - set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - + set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } static int __init ixdp425_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[IXDP425_PCI_IRQ_LINES] = { - IRQ_IXDP425_PCI_INTA, - IRQ_IXDP425_PCI_INTB, - IRQ_IXDP425_PCI_INTC, - IRQ_IXDP425_PCI_INTD + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), + IXP4XX_GPIO_IRQ(INTD) }; - int irq = -1; - - if (slot >= 1 && slot <= IXDP425_PCI_MAX_DEV && - pin >= 1 && pin <= IXDP425_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % 4]; - } + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % 4]; - return irq; + return -1; } struct hw_pci ixdp425_pci __initdata = { @@ -72,4 +76,3 @@ int __init ixdp425_pci_init(void) } subsys_initcall(ixdp425_pci_init); - diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index f4a0c1bc1331..bbb768988845 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -1,7 +1,7 @@ /* * arch/arm/mach-ixp4xx/ixdp425-setup.c * - * IXDP425/IXCDP1100 board-setup + * IXDP425/IXCDP1100 board-setup * * Copyright (C) 2003-2005 MontaVista Software, Inc. * @@ -21,7 +21,6 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/delay.h> - #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> @@ -31,6 +30,15 @@ #include <asm/mach/arch.h> #include <asm/mach/flash.h> +#define IXDP425_SDA_PIN 7 +#define IXDP425_SCL_PIN 6 + +/* NAND Flash pins */ +#define IXDP425_NAND_NCE_PIN 12 + +#define IXDP425_NAND_CMD_BYTE 0x01 +#define IXDP425_NAND_ADDR_BYTE 0x02 + static struct flash_platform_data ixdp425_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index 47ac69c7ec78..e8bb25778166 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -665,7 +665,7 @@ err: } -struct npe *npe_request(int id) +struct npe *npe_request(unsigned id) { if (id < NPE_COUNT) if (npe_tab[id].valid) diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index 1088426fdcee..d0cea34cf61e 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -18,37 +18,42 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 +#define INTE 7 + void __init nas100d_pci_preinit(void) { - set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW); - + set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] = - { - { IRQ_NAS100D_PCI_INTA, -1, -1 }, - { IRQ_NAS100D_PCI_INTB, -1, -1 }, - { IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE }, + static int pci_irq_table[MAX_DEV][IRQ_LINES] = { + { IXP4XX_GPIO_IRQ(INTA), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTB), -1, -1 }, + { IXP4XX_GPIO_IRQ(INTC), IXP4XX_GPIO_IRQ(INTD), + IXP4XX_GPIO_IRQ(INTE) }, }; - int irq = -1; - - if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV && - pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES) - irq = pci_irq_table[slot-1][pin-1]; + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[slot - 1][pin - 1]; - return irq; + return -1; } struct hw_pci __initdata nas100d_pci = { diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index 921c947b5b6b..e3ee880aa1e6 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -29,12 +29,26 @@ #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/io.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/gpio.h> +#define NAS100D_SDA_PIN 5 +#define NAS100D_SCL_PIN 6 + +/* Buttons */ +#define NAS100D_PB_GPIO 14 /* power button */ +#define NAS100D_RB_GPIO 4 /* reset button */ + +/* Power control */ +#define NAS100D_PO_GPIO 12 /* power off */ + +/* LEDs */ +#define NAS100D_LED_WLAN_GPIO 0 +#define NAS100D_LED_DISK_GPIO 3 +#define NAS100D_LED_PWR_GPIO 15 + static struct flash_platform_data nas100d_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 4429b8448b61..1eb5a90470bc 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -18,35 +18,38 @@ #include <linux/pci.h> #include <linux/init.h> #include <linux/irq.h> - #include <asm/mach/pci.h> #include <asm/mach-types.h> +#define MAX_DEV 3 +#define IRQ_LINES 3 + +/* PCI controller GPIO to IRQ pin mappings */ +#define INTA 11 +#define INTB 10 +#define INTC 9 +#define INTD 8 + void __init nslu2_pci_preinit(void) { - set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW); - + set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW); + set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { - static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = { - IRQ_NSLU2_PCI_INTA, - IRQ_NSLU2_PCI_INTB, - IRQ_NSLU2_PCI_INTC, + static int pci_irq_table[IRQ_LINES] = { + IXP4XX_GPIO_IRQ(INTA), + IXP4XX_GPIO_IRQ(INTB), + IXP4XX_GPIO_IRQ(INTC), }; - int irq = -1; - - if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV && - pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) { - irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES]; - } + if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES) + return pci_irq_table[(slot + pin - 2) % IRQ_LINES]; - return irq; + return -1; } struct hw_pci __initdata nslu2_pci = { diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index ff6a08d02cc4..c14e0034be4b 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -26,13 +26,32 @@ #include <linux/i2c.h> #include <linux/i2c-gpio.h> #include <linux/io.h> - #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> #include <asm/mach/time.h> #include <asm/gpio.h> +#define NSLU2_SDA_PIN 7 +#define NSLU2_SCL_PIN 6 + +/* NSLU2 Timer */ +#define NSLU2_FREQ 66000000 + +/* Buttons */ +#define NSLU2_PB_GPIO 5 /* power button */ +#define NSLU2_PO_GPIO 8 /* power off */ +#define NSLU2_RB_GPIO 12 /* reset button */ + +/* Buzzer */ +#define NSLU2_GPIO_BUZZ 4 + +/* LEDs */ +#define NSLU2_LED_RED_GPIO 0 +#define NSLU2_LED_GRN_GPIO 1 +#define NSLU2_LED_DISK1_GPIO 3 +#define NSLU2_LED_DISK2_GPIO 2 + static struct flash_platform_data nslu2_flash_data = { .map_name = "cfi_probe", .width = 2, diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c index 6182f5410b4d..fcaf876f19b6 100644 --- a/arch/arm/mach-lh7a40x/clocks.c +++ b/arch/arm/mach-lh7a40x/clocks.c @@ -7,8 +7,6 @@ * version 2 as published by the Free Software Foundation. * */ - -#include <linux/cpufreq.h> #include <mach/hardware.h> #include <mach/clocks.h> #include <linux/err.h> @@ -31,12 +29,6 @@ struct clk { #define HCLKDIV(c) (((c) >> 0) & 0x02) #define PCLKDIV(c) (((c) >> 16) & 0x03) -unsigned int cpufreq_get (unsigned int cpu) /* in kHz */ -{ - return fclkfreq_get ()/1000; -} -EXPORT_SYMBOL(cpufreq_get); - unsigned int fclkfreq_get (void) { unsigned int clkset = CSC_CLKSET; diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index d140abca690a..f780086befd7 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -3,6 +3,30 @@ if ARCH_MSM comment "MSM Board Type" depends on ARCH_MSM +config MSM_DEBUG_UART + int + default 1 if MSM_DEBUG_UART1 + default 2 if MSM_DEBUG_UART2 + default 3 if MSM_DEBUG_UART3 + +choice + prompt "Debug UART" + + default MSM_DEBUG_UART_NONE + + config MSM_DEBUG_UART_NONE + bool "None" + + config MSM_DEBUG_UART1 + bool "UART1" + + config MSM_DEBUG_UART2 + bool "UART2" + + config MSM_DEBUG_UART3 + bool "UART3" +endchoice + config MACH_HALIBUT depends on ARCH_MSM default y @@ -10,4 +34,10 @@ config MACH_HALIBUT help Support for the Qualcomm SURF7201A eval board. +config MACH_TROUT + default y + bool "HTC Dream (aka trout)" + help + Support for the HTC Dream, T-Mobile G1, Android ADP1 devices. + endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 1aa47001aa3b..91e6f5c95dc1 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -6,3 +6,4 @@ obj-y += clock.o clock-7x01a.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o +obj-$(CONFIG_MACH_TROUT) += board-dream.o diff --git a/arch/arm/mach-msm/board-dream.c b/arch/arm/mach-msm/board-dream.c new file mode 100644 index 000000000000..21afa8513168 --- /dev/null +++ b/arch/arm/mach-msm/board-dream.c @@ -0,0 +1,93 @@ +/* linux/arch/arm/mach-msm/board-dream.c + * + * Copyright (C) 2009 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/setup.h> + +#include <mach/board.h> +#include <mach/hardware.h> +#include <mach/msm_iomap.h> + +#include "devices.h" +#include "board-dream.h" + +static struct platform_device *devices[] __initdata = { + &msm_device_uart3, + &msm_device_smd, + &msm_device_nand, + &msm_device_hsusb, + &msm_device_i2c, +}; + +extern struct sys_timer msm_timer; + +static void __init trout_init_irq(void) +{ + msm_init_irq(); +} + +static void __init trout_fixup(struct machine_desc *desc, struct tag *tags, + char **cmdline, struct meminfo *mi) +{ + mi->nr_banks = 1; + mi->bank[0].start = PHYS_OFFSET; + mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET); + mi->bank[0].size = (101*1024*1024); +} + +static void __init trout_init(void) +{ + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +static struct map_desc trout_io_desc[] __initdata = { + { + .virtual = TROUT_CPLD_BASE, + .pfn = __phys_to_pfn(TROUT_CPLD_START), + .length = TROUT_CPLD_SIZE, + .type = MT_DEVICE_NONSHARED + } +}; + +static void __init trout_map_io(void) +{ + msm_map_common_io(); + iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc)); + +#ifdef CONFIG_MSM_DEBUG_UART3 + /* route UART3 to the "H2W" extended usb connector */ + writeb(0x80, TROUT_CPLD_BASE + 0x00); +#endif + + msm_clock_init(); +} + +MACHINE_START(TROUT, "HTC Dream") + .phys_io = MSM_DEBUG_UART_PHYS, + .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc, + .boot_params = 0x10000100, + .fixup = trout_fixup, + .map_io = trout_map_io, + .init_irq = trout_init_irq, + .init_machine = trout_init, + .timer = &msm_timer, +MACHINE_END diff --git a/arch/arm/mach-msm/board-dream.h b/arch/arm/mach-msm/board-dream.h new file mode 100644 index 000000000000..4f345a5a0a61 --- /dev/null +++ b/arch/arm/mach-msm/board-dream.h @@ -0,0 +1,5 @@ + +#define TROUT_CPLD_BASE 0xE8100000 +#define TROUT_CPLD_START 0x98000000 +#define TROUT_CPLD_SIZE SZ_4K + diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 1db3c97dbc49..d48747ebcd3d 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -14,15 +14,18 @@ * */ + + #include <mach/hardware.h> #include <mach/msm_iomap.h> +#ifdef CONFIG_MSM_DEBUG_UART .macro addruart,rx @ see if the MMU is enabled and select appropriate base address mrc p15, 0, \rx, c1, c0 tst \rx, #1 - ldreq \rx, =MSM_UART1_PHYS - movne \rx, #0 + ldreq \rx, =MSM_DEBUG_UART_PHYS + ldrne \rx, =MSM_DEBUG_UART_BASE .endm .macro senduart,rd,rx @@ -32,13 +35,20 @@ .macro waituart,rd,rx @ wait for TX_READY - teq \rx, #0 - bne 2f -1: ldr \rd, [\rx, #0x08] +1001: ldr \rd, [\rx, #0x08] tst \rd, #0x04 - beq 1b -2: + beq 1001b + .endm +#else + .macro addruart,rx + .endm + + .macro senduart,rd,rx + .endm + + .macro waituart,rd,rx .endm +#endif .macro busyuart,rd,rx .endm diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h new file mode 100644 index 000000000000..0ecf25426284 --- /dev/null +++ b/arch/arm/mach-msm/include/mach/mmc.h @@ -0,0 +1,26 @@ +/* + * arch/arm/include/asm/mach/mmc.h + */ +#ifndef ASMARM_MACH_MMC_H +#define ASMARM_MACH_MMC_H + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio_func.h> + +struct embedded_sdio_data { + struct sdio_cis cis; + struct sdio_cccr cccr; + struct sdio_embedded_func *funcs; + int num_funcs; +}; + +struct mmc_platform_data { + unsigned int ocr_mask; /* available voltages */ + u32 (*translate_vdd)(struct device *, unsigned int); + unsigned int (*status)(struct device *); + struct embedded_sdio_data *embedded_sdio; + int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); +}; + +#endif diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 2f7b4c8620d9..9dae1a98c77a 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -84,6 +84,18 @@ #define MSM_UART3_PHYS 0xA9C00000 #define MSM_UART3_SIZE SZ_4K +#ifdef CONFIG_MSM_DEBUG_UART +#define MSM_DEBUG_UART_BASE 0xE1000000 +#if CONFIG_MSM_DEBUG_UART == 1 +#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS +#elif CONFIG_MSM_DEBUG_UART == 2 +#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS +#elif CONFIG_MSM_DEBUG_UART == 3 +#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS +#endif +#define MSM_DEBUG_UART_SIZE SZ_4K +#endif + #define MSM_SDC1_PHYS 0xA0400000 #define MSM_SDC1_SIZE SZ_4K diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h index 026e8955ace9..d94292c29d8e 100644 --- a/arch/arm/mach-msm/include/mach/uncompress.h +++ b/arch/arm/mach-msm/include/mach/uncompress.h @@ -16,9 +16,16 @@ #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H #include "hardware.h" +#include "linux/io.h" +#include "mach/msm_iomap.h" static void putc(int c) { +#if defined(MSM_DEBUG_UART_PHYS) + unsigned base = MSM_DEBUG_UART_PHYS; + while (!(readl(base + 0x08) & 0x04)) ; + writel(c, base + 0x0c); +#endif } static inline void flush(void) diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 6e7692ff6f2c..1c5e7dac086f 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -42,6 +42,9 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(GPIO1), MSM_DEVICE(GPIO2), MSM_DEVICE(CLK_CTL), +#ifdef CONFIG_MSM_DEBUG_UART + MSM_DEVICE(DEBUG_UART), +#endif { .virtual = (unsigned long) MSM_SHARED_RAM_BASE, .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 87e539aa8ad9..9ce17f13d3f1 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o +obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o +obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -17,6 +18,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + led-y := leds.o # Specific board support @@ -48,3 +52,7 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o obj-$(CONFIG_LEDS) += $(led-y) + +ifneq ($(CONFIG_FB_OMAP),) +obj-y += lcd_dma.o +endif diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index f4b72c1654f5..7e70c3c08da6 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -19,6 +19,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -30,7 +31,6 @@ #include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> -#include <plat/nand.h> #include <plat/keypad.h> #include <plat/common.h> #include <plat/board.h> @@ -100,6 +100,12 @@ static int fsample_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -167,8 +173,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define FSAMPLE_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -178,7 +216,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -190,6 +228,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -233,13 +274,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config fsample_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -250,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 89ba8ec4bbf4..fa7cecea19f9 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/gpio.h> @@ -40,7 +41,6 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/nand.h> #include <plat/irda.h> #include <plat/usb.h> #include <plat/keypad.h> @@ -179,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data h2_nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = h2_nand_partitions, - .nr_parts = ARRAY_SIZE(h2_nand_partitions), +static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H2_NAND_RB_GPIO_PIN 62 + +static int h2_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H2_NAND_RB_GPIO_PIN); +} + +static const char *h2_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data h2_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(h2_nand_partitions), + .partitions = h2_nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = h2_part_probes, + }, + .ctrl = { + .cmd_ctrl = h2_nand_cmd_ctl, + .dev_ready = h2_nand_dev_ready, + + }, }; static struct resource h2_nand_resource = { @@ -191,15 +223,21 @@ static struct resource h2_nand_resource = { }; static struct platform_device h2_nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &h2_nand_data, + .platform_data = &h2_nand_platdata, }, .num_resources = 1, .resource = &h2_nand_resource, }; +static struct smc91x_platdata h2_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource h2_smc91x_resources[] = { [0] = { .start = OMAP1610_ETHR_START, /* Physical */ @@ -216,6 +254,9 @@ static struct resource h2_smc91x_resources[] = { static struct platform_device h2_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &h2_smc91x_info, + }, .num_resources = ARRAY_SIZE(h2_smc91x_resources), .resource = h2_smc91x_resources, }; @@ -368,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { { OMAP_TAG_LCD, &h2_lcd_config }, }; -#define H2_NAND_RB_GPIO_PIN 62 - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f5cc0a730524..6a7f9c391cf1 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -28,6 +28,7 @@ #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> #include <asm/setup.h> #include <asm/page.h> @@ -42,7 +43,6 @@ #include <mach/irqs.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/nand.h> #include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> @@ -181,11 +181,43 @@ static struct mtd_partition nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = nand_partitions, - .nr_parts = ARRAY_SIZE(nand_partitions), +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H3_NAND_RB_GPIO_PIN 10 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H3_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(nand_partitions), + .partitions = nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + + }, }; static struct resource nand_resource = { @@ -193,15 +225,21 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &nand_data, + .platform_data = &nand_platdata, }, .num_resources = 1, .resource = &nand_resource, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = OMAP1710_ETHR_START, /* Physical */ @@ -218,6 +256,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -332,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - static void __init h3_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped @@ -356,7 +390,7 @@ static void __init h3_init(void) nand_resource.end += SZ_4K - 1; if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 5f28a5ceacac..e36639f66150 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -39,6 +39,7 @@ #include <plat/common.h> #include <plat/board.h> #include <plat/keypad.h> +#include <plat/usb.h> #include <mach/irqs.h> @@ -140,6 +141,15 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* USB Device */ +static struct omap_usb_config htcherald_usb_config __initdata = { + .otg = 0, + .register_host = 0, + .register_dev = 1, + .hmc_mode = 4, + .pins[0] = 2, +}; + /* LCD Device resources */ static struct platform_device lcd_device = { .name = "lcd_htcherald", @@ -214,6 +224,57 @@ static void __init htcherald_disable_watchdog(void) } } +#define HTCHERALD_GPIO_USB_EN1 33 +#define HTCHERALD_GPIO_USB_EN2 73 +#define HTCHERALD_GPIO_USB_DM 35 +#define HTCHERALD_GPIO_USB_DP 36 + +static void __init htcherald_usb_enable(void) +{ + unsigned int tries = 20; + unsigned int value = 0; + + /* Request the GPIOs we need to control here */ + if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0) + goto err1; + + if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0) + goto err2; + + if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0) + goto err3; + + if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0) + goto err4; + + /* force USB_EN GPIO to 0 */ + do { + /* output low */ + gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0); + } while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 && + --tries); + + if (value == 1) + printk(KERN_WARNING "Unable to reset USB, trying to continue\n"); + + gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */ + gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */ + gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */ + + goto done; + +err4: + gpio_free(HTCHERALD_GPIO_USB_DM); +err3: + gpio_free(HTCHERALD_GPIO_USB_EN2); +err2: + gpio_free(HTCHERALD_GPIO_USB_EN1); +err1: + printk(KERN_ERR "Unabled to request GPIO for USB\n"); +done: + printk(KERN_INFO "USB setup complete.\n"); +} + static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); @@ -225,6 +286,9 @@ static void __init htcherald_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); + + htcherald_usb_enable(); + omap_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cf0fdb9c182f..2133b006f6a3 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -23,6 +23,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -142,6 +143,11 @@ static struct platform_device innovator_kp_device = { .resource = innovator_kp_resources, }; +static struct smc91x_platdata innovator_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; #ifdef CONFIG_ARCH_OMAP15XX @@ -175,6 +181,9 @@ static struct resource innovator1510_smc91x_resources[] = { static struct platform_device innovator1510_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources), .resource = innovator1510_smc91x_resources, }; @@ -241,6 +250,9 @@ static struct resource innovator1610_smc91x_resources[] = { static struct platform_device innovator1610_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources), .resource = innovator1610_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 5a275bab2dfe..71e1a3fad0ea 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/clk.h> +#include <linux/omapfb.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -32,7 +33,6 @@ #include <plat/keypad.h> #include <plat/common.h> #include <plat/dsp_common.h> -#include <plat/omapfb.h> #include <plat/hwa742.h> #include <plat/lcd_mipid.h> #include <plat/mmc.h> diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 50c92c13e48a..ccea4f448e9a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -33,6 +33,7 @@ #include <linux/irq.h> #include <linux/i2c.h> #include <linux/leds.h> +#include <linux/smc91x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -115,6 +116,12 @@ static struct platform_device osk5912_flash_device = { .resource = &osk_flash_resource, }; +static struct smc91x_platdata osk5912_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource osk5912_smc91x_resources[] = { [0] = { .start = OMAP_OSK_ETHR_START, /* Physical */ @@ -131,6 +138,9 @@ static struct resource osk5912_smc91x_resources[] = { static struct platform_device osk5912_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &osk5912_smc91x_info, + }, .num_resources = ARRAY_SIZE(osk5912_smc91x_resources), .resource = osk5912_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ca7df1e93efc..1387a4f15da9 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -19,6 +19,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -30,7 +31,6 @@ #include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> -#include <plat/nand.h> #include <plat/keypad.h> #include <plat/common.h> #include <plat/board.h> @@ -67,6 +67,12 @@ static int p2_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -134,8 +140,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define P2_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(P2_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -145,7 +183,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -157,6 +195,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -201,13 +242,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -220,7 +254,7 @@ static void __init omap_perseus2_init(void) { if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 35c75c1bd0aa..169183537997 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -22,6 +22,7 @@ #include <linux/reboot.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -106,6 +107,12 @@ static struct platform_device voiceblue_flash_device = { .resource = &voiceblue_flash_resource, }; +static struct smc91x_platdata voiceblue_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, @@ -122,6 +129,9 @@ static struct resource voiceblue_smc91x_resources[] = { static struct platform_device voiceblue_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &voiceblue_smc91x_info, + }, .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), .resource = voiceblue_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 42cbe203da36..2ba9ab953731 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.c * - * Copyright (C) 2004 - 2005 Nokia corporation + * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * * Modified to use omap shared clock framework by @@ -26,12 +26,17 @@ #include <plat/usb.h> #include <plat/clock.h> #include <plat/sram.h> - -static const struct clkops clkops_generic; -static const struct clkops clkops_uart; -static const struct clkops clkops_dspck; +#include <plat/clkdev_omap.h> #include "clock.h" +#include "opp.h" + +__u32 arm_idlect1_mask; +struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; + +/*------------------------------------------------------------------------- + * Omap1 specific clock functions + *-------------------------------------------------------------------------*/ static int clk_omap1_dummy_enable(struct clk *clk) { @@ -42,134 +47,24 @@ static void clk_omap1_dummy_disable(struct clk *clk) { } -static const struct clkops clkops_dummy = { - .enable = clk_omap1_dummy_enable, - .disable = clk_omap1_dummy_disable, -}; - -static struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_dummy, - .flags = RATE_FIXED, -}; - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; +const struct clkops clkops_dummy = { + .enable = clk_omap1_dummy_enable, + .disable = clk_omap1_dummy_disable, }; -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) - -static struct omap_clk omap_clks[] = { - /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), - /* CK_GEN1 clocks */ - CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), - CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), - CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), - CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), - /* CK_GEN2 clocks */ - CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), - /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), - CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), - CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), - CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), - CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), - CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), - CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), - CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), - /* ULPD clocks */ - CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), - CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), - CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), - CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), - CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), - CLK(NULL, "mclk", &mclk_16xx, CK_16XX), - CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), - CLK(NULL, "bclk", &bclk_16xx, CK_16XX), - CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), - CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), - CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), - /* Virtual clocks */ - CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), -}; - -static int omap1_clk_enable_generic(struct clk * clk); -static int omap1_clk_enable(struct clk *clk); -static void omap1_clk_disable_generic(struct clk * clk); -static void omap1_clk_disable(struct clk *clk); - -__u32 arm_idlect1_mask; - -/*------------------------------------------------------------------------- - * Omap1 specific clock functions - *-------------------------------------------------------------------------*/ - -static unsigned long omap1_watchdog_recalc(struct clk *clk) +/* XXX can be replaced with a fixed_divisor_recalc */ +unsigned long omap1_watchdog_recalc(struct clk *clk) { return clk->parent->rate / 14; } -static unsigned long omap1_uart_recalc(struct clk *clk) +unsigned long omap1_uart_recalc(struct clk *clk) { unsigned int val = __raw_readl(clk->enable_reg); return val & clk->enable_bit ? 48000000 : 12000000; } -static unsigned long omap1_sossi_recalc(struct clk *clk) +unsigned long omap1_sossi_recalc(struct clk *clk) { u32 div = omap_readl(MOD_CONF_CTRL_1); @@ -179,64 +74,6 @@ static unsigned long omap1_sossi_recalc(struct clk *clk) return clk->parent->rate / div; } -static int omap1_clk_enable_dsp_domain(struct clk *clk) -{ - int retval; - - retval = omap1_clk_enable(&api_ck.clk); - if (!retval) { - retval = omap1_clk_enable_generic(clk); - omap1_clk_disable(&api_ck.clk); - } - - return retval; -} - -static void omap1_clk_disable_dsp_domain(struct clk *clk) -{ - if (omap1_clk_enable(&api_ck.clk) == 0) { - omap1_clk_disable_generic(clk); - omap1_clk_disable(&api_ck.clk); - } -} - -static const struct clkops clkops_dspck = { - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, -}; - -static int omap1_clk_enable_uart_functional(struct clk *clk) -{ - int ret; - struct uart_clk *uclk; - - ret = omap1_clk_enable_generic(clk); - if (ret == 0) { - /* Set smart idle acknowledgement mode */ - uclk = (struct uart_clk *)clk; - omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, - uclk->sysc_addr); - } - - return ret; -} - -static void omap1_clk_disable_uart_functional(struct clk *clk) -{ - struct uart_clk *uclk; - - /* Set force idle acknowledgement mode */ - uclk = (struct uart_clk *)clk; - omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); - - omap1_clk_disable_generic(clk); -} - -static const struct clkops clkops_uart = { - .enable = &omap1_clk_enable_uart_functional, - .disable = &omap1_clk_disable_uart_functional, -}; - static void omap1_clk_allow_idle(struct clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -344,7 +181,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } -static unsigned long omap1_ckctl_recalc(struct clk *clk) +unsigned long omap1_ckctl_recalc(struct clk *clk) { /* Calculate divisor encoded as 2-bit exponent */ int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); @@ -352,7 +189,7 @@ static unsigned long omap1_ckctl_recalc(struct clk *clk) return clk->parent->rate / dsor; } -static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) +unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) { int dsor; @@ -363,28 +200,29 @@ static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) * Note that DSP_CKCTL virt addr = phys addr, so * we must use __raw_readw() instead of omap_readw(). */ - omap1_clk_enable(&api_ck.clk); + omap1_clk_enable(api_ck_p); dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - omap1_clk_disable(&api_ck.clk); + omap1_clk_disable(api_ck_p); return clk->parent->rate / dsor; } /* MPU virtual clock functions */ -static int omap1_select_table_rate(struct clk * clk, unsigned long rate) +int omap1_select_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate and switch to it */ struct mpu_rate * ptr; + unsigned long dpll1_rate, ref_rate; - if (clk != &virtual_ck_mpu) - return -EINVAL; + dpll1_rate = clk_get_rate(ck_dpll1_p); + ref_rate = clk_get_rate(ck_ref_p); - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) + for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ref_rate) continue; /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) + if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate) continue; /* Can check only after xtal frequency check */ @@ -405,11 +243,13 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - ck_dpll1.rate = ptr->pll_rate; + /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ + ck_dpll1_p->rate = ptr->pll_rate; + return 0; } -static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) { int dsor_exp; u16 regval; @@ -429,7 +269,7 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) return 0; } -static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) { int dsor_exp = calc_dsor_exp(clk, rate); if (dsor_exp < 0) @@ -439,7 +279,7 @@ static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) return clk->parent->rate / (1 << dsor_exp); } -static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) { int dsor_exp; u16 regval; @@ -459,19 +299,19 @@ static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) return 0; } -static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) +long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate */ struct mpu_rate * ptr; - long highest_rate; + long highest_rate; + unsigned long ref_rate; - if (clk != &virtual_ck_mpu) - return -EINVAL; + ref_rate = clk_get_rate(ck_ref_p); highest_rate = -EINVAL; - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) + for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ref_rate) continue; highest_rate = ptr->rate; @@ -506,8 +346,8 @@ static unsigned calc_ext_dsor(unsigned long rate) return dsor; } -/* Only needed on 1510 */ -static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) +/* XXX Only needed on 1510 */ +int omap1_set_uart_rate(struct clk *clk, unsigned long rate) { unsigned int val; @@ -525,7 +365,7 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) } /* External clock (MCLK & BCLK) functions */ -static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) +int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) { unsigned dsor; __u16 ratio_bits; @@ -543,7 +383,7 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) return 0; } -static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) +int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) { u32 l; int div; @@ -566,12 +406,12 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) return 0; } -static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate) +long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) { return 96000000 / calc_ext_dsor(rate); } -static void omap1_init_ext_clk(struct clk * clk) +void omap1_init_ext_clk(struct clk *clk) { unsigned dsor; __u16 ratio_bits; @@ -589,7 +429,7 @@ static void omap1_init_ext_clk(struct clk * clk) clk-> rate = 96000000 / dsor; } -static int omap1_clk_enable(struct clk *clk) +int omap1_clk_enable(struct clk *clk) { int ret = 0; @@ -617,7 +457,7 @@ err: return ret; } -static void omap1_clk_disable(struct clk *clk) +void omap1_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { clk->ops->disable(clk); @@ -672,12 +512,70 @@ static void omap1_clk_disable_generic(struct clk *clk) } } -static const struct clkops clkops_generic = { - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, +const struct clkops clkops_generic = { + .enable = omap1_clk_enable_generic, + .disable = omap1_clk_disable_generic, +}; + +static int omap1_clk_enable_dsp_domain(struct clk *clk) +{ + int retval; + + retval = omap1_clk_enable(api_ck_p); + if (!retval) { + retval = omap1_clk_enable_generic(clk); + omap1_clk_disable(api_ck_p); + } + + return retval; +} + +static void omap1_clk_disable_dsp_domain(struct clk *clk) +{ + if (omap1_clk_enable(api_ck_p) == 0) { + omap1_clk_disable_generic(clk); + omap1_clk_disable(api_ck_p); + } +} + +const struct clkops clkops_dspck = { + .enable = omap1_clk_enable_dsp_domain, + .disable = omap1_clk_disable_dsp_domain, +}; + +static int omap1_clk_enable_uart_functional(struct clk *clk) +{ + int ret; + struct uart_clk *uclk; + + ret = omap1_clk_enable_generic(clk); + if (ret == 0) { + /* Set smart idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, + uclk->sysc_addr); + } + + return ret; +} + +static void omap1_clk_disable_uart_functional(struct clk *clk) +{ + struct uart_clk *uclk; + + /* Set force idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); + + omap1_clk_disable_generic(clk); +} + +const struct clkops clkops_uart = { + .enable = omap1_clk_enable_uart_functional, + .disable = omap1_clk_disable_uart_functional, }; -static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate(struct clk *clk, unsigned long rate) { if (clk->flags & RATE_FIXED) return clk->rate; @@ -688,7 +586,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) return clk->rate; } -static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EINVAL; @@ -703,7 +601,7 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) #ifdef CONFIG_OMAP_RESET_CLOCKS -static void __init omap1_clk_disable_unused(struct clk *clk) +void __init omap1_clk_disable_unused(struct clk *clk) { __u32 regval32; @@ -724,184 +622,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == 0) return; - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */ - || clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */ - || clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */ - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - clk->name); - return; - } - printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); clk->ops->disable(clk); printk(" done\n"); } -#else -#define omap1_clk_disable_unused NULL #endif - -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - -int __init omap1_clk_init(void) -{ - struct omap_clk *c; - const struct omap_clock_config *info; - int crystal_type = 0; /* Default 12 MHz */ - u32 reg, cpu_mask; - -#ifdef CONFIG_DEBUG_LL - /* Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. - */ - omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -#endif - - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - reg = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(reg, SOFT_REQ_REG); - if (!cpu_is_omap15xx()) - omap_writew(0, SOFT_REQ_REG2); - - clk_init(&omap1_clk_functions); - - /* By default all idlect1 clocks are allowed to idle */ - arm_idlect1_mask = ~0; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_preinit(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap16xx()) - cpu_mask |= CK_16XX; - if (cpu_is_omap1510()) - cpu_mask |= CK_1510; - if (cpu_is_omap7xx()) - cpu_mask |= CK_7XX; - if (cpu_is_omap310()) - cpu_mask |= CK_310; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - } - - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap15xx()) - crystal_type = info->system_clock_type; - } - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - ck_ref.rate = 13000000; -#elif defined(CONFIG_ARCH_OMAP16XX) - if (crystal_type == 2) - ck_ref.rate = 19200000; -#endif - - printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", - omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), - omap_readw(ARM_CKCTL)); - - /* We want to be in syncronous scalable mode */ - omap_writew(0x1000, ARM_SYSST); - -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. - */ - { - unsigned pll_ctl_val = omap_readw(DPLL_CTL); - - ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ - if (pll_ctl_val & 0x10) { - /* PLL enabled, apply multiplier and divisor */ - if (pll_ctl_val & 0xf80) - ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; - ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; - } else { - /* PLL disabled, apply bypass divisor */ - switch (pll_ctl_val & 0xc) { - case 0: - break; - case 0x4: - ck_dpll1.rate /= 2; - break; - default: - ck_dpll1.rate /= 4; - break; - } - } - } -#else - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - } -#endif - propagate_rate(&ck_dpll1); - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - -#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); -#endif - - /* Amstrad Delta wants BCLK high when inactive */ - if (machine_is_ams_delta()) - omap_writel(omap_readl(ULPD_CLOCK_CTRL) | - (1 << SDW_MCLK_INV_BIT), - ULPD_CLOCK_CTRL); - - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap7xx()) - omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); - else - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); - - /* Put DSP/MPUI into reset until needed */ - omap_writew(0, ARM_RSTCT1); - omap_writew(1, ARM_RSTCT2); - omap_writew(0x400, ARM_IDLECT1); - - /* - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) - * of the ARM_IDLECT2 register must be set to zero. The power-on - * default value of this bit is one. - */ - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable(&armper_ck.clk); - clk_enable(&armxor_ck.clk); - clk_enable(&armtim_ck.clk); /* This should be done by timer code */ - - if (cpu_is_omap15xx()) - clk_enable(&arm_gpio_ck); - - return 0; -} diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 29ffa97dc7f3..a4190afb8614 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.h * - * Copyright (C) 2004 - 2005 Nokia corporation + * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc * @@ -13,30 +13,36 @@ #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H #define __ARCH_ARM_MACH_OMAP1_CLOCK_H -static unsigned long omap1_ckctl_recalc(struct clk *clk); -static unsigned long omap1_watchdog_recalc(struct clk *clk); -static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); -static unsigned long omap1_sossi_recalc(struct clk *clk); -static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); -static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); -static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); -static unsigned long omap1_uart_recalc(struct clk *clk); -static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); -static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); -static void omap1_init_ext_clk(struct clk * clk); -static int omap1_select_table_rate(struct clk * clk, unsigned long rate); -static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); - -static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); -static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); - -struct mpu_rate { - unsigned long rate; - unsigned long xtal; - unsigned long pll_rate; - __u16 ckctl_val; - __u16 dpllctl_val; -}; +#include <linux/clk.h> + +#include <plat/clock.h> + +extern int __init omap1_clk_init(void); +extern int omap1_clk_enable(struct clk *clk); +extern void omap1_clk_disable(struct clk *clk); +extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_ckctl_recalc(struct clk *clk); +extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_sossi_recalc(struct clk *clk); +extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); +extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); +extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_uart_recalc(struct clk *clk); +extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); +extern void omap1_init_ext_clk(struct clk *clk); +extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern unsigned long omap1_watchdog_recalc(struct clk *clk); + +#ifdef CONFIG_OMAP_RESET_CLOCKS +extern void __init omap1_clk_disable_unused(struct clk *clk); +#else +#define omap1_clk_disable_unused NULL +#endif struct uart_clk { struct clk clk; @@ -96,596 +102,12 @@ struct arm_idlect1_clk { #define SOFT_REQ_REG 0xfffe0834 #define SOFT_REQ_REG2 0xfffe0880 -/*------------------------------------------------------------------------- - * Omap1 MPU rate table - *-------------------------------------------------------------------------*/ -static struct mpu_rate rate_table[] = { - /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL - * NOTE: Comment order here is different from bits in CKCTL value: - * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv - */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif - { 0, 0, 0, 0, 0 }, -}; - -/*------------------------------------------------------------------------- - * Omap1 clocks - *-------------------------------------------------------------------------*/ - -static struct clk ck_ref = { - .name = "ck_ref", - .ops = &clkops_null, - .rate = 12000000, -}; - -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .ops = &clkops_null, - .parent = &ck_ref, -}; - -static struct arm_idlect1_clk ck_dpll1out = { - .clk = { - .name = "ck_dpll1out", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, - }, - .idlect_shift = 12, -}; - -static struct clk sossi_ck = { - .name = "ck_sossi", - .ops = &clkops_generic, - .parent = &ck_dpll1out.clk, - .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), - .enable_bit = 16, - .recalc = &omap1_sossi_recalc, - .set_rate = &omap1_set_sossi_rate, -}; - -static struct clk arm_ck = { - .name = "arm_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_ARMDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk armper_ck = { - .clk = { - .name = "armper_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 2, -}; - -static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk armxor_ck = { - .clk = { - .name = "armxor_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 1, -}; - -static struct arm_idlect1_clk armtim_ck = { - .clk = { - .name = "armtim_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 9, -}; - -static struct arm_idlect1_clk armwdt_ck = { - .clk = { - .name = "armwdt_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_WDTCK, - .recalc = &omap1_watchdog_recalc, - }, - .idlect_shift = 0, -}; - -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &arm_ck, - .recalc = &followparent_recalc, - /* Note: On 16xx the frequency can be divided by 2 by programming - * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 - * - * 1510 version is in TC clocks. - */ -}; - -static struct clk dsp_ck = { - .name = "dsp_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), - .enable_bit = EN_DSPCK, - .rate_offset = CKCTL_DSPDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_DSPMMUDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspper_ck = { - .name = "dspper_ck", - .ops = &clkops_dspck, - .parent = &ck_dpll1, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc_dsp_domain, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = &omap1_clk_set_rate_dsp_domain, -}; - -static struct clk dspxor_ck = { - .name = "dspxor_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk dsptim_ck = { - .name = "dsptim_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, -}; - -/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ -static struct arm_idlect1_clk tc_ck = { - .clk = { - .name = "tc_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .rate_offset = CKCTL_TCDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 6, -}; - -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, - /* Note: On 1510 the frequency follows TC_CK - * - * 16xx version is in MPU clocks. - */ -}; - -static struct clk tipb_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "tipb_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk l3_ocpi_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "l3_ocpi_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, -}; - -static struct clk tc1_ck = { - .name = "tc1_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, -}; +extern __u32 arm_idlect1_mask; +extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -static struct clk tc2_ck = { - .name = "tc2_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, -}; - -static struct clk dma_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "dma_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk api_ck = { - .clk = { - .name = "api_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_APICK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 8, -}; - -static struct arm_idlect1_clk lb_ck = { - .clk = { - .name = "lb_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 4, -}; - -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk lcd_ck_16xx = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk lcd_ck_1510 = { - .clk = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 3, -}; - -static struct clk uart1_1510 = { - .name = "uart1_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct uart_clk uart1_16xx = { - .clk = { - .name = "uart1_ck", - .ops = &clkops_uart, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, - }, - .sysc_addr = 0xfffb0054, -}; - -static struct clk uart2_ck = { - .name = "uart2_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct clk uart3_1510 = { - .name = "uart3_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct uart_clk uart3_16xx = { - .clk = { - .name = "uart3_ck", - .ops = &clkops_uart, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, - }, - .sysc_addr = 0xfffb9854, -}; - -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 6000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), - .enable_bit = USB_MCLK_EN_BIT, -}; - -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = USB_HOST_HHC_UHOST_EN, -}; - -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ - .enable_bit = 8 /* UHOST_EN */, -}; - -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 4, -}; - -static struct clk usb_dc_ck7xx = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 8, -}; - -static struct clk mclk_1510 = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 6, -}; - -static struct clk mclk_16xx = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), - .enable_bit = COM_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk bclk_1510 = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = RATE_FIXED, -}; - -static struct clk bclk_16xx = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), - .enable_bit = SWD_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk mmc1_ck = { - .name = "mmc_ck", - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 23, -}; - -static struct clk mmc2_ck = { - .name = "mmc_ck", - .id = 1, - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 20, -}; - -static struct clk mmc3_ck = { - .name = "mmc_ck", - .id = 2, - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 12, -}; - -static struct clk virtual_ck_mpu = { - .name = "mpu", - .ops = &clkops_null, - .parent = &arm_ck, /* Is smarter alias for */ - .recalc = &followparent_recalc, - .set_rate = &omap1_select_table_rate, - .round_rate = &omap1_round_to_table_rate, -}; - -/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK -remains active during MPU idle whenever this is enabled */ -static struct clk i2c_fck = { - .name = "i2c_fck", - .id = 1, - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armxor_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk i2c_ick = { - .name = "i2c_ick", - .id = 1, - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armper_ck.clk, - .recalc = &followparent_recalc, -}; +extern const struct clkops clkops_dspck; +extern const struct clkops clkops_dummy; +extern const struct clkops clkops_uart; +extern const struct clkops clkops_generic; #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c new file mode 100644 index 000000000000..ab995a9c606c --- /dev/null +++ b/arch/arm/mach-omap1/clock_data.c @@ -0,0 +1,843 @@ +/* + * linux/arch/arm/mach-omap1/clock_data.c + * + * Copyright (C) 2004 - 2005, 2009 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/mach-types.h> /* for machine_is_* */ + +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/clkdev_omap.h> +#include <plat/usb.h> /* for OTG_BASE */ + +#include "clock.h" + +/*------------------------------------------------------------------------ + * Omap1 clocks + *-------------------------------------------------------------------------*/ + +/* XXX is this necessary? */ +static struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_dummy, + .flags = RATE_FIXED, +}; + +static struct clk ck_ref = { + .name = "ck_ref", + .ops = &clkops_null, + .rate = 12000000, +}; + +static struct clk ck_dpll1 = { + .name = "ck_dpll1", + .ops = &clkops_null, + .parent = &ck_ref, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ FIX: SoSSI, SSR ] + */ +static struct arm_idlect1_clk ck_dpll1out = { + .clk = { + .name = "ck_dpll1out", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | + ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_CKOUT_ARM, + .recalc = &followparent_recalc, + }, + .idlect_shift = 12, +}; + +static struct clk sossi_ck = { + .name = "ck_sossi", + .ops = &clkops_generic, + .parent = &ck_dpll1out.clk, + .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), + .enable_bit = 16, + .recalc = &omap1_sossi_recalc, + .set_rate = &omap1_set_sossi_rate, +}; + +static struct clk arm_ck = { + .name = "arm_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_ARMDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk armper_ck = { + .clk = { + .name = "armper_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 2, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ GPIO code for 1510 ] + */ +static struct clk arm_gpio_ck = { + .name = "arm_gpio_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_GPIOCK, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk armxor_ck = { + .clk = { + .name = "armxor_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 1, +}; + +static struct arm_idlect1_clk armtim_ck = { + .clk = { + .name = "armtim_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_TIMCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 9, +}; + +static struct arm_idlect1_clk armwdt_ck = { + .clk = { + .name = "armwdt_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_WDTCK, + .recalc = &omap1_watchdog_recalc, + }, + .idlect_shift = 0, +}; + +static struct clk arminth_ck16xx = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &arm_ck, + .recalc = &followparent_recalc, + /* Note: On 16xx the frequency can be divided by 2 by programming + * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 + * + * 1510 version is in TC clocks. + */ +}; + +static struct clk dsp_ck = { + .name = "dsp_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), + .enable_bit = EN_DSPCK, + .rate_offset = CKCTL_DSPDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspmmu_ck = { + .name = "dspmmu_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_DSPMMUDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspper_ck = { + .name = "dspper_ck", + .ops = &clkops_dspck, + .parent = &ck_dpll1, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc_dsp_domain, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = &omap1_clk_set_rate_dsp_domain, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, +}; + +/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ +static struct arm_idlect1_clk tc_ck = { + .clk = { + .name = "tc_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .rate_offset = CKCTL_TCDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 6, +}; + +static struct clk arminth_ck1510 = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, + /* Note: On 1510 the frequency follows TC_CK + * + * 16xx version is in MPU clocks. + */ +}; + +static struct clk tipb_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "tipb_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk l3_ocpi_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "l3_ocpi_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_OCPI_CK, + .recalc = &followparent_recalc, +}; + +static struct clk tc1_ck = { + .name = "tc1_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC1_CK, + .recalc = &followparent_recalc, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ pm.c (SRAM), CCP, Camera ] + */ +static struct clk tc2_ck = { + .name = "tc2_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC2_CK, + .recalc = &followparent_recalc, +}; + +static struct clk dma_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "dma_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk dma_lcdfree_ck = { + .name = "dma_lcdfree_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk api_ck = { + .clk = { + .name = "api_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_APICK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 8, +}; + +static struct arm_idlect1_clk lb_ck = { + .clk = { + .name = "lb_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LBCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 4, +}; + +static struct clk rhea1_ck = { + .name = "rhea1_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk rhea2_ck = { + .name = "rhea2_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk lcd_ck_16xx = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk lcd_ck_1510 = { + .clk = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 3, +}; + +static struct clk uart1_1510 = { + .name = "uart1_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct uart_clk uart1_16xx = { + .clk = { + .name = "uart1_ck", + .ops = &clkops_uart, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 29, + }, + .sysc_addr = 0xfffb0054, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct clk uart3_1510 = { + .name = "uart3_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct uart_clk uart3_16xx = { + .clk = { + .name = "uart3_ck", + .ops = &clkops_uart, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 31, + }, + .sysc_addr = 0xfffb9854, +}; + +static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ + .name = "usb_clko", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 6000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), + .enable_bit = USB_MCLK_EN_BIT, +}; + +static struct clk usb_hhc_ck1510 = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = USB_HOST_HHC_UHOST_EN, +}; + +static struct clk usb_hhc_ck16xx = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ + .enable_bit = 8 /* UHOST_EN */, +}; + +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 4, +}; + +static struct clk usb_dc_ck7xx = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 8, +}; + +static struct clk mclk_1510 = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 6, +}; + +static struct clk mclk_16xx = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), + .enable_bit = COM_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk bclk_1510 = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = RATE_FIXED, +}; + +static struct clk bclk_16xx = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), + .enable_bit = SWD_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk mmc1_ck = { + .name = "mmc_ck", + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 23, +}; + +static struct clk mmc2_ck = { + .name = "mmc_ck", + .id = 1, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 20, +}; + +static struct clk mmc3_ck = { + .name = "mmc_ck", + .id = 2, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 12, +}; + +static struct clk virtual_ck_mpu = { + .name = "mpu", + .ops = &clkops_null, + .parent = &arm_ck, /* Is smarter alias for */ + .recalc = &followparent_recalc, + .set_rate = &omap1_select_table_rate, + .round_rate = &omap1_round_to_table_rate, +}; + +/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK +remains active during MPU idle whenever this is enabled */ +static struct clk i2c_fck = { + .name = "i2c_fck", + .id = 1, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armxor_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c_ick = { + .name = "i2c_ick", + .id = 1, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armper_ck.clk, + .recalc = &followparent_recalc, +}; + +/* + * clkdev integration + */ + +static struct omap_clk omap_clks[] = { + /* non-ULPD clocks */ + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + /* CK_GEN1 clocks */ + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + /* CK_GEN2 clocks */ + CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + /* CK_GEN3 clocks */ + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), + CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + /* ULPD clocks */ + CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx, CK_16XX), + CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), + CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), + /* Virtual clocks */ + CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), +}; + +/* + * init + */ + +static struct clk_functions omap1_clk_functions __initdata = { + .clk_enable = omap1_clk_enable, + .clk_disable = omap1_clk_disable, + .clk_round_rate = omap1_clk_round_rate, + .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, +}; + +int __init omap1_clk_init(void) +{ + struct omap_clk *c; + const struct omap_clock_config *info; + int crystal_type = 0; /* Default 12 MHz */ + u32 reg, cpu_mask; + +#ifdef CONFIG_DEBUG_LL + /* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. + */ + omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +#endif + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + if (!cpu_is_omap15xx()) + omap_writew(0, SOFT_REQ_REG2); + + clk_init(&omap1_clk_functions); + + /* By default all idlect1 clocks are allowed to idle */ + arm_idlect1_mask = ~0; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + clk_preinit(c->lk.clk); + + cpu_mask = 0; + if (cpu_is_omap16xx()) + cpu_mask |= CK_16XX; + if (cpu_is_omap1510()) + cpu_mask |= CK_1510; + if (cpu_is_omap7xx()) + cpu_mask |= CK_7XX; + if (cpu_is_omap310()) + cpu_mask |= CK_310; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + } + + /* Pointers to these clocks are needed by code in clock.c */ + api_ck_p = clk_get(NULL, "api_ck"); + ck_dpll1_p = clk_get(NULL, "ck_dpll1"); + ck_ref_p = clk_get(NULL, "ck_ref"); + + info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); + if (info != NULL) { + if (!cpu_is_omap15xx()) + crystal_type = info->system_clock_type; + } + +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + ck_ref.rate = 13000000; +#elif defined(CONFIG_ARCH_OMAP16XX) + if (crystal_type == 2) + ck_ref.rate = 19200000; +#endif + + pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: " + "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + + /* We want to be in syncronous scalable mode */ + omap_writew(0x1000, ARM_SYSST); + +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } +#else + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + printk(KERN_ERR "System frequencies not set. Check your config.\n"); + /* Guess sane values (60MHz) */ + omap_writew(0x2290, DPLL_CTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = 60000000; + } +#endif + propagate_rate(&ck_dpll1); + /* Cache rates for clocks connected to ck_ref (not dpll1) */ + propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); + +#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); +#endif + + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + /* (on 730, bit 13 must not be cleared) */ + if (cpu_is_omap7xx()) + omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); + else + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + + /* Put DSP/MPUI into reset until needed */ + omap_writew(0, ARM_RSTCT1); + omap_writew(1, ARM_RSTCT2); + omap_writew(0x400, ARM_IDLECT1); + + /* + * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) + * of the ARM_IDLECT2 register must be set to zero. The power-on + * default value of this bit is one. + */ + omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable(&armper_ck.clk); + clk_enable(&armxor_ck.clk); + clk_enable(&armtim_ck.clk); /* This should be done by timer code */ + + if (cpu_is_omap15xx()) + clk_enable(&arm_gpio_ck); + + return 0; +} diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c new file mode 100644 index 000000000000..1bf4735e27a6 --- /dev/null +++ b/arch/arm/mach-omap1/i2c.c @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/i2c.h> +#include <plat/mux.h> +#include <plat/cpu.h> + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap7xx()) { + omap_cfg_reg(I2C_7XX_SDA); + omap_cfg_reg(I2C_7XX_SCL); + } else { + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h new file mode 100644 index 000000000000..d7a457bbcb7f --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-omap1/include/mach/lcd_dma.h + * + * Extracted from arch/arm/plat-omap/include/plat/dma.h + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_OMAP1_LCD_DMA_H__ +#define __MACH_OMAP1_LCD_DMA_H__ + +/* Hardware registers for LCD DMA */ +#define OMAP1510_DMA_LCD_BASE (0xfffedb00) +#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) +#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) +#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) +#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) +#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) + +#define OMAP1610_DMA_LCD_BASE (0xfffee300) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) +#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) +#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) +#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) +#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) +#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) +#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) +#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) +#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) +#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) +#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) +#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) +#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) +#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) +#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) +#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) + +/* LCD DMA block numbers */ +enum { + OMAP_LCD_DMA_B1_TOP, + OMAP_LCD_DMA_B1_BOTTOM, + OMAP_LCD_DMA_B2_TOP, + OMAP_LCD_DMA_B2_BOTTOM +}; + +/* LCD DMA functions */ +extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data); +extern void omap_free_lcd_dma(void); +extern void omap_setup_lcd_dma(void); +extern void omap_enable_lcd_dma(void); +extern void omap_stop_lcd_dma(void); +extern void omap_set_lcd_dma_ext_controller(int external); +extern void omap_set_lcd_dma_single_transfer(int single); +extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type); +extern void omap_set_lcd_dma_b1_rotation(int rotate); +extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); +extern void omap_set_lcd_dma_b1_mirror(int mirror); +extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); + +extern int omap_lcd_dma_running(void); + +#endif /* __MACH_OMAP1_LCD_DMA_H__ */ diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h new file mode 100644 index 000000000000..89bd703adaf6 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcdc.h @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-omap1/include/mach/lcdc.h + * + * Extracted from drivers/video/omap/lcdc.c + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __MACH_LCDC_H__ +#define __MACH_LCDC_H__ + +#define OMAP_LCDC_BASE 0xfffec000 +#define OMAP_LCDC_SIZE 256 +#define OMAP_LCDC_IRQ INT_LCD_CTRL + +#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) +#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) +#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) +#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) +#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) +#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) +#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) +#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) + +#define OMAP_LCDC_STAT_DONE (1 << 0) +#define OMAP_LCDC_STAT_VSYNC (1 << 1) +#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) +#define OMAP_LCDC_STAT_ABC (1 << 3) +#define OMAP_LCDC_STAT_LINE_INT (1 << 4) +#define OMAP_LCDC_STAT_FUF (1 << 5) +#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) + +#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) +#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) +#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) + +#define OMAP_LCDC_IRQ_VSYNC (1 << 2) +#define OMAP_LCDC_IRQ_DONE (1 << 3) +#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) +#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) +#define OMAP_LCDC_IRQ_LINE (1 << 6) +#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) + +#endif /* __MACH_LCDC_H__ */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 2a6d68aa3489..d9b8d82530ae 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,8 @@ #include <plat/mux.h> #include <plat/tc.h> -extern int omap1_clk_init(void); +#include "clock.h" + extern void omap_check_revision(void); extern void omap_sram_init(void); extern void omapfb_reserve_sdram(void); diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c new file mode 100644 index 000000000000..3be11af687bb --- /dev/null +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -0,0 +1,448 @@ +/* + * linux/arch/arm/mach-omap1/lcd_dma.c + * + * Extracted from arch/arm/plat-omap/dma.c + * Copyright (C) 2003 - 2008 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> + * Graphics DMA and LCD DMA graphics tranformations + * by Imre Deak <imre.deak@nokia.com> + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> + * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Support functions for the OMAP internal DMA channels. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/lcdc.h> +#include <plat/dma.h> + +int omap_lcd_dma_running(void) +{ + /* + * On OMAP1510, internal LCD controller will start the transfer + * when it gets enabled, so assume DMA running if LCD enabled. + */ + if (cpu_is_omap1510()) + if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) + return 1; + + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; + + return 0; +} + +static struct lcd_dma_info { + spinlock_t lock; + int reserved; + void (*callback)(u16 status, void *data); + void *cb_data; + + int active; + unsigned long addr, size; + int rotate, data_type, xres, yres; + int vxres; + int mirror; + int xscale, yscale; + int ext_ctrl; + int src_port; + int single_transfer; +} lcd_dma; + +void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type) +{ + lcd_dma.addr = addr; + lcd_dma.data_type = data_type; + lcd_dma.xres = fb_xres; + lcd_dma.yres = fb_yres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1); + +void omap_set_lcd_dma_src_port(int port) +{ + lcd_dma.src_port = port; +} + +void omap_set_lcd_dma_ext_controller(int external) +{ + lcd_dma.ext_ctrl = external; +} +EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); + +void omap_set_lcd_dma_single_transfer(int single) +{ + lcd_dma.single_transfer = single; +} +EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); + +void omap_set_lcd_dma_b1_rotation(int rotate) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); + BUG(); + return; + } + lcd_dma.rotate = rotate; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); + +void omap_set_lcd_dma_b1_mirror(int mirror) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.mirror = mirror; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); + +void omap_set_lcd_dma_b1_vxres(unsigned long vxres) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA virtual resulotion is not supported " + "in 1510 mode\n"); + BUG(); + } + lcd_dma.vxres = vxres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); + +void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.xscale = xscale; + lcd_dma.yscale = yscale; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); + +static void set_b1_regs(void) +{ + unsigned long top, bottom; + int es; + u16 w; + unsigned long en, fn; + long ei, fi; + unsigned long vxres; + unsigned int xscale, yscale; + + switch (lcd_dma.data_type) { + case OMAP_DMA_DATA_TYPE_S8: + es = 1; + break; + case OMAP_DMA_DATA_TYPE_S16: + es = 2; + break; + case OMAP_DMA_DATA_TYPE_S32: + es = 4; + break; + default: + BUG(); + return; + } + + vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; + xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; + yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; + BUG_ON(vxres < lcd_dma.xres); + +#define PIXADDR(x, y) (lcd_dma.addr + \ + ((y) * vxres * yscale + (x) * xscale) * es) +#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) + + switch (lcd_dma.rotate) { + case 0: + if (!lcd_dma.mirror) { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + /* 1510 DMA requires the bottom address to be 2 more + * than the actual last memory access location. */ + if (cpu_is_omap1510() && + lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) + bottom += 2; + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 90: + if (!lcd_dma.mirror) { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + case 180: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); + } else { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 270: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); + } else { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + default: + BUG(); + return; /* Suppress warning about uninitialized vars */ + } + + if (cpu_is_omap1510()) { + omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); + omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); + omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); + omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); + + return; + } + + /* 1610 regs */ + omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); + omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); + omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); + omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); + + omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); + omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); + + w = omap_readw(OMAP1610_DMA_LCD_CSDP); + w &= ~0x03; + w |= lcd_dma.data_type; + omap_writew(w, OMAP1610_DMA_LCD_CSDP); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + /* Always set the source port as SDRAM for now*/ + w &= ~(0x03 << 6); + if (lcd_dma.callback != NULL) + w |= 1 << 1; /* Block interrupt enable */ + else + w &= ~(1 << 1); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + if (!(lcd_dma.rotate || lcd_dma.mirror || + lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* Set the double-indexed addressing mode */ + w |= (0x03 << 12); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); + omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); + omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); +} + +static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) +{ + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + if (unlikely(!(w & (1 << 3)))) { + printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); + return IRQ_NONE; + } + /* Ack the IRQ */ + w |= (1 << 3); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 0; + if (lcd_dma.callback != NULL) + lcd_dma.callback(w, lcd_dma.cb_data); + + return IRQ_HANDLED; +} + +int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data) +{ + spin_lock_irq(&lcd_dma.lock); + if (lcd_dma.reserved) { + spin_unlock_irq(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA channel already reserved\n"); + BUG(); + return -EBUSY; + } + lcd_dma.reserved = 1; + spin_unlock_irq(&lcd_dma.lock); + lcd_dma.callback = callback; + lcd_dma.cb_data = data; + lcd_dma.active = 0; + lcd_dma.single_transfer = 0; + lcd_dma.rotate = 0; + lcd_dma.vxres = 0; + lcd_dma.mirror = 0; + lcd_dma.xscale = 0; + lcd_dma.yscale = 0; + lcd_dma.ext_ctrl = 0; + lcd_dma.src_port = 0; + + return 0; +} +EXPORT_SYMBOL(omap_request_lcd_dma); + +void omap_free_lcd_dma(void) +{ + spin_lock(&lcd_dma.lock); + if (!lcd_dma.reserved) { + spin_unlock(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA is not reserved\n"); + BUG(); + return; + } + if (!cpu_is_omap1510()) + omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, + OMAP1610_DMA_LCD_CCR); + lcd_dma.reserved = 0; + spin_unlock(&lcd_dma.lock); +} +EXPORT_SYMBOL(omap_free_lcd_dma); + +void omap_enable_lcd_dma(void) +{ + u16 w; + + /* + * Set the Enable bit only if an external controller is + * connected. Otherwise the OMAP internal controller will + * start the transfer when it gets enabled. + */ + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w |= 1 << 8; + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + lcd_dma.active = 1; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w |= 1 << 7; + omap_writew(w, OMAP1610_DMA_LCD_CCR); +} +EXPORT_SYMBOL(omap_enable_lcd_dma); + +void omap_setup_lcd_dma(void) +{ + BUG_ON(lcd_dma.active); + if (!cpu_is_omap1510()) { + /* Set some reasonable defaults */ + omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); + omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); + omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); + } + set_b1_regs(); + if (!cpu_is_omap1510()) { + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* + * If DMA was already active set the end_prog bit to have + * the programmed register set loaded into the active + * register set. + */ + w |= 1 << 11; /* End_prog */ + if (!lcd_dma.single_transfer) + w |= (3 << 8); /* Auto_init, repeat */ + omap_writew(w, OMAP1610_DMA_LCD_CCR); + } +} +EXPORT_SYMBOL(omap_setup_lcd_dma); + +void omap_stop_lcd_dma(void) +{ + u16 w; + + lcd_dma.active = 0; + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w &= ~(1 << 7); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); +} +EXPORT_SYMBOL(omap_stop_lcd_dma); + +static int __init omap_init_lcd_dma(void) +{ + int r; + + if (cpu_is_omap16xx()) { + u16 w; + + /* this would prevent OMAP sleep */ + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + } + + spin_lock_init(&lcd_dma.lock); + + r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, + "LCD DMA", NULL); + if (r != 0) + printk(KERN_ERR "unable to request IRQ for LCD DMA " + "(error %d)\n", r); + + return r; +} + +arch_initcall(omap_init_lcd_dma); + diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 785371e982fc..07212cc621ae 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -50,12 +50,18 @@ MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 6, 28, 1, 0) +MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3, 3, 1, 2, 0, 0) +MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) /* MMC Pins */ MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) + +/* I2C interface */ +MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) +MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h new file mode 100644 index 000000000000..07074d79adce --- /dev/null +++ b/arch/arm/mach-omap1/opp.h @@ -0,0 +1,28 @@ +/* + * linux/arch/arm/mach-omap1/opp.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H +#define __ARCH_ARM_MACH_OMAP1_OPP_H + +#include <linux/types.h> + +struct mpu_rate { + unsigned long rate; + unsigned long xtal; + unsigned long pll_rate; + __u16 ckctl_val; + __u16 dpllctl_val; +}; + +extern struct mpu_rate omap1_rate_table[]; + +#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c new file mode 100644 index 000000000000..75a546514994 --- /dev/null +++ b/arch/arm/mach-omap1/opp_data.c @@ -0,0 +1,59 @@ +/* + * linux/arch/arm/mach-omap1/opp_data.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "opp.h" + +/*------------------------------------------------------------------------- + * Omap1 MPU rate table + *-------------------------------------------------------------------------*/ +struct mpu_rate omap1_rate_table[] = { + /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL + * NOTE: Comment order here is different from bits in CKCTL value: + * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv + */ +#if defined(CONFIG_OMAP_ARM_216MHZ) + { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_195MHZ) + { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_192MHZ) + { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ + { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ + { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ + { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_182MHZ) + { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_168MHZ) + { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_150MHZ) + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_120MHZ) + { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_96MHZ) + { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_60MHZ) + { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_30MHZ) + { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ +#endif + { 0, 0, 0, 0, 0 }, +}; + diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7309aab305a9..76c11ee113e9 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -24,6 +24,18 @@ config ARCH_OMAP3430 depends on ARCH_OMAP3 && ARCH_OMAP34XX select ARCH_OMAP_OTG +config OMAP_PACKAGE_CBC + bool + +config OMAP_PACKAGE_CBB + bool + +config OMAP_PACKAGE_CUS + bool + +config OMAP_PACKAGE_CBP + bool + comment "OMAP Board Type" depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 @@ -52,14 +64,17 @@ config MACH_OMAP_2430SDP config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3EVM bool "OMAP 3530 EVM board" @@ -68,14 +83,22 @@ config MACH_OMAP3EVM config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB + +config MACH_OMAP3_TOUCHBOOK + bool "OMAP3 Touch Book" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_NOKIA_N800 bool @@ -96,26 +119,33 @@ config MACH_NOKIA_N8X0 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_CM_T35 bool "CompuLab CM-T35 module" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS + select OMAP_MUX config MACH_IGEP0020 bool "IGEP0020" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" @@ -128,3 +158,15 @@ config OMAP3_EMU help Say Y here to enable debugging hardware of omap3 +config OMAP3_SDRC_AC_TIMING + bool "Enable SDRC AC timing register changes" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + default n + help + If you know that none of your system initiators will attempt to + access SDRAM during CORE DVFS, select Y here. This should boost + SDRAM performance at lower CORE OPPs. There are relatively few + users who will wish to say yes at this point - almost everyone will + wish to say no. Selecting yes without understanding what is + going on could result in system crashes; + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 32548a4510c5..b32678b848bc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -6,11 +6,14 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o omap-2-3-common = irq.o sdrc.o omap_hwmod.o +omap-3-4-common = dpll.o prcm-common = prcm.o powerdomain.o -clock-common = clock.o clockdomain.o +clock-common = clock.o clock_common_data.o clockdomain.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) -obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \ + $(omap-3-4-common) +obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -23,6 +26,9 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o +# Pin multiplexing +obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o + # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o @@ -41,8 +47,11 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o # Clock framework -obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o -obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o +obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o +obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o +obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o +obj-$(CONFIG_ARCH_OMAP4) += clock44xx.o clock44xx_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o @@ -55,6 +64,9 @@ iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -93,7 +105,8 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ mmc-twl4030.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ mmc-twl4030.o - +obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index db9374bc528b..e508904fb67e 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -19,7 +19,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/delay.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 491364e44c7d..c90b0d0b1927 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -20,7 +20,7 @@ #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <linux/io.h> #include <linux/gpio.h> @@ -31,16 +31,17 @@ #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/board.h> #include <plat/usb.h> #include <plat/common.h> #include <plat/dma.h> #include <plat/gpmc.h> +#include <plat/display.h> #include <plat/control.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = { }, }; -static struct platform_device sdp3430_lcd_device = { - .name = "sdp2430_lcd", - .id = -1, + +#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 +#define SDP3430_LCD_PANEL_ENABLE_GPIO 5 + +static unsigned backlight_gpio; +static unsigned enable_gpio; +static int lcd_enabled; +static int dvi_enabled; + +static void __init sdp3430_display_init(void) +{ + int r; + + enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; + backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; + + r = gpio_request(enable_gpio, "LCD reset"); + if (r) { + printk(KERN_ERR "failed to get LCD reset GPIO\n"); + goto err0; + } + + r = gpio_request(backlight_gpio, "LCD Backlight"); + if (r) { + printk(KERN_ERR "failed to get LCD backlight GPIO\n"); + goto err1; + } + + gpio_direction_output(enable_gpio, 0); + gpio_direction_output(backlight_gpio, 0); + + return; +err1: + gpio_free(enable_gpio); +err0: + return; +} + +static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_direction_output(enable_gpio, 1); + gpio_direction_output(backlight_gpio, 1); + + lcd_enabled = 1; + + return 0; +} + +static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + lcd_enabled = 0; + + gpio_direction_output(enable_gpio, 0); + gpio_direction_output(backlight_gpio, 0); +} + +static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + + dvi_enabled = 1; + + return 0; +} + +static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) +{ +} + + +static struct omap_dss_device sdp3430_lcd_device = { + .name = "lcd", + .driver_name = "sharp_ls_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 16, + .platform_enable = sdp3430_panel_enable_lcd, + .platform_disable = sdp3430_panel_disable_lcd, }; -static struct regulator_consumer_supply sdp3430_vdac_supply = { - .supply = "vdac", - .dev = &sdp3430_lcd_device.dev, +static struct omap_dss_device sdp3430_dvi_device = { + .name = "dvi", + .driver_name = "generic_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = sdp3430_panel_enable_dvi, + .platform_disable = sdp3430_panel_disable_dvi, }; -static struct regulator_consumer_supply sdp3430_vdvi_supply = { - .supply = "vdvi", - .dev = &sdp3430_lcd_device.dev, +static struct omap_dss_device sdp3430_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .platform_enable = sdp3430_panel_enable_tv, + .platform_disable = sdp3430_panel_disable_tv, }; -static struct platform_device *sdp3430_devices[] __initdata = { + +static struct omap_dss_device *sdp3430_dss_devices[] = { &sdp3430_lcd_device, + &sdp3430_dvi_device, + &sdp3430_tv_device, +}; + +static struct omap_dss_board_info sdp3430_dss_data = { + .num_devices = ARRAY_SIZE(sdp3430_dss_devices), + .devices = sdp3430_dss_devices, + .default_device = &sdp3430_lcd_device, }; -static struct omap_lcd_config sdp3430_lcd_config __initdata = { - .ctrl_name = "internal", +static struct platform_device sdp3430_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &sdp3430_dss_data, + }, +}; + +static struct regulator_consumer_supply sdp3430_vdda_dac_supply = { + .supply = "vdda_dac", + .dev = &sdp3430_dss_device.dev, +}; + +static struct platform_device *sdp3430_devices[] __initdata = { + &sdp3430_dss_device, }; static struct omap_board_config_kernel sdp3430_config[] __initdata = { - { OMAP_TAG_LCD, &sdp3430_lcd_config }, }; static void __init omap_3430sdp_init_irq(void) @@ -392,22 +514,34 @@ static struct regulator_init_data sdp3430_vdac = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vdac_supply, + .consumer_supplies = &sdp3430_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ +static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { + { + .supply = "vdvi", + .dev = &sdp3430_lcd_device.dev, + }, + { + .supply = "vdds_dsi", + .dev = &sdp3430_dss_device.dev, + } +}; + static struct regulator_init_data sdp3430_vpll2 = { .constraints = { .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, + .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &sdp3430_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), + .consumer_supplies = sdp3430_vpll2_supplies, }; static struct twl4030_codec_audio_data sdp3430_audio = { @@ -491,7 +625,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -506,8 +642,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_3430sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); if (omap_rev() > OMAP3430_REV_ES1_0) @@ -521,6 +666,7 @@ static void __init omap_3430sdp_init(void) omap_serial_init(); usb_musb_init(); board_smc91x_init(); + sdp3430_display_init(); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); } diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 348b70b98336..739059632811 100755 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -23,6 +23,7 @@ #include <mach/board-zoom.h> +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) @@ -48,7 +49,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -82,8 +85,17 @@ static void __init omap_sdp_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 415a13d767cc..b4e6eca0e8a9 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -30,6 +30,8 @@ #include <plat/common.h> #include <plat/usb.h> +#include "mux.h" + /* * Board initialization */ @@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init am3517_evm_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 8a2ce77a02ec..fbbd68d69cc8 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,6 +26,7 @@ #include <linux/leds.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -120,6 +121,12 @@ static void __init apollon_flash_init(void) apollon_flash_resource[0].end = base + SZ_128K - 1; } +static struct smc91x_platdata appolon_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource apollon_smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -134,6 +141,9 @@ static struct resource apollon_smc91x_resources[] = { static struct platform_device apollon_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &appolon_smc91x_info, + }, .num_resources = ARRAY_SIZE(apollon_smc91x_resources), .resource = apollon_smc91x_resources, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 22c45290db63..1591aae64500 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -38,13 +38,13 @@ #include <plat/board.h> #include <plat/common.h> -#include <plat/mux.h> #include <plat/nand.h> #include <plat/gpmc.h> #include <plat/usb.h> #include <mach/hardware.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -482,8 +482,102 @@ static void __init cm_t35_map_io(void) omap2_map_common_io(); } +static struct omap_board_mux board_mux[] __initdata = { + /* nCS and IRQ for CM-T35 ethernet */ + OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), + OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* nCS and IRQ for SB-T35 ethernet */ + OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), + OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* PENDOWN GPIO */ + OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* MMC 2 */ + OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + + /* McSPI 1 */ + OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + + /* McSPI 4 */ + OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), + + /* McBSP 2 */ + OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* serial ports */ + OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* DSS */ + OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* TPS IRQ */ + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ + OMAP_PIN_INPUT_PULLUP), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + static void __init cm_t35_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); @@ -492,8 +586,6 @@ static void __init cm_t35_init(void) cm_t35_init_led(); usb_musb_init(); - - omap_cfg_reg(AF26_34XX_SYS_NIRQ); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fa62e80c13b7..44239e3ec02e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -27,9 +27,9 @@ #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> -#include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define IGEP2_SMSC911X_CS 5 @@ -203,8 +203,17 @@ static int __init igep2_i2c_init(void) return 0; } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init igep2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); igep2_i2c_init(); omap_serial_init(); usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c062238fe881..995d4a2b2dfd 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -24,7 +24,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/io.h> #include <linux/smsc911x.h> @@ -43,6 +43,7 @@ #include <plat/control.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define LDP_SMSC911X_CS 1 @@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_ldp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 41480bd0e58a..231cb4ec1847 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -29,7 +29,7 @@ #include <linux/mtd/nand.h> #include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -41,10 +41,10 @@ #include <plat/common.h> #include <plat/gpmc.h> #include <plat/nand.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/timer-gp.h> +#include "mux.h" #include "mmc-twl4030.h" #define GPMC_CS0_BASE 0x60 @@ -140,10 +140,10 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_cfg_reg(AG9_34XX_GPIO23); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { - omap_cfg_reg(AH8_34XX_GPIO29); + omap_mux_init_gpio(29, OMAP_PIN_INPUT); } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -422,14 +422,23 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_beagle_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_serial_init(); - omap_cfg_reg(J25_34XX_GPIO170); + omap_mux_init_gpio(170, OMAP_PIN_INPUT); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); @@ -439,8 +448,8 @@ static void __init omap3_beagle_init(void) omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5efc2e9068db..18913e96e34d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -38,11 +38,11 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/common.h> #include <plat/mcspi.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -223,7 +223,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(L8_34XX_GPIO63); + omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); @@ -422,9 +422,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_evm_i2c_init(); @@ -440,24 +449,24 @@ static void __init omap3_evm_init(void) #endif if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_cfg_reg(AF9_34XX_GPIO22); + omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); /* Select EHCI port on main board */ - omap_cfg_reg(U3_34XX_GPIO61); + omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); /* setup EHCI phy reset config */ - omap_cfg_reg(AH14_34XX_GPIO21); + omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); ehci_pdata.reset_gpio_port[1] = 21; } else { /* setup EHCI phy reset on MDC */ - omap_cfg_reg(AF4_34XX_GPIO135_OUT); + omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); ehci_pdata.reset_gpio_port[1] = 135; } usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2db5ba5b3bf7..ef17cf1ab6d7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -24,7 +24,7 @@ #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/leds.h> #include <linux/input.h> #include <linux/input/matrix_keypad.h> @@ -40,8 +40,8 @@ #include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> -#include <plat/mux.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -98,10 +98,10 @@ static struct gpio_keys_button pandora_gpio_keys[] = { GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), - GPIO_BUTTON_LOW(111, BTN_A, "a"), - GPIO_BUTTON_LOW(106, BTN_B, "b"), - GPIO_BUTTON_LOW(109, BTN_X, "x"), - GPIO_BUTTON_LOW(101, BTN_Y, "y"), + GPIO_BUTTON_LOW(109, KEY_KP1, "game 1"), + GPIO_BUTTON_LOW(111, KEY_KP2, "game 2"), + GPIO_BUTTON_LOW(106, KEY_KP3, "game 3"), + GPIO_BUTTON_LOW(101, KEY_KP4, "game 4"), GPIO_BUTTON_LOW(102, BTN_TL, "l"), GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), GPIO_BUTTON_LOW(105, BTN_TR, "r"), @@ -315,7 +315,7 @@ static int __init omap3pandora_i2c_init(void) omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, ARRAY_SIZE(omap3pandora_i2c_boardinfo)); /* i2c2 pins are not connected */ - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } @@ -368,23 +368,8 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { } }; -static struct platform_device omap3pandora_lcd_device = { - .name = "pandora_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3pandora_lcd_config __initdata = { - .ctrl_name = "internal", -}; - -static struct omap_board_config_kernel omap3pandora_config[] __initdata = { - { OMAP_TAG_LCD, &omap3pandora_lcd_config }, -}; - static void __init omap3pandora_init_irq(void) { - omap_board_config = omap3pandora_config; - omap_board_config_size = ARRAY_SIZE(omap3pandora_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -392,7 +377,6 @@ static void __init omap3pandora_init_irq(void) } static struct platform_device *omap3pandora_devices[] __initdata = { - &omap3pandora_lcd_device, &pandora_leds_gpio, &pandora_keys_gpio, }; @@ -409,8 +393,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3pandora_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); @@ -423,8 +416,8 @@ static void __init omap3pandora_init(void) usb_musb_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c new file mode 100644 index 000000000000..c9e5ebb4d91d --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -0,0 +1,572 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3touchbook.c + * + * Copyright (C) 2009 Always Innovating + * + * Modified from mach-omap2/board-omap3beagleboard.c + * + * Initial code: Grégoire Gentil, Tim Yamin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <plat/mcspi.h> +#include <linux/spi/spi.h> + +#include <linux/spi/ads7846.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/usb.h> +#include <plat/timer-gp.h> + +#include "mux.h" +#include "mmc-twl4030.h" + +#include <asm/setup.h> + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define OMAP3_AC_GPIO 136 +#define OMAP3_TS_GPIO 162 +#define TB_BL_PWM_TIMER 9 +#define TB_KILL_POWER_GPIO 168 + +unsigned long touchbook_revision; + +static struct mtd_partition omap3touchbook_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3touchbook_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3touchbook_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3touchbook_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3touchbook_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3touchbook_nand_data, + }, + .num_resources = 1, + .resource = &omap3touchbook_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = 29, + }, + {} /* Terminator */ +}; + +static struct platform_device omap3_touchbook_lcd_device = { + .name = "omap3touchbook_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct regulator_consumer_supply touchbook_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply touchbook_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct gpio_led gpio_leds[]; + +static int touchbook_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_wp = 23; + } else { + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + } + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters */ + touchbook_vmmc1_supply.dev = mmc[0].dev; + touchbook_vsim_supply.dev = mmc[0].dev; + + /* REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + + gpio_request(gpio + 1, "EHCI_nOC"); + gpio_direction_input(gpio + 1); + + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + return 0; +} + +static struct twl4030_gpio_platform_data touchbook_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = touchbook_twl_gpio_setup, +}; + +static struct regulator_consumer_supply touchbook_vdac_supply = { + .supply = "vdac", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +static struct regulator_consumer_supply touchbook_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data touchbook_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data touchbook_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data touchbook_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data touchbook_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdvi_supply, +}; + +static struct twl4030_usb_data touchbook_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_codec_audio_data touchbook_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data touchbook_codec_data = { + .audio_mclk = 26000000, + .audio = &touchbook_audio_data, +}; + +static struct twl4030_platform_data touchbook_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &touchbook_usb_data, + .gpio = &touchbook_gpio_data, + .codec = &touchbook_codec_data, + .vmmc1 = &touchbook_vmmc1, + .vsim = &touchbook_vsim, + .vdac = &touchbook_vdac, + .vpll2 = &touchbook_vpll2, +}; + +static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &touchbook_twldata, + }, +}; + +static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("bq27200", 0x55), + }, +}; + +static int __init omap3_touchbook_i2c_init(void) +{ + /* Standard TouchBook bus */ + omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, + ARRAY_SIZE(touchbook_i2c_boardinfo)); + + /* Additional TouchBook bus */ + omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, + ARRAY_SIZE(touchBook_i2c_boardinfo)); + + return 0; +} + +static void __init omap3_ads7846_init(void) +{ + if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { + printk(KERN_ERR "Failed to request GPIO %d for " + "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); + return; + } + + gpio_direction_input(OMAP3_TS_GPIO); + omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); +} + +static struct ads7846_platform_data ads7846_config = { + .x_min = 100, + .y_min = 265, + .x_max = 3950, + .y_max = 3750, + .x_plate_ohms = 40, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 5, + .debounce_rep = 1, + .gpio_pendown = OMAP3_TS_GPIO, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 4, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), + .platform_data = &ads7846_config, + } +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "touchbook::usr0", + .default_trigger = "heartbeat", + .gpio = 150, + }, + { + .name = "touchbook::usr1", + .default_trigger = "mmc0", + .gpio = 149, + }, + { + .name = "touchbook::pmu_stat", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, + { + .code = KEY_POWER, + .gpio = 183, + .desc = "power", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = { + { OMAP_TAG_LCD, &omap3_touchbook_lcd_config }, +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init omap3_touchbook_init_irq(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = omap3_touchbook_config; + omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif + omap_gpio_init(); +} + +static struct platform_device *omap3_touchbook_devices[] __initdata = { + &omap3_touchbook_lcd_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3touchbook_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3touchbook_nand_data.cs = nandcs; + omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3touchbook_nand_data.gpmc_baseaddr = + (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3touchbook_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL +}; + +static void omap3_touchbook_poweroff(void) +{ + int r; + + r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get kill power GPIO\n"); + return; + } + + gpio_direction_output(TB_KILL_POWER_GPIO, 0); +} + +static void __init early_touchbook_revision(char **p) +{ + if (!*p) + return; + + strict_strtoul(*p, 10, &touchbook_revision); +} +__early_param("tbr=", early_touchbook_revision); + +static void __init omap3_touchbook_init(void) +{ + pm_power_off = omap3_touchbook_poweroff; + + omap3_touchbook_i2c_init(); + platform_add_devices(omap3_touchbook_devices, + ARRAY_SIZE(omap3_touchbook_devices)); + omap_serial_init(); + + omap_mux_init_gpio(170, OMAP_PIN_INPUT); + gpio_request(176, "DVI_nPD"); + /* REVISIT leave DVI powered down until it's needed ... */ + gpio_direction_output(176, true); + + /* Touchscreen and accelerometer */ + spi_register_board_info(omap3_ads7846_spi_board_info, + ARRAY_SIZE(omap3_ads7846_spi_board_info)); + omap3_ads7846_init(); + usb_musb_init(); + usb_ehci_init(&ehci_pdata); + omap3touchbook_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +} + +static void __init omap3_touchbook_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") + /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_touchbook_map_io, + .init_irq = omap3_touchbook_init_irq, + .init_machine = omap3_touchbook_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52dfd51a938e..d192dd98a591 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -26,7 +26,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/platform_device.h> -#include <linux/i2c/twl4030.h> +#include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <linux/mtd/mtd.h> @@ -44,9 +44,9 @@ #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> -#include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -405,9 +405,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif static void __init overo_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); @@ -418,8 +426,8 @@ static void __init overo_init(void) overo_init_smsc911x(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 15ce6514c5fd..17f3c91231db 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -33,6 +33,7 @@ #include <plat/onenand.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "mmc-twl4030.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 @@ -59,7 +60,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .bus_num = 4, .chip_select = 0, .max_speed_hz = 48000000, - .mode = SPI_MODE_2, + .mode = SPI_MODE_3, .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, @@ -401,15 +402,9 @@ static struct twl4030_usb_data rx51_usb_data = { static struct twl4030_ins sleep_on_seq[] __initdata = { /* - * Turn off VDD1 and VDD2. + * Turn off everything */ - {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4}, - {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2}, -/* - * And also turn off the OMAP3 PLLs and the sysclk output. - */ - {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3}, - {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2}, }; static struct twl4030_script sleep_on_script __initdata = { @@ -420,14 +415,9 @@ static struct twl4030_script sleep_on_script __initdata = { static struct twl4030_ins wakeup_seq[] __initdata = { /* - * Reenable the OMAP3 PLLs. - * Wakeup VDD1 and VDD2. - * Reenable sysclk output. + * Reenable everything */ - {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30}, - {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30}, - {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37}, - {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, }; static struct twl4030_script wakeup_script __initdata = { @@ -438,10 +428,9 @@ static struct twl4030_script wakeup_script __initdata = { static struct twl4030_ins wakeup_p3_seq[] __initdata = { /* - * Wakeup VDD1 (dummy to be able to insert a delay) - * Enable CLKEN + * Reenable everything */ - {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2}, }; static struct twl4030_script wakeup_p3_script __initdata = { @@ -462,12 +451,11 @@ static struct twl4030_ins wrst_seq[] __initdata = { {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), 0x13}, - {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13}, {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, - {MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, + {MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, }; @@ -489,22 +477,81 @@ static struct twl4030_script *twl4030_scripts[] __initdata = { }; static struct twl4030_resconfig twl4030_rconfig[] __initdata = { - { .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 }, - { .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 }, - { .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 }, - { .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3}, - { .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1, - .type2 = 3}, - { .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3}, - { .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3}, - { .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3}, - { .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3}, - { .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3}, - { .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3}, - { .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1, - .type2 = 3}, - { .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1, - .type2 = 1 }, + { .resource = RES_VDD1, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, + .remap_sleep = RES_STATE_OFF + }, + { .resource = RES_VDD2, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, + .remap_sleep = RES_STATE_OFF + }, + { .resource = RES_VPLL1, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF, + .remap_sleep = RES_STATE_OFF + }, + { .resource = RES_VPLL2, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VAUX1, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VAUX2, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VAUX3, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VAUX4, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VMMC1, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VMMC2, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VDAC, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VSIM, .devgroup = -1, + .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_VIO, .devgroup = DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_32KCLKOUT, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_RESET, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, + { .resource = RES_Main_Ref, .devgroup = -1, + .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 + }, { 0, 0}, }; @@ -630,9 +677,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = { static void __init board_smc91x_init(void) { - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); + omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); gpmc_smc91x_init(&board_smc91x_data); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1bb1de245917..67bb3476b707 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -23,13 +23,14 @@ #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/board.h> #include <plat/common.h> #include <plat/dma.h> #include <plat/gpmc.h> #include <plat/usb.h> +#include "mux.h" + struct omap_sdrc_params *rx51_get_sdram_timings(void); static struct omap_lcd_config rx51_lcd_config = { @@ -69,15 +70,24 @@ static void __init rx51_init_irq(void) extern void __init rx51_peripherals_init(void); +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init rx51_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index f14baa392760..258794db488f 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -152,14 +152,20 @@ static struct regulator_init_data zoom_vsim = { static struct twl4030_hsmmc_info mmc[] __initdata = { { + .name = "external", .mmc = 1, .wires = 4, .gpio_wp = -EINVAL, + .power_saving = true, }, { + .name = "internal", .mmc = 2, - .wires = 4, + .wires = 8, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .nonremovable = true, + .power_saving = true, }, {} /* Terminator */ }; @@ -167,11 +173,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(mmc); /* link regulators to MMC adapters ... we "know" the @@ -236,6 +239,7 @@ static struct twl4030_platform_data zoom_twldata = { .gpio = &zoom_gpio_data, .keypad = &zoom_kp_twl4030_data, .codec = &zoom_codec_data, + .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index d94d047c7dce..bb87cf7878ff 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -23,6 +23,7 @@ #include <mach/board-zoom.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" static void __init omap_zoom2_init_irq(void) @@ -68,8 +69,17 @@ static struct twl4030_platform_data zoom2_twldata = { #endif +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 8d965a6516c8..a9fe9181b010 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -21,6 +21,7 @@ #include <plat/common.h> #include <plat/board.h> +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" static void __init omap_zoom_map_io(void) @@ -42,8 +43,17 @@ static void __init omap_zoom_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 4716206547ac..759c72a48f7f 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -70,9 +70,41 @@ u8 cpu_mask; /*------------------------------------------------------------------------- - * OMAP2/3 specific clock functions + * OMAP2/3/4 specific clock functions *-------------------------------------------------------------------------*/ +void omap2_init_dpll_parent(struct clk *clk) +{ + u32 v; + struct dpll_data *dd; + + dd = clk->dpll_data; + if (!dd) + return; + + /* Return bypass rate if DPLL is bypassed */ + v = __raw_readl(dd->control_reg); + v &= dd->enable_mask; + v >>= __ffs(dd->enable_mask); + + /* Reparent in case the dpll is in bypass */ + if (cpu_is_omap24xx()) { + if (v == OMAP2XXX_EN_DPLL_LPBYPASS || + v == OMAP2XXX_EN_DPLL_FRBYPASS) + clk_reparent(clk, dd->clk_bypass); + } else if (cpu_is_omap34xx()) { + if (v == OMAP3XXX_EN_DPLL_LPBYPASS || + v == OMAP3XXX_EN_DPLL_FRBYPASS) + clk_reparent(clk, dd->clk_bypass); + } else if (cpu_is_omap44xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) + clk_reparent(clk, dd->clk_bypass); + } + return; +} + /** * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware * @clk: struct clk * @@ -149,6 +181,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n) * clockdomain pointer, and save it into the struct clk. Intended to be * called during clk_register(). No return value. */ +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ void omap2_init_clk_clkdm(struct clk *clk) { struct clockdomain *clkdm; @@ -166,6 +199,7 @@ void omap2_init_clk_clkdm(struct clk *clk) "clkdm %s\n", clk->name, clk->clkdm_name); } } +#endif /** * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware @@ -247,6 +281,11 @@ u32 omap2_get_dpll_rate(struct clk *clk) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return dd->clk_bypass->rate; + } else if (cpu_is_omap44xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) + return dd->clk_bypass->rate; } v = __raw_readl(dd->mult_div1_reg); @@ -437,8 +476,10 @@ void omap2_clk_disable(struct clk *clk) _omap2_clk_disable(clk); if (clk->parent) omap2_clk_disable(clk->parent); +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); +#endif } } @@ -448,8 +489,10 @@ int omap2_clk_enable(struct clk *clk) int ret = 0; if (clk->usecount++ == 0) { +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_enable(clk->clkdm, clk); +#endif if (clk->parent) { ret = omap2_clk_enable(clk->parent); @@ -468,8 +511,10 @@ int omap2_clk_enable(struct clk *clk) return ret; err: +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); +#endif clk->usecount--; return ret; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 43b6bedaafd6..93c48df3b5b1 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -1,8 +1,8 @@ /* * linux/arch/arm/mach-omap2/clock.h * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation * * Contacts: * Richard Woodruff <r-woodruff2@ti.com> @@ -36,6 +36,17 @@ #define OMAP3XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP3XXX_EN_DPLL_LOCKED 0x7 +/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */ +#define OMAP4XXX_EN_DPLL_MNBYPASS 0x4 +#define OMAP4XXX_EN_DPLL_LPBYPASS 0x5 +#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 +#define OMAP4XXX_EN_DPLL_LOCKED 0x7 + +/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ +#define DPLL_LOW_POWER_STOP 0x1 +#define DPLL_LOW_POWER_BYPASS 0x5 +#define DPLL_LOCKED 0x7 + int omap2_clk_init(void); int omap2_clk_enable(struct clk *clk); void omap2_clk_disable(struct clk *clk); @@ -44,6 +55,14 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate); int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent); int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance); long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate); +unsigned long omap3_dpll_recalc(struct clk *clk); +unsigned long omap3_clkoutx2_recalc(struct clk *clk); +void omap3_dpll_allow_idle(struct clk *clk); +void omap3_dpll_deny_idle(struct clk *clk); +u32 omap3_dpll_autoidle_read(struct clk *clk); +int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); +int omap3_noncore_dpll_enable(struct clk *clk); +void omap3_noncore_dpll_disable(struct clk *clk); #ifdef CONFIG_OMAP_RESET_CLOCKS void omap2_clk_disable_unused(struct clk *clk); @@ -63,6 +82,7 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk); long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate); int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); +void omap2_init_dpll_parent(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); int omap2_dflt_clk_enable(struct clk *clk); @@ -72,29 +92,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, u8 *idlest_bit); +extern u8 cpu_mask; + extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; -extern u8 cpu_mask; +extern struct clk_functions omap2_clk_functions; +extern struct clk *vclk, *sclk; -/* clksel_rate data common to 24xx/343x */ -static const struct clksel_rate gpt_32k_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate gpt_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate gfx_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 0 } -}; +extern const struct clksel_rate gpt_32k_rates[]; +extern const struct clksel_rate gpt_sys_rates[]; +extern const struct clksel_rate gfx_l3_rates[]; #endif diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c deleted file mode 100644 index e70e7e000eaa..000000000000 --- a/arch/arm/mach-omap2/clock24xx.c +++ /dev/null @@ -1,805 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/clock.c - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/cpufreq.h> -#include <linux/bitops.h> - -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/prcm.h> -#include <asm/div64.h> -#include <asm/clkdev.h> - -#include <plat/sdrc.h> -#include "clock.h" -#include "prm.h" -#include "prm-regbits-24xx.h" -#include "cm.h" -#include "cm-regbits-24xx.h" - -static const struct clkops clkops_oscck; -static const struct clkops clkops_fixed; - -static void omap2430_clk_i2chs_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); - -/* 2430 I2CHS has non-standard IDLEST register */ -static const struct clkops clkops_omap2430_i2chs_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap2430_clk_i2chs_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -#include "clock24xx.h" - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_243X RATE_IN_243X -#define CK_242X RATE_IN_242X - -static struct omap_clk omap24xx_clks[] = { - /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), - CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), - CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), - CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), - /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), - /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), - CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), - CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), - CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), - CLK(NULL, "emul_ck", &emul_ck, CK_242X), - /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), - /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), - CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), - CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), - CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), - CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), - CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), - /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), - /* Modem domain clocks */ - CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), - CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), - /* DSS domain clocks */ - CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X), - CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), - /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), - /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), - /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), - /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), - CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), - CLK(NULL, "icr_ick", &icr_ick, CK_243X), - CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), - CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), - CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), - CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), - CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), - CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), - CLK(NULL, "eac_ick", &eac_ick, CK_242X), - CLK(NULL, "eac_fck", &eac_fck, CK_242X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), - CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), - CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), - CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), - CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), - CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), - CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), - CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), - CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), - CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), - CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), - CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), - CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), - CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), - CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), - CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), - CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), - CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), - CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), -}; - -/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ -#define EN_APLL_STOPPED 0 -#define EN_APLL_LOCKED 3 - -/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ -#define APLLS_CLKIN_19_2MHZ 0 -#define APLLS_CLKIN_13MHZ 2 -#define APLLS_CLKIN_12MHZ 3 - -/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ - -static struct prcm_config *curr_prcm_set; -static struct clk *vclk; -static struct clk *sclk; - -static void __iomem *prcm_clksrc_ctrl; - -/*------------------------------------------------------------------------- - * Omap24xx specific clock functions - *-------------------------------------------------------------------------*/ - -/** - * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * - * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the - * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function - * passes back the correct CM_IDLEST register address for I2CHS - * modules. No return value. - */ -static void omap2430_clk_i2chs_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit) -{ - *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); - *idlest_bit = clk->enable_bit; -} - - -/** - * omap2xxx_clk_get_core_rate - return the CORE_CLK rate - * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") - * - * Returns the CORE_CLK rate. CORE_CLK can have one of three rate - * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz - * (the latter is unusual). This currently should be called with - * struct clk *dpll_ck, which is a composite clock of dpll_ck and - * core_ck. - */ -static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) -{ - long long core_clk; - u32 v; - - core_clk = omap2_get_dpll_rate(clk); - - v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - v &= OMAP24XX_CORE_CLK_SRC_MASK; - - if (v == CORE_CLK_SRC_32K) - core_clk = 32768; - else - core_clk *= v; - - return core_clk; -} - -static int omap2_enable_osc_ck(struct clk *clk) -{ - u32 pcc; - - pcc = __raw_readl(prcm_clksrc_ctrl); - - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); - - return 0; -} - -static void omap2_disable_osc_ck(struct clk *clk) -{ - u32 pcc; - - pcc = __raw_readl(prcm_clksrc_ctrl); - - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); -} - -static const struct clkops clkops_oscck = { - .enable = &omap2_enable_osc_ck, - .disable = &omap2_disable_osc_ck, -}; - -#ifdef OLD_CK -/* Recalculate SYST_CLK */ -static void omap2_sys_clk_recalc(struct clk * clk) -{ - u32 div = PRCM_CLKSRC_CTRL; - div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ - div >>= clk->rate_offset; - clk->rate = (clk->parent->rate / div); - propagate_rate(clk); -} -#endif /* OLD_CK */ - -/* Enable an APLL if off */ -static int omap2_clk_fixed_enable(struct clk *clk) -{ - u32 cval, apll_mask; - - apll_mask = EN_APLL_LOCKED << clk->enable_bit; - - cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); - - if ((cval & apll_mask) == apll_mask) - return 0; /* apll already enabled */ - - cval &= ~apll_mask; - cval |= apll_mask; - cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); - - if (clk == &apll96_ck) - cval = OMAP24XX_ST_96M_APLL; - else if (clk == &apll54_ck) - cval = OMAP24XX_ST_54M_APLL; - - omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, - clk->name); - - /* - * REVISIT: Should we return an error code if omap2_wait_clock_ready() - * fails? - */ - return 0; -} - -/* Stop APLL */ -static void omap2_clk_fixed_disable(struct clk *clk) -{ - u32 cval; - - cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); - cval &= ~(EN_APLL_LOCKED << clk->enable_bit); - cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); -} - -static const struct clkops clkops_fixed = { - .enable = &omap2_clk_fixed_enable, - .disable = &omap2_clk_fixed_disable, -}; - -/* - * Uses the current prcm set to tell if a rate is valid. - * You can go slower, but not faster within a given rate set. - */ -static long omap2_dpllcore_round_rate(unsigned long target_rate) -{ - u32 high, low, core_clk_src; - - core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; - - if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ - high = curr_prcm_set->dpll_speed * 2; - low = curr_prcm_set->dpll_speed; - } else { /* DPLL clockout x 2 */ - high = curr_prcm_set->dpll_speed; - low = curr_prcm_set->dpll_speed / 2; - } - -#ifdef DOWN_VARIABLE_DPLL - if (target_rate > high) - return high; - else - return target_rate; -#else - if (target_rate > low) - return high; - else - return low; -#endif - -} - -static unsigned long omap2_dpllcore_recalc(struct clk *clk) -{ - return omap2xxx_clk_get_core_rate(clk); -} - -static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) -{ - u32 cur_rate, low, mult, div, valid_rate, done_rate; - u32 bypass = 0; - struct prcm_config tmpset; - const struct dpll_data *dd; - - cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); - mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - mult &= OMAP24XX_CORE_CLK_SRC_MASK; - - if ((rate == (cur_rate / 2)) && (mult == 2)) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); - } else if ((rate == (cur_rate * 2)) && (mult == 1)) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - } else if (rate != cur_rate) { - valid_rate = omap2_dpllcore_round_rate(rate); - if (valid_rate != rate) - return -EINVAL; - - if (mult == 1) - low = curr_prcm_set->dpll_speed; - else - low = curr_prcm_set->dpll_speed / 2; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); - tmpset.cm_clksel1_pll &= ~(dd->mult_mask | - dd->div1_mask); - div = ((curr_prcm_set->xtal_speed / 1000000) - 1); - tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; - if (rate > low) { - tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; - mult = ((rate / 2) / 1000000); - done_rate = CORE_CLK_SRC_DPLL_X2; - } else { - tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL; - mult = (rate / 1000000); - done_rate = CORE_CLK_SRC_DPLL; - } - tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask)); - tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask)); - - /* Worst case */ - tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS; - - if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ - bypass = 1; - - /* For omap2xxx_sdrc_init_params() */ - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - - /* Force dll lock mode */ - omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, - bypass); - - /* Errata: ret dll entry state */ - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); - omap2xxx_sdrc_reprogram(done_rate, 0); - } - - return 0; -} - -/** - * omap2_table_mpu_recalc - just return the MPU speed - * @clk: virt_prcm_set struct clk - * - * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. - */ -static unsigned long omap2_table_mpu_recalc(struct clk *clk) -{ - return curr_prcm_set->mpu_speed; -} - -/* - * Look for a rate equal or less than the target rate given a configuration set. - * - * What's not entirely clear is "which" field represents the key field. - * Some might argue L3-DDR, others ARM, others IVA. This code is simple and - * just uses the ARM rates. - */ -static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) -{ - struct prcm_config *ptr; - long highest_rate; - - if (clk != &virt_prcm_set) - return -EINVAL; - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->mpu_speed; ptr++) { - if (!(ptr->flags & cpu_mask)) - continue; - if (ptr->xtal_speed != sys_ck.rate) - continue; - - highest_rate = ptr->mpu_speed; - - /* Can check only after xtal frequency check */ - if (ptr->mpu_speed <= rate) - break; - } - return highest_rate; -} - -/* Sets basic clocks based on the specified rate */ -static int omap2_select_table_rate(struct clk *clk, unsigned long rate) -{ - u32 cur_rate, done_rate, bypass = 0, tmp; - struct prcm_config *prcm; - unsigned long found_speed = 0; - unsigned long flags; - - if (clk != &virt_prcm_set) - return -EINVAL; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - - if (prcm->xtal_speed != sys_ck.rate) - continue; - - if (prcm->mpu_speed <= rate) { - found_speed = prcm->mpu_speed; - break; - } - } - - if (!found_speed) { - printk(KERN_INFO "Could not set MPU rate to %luMHz\n", - rate / 1000000); - return -EINVAL; - } - - curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); - - if (prcm->dpll_speed == cur_rate / 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); - } else if (prcm->dpll_speed == cur_rate * 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - } else if (prcm->dpll_speed != cur_rate) { - local_irq_save(flags); - - if (prcm->dpll_speed == prcm->xtal_speed) - bypass = 1; - - if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == - CORE_CLK_SRC_DPLL_X2) - done_rate = CORE_CLK_SRC_DPLL_X2; - else - done_rate = CORE_CLK_SRC_DPLL; - - /* MPU divider */ - cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); - - /* dsp + iva1 div(2420), iva2.1(2430) */ - cm_write_mod_reg(prcm->cm_clksel_dsp, - OMAP24XX_DSP_MOD, CM_CLKSEL); - - cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); - - /* Major subsystem dividers */ - tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, - CM_CLKSEL1); - - if (cpu_is_omap2430()) - cm_write_mod_reg(prcm->cm_clksel_mdm, - OMAP2430_MDM_MOD, CM_CLKSEL); - - /* x2 to enter omap2xxx_sdrc_init_params() */ - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - - omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, - bypass); - - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); - omap2xxx_sdrc_reprogram(done_rate, 0); - - local_irq_restore(flags); - } - - return 0; -} - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - */ -static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - struct prcm_config *prcm; - int i = 0; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - if (i == 0) { - printk(KERN_WARNING "%s: failed to initialize frequency " - "table\n", __func__); - return; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} -#endif - -static struct clk_functions omap2_clk_functions = { - .clk_enable = omap2_clk_enable, - .clk_disable = omap2_clk_disable, - .clk_round_rate = omap2_clk_round_rate, - .clk_set_rate = omap2_clk_set_rate, - .clk_set_parent = omap2_clk_set_parent, - .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, -#endif -}; - -static u32 omap2_get_apll_clkin(void) -{ - u32 aplls, srate = 0; - - aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); - aplls &= OMAP24XX_APLLS_CLKIN_MASK; - aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; - - if (aplls == APLLS_CLKIN_19_2MHZ) - srate = 19200000; - else if (aplls == APLLS_CLKIN_13MHZ) - srate = 13000000; - else if (aplls == APLLS_CLKIN_12MHZ) - srate = 12000000; - - return srate; -} - -static u32 omap2_get_sysclkdiv(void) -{ - u32 div; - - div = __raw_readl(prcm_clksrc_ctrl); - div &= OMAP_SYSCLKDIV_MASK; - div >>= OMAP_SYSCLKDIV_SHIFT; - - return div; -} - -static unsigned long omap2_osc_clk_recalc(struct clk *clk) -{ - return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); -} - -static unsigned long omap2_sys_clk_recalc(struct clk *clk) -{ - return clk->parent->rate / omap2_get_sysclkdiv(); -} - -/* - * Set clocks for bypass mode for reboot to work. - */ -void omap2_clk_prepare_for_reboot(void) -{ - u32 rate; - - if (vclk == NULL || sclk == NULL) - return; - - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); -} - -/* - * Switch the MPU rate if specified on cmdline. - * We cannot do this early until cmdline is parsed. - */ -static int __init omap2_clk_arch_init(void) -{ - if (!mpurate) - return -EINVAL; - - if (clk_set_rate(&virt_prcm_set, mpurate)) - printk(KERN_ERR "Could not find matching MPU rate\n"); - - recalculate_root_clocks(); - - printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - return 0; -} -arch_initcall(omap2_clk_arch_init); - -int __init omap2_clk_init(void) -{ - struct prcm_config *prcm; - struct omap_clk *c; - u32 clkrate; - - if (cpu_is_omap242x()) { - prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; - cpu_mask = RATE_IN_242X; - } else if (cpu_is_omap2430()) { - prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; - cpu_mask = RATE_IN_243X; - } - - clk_init(&omap2_clk_functions); - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_preinit(c->lk.clk); - - osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); - propagate_rate(&osc_ck); - sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); - propagate_rate(&sys_ck); - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - omap2_init_clk_clkdm(c->lk.clk); - } - - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; - - recalculate_root_clocks(); - - printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable_init_clocks(); - - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - - return 0; -} diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c new file mode 100644 index 000000000000..d0e3fb7f9298 --- /dev/null +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -0,0 +1,587 @@ +/* + * linux/arch/arm/mach-omap2/clock.c + * + * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2004-2008 Nokia Corporation + * + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley + * + * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, + * Gordon McNutt and RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/cpufreq.h> +#include <linux/bitops.h> + +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/prcm.h> +#include <plat/clkdev_omap.h> +#include <asm/div64.h> +#include <asm/clkdev.h> + +#include <plat/sdrc.h> +#include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" + + +/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ +#define EN_APLL_STOPPED 0 +#define EN_APLL_LOCKED 3 + +/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ +#define APLLS_CLKIN_19_2MHZ 0 +#define APLLS_CLKIN_13MHZ 2 +#define APLLS_CLKIN_12MHZ 3 + +/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ + +const struct prcm_config *curr_prcm_set; +const struct prcm_config *rate_table; + +struct clk *vclk, *sclk, *dclk; + +void __iomem *prcm_clksrc_ctrl; + +/*------------------------------------------------------------------------- + * Omap24xx specific clock functions + *-------------------------------------------------------------------------*/ + +/** + * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the + * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function + * passes back the correct CM_IDLEST register address for I2CHS + * modules. No return value. + */ +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); + *idlest_bit = clk->enable_bit; +} + +/* 2430 I2CHS has non-standard IDLEST register */ +const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +/** + * omap2xxx_clk_get_core_rate - return the CORE_CLK rate + * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") + * + * Returns the CORE_CLK rate. CORE_CLK can have one of three rate + * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz + * (the latter is unusual). This currently should be called with + * struct clk *dpll_ck, which is a composite clock of dpll_ck and + * core_ck. + */ +unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) +{ + long long core_clk; + u32 v; + + core_clk = omap2_get_dpll_rate(clk); + + v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + v &= OMAP24XX_CORE_CLK_SRC_MASK; + + if (v == CORE_CLK_SRC_32K) + core_clk = 32768; + else + core_clk *= v; + + return core_clk; +} + +static int omap2_enable_osc_ck(struct clk *clk) +{ + u32 pcc; + + pcc = __raw_readl(prcm_clksrc_ctrl); + + __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + + return 0; +} + +static void omap2_disable_osc_ck(struct clk *clk) +{ + u32 pcc; + + pcc = __raw_readl(prcm_clksrc_ctrl); + + __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); +} + +const struct clkops clkops_oscck = { + .enable = omap2_enable_osc_ck, + .disable = omap2_disable_osc_ck, +}; + +#ifdef OLD_CK +/* Recalculate SYST_CLK */ +static void omap2_sys_clk_recalc(struct clk *clk) +{ + u32 div = PRCM_CLKSRC_CTRL; + div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ + div >>= clk->rate_offset; + clk->rate = (clk->parent->rate / div); + propagate_rate(clk); +} +#endif /* OLD_CK */ + +/* Enable an APLL if off */ +static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) +{ + u32 cval, apll_mask; + + apll_mask = EN_APLL_LOCKED << clk->enable_bit; + + cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); + + if ((cval & apll_mask) == apll_mask) + return 0; /* apll already enabled */ + + cval &= ~apll_mask; + cval |= apll_mask; + cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); + + omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask, + clk->name); + + /* + * REVISIT: Should we return an error code if omap2_wait_clock_ready() + * fails? + */ + return 0; +} + +static int omap2_clk_apll96_enable(struct clk *clk) +{ + return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL); +} + +static int omap2_clk_apll54_enable(struct clk *clk) +{ + return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL); +} + +/* Stop APLL */ +static void omap2_clk_apll_disable(struct clk *clk) +{ + u32 cval; + + cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); + cval &= ~(EN_APLL_LOCKED << clk->enable_bit); + cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); +} + +const struct clkops clkops_apll96 = { + .enable = omap2_clk_apll96_enable, + .disable = omap2_clk_apll_disable, +}; + +const struct clkops clkops_apll54 = { + .enable = omap2_clk_apll54_enable, + .disable = omap2_clk_apll_disable, +}; + +/* + * Uses the current prcm set to tell if a rate is valid. + * You can go slower, but not faster within a given rate set. + */ +long omap2_dpllcore_round_rate(unsigned long target_rate) +{ + u32 high, low, core_clk_src; + + core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; + + if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ + high = curr_prcm_set->dpll_speed * 2; + low = curr_prcm_set->dpll_speed; + } else { /* DPLL clockout x 2 */ + high = curr_prcm_set->dpll_speed; + low = curr_prcm_set->dpll_speed / 2; + } + +#ifdef DOWN_VARIABLE_DPLL + if (target_rate > high) + return high; + else + return target_rate; +#else + if (target_rate > low) + return high; + else + return low; +#endif + +} + +unsigned long omap2_dpllcore_recalc(struct clk *clk) +{ + return omap2xxx_clk_get_core_rate(clk); +} + +int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, low, mult, div, valid_rate, done_rate; + u32 bypass = 0; + struct prcm_config tmpset; + const struct dpll_data *dd; + + cur_rate = omap2xxx_clk_get_core_rate(dclk); + mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + mult &= OMAP24XX_CORE_CLK_SRC_MASK; + + if ((rate == (cur_rate / 2)) && (mult == 2)) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); + } else if ((rate == (cur_rate * 2)) && (mult == 1)) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + } else if (rate != cur_rate) { + valid_rate = omap2_dpllcore_round_rate(rate); + if (valid_rate != rate) + return -EINVAL; + + if (mult == 1) + low = curr_prcm_set->dpll_speed; + else + low = curr_prcm_set->dpll_speed / 2; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); + tmpset.cm_clksel1_pll &= ~(dd->mult_mask | + dd->div1_mask); + div = ((curr_prcm_set->xtal_speed / 1000000) - 1); + tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; + if (rate > low) { + tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; + mult = ((rate / 2) / 1000000); + done_rate = CORE_CLK_SRC_DPLL_X2; + } else { + tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL; + mult = (rate / 1000000); + done_rate = CORE_CLK_SRC_DPLL; + } + tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask)); + tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask)); + + /* Worst case */ + tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS; + + if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ + bypass = 1; + + /* For omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + + /* Force dll lock mode */ + omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, + bypass); + + /* Errata: ret dll entry state */ + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); + } + + return 0; +} + +/** + * omap2_table_mpu_recalc - just return the MPU speed + * @clk: virt_prcm_set struct clk + * + * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. + */ +unsigned long omap2_table_mpu_recalc(struct clk *clk) +{ + return curr_prcm_set->mpu_speed; +} + +/* + * Look for a rate equal or less than the target rate given a configuration set. + * + * What's not entirely clear is "which" field represents the key field. + * Some might argue L3-DDR, others ARM, others IVA. This code is simple and + * just uses the ARM rates. + */ +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) +{ + const struct prcm_config *ptr; + long highest_rate; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->mpu_speed; ptr++) { + if (!(ptr->flags & cpu_mask)) + continue; + if (ptr->xtal_speed != sys_ck_rate) + continue; + + highest_rate = ptr->mpu_speed; + + /* Can check only after xtal frequency check */ + if (ptr->mpu_speed <= rate) + break; + } + return highest_rate; +} + +/* Sets basic clocks based on the specified rate */ +int omap2_select_table_rate(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, done_rate, bypass = 0, tmp; + const struct prcm_config *prcm; + unsigned long found_speed = 0; + unsigned long flags; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + + if (prcm->xtal_speed != sys_ck_rate) + continue; + + if (prcm->mpu_speed <= rate) { + found_speed = prcm->mpu_speed; + break; + } + } + + if (!found_speed) { + printk(KERN_INFO "Could not set MPU rate to %luMHz\n", + rate / 1000000); + return -EINVAL; + } + + curr_prcm_set = prcm; + cur_rate = omap2xxx_clk_get_core_rate(dclk); + + if (prcm->dpll_speed == cur_rate / 2) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); + } else if (prcm->dpll_speed == cur_rate * 2) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + } else if (prcm->dpll_speed != cur_rate) { + local_irq_save(flags); + + if (prcm->dpll_speed == prcm->xtal_speed) + bypass = 1; + + if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == + CORE_CLK_SRC_DPLL_X2) + done_rate = CORE_CLK_SRC_DPLL_X2; + else + done_rate = CORE_CLK_SRC_DPLL; + + /* MPU divider */ + cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); + + /* dsp + iva1 div(2420), iva2.1(2430) */ + cm_write_mod_reg(prcm->cm_clksel_dsp, + OMAP24XX_DSP_MOD, CM_CLKSEL); + + cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); + + /* Major subsystem dividers */ + tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; + cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, + CM_CLKSEL1); + + if (cpu_is_omap2430()) + cm_write_mod_reg(prcm->cm_clksel_mdm, + OMAP2430_MDM_MOD, CM_CLKSEL); + + /* x2 to enter omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + + omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, + bypass); + + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); + + local_irq_restore(flags); + } + + return 0; +} + +#ifdef CONFIG_CPU_FREQ +/* + * Walk PRCM rate table and fillout cpufreq freq_table + */ +static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; + +void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) +{ + struct prcm_config *prcm; + int i = 0; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + freq_table[i].index = i; + freq_table[i].frequency = prcm->mpu_speed / 1000; + i++; + } + + if (i == 0) { + printk(KERN_WARNING "%s: failed to initialize frequency " + "table\n", __func__); + return; + } + + freq_table[i].index = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *table = &freq_table[0]; +} +#endif + +struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +#ifdef CONFIG_CPU_FREQ + .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, +#endif +}; + +static u32 omap2_get_apll_clkin(void) +{ + u32 aplls, srate = 0; + + aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); + aplls &= OMAP24XX_APLLS_CLKIN_MASK; + aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; + + if (aplls == APLLS_CLKIN_19_2MHZ) + srate = 19200000; + else if (aplls == APLLS_CLKIN_13MHZ) + srate = 13000000; + else if (aplls == APLLS_CLKIN_12MHZ) + srate = 12000000; + + return srate; +} + +static u32 omap2_get_sysclkdiv(void) +{ + u32 div; + + div = __raw_readl(prcm_clksrc_ctrl); + div &= OMAP_SYSCLKDIV_MASK; + div >>= OMAP_SYSCLKDIV_SHIFT; + + return div; +} + +unsigned long omap2_osc_clk_recalc(struct clk *clk) +{ + return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); +} + +unsigned long omap2_sys_clk_recalc(struct clk *clk) +{ + return clk->parent->rate / omap2_get_sysclkdiv(); +} + +/* + * Set clocks for bypass mode for reboot to work. + */ +void omap2_clk_prepare_for_reboot(void) +{ + u32 rate; + + if (vclk == NULL || sclk == NULL) + return; + + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); +} + +/* + * Switch the MPU rate if specified on cmdline. + * We cannot do this early until cmdline is parsed. + */ +static int __init omap2_clk_arch_init(void) +{ + struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck; + unsigned long sys_ck_rate; + + if (!mpurate) + return -EINVAL; + + virt_prcm_set = clk_get(NULL, "virt_prcm_set"); + sys_ck = clk_get(NULL, "sys_ck"); + dpll_ck = clk_get(NULL, "dpll_ck"); + mpu_ck = clk_get(NULL, "mpu_ck"); + + if (clk_set_rate(virt_prcm_set, mpurate)) + printk(KERN_ERR "Could not find matching MPU rate\n"); + + recalculate_root_clocks(); + + sys_ck_rate = clk_get_rate(sys_ck); + + pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10, + (clk_get_rate(dpll_ck) / 1000000), + (clk_get_rate(mpu_ck) / 1000000)); + + return 0; +} +arch_initcall(omap2_clk_arch_init); + + diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h new file mode 100644 index 000000000000..e35efde4bd80 --- /dev/null +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -0,0 +1,41 @@ +/* + * OMAP2 clock function prototypes and macros + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H + +unsigned long omap2_table_mpu_recalc(struct clk *clk); +int omap2_select_table_rate(struct clk *clk, unsigned long rate); +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); +unsigned long omap2_sys_clk_recalc(struct clk *clk); +unsigned long omap2_osc_clk_recalc(struct clk *clk); +unsigned long omap2_sys_clk_recalc(struct clk *clk); +unsigned long omap2_dpllcore_recalc(struct clk *clk); +int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); +unsigned long omap2xxx_clk_get_core_rate(struct clk *clk); + +/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ +#ifdef CONFIG_ARCH_OMAP2420 +#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL +#else +#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL +#endif + +extern void __iomem *prcm_clksrc_ctrl; + +extern struct clk *dclk; + +extern const struct clkops clkops_omap2430_i2chs_wait; +extern const struct clkops clkops_oscck; +extern const struct clkops clkops_apll96; +extern const struct clkops clkops_apll54; + +#endif diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock2xxx_data.c index d19cf7a7d8db..97dc7cf7751d 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock2xxx_data.c @@ -1,8 +1,8 @@ /* - * linux/arch/arm/mach-omap2/clock24xx.h + * linux/arch/arm/mach-omap2/clock2xxx_data.c * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation * * Contacts: * Richard Woodruff <r-woodruff2@ti.com> @@ -13,600 +13,21 @@ * published by the Free Software Foundation. */ -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/clk.h> -#include "clock.h" +#include <plat/clkdev_omap.h> +#include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" #include "prm.h" #include "cm.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" -/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ -#ifdef CONFIG_ARCH_OMAP2420 -#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL -#else -#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL -#endif - -static unsigned long omap2_table_mpu_recalc(struct clk *clk); -static int omap2_select_table_rate(struct clk *clk, unsigned long rate); -static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); -static unsigned long omap2_sys_clk_recalc(struct clk *clk); -static unsigned long omap2_osc_clk_recalc(struct clk *clk); -static unsigned long omap2_sys_clk_recalc(struct clk *clk); -static unsigned long omap2_dpllcore_recalc(struct clk *clk); -static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); - -/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP - * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM - */ -struct prcm_config { - unsigned long xtal_speed; /* crystal rate */ - unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ - unsigned long mpu_speed; /* speed of MPU */ - unsigned long cm_clksel_mpu; /* mpu divider */ - unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ - unsigned long cm_clksel_gfx; /* gfx dividers */ - unsigned long cm_clksel1_core; /* major subsystem dividers */ - unsigned long cm_clksel1_pll; /* m,n */ - unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ - unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ - unsigned long base_sdrc_rfr; /* base refresh timing for a set */ - unsigned char flags; -}; - -/* - * The OMAP2 processor can be run at several discrete 'PRCM configurations'. - * These configurations are characterized by voltage and speed for clocks. - * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with - * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. - * - * 2430 differs from 2420 in that there are no more phase synchronizers used. - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs - * 2430 (iva2.1, NOdsp, mdm) - */ - -/* Core fields for cm_clksel, not ratio governed */ -#define RX_CLKSEL_DSS1 (0x10 << 8) -#define RX_CLKSEL_DSS2 (0x0 << 13) -#define RX_CLKSEL_SSI (0x5 << 20) - -/*------------------------------------------------------------------------- - * Voltage/DPLL ratios - *-------------------------------------------------------------------------*/ - -/* 2430 Ratio's, 2430-Ratio Config 1 */ -#define R1_CLKSEL_L3 (4 << 0) -#define R1_CLKSEL_L4 (2 << 5) -#define R1_CLKSEL_USB (4 << 25) -#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R1_CLKSEL_L4 | R1_CLKSEL_L3 -#define R1_CLKSEL_MPU (2 << 0) -#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU -#define R1_CLKSEL_DSP (2 << 0) -#define R1_CLKSEL_DSP_IF (2 << 5) -#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF -#define R1_CLKSEL_GFX (2 << 0) -#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX -#define R1_CLKSEL_MDM (4 << 0) -#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM - -/* 2430-Ratio Config 2 */ -#define R2_CLKSEL_L3 (6 << 0) -#define R2_CLKSEL_L4 (2 << 5) -#define R2_CLKSEL_USB (2 << 25) -#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R2_CLKSEL_L4 | R2_CLKSEL_L3 -#define R2_CLKSEL_MPU (2 << 0) -#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU -#define R2_CLKSEL_DSP (2 << 0) -#define R2_CLKSEL_DSP_IF (3 << 5) -#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF -#define R2_CLKSEL_GFX (2 << 0) -#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX -#define R2_CLKSEL_MDM (6 << 0) -#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM - -/* 2430-Ratio Bootm (BYPASS) */ -#define RB_CLKSEL_L3 (1 << 0) -#define RB_CLKSEL_L4 (1 << 5) -#define RB_CLKSEL_USB (1 << 25) -#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RB_CLKSEL_L4 | RB_CLKSEL_L3 -#define RB_CLKSEL_MPU (1 << 0) -#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU -#define RB_CLKSEL_DSP (1 << 0) -#define RB_CLKSEL_DSP_IF (1 << 5) -#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF -#define RB_CLKSEL_GFX (1 << 0) -#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX -#define RB_CLKSEL_MDM (1 << 0) -#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM - -/* 2420 Ratio Equivalents */ -#define RXX_CLKSEL_VLYNQ (0x12 << 15) -#define RXX_CLKSEL_SSI (0x8 << 20) - -/* 2420-PRCM III 532MHz core */ -#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ -#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ -#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ -#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ - RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ - RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ - RIII_CLKSEL_L3 -#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ -#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU -#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ -#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ -#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ -#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ -#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ -#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ - RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ - RIII_CLKSEL_DSP -#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ -#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX - -/* 2420-PRCM II 600MHz core */ -#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ -#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ -#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ -#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RII_CLKSEL_L4 | RII_CLKSEL_L3 -#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ -#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU -#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ -#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ -#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ -#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ -#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ - RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ - RII_CLKSEL_DSP -#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ -#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX - -/* 2420-PRCM I 660MHz core */ -#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ -#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ -#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ -#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RI_CLKSEL_L4 | RI_CLKSEL_L3 -#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ -#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU -#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ -#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ -#define RI_SYNC_DSP (1 << 7) /* Activate sync */ -#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ -#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \ - RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ - RI_CLKSEL_DSP -#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ -#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX - -/* 2420-PRCM VII (boot) */ -#define RVII_CLKSEL_L3 (1 << 0) -#define RVII_CLKSEL_L4 (1 << 5) -#define RVII_CLKSEL_DSS1 (1 << 8) -#define RVII_CLKSEL_DSS2 (0 << 13) -#define RVII_CLKSEL_VLYNQ (1 << 15) -#define RVII_CLKSEL_SSI (1 << 20) -#define RVII_CLKSEL_USB (1 << 25) - -#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ - RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ - RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 - -#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ -#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU - -#define RVII_CLKSEL_DSP (1 << 0) -#define RVII_CLKSEL_DSP_IF (1 << 5) -#define RVII_SYNC_DSP (0 << 7) -#define RVII_CLKSEL_IVA (1 << 8) -#define RVII_SYNC_IVA (0 << 13) -#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ - RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP - -#define RVII_CLKSEL_GFX (1 << 0) -#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX - -/*------------------------------------------------------------------------- - * 2430 Target modes: Along with each configuration the CPU has several - * modes which goes along with them. Modes mainly are the addition of - * describe DPLL combinations to go along with a ratio. - *-------------------------------------------------------------------------*/ - -/* Hardware governed */ -#define MX_48M_SRC (0 << 3) -#define MX_54M_SRC (0 << 5) -#define MX_APLLS_CLIKIN_12 (3 << 23) -#define MX_APLLS_CLIKIN_13 (2 << 23) -#define MX_APLLS_CLIKIN_19_2 (0 << 23) - -/* - * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed - * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz - */ -#define M5A_DPLL_MULT_12 (133 << 12) -#define M5A_DPLL_DIV_12 (5 << 8) -#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5A_DPLL_MULT_13 (61 << 12) -#define M5A_DPLL_DIV_13 (2 << 8) -#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5A_DPLL_MULT_19 (55 << 12) -#define M5A_DPLL_DIV_19 (3 << 8) -#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ -#define M5B_DPLL_MULT_12 (50 << 12) -#define M5B_DPLL_DIV_12 (2 << 8) -#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5B_DPLL_MULT_13 (200 << 12) -#define M5B_DPLL_DIV_13 (12 << 8) - -#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5B_DPLL_MULT_19 (125 << 12) -#define M5B_DPLL_DIV_19 (31 << 8) -#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* - * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz - */ -#define M4_DPLL_MULT_12 (133 << 12) -#define M4_DPLL_DIV_12 (3 << 8) -#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -#define M4_DPLL_MULT_13 (399 << 12) -#define M4_DPLL_DIV_13 (12 << 8) -#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -#define M4_DPLL_MULT_19 (145 << 12) -#define M4_DPLL_DIV_19 (6 << 8) -#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* - * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz - */ -#define M3_DPLL_MULT_12 (55 << 12) -#define M3_DPLL_DIV_12 (1 << 8) -#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M3_DPLL_MULT_13 (76 << 12) -#define M3_DPLL_DIV_13 (2 << 8) -#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M3_DPLL_MULT_19 (17 << 12) -#define M3_DPLL_DIV_19 (0 << 8) -#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* - * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz - */ -#define M2_DPLL_MULT_12 (55 << 12) -#define M2_DPLL_DIV_12 (1 << 8) -#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, - * relock time issue */ -/* Core frequency changed from 330/165 to 329/164 MHz*/ -#define M2_DPLL_MULT_13 (76 << 12) -#define M2_DPLL_DIV_13 (2 << 8) -#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -#define M2_DPLL_MULT_19 (17 << 12) -#define M2_DPLL_DIV_19 (0 << 8) -#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* boot (boot) */ -#define MB_DPLL_MULT (1 << 12) -#define MB_DPLL_DIV (0 << 8) -#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_12 - -#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_13 - -#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_19 - -/* - * 2430 - chassis (sedna) - * 165 (ratio1) same as above #2 - * 150 (ratio1) - * 133 (ratio2) same as above #4 - * 110 (ratio2) same as above #3 - * 104 (ratio2) - * boot (boot) - */ - -/* PRCM I target DPLL = 2*330MHz = 660MHz */ -#define MI_DPLL_MULT_12 (55 << 12) -#define MI_DPLL_DIV_12 (1 << 8) -#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -/* - * 2420 Equivalent - mode registers - * PRCM II , target DPLL = 2*300MHz = 600MHz - */ -#define MII_DPLL_MULT_12 (50 << 12) -#define MII_DPLL_DIV_12 (1 << 8) -#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MII_DPLL_MULT_13 (300 << 12) -#define MII_DPLL_DIV_13 (12 << 8) -#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM III target DPLL = 2*266 = 532MHz*/ -#define MIII_DPLL_MULT_12 (133 << 12) -#define MIII_DPLL_DIV_12 (5 << 8) -#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MIII_DPLL_MULT_13 (266 << 12) -#define MIII_DPLL_DIV_13 (12 << 8) -#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM VII (boot bypass) */ -#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL -#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL - -/* High and low operation value */ -#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) -#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) - -/* MPU speed defines */ -#define S12M 12000000 -#define S13M 13000000 -#define S19M 19200000 -#define S26M 26000000 -#define S100M 100000000 -#define S133M 133000000 -#define S150M 150000000 -#define S164M 164000000 -#define S165M 165000000 -#define S199M 199000000 -#define S200M 200000000 -#define S266M 266000000 -#define S300M 300000000 -#define S329M 329000000 -#define S330M 330000000 -#define S399M 399000000 -#define S400M 400000000 -#define S532M 532000000 -#define S600M 600000000 -#define S658M 658000000 -#define S660M 660000000 -#define S798M 798000000 - -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, - * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, - * CM_CLKSEL2_PLL, CM_CLKSEL_MDM - * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. - * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. - * - * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ -static struct prcm_config rate_table[] = { - /* PRCM I - FAST */ - {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, - RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, - RATE_IN_242X}, - - /* PRCM II - FAST */ - {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - FAST */ - {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM II - SLOW */ - {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - SLOW */ - {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM #4 - ratio2 (ES2.1) - FAST */ - {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - FAST */ - {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - FAST */ - {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - FAST */ - {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM #4 - ratio1 (ES2.1) - SLOW */ - {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - SLOW */ - {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - SLOW */ - {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - SLOW*/ - {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; - /*------------------------------------------------------------------------- * 24xx clock tree. * @@ -708,7 +129,7 @@ static struct clk dpll_ck = { static struct clk apll96_ck = { .name = "apll96_ck", - .ops = &clkops_fixed, + .ops = &clkops_apll96, .parent = &sys_ck, .rate = 96000000, .flags = RATE_FIXED | ENABLE_ON_INIT, @@ -719,7 +140,7 @@ static struct clk apll96_ck = { static struct clk apll54_ck = { .name = "apll54_ck", - .ops = &clkops_fixed, + .ops = &clkops_apll54, .parent = &sys_ck, .rate = 54000000, .flags = RATE_FIXED | ENABLE_ON_INIT, @@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = { .round_rate = &omap2_round_to_table_rate, }; -#endif + +/* + * clkdev integration + */ + +static struct omap_clk omap24xx_clks[] = { + /* external root sources */ + CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), + CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), + CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), + /* internal analog sources */ + CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), + CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), + CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), + /* internal prcm root sources */ + CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), + CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), + CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), + CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), + CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), + CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), + CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), + CLK(NULL, "emul_ck", &emul_ck, CK_242X), + /* mpu domain clocks */ + CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), + /* dsp domain clocks */ + CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), + CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), + CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), + CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + /* GFX domain clocks */ + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), + /* Modem domain clocks */ + CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + /* DSS domain clocks */ + CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), + /* L3 domain clocks */ + CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), + /* L4 domain clocks */ + CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), + /* virtual meta-group clock */ + CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), + /* general l4 interface ck, multi-parent functional clk */ + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), + CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), + CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), + CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), + CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), + CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), + CLK(NULL, "icr_ick", &icr_ick, CK_243X), + CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), + CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), + CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), + CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), + CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), + CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), + CLK(NULL, "eac_ick", &eac_ick, CK_242X), + CLK(NULL, "eac_fck", &eac_fck, CK_242X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), + CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), + CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), + CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), + CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), + CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), + CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), + CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), + CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), + CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), + CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), + CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), + CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), + CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), + CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), +}; + +/* + * init code + */ + +int __init omap2_clk_init(void) +{ + const struct prcm_config *prcm; + struct omap_clk *c; + u32 clkrate; + u16 cpu_clkflg; + + if (cpu_is_omap242x()) { + prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; + cpu_mask = RATE_IN_242X; + cpu_clkflg = CK_242X; + rate_table = omap2420_rate_table; + } else if (cpu_is_omap2430()) { + prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; + cpu_mask = RATE_IN_243X; + cpu_clkflg = CK_243X; + rate_table = omap2430_rate_table; + } + + clk_init(&omap2_clk_functions); + + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_preinit(c->lk.clk); + + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); + propagate_rate(&osc_ck); + sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); + propagate_rate(&sys_ck); + + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + + /* Check the MPU rate set by bootloader */ + clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + dclk = clk_get(NULL, "dpll_ck"); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 9f2feaf79865..ded32364f32b 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -30,314 +30,21 @@ #include <plat/cpu.h> #include <plat/clock.h> #include <plat/sram.h> +#include <plat/sdrc.h> #include <asm/div64.h> #include <asm/clkdev.h> #include <plat/sdrc.h> #include "clock.h" +#include "clock34xx.h" +#include "sdrc.h" #include "prm.h" #include "prm-regbits-34xx.h" #include "cm.h" #include "cm-regbits-34xx.h" -static const struct clkops clkops_noncore_dpll_ops; - -static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); -static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); -static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); - -static const struct clkops clkops_omap3430es2_ssi_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_ssi_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -static const struct clkops clkops_omap3430es2_hsotgusb_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -static const struct clkops clkops_omap3430es2_dss_usbhost_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -#include "clock34xx.h" - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_343X (1 << 0) -#define CK_3430ES1 (1 << 1) -#define CK_3430ES2 (1 << 2) - -static struct omap_clk omap34xx_clks[] = { - CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X), - CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X), - CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X), - CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2), - CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X), - CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X), - CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X), - CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X), - CLK(NULL, "sys_ck", &sys_ck, CK_343X), - CLK(NULL, "sys_altclk", &sys_altclk, CK_343X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X), - CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X), - CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X), - CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X), - CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X), - CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X), - CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X), - CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X), - CLK(NULL, "core_ck", &core_ck, CK_343X), - CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X), - CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X), - CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), - CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), - CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), - CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), - CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), - CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), - CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), - CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X), - CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X), - CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X), - CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X), - CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X), - CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X), - CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X), - CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X), - CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X), - CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X), - CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X), - CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X), - CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), - CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), - CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), - CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), - CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), - CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), - CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X), - CLK(NULL, "corex2_fck", &corex2_fck, CK_343X), - CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), - CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), - CLK(NULL, "arm_fck", &arm_fck, CK_343X), - CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), - CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), - CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), - CLK(NULL, "l3_ick", &l3_ick, CK_343X), - CLK(NULL, "l4_ick", &l4_ick, CK_343X), - CLK(NULL, "rm_ick", &rm_ick, CK_343X), - CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), - CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), - CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), - CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), - CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), - CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), - CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), - CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), - CLK(NULL, "modem_fck", &modem_fck, CK_343X), - CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), - CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), - CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), - CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), - CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), - CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), - CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X), - CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), - CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), - CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), - CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), - CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), - CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), - CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), - CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), - CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), - CLK(NULL, "pka_ick", &pka_ick, CK_343X), - CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), - CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), - CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2), - CLK(NULL, "icr_ick", &icr_ick, CK_343X), - CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), - CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), - CLK(NULL, "des2_ick", &des2_ick, CK_343X), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), - CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), - CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X), - CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X), - CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X), - CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), - CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), - CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), - CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), - CLK("omap_rng", "ick", &rng_ick, CK_343X), - CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), - CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK("omapfb", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), - CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X), - CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X), - CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapfb", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapfb", "ick", &dss_ick_3430es2, CK_3430ES2), - CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), - CLK(NULL, "cam_ick", &cam_ick, CK_343X), - CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), - CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), - CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), - CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), - CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), - CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), - CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), - CLK("omap_wdt", "fck", &wdt2_fck, CK_343X), - CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), - CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), - CLK("omap_wdt", "ick", &wdt2_ick, CK_343X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), - CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), - CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X), - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X), - CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X), - CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_343X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X), - CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X), - CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X), - CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X), - CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X), - CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X), - CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X), - CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X), - CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X), - CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X), - CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X), - CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_343X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), - CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X), - CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), - CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), - CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), - CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X), - CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X), - CLK(NULL, "sr1_fck", &sr1_fck, CK_343X), - CLK(NULL, "sr2_fck", &sr2_fck, CK_343X), - CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X), - CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X), -}; - -/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ -#define DPLL_AUTOIDLE_DISABLE 0x0 -#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 - -#define MAX_DPLL_WAIT_TRIES 1000000 - -#define MIN_SDRC_DLL_LOCK_FREQ 83000000 - #define CYCLES_PER_MHZ 1000000 -/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */ -#define SDRC_MPURATE_SCALE 8 - -/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */ -#define SDRC_MPURATE_BASE_SHIFT 9 - -/* - * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at - * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize - */ -#define SDRC_MPURATE_LOOPS 96 - /* * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks * that are sourced by DPLL5, and both of these require this clock @@ -345,6 +52,9 @@ static struct omap_clk omap34xx_clks[] = { */ #define DPLL5_FREQ_FOR_USBHOST 120000000 +/* needed by omap3_core_dpll_m2_set_rate() */ +struct clk *sdrc_ick_p, *arm_fck_p; + /** * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI * @clk: struct clk * being enabled @@ -366,6 +76,13 @@ static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; } +const struct clkops clkops_omap3430es2_ssi_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + /** * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST * @clk: struct clk * being enabled @@ -391,6 +108,13 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; } +const struct clkops clkops_omap3430es2_dss_usbhost_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + /** * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB * @clk: struct clk * being enabled @@ -412,395 +136,19 @@ static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; } -/** - * omap3_dpll_recalc - recalculate DPLL rate - * @clk: DPLL struct clk - * - * Recalculate and propagate the DPLL rate. - */ -static unsigned long omap3_dpll_recalc(struct clk *clk) -{ - return omap2_get_dpll_rate(clk); -} - -/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ -static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits) -{ - const struct dpll_data *dd; - u32 v; - - dd = clk->dpll_data; - - v = __raw_readl(dd->control_reg); - v &= ~dd->enable_mask; - v |= clken_bits << __ffs(dd->enable_mask); - __raw_writel(v, dd->control_reg); -} - -/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ -static int _omap3_wait_dpll_status(struct clk *clk, u8 state) -{ - const struct dpll_data *dd; - int i = 0; - int ret = -EINVAL; - - dd = clk->dpll_data; - - state <<= __ffs(dd->idlest_mask); - - while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) && - i < MAX_DPLL_WAIT_TRIES) { - i++; - udelay(1); - } - - if (i == MAX_DPLL_WAIT_TRIES) { - printk(KERN_ERR "clock: %s failed transition to '%s'\n", - clk->name, (state) ? "locked" : "bypassed"); - } else { - pr_debug("clock: %s transition to '%s' in %d loops\n", - clk->name, (state) ? "locked" : "bypassed", i); - - ret = 0; - } - - return ret; -} - -/* From 3430 TRM ES2 4.7.6.2 */ -static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) -{ - unsigned long fint; - u16 f = 0; - - fint = clk->dpll_data->clk_ref->rate / n; - - pr_debug("clock: fint is %lu\n", fint); - - if (fint >= 750000 && fint <= 1000000) - f = 0x3; - else if (fint > 1000000 && fint <= 1250000) - f = 0x4; - else if (fint > 1250000 && fint <= 1500000) - f = 0x5; - else if (fint > 1500000 && fint <= 1750000) - f = 0x6; - else if (fint > 1750000 && fint <= 2100000) - f = 0x7; - else if (fint > 7500000 && fint <= 10000000) - f = 0xB; - else if (fint > 10000000 && fint <= 12500000) - f = 0xC; - else if (fint > 12500000 && fint <= 15000000) - f = 0xD; - else if (fint > 15000000 && fint <= 17500000) - f = 0xE; - else if (fint > 17500000 && fint <= 21000000) - f = 0xF; - else - pr_debug("clock: unknown freqsel setting for %d\n", n); - - return f; -} - -/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ - -/* - * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report - * readiness before returning. Will save and restore the DPLL's - * autoidle state across the enable, per the CDP code. If the DPLL - * locked successfully, return 0; if the DPLL did not lock in the time - * allotted, or DPLL3 was passed in, return -EINVAL. - */ -static int _omap3_noncore_dpll_lock(struct clk *clk) -{ - u8 ai; - int r; - - if (clk == &dpll3_ck) - return -EINVAL; - - pr_debug("clock: locking DPLL %s\n", clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - omap3_dpll_deny_idle(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOCKED); - - r = _omap3_wait_dpll_status(clk, 1); - - if (ai) - omap3_dpll_allow_idle(clk); - - return r; -} - -/* - * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power bypass mode. In - * bypass mode, the DPLL's rate is set equal to its parent clock's - * rate. Waits for the DPLL to report readiness before returning. - * Will save and restore the DPLL's autoidle state across the enable, - * per the CDP code. If the DPLL entered bypass mode successfully, - * return 0; if the DPLL did not enter bypass in the time allotted, or - * DPLL3 was passed in, or the DPLL does not support low-power bypass, - * return -EINVAL. - */ -static int _omap3_noncore_dpll_bypass(struct clk *clk) -{ - int r; - u8 ai; - - if (clk == &dpll3_ck) - return -EINVAL; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) - return -EINVAL; - - pr_debug("clock: configuring DPLL %s for low-power bypass\n", - clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); - - r = _omap3_wait_dpll_status(clk, 0); - - if (ai) - omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); - - return r; -} - -/* - * _omap3_noncore_dpll_stop - instruct a DPLL to stop - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power stop. Will save and - * restore the DPLL's autoidle state across the stop, per the CDP - * code. If DPLL3 was passed in, or the DPLL does not support - * low-power stop, return -EINVAL; otherwise, return 0. - */ -static int _omap3_noncore_dpll_stop(struct clk *clk) -{ - u8 ai; - - if (clk == &dpll3_ck) - return -EINVAL; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) - return -EINVAL; - - pr_debug("clock: stopping DPLL %s\n", clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); - - if (ai) - omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); - - return 0; -} - -/** - * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. - * The choice of modes depends on the DPLL's programmed rate: if it is - * the same as the DPLL's parent clock, it will enter bypass; - * otherwise, it will enter lock. This code will wait for the DPLL to - * indicate readiness before returning, unless the DPLL takes too long - * to enter the target state. Intended to be used as the struct clk's - * enable function. If DPLL3 was passed in, or the DPLL does not - * support low-power stop, or if the DPLL took too long to enter - * bypass or lock, return -EINVAL; otherwise, return 0. - */ -static int omap3_noncore_dpll_enable(struct clk *clk) -{ - int r; - struct dpll_data *dd; - - if (clk == &dpll3_ck) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (clk->rate == dd->clk_bypass->rate) { - WARN_ON(clk->parent != dd->clk_bypass); - r = _omap3_noncore_dpll_bypass(clk); - } else { - WARN_ON(clk->parent != dd->clk_ref); - r = _omap3_noncore_dpll_lock(clk); - } - /* FIXME: this is dubious - if clk->rate has changed, what about propagating? */ - if (!r) - clk->rate = omap2_get_dpll_rate(clk); - - return r; -} - -/** - * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. - * The choice of modes depends on the DPLL's programmed rate: if it is - * the same as the DPLL's parent clock, it will enter bypass; - * otherwise, it will enter lock. This code will wait for the DPLL to - * indicate readiness before returning, unless the DPLL takes too long - * to enter the target state. Intended to be used as the struct clk's - * enable function. If DPLL3 was passed in, or the DPLL does not - * support low-power stop, or if the DPLL took too long to enter - * bypass or lock, return -EINVAL; otherwise, return 0. - */ -static void omap3_noncore_dpll_disable(struct clk *clk) -{ - if (clk == &dpll3_ck) - return; - - _omap3_noncore_dpll_stop(clk); -} - - -/* Non-CORE DPLL rate set code */ - -/* - * omap3_noncore_dpll_program - set non-core DPLL M,N values directly - * @clk: struct clk * of DPLL to set - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * @freqsel: FREQSEL value to set - * - * Program the DPLL with the supplied M, N values, and wait for the DPLL to - * lock.. Returns -EINVAL upon error, or 0 upon success. - */ -static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) -{ - struct dpll_data *dd = clk->dpll_data; - u32 v; - - /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ - _omap3_noncore_dpll_bypass(clk); - - /* Set jitter correction */ - v = __raw_readl(dd->control_reg); - v &= ~dd->freqsel_mask; - v |= freqsel << __ffs(dd->freqsel_mask); - __raw_writel(v, dd->control_reg); - - /* Set DPLL multiplier, divider */ - v = __raw_readl(dd->mult_div1_reg); - v &= ~(dd->mult_mask | dd->div1_mask); - v |= m << __ffs(dd->mult_mask); - v |= (n - 1) << __ffs(dd->div1_mask); - __raw_writel(v, dd->mult_div1_reg); - - /* We let the clock framework set the other output dividers later */ - - /* REVISIT: Set ramp-up delay? */ - - _omap3_noncore_dpll_lock(clk); - - return 0; -} - -/** - * omap3_noncore_dpll_set_rate - set non-core DPLL rate - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate - * - * Set the DPLL CLKOUT to the target rate. If the DPLL can enter - * low-power bypass, and the target rate is the bypass source clock - * rate, then configure the DPLL for bypass. Otherwise, round the - * target rate if it hasn't been done already, then program and lock - * the DPLL. Returns -EINVAL upon error, or 0 upon success. - */ -static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) -{ - struct clk *new_parent = NULL; - u16 freqsel; - struct dpll_data *dd; - int ret; - - if (!clk || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (rate == omap2_get_dpll_rate(clk)) - return 0; - - /* - * Ensure both the bypass and ref clocks are enabled prior to - * doing anything; we need the bypass clock running to reprogram - * the DPLL. - */ - omap2_clk_enable(dd->clk_bypass); - omap2_clk_enable(dd->clk_ref); - - if (dd->clk_bypass->rate == rate && - (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); - - ret = _omap3_noncore_dpll_bypass(clk); - if (!ret) - new_parent = dd->clk_bypass; - } else { - if (dd->last_rounded_rate != rate) - omap2_dpll_round_rate(clk, rate); - - if (dd->last_rounded_rate == 0) - return -EINVAL; - - freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); - if (!freqsel) - WARN_ON(1); - - pr_debug("clock: %s: set rate: locking rate to %lu.\n", - clk->name, rate); - - ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, - dd->last_rounded_n, freqsel); - if (!ret) - new_parent = dd->clk_ref; - } - if (!ret) { - /* - * Switch the parent clock in the heirarchy, and make sure - * that the new parent's usecount is correct. Note: we - * enable the new parent before disabling the old to avoid - * any unnecessary hardware disable->enable transitions. - */ - if (clk->usecount) { - omap2_clk_enable(new_parent); - omap2_clk_disable(clk->parent); - } - clk_reparent(clk, new_parent); - clk->rate = rate; - } - omap2_clk_disable(dd->clk_ref); - omap2_clk_disable(dd->clk_bypass); +const struct clkops clkops_omap3430es2_hsotgusb_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; - return 0; -} +const struct clkops clkops_noncore_dpll_ops = { + .enable = omap3_noncore_dpll_enable, + .disable = omap3_noncore_dpll_disable, +}; -static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) +int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) { /* * According to the 12-5 CDP code from TI, "Limitation 2.5" @@ -831,12 +179,12 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) * Program the DPLL M2 divider with the rounded target rate. Returns * -EINVAL upon error, or 0 upon success. */ -static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) +int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) { u32 new_div = 0; u32 unlock_dll = 0; u32 c; - unsigned long validrate, sdrcrate, mpurate; + unsigned long validrate, sdrcrate, _mpurate; struct omap_sdrc_params *sdrc_cs0; struct omap_sdrc_params *sdrc_cs1; int ret; @@ -844,14 +192,11 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (!clk || !rate) return -EINVAL; - if (clk != &dpll3_m2_ck) - return -EINVAL; - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); if (validrate != rate) return -EINVAL; - sdrcrate = sdrc_ick.rate; + sdrcrate = sdrc_ick_p->rate; if (rate > clk->rate) sdrcrate <<= ((rate / clk->rate) >> 1); else @@ -869,8 +214,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) /* * XXX This only needs to be done when the CPU frequency changes */ - mpurate = arm_fck.rate / CYCLES_PER_MHZ; - c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; + _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ; + c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; c += 1; /* for safety */ c *= SDRC_MPURATE_LOOPS; c >>= SDRC_MPURATE_SCALE; @@ -906,129 +251,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) return 0; } - -static const struct clkops clkops_noncore_dpll_ops = { - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, -}; - -/* DPLL autoidle read/set code */ - - -/** - * omap3_dpll_autoidle_read - read a DPLL's autoidle bits - * @clk: struct clk * of the DPLL to read - * - * Return the DPLL's autoidle bits, shifted down to bit 0. Returns - * -EINVAL if passed a null pointer or if the struct clk does not - * appear to refer to a DPLL. - */ -static u32 omap3_dpll_autoidle_read(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return -EINVAL; - - dd = clk->dpll_data; - - v = __raw_readl(dd->autoidle_reg); - v &= dd->autoidle_mask; - v >>= __ffs(dd->autoidle_mask); - - return v; -} - -/** - * omap3_dpll_allow_idle - enable DPLL autoidle bits - * @clk: struct clk * of the DPLL to operate on - * - * Enable DPLL automatic idle control. This automatic idle mode - * switching takes effect only when the DPLL is locked, at least on - * OMAP3430. The DPLL will enter low-power stop when its downstream - * clocks are gated. No return value. - */ -static void omap3_dpll_allow_idle(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - /* - * REVISIT: CORE DPLL can optionally enter low-power bypass - * by writing 0x5 instead of 0x1. Add some mechanism to - * optionally enter this mode. - */ - v = __raw_readl(dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); - __raw_writel(v, dd->autoidle_reg); -} - -/** - * omap3_dpll_deny_idle - prevent DPLL from automatically idling - * @clk: struct clk * of the DPLL to operate on - * - * Disable DPLL automatic idle control. No return value. - */ -static void omap3_dpll_deny_idle(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - v = __raw_readl(dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); - __raw_writel(v, dd->autoidle_reg); -} - -/* Clock control for DPLL outputs */ - -/** - * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate - * @clk: DPLL output struct clk - * - * Using parent clock DPLL data, look up DPLL state. If locked, set our - * rate to the dpll_clk * 2; otherwise, just use dpll_clk. - */ -static unsigned long omap3_clkoutx2_recalc(struct clk *clk) -{ - const struct dpll_data *dd; - unsigned long rate; - u32 v; - struct clk *pclk; - - /* Walk up the parents of clk, looking for a DPLL */ - pclk = clk->parent; - while (pclk && !pclk->dpll_data) - pclk = pclk->parent; - - /* clk does not have a DPLL as a parent? */ - WARN_ON(!pclk); - - dd = pclk->dpll_data; - - WARN_ON(!dd->enable_mask); - - v = __raw_readl(dd->control_reg) & dd->enable_mask; - v >>= __ffs(dd->enable_mask); - if (v != OMAP3XXX_EN_DPLL_LOCKED) - rate = clk->parent->rate; - else - rate = clk->parent->rate * 2; - return rate; -} - /* Common clock code */ /* @@ -1037,7 +259,7 @@ static unsigned long omap3_clkoutx2_recalc(struct clk *clk) */ #if defined(CONFIG_ARCH_OMAP3) -static struct clk_functions omap2_clk_functions = { +struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable, .clk_disable = omap2_clk_disable, .clk_round_rate = omap2_clk_round_rate, @@ -1063,7 +285,7 @@ void omap2_clk_prepare_for_reboot(void) #endif } -static void omap3_clk_lock_dpll5(void) +void omap3_clk_lock_dpll5(void) { struct clk *dpll5_clk; struct clk *dpll5_m2_clk; @@ -1093,19 +315,32 @@ static void omap3_clk_lock_dpll5(void) */ static int __init omap2_clk_arch_init(void) { + struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck; + unsigned long osc_sys_rate; + if (!mpurate) return -EINVAL; + /* XXX test these for success */ + dpll1_ck = clk_get(NULL, "dpll1_ck"); + arm_fck = clk_get(NULL, "arm_fck"); + core_ck = clk_get(NULL, "core_ck"); + osc_sys_ck = clk_get(NULL, "osc_sys_ck"); + /* REVISIT: not yet ready for 343x */ - if (clk_set_rate(&dpll1_ck, mpurate)) + if (clk_set_rate(dpll1_ck, mpurate)) printk(KERN_ERR "*** Unable to set MPU rate\n"); recalculate_root_clocks(); - printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10), - (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ; + osc_sys_rate = clk_get_rate(osc_sys_ck); + + pr_info("Switched to new clocking rate (Crystal/Core/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (osc_sys_rate / 1000000), + ((osc_sys_rate / 100000) % 10), + (clk_get_rate(core_ck) / 1000000), + (clk_get_rate(arm_fck) / 1000000)); calibrate_delay(); @@ -1113,83 +348,7 @@ static int __init omap2_clk_arch_init(void) } arch_initcall(omap2_clk_arch_init); -int __init omap2_clk_init(void) -{ - /* struct prcm_config *prcm; */ - struct omap_clk *c; - /* u32 clkrate; */ - u32 cpu_clkflg; - - if (cpu_is_omap34xx()) { - cpu_mask = RATE_IN_343X; - cpu_clkflg = CK_343X; - - /* - * Update this if there are further clock changes between ES2 - * and production parts - */ - if (omap_rev() == OMAP3430_REV_ES1_0) { - /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ - cpu_clkflg |= CK_3430ES1; - } else { - cpu_mask |= RATE_IN_3430ES2; - cpu_clkflg |= CK_3430ES2; - } - } - - clk_init(&omap2_clk_functions); - - for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - clk_preinit(c->lk.clk); - for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - omap2_init_clk_clkdm(c->lk.clk); - } - - /* REVISIT: Not yet ready for OMAP3 */ -#if 0 - /* Check the MPU rate set by bootloader */ - clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; #endif - recalculate_root_clocks(); - - printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, - (core_ck.rate / 1000000), (arm_fck.rate / 1000000)); - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable_init_clocks(); - - /* - * Lock DPLL5 and put it in autoidle. - */ - if (omap_rev() >= OMAP3430_REV_ES2_0) - omap3_clk_lock_dpll5(); - /* Avoid sleeping during omap2_clk_prepare_for_reboot() */ - /* REVISIT: not yet ready for 343x */ -#if 0 - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); -#endif - return 0; -} - -#endif diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 8fe1bcb23dd9..9a2c07eac9ad 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1,2993 +1,24 @@ /* - * OMAP3 clock framework + * OMAP3 clock function prototypes and macros * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Written by Paul Walmsley - * With many device clock fixes by Kevin Hilman and Jouni Högander - * DPLL bypass clock support added by Roman Tereshonkov - * - */ - -/* - * Virtual clocks are introduced as convenient tools. - * They are sources for other clocks and not supposed - * to be requested from drivers directly. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H - -#include <plat/control.h> - -#include "clock.h" -#include "cm.h" -#include "cm-regbits-34xx.h" -#include "prm.h" -#include "prm-regbits-34xx.h" - -#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR - -static unsigned long omap3_dpll_recalc(struct clk *clk); -static unsigned long omap3_clkoutx2_recalc(struct clk *clk); -static void omap3_dpll_allow_idle(struct clk *clk); -static void omap3_dpll_deny_idle(struct clk *clk); -static u32 omap3_dpll_autoidle_read(struct clk *clk); -static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); -static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); -static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate); - -/* Maximum DPLL multiplier, divider values for OMAP3 */ -#define OMAP3_MAX_DPLL_MULT 2048 -#define OMAP3_MAX_DPLL_DIV 128 - -/* - * DPLL1 supplies clock to the MPU. - * DPLL2 supplies clock to the IVA2. - * DPLL3 supplies CORE domain clocks. - * DPLL4 supplies peripheral clocks. - * DPLL5 supplies other peripheral clocks (USBHOST, USIM). - */ - -/* Forward declarations for DPLL bypass clocks */ -static struct clk dpll1_fck; -static struct clk dpll2_fck; - -/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ -#define DPLL_LOW_POWER_STOP 0x1 -#define DPLL_LOW_POWER_BYPASS 0x5 -#define DPLL_LOCKED 0x7 - -/* PRM CLOCKS */ - -/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ -static struct clk omap_32k_fck = { - .name = "omap_32k_fck", - .ops = &clkops_null, - .rate = 32768, - .flags = RATE_FIXED, -}; - -static struct clk secure_32k_fck = { - .name = "secure_32k_fck", - .ops = &clkops_null, - .rate = 32768, - .flags = RATE_FIXED, -}; - -/* Virtual source clocks for osc_sys_ck */ -static struct clk virt_12m_ck = { - .name = "virt_12m_ck", - .ops = &clkops_null, - .rate = 12000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_13m_ck = { - .name = "virt_13m_ck", - .ops = &clkops_null, - .rate = 13000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_16_8m_ck = { - .name = "virt_16_8m_ck", - .ops = &clkops_null, - .rate = 16800000, - .flags = RATE_FIXED, -}; - -static struct clk virt_19_2m_ck = { - .name = "virt_19_2m_ck", - .ops = &clkops_null, - .rate = 19200000, - .flags = RATE_FIXED, -}; - -static struct clk virt_26m_ck = { - .name = "virt_26m_ck", - .ops = &clkops_null, - .rate = 26000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_38_4m_ck = { - .name = "virt_38_4m_ck", - .ops = &clkops_null, - .rate = 38400000, - .flags = RATE_FIXED, -}; - -static const struct clksel_rate osc_sys_12m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_13m_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_16_8m_rates[] = { - { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_19_2m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_26m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_38_4m_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel osc_sys_clksel[] = { - { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, - { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, - { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, - { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, - { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, - { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, - { .parent = NULL }, -}; - -/* Oscillator clock */ -/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ -static struct clk osc_sys_ck = { - .name = "osc_sys_ck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_PRM_CLKSEL, - .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, - .clksel = osc_sys_clksel, - /* REVISIT: deal with autoextclkmode? */ - .flags = RATE_FIXED, - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate div2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel sys_clksel[] = { - { .parent = &osc_sys_ck, .rates = div2_rates }, - { .parent = NULL } -}; - -/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */ -/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ -static struct clk sys_ck = { - .name = "sys_ck", - .ops = &clkops_null, - .parent = &osc_sys_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, - .clksel_mask = OMAP_SYSCLKDIV_MASK, - .clksel = sys_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk sys_altclk = { - .name = "sys_altclk", - .ops = &clkops_null, -}; - -/* Optional external clock input for some McBSPs */ -static struct clk mcbsp_clks = { - .name = "mcbsp_clks", - .ops = &clkops_null, -}; - -/* PRM EXTERNAL CLOCK OUTPUT */ - -static struct clk sys_clkout1 = { - .name = "sys_clkout1", - .ops = &clkops_omap2_dflt, - .parent = &osc_sys_ck, - .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, - .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DPLLS */ - -/* CM CLOCKS */ - -static const struct clksel_rate div16_dpll_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 5, .val = 5, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 7, .val = 7, .flags = RATE_IN_343X }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 9, .val = 9, .flags = RATE_IN_343X }, - { .div = 10, .val = 10, .flags = RATE_IN_343X }, - { .div = 11, .val = 11, .flags = RATE_IN_343X }, - { .div = 12, .val = 12, .flags = RATE_IN_343X }, - { .div = 13, .val = 13, .flags = RATE_IN_343X }, - { .div = 14, .val = 14, .flags = RATE_IN_343X }, - { .div = 15, .val = 15, .flags = RATE_IN_343X }, - { .div = 16, .val = 16, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -/* DPLL1 */ -/* MPU clock source */ -/* Type: DPLL */ -static struct dpll_data dpll1_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), - .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, - .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, - .clk_bypass = &dpll1_fck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), - .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), - .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll1_ck = { - .name = "dpll1_ck", - .ops = &clkops_null, - .parent = &sys_ck, - .dpll_data = &dpll1_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed. - */ -static struct clk dpll1_x2_ck = { - .name = "dpll1_x2_ck", - .ops = &clkops_null, - .parent = &dpll1_ck, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */ -static const struct clksel div16_dpll1_x2m2_clksel[] = { - { .parent = &dpll1_x2_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* - * Does not exist in the TRM - needed to separate the M2 divider from - * bypass selection in mpu_ck - */ -static struct clk dpll1_x2m2_ck = { - .name = "dpll1_x2m2_ck", - .ops = &clkops_null, - .parent = &dpll1_x2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), - .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, - .clksel = div16_dpll1_x2m2_clksel, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* DPLL2 */ -/* IVA2 clock source */ -/* Type: DPLL */ - -static struct dpll_data dpll2_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), - .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, - .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, - .clk_bypass = &dpll2_fck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), - .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | - (1 << DPLL_LOW_POWER_BYPASS), - .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), - .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll2_ck = { - .name = "dpll2_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll2_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll2_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -static const struct clksel div16_dpll2_m2x2_clksel[] = { - { .parent = &dpll2_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* - * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT - * or CLKOUTX2. CLKOUT seems most plausible. - */ -static struct clk dpll2_m2_ck = { - .name = "dpll2_m2_ck", - .ops = &clkops_null, - .parent = &dpll2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, - OMAP3430_CM_CLKSEL2_PLL), - .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, - .clksel = div16_dpll2_m2x2_clksel, - .clkdm_name = "dpll2_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* - * DPLL3 - * Source clock for all interfaces and for some device fclks - * REVISIT: Also supports fast relock bypass - not included below - */ -static struct dpll_data dpll3_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, - .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, - .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll3_ck = { - .name = "dpll3_ck", - .ops = &clkops_null, - .parent = &sys_ck, - .dpll_data = &dpll3_dd, - .round_rate = &omap2_dpll_round_rate, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed - */ -static struct clk dpll3_x2_ck = { - .name = "dpll3_x2_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel_rate div31_dpll3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 }, - { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 }, - { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 }, - { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 }, - { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 }, - { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 }, - { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 }, - { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 }, - { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 }, - { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 }, - { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 }, - { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 }, - { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 }, - { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 }, - { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 }, - { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 }, - { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 }, - { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 }, - { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 }, - { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 }, - { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 }, - { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 }, - { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 }, - { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 }, - { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 }, - { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 }, - { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 }, - { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 }, - { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 }, - { .div = 0 }, -}; - -static const struct clksel div31_dpll3m2_clksel[] = { - { .parent = &dpll3_ck, .rates = div31_dpll3_rates }, - { .parent = NULL } -}; - -/* DPLL3 output M2 - primary control point for CORE speed */ -static struct clk dpll3_m2_ck = { - .name = "dpll3_m2_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, - .clksel = div31_dpll3m2_clksel, - .clkdm_name = "dpll3_clkdm", - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap3_core_dpll_m2_set_rate, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk core_ck = { - .name = "core_ck", - .ops = &clkops_null, - .parent = &dpll3_m2_ck, - .recalc = &followparent_recalc, -}; - -static struct clk dpll3_m2x2_ck = { - .name = "dpll3_m2x2_ck", - .ops = &clkops_null, - .parent = &dpll3_m2_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static const struct clksel div16_dpll3_clksel[] = { - { .parent = &dpll3_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* This virtual clock is the source for dpll3_m3x2_ck */ -static struct clk dpll3_m3_ck = { - .name = "dpll3_m3_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL3_MASK, - .clksel = div16_dpll3_clksel, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll3_m3x2_ck = { - .name = "dpll3_m3x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll3_m3_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static struct clk emu_core_alwon_ck = { - .name = "emu_core_alwon_ck", - .ops = &clkops_null, - .parent = &dpll3_m3x2_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &followparent_recalc, -}; - -/* DPLL4 */ -/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ -/* Type: DPLL */ -static struct dpll_data dpll4_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), - .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, - .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll4_ck = { - .name = "dpll4_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll4_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_dpll4_set_rate, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed -- - * XXX does this serve any downstream clocks? - */ -static struct clk dpll4_x2_ck = { - .name = "dpll4_x2_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel div16_dpll4_clksel[] = { - { .parent = &dpll4_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* This virtual clock is the source for dpll4_m2x2_ck */ -static struct clk dpll4_m2_ck = { - .name = "dpll4_m2_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), - .clksel_mask = OMAP3430_DIV_96M_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m2x2_ck = { - .name = "dpll4_m2x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m2_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_96M_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* - * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as - * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: - * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and - * CM_96K_(F)CLK. - */ -static struct clk omap_96m_alwon_fck = { - .name = "omap_96m_alwon_fck", - .ops = &clkops_null, - .parent = &dpll4_m2x2_ck, - .recalc = &followparent_recalc, -}; - -static struct clk cm_96m_fck = { - .name = "cm_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_alwon_fck, - .recalc = &followparent_recalc, -}; - -static const struct clksel_rate omap_96m_dpll_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_96m_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_96m_fck_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, - { .parent = &sys_ck, .rates = omap_96m_sys_rates }, - { .parent = NULL } -}; - -static struct clk omap_96m_fck = { - .name = "omap_96m_fck", - .ops = &clkops_null, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_96M_MASK, - .clksel = omap_96m_fck_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* This virtual clock is the source for dpll4_m3x2_ck */ -static struct clk dpll4_m3_ck = { - .name = "dpll4_m3_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_TV_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m3x2_ck = { - .name = "dpll4_m3x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m3_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_TV_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel_rate omap_54m_d4m3x2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_54m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_54m_clksel[] = { - { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates }, - { .parent = &sys_altclk, .rates = omap_54m_alt_rates }, - { .parent = NULL } -}; - -static struct clk omap_54m_fck = { - .name = "omap_54m_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_54M_MASK, - .clksel = omap_54m_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate omap_48m_cm96m_rates[] = { - { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_48m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_48m_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, - { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, - { .parent = NULL } -}; - -static struct clk omap_48m_fck = { - .name = "omap_48m_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_48M_MASK, - .clksel = omap_48m_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk omap_12m_fck = { - .name = "omap_12m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .fixed_div = 4, - .recalc = &omap2_fixed_divisor_recalc, -}; - -/* This virstual clock is the source for dpll4_m4x2_ck */ -static struct clk dpll4_m4_ck = { - .name = "dpll4_m4_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, - .set_rate = &omap2_clksel_set_rate, - .round_rate = &omap2_clksel_round_rate, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m4x2_ck = { - .name = "dpll4_m4x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m4_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* This virtual clock is the source for dpll4_m5x2_ck */ -static struct clk dpll4_m5_ck = { - .name = "dpll4_m5_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m5x2_ck = { - .name = "dpll4_m5x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m5_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* This virtual clock is the source for dpll4_m6x2_ck */ -static struct clk dpll4_m6_ck = { - .name = "dpll4_m6_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL4_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m6x2_ck = { - .name = "dpll4_m6x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m6_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static struct clk emu_per_alwon_ck = { - .name = "emu_per_alwon_ck", - .ops = &clkops_null, - .parent = &dpll4_m6x2_ck, - .clkdm_name = "dpll4_clkdm", - .recalc = &followparent_recalc, -}; - -/* DPLL5 */ -/* Supplies 120MHz clock, USIM source clock */ -/* Type: DPLL */ -/* 3430ES2 only */ -static struct dpll_data dpll5_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), - .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, - .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), - .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), - .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll5_ck = { - .name = "dpll5_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll5_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll5_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -static const struct clksel div16_dpll5_clksel[] = { - { .parent = &dpll5_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -static struct clk dpll5_m2_ck = { - .name = "dpll5_m2_ck", - .ops = &clkops_null, - .parent = &dpll5_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), - .clksel_mask = OMAP3430ES2_DIV_120M_MASK, - .clksel = div16_dpll5_clksel, - .clkdm_name = "dpll5_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* CM EXTERNAL CLOCK OUTPUTS */ - -static const struct clksel_rate clkout2_src_core_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_96m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_54m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel clkout2_src_clksel[] = { - { .parent = &core_ck, .rates = clkout2_src_core_rates }, - { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, - { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, - { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, - { .parent = NULL } -}; - -static struct clk clkout2_src_ck = { - .name = "clkout2_src_ck", - .ops = &clkops_omap2_dflt, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP3430_CM_CLKOUT_CTRL, - .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, - .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, - .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, - .clksel = clkout2_src_clksel, - .clkdm_name = "core_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate sys_clkout2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 1, .flags = RATE_IN_343X }, - { .div = 4, .val = 2, .flags = RATE_IN_343X }, - { .div = 8, .val = 3, .flags = RATE_IN_343X }, - { .div = 16, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel sys_clkout2_clksel[] = { - { .parent = &clkout2_src_ck, .rates = sys_clkout2_rates }, - { .parent = NULL }, -}; - -static struct clk sys_clkout2 = { - .name = "sys_clkout2", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, - .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, - .clksel = sys_clkout2_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* CM OUTPUT CLOCKS */ - -static struct clk corex2_fck = { - .name = "corex2_fck", - .ops = &clkops_null, - .parent = &dpll3_m2x2_ck, - .recalc = &followparent_recalc, -}; - -/* DPLL power domain clock controls */ - -static const struct clksel_rate div4_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel div4_core_clksel[] = { - { .parent = &core_ck, .rates = div4_rates }, - { .parent = NULL } -}; - -/* - * REVISIT: Are these in DPLL power domain or CM power domain? docs - * may be inconsistent here? - */ -static struct clk dpll1_fck = { - .name = "dpll1_fck", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), - .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, - .clksel = div4_core_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mpu_ck = { - .name = "mpu_ck", - .ops = &clkops_null, - .parent = &dpll1_x2m2_ck, - .clkdm_name = "mpu_clkdm", - .recalc = &followparent_recalc, -}; - -/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ -static const struct clksel_rate arm_fck_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 1, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel arm_fck_clksel[] = { - { .parent = &mpu_ck, .rates = arm_fck_rates }, - { .parent = NULL } -}; - -static struct clk arm_fck = { - .name = "arm_fck", - .ops = &clkops_null, - .parent = &mpu_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, - .clksel = arm_fck_clksel, - .clkdm_name = "mpu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* XXX What about neon_clkdm ? */ - -/* - * REVISIT: This clock is never specifically defined in the 3430 TRM, - * although it is referenced - so this is a guess - */ -static struct clk emu_mpu_alwon_ck = { - .name = "emu_mpu_alwon_ck", - .ops = &clkops_null, - .parent = &mpu_ck, - .recalc = &followparent_recalc, -}; - -static struct clk dpll2_fck = { - .name = "dpll2_fck", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), - .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, - .clksel = div4_core_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk iva2_ck = { - .name = "iva2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll2_m2_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, - .clkdm_name = "iva2_clkdm", - .recalc = &followparent_recalc, -}; - -/* Common interface clocks */ - -static const struct clksel div2_core_clksel[] = { - { .parent = &core_ck, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk l3_ick = { - .name = "l3_ick", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_L3_MASK, - .clksel = div2_core_clksel, - .clkdm_name = "core_l3_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel div2_l3_clksel[] = { - { .parent = &l3_ick, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk l4_ick = { - .name = "l4_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_L4_MASK, - .clksel = div2_l3_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, - -}; - -static const struct clksel div2_l4_clksel[] = { - { .parent = &l4_ick, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk rm_ick = { - .name = "rm_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_RM_MASK, - .clksel = div2_l4_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* GFX power domain */ - -/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */ - -static const struct clksel gfx_l3_clksel[] = { - { .parent = &l3_ick, .rates = gfx_l3_rates }, - { .parent = NULL } -}; - -/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ -static struct clk gfx_l3_ck = { - .name = "gfx_l3_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), - .enable_bit = OMAP_EN_GFX_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk gfx_l3_fck = { - .name = "gfx_l3_fck", - .ops = &clkops_null, - .parent = &gfx_l3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), - .clksel_mask = OMAP_CLKSEL_GFX_MASK, - .clksel = gfx_l3_clksel, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gfx_l3_ick = { - .name = "gfx_l3_ick", - .ops = &clkops_null, - .parent = &gfx_l3_ck, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gfx_cg1_ck = { - .name = "gfx_cg1_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &gfx_l3_fck, /* REVISIT: correct? */ - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES1_EN_2D_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gfx_cg2_ck = { - .name = "gfx_cg2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &gfx_l3_fck, /* REVISIT: correct? */ - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES1_EN_3D_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -/* SGX power domain - 3430ES2 only */ - -static const struct clksel_rate sgx_core_rates[] = { - { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 4, .val = 1, .flags = RATE_IN_343X }, - { .div = 6, .val = 2, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel_rate sgx_96m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel sgx_clksel[] = { - { .parent = &core_ck, .rates = sgx_core_rates }, - { .parent = &cm_96m_fck, .rates = sgx_96m_rates }, - { .parent = NULL }, -}; - -static struct clk sgx_fck = { - .name = "sgx_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, - .clksel = sgx_clksel, - .clkdm_name = "sgx_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk sgx_ick = { - .name = "sgx_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, - .clkdm_name = "sgx_clkdm", - .recalc = &followparent_recalc, -}; - -/* CORE power domain */ - -static struct clk d2d_26m_fck = { - .name = "d2d_26m_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk modem_fck = { - .name = "modem_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MODEM_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sad2d_ick = { - .name = "sad2d_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SAD2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mad2d_ick = { - .name = "mad2d_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), - .enable_bit = OMAP3430_EN_MAD2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static const struct clksel omap343x_gpt_clksel[] = { - { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, - { .parent = &sys_ck, .rates = gpt_sys_rates }, - { .parent = NULL} -}; - -static struct clk gpt10_fck = { - .name = "gpt10_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt11_fck = { - .name = "gpt11_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk cpefuse_fck = { - .name = "cpefuse_fck", - .ops = &clkops_omap2_dflt, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk ts_fck = { - .name = "ts_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_32k_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_TS_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk usbtll_fck = { - .name = "usbtll_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll5_m2_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE 96M FCLK-derived clocks */ - -static struct clk core_96m_fck = { - .name = "core_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs3_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs2_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mspro_fck = { - .name = "mspro_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs1_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c3_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c2_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c1_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* - * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck; - * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck. - */ -static const struct clksel_rate common_mcbsp_96m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel mcbsp_15_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, - { .parent = NULL } -}; - -static struct clk mcbsp5_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 5, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, - .clksel = mcbsp_15_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp1_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), - .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, - .clksel = mcbsp_15_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* CORE_48M_FCK-derived clocks */ - -static struct clk core_48m_fck = { - .name = "core_48m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi4_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi3_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi2_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi1_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk uart2_fck = { - .name = "uart2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART2_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk uart1_fck = { - .name = "uart1_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk fshostusb_fck = { - .name = "fshostusb_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE_12M_FCK based clocks */ - -static struct clk core_12m_fck = { - .name = "core_12m_fck", - .ops = &clkops_null, - .parent = &omap_12m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hdq_fck = { - .name = "hdq_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_12m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DPLL3-derived clock */ - -static const struct clksel_rate ssi_ssr_corex2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel ssi_ssr_clksel[] = { - { .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates }, - { .parent = NULL } -}; - -static struct clk ssi_ssr_fck_3430es1 = { - .name = "ssi_ssr_fck", - .ops = &clkops_omap2_dflt, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, - .clksel = ssi_ssr_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk ssi_ssr_fck_3430es2 = { - .name = "ssi_ssr_fck", - .ops = &clkops_omap3430es2_ssi_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, - .clksel = ssi_ssr_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk ssi_sst_fck_3430es1 = { - .name = "ssi_sst_fck", - .ops = &clkops_null, - .parent = &ssi_ssr_fck_3430es1, - .fixed_div = 2, - .recalc = &omap2_fixed_divisor_recalc, -}; - -static struct clk ssi_sst_fck_3430es2 = { - .name = "ssi_sst_fck", - .ops = &clkops_null, - .parent = &ssi_ssr_fck_3430es2, - .fixed_div = 2, - .recalc = &omap2_fixed_divisor_recalc, -}; - - - -/* CORE_L3_ICK based clocks */ - -/* - * XXX must add clk_enable/clk_disable for these if standard code won't - * handle it - */ -static struct clk core_l3_ick = { - .name = "core_l3_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hsotgusb_ick_3430es1 = { - .name = "hsotgusb_ick", - .ops = &clkops_omap2_dflt, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hsotgusb_ick_3430es2 = { - .name = "hsotgusb_ick", - .ops = &clkops_omap3430es2_hsotgusb_wait, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sdrc_ick = { - .name = "sdrc_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SDRC_SHIFT, - .flags = ENABLE_ON_INIT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpmc_fck = { - .name = "gpmc_fck", - .ops = &clkops_null, - .parent = &core_l3_ick, - .flags = ENABLE_ON_INIT, /* huh? */ - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -/* SECURITY_L3_ICK based clocks */ - -static struct clk security_l3_ick = { - .name = "security_l3_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .recalc = &followparent_recalc, -}; - -static struct clk pka_ick = { - .name = "pka_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_PKA_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE_L4_ICK based clocks */ - -static struct clk core_l4_ick = { - .name = "core_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbtll_ick = { - .name = "usbtll_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), - .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs3_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* Intersystem Communication Registers - chassis mode only */ -static struct clk icr_ick = { - .name = "icr_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_ICR_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk aes2_ick = { - .name = "aes2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_AES2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sha12_ick = { - .name = "sha12_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SHA12_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk des2_ick = { - .name = "des2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_DES2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs2_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs1_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mspro_ick = { - .name = "mspro_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hdq_ick = { - .name = "hdq_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi4_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi3_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi2_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi1_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c3_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c2_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c1_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart2_ick = { - .name = "uart2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_UART2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart1_ick = { - .name = "uart1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_UART1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt11_ick = { - .name = "gpt11_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt10_ick = { - .name = "gpt10_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp5_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 5, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp1_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk fac_ick = { - .name = "fac_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mailboxes_ick = { - .name = "mailboxes_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk omapctrl_ick = { - .name = "omapctrl_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, - .flags = ENABLE_ON_INIT, - .recalc = &followparent_recalc, -}; - -/* SSI_L4_ICK based clocks */ - -static struct clk ssi_l4_ick = { - .name = "ssi_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk ssi_ick_3430es1 = { - .name = "ssi_ick", - .ops = &clkops_omap2_dflt, - .parent = &ssi_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk ssi_ick_3430es2 = { - .name = "ssi_ick", - .ops = &clkops_omap3430es2_ssi_wait, - .parent = &ssi_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* REVISIT: Technically the TRM claims that this is CORE_CLK based, - * but l4_ick makes more sense to me */ - -static const struct clksel usb_l4_clksel[] = { - { .parent = &l4_ick, .rates = div2_rates }, - { .parent = NULL }, -}; - -static struct clk usb_l4_ick = { - .name = "usb_l4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l4_ick, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, - .clksel = usb_l4_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* SECURITY_L4_ICK2 based clocks */ - -static struct clk security_l4_ick2 = { - .name = "security_l4_ick2", - .ops = &clkops_null, - .parent = &l4_ick, - .recalc = &followparent_recalc, -}; - -static struct clk aes1_ick = { - .name = "aes1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_AES1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk rng_ick = { - .name = "rng_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_RNG_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk sha11_ick = { - .name = "sha11_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_SHA11_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk des1_ick = { - .name = "des1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_DES1_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DSS */ -static struct clk dss1_alwon_fck_3430es1 = { - .name = "dss1_alwon_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll4_m4x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss1_alwon_fck_3430es2 = { - .name = "dss1_alwon_fck", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &dpll4_m4x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_tv_fck = { - .name = "dss_tv_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_54m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_TV_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_96m_fck = { - .name = "dss_96m_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_96m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_TV_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss2_alwon_fck = { - .name = "dss2_alwon_fck", - .ops = &clkops_omap2_dflt, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS2_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_ick_3430es1 = { - /* Handles both L3 and L4 clocks */ - .name = "dss_ick", - .ops = &clkops_omap2_dflt, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_ick_3430es2 = { - /* Handles both L3 and L4 clocks */ - .name = "dss_ick", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -/* CAM */ - -static struct clk cam_mclk = { - .name = "cam_mclk", - .ops = &clkops_omap2_dflt, - .parent = &dpll4_m5x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk cam_ick = { - /* Handles both L3 and L4 clocks */ - .name = "cam_ick", - .ops = &clkops_omap2_dflt, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk csi2_96m_fck = { - .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_CSI2_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -/* USBHOST - 3430ES2 only */ - -static struct clk usbhost_120m_fck = { - .name = "usbhost_120m_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll5_m2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_48m_fck = { - .name = "usbhost_48m_fck", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &omap_48m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_ick = { - /* Handles both L3 and L4 clocks */ - .name = "usbhost_ick", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -/* WKUP */ - -static const struct clksel_rate usim_96m_rates[] = { - { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 8, .val = 5, .flags = RATE_IN_343X }, - { .div = 10, .val = 6, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel_rate usim_120m_rates[] = { - { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 16, .val = 9, .flags = RATE_IN_343X }, - { .div = 20, .val = 10, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel usim_clksel[] = { - { .parent = &omap_96m_fck, .rates = usim_96m_rates }, - { .parent = &dpll5_m2_ck, .rates = usim_120m_rates }, - { .parent = &sys_ck, .rates = div2_rates }, - { .parent = NULL }, -}; - -/* 3430ES2 only */ -static struct clk usim_fck = { - .name = "usim_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, - .clksel = usim_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ -static struct clk gpt1_fck = { - .name = "gpt1_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "wkup_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk wkup_32k_fck = { - .name = "wkup_32k_fck", - .ops = &clkops_null, - .parent = &omap_32k_fck, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio1_dbck = { - .name = "gpio1_dbck", - .ops = &clkops_omap2_dflt, - .parent = &wkup_32k_fck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt2_fck = { - .name = "wdt2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_32k_fck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wkup_l4_ick = { - .name = "wkup_l4_ick", - .ops = &clkops_null, - .parent = &sys_ck, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -/* 3430ES2 only */ -/* Never specifically named in the TRM, so we have to infer a likely name */ -static struct clk usim_ick = { - .name = "usim_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt2_ick = { - .name = "wdt2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt1_ick = { - .name = "wdt1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio1_ick = { - .name = "gpio1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk omap_32ksync_ick = { - .name = "omap_32ksync_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -/* XXX This clock no longer exists in 3430 TRM rev F */ -static struct clk gpt12_ick = { - .name = "gpt12_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT12_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt1_ick = { - .name = "gpt1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - - - -/* PER clock domain */ - -static struct clk per_96m_fck = { - .name = "per_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_alwon_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk per_48m_fck = { - .name = "per_48m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart3_fck = { - .name = "uart3_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_48m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_UART3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt2_fck = { - .name = "gpt2_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt3_fck = { - .name = "gpt3_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt4_fck = { - .name = "gpt4_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt5_fck = { - .name = "gpt5_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt6_fck = { - .name = "gpt6_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt7_fck = { - .name = "gpt7_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt8_fck = { - .name = "gpt8_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt9_fck = { - .name = "gpt9_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk per_32k_alwon_fck = { - .name = "per_32k_alwon_fck", - .ops = &clkops_null, - .parent = &omap_32k_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio6_dbck = { - .name = "gpio6_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio5_dbck = { - .name = "gpio5_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio4_dbck = { - .name = "gpio4_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio3_dbck = { - .name = "gpio3_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio2_dbck = { - .name = "gpio2_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt3_fck = { - .name = "wdt3_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk per_l4_ick = { - .name = "per_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio6_ick = { - .name = "gpio6_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio5_ick = { - .name = "gpio5_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio4_ick = { - .name = "gpio4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio3_ick = { - .name = "gpio3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio2_ick = { - .name = "gpio2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt3_ick = { - .name = "wdt3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart3_ick = { - .name = "uart3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_UART3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt9_ick = { - .name = "gpt9_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt8_ick = { - .name = "gpt8_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt7_ick = { - .name = "gpt7_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt6_ick = { - .name = "gpt6_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt5_ick = { - .name = "gpt5_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt4_ick = { - .name = "gpt4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt3_ick = { - .name = "gpt3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt2_ick = { - .name = "gpt2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp2_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp3_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp4_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static const struct clksel mcbsp_234_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, - { .parent = NULL } -}; - -static struct clk mcbsp2_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), - .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp3_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp4_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* EMU clocks */ - -/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */ - -static const struct clksel_rate emu_src_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_per_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_mpu_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel emu_src_clksel[] = { - { .parent = &sys_ck, .rates = emu_src_sys_rates }, - { .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates }, - { .parent = &emu_per_alwon_ck, .rates = emu_src_per_rates }, - { .parent = &emu_mpu_alwon_ck, .rates = emu_src_mpu_rates }, - { .parent = NULL }, -}; - -/* - * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only - * to switch the source of some of the EMU clocks. - * XXX Are there CLKEN bits for these EMU clks? + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation */ -static struct clk emu_src_ck = { - .name = "emu_src_ck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_MUX_CTRL_MASK, - .clksel = emu_src_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate pclk_emu_rates[] = { - { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel pclk_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = pclk_emu_rates }, - { .parent = NULL }, -}; - -static struct clk pclk_fck = { - .name = "pclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, - .clksel = pclk_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate pclkx2_emu_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel pclkx2_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = pclkx2_emu_rates }, - { .parent = NULL }, -}; - -static struct clk pclkx2_fck = { - .name = "pclkx2_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, - .clksel = pclkx2_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel atclk_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = div2_rates }, - { .parent = NULL }, -}; - -static struct clk atclk_fck = { - .name = "atclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, - .clksel = atclk_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk traceclk_src_fck = { - .name = "traceclk_src_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, - .clksel = emu_src_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate traceclk_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel traceclk_clksel[] = { - { .parent = &traceclk_src_fck, .rates = traceclk_rates }, - { .parent = NULL }, -}; - -static struct clk traceclk_fck = { - .name = "traceclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, - .clksel = traceclk_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* SR clocks */ - -/* SmartReflex fclk (VDD1) */ -static struct clk sr1_fck = { - .name = "sr1_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_SR1_SHIFT, - .recalc = &followparent_recalc, -}; - -/* SmartReflex fclk (VDD2) */ -static struct clk sr2_fck = { - .name = "sr2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_SR2_SHIFT, - .recalc = &followparent_recalc, -}; -static struct clk sr_l4_ick = { - .name = "sr_l4_ick", - .ops = &clkops_null, /* RMK: missing? */ - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H -/* SECURE_32K_FCK clocks */ +int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); +int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate); +void omap3_clk_lock_dpll5(void); -static struct clk gpt12_fck = { - .name = "gpt12_fck", - .ops = &clkops_null, - .parent = &secure_32k_fck, - .recalc = &followparent_recalc, -}; +extern struct clk *sdrc_ick_p; +extern struct clk *arm_fck_p; -static struct clk wdt1_fck = { - .name = "wdt1_fck", - .ops = &clkops_null, - .parent = &secure_32k_fck, - .recalc = &followparent_recalc, -}; +/* OMAP34xx-specific clkops */ +extern const struct clkops clkops_omap3430es2_ssi_wait; +extern const struct clkops clkops_omap3430es2_hsotgusb_wait; +extern const struct clkops clkops_omap3430es2_dss_usbhost_wait; +extern const struct clkops clkops_noncore_dpll_ops; #endif diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c new file mode 100644 index 000000000000..8bdcc9cc7f9a --- /dev/null +++ b/arch/arm/mach-omap2/clock34xx_data.c @@ -0,0 +1,3289 @@ +/* + * OMAP3 clock data + * + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation + * + * Written by Paul Walmsley + * With many device clock fixes by Kevin Hilman and Jouni Högander + * DPLL bypass clock support added by Roman Tereshonkov + * + */ + +/* + * Virtual clocks are introduced as convenient tools. + * They are sources for other clocks and not supposed + * to be requested from drivers directly. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/clk.h> + +#include <plat/control.h> +#include <plat/clkdev_omap.h> + +#include "clock.h" +#include "clock34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm.h" +#include "prm-regbits-34xx.h" + +/* + * clocks + */ + +#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR + +/* Maximum DPLL multiplier, divider values for OMAP3 */ +#define OMAP3_MAX_DPLL_MULT 2048 +#define OMAP3_MAX_DPLL_DIV 128 + +/* + * DPLL1 supplies clock to the MPU. + * DPLL2 supplies clock to the IVA2. + * DPLL3 supplies CORE domain clocks. + * DPLL4 supplies peripheral clocks. + * DPLL5 supplies other peripheral clocks (USBHOST, USIM). + */ + +/* Forward declarations for DPLL bypass clocks */ +static struct clk dpll1_fck; +static struct clk dpll2_fck; + +/* PRM CLOCKS */ + +/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ +static struct clk omap_32k_fck = { + .name = "omap_32k_fck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, +}; + +static struct clk secure_32k_fck = { + .name = "secure_32k_fck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, +}; + +/* Virtual source clocks for osc_sys_ck */ +static struct clk virt_12m_ck = { + .name = "virt_12m_ck", + .ops = &clkops_null, + .rate = 12000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_13m_ck = { + .name = "virt_13m_ck", + .ops = &clkops_null, + .rate = 13000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_16_8m_ck = { + .name = "virt_16_8m_ck", + .ops = &clkops_null, + .rate = 16800000, + .flags = RATE_FIXED, +}; + +static struct clk virt_19_2m_ck = { + .name = "virt_19_2m_ck", + .ops = &clkops_null, + .rate = 19200000, + .flags = RATE_FIXED, +}; + +static struct clk virt_26m_ck = { + .name = "virt_26m_ck", + .ops = &clkops_null, + .rate = 26000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_38_4m_ck = { + .name = "virt_38_4m_ck", + .ops = &clkops_null, + .rate = 38400000, + .flags = RATE_FIXED, +}; + +static const struct clksel_rate osc_sys_12m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_13m_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_16_8m_rates[] = { + { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_19_2m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_26m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_38_4m_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel osc_sys_clksel[] = { + { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, + { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, + { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, + { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, + { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, + { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, + { .parent = NULL }, +}; + +/* Oscillator clock */ +/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ +static struct clk osc_sys_ck = { + .name = "osc_sys_ck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_PRM_CLKSEL, + .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, + .clksel = osc_sys_clksel, + /* REVISIT: deal with autoextclkmode? */ + .flags = RATE_FIXED, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate div2_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel sys_clksel[] = { + { .parent = &osc_sys_ck, .rates = div2_rates }, + { .parent = NULL } +}; + +/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */ +/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ +static struct clk sys_ck = { + .name = "sys_ck", + .ops = &clkops_null, + .parent = &osc_sys_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, + .clksel_mask = OMAP_SYSCLKDIV_MASK, + .clksel = sys_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk sys_altclk = { + .name = "sys_altclk", + .ops = &clkops_null, +}; + +/* Optional external clock input for some McBSPs */ +static struct clk mcbsp_clks = { + .name = "mcbsp_clks", + .ops = &clkops_null, +}; + +/* PRM EXTERNAL CLOCK OUTPUT */ + +static struct clk sys_clkout1 = { + .name = "sys_clkout1", + .ops = &clkops_omap2_dflt, + .parent = &osc_sys_ck, + .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, + .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DPLLS */ + +/* CM CLOCKS */ + +static const struct clksel_rate div16_dpll_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 5, .val = 5, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 7, .val = 7, .flags = RATE_IN_343X }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 9, .val = 9, .flags = RATE_IN_343X }, + { .div = 10, .val = 10, .flags = RATE_IN_343X }, + { .div = 11, .val = 11, .flags = RATE_IN_343X }, + { .div = 12, .val = 12, .flags = RATE_IN_343X }, + { .div = 13, .val = 13, .flags = RATE_IN_343X }, + { .div = 14, .val = 14, .flags = RATE_IN_343X }, + { .div = 15, .val = 15, .flags = RATE_IN_343X }, + { .div = 16, .val = 16, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +/* DPLL1 */ +/* MPU clock source */ +/* Type: DPLL */ +static struct dpll_data dpll1_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), + .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, + .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, + .clk_bypass = &dpll1_fck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), + .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), + .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), + .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll1_ck = { + .name = "dpll1_ck", + .ops = &clkops_null, + .parent = &sys_ck, + .dpll_data = &dpll1_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed. + */ +static struct clk dpll1_x2_ck = { + .name = "dpll1_x2_ck", + .ops = &clkops_null, + .parent = &dpll1_ck, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */ +static const struct clksel div16_dpll1_x2m2_clksel[] = { + { .parent = &dpll1_x2_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* + * Does not exist in the TRM - needed to separate the M2 divider from + * bypass selection in mpu_ck + */ +static struct clk dpll1_x2m2_ck = { + .name = "dpll1_x2m2_ck", + .ops = &clkops_null, + .parent = &dpll1_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), + .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, + .clksel = div16_dpll1_x2m2_clksel, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* DPLL2 */ +/* IVA2 clock source */ +/* Type: DPLL */ + +static struct dpll_data dpll2_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), + .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, + .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, + .clk_bypass = &dpll2_fck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), + .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | + (1 << DPLL_LOW_POWER_BYPASS), + .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), + .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), + .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll2_ck = { + .name = "dpll2_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll2_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll2_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +static const struct clksel div16_dpll2_m2x2_clksel[] = { + { .parent = &dpll2_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* + * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT + * or CLKOUTX2. CLKOUT seems most plausible. + */ +static struct clk dpll2_m2_ck = { + .name = "dpll2_m2_ck", + .ops = &clkops_null, + .parent = &dpll2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, + OMAP3430_CM_CLKSEL2_PLL), + .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, + .clksel = div16_dpll2_m2x2_clksel, + .clkdm_name = "dpll2_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* + * DPLL3 + * Source clock for all interfaces and for some device fclks + * REVISIT: Also supports fast relock bypass - not included below + */ +static struct dpll_data dpll3_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, + .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, + .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), + .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll3_ck = { + .name = "dpll3_ck", + .ops = &clkops_null, + .parent = &sys_ck, + .dpll_data = &dpll3_dd, + .round_rate = &omap2_dpll_round_rate, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed + */ +static struct clk dpll3_x2_ck = { + .name = "dpll3_x2_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel_rate div31_dpll3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 }, + { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 }, + { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 }, + { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 }, + { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 }, + { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 }, + { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 }, + { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 }, + { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 }, + { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 }, + { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 }, + { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 }, + { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 }, + { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 }, + { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 }, + { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 }, + { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 }, + { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 }, + { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 }, + { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 }, + { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 }, + { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 }, + { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 }, + { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 }, + { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 }, + { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 }, + { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 }, + { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 }, + { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 }, + { .div = 0 }, +}; + +static const struct clksel div31_dpll3m2_clksel[] = { + { .parent = &dpll3_ck, .rates = div31_dpll3_rates }, + { .parent = NULL } +}; + +/* DPLL3 output M2 - primary control point for CORE speed */ +static struct clk dpll3_m2_ck = { + .name = "dpll3_m2_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, + .clksel = div31_dpll3m2_clksel, + .clkdm_name = "dpll3_clkdm", + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap3_core_dpll_m2_set_rate, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk core_ck = { + .name = "core_ck", + .ops = &clkops_null, + .parent = &dpll3_m2_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dpll3_m2x2_ck = { + .name = "dpll3_m2x2_ck", + .ops = &clkops_null, + .parent = &dpll3_m2_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static const struct clksel div16_dpll3_clksel[] = { + { .parent = &dpll3_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* This virtual clock is the source for dpll3_m3x2_ck */ +static struct clk dpll3_m3_ck = { + .name = "dpll3_m3_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_DIV_DPLL3_MASK, + .clksel = div16_dpll3_clksel, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll3_m3x2_ck = { + .name = "dpll3_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll3_m3_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static struct clk emu_core_alwon_ck = { + .name = "emu_core_alwon_ck", + .ops = &clkops_null, + .parent = &dpll3_m3x2_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &followparent_recalc, +}; + +/* DPLL4 */ +/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ +/* Type: DPLL */ +static struct dpll_data dpll4_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), + .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, + .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), + .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll4_ck = { + .name = "dpll4_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll4_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_dpll4_set_rate, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed -- + * XXX does this serve any downstream clocks? + */ +static struct clk dpll4_x2_ck = { + .name = "dpll4_x2_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel div16_dpll4_clksel[] = { + { .parent = &dpll4_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* This virtual clock is the source for dpll4_m2x2_ck */ +static struct clk dpll4_m2_ck = { + .name = "dpll4_m2_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), + .clksel_mask = OMAP3430_DIV_96M_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m2x2_ck = { + .name = "dpll4_m2x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m2_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_96M_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* + * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as + * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: + * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and + * CM_96K_(F)CLK. + */ +static struct clk omap_96m_alwon_fck = { + .name = "omap_96m_alwon_fck", + .ops = &clkops_null, + .parent = &dpll4_m2x2_ck, + .recalc = &followparent_recalc, +}; + +static struct clk cm_96m_fck = { + .name = "cm_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_alwon_fck, + .recalc = &followparent_recalc, +}; + +static const struct clksel_rate omap_96m_dpll_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_96m_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_96m_fck_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, + { .parent = &sys_ck, .rates = omap_96m_sys_rates }, + { .parent = NULL } +}; + +static struct clk omap_96m_fck = { + .name = "omap_96m_fck", + .ops = &clkops_null, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_96M_MASK, + .clksel = omap_96m_fck_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* This virtual clock is the source for dpll4_m3x2_ck */ +static struct clk dpll4_m3_ck = { + .name = "dpll4_m3_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_TV_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m3x2_ck = { + .name = "dpll4_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m3_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_TV_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel_rate omap_54m_d4m3x2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_54m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_54m_clksel[] = { + { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates }, + { .parent = &sys_altclk, .rates = omap_54m_alt_rates }, + { .parent = NULL } +}; + +static struct clk omap_54m_fck = { + .name = "omap_54m_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_54M_MASK, + .clksel = omap_54m_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate omap_48m_cm96m_rates[] = { + { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_48m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_48m_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, + { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, + { .parent = NULL } +}; + +static struct clk omap_48m_fck = { + .name = "omap_48m_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_48M_MASK, + .clksel = omap_48m_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk omap_12m_fck = { + .name = "omap_12m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .fixed_div = 4, + .recalc = &omap2_fixed_divisor_recalc, +}; + +/* This virstual clock is the source for dpll4_m4x2_ck */ +static struct clk dpll4_m4_ck = { + .name = "dpll4_m4_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, + .set_rate = &omap2_clksel_set_rate, + .round_rate = &omap2_clksel_round_rate, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m4x2_ck = { + .name = "dpll4_m4x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m4_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* This virtual clock is the source for dpll4_m5x2_ck */ +static struct clk dpll4_m5_ck = { + .name = "dpll4_m5_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m5x2_ck = { + .name = "dpll4_m5x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m5_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* This virtual clock is the source for dpll4_m6x2_ck */ +static struct clk dpll4_m6_ck = { + .name = "dpll4_m6_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_DIV_DPLL4_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m6x2_ck = { + .name = "dpll4_m6x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m6_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static struct clk emu_per_alwon_ck = { + .name = "emu_per_alwon_ck", + .ops = &clkops_null, + .parent = &dpll4_m6x2_ck, + .clkdm_name = "dpll4_clkdm", + .recalc = &followparent_recalc, +}; + +/* DPLL5 */ +/* Supplies 120MHz clock, USIM source clock */ +/* Type: DPLL */ +/* 3430ES2 only */ +static struct dpll_data dpll5_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), + .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, + .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), + .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), + .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), + .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll5_ck = { + .name = "dpll5_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll5_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll5_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +static const struct clksel div16_dpll5_clksel[] = { + { .parent = &dpll5_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +static struct clk dpll5_m2_ck = { + .name = "dpll5_m2_ck", + .ops = &clkops_null, + .parent = &dpll5_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), + .clksel_mask = OMAP3430ES2_DIV_120M_MASK, + .clksel = div16_dpll5_clksel, + .clkdm_name = "dpll5_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* CM EXTERNAL CLOCK OUTPUTS */ + +static const struct clksel_rate clkout2_src_core_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_96m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_54m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel clkout2_src_clksel[] = { + { .parent = &core_ck, .rates = clkout2_src_core_rates }, + { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, + { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, + { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, + { .parent = NULL } +}; + +static struct clk clkout2_src_ck = { + .name = "clkout2_src_ck", + .ops = &clkops_omap2_dflt, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP3430_CM_CLKOUT_CTRL, + .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, + .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, + .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, + .clksel = clkout2_src_clksel, + .clkdm_name = "core_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate sys_clkout2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 4, .val = 2, .flags = RATE_IN_343X }, + { .div = 8, .val = 3, .flags = RATE_IN_343X }, + { .div = 16, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel sys_clkout2_clksel[] = { + { .parent = &clkout2_src_ck, .rates = sys_clkout2_rates }, + { .parent = NULL }, +}; + +static struct clk sys_clkout2 = { + .name = "sys_clkout2", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, + .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, + .clksel = sys_clkout2_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* CM OUTPUT CLOCKS */ + +static struct clk corex2_fck = { + .name = "corex2_fck", + .ops = &clkops_null, + .parent = &dpll3_m2x2_ck, + .recalc = &followparent_recalc, +}; + +/* DPLL power domain clock controls */ + +static const struct clksel_rate div4_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel div4_core_clksel[] = { + { .parent = &core_ck, .rates = div4_rates }, + { .parent = NULL } +}; + +/* + * REVISIT: Are these in DPLL power domain or CM power domain? docs + * may be inconsistent here? + */ +static struct clk dpll1_fck = { + .name = "dpll1_fck", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), + .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, + .clksel = div4_core_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mpu_ck = { + .name = "mpu_ck", + .ops = &clkops_null, + .parent = &dpll1_x2m2_ck, + .clkdm_name = "mpu_clkdm", + .recalc = &followparent_recalc, +}; + +/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ +static const struct clksel_rate arm_fck_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel arm_fck_clksel[] = { + { .parent = &mpu_ck, .rates = arm_fck_rates }, + { .parent = NULL } +}; + +static struct clk arm_fck = { + .name = "arm_fck", + .ops = &clkops_null, + .parent = &mpu_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), + .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, + .clksel = arm_fck_clksel, + .clkdm_name = "mpu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* XXX What about neon_clkdm ? */ + +/* + * REVISIT: This clock is never specifically defined in the 3430 TRM, + * although it is referenced - so this is a guess + */ +static struct clk emu_mpu_alwon_ck = { + .name = "emu_mpu_alwon_ck", + .ops = &clkops_null, + .parent = &mpu_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dpll2_fck = { + .name = "dpll2_fck", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), + .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, + .clksel = div4_core_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva2_ck = { + .name = "iva2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll2_m2_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .clkdm_name = "iva2_clkdm", + .recalc = &followparent_recalc, +}; + +/* Common interface clocks */ + +static const struct clksel div2_core_clksel[] = { + { .parent = &core_ck, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk l3_ick = { + .name = "l3_ick", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_L3_MASK, + .clksel = div2_core_clksel, + .clkdm_name = "core_l3_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel div2_l3_clksel[] = { + { .parent = &l3_ick, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk l4_ick = { + .name = "l4_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_L4_MASK, + .clksel = div2_l3_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, + +}; + +static const struct clksel div2_l4_clksel[] = { + { .parent = &l4_ick, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk rm_ick = { + .name = "rm_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_RM_MASK, + .clksel = div2_l4_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* GFX power domain */ + +/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */ + +static const struct clksel gfx_l3_clksel[] = { + { .parent = &l3_ick, .rates = gfx_l3_rates }, + { .parent = NULL } +}; + +/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ +static struct clk gfx_l3_ck = { + .name = "gfx_l3_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), + .enable_bit = OMAP_EN_GFX_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gfx_l3_fck = { + .name = "gfx_l3_fck", + .ops = &clkops_null, + .parent = &gfx_l3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), + .clksel_mask = OMAP_CLKSEL_GFX_MASK, + .clksel = gfx_l3_clksel, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_l3_ick = { + .name = "gfx_l3_ick", + .ops = &clkops_null, + .parent = &gfx_l3_ck, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gfx_cg1_ck = { + .name = "gfx_cg1_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES1_EN_2D_SHIFT, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gfx_cg2_ck = { + .name = "gfx_cg2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES1_EN_3D_SHIFT, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +/* SGX power domain - 3430ES2 only */ + +static const struct clksel_rate sgx_core_rates[] = { + { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 4, .val = 1, .flags = RATE_IN_343X }, + { .div = 6, .val = 2, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel_rate sgx_96m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel sgx_clksel[] = { + { .parent = &core_ck, .rates = sgx_core_rates }, + { .parent = &cm_96m_fck, .rates = sgx_96m_rates }, + { .parent = NULL }, +}; + +static struct clk sgx_fck = { + .name = "sgx_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, + .clksel = sgx_clksel, + .clkdm_name = "sgx_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk sgx_ick = { + .name = "sgx_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, + .clkdm_name = "sgx_clkdm", + .recalc = &followparent_recalc, +}; + +/* CORE power domain */ + +static struct clk d2d_26m_fck = { + .name = "d2d_26m_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk modem_fck = { + .name = "modem_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MODEM_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sad2d_ick = { + .name = "sad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mad2d_ick = { + .name = "mad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430_EN_MAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static const struct clksel omap343x_gpt_clksel[] = { + { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, + { .parent = &sys_ck, .rates = gpt_sys_rates }, + { .parent = NULL} +}; + +static struct clk gpt10_fck = { + .name = "gpt10_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_GPT10_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt11_fck = { + .name = "gpt11_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_GPT11_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk cpefuse_fck = { + .name = "cpefuse_fck", + .ops = &clkops_omap2_dflt, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk ts_fck = { + .name = "ts_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_32k_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_TS_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk usbtll_fck = { + .name = "usbtll_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll5_m2_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE 96M FCLK-derived clocks */ + +static struct clk core_96m_fck = { + .name = "core_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs3_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MMC2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mspro_fck = { + .name = "mspro_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MSPRO_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MMC1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* + * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck; + * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck. + */ +static const struct clksel_rate common_mcbsp_96m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel mcbsp_15_clksel[] = { + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + +static struct clk mcbsp5_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 5, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, + .clksel = mcbsp_15_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp1_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, + .clksel = mcbsp_15_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* CORE_48M_FCK-derived clocks */ + +static struct clk core_48m_fck = { + .name = "core_48m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_fck = { + .name = "uart2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_fck = { + .name = "uart1_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk fshostusb_fck = { + .name = "fshostusb_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE_12M_FCK based clocks */ + +static struct clk core_12m_fck = { + .name = "core_12m_fck", + .ops = &clkops_null, + .parent = &omap_12m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hdq_fck = { + .name = "hdq_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_12m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_HDQ_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DPLL3-derived clock */ + +static const struct clksel_rate ssi_ssr_corex2_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel ssi_ssr_clksel[] = { + { .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates }, + { .parent = NULL } +}; + +static struct clk ssi_ssr_fck_3430es1 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap2_dflt, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_ssr_fck_3430es2 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap3430es2_ssi_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck_3430es1 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es1, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +static struct clk ssi_sst_fck_3430es2 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es2, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + + + +/* CORE_L3_ICK based clocks */ + +/* + * XXX must add clk_enable/clk_disable for these if standard code won't + * handle it + */ +static struct clk core_l3_ick = { + .name = "core_l3_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es1 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap2_dflt, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es2 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap3430es2_hsotgusb_wait, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sdrc_ick = { + .name = "sdrc_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SDRC_SHIFT, + .flags = ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpmc_fck = { + .name = "gpmc_fck", + .ops = &clkops_null, + .parent = &core_l3_ick, + .flags = ENABLE_ON_INIT, /* huh? */ + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +/* SECURITY_L3_ICK based clocks */ + +static struct clk security_l3_ick = { + .name = "security_l3_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .recalc = &followparent_recalc, +}; + +static struct clk pka_ick = { + .name = "pka_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_PKA_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE_L4_ICK based clocks */ + +static struct clk core_l4_ick = { + .name = "core_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbtll_ick = { + .name = "usbtll_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs3_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* Intersystem Communication Registers - chassis mode only */ +static struct clk icr_ick = { + .name = "icr_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_ICR_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk aes2_ick = { + .name = "aes2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_AES2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sha12_ick = { + .name = "sha12_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SHA12_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk des2_ick = { + .name = "des2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_DES2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MMC2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MMC1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mspro_ick = { + .name = "mspro_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MSPRO_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hdq_ick = { + .name = "hdq_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HDQ_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart2_ick = { + .name = "uart2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_UART2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart1_ick = { + .name = "uart1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_UART1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt11_ick = { + .name = "gpt11_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_GPT11_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt10_ick = { + .name = "gpt10_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_GPT10_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp5_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 5, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp1_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk fac_ick = { + .name = "fac_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mailboxes_ick = { + .name = "mailboxes_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk omapctrl_ick = { + .name = "omapctrl_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, + .flags = ENABLE_ON_INIT, + .recalc = &followparent_recalc, +}; + +/* SSI_L4_ICK based clocks */ + +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk ssi_ick_3430es1 = { + .name = "ssi_ick", + .ops = &clkops_omap2_dflt, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk ssi_ick_3430es2 = { + .name = "ssi_ick", + .ops = &clkops_omap3430es2_ssi_wait, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* REVISIT: Technically the TRM claims that this is CORE_CLK based, + * but l4_ick makes more sense to me */ + +static const struct clksel usb_l4_clksel[] = { + { .parent = &l4_ick, .rates = div2_rates }, + { .parent = NULL }, +}; + +static struct clk usb_l4_ick = { + .name = "usb_l4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l4_ick, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, + .clksel = usb_l4_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* SECURITY_L4_ICK2 based clocks */ + +static struct clk security_l4_ick2 = { + .name = "security_l4_ick2", + .ops = &clkops_null, + .parent = &l4_ick, + .recalc = &followparent_recalc, +}; + +static struct clk aes1_ick = { + .name = "aes1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_AES1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk rng_ick = { + .name = "rng_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_RNG_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk sha11_ick = { + .name = "sha11_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_SHA11_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk des1_ick = { + .name = "des1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_DES1_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DSS */ +static struct clk dss1_alwon_fck_3430es1 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss1_alwon_fck_3430es2 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_tv_fck = { + .name = "dss_tv_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_54m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_TV_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_96m_fck = { + .name = "dss_96m_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_96m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_TV_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss2_alwon_fck = { + .name = "dss2_alwon_fck", + .ops = &clkops_omap2_dflt, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS2_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_ick_3430es1 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap2_dflt, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_ick_3430es2 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +/* CAM */ + +static struct clk cam_mclk = { + .name = "cam_mclk", + .ops = &clkops_omap2_dflt, + .parent = &dpll4_m5x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk cam_ick = { + /* Handles both L3 and L4 clocks */ + .name = "cam_ick", + .ops = &clkops_omap2_dflt, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk csi2_96m_fck = { + .name = "csi2_96m_fck", + .ops = &clkops_omap2_dflt, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CSI2_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +/* USBHOST - 3430ES2 only */ + +static struct clk usbhost_120m_fck = { + .name = "usbhost_120m_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll5_m2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_48m_fck = { + .name = "usbhost_48m_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &omap_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_ick = { + /* Handles both L3 and L4 clocks */ + .name = "usbhost_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +/* WKUP */ + +static const struct clksel_rate usim_96m_rates[] = { + { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 8, .val = 5, .flags = RATE_IN_343X }, + { .div = 10, .val = 6, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel_rate usim_120m_rates[] = { + { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 16, .val = 9, .flags = RATE_IN_343X }, + { .div = 20, .val = 10, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel usim_clksel[] = { + { .parent = &omap_96m_fck, .rates = usim_96m_rates }, + { .parent = &dpll5_m2_ck, .rates = usim_120m_rates }, + { .parent = &sys_ck, .rates = div2_rates }, + { .parent = NULL }, +}; + +/* 3430ES2 only */ +static struct clk usim_fck = { + .name = "usim_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, + .clksel = usim_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ +static struct clk gpt1_fck = { + .name = "gpt1_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT1_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "wkup_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk wkup_32k_fck = { + .name = "wkup_32k_fck", + .ops = &clkops_null, + .parent = &omap_32k_fck, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_dbck = { + .name = "gpio1_dbck", + .ops = &clkops_omap2_dflt, + .parent = &wkup_32k_fck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_fck = { + .name = "wdt2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_32k_fck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_WDT2_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wkup_l4_ick = { + .name = "wkup_l4_ick", + .ops = &clkops_null, + .parent = &sys_ck, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +/* 3430ES2 only */ +/* Never specifically named in the TRM, so we have to infer a likely name */ +static struct clk usim_ick = { + .name = "usim_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_ick = { + .name = "wdt2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT2_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt1_ick = { + .name = "wdt1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_ick = { + .name = "gpio1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk omap_32ksync_ick = { + .name = "omap_32ksync_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +/* XXX This clock no longer exists in 3430 TRM rev F */ +static struct clk gpt12_ick = { + .name = "gpt12_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT12_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt1_ick = { + .name = "gpt1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + + + +/* PER clock domain */ + +static struct clk per_96m_fck = { + .name = "per_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_alwon_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk per_48m_fck = { + .name = "per_48m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart3_fck = { + .name = "uart3_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_UART3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_fck = { + .name = "gpt2_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT2_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt3_fck = { + .name = "gpt3_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT3_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt4_fck = { + .name = "gpt4_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT4_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt5_fck = { + .name = "gpt5_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT5_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt6_fck = { + .name = "gpt6_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT6_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt7_fck = { + .name = "gpt7_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT7_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt8_fck = { + .name = "gpt8_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT8_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt9_fck = { + .name = "gpt9_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT9_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk per_32k_alwon_fck = { + .name = "per_32k_alwon_fck", + .ops = &clkops_null, + .parent = &omap_32k_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_dbck = { + .name = "gpio6_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_dbck = { + .name = "gpio5_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_dbck = { + .name = "gpio4_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_dbck = { + .name = "gpio3_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_dbck = { + .name = "gpio2_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_fck = { + .name = "wdt3_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_WDT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk per_l4_ick = { + .name = "per_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_ick = { + .name = "gpio6_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_ick = { + .name = "gpio5_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_ick = { + .name = "gpio4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_ick = { + .name = "gpio3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_ick = { + .name = "gpio2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_ick = { + .name = "wdt3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart3_ick = { + .name = "uart3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_UART3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt9_ick = { + .name = "gpt9_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT9_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt8_ick = { + .name = "gpt8_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT8_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt7_ick = { + .name = "gpt7_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT7_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt6_ick = { + .name = "gpt6_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt5_ick = { + .name = "gpt5_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt4_ick = { + .name = "gpt4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt3_ick = { + .name = "gpt3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_ick = { + .name = "gpt2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp2_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp3_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp4_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static const struct clksel mcbsp_234_clksel[] = { + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + +static struct clk mcbsp2_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp3_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp4_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* EMU clocks */ + +/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */ + +static const struct clksel_rate emu_src_sys_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_per_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_mpu_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel emu_src_clksel[] = { + { .parent = &sys_ck, .rates = emu_src_sys_rates }, + { .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates }, + { .parent = &emu_per_alwon_ck, .rates = emu_src_per_rates }, + { .parent = &emu_mpu_alwon_ck, .rates = emu_src_mpu_rates }, + { .parent = NULL }, +}; + +/* + * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only + * to switch the source of some of the EMU clocks. + * XXX Are there CLKEN bits for these EMU clks? + */ +static struct clk emu_src_ck = { + .name = "emu_src_ck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_MUX_CTRL_MASK, + .clksel = emu_src_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate pclk_emu_rates[] = { + { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel pclk_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = pclk_emu_rates }, + { .parent = NULL }, +}; + +static struct clk pclk_fck = { + .name = "pclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, + .clksel = pclk_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate pclkx2_emu_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel pclkx2_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = pclkx2_emu_rates }, + { .parent = NULL }, +}; + +static struct clk pclkx2_fck = { + .name = "pclkx2_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, + .clksel = pclkx2_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel atclk_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = div2_rates }, + { .parent = NULL }, +}; + +static struct clk atclk_fck = { + .name = "atclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, + .clksel = atclk_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk traceclk_src_fck = { + .name = "traceclk_src_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, + .clksel = emu_src_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate traceclk_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel traceclk_clksel[] = { + { .parent = &traceclk_src_fck, .rates = traceclk_rates }, + { .parent = NULL }, +}; + +static struct clk traceclk_fck = { + .name = "traceclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, + .clksel = traceclk_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* SR clocks */ + +/* SmartReflex fclk (VDD1) */ +static struct clk sr1_fck = { + .name = "sr1_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_SR1_SHIFT, + .recalc = &followparent_recalc, +}; + +/* SmartReflex fclk (VDD2) */ +static struct clk sr2_fck = { + .name = "sr2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_SR2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk sr_l4_ick = { + .name = "sr_l4_ick", + .ops = &clkops_null, /* RMK: missing? */ + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* SECURE_32K_FCK clocks */ + +static struct clk gpt12_fck = { + .name = "gpt12_fck", + .ops = &clkops_null, + .parent = &secure_32k_fck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt1_fck = { + .name = "wdt1_fck", + .ops = &clkops_null, + .parent = &secure_32k_fck, + .recalc = &followparent_recalc, +}; + + +/* + * clkdev + */ + +static struct omap_clk omap34xx_clks[] = { + CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X), + CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X), + CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X), + CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2), + CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X), + CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X), + CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X), + CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X), + CLK(NULL, "sys_ck", &sys_ck, CK_343X), + CLK(NULL, "sys_altclk", &sys_altclk, CK_343X), + CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X), + CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X), + CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X), + CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X), + CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X), + CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X), + CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X), + CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X), + CLK(NULL, "core_ck", &core_ck, CK_343X), + CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X), + CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X), + CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), + CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), + CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), + CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), + CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), + CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), + CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), + CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X), + CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X), + CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X), + CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X), + CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X), + CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X), + CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X), + CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X), + CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X), + CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X), + CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X), + CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X), + CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), + CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), + CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), + CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), + CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), + CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), + CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X), + CLK(NULL, "corex2_fck", &corex2_fck, CK_343X), + CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), + CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), + CLK(NULL, "arm_fck", &arm_fck, CK_343X), + CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), + CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), + CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), + CLK(NULL, "l3_ick", &l3_ick, CK_343X), + CLK(NULL, "l4_ick", &l4_ick, CK_343X), + CLK(NULL, "rm_ick", &rm_ick, CK_343X), + CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), + CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), + CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), + CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), + CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), + CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), + CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), + CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "modem_fck", &modem_fck, CK_343X), + CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), + CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), + CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), + CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), + CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), + CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), + CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X), + CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), + CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), + CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), + CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), + CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), + CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), + CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), + CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), + CLK(NULL, "pka_ick", &pka_ick, CK_343X), + CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), + CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), + CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2), + CLK(NULL, "icr_ick", &icr_ick, CK_343X), + CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), + CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), + CLK(NULL, "des2_ick", &des2_ick, CK_343X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), + CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), + CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X), + CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), + CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), + CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), + CLK("omap_rng", "ick", &rng_ick, CK_343X), + CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), + CLK(NULL, "des1_ick", &des1_ick, CK_343X), + CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), + CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2), + CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), + CLK(NULL, "cam_ick", &cam_ick, CK_343X), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), + CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), + CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), + CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), + CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), + CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), + CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), + CLK("omap_wdt", "fck", &wdt2_fck, CK_343X), + CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), + CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), + CLK("omap_wdt", "ick", &wdt2_ick, CK_343X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), + CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), + CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X), + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X), + CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X), + CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_343X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X), + CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X), + CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X), + CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X), + CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X), + CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X), + CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X), + CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X), + CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X), + CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X), + CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X), + CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_343X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), + CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X), + CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), + CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), + CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), + CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X), + CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X), + CLK(NULL, "sr1_fck", &sr1_fck, CK_343X), + CLK(NULL, "sr2_fck", &sr2_fck, CK_343X), + CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X), + CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X), + CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X), +}; + + +int __init omap2_clk_init(void) +{ + /* struct prcm_config *prcm; */ + struct omap_clk *c; + /* u32 clkrate; */ + u32 cpu_clkflg; + + if (cpu_is_omap34xx()) { + cpu_mask = RATE_IN_343X; + cpu_clkflg = CK_343X; + + /* + * Update this if there are further clock changes between ES2 + * and production parts + */ + if (omap_rev() == OMAP3430_REV_ES1_0) { + /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ + cpu_clkflg |= CK_3430ES1; + } else { + cpu_mask |= RATE_IN_3430ES2; + cpu_clkflg |= CK_3430ES2; + } + } + + clk_init(&omap2_clk_functions); + + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + clk_preinit(c->lk.clk); + + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + + /* REVISIT: Not yet ready for OMAP3 */ +#if 0 + /* Check the MPU rate set by bootloader */ + clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; +#endif + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, + (core_ck.rate / 1000000), (arm_fck.rate / 1000000)); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* + * Lock DPLL5 and put it in autoidle. + */ + if (omap_rev() >= OMAP3430_REV_ES2_0) + omap3_clk_lock_dpll5(); + + /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ + sdrc_ick_p = clk_get(NULL, "sdrc_ick"); + arm_fck_p = clk_get(NULL, "arm_fck"); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c new file mode 100644 index 000000000000..e370868a79a8 --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx.c @@ -0,0 +1,33 @@ +/* + * OMAP4-specific clock framework functions + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Rajendra Nayak (rnayak@ti.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include "clock.h" + +struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +}; + +const struct clkops clkops_noncore_dpll_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, +}; + +void omap2_clk_prepare_for_reboot(void) +{ + return; +} diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h new file mode 100644 index 000000000000..59b9ced4daa1 --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx.h @@ -0,0 +1,15 @@ +/* + * OMAP4 clock function prototypes and macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H + +#define OMAP4430_MAX_DPLL_MULT 2048 +#define OMAP4430_MAX_DPLL_DIV 128 + +extern const struct clkops clkops_noncore_dpll_ops; + +#endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c new file mode 100644 index 000000000000..2210e227d78a --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -0,0 +1,2766 @@ +/* + * OMAP4 Clock data + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> + +#include <plat/control.h> +#include <plat/clkdev_omap.h> + +#include "clock.h" +#include "clock44xx.h" +#include "cm.h" +#include "cm-regbits-44xx.h" +#include "prm.h" +#include "prm-regbits-44xx.h" + +/* Root clocks */ + +static struct clk extalt_clkin_ck = { + .name = "extalt_clkin_ck", + .rate = 59000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk pad_clks_ck = { + .name = "pad_clks_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk pad_slimbus_core_clks_ck = { + .name = "pad_slimbus_core_clks_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk secure_32k_clk_src_ck = { + .name = "secure_32k_clk_src_ck", + .rate = 32768, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk slimbus_clk = { + .name = "slimbus_clk", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk sys_32k_ck = { + .name = "sys_32k_ck", + .rate = 32768, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk virt_12000000_ck = { + .name = "virt_12000000_ck", + .ops = &clkops_null, + .rate = 12000000, +}; + +static struct clk virt_13000000_ck = { + .name = "virt_13000000_ck", + .ops = &clkops_null, + .rate = 13000000, +}; + +static struct clk virt_16800000_ck = { + .name = "virt_16800000_ck", + .ops = &clkops_null, + .rate = 16800000, +}; + +static struct clk virt_19200000_ck = { + .name = "virt_19200000_ck", + .ops = &clkops_null, + .rate = 19200000, +}; + +static struct clk virt_26000000_ck = { + .name = "virt_26000000_ck", + .ops = &clkops_null, + .rate = 26000000, +}; + +static struct clk virt_27000000_ck = { + .name = "virt_27000000_ck", + .ops = &clkops_null, + .rate = 27000000, +}; + +static struct clk virt_38400000_ck = { + .name = "virt_38400000_ck", + .ops = &clkops_null, + .rate = 38400000, +}; + +static const struct clksel_rate div_1_0_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_1_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_2_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_3_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_4_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_5_rates[] = { + { .div = 1, .val = 5, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_6_rates[] = { + { .div = 1, .val = 6, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_7_rates[] = { + { .div = 1, .val = 7, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel sys_clkin_sel[] = { + { .parent = &virt_12000000_ck, .rates = div_1_1_rates }, + { .parent = &virt_13000000_ck, .rates = div_1_2_rates }, + { .parent = &virt_16800000_ck, .rates = div_1_3_rates }, + { .parent = &virt_19200000_ck, .rates = div_1_4_rates }, + { .parent = &virt_26000000_ck, .rates = div_1_5_rates }, + { .parent = &virt_27000000_ck, .rates = div_1_6_rates }, + { .parent = &virt_38400000_ck, .rates = div_1_7_rates }, + { .parent = NULL }, +}; + +static struct clk sys_clkin_ck = { + .name = "sys_clkin_ck", + .rate = 38400000, + .clksel = sys_clkin_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_SYS_CLKSEL, + .clksel_mask = OMAP4430_SYS_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk utmi_phy_clkout_ck = { + .name = "utmi_phy_clkout_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60mhsp1_ck = { + .name = "xclk60mhsp1_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60mhsp2_ck = { + .name = "xclk60mhsp2_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60motg_ck = { + .name = "xclk60motg_ck", + .rate = 60000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +/* Module clocks and DPLL outputs */ + +static const struct clksel_rate div2_1to2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel dpll_sys_ref_clk_div[] = { + { .parent = &sys_clkin_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_sys_ref_clk = { + .name = "dpll_sys_ref_clk", + .parent = &sys_clkin_ck, + .clksel = dpll_sys_ref_clk_div, + .clksel_reg = OMAP4430_CM_DPLL_SYS_REF_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel abe_dpll_refclk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk abe_dpll_refclk_mux_ck = { + .name = "abe_dpll_refclk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = abe_dpll_refclk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_ABE_PLL_REF_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_ABE */ +static struct dpll_data dpll_abe_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_ABE, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &abe_dpll_refclk_mux_ck, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_ABE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_ABE, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_ABE, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_abe_ck = { + .name = "dpll_abe_ck", + .parent = &abe_dpll_refclk_mux_ck, + .dpll_data = &dpll_abe_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_abe_m2x2_ck = { + .name = "dpll_abe_m2x2_ck", + .parent = &dpll_abe_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk abe_24m_fclk = { + .name = "abe_24m_fclk", + .parent = &dpll_abe_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div3_1to4_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 4, .val = 2, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel abe_clk_div[] = { + { .parent = &dpll_abe_m2x2_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk abe_clk = { + .name = "abe_clk", + .parent = &dpll_abe_m2x2_ck, + .clksel = abe_clk_div, + .clksel_reg = OMAP4430_CM_CLKSEL_ABE, + .clksel_mask = OMAP4430_CLKSEL_OPP_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel aess_fclk_div[] = { + { .parent = &abe_clk, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk aess_fclk = { + .name = "aess_fclk", + .parent = &abe_clk, + .clksel = aess_fclk_div, + .clksel_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_AESS_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div31_1to31_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 3, .val = 2, .flags = RATE_IN_4430 }, + { .div = 4, .val = 3, .flags = RATE_IN_4430 }, + { .div = 5, .val = 4, .flags = RATE_IN_4430 }, + { .div = 6, .val = 5, .flags = RATE_IN_4430 }, + { .div = 7, .val = 6, .flags = RATE_IN_4430 }, + { .div = 8, .val = 7, .flags = RATE_IN_4430 }, + { .div = 9, .val = 8, .flags = RATE_IN_4430 }, + { .div = 10, .val = 9, .flags = RATE_IN_4430 }, + { .div = 11, .val = 10, .flags = RATE_IN_4430 }, + { .div = 12, .val = 11, .flags = RATE_IN_4430 }, + { .div = 13, .val = 12, .flags = RATE_IN_4430 }, + { .div = 14, .val = 13, .flags = RATE_IN_4430 }, + { .div = 15, .val = 14, .flags = RATE_IN_4430 }, + { .div = 16, .val = 15, .flags = RATE_IN_4430 }, + { .div = 17, .val = 16, .flags = RATE_IN_4430 }, + { .div = 18, .val = 17, .flags = RATE_IN_4430 }, + { .div = 19, .val = 18, .flags = RATE_IN_4430 }, + { .div = 20, .val = 19, .flags = RATE_IN_4430 }, + { .div = 21, .val = 20, .flags = RATE_IN_4430 }, + { .div = 22, .val = 21, .flags = RATE_IN_4430 }, + { .div = 23, .val = 22, .flags = RATE_IN_4430 }, + { .div = 24, .val = 23, .flags = RATE_IN_4430 }, + { .div = 25, .val = 24, .flags = RATE_IN_4430 }, + { .div = 26, .val = 25, .flags = RATE_IN_4430 }, + { .div = 27, .val = 26, .flags = RATE_IN_4430 }, + { .div = 28, .val = 27, .flags = RATE_IN_4430 }, + { .div = 29, .val = 28, .flags = RATE_IN_4430 }, + { .div = 30, .val = 29, .flags = RATE_IN_4430 }, + { .div = 31, .val = 30, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel dpll_abe_m3_div[] = { + { .parent = &dpll_abe_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_abe_m3_ck = { + .name = "dpll_abe_m3_ck", + .parent = &dpll_abe_ck, + .clksel = dpll_abe_m3_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_ABE, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel core_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &dpll_abe_m3_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk core_hsd_byp_clk_mux_ck = { + .name = "core_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = core_hsd_byp_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_BYP_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_CORE */ +static struct dpll_data dpll_core_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_CORE, + .clk_bypass = &core_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_CORE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_CORE, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_CORE, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_core_ck = { + .name = "dpll_core_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_core_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_core_m6_div[] = { + { .parent = &dpll_core_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m6_ck = { + .name = "dpll_core_m6_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dbgclk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m6_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk dbgclk_mux_ck = { + .name = "dbgclk_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m2_ck = { + .name = "dpll_core_m2_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk ddrphy_ck = { + .name = "ddrphy_ck", + .parent = &dpll_core_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m5_ck = { + .name = "dpll_core_m5_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel div_core_div[] = { + { .parent = &dpll_core_m5_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk div_core_ck = { + .name = "div_core_ck", + .parent = &dpll_core_m5_ck, + .clksel = div_core_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_CORE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div4_1to8_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 4, .val = 2, .flags = RATE_IN_4430 }, + { .div = 8, .val = 3, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel div_iva_hs_clk_div[] = { + { .parent = &dpll_core_m5_ck, .rates = div4_1to8_rates }, + { .parent = NULL }, +}; + +static struct clk div_iva_hs_clk = { + .name = "div_iva_hs_clk", + .parent = &dpll_core_m5_ck, + .clksel = div_iva_hs_clk_div, + .clksel_reg = OMAP4430_CM_BYPCLK_DPLL_IVA, + .clksel_mask = OMAP4430_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk div_mpu_hs_clk = { + .name = "div_mpu_hs_clk", + .parent = &dpll_core_m5_ck, + .clksel = div_iva_hs_clk_div, + .clksel_reg = OMAP4430_CM_BYPCLK_DPLL_MPU, + .clksel_mask = OMAP4430_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m4_ck = { + .name = "dpll_core_m4_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dll_clk_div_ck = { + .name = "dll_clk_div_ck", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_abe_m2_ck = { + .name = "dpll_abe_m2_ck", + .parent = &dpll_abe_ck, + .clksel = dpll_abe_m3_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m3_ck = { + .name = "dpll_core_m3_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m7_ck = { + .name = "dpll_core_m7_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel iva_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &div_iva_hs_clk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk iva_hsd_byp_clk_mux_ck = { + .name = "iva_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_IVA */ +static struct dpll_data dpll_iva_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_IVA, + .clk_bypass = &iva_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_IVA, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_IVA, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_IVA, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_iva_ck = { + .name = "dpll_iva_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_iva_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_iva_m4_div[] = { + { .parent = &dpll_iva_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_iva_m4_ck = { + .name = "dpll_iva_m4_ck", + .parent = &dpll_iva_ck, + .clksel = dpll_iva_m4_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_IVA, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_iva_m5_ck = { + .name = "dpll_iva_m5_ck", + .parent = &dpll_iva_ck, + .clksel = dpll_iva_m4_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_IVA, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_MPU */ +static struct dpll_data dpll_mpu_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_MPU, + .clk_bypass = &div_mpu_hs_clk, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_MPU, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_MPU, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_MPU, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_mpu_ck = { + .name = "dpll_mpu_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_mpu_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_mpu_m2_div[] = { + { .parent = &dpll_mpu_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_mpu_m2_ck = { + .name = "dpll_mpu_m2_ck", + .parent = &dpll_mpu_ck, + .clksel = dpll_mpu_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk per_hs_clk_div_ck = { + .name = "per_hs_clk_div_ck", + .parent = &dpll_abe_m3_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &per_hs_clk_div_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk per_hsd_byp_clk_mux_ck = { + .name = "per_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = per_hsd_byp_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_BYP_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_PER */ +static struct dpll_data dpll_per_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_PER, + .clk_bypass = &per_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_PER, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_PER, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_PER, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_per_ck = { + .name = "dpll_per_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_per_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_per_m2_div[] = { + { .parent = &dpll_per_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_per_m2_ck = { + .name = "dpll_per_m2_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m2x2_ck = { + .name = "dpll_per_m2x2_ck", + .parent = &dpll_per_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m3_ck = { + .name = "dpll_per_m3_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m4_ck = { + .name = "dpll_per_m4_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m5_ck = { + .name = "dpll_per_m5_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m6_ck = { + .name = "dpll_per_m6_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m7_ck = { + .name = "dpll_per_m7_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_UNIPRO */ +static struct dpll_data dpll_unipro_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_UNIPRO, + .clk_bypass = &dpll_sys_ref_clk, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_UNIPRO, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_UNIPRO, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_unipro_ck = { + .name = "dpll_unipro_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_unipro_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_unipro_m2x2_div[] = { + { .parent = &dpll_unipro_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_unipro_m2x2_ck = { + .name = "dpll_unipro_m2x2_ck", + .parent = &dpll_unipro_ck, + .clksel = dpll_unipro_m2x2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk usb_hs_clk_div_ck = { + .name = "usb_hs_clk_div_ck", + .parent = &dpll_abe_m3_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_USB */ +static struct dpll_data dpll_usb_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_USB, + .clk_bypass = &usb_hs_clk_div_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_USB, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_USB, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_USB, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_usb_ck = { + .name = "dpll_usb_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_usb_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_usb_clkdcoldo_ck = { + .name = "dpll_usb_clkdcoldo_ck", + .parent = &dpll_usb_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_usb_m2_div[] = { + { .parent = &dpll_usb_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_usb_m2_ck = { + .name = "dpll_usb_m2_ck", + .parent = &dpll_usb_ck, + .clksel = dpll_usb_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_USB, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel ducati_clk_mux_sel[] = { + { .parent = &div_core_ck, .rates = div_1_0_rates }, + { .parent = &dpll_per_m6_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk ducati_clk_mux_ck = { + .name = "ducati_clk_mux_ck", + .parent = &div_core_ck, + .clksel = ducati_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_12m_fclk = { + .name = "func_12m_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_24m_clk = { + .name = "func_24m_clk", + .parent = &dpll_per_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_24mc_fclk = { + .name = "func_24mc_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_4to8_rates[] = { + { .div = 4, .val = 0, .flags = RATE_IN_4430 }, + { .div = 8, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel func_48m_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div2_4to8_rates }, + { .parent = NULL }, +}; + +static struct clk func_48m_fclk = { + .name = "func_48m_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = func_48m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_48mc_fclk = { + .name = "func_48mc_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_2to4_rates[] = { + { .div = 2, .val = 0, .flags = RATE_IN_4430 }, + { .div = 4, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel func_64m_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div2_2to4_rates }, + { .parent = NULL }, +}; + +static struct clk func_64m_fclk = { + .name = "func_64m_fclk", + .parent = &dpll_per_m4_ck, + .clksel = func_64m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_96m_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div2_2to4_rates }, + { .parent = NULL }, +}; + +static struct clk func_96m_fclk = { + .name = "func_96m_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = func_96m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel hsmmc6_fclk_sel[] = { + { .parent = &func_64m_fclk, .rates = div_1_0_rates }, + { .parent = &func_96m_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk hsmmc6_fclk = { + .name = "hsmmc6_fclk", + .parent = &func_64m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_1to8_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 8, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel init_60m_fclk_div[] = { + { .parent = &dpll_usb_m2_ck, .rates = div2_1to8_rates }, + { .parent = NULL }, +}; + +static struct clk init_60m_fclk = { + .name = "init_60m_fclk", + .parent = &dpll_usb_m2_ck, + .clksel = init_60m_fclk_div, + .clksel_reg = OMAP4430_CM_CLKSEL_USB_60MHZ, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l3_div_div[] = { + { .parent = &div_core_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk l3_div_ck = { + .name = "l3_div_ck", + .parent = &div_core_ck, + .clksel = l3_div_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_L3_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l4_div_div[] = { + { .parent = &l3_div_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk l4_div_ck = { + .name = "l4_div_ck", + .parent = &l3_div_ck, + .clksel = l4_div_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_L4_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk lp_clk_div_ck = { + .name = "lp_clk_div_ck", + .parent = &dpll_abe_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l4_wkup_clk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &lp_clk_div_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk l4_wkup_clk_mux_ck = { + .name = "l4_wkup_clk_mux_ck", + .parent = &sys_clkin_ck, + .clksel = l4_wkup_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4_WKUP_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_abe_nc_fclk_div[] = { + { .parent = &dpll_abe_m2_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk per_abe_nc_fclk = { + .name = "per_abe_nc_fclk", + .parent = &dpll_abe_m2_ck, + .clksel = per_abe_nc_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel mcasp2_fclk_sel[] = { + { .parent = &func_96m_fclk, .rates = div_1_0_rates }, + { .parent = &per_abe_nc_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk mcasp2_fclk = { + .name = "mcasp2_fclk", + .parent = &func_96m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk mcasp3_fclk = { + .name = "mcasp3_fclk", + .parent = &func_96m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk ocp_abe_iclk = { + .name = "ocp_abe_iclk", + .parent = &aess_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk per_abe_24m_fclk = { + .name = "per_abe_24m_fclk", + .parent = &dpll_abe_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel pmd_stm_clock_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m6_ck, .rates = div_1_1_rates }, + { .parent = &dpll_per_m7_ck, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk pmd_stm_clock_mux_ck = { + .name = "pmd_stm_clock_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk pmd_trace_clk_mux_ck = { + .name = "pmd_trace_clk_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk syc_clk_div_ck = { + .name = "syc_clk_div_ck", + .parent = &sys_clkin_ck, + .clksel = dpll_sys_ref_clk_div, + .clksel_reg = OMAP4430_CM_ABE_DSS_SYS_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* Leaf clocks controlled by modules */ + +static struct clk aes1_ck = { + .name = "aes1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_AES1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk aes2_ck = { + .name = "aes2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_AES2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk aess_ck = { + .name = "aess_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &aess_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk cust_efuse_ck = { + .name = "cust_efuse_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_cefuse_clkdm", + .parent = &sys_clkin_ck, + .recalc = &followparent_recalc, +}; + +static struct clk des3des_ck = { + .name = "des3des_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_DES3DES_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel dmic_sync_mux_sel[] = { + { .parent = &abe_24m_fclk, .rates = div_1_0_rates }, + { .parent = &syc_clk_div_ck, .rates = div_1_1_rates }, + { .parent = &func_24m_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk dmic_sync_mux_ck = { + .name = "dmic_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_dmic_abe_gfclk_sel[] = { + { .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_dmic_abe_gfclk into dmic_ck */ +static struct clk dmic_ck = { + .name = "dmic_ck", + .parent = &dmic_sync_mux_ck, + .clksel = func_dmic_abe_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk dss_ck = { + .name = "dss_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_dss_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk ducati_ck = { + .name = "ducati_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ducati_clkdm", + .parent = &ducati_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk emif1_ck = { + .name = "emif1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_emif_clkdm", + .parent = &ddrphy_ck, + .recalc = &followparent_recalc, +}; + +static struct clk emif2_ck = { + .name = "emif2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_emif_clkdm", + .parent = &ddrphy_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel fdif_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +/* Merged fdif_fclk into fdif_ck */ +static struct clk fdif_ck = { + .name = "fdif_ck", + .parent = &dpll_per_m4_ck, + .clksel = fdif_fclk_div, + .clksel_reg = OMAP4430_CM_CAM_FDIF_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_FCLK_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_CAM_FDIF_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "iss_clkdm", +}; + +static const struct clksel per_sgx_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk per_sgx_fclk = { + .name = "per_sgx_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = per_sgx_fclk_div, + .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PER_192M_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel sgx_clk_mux_sel[] = { + { .parent = &dpll_core_m7_ck, .rates = div_1_0_rates }, + { .parent = &per_sgx_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged sgx_clk_mux into gfx_ck */ +static struct clk gfx_ck = { + .name = "gfx_ck", + .parent = &dpll_core_m7_ck, + .clksel = sgx_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SGX_FCLK_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_gfx_clkdm", +}; + +static struct clk gpio1_ck = { + .name = "gpio1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_ck = { + .name = "gpio2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_ck = { + .name = "gpio3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_ck = { + .name = "gpio4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_ck = { + .name = "gpio5_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_ck = { + .name = "gpio6_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpmc_ck = { + .name = "gpmc_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3_2_GPMC_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_2_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel dmt1_clk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged dmt1_clk_mux into gptimer1_ck */ +static struct clk gptimer1_ck = { + .name = "gptimer1_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", +}; + +/* Merged cm2_dm10_mux into gptimer10_ck */ +static struct clk gptimer10_ck = { + .name = "gptimer10_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm11_mux into gptimer11_ck */ +static struct clk gptimer11_ck = { + .name = "gptimer11_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm2_mux into gptimer2_ck */ +static struct clk gptimer2_ck = { + .name = "gptimer2_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm3_mux into gptimer3_ck */ +static struct clk gptimer3_ck = { + .name = "gptimer3_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm4_mux into gptimer4_ck */ +static struct clk gptimer4_ck = { + .name = "gptimer4_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static const struct clksel timer5_sync_mux_sel[] = { + { .parent = &syc_clk_div_ck, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged timer5_sync_mux into gptimer5_ck */ +static struct clk gptimer5_ck = { + .name = "gptimer5_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer6_sync_mux into gptimer6_ck */ +static struct clk gptimer6_ck = { + .name = "gptimer6_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer7_sync_mux into gptimer7_ck */ +static struct clk gptimer7_ck = { + .name = "gptimer7_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer8_sync_mux into gptimer8_ck */ +static struct clk gptimer8_ck = { + .name = "gptimer8_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged cm2_dm9_mux into gptimer9_ck */ +static struct clk gptimer9_ck = { + .name = "gptimer9_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static struct clk hdq1w_ck = { + .name = "hdq1w_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_HDQ1W_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_12m_fclk, + .recalc = &followparent_recalc, +}; + +/* Merged hsi_fclk into hsi_ck */ +static struct clk hsi_ck = { + .name = "hsi_ck", + .parent = &dpll_per_m2x2_ck, + .clksel = per_sgx_fclk_div, + .clksel_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_24_25_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +static struct clk i2c1_ck = { + .name = "i2c1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_ck = { + .name = "i2c2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_ck = { + .name = "i2c3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c4_ck = { + .name = "i2c4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk iss_ck = { + .name = "iss_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CAM_ISS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "iss_clkdm", + .parent = &ducati_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk ivahd_ck = { + .name = "ivahd_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ivahd_clkdm", + .parent = &dpll_iva_m5_ck, + .recalc = &followparent_recalc, +}; + +static struct clk keyboard_ck = { + .name = "keyboard_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk l3_instr_interconnect_ck = { + .name = "l3_instr_interconnect_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk l3_interconnect_3_ck = { + .name = "l3_interconnect_3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_L3_3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk mcasp_sync_mux_ck = { + .name = "mcasp_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcasp_abe_gfclk_sel[] = { + { .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcasp_abe_gfclk into mcasp_ck */ +static struct clk mcasp_ck = { + .name = "mcasp_ck", + .parent = &mcasp_sync_mux_ck, + .clksel = func_mcasp_abe_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp1_sync_mux_ck = { + .name = "mcbsp1_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp1_gfclk_sel[] = { + { .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp1_gfclk into mcbsp1_ck */ +static struct clk mcbsp1_ck = { + .name = "mcbsp1_ck", + .parent = &mcbsp1_sync_mux_ck, + .clksel = func_mcbsp1_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp2_sync_mux_ck = { + .name = "mcbsp2_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp2_gfclk_sel[] = { + { .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp2_gfclk into mcbsp2_ck */ +static struct clk mcbsp2_ck = { + .name = "mcbsp2_ck", + .parent = &mcbsp2_sync_mux_ck, + .clksel = func_mcbsp2_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp3_sync_mux_ck = { + .name = "mcbsp3_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp3_gfclk_sel[] = { + { .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp3_gfclk into mcbsp3_ck */ +static struct clk mcbsp3_ck = { + .name = "mcbsp3_ck", + .parent = &mcbsp3_sync_mux_ck, + .clksel = func_mcbsp3_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp4_sync_mux_ck = { + .name = "mcbsp4_sync_mux_ck", + .parent = &func_96m_fclk, + .clksel = mcasp2_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_mcbsp4_gfclk_sel[] = { + { .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged per_mcbsp4_gfclk into mcbsp4_ck */ +static struct clk mcbsp4_ck = { + .name = "mcbsp4_ck", + .parent = &mcbsp4_sync_mux_ck, + .clksel = per_mcbsp4_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_24_24_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static struct clk mcspi1_ck = { + .name = "mcspi1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_ck = { + .name = "mcspi2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_ck = { + .name = "mcspi3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_ck = { + .name = "mcspi4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +/* Merged hsmmc1_fclk into mmc1_ck */ +static struct clk mmc1_ck = { + .name = "mmc1_ck", + .parent = &func_64m_fclk, + .clksel = hsmmc6_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +/* Merged hsmmc2_fclk into mmc2_ck */ +static struct clk mmc2_ck = { + .name = "mmc2_ck", + .parent = &func_64m_fclk, + .clksel = hsmmc6_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +static struct clk mmc3_ck = { + .name = "mmc3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mmc4_ck = { + .name = "mmc4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mmc5_ck = { + .name = "mmc5_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk ocp_wp1_ck = { + .name = "ocp_wp1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk pdm_ck = { + .name = "pdm_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &pad_clks_ck, + .recalc = &followparent_recalc, +}; + +static struct clk pkaeip29_ck = { + .name = "pkaeip29_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk rng_ck = { + .name = "rng_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_RNG_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sha2md51_ck = { + .name = "sha2md51_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sl2_ck = { + .name = "sl2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_IVAHD_SL2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ivahd_clkdm", + .parent = &dpll_iva_m5_ck, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus1_ck = { + .name = "slimbus1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &ocp_abe_iclk, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus2_ck = { + .name = "slimbus2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_core_ck = { + .name = "sr_core_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_iva_ck = { + .name = "sr_iva_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_mpu_ck = { + .name = "sr_mpu_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk tesla_ck = { + .name = "tesla_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "tesla_clkdm", + .parent = &dpll_iva_m4_ck, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_ck = { + .name = "uart1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart3_ck = { + .name = "uart3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart4_ck = { + .name = "uart4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk unipro1_ck = { + .name = "unipro1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_host_ck = { + .name = "usb_host_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &init_60m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_host_fs_ck = { + .name = "usb_host_fs_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &func_48mc_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_otg_ck = { + .name = "usb_otg_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usb_tll_ck = { + .name = "usb_tll_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usbphyocp2scp_ck = { + .name = "usbphyocp2scp_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usim_ck = { + .name = "usim_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_ck = { + .name = "wdt2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_ck = { + .name = "wdt3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +/* Remaining optional clocks */ +static const struct clksel otg_60m_gfclk_sel[] = { + { .parent = &utmi_phy_clkout_ck, .rates = div_1_0_rates }, + { .parent = &xclk60motg_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk otg_60m_gfclk_ck = { + .name = "otg_60m_gfclk_ck", + .parent = &utmi_phy_clkout_ck, + .clksel = otg_60m_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_60M_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel stm_clk_div_div[] = { + { .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk stm_clk_div_ck = { + .name = "stm_clk_div_ck", + .parent = &pmd_stm_clock_mux_ck, + .clksel = stm_clk_div_div, + .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PMD_STM_CLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel trace_clk_div_div[] = { + { .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk trace_clk_div_ck = { + .name = "trace_clk_div_ck", + .parent = &pmd_trace_clk_mux_ck, + .clksel = trace_clk_div_div, + .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_14to18_rates[] = { + { .div = 14, .val = 0, .flags = RATE_IN_4430 }, + { .div = 18, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel usim_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div2_14to18_rates }, + { .parent = NULL }, +}; + +static struct clk usim_fclk = { + .name = "usim_fclk", + .parent = &dpll_per_m4_ck, + .clksel = usim_fclk_div, + .clksel_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel utmi_p1_gfclk_sel[] = { + { .parent = &init_60m_fclk, .rates = div_1_0_rates }, + { .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk utmi_p1_gfclk_ck = { + .name = "utmi_p1_gfclk_ck", + .parent = &init_60m_fclk, + .clksel = utmi_p1_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_UTMI_P1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel utmi_p2_gfclk_sel[] = { + { .parent = &init_60m_fclk, .rates = div_1_0_rates }, + { .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk utmi_p2_gfclk_ck = { + .name = "utmi_p2_gfclk_ck", + .parent = &init_60m_fclk, + .clksel = utmi_p2_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_UTMI_P2_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* + * clkdev + */ + +static struct omap_clk omap44xx_clks[] = { + CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck, CK_443X), + CLK(NULL, "pad_clks_ck", &pad_clks_ck, CK_443X), + CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck, CK_443X), + CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck, CK_443X), + CLK(NULL, "slimbus_clk", &slimbus_clk, CK_443X), + CLK(NULL, "sys_32k_ck", &sys_32k_ck, CK_443X), + CLK(NULL, "virt_12000000_ck", &virt_12000000_ck, CK_443X), + CLK(NULL, "virt_13000000_ck", &virt_13000000_ck, CK_443X), + CLK(NULL, "virt_16800000_ck", &virt_16800000_ck, CK_443X), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_443X), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_443X), + CLK(NULL, "virt_27000000_ck", &virt_27000000_ck, CK_443X), + CLK(NULL, "virt_38400000_ck", &virt_38400000_ck, CK_443X), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_443X), + CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck, CK_443X), + CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck, CK_443X), + CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck, CK_443X), + CLK(NULL, "xclk60motg_ck", &xclk60motg_ck, CK_443X), + CLK(NULL, "dpll_sys_ref_clk", &dpll_sys_ref_clk, CK_443X), + CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck, CK_443X), + CLK(NULL, "dpll_abe_ck", &dpll_abe_ck, CK_443X), + CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, CK_443X), + CLK(NULL, "abe_24m_fclk", &abe_24m_fclk, CK_443X), + CLK(NULL, "abe_clk", &abe_clk, CK_443X), + CLK(NULL, "aess_fclk", &aess_fclk, CK_443X), + CLK(NULL, "dpll_abe_m3_ck", &dpll_abe_m3_ck, CK_443X), + CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_443X), + CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_443X), + CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck, CK_443X), + CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck, CK_443X), + CLK(NULL, "ddrphy_ck", &ddrphy_ck, CK_443X), + CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_443X), + CLK(NULL, "div_core_ck", &div_core_ck, CK_443X), + CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk, CK_443X), + CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk, CK_443X), + CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_443X), + CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck, CK_443X), + CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck, CK_443X), + CLK(NULL, "dpll_core_m3_ck", &dpll_core_m3_ck, CK_443X), + CLK(NULL, "dpll_core_m7_ck", &dpll_core_m7_ck, CK_443X), + CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_iva_ck", &dpll_iva_ck, CK_443X), + CLK(NULL, "dpll_iva_m4_ck", &dpll_iva_m4_ck, CK_443X), + CLK(NULL, "dpll_iva_m5_ck", &dpll_iva_m5_ck, CK_443X), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_443X), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_443X), + CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck, CK_443X), + CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_443X), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_443X), + CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, CK_443X), + CLK(NULL, "dpll_per_m3_ck", &dpll_per_m3_ck, CK_443X), + CLK(NULL, "dpll_per_m4_ck", &dpll_per_m4_ck, CK_443X), + CLK(NULL, "dpll_per_m5_ck", &dpll_per_m5_ck, CK_443X), + CLK(NULL, "dpll_per_m6_ck", &dpll_per_m6_ck, CK_443X), + CLK(NULL, "dpll_per_m7_ck", &dpll_per_m7_ck, CK_443X), + CLK(NULL, "dpll_unipro_ck", &dpll_unipro_ck, CK_443X), + CLK(NULL, "dpll_unipro_m2x2_ck", &dpll_unipro_m2x2_ck, CK_443X), + CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X), + CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X), + CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X), + CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck, CK_443X), + CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck, CK_443X), + CLK(NULL, "func_12m_fclk", &func_12m_fclk, CK_443X), + CLK(NULL, "func_24m_clk", &func_24m_clk, CK_443X), + CLK(NULL, "func_24mc_fclk", &func_24mc_fclk, CK_443X), + CLK(NULL, "func_48m_fclk", &func_48m_fclk, CK_443X), + CLK(NULL, "func_48mc_fclk", &func_48mc_fclk, CK_443X), + CLK(NULL, "func_64m_fclk", &func_64m_fclk, CK_443X), + CLK(NULL, "func_96m_fclk", &func_96m_fclk, CK_443X), + CLK(NULL, "hsmmc6_fclk", &hsmmc6_fclk, CK_443X), + CLK(NULL, "init_60m_fclk", &init_60m_fclk, CK_443X), + CLK(NULL, "l3_div_ck", &l3_div_ck, CK_443X), + CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), + CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), + CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), + CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), + CLK(NULL, "mcasp2_fclk", &mcasp2_fclk, CK_443X), + CLK(NULL, "mcasp3_fclk", &mcasp3_fclk, CK_443X), + CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), + CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), + CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X), + CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X), + CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X), + CLK(NULL, "aes1_ck", &aes1_ck, CK_443X), + CLK(NULL, "aes2_ck", &aes2_ck, CK_443X), + CLK(NULL, "aess_ck", &aess_ck, CK_443X), + CLK(NULL, "cust_efuse_ck", &cust_efuse_ck, CK_443X), + CLK(NULL, "des3des_ck", &des3des_ck, CK_443X), + CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), + CLK(NULL, "dmic_ck", &dmic_ck, CK_443X), + CLK(NULL, "dss_ck", &dss_ck, CK_443X), + CLK(NULL, "ducati_ck", &ducati_ck, CK_443X), + CLK(NULL, "emif1_ck", &emif1_ck, CK_443X), + CLK(NULL, "emif2_ck", &emif2_ck, CK_443X), + CLK(NULL, "fdif_ck", &fdif_ck, CK_443X), + CLK(NULL, "per_sgx_fclk", &per_sgx_fclk, CK_443X), + CLK(NULL, "gfx_ck", &gfx_ck, CK_443X), + CLK(NULL, "gpio1_ck", &gpio1_ck, CK_443X), + CLK(NULL, "gpio2_ck", &gpio2_ck, CK_443X), + CLK(NULL, "gpio3_ck", &gpio3_ck, CK_443X), + CLK(NULL, "gpio4_ck", &gpio4_ck, CK_443X), + CLK(NULL, "gpio5_ck", &gpio5_ck, CK_443X), + CLK(NULL, "gpio6_ck", &gpio6_ck, CK_443X), + CLK(NULL, "gpmc_ck", &gpmc_ck, CK_443X), + CLK(NULL, "gptimer1_ck", &gptimer1_ck, CK_443X), + CLK(NULL, "gptimer10_ck", &gptimer10_ck, CK_443X), + CLK(NULL, "gptimer11_ck", &gptimer11_ck, CK_443X), + CLK(NULL, "gptimer2_ck", &gptimer2_ck, CK_443X), + CLK(NULL, "gptimer3_ck", &gptimer3_ck, CK_443X), + CLK(NULL, "gptimer4_ck", &gptimer4_ck, CK_443X), + CLK(NULL, "gptimer5_ck", &gptimer5_ck, CK_443X), + CLK(NULL, "gptimer6_ck", &gptimer6_ck, CK_443X), + CLK(NULL, "gptimer7_ck", &gptimer7_ck, CK_443X), + CLK(NULL, "gptimer8_ck", &gptimer8_ck, CK_443X), + CLK(NULL, "gptimer9_ck", &gptimer9_ck, CK_443X), + CLK("omap2_hdq.0", "ick", &hdq1w_ck, CK_443X), + CLK(NULL, "hsi_ck", &hsi_ck, CK_443X), + CLK("i2c_omap.1", "ick", &i2c1_ck, CK_443X), + CLK("i2c_omap.2", "ick", &i2c2_ck, CK_443X), + CLK("i2c_omap.3", "ick", &i2c3_ck, CK_443X), + CLK("i2c_omap.4", "ick", &i2c4_ck, CK_443X), + CLK(NULL, "iss_ck", &iss_ck, CK_443X), + CLK(NULL, "ivahd_ck", &ivahd_ck, CK_443X), + CLK(NULL, "keyboard_ck", &keyboard_ck, CK_443X), + CLK(NULL, "l3_instr_interconnect_ck", &l3_instr_interconnect_ck, CK_443X), + CLK(NULL, "l3_interconnect_3_ck", &l3_interconnect_3_ck, CK_443X), + CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), + CLK(NULL, "mcasp_ck", &mcasp_ck, CK_443X), + CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_ck, CK_443X), + CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_ck, CK_443X), + CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_ck, CK_443X), + CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_ck, CK_443X), + CLK("omap2_mcspi.1", "fck", &mcspi1_ck, CK_443X), + CLK("omap2_mcspi.2", "fck", &mcspi2_ck, CK_443X), + CLK("omap2_mcspi.3", "fck", &mcspi3_ck, CK_443X), + CLK("omap2_mcspi.4", "fck", &mcspi4_ck, CK_443X), + CLK("mmci-omap-hs.0", "fck", &mmc1_ck, CK_443X), + CLK("mmci-omap-hs.1", "fck", &mmc2_ck, CK_443X), + CLK("mmci-omap-hs.2", "fck", &mmc3_ck, CK_443X), + CLK("mmci-omap-hs.3", "fck", &mmc4_ck, CK_443X), + CLK("mmci-omap-hs.4", "fck", &mmc5_ck, CK_443X), + CLK(NULL, "ocp_wp1_ck", &ocp_wp1_ck, CK_443X), + CLK(NULL, "pdm_ck", &pdm_ck, CK_443X), + CLK(NULL, "pkaeip29_ck", &pkaeip29_ck, CK_443X), + CLK("omap_rng", "ick", &rng_ck, CK_443X), + CLK(NULL, "sha2md51_ck", &sha2md51_ck, CK_443X), + CLK(NULL, "sl2_ck", &sl2_ck, CK_443X), + CLK(NULL, "slimbus1_ck", &slimbus1_ck, CK_443X), + CLK(NULL, "slimbus2_ck", &slimbus2_ck, CK_443X), + CLK(NULL, "sr_core_ck", &sr_core_ck, CK_443X), + CLK(NULL, "sr_iva_ck", &sr_iva_ck, CK_443X), + CLK(NULL, "sr_mpu_ck", &sr_mpu_ck, CK_443X), + CLK(NULL, "tesla_ck", &tesla_ck, CK_443X), + CLK(NULL, "uart1_ck", &uart1_ck, CK_443X), + CLK(NULL, "uart2_ck", &uart2_ck, CK_443X), + CLK(NULL, "uart3_ck", &uart3_ck, CK_443X), + CLK(NULL, "uart4_ck", &uart4_ck, CK_443X), + CLK(NULL, "unipro1_ck", &unipro1_ck, CK_443X), + CLK(NULL, "usb_host_ck", &usb_host_ck, CK_443X), + CLK(NULL, "usb_host_fs_ck", &usb_host_fs_ck, CK_443X), + CLK("musb_hdrc", "ick", &usb_otg_ck, CK_443X), + CLK(NULL, "usb_tll_ck", &usb_tll_ck, CK_443X), + CLK(NULL, "usbphyocp2scp_ck", &usbphyocp2scp_ck, CK_443X), + CLK(NULL, "usim_ck", &usim_ck, CK_443X), + CLK("omap_wdt", "fck", &wdt2_ck, CK_443X), + CLK(NULL, "wdt3_ck", &wdt3_ck, CK_443X), + CLK(NULL, "otg_60m_gfclk_ck", &otg_60m_gfclk_ck, CK_443X), + CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), + CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X), + CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), + CLK(NULL, "utmi_p1_gfclk_ck", &utmi_p1_gfclk_ck, CK_443X), + CLK(NULL, "utmi_p2_gfclk_ck", &utmi_p2_gfclk_ck, CK_443X), +}; + +int __init omap2_clk_init(void) +{ + /* struct prcm_config *prcm; */ + struct omap_clk *c; + /* u32 clkrate; */ + u32 cpu_clkflg; + + if (cpu_is_omap44xx()) { + cpu_mask = RATE_IN_4430; + cpu_clkflg = CK_443X; + } + + clk_init(&omap2_clk_functions); + + for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); + c++) + clk_preinit(c->lk.clk); + + for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); + c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + /* TODO + omap2_init_clk_clkdm(c->lk.clk); + */ + } + + recalculate_root_clocks(); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c new file mode 100644 index 000000000000..f69096b88cdb --- /dev/null +++ b/arch/arm/mach-omap2/clock_common_data.c @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-omap2/clock_common_data.c + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains clock data that is common to both the OMAP2xxx and + * OMAP3xxx clock definition files. + */ + +#include "clock.h" + +/* clksel_rate data common to 24xx/343x */ +const struct clksel_rate gpt_32k_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +const struct clksel_rate gpt_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +const struct clksel_rate gfx_l3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 0 } +}; + diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index fcd82320a6a3..1a45ed1e8ba1 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -2,7 +2,7 @@ * OMAP2/3 clockdomain framework functions * * Copyright (C) 2008 Texas Instruments, Inc. - * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2008-2009 Nokia Corporation * * Written by Paul Walmsley and Jouni Högander * @@ -10,9 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN -# define DEBUG -#endif +#undef DEBUG #include <linux/module.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h new file mode 100644 index 000000000000..0e67f75aa35c --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-44xx.h @@ -0,0 +1,1474 @@ +/* + * OMAP44xx Clock Management register bits + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H + +#include "cm.h" + + +/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ +#define OMAP4430_ABE_DYNDEP_SHIFT (1 << 3) +#define OMAP4430_ABE_DYNDEP_MASK BITFIELD(3, 3) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_ABE_STATDEP_SHIFT (1 << 3) +#define OMAP4430_ABE_STATDEP_MASK BITFIELD(3, 3) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_ALWONCORE_DYNDEP_SHIFT (1 << 16) +#define OMAP4430_ALWONCORE_DYNDEP_MASK BITFIELD(16, 16) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ +#define OMAP4430_ALWONCORE_STATDEP_SHIFT (1 << 16) +#define OMAP4430_ALWONCORE_STATDEP_MASK BITFIELD(16, 16) + +/* + * Used by CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB, + * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, + * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU + */ +#define OMAP4430_AUTO_DPLL_MODE_SHIFT (1 << 0) +#define OMAP4430_AUTO_DPLL_MODE_MASK BITFIELD(0, 2) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_CEFUSE_DYNDEP_SHIFT (1 << 17) +#define OMAP4430_CEFUSE_DYNDEP_MASK BITFIELD(17, 17) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ +#define OMAP4430_CEFUSE_STATDEP_SHIFT (1 << 17) +#define OMAP4430_CEFUSE_STATDEP_MASK BITFIELD(17, 17) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK BITFIELD(9, 9) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK BITFIELD(11, 11) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK BITFIELD(13, 13) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK BITFIELD(9, 9) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK BITFIELD(12, 12) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT (1 << 14) +#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK BITFIELD(14, 14) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK BITFIELD(9, 9) + +/* Used by CM_DUCATI_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT (1 << 15) +#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK BITFIELD(15, 15) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT (1 << 20) +#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK BITFIELD(20, 20) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT (1 << 26) +#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK BITFIELD(26, 26) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT (1 << 21) +#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK BITFIELD(21, 21) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT (1 << 27) +#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK BITFIELD(27, 27) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT (1 << 31) +#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK BITFIELD(31, 31) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK BITFIELD(12, 12) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT (1 << 28) +#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK BITFIELD(28, 28) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT (1 << 29) +#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK BITFIELD(29, 29) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT (1 << 16) +#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK BITFIELD(16, 16) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT (1 << 17) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK BITFIELD(17, 17) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT (1 << 18) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK BITFIELD(18, 18) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT (1 << 19) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK BITFIELD(19, 19) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK BITFIELD(8, 8) + +/* Used by CM_IVAHD_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT (1 << 14) +#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK BITFIELD(14, 14) + +/* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_D2D_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_SDMA_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_GFX_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INSTR_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4SEC_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK BITFIELD(8, 8) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_D2D_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4SEC_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK BITFIELD(12, 12) + +/* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT (1 << 16) +#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK BITFIELD(16, 16) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT (1 << 17) +#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK BITFIELD(17, 17) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT (1 << 18) +#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK BITFIELD(18, 18) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT (1 << 19) +#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK BITFIELD(19, 19) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT (1 << 25) +#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK BITFIELD(25, 25) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT (1 << 20) +#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK BITFIELD(20, 20) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT (1 << 21) +#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK BITFIELD(21, 21) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT (1 << 22) +#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK BITFIELD(22, 22) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT (1 << 24) +#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK BITFIELD(24, 24) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_GFX_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK BITFIELD(11, 11) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK BITFIELD(10, 10) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_TESLA_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT (1 << 22) +#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK BITFIELD(22, 22) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT (1 << 23) +#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK BITFIELD(23, 23) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT (1 << 24) +#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT (1 << 15) +#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK BITFIELD(15, 15) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT (1 << 30) +#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK BITFIELD(30, 30) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT (1 << 25) +#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK BITFIELD(25, 25) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK BITFIELD(11, 11) + +/* + * Used by CM_WKUP_TIMER1_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, + * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, + * CM1_ABE_TIMER8_CLKCTRL + */ +#define OMAP4430_CLKSEL_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_MASK BITFIELD(24, 24) + +/* + * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL, + * CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT, + * CM_CLKSEL_USB_60MHZ + */ +#define OMAP4430_CLKSEL_0_0_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_0_0_MASK BITFIELD(0, 0) + +/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */ +#define OMAP4430_CLKSEL_0_1_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_0_1_MASK BITFIELD(0, 1) + +/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */ +#define OMAP4430_CLKSEL_24_25_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_24_25_MASK BITFIELD(24, 25) + +/* Used by CM_L3INIT_USB_OTG_CLKCTRL */ +#define OMAP4430_CLKSEL_60M_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_60M_MASK BITFIELD(24, 24) + +/* Used by CM1_ABE_AESS_CLKCTRL */ +#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_AESS_FCLK_MASK BITFIELD(24, 24) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_CORE_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_CORE_MASK BITFIELD(0, 0) + +/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_CLKSEL_CORE_1_1_SHIFT (1 << 1) +#define OMAP4430_CLKSEL_CORE_1_1_MASK BITFIELD(1, 1) + +/* Used by CM_WKUP_USIM_CLKCTRL */ +#define OMAP4430_CLKSEL_DIV_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_DIV_MASK BITFIELD(24, 24) + +/* Used by CM_CAM_FDIF_CLKCTRL */ +#define OMAP4430_CLKSEL_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_FCLK_MASK BITFIELD(24, 25) + +/* Used by CM_L4PER_MCBSP4_CLKCTRL */ +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK BITFIELD(25, 25) + +/* + * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL, + * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, + * CM1_ABE_MCBSP3_CLKCTRL + */ +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT (1 << 26) +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK BITFIELD(26, 27) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_L3_SHIFT (1 << 4) +#define OMAP4430_CLKSEL_L3_MASK BITFIELD(4, 4) + +/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT (1 << 2) +#define OMAP4430_CLKSEL_L3_SHADOW_MASK BITFIELD(2, 2) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_L4_SHIFT (1 << 8) +#define OMAP4430_CLKSEL_L4_MASK BITFIELD(8, 8) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_CLKSEL_OPP_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_OPP_MASK BITFIELD(0, 1) + +/* Used by CM_GFX_GFX_CLKCTRL */ +#define OMAP4430_CLKSEL_PER_192M_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_PER_192M_MASK BITFIELD(25, 26) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT (1 << 27) +#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK BITFIELD(27, 29) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK BITFIELD(24, 26) + +/* Used by CM_GFX_GFX_CLKCTRL */ +#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SGX_FCLK_MASK BITFIELD(24, 24) + +/* + * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, + * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL + */ +#define OMAP4430_CLKSEL_SOURCE_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SOURCE_MASK BITFIELD(24, 25) + +/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */ +#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SOURCE_24_24_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_CLKSEL_UTMI_P1_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_UTMI_P1_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_CLKSEL_UTMI_P2_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_UTMI_P2_MASK BITFIELD(25, 25) + +/* + * Used by CM_WKUP_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_D2D_CLKSTCTRL, + * CM_DUCATI_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL, + * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_MEMIF_CLKSTCTRL, + * CM_SDMA_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL, + * CM_L3INIT_CLKSTCTRL, CM_CAM_CLKSTCTRL, CM_CEFUSE_CLKSTCTRL, + * CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3_1_CLKSTCTRL_RESTORE, + * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL_RESTORE, + * CM_L4PER_CLKSTCTRL_RESTORE, CM_MEMIF_CLKSTCTRL_RESTORE, CM_ALWON_CLKSTCTRL, + * CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL, + * CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE + */ +#define OMAP4430_CLKTRCTRL_SHIFT (1 << 0) +#define OMAP4430_CLKTRCTRL_MASK BITFIELD(0, 1) + +/* Used by CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT (1 << 0) +#define OMAP4430_CORE_DPLL_EMU_DIV_MASK BITFIELD(0, 6) + +/* Used by CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT (1 << 8) +#define OMAP4430_CORE_DPLL_EMU_MULT_MASK BITFIELD(8, 18) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_D2D_DYNDEP_SHIFT (1 << 18) +#define OMAP4430_D2D_DYNDEP_MASK BITFIELD(18, 18) + +/* Used by CM_MPU_STATICDEP */ +#define OMAP4430_D2D_STATDEP_SHIFT (1 << 18) +#define OMAP4430_D2D_STATDEP_MASK BITFIELD(18, 18) + +/* + * Used by CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO, + * CM_SSC_DELTAMSTEP_DPLL_USB, CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE, + * CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE, + * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA, + * CM_SSC_DELTAMSTEP_DPLL_MPU + */ +#define OMAP4430_DELTAMSTEP_SHIFT (1 << 0) +#define OMAP4430_DELTAMSTEP_MASK BITFIELD(0, 19) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DLL_OVERRIDE_SHIFT (1 << 2) +#define OMAP4430_DLL_OVERRIDE_MASK BITFIELD(2, 2) + +/* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */ +#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT (1 << 0) +#define OMAP4430_DLL_OVERRIDE_0_0_MASK BITFIELD(0, 0) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DLL_RESET_SHIFT (1 << 3) +#define OMAP4430_DLL_RESET_MASK BITFIELD(3, 3) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT (1 << 23) +#define OMAP4430_DPLL_BYP_CLKSEL_MASK BITFIELD(23, 23) + +/* Used by CM_CLKDCOLDO_DPLL_USB */ +#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */ +#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT (1 << 20) +#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK BITFIELD(20, 20) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */ +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT (1 << 10) +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BITFIELD(10, 10) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUT_DIV_MASK BITFIELD(0, 4) + +/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */ +#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK BITFIELD(0, 6) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK BITFIELD(5, 5) + +/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */ +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT (1 << 7) +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK BITFIELD(7, 7) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE, + * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT (1 << 8) +#define OMAP4430_DPLL_CORE_DPLL_EN_MASK BITFIELD(8, 10) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT (1 << 11) +#define OMAP4430_DPLL_CORE_M2_DIV_MASK BITFIELD(11, 15) + +/* Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT (1 << 3) +#define OMAP4430_DPLL_CORE_M5_DIV_MASK BITFIELD(3, 7) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT (1 << 1) +#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK BITFIELD(1, 1) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_DIV_MASK BITFIELD(0, 6) + +/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_DIV_0_7_SHIFT (1 << 0) +#define OMAP4430_DPLL_DIV_0_7_MASK BITFIELD(0, 7) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT (1 << 8) +#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK BITFIELD(8, 8) + +/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */ +#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT (1 << 3) +#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK BITFIELD(3, 3) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_EN_SHIFT (1 << 0) +#define OMAP4430_DPLL_EN_MASK BITFIELD(0, 2) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_LPMODE_EN_SHIFT (1 << 10) +#define OMAP4430_DPLL_LPMODE_EN_MASK BITFIELD(10, 10) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_MULT_SHIFT (1 << 8) +#define OMAP4430_DPLL_MULT_MASK BITFIELD(8, 18) + +/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_MULT_USB_SHIFT (1 << 8) +#define OMAP4430_DPLL_MULT_USB_MASK BITFIELD(8, 19) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_REGM4XEN_SHIFT (1 << 11) +#define OMAP4430_DPLL_REGM4XEN_MASK BITFIELD(11, 11) + +/* Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_SD_DIV_SHIFT (1 << 24) +#define OMAP4430_DPLL_SD_DIV_MASK BITFIELD(24, 31) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_ACK_SHIFT (1 << 13) +#define OMAP4430_DPLL_SSC_ACK_MASK BITFIELD(13, 13) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT (1 << 14) +#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK BITFIELD(14, 14) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_EN_SHIFT (1 << 12) +#define OMAP4430_DPLL_SSC_EN_MASK BITFIELD(12, 12) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_DSS_DYNDEP_SHIFT (1 << 8) +#define OMAP4430_DSS_DYNDEP_MASK BITFIELD(8, 8) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP + */ +#define OMAP4430_DSS_STATDEP_SHIFT (1 << 8) +#define OMAP4430_DSS_STATDEP_MASK BITFIELD(8, 8) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_DUCATI_DYNDEP_SHIFT (1 << 0) +#define OMAP4430_DUCATI_DYNDEP_MASK BITFIELD(0, 0) + +/* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */ +#define OMAP4430_DUCATI_STATDEP_SHIFT (1 << 0) +#define OMAP4430_DUCATI_STATDEP_MASK BITFIELD(0, 0) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_FREQ_UPDATE_SHIFT (1 << 0) +#define OMAP4430_FREQ_UPDATE_MASK BITFIELD(0, 0) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_GFX_DYNDEP_SHIFT (1 << 10) +#define OMAP4430_GFX_DYNDEP_MASK BITFIELD(10, 10) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_GFX_STATDEP_SHIFT (1 << 10) +#define OMAP4430_GFX_STATDEP_MASK BITFIELD(10, 10) + +/* Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT (1 << 0) +#define OMAP4430_GPMC_FREQ_UPDATE_MASK BITFIELD(0, 0) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, + * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, + * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, + * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, + * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, + * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, + * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, + * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, + * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, + * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, + * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, + * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, + * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, + * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, + * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, + * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, + * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, + * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, + * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE, + * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, + * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL, + * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL, + * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, + * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL, + * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL, + * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, + * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL + */ +#define OMAP4430_IDLEST_SHIFT (1 << 16) +#define OMAP4430_IDLEST_MASK BITFIELD(16, 17) + +/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_ISS_DYNDEP_SHIFT (1 << 9) +#define OMAP4430_ISS_DYNDEP_MASK BITFIELD(9, 9) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_ISS_STATDEP_SHIFT (1 << 9) +#define OMAP4430_ISS_STATDEP_MASK BITFIELD(9, 9) + +/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ +#define OMAP4430_IVAHD_DYNDEP_SHIFT (1 << 2) +#define OMAP4430_IVAHD_DYNDEP_MASK BITFIELD(2, 2) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_IVAHD_STATDEP_SHIFT (1 << 2) +#define OMAP4430_IVAHD_STATDEP_MASK BITFIELD(2, 2) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_L3INIT_DYNDEP_SHIFT (1 << 7) +#define OMAP4430_L3INIT_DYNDEP_MASK BITFIELD(7, 7) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3INIT_STATDEP_SHIFT (1 << 7) +#define OMAP4430_L3INIT_STATDEP_MASK BITFIELD(7, 7) + +/* + * Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, + * CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + */ +#define OMAP4430_L3_1_DYNDEP_SHIFT (1 << 5) +#define OMAP4430_L3_1_DYNDEP_MASK BITFIELD(5, 5) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3_1_STATDEP_SHIFT (1 << 5) +#define OMAP4430_L3_1_STATDEP_MASK BITFIELD(5, 5) + +/* + * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_SDMA_DYNAMICDEP, + * CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, + * CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP + */ +#define OMAP4430_L3_2_DYNDEP_SHIFT (1 << 6) +#define OMAP4430_L3_2_DYNDEP_MASK BITFIELD(6, 6) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3_2_STATDEP_SHIFT (1 << 6) +#define OMAP4430_L3_2_STATDEP_MASK BITFIELD(6, 6) + +/* Used by CM_L3_1_DYNAMICDEP */ +#define OMAP4430_L4CFG_DYNDEP_SHIFT (1 << 12) +#define OMAP4430_L4CFG_DYNDEP_MASK BITFIELD(12, 12) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_L4CFG_STATDEP_SHIFT (1 << 12) +#define OMAP4430_L4CFG_STATDEP_MASK BITFIELD(12, 12) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_L4PER_DYNDEP_SHIFT (1 << 13) +#define OMAP4430_L4PER_DYNDEP_MASK BITFIELD(13, 13) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L4PER_STATDEP_SHIFT (1 << 13) +#define OMAP4430_L4PER_STATDEP_MASK BITFIELD(13, 13) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_L4SEC_DYNDEP_SHIFT (1 << 14) +#define OMAP4430_L4SEC_DYNDEP_MASK BITFIELD(14, 14) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP + */ +#define OMAP4430_L4SEC_STATDEP_SHIFT (1 << 14) +#define OMAP4430_L4SEC_STATDEP_MASK BITFIELD(14, 14) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_L4WKUP_DYNDEP_SHIFT (1 << 15) +#define OMAP4430_L4WKUP_DYNDEP_MASK BITFIELD(15, 15) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L4WKUP_STATDEP_SHIFT (1 << 15) +#define OMAP4430_L4WKUP_STATDEP_MASK BITFIELD(15, 15) + +/* + * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_MPU_DYNAMICDEP + */ +#define OMAP4430_MEMIF_DYNDEP_SHIFT (1 << 4) +#define OMAP4430_MEMIF_DYNDEP_MASK BITFIELD(4, 4) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_MEMIF_STATDEP_SHIFT (1 << 4) +#define OMAP4430_MEMIF_STATDEP_MASK BITFIELD(4, 4) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, + * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, + * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, + * CM_SSC_MODFREQDIV_DPLL_MPU + */ +#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT (1 << 8) +#define OMAP4430_MODFREQDIV_EXPONENT_MASK BITFIELD(8, 10) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, + * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, + * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, + * CM_SSC_MODFREQDIV_DPLL_MPU + */ +#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT (1 << 0) +#define OMAP4430_MODFREQDIV_MANTISSA_MASK BITFIELD(0, 6) + +/* + * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, + * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, + * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, + * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, + * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, + * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, + * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, + * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, + * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, + * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, + * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, + * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, + * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, + * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, + * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, + * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, + * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, + * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, + * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE, + * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, + * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL, + * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL, + * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, + * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL, + * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL, + * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, + * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL + */ +#define OMAP4430_MODULEMODE_SHIFT (1 << 0) +#define OMAP4430_MODULEMODE_MASK BITFIELD(0, 1) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_BANDGAP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_CLK32K_MASK BITFIELD(9, 9) + +/* Used by CM_CAM_ISS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK BITFIELD(8, 8) + +/* + * Used by CM_WKUP_GPIO1_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE + */ +#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DBCLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DSSCLK_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_FCLK0_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_FCLK1_MASK BITFIELD(9, 9) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_FCLK2_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT (1 << 15) +#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK BITFIELD(15, 15) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT (1 << 13) +#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK BITFIELD(13, 13) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT (1 << 14) +#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK BITFIELD(14, 14) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT (1 << 12) +#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_PHY_48M_MASK BITFIELD(8, 8) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK BITFIELD(10, 10) + +/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK BITFIELD(11, 11) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_TV_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_OTG_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_XCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_XCLK_MASK BITFIELD(8, 8) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_OVERRIDE_ENABLE_SHIFT (1 << 19) +#define OMAP4430_OVERRIDE_ENABLE_MASK BITFIELD(19, 19) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_PAD_CLKS_GATE_SHIFT (1 << 8) +#define OMAP4430_PAD_CLKS_GATE_MASK BITFIELD(8, 8) + +/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */ +#define OMAP4430_PERF_CURRENT_SHIFT (1 << 0) +#define OMAP4430_PERF_CURRENT_MASK BITFIELD(0, 7) + +/* + * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3, + * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD, + * CM_IVA_DVFS_PERF_TESLA + */ +#define OMAP4430_PERF_REQ_SHIFT (1 << 0) +#define OMAP4430_PERF_REQ_MASK BITFIELD(0, 7) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER */ +#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT (1 << 0) +#define OMAP4430_PER_DPLL_EMU_DIV_MASK BITFIELD(0, 6) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER */ +#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT (1 << 8) +#define OMAP4430_PER_DPLL_EMU_MULT_MASK BITFIELD(8, 18) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE1_COMPLETED_SHIFT (1 << 0) +#define OMAP4430_PHASE1_COMPLETED_MASK BITFIELD(0, 0) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE2A_COMPLETED_SHIFT (1 << 1) +#define OMAP4430_PHASE2A_COMPLETED_MASK BITFIELD(1, 1) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE2B_COMPLETED_SHIFT (1 << 2) +#define OMAP4430_PHASE2B_COMPLETED_MASK BITFIELD(2, 2) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT (1 << 20) +#define OMAP4430_PMD_STM_MUX_CTRL_MASK BITFIELD(20, 21) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT (1 << 22) +#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK BITFIELD(22, 23) + +/* Used by CM_DYN_DEP_PRESCAL */ +#define OMAP4430_PRESCAL_SHIFT (1 << 0) +#define OMAP4430_PRESCAL_MASK BITFIELD(0, 5) + +/* Used by REVISION_CM2, REVISION_CM1 */ +#define OMAP4430_REV_SHIFT (1 << 0) +#define OMAP4430_REV_MASK BITFIELD(0, 7) + +/* + * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE + */ +#define OMAP4430_SAR_MODE_SHIFT (1 << 4) +#define OMAP4430_SAR_MODE_MASK BITFIELD(4, 4) + +/* Used by CM_SCALE_FCLK */ +#define OMAP4430_SCALE_FCLK_SHIFT (1 << 0) +#define OMAP4430_SCALE_FCLK_MASK BITFIELD(0, 0) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_SDMA_DYNDEP_SHIFT (1 << 11) +#define OMAP4430_SDMA_DYNDEP_MASK BITFIELD(11, 11) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_SDMA_STATDEP_SHIFT (1 << 11) +#define OMAP4430_SDMA_STATDEP_MASK BITFIELD(11, 11) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT (1 << 10) +#define OMAP4430_SLIMBUS_CLK_GATE_MASK BITFIELD(10, 10) + +/* + * Used by CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, + * CM_DUCATI_DUCATI_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL, + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, + * CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL + */ +#define OMAP4430_STBYST_SHIFT (1 << 18) +#define OMAP4430_STBYST_MASK BITFIELD(18, 18) + +/* + * Used by CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB, + * CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY, + * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU + */ +#define OMAP4430_ST_DPLL_CLK_SHIFT (1 << 0) +#define OMAP4430_ST_DPLL_CLK_MASK BITFIELD(0, 0) + +/* Used by CM_CLKDCOLDO_DPLL_USB */ +#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE, + * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_ST_DPLL_CLKOUT_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKOUT_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK BITFIELD(9, 9) + +/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */ +#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT (1 << 11) +#define OMAP4430_ST_DPLL_CLKOUTX2_MASK BITFIELD(11, 11) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK BITFIELD(9, 9) + +/* Used by CM_SYS_CLKSEL */ +#define OMAP4430_SYS_CLKSEL_SHIFT (1 << 0) +#define OMAP4430_SYS_CLKSEL_MASK BITFIELD(0, 2) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_TESLA_DYNDEP_SHIFT (1 << 1) +#define OMAP4430_TESLA_DYNDEP_MASK BITFIELD(1, 1) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_TESLA_STATDEP_SHIFT (1 << 1) +#define OMAP4430_TESLA_STATDEP_MASK BITFIELD(1, 1) + +/* + * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + */ +#define OMAP4430_WINDOWSIZE_SHIFT (1 << 24) +#define OMAP4430_WINDOWSIZE_MASK BITFIELD(24, 27) +#endif diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c index 8eb2dab8c7db..58e4a1c557d8 100644 --- a/arch/arm/mach-omap2/cm.c +++ b/arch/arm/mach-omap2/cm.c @@ -21,6 +21,8 @@ #include <asm/atomic.h> +#include <plat/common.h> + #include "cm.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" @@ -61,9 +63,8 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) mask = 1 << idlest_shift; /* XXX should be OMAP2 CM */ - while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) && - (i++ < MAX_MODULE_READY_TIME)) - udelay(1); + omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena), + MAX_MODULE_READY_TIME, i); return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a2fcfcc253cc..90a4086fbdf4 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -4,8 +4,8 @@ /* * OMAP2/3 Clock Management (CM) register definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley * @@ -22,6 +22,12 @@ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) +#define OMAP44XX_CM1_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (module) + (reg)) +#define OMAP44XX_CM2_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (module) + (reg)) + +#include "cm44xx.h" /* * Architecture-specific global CM registers @@ -89,6 +95,11 @@ #define OMAP3430_CM_CLKSEL2_EMU 0x0050 #define OMAP3430_CM_CLKSEL3_EMU 0x0054 +/* CM2.CEFUSE_CM2 register offsets */ + +/* OMAP4 modulemode control */ +#define OMAP4430_MODULEMODE_HWCTRL 0 +#define OMAP4430_MODULEMODE_SWCTRL 1 /* Clock management domain register get/set */ diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h new file mode 100644 index 000000000000..c575b9b0c041 --- /dev/null +++ b/arch/arm/mach-omap2/cm44xx.h @@ -0,0 +1,358 @@ +/* + * OMAP44xx CM1 & CM2 instance offset macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM44XX_H +#define __ARCH_ARM_MACH_OMAP2_CM44XX_H + + +/* CM1 */ + + +/* CM1.OCP_SOCKET_CM1 register offsets */ +#define OMAP4430_REVISION_CM1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_CM_CM1_PROFILING_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040) + +/* CM1.CKGEN_CM1 register offsets */ +#define OMAP4430_CM_CLKSEL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_CLKSEL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_DLL_CTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010) +#define OMAP4430_CM_CLKMODE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020) +#define OMAP4430_CM_IDLEST_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024) +#define OMAP4430_CM_AUTOIDLE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028) +#define OMAP4430_CM_CLKSEL_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c) +#define OMAP4430_CM_DIV_M2_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030) +#define OMAP4430_CM_DIV_M3_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034) +#define OMAP4430_CM_DIV_M4_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038) +#define OMAP4430_CM_DIV_M5_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c) +#define OMAP4430_CM_DIV_M6_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040) +#define OMAP4430_CM_DIV_M7_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c) +#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050) +#define OMAP4430_CM_CLKMODE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060) +#define OMAP4430_CM_IDLEST_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064) +#define OMAP4430_CM_AUTOIDLE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068) +#define OMAP4430_CM_CLKSEL_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c) +#define OMAP4430_CM_DIV_M2_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c) +#define OMAP4430_CM_BYPCLK_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c) +#define OMAP4430_CM_CLKMODE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0) +#define OMAP4430_CM_IDLEST_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4) +#define OMAP4430_CM_AUTOIDLE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8) +#define OMAP4430_CM_CLKSEL_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac) +#define OMAP4430_CM_DIV_M4_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8) +#define OMAP4430_CM_DIV_M5_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc) +#define OMAP4430_CM_BYPCLK_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc) +#define OMAP4430_CM_CLKMODE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0) +#define OMAP4430_CM_IDLEST_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4) +#define OMAP4430_CM_AUTOIDLE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8) +#define OMAP4430_CM_CLKSEL_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec) +#define OMAP4430_CM_DIV_M2_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0) +#define OMAP4430_CM_DIV_M3_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c) +#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120) +#define OMAP4430_CM_IDLEST_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124) +#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128) +#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c) +#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130) +#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138) +#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c) +#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG2 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164) +#define OMAP4430_CM_DYN_DEP_PRESCAL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170) +#define OMAP4430_CM_RESTORE_ST OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180) + +/* CM1.MPU_CM1 register offsets */ +#define OMAP4430_CM_MPU_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000) +#define OMAP4430_CM_MPU_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004) +#define OMAP4430_CM_MPU_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008) +#define OMAP4430_CM_MPU_MPU_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020) + +/* CM1.TESLA_CM1 register offsets */ +#define OMAP4430_CM_TESLA_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000) +#define OMAP4430_CM_TESLA_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004) +#define OMAP4430_CM_TESLA_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008) +#define OMAP4430_CM_TESLA_TESLA_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020) + +/* CM1.ABE_CM1 register offsets */ +#define OMAP4430_CM1_ABE_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000) +#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020) +#define OMAP4430_CM1_ABE_AESS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028) +#define OMAP4430_CM1_ABE_PDM_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030) +#define OMAP4430_CM1_ABE_DMIC_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038) +#define OMAP4430_CM1_ABE_MCASP_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040) +#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048) +#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050) +#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058) +#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060) +#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068) +#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070) +#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078) +#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080) +#define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088) + +/* CM1.RESTORE_CM1 register offsets */ +#define OMAP4430_CM_CLKSEL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000) +#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004) +#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008) +#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c) +#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010) +#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014) +#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018) +#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024) +#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c) +#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030) +#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034) + +/* CM2 */ + + +/* CM2.OCP_SOCKET_CM2 register offsets */ +#define OMAP4430_REVISION_CM2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_CM_CM2_PROFILING_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040) + +/* CM2.CKGEN_CM2 register offsets */ +#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_CLKSEL_USB_60MHZ OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004) +#define OMAP4430_CM_SCALE_FCLK OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_CORE_DVFS_PERF1 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010) +#define OMAP4430_CM_CORE_DVFS_PERF2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014) +#define OMAP4430_CM_CORE_DVFS_PERF3 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018) +#define OMAP4430_CM_CORE_DVFS_PERF4 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c) +#define OMAP4430_CM_CORE_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024) +#define OMAP4430_CM_IVA_DVFS_PERF_TESLA OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028) +#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c) +#define OMAP4430_CM_IVA_DVFS_PERF_ABE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030) +#define OMAP4430_CM_IVA_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038) +#define OMAP4430_CM_CLKMODE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040) +#define OMAP4430_CM_IDLEST_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044) +#define OMAP4430_CM_AUTOIDLE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048) +#define OMAP4430_CM_CLKSEL_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c) +#define OMAP4430_CM_DIV_M2_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050) +#define OMAP4430_CM_DIV_M3_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054) +#define OMAP4430_CM_DIV_M4_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058) +#define OMAP4430_CM_DIV_M5_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c) +#define OMAP4430_CM_DIV_M6_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060) +#define OMAP4430_CM_DIV_M7_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c) +#define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070) +#define OMAP4430_CM_CLKMODE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080) +#define OMAP4430_CM_IDLEST_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084) +#define OMAP4430_CM_AUTOIDLE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088) +#define OMAP4430_CM_CLKSEL_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c) +#define OMAP4430_CM_DIV_M2_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac) +#define OMAP4430_CM_CLKDCOLDO_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4) +#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0) +#define OMAP4430_CM_IDLEST_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4) +#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8) +#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc) +#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec) + +/* CM2.ALWAYS_ON_CM2 register offsets */ +#define OMAP4430_CM_ALWON_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000) +#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020) +#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028) +#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030) +#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038) + +/* CM2.CORE_CM2 register offsets */ +#define OMAP4430_CM_L3_1_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000) +#define OMAP4430_CM_L3_1_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008) +#define OMAP4430_CM_L3_1_L3_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020) +#define OMAP4430_CM_L3_2_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100) +#define OMAP4430_CM_L3_2_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108) +#define OMAP4430_CM_L3_2_L3_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120) +#define OMAP4430_CM_L3_2_GPMC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128) +#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130) +#define OMAP4430_CM_DUCATI_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200) +#define OMAP4430_CM_DUCATI_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204) +#define OMAP4430_CM_DUCATI_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208) +#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220) +#define OMAP4430_CM_SDMA_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300) +#define OMAP4430_CM_SDMA_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304) +#define OMAP4430_CM_SDMA_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308) +#define OMAP4430_CM_SDMA_SDMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320) +#define OMAP4430_CM_MEMIF_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400) +#define OMAP4430_CM_MEMIF_DMM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420) +#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428) +#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430) +#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438) +#define OMAP4430_CM_MEMIF_DLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440) +#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450) +#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458) +#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460) +#define OMAP4430_CM_D2D_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500) +#define OMAP4430_CM_D2D_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504) +#define OMAP4430_CM_D2D_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508) +#define OMAP4430_CM_D2D_SAD2D_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520) +#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528) +#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530) +#define OMAP4430_CM_L4CFG_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600) +#define OMAP4430_CM_L4CFG_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608) +#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620) +#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628) +#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630) +#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638) +#define OMAP4430_CM_L3INSTR_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700) +#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720) +#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728) +#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740) + +/* CM2.IVAHD_CM2 register offsets */ +#define OMAP4430_CM_IVAHD_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000) +#define OMAP4430_CM_IVAHD_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004) +#define OMAP4430_CM_IVAHD_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008) +#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020) +#define OMAP4430_CM_IVAHD_SL2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028) + +/* CM2.CAM_CM2 register offsets */ +#define OMAP4430_CM_CAM_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000) +#define OMAP4430_CM_CAM_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004) +#define OMAP4430_CM_CAM_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008) +#define OMAP4430_CM_CAM_ISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020) +#define OMAP4430_CM_CAM_FDIF_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028) + +/* CM2.DSS_CM2 register offsets */ +#define OMAP4430_CM_DSS_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000) +#define OMAP4430_CM_DSS_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004) +#define OMAP4430_CM_DSS_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008) +#define OMAP4430_CM_DSS_DSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020) +#define OMAP4430_CM_DSS_DEISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028) + +/* CM2.GFX_CM2 register offsets */ +#define OMAP4430_CM_GFX_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000) +#define OMAP4430_CM_GFX_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004) +#define OMAP4430_CM_GFX_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008) +#define OMAP4430_CM_GFX_GFX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020) + +/* CM2.L3INIT_CM2 register offsets */ +#define OMAP4430_CM_L3INIT_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000) +#define OMAP4430_CM_L3INIT_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004) +#define OMAP4430_CM_L3INIT_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008) +#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028) +#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030) +#define OMAP4430_CM_L3INIT_HSI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038) +#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040) +#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058) +#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060) +#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068) +#define OMAP4430_CM_L3INIT_P1500_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078) +#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080) +#define OMAP4430_CM_L3INIT_SATA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088) +#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090) +#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098) +#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8) +#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0) +#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8) +#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0) +#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0) + +/* CM2.L4PER_CM2 register offsets */ +#define OMAP4430_CM_L4PER_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000) +#define OMAP4430_CM_L4PER_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008) +#define OMAP4430_CM_L4PER_ADC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020) +#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028) +#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030) +#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038) +#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040) +#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048) +#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050) +#define OMAP4430_CM_L4PER_ELM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058) +#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060) +#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068) +#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070) +#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078) +#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080) +#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088) +#define OMAP4430_CM_L4PER_HECC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090) +#define OMAP4430_CM_L4PER_HECC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098) +#define OMAP4430_CM_L4PER_I2C1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0) +#define OMAP4430_CM_L4PER_I2C2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8) +#define OMAP4430_CM_L4PER_I2C3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0) +#define OMAP4430_CM_L4PER_I2C4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8) +#define OMAP4430_CM_L4PER_L4PER_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0) +#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0) +#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8) +#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0) +#define OMAP4430_CM_L4PER_MGATE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8) +#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0) +#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8) +#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100) +#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108) +#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120) +#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128) +#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130) +#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138) +#define OMAP4430_CM_L4PER_UART1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140) +#define OMAP4430_CM_L4PER_UART2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148) +#define OMAP4430_CM_L4PER_UART3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150) +#define OMAP4430_CM_L4PER_UART4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158) +#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160) +#define OMAP4430_CM_L4PER_I2C5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168) +#define OMAP4430_CM_L4SEC_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180) +#define OMAP4430_CM_L4SEC_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184) +#define OMAP4430_CM_L4SEC_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188) +#define OMAP4430_CM_L4SEC_AES1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0) +#define OMAP4430_CM_L4SEC_AES2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8) +#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0) +#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8) +#define OMAP4430_CM_L4SEC_RNG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0) +#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8) +#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8) + +/* CM2.CEFUSE_CM2 register offsets */ +#define OMAP4430_CM_CEFUSE_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000) +#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020) + +/* CM2.RESTORE_CM2 register offsets */ +#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000) +#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004) +#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008) +#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c) +#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010) +#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014) +#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018) +#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c) +#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020) +#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024) +#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028) +#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c) +#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030) +#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034) +#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038) +#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c) +#define OMAP4430_CM_SDMA_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040) +#endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 733d3dcff98b..18ad93160abb 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -27,6 +27,8 @@ #include <mach/gpio.h> #include <plat/mmc.h> +#include "mux.h" + #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) static struct resource cam_resources[] = { @@ -595,27 +597,40 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, if (cpu_is_omap34xx()) { if (controller_nr == 0) { - omap_cfg_reg(N28_3430_MMC1_CLK); - omap_cfg_reg(M27_3430_MMC1_CMD); - omap_cfg_reg(N27_3430_MMC1_DAT0); + omap_mux_init_signal("sdmmc1_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat0", + OMAP_PIN_INPUT_PULLUP); if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(N26_3430_MMC1_DAT1); - omap_cfg_reg(N25_3430_MMC1_DAT2); - omap_cfg_reg(P28_3430_MMC1_DAT3); + omap_mux_init_signal("sdmmc1_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(P27_3430_MMC1_DAT4); - omap_cfg_reg(P26_3430_MMC1_DAT5); - omap_cfg_reg(R27_3430_MMC1_DAT6); - omap_cfg_reg(R25_3430_MMC1_DAT7); + omap_mux_init_signal("sdmmc1_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat7", + OMAP_PIN_INPUT_PULLUP); } } if (controller_nr == 1) { /* MMC2 */ - omap_cfg_reg(AE2_3430_MMC2_CLK); - omap_cfg_reg(AG5_3430_MMC2_CMD); - omap_cfg_reg(AH5_3430_MMC2_DAT0); + omap_mux_init_signal("sdmmc2_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat0", + OMAP_PIN_INPUT_PULLUP); /* * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed @@ -623,15 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, */ if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AH4_3430_MMC2_DAT1); - omap_cfg_reg(AG4_3430_MMC2_DAT2); - omap_cfg_reg(AF4_3430_MMC2_DAT3); + omap_mux_init_signal("sdmmc2_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AE4_3430_MMC2_DAT4); - omap_cfg_reg(AH3_3430_MMC2_DAT5); - omap_cfg_reg(AF3_3430_MMC2_DAT6); - omap_cfg_reg(AE3_3430_MMC2_DAT7); + omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", + OMAP_PIN_INPUT_PULLUP); } } diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c new file mode 100644 index 000000000000..f6055b493294 --- /dev/null +++ b/arch/arm/mach-omap2/dpll.c @@ -0,0 +1,538 @@ +/* + * OMAP3/4 - specific DPLL control functions + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Written by Paul Walmsley + * Testing and integration fixes by Jouni Högander + * + * Parts of this code are based on code written by + * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/limits.h> +#include <linux/bitops.h> + +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <asm/div64.h> +#include <asm/clkdev.h> + +#include "clock.h" +#include "prm.h" +#include "prm-regbits-34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" + +/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ +#define DPLL_AUTOIDLE_DISABLE 0x0 +#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 + +#define MAX_DPLL_WAIT_TRIES 1000000 + + +/** + * omap3_dpll_recalc - recalculate DPLL rate + * @clk: DPLL struct clk + * + * Recalculate and propagate the DPLL rate. + */ +unsigned long omap3_dpll_recalc(struct clk *clk) +{ + return omap2_get_dpll_rate(clk); +} + +/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ +static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits) +{ + const struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + v = __raw_readl(dd->control_reg); + v &= ~dd->enable_mask; + v |= clken_bits << __ffs(dd->enable_mask); + __raw_writel(v, dd->control_reg); +} + +/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ +static int _omap3_wait_dpll_status(struct clk *clk, u8 state) +{ + const struct dpll_data *dd; + int i = 0; + int ret = -EINVAL; + + dd = clk->dpll_data; + + state <<= __ffs(dd->idlest_mask); + + while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) && + i < MAX_DPLL_WAIT_TRIES) { + i++; + udelay(1); + } + + if (i == MAX_DPLL_WAIT_TRIES) { + printk(KERN_ERR "clock: %s failed transition to '%s'\n", + clk->name, (state) ? "locked" : "bypassed"); + } else { + pr_debug("clock: %s transition to '%s' in %d loops\n", + clk->name, (state) ? "locked" : "bypassed", i); + + ret = 0; + } + + return ret; +} + +/* From 3430 TRM ES2 4.7.6.2 */ +static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) +{ + unsigned long fint; + u16 f = 0; + + fint = clk->dpll_data->clk_ref->rate / n; + + pr_debug("clock: fint is %lu\n", fint); + + if (fint >= 750000 && fint <= 1000000) + f = 0x3; + else if (fint > 1000000 && fint <= 1250000) + f = 0x4; + else if (fint > 1250000 && fint <= 1500000) + f = 0x5; + else if (fint > 1500000 && fint <= 1750000) + f = 0x6; + else if (fint > 1750000 && fint <= 2100000) + f = 0x7; + else if (fint > 7500000 && fint <= 10000000) + f = 0xB; + else if (fint > 10000000 && fint <= 12500000) + f = 0xC; + else if (fint > 12500000 && fint <= 15000000) + f = 0xD; + else if (fint > 15000000 && fint <= 17500000) + f = 0xE; + else if (fint > 17500000 && fint <= 21000000) + f = 0xF; + else + pr_debug("clock: unknown freqsel setting for %d\n", n); + + return f; +} + +/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ + +/* + * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report + * readiness before returning. Will save and restore the DPLL's + * autoidle state across the enable, per the CDP code. If the DPLL + * locked successfully, return 0; if the DPLL did not lock in the time + * allotted, or DPLL3 was passed in, return -EINVAL. + */ +static int _omap3_noncore_dpll_lock(struct clk *clk) +{ + u8 ai; + int r; + + pr_debug("clock: locking DPLL %s\n", clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + omap3_dpll_deny_idle(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOCKED); + + r = _omap3_wait_dpll_status(clk, 1); + + if (ai) + omap3_dpll_allow_idle(clk); + + return r; +} + +/* + * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power bypass mode. In + * bypass mode, the DPLL's rate is set equal to its parent clock's + * rate. Waits for the DPLL to report readiness before returning. + * Will save and restore the DPLL's autoidle state across the enable, + * per the CDP code. If the DPLL entered bypass mode successfully, + * return 0; if the DPLL did not enter bypass in the time allotted, or + * DPLL3 was passed in, or the DPLL does not support low-power bypass, + * return -EINVAL. + */ +static int _omap3_noncore_dpll_bypass(struct clk *clk) +{ + int r; + u8 ai; + + if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) + return -EINVAL; + + pr_debug("clock: configuring DPLL %s for low-power bypass\n", + clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); + + r = _omap3_wait_dpll_status(clk, 0); + + if (ai) + omap3_dpll_allow_idle(clk); + else + omap3_dpll_deny_idle(clk); + + return r; +} + +/* + * _omap3_noncore_dpll_stop - instruct a DPLL to stop + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power stop. Will save and + * restore the DPLL's autoidle state across the stop, per the CDP + * code. If DPLL3 was passed in, or the DPLL does not support + * low-power stop, return -EINVAL; otherwise, return 0. + */ +static int _omap3_noncore_dpll_stop(struct clk *clk) +{ + u8 ai; + + if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) + return -EINVAL; + + pr_debug("clock: stopping DPLL %s\n", clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); + + if (ai) + omap3_dpll_allow_idle(clk); + else + omap3_dpll_deny_idle(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. + * The choice of modes depends on the DPLL's programmed rate: if it is + * the same as the DPLL's parent clock, it will enter bypass; + * otherwise, it will enter lock. This code will wait for the DPLL to + * indicate readiness before returning, unless the DPLL takes too long + * to enter the target state. Intended to be used as the struct clk's + * enable function. If DPLL3 was passed in, or the DPLL does not + * support low-power stop, or if the DPLL took too long to enter + * bypass or lock, return -EINVAL; otherwise, return 0. + */ +int omap3_noncore_dpll_enable(struct clk *clk) +{ + int r; + struct dpll_data *dd; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (clk->rate == dd->clk_bypass->rate) { + WARN_ON(clk->parent != dd->clk_bypass); + r = _omap3_noncore_dpll_bypass(clk); + } else { + WARN_ON(clk->parent != dd->clk_ref); + r = _omap3_noncore_dpll_lock(clk); + } + /* + *FIXME: this is dubious - if clk->rate has changed, what about + * propagating? + */ + if (!r) + clk->rate = omap2_get_dpll_rate(clk); + + return r; +} + +/** + * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power stop. This function is + * intended for use in struct clkops. No return value. + */ +void omap3_noncore_dpll_disable(struct clk *clk) +{ + _omap3_noncore_dpll_stop(clk); +} + + +/* Non-CORE DPLL rate set code */ + +/* + * omap3_noncore_dpll_program - set non-core DPLL M,N values directly + * @clk: struct clk * of DPLL to set + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * @freqsel: FREQSEL value to set + * + * Program the DPLL with the supplied M, N values, and wait for the DPLL to + * lock.. Returns -EINVAL upon error, or 0 upon success. + */ +int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) +{ + struct dpll_data *dd = clk->dpll_data; + u32 v; + + /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ + _omap3_noncore_dpll_bypass(clk); + + /* Set jitter correction */ + if (!cpu_is_omap44xx()) { + v = __raw_readl(dd->control_reg); + v &= ~dd->freqsel_mask; + v |= freqsel << __ffs(dd->freqsel_mask); + __raw_writel(v, dd->control_reg); + } + + /* Set DPLL multiplier, divider */ + v = __raw_readl(dd->mult_div1_reg); + v &= ~(dd->mult_mask | dd->div1_mask); + v |= m << __ffs(dd->mult_mask); + v |= (n - 1) << __ffs(dd->div1_mask); + __raw_writel(v, dd->mult_div1_reg); + + /* We let the clock framework set the other output dividers later */ + + /* REVISIT: Set ramp-up delay? */ + + _omap3_noncore_dpll_lock(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_set_rate - set non-core DPLL rate + * @clk: struct clk * of DPLL to set + * @rate: rounded target rate + * + * Set the DPLL CLKOUT to the target rate. If the DPLL can enter + * low-power bypass, and the target rate is the bypass source clock + * rate, then configure the DPLL for bypass. Otherwise, round the + * target rate if it hasn't been done already, then program and lock + * the DPLL. Returns -EINVAL upon error, or 0 upon success. + */ +int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *new_parent = NULL; + u16 freqsel = 0; + struct dpll_data *dd; + int ret; + + if (!clk || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (rate == omap2_get_dpll_rate(clk)) + return 0; + + /* + * Ensure both the bypass and ref clocks are enabled prior to + * doing anything; we need the bypass clock running to reprogram + * the DPLL. + */ + omap2_clk_enable(dd->clk_bypass); + omap2_clk_enable(dd->clk_ref); + + if (dd->clk_bypass->rate == rate && + (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); + + ret = _omap3_noncore_dpll_bypass(clk); + if (!ret) + new_parent = dd->clk_bypass; + } else { + if (dd->last_rounded_rate != rate) + omap2_dpll_round_rate(clk, rate); + + if (dd->last_rounded_rate == 0) + return -EINVAL; + + /* No freqsel on OMAP4 */ + if (!cpu_is_omap44xx()) { + freqsel = _omap3_dpll_compute_freqsel(clk, + dd->last_rounded_n); + if (!freqsel) + WARN_ON(1); + } + + pr_debug("clock: %s: set rate: locking rate to %lu.\n", + clk->name, rate); + + ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, + dd->last_rounded_n, freqsel); + if (!ret) + new_parent = dd->clk_ref; + } + if (!ret) { + /* + * Switch the parent clock in the heirarchy, and make sure + * that the new parent's usecount is correct. Note: we + * enable the new parent before disabling the old to avoid + * any unnecessary hardware disable->enable transitions. + */ + if (clk->usecount) { + omap2_clk_enable(new_parent); + omap2_clk_disable(clk->parent); + } + clk_reparent(clk, new_parent); + clk->rate = rate; + } + omap2_clk_disable(dd->clk_ref); + omap2_clk_disable(dd->clk_bypass); + + return 0; +} + +/* DPLL autoidle read/set code */ + +/** + * omap3_dpll_autoidle_read - read a DPLL's autoidle bits + * @clk: struct clk * of the DPLL to read + * + * Return the DPLL's autoidle bits, shifted down to bit 0. Returns + * -EINVAL if passed a null pointer or if the struct clk does not + * appear to refer to a DPLL. + */ +u32 omap3_dpll_autoidle_read(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return -EINVAL; + + dd = clk->dpll_data; + + v = __raw_readl(dd->autoidle_reg); + v &= dd->autoidle_mask; + v >>= __ffs(dd->autoidle_mask); + + return v; +} + +/** + * omap3_dpll_allow_idle - enable DPLL autoidle bits + * @clk: struct clk * of the DPLL to operate on + * + * Enable DPLL automatic idle control. This automatic idle mode + * switching takes effect only when the DPLL is locked, at least on + * OMAP3430. The DPLL will enter low-power stop when its downstream + * clocks are gated. No return value. + */ +void omap3_dpll_allow_idle(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return; + + dd = clk->dpll_data; + + /* + * REVISIT: CORE DPLL can optionally enter low-power bypass + * by writing 0x5 instead of 0x1. Add some mechanism to + * optionally enter this mode. + */ + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); +} + +/** + * omap3_dpll_deny_idle - prevent DPLL from automatically idling + * @clk: struct clk * of the DPLL to operate on + * + * Disable DPLL automatic idle control. No return value. + */ +void omap3_dpll_deny_idle(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return; + + dd = clk->dpll_data; + + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); + +} + +/* Clock control for DPLL outputs */ + +/** + * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate + * @clk: DPLL output struct clk + * + * Using parent clock DPLL data, look up DPLL state. If locked, set our + * rate to the dpll_clk * 2; otherwise, just use dpll_clk. + */ +unsigned long omap3_clkoutx2_recalc(struct clk *clk) +{ + const struct dpll_data *dd; + unsigned long rate; + u32 v; + struct clk *pclk; + + /* Walk up the parents of clk, looking for a DPLL */ + pclk = clk->parent; + while (pclk && !pclk->dpll_data) + pclk = pclk->parent; + + /* clk does not have a DPLL as a parent? */ + WARN_ON(!pclk); + + dd = pclk->dpll_data; + + WARN_ON(!dd->enable_mask); + + v = __raw_readl(dd->control_reg) & dd->enable_mask; + v >>= __ffs(dd->enable_mask); + if (v != OMAP3XXX_EN_DPLL_LOCKED) + rate = clk->parent->rate; + else + rate = clk->parent->rate * 2; + return rate; +} diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 6083e21b3be6..877c6f5807b7 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -33,17 +33,19 @@ static struct resource gpmc_smc91x_resources[] = { }; static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, }; static struct platform_device gpmc_smc91x_device = { .name = "smc91x", .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, .dev = { .platform_data = &gpmc_smc91x_info, }, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, }; /* diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e86f5ca180ea..bd8cb5974726 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -517,7 +517,7 @@ void __init gpmc_init(void) ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; } else if (cpu_is_omap44xx()) { - ck = "gpmc_fck"; + ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; } diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c new file mode 100644 index 000000000000..789ca8c02f0c --- /dev/null +++ b/arch/arm/mach-omap2/i2c.c @@ -0,0 +1,56 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/cpu.h> +#include <plat/i2c.h> +#include <plat/mux.h> + +#include "mux.h" + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap24xx()) { + const int omap24xx_pins[][2] = { + { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, + { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, + }; + int scl, sda; + + scl = omap24xx_pins[bus_id - 1][0]; + sda = omap24xx_pins[bus_id - 1][1]; + omap_cfg_reg(sda); + omap_cfg_reg(scl); + } + + /* First I2C bus is not muxable */ + if (cpu_is_omap34xx() && bus_id > 1) { + char mux_name[sizeof("i2c2_scl.i2c2_scl")]; + + sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f48a4b2654dd..a091b53657b9 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -246,6 +246,31 @@ void __init omap3_check_revision(void) } } +void __init omap4_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + char *rev_name = "ES1.0"; + + /* + * The IC rev detection is done with hawkeye and rev. + * Note that rev does not map directly to defined processor + * revision numbers as ES1.0 uses value 0. + */ + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + + if ((hawkeye == 0xb852) && (rev == 0x0)) { + omap_revision = OMAP4430_REV_ES1_0; + pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); + return; + } + + pr_err("Unknown OMAP4 CPU id\n"); +} + #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ printk(#feat" "); @@ -277,10 +302,10 @@ void __init omap3_cpuinfo(void) } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ strcpy(cpu_name, "OMAP3430/3530"); - } else if (omap3_has_sgx()) { + } else if (omap3_has_iva()) { omap_revision = OMAP3525_REV(rev); strcpy(cpu_name, "OMAP3525"); - } else if (omap3_has_iva()) { + } else if (omap3_has_sgx()) { omap_revision = OMAP3515_REV(rev); strcpy(cpu_name, "OMAP3515"); } else { @@ -336,7 +361,7 @@ void __init omap2_check_revision(void) omap3_check_features(); omap3_cpuinfo(); } else if (cpu_is_omap44xx()) { - printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + omap4_check_revision(); return; } else { pr_err("OMAP revision unknown, please fix!\n"); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 59d28b2fd8c5..a8749e8017b9 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -22,19 +22,20 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/omapfb.h> #include <asm/tlb.h> #include <asm/mach/map.h> #include <plat/mux.h> -#include <plat/omapfb.h> #include <plat/sram.h> #include <plat/sdrc.h> #include <plat/gpmc.h> #include <plat/serial.h> +#include <plat/mux.h> +#include <plat/vram.h> -#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" #include <plat/omap-pm.h> @@ -43,7 +44,6 @@ #include <plat/clockdomain.h> #include "clockdomains.h" -#endif #include <plat/omap_hwmod.h> #include "omap_hwmod_2420.h" #include "omap_hwmod_2430.h" @@ -264,6 +264,7 @@ void __init omap2_map_common_io(void) omap2_check_revision(); omap_sram_init(); omapfb_reserve_sdram(); + omap_vram_reserve_sdram(); } /* @@ -319,8 +320,8 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); - omap2_clk_init(); #endif + omap2_clk_init(); omap_serial_early_init(); #ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c18a94eca641..e071b3fd1878 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -27,19 +27,52 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/ctype.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> #include <asm/system.h> #include <plat/control.h> #include <plat/mux.h> -#ifdef CONFIG_OMAP_MUX +#include "mux.h" + +#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ +#define OMAP_MUX_BASE_SZ 0x5ca + +struct omap_mux_entry { + struct omap_mux mux; + struct list_head node; +}; + +static unsigned long mux_phys; +static void __iomem *mux_base; + +static inline u16 omap_mux_read(u16 reg) +{ + if (cpu_is_omap24xx()) + return __raw_readb(mux_base + reg); + else + return __raw_readw(mux_base + reg); +} + +static inline void omap_mux_write(u16 val, u16 reg) +{ + if (cpu_is_omap24xx()) + __raw_writeb(val, mux_base + reg); + else + __raw_writew(val, mux_base + reg); +} + +#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX) static struct omap_mux_cfg arch_mux_cfg; /* NOTE: See mux.h for the enumeration */ -#ifdef CONFIG_ARCH_OMAP24XX static struct pin_config __initdata_or_module omap24xx_pins[] = { /* * description mux mux pull pull debug @@ -249,342 +282,14 @@ MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1) #define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins) -#else -#define omap24xx_pins NULL -#define OMAP24XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP24XX */ - -#ifdef CONFIG_ARCH_OMAP34XX -static struct pin_config __initdata_or_module omap34xx_pins[] = { -/* - * Name, reg-offset, - * mux-mode | [active-mode | off-mode] - */ - -/* 34xx I2C */ -MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 3*/ -MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ -MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) - - -/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix. - * (Always specify PIN_INPUT, except for names suffixed by "_OUT".) - * No internal pullup/pulldown without "_UP" or "_DOWN" suffix. - */ -MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) - -/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ -MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) - -/* MMC1 */ -MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC2 */ -MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC3 */ -MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) - -/* SYS_NIRQ T2 INT1 */ -MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0, - OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP | - OMAP34XX_MUX_MODE0) -/* EHCI GPIO's on OMAP3EVM (Rev >= E) */ -MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -}; - -#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) - -#else -#define omap34xx_pins NULL -#define OMAP34XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP34XX */ - #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) { u16 orig; u8 warn = 0, debug = 0; - if (cpu_is_omap24xx()) - orig = omap_ctrl_readb(cfg->mux_reg); - else - orig = omap_ctrl_readw(cfg->mux_reg); + orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET); #ifdef CONFIG_OMAP_MUX_DEBUG debug = cfg->debug; @@ -600,7 +305,6 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r #define omap2_cfg_debug(x, y) do {} while (0) #endif -#ifdef CONFIG_ARCH_OMAP24XX static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) { static DEFINE_SPINLOCK(mux_spin_lock); @@ -614,47 +318,692 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) if (cfg->pu_pd_val) reg |= OMAP2_PULL_UP; omap2_cfg_debug(cfg, reg); - omap_ctrl_writeb(reg, cfg->mux_reg); + omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); spin_unlock_irqrestore(&mux_spin_lock, flags); return 0; } + +int __init omap2_mux_init(void) +{ + u32 mux_pbase; + + if (cpu_is_omap2420()) + mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else if (cpu_is_omap2430()) + mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else + return -ENODEV; + + mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + + if (cpu_is_omap24xx()) { + arch_mux_cfg.pins = omap24xx_pins; + arch_mux_cfg.size = OMAP24XX_PINS_SZ; + arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; + + return omap_mux_register(&arch_mux_cfg); + } + + return 0; +} + #else -#define omap24xx_cfg_reg NULL -#endif +int __init omap2_mux_init(void) +{ + return 0; +} +#endif /* CONFIG_OMAP_MUX */ + +/*----------------------------------------------------------------------------*/ #ifdef CONFIG_ARCH_OMAP34XX -static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) +static LIST_HEAD(muxmodes); +static DEFINE_MUTEX(muxmode_mutex); + +#ifdef CONFIG_OMAP_MUX + +static char *omap_mux_options; + +int __init omap_mux_init_gpio(int gpio, int val) { - static DEFINE_SPINLOCK(mux_spin_lock); - unsigned long flags; - u16 reg = 0; + struct omap_mux_entry *e; + int found = 0; + + if (!gpio) + return -EINVAL; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (gpio == m->gpio) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); + mux_mode |= OMAP_MUX_MODE4; + printk(KERN_DEBUG "mux: Setting signal " + "%s.gpio%i 0x%04x -> 0x%04x\n", + m->muxnames[0], gpio, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } - spin_lock_irqsave(&mux_spin_lock, flags); - reg |= cfg->mux_val; - omap2_cfg_debug(cfg, reg); - omap_ctrl_writew(reg, cfg->mux_reg); - spin_unlock_irqrestore(&mux_spin_lock, flags); + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + + return -ENODEV; +} + +int __init omap_mux_init_signal(char *muxname, int val) +{ + struct omap_mux_entry *e; + char *m0_name = NULL, *mode_name = NULL; + int found = 0; + + mode_name = strchr(muxname, '.'); + if (mode_name) { + *mode_name = '\0'; + mode_name++; + m0_name = muxname; + } else { + mode_name = muxname; + } + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char *m0_entry = m->muxnames[0]; + int i; + + if (m0_name && strcmp(m0_name, m0_entry)) + continue; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + char *mode_cur = m->muxnames[i]; + + if (!mode_cur) + continue; + + if (!strcmp(mode_name, mode_cur)) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val | i; + printk(KERN_DEBUG "mux: Setting signal " + "%s.%s 0x%04x -> 0x%04x\n", + m0_entry, muxname, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } + } + + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n", + found, muxname); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set signal %s\n", muxname); + + return -ENODEV; +} + +#ifdef CONFIG_DEBUG_FS + +#define OMAP_MUX_MAX_NR_FLAGS 10 +#define OMAP_MUX_TEST_FLAG(val, mask) \ + if (((val) & (mask)) == (mask)) { \ + i++; \ + flags[i] = #mask; \ + } + +/* REVISIT: Add checking for non-optimal mux settings */ +static inline void omap_mux_decode(struct seq_file *s, u16 val) +{ + char *flags[OMAP_MUX_MAX_NR_FLAGS]; + char mode[14]; + int i = -1; + + sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); + i++; + flags[i] = mode; + + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE); + if (val & OMAP_OFF_EN) { + if (!(val & OMAP_OFFOUT_EN)) { + if (!(val & OMAP_OFF_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLUP); + } + } else { + if (!(val & OMAP_OFFOUT_VAL)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_LOW); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_HIGH); + } + } + } + + if (val & OMAP_INPUT_EN) { + if (val & OMAP_PULL_ENA) { + if (!(val & OMAP_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP); + } + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT); + } + } else { + i++; + flags[i] = "OMAP_PIN_OUTPUT"; + } + + do { + seq_printf(s, "%s", flags[i]); + if (i > 0) + seq_printf(s, " | "); + } while (i-- > 0); +} + +#define OMAP_MUX_DEFNAME_LEN 16 + +static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) +{ + struct omap_mux_entry *e; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char m0_def[OMAP_MUX_DEFNAME_LEN]; + char *m0_name = m->muxnames[0]; + u16 val; + int i, mode; + + if (!m0_name) + continue; + + for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { + if (m0_name[i] == '\0') { + m0_def[i] = m0_name[i]; + break; + } + m0_def[i] = toupper(m0_name[i]); + } + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "OMAP%i_MUX(%s, ", + cpu_is_omap34xx() ? 3 : 0, m0_def); + omap_mux_decode(s, val); + seq_printf(s, "),\n"); + } + + return 0; +} + +static int omap_mux_dbg_board_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_board_show, &inode->i_private); +} + +static const struct file_operations omap_mux_dbg_board_fops = { + .open = omap_mux_dbg_board_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused) +{ + struct omap_mux *m = s->private; + const char *none = "NA"; + u16 val; + int mode; + + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n", + m->muxnames[0], m->muxnames[mode], + mux_phys + m->reg_offset, m->reg_offset, val, + m->balls[0] ? m->balls[0] : none, + m->balls[1] ? m->balls[1] : none); + seq_printf(s, "mode: "); + omap_mux_decode(s, val); + seq_printf(s, "\n"); + seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n", + m->muxnames[0] ? m->muxnames[0] : none, + m->muxnames[1] ? m->muxnames[1] : none, + m->muxnames[2] ? m->muxnames[2] : none, + m->muxnames[3] ? m->muxnames[3] : none, + m->muxnames[4] ? m->muxnames[4] : none, + m->muxnames[5] ? m->muxnames[5] : none, + m->muxnames[6] ? m->muxnames[6] : none, + m->muxnames[7] ? m->muxnames[7] : none); return 0; } + +#define OMAP_MUX_MAX_ARG_CHAR 7 + +static ssize_t omap_mux_dbg_signal_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + char buf[OMAP_MUX_MAX_ARG_CHAR]; + struct seq_file *seqf; + struct omap_mux *m; + unsigned long val; + int buf_size, ret; + + if (count > OMAP_MUX_MAX_ARG_CHAR) + return -EINVAL; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + ret = strict_strtoul(buf, 0x10, &val); + if (ret < 0) + return ret; + + if (val > 0xffff) + return -EINVAL; + + seqf = file->private_data; + m = seqf->private; + + omap_mux_write((u16)val, m->reg_offset); + *ppos += count; + + return count; +} + +static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_signal_show, inode->i_private); +} + +static const struct file_operations omap_mux_dbg_signal_fops = { + .open = omap_mux_dbg_signal_open, + .read = seq_read, + .write = omap_mux_dbg_signal_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *mux_dbg_dir; + +static void __init omap_mux_dbg_init(void) +{ + struct omap_mux_entry *e; + + mux_dbg_dir = debugfs_create_dir("omap_mux", NULL); + if (!mux_dbg_dir) + return; + + (void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir, + NULL, &omap_mux_dbg_board_fops); + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + + (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, + m, &omap_mux_dbg_signal_fops); + } +} + #else -#define omap34xx_cfg_reg NULL +static inline void omap_mux_dbg_init(void) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void __init omap_mux_free_names(struct omap_mux *m) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) + kfree(m->muxnames[i]); + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) + kfree(m->balls[i]); #endif -int __init omap2_mux_init(void) +} + +/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */ +static int __init omap_mux_late_init(void) { - if (cpu_is_omap24xx()) { - arch_mux_cfg.pins = omap24xx_pins; - arch_mux_cfg.size = OMAP24XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; - } else if (cpu_is_omap34xx()) { - arch_mux_cfg.pins = omap34xx_pins; - arch_mux_cfg.size = OMAP34XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap34xx_cfg_reg; + struct omap_mux_entry *e, *tmp; + + list_for_each_entry_safe(e, tmp, &muxmodes, node) { + struct omap_mux *m = &e->mux; + u16 mode = omap_mux_read(m->reg_offset); + + if (OMAP_MODE_GPIO(mode)) + continue; + +#ifndef CONFIG_DEBUG_FS + mutex_lock(&muxmode_mutex); + list_del(&e->node); + mutex_unlock(&muxmode_mutex); + omap_mux_free_names(m); + kfree(m); +#endif + + } + + omap_mux_dbg_init(); + + return 0; +} +late_initcall(omap_mux_late_init); + +static void __init omap_mux_package_fixup(struct omap_mux *p, + struct omap_mux *superset) +{ + while (p->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == p->reg_offset) { + *s = *p; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown entry offset 0x%x\n", + p->reg_offset); + p++; + } +} + +#ifdef CONFIG_DEBUG_FS + +static void __init omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ + while (b->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == b->reg_offset) { + s->balls[0] = b->balls[0]; + s->balls[1] = b->balls[1]; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown ball offset 0x%x\n", + b->reg_offset); + b++; + } +} + +#else /* CONFIG_DEBUG_FS */ + +static inline void omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ +} + +#endif /* CONFIG_DEBUG_FS */ + +static int __init omap_mux_setup(char *options) +{ + if (!options) + return 0; + + omap_mux_options = options; + + return 1; +} +__setup("omap_mux=", omap_mux_setup); + +/* + * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234 + * cmdline options only override the bootloader values. + * During development, please enable CONFIG_DEBUG_FS, and use the + * signal specific entries under debugfs. + */ +static void __init omap_mux_set_cmdline_signals(void) +{ + char *options, *next_opt, *token; + + if (!omap_mux_options) + return; + + options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + if (!options) + return; + + strcpy(options, omap_mux_options); + next_opt = options; + + while ((token = strsep(&next_opt, ",")) != NULL) { + char *keyval, *name; + unsigned long val; + + keyval = token; + name = strsep(&keyval, "="); + if (name) { + int res; + + res = strict_strtoul(keyval, 0x10, &val); + if (res < 0) + continue; + + omap_mux_init_signal(name, (u16)val); + } + } + + kfree(options); +} + +static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux) +{ + while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { + omap_mux_write(board_mux->value, board_mux->reg_offset); + board_mux++; + } +} + +static int __init omap_mux_copy_names(struct omap_mux *src, + struct omap_mux *dst) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + if (src->muxnames[i]) { + dst->muxnames[i] = + kmalloc(strlen(src->muxnames[i]) + 1, + GFP_KERNEL); + if (!dst->muxnames[i]) + goto free; + strcpy(dst->muxnames[i], src->muxnames[i]); + } + } + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { + if (src->balls[i]) { + dst->balls[i] = + kmalloc(strlen(src->balls[i]) + 1, + GFP_KERNEL); + if (!dst->balls[i]) + goto free; + strcpy(dst->balls[i], src->balls[i]); + } + } +#endif + + return 0; + +free: + omap_mux_free_names(dst); + return -ENOMEM; + +} + +#endif /* CONFIG_OMAP_MUX */ + +static u16 omap_mux_get_by_gpio(int gpio) +{ + struct omap_mux_entry *e; + u16 offset = OMAP_MUX_TERMINATOR; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (m->gpio == gpio) { + offset = m->reg_offset; + break; + } + } + + return offset; +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +u16 omap_mux_get_gpio(int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not get gpio%i\n", gpio); + return offset; + } + + return omap_mux_read(offset); +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +void omap_mux_set_gpio(u16 val, int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + return; + } + + omap_mux_write(val, offset); +} + +static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src) +{ + struct omap_mux_entry *entry; + struct omap_mux *m; + + entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL); + if (!entry) + return NULL; + + m = &entry->mux; + memcpy(m, src, sizeof(struct omap_mux_entry)); + +#ifdef CONFIG_OMAP_MUX + if (omap_mux_copy_names(src, m)) { + kfree(entry); + return NULL; } +#endif + + mutex_lock(&muxmode_mutex); + list_add_tail(&entry->node, &muxmodes); + mutex_unlock(&muxmode_mutex); - return omap_mux_register(&arch_mux_cfg); + return m; } +/* + * Note if CONFIG_OMAP_MUX is not selected, we will only initialize + * the GPIO to mux offset mapping that is needed for dynamic muxing + * of GPIO pins for off-idle. + */ +static void __init omap_mux_init_list(struct omap_mux *superset) +{ + while (superset->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *entry; + +#ifndef CONFIG_OMAP_MUX + /* Skip pins that are not muxed as GPIO by bootloader */ + if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { + superset++; + continue; + } #endif + + entry = omap_mux_list_add(superset); + if (!entry) { + printk(KERN_ERR "mux: Could not add entry\n"); + return; + } + superset++; + } +} + +int __init omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls) +{ + if (mux_base) + return -EBUSY; + + mux_phys = mux_pbase; + mux_base = ioremap(mux_pbase, mux_size); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + +#ifdef CONFIG_OMAP_MUX + omap_mux_package_fixup(package_subset, superset); + omap_mux_package_init_balls(package_balls, superset); + omap_mux_set_cmdline_signals(); + omap_mux_set_board_signals(board_mux); +#endif + + omap_mux_init_list(superset); + + return 0; +} + +#endif /* CONFIG_ARCH_OMAP34XX */ + diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h new file mode 100644 index 000000000000..d8b4d5ad2278 --- /dev/null +++ b/arch/arm/mach-omap2/mux.h @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "mux34xx.h" + +#define OMAP_MUX_TERMINATOR 0xffff + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP_MUX_MODE0 0 +#define OMAP_MUX_MODE1 1 +#define OMAP_MUX_MODE2 2 +#define OMAP_MUX_MODE3 3 +#define OMAP_MUX_MODE4 4 +#define OMAP_MUX_MODE5 5 +#define OMAP_MUX_MODE6 6 +#define OMAP_MUX_MODE7 7 + +/* 24xx/34xx mux bit defines */ +#define OMAP_PULL_ENA (1 << 3) +#define OMAP_PULL_UP (1 << 4) +#define OMAP_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP_INPUT_EN (1 << 8) +#define OMAP_OFF_EN (1 << 9) +#define OMAP_OFFOUT_EN (1 << 10) +#define OMAP_OFFOUT_VAL (1 << 11) +#define OMAP_OFF_PULL_EN (1 << 12) +#define OMAP_OFF_PULL_UP (1 << 13) +#define OMAP_WAKEUP_EN (1 << 14) + +/* Active pin states */ +#define OMAP_PIN_OUTPUT 0 +#define OMAP_PIN_INPUT OMAP_INPUT_EN +#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \ + | OMAP_PULL_UP) +#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN) + +/* Off mode states */ +#define OMAP_PIN_OFF_NONE 0 +#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \ + | OMAP_OFFOUT_VAL) +#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN) +#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \ + | OMAP_OFF_PULL_UP) +#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) +#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN + +#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) + +/* Flags for omap_mux_init */ +#define OMAP_PACKAGE_MASK 0xffff +#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */ +#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */ + + +#define OMAP_MUX_NR_MODES 8 /* Available modes */ +#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */ + +/** + * struct omap_mux - data for omap mux register offset and it's value + * @reg_offset: mux register offset from the mux base + * @gpio: GPIO number + * @muxnames: available signal modes for a ball + */ +struct omap_mux { + u16 reg_offset; + u16 gpio; +#ifdef CONFIG_OMAP_MUX + char *muxnames[OMAP_MUX_NR_MODES]; +#ifdef CONFIG_DEBUG_FS + char *balls[OMAP_MUX_NR_SIDES]; +#endif +#endif +}; + +/** + * struct omap_ball - data for balls on omap package + * @reg_offset: mux register offset from the mux base + * @balls: available balls on the package + */ +struct omap_ball { + u16 reg_offset; + char *balls[OMAP_MUX_NR_SIDES]; +}; + +/** + * struct omap_board_mux - data for initializing mux registers + * @reg_offset: mux register offset from the mux base + * @mux_value: desired mux value to set + */ +struct omap_board_mux { + u16 reg_offset; + u16 value; +}; + +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX) + +/** + * omap_mux_init_gpio - initialize a signal based on the GPIO number + * @gpio: GPIO number + * @val: Options for the mux register value + */ +int omap_mux_init_gpio(int gpio, int val); + +/** + * omap_mux_init_signal - initialize a signal based on the signal name + * @muxname: Mux name in mode0_name.signal_name format + * @val: Options for the mux register value + */ +int omap_mux_init_signal(char *muxname, int val); + +#else + +static inline int omap_mux_init_gpio(int gpio, int val) +{ + return 0; +} +static inline int omap_mux_init_signal(char *muxname, int val) +{ + return 0; +} + +#endif + +/** + * omap_mux_get_gpio() - get mux register value based on GPIO number + * @gpio: GPIO number + * + */ +u16 omap_mux_get_gpio(int gpio); + +/** + * omap_mux_set_gpio() - set mux register value based on GPIO number + * @val: New mux register value + * @gpio: GPIO number + * + */ +void omap_mux_set_gpio(u16 val, int gpio); + +/** + * omap3_mux_init() - initialize mux system with board specific set + * @board_mux: Board specific mux table + * @flags: OMAP package type used for the board + */ +int omap3_mux_init(struct omap_board_mux *board_mux, int flags); + +/** + * omap_mux_init - private mux init function, do not call + */ +int omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c new file mode 100644 index 000000000000..68e0a595f9a1 --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.c @@ -0,0 +1,2099 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> + +#include "mux.h" + +#ifdef CONFIG_OMAP_MUX + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ + .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ +} + +#else + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ +} + +#endif + +#define _OMAP3_BALLENTRY(M0, bb, bt) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .balls = { bb, bt }, \ +} + +/* + * Superset of all mux modes for omap3 + */ +static struct omap_mux __initdata omap3_muxmodes[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, NULL, NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, NULL, NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", "hw_dbg9", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D6, 105, + "cam_d6", NULL, NULL, NULL, + "gpio_105", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D7, 106, + "cam_d7", NULL, NULL, NULL, + "gpio_106", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D8, 107, + "cam_d8", NULL, NULL, NULL, + "gpio_107", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D9, 108, + "cam_d9", NULL, NULL, NULL, + "gpio_108", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", "hw_dbg3", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", "hw_dbg2", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", "hw_dbg11", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", "hw_dbg10", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKA, 96, + "cam_xclka", NULL, NULL, NULL, + "gpio_96", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKB, 111, + "cam_xclkb", NULL, NULL, NULL, + "gpio_111", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX0, 112, + "csi2_dx0", NULL, NULL, NULL, + "gpio_112", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX1, 114, + "csi2_dx1", NULL, NULL, NULL, + "gpio_114", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY0, 113, + "csi2_dy0", NULL, NULL, NULL, + "gpio_113", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY1, 115, + "csi2_dy1", NULL, NULL, NULL, + "gpio_115", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_ACBIAS, 69, + "dss_acbias", NULL, NULL, NULL, + "gpio_69", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", NULL, "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", NULL, "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA10, 80, + "dss_data10", NULL, NULL, NULL, + "gpio_80", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA11, 81, + "dss_data11", NULL, NULL, NULL, + "gpio_81", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA12, 82, + "dss_data12", NULL, NULL, NULL, + "gpio_82", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA13, 83, + "dss_data13", NULL, NULL, NULL, + "gpio_83", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA14, 84, + "dss_data14", NULL, NULL, NULL, + "gpio_84", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA15, 85, + "dss_data15", NULL, NULL, NULL, + "gpio_85", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA16, 86, + "dss_data16", NULL, NULL, NULL, + "gpio_86", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA17, 87, + "dss_data17", NULL, NULL, NULL, + "gpio_87", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA18, 88, + "dss_data18", NULL, "mcspi3_clk", "dss_data0", + "gpio_88", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA19, 89, + "dss_data19", NULL, "mcspi3_simo", "dss_data1", + "gpio_89", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA20, 90, + "dss_data20", NULL, "mcspi3_somi", "dss_data2", + "gpio_90", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA21, 91, + "dss_data21", NULL, "mcspi3_cs0", "dss_data3", + "gpio_91", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA22, 92, + "dss_data22", NULL, "mcspi3_cs1", "dss_data4", + "gpio_92", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA23, 93, + "dss_data23", NULL, NULL, "dss_data5", + "gpio_93", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", NULL, NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", NULL, NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", NULL, "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", NULL, "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", "hw_dbg13", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", "hw_dbg12", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_VSYNC, 68, + "dss_vsync", NULL, NULL, NULL, + "gpio_68", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"), + _OMAP3_MUXENTRY(GPMC_A1, 34, + "gpmc_a1", NULL, NULL, NULL, + "gpio_34", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A10, 43, + "gpmc_a10", "sys_ndmareq3", NULL, NULL, + "gpio_43", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A2, 35, + "gpmc_a2", NULL, NULL, NULL, + "gpio_35", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A3, 36, + "gpmc_a3", NULL, NULL, NULL, + "gpio_36", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A4, 37, + "gpmc_a4", NULL, NULL, NULL, + "gpio_37", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A5, 38, + "gpmc_a5", NULL, NULL, NULL, + "gpio_38", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A6, 39, + "gpmc_a6", NULL, NULL, NULL, + "gpio_39", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A7, 40, + "gpmc_a7", NULL, NULL, NULL, + "gpio_40", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A8, 41, + "gpmc_a8", NULL, NULL, NULL, + "gpio_41", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A9, 42, + "gpmc_a9", "sys_ndmareq2", NULL, NULL, + "gpio_42", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_CLK, 59, + "gpmc_clk", NULL, NULL, NULL, + "gpio_59", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D10, 46, + "gpmc_d10", NULL, NULL, NULL, + "gpio_46", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D11, 47, + "gpmc_d11", NULL, NULL, NULL, + "gpio_47", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D12, 48, + "gpmc_d12", NULL, NULL, NULL, + "gpio_48", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D13, 49, + "gpmc_d13", NULL, NULL, NULL, + "gpio_49", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D14, 50, + "gpmc_d14", NULL, NULL, NULL, + "gpio_50", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D15, 51, + "gpmc_d15", NULL, NULL, NULL, + "gpio_51", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D8, 44, + "gpmc_d8", NULL, NULL, NULL, + "gpio_44", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D9, 45, + "gpmc_d9", NULL, NULL, NULL, + "gpio_45", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60, + "gpmc_nbe0_cle", NULL, NULL, NULL, + "gpio_60", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE1, 61, + "gpmc_nbe1", NULL, NULL, NULL, + "gpio_61", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS1, 52, + "gpmc_ncs1", NULL, NULL, NULL, + "gpio_52", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS2, 53, + "gpmc_ncs2", NULL, NULL, NULL, + "gpio_53", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS3, 54, + "gpmc_ncs3", "sys_ndmareq0", NULL, NULL, + "gpio_54", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS4, 55, + "gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt", + "gpio_55", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS5, 56, + "gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt", + "gpio_56", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS6, 57, + "gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt", + "gpio_57", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS7, 58, + "gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt", + "gpio_58", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NWP, 62, + "gpmc_nwp", NULL, NULL, NULL, + "gpio_62", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT1, 63, + "gpmc_wait1", NULL, NULL, NULL, + "gpio_63", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, NULL, NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", NULL, NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HDQ_SIO, 170, + "hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe", + "gpio_170", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_CLK, 120, + "hsusb0_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA4, 188, + "hsusb0_data4", NULL, NULL, NULL, + "gpio_188", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA5, 189, + "hsusb0_data5", NULL, NULL, NULL, + "gpio_189", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA6, 190, + "hsusb0_data6", NULL, NULL, NULL, + "gpio_190", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA7, 191, + "hsusb0_data7", NULL, NULL, NULL, + "gpio_191", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DIR, 122, + "hsusb0_dir", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_NXT, 124, + "hsusb0_nxt", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_STP, 121, + "hsusb0_stp", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SCL, 168, + "i2c2_scl", NULL, NULL, NULL, + "gpio_168", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SDA, 183, + "i2c2_sda", NULL, NULL, NULL, + "gpio_183", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SCL, 184, + "i2c3_scl", NULL, NULL, NULL, + "gpio_184", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SDA, 185, + "i2c3_sda", NULL, NULL, NULL, + "gpio_185", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SCL, 0, + "i2c4_scl", "sys_nvmode1", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SDA, 0, + "i2c4_sda", "sys_nvmode2", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU0, 11, + "jtag_emu0", NULL, NULL, NULL, + "gpio_11", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU1, 31, + "jtag_emu1", NULL, NULL, NULL, + "gpio_31", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", NULL, NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKX, 162, + "mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL, + "gpio_162", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DR, 159, + "mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL, + "gpio_159", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DX, 158, + "mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL, + "gpio_158", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", NULL, "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSX, 161, + "mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL, + "gpio_161", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_CLKX, 117, + "mcbsp2_clkx", NULL, NULL, NULL, + "gpio_117", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DR, 118, + "mcbsp2_dr", NULL, NULL, NULL, + "gpio_118", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DX, 119, + "mcbsp2_dx", NULL, NULL, NULL, + "gpio_119", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_FSX, 116, + "mcbsp2_fsx", NULL, NULL, NULL, + "gpio_116", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", NULL, NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", NULL, NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", NULL, NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", NULL, NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP_CLKS, 160, + "mcbsp_clks", NULL, "cam_shutter", NULL, + "gpio_160", "uart1_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CLK, 171, + "mcspi1_clk", "sdmmc2_dat4", NULL, NULL, + "gpio_171", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS0, 174, + "mcspi1_cs0", "sdmmc2_dat7", NULL, NULL, + "gpio_174", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", NULL, NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS2, 176, + "mcspi1_cs2", NULL, NULL, "sdmmc3_clk", + "gpio_176", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS3, 177, + "mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2", + "gpio_177", "mm2_txdat", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SIMO, 172, + "mcspi1_simo", "sdmmc2_dat5", NULL, NULL, + "gpio_172", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SOMI, 173, + "mcspi1_somi", "sdmmc2_dat6", NULL, NULL, + "gpio_173", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CLK, 178, + "mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7", + "gpio_178", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS0, 181, + "mcspi2_cs0", "gpt11_pwm_evt", + "hsusb2_tll_data6", "hsusb2_data6", + "gpio_181", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS1, 182, + "mcspi2_cs1", "gpt8_pwm_evt", + "hsusb2_tll_data3", "hsusb2_data3", + "gpio_182", "mm2_txen_n", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SIMO, 179, + "mcspi2_simo", "gpt9_pwm_evt", + "hsusb2_tll_data4", "hsusb2_data4", + "gpio_179", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SOMI, 180, + "mcspi2_somi", "gpt10_pwm_evt", + "hsusb2_tll_data5", "hsusb2_data5", + "gpio_180", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", NULL, NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", NULL, NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT4, 126, + "sdmmc1_dat4", NULL, "sim_io", NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT5, 127, + "sdmmc1_dat5", NULL, "sim_clk", NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT6, 128, + "sdmmc1_dat6", NULL, "sim_pwrctrl", NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT7, 129, + "sdmmc1_dat7", NULL, "sim_rst", NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CLK, 130, + "sdmmc2_clk", "mcspi3_clk", NULL, NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CMD, 131, + "sdmmc2_cmd", "mcspi3_simo", NULL, NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT0, 132, + "sdmmc2_dat0", "mcspi3_somi", NULL, NULL, + "gpio_132", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT1, 133, + "sdmmc2_dat1", NULL, NULL, NULL, + "gpio_133", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT2, 134, + "sdmmc2_dat2", "mcspi3_cs1", NULL, NULL, + "gpio_134", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT3, 135, + "sdmmc2_dat3", "mcspi3_cs0", NULL, NULL, + "gpio_135", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT4, 136, + "sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0", + "gpio_136", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, NULL, + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, NULL, + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT2, 4, + "sys_boot2", NULL, NULL, NULL, + "gpio_4", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, NULL, + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, NULL, + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, NULL, + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, NULL, + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT1, 10, + "sys_clkout1", NULL, NULL, NULL, + "gpio_10", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT2, 186, + "sys_clkout2", NULL, NULL, NULL, + "gpio_186", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKREQ, 1, + "sys_clkreq", NULL, NULL, NULL, + "gpio_1", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NIRQ, 0, + "sys_nirq", NULL, NULL, NULL, + "gpio_0", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NRESWARM, 30, + "sys_nreswarm", NULL, NULL, NULL, + "gpio_30", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_OFF_MODE, 9, + "sys_off_mode", NULL, NULL, NULL, + "gpio_9", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", NULL, NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RX, 151, + "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "gpio_151", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", NULL, NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_CTS, 144, + "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, + "gpio_144", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RTS, 145, + "uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL, + "gpio_145", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RX, 147, + "uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL, + "gpio_147", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_TX, 146, + "uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL, + "gpio_146", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_CTS_RCTX, 163, + "uart3_cts_rctx", NULL, NULL, NULL, + "gpio_163", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RTS_SD, 164, + "uart3_rts_sd", NULL, NULL, NULL, + "gpio_164", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RX_IRRX, 165, + "uart3_rx_irrx", NULL, NULL, NULL, + "gpio_165", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, + "uart3_tx_irtx", NULL, NULL, NULL, + "gpio_166", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +/* + * Signals different on CBC package compared to the superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_mux __initdata omap3_cbc_subset[] = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_subset NULL +#endif + +/* + * Balls for CBC package + * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom) + * + * FIXME: What's up with the outdated TI documentation? See: + * + * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package + * http://community.ti.com/forums/t/10982.aspx + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_ball __initdata omap3_cbc_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), + _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "e26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "a24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D6, "p25", NULL), + _OMAP3_BALLENTRY(CAM_D7, "p26", NULL), + _OMAP3_BALLENTRY(CAM_D8, "n25", NULL), + _OMAP3_BALLENTRY(CAM_D9, "n26", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "b23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "c23", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL), + _OMAP3_BALLENTRY(CAM_VS, "d23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "a23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ad4", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae4", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af6", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ae6", NULL), + _OMAP3_BALLENTRY(ETK_D13, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ae9", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D3, "aa3", NULL), + _OMAP3_BALLENTRY(ETK_D4, "y3", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ab1", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ae3", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D8, "aa4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "f1", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "f2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "e2", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "d1", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"), + _OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"), + _OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"), + _OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"), + _OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"), + _OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"), + _OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"), + _OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "r2", NULL), + _OMAP3_BALLENTRY(UART1_RX, "h3", NULL), + _OMAP3_BALLENTRY(UART1_TX, "l4", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "y24", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad21", NULL), + _OMAP3_BALLENTRY(UART2_TX, "ad22", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_ball NULL +#endif + +/* + * Signals different on CUS package compared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_mux __initdata omap3_cus_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_subset NULL +#endif + +/* + * Balls for CUS package + * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_ball __initdata omap3_cus_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL), + _OMAP3_BALLENTRY(CAM_D10, "f21", NULL), + _OMAP3_BALLENTRY(CAM_D11, "g21", NULL), + _OMAP3_BALLENTRY(CAM_D2, "g19", NULL), + _OMAP3_BALLENTRY(CAM_D3, "f19", NULL), + _OMAP3_BALLENTRY(CAM_D4, "g20", NULL), + _OMAP3_BALLENTRY(CAM_D5, "b21", NULL), + _OMAP3_BALLENTRY(CAM_D6, "l24", NULL), + _OMAP3_BALLENTRY(CAM_D7, "k24", NULL), + _OMAP3_BALLENTRY(CAM_D8, "j23", NULL), + _OMAP3_BALLENTRY(CAM_D9, "k23", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "h24", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a22", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL), + _OMAP3_BALLENTRY(CAM_VS, "e18", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "f18", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ad6", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ac6", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D11, "ac9", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ac10", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ad11", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ac11", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ad12", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ac7", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ad8", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ac5", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ac8", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad9", NULL), + _OMAP3_BALLENTRY(ETK_D8, "ac4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ad5", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "k4", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "k3", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "j4", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "j3", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL), + _OMAP3_BALLENTRY(GPMC_D10, "u1", NULL), + _OMAP3_BALLENTRY(GPMC_D11, "r3", NULL), + _OMAP3_BALLENTRY(GPMC_D12, "t3", NULL), + _OMAP3_BALLENTRY(GPMC_D13, "u2", NULL), + _OMAP3_BALLENTRY(GPMC_D14, "v1", NULL), + _OMAP3_BALLENTRY(GPMC_D15, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_D8, "r2", NULL), + _OMAP3_BALLENTRY(GPMC_D9, "t2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "w6", NULL), + _OMAP3_BALLENTRY(UART1_RX, "v7", NULL), + _OMAP3_BALLENTRY(UART1_TX, "w7", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_ball NULL +#endif + +/* + * Signals different on CBB package comapared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_mux __initdata omap3_cbb_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_subset NULL +#endif + +/* + * Balls for CBB package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_ball __initdata omap3_cbb_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_ball NULL +#endif + +/* + * Signals different on 36XX CBP package comapared to 34XX CBC package + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP) +struct omap_mux __initdata omap36xx_cbp_subset[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, "csi2_dx2", NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, "csi2_dy2", NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", "ssi2_wake", NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", "ssi2_rdy_tx", NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", "ssi2_dat_rx", NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", "ssi2_flag_rx", NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", "ssi2_rdy_rx", NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", "ssi2_dat_tx", NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", "ssi2_flag_tx", NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", "dsi_dx0", "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", "dsi_dy0", "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", "dsi_dx1", NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", "dsi_dy1", NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", "dssvenc656_data6", + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", "dssvenc656_data7", + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, "uart3_rx_irrx", NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, "uart3_tx_irtx", NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(GPMC_A11, 0, + "gpmc_a11", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, "uart4_tx", NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", "uart2_tx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", "uart2_rx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", "uart2_rts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", "uart2_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", "adpllv2d_dithering_en1", + "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", "ssi1_flag_rx", NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", "ssi1_wake", NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, + "sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, + "sad2d_mcad28", "mad2d_mcad28", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, + "sad2d_mcad29", "mad2d_mcad29", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, + "sad2d_mcad32", "mad2d_mcad32", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, + "sad2d_mcad33", "mad2d_mcad33", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, + "sad2d_mcad34", "mad2d_mcad34", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, + "sad2d_mcad35", "mad2d_mcad35", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, + "sad2d_mcad36", "mad2d_mcad36", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MREAD, 0, + "sad2d_mread", "mad2d_sread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, + "sad2d_mwrite", "mad2d_swrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, + "sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SREAD, 0, + "sad2d_sread", "mad2d_mread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, + "sad2d_swrite", "mad2d_mwrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", "ms_clk", NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", "ms_bs", NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", "ms_dat0", NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", "ms_dat1", NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", "ms_dat2", NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", "ms_dat3", NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SIM_IO, 126, + "sim_io", "sim_io_low_impedance", NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_CLK, 127, + "sim_clk", NULL, NULL, NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_PWRCTRL, 128, + "sim_pwrctrl", NULL, NULL, NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_RST, 129, + "sim_rst", NULL, NULL, NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, "dss_data18", + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, "dss_data19", + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, "dss_data20", + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21", + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22", + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, "dss_data23", + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_subset NULL +#endif + +/* + * Balls for 36XX CBP package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined (CONFIG_OMAP_PACKAGE_CBP) +struct omap_ball __initdata omap36xx_cbp_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"), + _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"), + _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"), + _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"), + _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"), + _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"), + _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL), + _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL), + _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL), + _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL), + _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL), + _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"), + _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"), + _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"), + _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"), + _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"), + _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"), + _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"), + _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"), + _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"), + _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"), + _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"), + _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"), + _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"), + _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"), + _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"), + _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"), + _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"), + _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), + _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), + _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"), + _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"), + _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"), + _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"), + _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"), + _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"), + _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"), + _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"), + _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"), + _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"), + _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"), + _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"), + _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"), + _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"), + _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"), + _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"), + _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"), + _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"), + _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"), + _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"), + _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"), + _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"), + _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"), + _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"), + _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"), + _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"), + _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"), + _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"), + _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"), + _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"), + _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"), + _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"), + _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"), + _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"), + _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"), + _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"), + _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"), + _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"), + _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"), + _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"), + _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"), + _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"), + _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"), + _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"), + _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"), + _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"), + _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"), + _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), + _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), + _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), + _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), + _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_ball NULL +#endif + +int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) +{ + struct omap_mux *package_subset; + struct omap_ball *package_balls; + + switch (flags & OMAP_PACKAGE_MASK) { + case (OMAP_PACKAGE_CBC): + package_subset = omap3_cbc_subset; + package_balls = omap3_cbc_ball; + break; + case (OMAP_PACKAGE_CBB): + package_subset = omap3_cbb_subset; + package_balls = omap3_cbb_ball; + break; + case (OMAP_PACKAGE_CUS): + package_subset = omap3_cus_subset; + package_balls = omap3_cus_ball; + break; + case (OMAP_PACKAGE_CBP): + package_subset = omap36xx_cbp_subset; + package_balls = omap36xx_cbp_ball; + break; + default: + printk(KERN_ERR "mux: Unknown omap package, mux disabled\n"); + return -EINVAL; + } + + return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE, + OMAP3_CONTROL_PADCONF_MUX_SIZE, + omap3_muxmodes, package_subset, board_subset, + package_balls); +} diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h new file mode 100644 index 000000000000..6543ebf8ecfc --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.h @@ -0,0 +1,398 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU + +#define OMAP3_MUX(mode0, mux_value) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \ + .value = (mux_value), \ +} + +/* + * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing + * + * Extracted from the TRM. Add 0x48002030 to these values to get the + * absolute addresses. The name in the macro is the mode-0 name of + * the pin. NOTE: These registers are 16-bits wide. + * + * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead + * of CHASSIS for some registers. For the defines, we follow the + * 36XX naming, and use SDMMC and CHASSIS. + */ +#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000 +#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002 +#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004 +#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006 +#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008 +#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a +#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c +#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e +#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010 +#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012 +#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014 +#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016 +#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018 +#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a +#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c +#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e +#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020 +#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022 +#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024 +#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026 +#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028 +#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a +#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c +#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e +#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030 +#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032 +#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034 +#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036 +#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038 +#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a +#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c +#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e +#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048 +#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a +#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c +#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e +#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050 +#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052 +#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054 +#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056 +#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058 +#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a +#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c +#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e +#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060 +#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062 +#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064 +#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066 +#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068 +#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a +#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c +#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e +#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070 +#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072 +#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074 +#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076 +#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078 +#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a +#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c +#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e +#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a +#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c +#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e +#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090 +#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092 +#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098 +#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0 +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2 +#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4 +#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6 +#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8 +#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa +#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac +#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae +#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba +#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc +#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be +#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca +#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc +#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce +#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da +#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc +#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de +#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0 +#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2 +#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4 +#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6 +#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8 +#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea +#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec +#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee +#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0 +#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2 +#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4 +#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6 +#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8 +#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa +#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc +#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe +#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100 +#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102 +#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104 +#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106 +#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108 +#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a +#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c +#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e +#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110 +#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e + +/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */ +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126 + +#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128 +#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a +#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c +#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e +#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140 +#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142 +#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144 +#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146 +#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148 +#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a +#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c +#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e +#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150 +#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152 +#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158 +#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e +#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160 +#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162 +#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164 +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166 +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168 +#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a +#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c +#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e +#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170 +#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172 +#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176 +#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188 +#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a +#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c +#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e +#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190 +#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192 +#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194 +#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198 +#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a +#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4 +#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae +#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc + +/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */ +#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204 +#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206 +#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210 +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a +#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c +#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e +#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224 + +#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228 +#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a +#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c +#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e +#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234 + +/* 36xx only */ +#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236 +#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570 +#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572 +#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574 +#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576 +#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578 +#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a +#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c +#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e +#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580 +#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582 +#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584 +#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586 +#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588 +#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a +#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c +#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e +#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594 +#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596 +#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598 +#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a +#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c +#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e +#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0 +#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2 +#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4 + +/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */ +#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126 + +#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8 +#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa +#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac +#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae +#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0 +#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2 +#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4 +#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6 +#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8 +#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba +#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc +#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be +#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0 +#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2 +#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4 +#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6 +#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8 +#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca +#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0 +#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2 +#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4 +#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6 +#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da +#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc +#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de +#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6 +#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea +#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec +#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee +#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0 +#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c +#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e +#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 + +#define OMAP3_CONTROL_PADCONF_MUX_SIZE \ + (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4afadba09477..aa3f65c2ac97 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -27,20 +27,39 @@ * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. - * The primary core will update the this flag using a hardware - * register AuxCoreBoot1. + * The primary core will update this flag using a hardware + * register AuxCoreBoot0. */ ENTRY(omap_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #0x0f -hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1 - ldr r2, [r1] - cmp r2, r0 +hold: ldr r12,=0x103 + dsb + smc @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 bne hold /* - * we've been released from the cpu_release,secondary_stack + * we've been released from the wait loop,secondary_stack * should now contain the SVC stack for this core */ b secondary_startup +END(omap_secondary_startup) + +ENTRY(omap_modify_auxcoreboot0) + stmfd sp!, {r1-r12, lr} + ldr r12, =0x104 + dsb + smc + ldmfd sp!, {r1-r12, pc} +END(omap_modify_auxcoreboot0) + +ENTRY(omap_auxcoreboot_addr) + stmfd sp!, {r2-r12, lr} + ldr r12, =0x105 + dsb + smc + ldmfd sp!, {r2-r12, pc} +END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4890bcf4dadd..38153e5fbca0 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -17,19 +17,15 @@ */ #include <linux/init.h> #include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <asm/cacheflush.h> #include <asm/localtimer.h> #include <asm/smp_scu.h> #include <mach/hardware.h> #include <plat/common.h> -/* Registers used for communicating startup information */ -static void __iomem *omap4_auxcoreboot_reg0; -static void __iomem *omap4_auxcoreboot_reg1; - /* SCU base address */ static void __iomem *scu_base; @@ -65,8 +61,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - /* * Set synchronisation state between this boot processor * and the secondary one @@ -74,18 +68,15 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) spin_lock(&boot_lock); /* - * Update the AuxCoreBoot1 with boot state for secondary core. + * Update the AuxCoreBoot0 with boot state for secondary core. * omap_secondary_startup() routine will hold the secondary core till * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - __raw_writel(cpu, omap4_auxcoreboot_reg1); + omap_modify_auxcoreboot0(0x200, 0x0); + flush_cache_all(); smp_wmb(); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) - ; - /* * Now the secondary core is starting up let it run its * calibrations, then wait for it to finish @@ -99,17 +90,18 @@ static void __init wakeup_secondary(void) { /* * Write the address of secondary startup routine into the - * AuxCoreBoot0 where ROM code will jump and start executing + * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ - __raw_writel(virt_to_phys(omap_secondary_startup), \ - omap4_auxcoreboot_reg0); + omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); smp_wmb(); /* * Send a 'sev' to wake the secondary core from WFE. + * Drain the outstanding writes to memory */ + dsb(); set_event(); mb(); } @@ -136,7 +128,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); unsigned int cpu = smp_processor_id(); - void __iomem *omap4_wkupgen_base; int i; /* sanity check */ @@ -168,12 +159,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - /* Never released */ - omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); - BUG_ON(!omap4_wkupgen_base); - omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; - omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804; - if (max_cpus > 1) { /* * Enable the local timer or broadcast device for the diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 633b216a8b26..d8c8545875b1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -45,6 +45,7 @@ #include <linux/mutex.h> #include <linux/bootmem.h> +#include <plat/common.h> #include <plat/cpu.h> #include <plat/clockdomain.h> #include <plat/powerdomain.h> @@ -210,6 +211,32 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v + * @oh: struct omap_hwmod * + * @autoidle: desired AUTOIDLE bitfield value (0 or 1) + * @v: pointer to register contents to modify + * + * Update the module autoidle bit in @v to be @autoidle for the @oh + * hwmod. The autoidle bit controls whether the module can gate + * internal clocks automatically when it isn't doing anything; the + * exact function of this bit varies on a per-module basis. This + * function does not write to the hardware. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle, + u32 *v) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE)) + return -EINVAL; + + *v &= ~SYSC_AUTOIDLE_MASK; + *v |= autoidle << SYSC_AUTOIDLE_SHIFT; + + return 0; +} + +/** * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware * @oh: struct omap_hwmod * * @@ -326,6 +353,9 @@ static int _init_main_clk(struct omap_hwmod *oh) ret = -EINVAL; oh->_clk = c; + WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n", + oh->clkdev_con_id, c->name); + return ret; } @@ -557,8 +587,19 @@ static void _sysc_enable(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* XXX OCP AUTOIDLE bit? */ + if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) { + idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ? + 0 : 1; + _set_module_autoidle(oh, idlemode, &v); + } + + /* XXX OCP ENAWAKEUP bit? */ + /* + * XXX The clock framework should handle this, by + * calling into this code. But this must wait until the + * clock structures are tagged with omap_hwmod entries + */ if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT && oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY) _set_clockactivity(oh, oh->sysconfig->clockact, &v); @@ -622,7 +663,8 @@ static void _sysc_shutdown(struct omap_hwmod *oh) if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) _set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v); - /* XXX clear OCP AUTOIDLE bit? */ + if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) + _set_module_autoidle(oh, 1, &v); _write_sysconfig(v, oh); } @@ -736,7 +778,7 @@ static int _wait_target_ready(struct omap_hwmod *oh) static int _reset(struct omap_hwmod *oh) { u32 r, v; - int c; + int c = 0; if (!oh->sysconfig || !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) || @@ -758,13 +800,9 @@ static int _reset(struct omap_hwmod *oh) return r; _write_sysconfig(v, oh); - c = 0; - while (c < MAX_MODULE_RESET_WAIT && - !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) & - SYSS_RESETDONE_MASK)) { - udelay(1); - c++; - } + omap_test_timeout((omap_hwmod_readl(oh, oh->sysconfig->syss_offs) & + SYSS_RESETDONE_MASK), + MAX_MODULE_RESET_WAIT, c); if (c == MAX_MODULE_RESET_WAIT) WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n", @@ -884,33 +922,6 @@ static int _shutdown(struct omap_hwmod *oh) } /** - * _write_clockact_lock - set the module's clockactivity bits - * @oh: struct omap_hwmod * - * @clockact: CLOCKACTIVITY field bits - * - * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Returns -EINVAL if the hwmod is in the - * wrong state or returns 0. - */ -static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact) -{ - u32 v; - - if (!oh->sysconfig || - !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)) - return -EINVAL; - - mutex_lock(&omap_hwmod_mutex); - v = oh->_sysc_cache; - _set_clockactivity(oh, clockact, &v); - _write_sysconfig(v, oh); - mutex_unlock(&omap_hwmod_mutex); - - return 0; -} - - -/** * _setup - do initial configuration of omap_hwmod * @oh: struct omap_hwmod * * @@ -948,11 +959,19 @@ static int _setup(struct omap_hwmod *oh) _enable(oh); - if (!(oh->flags & HWMOD_INIT_NO_RESET)) - _reset(oh); - - /* XXX OCP AUTOIDLE bit? */ - /* XXX OCP ENAWAKEUP bit? */ + if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + /* + * XXX Do the OCP_SYSCONFIG bits need to be + * reprogrammed after a reset? If not, then this can + * be removed. If they do, then probably the + * _enable() function should be split to avoid the + * rewrite of the OCP_SYSCONFIG register. + */ + if (oh->sysconfig) { + _update_sysc_cache(oh); + _sysc_enable(oh); + } + } if (!(oh->flags & HWMOD_INIT_NO_IDLE)) _idle(oh); @@ -1348,8 +1367,9 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) /* For each IRQ, DMA, memory area, fill in array.*/ for (i = 0; i < oh->mpu_irqs_cnt; i++) { - (res + r)->start = *(oh->mpu_irqs + i); - (res + r)->end = *(oh->mpu_irqs + i); + (res + r)->name = (oh->mpu_irqs + i)->name; + (res + r)->start = (oh->mpu_irqs + i)->irq; + (res + r)->end = (oh->mpu_irqs + i)->irq; (res + r)->flags = IORESOURCE_IRQ; r++; } @@ -1454,62 +1474,6 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, } /** - * omap_hwmod_set_clockact_none - set clockactivity test to BOTH - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_both(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to MAIN - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_main(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to ICLK - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to NONE - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_none(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_NONE); -} - -/** * omap_hwmod_enable_wakeup - allow device to wake up the system * @oh: struct omap_hwmod * * diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c new file mode 100644 index 000000000000..126a9396b3a8 --- /dev/null +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -0,0 +1,126 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2420_rate_table[] = { + /* PRCM I - FAST */ + {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, + RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, + RATE_IN_242X}, + + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c new file mode 100644 index 000000000000..edb81672c844 --- /dev/null +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -0,0 +1,133 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2430_rate_table[] = { + /* PRCM #4 - ratio2 (ES2.1) - FAST */ + {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - FAST */ + {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #4 - ratio1 (ES2.1) - SLOW */ + {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - SLOW */ + {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h new file mode 100644 index 000000000000..ed6df04e2f29 --- /dev/null +++ b/arch/arm/mach-omap2/opp2xxx.h @@ -0,0 +1,424 @@ +/* + * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H +#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H + +/** + * struct prcm_config - define clock rates on a per-OPP basis (24xx) + * + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP + * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * This is deprecated. As soon as we have a decent OPP API, we should + * move all this stuff to it. + */ +struct prcm_config { + unsigned long xtal_speed; /* crystal rate */ + unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ + unsigned long mpu_speed; /* speed of MPU */ + unsigned long cm_clksel_mpu; /* mpu divider */ + unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ + unsigned long cm_clksel_gfx; /* gfx dividers */ + unsigned long cm_clksel1_core; /* major subsystem dividers */ + unsigned long cm_clksel1_pll; /* m,n */ + unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ + unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ + unsigned long base_sdrc_rfr; /* base refresh timing for a set */ + unsigned char flags; +}; + + +/* Core fields for cm_clksel, not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/*------------------------------------------------------------------------- + * Voltage/DPLL ratios + *-------------------------------------------------------------------------*/ + +/* 2430 Ratio's, 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R1_CLKSEL_L4 | R1_CLKSEL_L3) +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF) +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R2_CLKSEL_L4 | R2_CLKSEL_L3) +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF) +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Bootm (BYPASS) */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RB_CLKSEL_L4 | RB_CLKSEL_L3) +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF) +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2420 Ratio Equivalents */ +#define RXX_CLKSEL_VLYNQ (0x12 << 15) +#define RXX_CLKSEL_SSI (0x8 << 20) + +/* 2420-PRCM III 532MHz core */ +#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ +#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ +#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ +#define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ + RIII_CLKSEL_L3) +#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ +#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU +#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ +#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ +#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ +#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ +#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ +#define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ + RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ + RIII_CLKSEL_DSP) +#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ +#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX + +/* 2420-PRCM II 600MHz core */ +#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ +#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ +#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ +#define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \ + RII_CLKSEL_L3) +#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ +#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU +#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ +#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ +#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ +#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ +#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \ + RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ + RII_CLKSEL_DSP) +#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ +#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX + +/* 2420-PRCM I 660MHz core */ +#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ +#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ +#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ +#define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RI_CLKSEL_L4 | RI_CLKSEL_L3) +#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ +#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU +#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ +#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ +#define RI_SYNC_DSP (1 << 7) /* Activate sync */ +#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ +#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \ + RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ + RI_CLKSEL_DSP) +#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ +#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX + +/* 2420-PRCM VII (boot) */ +#define RVII_CLKSEL_L3 (1 << 0) +#define RVII_CLKSEL_L4 (1 << 5) +#define RVII_CLKSEL_DSS1 (1 << 8) +#define RVII_CLKSEL_DSS2 (0 << 13) +#define RVII_CLKSEL_VLYNQ (1 << 15) +#define RVII_CLKSEL_SSI (1 << 20) +#define RVII_CLKSEL_USB (1 << 25) + +#define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ + RVII_CLKSEL_VLYNQ | \ + RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \ + RVII_CLKSEL_L4 | RVII_CLKSEL_L3) + +#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ +#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU + +#define RVII_CLKSEL_DSP (1 << 0) +#define RVII_CLKSEL_DSP_IF (1 << 5) +#define RVII_SYNC_DSP (0 << 7) +#define RVII_CLKSEL_IVA (1 << 8) +#define RVII_SYNC_IVA (0 << 13) +#define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \ + RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \ + RVII_CLKSEL_DSP) + +#define RVII_CLKSEL_GFX (1 << 0) +#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX + +/*------------------------------------------------------------------------- + * 2430 Target modes: Along with each configuration the CPU has several + * modes which goes along with them. Modes mainly are the addition of + * describe DPLL combinations to go along with a ratio. + *-------------------------------------------------------------------------*/ + +/* Hardware governed */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* + * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed + * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz + */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M5A_DPLL_MULT_13 (61 << 12) +#define M5A_DPLL_DIV_13 (2 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M5A_DPLL_MULT_19 (55 << 12) +#define M5A_DPLL_DIV_19 (3 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) +/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) +/* + * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz + */ +#define M4_DPLL_MULT_12 (133 << 12) +#define M4_DPLL_DIV_12 (3 << 8) +#define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +#define M4_DPLL_MULT_13 (399 << 12) +#define M4_DPLL_DIV_13 (12 << 8) +#define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +#define M4_DPLL_MULT_19 (145 << 12) +#define M4_DPLL_DIV_19 (6 << 8) +#define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* + * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz + */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M3_DPLL_MULT_13 (76 << 12) +#define M3_DPLL_DIV_13 (2 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M3_DPLL_MULT_19 (17 << 12) +#define M3_DPLL_DIV_19 (0 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* + * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz + */ +#define M2_DPLL_MULT_12 (55 << 12) +#define M2_DPLL_DIV_12 (1 << 8) +#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, + * relock time issue */ +/* Core frequency changed from 330/165 to 329/164 MHz*/ +#define M2_DPLL_MULT_13 (76 << 12) +#define M2_DPLL_DIV_13 (2 << 8) +#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +#define M2_DPLL_MULT_19 (17 << 12) +#define M2_DPLL_DIV_19 (0 << 8) +#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_12) + +#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_13) + +#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_19) + +/* + * 2430 - chassis (sedna) + * 165 (ratio1) same as above #2 + * 150 (ratio1) + * 133 (ratio2) same as above #4 + * 110 (ratio2) same as above #3 + * 104 (ratio2) + * boot (boot) + */ + +/* PRCM I target DPLL = 2*330MHz = 660MHz */ +#define MI_DPLL_MULT_12 (55 << 12) +#define MI_DPLL_DIV_12 (1 << 8) +#define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +/* + * 2420 Equivalent - mode registers + * PRCM II , target DPLL = 2*300MHz = 600MHz + */ +#define MII_DPLL_MULT_12 (50 << 12) +#define MII_DPLL_DIV_12 (1 << 8) +#define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define MII_DPLL_MULT_13 (300 << 12) +#define MII_DPLL_DIV_13 (12 << 8) +#define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +/* PRCM III target DPLL = 2*266 = 532MHz*/ +#define MIII_DPLL_MULT_12 (133 << 12) +#define MIII_DPLL_DIV_12 (5 << 8) +#define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_12 | \ + MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12) +#define MIII_DPLL_MULT_13 (266 << 12) +#define MIII_DPLL_DIV_13 (12 << 8) +#define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_13 | \ + MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13) + +/* PRCM VII (boot bypass) */ +#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL +#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL + +/* High and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* MPU speed defines */ +#define S12M 12000000 +#define S13M 13000000 +#define S19M 19200000 +#define S26M 26000000 +#define S100M 100000000 +#define S133M 133000000 +#define S150M 150000000 +#define S164M 164000000 +#define S165M 165000000 +#define S199M 199000000 +#define S200M 200000000 +#define S266M 266000000 +#define S300M 300000000 +#define S329M 329000000 +#define S330M 330000000 +#define S399M 399000000 +#define S400M 400000000 +#define S532M 532000000 +#define S600M 600000000 +#define S658M 658000000 +#define S660M 660000000 +#define S798M 798000000 + + +extern const struct prcm_config omap2420_rate_table[]; +extern const struct prcm_config omap2430_rate_table[]; +extern const struct prcm_config *rate_table; +extern const struct prcm_config *curr_prcm_set; + +#endif diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 8baa30d2acfb..860b755d2220 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -326,7 +326,7 @@ int pm_dbg_regset_save(int reg_set) return 0; } -static const char pwrdm_state_names[][4] = { +static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { "OFF", "RET", "INA", @@ -381,7 +381,7 @@ static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user) seq_printf(s, "%s (%s)", pwrdm->name, pwrdm_state_names[pwrdm->state]); - for (i = 0; i < 4; i++) + for (i = 0; i < PWRDM_MAX_PWRSTS; i++) seq_printf(s, ",%s:%d", pwrdm_state_names[i], pwrdm->state_counter[i]); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index b6990e377783..26b3f3ee82a3 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -10,9 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN -# define DEBUG -#endif +#undef DEBUG #include <linux/kernel.h> #include <linux/module.h> @@ -160,7 +158,7 @@ static __init void _pwrdm_setup(struct powerdomain *pwrdm) { int i; - for (i = 0; i < 4; i++) + for (i = 0; i < PWRDM_MAX_PWRSTS; i++) pwrdm->state_counter[i] = 0; pwrdm_wait_transition(pwrdm); @@ -480,7 +478,7 @@ int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n", @@ -513,7 +511,7 @@ int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: hardware will no longer wake up %s after %s " @@ -550,7 +548,7 @@ int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP, @@ -573,10 +571,10 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -584,7 +582,7 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n", @@ -612,10 +610,10 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -623,7 +621,7 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: will no longer prevent %s from sleeping if " @@ -655,10 +653,10 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -666,7 +664,7 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP, @@ -985,6 +983,9 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) if (pwrdm->banks < (bank + 1)) return -EEXIST; + if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK) + bank = 1; + /* * The register bit names below may not correspond to the * actual names of the bits in each powerdomain's register, @@ -1032,6 +1033,9 @@ int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) if (pwrdm->banks < (bank + 1)) return -EEXIST; + if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK) + bank = 1; + /* * The register bit names below may not correspond to the * actual names of the bits in each powerdomain's register, diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index fd09b0827df0..588f7e07d0ea 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -190,6 +190,7 @@ static struct powerdomain mpu_34xx_pwrdm = { .wkdep_srcs = mpu_34xx_wkdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_MPU_QUIRK, .banks = 1, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index cb1ae84e0925..61ac2a418bd0 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -4,10 +4,12 @@ /* * OMAP2/3 PRCM base and module definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley + * OMAP4 defines in this file are automatically generated from the OMAP hardware + * databases. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -49,6 +51,73 @@ #define OMAP3430_NEON_MOD 0xb00 #define OMAP3430ES2_USBHOST_MOD 0xc00 +#define BITS(n_bit) \ + (((1 << n_bit) - 1) | (1 << n_bit)) + +#define BITFIELD(l_bit, u_bit) \ + (BITS(u_bit) & ~((BITS(l_bit)) >> 1)) + +/* OMAP44XX specific module offsets */ + +/* CM1 instances */ + +#define OMAP4430_CM1_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_CM1_CKGEN_MOD 0x0100 +#define OMAP4430_CM1_MPU_MOD 0x0300 +#define OMAP4430_CM1_TESLA_MOD 0x0400 +#define OMAP4430_CM1_ABE_MOD 0x0500 +#define OMAP4430_CM1_RESTORE_MOD 0x0e00 +#define OMAP4430_CM1_INSTR_MOD 0x0f00 + +/* CM2 instances */ + +#define OMAP4430_CM2_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_CM2_CKGEN_MOD 0x0100 +#define OMAP4430_CM2_ALWAYS_ON_MOD 0x0600 +#define OMAP4430_CM2_CORE_MOD 0x0700 +#define OMAP4430_CM2_IVAHD_MOD 0x0f00 +#define OMAP4430_CM2_CAM_MOD 0x1000 +#define OMAP4430_CM2_DSS_MOD 0x1100 +#define OMAP4430_CM2_GFX_MOD 0x1200 +#define OMAP4430_CM2_L3INIT_MOD 0x1300 +#define OMAP4430_CM2_L4PER_MOD 0x1400 +#define OMAP4430_CM2_CEFUSE_MOD 0x1600 +#define OMAP4430_CM2_RESTORE_MOD 0x1e00 +#define OMAP4430_CM2_INSTR_MOD 0x1f00 + +/* PRM instances */ + +#define OMAP4430_PRM_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_PRM_CKGEN_MOD 0x0100 +#define OMAP4430_PRM_MPU_MOD 0x0300 +#define OMAP4430_PRM_TESLA_MOD 0x0400 +#define OMAP4430_PRM_ABE_MOD 0x0500 +#define OMAP4430_PRM_ALWAYS_ON_MOD 0x0600 +#define OMAP4430_PRM_CORE_MOD 0x0700 +#define OMAP4430_PRM_IVAHD_MOD 0x0f00 +#define OMAP4430_PRM_CAM_MOD 0x1000 +#define OMAP4430_PRM_DSS_MOD 0x1100 +#define OMAP4430_PRM_GFX_MOD 0x1200 +#define OMAP4430_PRM_L3INIT_MOD 0x1300 +#define OMAP4430_PRM_L4PER_MOD 0x1400 +#define OMAP4430_PRM_CEFUSE_MOD 0x1600 +#define OMAP4430_PRM_WKUP_MOD 0x1700 +#define OMAP4430_PRM_WKUP_CM_MOD 0x1800 +#define OMAP4430_PRM_EMU_MOD 0x1900 +#define OMAP4430_PRM_EMU_CM_MOD 0x1a00 +#define OMAP4430_PRM_DEVICE_MOD 0x1b00 +#define OMAP4430_PRM_INSTR_MOD 0x1f00 + +/* SCRM instances */ + +#define OMAP4430_SCRM_SCRM_MOD 0x0000 + +/* CHIRONSS instances */ + +#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD 0x0000 +#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD 0x0200 +#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD 0x0400 +#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD 0x0800 /* 24XX register bits shared between CM & PRM registers */ diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 029d376198d4..3ea8177ffb25 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -34,6 +34,7 @@ static void __iomem *prm_base; static void __iomem *cm_base; +static void __iomem *cm2_base; #define MAX_MODULE_ENABLE_WAIT 100000 @@ -170,14 +171,12 @@ u32 prm_read_mod_reg(s16 module, u16 idx) { return __omap_prcm_read(prm_base, module, idx); } -EXPORT_SYMBOL(prm_read_mod_reg); /* Write into a register in a PRM module */ void prm_write_mod_reg(u32 val, s16 module, u16 idx) { __omap_prcm_write(val, prm_base, module, idx); } -EXPORT_SYMBOL(prm_write_mod_reg); /* Read-modify-write a register in a PRM module. Caller must lock */ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) @@ -191,21 +190,18 @@ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) return v; } -EXPORT_SYMBOL(prm_rmw_mod_reg_bits); /* Read a register in a CM module */ u32 cm_read_mod_reg(s16 module, u16 idx) { return __omap_prcm_read(cm_base, module, idx); } -EXPORT_SYMBOL(cm_read_mod_reg); /* Write into a register in a CM module */ void cm_write_mod_reg(u32 val, s16 module, u16 idx) { __omap_prcm_write(val, cm_base, module, idx); } -EXPORT_SYMBOL(cm_write_mod_reg); /* Read-modify-write a register in a CM module. Caller must lock */ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) @@ -219,7 +215,6 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) return v; } -EXPORT_SYMBOL(cm_rmw_mod_reg_bits); /** * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness @@ -247,9 +242,8 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name) BUG(); /* Wait for lock */ - while (((__raw_readl(reg) & mask) != ena) && - (i++ < MAX_MODULE_ENABLE_WAIT)) - udelay(1); + omap_test_timeout(((__raw_readl(reg) & mask) == ena), + MAX_MODULE_ENABLE_WAIT, i); if (i < MAX_MODULE_ENABLE_WAIT) pr_debug("cm: Module associated with clock %s ready after %d " @@ -265,6 +259,7 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { prm_base = omap2_globals->prm; cm_base = omap2_globals->cm; + cm2_base = omap2_globals->cm2; } #ifdef CONFIG_ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h new file mode 100644 index 000000000000..301c810fb269 --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-44xx.h @@ -0,0 +1,2205 @@ +/* + * OMAP44xx Power Management register bits + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H + +#include "prm.h" + + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT (1 << 1) +#define OMAP4430_ABBOFF_ACT_EXPORT_MASK BITFIELD(1, 1) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT (1 << 2) +#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_ABB_IVA_DONE_EN_SHIFT (1 << 31) +#define OMAP4430_ABB_IVA_DONE_EN_MASK BITFIELD(31, 31) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_ABB_IVA_DONE_ST_SHIFT (1 << 31) +#define OMAP4430_ABB_IVA_DONE_ST_MASK BITFIELD(31, 31) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_ABB_MPU_DONE_EN_SHIFT (1 << 7) +#define OMAP4430_ABB_MPU_DONE_EN_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_ABB_MPU_DONE_ST_SHIFT (1 << 7) +#define OMAP4430_ABB_MPU_DONE_ST_MASK BITFIELD(7, 7) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_ACTIVE_FBB_SEL_SHIFT (1 << 2) +#define OMAP4430_ACTIVE_FBB_SEL_MASK BITFIELD(2, 2) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_ACTIVE_RBB_SEL_SHIFT (1 << 1) +#define OMAP4430_ACTIVE_RBB_SEL_MASK BITFIELD(1, 1) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_AESSMEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_AESSMEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_AESSMEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_AESSMEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_ABE_PWRSTST */ +#define OMAP4430_AESSMEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_AESSMEM_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_AIPOFF_SHIFT (1 << 8) +#define OMAP4430_AIPOFF_MASK BITFIELD(8, 8) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK BITFIELD(0, 1) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT (1 << 4) +#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK BITFIELD(4, 5) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT (1 << 2) +#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK BITFIELD(2, 3) + +/* Used by PM_CAM_PWRSTCTRL */ +#define OMAP4430_CAM_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_CAM_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_CAM_PWRSTST */ +#define OMAP4430_CAM_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_CAM_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_CLKREQCTRL */ +#define OMAP4430_CLKREQ_COND_SHIFT (1 << 0) +#define OMAP4430_CLKREQ_COND_MASK BITFIELD(0, 2) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_CMDRA_VDD_CORE_L_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_CMDRA_VDD_IVA_L_MASK BITFIELD(8, 15) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_CMDRA_VDD_MPU_L_MASK BITFIELD(16, 23) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_CORE_L_SHIFT (1 << 4) +#define OMAP4430_CMD_VDD_CORE_L_MASK BITFIELD(4, 4) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_IVA_L_SHIFT (1 << 12) +#define OMAP4430_CMD_VDD_IVA_L_MASK BITFIELD(12, 12) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_MPU_L_SHIFT (1 << 17) +#define OMAP4430_CMD_VDD_MPU_L_MASK BITFIELD(17, 17) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT (1 << 6) +#define OMAP4430_CORE_OCMRAM_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_DATA_SHIFT (1 << 16) +#define OMAP4430_DATA_MASK BITFIELD(16, 23) + +/* Used by PRM_DEVICE_OFF_CTRL */ +#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT (1 << 0) +#define OMAP4430_DEVICE_OFF_ENABLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_DFILTEREN_SHIFT (1 << 6) +#define OMAP4430_DFILTEREN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ +#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT (1 << 4) +#define OMAP4430_DPLL_ABE_RECAL_EN_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT (1 << 4) +#define OMAP4430_DPLL_ABE_RECAL_ST_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT (1 << 0) +#define OMAP4430_DPLL_CORE_RECAL_EN_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT (1 << 0) +#define OMAP4430_DPLL_CORE_RECAL_ST_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT (1 << 6) +#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT (1 << 6) +#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ +#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT (1 << 2) +#define OMAP4430_DPLL_IVA_RECAL_EN_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT (1 << 2) +#define OMAP4430_DPLL_IVA_RECAL_ST_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT (1 << 1) +#define OMAP4430_DPLL_MPU_RECAL_EN_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT (1 << 1) +#define OMAP4430_DPLL_MPU_RECAL_ST_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT (1 << 3) +#define OMAP4430_DPLL_PER_RECAL_EN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT (1 << 3) +#define OMAP4430_DPLL_PER_RECAL_ST_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT (1 << 7) +#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT (1 << 7) +#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT (1 << 5) +#define OMAP4430_DPLL_USB_RECAL_EN_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT (1 << 5) +#define OMAP4430_DPLL_USB_RECAL_ST_MASK BITFIELD(5, 5) + +/* Used by PM_DSS_PWRSTCTRL */ +#define OMAP4430_DSS_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_DSS_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_DSS_PWRSTCTRL */ +#define OMAP4430_DSS_MEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_DSS_MEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_DSS_PWRSTST */ +#define OMAP4430_DSS_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_DSS_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT (1 << 8) +#define OMAP4430_DUCATI_L2RAM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT (1 << 22) +#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK BITFIELD(22, 23) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT (1 << 11) +#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK BITFIELD(11, 11) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT (1 << 10) +#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK BITFIELD(10, 11) + +/* Used by RM_MPU_RSTST */ +#define OMAP4430_EMULATION_RST_SHIFT (1 << 0) +#define OMAP4430_EMULATION_RST_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_EMULATION_RST1ST_SHIFT (1 << 3) +#define OMAP4430_EMULATION_RST1ST_MASK BITFIELD(3, 3) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_EMULATION_RST2ST_SHIFT (1 << 4) +#define OMAP4430_EMULATION_RST2ST_MASK BITFIELD(4, 4) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT (1 << 3) +#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK BITFIELD(3, 3) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT (1 << 4) +#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK BITFIELD(4, 4) + +/* Used by PM_EMU_PWRSTCTRL */ +#define OMAP4430_EMU_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_EMU_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_EMU_PWRSTST */ +#define OMAP4430_EMU_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_EMU_BANK_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP + */ +#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT (1 << 0) +#define OMAP4430_ENABLE_RTA_EXPORT_MASK BITFIELD(0, 0) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC1_SHIFT (1 << 3) +#define OMAP4430_ENFUNC1_MASK BITFIELD(3, 3) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC3_SHIFT (1 << 5) +#define OMAP4430_ENFUNC3_MASK BITFIELD(5, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC4_SHIFT (1 << 6) +#define OMAP4430_ENFUNC4_MASK BITFIELD(6, 6) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC5_SHIFT (1 << 7) +#define OMAP4430_ENFUNC5_MASK BITFIELD(7, 7) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_ERRORGAIN_SHIFT (1 << 16) +#define OMAP4430_ERRORGAIN_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_ERROROFFSET_SHIFT (1 << 24) +#define OMAP4430_ERROROFFSET_MASK BITFIELD(24, 31) + +/* Used by PRM_RSTST */ +#define OMAP4430_EXTERNAL_WARM_RST_SHIFT (1 << 5) +#define OMAP4430_EXTERNAL_WARM_RST_MASK BITFIELD(5, 5) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_FORCEUPDATE_SHIFT (1 << 1) +#define OMAP4430_FORCEUPDATE_MASK BITFIELD(1, 1) + +/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */ +#define OMAP4430_FORCEUPDATEWAIT_SHIFT (1 << 8) +#define OMAP4430_FORCEUPDATEWAIT_MASK BITFIELD(8, 31) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */ +#define OMAP4430_FORCEWKUP_EN_SHIFT (1 << 10) +#define OMAP4430_FORCEWKUP_EN_MASK BITFIELD(10, 10) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_FORCEWKUP_ST_SHIFT (1 << 10) +#define OMAP4430_FORCEWKUP_ST_MASK BITFIELD(10, 10) + +/* Used by PM_GFX_PWRSTCTRL */ +#define OMAP4430_GFX_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_GFX_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_GFX_PWRSTST */ +#define OMAP4430_GFX_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_GFX_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_RSTST */ +#define OMAP4430_GLOBAL_COLD_RST_SHIFT (1 << 0) +#define OMAP4430_GLOBAL_COLD_RST_MASK BITFIELD(0, 0) + +/* Used by PRM_RSTST */ +#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT (1 << 1) +#define OMAP4430_GLOBAL_WARM_SW_RST_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_GLOBAL_WUEN_SHIFT (1 << 16) +#define OMAP4430_GLOBAL_WUEN_MASK BITFIELD(16, 16) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_HSMCODE_SHIFT (1 << 0) +#define OMAP4430_HSMCODE_MASK BITFIELD(0, 2) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_HSMODEEN_SHIFT (1 << 3) +#define OMAP4430_HSMODEEN_MASK BITFIELD(3, 3) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_HSSCLH_SHIFT (1 << 16) +#define OMAP4430_HSSCLH_MASK BITFIELD(16, 23) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_HSSCLL_SHIFT (1 << 24) +#define OMAP4430_HSSCLL_MASK BITFIELD(24, 31) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_HWA_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_HWA_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_HWA_MEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_HWA_MEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_HWA_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_HWA_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by RM_MPU_RSTST */ +#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT (1 << 1) +#define OMAP4430_ICECRUSHER_MPU_RST_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_ICECRUSHER_RST1ST_SHIFT (1 << 5) +#define OMAP4430_ICECRUSHER_RST1ST_MASK BITFIELD(5, 5) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_ICECRUSHER_RST2ST_SHIFT (1 << 6) +#define OMAP4430_ICECRUSHER_RST2ST_MASK BITFIELD(6, 6) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT (1 << 5) +#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK BITFIELD(5, 5) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT (1 << 6) +#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK BITFIELD(6, 6) + +/* Used by PRM_RSTST */ +#define OMAP4430_ICEPICK_RST_SHIFT (1 << 9) +#define OMAP4430_ICEPICK_RST_MASK BITFIELD(9, 9) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_INITVDD_SHIFT (1 << 2) +#define OMAP4430_INITVDD_MASK BITFIELD(2, 2) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_INITVOLTAGE_SHIFT (1 << 8) +#define OMAP4430_INITVOLTAGE_MASK BITFIELD(8, 15) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_INTRANSITION_SHIFT (1 << 20) +#define OMAP4430_INTRANSITION_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_IO_EN_SHIFT (1 << 9) +#define OMAP4430_IO_EN_MASK BITFIELD(9, 9) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_IO_ON_STATUS_SHIFT (1 << 5) +#define OMAP4430_IO_ON_STATUS_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_IO_ST_SHIFT (1 << 9) +#define OMAP4430_IO_ST_MASK BITFIELD(9, 9) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOCLK_OVERRIDE_SHIFT (1 << 0) +#define OMAP4430_ISOCLK_OVERRIDE_MASK BITFIELD(0, 0) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOCLK_STATUS_SHIFT (1 << 1) +#define OMAP4430_ISOCLK_STATUS_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOOVR_EXTEND_SHIFT (1 << 4) +#define OMAP4430_ISOOVR_EXTEND_MASK BITFIELD(4, 4) + +/* Used by PRM_IO_COUNT */ +#define OMAP4430_ISO_2_ON_TIME_SHIFT (1 << 0) +#define OMAP4430_ISO_2_ON_TIME_MASK BITFIELD(0, 7) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_L3INIT_PWRSTST */ +#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT (1 << 4) +#define OMAP4430_L3INIT_BANK1_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PM_CORE_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, + * PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, + * PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_LOGICRETSTATE_SHIFT (1 << 2) +#define OMAP4430_LOGICRETSTATE_MASK BITFIELD(2, 2) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_LOGICSTATEST_SHIFT (1 << 2) +#define OMAP4430_LOGICSTATEST_MASK BITFIELD(2, 2) + +/* + * Used by RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, + * RM_WKUP_L4WKUP_CONTEXT, RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, + * RM_WKUP_SYNCTIMER_CONTEXT, RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, + * RM_WKUP_USIM_CONTEXT, RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT, + * RM_EMU_DEBUGSS_CONTEXT, RM_D2D_SAD2D_CONTEXT, RM_D2D_SAD2D_FW_CONTEXT, + * RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, + * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_OCP_WP1_CONTEXT, + * RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT, RM_L3_2_OCMC_RAM_CONTEXT, + * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT, RM_MEMIF_DLL_CONTEXT, + * RM_MEMIF_DLL_H_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, + * RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT, RM_L3INIT_CCPTX_CONTEXT, + * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, + * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT, + * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT, + * RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT, + * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT, + * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT, + * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT, + * RM_ABE_WDT3_CONTEXT, RM_GFX_GFX_CONTEXT, RM_MPU_MPU_CONTEXT, + * RM_CEFUSE_CEFUSE_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, + * RM_ALWON_SR_CORE_CONTEXT, RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, + * RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT, RM_L4PER_ADC_CONTEXT, + * RM_L4PER_DMTIMER10_CONTEXT, RM_L4PER_DMTIMER11_CONTEXT, + * RM_L4PER_DMTIMER2_CONTEXT, RM_L4PER_DMTIMER3_CONTEXT, + * RM_L4PER_DMTIMER4_CONTEXT, RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, + * RM_L4PER_HDQ1W_CONTEXT, RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, + * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, + * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, + * RM_L4PER_MCASP3_CONTEXT, RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, + * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, + * RM_L4PER_MGATE_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, + * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_MSPROHG_CONTEXT, + * RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT, + * RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT + */ +#define OMAP4430_LOSTCONTEXT_DFF_SHIFT (1 << 0) +#define OMAP4430_LOSTCONTEXT_DFF_MASK BITFIELD(0, 0) + +/* + * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT, + * RM_D2D_SAD2D_FW_CONTEXT, RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, + * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT, + * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, + * RM_L4CFG_MAILBOX_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, + * RM_MEMIF_EMIF_2_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT, + * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_L3INIT_HSI_CONTEXT, + * RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_MMC6_CONTEXT, + * RM_L3INIT_USB_HOST_CONTEXT, RM_L3INIT_USB_HOST_FS_CONTEXT, + * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_USB_TLL_CONTEXT, RM_DSS_DSS_CONTEXT, + * RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, RM_L4PER_GPIO4_CONTEXT, + * RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, RM_L4PER_I2C1_CONTEXT, + * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT, + * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4SEC_AES1_CONTEXT, + * RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT, + * RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT + */ +#define OMAP4430_LOSTCONTEXT_RFF_SHIFT (1 << 1) +#define OMAP4430_LOSTCONTEXT_RFF_MASK BITFIELD(1, 1) + +/* Used by RM_ABE_AESS_CONTEXT */ +#define OMAP4430_LOSTMEM_AESSMEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_AESSMEM_MASK BITFIELD(8, 8) + +/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */ +#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CAM_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK BITFIELD(8, 8) + +/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK BITFIELD(9, 9) + +/* Used by RM_L3_2_OCMC_RAM_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK BITFIELD(8, 8) + +/* + * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT, + * RM_SDMA_SDMA_CONTEXT + */ +#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */ +#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_DSS_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_DUCATI_DUCATI_CONTEXT */ +#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK BITFIELD(9, 9) + +/* Used by RM_DUCATI_DUCATI_CONTEXT */ +#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK BITFIELD(8, 8) + +/* Used by RM_EMU_DEBUGSS_CONTEXT */ +#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_EMU_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_GFX_GFX_CONTEXT */ +#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_GFX_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_HWA_MEM_MASK BITFIELD(10, 10) + +/* + * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT, + * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, + * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, RM_L3INIT_SATA_CONTEXT, + * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT, + * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT + */ +#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK BITFIELD(8, 8) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_L1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_MPU_L1_MASK BITFIELD(8, 8) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_L2_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_MPU_L2_MASK BITFIELD(9, 9) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_MPU_RAM_MASK BITFIELD(10, 10) + +/* + * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, + * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, + * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT + */ +#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK BITFIELD(8, 8) + +/* + * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, + * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT + */ +#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_PERIHPMEM_MASK BITFIELD(8, 8) + +/* + * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT, + * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, + * RM_L4SEC_CRYPTODMA_CONTEXT + */ +#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_SL2_CONTEXT */ +#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_SL2_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_TCM1_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_TCM2_MEM_MASK BITFIELD(9, 9) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK BITFIELD(10, 10) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_TESLA_L1_MASK BITFIELD(8, 8) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_TESLA_L2_MASK BITFIELD(9, 9) + +/* Used by RM_WKUP_SARRAM_CONTEXT */ +#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_WKUP_BANK_MASK BITFIELD(8, 8) + +/* + * Used by PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, + * PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, + * PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT (1 << 4) +#define OMAP4430_LOWPOWERSTATECHANGE_MASK BITFIELD(4, 4) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_MEMORYCHANGE_SHIFT (1 << 3) +#define OMAP4430_MEMORYCHANGE_MASK BITFIELD(3, 3) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_READY_SHIFT (1 << 1) +#define OMAP4430_MODEM_READY_MASK BITFIELD(1, 1) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT (1 << 9) +#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK BITFIELD(9, 9) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_SLEEP_ST_SHIFT (1 << 16) +#define OMAP4430_MODEM_SLEEP_ST_MASK BITFIELD(16, 16) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_WAKE_IRQ_SHIFT (1 << 8) +#define OMAP4430_MODEM_WAKE_IRQ_MASK BITFIELD(8, 8) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_MPU_L1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_MPU_L1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_L1_STATEST_SHIFT (1 << 4) +#define OMAP4430_MPU_L1_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L2_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_MPU_L2_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L2_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_MPU_L2_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_L2_STATEST_SHIFT (1 << 6) +#define OMAP4430_MPU_L2_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_RAM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_MPU_RAM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_RAM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_MPU_RAM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_RAM_STATEST_SHIFT (1 << 8) +#define OMAP4430_MPU_RAM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PRM_RSTST */ +#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT (1 << 2) +#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK BITFIELD(2, 2) + +/* Used by PRM_RSTST */ +#define OMAP4430_MPU_WDT_RST_SHIFT (1 << 3) +#define OMAP4430_MPU_WDT_RST_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_L4PER_PWRSTST */ +#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT (1 << 6) +#define OMAP4430_NONRETAINED_BANK_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT (1 << 24) +#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK BITFIELD(24, 25) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT (1 << 12) +#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK BITFIELD(12, 12) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT (1 << 12) +#define OMAP4430_OCP_NRET_BANK_STATEST_MASK BITFIELD(12, 13) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_OFF_SHIFT (1 << 0) +#define OMAP4430_OFF_MASK BITFIELD(0, 7) + +/* Used by PRM_LDO_BANDGAP_CTRL */ +#define OMAP4430_OFF_ENABLE_SHIFT (1 << 0) +#define OMAP4430_OFF_ENABLE_MASK BITFIELD(0, 0) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_ON_SHIFT (1 << 24) +#define OMAP4430_ON_MASK BITFIELD(24, 31) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_ONLP_SHIFT (1 << 16) +#define OMAP4430_ONLP_MASK BITFIELD(16, 23) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_OPP_CHANGE_SHIFT (1 << 2) +#define OMAP4430_OPP_CHANGE_MASK BITFIELD(2, 2) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_OPP_SEL_SHIFT (1 << 0) +#define OMAP4430_OPP_SEL_MASK BITFIELD(0, 1) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_PCHARGECNT_VALUE_SHIFT (1 << 0) +#define OMAP4430_PCHARGECNT_VALUE_MASK BITFIELD(0, 5) + +/* Used by PRM_PSCON_COUNT */ +#define OMAP4430_PCHARGE_TIME_SHIFT (1 << 0) +#define OMAP4430_PCHARGE_TIME_MASK BITFIELD(0, 7) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_PERIPHMEM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_PERIPHMEM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_ABE_PWRSTST */ +#define OMAP4430_PERIPHMEM_STATEST_SHIFT (1 << 8) +#define OMAP4430_PERIPHMEM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PRM_PHASE1_CNDP */ +#define OMAP4430_PHASE1_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE1_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PHASE2A_CNDP */ +#define OMAP4430_PHASE2A_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE2A_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PHASE2B_CNDP */ +#define OMAP4430_PHASE2B_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE2B_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PSCON_COUNT */ +#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT (1 << 8) +#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK BITFIELD(8, 15) + +/* + * Used by PM_EMU_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, + * PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, + * PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, + * PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_POWERSTATE_SHIFT (1 << 0) +#define OMAP4430_POWERSTATE_MASK BITFIELD(0, 1) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_POWERSTATEST_SHIFT (1 << 0) +#define OMAP4430_POWERSTATEST_MASK BITFIELD(0, 1) + +/* Used by PRM_PWRREQCTRL */ +#define OMAP4430_PWRREQ_COND_SHIFT (1 << 0) +#define OMAP4430_PWRREQ_COND_MASK BITFIELD(0, 1) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_CORE_L_SHIFT (1 << 3) +#define OMAP4430_RACEN_VDD_CORE_L_MASK BITFIELD(3, 3) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_IVA_L_SHIFT (1 << 11) +#define OMAP4430_RACEN_VDD_IVA_L_MASK BITFIELD(11, 11) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_MPU_L_SHIFT (1 << 20) +#define OMAP4430_RACEN_VDD_MPU_L_MASK BITFIELD(20, 20) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_CORE_L_SHIFT (1 << 2) +#define OMAP4430_RAC_VDD_CORE_L_MASK BITFIELD(2, 2) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_IVA_L_SHIFT (1 << 10) +#define OMAP4430_RAC_VDD_IVA_L_MASK BITFIELD(10, 10) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_MPU_L_SHIFT (1 << 19) +#define OMAP4430_RAC_VDD_MPU_L_MASK BITFIELD(19, 19) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_DOWN_COUNT_SHIFT (1 << 16) +#define OMAP4430_RAMP_DOWN_COUNT_MASK BITFIELD(16, 21) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT (1 << 24) +#define OMAP4430_RAMP_DOWN_PRESCAL_MASK BITFIELD(24, 25) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_UP_COUNT_SHIFT (1 << 0) +#define OMAP4430_RAMP_UP_COUNT_MASK BITFIELD(0, 5) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_UP_PRESCAL_SHIFT (1 << 8) +#define OMAP4430_RAMP_UP_PRESCAL_MASK BITFIELD(8, 9) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_CORE_L_SHIFT (1 << 1) +#define OMAP4430_RAV_VDD_CORE_L_MASK BITFIELD(1, 1) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_IVA_L_SHIFT (1 << 9) +#define OMAP4430_RAV_VDD_IVA_L_MASK BITFIELD(9, 9) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_MPU_L_SHIFT (1 << 18) +#define OMAP4430_RAV_VDD_MPU_L_MASK BITFIELD(18, 18) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_REGADDR_SHIFT (1 << 8) +#define OMAP4430_REGADDR_MASK BITFIELD(8, 15) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_RET_SHIFT (1 << 8) +#define OMAP4430_RET_MASK BITFIELD(8, 15) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_RETAINED_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_RETAINED_BANK_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_L4PER_PWRSTST */ +#define OMAP4430_RETAINED_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_RETAINED_BANK_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_RETMODE_ENABLE_SHIFT (1 << 0) +#define OMAP4430_RETMODE_ENABLE_MASK BITFIELD(0, 0) + +/* Used by REVISION_PRM */ +#define OMAP4430_REV_SHIFT (1 << 0) +#define OMAP4430_REV_MASK BITFIELD(0, 7) + +/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST1_SHIFT (1 << 0) +#define OMAP4430_RST1_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST1ST_SHIFT (1 << 0) +#define OMAP4430_RST1ST_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST2_SHIFT (1 << 1) +#define OMAP4430_RST2_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST2ST_SHIFT (1 << 1) +#define OMAP4430_RST2ST_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST3_SHIFT (1 << 2) +#define OMAP4430_RST3_MASK BITFIELD(2, 2) + +/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST3ST_SHIFT (1 << 2) +#define OMAP4430_RST3ST_MASK BITFIELD(2, 2) + +/* Used by PRM_RSTTIME */ +#define OMAP4430_RSTTIME1_SHIFT (1 << 0) +#define OMAP4430_RSTTIME1_MASK BITFIELD(0, 9) + +/* Used by PRM_RSTTIME */ +#define OMAP4430_RSTTIME2_SHIFT (1 << 10) +#define OMAP4430_RSTTIME2_MASK BITFIELD(10, 14) + +/* Used by PRM_RSTCTRL */ +#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT (1 << 1) +#define OMAP4430_RST_GLOBAL_COLD_SW_MASK BITFIELD(1, 1) + +/* Used by PRM_RSTCTRL */ +#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT (1 << 0) +#define OMAP4430_RST_GLOBAL_WARM_SW_MASK BITFIELD(0, 0) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_SA_VDD_CORE_L_MASK BITFIELD(0, 0) + +/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT (1 << 0) +#define OMAP4430_SA_VDD_CORE_L_0_6_MASK BITFIELD(0, 6) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_SA_VDD_IVA_L_MASK BITFIELD(8, 8) + +/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT (1 << 8) +#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK BITFIELD(8, 14) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_SA_VDD_MPU_L_MASK BITFIELD(16, 16) + +/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT (1 << 16) +#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK BITFIELD(16, 22) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_SCLH_SHIFT (1 << 0) +#define OMAP4430_SCLH_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_SCLL_SHIFT (1 << 8) +#define OMAP4430_SCLL_MASK BITFIELD(8, 15) + +/* Used by PRM_RSTST */ +#define OMAP4430_SECURE_WDT_RST_SHIFT (1 << 4) +#define OMAP4430_SECURE_WDT_RST_MASK BITFIELD(4, 4) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_SL2_MEM_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_SL2_MEM_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_SL2_MEM_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_SL2_MEM_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_SL2_MEM_STATEST_SHIFT (1 << 6) +#define OMAP4430_SL2_MEM_STATEST_MASK BITFIELD(6, 7) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_SLAVEADDR_SHIFT (1 << 0) +#define OMAP4430_SLAVEADDR_MASK BITFIELD(0, 6) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SLEEP_RBB_SEL_SHIFT (1 << 3) +#define OMAP4430_SLEEP_RBB_SEL_MASK BITFIELD(3, 3) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_SLPCNT_VALUE_SHIFT (1 << 16) +#define OMAP4430_SLPCNT_VALUE_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ +#define OMAP4430_SMPSWAITTIMEMAX_SHIFT (1 << 8) +#define OMAP4430_SMPSWAITTIMEMAX_MASK BITFIELD(8, 23) + +/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ +#define OMAP4430_SMPSWAITTIMEMIN_SHIFT (1 << 8) +#define OMAP4430_SMPSWAITTIMEMIN_MASK BITFIELD(8, 23) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SR2EN_SHIFT (1 << 0) +#define OMAP4430_SR2EN_MASK BITFIELD(0, 0) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_SR2_IN_TRANSITION_SHIFT (1 << 6) +#define OMAP4430_SR2_IN_TRANSITION_MASK BITFIELD(6, 6) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_SR2_STATUS_SHIFT (1 << 3) +#define OMAP4430_SR2_STATUS_MASK BITFIELD(3, 4) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SR2_WTCNT_VALUE_SHIFT (1 << 8) +#define OMAP4430_SR2_WTCNT_VALUE_MASK BITFIELD(8, 15) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_SRAMLDO_STATUS_SHIFT (1 << 8) +#define OMAP4430_SRAMLDO_STATUS_MASK BITFIELD(8, 8) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_SRAM_IN_TRANSITION_SHIFT (1 << 9) +#define OMAP4430_SRAM_IN_TRANSITION_MASK BITFIELD(9, 9) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_SRMODEEN_SHIFT (1 << 4) +#define OMAP4430_SRMODEEN_MASK BITFIELD(4, 4) + +/* Used by PRM_VOLTSETUP_WARMRESET */ +#define OMAP4430_STABLE_COUNT_SHIFT (1 << 0) +#define OMAP4430_STABLE_COUNT_MASK BITFIELD(0, 5) + +/* Used by PRM_VOLTSETUP_WARMRESET */ +#define OMAP4430_STABLE_PRESCAL_SHIFT (1 << 8) +#define OMAP4430_STABLE_PRESCAL_MASK BITFIELD(8, 9) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_TCM1_MEM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_TCM1_MEM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_TCM1_MEM_STATEST_SHIFT (1 << 8) +#define OMAP4430_TCM1_MEM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT (1 << 22) +#define OMAP4430_TCM2_MEM_ONSTATE_MASK BITFIELD(22, 23) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT (1 << 11) +#define OMAP4430_TCM2_MEM_RETSTATE_MASK BITFIELD(11, 11) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_TCM2_MEM_STATEST_SHIFT (1 << 10) +#define OMAP4430_TCM2_MEM_STATEST_MASK BITFIELD(10, 11) + +/* Used by RM_TESLA_RSTST */ +#define OMAP4430_TESLASS_EMU_RSTST_SHIFT (1 << 2) +#define OMAP4430_TESLASS_EMU_RSTST_MASK BITFIELD(2, 2) + +/* Used by RM_TESLA_RSTST */ +#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT (1 << 3) +#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK BITFIELD(3, 3) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_TESLA_EDMA_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_TESLA_EDMA_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_EDMA_STATEST_SHIFT (1 << 8) +#define OMAP4430_TESLA_EDMA_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_TESLA_L1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_TESLA_L1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_L1_STATEST_SHIFT (1 << 4) +#define OMAP4430_TESLA_L1_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L2_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_TESLA_L2_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L2_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_TESLA_L2_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_L2_STATEST_SHIFT (1 << 6) +#define OMAP4430_TESLA_L2_STATEST_MASK BITFIELD(6, 7) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_TIMEOUT_SHIFT (1 << 0) +#define OMAP4430_TIMEOUT_MASK BITFIELD(0, 15) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_TIMEOUTEN_SHIFT (1 << 3) +#define OMAP4430_TIMEOUTEN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_TRANSITION_EN_SHIFT (1 << 8) +#define OMAP4430_TRANSITION_EN_MASK BITFIELD(8, 8) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_TRANSITION_ST_SHIFT (1 << 8) +#define OMAP4430_TRANSITION_ST_MASK BITFIELD(8, 8) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_VALID_SHIFT (1 << 24) +#define OMAP4430_VALID_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_BYPASSACK_EN_SHIFT (1 << 14) +#define OMAP4430_VC_BYPASSACK_EN_MASK BITFIELD(14, 14) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_BYPASSACK_ST_SHIFT (1 << 14) +#define OMAP4430_VC_BYPASSACK_ST_MASK BITFIELD(14, 14) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_IVA_VPACK_EN_SHIFT (1 << 30) +#define OMAP4430_VC_IVA_VPACK_EN_MASK BITFIELD(30, 30) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_IVA_VPACK_ST_SHIFT (1 << 30) +#define OMAP4430_VC_IVA_VPACK_ST_MASK BITFIELD(30, 30) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VC_MPU_VPACK_EN_SHIFT (1 << 6) +#define OMAP4430_VC_MPU_VPACK_EN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VC_MPU_VPACK_ST_SHIFT (1 << 6) +#define OMAP4430_VC_MPU_VPACK_ST_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_RAERR_EN_SHIFT (1 << 12) +#define OMAP4430_VC_RAERR_EN_MASK BITFIELD(12, 12) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_RAERR_ST_SHIFT (1 << 12) +#define OMAP4430_VC_RAERR_ST_MASK BITFIELD(12, 12) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_SAERR_EN_SHIFT (1 << 11) +#define OMAP4430_VC_SAERR_EN_MASK BITFIELD(11, 11) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_SAERR_ST_SHIFT (1 << 11) +#define OMAP4430_VC_SAERR_ST_MASK BITFIELD(11, 11) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_TOERR_EN_SHIFT (1 << 13) +#define OMAP4430_VC_TOERR_EN_MASK BITFIELD(13, 13) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_TOERR_ST_SHIFT (1 << 13) +#define OMAP4430_VC_TOERR_ST_MASK BITFIELD(13, 13) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_VDDMAX_SHIFT (1 << 24) +#define OMAP4430_VDDMAX_MASK BITFIELD(24, 31) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_VDDMIN_SHIFT (1 << 16) +#define OMAP4430_VDDMIN_MASK BITFIELD(16, 23) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT (1 << 12) +#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK BITFIELD(12, 12) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT (1 << 8) +#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK BITFIELD(8, 8) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT (1 << 14) +#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK BITFIELD(14, 14) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_IVA_PRESENCE_SHIFT (1 << 9) +#define OMAP4430_VDD_IVA_PRESENCE_MASK BITFIELD(9, 9) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT (1 << 7) +#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK BITFIELD(7, 7) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT (1 << 13) +#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK BITFIELD(13, 13) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_MPU_PRESENCE_SHIFT (1 << 8) +#define OMAP4430_VDD_MPU_PRESENCE_MASK BITFIELD(8, 8) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT (1 << 6) +#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK BITFIELD(6, 6) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_VOLRA_VDD_CORE_L_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_VOLRA_VDD_IVA_L_MASK BITFIELD(8, 15) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_VOLRA_VDD_MPU_L_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_VPENABLE_SHIFT (1 << 0) +#define OMAP4430_VPENABLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */ +#define OMAP4430_VPINIDLE_SHIFT (1 << 0) +#define OMAP4430_VPINIDLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */ +#define OMAP4430_VPVOLTAGE_SHIFT (1 << 0) +#define OMAP4430_VPVOLTAGE_MASK BITFIELD(0, 7) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT (1 << 20) +#define OMAP4430_VP_CORE_EQVALUE_EN_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT (1 << 20) +#define OMAP4430_VP_CORE_EQVALUE_ST_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT (1 << 18) +#define OMAP4430_VP_CORE_MAXVDD_EN_MASK BITFIELD(18, 18) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT (1 << 18) +#define OMAP4430_VP_CORE_MAXVDD_ST_MASK BITFIELD(18, 18) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT (1 << 17) +#define OMAP4430_VP_CORE_MINVDD_EN_MASK BITFIELD(17, 17) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT (1 << 17) +#define OMAP4430_VP_CORE_MINVDD_ST_MASK BITFIELD(17, 17) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT (1 << 19) +#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK BITFIELD(19, 19) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT (1 << 19) +#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK BITFIELD(19, 19) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT (1 << 16) +#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK BITFIELD(16, 16) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT (1 << 16) +#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK BITFIELD(16, 16) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT (1 << 21) +#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK BITFIELD(21, 21) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT (1 << 21) +#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK BITFIELD(21, 21) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT (1 << 28) +#define OMAP4430_VP_IVA_EQVALUE_EN_MASK BITFIELD(28, 28) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT (1 << 28) +#define OMAP4430_VP_IVA_EQVALUE_ST_MASK BITFIELD(28, 28) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT (1 << 26) +#define OMAP4430_VP_IVA_MAXVDD_EN_MASK BITFIELD(26, 26) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT (1 << 26) +#define OMAP4430_VP_IVA_MAXVDD_ST_MASK BITFIELD(26, 26) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT (1 << 25) +#define OMAP4430_VP_IVA_MINVDD_EN_MASK BITFIELD(25, 25) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT (1 << 25) +#define OMAP4430_VP_IVA_MINVDD_ST_MASK BITFIELD(25, 25) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT (1 << 27) +#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK BITFIELD(27, 27) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT (1 << 27) +#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK BITFIELD(27, 27) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT (1 << 24) +#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT (1 << 24) +#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT (1 << 29) +#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK BITFIELD(29, 29) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT (1 << 29) +#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK BITFIELD(29, 29) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT (1 << 4) +#define OMAP4430_VP_MPU_EQVALUE_EN_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT (1 << 4) +#define OMAP4430_VP_MPU_EQVALUE_ST_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT (1 << 2) +#define OMAP4430_VP_MPU_MAXVDD_EN_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT (1 << 2) +#define OMAP4430_VP_MPU_MAXVDD_ST_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT (1 << 1) +#define OMAP4430_VP_MPU_MINVDD_EN_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT (1 << 1) +#define OMAP4430_VP_MPU_MINVDD_ST_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT (1 << 3) +#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT (1 << 3) +#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT (1 << 0) +#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT (1 << 0) +#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT (1 << 5) +#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT (1 << 5) +#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK BITFIELD(5, 5) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_VSETUPCNT_VALUE_SHIFT (1 << 8) +#define OMAP4430_VSETUPCNT_VALUE_MASK BITFIELD(8, 15) + +/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ +#define OMAP4430_VSTEPMAX_SHIFT (1 << 0) +#define OMAP4430_VSTEPMAX_MASK BITFIELD(0, 7) + +/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ +#define OMAP4430_VSTEPMIN_SHIFT (1 << 0) +#define OMAP4430_VSTEPMIN_MASK BITFIELD(0, 7) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_WAKE_MODEM_SHIFT (1 << 0) +#define OMAP4430_WAKE_MODEM_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DISPC_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_DMTIMER10_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER11_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER11_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER2_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER3_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER3_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER4_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER4_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER9_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER9_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT (1 << 5) +#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK BITFIELD(5, 5) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT (1 << 4) +#define OMAP4430_WKUPDEP_DSI1_MPU_MASK BITFIELD(4, 4) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT (1 << 9) +#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK BITFIELD(9, 9) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT (1 << 8) +#define OMAP4430_WKUPDEP_DSI2_MPU_MASK BITFIELD(8, 8) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT (1 << 11) +#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK BITFIELD(11, 11) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT (1 << 10) +#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK BITFIELD(10, 10) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO3_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO3_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO4_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO4_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO5_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO5_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO6_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO6_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT (1 << 19) +#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK BITFIELD(19, 19) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT (1 << 13) +#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK BITFIELD(13, 13) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT (1 << 12) +#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK BITFIELD(12, 12) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT (1 << 14) +#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK BITFIELD(14, 14) + +/* Used by PM_L4PER_HECC1_WKDEP */ +#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HECC1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_HECC2_WKDEP */ +#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HECC2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C5_WKDEP */ +#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C5_WKDEP */ +#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_KEYBOARD_WKDEP */ +#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI3_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI3_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI4_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI4_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC6_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_PCIESS_WKDEP */ +#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_PCIESS_WKDEP */ +#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_WKUP_RTC_WKDEP */ +#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_RTC_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_SATA_WKDEP */ +#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SATA_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_SATA_WKDEP */ +#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SATA_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ALWON_SR_CORE_WKDEP */ +#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_ALWON_SR_CORE_WKDEP */ +#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ALWON_SR_IVA_WKDEP */ +#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_ALWON_SR_IVA_WKDEP */ +#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ALWON_SR_MPU_WKDEP */ +#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_TIMER12_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_TIMER1_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER5_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER5_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER6_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER6_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER7_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER7_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER8_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER8_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_UART1_WKDEP */ +#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART1_WKDEP */ +#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART2_WKDEP */ +#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART2_WKDEP */ +#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_UART3_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_UART4_WKDEP */ +#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART4_WKDEP */ +#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_UNIPRO1_WKDEP */ +#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_UNIPRO1_WKDEP */ +#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_HOST_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_HOST_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_OTG_WKDEP */ +#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_OTG_WKDEP */ +#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_TLL_WKDEP */ +#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_TLL_WKDEP */ +#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_USIM_WKDEP */ +#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USIM_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_USIM_WKDEP */ +#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_USIM_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_WKUP_WDT2_WKDEP */ +#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_WKUP_WDT2_WKDEP */ +#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_WDT2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_WDT3_WKDEP */ +#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_WDT3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT (1 << 8) +#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK BITFIELD(8, 8) + +/* Used by PM_L3INIT_XHPI_WKDEP */ +#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_WUCLK_CTRL_SHIFT (1 << 8) +#define OMAP4430_WUCLK_CTRL_MASK BITFIELD(8, 8) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_WUCLK_STATUS_SHIFT (1 << 9) +#define OMAP4430_WUCLK_STATUS_MASK BITFIELD(9, 9) +#endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index a117f853ea39..ea050ce188a7 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -4,8 +4,8 @@ /* * OMAP2/3 Power/Reset Management (PRM) register definitions * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation * * Written by Paul Walmsley * @@ -22,6 +22,10 @@ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) +#define OMAP44XX_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg)) + +#include "prm44xx.h" /* * Architecture-specific global PRM registers diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h new file mode 100644 index 000000000000..89be97f0589d --- /dev/null +++ b/arch/arm/mach-omap2/prm44xx.h @@ -0,0 +1,411 @@ +/* + * OMAP44xx PRM instance offset macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H + + +/* PRM */ + + +/* PRM.OCP_SOCKET_PRM register offsets */ +#define OMAP4430_REVISION_PRM OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_PRM_IRQSTATUS_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010) +#define OMAP4430_PRM_IRQSTATUS_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014) +#define OMAP4430_PRM_IRQENABLE_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018) +#define OMAP4430_PRM_IRQENABLE_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c) +#define OMAP4430_PRM_IRQSTATUS_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020) +#define OMAP4430_PRM_IRQENABLE_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028) +#define OMAP4430_PRM_IRQSTATUS_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030) +#define OMAP4430_PRM_IRQENABLE_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038) +#define OMAP4430_PRM_PRM_PROFILING_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040) + +/* PRM.CKGEN_PRM register offsets */ +#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_DPLL_SYS_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004) +#define OMAP4430_CM_L4_WKUP_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_ABE_PLL_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c) +#define OMAP4430_CM_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010) + +/* PRM.MPU_PRM register offsets */ +#define OMAP4430_PM_MPU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000) +#define OMAP4430_PM_MPU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004) +#define OMAP4430_RM_MPU_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014) +#define OMAP4430_RM_MPU_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024) + +/* PRM.TESLA_PRM register offsets */ +#define OMAP4430_PM_TESLA_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000) +#define OMAP4430_PM_TESLA_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004) +#define OMAP4430_RM_TESLA_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010) +#define OMAP4430_RM_TESLA_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014) +#define OMAP4430_RM_TESLA_TESLA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024) + +/* PRM.ABE_PRM register offsets */ +#define OMAP4430_PM_ABE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000) +#define OMAP4430_PM_ABE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004) +#define OMAP4430_RM_ABE_AESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c) +#define OMAP4430_PM_ABE_PDM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030) +#define OMAP4430_RM_ABE_PDM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034) +#define OMAP4430_PM_ABE_DMIC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038) +#define OMAP4430_RM_ABE_DMIC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c) +#define OMAP4430_PM_ABE_MCASP_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040) +#define OMAP4430_RM_ABE_MCASP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044) +#define OMAP4430_PM_ABE_MCBSP1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048) +#define OMAP4430_RM_ABE_MCBSP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c) +#define OMAP4430_PM_ABE_MCBSP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050) +#define OMAP4430_RM_ABE_MCBSP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054) +#define OMAP4430_PM_ABE_MCBSP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058) +#define OMAP4430_RM_ABE_MCBSP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c) +#define OMAP4430_PM_ABE_SLIMBUS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060) +#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064) +#define OMAP4430_PM_ABE_TIMER5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068) +#define OMAP4430_RM_ABE_TIMER5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c) +#define OMAP4430_PM_ABE_TIMER6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070) +#define OMAP4430_RM_ABE_TIMER6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074) +#define OMAP4430_PM_ABE_TIMER7_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078) +#define OMAP4430_RM_ABE_TIMER7_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c) +#define OMAP4430_PM_ABE_TIMER8_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080) +#define OMAP4430_RM_ABE_TIMER8_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084) +#define OMAP4430_PM_ABE_WDT3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088) +#define OMAP4430_RM_ABE_WDT3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c) + +/* PRM.ALWAYS_ON_PRM register offsets */ +#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024) +#define OMAP4430_PM_ALWON_SR_MPU_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028) +#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c) +#define OMAP4430_PM_ALWON_SR_IVA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030) +#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034) +#define OMAP4430_PM_ALWON_SR_CORE_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038) +#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c) + +/* PRM.CORE_PRM register offsets */ +#define OMAP4430_PM_CORE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000) +#define OMAP4430_PM_CORE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004) +#define OMAP4430_RM_L3_1_L3_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024) +#define OMAP4430_RM_L3_2_L3_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124) +#define OMAP4430_RM_L3_2_GPMC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c) +#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134) +#define OMAP4430_RM_DUCATI_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210) +#define OMAP4430_RM_DUCATI_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214) +#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224) +#define OMAP4430_RM_SDMA_SDMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324) +#define OMAP4430_RM_MEMIF_DMM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424) +#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c) +#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434) +#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c) +#define OMAP4430_RM_MEMIF_DLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444) +#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454) +#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c) +#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464) +#define OMAP4430_RM_D2D_SAD2D_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524) +#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c) +#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534) +#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624) +#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c) +#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634) +#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c) +#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724) +#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c) +#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744) + +/* PRM.IVAHD_PRM register offsets */ +#define OMAP4430_PM_IVAHD_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000) +#define OMAP4430_PM_IVAHD_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004) +#define OMAP4430_RM_IVAHD_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010) +#define OMAP4430_RM_IVAHD_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014) +#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024) +#define OMAP4430_RM_IVAHD_SL2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c) + +/* PRM.CAM_PRM register offsets */ +#define OMAP4430_PM_CAM_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000) +#define OMAP4430_PM_CAM_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004) +#define OMAP4430_RM_CAM_ISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024) +#define OMAP4430_RM_CAM_FDIF_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c) + +/* PRM.DSS_PRM register offsets */ +#define OMAP4430_PM_DSS_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000) +#define OMAP4430_PM_DSS_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004) +#define OMAP4430_PM_DSS_DSS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020) +#define OMAP4430_RM_DSS_DSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024) +#define OMAP4430_RM_DSS_DEISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c) + +/* PRM.GFX_PRM register offsets */ +#define OMAP4430_PM_GFX_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000) +#define OMAP4430_PM_GFX_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004) +#define OMAP4430_RM_GFX_GFX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024) + +/* PRM.L3INIT_PRM register offsets */ +#define OMAP4430_PM_L3INIT_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000) +#define OMAP4430_PM_L3INIT_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004) +#define OMAP4430_PM_L3INIT_MMC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028) +#define OMAP4430_RM_L3INIT_MMC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c) +#define OMAP4430_PM_L3INIT_MMC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030) +#define OMAP4430_RM_L3INIT_MMC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034) +#define OMAP4430_PM_L3INIT_HSI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038) +#define OMAP4430_RM_L3INIT_HSI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c) +#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040) +#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044) +#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058) +#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c) +#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060) +#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064) +#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068) +#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c) +#define OMAP4430_RM_L3INIT_P1500_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c) +#define OMAP4430_RM_L3INIT_EMAC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084) +#define OMAP4430_PM_L3INIT_SATA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088) +#define OMAP4430_RM_L3INIT_SATA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c) +#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094) +#define OMAP4430_PM_L3INIT_PCIESS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098) +#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c) +#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac) +#define OMAP4430_PM_L3INIT_XHPI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0) +#define OMAP4430_RM_L3INIT_XHPI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4) +#define OMAP4430_PM_L3INIT_MMC6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8) +#define OMAP4430_RM_L3INIT_MMC6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc) +#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0) +#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4) +#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4) + +/* PRM.L4PER_PRM register offsets */ +#define OMAP4430_PM_L4PER_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000) +#define OMAP4430_PM_L4PER_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004) +#define OMAP4430_RM_L4PER_ADC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024) +#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028) +#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c) +#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030) +#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034) +#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038) +#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c) +#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040) +#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044) +#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048) +#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c) +#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050) +#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054) +#define OMAP4430_RM_L4PER_ELM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c) +#define OMAP4430_PM_L4PER_GPIO2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060) +#define OMAP4430_RM_L4PER_GPIO2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064) +#define OMAP4430_PM_L4PER_GPIO3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068) +#define OMAP4430_RM_L4PER_GPIO3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c) +#define OMAP4430_PM_L4PER_GPIO4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070) +#define OMAP4430_RM_L4PER_GPIO4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074) +#define OMAP4430_PM_L4PER_GPIO5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078) +#define OMAP4430_RM_L4PER_GPIO5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c) +#define OMAP4430_PM_L4PER_GPIO6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080) +#define OMAP4430_RM_L4PER_GPIO6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084) +#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c) +#define OMAP4430_PM_L4PER_HECC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090) +#define OMAP4430_RM_L4PER_HECC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094) +#define OMAP4430_PM_L4PER_HECC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098) +#define OMAP4430_RM_L4PER_HECC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c) +#define OMAP4430_PM_L4PER_I2C1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0) +#define OMAP4430_RM_L4PER_I2C1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4) +#define OMAP4430_PM_L4PER_I2C2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8) +#define OMAP4430_RM_L4PER_I2C2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac) +#define OMAP4430_PM_L4PER_I2C3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0) +#define OMAP4430_RM_L4PER_I2C3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4) +#define OMAP4430_PM_L4PER_I2C4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8) +#define OMAP4430_RM_L4PER_I2C4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc) +#define OMAP4430_RM_L4PER_L4_PER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0) +#define OMAP4430_PM_L4PER_MCASP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0) +#define OMAP4430_RM_L4PER_MCASP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4) +#define OMAP4430_PM_L4PER_MCASP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8) +#define OMAP4430_RM_L4PER_MCASP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc) +#define OMAP4430_PM_L4PER_MCBSP4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0) +#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4) +#define OMAP4430_RM_L4PER_MGATE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec) +#define OMAP4430_PM_L4PER_MCSPI1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0) +#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4) +#define OMAP4430_PM_L4PER_MCSPI2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8) +#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc) +#define OMAP4430_PM_L4PER_MCSPI3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100) +#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104) +#define OMAP4430_PM_L4PER_MCSPI4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108) +#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c) +#define OMAP4430_PM_L4PER_MMCSD3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120) +#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124) +#define OMAP4430_PM_L4PER_MMCSD4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128) +#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c) +#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134) +#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138) +#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c) +#define OMAP4430_PM_L4PER_UART1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140) +#define OMAP4430_RM_L4PER_UART1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144) +#define OMAP4430_PM_L4PER_UART2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148) +#define OMAP4430_RM_L4PER_UART2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c) +#define OMAP4430_PM_L4PER_UART3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150) +#define OMAP4430_RM_L4PER_UART3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154) +#define OMAP4430_PM_L4PER_UART4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158) +#define OMAP4430_RM_L4PER_UART4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c) +#define OMAP4430_PM_L4PER_MMCSD5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160) +#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164) +#define OMAP4430_PM_L4PER_I2C5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168) +#define OMAP4430_RM_L4PER_I2C5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c) +#define OMAP4430_RM_L4SEC_AES1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4) +#define OMAP4430_RM_L4SEC_AES2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac) +#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4) +#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc) +#define OMAP4430_RM_L4SEC_RNG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4) +#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc) +#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc) + +/* PRM.CEFUSE_PRM register offsets */ +#define OMAP4430_PM_CEFUSE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000) +#define OMAP4430_PM_CEFUSE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004) +#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024) + +/* PRM.WKUP_PRM register offsets */ +#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024) +#define OMAP4430_RM_WKUP_WDT1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c) +#define OMAP4430_PM_WKUP_WDT2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030) +#define OMAP4430_RM_WKUP_WDT2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034) +#define OMAP4430_PM_WKUP_GPIO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038) +#define OMAP4430_RM_WKUP_GPIO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c) +#define OMAP4430_PM_WKUP_TIMER1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040) +#define OMAP4430_RM_WKUP_TIMER1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044) +#define OMAP4430_PM_WKUP_TIMER12_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048) +#define OMAP4430_RM_WKUP_TIMER12_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c) +#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054) +#define OMAP4430_PM_WKUP_USIM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058) +#define OMAP4430_RM_WKUP_USIM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c) +#define OMAP4430_RM_WKUP_SARRAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064) +#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078) +#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c) +#define OMAP4430_PM_WKUP_RTC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080) +#define OMAP4430_RM_WKUP_RTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084) + +/* PRM.WKUP_CM register offsets */ +#define OMAP4430_CM_WKUP_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000) +#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020) +#define OMAP4430_CM_WKUP_WDT1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028) +#define OMAP4430_CM_WKUP_WDT2_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030) +#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038) +#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040) +#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048) +#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050) +#define OMAP4430_CM_WKUP_USIM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058) +#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060) +#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078) +#define OMAP4430_CM_WKUP_RTC_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080) +#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088) + +/* PRM.EMU_PRM register offsets */ +#define OMAP4430_PM_EMU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000) +#define OMAP4430_PM_EMU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004) +#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024) + +/* PRM.EMU_CM register offsets */ +#define OMAP4430_CM_EMU_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000) +#define OMAP4430_CM_EMU_DYNAMICDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008) +#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020) + +/* PRM.DEVICE_PRM register offsets */ +#define OMAP4430_PRM_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000) +#define OMAP4430_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004) +#define OMAP4430_PRM_RSTTIME OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008) +#define OMAP4430_PRM_CLKREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c) +#define OMAP4430_PRM_VOLTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010) +#define OMAP4430_PRM_PWRREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014) +#define OMAP4430_PRM_PSCON_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018) +#define OMAP4430_PRM_IO_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c) +#define OMAP4430_PRM_IO_PMCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020) +#define OMAP4430_PRM_VOLTSETUP_WARMRESET OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024) +#define OMAP4430_PRM_VOLTSETUP_CORE_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028) +#define OMAP4430_PRM_VOLTSETUP_MPU_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c) +#define OMAP4430_PRM_VOLTSETUP_IVA_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030) +#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034) +#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038) +#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c) +#define OMAP4430_PRM_VP_CORE_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040) +#define OMAP4430_PRM_VP_CORE_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044) +#define OMAP4430_PRM_VP_CORE_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048) +#define OMAP4430_PRM_VP_CORE_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c) +#define OMAP4430_PRM_VP_CORE_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050) +#define OMAP4430_PRM_VP_CORE_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054) +#define OMAP4430_PRM_VP_MPU_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058) +#define OMAP4430_PRM_VP_MPU_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c) +#define OMAP4430_PRM_VP_MPU_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060) +#define OMAP4430_PRM_VP_MPU_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064) +#define OMAP4430_PRM_VP_MPU_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068) +#define OMAP4430_PRM_VP_MPU_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c) +#define OMAP4430_PRM_VP_IVA_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070) +#define OMAP4430_PRM_VP_IVA_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074) +#define OMAP4430_PRM_VP_IVA_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078) +#define OMAP4430_PRM_VP_IVA_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c) +#define OMAP4430_PRM_VP_IVA_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080) +#define OMAP4430_PRM_VP_IVA_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084) +#define OMAP4430_PRM_VC_SMPS_SA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088) +#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c) +#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c) +#define OMAP4430_PRM_VC_VAL_BYPASS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0) +#define OMAP4430_PRM_VC_CFG_CHANNEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4) +#define OMAP4430_PRM_VC_CFG_I2C_MODE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8) +#define OMAP4430_PRM_VC_CFG_I2C_CLK OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac) +#define OMAP4430_PRM_SRAM_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0) +#define OMAP4430_PRM_SRAM_WKUP_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4) +#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8) +#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc) +#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0) +#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4) +#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8) +#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc) +#define OMAP4430_PRM_LDO_ABB_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0) +#define OMAP4430_PRM_LDO_ABB_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4) +#define OMAP4430_PRM_LDO_ABB_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8) +#define OMAP4430_PRM_LDO_ABB_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc) +#define OMAP4430_PRM_LDO_BANDGAP_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0) +#define OMAP4430_PRM_DEVICE_OFF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4) +#define OMAP4430_PRM_PHASE1_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8) +#define OMAP4430_PRM_PHASE2A_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec) +#define OMAP4430_PRM_PHASE2B_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0) +#define OMAP4430_PRM_MODEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4) + +/* CHIRON_PRCM */ + + +/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */ +#define OMAP4430_REVISION_PRCM OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000) + +/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */ +#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000) + +/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */ +#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000) +#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004) +#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008) +#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c) +#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010) +#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014) +#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018) + +/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */ +#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000) +#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004) +#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008) +#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c) +#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010) +#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014) +#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018) +#endif diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c index 9a592199321c..cbfbd142e946 100644 --- a/arch/arm/mach-omap2/sdrc.c +++ b/arch/arm/mach-omap2/sdrc.c @@ -160,3 +160,19 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0, sdrc_write_reg(l, SDRC_POWER); omap2_sms_save_context(); } + +void omap2_sms_write_rot_control(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_CONTROL(ctx)); +} + +void omap2_sms_write_rot_size(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_SIZE(ctx)); +} + +void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx) +{ + sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx)); +} + diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 48207b018989..68f57bb67fc5 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -18,6 +18,9 @@ #include <plat/sdrc.h> #ifndef __ASSEMBLER__ + +#include <linux/io.h> + extern void __iomem *omap2_sdrc_base; extern void __iomem *omap2_sms_base; @@ -56,4 +59,20 @@ static inline u32 sms_read_reg(u16 reg) OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) #endif /* __ASSEMBLER__ */ +/* Minimum frequency that the SDRC DLL can lock at */ +#define MIN_SDRC_DLL_LOCK_FREQ 83000000 + +/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */ +#define SDRC_MPURATE_SCALE 8 + +/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */ +#define SDRC_MPURATE_BASE_SHIFT 9 + +/* + * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at + * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize + */ +#define SDRC_MPURATE_LOOPS 96 + + #endif diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 2e17b57f5b23..39b797bc14d6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -33,6 +33,7 @@ #include "pm.h" #include "prm-regbits-34xx.h" +#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ #define DEFAULT_TIMEOUT (5 * HZ) @@ -572,6 +573,23 @@ static struct omap_uart_state omap_uart[] = { #endif }; +/* + * Override the default 8250 read handler: mem_serial_in() + * Empty RX fifo read causes an abort on omap3630 and omap4 + * This function makes sure that an empty rx fifo is not read on these silicons + * (OMAP1/2/3430 are not affected) + */ +static unsigned int serial_in_override(struct uart_port *up, int offset) +{ + if (UART_RX == offset) { + unsigned int lsr; + lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR); + if (!(lsr & UART_LSR_DR)) + return -EPERM; + } + return serial_read_reg(omap_uart[up->line].p, offset); +} + void __init omap_serial_early_init(void) { int i; @@ -631,24 +649,64 @@ void __init omap_serial_early_init(void) } } -void __init omap_serial_init(void) +/** + * omap_serial_init_port() - initialize single serial port + * @port: serial port number (0-3) + * + * This function initialies serial driver for given @port only. + * Platforms can call this function instead of omap_serial_init() + * if they don't plan to use all available UARTs as serial ports. + * + * Don't mix calls to omap_serial_init_port() and omap_serial_init(), + * use only one of the two. + */ +void __init omap_serial_init_port(int port) { - int i; + struct omap_uart_state *uart; + struct platform_device *pdev; + struct device *dev; - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { - struct omap_uart_state *uart = &omap_uart[i]; - struct platform_device *pdev = &uart->pdev; - struct device *dev = &pdev->dev; + BUG_ON(port < 0); + BUG_ON(port >= ARRAY_SIZE(omap_uart)); - omap_uart_reset(uart); - omap_uart_idle_init(uart); + uart = &omap_uart[port]; + pdev = &uart->pdev; + dev = &pdev->dev; - if (WARN_ON(platform_device_register(pdev))) - continue; - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(dev, true); - DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); - } + omap_uart_reset(uart); + omap_uart_idle_init(uart); + + if (WARN_ON(platform_device_register(pdev))) + return; + + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); } + + /* omap44xx: Never read empty UART fifo + * omap3xxx: Never read empty UART fifo on UARTs + * with IP rev >=0x52 + */ + if (cpu_is_omap44xx()) + uart->p->serial_in = serial_in_override; + else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) + uart->p->serial_in = serial_in_override; +} + +/** + * omap_serial_init() - intialize all supported serial ports + * + * Initializes all available UARTs as serial ports. Platforms + * can call this function when they want to have default behaviour + * for serial ports (e.g initialize them all as serial ports). + */ +void __init omap_serial_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(omap_uart); i++) + omap_serial_init_port(i); } diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 82aa4a3d160c..de99ba2a57ab 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -91,8 +91,19 @@ * new SDRC_ACTIM_CTRL_B_1 register contents * new SDRC_MR_1 register value * - * If the param SDRC_RFR_CTRL_1 is 0, the parameters - * are not programmed into the SDRC CS1 registers + * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into + * the SDRC CS1 registers + * + * NOTE: This code no longer attempts to program the SDRC AC timing and MR + * registers. This is because the code currently cannot ensure that all + * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the + * SDRAM when the registers are written. If the registers are changed while + * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC + * may enter an unpredictable state. In the future, the intent is to + * re-enable this code in cases where we can ensure that no initiators are + * touching the SDRAM. Until that time, users who know that their use case + * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING + * option. */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack @@ -219,6 +230,7 @@ configure_sdrc: ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM str r12, [r11] @ store +#ifdef CONFIG_OMAP3_SDRC_AC_TIMING ldr r12, omap_sdrc_actim_ctrl_a_0_val ldr r11, omap3_sdrc_actim_ctrl_a_0 str r12, [r11] @@ -228,11 +240,13 @@ configure_sdrc: ldr r12, omap_sdrc_mr_0_val ldr r11, omap3_sdrc_mr_0 str r12, [r11] +#endif ldr r12, omap_sdrc_rfr_ctrl_1_val cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, beq skip_cs1_prog @ do not program cs1 params ldr r11, omap3_sdrc_rfr_ctrl_1 str r12, [r11] +#ifdef CONFIG_OMAP3_SDRC_AC_TIMING ldr r12, omap_sdrc_actim_ctrl_a_1_val ldr r11, omap3_sdrc_actim_ctrl_a_1 str r12, [r11] @@ -242,6 +256,7 @@ configure_sdrc: ldr r12, omap_sdrc_mr_1_val ldr r11, omap3_sdrc_mr_1 str r12, [r11] +#endif skip_cs1_prog: ldr r12, [r11] @ posted-write barrier for SDRC bx lr diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index e448abd5ec5d..f1df873d59db 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -27,6 +27,8 @@ #include <mach/irqs.h> #include <plat/usb.h> +#include "mux.h" + #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) static struct resource ehci_resources[] = { @@ -72,32 +74,44 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) { switch (port_mode[0]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); - omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); - omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); - omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); - omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); - omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); - omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); - omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); - omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); + omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); - omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); - omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); - omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); - omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); - omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); - omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); - omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); - omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); + omap_mux_init_signal("hsusb1_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb1_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -107,32 +121,52 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) switch (port_mode[1]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); - omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); - omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); - omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); - omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); - omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); - omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); - omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); - omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); - omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); - omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); + omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); - omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); - omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); - omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); - omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); - omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); - omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); - omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); - omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); - omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); - omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); + omap_mux_init_signal("hsusb2_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb2_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -145,18 +179,30 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); - omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); - omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); - omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); - omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); - omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); - omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); - omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); - omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); - omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); - omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); - omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); + omap_mux_init_signal("hsusb3_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb3_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index d89c6adbe8bc..e6d8e10ae5d1 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -63,6 +63,15 @@ config ARCH_VIPER select HAVE_PWM select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS + select ARCOM_PCMCIA + +config MACH_ARCOM_ZEUS + bool "Arcom/Eurotech ZEUS SBC" + select PXA27x + select ISA + select PXA_HAVE_BOARD_IRQS + select PXA_HAVE_ISA_IRQS + select ARCOM_PCMCIA config MACH_BALLOON3 bool "Balloon 3 board" @@ -179,6 +188,11 @@ config MACH_TRIZEPS_ANY endchoice +config ARCOM_PCMCIA + bool + help + Generic option for Arcom Viper/Zeus PCMCIA + config TRIZEPS_PCMCIA bool help diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index b5d29e60a341..f64afda7e6f6 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_MACH_SAAR) += saar.o # 3rd Party Dev Platforms obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_ARCH_VIPER) += viper.o +obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o obj-$(CONFIG_MACH_BALLOON3) += balloon3.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 1c0de808b54d..c8a01bc85fde 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -497,16 +497,15 @@ static int em_x270_usb_hub_init(void) goto err_free_vbus_gpio; /* USB Hub power-on and reset */ - gpio_direction_output(usb_hub_reset, 0); + gpio_direction_output(usb_hub_reset, 1); + gpio_direction_output(GPIO9_USB_VBUS_EN, 0); regulator_enable(em_x270_usb_ldo); - gpio_set_value(usb_hub_reset, 1); gpio_set_value(usb_hub_reset, 0); + gpio_set_value(usb_hub_reset, 1); regulator_disable(em_x270_usb_ldo); regulator_enable(em_x270_usb_ldo); - gpio_set_value(usb_hub_reset, 1); - - /* enable VBUS */ - gpio_direction_output(GPIO9_USB_VBUS_EN, 1); + gpio_set_value(usb_hub_reset, 0); + gpio_set_value(GPIO9_USB_VBUS_EN, 1); return 0; diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h new file mode 100644 index 000000000000..d428be4db44c --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h @@ -0,0 +1,11 @@ +#ifndef __ARCOM_PCMCIA_H +#define __ARCOM_PCMCIA_H + +struct arcom_pcmcia_pdata { + int cd_gpio; + int rdy_gpio; + int pwr_gpio; + void (*reset)(int state); +}; + +#endif diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h index 10988c270ca3..5f5fbf1f6489 100644 --- a/arch/arm/mach-pxa/include/mach/viper.h +++ b/arch/arm/mach-pxa/include/mach/viper.h @@ -85,8 +85,6 @@ /* Interrupt and Configuration Register (VIPER_ICR) */ /* This is a write only register. Only CF_RST is used under Linux */ -extern void viper_cf_rst(int state); - #define VIPER_ICR_RETRIG (1 << 0) #define VIPER_ICR_AUTO_CLR (1 << 1) #define VIPER_ICR_R_DIS (1 << 2) diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h new file mode 100644 index 000000000000..c387046d2f28 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/zeus.h @@ -0,0 +1,82 @@ +/* + * arch/arm/mach-pxa/include/mach/zeus.h + * + * Author: David Vrabel + * Created: Sept 28, 2005 + * Copyright: Arcom Control Systems Ltd. + * + * Maintained by: Marc Zyngier <maz@misterjones.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _MACH_ZEUS_H +#define _MACH_ZEUS_H + +/* Physical addresses */ +#define ZEUS_FLASH_PHYS PXA_CS0_PHYS +#define ZEUS_ETH0_PHYS PXA_CS1_PHYS +#define ZEUS_ETH1_PHYS PXA_CS2_PHYS +#define ZEUS_CPLD_PHYS (PXA_CS4_PHYS+0x2000000) +#define ZEUS_SRAM_PHYS PXA_CS5_PHYS +#define ZEUS_PC104IO_PHYS (0x30000000) + +#define ZEUS_CPLD_VERSION_PHYS (ZEUS_CPLD_PHYS + 0x00000000) +#define ZEUS_CPLD_ISA_IRQ_PHYS (ZEUS_CPLD_PHYS + 0x00800000) +#define ZEUS_CPLD_CONTROL_PHYS (ZEUS_CPLD_PHYS + 0x01000000) +#define ZEUS_CPLD_EXTWDOG_PHYS (ZEUS_CPLD_PHYS + 0x01800000) + +/* GPIOs */ +#define ZEUS_AC97_GPIO 0 +#define ZEUS_WAKEUP_GPIO 1 +#define ZEUS_UARTA_GPIO 9 +#define ZEUS_UARTB_GPIO 10 +#define ZEUS_UARTC_GPIO 12 +#define ZEUS_UARTD_GPIO 11 +#define ZEUS_ETH0_GPIO 14 +#define ZEUS_ISA_GPIO 17 +#define ZEUS_BKLEN_GPIO 19 +#define ZEUS_USB2_PWREN_GPIO 22 +#define ZEUS_PTT_GPIO 27 +#define ZEUS_CF_CD_GPIO 35 +#define ZEUS_MMC_WP_GPIO 52 +#define ZEUS_MMC_CD_GPIO 53 +#define ZEUS_EXTGPIO_GPIO 91 +#define ZEUS_CF_PWEN_GPIO 97 +#define ZEUS_CF_RDY_GPIO 99 +#define ZEUS_LCD_EN_GPIO 101 +#define ZEUS_ETH1_GPIO 113 +#define ZEUS_CAN_GPIO 116 + +#define ZEUS_EXT0_GPIO_BASE 128 +#define ZEUS_EXT1_GPIO_BASE 160 +#define ZEUS_USER_GPIO_BASE 192 + +#define ZEUS_EXT0_GPIO(x) (ZEUS_EXT0_GPIO_BASE + (x)) +#define ZEUS_EXT1_GPIO(x) (ZEUS_EXT1_GPIO_BASE + (x)) +#define ZEUS_USER_GPIO(x) (ZEUS_USER_GPIO_BASE + (x)) + +/* + * CPLD registers: + * Only 4 registers, but spreaded over a 32MB address space. + * Be gentle, and remap that over 32kB... + */ + +#define ZEUS_CPLD (0xf0000000) +#define ZEUS_CPLD_VERSION (ZEUS_CPLD + 0x0000) +#define ZEUS_CPLD_ISA_IRQ (ZEUS_CPLD + 0x1000) +#define ZEUS_CPLD_CONTROL (ZEUS_CPLD + 0x2000) +#define ZEUS_CPLD_EXTWDOG (ZEUS_CPLD + 0x3000) + +/* CPLD register bits */ +#define ZEUS_CPLD_CONTROL_CF_RST 0x01 + +#define ZEUS_PC104IO (0xf1000000) + +#define ZEUS_SRAM_SIZE (256 * 1024) + +#endif + + diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index cf0d71b7797e..5352b4e5a7dd 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -47,6 +47,7 @@ #include <mach/pxafb.h> #include <plat/i2c.h> #include <mach/regs-uart.h> +#include <mach/arcom-pcmcia.h> #include <mach/viper.h> #include <asm/setup.h> @@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit) } /* This function is used from the pcmcia module to reset the CF */ -void viper_cf_rst(int state) +static void viper_cf_reset(int state) { if (state) viper_icr_set_bit(VIPER_ICR_CF_RST); else viper_icr_clear_bit(VIPER_ICR_CF_RST); } -EXPORT_SYMBOL(viper_cf_rst); + +static struct arcom_pcmcia_pdata viper_pcmcia_info = { + .cd_gpio = VIPER_CF_CD_GPIO, + .rdy_gpio = VIPER_CF_RDY_GPIO, + .pwr_gpio = VIPER_CF_POWER_GPIO, + .reset = viper_cf_reset, +}; + +static struct platform_device viper_pcmcia_device = { + .name = "viper-pcmcia", + .id = -1, + .dev = { + .platform_data = &viper_pcmcia_info, + }, +}; /* * The CPLD version register was not present on VIPER boards prior to @@ -685,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = { &viper_mtd_devices[0], &viper_mtd_devices[1], &viper_backlight_device, + &viper_pcmcia_device, }; static mfp_cfg_t viper_pin_config[] __initdata = { diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c new file mode 100644 index 000000000000..5b986a8bd9e6 --- /dev/null +++ b/arch/arm/mach-pxa/zeus.c @@ -0,0 +1,820 @@ +/* + * Support for the Arcom ZEUS. + * + * Copyright (C) 2006 Arcom Control Systems Ltd. + * + * Loosely based on Arcom's 2.6.16.28. + * Maintained by Marc Zyngier <maz@misterjones.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/cpufreq.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/pm.h> +#include <linux/gpio.h> +#include <linux/serial_8250.h> +#include <linux/dm9000.h> +#include <linux/mmc/host.h> +#include <linux/spi/spi.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/i2c/pca953x.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/i2c.h> + +#include <mach/pxa2xx-regs.h> +#include <mach/regs-uart.h> +#include <mach/ohci.h> +#include <mach/mmc.h> +#include <mach/pxa27x-udc.h> +#include <mach/udc.h> +#include <mach/pxafb.h> +#include <mach/pxa2xx_spi.h> +#include <mach/mfp-pxa27x.h> +#include <mach/pm.h> +#include <mach/audio.h> +#include <mach/arcom-pcmcia.h> +#include <mach/zeus.h> + +#include "generic.h" + +/* + * Interrupt handling + */ + +static unsigned long zeus_irq_enabled_mask; +static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, }; +static const int zeus_isa_irq_map[] = { + 0, /* ISA irq #0, invalid */ + 0, /* ISA irq #1, invalid */ + 0, /* ISA irq #2, invalid */ + 1 << 0, /* ISA irq #3 */ + 1 << 1, /* ISA irq #4 */ + 1 << 2, /* ISA irq #5 */ + 1 << 3, /* ISA irq #6 */ + 1 << 4, /* ISA irq #7 */ + 0, /* ISA irq #8, invalid */ + 0, /* ISA irq #9, invalid */ + 1 << 5, /* ISA irq #10 */ + 1 << 6, /* ISA irq #11 */ + 1 << 7, /* ISA irq #12 */ +}; + +static inline int zeus_irq_to_bitmask(unsigned int irq) +{ + return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)]; +} + +static inline int zeus_bit_to_irq(int bit) +{ + return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0); +} + +static void zeus_ack_irq(unsigned int irq) +{ + __raw_writew(zeus_irq_to_bitmask(irq), ZEUS_CPLD_ISA_IRQ); +} + +static void zeus_mask_irq(unsigned int irq) +{ + zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(irq)); +} + +static void zeus_unmask_irq(unsigned int irq) +{ + zeus_irq_enabled_mask |= zeus_irq_to_bitmask(irq); +} + +static inline unsigned long zeus_irq_pending(void) +{ + return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask; +} + +static void zeus_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long pending; + + pending = zeus_irq_pending(); + do { + /* we're in a chained irq handler, + * so ack the interrupt by hand */ + desc->chip->ack(gpio_to_irq(ZEUS_ISA_GPIO)); + + if (likely(pending)) { + irq = zeus_bit_to_irq(__ffs(pending)); + generic_handle_irq(irq); + } + pending = zeus_irq_pending(); + } while (pending); +} + +static struct irq_chip zeus_irq_chip = { + .name = "ISA", + .ack = zeus_ack_irq, + .mask = zeus_mask_irq, + .unmask = zeus_unmask_irq, +}; + +static void __init zeus_init_irq(void) +{ + int level; + int isa_irq; + + pxa27x_init_irq(); + + /* Peripheral IRQs. It would be nice to move those inside driver + configuration, but it is not supported at the moment. */ + set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO), IRQ_TYPE_EDGE_FALLING); + set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING); + + /* Setup ISA IRQs */ + for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) { + isa_irq = zeus_bit_to_irq(level); + set_irq_chip(isa_irq, &zeus_irq_chip); + set_irq_handler(isa_irq, handle_edge_irq); + set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE); + } + + set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING); + set_irq_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler); +} + + +/* + * Platform devices + */ + +/* Flash */ +static struct resource zeus_mtd_resources[] = { + [0] = { /* NOR Flash (up to 64MB) */ + .start = ZEUS_FLASH_PHYS, + .end = ZEUS_FLASH_PHYS + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { /* SRAM */ + .start = ZEUS_SRAM_PHYS, + .end = ZEUS_SRAM_PHYS + SZ_512K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct physmap_flash_data zeus_flash_data[] = { + [0] = { + .width = 2, + .parts = NULL, + .nr_parts = 0, + }, +}; + +static struct platform_device zeus_mtd_devices[] = { + [0] = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &zeus_flash_data[0], + }, + .resource = &zeus_mtd_resources[0], + .num_resources = 1, + }, +}; + +/* Serial */ +static struct resource zeus_serial_resources[] = { + { + .start = 0x10000000, + .end = 0x1000000f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x10800000, + .end = 0x1080000f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x11000000, + .end = 0x1100000f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x40100000, + .end = 0x4010001f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x40200000, + .end = 0x4020001f, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x40700000, + .end = 0x4070001f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct plat_serial8250_port serial_platform_data[] = { + /* External UARTs */ + /* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */ + { /* COM1 */ + .mapbase = 0x10000000, + .irq = gpio_to_irq(ZEUS_UARTA_GPIO), + .irqflags = IRQF_TRIGGER_RISING, + .uartclk = 14745600, + .regshift = 1, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* COM2 */ + .mapbase = 0x10800000, + .irq = gpio_to_irq(ZEUS_UARTB_GPIO), + .irqflags = IRQF_TRIGGER_RISING, + .uartclk = 14745600, + .regshift = 1, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* COM3 */ + .mapbase = 0x11000000, + .irq = gpio_to_irq(ZEUS_UARTC_GPIO), + .irqflags = IRQF_TRIGGER_RISING, + .uartclk = 14745600, + .regshift = 1, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* COM4 */ + .mapbase = 0x11800000, + .irq = gpio_to_irq(ZEUS_UARTD_GPIO), + .irqflags = IRQF_TRIGGER_RISING, + .uartclk = 14745600, + .regshift = 1, + .flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + /* Internal UARTs */ + { /* FFUART */ + .membase = (void *)&FFUART, + .mapbase = __PREG(FFUART), + .irq = IRQ_FFUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* BTUART */ + .membase = (void *)&BTUART, + .mapbase = __PREG(BTUART), + .irq = IRQ_BTUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { /* STUART */ + .membase = (void *)&STUART, + .mapbase = __PREG(STUART), + .irq = IRQ_STUART, + .uartclk = 921600 * 16, + .regshift = 2, + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .iotype = UPIO_MEM, + }, + { }, +}; + +static struct platform_device zeus_serial_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = serial_platform_data, + }, + .num_resources = ARRAY_SIZE(zeus_serial_resources), + .resource = zeus_serial_resources, +}; + +/* Ethernet */ +static struct resource zeus_dm9k0_resource[] = { + [0] = { + .start = ZEUS_ETH0_PHYS, + .end = ZEUS_ETH0_PHYS + 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = ZEUS_ETH0_PHYS + 2, + .end = ZEUS_ETH0_PHYS + 3, + .flags = IORESOURCE_MEM + }, + [2] = { + .start = gpio_to_irq(ZEUS_ETH0_GPIO), + .end = gpio_to_irq(ZEUS_ETH0_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct resource zeus_dm9k1_resource[] = { + [0] = { + .start = ZEUS_ETH1_PHYS, + .end = ZEUS_ETH1_PHYS + 1, + .flags = IORESOURCE_MEM + }, + [1] = { + .start = ZEUS_ETH1_PHYS + 2, + .end = ZEUS_ETH1_PHYS + 3, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = gpio_to_irq(ZEUS_ETH1_GPIO), + .end = gpio_to_irq(ZEUS_ETH1_GPIO), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct dm9000_plat_data zeus_dm9k_platdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device zeus_dm9k0_device = { + .name = "dm9000", + .id = 0, + .num_resources = ARRAY_SIZE(zeus_dm9k0_resource), + .resource = zeus_dm9k0_resource, + .dev = { + .platform_data = &zeus_dm9k_platdata, + } +}; + +static struct platform_device zeus_dm9k1_device = { + .name = "dm9000", + .id = 1, + .num_resources = ARRAY_SIZE(zeus_dm9k1_resource), + .resource = zeus_dm9k1_resource, + .dev = { + .platform_data = &zeus_dm9k_platdata, + } +}; + +/* External SRAM */ +static struct resource zeus_sram_resource = { + .start = ZEUS_SRAM_PHYS, + .end = ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device zeus_sram_device = { + .name = "pxa2xx-8bit-sram", + .id = 0, + .num_resources = 1, + .resource = &zeus_sram_resource, +}; + +/* SPI interface on SSP3 */ +static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = { + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct platform_device pxa2xx_spi_ssp3_device = { + .name = "pxa2xx-spi", + .id = 3, + .dev = { + .platform_data = &pxa2xx_spi_ssp3_master_info, + }, +}; + +/* Leds */ +static struct gpio_led zeus_leds[] = { + [0] = { + .name = "zeus:yellow:1", + .default_trigger = "heartbeat", + .gpio = ZEUS_EXT0_GPIO(3), + .active_low = 1, + }, + [1] = { + .name = "zeus:yellow:2", + .default_trigger = "default-on", + .gpio = ZEUS_EXT0_GPIO(4), + .active_low = 1, + }, + [2] = { + .name = "zeus:yellow:3", + .default_trigger = "default-on", + .gpio = ZEUS_EXT0_GPIO(5), + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data zeus_leds_info = { + .leds = zeus_leds, + .num_leds = ARRAY_SIZE(zeus_leds), +}; + +static struct platform_device zeus_leds_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &zeus_leds_info, + }, +}; + +static void zeus_cf_reset(int state) +{ + u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL); + + if (state) + cpld_state |= ZEUS_CPLD_CONTROL_CF_RST; + else + cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST; + + __raw_writew(cpld_state, ZEUS_CPLD_CONTROL); +} + +static struct arcom_pcmcia_pdata zeus_pcmcia_info = { + .cd_gpio = ZEUS_CF_CD_GPIO, + .rdy_gpio = ZEUS_CF_RDY_GPIO, + .pwr_gpio = ZEUS_CF_PWEN_GPIO, + .reset = zeus_cf_reset, +}; + +static struct platform_device zeus_pcmcia_device = { + .name = "zeus-pcmcia", + .id = -1, + .dev = { + .platform_data = &zeus_pcmcia_info, + }, +}; + +static struct platform_device *zeus_devices[] __initdata = { + &zeus_serial_device, + &zeus_mtd_devices[0], + &zeus_dm9k0_device, + &zeus_dm9k1_device, + &zeus_sram_device, + &pxa2xx_spi_ssp3_device, + &zeus_leds_device, + &zeus_pcmcia_device, +}; + +/* AC'97 */ +static pxa2xx_audio_ops_t zeus_ac97_info = { + .reset_gpio = 95, +}; + + +/* + * USB host + */ + +static int zeus_ohci_init(struct device *dev) +{ + int err; + + /* Switch on port 2. */ + if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) { + dev_err(dev, "Can't request USB2_PWREN\n"); + return err; + } + + if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) { + gpio_free(ZEUS_USB2_PWREN_GPIO); + dev_err(dev, "Can't enable USB2_PWREN\n"); + return err; + } + + /* Port 2 is shared between host and client interface. */ + UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + + return 0; +} + +static void zeus_ohci_exit(struct device *dev) +{ + /* Power-off port 2 */ + gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0); + gpio_free(ZEUS_USB2_PWREN_GPIO); +} + +static struct pxaohci_platform_data zeus_ohci_platform_data = { + .port_mode = PMM_NPS_MODE, + .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, + .init = zeus_ohci_init, + .exit = zeus_ohci_exit, +}; + +/* + * Flat Panel + */ + +static void zeus_lcd_power(int on, struct fb_var_screeninfo *si) +{ + gpio_set_value(ZEUS_LCD_EN_GPIO, on); +} + +static void zeus_backlight_power(int on) +{ + gpio_set_value(ZEUS_BKLEN_GPIO, on); +} + +static int zeus_setup_fb_gpios(void) +{ + int err; + + if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN"))) + goto out_err; + + if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0))) + goto out_err_lcd; + + if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN"))) + goto out_err_lcd; + + if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0))) + goto out_err_bkl; + + return 0; + +out_err_bkl: + gpio_free(ZEUS_BKLEN_GPIO); +out_err_lcd: + gpio_free(ZEUS_LCD_EN_GPIO); +out_err: + return err; +} + +static struct pxafb_mode_info zeus_fb_mode_info[] = { + { + .pixclock = 39722, + + .xres = 640, + .yres = 480, + + .bpp = 16, + + .hsync_len = 63, + .left_margin = 16, + .right_margin = 81, + + .vsync_len = 2, + .upper_margin = 12, + .lower_margin = 31, + + .sync = 0, + }, +}; + +static struct pxafb_mach_info zeus_fb_info = { + .modes = zeus_fb_mode_info, + .num_modes = 1, + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, + .pxafb_lcd_power = zeus_lcd_power, + .pxafb_backlight_power = zeus_backlight_power, +}; + +/* + * MMC/SD Device + * + * The card detect interrupt isn't debounced so we delay it by 250ms + * to give the card a chance to fully insert/eject. + */ + +static struct pxamci_platform_data zeus_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .detect_delay = HZ/4, + .gpio_card_detect = ZEUS_MMC_CD_GPIO, + .gpio_card_ro = ZEUS_MMC_WP_GPIO, + .gpio_card_ro_invert = 1, + .gpio_power = -1 +}; + +/* + * USB Device Controller + */ +static void zeus_udc_command(int cmd) +{ + switch (cmd) { + case PXA2XX_UDC_CMD_DISCONNECT: + pr_info("zeus: disconnecting USB client\n"); + UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE; + break; + + case PXA2XX_UDC_CMD_CONNECT: + pr_info("zeus: connecting USB client\n"); + UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE; + break; + } +} + +static struct pxa2xx_udc_mach_info zeus_udc_info = { + .udc_command = zeus_udc_command, +}; + +static void zeus_power_off(void) +{ + local_irq_disable(); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP); +} + +int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio, + unsigned ngpio, void *context) +{ + int i; + u8 pcb_info = 0; + + for (i = 0; i < 8; i++) { + int pcb_bit = gpio + i + 8; + + if (gpio_request(pcb_bit, "pcb info")) { + dev_err(&client->dev, "Can't request pcb info %d\n", i); + continue; + } + + if (gpio_direction_input(pcb_bit)) { + dev_err(&client->dev, "Can't read pcb info %d\n", i); + gpio_free(pcb_bit); + continue; + } + + pcb_info |= !!gpio_get_value(pcb_bit) << i; + + gpio_free(pcb_bit); + } + + dev_info(&client->dev, "Zeus PCB version %d issue %d\n", + pcb_info >> 4, pcb_info & 0xf); + + return 0; +} + +static struct pca953x_platform_data zeus_pca953x_pdata[] = { + [0] = { .gpio_base = ZEUS_EXT0_GPIO_BASE, }, + [1] = { + .gpio_base = ZEUS_EXT1_GPIO_BASE, + .setup = zeus_get_pcb_info, + }, + [2] = { .gpio_base = ZEUS_USER_GPIO_BASE, }, +}; + +static struct i2c_board_info __initdata zeus_i2c_devices[] = { + { + I2C_BOARD_INFO("pca9535", 0x21), + .platform_data = &zeus_pca953x_pdata[0], + }, + { + I2C_BOARD_INFO("pca9535", 0x22), + .platform_data = &zeus_pca953x_pdata[1], + }, + { + I2C_BOARD_INFO("pca9535", 0x20), + .platform_data = &zeus_pca953x_pdata[2], + .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO), + }, + { I2C_BOARD_INFO("lm75a", 0x48) }, + { I2C_BOARD_INFO("24c01", 0x50) }, + { I2C_BOARD_INFO("isl1208", 0x6f) }, +}; + +static mfp_cfg_t zeus_pin_config[] __initdata = { + GPIO15_nCS_1, + GPIO78_nCS_2, + GPIO80_nCS_4, + GPIO33_nCS_5, + + GPIO22_GPIO, + GPIO32_MMC_CLK, + GPIO92_MMC_DAT_0, + GPIO109_MMC_DAT_1, + GPIO110_MMC_DAT_2, + GPIO111_MMC_DAT_3, + GPIO112_MMC_CMD, + + GPIO88_USBH1_PWR, + GPIO89_USBH1_PEN, + GPIO119_USBH2_PWR, + GPIO120_USBH2_PEN, + + GPIO86_LCD_LDD_16, + GPIO87_LCD_LDD_17, + + GPIO102_GPIO, + GPIO104_CIF_DD_2, + GPIO105_CIF_DD_1, + + GPIO48_nPOE, + GPIO49_nPWE, + GPIO50_nPIOR, + GPIO51_nPIOW, + GPIO85_nPCE_1, + GPIO54_nPCE_2, + GPIO79_PSKTSEL, + GPIO55_nPREG, + GPIO56_nPWAIT, + GPIO57_nIOIS16, + GPIO36_GPIO, /* CF CD */ + GPIO97_GPIO, /* CF PWREN */ + GPIO99_GPIO, /* CF RDY */ +}; + +static void __init zeus_init(void) +{ + u16 dm9000_msc = 0xe279; + + system_rev = __raw_readw(ZEUS_CPLD_VERSION); + pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f)); + + /* Fix timings for dm9000s (CS1/CS2)*/ + MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16); + MSC1 = (MSC1 & 0xffff0000) | dm9000_msc; + + pm_power_off = zeus_power_off; + + pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config)); + + platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices)); + + pxa_set_ohci_info(&zeus_ohci_platform_data); + + if (zeus_setup_fb_gpios()) + pr_err("Failed to setup fb gpios\n"); + else + set_pxa_fb_info(&zeus_fb_info); + + pxa_set_mci_info(&zeus_mci_platform_data); + pxa_set_udc_info(&zeus_udc_info); + pxa_set_ac97_info(&zeus_ac97_info); + pxa_set_i2c_info(NULL); + i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices)); +} + +static struct map_desc zeus_io_desc[] __initdata = { + { + .virtual = ZEUS_CPLD_VERSION, + .pfn = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, + { + .virtual = ZEUS_CPLD_ISA_IRQ, + .pfn = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, + { + .virtual = ZEUS_CPLD_CONTROL, + .pfn = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, + { + .virtual = ZEUS_CPLD_EXTWDOG, + .pfn = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, + { + .virtual = ZEUS_PC104IO, + .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS), + .length = 0x00800000, + .type = MT_DEVICE, + }, +}; + +static void __init zeus_map_io(void) +{ + pxa_map_io(); + + iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc)); + + /* Clear PSPR to ensure a full restart on wake-up. */ + PMCR = PSPR = 0; + + /* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */ + OSCC |= OSCC_OON; + + /* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...). + * float chip selects and PCMCIA */ + PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP; +} + +MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS") + /* Maintainer: Marc Zyngier <maz@misterjones.org> */ + .phys_io = 0x40000000, + .io_pg_offst = ((io_p2v(0x40000000) >> 18) & 0xfffc), + .boot_params = 0xa0000100, + .map_io = zeus_map_io, + .init_irq = zeus_init_irq, + .timer = &pxa_timer, + .init_machine = zeus_init, +MACHINE_END + diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index c48e1f2c3349..ee5e392430e8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -70,7 +70,7 @@ config MACH_REALVIEW_PBX bool "Support RealView/PBX platform" select ARM_GIC select HAVE_PATA_PLATFORM - select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET + select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET select ZONE_DMA if SPARSEMEM help Include support for the ARM(R) RealView PBX platform. diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h index 585211ca0187..7d74fd5c8d66 100644 --- a/arch/arm/mach-s3c24a0/include/mach/memory.h +++ b/arch/arm/mach-s3c24a0/include/mach/memory.h @@ -15,5 +15,7 @@ #define __virt_to_bus(x) __virt_to_phys(x) #define __bus_to_virt(x) __phys_to_virt(x) +#define __pfn_to_bus(x) __pfn_to_phys(x) +#define __bus_to_pfn(x) __phys_to_pfn(x) #endif diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 03a7f3857c5e..b17d52f7cc48 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -4,6 +4,7 @@ menu "SA11x0 Implementations" config SA1100_ASSABET bool "Assabet" + select CPU_FREQ_SA1110 help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (also known as the Assabet). @@ -19,6 +20,7 @@ config ASSABET_NEPONSET config SA1100_CERF bool "CerfBoard" + select CPU_FREQ_SA1110 help The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). More information is available at: @@ -45,6 +47,7 @@ endchoice config SA1100_COLLIE bool "Sharp Zaurus SL5500" + # FIXME: select CPU_FREQ_SA11x0 select SHARP_LOCOMO select SHARP_SCOOP select SHARP_PARAM @@ -54,6 +57,7 @@ config SA1100_COLLIE config SA1100_H3100 bool "Compaq iPAQ H3100" select HTC_EGPIO + select CPU_FREQ_SA1100 help Say Y here if you intend to run this kernel on the Compaq iPAQ H3100 handheld computer. Information about this machine and the @@ -64,6 +68,7 @@ config SA1100_H3100 config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" select HTC_EGPIO + select CPU_FREQ_SA1100 help Say Y here if you intend to run this kernel on the Compaq iPAQ H3600 handheld computer. Information about this machine and the @@ -74,6 +79,7 @@ config SA1100_H3600 config SA1100_BADGE4 bool "HP Labs BadgePAD 4" select SA1111 + select CPU_FREQ_SA1100 help Say Y here if you want to build a kernel for the HP Laboratories BadgePAD 4. @@ -81,6 +87,7 @@ config SA1100_BADGE4 config SA1100_JORNADA720 bool "HP Jornada 720" select SA1111 + # FIXME: select CPU_FREQ_SA11x0 help Say Y here if you want to build a kernel for the HP Jornada 720 handheld computer. See <http://www.hp.com/jornada/products/720> @@ -98,12 +105,14 @@ config SA1100_JORNADA720_SSP config SA1100_HACKKIT bool "HackKit Core CPU Board" + select CPU_FREQ_SA1100 help Say Y here to support the HackKit Core CPU Board <http://hackkit.eletztrick.de>; config SA1100_LART bool "LART" + select CPU_FREQ_SA1100 help Say Y here if you are using the Linux Advanced Radio Terminal (also known as the LART). See <http://www.lartmaker.nl/> for @@ -111,6 +120,7 @@ config SA1100_LART config SA1100_PLEB bool "PLEB" + select CPU_FREQ_SA1100 help Say Y here if you are using version 1 of the Portable Linux Embedded Board (also known as PLEB). @@ -119,6 +129,7 @@ config SA1100_PLEB config SA1100_SHANNON bool "Shannon" + select CPU_FREQ_SA1100 help The Shannon (also known as a Tuxscreen, and also as a IS2630) was a limited edition webphone produced by Philips. The Shannon is a SA1100 @@ -127,6 +138,7 @@ config SA1100_SHANNON config SA1100_SIMPAD bool "Simpad" + select CPU_FREQ_SA1110 help The SIEMENS webpad SIMpad is based on the StrongARM 1110. There are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB @@ -145,3 +157,4 @@ config SA1100_SSP endmenu endif + diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 9faea1511c1f..3c1fcd696714 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -58,7 +58,6 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = { 2802 /* 280.2 MHz */ }; -#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110) /* rounds up(!) */ unsigned int sa11x0_freq_to_ppcr(unsigned int khz) { @@ -110,17 +109,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu) return cclk_frequency_100khz[PPCR & 0xf] * 100; } -#else -/* - * We still need to provide this so building without cpufreq works. - */ -unsigned int cpufreq_get(unsigned int cpu) -{ - return cclk_frequency_100khz[PPCR & 0xf] * 100; -} -EXPORT_SYMBOL(cpufreq_get); -#endif - /* * This is the SA11x0 sched_clock implementation. This has * a resolution of 271ns, and a maximum value of 32025597s (370 days). diff --git a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h new file mode 100644 index 000000000000..bd94819e314f --- /dev/null +++ b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-w90x900/include/mach/nuc900_spi.h + * + * Copyright (c) 2009 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#ifndef __ASM_ARCH_SPI_H +#define __ASM_ARCH_SPI_H + +extern void mfp_set_groupg(struct device *dev); + +struct nuc900_spi_info { + unsigned int num_cs; + unsigned int lsb; + unsigned int txneg; + unsigned int rxneg; + unsigned int divider; + unsigned int sleep; + unsigned int txnum; + unsigned int txbitlen; + int bus_num; +}; + +struct nuc900_spi_chip { + unsigned char bits_per_word; +}; + +#endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 2b7996401b0f..f5abc51c5a07 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -54,7 +54,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr, * We enforce the MAP_FIXED case. */ if (flags & MAP_FIXED) { - if (aliasing && flags & MAP_SHARED && addr & (SHMLBA - 1)) + if (aliasing && flags & MAP_SHARED && + (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1)) return -EINVAL; return addr; } diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 4cbca9da1505..996cbac6932c 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o obj-$(CONFIG_MXC_PWM) += pwm.o +obj-$(CONFIG_USB_EHCI_MXC) += ehci.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c new file mode 100644 index 000000000000..41599be882e8 --- /dev/null +++ b/arch/arm/plat-mxc/ehci.c @@ -0,0 +1,92 @@ +/* + * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/mxc_ehci.h> + +#define USBCTRL_OTGBASE_OFFSET 0x600 + +#define MX31_OTG_SIC_SHIFT 29 +#define MX31_OTG_SIC_MASK (0xf << MX31_OTG_SIC_SHIFT) +#define MX31_OTG_PM_BIT (1 << 24) + +#define MX31_H2_SIC_SHIFT 21 +#define MX31_H2_SIC_MASK (0xf << MX31_H2_SIC_SHIFT) +#define MX31_H2_PM_BIT (1 << 16) +#define MX31_H2_DT_BIT (1 << 5) + +#define MX31_H1_SIC_SHIFT 13 +#define MX31_H1_SIC_MASK (0xf << MX31_H1_SIC_SHIFT) +#define MX31_H1_PM_BIT (1 << 8) +#define MX31_H1_DT_BIT (1 << 4) + +int mxc_set_usbcontrol(int port, unsigned int flags) +{ + unsigned int v; + + if (cpu_is_mx31()) { + v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_OTG_SIC_SHIFT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MX31_OTG_PM_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H1_SIC_SHIFT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) + << MX31_H2_SIC_SHIFT; + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + } + + writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR + + USBCTRL_OTGBASE_OFFSET)); + return 0; + } + + printk(KERN_WARNING + "%s() unable to setup USBCONTROL for this CPU\n", __func__); + return -EINVAL; +} +EXPORT_SYMBOL(mxc_set_usbcontrol); + diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h new file mode 100644 index 000000000000..8f796239393e --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h @@ -0,0 +1,37 @@ +#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H +#define __INCLUDE_ASM_ARCH_MXC_EHCI_H + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + +#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) +#define MXC_EHCI_TTL_ENABLED (1 << 6) + +struct mxc_usbh_platform_data { + int (*init)(struct platform_device *pdev); + int (*exit)(struct platform_device *pdev); + + unsigned int portsc; + unsigned int flags; + struct otg_transceiver *otg; +}; + +int mxc_set_usbcontrol(int port, unsigned int flags); + +#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ + diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index f348ddfb0492..e2ea04a4c8a1 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -27,6 +27,7 @@ config ARCH_OMAP4 bool "TI OMAP4" select CPU_V7 select ARM_GIC + select COMMON_CLKDEV endchoice @@ -42,28 +43,6 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS || LEDS_OMAP_DEBUG -config OMAP_DEBUG_POWERDOMAIN - bool "Emit debug messages from powerdomain layer" - depends on ARCH_OMAP2 || ARCH_OMAP3 - help - Say Y here if you want to compile in powerdomain layer - debugging messages for OMAP2/3. These messages can - provide more detail as to why some powerdomain calls - may be failing, and will also emit a descriptive message - for every powerdomain register write. However, the - extra detail costs some memory. - -config OMAP_DEBUG_CLOCKDOMAIN - bool "Emit debug messages from clockdomain layer" - depends on ARCH_OMAP2 || ARCH_OMAP3 - help - Say Y here if you want to compile in clockdomain layer - debugging messages for OMAP2/3. These messages can - provide more detail as to why some clockdomain calls - may be failing, and will also emit a descriptive message - for every clockdomain register write. However, the - extra detail costs some memory. - config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_OMAP @@ -78,28 +57,28 @@ config OMAP_RESET_CLOCKS config OMAP_MUX bool "OMAP multiplexing support" - depends on ARCH_OMAP + depends on ARCH_OMAP default y - help - Pin multiplexing support for OMAP boards. If your bootloader - sets the multiplexing correctly, say N. Otherwise, or if unsure, - say Y. + help + Pin multiplexing support for OMAP boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. config OMAP_MUX_DEBUG bool "Multiplexing debug output" - depends on OMAP_MUX - help - Makes the multiplexing functions print out a lot of debug info. - This is useful if you want to find out the correct values of the - multiplexing registers. + depends on OMAP_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. config OMAP_MUX_WARNINGS bool "Warn about pins the bootloader didn't set up" - depends on OMAP_MUX - default y - help + depends on OMAP_MUX + default y + help Choose Y here to warn whenever driver initialization logic needs - to change the pin multiplexing setup. When there are no warnings + to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. config OMAP_MCBSP @@ -125,7 +104,7 @@ config OMAP_IOMMU_DEBUG tristate choice - prompt "System timer" + prompt "System timer" default OMAP_MPU_TIMER config OMAP_MPU_TIMER @@ -148,11 +127,11 @@ config OMAP_32K_TIMER endchoice config OMAP_32K_TIMER_HZ - int "Kernel internal timer frequency for 32KHz timer" - range 32 1024 - depends on OMAP_32K_TIMER - default "128" - help + int "Kernel internal timer frequency for 32KHz timer" + range 32 1024 + depends on OMAP_32K_TIMER + default "128" + help Kernel internal timer frequency should be a divisor of 32768, such as 64 or 128. diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 681bfc37ebb2..89cafc937249 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -40,36 +40,10 @@ static struct clk_functions *arch_clock; * clock framework is not up , it is defined here to avoid rework in * every driver. Also dummy prcm reset function is added */ -/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */ -#if defined(CONFIG_ARCH_OMAP4) -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -void omap2_clk_prepare_for_reboot(void) -{ -} -EXPORT_SYMBOL(omap2_clk_prepare_for_reboot); - -void omap_prcm_arch_reset(char mode) -{ -} -EXPORT_SYMBOL(omap_prcm_arch_reset); -#endif int clk_enable(struct clk *clk) { unsigned long flags; int ret = 0; - if (cpu_is_omap44xx()) - /* OMAP4 clk framework not supported yet */ - return 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index cc050b3313bd..bf1eaf3a27d4 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -280,16 +280,18 @@ void __init omap2_set_globals_343x(void) #if defined(CONFIG_ARCH_OMAP4) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), + .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), }; void __init omap2_set_globals_443x(void) { omap2_set_globals_tap(&omap4_globals); omap2_set_globals_control(&omap4_globals); + omap2_set_globals_prcm(&omap4_globals); } #endif diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 09c1107637f6..923c9621096b 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/smc91x.h> #include <mach/hardware.h> @@ -24,6 +25,12 @@ * platforms include H2, H3, H4, and Perseus2. */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -36,6 +43,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index f86617869b38..30b5db73017a 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -242,6 +242,39 @@ fail: /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + /* Numbering for the SPI-capable controllers when used for SPI: * spi = 1 * uwire = 2 @@ -324,39 +357,6 @@ static void omap_init_wdt(void) static inline void omap_init_wdt(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -384,9 +384,9 @@ static int __init omap_init_devices(void) */ omap_init_dsp(); omap_init_kp(); + omap_init_rng(); omap_init_uwire(); omap_init_wdt(); - omap_init_rng(); return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index d17375e06a1e..09d82b3c66ce 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -47,7 +47,6 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 -#define OMAP_DMA_CCR_EN (1 << 7) #define OMAP2_DMA_CSR_CLEAR_MASK 0xffe #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -1120,17 +1119,8 @@ int omap_dma_running(void) { int lch; - /* - * On OMAP1510, internal LCD controller will start the transfer - * when it gets enabled, so assume DMA running if LCD enabled. - */ - if (cpu_is_omap1510()) - if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) - return 1; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + if (cpu_class_is_omap1()) + if (omap_lcd_dma_running()) return 1; for (lch = 0; lch < dma_chan_count; lch++) @@ -1990,377 +1980,6 @@ static struct irqaction omap24xx_dma_irq; /*----------------------------------------------------------------------------*/ -static struct lcd_dma_info { - spinlock_t lock; - int reserved; - void (*callback)(u16 status, void *data); - void *cb_data; - - int active; - unsigned long addr, size; - int rotate, data_type, xres, yres; - int vxres; - int mirror; - int xscale, yscale; - int ext_ctrl; - int src_port; - int single_transfer; -} lcd_dma; - -void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type) -{ - lcd_dma.addr = addr; - lcd_dma.data_type = data_type; - lcd_dma.xres = fb_xres; - lcd_dma.yres = fb_yres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1); - -void omap_set_lcd_dma_src_port(int port) -{ - lcd_dma.src_port = port; -} - -void omap_set_lcd_dma_ext_controller(int external) -{ - lcd_dma.ext_ctrl = external; -} -EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); - -void omap_set_lcd_dma_single_transfer(int single) -{ - lcd_dma.single_transfer = single; -} -EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); - -void omap_set_lcd_dma_b1_rotation(int rotate) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); - BUG(); - return; - } - lcd_dma.rotate = rotate; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); - -void omap_set_lcd_dma_b1_mirror(int mirror) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.mirror = mirror; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); - -void omap_set_lcd_dma_b1_vxres(unsigned long vxres) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " - "in 1510 mode\n"); - BUG(); - } - lcd_dma.vxres = vxres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); - -void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.xscale = xscale; - lcd_dma.yscale = yscale; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); - -static void set_b1_regs(void) -{ - unsigned long top, bottom; - int es; - u16 w; - unsigned long en, fn; - long ei, fi; - unsigned long vxres; - unsigned int xscale, yscale; - - switch (lcd_dma.data_type) { - case OMAP_DMA_DATA_TYPE_S8: - es = 1; - break; - case OMAP_DMA_DATA_TYPE_S16: - es = 2; - break; - case OMAP_DMA_DATA_TYPE_S32: - es = 4; - break; - default: - BUG(); - return; - } - - vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; - xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; - yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; - BUG_ON(vxres < lcd_dma.xres); - -#define PIXADDR(x, y) (lcd_dma.addr + \ - ((y) * vxres * yscale + (x) * xscale) * es) -#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) - - switch (lcd_dma.rotate) { - case 0: - if (!lcd_dma.mirror) { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - /* 1510 DMA requires the bottom address to be 2 more - * than the actual last memory access location. */ - if (omap_dma_in_1510_mode() && - lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) - bottom += 2; - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 90: - if (!lcd_dma.mirror) { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - case 180: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); - } else { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 270: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); - } else { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - default: - BUG(); - return; /* Suppress warning about uninitialized vars */ - } - - if (omap_dma_in_1510_mode()) { - omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); - omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); - omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); - omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); - - return; - } - - /* 1610 regs */ - omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); - omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); - omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); - omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); - - omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); - omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); - - w = omap_readw(OMAP1610_DMA_LCD_CSDP); - w &= ~0x03; - w |= lcd_dma.data_type; - omap_writew(w, OMAP1610_DMA_LCD_CSDP); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - /* Always set the source port as SDRAM for now*/ - w &= ~(0x03 << 6); - if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ - else - w &= ~(1 << 1); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - if (!(lcd_dma.rotate || lcd_dma.mirror || - lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* Set the double-indexed addressing mode */ - w |= (0x03 << 12); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); - omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); - omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); -} - -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) -{ - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - if (unlikely(!(w & (1 << 3)))) { - printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); - return IRQ_NONE; - } - /* Ack the IRQ */ - w |= (1 << 3); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - lcd_dma.active = 0; - if (lcd_dma.callback != NULL) - lcd_dma.callback(w, lcd_dma.cb_data); - - return IRQ_HANDLED; -} - -int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data) -{ - spin_lock_irq(&lcd_dma.lock); - if (lcd_dma.reserved) { - spin_unlock_irq(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA channel already reserved\n"); - BUG(); - return -EBUSY; - } - lcd_dma.reserved = 1; - spin_unlock_irq(&lcd_dma.lock); - lcd_dma.callback = callback; - lcd_dma.cb_data = data; - lcd_dma.active = 0; - lcd_dma.single_transfer = 0; - lcd_dma.rotate = 0; - lcd_dma.vxres = 0; - lcd_dma.mirror = 0; - lcd_dma.xscale = 0; - lcd_dma.yscale = 0; - lcd_dma.ext_ctrl = 0; - lcd_dma.src_port = 0; - - return 0; -} -EXPORT_SYMBOL(omap_request_lcd_dma); - -void omap_free_lcd_dma(void) -{ - spin_lock(&lcd_dma.lock); - if (!lcd_dma.reserved) { - spin_unlock(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA is not reserved\n"); - BUG(); - return; - } - if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, - OMAP1610_DMA_LCD_CCR); - lcd_dma.reserved = 0; - spin_unlock(&lcd_dma.lock); -} -EXPORT_SYMBOL(omap_free_lcd_dma); - -void omap_enable_lcd_dma(void) -{ - u16 w; - - /* - * Set the Enable bit only if an external controller is - * connected. Otherwise the OMAP internal controller will - * start the transfer when it gets enabled. - */ - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w |= 1 << 8; - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - lcd_dma.active = 1; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w |= 1 << 7; - omap_writew(w, OMAP1610_DMA_LCD_CCR); -} -EXPORT_SYMBOL(omap_enable_lcd_dma); - -void omap_setup_lcd_dma(void) -{ - BUG_ON(lcd_dma.active); - if (!enable_1510_mode) { - /* Set some reasonable defaults */ - omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); - omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); - omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); - } - set_b1_regs(); - if (!enable_1510_mode) { - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* - * If DMA was already active set the end_prog bit to have - * the programmed register set loaded into the active - * register set. - */ - w |= 1 << 11; /* End_prog */ - if (!lcd_dma.single_transfer) - w |= (3 << 8); /* Auto_init, repeat */ - omap_writew(w, OMAP1610_DMA_LCD_CCR); - } -} -EXPORT_SYMBOL(omap_setup_lcd_dma); - -void omap_stop_lcd_dma(void) -{ - u16 w; - - lcd_dma.active = 0; - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w &= ~(1 << 7); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); -} -EXPORT_SYMBOL(omap_stop_lcd_dma); - void omap_dma_global_context_save(void) { omap_dma_global_context.dma_irqenable_l0 = @@ -2465,14 +2084,6 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; - if (cpu_is_omap16xx()) { - u16 w; - - /* this would prevent OMAP sleep */ - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - } } else if (cpu_class_is_omap2()) { u8 revision = dma_read(REVISION) & 0xff; printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", @@ -2483,7 +2094,6 @@ static int __init omap_init_dma(void) return 0; } - spin_lock_init(&lcd_dma.lock); spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { @@ -2548,22 +2158,6 @@ static int __init omap_init_dma(void) } } - - /* FIXME: Update LCD DMA to work on 24xx */ - if (cpu_class_is_omap1()) { - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, - "LCD DMA", NULL); - if (r != 0) { - int i; - - printk(KERN_ERR "unable to request IRQ for LCD DMA " - "(error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(omap1_dma_irq[i], (void *) (i + 1)); - goto out_free; - } - } - return 0; out_free: diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c index 78a4ce538dbd..d3eea4f47533 100644 --- a/arch/arm/plat-omap/fb.c +++ b/arch/arm/plat-omap/fb.c @@ -28,13 +28,13 @@ #include <linux/platform_device.h> #include <linux/bootmem.h> #include <linux/io.h> +#include <linux/omapfb.h> #include <mach/hardware.h> #include <asm/mach/map.h> #include <plat/board.h> #include <plat/sram.h> -#include <plat/omapfb.h> #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE) @@ -55,6 +55,10 @@ static struct platform_device omap_fb_device = { .num_resources = 0, }; +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ +} + static inline int ranges_overlap(unsigned long start1, unsigned long size1, unsigned long start2, unsigned long size2) { @@ -327,7 +331,33 @@ static inline int omap_init_fb(void) arch_initcall(omap_init_fb); -#else +#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE) + +static u64 omap_fb_dma_mask = ~(u32)0; +static struct omapfb_platform_data omapfb_config; + +static struct platform_device omap_fb_device = { + .name = "omapfb", + .id = -1, + .dev = { + .dma_mask = &omap_fb_dma_mask, + .coherent_dma_mask = ~(u32)0, + .platform_data = &omapfb_config, + }, + .num_resources = 0, +}; + +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ + omapfb_config = *data; +} + +static inline int omap_init_fb(void) +{ + return platform_device_register(&omap_fb_device); +} + +arch_initcall(omap_init_fb); void omapfb_reserve_sdram(void) {} unsigned long omapfb_reserve_sram(unsigned long sram_pstart, @@ -339,5 +369,20 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart, return 0; } +#else + +void omapfb_set_platform_data(struct omapfb_platform_data *data) +{ +} + +void omapfb_reserve_sdram(void) {} +unsigned long omapfb_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long start_avail, + unsigned long size_avail) +{ + return 0; +} #endif diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index c08362dbb8ed..33fff4ef382d 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = { #endif }; -#if defined(CONFIG_ARCH_OMAP24XX) -static const int omap24xx_pins[][2] = { - { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, - { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, -}; -#else -static const int omap24xx_pins[][2] = {}; -#endif -#if defined(CONFIG_ARCH_OMAP34XX) -static const int omap34xx_pins[][2] = { - { K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA}, - { AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA}, - { AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA}, -}; -#else -static const int omap34xx_pins[][2] = {}; -#endif - #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static void __init omap_i2c_mux_pins(int bus) -{ - int scl, sda; - - if (cpu_class_is_omap1()) { - scl = I2C_SCL; - sda = I2C_SDA; - } else if (cpu_is_omap24xx()) { - scl = omap24xx_pins[bus][0]; - sda = omap24xx_pins[bus][1]; - } else if (cpu_is_omap34xx()) { - scl = omap34xx_pins[bus][0]; - sda = omap34xx_pins[bus][1]; - } else { - return; - } - - omap_cfg_reg(sda); - omap_cfg_reg(scl); -} - static int __init omap_i2c_nr_ports(void) { int ports = 0; @@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id) res[1].start = irq; } - omap_i2c_mux_pins(bus_id - 1); return platform_device_register(pdev); } @@ -209,7 +169,7 @@ out: subsys_initcall(omap_register_i2c_bus_cmdline); /** - * omap_register_i2c_bus - register I2C bus with device descriptors + * omap_plat_register_i2c_bus - register I2C bus with device descriptors * @bus_id: bus id counting from number 1 * @clkrate: clock rate of the bus in kHz * @info: pointer into I2C device descriptor table or NULL @@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline); * * Returns 0 on success or an error code. */ -int __init omap_register_i2c_bus(int bus_id, u32 clkrate, +int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len) { diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index abb17b604f82..376ce18216ff 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -114,15 +114,6 @@ struct omap_pwm_led_platform_data { void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); }; -/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - struct omap_uart_config { /* Bit field of UARTs present; bit 0 --> UART1 */ unsigned int enabled_uarts; diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h new file mode 100644 index 000000000000..35b36caf5f91 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -0,0 +1,41 @@ +/* + * clkdev <-> OMAP integration + * + * Russell King <linux@arm.linux.org.uk> + * + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H + +#include <asm/clkdev.h> + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + + +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) +#define CK_243X (1 << 4) +#define CK_242X (1 << 5) +#define CK_343X (1 << 6) +#define CK_3430ES1 (1 << 7) +#define CK_3430ES2 (1 << 8) +#define CK_443X (1 << 9) + +#endif + diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 4b8b0d65cbf2..309b6d1dccdb 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -13,6 +13,8 @@ #ifndef __ARCH_ARM_OMAP_CLOCK_H #define __ARCH_ARM_OMAP_CLOCK_H +#include <linux/list.h> + struct module; struct clk; struct clockdomain; @@ -148,6 +150,8 @@ extern const struct clkops clkops_null; #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ #define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ +#define CLOCK_IN_OMAP4430 (1 << 13) +#define ALWAYS_ENABLED (1 << 14) /* bits 13-31 are currently free */ /* Clksel_rate flags */ @@ -156,6 +160,7 @@ extern const struct clkops clkops_null; #define RATE_IN_243X (1 << 2) #define RATE_IN_343X (1 << 3) /* rates common to all 343X */ #define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ +#define RATE_IN_4430 (1 << 5) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 064f1730f43b..32c22272425d 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -27,7 +27,7 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H -#include <linux/i2c.h> +#include <plat/i2c.h> struct sys_timer; @@ -36,18 +36,6 @@ extern void __iomem *gic_cpu_base_addr; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif /* IO bases for various OMAP processors */ struct omap_globals { @@ -58,6 +46,7 @@ struct omap_globals { void __iomem *ctrl; /* System Control Module */ void __iomem *prm; /* Power and Reset Management */ void __iomem *cm; /* Clock Management */ + void __iomem *cm2; }; void omap2_set_globals_242x(void); @@ -71,4 +60,24 @@ void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); +/** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + */ +#define omap_test_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2e1789001dfe..9a028bdebb06 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -176,11 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) +IS_OMAP_CLASS(44xx, 0x44) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) +IS_OMAP_SUBCLASS(443x, 0x443) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -393,11 +395,11 @@ IS_OMAP_TYPE(3517, 0x3517) (!omap3_has_iva()) && \ (!omap3_has_sgx())) # define cpu_is_omap3515() (cpu_is_omap3430() && \ - (omap3_has_iva()) && \ - (!omap3_has_sgx())) + (!omap3_has_iva()) && \ + (omap3_has_sgx())) # define cpu_is_omap3525() (cpu_is_omap3430() && \ - (omap3_has_sgx()) && \ - (!omap3_has_iva())) + (!omap3_has_sgx()) && \ + (omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) # define cpu_is_omap3505() is_omap3505() # define cpu_is_omap3517() is_omap3517() @@ -408,8 +410,8 @@ IS_OMAP_TYPE(3517, 0x3517) # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x -# define cpu_is_omap44xx() 1 -# define cpu_is_omap443x() 1 +# define cpu_is_omap44xx() is_omap44xx() +# define cpu_is_omap443x() is_omap443x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -436,14 +438,15 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_0 0x36300034 #define OMAP35XX_CLASS 0x35000034 -#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12)) -#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) -#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12)) -#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12)) -#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 12)) -#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 12)) - -#define OMAP443X_CLASS 0x44300034 +#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) +#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8)) +#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8)) +#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8)) +#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8)) +#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) + +#define OMAP443X_CLASS 0x44300044 +#define OMAP4430_REV_ES1_0 0x44300044 /* * omap_chip bits diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h new file mode 100644 index 000000000000..c66e464732df --- /dev/null +++ b/arch/arm/plat-omap/include/plat/display.h @@ -0,0 +1,575 @@ +/* + * linux/include/asm-arm/arch-omap/display.h + * + * Copyright (C) 2008 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __ASM_ARCH_OMAP_DISPLAY_H +#define __ASM_ARCH_OMAP_DISPLAY_H + +#include <linux/list.h> +#include <linux/kobject.h> +#include <linux/device.h> +#include <asm/atomic.h> + +#define DISPC_IRQ_FRAMEDONE (1 << 0) +#define DISPC_IRQ_VSYNC (1 << 1) +#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) +#define DISPC_IRQ_EVSYNC_ODD (1 << 3) +#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) +#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) +#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) +#define DISPC_IRQ_GFX_END_WIN (1 << 7) +#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) +#define DISPC_IRQ_OCP_ERR (1 << 9) +#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) +#define DISPC_IRQ_VID1_END_WIN (1 << 11) +#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) +#define DISPC_IRQ_VID2_END_WIN (1 << 13) +#define DISPC_IRQ_SYNC_LOST (1 << 14) +#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) +#define DISPC_IRQ_WAKEUP (1 << 16) + +struct omap_dss_device; +struct omap_overlay_manager; + +enum omap_display_type { + OMAP_DISPLAY_TYPE_NONE = 0, + OMAP_DISPLAY_TYPE_DPI = 1 << 0, + OMAP_DISPLAY_TYPE_DBI = 1 << 1, + OMAP_DISPLAY_TYPE_SDI = 1 << 2, + OMAP_DISPLAY_TYPE_DSI = 1 << 3, + OMAP_DISPLAY_TYPE_VENC = 1 << 4, +}; + +enum omap_plane { + OMAP_DSS_GFX = 0, + OMAP_DSS_VIDEO1 = 1, + OMAP_DSS_VIDEO2 = 2 +}; + +enum omap_channel { + OMAP_DSS_CHANNEL_LCD = 0, + OMAP_DSS_CHANNEL_DIGIT = 1, +}; + +enum omap_color_mode { + OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ + OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ + OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ + OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ + OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ + OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ + OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ + OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ + OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ + OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ + OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ + OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ + OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ + OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ + + OMAP_DSS_COLOR_GFX_OMAP2 = + OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | + OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 | + OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P, + + OMAP_DSS_COLOR_VID_OMAP2 = + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 | + OMAP_DSS_COLOR_UYVY, + + OMAP_DSS_COLOR_GFX_OMAP3 = + OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 | + OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 | + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 | + OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, + + OMAP_DSS_COLOR_VID1_OMAP3 = + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 | + OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P | + OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY, + + OMAP_DSS_COLOR_VID2_OMAP3 = + OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 | + OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U | + OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 | + OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 | + OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32, +}; + +enum omap_lcd_display_type { + OMAP_DSS_LCD_DISPLAY_STN, + OMAP_DSS_LCD_DISPLAY_TFT, +}; + +enum omap_dss_load_mode { + OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, + OMAP_DSS_LOAD_CLUT_ONLY = 1, + OMAP_DSS_LOAD_FRAME_ONLY = 2, + OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, +}; + +enum omap_dss_trans_key_type { + OMAP_DSS_COLOR_KEY_GFX_DST = 0, + OMAP_DSS_COLOR_KEY_VID_SRC = 1, +}; + +enum omap_rfbi_te_mode { + OMAP_DSS_RFBI_TE_MODE_1 = 1, + OMAP_DSS_RFBI_TE_MODE_2 = 2, +}; + +enum omap_panel_config { + OMAP_DSS_LCD_IVS = 1<<0, + OMAP_DSS_LCD_IHS = 1<<1, + OMAP_DSS_LCD_IPC = 1<<2, + OMAP_DSS_LCD_IEO = 1<<3, + OMAP_DSS_LCD_RF = 1<<4, + OMAP_DSS_LCD_ONOFF = 1<<5, + + OMAP_DSS_LCD_TFT = 1<<20, +}; + +enum omap_dss_venc_type { + OMAP_DSS_VENC_TYPE_COMPOSITE, + OMAP_DSS_VENC_TYPE_SVIDEO, +}; + +enum omap_display_caps { + OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, + OMAP_DSS_DISPLAY_CAP_TEAR_ELIM = 1 << 1, +}; + +enum omap_dss_update_mode { + OMAP_DSS_UPDATE_DISABLED = 0, + OMAP_DSS_UPDATE_AUTO, + OMAP_DSS_UPDATE_MANUAL, +}; + +enum omap_dss_display_state { + OMAP_DSS_DISPLAY_DISABLED = 0, + OMAP_DSS_DISPLAY_ACTIVE, + OMAP_DSS_DISPLAY_SUSPENDED, +}; + +/* XXX perhaps this should be removed */ +enum omap_dss_overlay_managers { + OMAP_DSS_OVL_MGR_LCD, + OMAP_DSS_OVL_MGR_TV, +}; + +enum omap_dss_rotation_type { + OMAP_DSS_ROT_DMA = 0, + OMAP_DSS_ROT_VRFB = 1, +}; + +/* clockwise rotation angle */ +enum omap_dss_rotation_angle { + OMAP_DSS_ROT_0 = 0, + OMAP_DSS_ROT_90 = 1, + OMAP_DSS_ROT_180 = 2, + OMAP_DSS_ROT_270 = 3, +}; + +enum omap_overlay_caps { + OMAP_DSS_OVL_CAP_SCALE = 1 << 0, + OMAP_DSS_OVL_CAP_DISPC = 1 << 1, +}; + +enum omap_overlay_manager_caps { + OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, +}; + +/* RFBI */ + +struct rfbi_timings { + int cs_on_time; + int cs_off_time; + int we_on_time; + int we_off_time; + int re_on_time; + int re_off_time; + int we_cycle_time; + int re_cycle_time; + int cs_pulse_width; + int access_time; + + int clk_div; + + u32 tim[5]; /* set by rfbi_convert_timings() */ + + int converted; +}; + +void omap_rfbi_write_command(const void *buf, u32 len); +void omap_rfbi_read_data(void *buf, u32 len); +void omap_rfbi_write_data(const void *buf, u32 len); +void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, + u16 x, u16 y, + u16 w, u16 h); +int omap_rfbi_enable_te(bool enable, unsigned line); +int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, + unsigned hs_pulse_time, unsigned vs_pulse_time, + int hs_pol_inv, int vs_pol_inv, int extif_div); + +/* DSI */ +void dsi_bus_lock(void); +void dsi_bus_unlock(void); +int dsi_vc_dcs_write(int channel, u8 *data, int len); +int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); +int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); +int dsi_vc_set_max_rx_packet_size(int channel, u16 len); +int dsi_vc_send_null(int channel); +int dsi_vc_send_bta_sync(int channel); + +/* Board specific data */ +struct omap_dss_board_info { + int (*get_last_off_on_transaction_id)(struct device *dev); + int num_devices; + struct omap_dss_device **devices; + struct omap_dss_device *default_device; +}; + +struct omap_video_timings { + /* Unit: pixels */ + u16 x_res; + /* Unit: pixels */ + u16 y_res; + /* Unit: KHz */ + u32 pixel_clock; + /* Unit: pixel clocks */ + u16 hsw; /* Horizontal synchronization pulse width */ + /* Unit: pixel clocks */ + u16 hfp; /* Horizontal front porch */ + /* Unit: pixel clocks */ + u16 hbp; /* Horizontal back porch */ + /* Unit: line clocks */ + u16 vsw; /* Vertical synchronization pulse width */ + /* Unit: line clocks */ + u16 vfp; /* Vertical front porch */ + /* Unit: line clocks */ + u16 vbp; /* Vertical back porch */ +}; + +#ifdef CONFIG_OMAP2_DSS_VENC +/* Hardcoded timings for tv modes. Venc only uses these to + * identify the mode, and does not actually use the configs + * itself. However, the configs should be something that + * a normal monitor can also show */ +const extern struct omap_video_timings omap_dss_pal_timings; +const extern struct omap_video_timings omap_dss_ntsc_timings; +#endif + +struct omap_overlay_info { + bool enabled; + + u32 paddr; + void __iomem *vaddr; + u16 screen_width; + u16 width; + u16 height; + enum omap_color_mode color_mode; + u8 rotation; + enum omap_dss_rotation_type rotation_type; + bool mirror; + + u16 pos_x; + u16 pos_y; + u16 out_width; /* if 0, out_width == width */ + u16 out_height; /* if 0, out_height == height */ + u8 global_alpha; +}; + +struct omap_overlay { + struct kobject kobj; + struct list_head list; + + /* static fields */ + const char *name; + int id; + enum omap_color_mode supported_modes; + enum omap_overlay_caps caps; + + /* dynamic fields */ + struct omap_overlay_manager *manager; + struct omap_overlay_info info; + + /* if true, info has been changed, but not applied() yet */ + bool info_dirty; + + int (*set_manager)(struct omap_overlay *ovl, + struct omap_overlay_manager *mgr); + int (*unset_manager)(struct omap_overlay *ovl); + + int (*set_overlay_info)(struct omap_overlay *ovl, + struct omap_overlay_info *info); + void (*get_overlay_info)(struct omap_overlay *ovl, + struct omap_overlay_info *info); + + int (*wait_for_go)(struct omap_overlay *ovl); +}; + +struct omap_overlay_manager_info { + u32 default_color; + + enum omap_dss_trans_key_type trans_key_type; + u32 trans_key; + bool trans_enabled; + + bool alpha_enabled; +}; + +struct omap_overlay_manager { + struct kobject kobj; + struct list_head list; + + /* static fields */ + const char *name; + int id; + enum omap_overlay_manager_caps caps; + int num_overlays; + struct omap_overlay **overlays; + enum omap_display_type supported_displays; + + /* dynamic fields */ + struct omap_dss_device *device; + struct omap_overlay_manager_info info; + + bool device_changed; + /* if true, info has been changed but not applied() yet */ + bool info_dirty; + + int (*set_device)(struct omap_overlay_manager *mgr, + struct omap_dss_device *dssdev); + int (*unset_device)(struct omap_overlay_manager *mgr); + + int (*set_manager_info)(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info); + void (*get_manager_info)(struct omap_overlay_manager *mgr, + struct omap_overlay_manager_info *info); + + int (*apply)(struct omap_overlay_manager *mgr); + int (*wait_for_go)(struct omap_overlay_manager *mgr); +}; + +struct omap_dss_device { + struct device dev; + + enum omap_display_type type; + + union { + struct { + u8 data_lines; + } dpi; + + struct { + u8 channel; + u8 data_lines; + } rfbi; + + struct { + u8 datapairs; + } sdi; + + struct { + u8 clk_lane; + u8 clk_pol; + u8 data1_lane; + u8 data1_pol; + u8 data2_lane; + u8 data2_pol; + + struct { + u16 regn; + u16 regm; + u16 regm3; + u16 regm4; + + u16 lp_clk_div; + + u16 lck_div; + u16 pck_div; + } div; + + bool ext_te; + u8 ext_te_gpio; + } dsi; + + struct { + enum omap_dss_venc_type type; + bool invert_polarity; + } venc; + } phy; + + struct { + struct omap_video_timings timings; + + int acbi; /* ac-bias pin transitions per interrupt */ + /* Unit: line clocks */ + int acb; /* ac-bias pin frequency */ + + enum omap_panel_config config; + + u8 recommended_bpp; + + struct omap_dss_device *ctrl; + } panel; + + struct { + u8 pixel_size; + struct rfbi_timings rfbi_timings; + struct omap_dss_device *panel; + } ctrl; + + int reset_gpio; + + int max_backlight_level; + + const char *name; + + /* used to match device to driver */ + const char *driver_name; + + void *data; + + struct omap_dss_driver *driver; + + /* helper variable for driver suspend/resume */ + bool activate_after_resume; + + enum omap_display_caps caps; + + struct omap_overlay_manager *manager; + + enum omap_dss_display_state state; + + int (*enable)(struct omap_dss_device *dssdev); + void (*disable)(struct omap_dss_device *dssdev); + + int (*suspend)(struct omap_dss_device *dssdev); + int (*resume)(struct omap_dss_device *dssdev); + + void (*get_resolution)(struct omap_dss_device *dssdev, + u16 *xres, u16 *yres); + int (*get_recommended_bpp)(struct omap_dss_device *dssdev); + + int (*check_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*set_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + void (*get_timings)(struct omap_dss_device *dssdev, + struct omap_video_timings *timings); + int (*update)(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h); + int (*sync)(struct omap_dss_device *dssdev); + int (*wait_vsync)(struct omap_dss_device *dssdev); + + int (*set_update_mode)(struct omap_dss_device *dssdev, + enum omap_dss_update_mode); + enum omap_dss_update_mode (*get_update_mode) + (struct omap_dss_device *dssdev); + + int (*enable_te)(struct omap_dss_device *dssdev, bool enable); + int (*get_te)(struct omap_dss_device *dssdev); + + u8 (*get_rotate)(struct omap_dss_device *dssdev); + int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); + + bool (*get_mirror)(struct omap_dss_device *dssdev); + int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); + + int (*run_test)(struct omap_dss_device *dssdev, int test); + int (*memory_read)(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h); + + int (*set_wss)(struct omap_dss_device *dssdev, u32 wss); + u32 (*get_wss)(struct omap_dss_device *dssdev); + + /* platform specific */ + int (*platform_enable)(struct omap_dss_device *dssdev); + void (*platform_disable)(struct omap_dss_device *dssdev); + int (*set_backlight)(struct omap_dss_device *dssdev, int level); + int (*get_backlight)(struct omap_dss_device *dssdev); +}; + +struct omap_dss_driver { + struct device_driver driver; + + int (*probe)(struct omap_dss_device *); + void (*remove)(struct omap_dss_device *); + + int (*enable)(struct omap_dss_device *display); + void (*disable)(struct omap_dss_device *display); + int (*suspend)(struct omap_dss_device *display); + int (*resume)(struct omap_dss_device *display); + int (*run_test)(struct omap_dss_device *display, int test); + + void (*setup_update)(struct omap_dss_device *dssdev, + u16 x, u16 y, u16 w, u16 h); + + int (*enable_te)(struct omap_dss_device *dssdev, bool enable); + int (*wait_for_te)(struct omap_dss_device *dssdev); + + u8 (*get_rotate)(struct omap_dss_device *dssdev); + int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); + + bool (*get_mirror)(struct omap_dss_device *dssdev); + int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); + + int (*memory_read)(struct omap_dss_device *dssdev, + void *buf, size_t size, + u16 x, u16 y, u16 w, u16 h); +}; + +int omap_dss_register_driver(struct omap_dss_driver *); +void omap_dss_unregister_driver(struct omap_dss_driver *); + +int omap_dss_register_device(struct omap_dss_device *); +void omap_dss_unregister_device(struct omap_dss_device *); + +void omap_dss_get_device(struct omap_dss_device *dssdev); +void omap_dss_put_device(struct omap_dss_device *dssdev); +#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL) +struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from); +struct omap_dss_device *omap_dss_find_device(void *data, + int (*match)(struct omap_dss_device *dssdev, void *data)); + +int omap_dss_start_device(struct omap_dss_device *dssdev); +void omap_dss_stop_device(struct omap_dss_device *dssdev); + +int omap_dss_get_num_overlay_managers(void); +struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); + +int omap_dss_get_num_overlays(void); +struct omap_overlay *omap_dss_get_overlay(int num); + +typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); +int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); +int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask); + +int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout); +int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, + unsigned long timeout); + +#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver) +#define to_dss_device(x) container_of((x), struct omap_dss_device, dev) + +#endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 1c017b29b7e9..4ede9e17a0be 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -401,33 +401,6 @@ /*----------------------------------------------------------------------------*/ -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -441,6 +414,8 @@ #define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) #define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) +#define OMAP_DMA_CCR_EN (1 << 7) + #define OMAP_DMA_DATA_TYPE_S8 0x00 #define OMAP_DMA_DATA_TYPE_S16 0x01 #define OMAP_DMA_DATA_TYPE_S32 0x02 @@ -503,14 +478,6 @@ #define DMA_CH_PRIO_HIGH 0x1 #define DMA_CH_PRIO_LOW 0x0 /* Def */ -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - enum omap_dma_burst_mode { OMAP_DMA_DATA_BURST_DIS = 0, OMAP_DMA_DATA_BURST_4, @@ -661,20 +628,13 @@ extern int omap_modify_dma_chain_params(int chain_id, extern int omap_dma_chain_status(int chain_id); #endif -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include <mach/lcd_dma.h> +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 696e0ca051b7..e081338e0b23 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -45,7 +45,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) +#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2) #define GPMC_CONFIG1_MUXADDDATA (1 << 9) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h new file mode 100644 index 000000000000..585d9ca68b97 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +int omap_plat_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index ce5dd2d1dc21..97d6c50c3dcb 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -472,8 +472,22 @@ #endif #define TWL4030_GPIO_IRQ_END (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS) +#define TWL6030_IRQ_BASE (OMAP_FPGA_IRQ_END) +#ifdef CONFIG_TWL4030_CORE +#define TWL6030_BASE_NR_IRQS 20 +#else +#define TWL6030_BASE_NR_IRQS 0 +#endif +#define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) + /* Total number of interrupts depends on the enabled blocks above */ -#define NR_IRQS TWL4030_GPIO_IRQ_END +#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END) +#define TWL_IRQ_END TWL4030_GPIO_IRQ_END +#else +#define TWL_IRQ_END TWL6030_IRQ_END +#endif + +#define NR_IRQS TWL_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index ba77de601501..8f069cc80350 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -130,58 +130,11 @@ #define OMAP2_PULL_UP (1 << 4) #define OMAP2_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ -#define OMAP3_INPUT_EN (1 << 8) -#define OMAP3_OFF_EN (1 << 9) -#define OMAP3_OFFOUT_EN (1 << 10) -#define OMAP3_OFFOUT_VAL (1 << 11) -#define OMAP3_OFF_PULL_EN (1 << 12) -#define OMAP3_OFF_PULL_UP (1 << 13) -#define OMAP3_WAKEUP_EN (1 << 14) - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP34XX_MUX_MODE0 0 -#define OMAP34XX_MUX_MODE1 1 -#define OMAP34XX_MUX_MODE2 2 -#define OMAP34XX_MUX_MODE3 3 -#define OMAP34XX_MUX_MODE4 4 -#define OMAP34XX_MUX_MODE5 5 -#define OMAP34XX_MUX_MODE6 6 -#define OMAP34XX_MUX_MODE7 7 - -/* 34xx active pin states */ -#define OMAP34XX_PIN_OUTPUT 0 -#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN -#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ - | OMAP2_PULL_UP) -#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) - -/* 34xx off mode states */ -#define OMAP34XX_PIN_OFF_NONE 0 -#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ - | OMAP3_OFFOUT_VAL) -#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) -#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ - | OMAP3_OFF_PULL_UP) -#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) -#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN - -#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ - .name = desc, \ - .debug = 0, \ - .mux_reg = reg_offset, \ - .mux_val = mux_value \ -}, - struct pin_config { char *name; const unsigned int mux_reg; unsigned char debug; -#if defined(CONFIG_ARCH_OMAP34XX) - u16 mux_val; /* Wake-up, off mode, pull, mux mode */ -#endif - #if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -219,11 +172,17 @@ enum omap7xx_index { AA17_7XX_USB_DM, W16_7XX_USB_PU_EN, W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, /* MMC */ MMC_7XX_CMD, MMC_7XX_CLK, MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, }; enum omap1xxx_index { @@ -681,181 +640,6 @@ enum omap24xx_index { }; -enum omap34xx_index { - /* 34xx I2C */ - K21_34XX_I2C1_SCL, - J21_34XX_I2C1_SDA, - AF15_34XX_I2C2_SCL, - AE15_34XX_I2C2_SDA, - AF14_34XX_I2C3_SCL, - AG14_34XX_I2C3_SDA, - AD26_34XX_I2C4_SCL, - AE26_34XX_I2C4_SDA, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ - Y8_3430_USB1HS_PHY_CLK, - Y9_3430_USB1HS_PHY_STP, - AA14_3430_USB1HS_PHY_DIR, - AA11_3430_USB1HS_PHY_NXT, - W13_3430_USB1HS_PHY_DATA0, - W12_3430_USB1HS_PHY_DATA1, - W11_3430_USB1HS_PHY_DATA2, - Y11_3430_USB1HS_PHY_DATA3, - W9_3430_USB1HS_PHY_DATA4, - Y12_3430_USB1HS_PHY_DATA5, - W8_3430_USB1HS_PHY_DATA6, - Y13_3430_USB1HS_PHY_DATA7, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ - AA8_3430_USB2HS_PHY_CLK, - AA10_3430_USB2HS_PHY_STP, - AA9_3430_USB2HS_PHY_DIR, - AB11_3430_USB2HS_PHY_NXT, - AB10_3430_USB2HS_PHY_DATA0, - AB9_3430_USB2HS_PHY_DATA1, - W3_3430_USB2HS_PHY_DATA2, - T4_3430_USB2HS_PHY_DATA3, - T3_3430_USB2HS_PHY_DATA4, - R3_3430_USB2HS_PHY_DATA5, - R4_3430_USB2HS_PHY_DATA6, - T2_3430_USB2HS_PHY_DATA7, - - - /* TLL - HSUSB: 12-pin TLL Port 1*/ - Y8_3430_USB1HS_TLL_CLK, - Y9_3430_USB1HS_TLL_STP, - AA14_3430_USB1HS_TLL_DIR, - AA11_3430_USB1HS_TLL_NXT, - W13_3430_USB1HS_TLL_DATA0, - W12_3430_USB1HS_TLL_DATA1, - W11_3430_USB1HS_TLL_DATA2, - Y11_3430_USB1HS_TLL_DATA3, - W9_3430_USB1HS_TLL_DATA4, - Y12_3430_USB1HS_TLL_DATA5, - W8_3430_USB1HS_TLL_DATA6, - Y13_3430_USB1HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 2*/ - AA8_3430_USB2HS_TLL_CLK, - AA10_3430_USB2HS_TLL_STP, - AA9_3430_USB2HS_TLL_DIR, - AB11_3430_USB2HS_TLL_NXT, - AB10_3430_USB2HS_TLL_DATA0, - AB9_3430_USB2HS_TLL_DATA1, - W3_3430_USB2HS_TLL_DATA2, - T4_3430_USB2HS_TLL_DATA3, - T3_3430_USB2HS_TLL_DATA4, - R3_3430_USB2HS_TLL_DATA5, - R4_3430_USB2HS_TLL_DATA6, - T2_3430_USB2HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 3*/ - AA6_3430_USB3HS_TLL_CLK, - AB3_3430_USB3HS_TLL_STP, - AA3_3430_USB3HS_TLL_DIR, - Y3_3430_USB3HS_TLL_NXT, - AA5_3430_USB3HS_TLL_DATA0, - Y4_3430_USB3HS_TLL_DATA1, - Y5_3430_USB3HS_TLL_DATA2, - W5_3430_USB3HS_TLL_DATA3, - AB12_3430_USB3HS_TLL_DATA4, - AB13_3430_USB3HS_TLL_DATA5, - AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7, - - /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ - AF10_3430_USB1FS_PHY_MM1_RXDP, - AG9_3430_USB1FS_PHY_MM1_RXDM, - W13_3430_USB1FS_PHY_MM1_RXRCV, - W12_3430_USB1FS_PHY_MM1_TXSE0, - W11_3430_USB1FS_PHY_MM1_TXDAT, - Y11_3430_USB1FS_PHY_MM1_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ - AF7_3430_USB2FS_PHY_MM2_RXDP, - AH7_3430_USB2FS_PHY_MM2_RXDM, - AB10_3430_USB2FS_PHY_MM2_RXRCV, - AB9_3430_USB2FS_PHY_MM2_TXSE0, - W3_3430_USB2FS_PHY_MM2_TXDAT, - T4_3430_USB2FS_PHY_MM2_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ - AH3_3430_USB3FS_PHY_MM3_RXDP, - AE3_3430_USB3FS_PHY_MM3_RXDM, - AD1_3430_USB3FS_PHY_MM3_RXRCV, - AE1_3430_USB3FS_PHY_MM3_TXSE0, - AD2_3430_USB3FS_PHY_MM3_TXDAT, - AC1_3430_USB3FS_PHY_MM3_TXEN_N, - - /* 34xx GPIO - * - normally these are bidirectional, no internal pullup/pulldown - * - "_UP" suffix (GPIO3_UP) if internal pullup is configured - * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown - * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) - */ - AF26_34XX_GPIO0, - AF22_34XX_GPIO9, - AG9_34XX_GPIO23, - AH8_34XX_GPIO29, - U8_34XX_GPIO54_OUT, - U8_34XX_GPIO54_DOWN, - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, - AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, - AF5_34XX_GPIO142, - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, - - /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ - H16_34XX_SDRC_CKE0, - H17_34XX_SDRC_CKE1, - - /* MMC1 */ - N28_3430_MMC1_CLK, - M27_3430_MMC1_CMD, - N27_3430_MMC1_DAT0, - N26_3430_MMC1_DAT1, - N25_3430_MMC1_DAT2, - P28_3430_MMC1_DAT3, - P27_3430_MMC1_DAT4, - P26_3430_MMC1_DAT5, - R27_3430_MMC1_DAT6, - R25_3430_MMC1_DAT7, - - /* MMC2 */ - AE2_3430_MMC2_CLK, - AG5_3430_MMC2_CMD, - AH5_3430_MMC2_DAT0, - AH4_3430_MMC2_DAT1, - AG4_3430_MMC2_DAT2, - AF4_3430_MMC2_DAT3, - AE4_3430_MMC2_DAT4, - AH3_3430_MMC2_DAT5, - AF3_3430_MMC2_DAT6, - AE3_3430_MMC2_DAT7, - - /* MMC3 */ - AF10_3430_MMC3_CLK, - AC3_3430_MMC3_CMD, - AE11_3430_MMC3_DAT0, - AH9_3430_MMC3_DAT1, - AF13_3430_MMC3_DAT2, - AF13_3430_MMC3_DAT3, - - /* SYS_NIRQ T2 INT1 */ - AF26_34XX_SYS_NIRQ, - - /* EHCI GPIO's for OMAP3EVM (Rev >= E) */ - AH14_34XX_GPIO21, - AF9_34XX_GPIO22, - U3_34XX_GPIO61, -}; - struct omap_mux_cfg { struct pin_config *pins; unsigned long size; @@ -865,14 +649,14 @@ struct omap_mux_cfg { #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ extern int omap1_mux_init(void); -extern int omap2_mux_init(void); extern int omap_mux_register(struct omap_mux_cfg *); extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } #endif +extern int omap2_mux_init(void); + #endif diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index e52902a15c1a..ef870de43c29 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -26,8 +26,10 @@ #define OMAP44XX_EMIF2_BASE 0x4d000000 #define OMAP44XX_DMM_BASE 0x4e000000 #define OMAP4430_32KSYNCT_BASE 0x4a304000 -#define OMAP4430_CM_BASE 0x4a004000 -#define OMAP4430_PRM_BASE 0x48306000 +#define OMAP4430_CM1_BASE 0x4a004000 +#define OMAP4430_CM_BASE OMAP4430_CM1_BASE +#define OMAP4430_CM2_BASE 0x4a008000 +#define OMAP4430_PRM_BASE 0x4a306000 #define OMAP44XX_GPMC_BASE 0x50000000 #define OMAP443X_SCM_BASE 0x4a002000 #define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 11a9773a4e7f..dc1fac1d805c 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -50,8 +50,8 @@ * @pm_lats: ptr to an omap_device_pm_latency table * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats * @pm_lat_level: array index of the last odpl entry executed - -1 if never - * @dev_wakeup_lat: dev wakeup latency in microseconds - * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM + * @dev_wakeup_lat: dev wakeup latency in nanoseconds + * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM * @_state: one of OMAP_DEVICE_STATE_* (see above) * @flags: device flags * @@ -137,5 +137,7 @@ struct omap_device_pm_latency { }; -#endif +/* Get omap_device pointer from platform_device pointer */ +#define to_omap_device(x) container_of((x), struct omap_device, pdev) +#endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index dbdd123eca16..007935a921ea 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -50,6 +50,8 @@ struct omap_device; #define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT) #define SYSC_SOFTRESET_SHIFT 1 #define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT) +#define SYSC_AUTOIDLE_SHIFT 0 +#define SYSC_AUTOIDLE_MASK (1 << SYSC_AUTOIDLE_SHIFT) /* OCP SYSSTATUS bit shifts/masks */ #define SYSS_RESETDONE_SHIFT 0 @@ -62,7 +64,21 @@ struct omap_device; /** - * struct omap_hwmod_dma_info - MPU address space handled by the hwmod + * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod + * @name: name of the IRQ channel (module local name) + * @irq_ch: IRQ channel ID + * + * @name should be something short, e.g., "tx" or "rx". It is for use + * by platform_get_resource_byname(). It is defined locally to the + * hwmod. + */ +struct omap_hwmod_irq_info { + const char *name; + u16 irq; +}; + +/** + * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) * @dma_ch: DMA channel ID * @@ -294,13 +310,17 @@ struct omap_hwmod_omap4_prcm { * SDRAM controller, etc. * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM * controller, etc. + * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) + * when module is enabled, rather than the default, which is to + * enable autoidle * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) #define HWMOD_INIT_NO_RESET (1 << 2) #define HWMOD_INIT_NO_IDLE (1 << 3) -#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 4) +#define HWMOD_NO_OCP_AUTOIDLE (1 << 4) +#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) /* * omap_hwmod._int_flags definitions @@ -373,7 +393,7 @@ struct omap_hwmod_omap4_prcm { struct omap_hwmod { const char *name; struct omap_device *od; - u8 *mpu_irqs; + struct omap_hwmod_irq_info *mpu_irqs; struct omap_hwmod_dma_info *sdma_chs; union { struct omap_hwmod_omap2_prcm omap2; diff --git a/arch/arm/plat-omap/include/plat/omapfb.h b/arch/arm/plat-omap/include/plat/omapfb.h deleted file mode 100644 index bfef7ab95f17..000000000000 --- a/arch/arm/plat-omap/include/plat/omapfb.h +++ /dev/null @@ -1,398 +0,0 @@ -/* - * File: arch/arm/plat-omap/include/mach/omapfb.h - * - * Framebuffer driver for TI OMAP boards - * - * Copyright (C) 2004 Nokia Corporation - * Author: Imre Deak <imre.deak@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#ifndef __OMAPFB_H -#define __OMAPFB_H - -#include <asm/ioctl.h> -#include <asm/types.h> - -/* IOCTL commands. */ - -#define OMAP_IOW(num, dtype) _IOW('O', num, dtype) -#define OMAP_IOR(num, dtype) _IOR('O', num, dtype) -#define OMAP_IOWR(num, dtype) _IOWR('O', num, dtype) -#define OMAP_IO(num) _IO('O', num) - -#define OMAPFB_MIRROR OMAP_IOW(31, int) -#define OMAPFB_SYNC_GFX OMAP_IO(37) -#define OMAPFB_VSYNC OMAP_IO(38) -#define OMAPFB_SET_UPDATE_MODE OMAP_IOW(40, int) -#define OMAPFB_GET_CAPS OMAP_IOR(42, struct omapfb_caps) -#define OMAPFB_GET_UPDATE_MODE OMAP_IOW(43, int) -#define OMAPFB_LCD_TEST OMAP_IOW(45, int) -#define OMAPFB_CTRL_TEST OMAP_IOW(46, int) -#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old) -#define OMAPFB_SET_COLOR_KEY OMAP_IOW(50, struct omapfb_color_key) -#define OMAPFB_GET_COLOR_KEY OMAP_IOW(51, struct omapfb_color_key) -#define OMAPFB_SETUP_PLANE OMAP_IOW(52, struct omapfb_plane_info) -#define OMAPFB_QUERY_PLANE OMAP_IOW(53, struct omapfb_plane_info) -#define OMAPFB_UPDATE_WINDOW OMAP_IOW(54, struct omapfb_update_window) -#define OMAPFB_SETUP_MEM OMAP_IOW(55, struct omapfb_mem_info) -#define OMAPFB_QUERY_MEM OMAP_IOW(56, struct omapfb_mem_info) - -#define OMAPFB_CAPS_GENERIC_MASK 0x00000fff -#define OMAPFB_CAPS_LCDC_MASK 0x00fff000 -#define OMAPFB_CAPS_PANEL_MASK 0xff000000 - -#define OMAPFB_CAPS_MANUAL_UPDATE 0x00001000 -#define OMAPFB_CAPS_TEARSYNC 0x00002000 -#define OMAPFB_CAPS_PLANE_RELOCATE_MEM 0x00004000 -#define OMAPFB_CAPS_PLANE_SCALE 0x00008000 -#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE 0x00010000 -#define OMAPFB_CAPS_WINDOW_SCALE 0x00020000 -#define OMAPFB_CAPS_WINDOW_OVERLAY 0x00040000 -#define OMAPFB_CAPS_WINDOW_ROTATE 0x00080000 -#define OMAPFB_CAPS_SET_BACKLIGHT 0x01000000 - -/* Values from DSP must map to lower 16-bits */ -#define OMAPFB_FORMAT_MASK 0x00ff -#define OMAPFB_FORMAT_FLAG_DOUBLE 0x0100 -#define OMAPFB_FORMAT_FLAG_TEARSYNC 0x0200 -#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC 0x0400 -#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY 0x0800 -#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY 0x1000 - -#define OMAPFB_EVENT_READY 1 -#define OMAPFB_EVENT_DISABLED 2 - -#define OMAPFB_MEMTYPE_SDRAM 0 -#define OMAPFB_MEMTYPE_SRAM 1 -#define OMAPFB_MEMTYPE_MAX 1 - -enum omapfb_color_format { - OMAPFB_COLOR_RGB565 = 0, - OMAPFB_COLOR_YUV422, - OMAPFB_COLOR_YUV420, - OMAPFB_COLOR_CLUT_8BPP, - OMAPFB_COLOR_CLUT_4BPP, - OMAPFB_COLOR_CLUT_2BPP, - OMAPFB_COLOR_CLUT_1BPP, - OMAPFB_COLOR_RGB444, - OMAPFB_COLOR_YUY422, -}; - -struct omapfb_update_window { - __u32 x, y; - __u32 width, height; - __u32 format; - __u32 out_x, out_y; - __u32 out_width, out_height; - __u32 reserved[8]; -}; - -struct omapfb_update_window_old { - __u32 x, y; - __u32 width, height; - __u32 format; -}; - -enum omapfb_plane { - OMAPFB_PLANE_GFX = 0, - OMAPFB_PLANE_VID1, - OMAPFB_PLANE_VID2, -}; - -enum omapfb_channel_out { - OMAPFB_CHANNEL_OUT_LCD = 0, - OMAPFB_CHANNEL_OUT_DIGIT, -}; - -struct omapfb_plane_info { - __u32 pos_x; - __u32 pos_y; - __u8 enabled; - __u8 channel_out; - __u8 mirror; - __u8 reserved1; - __u32 out_width; - __u32 out_height; - __u32 reserved2[12]; -}; - -struct omapfb_mem_info { - __u32 size; - __u8 type; - __u8 reserved[3]; -}; - -struct omapfb_caps { - __u32 ctrl; - __u32 plane_color; - __u32 wnd_color; -}; - -enum omapfb_color_key_type { - OMAPFB_COLOR_KEY_DISABLED = 0, - OMAPFB_COLOR_KEY_GFX_DST, - OMAPFB_COLOR_KEY_VID_SRC, -}; - -struct omapfb_color_key { - __u8 channel_out; - __u32 background; - __u32 trans_key; - __u8 key_type; -}; - -enum omapfb_update_mode { - OMAPFB_UPDATE_DISABLED = 0, - OMAPFB_AUTO_UPDATE, - OMAPFB_MANUAL_UPDATE -}; - -#ifdef __KERNEL__ - -#include <linux/completion.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/mutex.h> - -#include <plat/board.h> - -#define OMAP_LCDC_INV_VSYNC 0x0001 -#define OMAP_LCDC_INV_HSYNC 0x0002 -#define OMAP_LCDC_INV_PIX_CLOCK 0x0004 -#define OMAP_LCDC_INV_OUTPUT_EN 0x0008 -#define OMAP_LCDC_HSVS_RISING_EDGE 0x0010 -#define OMAP_LCDC_HSVS_OPPOSITE 0x0020 - -#define OMAP_LCDC_SIGNAL_MASK 0x003f - -#define OMAP_LCDC_PANEL_TFT 0x0100 - -#define OMAPFB_PLANE_XRES_MIN 8 -#define OMAPFB_PLANE_YRES_MIN 8 - -#ifdef CONFIG_ARCH_OMAP1 -#define OMAPFB_PLANE_NUM 1 -#else -#define OMAPFB_PLANE_NUM 3 -#endif - -struct omapfb_device; - -struct lcd_panel { - const char *name; - int config; /* TFT/STN, signal inversion */ - int bpp; /* Pixel format in fb mem */ - int data_lines; /* Lines on LCD HW interface */ - - int x_res, y_res; - int pixel_clock; /* In kHz */ - int hsw; /* Horizontal synchronization - pulse width */ - int hfp; /* Horizontal front porch */ - int hbp; /* Horizontal back porch */ - int vsw; /* Vertical synchronization - pulse width */ - int vfp; /* Vertical front porch */ - int vbp; /* Vertical back porch */ - int acb; /* ac-bias pin frequency */ - int pcd; /* pixel clock divider. - Obsolete use pixel_clock instead */ - - int (*init) (struct lcd_panel *panel, - struct omapfb_device *fbdev); - void (*cleanup) (struct lcd_panel *panel); - int (*enable) (struct lcd_panel *panel); - void (*disable) (struct lcd_panel *panel); - unsigned long (*get_caps) (struct lcd_panel *panel); - int (*set_bklight_level)(struct lcd_panel *panel, - unsigned int level); - unsigned int (*get_bklight_level)(struct lcd_panel *panel); - unsigned int (*get_bklight_max) (struct lcd_panel *panel); - int (*run_test) (struct lcd_panel *panel, int test_num); -}; - -struct extif_timings { - int cs_on_time; - int cs_off_time; - int we_on_time; - int we_off_time; - int re_on_time; - int re_off_time; - int we_cycle_time; - int re_cycle_time; - int cs_pulse_width; - int access_time; - - int clk_div; - - u32 tim[5]; /* set by extif->convert_timings */ - - int converted; -}; - -struct lcd_ctrl_extif { - int (*init) (struct omapfb_device *fbdev); - void (*cleanup) (void); - void (*get_clk_info) (u32 *clk_period, u32 *max_clk_div); - unsigned long (*get_max_tx_rate)(void); - int (*convert_timings) (struct extif_timings *timings); - void (*set_timings) (const struct extif_timings *timings); - void (*set_bits_per_cycle)(int bpc); - void (*write_command) (const void *buf, unsigned int len); - void (*read_data) (void *buf, unsigned int len); - void (*write_data) (const void *buf, unsigned int len); - void (*transfer_area) (int width, int height, - void (callback)(void * data), void *data); - int (*setup_tearsync) (unsigned pin_cnt, - unsigned hs_pulse_time, unsigned vs_pulse_time, - int hs_pol_inv, int vs_pol_inv, int div); - int (*enable_tearsync) (int enable, unsigned line); - - unsigned long max_transmit_size; -}; - -struct omapfb_notifier_block { - struct notifier_block nb; - void *data; - int plane_idx; -}; - -typedef int (*omapfb_notifier_callback_t)(struct notifier_block *, - unsigned long event, - void *fbi); - -struct omapfb_mem_region { - u32 paddr; - void __iomem *vaddr; - unsigned long size; - u8 type; /* OMAPFB_PLANE_MEM_* */ - unsigned alloc:1; /* allocated by the driver */ - unsigned map:1; /* kernel mapped by the driver */ -}; - -struct omapfb_mem_desc { - int region_cnt; - struct omapfb_mem_region region[OMAPFB_PLANE_NUM]; -}; - -struct lcd_ctrl { - const char *name; - void *data; - - int (*init) (struct omapfb_device *fbdev, - int ext_mode, - struct omapfb_mem_desc *req_md); - void (*cleanup) (void); - void (*bind_client) (struct omapfb_notifier_block *nb); - void (*get_caps) (int plane, struct omapfb_caps *caps); - int (*set_update_mode)(enum omapfb_update_mode mode); - enum omapfb_update_mode (*get_update_mode)(void); - int (*setup_plane) (int plane, int channel_out, - unsigned long offset, - int screen_width, - int pos_x, int pos_y, int width, - int height, int color_mode); - int (*set_rotate) (int angle); - int (*setup_mem) (int plane, size_t size, - int mem_type, unsigned long *paddr); - int (*mmap) (struct fb_info *info, - struct vm_area_struct *vma); - int (*set_scale) (int plane, - int orig_width, int orig_height, - int out_width, int out_height); - int (*enable_plane) (int plane, int enable); - int (*update_window) (struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - void (*sync) (void); - void (*suspend) (void); - void (*resume) (void); - int (*run_test) (int test_num); - int (*setcolreg) (u_int regno, u16 red, u16 green, - u16 blue, u16 transp, - int update_hw_mem); - int (*set_color_key) (struct omapfb_color_key *ck); - int (*get_color_key) (struct omapfb_color_key *ck); -}; - -enum omapfb_state { - OMAPFB_DISABLED = 0, - OMAPFB_SUSPENDED= 99, - OMAPFB_ACTIVE = 100 -}; - -struct omapfb_plane_struct { - int idx; - struct omapfb_plane_info info; - enum omapfb_color_format color_mode; - struct omapfb_device *fbdev; -}; - -struct omapfb_device { - int state; - int ext_lcdc; /* Using external - LCD controller */ - struct mutex rqueue_mutex; - - int palette_size; - u32 pseudo_palette[17]; - - struct lcd_panel *panel; /* LCD panel */ - const struct lcd_ctrl *ctrl; /* LCD controller */ - const struct lcd_ctrl *int_ctrl; /* internal LCD ctrl */ - struct lcd_ctrl_extif *ext_if; /* LCD ctrl external - interface */ - struct device *dev; - struct fb_var_screeninfo new_var; /* for mode changes */ - - struct omapfb_mem_desc mem_desc; - struct fb_info *fb_info[OMAPFB_PLANE_NUM]; -}; - -struct omapfb_platform_data { - struct omap_lcd_config lcd; - struct omapfb_mem_desc mem_desc; - void *ctrl_platform_data; -}; - -#ifdef CONFIG_ARCH_OMAP1 -extern struct lcd_ctrl omap1_lcd_ctrl; -#else -extern struct lcd_ctrl omap2_disp_ctrl; -#endif - -extern void omapfb_reserve_sdram(void); -extern void omapfb_register_panel(struct lcd_panel *panel); -extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval); -extern void omapfb_notify_clients(struct omapfb_device *fbdev, - unsigned long event); -extern int omapfb_register_client(struct omapfb_notifier_block *nb, - omapfb_notifier_callback_t callback, - void *callback_data); -extern int omapfb_unregister_client(struct omapfb_notifier_block *nb); -extern int omapfb_update_window_async(struct fb_info *fbi, - struct omapfb_update_window *win, - void (*callback)(void *), - void *callback_data); - -/* in arch/arm/plat-omap/fb.c */ -extern void omapfb_set_ctrl_platform_data(void *pdata); - -#endif /* __KERNEL__ */ - -#endif /* __OMAPFB_H */ diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h index 3d45ee1d3cf4..0b960051eaed 100644 --- a/arch/arm/plat-omap/include/plat/powerdomain.h +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -28,6 +28,8 @@ #define PWRDM_POWER_INACTIVE 0x2 #define PWRDM_POWER_ON 0x3 +#define PWRDM_MAX_PWRSTS 4 + /* Powerdomain allowable state bitfields */ #define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ (1 << PWRDM_POWER_ON)) @@ -40,7 +42,10 @@ /* Powerdomain flags */ #define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ - +#define PWRDM_HAS_MPU_QUIRK (1 << 1) /* MPU pwr domain has MEM bank 0 bits + * in MEM bank 1 position. This is + * true for OMAP3430 + */ /* * Number of memory banks that are power-controllable. On OMAP3430, the @@ -85,15 +90,15 @@ struct powerdomain { /* Used to represent the OMAP chip types containing this pwrdm */ const struct omap_chip_id omap_chip; - /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ - const u8 dep_bit; - /* Powerdomains that can be told to wake this powerdomain up */ struct pwrdm_dep *wkdep_srcs; /* Powerdomains that can be told to keep this pwrdm from inactivity */ struct pwrdm_dep *sleepdep_srcs; + /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ + const u8 dep_bit; + /* Possible powerdomain power states */ const u8 pwrsts; @@ -118,11 +123,11 @@ struct powerdomain { struct list_head node; int state; - unsigned state_counter[4]; + unsigned state_counter[PWRDM_MAX_PWRSTS]; #ifdef CONFIG_PM_DEBUG s64 timer; - s64 state_timer[4]; + s64 state_timer[PWRDM_MAX_PWRSTS]; #endif }; diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index f704030d2a70..7b76f50564ba 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -94,7 +94,10 @@ /* SMS register offsets - read/write with sms_{read,write}_reg() */ -#define SMS_SYSCONFIG 0x010 +#define SMS_SYSCONFIG 0x010 +#define SMS_ROT_CONTROL(context) (0x180 + 0x10 * context) +#define SMS_ROT_SIZE(context) (0x184 + 0x10 * context) +#define SMS_ROT_PHYSICAL_BA(context) (0x188 + 0x10 * context) /* REVISIT: fill in other SMS registers here */ @@ -129,6 +132,10 @@ int omap2_sdrc_get_params(unsigned long r, void omap2_sms_save_context(void); void omap2_sms_restore_context(void); +void omap2_sms_write_rot_control(u32 val, unsigned ctx); +void omap2_sms_write_rot_size(u32 val, unsigned ctx); +void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx); + #ifdef CONFIG_ARCH_OMAP2 struct memory_timings { diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 9951345a25d6..f5a4a92393ef 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -53,6 +53,7 @@ #ifndef __ASSEMBLER__ extern void __init omap_serial_early_init(void); extern void omap_serial_init(void); +extern void omap_serial_init_port(int port); extern int omap_uart_can_sleep(void); extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index dcaa8fde7063..8983d54c4fd2 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -28,6 +28,8 @@ /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); +extern void omap_auxcoreboot_addr(u32 cpu_addr); /* * We use Soft IRQ1 as the IPI diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h new file mode 100644 index 000000000000..edd4987758a6 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/vram.h @@ -0,0 +1,62 @@ +/* + * VRAM manager for OMAP + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAP_VRAM_H__ +#define __OMAP_VRAM_H__ + +#include <linux/types.h> + +#define OMAP_VRAM_MEMTYPE_SDRAM 0 +#define OMAP_VRAM_MEMTYPE_SRAM 1 +#define OMAP_VRAM_MEMTYPE_MAX 1 + +extern int omap_vram_add_region(unsigned long paddr, size_t size); +extern int omap_vram_free(unsigned long paddr, size_t size); +extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); +extern int omap_vram_reserve(unsigned long paddr, size_t size); +extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, + unsigned long *largest_free_block); + +#ifdef CONFIG_OMAP2_VRAM +extern void omap_vram_set_sdram_vram(u32 size, u32 start); +extern void omap_vram_set_sram_vram(u32 size, u32 start); + +extern void omap_vram_reserve_sdram(void); +extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail); +#else +static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } +static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } + +static inline void omap_vram_reserve_sdram(void) { } +static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, + unsigned long sram_vstart, + unsigned long sram_size, + unsigned long pstart_avail, + unsigned long size_avail) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h new file mode 100644 index 000000000000..d8a03ced3b10 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/vrfb.h @@ -0,0 +1,50 @@ +/* + * VRFB Rotation Engine + * + * Copyright (C) 2009 Nokia Corporation + * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#ifndef __OMAP_VRFB_H__ +#define __OMAP_VRFB_H__ + +#define OMAP_VRFB_LINE_LEN 2048 + +struct vrfb { + u8 context; + void __iomem *vaddr[4]; + unsigned long paddr[4]; + u16 xres; + u16 yres; + u16 xoffset; + u16 yoffset; + u8 bytespp; + bool yuv_mode; +}; + +extern int omap_vrfb_request_ctx(struct vrfb *vrfb); +extern void omap_vrfb_release_ctx(struct vrfb *vrfb); +extern void omap_vrfb_adjust_size(u16 *width, u16 *height, + u8 bytespp); +extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp); +extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp); +extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr, + u16 width, u16 height, + unsigned bytespp, bool yuv_mode); +extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot); +extern void omap_vrfb_restore_context(void); + +#endif /* __VRFB_H */ diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 05aebcad215b..06703635ace1 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index) { struct pin_config *reg; - if (cpu_is_omap44xx()) - return 0; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", + index); + WARN_ON(1); + return -EINVAL; + } if (mux_cfg == NULL) { printk(KERN_ERR "Pin mux table not initialized\n"); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index bb16e624a557..1e5648d3e3d8 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -134,18 +134,18 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) break; - getnstimeofday(&a); + read_persistent_clock(&a); /* XXX check return code */ odpl->activate_func(od); - getnstimeofday(&b); + read_persistent_clock(&b); c = timespec_sub(b, a); - act_lat = timespec_to_ns(&c) * NSEC_PER_USEC; + act_lat = timespec_to_ns(&c); pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " - "%llu usec\n", od->pdev.name, od->pm_lat_level, + "%llu nsec\n", od->pdev.name, od->pm_lat_level, act_lat); WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: " @@ -190,18 +190,18 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) od->_dev_wakeup_lat_limit)) break; - getnstimeofday(&a); + read_persistent_clock(&a); /* XXX check return code */ odpl->deactivate_func(od); - getnstimeofday(&b); + read_persistent_clock(&b); c = timespec_sub(b, a); - deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC; + deact_lat = timespec_to_ns(&c); pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " - "%llu usec\n", od->pdev.name, od->pm_lat_level, + "%llu nsec\n", od->pdev.name, od->pm_lat_level, deact_lat); WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: " @@ -459,7 +459,7 @@ int omap_device_enable(struct platform_device *pdev) ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT); od->dev_wakeup_lat = 0; - od->_dev_wakeup_lat_limit = INT_MAX; + od->_dev_wakeup_lat_limit = UINT_MAX; od->_state = OMAP_DEVICE_STATE_ENABLED; return ret; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 3e923668778d..d8d5094b37ed 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -28,6 +28,7 @@ #include <plat/sram.h> #include <plat/board.h> #include <plat/cpu.h> +#include <plat/vram.h> #include <plat/control.h> @@ -47,8 +48,10 @@ #define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) -#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ -#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ +#define OMAP4_SRAM_PA 0x40300000 +#define OMAP4_SRAM_VA 0xfe400000 +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -139,6 +142,10 @@ void __init omap_detect_sram(void) } else { omap_sram_size = 0x8000; /* 32K */ } + } else if (cpu_is_omap44xx()) { + omap_sram_base = OMAP4_SRAM_PUB_VA; + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; @@ -152,7 +159,7 @@ void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_base = OMAP4_SRAM_VA; omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0x8000; /* 32K */ + omap_sram_size = 0xe000; /* 56K */ } else { omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; @@ -185,6 +192,13 @@ void __init omap_detect_sram(void) omap_sram_start + SRAM_BOOTLOADER_SZ, omap_sram_size - SRAM_BOOTLOADER_SZ); omap_sram_size -= reserved; + + reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base, + omap_sram_size, + omap_sram_start + SRAM_BOOTLOADER_SZ, + omap_sram_size - SRAM_BOOTLOADER_SZ); + omap_sram_size -= reserved; + omap_sram_ceil = omap_sram_base + omap_sram_size; } diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 51033a4503c3..d3bf17cd36f3 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -137,7 +137,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) if (is_device) { if (cpu_is_omap24xx()) omap_cfg_reg(J20_24XX_USB0_PUEN); - else + else if (cpu_is_omap7xx()) { + omap_cfg_reg(AA17_7XX_USB_DM); + omap_cfg_reg(W16_7XX_USB_PU_EN); + omap_cfg_reg(W17_7XX_USB_VBUSI); + omap_cfg_reg(W18_7XX_USB_DMCK_OUT); + omap_cfg_reg(W19_7XX_USB_DCRST); + } else omap_cfg_reg(W4_USB_PUEN); } diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 2d7423af1197..aed05bc3c2ea 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -38,16 +38,72 @@ union vfp_state *last_VFP_context[NR_CPUS]; */ unsigned int VFP_arch; +/* + * Per-thread VFP initialization. + */ +static void vfp_thread_flush(struct thread_info *thread) +{ + union vfp_state *vfp = &thread->vfpstate; + unsigned int cpu; + + memset(vfp, 0, sizeof(union vfp_state)); + + vfp->hard.fpexc = FPEXC_EN; + vfp->hard.fpscr = FPSCR_ROUND_NEAREST; + + /* + * Disable VFP to ensure we initialize it first. We must ensure + * that the modification of last_VFP_context[] and hardware disable + * are done for the same CPU and without preemption. + */ + cpu = get_cpu(); + if (last_VFP_context[cpu] == vfp) + last_VFP_context[cpu] = NULL; + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + put_cpu(); +} + +static void vfp_thread_release(struct thread_info *thread) +{ + /* release case: Per-thread VFP cleanup. */ + union vfp_state *vfp = &thread->vfpstate; + unsigned int cpu = thread->cpu; + + if (last_VFP_context[cpu] == vfp) + last_VFP_context[cpu] = NULL; +} + +/* + * When this function is called with the following 'cmd's, the following + * is true while this function is being run: + * THREAD_NOFTIFY_SWTICH: + * - the previously running thread will not be scheduled onto another CPU. + * - the next thread to be run (v) will not be running on another CPU. + * - thread->cpu is the local CPU number + * - not preemptible as we're called in the middle of a thread switch + * THREAD_NOTIFY_FLUSH: + * - the thread (v) will be running on the local CPU, so + * v === current_thread_info() + * - thread->cpu is the local CPU number at the time it is accessed, + * but may change at any time. + * - we could be preempted if tree preempt rcu is enabled, so + * it is unsafe to use thread->cpu. + * THREAD_NOTIFY_RELEASE: + * - the thread (v) will not be running on any CPU; it is a dead thread. + * - thread->cpu will be the last CPU the thread ran on, which may not + * be the current CPU. + * - we could be preempted if tree preempt rcu is enabled. + */ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) { struct thread_info *thread = v; - union vfp_state *vfp; - __u32 cpu = thread->cpu; if (likely(cmd == THREAD_NOTIFY_SWITCH)) { u32 fpexc = fmrx(FPEXC); #ifdef CONFIG_SMP + unsigned int cpu = thread->cpu; + /* * On SMP, if VFP is enabled, save the old state in * case the thread migrates to a different CPU. The @@ -74,25 +130,10 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) return NOTIFY_DONE; } - vfp = &thread->vfpstate; - if (cmd == THREAD_NOTIFY_FLUSH) { - /* - * Per-thread VFP initialisation. - */ - memset(vfp, 0, sizeof(union vfp_state)); - - vfp->hard.fpexc = FPEXC_EN; - vfp->hard.fpscr = FPSCR_ROUND_NEAREST; - - /* - * Disable VFP to ensure we initialise it first. - */ - fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); - } - - /* flush and release case: Per-thread VFP cleanup. */ - if (last_VFP_context[cpu] == vfp) - last_VFP_context[cpu] = NULL; + if (cmd == THREAD_NOTIFY_FLUSH) + vfp_thread_flush(thread); + else + vfp_thread_release(thread); return NOTIFY_DONE; } diff --git a/arch/avr32/include/asm/syscalls.h b/arch/avr32/include/asm/syscalls.h index 483d666c27c0..66a197266637 100644 --- a/arch/avr32/include/asm/syscalls.h +++ b/arch/avr32/include/asm/syscalls.h @@ -29,10 +29,6 @@ asmlinkage int sys_sigaltstack(const stack_t __user *, stack_t __user *, struct pt_regs *); asmlinkage int sys_rt_sigreturn(struct pt_regs *); -/* kernel/sys_avr32.c */ -asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, off_t); - /* mm/cache.c */ asmlinkage int sys_cacheflush(int, void __user *, size_t); diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c index 5d2daeaf356f..459349b5ed5a 100644 --- a/arch/avr32/kernel/sys_avr32.c +++ b/arch/avr32/kernel/sys_avr32.c @@ -5,39 +5,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/file.h> -#include <linux/mm.h> #include <linux/unistd.h> -#include <asm/mman.h> -#include <asm/uaccess.h> -#include <asm/syscalls.h> - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, off_t offset) -{ - int error = -EBADF; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - return error; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, offset); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - return error; -} - int kernel_execve(const char *file, char **argv, char **envp) { register long scno asm("r8") = __NR_execve; diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S index f7244cd02fbb..0447a3e2ba64 100644 --- a/arch/avr32/kernel/syscall-stubs.S +++ b/arch/avr32/kernel/syscall-stubs.S @@ -61,7 +61,7 @@ __sys_execve: __sys_mmap2: pushm lr st.w --sp, ARG6 - call sys_mmap2 + call sys_mmap_pgoff sub sp, -4 popm pc diff --git a/arch/blackfin/include/asm/fcntl.h b/arch/blackfin/include/asm/fcntl.h index 8727b2b382f1..251c911d59c1 100644 --- a/arch/blackfin/include/asm/fcntl.h +++ b/arch/blackfin/include/asm/fcntl.h @@ -7,8 +7,6 @@ #ifndef _BFIN_FCNTL_H #define _BFIN_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ #define O_DIRECTORY 040000 /* must be a directory */ #define O_NOFOLLOW 0100000 /* don't follow links */ #define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ diff --git a/arch/blackfin/kernel/sys_bfin.c b/arch/blackfin/kernel/sys_bfin.c index afcef129d4e8..2e7f8e10bf87 100644 --- a/arch/blackfin/kernel/sys_bfin.c +++ b/arch/blackfin/kernel/sys_bfin.c @@ -22,39 +22,6 @@ #include <asm/cacheflush.h> #include <asm/dma.h> -/* common code for old and new mmaps */ -static inline long -do_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - out: - return error; -} - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - return do_mmap2(addr, len, prot, flags, fd, pgoff); -} - asmlinkage void *sys_sram_alloc(size_t size, unsigned long flags) { return sram_alloc_with_lsl(size, flags); diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index a50637a8b9bd..f3f8bb46b517 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1422,7 +1422,7 @@ ENTRY(_sys_call_table) .long _sys_ni_syscall /* streams2 */ .long _sys_vfork /* 190 */ .long _sys_getrlimit - .long _sys_mmap2 + .long _sys_mmap_pgoff .long _sys_truncate64 .long _sys_ftruncate64 .long _sys_stat64 /* 195 */ diff --git a/arch/cris/kernel/sys_cris.c b/arch/cris/kernel/sys_cris.c index 2ad962c7e88e..c2bbb1ac98a9 100644 --- a/arch/cris/kernel/sys_cris.c +++ b/arch/cris/kernel/sys_cris.c @@ -26,31 +26,6 @@ #include <asm/uaccess.h> #include <asm/segment.h> -/* common code for old and new mmaps */ -static inline long -do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage unsigned long old_mmap(unsigned long __user *args) { unsigned long buffer[6]; @@ -63,7 +38,7 @@ asmlinkage unsigned long old_mmap(unsigned long __user *args) if (buffer[5] & ~PAGE_MASK) /* verify that offset is on page boundary */ goto out; - err = do_mmap2(buffer[0], buffer[1], buffer[2], buffer[3], + err = sys_mmap_pgoff(buffer[0], buffer[1], buffer[2], buffer[3], buffer[4], buffer[5] >> PAGE_SHIFT); out: return err; @@ -73,7 +48,8 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - return do_mmap2(addr, len, prot, flags, fd, pgoff); + /* bug(?): 8Kb pages here */ + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); } /* diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c index 2b6b5289cdcc..1d3d4c9e2521 100644 --- a/arch/frv/kernel/sys_frv.c +++ b/arch/frv/kernel/sys_frv.c @@ -31,9 +31,6 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - int error = -EBADF; - struct file * file = NULL; - /* As with sparc32, make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE we have.... */ @@ -41,69 +38,10 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, trying to map something we can't */ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1)) return -EINVAL; - pgoff >>= PAGE_SHIFT - 12; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - -#if 0 /* DAVIDM - do we want this */ -struct mmap_arg_struct64 { - __u32 addr; - __u32 len; - __u32 prot; - __u32 flags; - __u64 offset; /* 64 bits */ - __u32 fd; -}; - -asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg) -{ - int error = -EFAULT; - struct file * file = NULL; - struct mmap_arg_struct64 a; - unsigned long pgoff; - - if (copy_from_user(&a, arg, sizeof(a))) - return -EFAULT; - - if ((long)a.offset & ~PAGE_MASK) - return -EINVAL; - - pgoff = a.offset >> PAGE_SHIFT; - if ((a.offset >> PAGE_SHIFT) != pgoff) - return -EINVAL; - - if (!(a.flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(a.fd); - if (!file) - goto out; - } - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); -out: - return error; + return sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); } -#endif /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. diff --git a/arch/h8300/kernel/sys_h8300.c b/arch/h8300/kernel/sys_h8300.c index 8cb5d73a0e35..b5969db0ca10 100644 --- a/arch/h8300/kernel/sys_h8300.c +++ b/arch/h8300/kernel/sys_h8300.c @@ -26,39 +26,6 @@ #include <asm/traps.h> #include <asm/unistd.h> -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - return do_mmap2(addr, len, prot, flags, fd, pgoff); -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to @@ -87,57 +54,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct *arg) if (a.offset & ~PAGE_MASK) goto out; - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); -out: - return error; -} - -#if 0 /* DAVIDM - do we want this */ -struct mmap_arg_struct64 { - __u32 addr; - __u32 len; - __u32 prot; - __u32 flags; - __u64 offset; /* 64 bits */ - __u32 fd; -}; - -asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg) -{ - int error = -EFAULT; - struct file * file = NULL; - struct mmap_arg_struct64 a; - unsigned long pgoff; - - if (copy_from_user(&a, arg, sizeof(a))) - return -EFAULT; - - if ((long)a.offset & ~PAGE_MASK) - return -EINVAL; - - pgoff = a.offset >> PAGE_SHIFT; - if ((a.offset >> PAGE_SHIFT) != pgoff) - return -EINVAL; - - if (!(a.flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(a.fd); - if (!file) - goto out; - } - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); out: return error; } -#endif struct sel_arg_struct { unsigned long n; diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S index 4eb67faac633..2d69881eda6a 100644 --- a/arch/h8300/kernel/syscalls.S +++ b/arch/h8300/kernel/syscalls.S @@ -206,7 +206,7 @@ SYMBOL_NAME_LABEL(sys_call_table) .long SYMBOL_NAME(sys_ni_syscall) /* streams2 */ .long SYMBOL_NAME(sys_vfork) /* 190 */ .long SYMBOL_NAME(sys_getrlimit) - .long SYMBOL_NAME(sys_mmap2) + .long SYMBOL_NAME(sys_mmap_pgoff) .long SYMBOL_NAME(sys_truncate64) .long SYMBOL_NAME(sys_ftruncate64) .long SYMBOL_NAME(sys_stat64) /* 195 */ diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 1ee596cd942f..2d7f56a98e0f 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -87,9 +87,6 @@ config GENERIC_TIME_VSYSCALL bool default y -config HAVE_LEGACY_PER_CPU_AREA - def_bool y - config HAVE_SETUP_PER_CPU_AREA def_bool y diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index 429ec968c9ee..045b746b9808 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -858,6 +858,9 @@ ia32_do_mmap (struct file *file, unsigned long addr, unsigned long len, int prot prot = get_prot32(prot); + if (flags & MAP_HUGETLB) + return -ENOMEM; + #if PAGE_SHIFT > IA32_PAGE_SHIFT mutex_lock(&ia32_mmap_mutex); { diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h index 688a812c017d..61c7b1750b16 100644 --- a/arch/ia64/include/asm/meminit.h +++ b/arch/ia64/include/asm/meminit.h @@ -61,7 +61,7 @@ extern int register_active_ranges(u64 start, u64 len, int nid); #ifdef CONFIG_VIRTUAL_MEM_MAP # define LARGE_GAP 0x40000000 /* Use virtual mem map if hole is > than this */ - extern unsigned long vmalloc_end; + extern unsigned long VMALLOC_END; extern struct page *vmem_map; extern int find_largest_hole(u64 start, u64 end, void *arg); extern int create_mem_map_page_table(u64 start, u64 end, void *arg); diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h index 8840a690d1e7..69bf13857a9f 100644 --- a/arch/ia64/include/asm/pgtable.h +++ b/arch/ia64/include/asm/pgtable.h @@ -228,8 +228,7 @@ ia64_phys_addr_valid (unsigned long addr) #define VMALLOC_START (RGN_BASE(RGN_GATE) + 0x200000000UL) #ifdef CONFIG_VIRTUAL_MEM_MAP # define VMALLOC_END_INIT (RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9))) -# define VMALLOC_END vmalloc_end - extern unsigned long vmalloc_end; +extern unsigned long VMALLOC_END; #else #if defined(CONFIG_SPARSEMEM) && defined(CONFIG_SPARSEMEM_VMEMMAP) /* SPARSEMEM_VMEMMAP uses half of vmalloc... */ diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h index 3eaeedf1aef2..7fa90f73f6be 100644 --- a/arch/ia64/include/asm/processor.h +++ b/arch/ia64/include/asm/processor.h @@ -229,7 +229,7 @@ struct cpuinfo_ia64 { #endif }; -DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info); +DECLARE_PER_CPU(struct cpuinfo_ia64, ia64_cpu_info); /* * The "local" data variable. It refers to the per-CPU data of the currently executing @@ -237,8 +237,8 @@ DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info); * Do not use the address of local_cpu_data, since it will be different from * cpu_data(smp_processor_id())! */ -#define local_cpu_data (&__ia64_per_cpu_var(cpu_info)) -#define cpu_data(cpu) (&per_cpu(cpu_info, cpu)) +#define local_cpu_data (&__ia64_per_cpu_var(ia64_cpu_info)) +#define cpu_data(cpu) (&per_cpu(ia64_cpu_info, cpu)) extern void print_cpu_info (struct cpuinfo_ia64 *); diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h index 88afb54501e4..67455c2ed2b1 100644 --- a/arch/ia64/include/asm/xen/hypervisor.h +++ b/arch/ia64/include/asm/xen/hypervisor.h @@ -37,35 +37,9 @@ #include <xen/interface/xen.h> #include <xen/interface/version.h> /* to compile feature.c */ #include <xen/features.h> /* to comiple xen-netfront.c */ +#include <xen/xen.h> #include <asm/xen/hypercall.h> -/* xen_domain_type is set before executing any C code by early_xen_setup */ -enum xen_domain_type { - XEN_NATIVE, /* running on bare hardware */ - XEN_PV_DOMAIN, /* running in a PV domain */ - XEN_HVM_DOMAIN, /* running in a Xen hvm domain*/ -}; - -#ifdef CONFIG_XEN -extern enum xen_domain_type xen_domain_type; -#else -#define xen_domain_type XEN_NATIVE -#endif - -#define xen_domain() (xen_domain_type != XEN_NATIVE) -#define xen_pv_domain() (xen_domain() && \ - xen_domain_type == XEN_PV_DOMAIN) -#define xen_hvm_domain() (xen_domain() && \ - xen_domain_type == XEN_HVM_DOMAIN) - -#ifdef CONFIG_XEN_DOM0 -#define xen_initial_domain() (xen_pv_domain() && \ - (xen_start_info->flags & SIF_INITDOMAIN)) -#else -#define xen_initial_domain() (0) -#endif - - #ifdef CONFIG_XEN extern struct shared_info *HYPERVISOR_shared_info; extern struct start_info *xen_start_info; diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index baec6f00f7f3..40574ae11401 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -702,11 +702,23 @@ int __init early_acpi_boot_init(void) printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n"); +#ifdef CONFIG_SMP + if (available_cpus == 0) { + printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); + printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); + smp_boot_data.cpu_phys_id[available_cpus] = + hard_smp_processor_id(); + available_cpus = 1; /* We've got at least one of these, no? */ + } + smp_boot_data.cpu_count = available_cpus; +#endif + /* Make boot-up look pretty */ + printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, + total_cpus); + return 0; } - - int __init acpi_boot_init(void) { @@ -769,18 +781,8 @@ int __init acpi_boot_init(void) if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt)) printk(KERN_ERR PREFIX "Can't find FADT\n"); +#ifdef CONFIG_ACPI_NUMA #ifdef CONFIG_SMP - if (available_cpus == 0) { - printk(KERN_INFO "ACPI: Found 0 CPUS; assuming 1\n"); - printk(KERN_INFO "CPU 0 (0x%04x)", hard_smp_processor_id()); - smp_boot_data.cpu_phys_id[available_cpus] = - hard_smp_processor_id(); - available_cpus = 1; /* We've got at least one of these, no? */ - } - smp_boot_data.cpu_count = available_cpus; - - smp_build_cpu_map(); -# ifdef CONFIG_ACPI_NUMA if (srat_num_cpus == 0) { int cpu, i = 1; for (cpu = 0; cpu < smp_boot_data.cpu_count; cpu++) @@ -789,14 +791,9 @@ int __init acpi_boot_init(void) node_cpuid[i++].phys_id = smp_boot_data.cpu_phys_id[cpu]; } -# endif #endif -#ifdef CONFIG_ACPI_NUMA build_cpu_to_node_map(); #endif - /* Make boot-up look pretty */ - printk(KERN_INFO "%d CPUs available, %d CPUs total\n", available_cpus, - total_cpus); return 0; } diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 696eff28a0c4..17a9fba38930 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -1051,7 +1051,7 @@ END(ia64_delay_loop) * intermediate precision so that we can produce a full 64-bit result. */ GLOBAL_ENTRY(ia64_native_sched_clock) - addl r8=THIS_CPU(cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0 + addl r8=THIS_CPU(ia64_cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0 mov.m r9=ar.itc // fetch cycle-counter (35 cyc) ;; ldf8 f8=[r8] @@ -1077,7 +1077,7 @@ sched_clock = ia64_native_sched_clock #ifdef CONFIG_VIRT_CPU_ACCOUNTING GLOBAL_ENTRY(cycle_to_cputime) alloc r16=ar.pfs,1,0,0,0 - addl r8=THIS_CPU(cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0 + addl r8=THIS_CPU(ia64_cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0 ;; ldf8 f8=[r8] ;; diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c index 14d39e300627..461b99902bf6 100644 --- a/arch/ia64/kernel/ia64_ksyms.c +++ b/arch/ia64/kernel/ia64_ksyms.c @@ -30,7 +30,7 @@ EXPORT_SYMBOL(max_low_pfn); /* defined by bootmem.c, but not exported by generic #endif #include <asm/processor.h> -EXPORT_SYMBOL(per_cpu__cpu_info); +EXPORT_SYMBOL(per_cpu__ia64_cpu_info); #ifdef CONFIG_SMP EXPORT_SYMBOL(per_cpu__local_per_cpu_offset); #endif diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S index 7461d2573d41..d5bdf9de36b6 100644 --- a/arch/ia64/kernel/mca_asm.S +++ b/arch/ia64/kernel/mca_asm.S @@ -59,7 +59,7 @@ ia64_do_tlb_purge: #define O(member) IA64_CPUINFO_##member##_OFFSET - GET_THIS_PADDR(r2, cpu_info) // load phys addr of cpu_info into r2 + GET_THIS_PADDR(r2, ia64_cpu_info) // load phys addr of cpu_info into r2 ;; addl r17=O(PTCE_STRIDE),r2 addl r2=O(PTCE_BASE),r2 diff --git a/arch/ia64/kernel/relocate_kernel.S b/arch/ia64/kernel/relocate_kernel.S index 32f6fc131fbe..c370e02f0061 100644 --- a/arch/ia64/kernel/relocate_kernel.S +++ b/arch/ia64/kernel/relocate_kernel.S @@ -61,7 +61,7 @@ GLOBAL_ENTRY(relocate_new_kernel) // purge all TC entries #define O(member) IA64_CPUINFO_##member##_OFFSET - GET_THIS_PADDR(r2, cpu_info) // load phys addr of cpu_info into r2 + GET_THIS_PADDR(r2, ia64_cpu_info) // load phys addr of cpu_info into r2 ;; addl r17=O(PTCE_STRIDE),r2 addl r2=O(PTCE_BASE),r2 diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 1de86c96801d..a1ea87919777 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -74,7 +74,7 @@ unsigned long __per_cpu_offset[NR_CPUS]; EXPORT_SYMBOL(__per_cpu_offset); #endif -DEFINE_PER_CPU(struct cpuinfo_ia64, cpu_info); +DEFINE_PER_CPU(struct cpuinfo_ia64, ia64_cpu_info); DEFINE_PER_CPU(unsigned long, local_per_cpu_offset); unsigned long ia64_cycles_per_usec; struct ia64_boot_param *ia64_boot_param; @@ -566,19 +566,18 @@ setup_arch (char **cmdline_p) early_acpi_boot_init(); # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); -#ifdef CONFIG_ACPI_HOTPLUG_CPU +# ifdef CONFIG_ACPI_HOTPLUG_CPU prefill_possible_map(); -#endif +# endif per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ? 32 : cpus_weight(early_cpu_possible_map)), additional_cpus > 0 ? additional_cpus : 0); # endif -#else -# ifdef CONFIG_SMP - smp_build_cpu_map(); /* happens, e.g., with the Ski simulator */ -# endif #endif /* CONFIG_APCI_BOOT */ +#ifdef CONFIG_SMP + smp_build_cpu_map(); +#endif find_memory(); /* process SAL system table: */ @@ -856,18 +855,6 @@ identify_cpu (struct cpuinfo_ia64 *c) } /* - * In UP configuration, setup_per_cpu_areas() is defined in - * include/linux/percpu.h - */ -#ifdef CONFIG_SMP -void __init -setup_per_cpu_areas (void) -{ - /* start_kernel() requires this... */ -} -#endif - -/* * Do the following calculations: * * 1. the max. cache line size. @@ -980,7 +967,7 @@ cpu_init (void) * depends on the data returned by identify_cpu(). We break the dependency by * accessing cpu_data() through the canonical per-CPU address. */ - cpu_info = cpu_data + ((char *) &__ia64_per_cpu_var(cpu_info) - __per_cpu_start); + cpu_info = cpu_data + ((char *) &__ia64_per_cpu_var(ia64_cpu_info) - __per_cpu_start); identify_cpu(cpu_info); #ifdef CONFIG_MCKINLEY diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c index 92ed83f34036..609d50056a6c 100644 --- a/arch/ia64/kernel/sys_ia64.c +++ b/arch/ia64/kernel/sys_ia64.c @@ -100,51 +100,7 @@ sys_getpagesize (void) asmlinkage unsigned long ia64_brk (unsigned long brk) { - unsigned long rlim, retval, newbrk, oldbrk; - struct mm_struct *mm = current->mm; - - /* - * Most of this replicates the code in sys_brk() except for an additional safety - * check and the clearing of r8. However, we can't call sys_brk() because we need - * to acquire the mmap_sem before we can do the test... - */ - down_write(&mm->mmap_sem); - - if (brk < mm->end_code) - goto out; - newbrk = PAGE_ALIGN(brk); - oldbrk = PAGE_ALIGN(mm->brk); - if (oldbrk == newbrk) - goto set_brk; - - /* Always allow shrinking brk. */ - if (brk <= mm->brk) { - if (!do_munmap(mm, newbrk, oldbrk-newbrk)) - goto set_brk; - goto out; - } - - /* Check against unimplemented/unmapped addresses: */ - if ((newbrk - oldbrk) > RGN_MAP_LIMIT || REGION_OFFSET(newbrk) > RGN_MAP_LIMIT) - goto out; - - /* Check against rlimit.. */ - rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur; - if (rlim < RLIM_INFINITY && brk - mm->start_data > rlim) - goto out; - - /* Check against existing mmap mappings. */ - if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE)) - goto out; - - /* Ok, looks good - let it rip. */ - if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) - goto out; -set_brk: - mm->brk = brk; -out: - retval = mm->brk; - up_write(&mm->mmap_sem); + unsigned long retval = sys_brk(brk); force_successful_syscall_return(); return retval; } @@ -185,39 +141,6 @@ int ia64_mmap_check(unsigned long addr, unsigned long len, return 0; } -static inline unsigned long -do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, unsigned long pgoff) -{ - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - return -EBADF; - - if (!file->f_op || !file->f_op->mmap) { - addr = -ENODEV; - goto out; - } - } - - /* Careful about overflows.. */ - len = PAGE_ALIGN(len); - if (!len || len > TASK_SIZE) { - addr = -EINVAL; - goto out; - } - - down_write(¤t->mm->mmap_sem); - addr = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - -out: if (file) - fput(file); - return addr; -} - /* * mmap2() is like mmap() except that the offset is expressed in units * of PAGE_SIZE (instead of bytes). This allows to mmap2() (pieces @@ -226,7 +149,7 @@ out: if (file) asmlinkage unsigned long sys_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, long pgoff) { - addr = do_mmap2(addr, len, prot, flags, fd, pgoff); + addr = sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); if (!IS_ERR((void *) addr)) force_successful_syscall_return(); return addr; @@ -238,7 +161,7 @@ sys_mmap (unsigned long addr, unsigned long len, int prot, int flags, int fd, lo if (offset_in_page(off) != 0) return -EINVAL; - addr = do_mmap2(addr, len, prot, flags, fd, off >> PAGE_SHIFT); + addr = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); if (!IS_ERR((void *) addr)) force_successful_syscall_return(); return addr; diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 0a0c77b2c988..1295ba327f6f 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -166,6 +166,12 @@ SECTIONS } #endif +#ifdef CONFIG_SMP + . = ALIGN(PERCPU_PAGE_SIZE); + __cpu0_per_cpu = .; + . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ +#endif + . = ALIGN(PAGE_SIZE); __init_end = .; @@ -198,11 +204,6 @@ SECTIONS data : { } :data .data : AT(ADDR(.data) - LOAD_OFFSET) { -#ifdef CONFIG_SMP - . = ALIGN(PERCPU_PAGE_SIZE); - __cpu0_per_cpu = .; - . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ -#endif INIT_TASK_DATA(PAGE_SIZE) CACHELINE_ALIGNED_DATA(SMP_CACHE_BYTES) READ_MOSTLY_DATA(SMP_CACHE_BYTES) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 2f724d2bf299..54bf54059811 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -154,38 +154,99 @@ static void *cpu_data; void * __cpuinit per_cpu_init (void) { - int cpu; - static int first_time=1; + static bool first_time = true; + void *cpu0_data = __cpu0_per_cpu; + unsigned int cpu; + + if (!first_time) + goto skip; + first_time = false; /* - * get_free_pages() cannot be used before cpu_init() done. BSP - * allocates "NR_CPUS" pages for all CPUs to avoid that AP calls - * get_zeroed_page(). + * get_free_pages() cannot be used before cpu_init() done. + * BSP allocates PERCPU_PAGE_SIZE bytes for all possible CPUs + * to avoid that AP calls get_zeroed_page(). */ - if (first_time) { - void *cpu0_data = __cpu0_per_cpu; + for_each_possible_cpu(cpu) { + void *src = cpu == 0 ? cpu0_data : __phys_per_cpu_start; - first_time=0; + memcpy(cpu_data, src, __per_cpu_end - __per_cpu_start); + __per_cpu_offset[cpu] = (char *)cpu_data - __per_cpu_start; + per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; - __per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start; - per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0]; + /* + * percpu area for cpu0 is moved from the __init area + * which is setup by head.S and used till this point. + * Update ar.k3. This move is ensures that percpu + * area for cpu0 is on the correct node and its + * virtual address isn't insanely far from other + * percpu areas which is important for congruent + * percpu allocator. + */ + if (cpu == 0) + ia64_set_kr(IA64_KR_PER_CPU_DATA, __pa(cpu_data) - + (unsigned long)__per_cpu_start); - for (cpu = 1; cpu < NR_CPUS; cpu++) { - memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); - __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start; - cpu_data += PERCPU_PAGE_SIZE; - per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu]; - } + cpu_data += PERCPU_PAGE_SIZE; } +skip: return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; } static inline void alloc_per_cpu_data(void) { - cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1, + cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * num_possible_cpus(), PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); } + +/** + * setup_per_cpu_areas - setup percpu areas + * + * Arch code has already allocated and initialized percpu areas. All + * this function has to do is to teach the determined layout to the + * dynamic percpu allocator, which happens to be more complex than + * creating whole new ones using helpers. + */ +void __init +setup_per_cpu_areas(void) +{ + struct pcpu_alloc_info *ai; + struct pcpu_group_info *gi; + unsigned int cpu; + ssize_t static_size, reserved_size, dyn_size; + int rc; + + ai = pcpu_alloc_alloc_info(1, num_possible_cpus()); + if (!ai) + panic("failed to allocate pcpu_alloc_info"); + gi = &ai->groups[0]; + + /* units are assigned consecutively to possible cpus */ + for_each_possible_cpu(cpu) + gi->cpu_map[gi->nr_units++] = cpu; + + /* set parameters */ + static_size = __per_cpu_end - __per_cpu_start; + reserved_size = PERCPU_MODULE_RESERVE; + dyn_size = PERCPU_PAGE_SIZE - static_size - reserved_size; + if (dyn_size < 0) + panic("percpu area overflow static=%zd reserved=%zd\n", + static_size, reserved_size); + + ai->static_size = static_size; + ai->reserved_size = reserved_size; + ai->dyn_size = dyn_size; + ai->unit_size = PERCPU_PAGE_SIZE; + ai->atom_size = PAGE_SIZE; + ai->alloc_size = PERCPU_PAGE_SIZE; + + rc = pcpu_setup_first_chunk(ai, __per_cpu_start + __per_cpu_offset[0]); + if (rc) + panic("failed to setup percpu area (err=%d)", rc); + + pcpu_free_alloc_info(ai); +} #else #define alloc_per_cpu_data() do { } while (0) #endif /* CONFIG_SMP */ @@ -270,8 +331,8 @@ paging_init (void) map_size = PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * sizeof(struct page)); - vmalloc_end -= map_size; - vmem_map = (struct page *) vmalloc_end; + VMALLOC_END -= map_size; + vmem_map = (struct page *) VMALLOC_END; efi_memmap_walk(create_mem_map_page_table, NULL); /* diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index d85ba98d9008..19c4b2195dce 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -143,22 +143,120 @@ static void *per_cpu_node_setup(void *cpu_data, int node) int cpu; for_each_possible_early_cpu(cpu) { - if (cpu == 0) { - void *cpu0_data = __cpu0_per_cpu; - __per_cpu_offset[cpu] = (char*)cpu0_data - - __per_cpu_start; - } else if (node == node_cpuid[cpu].nid) { - memcpy(__va(cpu_data), __phys_per_cpu_start, - __per_cpu_end - __per_cpu_start); - __per_cpu_offset[cpu] = (char*)__va(cpu_data) - - __per_cpu_start; - cpu_data += PERCPU_PAGE_SIZE; - } + void *src = cpu == 0 ? __cpu0_per_cpu : __phys_per_cpu_start; + + if (node != node_cpuid[cpu].nid) + continue; + + memcpy(__va(cpu_data), src, __per_cpu_end - __per_cpu_start); + __per_cpu_offset[cpu] = (char *)__va(cpu_data) - + __per_cpu_start; + + /* + * percpu area for cpu0 is moved from the __init area + * which is setup by head.S and used till this point. + * Update ar.k3. This move is ensures that percpu + * area for cpu0 is on the correct node and its + * virtual address isn't insanely far from other + * percpu areas which is important for congruent + * percpu allocator. + */ + if (cpu == 0) + ia64_set_kr(IA64_KR_PER_CPU_DATA, + (unsigned long)cpu_data - + (unsigned long)__per_cpu_start); + + cpu_data += PERCPU_PAGE_SIZE; } #endif return cpu_data; } +#ifdef CONFIG_SMP +/** + * setup_per_cpu_areas - setup percpu areas + * + * Arch code has already allocated and initialized percpu areas. All + * this function has to do is to teach the determined layout to the + * dynamic percpu allocator, which happens to be more complex than + * creating whole new ones using helpers. + */ +void __init setup_per_cpu_areas(void) +{ + struct pcpu_alloc_info *ai; + struct pcpu_group_info *uninitialized_var(gi); + unsigned int *cpu_map; + void *base; + unsigned long base_offset; + unsigned int cpu; + ssize_t static_size, reserved_size, dyn_size; + int node, prev_node, unit, nr_units, rc; + + ai = pcpu_alloc_alloc_info(MAX_NUMNODES, nr_cpu_ids); + if (!ai) + panic("failed to allocate pcpu_alloc_info"); + cpu_map = ai->groups[0].cpu_map; + + /* determine base */ + base = (void *)ULONG_MAX; + for_each_possible_cpu(cpu) + base = min(base, + (void *)(__per_cpu_offset[cpu] + __per_cpu_start)); + base_offset = (void *)__per_cpu_start - base; + + /* build cpu_map, units are grouped by node */ + unit = 0; + for_each_node(node) + for_each_possible_cpu(cpu) + if (node == node_cpuid[cpu].nid) + cpu_map[unit++] = cpu; + nr_units = unit; + + /* set basic parameters */ + static_size = __per_cpu_end - __per_cpu_start; + reserved_size = PERCPU_MODULE_RESERVE; + dyn_size = PERCPU_PAGE_SIZE - static_size - reserved_size; + if (dyn_size < 0) + panic("percpu area overflow static=%zd reserved=%zd\n", + static_size, reserved_size); + + ai->static_size = static_size; + ai->reserved_size = reserved_size; + ai->dyn_size = dyn_size; + ai->unit_size = PERCPU_PAGE_SIZE; + ai->atom_size = PAGE_SIZE; + ai->alloc_size = PERCPU_PAGE_SIZE; + + /* + * CPUs are put into groups according to node. Walk cpu_map + * and create new groups at node boundaries. + */ + prev_node = -1; + ai->nr_groups = 0; + for (unit = 0; unit < nr_units; unit++) { + cpu = cpu_map[unit]; + node = node_cpuid[cpu].nid; + + if (node == prev_node) { + gi->nr_units++; + continue; + } + prev_node = node; + + gi = &ai->groups[ai->nr_groups++]; + gi->nr_units = 1; + gi->base_offset = __per_cpu_offset[cpu] + base_offset; + gi->cpu_map = &cpu_map[unit]; + } + + rc = pcpu_setup_first_chunk(ai, base); + if (rc) + panic("failed to setup percpu area (err=%d)", rc); + + pcpu_free_alloc_info(ai); +} +#endif + /** * fill_pernode - initialize pernode data. * @node: the node id. @@ -352,7 +450,8 @@ static void __init initialize_pernode_data(void) /* Set the node_data pointer for each per-cpu struct */ for_each_possible_early_cpu(cpu) { node = node_cpuid[cpu].nid; - per_cpu(cpu_info, cpu).node_data = mem_data[node].node_data; + per_cpu(ia64_cpu_info, cpu).node_data = + mem_data[node].node_data; } #else { @@ -360,7 +459,7 @@ static void __init initialize_pernode_data(void) cpu = 0; node = node_cpuid[cpu].nid; cpu0_cpu_info = (struct cpuinfo_ia64 *)(__phys_per_cpu_start + - ((char *)&per_cpu__cpu_info - __per_cpu_start)); + ((char *)&per_cpu__ia64_cpu_info - __per_cpu_start)); cpu0_cpu_info->node_data = mem_data[node].node_data; } #endif /* CONFIG_SMP */ @@ -666,9 +765,9 @@ void __init paging_init(void) sparse_init(); #ifdef CONFIG_VIRTUAL_MEM_MAP - vmalloc_end -= PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * + VMALLOC_END -= PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) * sizeof(struct page)); - vmem_map = (struct page *) vmalloc_end; + vmem_map = (struct page *) VMALLOC_END; efi_memmap_walk(create_mem_map_page_table, NULL); printk("Virtual mem_map starts at 0x%p\n", vmem_map); #endif diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index 1857766a63c1..b9609c69343a 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -44,8 +44,8 @@ extern void ia64_tlb_init (void); unsigned long MAX_DMA_ADDRESS = PAGE_OFFSET + 0x100000000UL; #ifdef CONFIG_VIRTUAL_MEM_MAP -unsigned long vmalloc_end = VMALLOC_END_INIT; -EXPORT_SYMBOL(vmalloc_end); +unsigned long VMALLOC_END = VMALLOC_END_INIT; +EXPORT_SYMBOL(VMALLOC_END); struct page *vmem_map; EXPORT_SYMBOL(vmem_map); #endif diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index c0fca2c1c858..df639db779f9 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -131,6 +131,7 @@ alloc_pci_controller (int seg) } struct pci_root_info { + struct acpi_device *bridge; struct pci_controller *controller; char *name; }; @@ -297,9 +298,20 @@ static __devinit acpi_status add_window(struct acpi_resource *res, void *data) window->offset = offset; if (insert_resource(root, &window->resource)) { - printk(KERN_ERR "alloc 0x%llx-0x%llx from %s for %s failed\n", - window->resource.start, window->resource.end, - root->name, info->name); + dev_err(&info->bridge->dev, + "can't allocate host bridge window %pR\n", + &window->resource); + } else { + if (offset) + dev_info(&info->bridge->dev, "host bridge window %pR " + "(PCI address [%#llx-%#llx])\n", + &window->resource, + window->resource.start - offset, + window->resource.end - offset); + else + dev_info(&info->bridge->dev, + "host bridge window %pR\n", + &window->resource); } return AE_OK; @@ -319,8 +331,9 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) (res->end - res->start < 16)) continue; if (j >= PCI_BUS_NUM_RESOURCES) { - printk("Ignoring range [%#llx-%#llx] (%lx)\n", - res->start, res->end, res->flags); + dev_warn(&bus->dev, + "ignoring host bridge window %pR (no space)\n", + res); continue; } bus->resource[j++] = res; @@ -364,6 +377,7 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) goto out3; sprintf(name, "PCI Bus %04x:%02x", domain, bus); + info.bridge = device; info.controller = controller; info.name = name; acpi_walk_resources(device->handle, METHOD_NAME__CRS, @@ -720,9 +734,6 @@ int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size) return ret; } -/* It's defined in drivers/pci/pci.c */ -extern u8 pci_cache_line_size; - /** * set_pci_cacheline_size - determine cacheline size for PCI devices * @@ -731,7 +742,7 @@ extern u8 pci_cache_line_size; * * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info(). */ -static void __init set_pci_cacheline_size(void) +static void __init set_pci_dfl_cacheline_size(void) { unsigned long levels, unique_caches; long status; @@ -751,7 +762,7 @@ static void __init set_pci_cacheline_size(void) "(status=%ld)\n", __func__, status); return; } - pci_cache_line_size = (1 << cci.pcci_line_size) / 4; + pci_dfl_cache_line_size = (1 << cci.pcci_line_size) / 4; } u64 ia64_dma_get_required_mask(struct device *dev) @@ -782,7 +793,7 @@ EXPORT_SYMBOL_GPL(dma_get_required_mask); static int __init pcibios_init(void) { - set_pci_cacheline_size(); + set_pci_dfl_cacheline_size(); return 0; } diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 1176506b2bae..e884ba4e031d 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -496,13 +496,13 @@ static int sn2_ptc_seq_show(struct seq_file *file, void *data) seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l, stat->change_rid, stat->shub_ptc_flushes, stat->nodes_flushed, stat->deadlocks, - 1000 * stat->lock_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec, - 1000 * stat->shub_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec, - 1000 * stat->shub_itc_clocks_max / per_cpu(cpu_info, cpu).cyc_per_usec, + 1000 * stat->lock_itc_clocks / per_cpu(ia64_cpu_info, cpu).cyc_per_usec, + 1000 * stat->shub_itc_clocks / per_cpu(ia64_cpu_info, cpu).cyc_per_usec, + 1000 * stat->shub_itc_clocks_max / per_cpu(ia64_cpu_info, cpu).cyc_per_usec, stat->shub_ptc_flushes_not_my_mm, stat->deadlocks2, stat->shub_ipi_flushes, - 1000 * stat->shub_ipi_flushes_itc_clocks / per_cpu(cpu_info, cpu).cyc_per_usec); + 1000 * stat->shub_ipi_flushes_itc_clocks / per_cpu(ia64_cpu_info, cpu).cyc_per_usec); } return 0; } diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c index f042e192d2fe..a3fb7cf9ae1d 100644 --- a/arch/ia64/xen/irq_xen.c +++ b/arch/ia64/xen/irq_xen.c @@ -63,19 +63,19 @@ xen_free_irq_vector(int vector) } -static DEFINE_PER_CPU(int, timer_irq) = -1; -static DEFINE_PER_CPU(int, ipi_irq) = -1; -static DEFINE_PER_CPU(int, resched_irq) = -1; -static DEFINE_PER_CPU(int, cmc_irq) = -1; -static DEFINE_PER_CPU(int, cmcp_irq) = -1; -static DEFINE_PER_CPU(int, cpep_irq) = -1; +static DEFINE_PER_CPU(int, xen_timer_irq) = -1; +static DEFINE_PER_CPU(int, xen_ipi_irq) = -1; +static DEFINE_PER_CPU(int, xen_resched_irq) = -1; +static DEFINE_PER_CPU(int, xen_cmc_irq) = -1; +static DEFINE_PER_CPU(int, xen_cmcp_irq) = -1; +static DEFINE_PER_CPU(int, xen_cpep_irq) = -1; #define NAME_SIZE 15 -static DEFINE_PER_CPU(char[NAME_SIZE], timer_name); -static DEFINE_PER_CPU(char[NAME_SIZE], ipi_name); -static DEFINE_PER_CPU(char[NAME_SIZE], resched_name); -static DEFINE_PER_CPU(char[NAME_SIZE], cmc_name); -static DEFINE_PER_CPU(char[NAME_SIZE], cmcp_name); -static DEFINE_PER_CPU(char[NAME_SIZE], cpep_name); +static DEFINE_PER_CPU(char[NAME_SIZE], xen_timer_name); +static DEFINE_PER_CPU(char[NAME_SIZE], xen_ipi_name); +static DEFINE_PER_CPU(char[NAME_SIZE], xen_resched_name); +static DEFINE_PER_CPU(char[NAME_SIZE], xen_cmc_name); +static DEFINE_PER_CPU(char[NAME_SIZE], xen_cmcp_name); +static DEFINE_PER_CPU(char[NAME_SIZE], xen_cpep_name); #undef NAME_SIZE struct saved_irq { @@ -144,64 +144,64 @@ __xen_register_percpu_irq(unsigned int cpu, unsigned int vec, if (xen_slab_ready) { switch (vec) { case IA64_TIMER_VECTOR: - snprintf(per_cpu(timer_name, cpu), - sizeof(per_cpu(timer_name, cpu)), + snprintf(per_cpu(xen_timer_name, cpu), + sizeof(per_cpu(xen_timer_name, cpu)), "%s%d", action->name, cpu); irq = bind_virq_to_irqhandler(VIRQ_ITC, cpu, action->handler, action->flags, - per_cpu(timer_name, cpu), action->dev_id); - per_cpu(timer_irq, cpu) = irq; + per_cpu(xen_timer_name, cpu), action->dev_id); + per_cpu(xen_timer_irq, cpu) = irq; break; case IA64_IPI_RESCHEDULE: - snprintf(per_cpu(resched_name, cpu), - sizeof(per_cpu(resched_name, cpu)), + snprintf(per_cpu(xen_resched_name, cpu), + sizeof(per_cpu(xen_resched_name, cpu)), "%s%d", action->name, cpu); irq = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR, cpu, action->handler, action->flags, - per_cpu(resched_name, cpu), action->dev_id); - per_cpu(resched_irq, cpu) = irq; + per_cpu(xen_resched_name, cpu), action->dev_id); + per_cpu(xen_resched_irq, cpu) = irq; break; case IA64_IPI_VECTOR: - snprintf(per_cpu(ipi_name, cpu), - sizeof(per_cpu(ipi_name, cpu)), + snprintf(per_cpu(xen_ipi_name, cpu), + sizeof(per_cpu(xen_ipi_name, cpu)), "%s%d", action->name, cpu); irq = bind_ipi_to_irqhandler(XEN_IPI_VECTOR, cpu, action->handler, action->flags, - per_cpu(ipi_name, cpu), action->dev_id); - per_cpu(ipi_irq, cpu) = irq; + per_cpu(xen_ipi_name, cpu), action->dev_id); + per_cpu(xen_ipi_irq, cpu) = irq; break; case IA64_CMC_VECTOR: - snprintf(per_cpu(cmc_name, cpu), - sizeof(per_cpu(cmc_name, cpu)), + snprintf(per_cpu(xen_cmc_name, cpu), + sizeof(per_cpu(xen_cmc_name, cpu)), "%s%d", action->name, cpu); irq = bind_virq_to_irqhandler(VIRQ_MCA_CMC, cpu, - action->handler, - action->flags, - per_cpu(cmc_name, cpu), - action->dev_id); - per_cpu(cmc_irq, cpu) = irq; + action->handler, + action->flags, + per_cpu(xen_cmc_name, cpu), + action->dev_id); + per_cpu(xen_cmc_irq, cpu) = irq; break; case IA64_CMCP_VECTOR: - snprintf(per_cpu(cmcp_name, cpu), - sizeof(per_cpu(cmcp_name, cpu)), + snprintf(per_cpu(xen_cmcp_name, cpu), + sizeof(per_cpu(xen_cmcp_name, cpu)), "%s%d", action->name, cpu); irq = bind_ipi_to_irqhandler(XEN_CMCP_VECTOR, cpu, - action->handler, - action->flags, - per_cpu(cmcp_name, cpu), - action->dev_id); - per_cpu(cmcp_irq, cpu) = irq; + action->handler, + action->flags, + per_cpu(xen_cmcp_name, cpu), + action->dev_id); + per_cpu(xen_cmcp_irq, cpu) = irq; break; case IA64_CPEP_VECTOR: - snprintf(per_cpu(cpep_name, cpu), - sizeof(per_cpu(cpep_name, cpu)), + snprintf(per_cpu(xen_cpep_name, cpu), + sizeof(per_cpu(xen_cpep_name, cpu)), "%s%d", action->name, cpu); irq = bind_ipi_to_irqhandler(XEN_CPEP_VECTOR, cpu, - action->handler, - action->flags, - per_cpu(cpep_name, cpu), - action->dev_id); - per_cpu(cpep_irq, cpu) = irq; + action->handler, + action->flags, + per_cpu(xen_cpep_name, cpu), + action->dev_id); + per_cpu(xen_cpep_irq, cpu) = irq; break; case IA64_CPE_VECTOR: case IA64_MCA_RENDEZ_VECTOR: @@ -275,30 +275,33 @@ unbind_evtchn_callback(struct notifier_block *nfb, if (action == CPU_DEAD) { /* Unregister evtchn. */ - if (per_cpu(cpep_irq, cpu) >= 0) { - unbind_from_irqhandler(per_cpu(cpep_irq, cpu), NULL); - per_cpu(cpep_irq, cpu) = -1; + if (per_cpu(xen_cpep_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(xen_cpep_irq, cpu), + NULL); + per_cpu(xen_cpep_irq, cpu) = -1; } - if (per_cpu(cmcp_irq, cpu) >= 0) { - unbind_from_irqhandler(per_cpu(cmcp_irq, cpu), NULL); - per_cpu(cmcp_irq, cpu) = -1; + if (per_cpu(xen_cmcp_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(xen_cmcp_irq, cpu), + NULL); + per_cpu(xen_cmcp_irq, cpu) = -1; } - if (per_cpu(cmc_irq, cpu) >= 0) { - unbind_from_irqhandler(per_cpu(cmc_irq, cpu), NULL); - per_cpu(cmc_irq, cpu) = -1; + if (per_cpu(xen_cmc_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(xen_cmc_irq, cpu), NULL); + per_cpu(xen_cmc_irq, cpu) = -1; } - if (per_cpu(ipi_irq, cpu) >= 0) { - unbind_from_irqhandler(per_cpu(ipi_irq, cpu), NULL); - per_cpu(ipi_irq, cpu) = -1; + if (per_cpu(xen_ipi_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(xen_ipi_irq, cpu), NULL); + per_cpu(xen_ipi_irq, cpu) = -1; } - if (per_cpu(resched_irq, cpu) >= 0) { - unbind_from_irqhandler(per_cpu(resched_irq, cpu), - NULL); - per_cpu(resched_irq, cpu) = -1; + if (per_cpu(xen_resched_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(xen_resched_irq, cpu), + NULL); + per_cpu(xen_resched_irq, cpu) = -1; } - if (per_cpu(timer_irq, cpu) >= 0) { - unbind_from_irqhandler(per_cpu(timer_irq, cpu), NULL); - per_cpu(timer_irq, cpu) = -1; + if (per_cpu(xen_timer_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(xen_timer_irq, cpu), + NULL); + per_cpu(xen_timer_irq, cpu) = -1; } } return NOTIFY_OK; diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c index dbeadb9c8e20..c1c544513e8d 100644 --- a/arch/ia64/xen/time.c +++ b/arch/ia64/xen/time.c @@ -34,15 +34,15 @@ #include "../kernel/fsyscall_gtod_data.h" -DEFINE_PER_CPU(struct vcpu_runstate_info, runstate); -DEFINE_PER_CPU(unsigned long, processed_stolen_time); -DEFINE_PER_CPU(unsigned long, processed_blocked_time); +static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate); +static DEFINE_PER_CPU(unsigned long, xen_stolen_time); +static DEFINE_PER_CPU(unsigned long, xen_blocked_time); /* taken from i386/kernel/time-xen.c */ static void xen_init_missing_ticks_accounting(int cpu) { struct vcpu_register_runstate_memory_area area; - struct vcpu_runstate_info *runstate = &per_cpu(runstate, cpu); + struct vcpu_runstate_info *runstate = &per_cpu(xen_runstate, cpu); int rc; memset(runstate, 0, sizeof(*runstate)); @@ -52,8 +52,8 @@ static void xen_init_missing_ticks_accounting(int cpu) &area); WARN_ON(rc && rc != -ENOSYS); - per_cpu(processed_blocked_time, cpu) = runstate->time[RUNSTATE_blocked]; - per_cpu(processed_stolen_time, cpu) = runstate->time[RUNSTATE_runnable] + per_cpu(xen_blocked_time, cpu) = runstate->time[RUNSTATE_blocked]; + per_cpu(xen_stolen_time, cpu) = runstate->time[RUNSTATE_runnable] + runstate->time[RUNSTATE_offline]; } @@ -68,7 +68,7 @@ static void get_runstate_snapshot(struct vcpu_runstate_info *res) BUG_ON(preemptible()); - state = &__get_cpu_var(runstate); + state = &__get_cpu_var(xen_runstate); /* * The runstate info is always updated by the hypervisor on @@ -103,12 +103,12 @@ consider_steal_time(unsigned long new_itm) * This function just checks and reject this effect. */ if (!time_after_eq(runstate.time[RUNSTATE_blocked], - per_cpu(processed_blocked_time, cpu))) + per_cpu(xen_blocked_time, cpu))) blocked = 0; if (!time_after_eq(runstate.time[RUNSTATE_runnable] + runstate.time[RUNSTATE_offline], - per_cpu(processed_stolen_time, cpu))) + per_cpu(xen_stolen_time, cpu))) stolen = 0; if (!time_after(delta_itm + new_itm, ia64_get_itc())) @@ -147,8 +147,8 @@ consider_steal_time(unsigned long new_itm) } else { local_cpu_data->itm_next = delta_itm + new_itm; } - per_cpu(processed_stolen_time, cpu) += NS_PER_TICK * stolen; - per_cpu(processed_blocked_time, cpu) += NS_PER_TICK * blocked; + per_cpu(xen_stolen_time, cpu) += NS_PER_TICK * stolen; + per_cpu(xen_blocked_time, cpu) += NS_PER_TICK * blocked; } return delta_itm; } diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c index 305ac852bbed..d3c865c5a6ba 100644 --- a/arch/m32r/kernel/sys_m32r.c +++ b/arch/m32r/kernel/sys_m32r.c @@ -76,30 +76,6 @@ asmlinkage int sys_tas(int __user *addr) return oldval; } -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - /* * sys_ipc() is the de-multiplexer for the SysV IPC calls.. * diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S index aa3bf4cfab37..60536e271233 100644 --- a/arch/m32r/kernel/syscall_table.S +++ b/arch/m32r/kernel/syscall_table.S @@ -191,7 +191,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap_pgoff .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h index fe60e1abaee8..aca0e28581c7 100644 --- a/arch/m68k/include/asm/pgtable_mm.h +++ b/arch/m68k/include/asm/pgtable_mm.h @@ -83,9 +83,9 @@ #define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) #define VMALLOC_END KMAP_START #else -extern unsigned long vmalloc_end; +extern unsigned long m68k_vmalloc_end; #define VMALLOC_START 0x0f800000 -#define VMALLOC_END vmalloc_end +#define VMALLOC_END m68k_vmalloc_end #endif /* CONFIG_SUN3 */ /* zero page used for uninitialized stuff */ diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 7deb402bfc75..218f441de667 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -29,37 +29,16 @@ #include <asm/page.h> #include <asm/unistd.h> -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - return do_mmap2(addr, len, prot, flags, fd, pgoff); + /* + * This is wrong for sun3 - there PAGE_SIZE is 8Kb, + * so we need to shift the argument down by 1; m68k mmap64(3) + * (in libc) expects the last argument of mmap2 in 4Kb units. + */ + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); } /* @@ -90,57 +69,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) goto out; - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); -out: - return error; -} - -#if 0 -struct mmap_arg_struct64 { - __u32 addr; - __u32 len; - __u32 prot; - __u32 flags; - __u64 offset; /* 64 bits */ - __u32 fd; -}; - -asmlinkage long sys_mmap64(struct mmap_arg_struct64 *arg) -{ - int error = -EFAULT; - struct file * file = NULL; - struct mmap_arg_struct64 a; - unsigned long pgoff; - - if (copy_from_user(&a, arg, sizeof(a))) - return -EFAULT; - - if ((long)a.offset & ~PAGE_MASK) - return -EINVAL; - - pgoff = a.offset >> PAGE_SHIFT; - if ((a.offset >> PAGE_SHIFT) != pgoff) - return -EINVAL; - - if (!(a.flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(a.fd); - if (!file) - goto out; - } - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); out: return error; } -#endif struct sel_arg_struct { unsigned long n; diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c index 3cd19390aae5..94f81ecfe3f8 100644 --- a/arch/m68k/sun3/mmu_emu.c +++ b/arch/m68k/sun3/mmu_emu.c @@ -45,8 +45,8 @@ ** Globals */ -unsigned long vmalloc_end; -EXPORT_SYMBOL(vmalloc_end); +unsigned long m68k_vmalloc_end; +EXPORT_SYMBOL(m68k_vmalloc_end); unsigned long pmeg_vaddr[PMEGS_NUM]; unsigned char pmeg_alloc[PMEGS_NUM]; @@ -172,8 +172,8 @@ void mmu_emu_init(unsigned long bootmem_end) #endif // the lowest mapping here is the end of our // vmalloc region - if(!vmalloc_end) - vmalloc_end = seg; + if (!m68k_vmalloc_end) + m68k_vmalloc_end = seg; // mark the segmap alloc'd, and reserve any // of the first 0xbff pages the hardware is diff --git a/arch/m68knommu/kernel/sys_m68k.c b/arch/m68knommu/kernel/sys_m68k.c index efdd090778a3..b67cbc735a9b 100644 --- a/arch/m68knommu/kernel/sys_m68k.c +++ b/arch/m68knommu/kernel/sys_m68k.c @@ -27,39 +27,6 @@ #include <asm/cacheflush.h> #include <asm/unistd.h> -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - return do_mmap2(addr, len, prot, flags, fd, pgoff); -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux/m68k cloned Linux/i386, which didn't use to be able to @@ -88,9 +55,8 @@ asmlinkage int old_mmap(struct mmap_arg_struct *arg) if (a.offset & ~PAGE_MASK) goto out; - a.flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); out: return error; } diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index 23535cc415ae..486837efa3d7 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -210,7 +210,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap_pgoff .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index bbd8327f1890..fd53e500be67 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -6,8 +6,15 @@ mainmenu "Linux/Microblaze Kernel Configuration" config MICROBLAZE def_bool y select HAVE_LMB + select HAVE_FUNCTION_TRACER + select HAVE_FUNCTION_TRACE_MCOUNT_TEST + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD select USB_ARCH_HAS_EHCI select ARCH_WANT_OPTIONAL_GPIOLIB + select HAVE_OPROFILE + select TRACING_SUPPORT config SWAP def_bool n @@ -57,12 +64,24 @@ config GENERIC_GPIO config GENERIC_CSUM def_bool y +config STACKTRACE_SUPPORT + def_bool y + +config LOCKDEP_SUPPORT + def_bool y + +config HAVE_LATENCYTOP_SUPPORT + def_bool y + config PCI def_bool n config NO_DMA def_bool y +config DTC + def_bool y + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug index 242cd35bdb4b..9dc708a7f700 100644 --- a/arch/microblaze/Kconfig.debug +++ b/arch/microblaze/Kconfig.debug @@ -3,6 +3,9 @@ menu "Kernel hacking" +config TRACE_IRQFLAGS_SUPPORT + def_bool y + source "lib/Kconfig.debug" config EARLY_PRINTK diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 34187354304a..d2d6cfcb1a30 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -51,6 +51,8 @@ core-y += arch/microblaze/kernel/ core-y += arch/microblaze/mm/ core-y += arch/microblaze/platform/ +drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/ + boot := arch/microblaze/boot # Are we making a simpleImage.<boardname> target? If so, crack out the boardname diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index 21f13322a4ca..902cf9846c3c 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -2,11 +2,13 @@ # arch/microblaze/boot/Makefile # +MKIMAGE := $(srctree)/scripts/mkuboot.sh + obj-y += linked_dtb.o targets := linux.bin linux.bin.gz simpleImage.% -OBJCOPYFLAGS_linux.bin := -O binary +OBJCOPYFLAGS := -O binary # Where the DTS files live dtstree := $(srctree)/$(src)/dts @@ -24,6 +26,7 @@ $(obj)/linux.bin: vmlinux FORCE [ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \ touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image" $(call if_changed,objcopy) + $(call if_changed,uimage) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE @@ -36,8 +39,16 @@ quiet_cmd_cp = CP $< $@$2 quiet_cmd_strip = STRIP $@ cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@ +quiet_cmd_uimage = UIMAGE $@.ub + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A microblaze -O linux -T kernel \ + -C none -n 'Linux-$(KERNELRELEASE)' \ + -a $(CONFIG_KERNEL_BASE_ADDR) -e $(CONFIG_KERNEL_BASE_ADDR) \ + -d $@ $@.ub + $(obj)/simpleImage.%: vmlinux FORCE $(call if_changed,cp,.unstrip) + $(call if_changed,objcopy) + $(call if_changed,uimage) $(call if_changed,strip) @echo 'Kernel: $@ is ready' ' (#'`cat .version`')' @@ -53,4 +64,4 @@ $(obj)/%.dtb: $(dtstree)/%.dts FORCE clean-kernel += linux.bin linux.bin.gz simpleImage.* -clean-files += *.dtb +clean-files += *.dtb simpleImage.*.unstrip diff --git a/arch/microblaze/include/asm/cache.h b/arch/microblaze/include/asm/cache.h index c209c47509d5..e52210891d78 100644 --- a/arch/microblaze/include/asm/cache.h +++ b/arch/microblaze/include/asm/cache.h @@ -21,20 +21,4 @@ #define SMP_CACHE_BYTES L1_CACHE_BYTES -void _enable_icache(void); -void _disable_icache(void); -void _invalidate_icache(unsigned int addr); - -#define __enable_icache() _enable_icache() -#define __disable_icache() _disable_icache() -#define __invalidate_icache(addr) _invalidate_icache(addr) - -void _enable_dcache(void); -void _disable_dcache(void); -void _invalidate_dcache(unsigned int addr); - -#define __enable_dcache() _enable_dcache() -#define __disable_dcache() _disable_dcache() -#define __invalidate_dcache(addr) _invalidate_dcache(addr) - #endif /* _ASM_MICROBLAZE_CACHE_H */ diff --git a/arch/microblaze/include/asm/cacheflush.h b/arch/microblaze/include/asm/cacheflush.h index 088076e657b3..a6edd356cd08 100644 --- a/arch/microblaze/include/asm/cacheflush.h +++ b/arch/microblaze/include/asm/cacheflush.h @@ -18,6 +18,8 @@ /* Somebody depends on this; sigh... */ #include <linux/mm.h> +/* Look at Documentation/cachetlb.txt */ + /* * Cache handling functions. * Microblaze has a write-through data cache, meaning that the data cache @@ -27,78 +29,81 @@ * instruction cache to make sure we don't fetch old, bad code. */ +/* struct cache, d=dcache, i=icache, fl = flush, iv = invalidate, + * suffix r = range */ +struct scache { + /* icache */ + void (*ie)(void); /* enable */ + void (*id)(void); /* disable */ + void (*ifl)(void); /* flush */ + void (*iflr)(unsigned long a, unsigned long b); + void (*iin)(void); /* invalidate */ + void (*iinr)(unsigned long a, unsigned long b); + /* dcache */ + void (*de)(void); /* enable */ + void (*dd)(void); /* disable */ + void (*dfl)(void); /* flush */ + void (*dflr)(unsigned long a, unsigned long b); + void (*din)(void); /* invalidate */ + void (*dinr)(unsigned long a, unsigned long b); +}; + +/* microblaze cache */ +extern struct scache *mbc; + +void microblaze_cache_init(void); + +#define enable_icache() mbc->ie(); +#define disable_icache() mbc->id(); +#define flush_icache() mbc->ifl(); +#define flush_icache_range(start, end) mbc->iflr(start, end); +#define invalidate_icache() mbc->iin(); +#define invalidate_icache_range(start, end) mbc->iinr(start, end); + + +#define flush_icache_user_range(vma, pg, adr, len) flush_icache(); +#define flush_icache_page(vma, pg) do { } while (0) + +#define enable_dcache() mbc->de(); +#define disable_dcache() mbc->dd(); /* FIXME for LL-temac driver */ -#define invalidate_dcache_range(start, end) \ - __invalidate_dcache_range(start, end) - -#define flush_cache_all() __invalidate_cache_all() -#define flush_cache_mm(mm) do { } while (0) -#define flush_cache_range(vma, start, end) __invalidate_cache_all() -#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define invalidate_dcache() mbc->din(); +#define invalidate_dcache_range(start, end) mbc->dinr(start, end); +#define flush_dcache() mbc->dfl(); +#define flush_dcache_range(start, end) mbc->dflr(start, end); -#define flush_dcache_range(start, end) __invalidate_dcache_range(start, end) #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0 +/* D-cache aliasing problem can't happen - cache is between MMU and ram */ #define flush_dcache_page(page) do { } while (0) #define flush_dcache_mmap_lock(mapping) do { } while (0) #define flush_dcache_mmap_unlock(mapping) do { } while (0) -#define flush_icache_range(start, len) __invalidate_icache_range(start, len) -#define flush_icache_page(vma, pg) do { } while (0) - -#ifndef CONFIG_MMU -# define flush_icache_user_range(start, len) do { } while (0) -#else -# define flush_icache_user_range(vma, pg, adr, len) __invalidate_icache_all() - -# define flush_page_to_ram(page) do { } while (0) -# define flush_icache() __invalidate_icache_all() -# define flush_cache_sigtramp(vaddr) \ - __invalidate_icache_range(vaddr, vaddr + 8) - -# define flush_dcache_mmap_lock(mapping) do { } while (0) -# define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) -# define flush_cache_dup_mm(mm) do { } while (0) +/* MS: kgdb code use this macro, wrong len with FLASH */ +#if 0 +#define flush_cache_range(vma, start, len) { \ + flush_icache_range((unsigned) (start), (unsigned) (start) + (len)); \ + flush_dcache_range((unsigned) (start), (unsigned) (start) + (len)); \ +} #endif -#define flush_cache_vmap(start, end) do { } while (0) -#define flush_cache_vunmap(start, end) do { } while (0) - -struct page; -struct mm_struct; -struct vm_area_struct; - -/* see arch/microblaze/kernel/cache.c */ -extern void __invalidate_icache_all(void); -extern void __invalidate_icache_range(unsigned long start, unsigned long end); -extern void __invalidate_icache_page(struct vm_area_struct *vma, - struct page *page); -extern void __invalidate_icache_user_range(struct vm_area_struct *vma, - struct page *page, - unsigned long adr, int len); -extern void __invalidate_cache_sigtramp(unsigned long addr); - -extern void __invalidate_dcache_all(void); -extern void __invalidate_dcache_range(unsigned long start, unsigned long end); -extern void __invalidate_dcache_page(struct vm_area_struct *vma, - struct page *page); -extern void __invalidate_dcache_user_range(struct vm_area_struct *vma, - struct page *page, - unsigned long adr, int len); - -extern inline void __invalidate_cache_all(void) -{ - __invalidate_icache_all(); - __invalidate_dcache_all(); -} +#define flush_cache_range(vma, start, len) do { } while (0) -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { memcpy((dst), (src), (len)); \ - flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \ +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ +do { \ + memcpy((dst), (src), (len)); \ + flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \ } while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy((dst), (src), (len)) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ +do { \ + memcpy((dst), (src), (len)); \ +} while (0) #endif /* _ASM_MICROBLAZE_CACHEFLUSH_H */ diff --git a/arch/microblaze/include/asm/cpuinfo.h b/arch/microblaze/include/asm/cpuinfo.h index 52f28f6dc4eb..b4f5ca33aebf 100644 --- a/arch/microblaze/include/asm/cpuinfo.h +++ b/arch/microblaze/include/asm/cpuinfo.h @@ -43,7 +43,7 @@ struct cpuinfo { u32 use_icache; u32 icache_tagbits; u32 icache_write; - u32 icache_line; + u32 icache_line_length; u32 icache_size; unsigned long icache_base; unsigned long icache_high; @@ -51,8 +51,9 @@ struct cpuinfo { u32 use_dcache; u32 dcache_tagbits; u32 dcache_write; - u32 dcache_line; + u32 dcache_line_length; u32 dcache_size; + u32 dcache_wb; unsigned long dcache_base; unsigned long dcache_high; diff --git a/arch/microblaze/include/asm/device.h b/arch/microblaze/include/asm/device.h index 30286db27c1c..78a038452c0f 100644 --- a/arch/microblaze/include/asm/device.h +++ b/arch/microblaze/include/asm/device.h @@ -19,6 +19,18 @@ struct dev_archdata { struct pdev_archdata { }; +static inline void dev_archdata_set_node(struct dev_archdata *ad, + struct device_node *np) +{ + ad->of_node = np; +} + +static inline struct device_node * +dev_archdata_get_node(const struct dev_archdata *ad) +{ + return ad->of_node; +} + #endif /* _ASM_MICROBLAZE_DEVICE_H */ diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h index 8b137891791f..fd2fa2eca62f 100644 --- a/arch/microblaze/include/asm/ftrace.h +++ b/arch/microblaze/include/asm/ftrace.h @@ -1 +1,26 @@ +#ifndef _ASM_MICROBLAZE_FTRACE +#define _ASM_MICROBLAZE_FTRACE +#ifdef CONFIG_FUNCTION_TRACER + +#define MCOUNT_ADDR ((long)(_mcount)) +#define MCOUNT_INSN_SIZE 8 /* sizeof mcount call */ + +#ifndef __ASSEMBLY__ +extern void _mcount(void); +extern void ftrace_call_graph(void); +#endif + +#ifdef CONFIG_DYNAMIC_FTRACE +/* reloction of mcount call site is the same as the address */ +static inline unsigned long ftrace_call_adjust(unsigned long addr) +{ + return addr; +} + +struct dyn_arch_ftrace { +}; +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#endif /* CONFIG_FUNCTION_TRACER */ +#endif /* _ASM_MICROBLAZE_FTRACE */ diff --git a/arch/microblaze/include/asm/futex.h b/arch/microblaze/include/asm/futex.h index 0b745828f42b..8dbb6e7a03a2 100644 --- a/arch/microblaze/include/asm/futex.h +++ b/arch/microblaze/include/asm/futex.h @@ -1 +1,126 @@ -#include <asm-generic/futex.h> +#ifndef _ASM_MICROBLAZE_FUTEX_H +#define _ASM_MICROBLAZE_FUTEX_H + +#ifdef __KERNEL__ + +#include <linux/futex.h> +#include <linux/uaccess.h> +#include <asm/errno.h> + +#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +({ \ + __asm__ __volatile__ ( \ + "1: lwx %0, %2, r0; " \ + insn \ + "2: swx %1, %2, r0; \ + addic %1, r0, 0; \ + bnei %1, 1b; \ + 3: \ + .section .fixup,\"ax\"; \ + 4: brid 3b; \ + addik %1, r0, %3; \ + .previous; \ + .section __ex_table,\"a\"; \ + .word 1b,4b,2b,4b; \ + .previous;" \ + : "=&r" (oldval), "=&r" (ret) \ + : "b" (uaddr), "i" (-EFAULT), "r" (oparg) \ + ); \ +}) + +static inline int +futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + __futex_atomic_op("or %1,%4,%4;", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ADD: + __futex_atomic_op("add %1,%0,%4;", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_OR: + __futex_atomic_op("or %1,%0,%4;", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_ANDN: + __futex_atomic_op("and %1,%0,%4;", ret, oldval, uaddr, oparg); + break; + case FUTEX_OP_XOR: + __futex_atomic_op("xor %1,%0,%4;", ret, oldval, uaddr, oparg); + break; + default: + ret = -ENOSYS; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: + ret = (oldval == cmparg); + break; + case FUTEX_OP_CMP_NE: + ret = (oldval != cmparg); + break; + case FUTEX_OP_CMP_LT: + ret = (oldval < cmparg); + break; + case FUTEX_OP_CMP_GE: + ret = (oldval >= cmparg); + break; + case FUTEX_OP_CMP_LE: + ret = (oldval <= cmparg); + break; + case FUTEX_OP_CMP_GT: + ret = (oldval > cmparg); + break; + default: + ret = -ENOSYS; + } + } + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + int prev, cmp; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + __asm__ __volatile__ ("1: lwx %0, %2, r0; \ + cmp %1, %0, %3; \ + beqi %1, 3f; \ + 2: swx %4, %2, r0; \ + addic %1, r0, 0; \ + bnei %1, 1b; \ + 3: \ + .section .fixup,\"ax\"; \ + 4: brid 3b; \ + addik %0, r0, %5; \ + .previous; \ + .section __ex_table,\"a\"; \ + .word 1b,4b,2b,4b; \ + .previous;" \ + : "=&r" (prev), "=&r"(cmp) \ + : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)); + + return prev; +} + +#endif /* __KERNEL__ */ + +#endif diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h index dea65645a4f8..2c38c6d80176 100644 --- a/arch/microblaze/include/asm/irqflags.h +++ b/arch/microblaze/include/asm/irqflags.h @@ -10,78 +10,73 @@ #define _ASM_MICROBLAZE_IRQFLAGS_H #include <linux/irqflags.h> +#include <asm/registers.h> # if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR -# define local_irq_save(flags) \ +# define raw_local_irq_save(flags) \ do { \ - asm volatile ("# local_irq_save \n\t" \ - "msrclr %0, %1 \n\t" \ - "nop \n\t" \ + asm volatile (" msrclr %0, %1; \ + nop;" \ : "=r"(flags) \ : "i"(MSR_IE) \ : "memory"); \ } while (0) -# define local_irq_disable() \ - do { \ - asm volatile ("# local_irq_disable \n\t" \ - "msrclr r0, %0 \n\t" \ - "nop \n\t" \ - : \ - : "i"(MSR_IE) \ - : "memory"); \ +# define raw_local_irq_disable() \ + do { \ + asm volatile (" msrclr r0, %0; \ + nop;" \ + : \ + : "i"(MSR_IE) \ + : "memory"); \ } while (0) -# define local_irq_enable() \ - do { \ - asm volatile ("# local_irq_enable \n\t" \ - "msrset r0, %0 \n\t" \ - "nop \n\t" \ - : \ - : "i"(MSR_IE) \ - : "memory"); \ +# define raw_local_irq_enable() \ + do { \ + asm volatile (" msrset r0, %0; \ + nop;" \ + : \ + : "i"(MSR_IE) \ + : "memory"); \ } while (0) # else /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR == 0 */ -# define local_irq_save(flags) \ +# define raw_local_irq_save(flags) \ do { \ register unsigned tmp; \ - asm volatile ("# local_irq_save \n\t" \ - "mfs %0, rmsr \n\t" \ - "nop \n\t" \ - "andi %1, %0, %2 \n\t" \ - "mts rmsr, %1 \n\t" \ - "nop \n\t" \ + asm volatile (" mfs %0, rmsr; \ + nop; \ + andi %1, %0, %2; \ + mts rmsr, %1; \ + nop;" \ : "=r"(flags), "=r" (tmp) \ : "i"(~MSR_IE) \ : "memory"); \ } while (0) -# define local_irq_disable() \ +# define raw_local_irq_disable() \ do { \ register unsigned tmp; \ - asm volatile ("# local_irq_disable \n\t" \ - "mfs %0, rmsr \n\t" \ - "nop \n\t" \ - "andi %0, %0, %1 \n\t" \ - "mts rmsr, %0 \n\t" \ - "nop \n\t" \ + asm volatile (" mfs %0, rmsr; \ + nop; \ + andi %0, %0, %1; \ + mts rmsr, %0; \ + nop;" \ : "=r"(tmp) \ : "i"(~MSR_IE) \ : "memory"); \ } while (0) -# define local_irq_enable() \ +# define raw_local_irq_enable() \ do { \ register unsigned tmp; \ - asm volatile ("# local_irq_enable \n\t" \ - "mfs %0, rmsr \n\t" \ - "nop \n\t" \ - "ori %0, %0, %1 \n\t" \ - "mts rmsr, %0 \n\t" \ - "nop \n\t" \ + asm volatile (" mfs %0, rmsr; \ + nop; \ + ori %0, %0, %1; \ + mts rmsr, %0; \ + nop;" \ : "=r"(tmp) \ : "i"(MSR_IE) \ : "memory"); \ @@ -89,35 +84,28 @@ # endif /* CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR */ -#define local_save_flags(flags) \ +#define raw_local_irq_restore(flags) \ do { \ - asm volatile ("# local_save_flags \n\t" \ - "mfs %0, rmsr \n\t" \ - "nop \n\t" \ - : "=r"(flags) \ + asm volatile (" mts rmsr, %0; \ + nop;" \ : \ + : "r"(flags) \ : "memory"); \ } while (0) -#define local_irq_restore(flags) \ - do { \ - asm volatile ("# local_irq_restore \n\t"\ - "mts rmsr, %0 \n\t" \ - "nop \n\t" \ - : \ - : "r"(flags) \ - : "memory"); \ - } while (0) - -static inline int irqs_disabled(void) +static inline unsigned long get_msr(void) { unsigned long flags; - - local_save_flags(flags); - return ((flags & MSR_IE) == 0); + asm volatile (" mfs %0, rmsr; \ + nop;" \ + : "=r"(flags) \ + : \ + : "memory"); \ + return flags; } -#define raw_irqs_disabled irqs_disabled -#define raw_irqs_disabled_flags(flags) ((flags) == 0) +#define raw_local_save_flags(flags) ((flags) = get_msr()) +#define raw_irqs_disabled() ((get_msr() & MSR_IE) == 0) +#define raw_irqs_disabled_flags(flags) ((flags & MSR_IE) == 0) #endif /* _ASM_MICROBLAZE_IRQFLAGS_H */ diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index 880c988c2237..9b66c0fa9a32 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -164,7 +164,8 @@ extern int page_is_ram(unsigned long pfn); # endif /* CONFIG_MMU */ # ifndef CONFIG_MMU -# define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) <= max_mapnr) +# define pfn_valid(pfn) (((pfn) >= min_low_pfn) && \ + ((pfn) <= (min_low_pfn + max_mapnr))) # define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) # else /* CONFIG_MMU */ # define ARCH_PFN_OFFSET (memory_start >> PAGE_SHIFT) diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h index b0131da1387b..7547f5064560 100644 --- a/arch/microblaze/include/asm/pgalloc.h +++ b/arch/microblaze/include/asm/pgalloc.h @@ -106,9 +106,6 @@ extern inline void free_pgd_slow(pgd_t *pgd) */ #define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); }) #define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) -/* FIXME two definition - look below */ -#define pmd_free(mm, x) do { } while (0) -#define pgd_populate(mm, pmd, pte) BUG() static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) @@ -192,14 +189,14 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage) * the pgd will always be present.. */ #define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); }) -/*#define pmd_free(mm, x) do { } while (0)*/ -#define __pmd_free_tlb(tlb, x, addr) do { } while (0) +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb, x, addr) pmd_free((tlb)->mm, x) #define pgd_populate(mm, pmd, pte) BUG() extern int do_check_pgt_cache(int, int); #endif /* CONFIG_MMU */ -#define check_pgt_cache() do {} while (0) +#define check_pgt_cache() do { } while (0) #endif /* _ASM_MICROBLAZE_PGALLOC_H */ diff --git a/arch/microblaze/include/asm/pvr.h b/arch/microblaze/include/asm/pvr.h index 66f1b30dd097..e38abc7714b6 100644 --- a/arch/microblaze/include/asm/pvr.h +++ b/arch/microblaze/include/asm/pvr.h @@ -76,20 +76,23 @@ struct pvr_s { #define PVR3_FSL_LINKS_MASK 0x00000380 /* ICache config PVR masks */ -#define PVR4_USE_ICACHE_MASK 0x80000000 -#define PVR4_ICACHE_ADDR_TAG_BITS_MASK 0x7C000000 -#define PVR4_ICACHE_USE_FSL_MASK 0x02000000 -#define PVR4_ICACHE_ALLOW_WR_MASK 0x01000000 -#define PVR4_ICACHE_LINE_LEN_MASK 0x00E00000 -#define PVR4_ICACHE_BYTE_SIZE_MASK 0x001F0000 +#define PVR4_USE_ICACHE_MASK 0x80000000 /* ICU */ +#define PVR4_ICACHE_ADDR_TAG_BITS_MASK 0x7C000000 /* ICTS */ +#define PVR4_ICACHE_ALLOW_WR_MASK 0x01000000 /* ICW */ +#define PVR4_ICACHE_LINE_LEN_MASK 0x00E00000 /* ICLL */ +#define PVR4_ICACHE_BYTE_SIZE_MASK 0x001F0000 /* ICBS */ +#define PVR4_ICACHE_ALWAYS_USED 0x00008000 /* IAU */ +#define PVR4_ICACHE_INTERFACE 0x00002000 /* ICI */ /* DCache config PVR masks */ -#define PVR5_USE_DCACHE_MASK 0x80000000 -#define PVR5_DCACHE_ADDR_TAG_BITS_MASK 0x7C000000 -#define PVR5_DCACHE_USE_FSL_MASK 0x02000000 -#define PVR5_DCACHE_ALLOW_WR_MASK 0x01000000 -#define PVR5_DCACHE_LINE_LEN_MASK 0x00E00000 -#define PVR5_DCACHE_BYTE_SIZE_MASK 0x001F0000 +#define PVR5_USE_DCACHE_MASK 0x80000000 /* DCU */ +#define PVR5_DCACHE_ADDR_TAG_BITS_MASK 0x7C000000 /* DCTS */ +#define PVR5_DCACHE_ALLOW_WR_MASK 0x01000000 /* DCW */ +#define PVR5_DCACHE_LINE_LEN_MASK 0x00E00000 /* DCLL */ +#define PVR5_DCACHE_BYTE_SIZE_MASK 0x001F0000 /* DCBS */ +#define PVR5_DCACHE_ALWAYS_USED 0x00008000 /* DAU */ +#define PVR5_DCACHE_USE_WRITEBACK 0x00004000 /* DWB */ +#define PVR5_DCACHE_INTERFACE 0x00002000 /* DCI */ /* ICache base address PVR mask */ #define PVR6_ICACHE_BASEADDR_MASK 0xFFFFFFFF @@ -178,11 +181,14 @@ struct pvr_s { ((pvr.pvr[5] & PVR5_DCACHE_ADDR_TAG_BITS_MASK) >> 26) #define PVR_DCACHE_USE_FSL(pvr) (pvr.pvr[5] & PVR5_DCACHE_USE_FSL_MASK) #define PVR_DCACHE_ALLOW_WR(pvr) (pvr.pvr[5] & PVR5_DCACHE_ALLOW_WR_MASK) +/* FIXME two shifts on one line needs any comment */ #define PVR_DCACHE_LINE_LEN(pvr) \ (1 << ((pvr.pvr[5] & PVR5_DCACHE_LINE_LEN_MASK) >> 21)) #define PVR_DCACHE_BYTE_SIZE(pvr) \ (1 << ((pvr.pvr[5] & PVR5_DCACHE_BYTE_SIZE_MASK) >> 16)) +#define PVR_DCACHE_USE_WRITEBACK(pvr) \ + ((pvr.pvr[5] & PVR5_DCACHE_USE_WRITEBACK) >> 14) #define PVR_ICACHE_BASEADDR(pvr) (pvr.pvr[6] & PVR6_ICACHE_BASEADDR_MASK) #define PVR_ICACHE_HIGHADDR(pvr) (pvr.pvr[7] & PVR7_ICACHE_HIGHADDR_MASK) diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index ed67c9ed15b8..7f31394985e0 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -35,6 +35,8 @@ extern void mmu_reset(void); extern void early_console_reg_tlb_alloc(unsigned int addr); # endif /* CONFIG_MMU */ +extern void of_platform_reset_gpio_probe(void); + void time_init(void); void init_IRQ(void); void machine_early_init(const char *cmdline, unsigned int ram, diff --git a/arch/microblaze/include/asm/system.h b/arch/microblaze/include/asm/system.h index b1ed61590660..157970688b2a 100644 --- a/arch/microblaze/include/asm/system.h +++ b/arch/microblaze/include/asm/system.h @@ -16,6 +16,8 @@ #include <asm-generic/cmpxchg.h> #include <asm-generic/cmpxchg-local.h> +#define __ARCH_WANT_INTERRUPTS_ON_CTXSW + struct task_struct; struct thread_info; diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index 5431b4631a7a..371bd6e56d9a 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -272,8 +272,9 @@ static inline int clear_user(char *to, int size) return size; } -extern unsigned long __copy_tofrom_user(void __user *to, - const void __user *from, unsigned long size); +#define __copy_from_user(to, from, n) copy_from_user((to), (from), (n)) +#define __copy_from_user_inatomic(to, from, n) \ + copy_from_user((to), (from), (n)) #define copy_to_user(to, from, n) \ (access_ok(VERIFY_WRITE, (to), (n)) ? \ @@ -290,10 +291,6 @@ extern unsigned long __copy_tofrom_user(void __user *to, (void __user *)(from), (n)) \ : -EFAULT) -#define __copy_from_user(to, from, n) copy_from_user((to), (from), (n)) -#define __copy_from_user_inatomic(to, from, n) \ - copy_from_user((to), (from), (n)) - extern int __strncpy_user(char *to, const char __user *from, int len); extern int __strnlen_user(const char __user *sstr, int len); @@ -305,6 +302,9 @@ extern int __strnlen_user(const char __user *sstr, int len); #endif /* CONFIG_MMU */ +extern unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size); + /* * The exception table consists of pairs of addresses: the first is the * address of an instruction that is allowed to fault, and the second is diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile index d487729683de..b07594eccf9b 100644 --- a/arch/microblaze/kernel/Makefile +++ b/arch/microblaze/kernel/Makefile @@ -2,12 +2,22 @@ # Makefile # +ifdef CONFIG_FUNCTION_TRACER +# Do not trace early boot code and low level code +CFLAGS_REMOVE_timer.o = -pg +CFLAGS_REMOVE_intc.o = -pg +CFLAGS_REMOVE_early_printk.o = -pg +CFLAGS_REMOVE_selfmod.o = -pg +CFLAGS_REMOVE_heartbeat.o = -pg +CFLAGS_REMOVE_ftrace.o = -pg +endif + extra-y := head.o vmlinux.lds obj-y += exceptions.o \ hw_exception_handler.o init_task.o intc.o irq.o of_device.o \ of_platform.o process.o prom.o prom_parse.o ptrace.o \ - setup.o signal.o sys_microblaze.o timer.o traps.o + setup.o signal.o sys_microblaze.o timer.o traps.o reset.o obj-y += cpu/ @@ -16,5 +26,7 @@ obj-$(CONFIG_SELFMOD) += selfmod.o obj-$(CONFIG_HEART_BEAT) += heartbeat.o obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o obj-$(CONFIG_MMU) += misc.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o +obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o mcount.o obj-y += entry$(MMU).o diff --git a/arch/microblaze/kernel/cpu/Makefile b/arch/microblaze/kernel/cpu/Makefile index 20646e549271..59cc7bceaf8c 100644 --- a/arch/microblaze/kernel/cpu/Makefile +++ b/arch/microblaze/kernel/cpu/Makefile @@ -2,6 +2,10 @@ # Build the appropriate CPU version support # +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_cache.o = -pg +endif + EXTRA_CFLAGS += -DCPU_MAJOR=$(CPU_MAJOR) -DCPU_MINOR=$(CPU_MINOR) \ -DCPU_REV=$(CPU_REV) diff --git a/arch/microblaze/kernel/cpu/cache.c b/arch/microblaze/kernel/cpu/cache.c index af866a450125..d9d63831cc2f 100644 --- a/arch/microblaze/kernel/cpu/cache.c +++ b/arch/microblaze/kernel/cpu/cache.c @@ -3,7 +3,7 @@ * * Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu> * Copyright (C) 2007-2009 PetaLogix - * Copyright (C) 2007 John Williams <john.williams@petalogix.com> + * Copyright (C) 2007-2009 John Williams <john.williams@petalogix.com> * * This file is subject to the terms and conditions of the GNU General * Public License. See the file COPYING in the main directory of this @@ -13,243 +13,534 @@ #include <asm/cacheflush.h> #include <linux/cache.h> #include <asm/cpuinfo.h> +#include <asm/pvr.h> -/* Exported functions */ +static inline void __invalidate_flush_icache(unsigned int addr) +{ + __asm__ __volatile__ ("wic %0, r0;" \ + : : "r" (addr)); +} + +static inline void __flush_dcache(unsigned int addr) +{ + __asm__ __volatile__ ("wdc.flush %0, r0;" \ + : : "r" (addr)); +} + +static inline void __invalidate_dcache(unsigned int baseaddr, + unsigned int offset) +{ + __asm__ __volatile__ ("wdc.clear %0, %1;" \ + : : "r" (baseaddr), "r" (offset)); +} -void _enable_icache(void) +static inline void __enable_icache_msr(void) { - if (cpuinfo.use_icache) { -#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR - __asm__ __volatile__ (" \ - msrset r0, %0; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ + __asm__ __volatile__ (" msrset r0, %0; \ + nop; " \ + : : "i" (MSR_ICE) : "memory"); +} + +static inline void __disable_icache_msr(void) +{ + __asm__ __volatile__ (" msrclr r0, %0; \ + nop; " \ + : : "i" (MSR_ICE) : "memory"); +} + +static inline void __enable_dcache_msr(void) +{ + __asm__ __volatile__ (" msrset r0, %0; \ + nop; " \ + : \ + : "i" (MSR_DCE) \ : "memory"); -#else - __asm__ __volatile__ (" \ - mfs r12, rmsr; \ - nop; \ - ori r12, r12, %0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ - : "memory", "r12"); -#endif - } } -void _disable_icache(void) +static inline void __disable_dcache_msr(void) { - if (cpuinfo.use_icache) { -#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR - __asm__ __volatile__ (" \ - msrclr r0, %0; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ + __asm__ __volatile__ (" msrclr r0, %0; \ + nop; " \ + : \ + : "i" (MSR_DCE) \ : "memory"); -#else - __asm__ __volatile__ (" \ - mfs r12, rmsr; \ - nop; \ - andi r12, r12, ~%0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_ICE) \ +} + +static inline void __enable_icache_nomsr(void) +{ + __asm__ __volatile__ (" mfs r12, rmsr; \ + nop; \ + ori r12, r12, %0; \ + mts rmsr, r12; \ + nop; " \ + : \ + : "i" (MSR_ICE) \ : "memory", "r12"); -#endif - } } -void _invalidate_icache(unsigned int addr) +static inline void __disable_icache_nomsr(void) { - if (cpuinfo.use_icache) { - __asm__ __volatile__ (" \ - wic %0, r0" \ - : \ - : "r" (addr)); - } + __asm__ __volatile__ (" mfs r12, rmsr; \ + nop; \ + andi r12, r12, ~%0; \ + mts rmsr, r12; \ + nop; " \ + : \ + : "i" (MSR_ICE) \ + : "memory", "r12"); } -void _enable_dcache(void) +static inline void __enable_dcache_nomsr(void) { - if (cpuinfo.use_dcache) { -#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR - __asm__ __volatile__ (" \ - msrset r0, %0; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory"); -#else - __asm__ __volatile__ (" \ - mfs r12, rmsr; \ - nop; \ - ori r12, r12, %0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ + __asm__ __volatile__ (" mfs r12, rmsr; \ + nop; \ + ori r12, r12, %0; \ + mts rmsr, r12; \ + nop; " \ + : \ + : "i" (MSR_DCE) \ : "memory", "r12"); -#endif - } } -void _disable_dcache(void) +static inline void __disable_dcache_nomsr(void) { -#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR - __asm__ __volatile__ (" \ - msrclr r0, %0; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ - : "memory"); -#else - __asm__ __volatile__ (" \ - mfs r12, rmsr; \ - nop; \ - andi r12, r12, ~%0; \ - mts rmsr, r12; \ - nop; " \ - : \ - : "i" (MSR_DCE) \ + __asm__ __volatile__ (" mfs r12, rmsr; \ + nop; \ + andi r12, r12, ~%0; \ + mts rmsr, r12; \ + nop; " \ + : \ + : "i" (MSR_DCE) \ : "memory", "r12"); -#endif } -void _invalidate_dcache(unsigned int addr) + +/* Helper macro for computing the limits of cache range loops */ +#define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size) \ +do { \ + int align = ~(cache_line_length - 1); \ + end = min(start + cache_size, end); \ + start &= align; \ + end = ((end & align) + cache_line_length); \ +} while (0); + +/* + * Helper macro to loop over the specified cache_size/line_length and + * execute 'op' on that cacheline + */ +#define CACHE_ALL_LOOP(cache_size, line_length, op) \ +do { \ + unsigned int len = cache_size; \ + int step = -line_length; \ + BUG_ON(step >= 0); \ + \ + __asm__ __volatile__ (" 1: " #op " %0, r0; \ + bgtid %0, 1b; \ + addk %0, %0, %1; \ + " : : "r" (len), "r" (step) \ + : "memory"); \ +} while (0); + + +#define CACHE_ALL_LOOP2(cache_size, line_length, op) \ +do { \ + unsigned int len = cache_size; \ + int step = -line_length; \ + BUG_ON(step >= 0); \ + \ + __asm__ __volatile__ (" 1: " #op " r0, %0; \ + bgtid %0, 1b; \ + addk %0, %0, %1; \ + " : : "r" (len), "r" (step) \ + : "memory"); \ +} while (0); + +/* for wdc.flush/clear */ +#define CACHE_RANGE_LOOP_2(start, end, line_length, op) \ +do { \ + int step = -line_length; \ + int count = end - start; \ + BUG_ON(count <= 0); \ + \ + __asm__ __volatile__ (" 1: " #op " %0, %1; \ + bgtid %1, 1b; \ + addk %1, %1, %2; \ + " : : "r" (start), "r" (count), \ + "r" (step) : "memory"); \ +} while (0); + +/* It is used only first parameter for OP - for wic, wdc */ +#define CACHE_RANGE_LOOP_1(start, end, line_length, op) \ +do { \ + int step = -line_length; \ + int count = end - start; \ + BUG_ON(count <= 0); \ + \ + __asm__ __volatile__ (" 1: addk %0, %0, %1; \ + " #op " %0, r0; \ + bgtid %1, 1b; \ + addk %1, %1, %2; \ + " : : "r" (start), "r" (count), \ + "r" (step) : "memory"); \ +} while (0); + +static void __flush_icache_range_msr_irq(unsigned long start, unsigned long end) { - __asm__ __volatile__ (" \ - wdc %0, r0" \ - : \ - : "r" (addr)); + unsigned long flags; + + pr_debug("%s: start 0x%x, end 0x%x\n", __func__, + (unsigned int)start, (unsigned int) end); + + CACHE_LOOP_LIMITS(start, end, + cpuinfo.icache_line_length, cpuinfo.icache_size); + + local_irq_save(flags); + __disable_icache_msr(); + + CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic); + + __enable_icache_msr(); + local_irq_restore(flags); } -void __invalidate_icache_all(void) +static void __flush_icache_range_nomsr_irq(unsigned long start, + unsigned long end) { - unsigned int i; - unsigned flags; + unsigned long flags; - if (cpuinfo.use_icache) { - local_irq_save(flags); - __disable_icache(); + pr_debug("%s: start 0x%x, end 0x%x\n", __func__, + (unsigned int)start, (unsigned int) end); - /* Just loop through cache size and invalidate, no need to add - CACHE_BASE address */ - for (i = 0; i < cpuinfo.icache_size; - i += cpuinfo.icache_line) - __invalidate_icache(i); + CACHE_LOOP_LIMITS(start, end, + cpuinfo.icache_line_length, cpuinfo.icache_size); - __enable_icache(); - local_irq_restore(flags); - } + local_irq_save(flags); + __disable_icache_nomsr(); + + CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic); + + __enable_icache_nomsr(); + local_irq_restore(flags); } -void __invalidate_icache_range(unsigned long start, unsigned long end) +static void __flush_icache_range_noirq(unsigned long start, + unsigned long end) { - unsigned int i; - unsigned flags; - unsigned int align; - - if (cpuinfo.use_icache) { - /* - * No need to cover entire cache range, - * just cover cache footprint - */ - end = min(start + cpuinfo.icache_size, end); - align = ~(cpuinfo.icache_line - 1); - start &= align; /* Make sure we are aligned */ - /* Push end up to the next cache line */ - end = ((end & align) + cpuinfo.icache_line); - - local_irq_save(flags); - __disable_icache(); - - for (i = start; i < end; i += cpuinfo.icache_line) - __invalidate_icache(i); - - __enable_icache(); - local_irq_restore(flags); - } + pr_debug("%s: start 0x%x, end 0x%x\n", __func__, + (unsigned int)start, (unsigned int) end); + + CACHE_LOOP_LIMITS(start, end, + cpuinfo.icache_line_length, cpuinfo.icache_size); + CACHE_RANGE_LOOP_1(start, end, cpuinfo.icache_line_length, wic); +} + +static void __flush_icache_all_msr_irq(void) +{ + unsigned long flags; + + pr_debug("%s\n", __func__); + + local_irq_save(flags); + __disable_icache_msr(); + + CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic); + + __enable_icache_msr(); + local_irq_restore(flags); +} + +static void __flush_icache_all_nomsr_irq(void) +{ + unsigned long flags; + + pr_debug("%s\n", __func__); + + local_irq_save(flags); + __disable_icache_nomsr(); + + CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic); + + __enable_icache_nomsr(); + local_irq_restore(flags); } -void __invalidate_icache_page(struct vm_area_struct *vma, struct page *page) +static void __flush_icache_all_noirq(void) { - __invalidate_icache_all(); + pr_debug("%s\n", __func__); + CACHE_ALL_LOOP(cpuinfo.icache_size, cpuinfo.icache_line_length, wic); } -void __invalidate_icache_user_range(struct vm_area_struct *vma, - struct page *page, unsigned long adr, - int len) +static void __invalidate_dcache_all_msr_irq(void) { - __invalidate_icache_all(); + unsigned long flags; + + pr_debug("%s\n", __func__); + + local_irq_save(flags); + __disable_dcache_msr(); + + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc); + + __enable_dcache_msr(); + local_irq_restore(flags); } -void __invalidate_cache_sigtramp(unsigned long addr) +static void __invalidate_dcache_all_nomsr_irq(void) { - __invalidate_icache_range(addr, addr + 8); + unsigned long flags; + + pr_debug("%s\n", __func__); + + local_irq_save(flags); + __disable_dcache_nomsr(); + + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc); + + __enable_dcache_nomsr(); + local_irq_restore(flags); } -void __invalidate_dcache_all(void) +static void __invalidate_dcache_all_noirq_wt(void) { - unsigned int i; - unsigned flags; - - if (cpuinfo.use_dcache) { - local_irq_save(flags); - __disable_dcache(); - - /* - * Just loop through cache size and invalidate, - * no need to add CACHE_BASE address - */ - for (i = 0; i < cpuinfo.dcache_size; - i += cpuinfo.dcache_line) - __invalidate_dcache(i); - - __enable_dcache(); - local_irq_restore(flags); - } + pr_debug("%s\n", __func__); + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, wdc) } -void __invalidate_dcache_range(unsigned long start, unsigned long end) +/* FIXME this is weird - should be only wdc but not work + * MS: I am getting bus errors and other weird things */ +static void __invalidate_dcache_all_wb(void) { + pr_debug("%s\n", __func__); + CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length, + wdc.clear) + +#if 0 unsigned int i; - unsigned flags; - unsigned int align; - - if (cpuinfo.use_dcache) { - /* - * No need to cover entire cache range, - * just cover cache footprint - */ - end = min(start + cpuinfo.dcache_size, end); - align = ~(cpuinfo.dcache_line - 1); - start &= align; /* Make sure we are aligned */ - /* Push end up to the next cache line */ - end = ((end & align) + cpuinfo.dcache_line); - local_irq_save(flags); - __disable_dcache(); - - for (i = start; i < end; i += cpuinfo.dcache_line) - __invalidate_dcache(i); - - __enable_dcache(); - local_irq_restore(flags); - } + + pr_debug("%s\n", __func__); + + /* Just loop through cache size and invalidate it */ + for (i = 0; i < cpuinfo.dcache_size; i += cpuinfo.dcache_line_length) + __invalidate_dcache(0, i); +#endif +} + +static void __invalidate_dcache_range_wb(unsigned long start, + unsigned long end) +{ + pr_debug("%s: start 0x%x, end 0x%x\n", __func__, + (unsigned int)start, (unsigned int) end); + + CACHE_LOOP_LIMITS(start, end, + cpuinfo.dcache_line_length, cpuinfo.dcache_size); + CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear); +} + +static void __invalidate_dcache_range_nomsr_wt(unsigned long start, + unsigned long end) +{ + pr_debug("%s: start 0x%x, end 0x%x\n", __func__, + (unsigned int)start, (unsigned int) end); + CACHE_LOOP_LIMITS(start, end, + cpuinfo.dcache_line_length, cpuinfo.dcache_size); + + CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); } -void __invalidate_dcache_page(struct vm_area_struct *vma, struct page *page) +static void __invalidate_dcache_range_msr_irq_wt(unsigned long start, + unsigned long end) { - __invalidate_dcache_all(); + unsigned long flags; + + pr_debug("%s: start 0x%x, end 0x%x\n", __func__, + (unsigned int)start, (unsigned int) end); + CACHE_LOOP_LIMITS(start, end, + cpuinfo.dcache_line_length, cpuinfo.dcache_size); + + local_irq_save(flags); + __disable_dcache_msr(); + + CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); + + __enable_dcache_msr(); + local_irq_restore(flags); +} + +static void __invalidate_dcache_range_nomsr_irq(unsigned long start, + unsigned long end) +{ + unsigned long flags; + + pr_debug("%s: start 0x%x, end 0x%x\n", __func__, + (unsigned int)start, (unsigned int) end); + + CACHE_LOOP_LIMITS(start, end, + cpuinfo.dcache_line_length, cpuinfo.dcache_size); + + local_irq_save(flags); + __disable_dcache_nomsr(); + + CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc); + + __enable_dcache_nomsr(); + local_irq_restore(flags); +} + +static void __flush_dcache_all_wb(void) +{ + pr_debug("%s\n", __func__); + CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length, + wdc.flush); } -void __invalidate_dcache_user_range(struct vm_area_struct *vma, - struct page *page, unsigned long adr, - int len) +static void __flush_dcache_range_wb(unsigned long start, unsigned long end) { - __invalidate_dcache_all(); + pr_debug("%s: start 0x%x, end 0x%x\n", __func__, + (unsigned int)start, (unsigned int) end); + + CACHE_LOOP_LIMITS(start, end, + cpuinfo.dcache_line_length, cpuinfo.dcache_size); + CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush); +} + +/* struct for wb caches and for wt caches */ +struct scache *mbc; + +/* new wb cache model */ +const struct scache wb_msr = { + .ie = __enable_icache_msr, + .id = __disable_icache_msr, + .ifl = __flush_icache_all_noirq, + .iflr = __flush_icache_range_noirq, + .iin = __flush_icache_all_noirq, + .iinr = __flush_icache_range_noirq, + .de = __enable_dcache_msr, + .dd = __disable_dcache_msr, + .dfl = __flush_dcache_all_wb, + .dflr = __flush_dcache_range_wb, + .din = __invalidate_dcache_all_wb, + .dinr = __invalidate_dcache_range_wb, +}; + +/* There is only difference in ie, id, de, dd functions */ +const struct scache wb_nomsr = { + .ie = __enable_icache_nomsr, + .id = __disable_icache_nomsr, + .ifl = __flush_icache_all_noirq, + .iflr = __flush_icache_range_noirq, + .iin = __flush_icache_all_noirq, + .iinr = __flush_icache_range_noirq, + .de = __enable_dcache_nomsr, + .dd = __disable_dcache_nomsr, + .dfl = __flush_dcache_all_wb, + .dflr = __flush_dcache_range_wb, + .din = __invalidate_dcache_all_wb, + .dinr = __invalidate_dcache_range_wb, +}; + +/* Old wt cache model with disabling irq and turn off cache */ +const struct scache wt_msr = { + .ie = __enable_icache_msr, + .id = __disable_icache_msr, + .ifl = __flush_icache_all_msr_irq, + .iflr = __flush_icache_range_msr_irq, + .iin = __flush_icache_all_msr_irq, + .iinr = __flush_icache_range_msr_irq, + .de = __enable_dcache_msr, + .dd = __disable_dcache_msr, + .dfl = __invalidate_dcache_all_msr_irq, + .dflr = __invalidate_dcache_range_msr_irq_wt, + .din = __invalidate_dcache_all_msr_irq, + .dinr = __invalidate_dcache_range_msr_irq_wt, +}; + +const struct scache wt_nomsr = { + .ie = __enable_icache_nomsr, + .id = __disable_icache_nomsr, + .ifl = __flush_icache_all_nomsr_irq, + .iflr = __flush_icache_range_nomsr_irq, + .iin = __flush_icache_all_nomsr_irq, + .iinr = __flush_icache_range_nomsr_irq, + .de = __enable_dcache_nomsr, + .dd = __disable_dcache_nomsr, + .dfl = __invalidate_dcache_all_nomsr_irq, + .dflr = __invalidate_dcache_range_nomsr_irq, + .din = __invalidate_dcache_all_nomsr_irq, + .dinr = __invalidate_dcache_range_nomsr_irq, +}; + +/* New wt cache model for newer Microblaze versions */ +const struct scache wt_msr_noirq = { + .ie = __enable_icache_msr, + .id = __disable_icache_msr, + .ifl = __flush_icache_all_noirq, + .iflr = __flush_icache_range_noirq, + .iin = __flush_icache_all_noirq, + .iinr = __flush_icache_range_noirq, + .de = __enable_dcache_msr, + .dd = __disable_dcache_msr, + .dfl = __invalidate_dcache_all_noirq_wt, + .dflr = __invalidate_dcache_range_nomsr_wt, + .din = __invalidate_dcache_all_noirq_wt, + .dinr = __invalidate_dcache_range_nomsr_wt, +}; + +const struct scache wt_nomsr_noirq = { + .ie = __enable_icache_nomsr, + .id = __disable_icache_nomsr, + .ifl = __flush_icache_all_noirq, + .iflr = __flush_icache_range_noirq, + .iin = __flush_icache_all_noirq, + .iinr = __flush_icache_range_noirq, + .de = __enable_dcache_nomsr, + .dd = __disable_dcache_nomsr, + .dfl = __invalidate_dcache_all_noirq_wt, + .dflr = __invalidate_dcache_range_nomsr_wt, + .din = __invalidate_dcache_all_noirq_wt, + .dinr = __invalidate_dcache_range_nomsr_wt, +}; + +/* CPU version code for 7.20.c - see arch/microblaze/kernel/cpu/cpuinfo.c */ +#define CPUVER_7_20_A 0x0c +#define CPUVER_7_20_D 0x0f + +#define INFO(s) printk(KERN_INFO "cache: " s " \n"); + +void microblaze_cache_init(void) +{ + if (cpuinfo.use_instr & PVR2_USE_MSR_INSTR) { + if (cpuinfo.dcache_wb) { + INFO("wb_msr"); + mbc = (struct scache *)&wb_msr; + if (cpuinfo.ver_code < CPUVER_7_20_D) { + /* MS: problem with signal handling - hw bug */ + INFO("WB won't work properly"); + } + } else { + if (cpuinfo.ver_code >= CPUVER_7_20_A) { + INFO("wt_msr_noirq"); + mbc = (struct scache *)&wt_msr_noirq; + } else { + INFO("wt_msr"); + mbc = (struct scache *)&wt_msr; + } + } + } else { + if (cpuinfo.dcache_wb) { + INFO("wb_nomsr"); + mbc = (struct scache *)&wb_nomsr; + if (cpuinfo.ver_code < CPUVER_7_20_D) { + /* MS: problem with signal handling - hw bug */ + INFO("WB won't work properly"); + } + } else { + if (cpuinfo.ver_code >= CPUVER_7_20_A) { + INFO("wt_nomsr_noirq"); + mbc = (struct scache *)&wt_nomsr_noirq; + } else { + INFO("wt_nomsr"); + mbc = (struct scache *)&wt_nomsr; + } + } + } } diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c index c259786e7faa..f72dbd66c844 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c @@ -21,8 +21,14 @@ */ #define CI(c, p) { ci->c = PVR_##p(pvr); } + +#if defined(CONFIG_EARLY_PRINTK) && defined(CONFIG_SERIAL_UARTLITE_CONSOLE) #define err_printk(x) \ early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n"); +#else +#define err_printk(x) \ + printk(KERN_INFO "ERROR: Microblaze " x "-different for PVR and DTS\n"); +#endif void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) { @@ -70,7 +76,7 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(use_icache, USE_ICACHE); CI(icache_tagbits, ICACHE_ADDR_TAG_BITS); CI(icache_write, ICACHE_ALLOW_WR); - CI(icache_line, ICACHE_LINE_LEN); + ci->icache_line_length = PVR_ICACHE_LINE_LEN(pvr) << 2; CI(icache_size, ICACHE_BYTE_SIZE); CI(icache_base, ICACHE_BASEADDR); CI(icache_high, ICACHE_HIGHADDR); @@ -78,11 +84,16 @@ void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu) CI(use_dcache, USE_DCACHE); CI(dcache_tagbits, DCACHE_ADDR_TAG_BITS); CI(dcache_write, DCACHE_ALLOW_WR); - CI(dcache_line, DCACHE_LINE_LEN); + ci->dcache_line_length = PVR_DCACHE_LINE_LEN(pvr) << 2; CI(dcache_size, DCACHE_BYTE_SIZE); CI(dcache_base, DCACHE_BASEADDR); CI(dcache_high, DCACHE_HIGHADDR); + temp = PVR_DCACHE_USE_WRITEBACK(pvr); + if (ci->dcache_wb != temp) + err_printk("DCACHE WB"); + ci->dcache_wb = temp; + CI(use_dopb, D_OPB); CI(use_iopb, I_OPB); CI(use_dlmb, D_LMB); diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c index adb448f93d5f..6095aa6b5c88 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo-static.c +++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c @@ -72,12 +72,12 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu) ci->use_icache = fcpu(cpu, "xlnx,use-icache"); ci->icache_tagbits = fcpu(cpu, "xlnx,addr-tag-bits"); ci->icache_write = fcpu(cpu, "xlnx,allow-icache-wr"); - ci->icache_line = fcpu(cpu, "xlnx,icache-line-len") << 2; - if (!ci->icache_line) { + ci->icache_line_length = fcpu(cpu, "xlnx,icache-line-len") << 2; + if (!ci->icache_line_length) { if (fcpu(cpu, "xlnx,icache-use-fsl")) - ci->icache_line = 4 << 2; + ci->icache_line_length = 4 << 2; else - ci->icache_line = 1 << 2; + ci->icache_line_length = 1 << 2; } ci->icache_size = fcpu(cpu, "i-cache-size"); ci->icache_base = fcpu(cpu, "i-cache-baseaddr"); @@ -86,16 +86,17 @@ void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu) ci->use_dcache = fcpu(cpu, "xlnx,use-dcache"); ci->dcache_tagbits = fcpu(cpu, "xlnx,dcache-addr-tag"); ci->dcache_write = fcpu(cpu, "xlnx,allow-dcache-wr"); - ci->dcache_line = fcpu(cpu, "xlnx,dcache-line-len") << 2; - if (!ci->dcache_line) { + ci->dcache_line_length = fcpu(cpu, "xlnx,dcache-line-len") << 2; + if (!ci->dcache_line_length) { if (fcpu(cpu, "xlnx,dcache-use-fsl")) - ci->dcache_line = 4 << 2; + ci->dcache_line_length = 4 << 2; else - ci->dcache_line = 1 << 2; + ci->dcache_line_length = 1 << 2; } ci->dcache_size = fcpu(cpu, "d-cache-size"); ci->dcache_base = fcpu(cpu, "d-cache-baseaddr"); ci->dcache_high = fcpu(cpu, "d-cache-highaddr"); + ci->dcache_wb = fcpu(cpu, "xlnx,dcache-use-writeback"); ci->use_dopb = fcpu(cpu, "xlnx,d-opb"); ci->use_iopb = fcpu(cpu, "xlnx,i-opb"); diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 3539babc1c18..991d71311b0e 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -29,11 +29,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"7.20.a", 0x0c}, {"7.20.b", 0x0d}, {"7.20.c", 0x0e}, - /* FIXME There is no keycode defined in MBV for these versions */ - {"2.10.a", 0x10}, - {"3.00.a", 0x20}, - {"4.00.a", 0x30}, - {"4.00.b", 0x40}, + {"7.20.d", 0x0f}, + {"7.30.a", 0x10}, {NULL, 0}, }; diff --git a/arch/microblaze/kernel/cpu/mb.c b/arch/microblaze/kernel/cpu/mb.c index 4dcfccdbc364..0c912b2a8e03 100644 --- a/arch/microblaze/kernel/cpu/mb.c +++ b/arch/microblaze/kernel/cpu/mb.c @@ -103,11 +103,15 @@ static int show_cpuinfo(struct seq_file *m, void *v) else count += seq_printf(m, "Icache:\t\tno\n"); - if (cpuinfo.use_dcache) + if (cpuinfo.use_dcache) { count += seq_printf(m, "Dcache:\t\t%ukB\n", cpuinfo.dcache_size >> 10); - else + if (cpuinfo.dcache_wb) + count += seq_printf(m, "\t\twrite-back\n"); + else + count += seq_printf(m, "\t\twrite-through\n"); + } else count += seq_printf(m, "Dcache:\t\tno\n"); count += seq_printf(m, diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c index c9a4340ddd53..9bee9382bf74 100644 --- a/arch/microblaze/kernel/cpu/pvr.c +++ b/arch/microblaze/kernel/cpu/pvr.c @@ -45,7 +45,7 @@ int cpu_has_pvr(void) { - unsigned flags; + unsigned long flags; unsigned pvr0; local_save_flags(flags); diff --git a/arch/microblaze/kernel/entry-nommu.S b/arch/microblaze/kernel/entry-nommu.S index 9083d85376a4..95b0855802df 100644 --- a/arch/microblaze/kernel/entry-nommu.S +++ b/arch/microblaze/kernel/entry-nommu.S @@ -208,8 +208,6 @@ ENTRY(_user_exception) lwi r1, r1, TS_THREAD_INFO /* get the thread info */ /* calculate kernel stack pointer */ addik r1, r1, THREAD_SIZE - PT_SIZE - swi r11, r0, PER_CPU(R11_SAVE) /* temporarily save r11 */ - lwi r11, r0, PER_CPU(KM) /* load mode indicator */ 2: swi r11, r1, PT_MODE /* store the mode */ lwi r11, r0, PER_CPU(R11_SAVE) /* reload r11 */ diff --git a/arch/microblaze/kernel/entry.S b/arch/microblaze/kernel/entry.S index e3ecb36dd554..3bad4ff49471 100644 --- a/arch/microblaze/kernel/entry.S +++ b/arch/microblaze/kernel/entry.S @@ -31,6 +31,8 @@ #include <linux/errno.h> #include <asm/signal.h> +#undef DEBUG + /* The size of a state save frame. */ #define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE) @@ -352,10 +354,12 @@ C_ENTRY(_user_exception): add r12, r12, r12; /* convert num -> ptr */ add r12, r12, r12; +#ifdef DEBUG /* Trac syscalls and stored them to r0_ram */ lwi r3, r12, 0x400 + r0_ram addi r3, r3, 1 swi r3, r12, 0x400 + r0_ram +#endif # Find and jump into the syscall handler. lwi r12, r12, sys_call_table @@ -496,17 +500,6 @@ C_ENTRY(sys_execve): brid microblaze_execve; /* Do real work (tail-call).*/ nop; -C_ENTRY(sys_rt_sigsuspend_wrapper): - swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - swi r4, r1, PTO+PT_R4; - la r7, r1, PTO; /* add user context as 3rd arg */ - brlid r15, sys_rt_sigsuspend; /* Do real work.*/ - nop; - lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - lwi r4, r1, PTO+PT_R4; - bri ret_from_trap /* fall through will not work here due to align */ - nop; - C_ENTRY(sys_rt_sigreturn_wrapper): swi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ swi r4, r1, PTO+PT_R4; @@ -711,15 +704,11 @@ C_ENTRY(ret_from_exc): * (in a possibly modified form) after do_signal returns. * store return registers separately because this macros is use * for others exceptions */ - swi r3, r1, PTO + PT_R3; - swi r4, r1, PTO + PT_R4; la r5, r1, PTO; /* Arg 1: struct pt_regs *regs */ add r6, r0, r0; /* Arg 2: sigset_t *oldset */ addi r7, r0, 0; /* Arg 3: int in_syscall */ bralid r15, do_signal; /* Handle any signals */ nop; - lwi r3, r1, PTO+PT_R3; /* restore saved r3, r4 registers */ - lwi r4, r1, PTO+PT_R4; /* Finally, return to user state. */ 1: swi r0, r0, PER_CPU(KM); /* Now officially in user state. */ diff --git a/arch/microblaze/kernel/ftrace.c b/arch/microblaze/kernel/ftrace.c new file mode 100644 index 000000000000..388b31ca65a1 --- /dev/null +++ b/arch/microblaze/kernel/ftrace.c @@ -0,0 +1,237 @@ +/* + * Ftrace support for Microblaze. + * + * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2009 PetaLogix + * + * Based on MIPS and PowerPC ftrace code + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <asm/cacheflush.h> +#include <linux/ftrace.h> + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +/* + * Hook the return address and push it in the stack of return addrs + * in current thread info. + */ +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) +{ + unsigned long old; + int faulted, err; + struct ftrace_graph_ent trace; + unsigned long return_hooker = (unsigned long) + &return_to_handler; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + /* + * Protect against fault, even if it shouldn't + * happen. This tool is too much intrusive to + * ignore such a protection. + */ + asm volatile(" 1: lwi %0, %2, 0; \ + 2: swi %3, %2, 0; \ + addik %1, r0, 0; \ + 3: \ + .section .fixup, \"ax\"; \ + 4: brid 3b; \ + addik %1, r0, 1; \ + .previous; \ + .section __ex_table,\"a\"; \ + .word 1b,4b; \ + .word 2b,4b; \ + .previous;" \ + : "=&r" (old), "=r" (faulted) + : "r" (parent), "r" (return_hooker) + ); + + if (unlikely(faulted)) { + ftrace_graph_stop(); + WARN_ON(1); + return; + } + + err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0); + if (err == -EBUSY) { + *parent = old; + return; + } + + trace.func = self_addr; + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + *parent = old; + } +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + +#ifdef CONFIG_DYNAMIC_FTRACE +/* save value to addr - it is save to do it in asm */ +static int ftrace_modify_code(unsigned long addr, unsigned int value) +{ + int faulted = 0; + + __asm__ __volatile__(" 1: swi %2, %1, 0; \ + addik %0, r0, 0; \ + 2: \ + .section .fixup, \"ax\"; \ + 3: brid 2b; \ + addik %0, r0, 1; \ + .previous; \ + .section __ex_table,\"a\"; \ + .word 1b,3b; \ + .previous;" \ + : "=r" (faulted) + : "r" (addr), "r" (value) + ); + + if (unlikely(faulted)) + return -EFAULT; + + return 0; +} + +#define MICROBLAZE_NOP 0x80000000 +#define MICROBLAZE_BRI 0xb800000C + +static unsigned int recorded; /* if save was or not */ +static unsigned int imm; /* saving whole imm instruction */ + +/* There are two approaches howto solve ftrace_make nop function - look below */ +#undef USE_FTRACE_NOP + +#ifdef USE_FTRACE_NOP +static unsigned int bralid; /* saving whole bralid instruction */ +#endif + +int ftrace_make_nop(struct module *mod, + struct dyn_ftrace *rec, unsigned long addr) +{ + /* we have this part of code which we are working with + * b000c000 imm -16384 + * b9fc8e30 bralid r15, -29136 // c0008e30 <_mcount> + * 80000000 or r0, r0, r0 + * + * The first solution (!USE_FTRACE_NOP-could be called branch solution) + * b000c000 bri 12 (0xC - jump to any other instruction) + * b9fc8e30 bralid r15, -29136 // c0008e30 <_mcount> + * 80000000 or r0, r0, r0 + * any other instruction + * + * The second solution (USE_FTRACE_NOP) - no jump just nops + * 80000000 or r0, r0, r0 + * 80000000 or r0, r0, r0 + * 80000000 or r0, r0, r0 + */ + int ret = 0; + + if (recorded == 0) { + recorded = 1; + imm = *(unsigned int *)rec->ip; + pr_debug("%s: imm:0x%x\n", __func__, imm); +#ifdef USE_FTRACE_NOP + bralid = *(unsigned int *)(rec->ip + 4); + pr_debug("%s: bralid 0x%x\n", __func__, bralid); +#endif /* USE_FTRACE_NOP */ + } + +#ifdef USE_FTRACE_NOP + ret = ftrace_modify_code(rec->ip, MICROBLAZE_NOP); + ret += ftrace_modify_code(rec->ip + 4, MICROBLAZE_NOP); +#else /* USE_FTRACE_NOP */ + ret = ftrace_modify_code(rec->ip, MICROBLAZE_BRI); +#endif /* USE_FTRACE_NOP */ + return ret; +} + +static int ret_addr; /* initialized as 0 by default */ + +/* I believe that first is called ftrace_make_nop before this function */ +int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) +{ + int ret; + ret_addr = addr; /* saving where the barrier jump is */ + pr_debug("%s: addr:0x%x, rec->ip: 0x%x, imm:0x%x\n", + __func__, (unsigned int)addr, (unsigned int)rec->ip, imm); + ret = ftrace_modify_code(rec->ip, imm); +#ifdef USE_FTRACE_NOP + pr_debug("%s: bralid:0x%x\n", __func__, bralid); + ret += ftrace_modify_code(rec->ip + 4, bralid); +#endif /* USE_FTRACE_NOP */ + return ret; +} + +int __init ftrace_dyn_arch_init(void *data) +{ + /* The return code is retured via data */ + *(unsigned long *)data = 0; + + return 0; +} + +int ftrace_update_ftrace_func(ftrace_func_t func) +{ + unsigned long ip = (unsigned long)(&ftrace_call); + unsigned int upper = (unsigned int)func; + unsigned int lower = (unsigned int)func; + int ret = 0; + + /* create proper saving to ftrace_call poll */ + upper = 0xb0000000 + (upper >> 16); /* imm func_upper */ + lower = 0x32800000 + (lower & 0xFFFF); /* addik r20, r0, func_lower */ + + pr_debug("%s: func=0x%x, ip=0x%x, upper=0x%x, lower=0x%x\n", + __func__, (unsigned int)func, (unsigned int)ip, upper, lower); + + /* save upper and lower code */ + ret = ftrace_modify_code(ip, upper); + ret += ftrace_modify_code(ip + 4, lower); + + /* We just need to remove the rtsd r15, 8 by NOP */ + BUG_ON(!ret_addr); + if (ret_addr) + ret += ftrace_modify_code(ret_addr, MICROBLAZE_NOP); + else + ret = 1; /* fault */ + + /* All changes are done - lets do caches consistent */ + flush_icache(); + return ret; +} + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +unsigned int old_jump; /* saving place for jump instruction */ + +int ftrace_enable_ftrace_graph_caller(void) +{ + unsigned int ret; + unsigned long ip = (unsigned long)(&ftrace_call_graph); + + old_jump = *(unsigned int *)ip; /* save jump over instruction */ + ret = ftrace_modify_code(ip, MICROBLAZE_NOP); + flush_icache(); + + pr_debug("%s: Replace instruction: 0x%x\n", __func__, old_jump); + return ret; +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + unsigned int ret; + unsigned long ip = (unsigned long)(&ftrace_call_graph); + + ret = ftrace_modify_code(ip, old_jump); + flush_icache(); + + pr_debug("%s\n", __func__); + return ret; +} +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ +#endif /* CONFIG_DYNAMIC_FTRACE */ diff --git a/arch/microblaze/kernel/heartbeat.c b/arch/microblaze/kernel/heartbeat.c index 1bdf20222b92..522751737cfa 100644 --- a/arch/microblaze/kernel/heartbeat.c +++ b/arch/microblaze/kernel/heartbeat.c @@ -45,6 +45,7 @@ void heartbeat(void) void setup_heartbeat(void) { struct device_node *gpio = NULL; + int *prop; int j; char *gpio_list[] = { "xlnx,xps-gpio-1.00.a", @@ -58,10 +59,14 @@ void setup_heartbeat(void) break; } - base_addr = *(int *) of_get_property(gpio, "reg", NULL); - base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE); - printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr); + if (gpio) { + base_addr = *(int *) of_get_property(gpio, "reg", NULL); + base_addr = (unsigned long) ioremap(base_addr, PAGE_SIZE); + printk(KERN_NOTICE "Heartbeat GPIO at 0x%x\n", base_addr); - if (*(int *) of_get_property(gpio, "xlnx,is-bidir", NULL)) - out_be32(base_addr + 4, 0); /* GPIO is configured as output */ + /* GPIO is configured as output */ + prop = (int *) of_get_property(gpio, "xlnx,is-bidir", NULL); + if (prop) + out_be32(base_addr + 4, 0); + } } diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index 6eea6f92b84e..03172c1da770 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -42,8 +42,16 @@ unsigned int nr_irq; static void intc_enable_or_unmask(unsigned int irq) { + unsigned long mask = 1 << irq; pr_debug("enable_or_unmask: %d\n", irq); - out_be32(INTC_BASE + SIE, 1 << irq); + out_be32(INTC_BASE + SIE, mask); + + /* ack level irqs because they can't be acked during + * ack function since the handle_level_irq function + * acks the irq before calling the interrupt handler + */ + if (irq_desc[irq].status & IRQ_LEVEL) + out_be32(INTC_BASE + IAR, mask); } static void intc_disable_or_mask(unsigned int irq) diff --git a/arch/microblaze/kernel/mcount.S b/arch/microblaze/kernel/mcount.S new file mode 100644 index 000000000000..e7eaa7a8cbd3 --- /dev/null +++ b/arch/microblaze/kernel/mcount.S @@ -0,0 +1,170 @@ +/* + * Low-level ftrace handling + * + * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2009 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#include <linux/linkage.h> + +#define NOALIGN_ENTRY(name) .globl name; name: + +/* FIXME MS: I think that I don't need to save all regs */ +#define SAVE_REGS \ + addik r1, r1, -120; \ + swi r2, r1, 4; \ + swi r3, r1, 8; \ + swi r4, r1, 12; \ + swi r5, r1, 116; \ + swi r6, r1, 16; \ + swi r7, r1, 20; \ + swi r8, r1, 24; \ + swi r9, r1, 28; \ + swi r10, r1, 32; \ + swi r11, r1, 36; \ + swi r12, r1, 40; \ + swi r13, r1, 44; \ + swi r14, r1, 48; \ + swi r16, r1, 52; \ + swi r17, r1, 56; \ + swi r18, r1, 60; \ + swi r19, r1, 64; \ + swi r20, r1, 68; \ + swi r21, r1, 72; \ + swi r22, r1, 76; \ + swi r23, r1, 80; \ + swi r24, r1, 84; \ + swi r25, r1, 88; \ + swi r26, r1, 92; \ + swi r27, r1, 96; \ + swi r28, r1, 100; \ + swi r29, r1, 104; \ + swi r30, r1, 108; \ + swi r31, r1, 112; + +#define RESTORE_REGS \ + lwi r2, r1, 4; \ + lwi r3, r1, 8; \ + lwi r4, r1, 12; \ + lwi r5, r1, 116; \ + lwi r6, r1, 16; \ + lwi r7, r1, 20; \ + lwi r8, r1, 24; \ + lwi r9, r1, 28; \ + lwi r10, r1, 32; \ + lwi r11, r1, 36; \ + lwi r12, r1, 40; \ + lwi r13, r1, 44; \ + lwi r14, r1, 48; \ + lwi r16, r1, 52; \ + lwi r17, r1, 56; \ + lwi r18, r1, 60; \ + lwi r19, r1, 64; \ + lwi r20, r1, 68; \ + lwi r21, r1, 72; \ + lwi r22, r1, 76; \ + lwi r23, r1, 80; \ + lwi r24, r1, 84; \ + lwi r25, r1, 88; \ + lwi r26, r1, 92; \ + lwi r27, r1, 96; \ + lwi r28, r1, 100; \ + lwi r29, r1, 104; \ + lwi r30, r1, 108; \ + lwi r31, r1, 112; \ + addik r1, r1, 120; + +ENTRY(ftrace_stub) + rtsd r15, 8; + nop; + +ENTRY(_mcount) +#ifdef CONFIG_DYNAMIC_FTRACE +ENTRY(ftrace_caller) + /* MS: It is just barrier which is removed from C code */ + rtsd r15, 8 + nop +#endif /* CONFIG_DYNAMIC_FTRACE */ + SAVE_REGS + swi r15, r1, 0; + /* MS: HAVE_FUNCTION_TRACE_MCOUNT_TEST begin of checking */ + lwi r5, r0, function_trace_stop; + bneid r5, end; + nop; + /* MS: HAVE_FUNCTION_TRACE_MCOUNT_TEST end of checking */ +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#ifndef CONFIG_DYNAMIC_FTRACE + lwi r5, r0, ftrace_graph_return; + addik r6, r0, ftrace_stub; /* asm implementation */ + cmpu r5, r5, r6; /* ftrace_graph_return != ftrace_stub */ + beqid r5, end_graph_tracer; + nop; + + lwi r6, r0, ftrace_graph_entry; + addik r5, r0, ftrace_graph_entry_stub; /* implemented in C */ + cmpu r5, r5, r6; /* ftrace_graph_entry != ftrace_graph_entry_stub */ + beqid r5, end_graph_tracer; + nop; +#else /* CONFIG_DYNAMIC_FTRACE */ +NOALIGN_ENTRY(ftrace_call_graph) + /* MS: jump over graph function - replaced from C code */ + bri end_graph_tracer +#endif /* CONFIG_DYNAMIC_FTRACE */ + addik r5, r1, 120; /* MS: load parent addr */ + addik r6, r15, 0; /* MS: load current function addr */ + bralid r15, prepare_ftrace_return; + nop; + /* MS: graph was taken that's why - can jump over function trace */ + brid end; + nop; +end_graph_tracer: +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ +#ifndef CONFIG_DYNAMIC_FTRACE + /* MS: test function trace if is taken or not */ + lwi r20, r0, ftrace_trace_function; + addik r6, r0, ftrace_stub; + cmpu r5, r20, r6; /* ftrace_trace_function != ftrace_stub */ + beqid r5, end; /* MS: not taken -> jump over */ + nop; +#else /* CONFIG_DYNAMIC_FTRACE */ +NOALIGN_ENTRY(ftrace_call) +/* instruction for setup imm FUNC_part1, addik r20, r0, FUNC_part2 */ + nop + nop +#endif /* CONFIG_DYNAMIC_FTRACE */ +/* static normal trace */ + lwi r6, r1, 120; /* MS: load parent addr */ + addik r5, r15, 0; /* MS: load current function addr */ + /* MS: here is dependency on previous code */ + brald r15, r20; /* MS: jump to ftrace handler */ + nop; +end: + lwi r15, r1, 0; + RESTORE_REGS + + rtsd r15, 8; /* MS: jump back */ + nop; + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +ENTRY(return_to_handler) + nop; /* MS: just barrier for rtsd r15, 8 */ + nop; + SAVE_REGS + swi r15, r1, 0; + + /* MS: find out returning address */ + bralid r15, ftrace_return_to_handler; + nop; + + /* MS: return value from ftrace_return_to_handler is my returning addr + * must be before restore regs because I have to restore r3 content */ + addik r15, r3, 0; + RESTORE_REGS + + rtsd r15, 8; /* MS: jump back */ + nop; +#endif /* CONFIG_FUNCTION_TRACER */ diff --git a/arch/microblaze/kernel/microblaze_ksyms.c b/arch/microblaze/kernel/microblaze_ksyms.c index 59ff20e33e0c..bc4dcb7d3861 100644 --- a/arch/microblaze/kernel/microblaze_ksyms.c +++ b/arch/microblaze/kernel/microblaze_ksyms.c @@ -18,6 +18,7 @@ #include <linux/io.h> #include <asm/page.h> #include <asm/system.h> +#include <linux/ftrace.h> #include <linux/uaccess.h> /* @@ -47,3 +48,7 @@ extern void __umodsi3(void); EXPORT_SYMBOL(__umodsi3); extern char *_ebss; EXPORT_SYMBOL_GPL(_ebss); +#ifdef CONFIG_FUNCTION_TRACER +extern void _mcount(void); +EXPORT_SYMBOL(_mcount); +#endif diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c index c592d475b3d8..812f1bf06c9e 100644 --- a/arch/microblaze/kernel/process.c +++ b/arch/microblaze/kernel/process.c @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <asm/system.h> #include <asm/pgalloc.h> +#include <asm/cacheflush.h> void show_regs(struct pt_regs *regs) { diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c new file mode 100644 index 000000000000..a1721a33042e --- /dev/null +++ b/arch/microblaze/kernel/reset.c @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2009 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> +#include <asm/prom.h> + +/* Trigger specific functions */ +#ifdef CONFIG_GPIOLIB + +#include <linux/of_gpio.h> + +static int handle; /* reset pin handle */ +static unsigned int reset_val; + +static int of_reset_gpio_handle(void) +{ + int ret; /* variable which stored handle reset gpio pin */ + struct device_node *root; /* root node */ + struct device_node *gpio; /* gpio node */ + struct of_gpio_chip *of_gc = NULL; + enum of_gpio_flags flags ; + const void *gpio_spec; + + /* find out root node */ + root = of_find_node_by_path("/"); + + /* give me handle for gpio node to be possible allocate pin */ + ret = of_parse_phandles_with_args(root, "hard-reset-gpios", + "#gpio-cells", 0, &gpio, &gpio_spec); + if (ret) { + pr_debug("%s: can't parse gpios property\n", __func__); + goto err0; + } + + of_gc = gpio->data; + if (!of_gc) { + pr_debug("%s: gpio controller %s isn't registered\n", + root->full_name, gpio->full_name); + ret = -ENODEV; + goto err1; + } + + ret = of_gc->xlate(of_gc, root, gpio_spec, &flags); + if (ret < 0) + goto err1; + + ret += of_gc->gc.base; +err1: + of_node_put(gpio); +err0: + pr_debug("%s exited with status %d\n", __func__, ret); + return ret; +} + +void of_platform_reset_gpio_probe(void) +{ + int ret; + handle = of_reset_gpio_handle(); + + if (!gpio_is_valid(handle)) { + printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n", + handle, "reset"); + } + + ret = gpio_request(handle, "reset"); + if (ret < 0) { + printk(KERN_INFO "GPIO pin is already allocated\n"); + return; + } + + /* get current setup value */ + reset_val = gpio_get_value(handle); + /* FIXME maybe worth to perform any action */ + pr_debug("Reset: Gpio output state: 0x%x\n", reset_val); + + /* Setup GPIO as output */ + ret = gpio_direction_output(handle, 0); + if (ret < 0) + goto err; + + /* Setup output direction */ + gpio_set_value(handle, 0); + + printk(KERN_INFO "RESET: Registered gpio device: %d, current val: %d\n", + handle, reset_val); + return; +err: + gpio_free(handle); + return; +} + + +static void gpio_system_reset(void) +{ + gpio_set_value(handle, 1 - reset_val); +} +#else +#define gpio_system_reset() do {} while (0) +void of_platform_reset_gpio_probe(void) +{ + return; +} +#endif + +void machine_restart(char *cmd) +{ + printk(KERN_NOTICE "Machine restart...\n"); + gpio_system_reset(); + dump_stack(); + while (1) + ; +} + +void machine_shutdown(void) +{ + printk(KERN_NOTICE "Machine shutdown...\n"); + while (1) + ; +} + +void machine_halt(void) +{ + printk(KERN_NOTICE "Machine halt...\n"); + while (1) + ; +} + +void machine_power_off(void) +{ + printk(KERN_NOTICE "Machine power off...\n"); + while (1) + ; +} diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 8c1e0f4dcf18..5372b24ad049 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -52,13 +52,12 @@ void __init setup_arch(char **cmdline_p) /* irq_early_init(); */ setup_cpuinfo(); - __invalidate_icache_all(); - __enable_icache(); + microblaze_cache_init(); - __invalidate_dcache_all(); - __enable_dcache(); + enable_dcache(); - panic_timeout = 120; + invalidate_icache(); + enable_icache(); setup_memory(); @@ -131,6 +130,8 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE); #endif + lockdep_init(); + /* initialize device tree for usage in early_printk */ early_init_devtree((void *)_fdt_start); @@ -186,32 +187,3 @@ static int microblaze_debugfs_init(void) } arch_initcall(microblaze_debugfs_init); #endif - -void machine_restart(char *cmd) -{ - printk(KERN_NOTICE "Machine restart...\n"); - dump_stack(); - while (1) - ; -} - -void machine_shutdown(void) -{ - printk(KERN_NOTICE "Machine shutdown...\n"); - while (1) - ; -} - -void machine_halt(void) -{ - printk(KERN_NOTICE "Machine halt...\n"); - while (1) - ; -} - -void machine_power_off(void) -{ - printk(KERN_NOTICE "Machine power off...\n"); - while (1) - ; -} diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 1c80e4fc40ce..d8d3bb396cd6 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -44,7 +44,6 @@ asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset, int in_sycall); - asmlinkage long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct pt_regs *regs) @@ -176,6 +175,11 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, struct rt_sigframe __user *frame; int err = 0; int signal; + unsigned long address = 0; +#ifdef CONFIG_MMU + pmd_t *pmdp; + pte_t *ptep; +#endif frame = get_sigframe(ka, regs, sizeof(*frame)); @@ -216,8 +220,29 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, Negative 8 offset because return is rtsd r15, 8 */ regs->r15 = ((unsigned long)frame->tramp)-8; - __invalidate_cache_sigtramp((unsigned long)frame->tramp); - + address = ((unsigned long)frame->tramp); +#ifdef CONFIG_MMU + pmdp = pmd_offset(pud_offset( + pgd_offset(current->mm, address), + address), address); + + preempt_disable(); + ptep = pte_offset_map(pmdp, address); + if (pte_present(*ptep)) { + address = (unsigned long) page_address(pte_page(*ptep)); + /* MS: I need add offset in page */ + address += ((unsigned long)frame->tramp) & ~PAGE_MASK; + /* MS address is virtual */ + address = virt_to_phys(address); + invalidate_icache_range(address, address + 8); + flush_dcache_range(address, address + 8); + } + pte_unmap(ptep); + preempt_enable(); +#else + flush_icache_range(address, address + 8); + flush_dcache_range(address, address + 8); +#endif if (err) goto give_sigsegv; @@ -233,6 +258,10 @@ static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, set_fs(USER_DS); + /* the tracer may want to single-step inside the handler */ + if (test_thread_flag(TIF_SINGLESTEP)) + ptrace_notify(SIGTRAP); + #ifdef DEBUG_SIG printk(KERN_INFO "SIG deliver (%s:%d): sp=%p pc=%08lx\n", current->comm, current->pid, frame, regs->pc); diff --git a/arch/microblaze/kernel/stacktrace.c b/arch/microblaze/kernel/stacktrace.c new file mode 100644 index 000000000000..123692f22647 --- /dev/null +++ b/arch/microblaze/kernel/stacktrace.c @@ -0,0 +1,65 @@ +/* + * Stack trace support for Microblaze. + * + * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2009 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sched.h> +#include <linux/stacktrace.h> +#include <linux/thread_info.h> +#include <linux/ptrace.h> +#include <linux/module.h> + +/* FIXME initial support */ +void save_stack_trace(struct stack_trace *trace) +{ + unsigned long *sp; + unsigned long addr; + asm("addik %0, r1, 0" : "=r" (sp)); + + while (!kstack_end(sp)) { + addr = *sp++; + if (__kernel_text_address(addr)) { + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = addr; + + if (trace->nr_entries >= trace->max_entries) + break; + } + } +} +EXPORT_SYMBOL_GPL(save_stack_trace); + +void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace) +{ + unsigned int *sp; + unsigned long addr; + + struct thread_info *ti = task_thread_info(tsk); + + if (tsk == current) + asm("addik %0, r1, 0" : "=r" (sp)); + else + sp = (unsigned int *)ti->cpu_context.r1; + + while (!kstack_end(sp)) { + addr = *sp++; + if (__kernel_text_address(addr)) { + if (trace->skip > 0) + trace->skip--; + else + trace->entries[trace->nr_entries++] = addr; + + if (trace->nr_entries >= trace->max_entries) + break; + } + } +} +EXPORT_SYMBOL_GPL(save_stack_trace_tsk); diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c index 07cabed4b947..9f3c205fb75b 100644 --- a/arch/microblaze/kernel/sys_microblaze.c +++ b/arch/microblaze/kernel/sys_microblaze.c @@ -62,46 +62,14 @@ out: return error; } -asmlinkage long -sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - struct file *file = NULL; - int ret = -EBADF; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) { - printk(KERN_INFO "no fd in mmap\r\n"); - goto out; - } - } - - down_write(¤t->mm->mmap_sem); - ret = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); -out: - return ret; -} - asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, off_t pgoff) { - int err = -EINVAL; - - if (pgoff & ~PAGE_MASK) { - printk(KERN_INFO "no pagemask in mmap\r\n"); - goto out; - } + if (pgoff & ~PAGE_MASK) + return -EINVAL; - err = sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); -out: - return err; + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); } /* diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index c1ab1dc10898..4088be7d4e29 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -183,7 +183,7 @@ ENTRY(sys_call_table) .long sys_rt_sigpending .long sys_rt_sigtimedwait .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend_wrapper + .long sys_rt_sigsuspend .long sys_pread64 /* 180 */ .long sys_pwrite64 .long sys_chown @@ -196,7 +196,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* reserved for streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 /* mmap2 */ + .long sys_mmap_pgoff /* mmap2 */ .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ @@ -303,7 +303,7 @@ ENTRY(sys_call_table) .long sys_mkdirat .long sys_mknodat .long sys_fchownat - .long sys_ni_syscall + .long sys_futimesat .long sys_fstatat64 /* 300 */ .long sys_unlinkat .long sys_renameat diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 5499deae7fa6..ed61b2f17719 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -183,6 +183,31 @@ static cycle_t microblaze_read(struct clocksource *cs) return (cycle_t) (in_be32(TIMER_BASE + TCR1)); } +static struct timecounter microblaze_tc = { + .cc = NULL, +}; + +static cycle_t microblaze_cc_read(const struct cyclecounter *cc) +{ + return microblaze_read(NULL); +} + +static struct cyclecounter microblaze_cc = { + .read = microblaze_cc_read, + .mask = CLOCKSOURCE_MASK(32), + .shift = 24, +}; + +int __init init_microblaze_timecounter(void) +{ + microblaze_cc.mult = div_sc(cpuinfo.cpu_clock_freq, NSEC_PER_SEC, + microblaze_cc.shift); + + timecounter_init(µblaze_tc, µblaze_cc, sched_clock()); + + return 0; +} + static struct clocksource clocksource_microblaze = { .name = "microblaze_clocksource", .rating = 300, @@ -204,6 +229,9 @@ static int __init microblaze_clocksource_init(void) out_be32(TIMER_BASE + TCSR1, in_be32(TIMER_BASE + TCSR1) & ~TCSR_ENT); /* start timer1 - up counting without interrupt */ out_be32(TIMER_BASE + TCSR1, TCSR_TINT|TCSR_ENT|TCSR_ARHT); + + /* register timecounter - for ftrace support */ + init_microblaze_timecounter(); return 0; } diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index e704188d7855..5ef619aad634 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -26,11 +26,12 @@ SECTIONS { _stext = . ; *(.text .text.*) *(.fixup) - EXIT_TEXT - EXIT_CALL + EXIT_TEXT + EXIT_CALL SCHED_TEXT LOCK_TEXT KPROBES_TEXT + IRQENTRY_TEXT . = ALIGN (4) ; _etext = . ; } @@ -86,6 +87,7 @@ SECTIONS { _KERNEL_SDA_BASE_ = _ssro + (_ssro_size / 2) ; } + . = ALIGN(PAGE_SIZE); __init_begin = .; INIT_TEXT_SECTION(PAGE_SIZE) diff --git a/arch/microblaze/lib/uaccess.c b/arch/microblaze/lib/uaccess.c index 8eb9df5a26c9..a853fe089c44 100644 --- a/arch/microblaze/lib/uaccess.c +++ b/arch/microblaze/lib/uaccess.c @@ -39,3 +39,10 @@ long strncpy_from_user(char *dst, const char __user *src, long count) __do_strncpy_from_user(dst, src, count, res); return res; } + +unsigned long __copy_tofrom_user(void __user *to, + const void __user *from, unsigned long size) +{ + memcpy(to, from, size); + return 0; +} diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index a44892e7cd5b..a57cedf36715 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -41,6 +41,7 @@ char *klimit = _end; * have available. */ unsigned long memory_start; +EXPORT_SYMBOL(memory_start); unsigned long memory_end; /* due to mm/nommu.c */ unsigned long memory_size; diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index 46c4ca5d15c5..2820081b21ab 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -144,7 +144,6 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) pmd_t *pd; pte_t *pg; int err = -ENOMEM; - /* spin_lock(&init_mm.page_table_lock); */ /* Use upper 10 bits of VA to index the first level map */ pd = pmd_offset(pgd_offset_k(va), va); /* Use middle 10 bits of VA to index the second-level map */ @@ -158,9 +157,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) if (mem_init_done) flush_HPTE(0, va, pmd_val(*pd)); /* flush_HPTE(0, va, pg); */ - } - /* spin_unlock(&init_mm.page_table_lock); */ return err; } @@ -182,12 +179,6 @@ void __init adjust_total_lowmem(void) #endif } -static void show_tmem(unsigned long tmem) -{ - volatile unsigned long a; - a = a + tmem; -} - /* * Map in all of physical memory starting at CONFIG_KERNEL_START. */ @@ -197,7 +188,6 @@ void __init mapin_ram(void) v = CONFIG_KERNEL_START; p = memory_start; - show_tmem(memory_size); for (s = 0; s < memory_size; s += PAGE_SIZE) { f = _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_SHARED | _PAGE_HWEXEC; diff --git a/arch/microblaze/oprofile/Makefile b/arch/microblaze/oprofile/Makefile new file mode 100644 index 000000000000..0d0348c8af97 --- /dev/null +++ b/arch/microblaze/oprofile/Makefile @@ -0,0 +1,13 @@ +# +# arch/microblaze/oprofile/Makefile +# + +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) microblaze_oprofile.o diff --git a/arch/microblaze/oprofile/microblaze_oprofile.c b/arch/microblaze/oprofile/microblaze_oprofile.c new file mode 100644 index 000000000000..def17e59888e --- /dev/null +++ b/arch/microblaze/oprofile/microblaze_oprofile.c @@ -0,0 +1,22 @@ +/* + * Microblaze oprofile code + * + * Copyright (C) 2009 Michal Simek <monstr@monstr.eu> + * Copyright (C) 2009 PetaLogix + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> + +int __init oprofile_arch_init(struct oprofile_operations *ops) +{ + return -1; +} + +void oprofile_arch_exit(void) +{ +} diff --git a/arch/microblaze/platform/Kconfig.platform b/arch/microblaze/platform/Kconfig.platform index 8e9b4752d3ff..669c7eec293e 100644 --- a/arch/microblaze/platform/Kconfig.platform +++ b/arch/microblaze/platform/Kconfig.platform @@ -53,31 +53,12 @@ config OPT_LIB_FUNCTION config OPT_LIB_ASM bool "Optimalized lib function ASM" - depends on OPT_LIB_FUNCTION + depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1) default n help Allows turn on optimalized library function (memcpy and memmove). Function are written in asm code. -# This is still a bit broken - disabling for now JW 20070504 -config ALLOW_EDIT_AUTO - bool "Permit Display/edit of Kconfig.auto platform settings" - default n - help - Allows the editing of auto-generated platform settings from - the Kconfig.auto file. Obviously this does not change the - underlying hardware, so be very careful if you go editing - these settings. - - Also, if you enable this, and edit various Kconfig.auto - settings, YOUR CHANGES WILL BE LOST if you then disable it - again. You have been warned! - - If unsure, say no. - -comment "Automatic platform settings from Kconfig.auto" - depends on ALLOW_EDIT_AUTO - if PLATFORM_GENERIC=y source "arch/microblaze/platform/generic/Kconfig.auto" endif diff --git a/arch/microblaze/platform/generic/Kconfig.auto b/arch/microblaze/platform/generic/Kconfig.auto index fbca22d9c8b9..5d86fc19029d 100644 --- a/arch/microblaze/platform/generic/Kconfig.auto +++ b/arch/microblaze/platform/generic/Kconfig.auto @@ -21,7 +21,6 @@ # Definitions for MICROBLAZE0 comment "Definitions for MICROBLAZE0" - depends on ALLOW_EDIT_AUTO config KERNEL_BASE_ADDR hex "Physical address where Linux Kernel is" @@ -30,33 +29,33 @@ config KERNEL_BASE_ADDR BASE Address for kernel config XILINX_MICROBLAZE0_FAMILY - string "Targetted FPGA family" if ALLOW_EDIT_AUTO + string "Targetted FPGA family" default "virtex5" config XILINX_MICROBLAZE0_USE_MSR_INSTR - int "USE_MSR_INSTR range (0:1)" if ALLOW_EDIT_AUTO - default 1 + int "USE_MSR_INSTR range (0:1)" + default 0 config XILINX_MICROBLAZE0_USE_PCMP_INSTR - int "USE_PCMP_INSTR range (0:1)" if ALLOW_EDIT_AUTO - default 1 + int "USE_PCMP_INSTR range (0:1)" + default 0 config XILINX_MICROBLAZE0_USE_BARREL - int "USE_BARREL range (0:1)" if ALLOW_EDIT_AUTO - default 1 + int "USE_BARREL range (0:1)" + default 0 config XILINX_MICROBLAZE0_USE_DIV - int "USE_DIV range (0:1)" if ALLOW_EDIT_AUTO - default 1 + int "USE_DIV range (0:1)" + default 0 config XILINX_MICROBLAZE0_USE_HW_MUL - int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" if ALLOW_EDIT_AUTO - default 2 + int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" + default 0 config XILINX_MICROBLAZE0_USE_FPU - int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" if ALLOW_EDIT_AUTO - default 2 + int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" + default 0 config XILINX_MICROBLAZE0_HW_VER - string "Core version number" if ALLOW_EDIT_AUTO + string "Core version number" default 7.10.d diff --git a/arch/microblaze/platform/generic/system.dts b/arch/microblaze/platform/generic/system.dts index 29993f62b30a..2d5c41767cd0 100644 --- a/arch/microblaze/platform/generic/system.dts +++ b/arch/microblaze/platform/generic/system.dts @@ -32,11 +32,16 @@ #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,microblaze"; + hard-reset-gpios = <&LEDs_8Bit 2 1>; model = "testing"; DDR2_SDRAM: memory@90000000 { device_type = "memory"; reg = < 0x90000000 0x10000000 >; } ; + aliases { + ethernet0 = &Hard_Ethernet_MAC; + serial0 = &RS232_Uart_1; + } ; chosen { bootargs = "console=ttyUL0,115200 highres=on"; linux,stdout-path = "/plb@0/serial@84000000"; @@ -127,7 +132,7 @@ mb_plb: plb@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; + compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus"; ranges ; FLASH: flash@a0000000 { bank-width = <2>; @@ -214,12 +219,12 @@ #size-cells = <1>; compatible = "xlnx,compound"; ethernet@81c00000 { - compatible = "xlnx,xps-ll-temac-1.01.b"; + compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a"; device_type = "network"; interrupt-parent = <&xps_intc_0>; interrupts = < 5 2 >; llink-connected = <&PIM3>; - local-mac-address = [ 02 00 00 00 00 00 ]; + local-mac-address = [ 00 0a 35 00 00 00 ]; reg = < 0x81c00000 0x40 >; xlnx,bus2core-clk-ratio = <0x1>; xlnx,phy-type = <0x1>; @@ -261,6 +266,33 @@ xlnx,is-dual = <0x0>; xlnx,tri-default = <0xffffffff>; xlnx,tri-default-2 = <0xffffffff>; + #gpio-cells = <2>; + gpio-controller; + } ; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&LEDs_8Bit 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&LEDs_8Bit 5 1>; + }; + + red { + label = "Red"; + gpios = <&LEDs_8Bit 6 1>; + }; + + green { + label = "Green"; + gpios = <&LEDs_8Bit 7 1>; + }; } ; RS232_Uart_1: serial@84000000 { clock-frequency = <125000000>; diff --git a/arch/microblaze/platform/platform.c b/arch/microblaze/platform/platform.c index 56e0234fa34b..5b89b58c5aed 100644 --- a/arch/microblaze/platform/platform.c +++ b/arch/microblaze/platform/platform.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <asm/prom.h> +#include <asm/setup.h> static struct of_device_id xilinx_of_bus_ids[] __initdata = { { .compatible = "simple-bus", }, @@ -26,6 +27,7 @@ static struct of_device_id xilinx_of_bus_ids[] __initdata = { static int __init microblaze_device_probe(void) { of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL); + of_platform_reset_gpio_probe(); return 0; } device_initcall(microblaze_device_probe); diff --git a/arch/mips/include/asm/fcntl.h b/arch/mips/include/asm/fcntl.h index 2a52333a062d..7c6681aa2ab8 100644 --- a/arch/mips/include/asm/fcntl.h +++ b/arch/mips/include/asm/fcntl.h @@ -10,7 +10,7 @@ #define O_APPEND 0x0008 -#define O_SYNC 0x0010 +#define O_DSYNC 0x0010 /* used to be O_SYNC, see below */ #define O_NONBLOCK 0x0080 #define O_CREAT 0x0100 /* not fcntl */ #define O_TRUNC 0x0200 /* not fcntl */ @@ -18,6 +18,21 @@ #define O_NOCTTY 0x0800 /* not fcntl */ #define FASYNC 0x1000 /* fcntl, for BSD compatibility */ #define O_LARGEFILE 0x2000 /* allow large file opens */ +/* + * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * the O_SYNC flag. We continue to use the existing numerical value + * for O_DSYNC semantics now, but using the correct symbolic name for it. + * This new value is used to request true Posix O_SYNC semantics. It is + * defined in this strange way to make sure applications compiled against + * new headers get at least O_DSYNC semantics on older kernels. + * + * This has the nice side-effect that we can simply test for O_DSYNC + * wherever we do not care if O_DSYNC or O_SYNC is used. + * + * Note: __O_SYNC must never be used directly. + */ +#define __O_SYNC 0x4000 +#define O_SYNC (__O_SYNC|O_DSYNC) #define O_DIRECT 0x8000 /* direct disk access hint */ #define F_GETLK 14 diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index ad4e017ed2f3..80e2ba694bab 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -82,6 +82,7 @@ static int sp_stopping; #define MTSP_O_SHLOCK 0x0010 #define MTSP_O_EXLOCK 0x0020 #define MTSP_O_ASYNC 0x0040 +/* XXX: check which of these is actually O_SYNC vs O_DSYNC */ #define MTSP_O_FSYNC O_SYNC #define MTSP_O_NOFOLLOW 0x0100 #define MTSP_O_SYNC 0x0080 diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 1a2793efdc4e..f042563c924f 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -67,28 +67,13 @@ SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, pgoff) { - struct file * file = NULL; unsigned long error; error = -EINVAL; if (pgoff & (~PAGE_MASK >> 12)) goto out; - pgoff >>= PAGE_SHIFT-12; - - if (!(flags & MAP_ANONYMOUS)) { - error = -EBADF; - file = fget(fd); - if (!file) - goto out; - } - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); - + error = sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT-12)); out: return error; } diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index fe0d79805603..3f7f466190b4 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -93,7 +93,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, * We do not accept a shared mapping if it would violate * cache aliasing constraints. */ - if ((flags & MAP_SHARED) && (addr & shm_align_mask)) + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) return -EINVAL; return addr; } @@ -129,31 +130,6 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, } } -/* common code for old and new mmaps */ -static inline unsigned long -do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) -{ - unsigned long error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, off_t, offset) @@ -164,7 +140,7 @@ SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, if (offset & ~PAGE_MASK) goto out; - result = do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + result = sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); out: return result; @@ -177,7 +153,7 @@ SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len, if (pgoff & (~PAGE_MASK >> 12)) return -EINVAL; - return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12)); + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT-12)); } save_static_function(sys_fork); diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index 7c92f79b6480..e94ef158f980 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -26,7 +26,7 @@ void __init prom_init_memory(void) /* override of arch/mips/mm/cache.c: __uncached_access */ int __uncached_access(struct file *file, unsigned long addr) { - if (file->f_flags & O_SYNC) + if (file->f_flags & O_DSYNC) return 1; return addr >= __pa(high_memory) || diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 694d51f523d1..102b2dfa542a 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -194,7 +194,7 @@ void __devinit cpu_cache_init(void) int __weak __uncached_access(struct file *file, unsigned long addr) { - if (file->f_flags & O_SYNC) + if (file->f_flags & O_DSYNC) return 1; return addr >= __pa(high_memory); diff --git a/arch/mn10300/include/asm/mman.h b/arch/mn10300/include/asm/mman.h index 8eebf89f5ab1..db5c53da73ce 100644 --- a/arch/mn10300/include/asm/mman.h +++ b/arch/mn10300/include/asm/mman.h @@ -1 +1,6 @@ #include <asm-generic/mman.h> + +#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */ + +#define arch_mmap_check(addr, len, flags) \ + (((flags) & MAP_FIXED && (addr) < MIN_MAP_ADDR) ? -EINVAL : 0) diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index a94e7ea3faa6..c9ee6c009d79 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -578,7 +578,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* reserved for streams2 */ .long sys_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap_pgoff .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/mn10300/kernel/kprobes.c b/arch/mn10300/kernel/kprobes.c index dacafab00eb2..67e6389d625a 100644 --- a/arch/mn10300/kernel/kprobes.c +++ b/arch/mn10300/kernel/kprobes.c @@ -31,13 +31,13 @@ const int kretprobe_blacklist_size = ARRAY_SIZE(kretprobe_blacklist); #define KPROBE_HIT_ACTIVE 0x00000001 #define KPROBE_HIT_SS 0x00000002 -static struct kprobe *current_kprobe; -static unsigned long current_kprobe_orig_pc; -static unsigned long current_kprobe_next_pc; -static int current_kprobe_ss_flags; +static struct kprobe *cur_kprobe; +static unsigned long cur_kprobe_orig_pc; +static unsigned long cur_kprobe_next_pc; +static int cur_kprobe_ss_flags; static unsigned long kprobe_status; -static kprobe_opcode_t current_kprobe_ss_buf[MAX_INSN_SIZE + 2]; -static unsigned long current_kprobe_bp_addr; +static kprobe_opcode_t cur_kprobe_ss_buf[MAX_INSN_SIZE + 2]; +static unsigned long cur_kprobe_bp_addr; DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL; @@ -399,26 +399,25 @@ void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) { unsigned long nextpc; - current_kprobe_orig_pc = regs->pc; - memcpy(current_kprobe_ss_buf, &p->ainsn.insn[0], MAX_INSN_SIZE); - regs->pc = (unsigned long) current_kprobe_ss_buf; + cur_kprobe_orig_pc = regs->pc; + memcpy(cur_kprobe_ss_buf, &p->ainsn.insn[0], MAX_INSN_SIZE); + regs->pc = (unsigned long) cur_kprobe_ss_buf; - nextpc = find_nextpc(regs, ¤t_kprobe_ss_flags); - if (current_kprobe_ss_flags & SINGLESTEP_PCREL) - current_kprobe_next_pc = - current_kprobe_orig_pc + (nextpc - regs->pc); + nextpc = find_nextpc(regs, &cur_kprobe_ss_flags); + if (cur_kprobe_ss_flags & SINGLESTEP_PCREL) + cur_kprobe_next_pc = cur_kprobe_orig_pc + (nextpc - regs->pc); else - current_kprobe_next_pc = nextpc; + cur_kprobe_next_pc = nextpc; /* branching instructions need special handling */ - if (current_kprobe_ss_flags & SINGLESTEP_BRANCH) + if (cur_kprobe_ss_flags & SINGLESTEP_BRANCH) nextpc = singlestep_branch_setup(regs); - current_kprobe_bp_addr = nextpc; + cur_kprobe_bp_addr = nextpc; *(u8 *) nextpc = BREAKPOINT_INSTRUCTION; - mn10300_dcache_flush_range2((unsigned) current_kprobe_ss_buf, - sizeof(current_kprobe_ss_buf)); + mn10300_dcache_flush_range2((unsigned) cur_kprobe_ss_buf, + sizeof(cur_kprobe_ss_buf)); mn10300_icache_inv(); } @@ -440,7 +439,7 @@ static inline int __kprobes kprobe_handler(struct pt_regs *regs) disarm_kprobe(p, regs); ret = 1; } else { - p = current_kprobe; + p = cur_kprobe; if (p->break_handler && p->break_handler(p, regs)) goto ss_probe; } @@ -464,7 +463,7 @@ static inline int __kprobes kprobe_handler(struct pt_regs *regs) } kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; + cur_kprobe = p; if (p->pre_handler(p, regs)) { /* handler has already set things up, so skip ss setup */ return 1; @@ -491,8 +490,8 @@ no_kprobe: static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) { /* we may need to fixup regs/stack after singlestepping a call insn */ - if (current_kprobe_ss_flags & SINGLESTEP_BRANCH) { - regs->pc = current_kprobe_orig_pc; + if (cur_kprobe_ss_flags & SINGLESTEP_BRANCH) { + regs->pc = cur_kprobe_orig_pc; switch (p->ainsn.insn[0]) { case 0xcd: /* CALL (d16,PC) */ *(unsigned *) regs->sp = regs->mdr = regs->pc + 5; @@ -523,8 +522,8 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) } } - regs->pc = current_kprobe_next_pc; - current_kprobe_bp_addr = 0; + regs->pc = cur_kprobe_next_pc; + cur_kprobe_bp_addr = 0; } static inline int __kprobes post_kprobe_handler(struct pt_regs *regs) @@ -532,10 +531,10 @@ static inline int __kprobes post_kprobe_handler(struct pt_regs *regs) if (!kprobe_running()) return 0; - if (current_kprobe->post_handler) - current_kprobe->post_handler(current_kprobe, regs, 0); + if (cur_kprobe->post_handler) + cur_kprobe->post_handler(cur_kprobe, regs, 0); - resume_execution(current_kprobe, regs); + resume_execution(cur_kprobe, regs); reset_current_kprobe(); preempt_enable_no_resched(); return 1; @@ -545,12 +544,12 @@ static inline int __kprobes post_kprobe_handler(struct pt_regs *regs) static inline int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr) { - if (current_kprobe->fault_handler && - current_kprobe->fault_handler(current_kprobe, regs, trapnr)) + if (cur_kprobe->fault_handler && + cur_kprobe->fault_handler(cur_kprobe, regs, trapnr)) return 1; if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); + resume_execution(cur_kprobe, regs); reset_current_kprobe(); preempt_enable_no_resched(); } @@ -567,7 +566,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self, switch (val) { case DIE_BREAKPOINT: - if (current_kprobe_bp_addr != args->regs->pc) { + if (cur_kprobe_bp_addr != args->regs->pc) { if (kprobe_handler(args->regs)) return NOTIFY_STOP; } else { diff --git a/arch/mn10300/kernel/sys_mn10300.c b/arch/mn10300/kernel/sys_mn10300.c index 8ca5af00334c..17cc6ce04e84 100644 --- a/arch/mn10300/kernel/sys_mn10300.c +++ b/arch/mn10300/kernel/sys_mn10300.c @@ -23,47 +23,13 @@ #include <asm/uaccess.h> -#define MIN_MAP_ADDR PAGE_SIZE /* minimum fixed mmap address */ - -/* - * memory mapping syscall - */ -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - struct file *file = NULL; - long error = -EINVAL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - if (flags & MAP_FIXED && addr < MIN_MAP_ADDR) - goto out; - - error = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage long old_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long offset) { if (offset & ~PAGE_MASK) return -EINVAL; - return sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); } struct sel_arg_struct { diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h index 1e1c824764ee..f357fc693c89 100644 --- a/arch/parisc/include/asm/fcntl.h +++ b/arch/parisc/include/asm/fcntl.h @@ -1,14 +1,13 @@ #ifndef _PARISC_FCNTL_H #define _PARISC_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ #define O_APPEND 000000010 #define O_BLKSEEK 000000100 /* HPUX only */ #define O_CREAT 000000400 /* not fcntl */ #define O_EXCL 000002000 /* not fcntl */ #define O_LARGEFILE 000004000 -#define O_SYNC 000100000 +#define __O_SYNC 000100000 +#define O_SYNC (__O_SYNC|O_DSYNC) #define O_NONBLOCK 000200004 /* HPUX has separate NDELAY & NONBLOCK */ #define O_NOCTTY 000400000 /* not fcntl */ #define O_DSYNC 001000000 /* HPUX only */ diff --git a/arch/parisc/kernel/sys_parisc.c b/arch/parisc/kernel/sys_parisc.c index 71b31957c8f1..9147391afb03 100644 --- a/arch/parisc/kernel/sys_parisc.c +++ b/arch/parisc/kernel/sys_parisc.c @@ -110,37 +110,14 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, return addr; } -static unsigned long do_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, unsigned long fd, - unsigned long pgoff) -{ - struct file * file = NULL; - unsigned long error = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file != NULL) - fput(file); -out: - return error; -} - asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { /* Make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE we have. */ - return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT - 12)); + return sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); } asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, @@ -148,7 +125,8 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, unsigned long offset) { if (!(offset & ~PAGE_MASK)) { - return do_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + return sys_mmap_pgoff(addr, len, prot, flags, fd, + offset >> PAGE_SHIFT); } else { return -EINVAL; } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2ba14e77296c..0df57466e783 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -56,6 +56,16 @@ config IRQ_PER_CPU bool default y +config NR_IRQS + int "Number of virtual interrupt numbers" + range 32 512 + default "512" + help + This defines the number of virtual interrupt numbers the kernel + can manage. Virtual interrupt numbers are what you see in + /proc/interrupts. If you configure your system to have too few, + drivers will fail to load or worse - handle with care. + config STACKTRACE_SUPPORT bool default y @@ -199,24 +209,14 @@ config DEFAULT_UIMAGE config REDBOOT bool -config HIBERNATE_32 - bool - depends on (PPC_PMAC && !SMP) || BROKEN - default y - -config HIBERNATE_64 - bool - depends on BROKEN || (PPC_PMAC64 && EXPERIMENTAL) - default y - config ARCH_HIBERNATION_POSSIBLE bool - depends on (PPC64 && HIBERNATE_64) || (PPC32 && HIBERNATE_32) default y config ARCH_SUSPEND_POSSIBLE def_bool y - depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx + depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \ + PPC_85xx || PPC_86xx config PPC_DCR_NATIVE bool @@ -320,6 +320,10 @@ config HOTPLUG_CPU Say N if you are unsure. +config ARCH_CPU_PROBE_RELEASE + def_bool y + depends on HOTPLUG_CPU + config ARCH_ENABLE_MEMORY_HOTPLUG def_bool y @@ -378,6 +382,19 @@ config IRQ_ALL_CPUS CPU. Generally saying Y is safe, although some problems have been reported with SMP Power Macintoshes with this option enabled. +config SPARSE_IRQ + bool "Support sparse irq numbering" + default y + help + This enables support for sparse irqs. This is useful for distro + kernels that want to define a high CONFIG_NR_CPUS value but still + want to have low kernel memory footprint on smaller machines. + + ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread + out the irq_desc[] array in a more NUMA-friendly way. ) + + If you don't know what to do here, say Y. + config NUMA bool "NUMA support" depends on PPC64 @@ -652,6 +669,14 @@ config FSL_PCI select PPC_INDIRECT_PCI select PCI_QUIRKS +config FSL_PMC + bool + default y + depends on SUSPEND && (PPC_85xx || PPC_86xx) + help + Freescale MPC85xx/MPC86xx power management controller support + (suspend/resume). For MPC83xx see platforms/83xx/suspend.c + config 4xx_SOC bool diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index c920170b7dfe..cd56bb5b347b 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -352,6 +352,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; @@ -381,6 +382,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts index c4a934f2e886..48bcf7187924 100644 --- a/arch/powerpc/boot/dts/eiger.dts +++ b/arch/powerpc/boot/dts/eiger.dts @@ -316,6 +316,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; @@ -345,6 +346,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; @@ -375,6 +377,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII1>; @@ -403,6 +407,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII1>; diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index 910944edd886..c86114e93f1e 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -118,6 +118,12 @@ }; }; + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + fpga@4,0 { compatible = "gef,ppc9a-fpga-regs"; reg = <0x4 0x0 0x40>; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 2107d3c7cfe1..820c2b355ab1 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -115,6 +115,12 @@ }; }; + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + fpga@4,0 { compatible = "gef,fpga-regs"; reg = <0x4 0x0 0x40>; diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 35a63183eecc..30911adefc8e 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -84,6 +84,12 @@ 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + fpga@4,0 { compatible = "gef,fpga-regs"; reg = <0x4 0x0 0x40>; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index f3787a27f634..f6f618939293 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -292,6 +292,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; @@ -321,6 +322,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; @@ -351,6 +353,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII1>; @@ -379,6 +383,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII1>; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index 5b2a4947bf82..2b256694eca6 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -226,6 +226,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 077819bc3cbd..51eb6ed5da2d 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -16,7 +16,7 @@ / { #address-cells = <2>; - #size-cells = <1>; + #size-cells = <2>; model = "amcc,katmai"; compatible = "amcc,katmai"; dcr-parent = <&{/cpus/cpu@0}>; @@ -49,7 +49,7 @@ memory { device_type = "memory"; - reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ }; UIC0: interrupt-controller0 { @@ -112,7 +112,15 @@ compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; #address-cells = <2>; #size-cells = <1>; - ranges; + /* addr-child addr-parent size */ + ranges = <0x4 0xe0000000 0x4 0xe0000000 0x20000000 + 0xc 0x00000000 0xc 0x00000000 0x20000000 + 0xd 0x00000000 0xd 0x00000000 0x80000000 + 0xd 0x80000000 0xd 0x80000000 0x80000000 + 0xe 0x00000000 0xe 0x00000000 0x80000000 + 0xe 0x80000000 0xe 0x80000000 0x80000000 + 0xf 0x00000000 0xf 0x00000000 0x80000000 + 0xf 0x80000000 0xf 0x80000000 0x80000000>; clock-frequency = <0>; /* Filled in by zImage */ SDRAM0: sdram { @@ -245,8 +253,8 @@ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; /* This drives busses 0 to 0xf */ bus-range = <0x0 0xf>; @@ -289,10 +297,10 @@ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; - /* This drives busses 10 to 0x1f */ + /* This drives busses 0x10 to 0x1f */ bus-range = <0x10 0x1f>; /* Legacy interrupts (note the weird polarity, the bridge seems @@ -330,10 +338,10 @@ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; - /* This drives busses 10 to 0x1f */ + /* This drives busses 0x20 to 0x2f */ bus-range = <0x20 0x2f>; /* Legacy interrupts (note the weird polarity, the bridge seems @@ -371,10 +379,10 @@ ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; - /* This drives busses 10 to 0x1f */ + /* This drives busses 0x30 to 0x3f */ bus-range = <0x30 0x3f>; /* Legacy interrupts (note the weird polarity, the bridge seems diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index c46561456ede..083e68eeaca4 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -272,6 +272,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; @@ -300,6 +302,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts index 167044f7de1d..65b8b4f27efe 100644 --- a/arch/powerpc/boot/dts/kmeter1.dts +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -59,6 +59,13 @@ reg = <0xe0000000 0x00000200>; bus-frequency = <0>; /* Filled in by U-Boot */ + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index ffc246e72670..63d48b632c84 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -227,6 +227,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x0000003f>; /* Start at 6 */ rgmii-device = <&RGMII0>; @@ -255,6 +257,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 436c9c671dd9..05ad8c98e527 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -79,6 +79,13 @@ reg = <0x200 0x100>; }; + pmc: power@b00 { + compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -163,6 +170,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x4c>; fsl,descriptor-types-mask = <0x0122003f>; + sleep = <&pmc 0x03000000>; }; ipic: pic@700 { @@ -428,5 +436,6 @@ 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; + sleep = <&pmc 0x00010000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts index 9a0952f74b81..f4fadb23ad6f 100644 --- a/arch/powerpc/boot/dts/mpc832x_rdb.dts +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -62,6 +62,13 @@ reg = <0x200 0x100>; }; + pmc: power@b00 { + compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -141,6 +148,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x4c>; fsl,descriptor-types-mask = <0x0122003f>; + sleep = <&pmc 0x03000000>; }; ipic:pic@700 { @@ -360,5 +368,6 @@ 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; + sleep = <&pmc 0x00010000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 39ff4c829caf..45cfa1c50a2a 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -99,6 +99,13 @@ reg = <0x200 0x100>; }; + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -194,6 +201,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x7e>; fsl,descriptor-types-mask = <0x01010ebf>; + sleep = <&pmc 0x03000000>; }; ipic: pic@700 { @@ -470,5 +478,6 @@ 0xe0008300 0x8>; /* config space access registers */ compatible = "fsl,mpc8349-pci"; device_type = "pci"; + sleep = <&pmc 0x00010000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts index 6315d6fcc58a..bdf4459677b1 100644 --- a/arch/powerpc/boot/dts/mpc836x_rdk.dts +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -71,6 +71,13 @@ reg = <0x200 0x100>; }; + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -161,6 +168,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0x7e>; fsl,descriptor-types-mask = <0x01010ebf>; + sleep = <&pmc 0x03000000>; }; ipic: interrupt-controller@700 { @@ -455,6 +463,7 @@ 0xa800 0 0 2 &ipic 20 8 0xa800 0 0 3 &ipic 21 8 0xa800 0 0 4 &ipic 18 8>; + sleep = <&pmc 0x00010000>; /* filled by u-boot */ bus-range = <0 0>; clock-frequency = <0>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 00c2bbda7013..6d892ba74e55 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -40,6 +40,8 @@ i-cache-line-size = <32>; // 32 bytes d-cache-size = <0x8000>; // L1, 32K i-cache-size = <0x8000>; // L1, 32K + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -94,31 +96,41 @@ interrupts = <16 2>; }; - i2c@3000 { + i2c-sleep-nexus { #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <3 1>; + interrupt-parent = <&mpic>; + }; }; - }; - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; }; dma@21300 { @@ -128,6 +140,8 @@ reg = <0x21300 0x4>; ranges = <0x0 0x21100 0x200>; cell-index = <0>; + sleep = <&pmc 0x00000400>; + dma-channel@0 { compatible = "fsl,mpc8568-dma-channel", "fsl,eloplus-dma-channel"; @@ -176,6 +190,7 @@ interrupt-parent = <&mpic>; tbi-handle = <&tbi0>; phy-handle = <&phy2>; + sleep = <&pmc 0x00000080>; mdio@520 { #address-cells = <1>; @@ -228,6 +243,7 @@ interrupt-parent = <&mpic>; tbi-handle = <&tbi1>; phy-handle = <&phy3>; + sleep = <&pmc 0x00000040>; mdio@520 { #address-cells = <1>; @@ -242,30 +258,47 @@ }; }; - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; }; - global-utilities@e0000 { //global utilities block - compatible = "fsl,mpc8548-guts"; + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; fsl,has-rstcr; - }; - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; + pmc: power@70 { + compatible = "fsl,mpc8568-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; }; crypto@30000 { @@ -277,6 +310,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0xfe>; fsl,descriptor-types-mask = <0x12b0ebf>; + sleep = <&pmc 0x01000000>; }; mpic: pic@40000 { @@ -376,6 +410,7 @@ compatible = "fsl,qe"; ranges = <0x0 0xe0080000 0x40000>; reg = <0xe0080000 0x480>; + sleep = <&pmc 0x00000800>; brg-frequency = <0>; bus-frequency = <396000000>; fsl,qe-num-riscs = <2>; @@ -509,6 +544,7 @@ bus-range = <0 255>; ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>; + sleep = <&pmc 0x80000000>; clock-frequency = <66666666>; #interrupt-cells = <1>; #size-cells = <2>; @@ -534,6 +570,7 @@ bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>; + sleep = <&pmc 0x20000000>; clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; @@ -570,5 +607,7 @@ 55 2 /* msg2_tx */ 56 2 /* msg2_rx */>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00080000 /* controller */ + &pmc 0x00040000>; /* message unit */ }; }; diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 1e3ec8f059bf..795eb362fcf9 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -41,6 +41,8 @@ i-cache-line-size = <32>; // 32 bytes d-cache-size = <0x8000>; // L1, 32K i-cache-size = <0x8000>; // L1, 32K + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; @@ -59,6 +61,7 @@ reg = <0xe0005000 0x1000>; interrupts = <19 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x08000000>; ranges = <0x0 0x0 0xfe000000 0x02000000 0x1 0x0 0xf8000000 0x00008000 @@ -158,51 +161,69 @@ interrupts = <18 2>; }; - i2c@3000 { + i2c-sleep-nexus { #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <3 1>; + interrupt-parent = <&mpic>; + }; + }; - rtc@68 { - compatible = "dallas,ds1374"; - reg = <0x68>; + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; }; }; - i2c@3100 { + duart-sleep-nexus { #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; }; L2: l2-cache-controller@20000 { @@ -260,6 +281,7 @@ reg = <0x2e000 0x1000>; interrupts = <72 0x8>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00200000>; /* Filled in by U-Boot */ clock-frequency = <0>; status = "disabled"; @@ -276,6 +298,7 @@ fsl,channel-fifo-len = <24>; fsl,exec-units-mask = <0xbfe>; fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x01000000>; }; mpic: pic@40000 { @@ -304,9 +327,18 @@ }; global-utilities@e0000 { - compatible = "fsl,mpc8569-guts"; + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts"; reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8569-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; }; par_io@e0100 { @@ -422,6 +454,7 @@ compatible = "fsl,qe"; ranges = <0x0 0xe0080000 0x40000>; reg = <0xe0080000 0x480>; + sleep = <&pmc 0x00000800>; brg-frequency = <0>; bus-frequency = <0>; fsl,qe-num-riscs = <4>; @@ -684,6 +717,7 @@ bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>; + sleep = <&pmc 0x20000000>; clock-frequency = <33333333>; pcie@0 { reg = <0x0 0x0 0x0 0x0 0x0>; @@ -714,5 +748,6 @@ 55 2 /* msg2_tx */ 56 2 /* msg2_rx */>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00080000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index f468d215f716..9535ce68caae 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -35,6 +35,8 @@ i-cache-line-size = <32>; d-cache-size = <32768>; // L1 i-cache-size = <32768>; // L1 + sleep = <&pmc 0x00008000 0 // core + &pmc 0x00004000 0>; // timebase timebase-frequency = <0>; // From uboot bus-frequency = <0>; // From uboot clock-frequency = <0>; // From uboot @@ -60,6 +62,7 @@ 5 0 0xe8480000 0x00008000 6 0 0xe84c0000 0x00008000 3 0 0xe8000000 0x00000020>; + sleep = <&pmc 0x08000000 0>; flash@0,0 { compatible = "cfi-flash"; @@ -105,6 +108,8 @@ compatible = "fsl,fpga-pixis"; reg = <3 0 0x20>; ranges = <0 3 0 0x20>; + interrupt-parent = <&mpic>; + interrupts = <8 8>; sdcsr_pio: gpio-controller@a { #gpio-cells = <2>; @@ -163,6 +168,7 @@ reg = <0x3100 0x100>; interrupts = <43 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000004 0>; dfsrr; }; @@ -174,6 +180,7 @@ clock-frequency = <0>; interrupts = <42 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000002 0>; }; serial1: serial@4600 { @@ -184,6 +191,7 @@ clock-frequency = <0>; interrupts = <42 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000008 0>; }; spi@7000 { @@ -196,6 +204,7 @@ interrupt-parent = <&mpic>; mode = "cpu"; gpios = <&sdcsr_pio 7 0>; + sleep = <&pmc 0x00000800 0>; mmc-slot@0 { compatible = "fsl,mpc8610hpcd-mmc-slot", @@ -213,6 +222,7 @@ reg = <0x2c000 100>; interrupts = <72 2>; interrupt-parent = <&mpic>; + sleep = <&pmc 0x04000000 0>; }; mpic: interrupt-controller@40000 { @@ -241,9 +251,18 @@ }; global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "fsl,mpc8610-guts"; reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8610-pmc", + "fsl,mpc8641d-pmc"; + reg = <0x70 0x20>; + }; }; wdt@e4000 { @@ -262,6 +281,7 @@ fsl,playback-dma = <&dma00>; fsl,capture-dma = <&dma01>; fsl,fifo-depth = <8>; + sleep = <&pmc 0 0x08000000>; }; ssi@16100 { @@ -271,6 +291,7 @@ interrupt-parent = <&mpic>; interrupts = <63 2>; fsl,fifo-depth = <8>; + sleep = <&pmc 0 0x04000000>; }; dma@21300 { @@ -280,6 +301,7 @@ cell-index = <0>; reg = <0x21300 0x4>; /* DMA general status register */ ranges = <0x0 0x21100 0x200>; + sleep = <&pmc 0x00000400 0>; dma00: dma-channel@0 { compatible = "fsl,mpc8610-dma-channel", @@ -322,6 +344,7 @@ cell-index = <1>; reg = <0xc300 0x4>; /* DMA general status register */ ranges = <0x0 0xc100 0x200>; + sleep = <&pmc 0x00000200 0>; dma-channel@0 { compatible = "fsl,mpc8610-dma-channel", @@ -369,6 +392,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>; + sleep = <&pmc 0x80000000 0>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <24 2>; @@ -398,6 +422,7 @@ bus-range = <1 3>; ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + sleep = <&pmc 0x40000000 0>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <26 2>; @@ -474,6 +499,7 @@ 0x0000 0 0 4 &mpic 7 1>; interrupt-parent = <&mpic>; interrupts = <25 2>; + sleep = <&pmc 0x20000000 0>; clock-frequency = <33333333>; }; }; diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts new file mode 100644 index 000000000000..df5269093af8 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb.dts @@ -0,0 +1,477 @@ +/* + * P1020 RDB Device Tree Source + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "fsl,P1020"; + compatible = "fsl,P1020RDB"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xffe05000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + }; + + soc@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1020-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p1020-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + modal = "s25sl128b"; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI (RO) DTB Image"; + read-only; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI (RO) Linux Kernel Image"; + read-only; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI (RO) Compressed RFS Image"; + read-only; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI (RW) JFFS2 RFS"; + }; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + usb@23000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <46 0x2>; + phy_type = "ulpi"; + }; + + sdhci@2e000 { + compatible = "fsl,p1020-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", + "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,p1020-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,p1020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts new file mode 100644 index 000000000000..0fe93d0c8b2e --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts @@ -0,0 +1,363 @@ +/* + * P2020 RDB Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, spi, gpio, dma1, usb, + * eth1, eth2, sdhc, crypto, global-util, pci0. + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "fsl,P2020"; + compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + soc@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + }; + + spi@7000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + modal = "s25sl128b"; + spi-max-frequency = <50000000>; + mode = <0>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI (RO) DTB Image"; + read-only; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI (RO) Linux Kernel Image"; + read-only; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI (RO) Compressed RFS Image"; + read-only; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI (RW) JFFS2 RFS"; + }; + }; + }; + + gpio: gpio-controller@f000 { + #gpio-cells = <2>; + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x100>; + interrupts = <47 0x2>; + interrupt-parent = <&mpic>; + gpio-controller; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + usb@22000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <28 0x2>; + phy_type = "ulpi"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x1>; + }; + }; + + mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + sdhci@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2>; + interrupt-parent = <&mpic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4", + "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + protected-sources = < + 42 76 77 78 79 /* serial1 , dma2 */ + 29 30 34 26 /* enet0, pci1 */ + 0xe0 0xe1 0xe2 0xe3 /* msi */ + 0xe4 0xe5 0xe6 0xe7 + >; + }; + + global-utilities@e0000 { + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@ffe09000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe09000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts new file mode 100644 index 000000000000..e95a51285328 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts @@ -0,0 +1,184 @@ +/* + * P2020 RDB Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, dma2, eth0, pci1, msi. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "fsl,P2020"; + compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + serial0 = &serial0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + }; + + soc@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + serial0: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupt-parent = <&mpic>; + }; + + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + protected-sources = < + 17 18 43 42 59 47 /*ecm, mem, i2c, serial0, spi,gpio */ + 16 20 21 22 23 28 /* L2, dma1, USB */ + 03 35 36 40 31 32 33 /* mdio, enet1, enet2 */ + 72 45 58 25 /* sdhci, crypto , pci */ + >; + }; + + msi@41600 { + compatible = "fsl,p2020-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + }; + + pci1: pcie@ffe0a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xffe0a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts new file mode 100644 index 000000000000..6b29eab05362 --- /dev/null +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -0,0 +1,554 @@ +/* + * P4080DS Device Tree Source + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,P4080DS"; + compatible = "fsl,P4080DS"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ccsr = &soc; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + + rio0 = &rapidio0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,4080@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + }; + }; + cpu1: PowerPC,4080@1 { + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + }; + }; + cpu2: PowerPC,4080@2 { + device_type = "cpu"; + reg = <2>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + }; + }; + cpu3: PowerPC,4080@3 { + device_type = "cpu"; + reg = <3>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + }; + }; + cpu4: PowerPC,4080@4 { + device_type = "cpu"; + reg = <4>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + }; + }; + cpu5: PowerPC,4080@5 { + device_type = "cpu"; + reg = <5>; + next-level-cache = <&L2_5>; + L2_5: l2-cache { + }; + }; + cpu6: PowerPC,4080@6 { + device_type = "cpu"; + reg = <6>; + next-level-cache = <&L2_6>; + L2_6: l2-cache { + }; + }; + cpu7: PowerPC,4080@7 { + device_type = "cpu"; + reg = <7>; + next-level-cache = <&L2_7>; + L2_7: l2-cache { + }; + }; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + memory-controller@8000 { + compatible = "fsl,p4080-memory-controller"; + reg = <0x8000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 2>; + }; + + memory-controller@9000 { + compatible = "fsl,p4080-memory-controller"; + reg = <0x9000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 2>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,p4080-pamu"; + reg = <0x20000 0x10000>; + interrupts = <24 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <28 2>; + }; + dma-channel@80 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <29 2>; + }; + dma-channel@100 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <30 2>; + }; + dma-channel@180 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <31 2>; + }; + }; + + dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p4080-dma", "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <32 2>; + }; + dma-channel@80 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <33 2>; + }; + dma-channel@100 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <34 2>; + }; + dma-channel@180 { + compatible = "fsl,p4080-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <35 2>; + }; + }; + + spi@110000 { + cell-index = <0>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2>; + interrupt-parent = <&mpic>; + espi,num-ss-bits = <4>; + mode = "cpu"; + + fsl_m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,espi-flash"; + reg = <0>; + linux,modalias = "fsl_m25p80"; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + sdhc: sdhc@114000 { + compatible = "fsl,p4080-esdhc", "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2>; + interrupt-parent = <&mpic>; + }; + + i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2>; + interrupt-parent = <&mpic>; + dfsrr; + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0 0x1>; + interrupt-parent = <&mpic>; + }; + }; + + i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2>; + interrupt-parent = <&mpic>; + }; + + serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2>; + interrupt-parent = <&mpic>; + }; + + serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2>; + interrupt-parent = <&mpic>; + }; + + gpio0: gpio@130000 { + compatible = "fsl,p4080-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + usb0: usb@210000 { + compatible = "fsl,p4080-usb2-mph", + "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <44 0x2>; + phy_type = "ulpi"; + }; + + usb1: usb@211000 { + compatible = "fsl,p4080-usb2-dr", + "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&mpic>; + interrupts = <45 0x2>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + }; + + rapidio0: rapidio@ffe0c0000 { + #address-cells = <2>; + #size-cells = <2>; + compatible = "fsl,rapidio-delta"; + reg = <0xf 0xfe0c0000 0 0x20000>; + ranges = <0 0 0xf 0xf5000000 0 0x01000000>; + interrupt-parent = <&mpic>; + /* err_irq bell_outb_irq bell_inb_irq + msg1_tx_irq msg1_rx_irq msg2_tx_irq msg2_rx_irq */ + interrupts = <16 2 56 2 57 2 60 2 61 2 62 2 63 2>; + }; + + localbus@ffe124000 { + compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; + reg = <0xf 0xfe124000 0 0x1000>; + interrupts = <25 2>; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xf 0xe8000000 0x08000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + pci0: pcie@ffe200000 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe200000 0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + clock-frequency = <0x1fca055>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 + 0000 0 0 2 &mpic 1 1 + 0000 0 0 3 &mpic 2 1 + 0000 0 0 4 &mpic 3 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe201000 0 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + clock-frequency = <0x1fca055>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 + 0000 0 0 2 &mpic 5 1 + 0000 0 0 3 &mpic 6 1 + 0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + compatible = "fsl,p4080-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf 0xfe202000 0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + clock-frequency = <0x1fca055>; + interrupt-parent = <&mpic>; + interrupts = <16 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 + 0000 0 0 2 &mpic 9 1 + 0000 0 0 3 &mpic 10 1 + 0000 0 0 4 &mpic 11 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + +}; diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts index ad402c488741..d2af32e2bf7a 100644 --- a/arch/powerpc/boot/dts/redwood.dts +++ b/arch/powerpc/boot/dts/redwood.dts @@ -226,6 +226,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "rgmii"; phy-map = <0x00000000>; rgmii-device = <&RGMII0>; diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts index 1fa3cb4c4ebb..64923245f0e5 100644 --- a/arch/powerpc/boot/dts/yosemite.dts +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -282,20 +282,10 @@ /* Inbound 2GB range starting at 0 */ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; - /* Bamboo has all 4 IRQ pins tied together per slot */ interrupt-map-mask = <0xf800 0x0 0x0 0x0>; interrupt-map = < - /* IDSEL 1 */ - 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 - - /* IDSEL 2 */ - 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8 - - /* IDSEL 3 */ - 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8 - - /* IDSEL 4 */ - 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8 + /* IDSEL 12 */ + 0x6000 0x0 0x0 0x0 &UIC0 0x19 0x8 >; }; }; diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index 28980738776c..6cd2cd65c2cd 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -218,7 +218,7 @@ CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set +CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index e199d1cacbaf..a6a3768f7304 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -218,7 +218,7 @@ CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set +CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 3b0fbfb28efd..1975d41e0763 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -219,7 +219,7 @@ CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_RTAS is not set -# CONFIG_MMIO_NVRAM is not set +CONFIG_MMIO_NVRAM=y # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_PPC_INDIRECT_IO is not set @@ -1124,7 +1124,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set -# CONFIG_NVRAM is not set +CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h index 24d79e3abd8e..0835eb977ba9 100644 --- a/arch/powerpc/include/asm/cpm.h +++ b/arch/powerpc/include/asm/cpm.h @@ -3,8 +3,47 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <linux/errno.h> #include <linux/of.h> +/* + * USB Controller pram common to QE and CPM. + */ +struct usb_ctlr { + u8 usb_usmod; + u8 usb_usadr; + u8 usb_uscom; + u8 res1[1]; + __be16 usb_usep[4]; + u8 res2[4]; + __be16 usb_usber; + u8 res3[2]; + __be16 usb_usbmr; + u8 res4[1]; + u8 usb_usbs; + /* Fields down below are QE-only */ + __be16 usb_ussft; + u8 res5[2]; + __be16 usb_usfrn; + u8 res6[0x22]; +} __attribute__ ((packed)); + +/* + * Function code bits, usually generic to devices. + */ +#ifdef CONFIG_CPM1 +#define CPMFCR_GBL ((u_char)0x00) /* Flag doesn't exist in CPM1 */ +#define CPMFCR_TC2 ((u_char)0x00) /* Flag doesn't exist in CPM1 */ +#define CPMFCR_DTB ((u_char)0x00) /* Flag doesn't exist in CPM1 */ +#define CPMFCR_BDB ((u_char)0x00) /* Flag doesn't exist in CPM1 */ +#else +#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ +#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ +#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ +#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ +#endif +#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ + /* Opcodes common to CPM1 and CPM2 */ #define CPM_CR_INIT_TRX ((ushort)0x0000) @@ -93,13 +132,56 @@ typedef struct cpm_buf_desc { #define BD_I2C_START (0x0400) int cpm_muram_init(void); + +#if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) unsigned long cpm_muram_alloc(unsigned long size, unsigned long align); int cpm_muram_free(unsigned long offset); unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); void __iomem *cpm_muram_addr(unsigned long offset); unsigned long cpm_muram_offset(void __iomem *addr); dma_addr_t cpm_muram_dma(void __iomem *addr); +#else +static inline unsigned long cpm_muram_alloc(unsigned long size, + unsigned long align) +{ + return -ENOSYS; +} + +static inline int cpm_muram_free(unsigned long offset) +{ + return -ENOSYS; +} + +static inline unsigned long cpm_muram_alloc_fixed(unsigned long offset, + unsigned long size) +{ + return -ENOSYS; +} + +static inline void __iomem *cpm_muram_addr(unsigned long offset) +{ + return NULL; +} + +static inline unsigned long cpm_muram_offset(void __iomem *addr) +{ + return -ENOSYS; +} + +static inline dma_addr_t cpm_muram_dma(void __iomem *addr) +{ + return 0; +} +#endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */ + +#ifdef CONFIG_CPM int cpm_command(u32 command, u8 opcode); +#else +static inline int cpm_command(u32 command, u8 opcode) +{ + return -ENOSYS; +} +#endif /* CONFIG_CPM */ int cpm2_gpiochip_add32(struct device_node *np); diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h index 7685ffde8821..81b01192f440 100644 --- a/arch/powerpc/include/asm/cpm1.h +++ b/arch/powerpc/include/asm/cpm1.h @@ -478,51 +478,6 @@ typedef struct iic { char res2[2]; /* Reserved */ } iic_t; -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; - ushort spi_rpbase; /* Relocation pointer */ - ushort spi_res2; -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_LEN4 ((ushort)0x0030) /* 4 bits per char */ -#define SPMODE_LEN8 ((ushort)0x0070) /* 8 bits per char */ -#define SPMODE_LEN16 ((ushort)0x00f0) /* 16 bits per char */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -/* SPIE fields */ -#define SPIE_MME 0x20 -#define SPIE_TXE 0x10 -#define SPIE_BSY 0x04 -#define SPIE_TXB 0x02 -#define SPIE_RXB 0x01 - /* * RISC Controller Configuration Register definitons */ diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h index 990ff191da8b..f42e9baf3a4e 100644 --- a/arch/powerpc/include/asm/cpm2.h +++ b/arch/powerpc/include/asm/cpm2.h @@ -124,14 +124,6 @@ static inline void cpm2_fastbrg(uint brg, uint rate, int div16) __cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT); } -/* Function code bits, usually generic to devices. -*/ -#define CPMFCR_GBL ((u_char)0x20) /* Set memory snooping */ -#define CPMFCR_EB ((u_char)0x10) /* Set big endian byte order */ -#define CPMFCR_TC2 ((u_char)0x04) /* Transfer code 2 value */ -#define CPMFCR_DTB ((u_char)0x02) /* Use local bus for data when set */ -#define CPMFCR_BDB ((u_char)0x01) /* Use local bus for BD when set */ - /* Parameter RAM offsets from the base. */ #define PROFF_SCC1 ((uint)0x8000) @@ -654,45 +646,6 @@ typedef struct iic { uint iic_txtmp; /* Internal */ } iic_t; -/* SPI parameter RAM. -*/ -typedef struct spi { - ushort spi_rbase; /* Rx Buffer descriptor base address */ - ushort spi_tbase; /* Tx Buffer descriptor base address */ - u_char spi_rfcr; /* Rx function code */ - u_char spi_tfcr; /* Tx function code */ - ushort spi_mrblr; /* Max receive buffer length */ - uint spi_rstate; /* Internal */ - uint spi_rdp; /* Internal */ - ushort spi_rbptr; /* Internal */ - ushort spi_rbc; /* Internal */ - uint spi_rxtmp; /* Internal */ - uint spi_tstate; /* Internal */ - uint spi_tdp; /* Internal */ - ushort spi_tbptr; /* Internal */ - ushort spi_tbc; /* Internal */ - uint spi_txtmp; /* Internal */ - uint spi_res; /* Tx temp. */ - uint spi_res1[4]; /* SDMA temp. */ -} spi_t; - -/* SPI Mode register. -*/ -#define SPMODE_LOOP ((ushort)0x4000) /* Loopback */ -#define SPMODE_CI ((ushort)0x2000) /* Clock Invert */ -#define SPMODE_CP ((ushort)0x1000) /* Clock Phase */ -#define SPMODE_DIV16 ((ushort)0x0800) /* BRG/16 mode */ -#define SPMODE_REV ((ushort)0x0400) /* Reversed Data */ -#define SPMODE_MSTR ((ushort)0x0200) /* SPI Master */ -#define SPMODE_EN ((ushort)0x0100) /* Enable */ -#define SPMODE_LENMSK ((ushort)0x00f0) /* character length */ -#define SPMODE_PMMSK ((ushort)0x000f) /* prescale modulus */ - -#define SPMODE_LEN(x) ((((x)-1)&0xF)<<4) -#define SPMODE_PM(x) ((x) &0xF) - -#define SPI_EB ((u_char)0x10) /* big endian byte order */ - /* IDMA parameter RAM */ typedef struct idma { diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index a98653b26231..57c400071995 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -147,6 +147,7 @@ .globl label##_pSeries; \ label##_pSeries: \ HMT_MEDIUM; \ + DO_KVM n; \ mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) @@ -170,6 +171,7 @@ label##_pSeries: \ .globl label##_pSeries; \ label##_pSeries: \ HMT_MEDIUM; \ + DO_KVM n; \ mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ mfspr r13,SPRN_SPRG_PACA; /* get paca address into r13 */ \ std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \ diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h index b1dafb6a9743..5856a66ab404 100644 --- a/arch/powerpc/include/asm/hugetlb.h +++ b/arch/powerpc/include/asm/hugetlb.h @@ -3,6 +3,10 @@ #include <asm/page.h> +pte_t *huge_pte_offset_and_shift(struct mm_struct *mm, + unsigned long addr, unsigned *shift); + +void flush_dcache_icache_hugepage(struct page *page); int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr, unsigned long len); @@ -11,12 +15,6 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling); -void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte); - -pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep); - /* * The version of vma_mmu_pagesize() in arch/powerpc/mm/hugetlbpage.c needs * to override the version in mm/hugetlb.c @@ -42,9 +40,26 @@ static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) { } + +static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + set_pte_at(mm, addr, ptep, pte); +} + +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1); + return __pte(old); +} + static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { + pte_t pte; + pte = huge_ptep_get_and_clear(vma->vm_mm, addr, ptep); + flush_tlb_page(vma, addr); } static inline int huge_pte_none(pte_t pte) diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index c27caac47ad1..f0275818b95c 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -212,6 +212,19 @@ #define H_QUERY_INT_STATE 0x1E4 #define H_POLL_PENDING 0x1D8 #define H_ILLAN_ATTRIBUTES 0x244 +#define H_MODIFY_HEA_QP 0x250 +#define H_QUERY_HEA_QP 0x254 +#define H_QUERY_HEA 0x258 +#define H_QUERY_HEA_PORT 0x25C +#define H_MODIFY_HEA_PORT 0x260 +#define H_REG_BCMC 0x264 +#define H_DEREG_BCMC 0x268 +#define H_REGISTER_HEA_RPAGES 0x26C +#define H_DISABLE_AND_GET_HEA 0x270 +#define H_GET_HEA_INFO 0x274 +#define H_ALLOC_HEA_RESOURCE 0x278 +#define H_ADD_CONN 0x284 +#define H_DEL_CONN 0x288 #define H_JOIN 0x298 #define H_VASI_STATE 0x2A4 #define H_ENABLE_CRQ 0x2B0 diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index abbc2aaaced5..9f4c9d4f5803 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -64,11 +64,6 @@ extern void iseries_handle_interrupts(void); get_paca()->hard_enabled = 0; \ } while(0) -static inline int irqs_disabled_flags(unsigned long flags) -{ - return flags == 0; -} - #else #if defined(CONFIG_BOOKE) diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h index d4f069bf0e57..7c64fda5357b 100644 --- a/arch/powerpc/include/asm/immap_cpm2.h +++ b/arch/powerpc/include/asm/immap_cpm2.h @@ -549,7 +549,7 @@ typedef struct comm_proc { /* USB Controller. */ -typedef struct usb_ctlr { +typedef struct cpm_usb_ctlr { u8 usb_usmod; u8 usb_usadr; u8 usb_uscom; diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h index c346d0bcd230..4e10f508570a 100644 --- a/arch/powerpc/include/asm/immap_qe.h +++ b/arch/powerpc/include/asm/immap_qe.h @@ -210,7 +210,7 @@ struct sir { } __attribute__ ((packed)); /* USB Controller */ -struct usb_ctlr { +struct qe_usb_ctlr { u8 usb_usmod; u8 usb_usadr; u8 usb_uscom; @@ -229,7 +229,7 @@ struct usb_ctlr { } __attribute__ ((packed)); /* MCC */ -struct mcc { +struct qe_mcc { __be32 mcce; /* MCC event register */ __be32 mccm; /* MCC mask register */ __be32 mccf; /* MCC configuration register */ @@ -431,9 +431,9 @@ struct qe_immap { struct qe_mux qmx; /* QE Multiplexer */ struct qe_timers qet; /* QE Timers */ struct spi spi[0x2]; /* spi */ - struct mcc mcc; /* mcc */ + struct qe_mcc mcc; /* mcc */ struct qe_brg brg; /* brg */ - struct usb_ctlr usb; /* USB */ + struct qe_usb_ctlr usb; /* USB */ struct si1 si1; /* SI */ u8 res11[0x800]; struct sir sir; /* SI Routing Tables */ diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index bbcd1aaf3dfd..e054baef1845 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -17,8 +17,6 @@ #include <asm/atomic.h> -#define get_irq_desc(irq) (&irq_desc[(irq)]) - /* Define a way to iterate across irqs. */ #define for_each_irq(i) \ for ((i) = 0; (i) < NR_IRQS; ++(i)) @@ -34,12 +32,15 @@ extern atomic_t ppc_n_lost_interrupts; */ #define NO_IRQ_IGNORE ((unsigned int)-1) -/* Total number of virq in the platform (make it a CONFIG_* option ? */ -#define NR_IRQS 512 +/* Total number of virq in the platform */ +#define NR_IRQS CONFIG_NR_IRQS /* Number of irqs reserved for the legacy controller */ #define NUM_ISA_INTERRUPTS 16 +/* Same thing, used by the generic IRQ code */ +#define NR_IRQS_LEGACY NUM_ISA_INTERRUPTS + /* This type is the placeholder for a hardware interrupt number. It has to * be big enough to enclose whatever representation is used by a given * platform. @@ -99,7 +100,7 @@ struct irq_host_ops { * interrupt controller has for that line) */ int (*xlate)(struct irq_host *h, struct device_node *ctrler, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_type); }; @@ -313,7 +314,7 @@ extern void irq_free_virt(unsigned int virq, unsigned int count); * of the of_irq_map_*() functions. */ extern unsigned int irq_create_of_mapping(struct device_node *controller, - u32 *intspec, unsigned int intsize); + const u32 *intspec, unsigned int intsize); /** * irq_of_parse_and_map - Parse and Map an interrupt into linux virq space diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h index bb2de6aa5ce0..81f3b0b5601e 100644 --- a/arch/powerpc/include/asm/kvm.h +++ b/arch/powerpc/include/asm/kvm.h @@ -46,6 +46,24 @@ struct kvm_regs { }; struct kvm_sregs { + __u32 pvr; + union { + struct { + __u64 sdr1; + struct { + struct { + __u64 slbe; + __u64 slbv; + } slb[64]; + } ppc64; + struct { + __u32 sr[16]; + __u64 ibat[8]; + __u64 dbat[8]; + } ppc32; + } s; + __u8 pad[1020]; + } u; }; struct kvm_fpu { diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h index 56bfae59837f..af2abe74f544 100644 --- a/arch/powerpc/include/asm/kvm_asm.h +++ b/arch/powerpc/include/asm/kvm_asm.h @@ -49,6 +49,46 @@ #define BOOKE_INTERRUPT_SPE_FP_ROUND 34 #define BOOKE_INTERRUPT_PERFORMANCE_MONITOR 35 +/* book3s */ + +#define BOOK3S_INTERRUPT_SYSTEM_RESET 0x100 +#define BOOK3S_INTERRUPT_MACHINE_CHECK 0x200 +#define BOOK3S_INTERRUPT_DATA_STORAGE 0x300 +#define BOOK3S_INTERRUPT_DATA_SEGMENT 0x380 +#define BOOK3S_INTERRUPT_INST_STORAGE 0x400 +#define BOOK3S_INTERRUPT_INST_SEGMENT 0x480 +#define BOOK3S_INTERRUPT_EXTERNAL 0x500 +#define BOOK3S_INTERRUPT_ALIGNMENT 0x600 +#define BOOK3S_INTERRUPT_PROGRAM 0x700 +#define BOOK3S_INTERRUPT_FP_UNAVAIL 0x800 +#define BOOK3S_INTERRUPT_DECREMENTER 0x900 +#define BOOK3S_INTERRUPT_SYSCALL 0xc00 +#define BOOK3S_INTERRUPT_TRACE 0xd00 +#define BOOK3S_INTERRUPT_PERFMON 0xf00 +#define BOOK3S_INTERRUPT_ALTIVEC 0xf20 +#define BOOK3S_INTERRUPT_VSX 0xf40 + +#define BOOK3S_IRQPRIO_SYSTEM_RESET 0 +#define BOOK3S_IRQPRIO_DATA_SEGMENT 1 +#define BOOK3S_IRQPRIO_INST_SEGMENT 2 +#define BOOK3S_IRQPRIO_DATA_STORAGE 3 +#define BOOK3S_IRQPRIO_INST_STORAGE 4 +#define BOOK3S_IRQPRIO_ALIGNMENT 5 +#define BOOK3S_IRQPRIO_PROGRAM 6 +#define BOOK3S_IRQPRIO_FP_UNAVAIL 7 +#define BOOK3S_IRQPRIO_ALTIVEC 8 +#define BOOK3S_IRQPRIO_VSX 9 +#define BOOK3S_IRQPRIO_SYSCALL 10 +#define BOOK3S_IRQPRIO_MACHINE_CHECK 11 +#define BOOK3S_IRQPRIO_DEBUG 12 +#define BOOK3S_IRQPRIO_EXTERNAL 13 +#define BOOK3S_IRQPRIO_DECREMENTER 14 +#define BOOK3S_IRQPRIO_PERFORMANCE_MONITOR 15 +#define BOOK3S_IRQPRIO_MAX 16 + +#define BOOK3S_HFLAG_DCBZ32 0x1 +#define BOOK3S_HFLAG_SLB 0x2 + #define RESUME_FLAG_NV (1<<0) /* Reload guest nonvolatile state? */ #define RESUME_FLAG_HOST (1<<1) /* Resume host? */ diff --git a/arch/powerpc/include/asm/kvm_book3s.h b/arch/powerpc/include/asm/kvm_book3s.h new file mode 100644 index 000000000000..74b7369770d0 --- /dev/null +++ b/arch/powerpc/include/asm/kvm_book3s.h @@ -0,0 +1,139 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#ifndef __ASM_KVM_BOOK3S_H__ +#define __ASM_KVM_BOOK3S_H__ + +#include <linux/types.h> +#include <linux/kvm_host.h> +#include <asm/kvm_ppc.h> + +struct kvmppc_slb { + u64 esid; + u64 vsid; + u64 orige; + u64 origv; + bool valid; + bool Ks; + bool Kp; + bool nx; + bool large; + bool class; +}; + +struct kvmppc_sr { + u32 raw; + u32 vsid; + bool Ks; + bool Kp; + bool nx; +}; + +struct kvmppc_bat { + u64 raw; + u32 bepi; + u32 bepi_mask; + bool vs; + bool vp; + u32 brpn; + u8 wimg; + u8 pp; +}; + +struct kvmppc_sid_map { + u64 guest_vsid; + u64 guest_esid; + u64 host_vsid; + bool valid; +}; + +#define SID_MAP_BITS 9 +#define SID_MAP_NUM (1 << SID_MAP_BITS) +#define SID_MAP_MASK (SID_MAP_NUM - 1) + +struct kvmppc_vcpu_book3s { + struct kvm_vcpu vcpu; + struct kvmppc_sid_map sid_map[SID_MAP_NUM]; + struct kvmppc_slb slb[64]; + struct { + u64 esid; + u64 vsid; + } slb_shadow[64]; + u8 slb_shadow_max; + struct kvmppc_sr sr[16]; + struct kvmppc_bat ibat[8]; + struct kvmppc_bat dbat[8]; + u64 hid[6]; + int slb_nr; + u64 sdr1; + u64 dsisr; + u64 hior; + u64 msr_mask; + u64 vsid_first; + u64 vsid_next; + u64 vsid_max; + int context_id; +}; + +#define CONTEXT_HOST 0 +#define CONTEXT_GUEST 1 +#define CONTEXT_GUEST_END 2 + +#define VSID_REAL 0xfffffffffff00000 +#define VSID_REAL_DR 0xffffffffffe00000 +#define VSID_REAL_IR 0xffffffffffd00000 +#define VSID_BAT 0xffffffffffc00000 +#define VSID_PR 0x8000000000000000 + +extern void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 ea, u64 ea_mask); +extern void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 vp, u64 vp_mask); +extern void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end); +extern void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 new_msr); +extern void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu); +extern void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu); +extern int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte); +extern int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr); +extern void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu); +extern struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data); +extern int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr, bool data); +extern int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr); +extern void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec); +extern void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, + bool upper, u32 val); + +extern u32 kvmppc_trampoline_lowmem; +extern u32 kvmppc_trampoline_enter; + +static inline struct kvmppc_vcpu_book3s *to_book3s(struct kvm_vcpu *vcpu) +{ + return container_of(vcpu, struct kvmppc_vcpu_book3s, vcpu); +} + +static inline ulong dsisr(void) +{ + ulong r; + asm ( "mfdsisr %0 " : "=r" (r) ); + return r; +} + +extern void kvm_return_point(void); + +#define INS_DCBZ 0x7c0007ec + +#endif /* __ASM_KVM_BOOK3S_H__ */ diff --git a/arch/powerpc/include/asm/kvm_book3s_64_asm.h b/arch/powerpc/include/asm/kvm_book3s_64_asm.h new file mode 100644 index 000000000000..2e06ee8184ef --- /dev/null +++ b/arch/powerpc/include/asm/kvm_book3s_64_asm.h @@ -0,0 +1,58 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#ifndef __ASM_KVM_BOOK3S_ASM_H__ +#define __ASM_KVM_BOOK3S_ASM_H__ + +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER + +#include <asm/kvm_asm.h> + +.macro DO_KVM intno + .if (\intno == BOOK3S_INTERRUPT_SYSTEM_RESET) || \ + (\intno == BOOK3S_INTERRUPT_MACHINE_CHECK) || \ + (\intno == BOOK3S_INTERRUPT_DATA_STORAGE) || \ + (\intno == BOOK3S_INTERRUPT_INST_STORAGE) || \ + (\intno == BOOK3S_INTERRUPT_DATA_SEGMENT) || \ + (\intno == BOOK3S_INTERRUPT_INST_SEGMENT) || \ + (\intno == BOOK3S_INTERRUPT_EXTERNAL) || \ + (\intno == BOOK3S_INTERRUPT_ALIGNMENT) || \ + (\intno == BOOK3S_INTERRUPT_PROGRAM) || \ + (\intno == BOOK3S_INTERRUPT_FP_UNAVAIL) || \ + (\intno == BOOK3S_INTERRUPT_DECREMENTER) || \ + (\intno == BOOK3S_INTERRUPT_SYSCALL) || \ + (\intno == BOOK3S_INTERRUPT_TRACE) || \ + (\intno == BOOK3S_INTERRUPT_PERFMON) || \ + (\intno == BOOK3S_INTERRUPT_ALTIVEC) || \ + (\intno == BOOK3S_INTERRUPT_VSX) + + b kvmppc_trampoline_\intno +kvmppc_resume_\intno: + + .endif +.endm + +#else + +.macro DO_KVM intno +.endm + +#endif /* CONFIG_KVM_BOOK3S_64_HANDLER */ + +#endif /* __ASM_KVM_BOOK3S_ASM_H__ */ diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index c9c930ed11d7..1201f62d0d73 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -21,7 +21,8 @@ #define __POWERPC_KVM_HOST_H__ #include <linux/mutex.h> -#include <linux/timer.h> +#include <linux/hrtimer.h> +#include <linux/interrupt.h> #include <linux/types.h> #include <linux/kvm_types.h> #include <asm/kvm_asm.h> @@ -37,6 +38,8 @@ #define KVM_NR_PAGE_SIZES 1 #define KVM_PAGES_PER_HPAGE(x) (1UL<<31) +#define HPTEG_CACHE_NUM 1024 + struct kvm; struct kvm_run; struct kvm_vcpu; @@ -63,6 +66,17 @@ struct kvm_vcpu_stat { u32 dec_exits; u32 ext_intr_exits; u32 halt_wakeup; +#ifdef CONFIG_PPC64 + u32 pf_storage; + u32 pf_instruc; + u32 sp_storage; + u32 sp_instruc; + u32 queue_intr; + u32 ld; + u32 ld_slow; + u32 st; + u32 st_slow; +#endif }; enum kvm_exit_types { @@ -109,9 +123,53 @@ struct kvmppc_exit_timing { struct kvm_arch { }; +struct kvmppc_pte { + u64 eaddr; + u64 vpage; + u64 raddr; + bool may_read; + bool may_write; + bool may_execute; +}; + +struct kvmppc_mmu { + /* book3s_64 only */ + void (*slbmte)(struct kvm_vcpu *vcpu, u64 rb, u64 rs); + u64 (*slbmfee)(struct kvm_vcpu *vcpu, u64 slb_nr); + u64 (*slbmfev)(struct kvm_vcpu *vcpu, u64 slb_nr); + void (*slbie)(struct kvm_vcpu *vcpu, u64 slb_nr); + void (*slbia)(struct kvm_vcpu *vcpu); + /* book3s */ + void (*mtsrin)(struct kvm_vcpu *vcpu, u32 srnum, ulong value); + u32 (*mfsrin)(struct kvm_vcpu *vcpu, u32 srnum); + int (*xlate)(struct kvm_vcpu *vcpu, gva_t eaddr, struct kvmppc_pte *pte, bool data); + void (*reset_msr)(struct kvm_vcpu *vcpu); + void (*tlbie)(struct kvm_vcpu *vcpu, ulong addr, bool large); + int (*esid_to_vsid)(struct kvm_vcpu *vcpu, u64 esid, u64 *vsid); + u64 (*ea_to_vp)(struct kvm_vcpu *vcpu, gva_t eaddr, bool data); + bool (*is_dcbz32)(struct kvm_vcpu *vcpu); +}; + +struct hpte_cache { + u64 host_va; + u64 pfn; + ulong slot; + struct kvmppc_pte pte; +}; + struct kvm_vcpu_arch { - u32 host_stack; + ulong host_stack; u32 host_pid; +#ifdef CONFIG_PPC64 + ulong host_msr; + ulong host_r2; + void *host_retip; + ulong trampoline_lowmem; + ulong trampoline_enter; + ulong highmem_handler; + ulong host_paca_phys; + struct kvmppc_mmu mmu; +#endif u64 fpr[32]; ulong gpr[32]; @@ -123,6 +181,10 @@ struct kvm_vcpu_arch { ulong xer; ulong msr; +#ifdef CONFIG_PPC64 + ulong shadow_msr; + ulong hflags; +#endif u32 mmucr; ulong sprg0; ulong sprg1; @@ -149,6 +211,7 @@ struct kvm_vcpu_arch { u32 ivor[64]; ulong ivpr; u32 pir; + u32 pvr; u32 shadow_pid; u32 pid; @@ -174,6 +237,9 @@ struct kvm_vcpu_arch { #endif u32 last_inst; +#ifdef CONFIG_PPC64 + ulong fault_dsisr; +#endif ulong fault_dear; ulong fault_esr; gpa_t paddr_accessed; @@ -185,8 +251,15 @@ struct kvm_vcpu_arch { u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */ - struct timer_list dec_timer; + struct hrtimer dec_timer; + struct tasklet_struct tasklet; + u64 dec_jiffies; unsigned long pending_exceptions; + +#ifdef CONFIG_PPC64 + struct hpte_cache hpte_cache[HPTEG_CACHE_NUM]; + int hpte_cache_offset; +#endif }; #endif /* __POWERPC_KVM_HOST_H__ */ diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h index 2c6ee349df5e..269ee46ab028 100644 --- a/arch/powerpc/include/asm/kvm_ppc.h +++ b/arch/powerpc/include/asm/kvm_ppc.h @@ -39,6 +39,7 @@ enum emulation_result { extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu); extern char kvmppc_handlers_start[]; extern unsigned long kvmppc_handler_len; +extern void kvmppc_handler_highmem(void); extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu); extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu, diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index f78f65c38f05..14b592dfb4e8 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -100,7 +100,14 @@ struct lppaca { // Used to pass parms from the OS to PLIC for SetAsrAndRfid u64 saved_gpr3; // Saved GPR3 x20-x27 u64 saved_gpr4; // Saved GPR4 x28-x2F - u64 saved_gpr5; // Saved GPR5 x30-x37 + union { + u64 saved_gpr5; /* Saved GPR5 x30-x37 */ + struct { + u8 cede_latency_hint; /* x30 */ + u8 reserved[7]; /* x31-x36 */ + } fields; + } gpr5_dword; + u8 dtl_enable_mask; // Dispatch Trace Log mask x38-x38 u8 donate_dedicated_cpu; // Donate dedicated CPU cycles x39-x39 diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 9efa2be78331..9f0fc9e6ce0d 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -266,6 +266,11 @@ struct machdep_calls { void (*suspend_disable_irqs)(void); void (*suspend_enable_irqs)(void); #endif + +#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE + ssize_t (*cpu_probe)(const char *, size_t); + ssize_t (*cpu_release)(const char *, size_t); +#endif }; extern void e500_idle(void); diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h index 079c06eae446..a062c57696d0 100644 --- a/arch/powerpc/include/asm/macio.h +++ b/arch/powerpc/include/asm/macio.h @@ -39,6 +39,7 @@ struct macio_dev struct macio_bus *bus; /* macio bus this device is on */ struct macio_dev *media_bay; /* Device is part of a media bay */ struct of_device ofdev; + struct device_dma_parameters dma_parms; /* ide needs that */ int n_resources; struct resource resource[MACIO_DEV_COUNT_RESOURCES]; int n_interrupts; @@ -78,6 +79,8 @@ static inline unsigned long macio_resource_len(struct macio_dev *dev, int resour return res->end - res->start + 1; } +extern int macio_enable_devres(struct macio_dev *dev); + extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name); extern void macio_release_resource(struct macio_dev *dev, int resource_no); extern int macio_request_resources(struct macio_dev *dev, const char *name); @@ -131,6 +134,9 @@ struct macio_driver int (*resume)(struct macio_dev* dev); int (*shutdown)(struct macio_dev* dev); +#ifdef CONFIG_PMAC_MEDIABAY + void (*mediabay_event)(struct macio_dev* dev, int mb_state); +#endif struct device_driver driver; }; #define to_macio_driver(drv) container_of(drv,struct macio_driver, driver) diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h index b2efb3325808..11037a4133ee 100644 --- a/arch/powerpc/include/asm/mediabay.h +++ b/arch/powerpc/include/asm/mediabay.h @@ -17,26 +17,31 @@ #define MB_POWER 6 /* media bay contains a Power device (???) */ #define MB_NO 7 /* media bay contains nothing */ -/* Number of bays in the machine or 0 */ -extern int media_bay_count; +struct macio_dev; -#ifdef CONFIG_BLK_DEV_IDE_PMAC -#include <linux/ide.h> +#ifdef CONFIG_PMAC_MEDIABAY -int check_media_bay_by_base(unsigned long base, int what); -/* called by IDE PMAC host driver to register IDE controller for media bay */ -int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, - int irq, ide_hwif_t *hwif); +/* Check the content type of the bay, returns MB_NO if the bay is still + * transitionning + */ +extern int check_media_bay(struct macio_dev *bay); -int check_media_bay(struct device_node *which_bay, int what); +/* The ATA driver uses the calls below to temporarily hold on the + * media bay callbacks while initializing the interface + */ +extern void lock_media_bay(struct macio_dev *bay); +extern void unlock_media_bay(struct macio_dev *bay); #else -static inline int check_media_bay(struct device_node *which_bay, int what) +static inline int check_media_bay(struct macio_dev *bay) { - return -ENODEV; + return MB_NO; } +static inline void lock_media_bay(struct macio_dev *bay) { } +static inline void unlock_media_bay(struct macio_dev *bay) { } + #endif #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h index bebe31c2e907..2102b214a87c 100644 --- a/arch/powerpc/include/asm/mmu-hash64.h +++ b/arch/powerpc/include/asm/mmu-hash64.h @@ -173,14 +173,6 @@ extern unsigned long tce_alloc_start, tce_alloc_end; */ extern int mmu_ci_restrictions; -#ifdef CONFIG_HUGETLB_PAGE -/* - * The page size indexes of the huge pages for use by hugetlbfs - */ -extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT]; - -#endif /* CONFIG_HUGETLB_PAGE */ - /* * This function sets the AVPN and L fields of the HPTE appropriately * for the page size @@ -253,10 +245,11 @@ extern int __hash_page_64K(unsigned long ea, unsigned long access, unsigned long vsid, pte_t *ptep, unsigned long trap, unsigned int local, int ssize); struct mm_struct; +unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap); extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); -extern int hash_huge_page(struct mm_struct *mm, unsigned long access, - unsigned long ea, unsigned long vsid, int local, - unsigned long trap); +int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid, + pte_t *ptep, unsigned long trap, int local, int ssize, + unsigned int shift, unsigned int mmu_psize); extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend, unsigned long pstart, unsigned long prot, @@ -380,6 +373,38 @@ extern void slb_set_size(u16 size); #ifndef __ASSEMBLY__ +#ifdef CONFIG_PPC_SUBPAGE_PROT +/* + * For the sub-page protection option, we extend the PGD with one of + * these. Basically we have a 3-level tree, with the top level being + * the protptrs array. To optimize speed and memory consumption when + * only addresses < 4GB are being protected, pointers to the first + * four pages of sub-page protection words are stored in the low_prot + * array. + * Each page of sub-page protection words protects 1GB (4 bytes + * protects 64k). For the 3-level tree, each page of pointers then + * protects 8TB. + */ +struct subpage_prot_table { + unsigned long maxaddr; /* only addresses < this are protected */ + unsigned int **protptrs[2]; + unsigned int *low_prot[4]; +}; + +#define SBP_L1_BITS (PAGE_SHIFT - 2) +#define SBP_L2_BITS (PAGE_SHIFT - 3) +#define SBP_L1_COUNT (1 << SBP_L1_BITS) +#define SBP_L2_COUNT (1 << SBP_L2_BITS) +#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) +#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) + +extern void subpage_prot_free(struct mm_struct *mm); +extern void subpage_prot_init_new_context(struct mm_struct *mm); +#else +static inline void subpage_prot_free(struct mm_struct *mm) {} +static inline void subpage_prot_init_new_context(struct mm_struct *mm) { } +#endif /* CONFIG_PPC_SUBPAGE_PROT */ + typedef unsigned long mm_context_id_t; typedef struct { @@ -393,6 +418,9 @@ typedef struct { u16 sllp; /* SLB page size encoding */ #endif unsigned long vdso_base; +#ifdef CONFIG_PPC_SUBPAGE_PROT + struct subpage_prot_table spt; +#endif /* CONFIG_PPC_SUBPAGE_PROT */ } mm_context_t; diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h index b34e94d94435..26383e0778aa 100644 --- a/arch/powerpc/include/asm/mmu_context.h +++ b/arch/powerpc/include/asm/mmu_context.h @@ -23,6 +23,8 @@ extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm); extern void set_context(unsigned long id, pgd_t *pgd); #ifdef CONFIG_PPC_BOOK3S_64 +extern int __init_new_context(void); +extern void __destroy_context(int context_id); static inline void mmu_context_init(void) { } #else extern void mmu_context_init(void); diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h index 1b4f697abbdd..b664ce79a172 100644 --- a/arch/powerpc/include/asm/mpc52xx.h +++ b/arch/powerpc/include/asm/mpc52xx.h @@ -276,6 +276,53 @@ extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv); extern unsigned int mpc52xx_get_xtal_freq(struct device_node *node); extern void mpc52xx_restart(char *cmd); +/* mpc52xx_gpt.c */ +struct mpc52xx_gpt_priv; +extern struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq); +extern int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period, + int continuous); +extern u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt); +extern int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt); + +/* mpc52xx_lpbfifo.c */ +#define MPC52XX_LPBFIFO_FLAG_READ (0) +#define MPC52XX_LPBFIFO_FLAG_WRITE (1<<0) +#define MPC52XX_LPBFIFO_FLAG_NO_INCREMENT (1<<1) +#define MPC52XX_LPBFIFO_FLAG_NO_DMA (1<<2) +#define MPC52XX_LPBFIFO_FLAG_POLL_DMA (1<<3) + +struct mpc52xx_lpbfifo_request { + struct list_head list; + + /* localplus bus address */ + unsigned int cs; + size_t offset; + + /* Memory address */ + void *data; + phys_addr_t data_phys; + + /* Details of transfer */ + size_t size; + size_t pos; /* current position of transfer */ + int flags; + + /* What to do when finished */ + void (*callback)(struct mpc52xx_lpbfifo_request *); + + void *priv; /* Driver private data */ + + /* statistics */ + int irq_count; + int irq_ticks; + u8 last_byte; + int buffer_not_done_cnt; +}; + +extern int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req); +extern void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req); +extern void mpc52xx_lpbfifo_poll(void); + /* mpc52xx_pic.c */ extern void mpc52xx_init_irq(void); extern unsigned int mpc52xx_get_irq(void); diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h index 6c587eddee59..850b72f27445 100644 --- a/arch/powerpc/include/asm/nvram.h +++ b/arch/powerpc/include/asm/nvram.h @@ -73,7 +73,6 @@ extern int nvram_write_error_log(char * buff, int length, extern int nvram_read_error_log(char * buff, int length, unsigned int * err_type, unsigned int *err_seq); extern int nvram_clear_error_log(void); -extern struct nvram_partition *nvram_find_partition(int sig, const char *name); extern int pSeries_nvram_init(void); diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h index e482e5352e69..d4b4bfa26fb3 100644 --- a/arch/powerpc/include/asm/pSeries_reconfig.h +++ b/arch/powerpc/include/asm/pSeries_reconfig.h @@ -17,6 +17,7 @@ #ifdef CONFIG_PPC_PSERIES extern int pSeries_reconfig_notifier_register(struct notifier_block *); extern void pSeries_reconfig_notifier_unregister(struct notifier_block *); +extern struct blocking_notifier_head pSeries_reconfig_chain; #else /* !CONFIG_PPC_PSERIES */ static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb) { diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 7d8514ceceae..5e9b4ef71415 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -129,6 +129,15 @@ struct paca_struct { u64 system_time; /* accumulated system TB ticks */ u64 startpurr; /* PURR/TB value snapshot */ u64 startspurr; /* SPURR value snapshot */ + +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER + struct { + u64 esid; + u64 vsid; + } kvm_slb[64]; /* guest SLB */ + u8 kvm_slb_max; /* highest used guest slb entry */ + u8 kvm_in_guest; /* are we inside the guest? */ +#endif }; extern struct paca_struct paca[]; diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index ff24254990e1..e96d52a516ba 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -229,6 +229,20 @@ typedef unsigned long pgprot_t; #endif +typedef struct { signed long pd; } hugepd_t; +#define HUGEPD_SHIFT_MASK 0x3f + +#ifdef CONFIG_HUGETLB_PAGE +static inline int hugepd_ok(hugepd_t hpd) +{ + return (hpd.pd > 0); +} + +#define is_hugepd(pdep) (hugepd_ok(*((hugepd_t *)(pdep)))) +#else /* CONFIG_HUGETLB_PAGE */ +#define is_hugepd(pdep) 0 +#endif /* CONFIG_HUGETLB_PAGE */ + struct page; extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg); extern void copy_user_page(void *to, void *from, unsigned long vaddr, diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h index 3f17b83f55a1..bfc4e027e2ad 100644 --- a/arch/powerpc/include/asm/page_64.h +++ b/arch/powerpc/include/asm/page_64.h @@ -90,7 +90,7 @@ extern unsigned int HPAGE_SHIFT; #define HPAGE_SIZE ((1UL) << HPAGE_SHIFT) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) #define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT) -#define HUGE_MAX_HSTATE 3 +#define HUGE_MAX_HSTATE (MMU_PAGE_COUNT-1) #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h index c9500d666a1d..580cf73b96e8 100644 --- a/arch/powerpc/include/asm/pgalloc-32.h +++ b/arch/powerpc/include/asm/pgalloc-32.h @@ -3,7 +3,8 @@ #include <linux/threads.h> -#define PTE_NONCACHE_NUM 0 /* dummy for now to share code w/ppc64 */ +/* For 32-bit, all levels of page tables are just drawn from get_free_page() */ +#define MAX_PGTABLE_INDEX_SIZE 0 extern void __bad_pte(pmd_t *pmd); @@ -36,11 +37,10 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr); extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr); -static inline void pgtable_free(pgtable_free_t pgf) +static inline void pgtable_free(void *table, unsigned index_size) { - void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK); - - free_page((unsigned long)p); + BUG_ON(index_size); /* 32-bit doesn't use this */ + free_page((unsigned long)table); } #define check_pgt_cache() do { } while (0) diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h index e6f069c4f713..605f5c5398d1 100644 --- a/arch/powerpc/include/asm/pgalloc-64.h +++ b/arch/powerpc/include/asm/pgalloc-64.h @@ -11,27 +11,34 @@ #include <linux/cpumask.h> #include <linux/percpu.h> -#ifndef CONFIG_PPC_SUBPAGE_PROT -static inline void subpage_prot_free(pgd_t *pgd) {} -#endif +/* + * Functions that deal with pagetables that could be at any level of + * the table need to be passed an "index_size" so they know how to + * handle allocation. For PTE pages (which are linked to a struct + * page for now, and drawn from the main get_free_pages() pool), the + * allocation size will be (2^index_size * sizeof(pointer)) and + * allocations are drawn from the kmem_cache in PGT_CACHE(index_size). + * + * The maximum index size needs to be big enough to allow any + * pagetable sizes we need, but small enough to fit in the low bits of + * any page table pointer. In other words all pagetables, even tiny + * ones, must be aligned to allow at least enough low 0 bits to + * contain this value. This value is also used as a mask, so it must + * be one less than a power of two. + */ +#define MAX_PGTABLE_INDEX_SIZE 0xf extern struct kmem_cache *pgtable_cache[]; - -#define PGD_CACHE_NUM 0 -#define PUD_CACHE_NUM 1 -#define PMD_CACHE_NUM 1 -#define HUGEPTE_CACHE_NUM 2 -#define PTE_NONCACHE_NUM 7 /* from GFP rather than kmem_cache */ +#define PGT_CACHE(shift) (pgtable_cache[(shift)-1]) static inline pgd_t *pgd_alloc(struct mm_struct *mm) { - return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL); + return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE), GFP_KERNEL); } static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) { - subpage_prot_free(pgd); - kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd); + kmem_cache_free(PGT_CACHE(PGD_INDEX_SIZE), pgd); } #ifndef CONFIG_PPC_64K_PAGES @@ -40,13 +47,13 @@ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr) { - return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM], + return kmem_cache_alloc(PGT_CACHE(PUD_INDEX_SIZE), GFP_KERNEL|__GFP_REPEAT); } static inline void pud_free(struct mm_struct *mm, pud_t *pud) { - kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud); + kmem_cache_free(PGT_CACHE(PUD_INDEX_SIZE), pud); } static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) @@ -78,13 +85,13 @@ static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr) { - return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM], + return kmem_cache_alloc(PGT_CACHE(PMD_INDEX_SIZE), GFP_KERNEL|__GFP_REPEAT); } static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd) { - kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd); + kmem_cache_free(PGT_CACHE(PMD_INDEX_SIZE), pmd); } static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, @@ -107,24 +114,22 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm, return page; } -static inline void pgtable_free(pgtable_free_t pgf) +static inline void pgtable_free(void *table, unsigned index_size) { - void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK); - int cachenum = pgf.val & PGF_CACHENUM_MASK; - - if (cachenum == PTE_NONCACHE_NUM) - free_page((unsigned long)p); - else - kmem_cache_free(pgtable_cache[cachenum], p); + if (!index_size) + free_page((unsigned long)table); + else { + BUG_ON(index_size > MAX_PGTABLE_INDEX_SIZE); + kmem_cache_free(PGT_CACHE(index_size), table); + } } -#define __pmd_free_tlb(tlb, pmd,addr) \ - pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \ - PMD_CACHE_NUM, PMD_TABLE_SIZE-1)) +#define __pmd_free_tlb(tlb, pmd, addr) \ + pgtable_free_tlb(tlb, pmd, PMD_INDEX_SIZE) #ifndef CONFIG_PPC_64K_PAGES #define __pud_free_tlb(tlb, pud, addr) \ - pgtable_free_tlb(tlb, pgtable_free_cache(pud, \ - PUD_CACHE_NUM, PUD_TABLE_SIZE-1)) + pgtable_free_tlb(tlb, pud, PUD_INDEX_SIZE) + #endif /* CONFIG_PPC_64K_PAGES */ #define check_pgt_cache() do { } while (0) diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h index f2e812de7c3c..abe8532bd14e 100644 --- a/arch/powerpc/include/asm/pgalloc.h +++ b/arch/powerpc/include/asm/pgalloc.h @@ -24,25 +24,6 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) __free_page(ptepage); } -typedef struct pgtable_free { - unsigned long val; -} pgtable_free_t; - -/* This needs to be big enough to allow for MMU_PAGE_COUNT + 2 to be stored - * and small enough to fit in the low bits of any naturally aligned page - * table cache entry. Arbitrarily set to 0x1f, that should give us some - * room to grow - */ -#define PGF_CACHENUM_MASK 0x1f - -static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, - unsigned long mask) -{ - BUG_ON(cachenum > PGF_CACHENUM_MASK); - - return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum}; -} - #ifdef CONFIG_PPC64 #include <asm/pgalloc-64.h> #else @@ -50,12 +31,12 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum, #endif #ifdef CONFIG_SMP -extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf); +extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift); extern void pte_free_finish(void); #else /* CONFIG_SMP */ -static inline void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf) +static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift) { - pgtable_free(pgf); + pgtable_free(table, shift); } static inline void pte_free_finish(void) { } #endif /* !CONFIG_SMP */ @@ -63,12 +44,9 @@ static inline void pte_free_finish(void) { } static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage, unsigned long address) { - pgtable_free_t pgf = pgtable_free_cache(page_address(ptepage), - PTE_NONCACHE_NUM, - PTE_TABLE_SIZE-1); tlb_flush_pgtable(tlb, address); pgtable_page_dtor(ptepage); - pgtable_free_tlb(tlb, pgf); + pgtable_free_tlb(tlb, page_address(ptepage), 0); } #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index 806abe7a3fa5..49865045d56f 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -354,6 +354,7 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) #define pgoff_to_pte(off) ((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE}) #define PTE_FILE_MAX_BITS (BITS_PER_LONG - PTE_RPN_SHIFT) +void pgtable_cache_add(unsigned shift, void (*ctor)(void *)); void pgtable_cache_init(void); /* @@ -378,7 +379,18 @@ void pgtable_cache_init(void); return pt; } -pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address); +#ifdef CONFIG_HUGETLB_PAGE +pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, + unsigned *shift); +#else +static inline pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, + unsigned *shift) +{ + if (shift) + *shift = 0; + return find_linux_pte(pgdir, ea); +} +#endif /* !CONFIG_HUGETLB_PAGE */ #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index 2a5da069714e..21207e54825b 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -211,6 +211,9 @@ extern void paging_init(void); */ extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t); +extern int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr); + #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h index dd5ea95fe61e..d44826e4ff97 100644 --- a/arch/powerpc/include/asm/pte-8xx.h +++ b/arch/powerpc/include/asm/pte-8xx.h @@ -33,21 +33,21 @@ #define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */ #define _PAGE_SHARED 0x0004 /* No ASID (context) compare */ #define _PAGE_SPECIAL 0x0008 /* SW entry, forced to 0 by the TLB miss */ +#define _PAGE_DIRTY 0x0100 /* C: page changed */ -/* These five software bits must be masked out when the entry is loaded - * into the TLB. +/* These 4 software bits must be masked out when the entry is loaded + * into the TLB, 1 SW bit left(0x0080). */ #define _PAGE_GUARDED 0x0010 /* software: guarded access */ -#define _PAGE_DIRTY 0x0020 /* software: page changed */ -#define _PAGE_RW 0x0040 /* software: user write access allowed */ -#define _PAGE_ACCESSED 0x0080 /* software: page referenced */ +#define _PAGE_ACCESSED 0x0020 /* software: page referenced */ +#define _PAGE_WRITETHRU 0x0040 /* software: caching is write through */ /* Setting any bits in the nibble with the follow two controls will * require a TLB exception handler change. It is assumed unused bits * are always zero. */ -#define _PAGE_HWWRITE 0x0100 /* h/w write enable: never set in Linux PTE */ -#define _PAGE_USER 0x0800 /* One of the PP bits, the other is USER&~RW */ +#define _PAGE_RW 0x0400 /* lsb PP bits, inverted in HW */ +#define _PAGE_USER 0x0800 /* msb PP bits */ #define _PMD_PRESENT 0x0001 #define _PMD_BAD 0x0ff0 diff --git a/arch/powerpc/include/asm/pte-hash64-64k.h b/arch/powerpc/include/asm/pte-hash64-64k.h index 82b72207c51c..c4490f9c67c4 100644 --- a/arch/powerpc/include/asm/pte-hash64-64k.h +++ b/arch/powerpc/include/asm/pte-hash64-64k.h @@ -76,41 +76,4 @@ remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, \ __pgprot(pgprot_val((prot)) | _PAGE_4K_PFN)) - -#ifdef CONFIG_PPC_SUBPAGE_PROT -/* - * For the sub-page protection option, we extend the PGD with one of - * these. Basically we have a 3-level tree, with the top level being - * the protptrs array. To optimize speed and memory consumption when - * only addresses < 4GB are being protected, pointers to the first - * four pages of sub-page protection words are stored in the low_prot - * array. - * Each page of sub-page protection words protects 1GB (4 bytes - * protects 64k). For the 3-level tree, each page of pointers then - * protects 8TB. - */ -struct subpage_prot_table { - unsigned long maxaddr; /* only addresses < this are protected */ - unsigned int **protptrs[2]; - unsigned int *low_prot[4]; -}; - -#undef PGD_TABLE_SIZE -#define PGD_TABLE_SIZE ((sizeof(pgd_t) << PGD_INDEX_SIZE) + \ - sizeof(struct subpage_prot_table)) - -#define SBP_L1_BITS (PAGE_SHIFT - 2) -#define SBP_L2_BITS (PAGE_SHIFT - 3) -#define SBP_L1_COUNT (1 << SBP_L1_BITS) -#define SBP_L2_COUNT (1 << SBP_L2_BITS) -#define SBP_L2_SHIFT (PAGE_SHIFT + SBP_L1_BITS) -#define SBP_L3_SHIFT (SBP_L2_SHIFT + SBP_L2_BITS) - -extern void subpage_prot_free(pgd_t *pgd); - -static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd) -{ - return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD); -} -#endif /* CONFIG_PPC_SUBPAGE_PROT */ #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h index f388f0ab193f..0947b36e534c 100644 --- a/arch/powerpc/include/asm/qe.h +++ b/arch/powerpc/include/asm/qe.h @@ -87,7 +87,7 @@ extern spinlock_t cmxgcr_lock; /* Export QE common operations */ #ifdef CONFIG_QUICC_ENGINE -extern void __init qe_reset(void); +extern void qe_reset(void); #else static inline void qe_reset(void) {} #endif @@ -145,8 +145,17 @@ static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {} static inline void qe_pin_set_dedicated(struct qe_pin *pin) {} #endif /* CONFIG_QE_GPIO */ -/* QE internal API */ +#ifdef CONFIG_QUICC_ENGINE int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); +#else +static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, + u32 cmd_input) +{ + return -ENOSYS; +} +#endif /* CONFIG_QUICC_ENGINE */ + +/* QE internal API */ enum qe_clock qe_clock_source(const char *source); unsigned int qe_get_brg_clk(void); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); @@ -154,7 +163,28 @@ int qe_get_snum(void); void qe_put_snum(u8 snum); unsigned int qe_get_num_of_risc(void); unsigned int qe_get_num_of_snums(void); -int qe_alive_during_sleep(void); + +static inline int qe_alive_during_sleep(void) +{ + /* + * MPC8568E reference manual says: + * + * "...power down sequence waits for all I/O interfaces to become idle. + * In some applications this may happen eventually without actively + * shutting down interfaces, but most likely, software will have to + * take steps to shut down the eTSEC, QUICC Engine Block, and PCI + * interfaces before issuing the command (either the write to the core + * MSR[WE] as described above or writing to POWMGTCSR) to put the + * device into sleep state." + * + * MPC8569E reference manual has a similar paragraph. + */ +#ifdef CONFIG_PPC_85xx + return 0; +#else + return 1; +#endif +} /* we actually use cpm_muram implementation, define this for convenience */ #define qe_muram_init cpm_muram_init @@ -210,8 +240,15 @@ struct qe_firmware_info { u64 extended_modes; /* Extended modes */ }; +#ifdef CONFIG_QUICC_ENGINE /* Upload a firmware to the QE */ int qe_upload_firmware(const struct qe_firmware *firmware); +#else +static inline int qe_upload_firmware(const struct qe_firmware *firmware) +{ + return -ENOSYS; +} +#endif /* CONFIG_QUICC_ENGINE */ /* Obtain information on the uploaded firmware */ struct qe_firmware_info *qe_get_firmware_info(void); diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index d9ea8d39c342..1d3b270d3083 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -37,7 +37,7 @@ extern void cpu_die(void); extern void smp_send_debugger_break(int cpu); extern void smp_message_recv(int); -DECLARE_PER_CPU(unsigned int, pvr); +DECLARE_PER_CPU(unsigned int, cpu_pvr); #ifdef CONFIG_HOTPLUG_CPU extern void fixup_irqs(cpumask_t map); diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index c7d671a7d9a1..07d2d19ab5e9 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -145,7 +145,7 @@ SYSCALL_SPU(setfsuid) SYSCALL_SPU(setfsgid) SYSCALL_SPU(llseek) COMPAT_SYS_SPU(getdents) -SYSX_SPU(sys_select,ppc32_select,ppc_select) +SYSX_SPU(sys_select,ppc32_select,sys_select) SYSCALL_SPU(flock) SYSCALL_SPU(msync) COMPAT_SYS_SPU(readv) diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index b23664a0b86c..c002b0410219 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -42,10 +42,11 @@ obj-$(CONFIG_ALTIVEC) += vecemu.o obj-$(CONFIG_PPC_970_NAP) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o obj-$(CONFIG_PPC_CLOCK) += clock.o -procfs-$(CONFIG_PPC64) := proc_ppc64.o +procfs-y := proc_powerpc.o obj-$(CONFIG_PROC_FS) += $(procfs-y) rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y) +obj-$(CONFIG_PPC_RTAS_DAEMON) += rtasd.o obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_LPARCFG) += lparcfg.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 0812b0f414bb..a6c2b63227b3 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -190,6 +190,11 @@ int main(void) DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset)); DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save)); +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER + DEFINE(PACA_KVM_IN_GUEST, offsetof(struct paca_struct, kvm_in_guest)); + DEFINE(PACA_KVM_SLB, offsetof(struct paca_struct, kvm_slb)); + DEFINE(PACA_KVM_SLB_MAX, offsetof(struct paca_struct, kvm_slb_max)); +#endif #endif /* CONFIG_PPC64 */ /* RTAS */ @@ -398,14 +403,24 @@ int main(void) DEFINE(VCPU_LAST_INST, offsetof(struct kvm_vcpu, arch.last_inst)); DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear)); DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr)); + + /* book3s_64 */ +#ifdef CONFIG_PPC64 + DEFINE(VCPU_FAULT_DSISR, offsetof(struct kvm_vcpu, arch.fault_dsisr)); + DEFINE(VCPU_HOST_RETIP, offsetof(struct kvm_vcpu, arch.host_retip)); + DEFINE(VCPU_HOST_R2, offsetof(struct kvm_vcpu, arch.host_r2)); + DEFINE(VCPU_HOST_MSR, offsetof(struct kvm_vcpu, arch.host_msr)); + DEFINE(VCPU_SHADOW_MSR, offsetof(struct kvm_vcpu, arch.shadow_msr)); + DEFINE(VCPU_TRAMPOLINE_LOWMEM, offsetof(struct kvm_vcpu, arch.trampoline_lowmem)); + DEFINE(VCPU_TRAMPOLINE_ENTER, offsetof(struct kvm_vcpu, arch.trampoline_enter)); + DEFINE(VCPU_HIGHMEM_HANDLER, offsetof(struct kvm_vcpu, arch.highmem_handler)); + DEFINE(VCPU_HFLAGS, offsetof(struct kvm_vcpu, arch.hflags)); +#endif #endif #ifdef CONFIG_44x DEFINE(PGD_T_LOG2, PGD_T_LOG2); DEFINE(PTE_T_LOG2, PTE_T_LOG2); #endif -#ifdef CONFIG_FSL_BOOKE - DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam)); -#endif #ifdef CONFIG_KVM_EXIT_TIMING DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu, diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 0a8439aafdd1..6f4613dd05ef 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -373,7 +373,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs) hard_irq_disable(); for_each_irq(i) { - struct irq_desc *desc = irq_desc + i; + struct irq_desc *desc = irq_to_desc(i); if (desc->status & IRQ_INPROGRESS) desc->chip->eoi(i); diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index e96cbbd9b449..59c928564a03 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -21,7 +21,6 @@ #include <asm/dma.h> #include <asm/abs_addr.h> -int swiotlb __read_mostly; unsigned int ppc_swiotlb_enable; /* diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index c7eb4e0eb86c..e3be98ffe2a7 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -41,6 +41,7 @@ __start_interrupts: . = 0x200 _machine_check_pSeries: HMT_MEDIUM + DO_KVM 0x200 mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) @@ -48,6 +49,7 @@ _machine_check_pSeries: .globl data_access_pSeries data_access_pSeries: HMT_MEDIUM + DO_KVM 0x300 mtspr SPRN_SPRG_SCRATCH0,r13 BEGIN_FTR_SECTION mfspr r13,SPRN_SPRG_PACA @@ -77,6 +79,7 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_SLB) .globl data_access_slb_pSeries data_access_slb_pSeries: HMT_MEDIUM + DO_KVM 0x380 mtspr SPRN_SPRG_SCRATCH0,r13 mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) @@ -115,6 +118,7 @@ data_access_slb_pSeries: .globl instruction_access_slb_pSeries instruction_access_slb_pSeries: HMT_MEDIUM + DO_KVM 0x480 mtspr SPRN_SPRG_SCRATCH0,r13 mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ std r3,PACA_EXSLB+EX_R3(r13) @@ -154,6 +158,7 @@ instruction_access_slb_pSeries: .globl system_call_pSeries system_call_pSeries: HMT_MEDIUM + DO_KVM 0xc00 BEGIN_FTR_SECTION cmpdi r0,0x1ebe beq- 1f @@ -187,14 +192,17 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE) */ performance_monitor_pSeries_1: . = 0xf00 + DO_KVM 0xf00 b performance_monitor_pSeries altivec_unavailable_pSeries_1: . = 0xf20 + DO_KVM 0xf20 b altivec_unavailable_pSeries vsx_unavailable_pSeries_1: . = 0xf40 + DO_KVM 0xf40 b vsx_unavailable_pSeries #ifdef CONFIG_CBE_RAS diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index c38afdb45d7b..925807488022 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -37,6 +37,7 @@ #include <asm/firmware.h> #include <asm/page_64.h> #include <asm/irqflags.h> +#include <asm/kvm_book3s_64_asm.h> /* The physical memory is layed out such that the secondary processor * spin code sits at 0x0000...0x00ff. On server, the vectors follow @@ -165,6 +166,12 @@ exception_marker: #include "exceptions-64s.S" #endif +/* KVM trampoline code needs to be close to the interrupt handlers */ + +#ifdef CONFIG_KVM_BOOK3S_64_HANDLER +#include "../kvm/book3s_64_rmhandlers.S" +#endif + _GLOBAL(generic_secondary_thread_init) mr r24,r3 diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index 6ded19d01891..678f98cd5e64 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -206,6 +206,8 @@ MachineCheck: EXCEPTION_PROLOG mfspr r4,SPRN_DAR stw r4,_DAR(r11) + li r5,0x00f0 + mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */ mfspr r5,SPRN_DSISR stw r5,_DSISR(r11) addi r3,r1,STACK_FRAME_OVERHEAD @@ -222,6 +224,8 @@ DataAccess: stw r10,_DSISR(r11) mr r5,r10 mfspr r4,SPRN_DAR + li r10,0x00f0 + mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */ EXC_XFER_EE_LITE(0x300, handle_page_fault) /* Instruction access exception. @@ -244,6 +248,8 @@ Alignment: EXCEPTION_PROLOG mfspr r4,SPRN_DAR stw r4,_DAR(r11) + li r5,0x00f0 + mtspr SPRN_DAR,r5 /* Tag DAR, to be used in DTLB Error */ mfspr r5,SPRN_DSISR stw r5,_DSISR(r11) addi r3,r1,STACK_FRAME_OVERHEAD @@ -333,26 +339,20 @@ InstructionTLBMiss: mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ lwz r10, 0(r11) /* Get the pte */ -#ifdef CONFIG_SWAP - /* do not set the _PAGE_ACCESSED bit of a non-present page */ - andi. r11, r10, _PAGE_PRESENT - beq 4f - ori r10, r10, _PAGE_ACCESSED - mfspr r11, SPRN_MD_TWC /* get the pte address again */ - stw r10, 0(r11) -4: -#else - ori r10, r10, _PAGE_ACCESSED - stw r10, 0(r11) -#endif + andi. r11, r10, _PAGE_ACCESSED | _PAGE_PRESENT + cmpwi cr0, r11, _PAGE_ACCESSED | _PAGE_PRESENT + bne- cr0, 2f + + /* Clear PP lsb, 0x400 */ + rlwinm r10, r10, 0, 22, 20 /* The Linux PTE won't go exactly into the MMU TLB. - * Software indicator bits 21, 22 and 28 must be clear. + * Software indicator bits 22 and 28 must be clear. * Software indicator bits 24, 25, 26, and 27 must be * set. All other Linux PTE bits control the behavior * of the MMU. */ -2: li r11, 0x00f0 + li r11, 0x00f0 rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */ DO_8xx_CPU6(0x2d80, r3) mtspr SPRN_MI_RPN, r10 /* Update TLB entry */ @@ -365,6 +365,22 @@ InstructionTLBMiss: lwz r3, 8(r0) #endif rfi +2: + mfspr r11, SPRN_SRR1 + /* clear all error bits as TLB Miss + * sets a few unconditionally + */ + rlwinm r11, r11, 0, 0xffff + mtspr SPRN_SRR1, r11 + + mfspr r10, SPRN_M_TW /* Restore registers */ + lwz r11, 0(r0) + mtcr r11 + lwz r11, 4(r0) +#ifdef CONFIG_8xx_CPU6 + lwz r3, 8(r0) +#endif + b InstructionAccess . = 0x1200 DataStoreTLBMiss: @@ -406,29 +422,45 @@ DataStoreTLBMiss: * above. */ rlwimi r11, r10, 0, 27, 27 + /* Insert the WriteThru flag into the TWC from the Linux PTE. + * It is bit 25 in the Linux PTE and bit 30 in the TWC + */ + rlwimi r11, r10, 32-5, 30, 30 DO_8xx_CPU6(0x3b80, r3) mtspr SPRN_MD_TWC, r11 -#ifdef CONFIG_SWAP - /* do not set the _PAGE_ACCESSED bit of a non-present page */ - andi. r11, r10, _PAGE_PRESENT - beq 4f - ori r10, r10, _PAGE_ACCESSED -4: - /* and update pte in table */ -#else - ori r10, r10, _PAGE_ACCESSED -#endif - mfspr r11, SPRN_MD_TWC /* get the pte address again */ - stw r10, 0(r11) + /* Both _PAGE_ACCESSED and _PAGE_PRESENT has to be set. + * We also need to know if the insn is a load/store, so: + * Clear _PAGE_PRESENT and load that which will + * trap into DTLB Error with store bit set accordinly. + */ + /* PRESENT=0x1, ACCESSED=0x20 + * r11 = ((r10 & PRESENT) & ((r10 & ACCESSED) >> 5)); + * r10 = (r10 & ~PRESENT) | r11; + */ + rlwinm r11, r10, 32-5, _PAGE_PRESENT + and r11, r11, r10 + rlwimi r10, r11, 0, _PAGE_PRESENT + + /* Honour kernel RO, User NA */ + /* 0x200 == Extended encoding, bit 22 */ + /* r11 = (r10 & _PAGE_USER) >> 2 */ + rlwinm r11, r10, 32-2, 0x200 + or r10, r11, r10 + /* r11 = (r10 & _PAGE_RW) >> 1 */ + rlwinm r11, r10, 32-1, 0x200 + or r10, r11, r10 + /* invert RW and 0x200 bits */ + xori r10, r10, _PAGE_RW | 0x200 /* The Linux PTE won't go exactly into the MMU TLB. - * Software indicator bits 21, 22 and 28 must be clear. + * Software indicator bits 22 and 28 must be clear. * Software indicator bits 24, 25, 26, and 27 must be * set. All other Linux PTE bits control the behavior * of the MMU. */ 2: li r11, 0x00f0 + mtspr SPRN_DAR,r11 /* Tag DAR */ rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */ DO_8xx_CPU6(0x3d80, r3) mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ @@ -469,97 +501,10 @@ DataTLBError: stw r10, 0(r0) stw r11, 4(r0) - /* First, make sure this was a store operation. - */ - mfspr r10, SPRN_DSISR - andis. r11, r10, 0x0200 /* If set, indicates store op */ - beq 2f - - /* The EA of a data TLB miss is automatically stored in the MD_EPN - * register. The EA of a data TLB error is automatically stored in - * the DAR, but not the MD_EPN register. We must copy the 20 most - * significant bits of the EA from the DAR to MD_EPN before we - * start walking the page tables. We also need to copy the CASID - * value from the M_CASID register. - * Addendum: The EA of a data TLB error is _supposed_ to be stored - * in DAR, but it seems that this doesn't happen in some cases, such - * as when the error is due to a dcbi instruction to a page with a - * TLB that doesn't have the changed bit set. In such cases, there - * does not appear to be any way to recover the EA of the error - * since it is neither in DAR nor MD_EPN. As a workaround, the - * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs - * are initialized in mapin_ram(). This will avoid the problem, - * assuming we only use the dcbi instruction on kernel addresses. - */ mfspr r10, SPRN_DAR - rlwinm r11, r10, 0, 0, 19 - ori r11, r11, MD_EVALID - mfspr r10, SPRN_M_CASID - rlwimi r11, r10, 0, 28, 31 - DO_8xx_CPU6(0x3780, r3) - mtspr SPRN_MD_EPN, r11 - - mfspr r10, SPRN_M_TWB /* Get level 1 table entry address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - andi. r11, r10, 0x0800 - beq 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - rlwimi r10, r11, 0, 2, 19 -3: - lwz r11, 0(r10) /* Get the level 1 entry */ - rlwinm. r10, r11,0,0,19 /* Extract page descriptor page address */ - beq 2f /* If zero, bail */ - - /* We have a pte table, so fetch the pte from the table. - */ - ori r11, r11, 1 /* Set valid bit in physical L2 page */ - DO_8xx_CPU6(0x3b80, r3) - mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ - mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ - lwz r10, 0(r11) /* Get the pte */ - - andi. r11, r10, _PAGE_RW /* Is it writeable? */ - beq 2f /* Bail out if not */ - - /* Update 'changed', among others. - */ -#ifdef CONFIG_SWAP - ori r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE - /* do not set the _PAGE_ACCESSED bit of a non-present page */ - andi. r11, r10, _PAGE_PRESENT - beq 4f - ori r10, r10, _PAGE_ACCESSED -4: -#else - ori r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE -#endif - mfspr r11, SPRN_MD_TWC /* Get pte address again */ - stw r10, 0(r11) /* and update pte in table */ - - /* The Linux PTE won't go exactly into the MMU TLB. - * Software indicator bits 21, 22 and 28 must be clear. - * Software indicator bits 24, 25, 26, and 27 must be - * set. All other Linux PTE bits control the behavior - * of the MMU. - */ - li r11, 0x00f0 - rlwimi r10, r11, 0, 24, 28 /* Set 24-27, clear 28 */ - DO_8xx_CPU6(0x3d80, r3) - mtspr SPRN_MD_RPN, r10 /* Update TLB entry */ - - mfspr r10, SPRN_M_TW /* Restore registers */ - lwz r11, 0(r0) - mtcr r11 - lwz r11, 4(r0) -#ifdef CONFIG_8xx_CPU6 - lwz r3, 8(r0) -#endif - rfi -2: + cmpwi cr0, r10, 0x00f0 + beq- FixupDAR /* must be a buggy dcbX, icbi insn. */ +DARFixed:/* Return from dcbx instruction bug workaround, r10 holds value of DAR */ mfspr r10, SPRN_M_TW /* Restore registers */ lwz r11, 0(r0) mtcr r11 @@ -588,6 +533,140 @@ DataTLBError: . = 0x2000 +/* This is the procedure to calculate the data EA for buggy dcbx,dcbi instructions + * by decoding the registers used by the dcbx instruction and adding them. + * DAR is set to the calculated address and r10 also holds the EA on exit. + */ + /* define if you don't want to use self modifying code */ +#define NO_SELF_MODIFYING_CODE +FixupDAR:/* Entry point for dcbx workaround. */ + /* fetch instruction from memory. */ + mfspr r10, SPRN_SRR0 + DO_8xx_CPU6(0x3780, r3) + mtspr SPRN_MD_EPN, r10 + mfspr r11, SPRN_M_TWB /* Get level 1 table entry address */ + cmplwi cr0, r11, 0x0800 + blt- 3f /* Branch if user space */ + lis r11, (swapper_pg_dir-PAGE_OFFSET)@h + ori r11, r11, (swapper_pg_dir-PAGE_OFFSET)@l + rlwimi r11, r10, 32-20, 0xffc /* r11 = r11&~0xffc|(r10>>20)&0xffc */ +3: lwz r11, 0(r11) /* Get the level 1 entry */ + DO_8xx_CPU6(0x3b80, r3) + mtspr SPRN_MD_TWC, r11 /* Load pte table base address */ + mfspr r11, SPRN_MD_TWC /* ....and get the pte address */ + lwz r11, 0(r11) /* Get the pte */ + /* concat physical page address(r11) and page offset(r10) */ + rlwimi r11, r10, 0, 20, 31 + lwz r11,0(r11) +/* Check if it really is a dcbx instruction. */ +/* dcbt and dcbtst does not generate DTLB Misses/Errors, + * no need to include them here */ + srwi r10, r11, 26 /* check if major OP code is 31 */ + cmpwi cr0, r10, 31 + bne- 141f + rlwinm r10, r11, 0, 21, 30 + cmpwi cr0, r10, 2028 /* Is dcbz? */ + beq+ 142f + cmpwi cr0, r10, 940 /* Is dcbi? */ + beq+ 142f + cmpwi cr0, r10, 108 /* Is dcbst? */ + beq+ 144f /* Fix up store bit! */ + cmpwi cr0, r10, 172 /* Is dcbf? */ + beq+ 142f + cmpwi cr0, r10, 1964 /* Is icbi? */ + beq+ 142f +141: mfspr r10, SPRN_DAR /* r10 must hold DAR at exit */ + b DARFixed /* Nope, go back to normal TLB processing */ + +144: mfspr r10, SPRN_DSISR + rlwinm r10, r10,0,7,5 /* Clear store bit for buggy dcbst insn */ + mtspr SPRN_DSISR, r10 +142: /* continue, it was a dcbx, dcbi instruction. */ +#ifdef CONFIG_8xx_CPU6 + lwz r3, 8(r0) /* restore r3 from memory */ +#endif +#ifndef NO_SELF_MODIFYING_CODE + andis. r10,r11,0x1f /* test if reg RA is r0 */ + li r10,modified_instr@l + dcbtst r0,r10 /* touch for store */ + rlwinm r11,r11,0,0,20 /* Zero lower 10 bits */ + oris r11,r11,640 /* Transform instr. to a "add r10,RA,RB" */ + ori r11,r11,532 + stw r11,0(r10) /* store add/and instruction */ + dcbf 0,r10 /* flush new instr. to memory. */ + icbi 0,r10 /* invalidate instr. cache line */ + lwz r11, 4(r0) /* restore r11 from memory */ + mfspr r10, SPRN_M_TW /* restore r10 from M_TW */ + isync /* Wait until new instr is loaded from memory */ +modified_instr: + .space 4 /* this is where the add instr. is stored */ + bne+ 143f + subf r10,r0,r10 /* r10=r10-r0, only if reg RA is r0 */ +143: mtdar r10 /* store faulting EA in DAR */ + b DARFixed /* Go back to normal TLB handling */ +#else + mfctr r10 + mtdar r10 /* save ctr reg in DAR */ + rlwinm r10, r11, 24, 24, 28 /* offset into jump table for reg RB */ + addi r10, r10, 150f@l /* add start of table */ + mtctr r10 /* load ctr with jump address */ + xor r10, r10, r10 /* sum starts at zero */ + bctr /* jump into table */ +150: + add r10, r10, r0 ;b 151f + add r10, r10, r1 ;b 151f + add r10, r10, r2 ;b 151f + add r10, r10, r3 ;b 151f + add r10, r10, r4 ;b 151f + add r10, r10, r5 ;b 151f + add r10, r10, r6 ;b 151f + add r10, r10, r7 ;b 151f + add r10, r10, r8 ;b 151f + add r10, r10, r9 ;b 151f + mtctr r11 ;b 154f /* r10 needs special handling */ + mtctr r11 ;b 153f /* r11 needs special handling */ + add r10, r10, r12 ;b 151f + add r10, r10, r13 ;b 151f + add r10, r10, r14 ;b 151f + add r10, r10, r15 ;b 151f + add r10, r10, r16 ;b 151f + add r10, r10, r17 ;b 151f + add r10, r10, r18 ;b 151f + add r10, r10, r19 ;b 151f + add r10, r10, r20 ;b 151f + add r10, r10, r21 ;b 151f + add r10, r10, r22 ;b 151f + add r10, r10, r23 ;b 151f + add r10, r10, r24 ;b 151f + add r10, r10, r25 ;b 151f + add r10, r10, r26 ;b 151f + add r10, r10, r27 ;b 151f + add r10, r10, r28 ;b 151f + add r10, r10, r29 ;b 151f + add r10, r10, r30 ;b 151f + add r10, r10, r31 +151: + rlwinm. r11,r11,19,24,28 /* offset into jump table for reg RA */ + beq 152f /* if reg RA is zero, don't add it */ + addi r11, r11, 150b@l /* add start of table */ + mtctr r11 /* load ctr with jump address */ + rlwinm r11,r11,0,16,10 /* make sure we don't execute this more than once */ + bctr /* jump into table */ +152: + mfdar r11 + mtctr r11 /* restore ctr reg from DAR */ + mtdar r10 /* save fault EA to DAR */ + b DARFixed /* Go back to normal TLB handling */ + + /* special handling for r10,r11 since these are modified already */ +153: lwz r11, 4(r0) /* load r11 from memory */ + b 155f +154: mfspr r11, SPRN_M_TW /* load r10 from M_TW */ +155: add r10, r10, r11 /* add it */ + mfctr r11 /* restore r11 */ + b 151b +#endif + .globl giveup_fpu giveup_fpu: blr diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 975788ca05d2..7f4bd7f3b6af 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -944,28 +944,6 @@ _GLOBAL(__setup_e500mc_ivors) blr /* - * extern void loadcam_entry(unsigned int index) - * - * Load TLBCAM[index] entry in to the L2 CAM MMU - */ -_GLOBAL(loadcam_entry) - lis r4,TLBCAM@ha - addi r4,r4,TLBCAM@l - mulli r5,r3,TLBCAM_SIZE - add r3,r5,r4 - lwz r4,0(r3) - mtspr SPRN_MAS0,r4 - lwz r4,4(r3) - mtspr SPRN_MAS1,r4 - lwz r4,8(r3) - mtspr SPRN_MAS2,r4 - lwz r4,12(r3) - mtspr SPRN_MAS3,r4 - tlbwe - isync - blr - -/* * extern void giveup_altivec(struct task_struct *prev) * * The e500 core does not have an AltiVec unit. diff --git a/arch/powerpc/kernel/io.c b/arch/powerpc/kernel/io.c index 1882bf419fa6..8dc7547c2377 100644 --- a/arch/powerpc/kernel/io.c +++ b/arch/powerpc/kernel/io.c @@ -161,7 +161,7 @@ void _memcpy_fromio(void *dest, const volatile void __iomem *src, dest++; n--; } - while(n > 4) { + while(n >= 4) { *((u32 *)dest) = *((volatile u32 *)vsrc); eieio(); vsrc += 4; @@ -190,7 +190,7 @@ void _memcpy_toio(volatile void __iomem *dest, const void *src, unsigned long n) vdest++; n--; } - while(n > 4) { + while(n >= 4) { *((volatile u32 *)vdest) = *((volatile u32 *)src); src += 4; vdest += 4; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 02a334662cc0..f6dca4f4b295 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -87,7 +87,10 @@ extern int tau_interrupts(int); #endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 + +#ifndef CONFIG_SPARSE_IRQ EXPORT_SYMBOL(irq_desc); +#endif int distribute_irqs = 1; @@ -189,33 +192,7 @@ int show_interrupts(struct seq_file *p, void *v) for_each_online_cpu(j) seq_printf(p, "CPU%d ", j); seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - desc = get_irq_desc(i); - spin_lock_irqsave(&desc->lock, flags); - action = desc->action; - if (!action || !action->handler) - goto skip; - seq_printf(p, "%3d: ", i); -#ifdef CONFIG_SMP - for_each_online_cpu(j) - seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); -#else - seq_printf(p, "%10u ", kstat_irqs(i)); -#endif /* CONFIG_SMP */ - if (desc->chip) - seq_printf(p, " %s ", desc->chip->typename); - else - seq_puts(p, " None "); - seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s", action->name); - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) { + } else if (i == nr_irqs) { #if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT) if (tau_initialized){ seq_puts(p, "TAU: "); @@ -225,30 +202,68 @@ skip: } #endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/ seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); + + return 0; } + + desc = irq_to_desc(i); + if (!desc) + return 0; + + spin_lock_irqsave(&desc->lock, flags); + + action = desc->action; + if (!action || !action->handler) + goto skip; + + seq_printf(p, "%3d: ", i); +#ifdef CONFIG_SMP + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); +#else + seq_printf(p, "%10u ", kstat_irqs(i)); +#endif /* CONFIG_SMP */ + + if (desc->chip) + seq_printf(p, " %s ", desc->chip->name); + else + seq_puts(p, " None "); + + seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); + seq_printf(p, " %s", action->name); + + for (action = action->next; action; action = action->next) + seq_printf(p, ", %s", action->name); + seq_putc(p, '\n'); + +skip: + spin_unlock_irqrestore(&desc->lock, flags); + return 0; } #ifdef CONFIG_HOTPLUG_CPU void fixup_irqs(cpumask_t map) { + struct irq_desc *desc; unsigned int irq; static int warned; for_each_irq(irq) { cpumask_t mask; - if (irq_desc[irq].status & IRQ_PER_CPU) + desc = irq_to_desc(irq); + if (desc && desc->status & IRQ_PER_CPU) continue; - cpumask_and(&mask, irq_desc[irq].affinity, &map); + cpumask_and(&mask, desc->affinity, &map); if (any_online_cpu(mask) == NR_CPUS) { printk("Breaking affinity for irq %i\n", irq); mask = map; } - if (irq_desc[irq].chip->set_affinity) - irq_desc[irq].chip->set_affinity(irq, &mask); - else if (irq_desc[irq].action && !(warned++)) + if (desc->chip->set_affinity) + desc->chip->set_affinity(irq, &mask); + else if (desc->action && !(warned++)) printk("Cannot set affinity for irq %i\n", irq); } @@ -275,7 +290,7 @@ static inline void handle_one_irq(unsigned int irq) return; } - desc = irq_desc + irq; + desc = irq_to_desc(irq); saved_sp_limit = current->thread.ksp_limit; irqtp->task = curtp->task; @@ -541,7 +556,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node, smp_wmb(); /* Clear norequest flags */ - get_irq_desc(i)->status &= ~IRQ_NOREQUEST; + irq_to_desc(i)->status &= ~IRQ_NOREQUEST; /* Legacy flags are left to default at this point, * one can then use irq_create_mapping() to @@ -607,8 +622,16 @@ void irq_set_virq_count(unsigned int count) static int irq_setup_virq(struct irq_host *host, unsigned int virq, irq_hw_number_t hwirq) { + struct irq_desc *desc; + + desc = irq_to_desc_alloc_node(virq, 0); + if (!desc) { + pr_debug("irq: -> allocating desc failed\n"); + goto error; + } + /* Clear IRQ_NOREQUEST flag */ - get_irq_desc(virq)->status &= ~IRQ_NOREQUEST; + desc->status &= ~IRQ_NOREQUEST; /* map it */ smp_wmb(); @@ -617,11 +640,14 @@ static int irq_setup_virq(struct irq_host *host, unsigned int virq, if (host->ops->map(host, virq, hwirq)) { pr_debug("irq: -> mapping failed, freeing\n"); - irq_free_virt(virq, 1); - return -1; + goto error; } return 0; + +error: + irq_free_virt(virq, 1); + return -1; } unsigned int irq_create_direct_mapping(struct irq_host *host) @@ -705,7 +731,7 @@ unsigned int irq_create_mapping(struct irq_host *host, EXPORT_SYMBOL_GPL(irq_create_mapping); unsigned int irq_create_of_mapping(struct device_node *controller, - u32 *intspec, unsigned int intsize) + const u32 *intspec, unsigned int intsize) { struct irq_host *host; irq_hw_number_t hwirq; @@ -738,7 +764,7 @@ unsigned int irq_create_of_mapping(struct device_node *controller, /* Set type if specified and different than the current one */ if (type != IRQ_TYPE_NONE && - type != (get_irq_desc(virq)->status & IRQF_TRIGGER_MASK)) + type != (irq_to_desc(virq)->status & IRQF_TRIGGER_MASK)) set_irq_type(virq, type); return virq; } @@ -810,7 +836,7 @@ void irq_dispose_mapping(unsigned int virq) irq_map[virq].hwirq = host->inval_irq; /* Set some flags */ - get_irq_desc(virq)->status |= IRQ_NOREQUEST; + irq_to_desc(virq)->status |= IRQ_NOREQUEST; /* Free it */ irq_free_virt(virq, 1); @@ -1002,12 +1028,24 @@ void irq_free_virt(unsigned int virq, unsigned int count) spin_unlock_irqrestore(&irq_big_lock, flags); } -void irq_early_init(void) +int arch_early_irq_init(void) { - unsigned int i; + struct irq_desc *desc; + int i; + + for (i = 0; i < NR_IRQS; i++) { + desc = irq_to_desc(i); + if (desc) + desc->status |= IRQ_NOREQUEST; + } - for (i = 0; i < NR_IRQS; i++) - get_irq_desc(i)->status |= IRQ_NOREQUEST; + return 0; +} + +int arch_init_chip_data(struct irq_desc *desc, int node) +{ + desc->status |= IRQ_NOREQUEST; + return 0; } /* We need to create the radix trees late */ @@ -1069,16 +1107,19 @@ static int virq_debug_show(struct seq_file *m, void *private) seq_printf(m, "%-5s %-7s %-15s %s\n", "virq", "hwirq", "chip name", "host name"); - for (i = 1; i < NR_IRQS; i++) { - desc = get_irq_desc(i); + for (i = 1; i < nr_irqs; i++) { + desc = irq_to_desc(i); + if (!desc) + continue; + spin_lock_irqsave(&desc->lock, flags); if (desc->action && desc->action->handler) { seq_printf(m, "%5d ", i); seq_printf(m, "0x%05lx ", virq_to_hw(i)); - if (desc->chip && desc->chip->typename) - p = desc->chip->typename; + if (desc->chip && desc->chip->name) + p = desc->chip->name; else p = none; seq_printf(m, "%-15s ", p); diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index ed0ac4e4b8d8..79a00bb9c64c 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -781,9 +781,9 @@ static int __init lparcfg_init(void) !firmware_has_feature(FW_FEATURE_ISERIES)) mode |= S_IWUSR; - ent = proc_create("ppc64/lparcfg", mode, NULL, &lparcfg_fops); + ent = proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_fops); if (!ent) { - printk(KERN_ERR "Failed to create ppc64/lparcfg\n"); + printk(KERN_ERR "Failed to create powerpc/lparcfg\n"); return -EIO; } diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index da9c0c4c10f3..8649f536f8df 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -502,15 +502,7 @@ _GLOBAL(clear_pages) li r0,PAGE_SIZE/L1_CACHE_BYTES slw r0,r0,r4 mtctr r0 -#ifdef CONFIG_8xx - li r4, 0 -1: stw r4, 0(r3) - stw r4, 4(r3) - stw r4, 8(r3) - stw r4, 12(r3) -#else 1: dcbz 0,r3 -#endif addi r3,r3,L1_CACHE_BYTES bdnz 1b blr @@ -535,15 +527,6 @@ _GLOBAL(copy_page) addi r3,r3,-4 addi r4,r4,-4 -#ifdef CONFIG_8xx - /* don't use prefetch on 8xx */ - li r0,4096/L1_CACHE_BYTES - mtctr r0 -1: COPY_16_BYTES - bdnz 1b - blr - -#else /* not 8xx, we can prefetch */ li r5,4 #if MAX_COPY_PREFETCH > 1 @@ -584,7 +567,6 @@ _GLOBAL(copy_page) li r0,MAX_COPY_PREFETCH li r11,4 b 2b -#endif /* CONFIG_8xx */ /* * void atomic_clear_mask(atomic_t mask, atomic_t *addr) diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index 0ed31f220482..ad461e735aec 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -139,8 +139,8 @@ out: } -static int dev_nvram_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static long dev_nvram_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) { switch(cmd) { #ifdef CONFIG_PPC_PMAC @@ -169,11 +169,11 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, } const struct file_operations nvram_fops = { - .owner = THIS_MODULE, - .llseek = dev_nvram_llseek, - .read = dev_nvram_read, - .write = dev_nvram_write, - .ioctl = dev_nvram_ioctl, + .owner = THIS_MODULE, + .llseek = dev_nvram_llseek, + .read = dev_nvram_read, + .write = dev_nvram_write, + .unlocked_ioctl = dev_nvram_ioctl, }; static struct miscdevice nvram_dev = { @@ -184,7 +184,7 @@ static struct miscdevice nvram_dev = { #ifdef DEBUG_NVRAM -static void nvram_print_partitions(char * label) +static void __init nvram_print_partitions(char * label) { struct list_head * p; struct nvram_partition * tmp_part; @@ -202,7 +202,7 @@ static void nvram_print_partitions(char * label) #endif -static int nvram_write_header(struct nvram_partition * part) +static int __init nvram_write_header(struct nvram_partition * part) { loff_t tmp_index; int rc; @@ -214,7 +214,7 @@ static int nvram_write_header(struct nvram_partition * part) } -static unsigned char nvram_checksum(struct nvram_header *p) +static unsigned char __init nvram_checksum(struct nvram_header *p) { unsigned int c_sum, c_sum2; unsigned short *sp = (unsigned short *)p->name; /* assume 6 shorts */ @@ -228,32 +228,7 @@ static unsigned char nvram_checksum(struct nvram_header *p) return c_sum; } - -/* - * Find an nvram partition, sig can be 0 for any - * partition or name can be NULL for any name, else - * tries to match both - */ -struct nvram_partition *nvram_find_partition(int sig, const char *name) -{ - struct nvram_partition * part; - struct list_head * p; - - list_for_each(p, &nvram_part->partition) { - part = list_entry(p, struct nvram_partition, partition); - - if (sig && part->header.signature != sig) - continue; - if (name && 0 != strncmp(name, part->header.name, 12)) - continue; - return part; - } - return NULL; -} -EXPORT_SYMBOL(nvram_find_partition); - - -static int nvram_remove_os_partition(void) +static int __init nvram_remove_os_partition(void) { struct list_head *i; struct list_head *j; @@ -319,7 +294,7 @@ static int nvram_remove_os_partition(void) * Will create a partition starting at the first free * space found if space has enough room. */ -static int nvram_create_os_partition(void) +static int __init nvram_create_os_partition(void) { struct nvram_partition *part; struct nvram_partition *new_part; @@ -422,7 +397,7 @@ static int nvram_create_os_partition(void) * 5.) If the max chunk cannot be allocated then try finding a chunk * that will satisfy the minum needed (NVRAM_MIN_REQ). */ -static int nvram_setup_partition(void) +static int __init nvram_setup_partition(void) { struct list_head * p; struct nvram_partition * part; @@ -480,7 +455,7 @@ static int nvram_setup_partition(void) } -static int nvram_scan_partitions(void) +static int __init nvram_scan_partitions(void) { loff_t cur_index = 0; struct nvram_header phead; @@ -706,6 +681,9 @@ int nvram_clear_error_log(void) int clear_word = ERR_FLAG_ALREADY_LOGGED; int rc; + if (nvram_error_log_index == -1) + return -1; + tmp_index = nvram_error_log_index; rc = ppc_md.nvram_write((char *)&clear_word, sizeof(int), &tmp_index); diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/kernel/perf_callchain.c index 0a03cf70d247..a3c11cac3d71 100644 --- a/arch/powerpc/kernel/perf_callchain.c +++ b/arch/powerpc/kernel/perf_callchain.c @@ -119,13 +119,6 @@ static void perf_callchain_kernel(struct pt_regs *regs, } #ifdef CONFIG_PPC64 - -#ifdef CONFIG_HUGETLB_PAGE -#define is_huge_psize(pagesize) (HPAGE_SHIFT && mmu_huge_psizes[pagesize]) -#else -#define is_huge_psize(pagesize) 0 -#endif - /* * On 64-bit we don't want to invoke hash_page on user addresses from * interrupt context, so if the access faults, we read the page tables @@ -135,7 +128,7 @@ static int read_user_stack_slow(void __user *ptr, void *ret, int nb) { pgd_t *pgdir; pte_t *ptep, pte; - int pagesize; + unsigned shift; unsigned long addr = (unsigned long) ptr; unsigned long offset; unsigned long pfn; @@ -145,17 +138,14 @@ static int read_user_stack_slow(void __user *ptr, void *ret, int nb) if (!pgdir) return -EFAULT; - pagesize = get_slice_psize(current->mm, addr); + ptep = find_linux_pte_or_hugepte(pgdir, addr, &shift); + if (!shift) + shift = PAGE_SHIFT; /* align address to page boundary */ - offset = addr & ((1ul << mmu_psize_defs[pagesize].shift) - 1); + offset = addr & ((1UL << shift) - 1); addr -= offset; - if (is_huge_psize(pagesize)) - ptep = huge_pte_offset(current->mm, addr); - else - ptep = find_linux_pte(pgdir, addr); - if (ptep == NULL) return -EFAULT; pte = *ptep; @@ -497,11 +487,11 @@ static void perf_callchain_user_32(struct pt_regs *regs, * Since we can't get PMU interrupts inside a PMU interrupt handler, * we don't need separate irq and nmi entries here. */ -static DEFINE_PER_CPU(struct perf_callchain_entry, callchain); +static DEFINE_PER_CPU(struct perf_callchain_entry, cpu_perf_callchain); struct perf_callchain_entry *perf_callchain(struct pt_regs *regs) { - struct perf_callchain_entry *entry = &__get_cpu_var(callchain); + struct perf_callchain_entry *entry = &__get_cpu_var(cpu_perf_callchain); entry->nr = 0; diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index c8b27bb4dbde..425451453e96 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -96,8 +96,6 @@ EXPORT_SYMBOL(copy_4K_page); EXPORT_SYMBOL(isa_io_base); EXPORT_SYMBOL(isa_mem_base); EXPORT_SYMBOL(pci_dram_offset); -EXPORT_SYMBOL(pci_alloc_consistent); -EXPORT_SYMBOL(pci_free_consistent); #endif /* CONFIG_PCI */ EXPORT_SYMBOL(start_thread); @@ -162,7 +160,6 @@ EXPORT_SYMBOL(screen_info); #ifdef CONFIG_PPC32 EXPORT_SYMBOL(timer_interrupt); -EXPORT_SYMBOL(irq_desc); EXPORT_SYMBOL(tb_ticks_per_jiffy); EXPORT_SYMBOL(cacheable_memcpy); EXPORT_SYMBOL(cacheable_memzero); diff --git a/arch/powerpc/kernel/proc_ppc64.c b/arch/powerpc/kernel/proc_powerpc.c index c647ddef40dc..1ed3b8d7981e 100644 --- a/arch/powerpc/kernel/proc_ppc64.c +++ b/arch/powerpc/kernel/proc_powerpc.c @@ -28,55 +28,7 @@ #include <asm/uaccess.h> #include <asm/prom.h> -static loff_t page_map_seek( struct file *file, loff_t off, int whence); -static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes, - loff_t *ppos); -static int page_map_mmap( struct file *file, struct vm_area_struct *vma ); - -static const struct file_operations page_map_fops = { - .llseek = page_map_seek, - .read = page_map_read, - .mmap = page_map_mmap -}; - -/* - * Create the ppc64 and ppc64/rtas directories early. This allows us to - * assume that they have been previously created in drivers. - */ -static int __init proc_ppc64_create(void) -{ - struct proc_dir_entry *root; - - root = proc_mkdir("ppc64", NULL); - if (!root) - return 1; - - if (!of_find_node_by_path("/rtas")) - return 0; - - if (!proc_mkdir("rtas", root)) - return 1; - - if (!proc_symlink("rtas", NULL, "ppc64/rtas")) - return 1; - - return 0; -} -core_initcall(proc_ppc64_create); - -static int __init proc_ppc64_init(void) -{ - struct proc_dir_entry *pde; - - pde = proc_create_data("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL, - &page_map_fops, vdso_data); - if (!pde) - return 1; - pde->size = PAGE_SIZE; - - return 0; -} -__initcall(proc_ppc64_init); +#ifdef CONFIG_PPC64 static loff_t page_map_seek( struct file *file, loff_t off, int whence) { @@ -120,3 +72,55 @@ static int page_map_mmap( struct file *file, struct vm_area_struct *vma ) return 0; } +static const struct file_operations page_map_fops = { + .llseek = page_map_seek, + .read = page_map_read, + .mmap = page_map_mmap +}; + + +static int __init proc_ppc64_init(void) +{ + struct proc_dir_entry *pde; + + pde = proc_create_data("powerpc/systemcfg", S_IFREG|S_IRUGO, NULL, + &page_map_fops, vdso_data); + if (!pde) + return 1; + pde->size = PAGE_SIZE; + + return 0; +} +__initcall(proc_ppc64_init); + +#endif /* CONFIG_PPC64 */ + +/* + * Create the ppc64 and ppc64/rtas directories early. This allows us to + * assume that they have been previously created in drivers. + */ +static int __init proc_ppc64_create(void) +{ + struct proc_dir_entry *root; + + root = proc_mkdir("powerpc", NULL); + if (!root) + return 1; + +#ifdef CONFIG_PPC64 + if (!proc_symlink("ppc64", NULL, "powerpc")) + pr_err("Failed to create link /proc/ppc64 -> /proc/powerpc\n"); +#endif + + if (!of_find_node_by_path("/rtas")) + return 0; + + if (!proc_mkdir("rtas", root)) + return 1; + + if (!proc_symlink("rtas", NULL, "powerpc/rtas")) + return 1; + + return 0; +} +core_initcall(proc_ppc64_create); diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 13011a96a977..a85117d5c9a4 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -6,7 +6,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * /proc/ppc64/rtas/firmware_flash interface + * /proc/powerpc/rtas/firmware_flash interface * * This file implements a firmware_flash interface to pump a firmware * image into the kernel. At reboot time rtas_restart() will see the @@ -740,7 +740,7 @@ static int __init rtas_flash_init(void) return 1; } - firmware_flash_pde = create_flash_pde("ppc64/rtas/" + firmware_flash_pde = create_flash_pde("powerpc/rtas/" FIRMWARE_FLASH_NAME, &rtas_flash_operations); if (firmware_flash_pde == NULL) { @@ -754,7 +754,7 @@ static int __init rtas_flash_init(void) if (rc != 0) goto cleanup; - firmware_update_pde = create_flash_pde("ppc64/rtas/" + firmware_update_pde = create_flash_pde("powerpc/rtas/" FIRMWARE_UPDATE_NAME, &rtas_flash_operations); if (firmware_update_pde == NULL) { @@ -768,7 +768,7 @@ static int __init rtas_flash_init(void) if (rc != 0) goto cleanup; - validate_pde = create_flash_pde("ppc64/rtas/" VALIDATE_FLASH_NAME, + validate_pde = create_flash_pde("powerpc/rtas/" VALIDATE_FLASH_NAME, &validate_flash_operations); if (validate_pde == NULL) { rc = -ENOMEM; @@ -781,7 +781,7 @@ static int __init rtas_flash_init(void) if (rc != 0) goto cleanup; - manage_pde = create_flash_pde("ppc64/rtas/" MANAGE_FLASH_NAME, + manage_pde = create_flash_pde("powerpc/rtas/" MANAGE_FLASH_NAME, &manage_flash_operations); if (manage_pde == NULL) { rc = -ENOMEM; diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/kernel/rtasd.c index b3cbac855924..2e4832ab2108 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/kernel/rtasd.c @@ -39,6 +39,7 @@ static unsigned long rtas_log_start; static unsigned long rtas_log_size; static int surveillance_timeout = -1; + static unsigned int rtas_error_log_max; static unsigned int rtas_error_log_buffer_max; @@ -213,9 +214,11 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) return; } +#ifdef CONFIG_PPC64 /* Write error to NVRAM */ if (logging_enabled && !(err_type & ERR_FLAG_BOOT)) nvram_write_error_log(buf, len, err_type, error_log_cnt); +#endif /* CONFIG_PPC64 */ /* * rtas errors can occur during boot, and we do want to capture @@ -264,7 +267,6 @@ void pSeries_log_error(char *buf, unsigned int err_type, int fatal) } - static int rtas_log_open(struct inode * inode, struct file * file) { return 0; @@ -300,6 +302,7 @@ static ssize_t rtas_log_read(struct file * file, char __user * buf, return -ENOMEM; spin_lock_irqsave(&rtasd_log_lock, s); + /* if it's 0, then we know we got the last one (the one in NVRAM) */ while (rtas_log_size == 0) { if (file->f_flags & O_NONBLOCK) { @@ -313,7 +316,9 @@ static ssize_t rtas_log_read(struct file * file, char __user * buf, error = -ENODATA; goto out; } +#ifdef CONFIG_PPC64 nvram_clear_error_log(); +#endif /* CONFIG_PPC64 */ spin_unlock_irqrestore(&rtasd_log_lock, s); error = wait_event_interruptible(rtas_log_wait, rtas_log_size); @@ -427,14 +432,11 @@ static void rtas_event_scan(struct work_struct *w) put_online_cpus(); } -static void start_event_scan(void) +#ifdef CONFIG_PPC64 +static void retreive_nvram_error_log(void) { - unsigned int err_type; - int rc; - - printk(KERN_DEBUG "RTAS daemon started\n"); - pr_debug("rtasd: will sleep for %d milliseconds\n", - (30000 / rtas_event_scan_rate)); + unsigned int err_type ; + int rc ; /* See if we have any error stored in NVRAM */ memset(logdata, 0, rtas_error_log_max); @@ -442,12 +444,26 @@ static void start_event_scan(void) &err_type, &error_log_cnt); /* We can use rtas_log_buf now */ logging_enabled = 1; - if (!rc) { if (err_type != ERR_FLAG_ALREADY_LOGGED) { pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0); } } +} +#else /* CONFIG_PPC64 */ +static void retreive_nvram_error_log(void) +{ +} +#endif /* CONFIG_PPC64 */ + +static void start_event_scan(void) +{ + printk(KERN_DEBUG "RTAS daemon started\n"); + pr_debug("rtasd: will sleep for %d milliseconds\n", + (30000 / rtas_event_scan_rate)); + + /* Retreive errors from nvram if any */ + retreive_nvram_error_log(); schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work, event_scan_delay); @@ -457,13 +473,13 @@ static int __init rtas_init(void) { struct proc_dir_entry *entry; - if (!machine_is(pseries)) + if (!machine_is(pseries) && !machine_is(chrp)) return 0; /* No RTAS */ event_scan = rtas_token("event-scan"); if (event_scan == RTAS_UNKNOWN_SERVICE) { - printk(KERN_DEBUG "rtasd: no event-scan on system\n"); + printk(KERN_INFO "rtasd: No event-scan on system\n"); return -ENODEV; } @@ -483,7 +499,7 @@ static int __init rtas_init(void) return -ENOMEM; } - entry = proc_create("ppc64/rtas/error_log", S_IRUSR, NULL, + entry = proc_create("powerpc/rtas/error_log", S_IRUSR, NULL, &proc_rtas_log_operations); if (!entry) printk(KERN_ERR "Failed to create error_log proc entry\n"); @@ -492,11 +508,16 @@ static int __init rtas_init(void) return 0; } +__initcall(rtas_init); static int __init surveillance_setup(char *str) { int i; + /* We only do surveillance on pseries */ + if (!machine_is(pseries)) + return 0; + if (get_option(&str,&i)) { if (i >= 0 && i <= 255) surveillance_timeout = i; @@ -504,6 +525,7 @@ static int __init surveillance_setup(char *str) return 1; } +__setup("surveillance=", surveillance_setup); static int __init rtasmsgs_setup(char *str) { @@ -514,6 +536,4 @@ static int __init rtasmsgs_setup(char *str) return 1; } -__initcall(rtas_init); -__setup("surveillance=", surveillance_setup); __setup("rtasmsgs=", rtasmsgs_setup); diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 845c72ab7357..03dd6a248198 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -157,7 +157,7 @@ extern u32 cpu_temp_both(unsigned long cpu); #endif /* CONFIG_TAU */ #ifdef CONFIG_SMP -DEFINE_PER_CPU(unsigned int, pvr); +DEFINE_PER_CPU(unsigned int, cpu_pvr); #endif static int show_cpuinfo(struct seq_file *m, void *v) @@ -209,7 +209,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) } #ifdef CONFIG_SMP - pvr = per_cpu(pvr, cpu_id); + pvr = per_cpu(cpu_pvr, cpu_id); #else pvr = mfspr(SPRN_PVR); #endif diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index df2c9e932b37..6568406b2a30 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -356,11 +356,6 @@ void __init setup_system(void) */ initialize_cache_info(); - /* - * Initialize irq remapping subsystem - */ - irq_early_init(); - #ifdef CONFIG_PPC_RTAS /* * Initialize RTAS if available diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 9b86a74d2815..a521fb8a40ee 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -218,6 +218,9 @@ void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)) static void stop_this_cpu(void *dummy) { + /* Remove this CPU */ + set_cpu_online(smp_processor_id(), false); + local_irq_disable(); while (1) ; @@ -232,7 +235,7 @@ struct thread_info *current_set[NR_CPUS]; static void __devinit smp_store_cpu_info(int id) { - per_cpu(pvr, id) = mfspr(SPRN_PVR); + per_cpu(cpu_pvr, id) = mfspr(SPRN_PVR); } static void __init smp_create_idle(unsigned int cpu) diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index c04832c4a02e..3370e62e43d4 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -140,7 +140,6 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long off, int shift) { - struct file * file = NULL; unsigned long ret = -EINVAL; if (!arch_validate_prot(prot)) @@ -151,20 +150,8 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len, goto out; off >>= shift; } - - ret = -EBADF; - if (!(flags & MAP_ANONYMOUS)) { - if (!(file = fget(fd))) - goto out; - } - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - down_write(¤t->mm->mmap_sem); - ret = do_mmap_pgoff(file, addr, len, prot, flags, off); - up_write(¤t->mm->mmap_sem); - if (file) - fput(file); + ret = sys_mmap_pgoff(addr, len, prot, flags, fd, off); out: return ret; } diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 956ab33fd73f..e235e52dc4fe 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -461,6 +461,25 @@ static void unregister_cpu_online(unsigned int cpu) cacheinfo_cpu_offline(cpu); } + +#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE +ssize_t arch_cpu_probe(const char *buf, size_t count) +{ + if (ppc_md.cpu_probe) + return ppc_md.cpu_probe(buf, count); + + return -EINVAL; +} + +ssize_t arch_cpu_release(const char *buf, size_t count) +{ + if (ppc_md.cpu_release) + return ppc_md.cpu_release(buf, count); + + return -EINVAL; +} +#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ + #endif /* CONFIG_HOTPLUG_CPU */ static int __cpuinit sysfs_cpu_notify(struct notifier_block *self, diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 674800b242d6..9ba2cc88591d 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -269,6 +269,7 @@ void account_system_vtime(struct task_struct *tsk) per_cpu(cputime_scaled_last_delta, smp_processor_id()) = deltascaled; local_irq_restore(flags); } +EXPORT_SYMBOL_GPL(account_system_vtime); /* * Transfer the user and system times accumulated in the paca diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 9d1f9354d6ca..804f0f30f227 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -198,28 +198,6 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) info.si_code = code; info.si_addr = (void __user *) addr; force_sig_info(signr, &info, current); - - /* - * Init gets no signals that it doesn't have a handler for. - * That's all very well, but if it has caused a synchronous - * exception and we ignore the resulting signal, it will just - * generate the same exception over and over again and we get - * nowhere. Better to kill it and let the kernel panic. - */ - if (is_global_init(current)) { - __sighandler_t handler; - - spin_lock_irq(¤t->sighand->siglock); - handler = current->sighand->action[signr-1].sa.sa_handler; - spin_unlock_irq(¤t->sighand->siglock); - if (handler == SIG_DFL) { - /* init has generated a synchronous exception - and it doesn't have a handler for the signal */ - printk(KERN_CRIT "init has generated signal %d " - "but has no handler for it\n", signr); - do_exit(signr); - } - } } #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S index 67b6916f0e94..fe460482fa68 100644 --- a/arch/powerpc/kernel/vector.S +++ b/arch/powerpc/kernel/vector.S @@ -58,7 +58,7 @@ _GLOBAL(load_up_altivec) * all 1's */ mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 + cmpwi 0,r4,0 bne+ 1f li r4,-1 mtspr SPRN_VRSAVE,r4 diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig index c29926846613..07703f72330e 100644 --- a/arch/powerpc/kvm/Kconfig +++ b/arch/powerpc/kvm/Kconfig @@ -21,6 +21,23 @@ config KVM select PREEMPT_NOTIFIERS select ANON_INODES +config KVM_BOOK3S_64_HANDLER + bool + +config KVM_BOOK3S_64 + tristate "KVM support for PowerPC book3s_64 processors" + depends on EXPERIMENTAL && PPC64 + select KVM + select KVM_BOOK3S_64_HANDLER + ---help--- + Support running unmodified book3s_64 and book3s_32 guest kernels + in virtual machines on book3s_64 host processors. + + This module provides access to the hardware capabilities through + a character device node named /dev/kvm. + + If unsure, say N. + config KVM_440 bool "KVM support for PowerPC 440 processors" depends on EXPERIMENTAL && 44x diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile index 37655fe19f2f..56484d652377 100644 --- a/arch/powerpc/kvm/Makefile +++ b/arch/powerpc/kvm/Makefile @@ -12,26 +12,45 @@ CFLAGS_44x_tlb.o := -I. CFLAGS_e500_tlb.o := -I. CFLAGS_emulate.o := -I. -kvm-objs := $(common-objs-y) powerpc.o emulate.o +common-objs-y += powerpc.o emulate.o obj-$(CONFIG_KVM_EXIT_TIMING) += timing.o -obj-$(CONFIG_KVM) += kvm.o +obj-$(CONFIG_KVM_BOOK3S_64_HANDLER) += book3s_64_exports.o AFLAGS_booke_interrupts.o := -I$(obj) kvm-440-objs := \ + $(common-objs-y) \ booke.o \ booke_emulate.o \ booke_interrupts.o \ 44x.o \ 44x_tlb.o \ 44x_emulate.o -obj-$(CONFIG_KVM_440) += kvm-440.o +kvm-objs-$(CONFIG_KVM_440) := $(kvm-440-objs) kvm-e500-objs := \ + $(common-objs-y) \ booke.o \ booke_emulate.o \ booke_interrupts.o \ e500.o \ e500_tlb.o \ e500_emulate.o -obj-$(CONFIG_KVM_E500) += kvm-e500.o +kvm-objs-$(CONFIG_KVM_E500) := $(kvm-e500-objs) + +kvm-book3s_64-objs := \ + $(common-objs-y) \ + book3s.o \ + book3s_64_emulate.o \ + book3s_64_interrupts.o \ + book3s_64_mmu_host.o \ + book3s_64_mmu.o \ + book3s_32_mmu.o +kvm-objs-$(CONFIG_KVM_BOOK3S_64) := $(kvm-book3s_64-objs) + +kvm-objs := $(kvm-objs-m) $(kvm-objs-y) + +obj-$(CONFIG_KVM_440) += kvm.o +obj-$(CONFIG_KVM_E500) += kvm.o +obj-$(CONFIG_KVM_BOOK3S_64) += kvm.o + diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c new file mode 100644 index 000000000000..3e294bd9b8c6 --- /dev/null +++ b/arch/powerpc/kvm/book3s.c @@ -0,0 +1,974 @@ +/* + * Copyright (C) 2009. SUSE Linux Products GmbH. All rights reserved. + * + * Authors: + * Alexander Graf <agraf@suse.de> + * Kevin Wolf <mail@kevin-wolf.de> + * + * Description: + * This file is derived from arch/powerpc/kvm/44x.c, + * by Hollis Blanchard <hollisb@us.ibm.com>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/kvm_host.h> +#include <linux/err.h> + +#include <asm/reg.h> +#include <asm/cputable.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/kvm_ppc.h> +#include <asm/kvm_book3s.h> +#include <asm/mmu_context.h> +#include <linux/sched.h> +#include <linux/vmalloc.h> + +#define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU + +/* #define EXIT_DEBUG */ +/* #define EXIT_DEBUG_SIMPLE */ + +/* Without AGGRESSIVE_DEC we only fire off a DEC interrupt when DEC turns 0. + * When set, we retrigger a DEC interrupt after that if DEC <= 0. + * PPC32 Linux runs faster without AGGRESSIVE_DEC, PPC64 Linux requires it. */ + +/* #define AGGRESSIVE_DEC */ + +struct kvm_stats_debugfs_item debugfs_entries[] = { + { "exits", VCPU_STAT(sum_exits) }, + { "mmio", VCPU_STAT(mmio_exits) }, + { "sig", VCPU_STAT(signal_exits) }, + { "sysc", VCPU_STAT(syscall_exits) }, + { "inst_emu", VCPU_STAT(emulated_inst_exits) }, + { "dec", VCPU_STAT(dec_exits) }, + { "ext_intr", VCPU_STAT(ext_intr_exits) }, + { "queue_intr", VCPU_STAT(queue_intr) }, + { "halt_wakeup", VCPU_STAT(halt_wakeup) }, + { "pf_storage", VCPU_STAT(pf_storage) }, + { "sp_storage", VCPU_STAT(sp_storage) }, + { "pf_instruc", VCPU_STAT(pf_instruc) }, + { "sp_instruc", VCPU_STAT(sp_instruc) }, + { "ld", VCPU_STAT(ld) }, + { "ld_slow", VCPU_STAT(ld_slow) }, + { "st", VCPU_STAT(st) }, + { "st_slow", VCPU_STAT(st_slow) }, + { NULL } +}; + +void kvmppc_core_load_host_debugstate(struct kvm_vcpu *vcpu) +{ +} + +void kvmppc_core_load_guest_debugstate(struct kvm_vcpu *vcpu) +{ +} + +void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu) +{ + memcpy(get_paca()->kvm_slb, to_book3s(vcpu)->slb_shadow, sizeof(get_paca()->kvm_slb)); + get_paca()->kvm_slb_max = to_book3s(vcpu)->slb_shadow_max; +} + +void kvmppc_core_vcpu_put(struct kvm_vcpu *vcpu) +{ + memcpy(to_book3s(vcpu)->slb_shadow, get_paca()->kvm_slb, sizeof(get_paca()->kvm_slb)); + to_book3s(vcpu)->slb_shadow_max = get_paca()->kvm_slb_max; +} + +#if defined(AGGRESSIVE_DEC) || defined(EXIT_DEBUG) +static u32 kvmppc_get_dec(struct kvm_vcpu *vcpu) +{ + u64 jd = mftb() - vcpu->arch.dec_jiffies; + return vcpu->arch.dec - jd; +} +#endif + +void kvmppc_set_msr(struct kvm_vcpu *vcpu, u64 msr) +{ + ulong old_msr = vcpu->arch.msr; + +#ifdef EXIT_DEBUG + printk(KERN_INFO "KVM: Set MSR to 0x%llx\n", msr); +#endif + msr &= to_book3s(vcpu)->msr_mask; + vcpu->arch.msr = msr; + vcpu->arch.shadow_msr = msr | MSR_USER32; + vcpu->arch.shadow_msr &= ( MSR_VEC | MSR_VSX | MSR_FP | MSR_FE0 | + MSR_USER64 | MSR_SE | MSR_BE | MSR_DE | + MSR_FE1); + + if (msr & (MSR_WE|MSR_POW)) { + if (!vcpu->arch.pending_exceptions) { + kvm_vcpu_block(vcpu); + vcpu->stat.halt_wakeup++; + } + } + + if (((vcpu->arch.msr & (MSR_IR|MSR_DR)) != (old_msr & (MSR_IR|MSR_DR))) || + (vcpu->arch.msr & MSR_PR) != (old_msr & MSR_PR)) { + kvmppc_mmu_flush_segments(vcpu); + kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc); + } +} + +void kvmppc_inject_interrupt(struct kvm_vcpu *vcpu, int vec, u64 flags) +{ + vcpu->arch.srr0 = vcpu->arch.pc; + vcpu->arch.srr1 = vcpu->arch.msr | flags; + vcpu->arch.pc = to_book3s(vcpu)->hior + vec; + vcpu->arch.mmu.reset_msr(vcpu); +} + +void kvmppc_book3s_queue_irqprio(struct kvm_vcpu *vcpu, unsigned int vec) +{ + unsigned int prio; + + vcpu->stat.queue_intr++; + switch (vec) { + case 0x100: prio = BOOK3S_IRQPRIO_SYSTEM_RESET; break; + case 0x200: prio = BOOK3S_IRQPRIO_MACHINE_CHECK; break; + case 0x300: prio = BOOK3S_IRQPRIO_DATA_STORAGE; break; + case 0x380: prio = BOOK3S_IRQPRIO_DATA_SEGMENT; break; + case 0x400: prio = BOOK3S_IRQPRIO_INST_STORAGE; break; + case 0x480: prio = BOOK3S_IRQPRIO_INST_SEGMENT; break; + case 0x500: prio = BOOK3S_IRQPRIO_EXTERNAL; break; + case 0x600: prio = BOOK3S_IRQPRIO_ALIGNMENT; break; + case 0x700: prio = BOOK3S_IRQPRIO_PROGRAM; break; + case 0x800: prio = BOOK3S_IRQPRIO_FP_UNAVAIL; break; + case 0x900: prio = BOOK3S_IRQPRIO_DECREMENTER; break; + case 0xc00: prio = BOOK3S_IRQPRIO_SYSCALL; break; + case 0xd00: prio = BOOK3S_IRQPRIO_DEBUG; break; + case 0xf20: prio = BOOK3S_IRQPRIO_ALTIVEC; break; + case 0xf40: prio = BOOK3S_IRQPRIO_VSX; break; + default: prio = BOOK3S_IRQPRIO_MAX; break; + } + + set_bit(prio, &vcpu->arch.pending_exceptions); +#ifdef EXIT_DEBUG + printk(KERN_INFO "Queueing interrupt %x\n", vec); +#endif +} + + +void kvmppc_core_queue_program(struct kvm_vcpu *vcpu) +{ + kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_PROGRAM); +} + +void kvmppc_core_queue_dec(struct kvm_vcpu *vcpu) +{ + kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_DECREMENTER); +} + +int kvmppc_core_pending_dec(struct kvm_vcpu *vcpu) +{ + return test_bit(BOOK3S_INTERRUPT_DECREMENTER >> 7, &vcpu->arch.pending_exceptions); +} + +void kvmppc_core_queue_external(struct kvm_vcpu *vcpu, + struct kvm_interrupt *irq) +{ + kvmppc_book3s_queue_irqprio(vcpu, BOOK3S_INTERRUPT_EXTERNAL); +} + +int kvmppc_book3s_irqprio_deliver(struct kvm_vcpu *vcpu, unsigned int priority) +{ + int deliver = 1; + int vec = 0; + + switch (priority) { + case BOOK3S_IRQPRIO_DECREMENTER: + deliver = vcpu->arch.msr & MSR_EE; + vec = BOOK3S_INTERRUPT_DECREMENTER; + break; + case BOOK3S_IRQPRIO_EXTERNAL: + deliver = vcpu->arch.msr & MSR_EE; + vec = BOOK3S_INTERRUPT_EXTERNAL; + break; + case BOOK3S_IRQPRIO_SYSTEM_RESET: + vec = BOOK3S_INTERRUPT_SYSTEM_RESET; + break; + case BOOK3S_IRQPRIO_MACHINE_CHECK: + vec = BOOK3S_INTERRUPT_MACHINE_CHECK; + break; + case BOOK3S_IRQPRIO_DATA_STORAGE: + vec = BOOK3S_INTERRUPT_DATA_STORAGE; + break; + case BOOK3S_IRQPRIO_INST_STORAGE: + vec = BOOK3S_INTERRUPT_INST_STORAGE; + break; + case BOOK3S_IRQPRIO_DATA_SEGMENT: + vec = BOOK3S_INTERRUPT_DATA_SEGMENT; + break; + case BOOK3S_IRQPRIO_INST_SEGMENT: + vec = BOOK3S_INTERRUPT_INST_SEGMENT; + break; + case BOOK3S_IRQPRIO_ALIGNMENT: + vec = BOOK3S_INTERRUPT_ALIGNMENT; + break; + case BOOK3S_IRQPRIO_PROGRAM: + vec = BOOK3S_INTERRUPT_PROGRAM; + break; + case BOOK3S_IRQPRIO_VSX: + vec = BOOK3S_INTERRUPT_VSX; + break; + case BOOK3S_IRQPRIO_ALTIVEC: + vec = BOOK3S_INTERRUPT_ALTIVEC; + break; + case BOOK3S_IRQPRIO_FP_UNAVAIL: + vec = BOOK3S_INTERRUPT_FP_UNAVAIL; + break; + case BOOK3S_IRQPRIO_SYSCALL: + vec = BOOK3S_INTERRUPT_SYSCALL; + break; + case BOOK3S_IRQPRIO_DEBUG: + vec = BOOK3S_INTERRUPT_TRACE; + break; + case BOOK3S_IRQPRIO_PERFORMANCE_MONITOR: + vec = BOOK3S_INTERRUPT_PERFMON; + break; + default: + deliver = 0; + printk(KERN_ERR "KVM: Unknown interrupt: 0x%x\n", priority); + break; + } + +#if 0 + printk(KERN_INFO "Deliver interrupt 0x%x? %x\n", vec, deliver); +#endif + + if (deliver) + kvmppc_inject_interrupt(vcpu, vec, 0ULL); + + return deliver; +} + +void kvmppc_core_deliver_interrupts(struct kvm_vcpu *vcpu) +{ + unsigned long *pending = &vcpu->arch.pending_exceptions; + unsigned int priority; + + /* XXX be more clever here - no need to mftb() on every entry */ + /* Issue DEC again if it's still active */ +#ifdef AGGRESSIVE_DEC + if (vcpu->arch.msr & MSR_EE) + if (kvmppc_get_dec(vcpu) & 0x80000000) + kvmppc_core_queue_dec(vcpu); +#endif + +#ifdef EXIT_DEBUG + if (vcpu->arch.pending_exceptions) + printk(KERN_EMERG "KVM: Check pending: %lx\n", vcpu->arch.pending_exceptions); +#endif + priority = __ffs(*pending); + while (priority <= (sizeof(unsigned int) * 8)) { + if (kvmppc_book3s_irqprio_deliver(vcpu, priority)) { + clear_bit(priority, &vcpu->arch.pending_exceptions); + break; + } + + priority = find_next_bit(pending, + BITS_PER_BYTE * sizeof(*pending), + priority + 1); + } +} + +void kvmppc_set_pvr(struct kvm_vcpu *vcpu, u32 pvr) +{ + vcpu->arch.hflags &= ~BOOK3S_HFLAG_SLB; + vcpu->arch.pvr = pvr; + if ((pvr >= 0x330000) && (pvr < 0x70330000)) { + kvmppc_mmu_book3s_64_init(vcpu); + to_book3s(vcpu)->hior = 0xfff00000; + to_book3s(vcpu)->msr_mask = 0xffffffffffffffffULL; + } else { + kvmppc_mmu_book3s_32_init(vcpu); + to_book3s(vcpu)->hior = 0; + to_book3s(vcpu)->msr_mask = 0xffffffffULL; + } + + /* If we are in hypervisor level on 970, we can tell the CPU to + * treat DCBZ as 32 bytes store */ + vcpu->arch.hflags &= ~BOOK3S_HFLAG_DCBZ32; + if (vcpu->arch.mmu.is_dcbz32(vcpu) && (mfmsr() & MSR_HV) && + !strcmp(cur_cpu_spec->platform, "ppc970")) + vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32; + +} + +/* Book3s_32 CPUs always have 32 bytes cache line size, which Linux assumes. To + * make Book3s_32 Linux work on Book3s_64, we have to make sure we trap dcbz to + * emulate 32 bytes dcbz length. + * + * The Book3s_64 inventors also realized this case and implemented a special bit + * in the HID5 register, which is a hypervisor ressource. Thus we can't use it. + * + * My approach here is to patch the dcbz instruction on executing pages. + */ +static void kvmppc_patch_dcbz(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte) +{ + bool touched = false; + hva_t hpage; + u32 *page; + int i; + + hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT); + if (kvm_is_error_hva(hpage)) + return; + + hpage |= pte->raddr & ~PAGE_MASK; + hpage &= ~0xFFFULL; + + page = vmalloc(HW_PAGE_SIZE); + + if (copy_from_user(page, (void __user *)hpage, HW_PAGE_SIZE)) + goto out; + + for (i=0; i < HW_PAGE_SIZE / 4; i++) + if ((page[i] & 0xff0007ff) == INS_DCBZ) { + page[i] &= 0xfffffff7; // reserved instruction, so we trap + touched = true; + } + + if (touched) + copy_to_user((void __user *)hpage, page, HW_PAGE_SIZE); + +out: + vfree(page); +} + +static int kvmppc_xlate(struct kvm_vcpu *vcpu, ulong eaddr, bool data, + struct kvmppc_pte *pte) +{ + int relocated = (vcpu->arch.msr & (data ? MSR_DR : MSR_IR)); + int r; + + if (relocated) { + r = vcpu->arch.mmu.xlate(vcpu, eaddr, pte, data); + } else { + pte->eaddr = eaddr; + pte->raddr = eaddr & 0xffffffff; + pte->vpage = eaddr >> 12; + switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) { + case 0: + pte->vpage |= VSID_REAL; + case MSR_DR: + pte->vpage |= VSID_REAL_DR; + case MSR_IR: + pte->vpage |= VSID_REAL_IR; + } + pte->may_read = true; + pte->may_write = true; + pte->may_execute = true; + r = 0; + } + + return r; +} + +static hva_t kvmppc_bad_hva(void) +{ + return PAGE_OFFSET; +} + +static hva_t kvmppc_pte_to_hva(struct kvm_vcpu *vcpu, struct kvmppc_pte *pte, + bool read) +{ + hva_t hpage; + + if (read && !pte->may_read) + goto err; + + if (!read && !pte->may_write) + goto err; + + hpage = gfn_to_hva(vcpu->kvm, pte->raddr >> PAGE_SHIFT); + if (kvm_is_error_hva(hpage)) + goto err; + + return hpage | (pte->raddr & ~PAGE_MASK); +err: + return kvmppc_bad_hva(); +} + +int kvmppc_st(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr) +{ + struct kvmppc_pte pte; + hva_t hva = eaddr; + + vcpu->stat.st++; + + if (kvmppc_xlate(vcpu, eaddr, false, &pte)) + goto err; + + hva = kvmppc_pte_to_hva(vcpu, &pte, false); + if (kvm_is_error_hva(hva)) + goto err; + + if (copy_to_user((void __user *)hva, ptr, size)) { + printk(KERN_INFO "kvmppc_st at 0x%lx failed\n", hva); + goto err; + } + + return 0; + +err: + return -ENOENT; +} + +int kvmppc_ld(struct kvm_vcpu *vcpu, ulong eaddr, int size, void *ptr, + bool data) +{ + struct kvmppc_pte pte; + hva_t hva = eaddr; + + vcpu->stat.ld++; + + if (kvmppc_xlate(vcpu, eaddr, data, &pte)) + goto err; + + hva = kvmppc_pte_to_hva(vcpu, &pte, true); + if (kvm_is_error_hva(hva)) + goto err; + + if (copy_from_user(ptr, (void __user *)hva, size)) { + printk(KERN_INFO "kvmppc_ld at 0x%lx failed\n", hva); + goto err; + } + + return 0; + +err: + return -ENOENT; +} + +static int kvmppc_visible_gfn(struct kvm_vcpu *vcpu, gfn_t gfn) +{ + return kvm_is_visible_gfn(vcpu->kvm, gfn); +} + +int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu, + ulong eaddr, int vec) +{ + bool data = (vec == BOOK3S_INTERRUPT_DATA_STORAGE); + int r = RESUME_GUEST; + int relocated; + int page_found = 0; + struct kvmppc_pte pte; + bool is_mmio = false; + + if ( vec == BOOK3S_INTERRUPT_DATA_STORAGE ) { + relocated = (vcpu->arch.msr & MSR_DR); + } else { + relocated = (vcpu->arch.msr & MSR_IR); + } + + /* Resolve real address if translation turned on */ + if (relocated) { + page_found = vcpu->arch.mmu.xlate(vcpu, eaddr, &pte, data); + } else { + pte.may_execute = true; + pte.may_read = true; + pte.may_write = true; + pte.raddr = eaddr & 0xffffffff; + pte.eaddr = eaddr; + pte.vpage = eaddr >> 12; + switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) { + case 0: + pte.vpage |= VSID_REAL; + case MSR_DR: + pte.vpage |= VSID_REAL_DR; + case MSR_IR: + pte.vpage |= VSID_REAL_IR; + } + } + + if (vcpu->arch.mmu.is_dcbz32(vcpu) && + (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) { + /* + * If we do the dcbz hack, we have to NX on every execution, + * so we can patch the executing code. This renders our guest + * NX-less. + */ + pte.may_execute = !data; + } + + if (page_found == -ENOENT) { + /* Page not found in guest PTE entries */ + vcpu->arch.dear = vcpu->arch.fault_dear; + to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr; + vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL); + kvmppc_book3s_queue_irqprio(vcpu, vec); + } else if (page_found == -EPERM) { + /* Storage protection */ + vcpu->arch.dear = vcpu->arch.fault_dear; + to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr & ~DSISR_NOHPTE; + to_book3s(vcpu)->dsisr |= DSISR_PROTFAULT; + vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x00000000f8000000ULL); + kvmppc_book3s_queue_irqprio(vcpu, vec); + } else if (page_found == -EINVAL) { + /* Page not found in guest SLB */ + vcpu->arch.dear = vcpu->arch.fault_dear; + kvmppc_book3s_queue_irqprio(vcpu, vec + 0x80); + } else if (!is_mmio && + kvmppc_visible_gfn(vcpu, pte.raddr >> PAGE_SHIFT)) { + /* The guest's PTE is not mapped yet. Map on the host */ + kvmppc_mmu_map_page(vcpu, &pte); + if (data) + vcpu->stat.sp_storage++; + else if (vcpu->arch.mmu.is_dcbz32(vcpu) && + (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) + kvmppc_patch_dcbz(vcpu, &pte); + } else { + /* MMIO */ + vcpu->stat.mmio_exits++; + vcpu->arch.paddr_accessed = pte.raddr; + r = kvmppc_emulate_mmio(run, vcpu); + if ( r == RESUME_HOST_NV ) + r = RESUME_HOST; + if ( r == RESUME_GUEST_NV ) + r = RESUME_GUEST; + } + + return r; +} + +int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu, + unsigned int exit_nr) +{ + int r = RESUME_HOST; + + vcpu->stat.sum_exits++; + + run->exit_reason = KVM_EXIT_UNKNOWN; + run->ready_for_interrupt_injection = 1; +#ifdef EXIT_DEBUG + printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | dec=0x%x | msr=0x%lx\n", + exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear, + kvmppc_get_dec(vcpu), vcpu->arch.msr); +#elif defined (EXIT_DEBUG_SIMPLE) + if ((exit_nr != 0x900) && (exit_nr != 0x500)) + printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | dar=0x%lx | msr=0x%lx\n", + exit_nr, vcpu->arch.pc, vcpu->arch.fault_dear, + vcpu->arch.msr); +#endif + kvm_resched(vcpu); + switch (exit_nr) { + case BOOK3S_INTERRUPT_INST_STORAGE: + vcpu->stat.pf_instruc++; + /* only care about PTEG not found errors, but leave NX alone */ + if (vcpu->arch.shadow_msr & 0x40000000) { + r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.pc, exit_nr); + vcpu->stat.sp_instruc++; + } else if (vcpu->arch.mmu.is_dcbz32(vcpu) && + (!(vcpu->arch.hflags & BOOK3S_HFLAG_DCBZ32))) { + /* + * XXX If we do the dcbz hack we use the NX bit to flush&patch the page, + * so we can't use the NX bit inside the guest. Let's cross our fingers, + * that no guest that needs the dcbz hack does NX. + */ + kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL); + } else { + vcpu->arch.msr |= (vcpu->arch.shadow_msr & 0x58000000); + kvmppc_book3s_queue_irqprio(vcpu, exit_nr); + kvmppc_mmu_pte_flush(vcpu, vcpu->arch.pc, ~0xFFFULL); + r = RESUME_GUEST; + } + break; + case BOOK3S_INTERRUPT_DATA_STORAGE: + vcpu->stat.pf_storage++; + /* The only case we need to handle is missing shadow PTEs */ + if (vcpu->arch.fault_dsisr & DSISR_NOHPTE) { + r = kvmppc_handle_pagefault(run, vcpu, vcpu->arch.fault_dear, exit_nr); + } else { + vcpu->arch.dear = vcpu->arch.fault_dear; + to_book3s(vcpu)->dsisr = vcpu->arch.fault_dsisr; + kvmppc_book3s_queue_irqprio(vcpu, exit_nr); + kvmppc_mmu_pte_flush(vcpu, vcpu->arch.dear, ~0xFFFULL); + r = RESUME_GUEST; + } + break; + case BOOK3S_INTERRUPT_DATA_SEGMENT: + if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.fault_dear) < 0) { + vcpu->arch.dear = vcpu->arch.fault_dear; + kvmppc_book3s_queue_irqprio(vcpu, + BOOK3S_INTERRUPT_DATA_SEGMENT); + } + r = RESUME_GUEST; + break; + case BOOK3S_INTERRUPT_INST_SEGMENT: + if (kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc) < 0) { + kvmppc_book3s_queue_irqprio(vcpu, + BOOK3S_INTERRUPT_INST_SEGMENT); + } + r = RESUME_GUEST; + break; + /* We're good on these - the host merely wanted to get our attention */ + case BOOK3S_INTERRUPT_DECREMENTER: + vcpu->stat.dec_exits++; + r = RESUME_GUEST; + break; + case BOOK3S_INTERRUPT_EXTERNAL: + vcpu->stat.ext_intr_exits++; + r = RESUME_GUEST; + break; + case BOOK3S_INTERRUPT_PROGRAM: + { + enum emulation_result er; + + if (vcpu->arch.msr & MSR_PR) { +#ifdef EXIT_DEBUG + printk(KERN_INFO "Userspace triggered 0x700 exception at 0x%lx (0x%x)\n", vcpu->arch.pc, vcpu->arch.last_inst); +#endif + if ((vcpu->arch.last_inst & 0xff0007ff) != + (INS_DCBZ & 0xfffffff7)) { + kvmppc_book3s_queue_irqprio(vcpu, exit_nr); + r = RESUME_GUEST; + break; + } + } + + vcpu->stat.emulated_inst_exits++; + er = kvmppc_emulate_instruction(run, vcpu); + switch (er) { + case EMULATE_DONE: + r = RESUME_GUEST; + break; + case EMULATE_FAIL: + printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n", + __func__, vcpu->arch.pc, vcpu->arch.last_inst); + kvmppc_book3s_queue_irqprio(vcpu, exit_nr); + r = RESUME_GUEST; + break; + default: + BUG(); + } + break; + } + case BOOK3S_INTERRUPT_SYSCALL: +#ifdef EXIT_DEBUG + printk(KERN_INFO "Syscall Nr %d\n", (int)vcpu->arch.gpr[0]); +#endif + vcpu->stat.syscall_exits++; + kvmppc_book3s_queue_irqprio(vcpu, exit_nr); + r = RESUME_GUEST; + break; + case BOOK3S_INTERRUPT_MACHINE_CHECK: + case BOOK3S_INTERRUPT_FP_UNAVAIL: + case BOOK3S_INTERRUPT_TRACE: + case BOOK3S_INTERRUPT_ALTIVEC: + case BOOK3S_INTERRUPT_VSX: + kvmppc_book3s_queue_irqprio(vcpu, exit_nr); + r = RESUME_GUEST; + break; + default: + /* Ugh - bork here! What did we get? */ + printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n", exit_nr, vcpu->arch.pc, vcpu->arch.shadow_msr); + r = RESUME_HOST; + BUG(); + break; + } + + + if (!(r & RESUME_HOST)) { + /* To avoid clobbering exit_reason, only check for signals if + * we aren't already exiting to userspace for some other + * reason. */ + if (signal_pending(current)) { +#ifdef EXIT_DEBUG + printk(KERN_EMERG "KVM: Going back to host\n"); +#endif + vcpu->stat.signal_exits++; + run->exit_reason = KVM_EXIT_INTR; + r = -EINTR; + } else { + /* In case an interrupt came in that was triggered + * from userspace (like DEC), we need to check what + * to inject now! */ + kvmppc_core_deliver_interrupts(vcpu); + } + } + +#ifdef EXIT_DEBUG + printk(KERN_EMERG "KVM exit: vcpu=0x%p pc=0x%lx r=0x%x\n", vcpu, vcpu->arch.pc, r); +#endif + + return r; +} + +int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) +{ + return 0; +} + +int kvm_arch_vcpu_ioctl_get_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) +{ + int i; + + regs->pc = vcpu->arch.pc; + regs->cr = vcpu->arch.cr; + regs->ctr = vcpu->arch.ctr; + regs->lr = vcpu->arch.lr; + regs->xer = vcpu->arch.xer; + regs->msr = vcpu->arch.msr; + regs->srr0 = vcpu->arch.srr0; + regs->srr1 = vcpu->arch.srr1; + regs->pid = vcpu->arch.pid; + regs->sprg0 = vcpu->arch.sprg0; + regs->sprg1 = vcpu->arch.sprg1; + regs->sprg2 = vcpu->arch.sprg2; + regs->sprg3 = vcpu->arch.sprg3; + regs->sprg5 = vcpu->arch.sprg4; + regs->sprg6 = vcpu->arch.sprg5; + regs->sprg7 = vcpu->arch.sprg6; + + for (i = 0; i < ARRAY_SIZE(regs->gpr); i++) + regs->gpr[i] = vcpu->arch.gpr[i]; + + return 0; +} + +int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs) +{ + int i; + + vcpu->arch.pc = regs->pc; + vcpu->arch.cr = regs->cr; + vcpu->arch.ctr = regs->ctr; + vcpu->arch.lr = regs->lr; + vcpu->arch.xer = regs->xer; + kvmppc_set_msr(vcpu, regs->msr); + vcpu->arch.srr0 = regs->srr0; + vcpu->arch.srr1 = regs->srr1; + vcpu->arch.sprg0 = regs->sprg0; + vcpu->arch.sprg1 = regs->sprg1; + vcpu->arch.sprg2 = regs->sprg2; + vcpu->arch.sprg3 = regs->sprg3; + vcpu->arch.sprg5 = regs->sprg4; + vcpu->arch.sprg6 = regs->sprg5; + vcpu->arch.sprg7 = regs->sprg6; + + for (i = 0; i < ARRAY_SIZE(vcpu->arch.gpr); i++) + vcpu->arch.gpr[i] = regs->gpr[i]; + + return 0; +} + +int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu, + struct kvm_sregs *sregs) +{ + struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu); + int i; + + sregs->pvr = vcpu->arch.pvr; + + sregs->u.s.sdr1 = to_book3s(vcpu)->sdr1; + if (vcpu->arch.hflags & BOOK3S_HFLAG_SLB) { + for (i = 0; i < 64; i++) { + sregs->u.s.ppc64.slb[i].slbe = vcpu3s->slb[i].orige | i; + sregs->u.s.ppc64.slb[i].slbv = vcpu3s->slb[i].origv; + } + } else { + for (i = 0; i < 16; i++) { + sregs->u.s.ppc32.sr[i] = vcpu3s->sr[i].raw; + sregs->u.s.ppc32.sr[i] = vcpu3s->sr[i].raw; + } + for (i = 0; i < 8; i++) { + sregs->u.s.ppc32.ibat[i] = vcpu3s->ibat[i].raw; + sregs->u.s.ppc32.dbat[i] = vcpu3s->dbat[i].raw; + } + } + return 0; +} + +int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, + struct kvm_sregs *sregs) +{ + struct kvmppc_vcpu_book3s *vcpu3s = to_book3s(vcpu); + int i; + + kvmppc_set_pvr(vcpu, sregs->pvr); + + vcpu3s->sdr1 = sregs->u.s.sdr1; + if (vcpu->arch.hflags & BOOK3S_HFLAG_SLB) { + for (i = 0; i < 64; i++) { + vcpu->arch.mmu.slbmte(vcpu, sregs->u.s.ppc64.slb[i].slbv, + sregs->u.s.ppc64.slb[i].slbe); + } + } else { + for (i = 0; i < 16; i++) { + vcpu->arch.mmu.mtsrin(vcpu, i, sregs->u.s.ppc32.sr[i]); + } + for (i = 0; i < 8; i++) { + kvmppc_set_bat(vcpu, &(vcpu3s->ibat[i]), false, + (u32)sregs->u.s.ppc32.ibat[i]); + kvmppc_set_bat(vcpu, &(vcpu3s->ibat[i]), true, + (u32)(sregs->u.s.ppc32.ibat[i] >> 32)); + kvmppc_set_bat(vcpu, &(vcpu3s->dbat[i]), false, + (u32)sregs->u.s.ppc32.dbat[i]); + kvmppc_set_bat(vcpu, &(vcpu3s->dbat[i]), true, + (u32)(sregs->u.s.ppc32.dbat[i] >> 32)); + } + } + + /* Flush the MMU after messing with the segments */ + kvmppc_mmu_pte_flush(vcpu, 0, 0); + return 0; +} + +int kvm_arch_vcpu_ioctl_get_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) +{ + return -ENOTSUPP; +} + +int kvm_arch_vcpu_ioctl_set_fpu(struct kvm_vcpu *vcpu, struct kvm_fpu *fpu) +{ + return -ENOTSUPP; +} + +int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu, + struct kvm_translation *tr) +{ + return 0; +} + +/* + * Get (and clear) the dirty memory log for a memory slot. + */ +int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, + struct kvm_dirty_log *log) +{ + struct kvm_memory_slot *memslot; + struct kvm_vcpu *vcpu; + ulong ga, ga_end; + int is_dirty = 0; + int r, n; + + down_write(&kvm->slots_lock); + + r = kvm_get_dirty_log(kvm, log, &is_dirty); + if (r) + goto out; + + /* If nothing is dirty, don't bother messing with page tables. */ + if (is_dirty) { + memslot = &kvm->memslots[log->slot]; + + ga = memslot->base_gfn << PAGE_SHIFT; + ga_end = ga + (memslot->npages << PAGE_SHIFT); + + kvm_for_each_vcpu(n, vcpu, kvm) + kvmppc_mmu_pte_pflush(vcpu, ga, ga_end); + + n = ALIGN(memslot->npages, BITS_PER_LONG) / 8; + memset(memslot->dirty_bitmap, 0, n); + } + + r = 0; +out: + up_write(&kvm->slots_lock); + return r; +} + +int kvmppc_core_check_processor_compat(void) +{ + return 0; +} + +struct kvm_vcpu *kvmppc_core_vcpu_create(struct kvm *kvm, unsigned int id) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s; + struct kvm_vcpu *vcpu; + int err; + + vcpu_book3s = (struct kvmppc_vcpu_book3s *)__get_free_pages( GFP_KERNEL | __GFP_ZERO, + get_order(sizeof(struct kvmppc_vcpu_book3s))); + if (!vcpu_book3s) { + err = -ENOMEM; + goto out; + } + + vcpu = &vcpu_book3s->vcpu; + err = kvm_vcpu_init(vcpu, kvm, id); + if (err) + goto free_vcpu; + + vcpu->arch.host_retip = kvm_return_point; + vcpu->arch.host_msr = mfmsr(); + /* default to book3s_64 (970fx) */ + vcpu->arch.pvr = 0x3C0301; + kvmppc_set_pvr(vcpu, vcpu->arch.pvr); + vcpu_book3s->slb_nr = 64; + + /* remember where some real-mode handlers are */ + vcpu->arch.trampoline_lowmem = kvmppc_trampoline_lowmem; + vcpu->arch.trampoline_enter = kvmppc_trampoline_enter; + vcpu->arch.highmem_handler = (ulong)kvmppc_handler_highmem; + + vcpu->arch.shadow_msr = MSR_USER64; + + err = __init_new_context(); + if (err < 0) + goto free_vcpu; + vcpu_book3s->context_id = err; + + vcpu_book3s->vsid_max = ((vcpu_book3s->context_id + 1) << USER_ESID_BITS) - 1; + vcpu_book3s->vsid_first = vcpu_book3s->context_id << USER_ESID_BITS; + vcpu_book3s->vsid_next = vcpu_book3s->vsid_first; + + return vcpu; + +free_vcpu: + free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s))); +out: + return ERR_PTR(err); +} + +void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + + __destroy_context(vcpu_book3s->context_id); + kvm_vcpu_uninit(vcpu); + free_pages((long)vcpu_book3s, get_order(sizeof(struct kvmppc_vcpu_book3s))); +} + +extern int __kvmppc_vcpu_entry(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu); +int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu) +{ + int ret; + + /* No need to go into the guest when all we do is going out */ + if (signal_pending(current)) { + kvm_run->exit_reason = KVM_EXIT_INTR; + return -EINTR; + } + + /* XXX we get called with irq disabled - change that! */ + local_irq_enable(); + + ret = __kvmppc_vcpu_entry(kvm_run, vcpu); + + local_irq_disable(); + + return ret; +} + +static int kvmppc_book3s_init(void) +{ + return kvm_init(NULL, sizeof(struct kvmppc_vcpu_book3s), THIS_MODULE); +} + +static void kvmppc_book3s_exit(void) +{ + kvm_exit(); +} + +module_init(kvmppc_book3s_init); +module_exit(kvmppc_book3s_exit); diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c new file mode 100644 index 000000000000..faf99f20d993 --- /dev/null +++ b/arch/powerpc/kvm/book3s_32_mmu.c @@ -0,0 +1,372 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <linux/highmem.h> + +#include <asm/tlbflush.h> +#include <asm/kvm_ppc.h> +#include <asm/kvm_book3s.h> + +/* #define DEBUG_MMU */ +/* #define DEBUG_MMU_PTE */ +/* #define DEBUG_MMU_PTE_IP 0xfff14c40 */ + +#ifdef DEBUG_MMU +#define dprintk(X...) printk(KERN_INFO X) +#else +#define dprintk(X...) do { } while(0) +#endif + +#ifdef DEBUG_PTE +#define dprintk_pte(X...) printk(KERN_INFO X) +#else +#define dprintk_pte(X...) do { } while(0) +#endif + +#define PTEG_FLAG_ACCESSED 0x00000100 +#define PTEG_FLAG_DIRTY 0x00000080 + +static inline bool check_debug_ip(struct kvm_vcpu *vcpu) +{ +#ifdef DEBUG_MMU_PTE_IP + return vcpu->arch.pc == DEBUG_MMU_PTE_IP; +#else + return true; +#endif +} + +static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *pte, bool data); + +static struct kvmppc_sr *find_sr(struct kvmppc_vcpu_book3s *vcpu_book3s, gva_t eaddr) +{ + return &vcpu_book3s->sr[(eaddr >> 28) & 0xf]; +} + +static u64 kvmppc_mmu_book3s_32_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr, + bool data) +{ + struct kvmppc_sr *sre = find_sr(to_book3s(vcpu), eaddr); + struct kvmppc_pte pte; + + if (!kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, &pte, data)) + return pte.vpage; + + return (((u64)eaddr >> 12) & 0xffff) | (((u64)sre->vsid) << 16); +} + +static void kvmppc_mmu_book3s_32_reset_msr(struct kvm_vcpu *vcpu) +{ + kvmppc_set_msr(vcpu, 0); +} + +static hva_t kvmppc_mmu_book3s_32_get_pteg(struct kvmppc_vcpu_book3s *vcpu_book3s, + struct kvmppc_sr *sre, gva_t eaddr, + bool primary) +{ + u32 page, hash, pteg, htabmask; + hva_t r; + + page = (eaddr & 0x0FFFFFFF) >> 12; + htabmask = ((vcpu_book3s->sdr1 & 0x1FF) << 16) | 0xFFC0; + + hash = ((sre->vsid ^ page) << 6); + if (!primary) + hash = ~hash; + hash &= htabmask; + + pteg = (vcpu_book3s->sdr1 & 0xffff0000) | hash; + + dprintk("MMU: pc=0x%lx eaddr=0x%lx sdr1=0x%llx pteg=0x%x vsid=0x%x\n", + vcpu_book3s->vcpu.arch.pc, eaddr, vcpu_book3s->sdr1, pteg, + sre->vsid); + + r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT); + if (kvm_is_error_hva(r)) + return r; + return r | (pteg & ~PAGE_MASK); +} + +static u32 kvmppc_mmu_book3s_32_get_ptem(struct kvmppc_sr *sre, gva_t eaddr, + bool primary) +{ + return ((eaddr & 0x0fffffff) >> 22) | (sre->vsid << 7) | + (primary ? 0 : 0x40) | 0x80000000; +} + +static int kvmppc_mmu_book3s_32_xlate_bat(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *pte, bool data) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + struct kvmppc_bat *bat; + int i; + + for (i = 0; i < 8; i++) { + if (data) + bat = &vcpu_book3s->dbat[i]; + else + bat = &vcpu_book3s->ibat[i]; + + if (vcpu->arch.msr & MSR_PR) { + if (!bat->vp) + continue; + } else { + if (!bat->vs) + continue; + } + + if (check_debug_ip(vcpu)) + { + dprintk_pte("%cBAT %02d: 0x%lx - 0x%x (0x%x)\n", + data ? 'd' : 'i', i, eaddr, bat->bepi, + bat->bepi_mask); + } + if ((eaddr & bat->bepi_mask) == bat->bepi) { + pte->raddr = bat->brpn | (eaddr & ~bat->bepi_mask); + pte->vpage = (eaddr >> 12) | VSID_BAT; + pte->may_read = bat->pp; + pte->may_write = bat->pp > 1; + pte->may_execute = true; + if (!pte->may_read) { + printk(KERN_INFO "BAT is not readable!\n"); + continue; + } + if (!pte->may_write) { + /* let's treat r/o BATs as not-readable for now */ + dprintk_pte("BAT is read-only!\n"); + continue; + } + + return 0; + } + } + + return -ENOENT; +} + +static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *pte, bool data, + bool primary) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + struct kvmppc_sr *sre; + hva_t ptegp; + u32 pteg[16]; + u64 ptem = 0; + int i; + int found = 0; + + sre = find_sr(vcpu_book3s, eaddr); + + dprintk_pte("SR 0x%lx: vsid=0x%x, raw=0x%x\n", eaddr >> 28, + sre->vsid, sre->raw); + + pte->vpage = kvmppc_mmu_book3s_32_ea_to_vp(vcpu, eaddr, data); + + ptegp = kvmppc_mmu_book3s_32_get_pteg(vcpu_book3s, sre, eaddr, primary); + if (kvm_is_error_hva(ptegp)) { + printk(KERN_INFO "KVM: Invalid PTEG!\n"); + goto no_page_found; + } + + ptem = kvmppc_mmu_book3s_32_get_ptem(sre, eaddr, primary); + + if(copy_from_user(pteg, (void __user *)ptegp, sizeof(pteg))) { + printk(KERN_ERR "KVM: Can't copy data from 0x%lx!\n", ptegp); + goto no_page_found; + } + + for (i=0; i<16; i+=2) { + if (ptem == pteg[i]) { + u8 pp; + + pte->raddr = (pteg[i+1] & ~(0xFFFULL)) | (eaddr & 0xFFF); + pp = pteg[i+1] & 3; + + if ((sre->Kp && (vcpu->arch.msr & MSR_PR)) || + (sre->Ks && !(vcpu->arch.msr & MSR_PR))) + pp |= 4; + + pte->may_write = false; + pte->may_read = false; + pte->may_execute = true; + switch (pp) { + case 0: + case 1: + case 2: + case 6: + pte->may_write = true; + case 3: + case 5: + case 7: + pte->may_read = true; + break; + } + + if ( !pte->may_read ) + continue; + + dprintk_pte("MMU: Found PTE -> %x %x - %x\n", + pteg[i], pteg[i+1], pp); + found = 1; + break; + } + } + + /* Update PTE C and A bits, so the guest's swapper knows we used the + page */ + if (found) { + u32 oldpte = pteg[i+1]; + + if (pte->may_read) + pteg[i+1] |= PTEG_FLAG_ACCESSED; + if (pte->may_write) + pteg[i+1] |= PTEG_FLAG_DIRTY; + else + dprintk_pte("KVM: Mapping read-only page!\n"); + + /* Write back into the PTEG */ + if (pteg[i+1] != oldpte) + copy_to_user((void __user *)ptegp, pteg, sizeof(pteg)); + + return 0; + } + +no_page_found: + + if (check_debug_ip(vcpu)) { + dprintk_pte("KVM MMU: No PTE found (sdr1=0x%llx ptegp=0x%lx)\n", + to_book3s(vcpu)->sdr1, ptegp); + for (i=0; i<16; i+=2) { + dprintk_pte(" %02d: 0x%x - 0x%x (0x%llx)\n", + i, pteg[i], pteg[i+1], ptem); + } + } + + return -ENOENT; +} + +static int kvmppc_mmu_book3s_32_xlate(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *pte, bool data) +{ + int r; + + pte->eaddr = eaddr; + r = kvmppc_mmu_book3s_32_xlate_bat(vcpu, eaddr, pte, data); + if (r < 0) + r = kvmppc_mmu_book3s_32_xlate_pte(vcpu, eaddr, pte, data, true); + if (r < 0) + r = kvmppc_mmu_book3s_32_xlate_pte(vcpu, eaddr, pte, data, false); + + return r; +} + + +static u32 kvmppc_mmu_book3s_32_mfsrin(struct kvm_vcpu *vcpu, u32 srnum) +{ + return to_book3s(vcpu)->sr[srnum].raw; +} + +static void kvmppc_mmu_book3s_32_mtsrin(struct kvm_vcpu *vcpu, u32 srnum, + ulong value) +{ + struct kvmppc_sr *sre; + + sre = &to_book3s(vcpu)->sr[srnum]; + + /* Flush any left-over shadows from the previous SR */ + + /* XXX Not necessary? */ + /* kvmppc_mmu_pte_flush(vcpu, ((u64)sre->vsid) << 28, 0xf0000000ULL); */ + + /* And then put in the new SR */ + sre->raw = value; + sre->vsid = (value & 0x0fffffff); + sre->Ks = (value & 0x40000000) ? true : false; + sre->Kp = (value & 0x20000000) ? true : false; + sre->nx = (value & 0x10000000) ? true : false; + + /* Map the new segment */ + kvmppc_mmu_map_segment(vcpu, srnum << SID_SHIFT); +} + +static void kvmppc_mmu_book3s_32_tlbie(struct kvm_vcpu *vcpu, ulong ea, bool large) +{ + kvmppc_mmu_pte_flush(vcpu, ea, ~0xFFFULL); +} + +static int kvmppc_mmu_book3s_32_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid, + u64 *vsid) +{ + /* In case we only have one of MSR_IR or MSR_DR set, let's put + that in the real-mode context (and hope RM doesn't access + high memory) */ + switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) { + case 0: + *vsid = (VSID_REAL >> 16) | esid; + break; + case MSR_IR: + *vsid = (VSID_REAL_IR >> 16) | esid; + break; + case MSR_DR: + *vsid = (VSID_REAL_DR >> 16) | esid; + break; + case MSR_DR|MSR_IR: + { + ulong ea; + ea = esid << SID_SHIFT; + *vsid = find_sr(to_book3s(vcpu), ea)->vsid; + break; + } + default: + BUG(); + } + + return 0; +} + +static bool kvmppc_mmu_book3s_32_is_dcbz32(struct kvm_vcpu *vcpu) +{ + return true; +} + + +void kvmppc_mmu_book3s_32_init(struct kvm_vcpu *vcpu) +{ + struct kvmppc_mmu *mmu = &vcpu->arch.mmu; + + mmu->mtsrin = kvmppc_mmu_book3s_32_mtsrin; + mmu->mfsrin = kvmppc_mmu_book3s_32_mfsrin; + mmu->xlate = kvmppc_mmu_book3s_32_xlate; + mmu->reset_msr = kvmppc_mmu_book3s_32_reset_msr; + mmu->tlbie = kvmppc_mmu_book3s_32_tlbie; + mmu->esid_to_vsid = kvmppc_mmu_book3s_32_esid_to_vsid; + mmu->ea_to_vp = kvmppc_mmu_book3s_32_ea_to_vp; + mmu->is_dcbz32 = kvmppc_mmu_book3s_32_is_dcbz32; + + mmu->slbmte = NULL; + mmu->slbmfee = NULL; + mmu->slbmfev = NULL; + mmu->slbie = NULL; + mmu->slbia = NULL; +} diff --git a/arch/powerpc/kvm/book3s_64_emulate.c b/arch/powerpc/kvm/book3s_64_emulate.c new file mode 100644 index 000000000000..1027eac6d474 --- /dev/null +++ b/arch/powerpc/kvm/book3s_64_emulate.c @@ -0,0 +1,345 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#include <asm/kvm_ppc.h> +#include <asm/disassemble.h> +#include <asm/kvm_book3s.h> +#include <asm/reg.h> + +#define OP_19_XOP_RFID 18 +#define OP_19_XOP_RFI 50 + +#define OP_31_XOP_MFMSR 83 +#define OP_31_XOP_MTMSR 146 +#define OP_31_XOP_MTMSRD 178 +#define OP_31_XOP_MTSRIN 242 +#define OP_31_XOP_TLBIEL 274 +#define OP_31_XOP_TLBIE 306 +#define OP_31_XOP_SLBMTE 402 +#define OP_31_XOP_SLBIE 434 +#define OP_31_XOP_SLBIA 498 +#define OP_31_XOP_MFSRIN 659 +#define OP_31_XOP_SLBMFEV 851 +#define OP_31_XOP_EIOIO 854 +#define OP_31_XOP_SLBMFEE 915 + +/* DCBZ is actually 1014, but we patch it to 1010 so we get a trap */ +#define OP_31_XOP_DCBZ 1010 + +int kvmppc_core_emulate_op(struct kvm_run *run, struct kvm_vcpu *vcpu, + unsigned int inst, int *advance) +{ + int emulated = EMULATE_DONE; + + switch (get_op(inst)) { + case 19: + switch (get_xop(inst)) { + case OP_19_XOP_RFID: + case OP_19_XOP_RFI: + vcpu->arch.pc = vcpu->arch.srr0; + kvmppc_set_msr(vcpu, vcpu->arch.srr1); + *advance = 0; + break; + + default: + emulated = EMULATE_FAIL; + break; + } + break; + case 31: + switch (get_xop(inst)) { + case OP_31_XOP_MFMSR: + vcpu->arch.gpr[get_rt(inst)] = vcpu->arch.msr; + break; + case OP_31_XOP_MTMSRD: + { + ulong rs = vcpu->arch.gpr[get_rs(inst)]; + if (inst & 0x10000) { + vcpu->arch.msr &= ~(MSR_RI | MSR_EE); + vcpu->arch.msr |= rs & (MSR_RI | MSR_EE); + } else + kvmppc_set_msr(vcpu, rs); + break; + } + case OP_31_XOP_MTMSR: + kvmppc_set_msr(vcpu, vcpu->arch.gpr[get_rs(inst)]); + break; + case OP_31_XOP_MFSRIN: + { + int srnum; + + srnum = (vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf; + if (vcpu->arch.mmu.mfsrin) { + u32 sr; + sr = vcpu->arch.mmu.mfsrin(vcpu, srnum); + vcpu->arch.gpr[get_rt(inst)] = sr; + } + break; + } + case OP_31_XOP_MTSRIN: + vcpu->arch.mmu.mtsrin(vcpu, + (vcpu->arch.gpr[get_rb(inst)] >> 28) & 0xf, + vcpu->arch.gpr[get_rs(inst)]); + break; + case OP_31_XOP_TLBIE: + case OP_31_XOP_TLBIEL: + { + bool large = (inst & 0x00200000) ? true : false; + ulong addr = vcpu->arch.gpr[get_rb(inst)]; + vcpu->arch.mmu.tlbie(vcpu, addr, large); + break; + } + case OP_31_XOP_EIOIO: + break; + case OP_31_XOP_SLBMTE: + if (!vcpu->arch.mmu.slbmte) + return EMULATE_FAIL; + + vcpu->arch.mmu.slbmte(vcpu, vcpu->arch.gpr[get_rs(inst)], + vcpu->arch.gpr[get_rb(inst)]); + break; + case OP_31_XOP_SLBIE: + if (!vcpu->arch.mmu.slbie) + return EMULATE_FAIL; + + vcpu->arch.mmu.slbie(vcpu, vcpu->arch.gpr[get_rb(inst)]); + break; + case OP_31_XOP_SLBIA: + if (!vcpu->arch.mmu.slbia) + return EMULATE_FAIL; + + vcpu->arch.mmu.slbia(vcpu); + break; + case OP_31_XOP_SLBMFEE: + if (!vcpu->arch.mmu.slbmfee) { + emulated = EMULATE_FAIL; + } else { + ulong t, rb; + + rb = vcpu->arch.gpr[get_rb(inst)]; + t = vcpu->arch.mmu.slbmfee(vcpu, rb); + vcpu->arch.gpr[get_rt(inst)] = t; + } + break; + case OP_31_XOP_SLBMFEV: + if (!vcpu->arch.mmu.slbmfev) { + emulated = EMULATE_FAIL; + } else { + ulong t, rb; + + rb = vcpu->arch.gpr[get_rb(inst)]; + t = vcpu->arch.mmu.slbmfev(vcpu, rb); + vcpu->arch.gpr[get_rt(inst)] = t; + } + break; + case OP_31_XOP_DCBZ: + { + ulong rb = vcpu->arch.gpr[get_rb(inst)]; + ulong ra = 0; + ulong addr; + u32 zeros[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; + + if (get_ra(inst)) + ra = vcpu->arch.gpr[get_ra(inst)]; + + addr = (ra + rb) & ~31ULL; + if (!(vcpu->arch.msr & MSR_SF)) + addr &= 0xffffffff; + + if (kvmppc_st(vcpu, addr, 32, zeros)) { + vcpu->arch.dear = addr; + vcpu->arch.fault_dear = addr; + to_book3s(vcpu)->dsisr = DSISR_PROTFAULT | + DSISR_ISSTORE; + kvmppc_book3s_queue_irqprio(vcpu, + BOOK3S_INTERRUPT_DATA_STORAGE); + kvmppc_mmu_pte_flush(vcpu, addr, ~0xFFFULL); + } + + break; + } + default: + emulated = EMULATE_FAIL; + } + break; + default: + emulated = EMULATE_FAIL; + } + + return emulated; +} + +void kvmppc_set_bat(struct kvm_vcpu *vcpu, struct kvmppc_bat *bat, bool upper, + u32 val) +{ + if (upper) { + /* Upper BAT */ + u32 bl = (val >> 2) & 0x7ff; + bat->bepi_mask = (~bl << 17); + bat->bepi = val & 0xfffe0000; + bat->vs = (val & 2) ? 1 : 0; + bat->vp = (val & 1) ? 1 : 0; + bat->raw = (bat->raw & 0xffffffff00000000ULL) | val; + } else { + /* Lower BAT */ + bat->brpn = val & 0xfffe0000; + bat->wimg = (val >> 3) & 0xf; + bat->pp = val & 3; + bat->raw = (bat->raw & 0x00000000ffffffffULL) | ((u64)val << 32); + } +} + +static void kvmppc_write_bat(struct kvm_vcpu *vcpu, int sprn, u32 val) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + struct kvmppc_bat *bat; + + switch (sprn) { + case SPRN_IBAT0U ... SPRN_IBAT3L: + bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT0U) / 2]; + break; + case SPRN_IBAT4U ... SPRN_IBAT7L: + bat = &vcpu_book3s->ibat[(sprn - SPRN_IBAT4U) / 2]; + break; + case SPRN_DBAT0U ... SPRN_DBAT3L: + bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT0U) / 2]; + break; + case SPRN_DBAT4U ... SPRN_DBAT7L: + bat = &vcpu_book3s->dbat[(sprn - SPRN_DBAT4U) / 2]; + break; + default: + BUG(); + } + + kvmppc_set_bat(vcpu, bat, !(sprn % 2), val); +} + +int kvmppc_core_emulate_mtspr(struct kvm_vcpu *vcpu, int sprn, int rs) +{ + int emulated = EMULATE_DONE; + + switch (sprn) { + case SPRN_SDR1: + to_book3s(vcpu)->sdr1 = vcpu->arch.gpr[rs]; + break; + case SPRN_DSISR: + to_book3s(vcpu)->dsisr = vcpu->arch.gpr[rs]; + break; + case SPRN_DAR: + vcpu->arch.dear = vcpu->arch.gpr[rs]; + break; + case SPRN_HIOR: + to_book3s(vcpu)->hior = vcpu->arch.gpr[rs]; + break; + case SPRN_IBAT0U ... SPRN_IBAT3L: + case SPRN_IBAT4U ... SPRN_IBAT7L: + case SPRN_DBAT0U ... SPRN_DBAT3L: + case SPRN_DBAT4U ... SPRN_DBAT7L: + kvmppc_write_bat(vcpu, sprn, (u32)vcpu->arch.gpr[rs]); + /* BAT writes happen so rarely that we're ok to flush + * everything here */ + kvmppc_mmu_pte_flush(vcpu, 0, 0); + break; + case SPRN_HID0: + to_book3s(vcpu)->hid[0] = vcpu->arch.gpr[rs]; + break; + case SPRN_HID1: + to_book3s(vcpu)->hid[1] = vcpu->arch.gpr[rs]; + break; + case SPRN_HID2: + to_book3s(vcpu)->hid[2] = vcpu->arch.gpr[rs]; + break; + case SPRN_HID4: + to_book3s(vcpu)->hid[4] = vcpu->arch.gpr[rs]; + break; + case SPRN_HID5: + to_book3s(vcpu)->hid[5] = vcpu->arch.gpr[rs]; + /* guest HID5 set can change is_dcbz32 */ + if (vcpu->arch.mmu.is_dcbz32(vcpu) && + (mfmsr() & MSR_HV)) + vcpu->arch.hflags |= BOOK3S_HFLAG_DCBZ32; + break; + case SPRN_ICTC: + case SPRN_THRM1: + case SPRN_THRM2: + case SPRN_THRM3: + case SPRN_CTRLF: + case SPRN_CTRLT: + break; + default: + printk(KERN_INFO "KVM: invalid SPR write: %d\n", sprn); +#ifndef DEBUG_SPR + emulated = EMULATE_FAIL; +#endif + break; + } + + return emulated; +} + +int kvmppc_core_emulate_mfspr(struct kvm_vcpu *vcpu, int sprn, int rt) +{ + int emulated = EMULATE_DONE; + + switch (sprn) { + case SPRN_SDR1: + vcpu->arch.gpr[rt] = to_book3s(vcpu)->sdr1; + break; + case SPRN_DSISR: + vcpu->arch.gpr[rt] = to_book3s(vcpu)->dsisr; + break; + case SPRN_DAR: + vcpu->arch.gpr[rt] = vcpu->arch.dear; + break; + case SPRN_HIOR: + vcpu->arch.gpr[rt] = to_book3s(vcpu)->hior; + break; + case SPRN_HID0: + vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[0]; + break; + case SPRN_HID1: + vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[1]; + break; + case SPRN_HID2: + vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[2]; + break; + case SPRN_HID4: + vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[4]; + break; + case SPRN_HID5: + vcpu->arch.gpr[rt] = to_book3s(vcpu)->hid[5]; + break; + case SPRN_THRM1: + case SPRN_THRM2: + case SPRN_THRM3: + case SPRN_CTRLF: + case SPRN_CTRLT: + vcpu->arch.gpr[rt] = 0; + break; + default: + printk(KERN_INFO "KVM: invalid SPR read: %d\n", sprn); +#ifndef DEBUG_SPR + emulated = EMULATE_FAIL; +#endif + break; + } + + return emulated; +} + diff --git a/arch/powerpc/kvm/book3s_64_exports.c b/arch/powerpc/kvm/book3s_64_exports.c new file mode 100644 index 000000000000..5b2db38ed86c --- /dev/null +++ b/arch/powerpc/kvm/book3s_64_exports.c @@ -0,0 +1,24 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#include <linux/module.h> +#include <asm/kvm_book3s.h> + +EXPORT_SYMBOL_GPL(kvmppc_trampoline_enter); +EXPORT_SYMBOL_GPL(kvmppc_trampoline_lowmem); diff --git a/arch/powerpc/kvm/book3s_64_interrupts.S b/arch/powerpc/kvm/book3s_64_interrupts.S new file mode 100644 index 000000000000..7b55d8094c8b --- /dev/null +++ b/arch/powerpc/kvm/book3s_64_interrupts.S @@ -0,0 +1,392 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#include <asm/ppc_asm.h> +#include <asm/kvm_asm.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> +#include <asm/exception-64s.h> + +#define KVMPPC_HANDLE_EXIT .kvmppc_handle_exit +#define ULONG_SIZE 8 +#define VCPU_GPR(n) (VCPU_GPRS + (n * ULONG_SIZE)) + +.macro mfpaca tmp_reg, src_reg, offset, vcpu_reg + ld \tmp_reg, (PACA_EXMC+\offset)(r13) + std \tmp_reg, VCPU_GPR(\src_reg)(\vcpu_reg) +.endm + +.macro DISABLE_INTERRUPTS + mfmsr r0 + rldicl r0,r0,48,1 + rotldi r0,r0,16 + mtmsrd r0,1 +.endm + +/***************************************************************************** + * * + * Guest entry / exit code that is in kernel module memory (highmem) * + * * + ****************************************************************************/ + +/* Registers: + * r3: kvm_run pointer + * r4: vcpu pointer + */ +_GLOBAL(__kvmppc_vcpu_entry) + +kvm_start_entry: + /* Write correct stack frame */ + mflr r0 + std r0,16(r1) + + /* Save host state to the stack */ + stdu r1, -SWITCH_FRAME_SIZE(r1) + + /* Save r3 (kvm_run) and r4 (vcpu) */ + SAVE_2GPRS(3, r1) + + /* Save non-volatile registers (r14 - r31) */ + SAVE_NVGPRS(r1) + + /* Save LR */ + mflr r14 + std r14, _LINK(r1) + +/* XXX optimize non-volatile loading away */ +kvm_start_lightweight: + + DISABLE_INTERRUPTS + + /* Save R1/R2 in the PACA */ + std r1, PACAR1(r13) + std r2, (PACA_EXMC+EX_SRR0)(r13) + ld r3, VCPU_HIGHMEM_HANDLER(r4) + std r3, PACASAVEDMSR(r13) + + /* Load non-volatile guest state from the vcpu */ + ld r14, VCPU_GPR(r14)(r4) + ld r15, VCPU_GPR(r15)(r4) + ld r16, VCPU_GPR(r16)(r4) + ld r17, VCPU_GPR(r17)(r4) + ld r18, VCPU_GPR(r18)(r4) + ld r19, VCPU_GPR(r19)(r4) + ld r20, VCPU_GPR(r20)(r4) + ld r21, VCPU_GPR(r21)(r4) + ld r22, VCPU_GPR(r22)(r4) + ld r23, VCPU_GPR(r23)(r4) + ld r24, VCPU_GPR(r24)(r4) + ld r25, VCPU_GPR(r25)(r4) + ld r26, VCPU_GPR(r26)(r4) + ld r27, VCPU_GPR(r27)(r4) + ld r28, VCPU_GPR(r28)(r4) + ld r29, VCPU_GPR(r29)(r4) + ld r30, VCPU_GPR(r30)(r4) + ld r31, VCPU_GPR(r31)(r4) + + ld r9, VCPU_PC(r4) /* r9 = vcpu->arch.pc */ + ld r10, VCPU_SHADOW_MSR(r4) /* r10 = vcpu->arch.shadow_msr */ + + ld r3, VCPU_TRAMPOLINE_ENTER(r4) + mtsrr0 r3 + + LOAD_REG_IMMEDIATE(r3, MSR_KERNEL & ~(MSR_IR | MSR_DR)) + mtsrr1 r3 + + /* Load guest state in the respective registers */ + lwz r3, VCPU_CR(r4) /* r3 = vcpu->arch.cr */ + stw r3, (PACA_EXMC + EX_CCR)(r13) + + ld r3, VCPU_CTR(r4) /* r3 = vcpu->arch.ctr */ + mtctr r3 /* CTR = r3 */ + + ld r3, VCPU_LR(r4) /* r3 = vcpu->arch.lr */ + mtlr r3 /* LR = r3 */ + + ld r3, VCPU_XER(r4) /* r3 = vcpu->arch.xer */ + std r3, (PACA_EXMC + EX_R3)(r13) + + /* Some guests may need to have dcbz set to 32 byte length. + * + * Usually we ensure that by patching the guest's instructions + * to trap on dcbz and emulate it in the hypervisor. + * + * If we can, we should tell the CPU to use 32 byte dcbz though, + * because that's a lot faster. + */ + + ld r3, VCPU_HFLAGS(r4) + rldicl. r3, r3, 0, 63 /* CR = ((r3 & 1) == 0) */ + beq no_dcbz32_on + + mfspr r3,SPRN_HID5 + ori r3, r3, 0x80 /* XXX HID5_dcbz32 = 0x80 */ + mtspr SPRN_HID5,r3 + +no_dcbz32_on: + /* Load guest GPRs */ + + ld r3, VCPU_GPR(r9)(r4) + std r3, (PACA_EXMC + EX_R9)(r13) + ld r3, VCPU_GPR(r10)(r4) + std r3, (PACA_EXMC + EX_R10)(r13) + ld r3, VCPU_GPR(r11)(r4) + std r3, (PACA_EXMC + EX_R11)(r13) + ld r3, VCPU_GPR(r12)(r4) + std r3, (PACA_EXMC + EX_R12)(r13) + ld r3, VCPU_GPR(r13)(r4) + std r3, (PACA_EXMC + EX_R13)(r13) + + ld r0, VCPU_GPR(r0)(r4) + ld r1, VCPU_GPR(r1)(r4) + ld r2, VCPU_GPR(r2)(r4) + ld r3, VCPU_GPR(r3)(r4) + ld r5, VCPU_GPR(r5)(r4) + ld r6, VCPU_GPR(r6)(r4) + ld r7, VCPU_GPR(r7)(r4) + ld r8, VCPU_GPR(r8)(r4) + ld r4, VCPU_GPR(r4)(r4) + + /* This sets the Magic value for the trampoline */ + + li r11, 1 + stb r11, PACA_KVM_IN_GUEST(r13) + + /* Jump to SLB patching handlder and into our guest */ + RFI + +/* + * This is the handler in module memory. It gets jumped at from the + * lowmem trampoline code, so it's basically the guest exit code. + * + */ + +.global kvmppc_handler_highmem +kvmppc_handler_highmem: + + /* + * Register usage at this point: + * + * R00 = guest R13 + * R01 = host R1 + * R02 = host R2 + * R10 = guest PC + * R11 = guest MSR + * R12 = exit handler id + * R13 = PACA + * PACA.exmc.R9 = guest R1 + * PACA.exmc.R10 = guest R10 + * PACA.exmc.R11 = guest R11 + * PACA.exmc.R12 = guest R12 + * PACA.exmc.R13 = guest R2 + * PACA.exmc.DAR = guest DAR + * PACA.exmc.DSISR = guest DSISR + * PACA.exmc.LR = guest instruction + * PACA.exmc.CCR = guest CR + * PACA.exmc.SRR0 = guest R0 + * + */ + + std r3, (PACA_EXMC+EX_R3)(r13) + + /* save the exit id in R3 */ + mr r3, r12 + + /* R12 = vcpu */ + ld r12, GPR4(r1) + + /* Now save the guest state */ + + std r0, VCPU_GPR(r13)(r12) + std r4, VCPU_GPR(r4)(r12) + std r5, VCPU_GPR(r5)(r12) + std r6, VCPU_GPR(r6)(r12) + std r7, VCPU_GPR(r7)(r12) + std r8, VCPU_GPR(r8)(r12) + std r9, VCPU_GPR(r9)(r12) + + /* get registers from PACA */ + mfpaca r5, r0, EX_SRR0, r12 + mfpaca r5, r3, EX_R3, r12 + mfpaca r5, r1, EX_R9, r12 + mfpaca r5, r10, EX_R10, r12 + mfpaca r5, r11, EX_R11, r12 + mfpaca r5, r12, EX_R12, r12 + mfpaca r5, r2, EX_R13, r12 + + lwz r5, (PACA_EXMC+EX_LR)(r13) + stw r5, VCPU_LAST_INST(r12) + + lwz r5, (PACA_EXMC+EX_CCR)(r13) + stw r5, VCPU_CR(r12) + + ld r5, VCPU_HFLAGS(r12) + rldicl. r5, r5, 0, 63 /* CR = ((r5 & 1) == 0) */ + beq no_dcbz32_off + + mfspr r5,SPRN_HID5 + rldimi r5,r5,6,56 + mtspr SPRN_HID5,r5 + +no_dcbz32_off: + + /* XXX maybe skip on lightweight? */ + std r14, VCPU_GPR(r14)(r12) + std r15, VCPU_GPR(r15)(r12) + std r16, VCPU_GPR(r16)(r12) + std r17, VCPU_GPR(r17)(r12) + std r18, VCPU_GPR(r18)(r12) + std r19, VCPU_GPR(r19)(r12) + std r20, VCPU_GPR(r20)(r12) + std r21, VCPU_GPR(r21)(r12) + std r22, VCPU_GPR(r22)(r12) + std r23, VCPU_GPR(r23)(r12) + std r24, VCPU_GPR(r24)(r12) + std r25, VCPU_GPR(r25)(r12) + std r26, VCPU_GPR(r26)(r12) + std r27, VCPU_GPR(r27)(r12) + std r28, VCPU_GPR(r28)(r12) + std r29, VCPU_GPR(r29)(r12) + std r30, VCPU_GPR(r30)(r12) + std r31, VCPU_GPR(r31)(r12) + + /* Restore non-volatile host registers (r14 - r31) */ + REST_NVGPRS(r1) + + /* Save guest PC (R10) */ + std r10, VCPU_PC(r12) + + /* Save guest msr (R11) */ + std r11, VCPU_SHADOW_MSR(r12) + + /* Save guest CTR (in R12) */ + mfctr r5 + std r5, VCPU_CTR(r12) + + /* Save guest LR */ + mflr r5 + std r5, VCPU_LR(r12) + + /* Save guest XER */ + mfxer r5 + std r5, VCPU_XER(r12) + + /* Save guest DAR */ + ld r5, (PACA_EXMC+EX_DAR)(r13) + std r5, VCPU_FAULT_DEAR(r12) + + /* Save guest DSISR */ + lwz r5, (PACA_EXMC+EX_DSISR)(r13) + std r5, VCPU_FAULT_DSISR(r12) + + /* Restore host msr -> SRR1 */ + ld r7, VCPU_HOST_MSR(r12) + mtsrr1 r7 + + /* Restore host IP -> SRR0 */ + ld r6, VCPU_HOST_RETIP(r12) + mtsrr0 r6 + + /* + * For some interrupts, we need to call the real Linux + * handler, so it can do work for us. This has to happen + * as if the interrupt arrived from the kernel though, + * so let's fake it here where most state is restored. + * + * Call Linux for hardware interrupts/decrementer + * r3 = address of interrupt handler (exit reason) + */ + + cmpwi r3, BOOK3S_INTERRUPT_EXTERNAL + beq call_linux_handler + cmpwi r3, BOOK3S_INTERRUPT_DECREMENTER + beq call_linux_handler + + /* Back to Interruptable Mode! (goto kvm_return_point) */ + RFI + +call_linux_handler: + + /* + * If we land here we need to jump back to the handler we + * came from. + * + * We have a page that we can access from real mode, so let's + * jump back to that and use it as a trampoline to get back into the + * interrupt handler! + * + * R3 still contains the exit code, + * R6 VCPU_HOST_RETIP and + * R7 VCPU_HOST_MSR + */ + + mtlr r3 + + ld r5, VCPU_TRAMPOLINE_LOWMEM(r12) + mtsrr0 r5 + LOAD_REG_IMMEDIATE(r5, MSR_KERNEL & ~(MSR_IR | MSR_DR)) + mtsrr1 r5 + + RFI + +.global kvm_return_point +kvm_return_point: + + /* Jump back to lightweight entry if we're supposed to */ + /* go back into the guest */ + mr r5, r3 + /* Restore r3 (kvm_run) and r4 (vcpu) */ + REST_2GPRS(3, r1) + bl KVMPPC_HANDLE_EXIT + +#if 0 /* XXX get lightweight exits back */ + cmpwi r3, RESUME_GUEST + bne kvm_exit_heavyweight + + /* put VCPU and KVM_RUN back into place and roll again! */ + REST_2GPRS(3, r1) + b kvm_start_lightweight + +kvm_exit_heavyweight: + /* Restore non-volatile host registers */ + ld r14, _LINK(r1) + mtlr r14 + REST_NVGPRS(r1) + + addi r1, r1, SWITCH_FRAME_SIZE +#else + ld r4, _LINK(r1) + mtlr r4 + + cmpwi r3, RESUME_GUEST + bne kvm_exit_heavyweight + + REST_2GPRS(3, r1) + + addi r1, r1, SWITCH_FRAME_SIZE + + b kvm_start_entry + +kvm_exit_heavyweight: + + addi r1, r1, SWITCH_FRAME_SIZE +#endif + + blr diff --git a/arch/powerpc/kvm/book3s_64_mmu.c b/arch/powerpc/kvm/book3s_64_mmu.c new file mode 100644 index 000000000000..5598f88f142e --- /dev/null +++ b/arch/powerpc/kvm/book3s_64_mmu.c @@ -0,0 +1,478 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/kvm.h> +#include <linux/kvm_host.h> +#include <linux/highmem.h> + +#include <asm/tlbflush.h> +#include <asm/kvm_ppc.h> +#include <asm/kvm_book3s.h> + +/* #define DEBUG_MMU */ + +#ifdef DEBUG_MMU +#define dprintk(X...) printk(KERN_INFO X) +#else +#define dprintk(X...) do { } while(0) +#endif + +static void kvmppc_mmu_book3s_64_reset_msr(struct kvm_vcpu *vcpu) +{ + kvmppc_set_msr(vcpu, MSR_SF); +} + +static struct kvmppc_slb *kvmppc_mmu_book3s_64_find_slbe( + struct kvmppc_vcpu_book3s *vcpu_book3s, + gva_t eaddr) +{ + int i; + u64 esid = GET_ESID(eaddr); + u64 esid_1t = GET_ESID_1T(eaddr); + + for (i = 0; i < vcpu_book3s->slb_nr; i++) { + u64 cmp_esid = esid; + + if (!vcpu_book3s->slb[i].valid) + continue; + + if (vcpu_book3s->slb[i].large) + cmp_esid = esid_1t; + + if (vcpu_book3s->slb[i].esid == cmp_esid) + return &vcpu_book3s->slb[i]; + } + + dprintk("KVM: No SLB entry found for 0x%lx [%llx | %llx]\n", + eaddr, esid, esid_1t); + for (i = 0; i < vcpu_book3s->slb_nr; i++) { + if (vcpu_book3s->slb[i].vsid) + dprintk(" %d: %c%c %llx %llx\n", i, + vcpu_book3s->slb[i].valid ? 'v' : ' ', + vcpu_book3s->slb[i].large ? 'l' : ' ', + vcpu_book3s->slb[i].esid, + vcpu_book3s->slb[i].vsid); + } + + return NULL; +} + +static u64 kvmppc_mmu_book3s_64_ea_to_vp(struct kvm_vcpu *vcpu, gva_t eaddr, + bool data) +{ + struct kvmppc_slb *slb; + + slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), eaddr); + if (!slb) + return 0; + + if (slb->large) + return (((u64)eaddr >> 12) & 0xfffffff) | + (((u64)slb->vsid) << 28); + + return (((u64)eaddr >> 12) & 0xffff) | (((u64)slb->vsid) << 16); +} + +static int kvmppc_mmu_book3s_64_get_pagesize(struct kvmppc_slb *slbe) +{ + return slbe->large ? 24 : 12; +} + +static u32 kvmppc_mmu_book3s_64_get_page(struct kvmppc_slb *slbe, gva_t eaddr) +{ + int p = kvmppc_mmu_book3s_64_get_pagesize(slbe); + return ((eaddr & 0xfffffff) >> p); +} + +static hva_t kvmppc_mmu_book3s_64_get_pteg( + struct kvmppc_vcpu_book3s *vcpu_book3s, + struct kvmppc_slb *slbe, gva_t eaddr, + bool second) +{ + u64 hash, pteg, htabsize; + u32 page; + hva_t r; + + page = kvmppc_mmu_book3s_64_get_page(slbe, eaddr); + htabsize = ((1 << ((vcpu_book3s->sdr1 & 0x1f) + 11)) - 1); + + hash = slbe->vsid ^ page; + if (second) + hash = ~hash; + hash &= ((1ULL << 39ULL) - 1ULL); + hash &= htabsize; + hash <<= 7ULL; + + pteg = vcpu_book3s->sdr1 & 0xfffffffffffc0000ULL; + pteg |= hash; + + dprintk("MMU: page=0x%x sdr1=0x%llx pteg=0x%llx vsid=0x%llx\n", + page, vcpu_book3s->sdr1, pteg, slbe->vsid); + + r = gfn_to_hva(vcpu_book3s->vcpu.kvm, pteg >> PAGE_SHIFT); + if (kvm_is_error_hva(r)) + return r; + return r | (pteg & ~PAGE_MASK); +} + +static u64 kvmppc_mmu_book3s_64_get_avpn(struct kvmppc_slb *slbe, gva_t eaddr) +{ + int p = kvmppc_mmu_book3s_64_get_pagesize(slbe); + u64 avpn; + + avpn = kvmppc_mmu_book3s_64_get_page(slbe, eaddr); + avpn |= slbe->vsid << (28 - p); + + if (p < 24) + avpn >>= ((80 - p) - 56) - 8; + else + avpn <<= 8; + + return avpn; +} + +static int kvmppc_mmu_book3s_64_xlate(struct kvm_vcpu *vcpu, gva_t eaddr, + struct kvmppc_pte *gpte, bool data) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + struct kvmppc_slb *slbe; + hva_t ptegp; + u64 pteg[16]; + u64 avpn = 0; + int i; + u8 key = 0; + bool found = false; + bool perm_err = false; + int second = 0; + + slbe = kvmppc_mmu_book3s_64_find_slbe(vcpu_book3s, eaddr); + if (!slbe) + goto no_seg_found; + +do_second: + ptegp = kvmppc_mmu_book3s_64_get_pteg(vcpu_book3s, slbe, eaddr, second); + if (kvm_is_error_hva(ptegp)) + goto no_page_found; + + avpn = kvmppc_mmu_book3s_64_get_avpn(slbe, eaddr); + + if(copy_from_user(pteg, (void __user *)ptegp, sizeof(pteg))) { + printk(KERN_ERR "KVM can't copy data from 0x%lx!\n", ptegp); + goto no_page_found; + } + + if ((vcpu->arch.msr & MSR_PR) && slbe->Kp) + key = 4; + else if (!(vcpu->arch.msr & MSR_PR) && slbe->Ks) + key = 4; + + for (i=0; i<16; i+=2) { + u64 v = pteg[i]; + u64 r = pteg[i+1]; + + /* Valid check */ + if (!(v & HPTE_V_VALID)) + continue; + /* Hash check */ + if ((v & HPTE_V_SECONDARY) != second) + continue; + + /* AVPN compare */ + if (HPTE_V_AVPN_VAL(avpn) == HPTE_V_AVPN_VAL(v)) { + u8 pp = (r & HPTE_R_PP) | key; + int eaddr_mask = 0xFFF; + + gpte->eaddr = eaddr; + gpte->vpage = kvmppc_mmu_book3s_64_ea_to_vp(vcpu, + eaddr, + data); + if (slbe->large) + eaddr_mask = 0xFFFFFF; + gpte->raddr = (r & HPTE_R_RPN) | (eaddr & eaddr_mask); + gpte->may_execute = ((r & HPTE_R_N) ? false : true); + gpte->may_read = false; + gpte->may_write = false; + + switch (pp) { + case 0: + case 1: + case 2: + case 6: + gpte->may_write = true; + /* fall through */ + case 3: + case 5: + case 7: + gpte->may_read = true; + break; + } + + if (!gpte->may_read) { + perm_err = true; + continue; + } + + dprintk("KVM MMU: Translated 0x%lx [0x%llx] -> 0x%llx " + "-> 0x%llx\n", + eaddr, avpn, gpte->vpage, gpte->raddr); + found = true; + break; + } + } + + /* Update PTE R and C bits, so the guest's swapper knows we used the + * page */ + if (found) { + u32 oldr = pteg[i+1]; + + if (gpte->may_read) { + /* Set the accessed flag */ + pteg[i+1] |= HPTE_R_R; + } + if (gpte->may_write) { + /* Set the dirty flag */ + pteg[i+1] |= HPTE_R_C; + } else { + dprintk("KVM: Mapping read-only page!\n"); + } + + /* Write back into the PTEG */ + if (pteg[i+1] != oldr) + copy_to_user((void __user *)ptegp, pteg, sizeof(pteg)); + + return 0; + } else { + dprintk("KVM MMU: No PTE found (ea=0x%lx sdr1=0x%llx " + "ptegp=0x%lx)\n", + eaddr, to_book3s(vcpu)->sdr1, ptegp); + for (i = 0; i < 16; i += 2) + dprintk(" %02d: 0x%llx - 0x%llx (0x%llx)\n", + i, pteg[i], pteg[i+1], avpn); + + if (!second) { + second = HPTE_V_SECONDARY; + goto do_second; + } + } + + +no_page_found: + + + if (perm_err) + return -EPERM; + + return -ENOENT; + +no_seg_found: + + dprintk("KVM MMU: Trigger segment fault\n"); + return -EINVAL; +} + +static void kvmppc_mmu_book3s_64_slbmte(struct kvm_vcpu *vcpu, u64 rs, u64 rb) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s; + u64 esid, esid_1t; + int slb_nr; + struct kvmppc_slb *slbe; + + dprintk("KVM MMU: slbmte(0x%llx, 0x%llx)\n", rs, rb); + + vcpu_book3s = to_book3s(vcpu); + + esid = GET_ESID(rb); + esid_1t = GET_ESID_1T(rb); + slb_nr = rb & 0xfff; + + if (slb_nr > vcpu_book3s->slb_nr) + return; + + slbe = &vcpu_book3s->slb[slb_nr]; + + slbe->large = (rs & SLB_VSID_L) ? 1 : 0; + slbe->esid = slbe->large ? esid_1t : esid; + slbe->vsid = rs >> 12; + slbe->valid = (rb & SLB_ESID_V) ? 1 : 0; + slbe->Ks = (rs & SLB_VSID_KS) ? 1 : 0; + slbe->Kp = (rs & SLB_VSID_KP) ? 1 : 0; + slbe->nx = (rs & SLB_VSID_N) ? 1 : 0; + slbe->class = (rs & SLB_VSID_C) ? 1 : 0; + + slbe->orige = rb & (ESID_MASK | SLB_ESID_V); + slbe->origv = rs; + + /* Map the new segment */ + kvmppc_mmu_map_segment(vcpu, esid << SID_SHIFT); +} + +static u64 kvmppc_mmu_book3s_64_slbmfee(struct kvm_vcpu *vcpu, u64 slb_nr) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + struct kvmppc_slb *slbe; + + if (slb_nr > vcpu_book3s->slb_nr) + return 0; + + slbe = &vcpu_book3s->slb[slb_nr]; + + return slbe->orige; +} + +static u64 kvmppc_mmu_book3s_64_slbmfev(struct kvm_vcpu *vcpu, u64 slb_nr) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + struct kvmppc_slb *slbe; + + if (slb_nr > vcpu_book3s->slb_nr) + return 0; + + slbe = &vcpu_book3s->slb[slb_nr]; + + return slbe->origv; +} + +static void kvmppc_mmu_book3s_64_slbie(struct kvm_vcpu *vcpu, u64 ea) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + struct kvmppc_slb *slbe; + + dprintk("KVM MMU: slbie(0x%llx)\n", ea); + + slbe = kvmppc_mmu_book3s_64_find_slbe(vcpu_book3s, ea); + + if (!slbe) + return; + + dprintk("KVM MMU: slbie(0x%llx, 0x%llx)\n", ea, slbe->esid); + + slbe->valid = false; + + kvmppc_mmu_map_segment(vcpu, ea); +} + +static void kvmppc_mmu_book3s_64_slbia(struct kvm_vcpu *vcpu) +{ + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + int i; + + dprintk("KVM MMU: slbia()\n"); + + for (i = 1; i < vcpu_book3s->slb_nr; i++) + vcpu_book3s->slb[i].valid = false; + + if (vcpu->arch.msr & MSR_IR) { + kvmppc_mmu_flush_segments(vcpu); + kvmppc_mmu_map_segment(vcpu, vcpu->arch.pc); + } +} + +static void kvmppc_mmu_book3s_64_mtsrin(struct kvm_vcpu *vcpu, u32 srnum, + ulong value) +{ + u64 rb = 0, rs = 0; + + /* ESID = srnum */ + rb |= (srnum & 0xf) << 28; + /* Set the valid bit */ + rb |= 1 << 27; + /* Index = ESID */ + rb |= srnum; + + /* VSID = VSID */ + rs |= (value & 0xfffffff) << 12; + /* flags = flags */ + rs |= ((value >> 27) & 0xf) << 9; + + kvmppc_mmu_book3s_64_slbmte(vcpu, rs, rb); +} + +static void kvmppc_mmu_book3s_64_tlbie(struct kvm_vcpu *vcpu, ulong va, + bool large) +{ + u64 mask = 0xFFFFFFFFFULL; + + dprintk("KVM MMU: tlbie(0x%lx)\n", va); + + if (large) + mask = 0xFFFFFF000ULL; + kvmppc_mmu_pte_vflush(vcpu, va >> 12, mask); +} + +static int kvmppc_mmu_book3s_64_esid_to_vsid(struct kvm_vcpu *vcpu, u64 esid, + u64 *vsid) +{ + switch (vcpu->arch.msr & (MSR_DR|MSR_IR)) { + case 0: + *vsid = (VSID_REAL >> 16) | esid; + break; + case MSR_IR: + *vsid = (VSID_REAL_IR >> 16) | esid; + break; + case MSR_DR: + *vsid = (VSID_REAL_DR >> 16) | esid; + break; + case MSR_DR|MSR_IR: + { + ulong ea; + struct kvmppc_slb *slb; + ea = esid << SID_SHIFT; + slb = kvmppc_mmu_book3s_64_find_slbe(to_book3s(vcpu), ea); + if (slb) + *vsid = slb->vsid; + else + return -ENOENT; + + break; + } + default: + BUG(); + break; + } + + return 0; +} + +static bool kvmppc_mmu_book3s_64_is_dcbz32(struct kvm_vcpu *vcpu) +{ + return (to_book3s(vcpu)->hid[5] & 0x80); +} + +void kvmppc_mmu_book3s_64_init(struct kvm_vcpu *vcpu) +{ + struct kvmppc_mmu *mmu = &vcpu->arch.mmu; + + mmu->mfsrin = NULL; + mmu->mtsrin = kvmppc_mmu_book3s_64_mtsrin; + mmu->slbmte = kvmppc_mmu_book3s_64_slbmte; + mmu->slbmfee = kvmppc_mmu_book3s_64_slbmfee; + mmu->slbmfev = kvmppc_mmu_book3s_64_slbmfev; + mmu->slbie = kvmppc_mmu_book3s_64_slbie; + mmu->slbia = kvmppc_mmu_book3s_64_slbia; + mmu->xlate = kvmppc_mmu_book3s_64_xlate; + mmu->reset_msr = kvmppc_mmu_book3s_64_reset_msr; + mmu->tlbie = kvmppc_mmu_book3s_64_tlbie; + mmu->esid_to_vsid = kvmppc_mmu_book3s_64_esid_to_vsid; + mmu->ea_to_vp = kvmppc_mmu_book3s_64_ea_to_vp; + mmu->is_dcbz32 = kvmppc_mmu_book3s_64_is_dcbz32; + + vcpu->arch.hflags |= BOOK3S_HFLAG_SLB; +} diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c new file mode 100644 index 000000000000..f2899b297ffd --- /dev/null +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -0,0 +1,408 @@ +/* + * Copyright (C) 2009 SUSE Linux Products GmbH. All rights reserved. + * + * Authors: + * Alexander Graf <agraf@suse.de> + * Kevin Wolf <mail@kevin-wolf.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + +#include <linux/kvm_host.h> + +#include <asm/kvm_ppc.h> +#include <asm/kvm_book3s.h> +#include <asm/mmu-hash64.h> +#include <asm/machdep.h> +#include <asm/mmu_context.h> +#include <asm/hw_irq.h> + +#define PTE_SIZE 12 +#define VSID_ALL 0 + +/* #define DEBUG_MMU */ +/* #define DEBUG_SLB */ + +#ifdef DEBUG_MMU +#define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__) +#else +#define dprintk_mmu(a, ...) do { } while(0) +#endif + +#ifdef DEBUG_SLB +#define dprintk_slb(a, ...) printk(KERN_INFO a, __VA_ARGS__) +#else +#define dprintk_slb(a, ...) do { } while(0) +#endif + +static void invalidate_pte(struct hpte_cache *pte) +{ + dprintk_mmu("KVM: Flushing SPT %d: 0x%llx (0x%llx) -> 0x%llx\n", + i, pte->pte.eaddr, pte->pte.vpage, pte->host_va); + + ppc_md.hpte_invalidate(pte->slot, pte->host_va, + MMU_PAGE_4K, MMU_SEGSIZE_256M, + false); + pte->host_va = 0; + kvm_release_pfn_dirty(pte->pfn); +} + +void kvmppc_mmu_pte_flush(struct kvm_vcpu *vcpu, u64 guest_ea, u64 ea_mask) +{ + int i; + + dprintk_mmu("KVM: Flushing %d Shadow PTEs: 0x%llx & 0x%llx\n", + vcpu->arch.hpte_cache_offset, guest_ea, ea_mask); + BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM); + + guest_ea &= ea_mask; + for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) { + struct hpte_cache *pte; + + pte = &vcpu->arch.hpte_cache[i]; + if (!pte->host_va) + continue; + + if ((pte->pte.eaddr & ea_mask) == guest_ea) { + invalidate_pte(pte); + } + } + + /* Doing a complete flush -> start from scratch */ + if (!ea_mask) + vcpu->arch.hpte_cache_offset = 0; +} + +void kvmppc_mmu_pte_vflush(struct kvm_vcpu *vcpu, u64 guest_vp, u64 vp_mask) +{ + int i; + + dprintk_mmu("KVM: Flushing %d Shadow vPTEs: 0x%llx & 0x%llx\n", + vcpu->arch.hpte_cache_offset, guest_vp, vp_mask); + BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM); + + guest_vp &= vp_mask; + for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) { + struct hpte_cache *pte; + + pte = &vcpu->arch.hpte_cache[i]; + if (!pte->host_va) + continue; + + if ((pte->pte.vpage & vp_mask) == guest_vp) { + invalidate_pte(pte); + } + } +} + +void kvmppc_mmu_pte_pflush(struct kvm_vcpu *vcpu, u64 pa_start, u64 pa_end) +{ + int i; + + dprintk_mmu("KVM: Flushing %d Shadow pPTEs: 0x%llx & 0x%llx\n", + vcpu->arch.hpte_cache_offset, guest_pa, pa_mask); + BUG_ON(vcpu->arch.hpte_cache_offset > HPTEG_CACHE_NUM); + + for (i = 0; i < vcpu->arch.hpte_cache_offset; i++) { + struct hpte_cache *pte; + + pte = &vcpu->arch.hpte_cache[i]; + if (!pte->host_va) + continue; + + if ((pte->pte.raddr >= pa_start) && + (pte->pte.raddr < pa_end)) { + invalidate_pte(pte); + } + } +} + +struct kvmppc_pte *kvmppc_mmu_find_pte(struct kvm_vcpu *vcpu, u64 ea, bool data) +{ + int i; + u64 guest_vp; + + guest_vp = vcpu->arch.mmu.ea_to_vp(vcpu, ea, false); + for (i=0; i<vcpu->arch.hpte_cache_offset; i++) { + struct hpte_cache *pte; + + pte = &vcpu->arch.hpte_cache[i]; + if (!pte->host_va) + continue; + + if (pte->pte.vpage == guest_vp) + return &pte->pte; + } + + return NULL; +} + +static int kvmppc_mmu_hpte_cache_next(struct kvm_vcpu *vcpu) +{ + if (vcpu->arch.hpte_cache_offset == HPTEG_CACHE_NUM) + kvmppc_mmu_pte_flush(vcpu, 0, 0); + + return vcpu->arch.hpte_cache_offset++; +} + +/* We keep 512 gvsid->hvsid entries, mapping the guest ones to the array using + * a hash, so we don't waste cycles on looping */ +static u16 kvmppc_sid_hash(struct kvm_vcpu *vcpu, u64 gvsid) +{ + return (u16)(((gvsid >> (SID_MAP_BITS * 7)) & SID_MAP_MASK) ^ + ((gvsid >> (SID_MAP_BITS * 6)) & SID_MAP_MASK) ^ + ((gvsid >> (SID_MAP_BITS * 5)) & SID_MAP_MASK) ^ + ((gvsid >> (SID_MAP_BITS * 4)) & SID_MAP_MASK) ^ + ((gvsid >> (SID_MAP_BITS * 3)) & SID_MAP_MASK) ^ + ((gvsid >> (SID_MAP_BITS * 2)) & SID_MAP_MASK) ^ + ((gvsid >> (SID_MAP_BITS * 1)) & SID_MAP_MASK) ^ + ((gvsid >> (SID_MAP_BITS * 0)) & SID_MAP_MASK)); +} + + +static struct kvmppc_sid_map *find_sid_vsid(struct kvm_vcpu *vcpu, u64 gvsid) +{ + struct kvmppc_sid_map *map; + u16 sid_map_mask; + + if (vcpu->arch.msr & MSR_PR) + gvsid |= VSID_PR; + + sid_map_mask = kvmppc_sid_hash(vcpu, gvsid); + map = &to_book3s(vcpu)->sid_map[sid_map_mask]; + if (map->guest_vsid == gvsid) { + dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n", + gvsid, map->host_vsid); + return map; + } + + map = &to_book3s(vcpu)->sid_map[SID_MAP_MASK - sid_map_mask]; + if (map->guest_vsid == gvsid) { + dprintk_slb("SLB: Searching 0x%llx -> 0x%llx\n", + gvsid, map->host_vsid); + return map; + } + + dprintk_slb("SLB: Searching 0x%llx -> not found\n", gvsid); + return NULL; +} + +int kvmppc_mmu_map_page(struct kvm_vcpu *vcpu, struct kvmppc_pte *orig_pte) +{ + pfn_t hpaddr; + ulong hash, hpteg, va; + u64 vsid; + int ret; + int rflags = 0x192; + int vflags = 0; + int attempt = 0; + struct kvmppc_sid_map *map; + + /* Get host physical address for gpa */ + hpaddr = gfn_to_pfn(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT); + if (kvm_is_error_hva(hpaddr)) { + printk(KERN_INFO "Couldn't get guest page for gfn %llx!\n", orig_pte->eaddr); + return -EINVAL; + } + hpaddr <<= PAGE_SHIFT; +#if PAGE_SHIFT == 12 +#elif PAGE_SHIFT == 16 + hpaddr |= orig_pte->raddr & 0xf000; +#else +#error Unknown page size +#endif + + /* and write the mapping ea -> hpa into the pt */ + vcpu->arch.mmu.esid_to_vsid(vcpu, orig_pte->eaddr >> SID_SHIFT, &vsid); + map = find_sid_vsid(vcpu, vsid); + if (!map) { + kvmppc_mmu_map_segment(vcpu, orig_pte->eaddr); + map = find_sid_vsid(vcpu, vsid); + } + BUG_ON(!map); + + vsid = map->host_vsid; + va = hpt_va(orig_pte->eaddr, vsid, MMU_SEGSIZE_256M); + + if (!orig_pte->may_write) + rflags |= HPTE_R_PP; + else + mark_page_dirty(vcpu->kvm, orig_pte->raddr >> PAGE_SHIFT); + + if (!orig_pte->may_execute) + rflags |= HPTE_R_N; + + hash = hpt_hash(va, PTE_SIZE, MMU_SEGSIZE_256M); + +map_again: + hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); + + /* In case we tried normal mapping already, let's nuke old entries */ + if (attempt > 1) + if (ppc_md.hpte_remove(hpteg) < 0) + return -1; + + ret = ppc_md.hpte_insert(hpteg, va, hpaddr, rflags, vflags, MMU_PAGE_4K, MMU_SEGSIZE_256M); + + if (ret < 0) { + /* If we couldn't map a primary PTE, try a secondary */ +#ifdef USE_SECONDARY + hash = ~hash; + attempt++; + if (attempt % 2) + vflags = HPTE_V_SECONDARY; + else + vflags = 0; +#else + attempt = 2; +#endif + goto map_again; + } else { + int hpte_id = kvmppc_mmu_hpte_cache_next(vcpu); + struct hpte_cache *pte = &vcpu->arch.hpte_cache[hpte_id]; + + dprintk_mmu("KVM: %c%c Map 0x%llx: [%lx] 0x%lx (0x%llx) -> %lx\n", + ((rflags & HPTE_R_PP) == 3) ? '-' : 'w', + (rflags & HPTE_R_N) ? '-' : 'x', + orig_pte->eaddr, hpteg, va, orig_pte->vpage, hpaddr); + + pte->slot = hpteg + (ret & 7); + pte->host_va = va; + pte->pte = *orig_pte; + pte->pfn = hpaddr >> PAGE_SHIFT; + } + + return 0; +} + +static struct kvmppc_sid_map *create_sid_map(struct kvm_vcpu *vcpu, u64 gvsid) +{ + struct kvmppc_sid_map *map; + struct kvmppc_vcpu_book3s *vcpu_book3s = to_book3s(vcpu); + u16 sid_map_mask; + static int backwards_map = 0; + + if (vcpu->arch.msr & MSR_PR) + gvsid |= VSID_PR; + + /* We might get collisions that trap in preceding order, so let's + map them differently */ + + sid_map_mask = kvmppc_sid_hash(vcpu, gvsid); + if (backwards_map) + sid_map_mask = SID_MAP_MASK - sid_map_mask; + + map = &to_book3s(vcpu)->sid_map[sid_map_mask]; + + /* Make sure we're taking the other map next time */ + backwards_map = !backwards_map; + + /* Uh-oh ... out of mappings. Let's flush! */ + if (vcpu_book3s->vsid_next == vcpu_book3s->vsid_max) { + vcpu_book3s->vsid_next = vcpu_book3s->vsid_first; + memset(vcpu_book3s->sid_map, 0, + sizeof(struct kvmppc_sid_map) * SID_MAP_NUM); + kvmppc_mmu_pte_flush(vcpu, 0, 0); + kvmppc_mmu_flush_segments(vcpu); + } + map->host_vsid = vcpu_book3s->vsid_next++; + + map->guest_vsid = gvsid; + map->valid = true; + + return map; +} + +static int kvmppc_mmu_next_segment(struct kvm_vcpu *vcpu, ulong esid) +{ + int i; + int max_slb_size = 64; + int found_inval = -1; + int r; + + if (!get_paca()->kvm_slb_max) + get_paca()->kvm_slb_max = 1; + + /* Are we overwriting? */ + for (i = 1; i < get_paca()->kvm_slb_max; i++) { + if (!(get_paca()->kvm_slb[i].esid & SLB_ESID_V)) + found_inval = i; + else if ((get_paca()->kvm_slb[i].esid & ESID_MASK) == esid) + return i; + } + + /* Found a spare entry that was invalidated before */ + if (found_inval > 0) + return found_inval; + + /* No spare invalid entry, so create one */ + + if (mmu_slb_size < 64) + max_slb_size = mmu_slb_size; + + /* Overflowing -> purge */ + if ((get_paca()->kvm_slb_max) == max_slb_size) + kvmppc_mmu_flush_segments(vcpu); + + r = get_paca()->kvm_slb_max; + get_paca()->kvm_slb_max++; + + return r; +} + +int kvmppc_mmu_map_segment(struct kvm_vcpu *vcpu, ulong eaddr) +{ + u64 esid = eaddr >> SID_SHIFT; + u64 slb_esid = (eaddr & ESID_MASK) | SLB_ESID_V; + u64 slb_vsid = SLB_VSID_USER; + u64 gvsid; + int slb_index; + struct kvmppc_sid_map *map; + + slb_index = kvmppc_mmu_next_segment(vcpu, eaddr & ESID_MASK); + + if (vcpu->arch.mmu.esid_to_vsid(vcpu, esid, &gvsid)) { + /* Invalidate an entry */ + get_paca()->kvm_slb[slb_index].esid = 0; + return -ENOENT; + } + + map = find_sid_vsid(vcpu, gvsid); + if (!map) + map = create_sid_map(vcpu, gvsid); + + map->guest_esid = esid; + + slb_vsid |= (map->host_vsid << 12); + slb_vsid &= ~SLB_VSID_KP; + slb_esid |= slb_index; + + get_paca()->kvm_slb[slb_index].esid = slb_esid; + get_paca()->kvm_slb[slb_index].vsid = slb_vsid; + + dprintk_slb("slbmte %#llx, %#llx\n", slb_vsid, slb_esid); + + return 0; +} + +void kvmppc_mmu_flush_segments(struct kvm_vcpu *vcpu) +{ + get_paca()->kvm_slb_max = 1; + get_paca()->kvm_slb[0].esid = 0; +} + +void kvmppc_mmu_destroy(struct kvm_vcpu *vcpu) +{ + kvmppc_mmu_pte_flush(vcpu, 0, 0); +} diff --git a/arch/powerpc/kvm/book3s_64_rmhandlers.S b/arch/powerpc/kvm/book3s_64_rmhandlers.S new file mode 100644 index 000000000000..fb7dd2e9ac88 --- /dev/null +++ b/arch/powerpc/kvm/book3s_64_rmhandlers.S @@ -0,0 +1,131 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#include <asm/ppc_asm.h> +#include <asm/kvm_asm.h> +#include <asm/reg.h> +#include <asm/page.h> +#include <asm/asm-offsets.h> +#include <asm/exception-64s.h> + +/***************************************************************************** + * * + * Real Mode handlers that need to be in low physical memory * + * * + ****************************************************************************/ + + +.macro INTERRUPT_TRAMPOLINE intno + +.global kvmppc_trampoline_\intno +kvmppc_trampoline_\intno: + + mtspr SPRN_SPRG_SCRATCH0, r13 /* Save r13 */ + + /* + * First thing to do is to find out if we're coming + * from a KVM guest or a Linux process. + * + * To distinguish, we check a magic byte in the PACA + */ + mfspr r13, SPRN_SPRG_PACA /* r13 = PACA */ + std r12, (PACA_EXMC + EX_R12)(r13) + mfcr r12 + stw r12, (PACA_EXMC + EX_CCR)(r13) + lbz r12, PACA_KVM_IN_GUEST(r13) + cmpwi r12, 0 + bne ..kvmppc_handler_hasmagic_\intno + /* No KVM guest? Then jump back to the Linux handler! */ + lwz r12, (PACA_EXMC + EX_CCR)(r13) + mtcr r12 + ld r12, (PACA_EXMC + EX_R12)(r13) + mfspr r13, SPRN_SPRG_SCRATCH0 /* r13 = original r13 */ + b kvmppc_resume_\intno /* Get back original handler */ + + /* Now we know we're handling a KVM guest */ +..kvmppc_handler_hasmagic_\intno: + /* Unset guest state */ + li r12, 0 + stb r12, PACA_KVM_IN_GUEST(r13) + + std r1, (PACA_EXMC+EX_R9)(r13) + std r10, (PACA_EXMC+EX_R10)(r13) + std r11, (PACA_EXMC+EX_R11)(r13) + std r2, (PACA_EXMC+EX_R13)(r13) + + mfsrr0 r10 + mfsrr1 r11 + + /* Restore R1/R2 so we can handle faults */ + ld r1, PACAR1(r13) + ld r2, (PACA_EXMC+EX_SRR0)(r13) + + /* Let's store which interrupt we're handling */ + li r12, \intno + + /* Jump into the SLB exit code that goes to the highmem handler */ + b kvmppc_handler_trampoline_exit + +.endm + +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_SYSTEM_RESET +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_MACHINE_CHECK +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DATA_STORAGE +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DATA_SEGMENT +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_INST_STORAGE +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_INST_SEGMENT +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_EXTERNAL +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_ALIGNMENT +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_PROGRAM +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_FP_UNAVAIL +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_DECREMENTER +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_SYSCALL +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_TRACE +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_PERFMON +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_ALTIVEC +INTERRUPT_TRAMPOLINE BOOK3S_INTERRUPT_VSX + +/* + * This trampoline brings us back to a real mode handler + * + * Input Registers: + * + * R6 = SRR0 + * R7 = SRR1 + * LR = real-mode IP + * + */ +.global kvmppc_handler_lowmem_trampoline +kvmppc_handler_lowmem_trampoline: + + mtsrr0 r6 + mtsrr1 r7 + blr +kvmppc_handler_lowmem_trampoline_end: + +.global kvmppc_trampoline_lowmem +kvmppc_trampoline_lowmem: + .long kvmppc_handler_lowmem_trampoline - _stext + +.global kvmppc_trampoline_enter +kvmppc_trampoline_enter: + .long kvmppc_handler_trampoline_enter - _stext + +#include "book3s_64_slb.S" + diff --git a/arch/powerpc/kvm/book3s_64_slb.S b/arch/powerpc/kvm/book3s_64_slb.S new file mode 100644 index 000000000000..ecd237a03fd0 --- /dev/null +++ b/arch/powerpc/kvm/book3s_64_slb.S @@ -0,0 +1,262 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Copyright SUSE Linux Products GmbH 2009 + * + * Authors: Alexander Graf <agraf@suse.de> + */ + +#define SHADOW_SLB_ESID(num) (SLBSHADOW_SAVEAREA + (num * 0x10)) +#define SHADOW_SLB_VSID(num) (SLBSHADOW_SAVEAREA + (num * 0x10) + 0x8) +#define UNBOLT_SLB_ENTRY(num) \ + ld r9, SHADOW_SLB_ESID(num)(r12); \ + /* Invalid? Skip. */; \ + rldicl. r0, r9, 37, 63; \ + beq slb_entry_skip_ ## num; \ + xoris r9, r9, SLB_ESID_V@h; \ + std r9, SHADOW_SLB_ESID(num)(r12); \ + slb_entry_skip_ ## num: + +#define REBOLT_SLB_ENTRY(num) \ + ld r10, SHADOW_SLB_ESID(num)(r11); \ + cmpdi r10, 0; \ + beq slb_exit_skip_1; \ + oris r10, r10, SLB_ESID_V@h; \ + ld r9, SHADOW_SLB_VSID(num)(r11); \ + slbmte r9, r10; \ + std r10, SHADOW_SLB_ESID(num)(r11); \ +slb_exit_skip_ ## num: + +/****************************************************************************** + * * + * Entry code * + * * + *****************************************************************************/ + +.global kvmppc_handler_trampoline_enter +kvmppc_handler_trampoline_enter: + + /* Required state: + * + * MSR = ~IR|DR + * R13 = PACA + * R9 = guest IP + * R10 = guest MSR + * R11 = free + * R12 = free + * PACA[PACA_EXMC + EX_R9] = guest R9 + * PACA[PACA_EXMC + EX_R10] = guest R10 + * PACA[PACA_EXMC + EX_R11] = guest R11 + * PACA[PACA_EXMC + EX_R12] = guest R12 + * PACA[PACA_EXMC + EX_R13] = guest R13 + * PACA[PACA_EXMC + EX_CCR] = guest CR + * PACA[PACA_EXMC + EX_R3] = guest XER + */ + + mtsrr0 r9 + mtsrr1 r10 + + mtspr SPRN_SPRG_SCRATCH0, r0 + + /* Remove LPAR shadow entries */ + +#if SLB_NUM_BOLTED == 3 + + ld r12, PACA_SLBSHADOWPTR(r13) + + /* Save off the first entry so we can slbie it later */ + ld r10, SHADOW_SLB_ESID(0)(r12) + ld r11, SHADOW_SLB_VSID(0)(r12) + + /* Remove bolted entries */ + UNBOLT_SLB_ENTRY(0) + UNBOLT_SLB_ENTRY(1) + UNBOLT_SLB_ENTRY(2) + +#else +#error unknown number of bolted entries +#endif + + /* Flush SLB */ + + slbia + + /* r0 = esid & ESID_MASK */ + rldicr r10, r10, 0, 35 + /* r0 |= CLASS_BIT(VSID) */ + rldic r12, r11, 56 - 36, 36 + or r10, r10, r12 + slbie r10 + + isync + + /* Fill SLB with our shadow */ + + lbz r12, PACA_KVM_SLB_MAX(r13) + mulli r12, r12, 16 + addi r12, r12, PACA_KVM_SLB + add r12, r12, r13 + + /* for (r11 = kvm_slb; r11 < kvm_slb + kvm_slb_size; r11+=slb_entry) */ + li r11, PACA_KVM_SLB + add r11, r11, r13 + +slb_loop_enter: + + ld r10, 0(r11) + + rldicl. r0, r10, 37, 63 + beq slb_loop_enter_skip + + ld r9, 8(r11) + slbmte r9, r10 + +slb_loop_enter_skip: + addi r11, r11, 16 + cmpd cr0, r11, r12 + blt slb_loop_enter + +slb_do_enter: + + /* Enter guest */ + + mfspr r0, SPRN_SPRG_SCRATCH0 + + ld r9, (PACA_EXMC+EX_R9)(r13) + ld r10, (PACA_EXMC+EX_R10)(r13) + ld r12, (PACA_EXMC+EX_R12)(r13) + + lwz r11, (PACA_EXMC+EX_CCR)(r13) + mtcr r11 + + ld r11, (PACA_EXMC+EX_R3)(r13) + mtxer r11 + + ld r11, (PACA_EXMC+EX_R11)(r13) + ld r13, (PACA_EXMC+EX_R13)(r13) + + RFI +kvmppc_handler_trampoline_enter_end: + + + +/****************************************************************************** + * * + * Exit code * + * * + *****************************************************************************/ + +.global kvmppc_handler_trampoline_exit +kvmppc_handler_trampoline_exit: + + /* Register usage at this point: + * + * SPRG_SCRATCH0 = guest R13 + * R01 = host R1 + * R02 = host R2 + * R10 = guest PC + * R11 = guest MSR + * R12 = exit handler id + * R13 = PACA + * PACA.exmc.CCR = guest CR + * PACA.exmc.R9 = guest R1 + * PACA.exmc.R10 = guest R10 + * PACA.exmc.R11 = guest R11 + * PACA.exmc.R12 = guest R12 + * PACA.exmc.R13 = guest R2 + * + */ + + /* Save registers */ + + std r0, (PACA_EXMC+EX_SRR0)(r13) + std r9, (PACA_EXMC+EX_R3)(r13) + std r10, (PACA_EXMC+EX_LR)(r13) + std r11, (PACA_EXMC+EX_DAR)(r13) + + /* + * In order for us to easily get the last instruction, + * we got the #vmexit at, we exploit the fact that the + * virtual layout is still the same here, so we can just + * ld from the guest's PC address + */ + + /* We only load the last instruction when it's safe */ + cmpwi r12, BOOK3S_INTERRUPT_DATA_STORAGE + beq ld_last_inst + cmpwi r12, BOOK3S_INTERRUPT_PROGRAM + beq ld_last_inst + + b no_ld_last_inst + +ld_last_inst: + /* Save off the guest instruction we're at */ + /* 1) enable paging for data */ + mfmsr r9 + ori r11, r9, MSR_DR /* Enable paging for data */ + mtmsr r11 + /* 2) fetch the instruction */ + lwz r0, 0(r10) + /* 3) disable paging again */ + mtmsr r9 + +no_ld_last_inst: + + /* Restore bolted entries from the shadow and fix it along the way */ + + /* We don't store anything in entry 0, so we don't need to take care of it */ + slbia + isync + +#if SLB_NUM_BOLTED == 3 + + ld r11, PACA_SLBSHADOWPTR(r13) + + REBOLT_SLB_ENTRY(0) + REBOLT_SLB_ENTRY(1) + REBOLT_SLB_ENTRY(2) + +#else +#error unknown number of bolted entries +#endif + +slb_do_exit: + + /* Restore registers */ + + ld r11, (PACA_EXMC+EX_DAR)(r13) + ld r10, (PACA_EXMC+EX_LR)(r13) + ld r9, (PACA_EXMC+EX_R3)(r13) + + /* Save last inst */ + stw r0, (PACA_EXMC+EX_LR)(r13) + + /* Save DAR and DSISR before going to paged mode */ + mfdar r0 + std r0, (PACA_EXMC+EX_DAR)(r13) + mfdsisr r0 + stw r0, (PACA_EXMC+EX_DSISR)(r13) + + /* RFI into the highmem handler */ + mfmsr r0 + ori r0, r0, MSR_IR|MSR_DR|MSR_RI /* Enable paging */ + mtsrr1 r0 + ld r0, PACASAVEDMSR(r13) /* Highmem handler address */ + mtsrr0 r0 + + mfspr r0, SPRN_SPRG_SCRATCH0 + + RFI +kvmppc_handler_trampoline_exit_end: + diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c index e7bf4d029484..06f5a9ecc42c 100644 --- a/arch/powerpc/kvm/booke.c +++ b/arch/powerpc/kvm/booke.c @@ -520,6 +520,11 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu, return kvmppc_core_vcpu_translate(vcpu, tr); } +int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log) +{ + return -ENOTSUPP; +} + int __init kvmppc_booke_init(void) { unsigned long ivor[16]; diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index 7737146af3fb..4a9ac6640fad 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -18,7 +18,7 @@ */ #include <linux/jiffies.h> -#include <linux/timer.h> +#include <linux/hrtimer.h> #include <linux/types.h> #include <linux/string.h> #include <linux/kvm_host.h> @@ -32,6 +32,7 @@ #include "trace.h" #define OP_TRAP 3 +#define OP_TRAP_64 2 #define OP_31_XOP_LWZX 23 #define OP_31_XOP_LBZX 87 @@ -64,19 +65,45 @@ #define OP_STH 44 #define OP_STHU 45 +#ifdef CONFIG_PPC64 +static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu) +{ + return 1; +} +#else +static int kvmppc_dec_enabled(struct kvm_vcpu *vcpu) +{ + return vcpu->arch.tcr & TCR_DIE; +} +#endif + void kvmppc_emulate_dec(struct kvm_vcpu *vcpu) { - if (vcpu->arch.tcr & TCR_DIE) { + unsigned long dec_nsec; + + pr_debug("mtDEC: %x\n", vcpu->arch.dec); +#ifdef CONFIG_PPC64 + /* POWER4+ triggers a dec interrupt if the value is < 0 */ + if (vcpu->arch.dec & 0x80000000) { + hrtimer_try_to_cancel(&vcpu->arch.dec_timer); + kvmppc_core_queue_dec(vcpu); + return; + } +#endif + if (kvmppc_dec_enabled(vcpu)) { /* The decrementer ticks at the same rate as the timebase, so * that's how we convert the guest DEC value to the number of * host ticks. */ - unsigned long nr_jiffies; - nr_jiffies = vcpu->arch.dec / tb_ticks_per_jiffy; - mod_timer(&vcpu->arch.dec_timer, - get_jiffies_64() + nr_jiffies); + hrtimer_try_to_cancel(&vcpu->arch.dec_timer); + dec_nsec = vcpu->arch.dec; + dec_nsec *= 1000; + dec_nsec /= tb_ticks_per_usec; + hrtimer_start(&vcpu->arch.dec_timer, ktime_set(0, dec_nsec), + HRTIMER_MODE_REL); + vcpu->arch.dec_jiffies = get_tb(); } else { - del_timer(&vcpu->arch.dec_timer); + hrtimer_try_to_cancel(&vcpu->arch.dec_timer); } } @@ -111,9 +138,15 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) /* this default type might be overwritten by subcategories */ kvmppc_set_exit_type(vcpu, EMULATED_INST_EXITS); + pr_debug(KERN_INFO "Emulating opcode %d / %d\n", get_op(inst), get_xop(inst)); + switch (get_op(inst)) { case OP_TRAP: +#ifdef CONFIG_PPC64 + case OP_TRAP_64: +#else vcpu->arch.esr |= ESR_PTR; +#endif kvmppc_core_queue_program(vcpu); advance = 0; break; @@ -188,17 +221,19 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) case SPRN_SRR1: vcpu->arch.gpr[rt] = vcpu->arch.srr1; break; case SPRN_PVR: - vcpu->arch.gpr[rt] = mfspr(SPRN_PVR); break; + vcpu->arch.gpr[rt] = vcpu->arch.pvr; break; case SPRN_PIR: - vcpu->arch.gpr[rt] = mfspr(SPRN_PIR); break; + vcpu->arch.gpr[rt] = vcpu->vcpu_id; break; + case SPRN_MSSSR0: + vcpu->arch.gpr[rt] = 0; break; /* Note: mftb and TBRL/TBWL are user-accessible, so * the guest can always access the real TB anyways. * In fact, we probably will never see these traps. */ case SPRN_TBWL: - vcpu->arch.gpr[rt] = mftbl(); break; + vcpu->arch.gpr[rt] = get_tb() >> 32; break; case SPRN_TBWU: - vcpu->arch.gpr[rt] = mftbu(); break; + vcpu->arch.gpr[rt] = get_tb(); break; case SPRN_SPRG0: vcpu->arch.gpr[rt] = vcpu->arch.sprg0; break; @@ -211,6 +246,13 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) /* Note: SPRG4-7 are user-readable, so we don't get * a trap. */ + case SPRN_DEC: + { + u64 jd = get_tb() - vcpu->arch.dec_jiffies; + vcpu->arch.gpr[rt] = vcpu->arch.dec - jd; + pr_debug(KERN_INFO "mfDEC: %x - %llx = %lx\n", vcpu->arch.dec, jd, vcpu->arch.gpr[rt]); + break; + } default: emulated = kvmppc_core_emulate_mfspr(vcpu, sprn, rt); if (emulated == EMULATE_FAIL) { @@ -260,6 +302,8 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) case SPRN_TBWL: break; case SPRN_TBWU: break; + case SPRN_MSSSR0: break; + case SPRN_DEC: vcpu->arch.dec = vcpu->arch.gpr[rs]; kvmppc_emulate_dec(vcpu); diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 5902bbc2411e..f06cf93b178e 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -23,6 +23,7 @@ #include <linux/kvm_host.h> #include <linux/module.h> #include <linux/vmalloc.h> +#include <linux/hrtimer.h> #include <linux/fs.h> #include <asm/cputable.h> #include <asm/uaccess.h> @@ -144,6 +145,9 @@ int kvm_dev_ioctl_check_extension(long ext) int r; switch (ext) { + case KVM_CAP_PPC_SEGSTATE: + r = 1; + break; case KVM_CAP_COALESCED_MMIO: r = KVM_COALESCED_MMIO_PAGE_OFFSET; break; @@ -209,10 +213,25 @@ static void kvmppc_decrementer_func(unsigned long data) } } +/* + * low level hrtimer wake routine. Because this runs in hardirq context + * we schedule a tasklet to do the real work. + */ +enum hrtimer_restart kvmppc_decrementer_wakeup(struct hrtimer *timer) +{ + struct kvm_vcpu *vcpu; + + vcpu = container_of(timer, struct kvm_vcpu, arch.dec_timer); + tasklet_schedule(&vcpu->arch.tasklet); + + return HRTIMER_NORESTART; +} + int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) { - setup_timer(&vcpu->arch.dec_timer, kvmppc_decrementer_func, - (unsigned long)vcpu); + hrtimer_init(&vcpu->arch.dec_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS); + tasklet_init(&vcpu->arch.tasklet, kvmppc_decrementer_func, (ulong)vcpu); + vcpu->arch.dec_timer.function = kvmppc_decrementer_wakeup; return 0; } @@ -410,11 +429,6 @@ out: return r; } -int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_dirty_log *log) -{ - return -ENOTSUPP; -} - long kvm_arch_vm_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c index 2aa371e30079..70378551c0cc 100644 --- a/arch/powerpc/kvm/timing.c +++ b/arch/powerpc/kvm/timing.c @@ -23,6 +23,7 @@ #include <linux/seq_file.h> #include <linux/debugfs.h> #include <linux/uaccess.h> +#include <linux/module.h> #include <asm/time.h> #include <asm-generic/div64.h> diff --git a/arch/powerpc/kvm/trace.h b/arch/powerpc/kvm/trace.h index 67f219de0455..a8e840018052 100644 --- a/arch/powerpc/kvm/trace.h +++ b/arch/powerpc/kvm/trace.h @@ -12,8 +12,8 @@ * Tracepoint for guest mode entry. */ TRACE_EVENT(kvm_ppc_instr, - TP_PROTO(unsigned int inst, unsigned long pc, unsigned int emulate), - TP_ARGS(inst, pc, emulate), + TP_PROTO(unsigned int inst, unsigned long _pc, unsigned int emulate), + TP_ARGS(inst, _pc, emulate), TP_STRUCT__entry( __field( unsigned int, inst ) @@ -23,7 +23,7 @@ TRACE_EVENT(kvm_ppc_instr, TP_fast_assign( __entry->inst = inst; - __entry->pc = pc; + __entry->pc = _pc; __entry->emulate = emulate; ), diff --git a/arch/powerpc/lib/copy_32.S b/arch/powerpc/lib/copy_32.S index c657de59abca..74a7f4130b4c 100644 --- a/arch/powerpc/lib/copy_32.S +++ b/arch/powerpc/lib/copy_32.S @@ -98,20 +98,7 @@ _GLOBAL(cacheable_memzero) bdnz 4b 3: mtctr r9 li r7,4 -#if !defined(CONFIG_8xx) 10: dcbz r7,r6 -#else -10: stw r4, 4(r6) - stw r4, 8(r6) - stw r4, 12(r6) - stw r4, 16(r6) -#if CACHE_LINE_SIZE >= 32 - stw r4, 20(r6) - stw r4, 24(r6) - stw r4, 28(r6) - stw r4, 32(r6) -#endif /* CACHE_LINE_SIZE */ -#endif addi r6,r6,CACHELINE_BYTES bdnz 10b clrlwi r5,r8,32-LG_CACHELINE_BYTES @@ -200,9 +187,7 @@ _GLOBAL(cacheable_memcpy) mtctr r0 beq 63f 53: -#if !defined(CONFIG_8xx) dcbz r11,r6 -#endif COPY_16_BYTES #if L1_CACHE_BYTES >= 32 COPY_16_BYTES @@ -356,14 +341,6 @@ _GLOBAL(__copy_tofrom_user) li r11,4 beq 63f -#ifdef CONFIG_8xx - /* Don't use prefetch on 8xx */ - mtctr r0 - li r0,0 -53: COPY_16_BYTES_WITHEX(0) - bdnz 53b - -#else /* not CONFIG_8xx */ /* Here we decide how far ahead to prefetch the source */ li r3,4 cmpwi r0,1 @@ -416,7 +393,6 @@ _GLOBAL(__copy_tofrom_user) li r3,4 li r7,0 bne 114b -#endif /* CONFIG_8xx */ 63: srwi. r0,r5,2 mtctr r0 diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile index 6fb8fc8d2fea..ce68708bbad5 100644 --- a/arch/powerpc/mm/Makefile +++ b/arch/powerpc/mm/Makefile @@ -28,7 +28,10 @@ obj-$(CONFIG_44x) += 44x_mmu.o obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o obj-$(CONFIG_NEED_MULTIPLE_NODES) += numa.o obj-$(CONFIG_PPC_MM_SLICES) += slice.o -obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o +ifeq ($(CONFIG_HUGETLB_PAGE),y) +obj-y += hugetlbpage.o +obj-$(CONFIG_PPC_STD_MMU_64) += hugetlbpage-hash64.o +endif obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o obj-$(CONFIG_HIGHMEM) += highmem.o diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index e7dae82c1285..26fb6b990b0a 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -40,7 +40,7 @@ #include <asm/uaccess.h> #include <asm/tlbflush.h> #include <asm/siginfo.h> - +#include <mm/mmu_decl.h> #ifdef CONFIG_KPROBES static inline int notify_page_fault(struct pt_regs *regs) @@ -246,6 +246,12 @@ good_area: goto bad_area; #endif /* CONFIG_6xx */ #if defined(CONFIG_8xx) + /* 8xx sometimes need to load a invalid/non-present TLBs. + * These must be invalidated separately as linux mm don't. + */ + if (error_code & 0x40000000) /* no translation? */ + _tlbil_va(address, 0, 0, 0); + /* The MPC8xx seems to always set 0x80000000, which is * "undefined". Of those that can be set, this is the only * one which seems bad. diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index dc93e95b256e..fcfcb6e976c7 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -54,26 +54,35 @@ #include "mmu_decl.h" -extern void loadcam_entry(unsigned int index); unsigned int tlbcam_index; -static unsigned long cam[CONFIG_LOWMEM_CAM_NUM]; -#define NUM_TLBCAMS (16) +#define NUM_TLBCAMS (64) #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) #error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" #endif -struct tlbcam TLBCAM[NUM_TLBCAMS]; +struct tlbcam { + u32 MAS0; + u32 MAS1; + unsigned long MAS2; + u32 MAS3; + u32 MAS7; +} TLBCAM[NUM_TLBCAMS]; struct tlbcamrange { - unsigned long start; + unsigned long start; unsigned long limit; phys_addr_t phys; } tlbcam_addrs[NUM_TLBCAMS]; extern unsigned int tlbcam_index; +unsigned long tlbcam_sz(int idx) +{ + return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1; +} + /* * Return PA for this VA if it is mapped by a CAM, or 0 */ @@ -94,23 +103,36 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa) int b; for (b = 0; b < tlbcam_index; ++b) if (pa >= tlbcam_addrs[b].phys - && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start) + && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start) +tlbcam_addrs[b].phys) return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys); return 0; } +void loadcam_entry(int idx) +{ + mtspr(SPRN_MAS0, TLBCAM[idx].MAS0); + mtspr(SPRN_MAS1, TLBCAM[idx].MAS1); + mtspr(SPRN_MAS2, TLBCAM[idx].MAS2); + mtspr(SPRN_MAS3, TLBCAM[idx].MAS3); + + if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS) + mtspr(SPRN_MAS7, TLBCAM[idx].MAS7); + + asm volatile("isync;tlbwe;isync" : : : "memory"); +} + /* * Set up one of the I/D BAT (block address translation) register pairs. * The parameters are not checked; in particular size must be a power * of 4 between 4k and 256M. */ -void settlbcam(int index, unsigned long virt, phys_addr_t phys, - unsigned int size, int flags, unsigned int pid) +static void settlbcam(int index, unsigned long virt, phys_addr_t phys, + unsigned long size, unsigned long flags, unsigned int pid) { unsigned int tsize, lz; - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); + asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size)); tsize = 21 - lz; #ifdef CONFIG_SMP @@ -128,8 +150,10 @@ void settlbcam(int index, unsigned long virt, phys_addr_t phys, TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0; TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0; - TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR; + TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR; TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0); + if (cur_cpu_spec->cpu_features & MMU_FTR_BIG_PHYS) + TLBCAM[index].MAS7 = (u64)phys >> 32; #ifndef CONFIG_KGDB /* want user access for breakpoints */ if (flags & _PAGE_USER) { @@ -148,27 +172,44 @@ void settlbcam(int index, unsigned long virt, phys_addr_t phys, loadcam_entry(index); } -void invalidate_tlbcam_entry(int index) -{ - TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index); - TLBCAM[index].MAS1 = ~MAS1_VALID; - - loadcam_entry(index); -} - -unsigned long __init mmu_mapin_ram(void) +unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) { + int i; unsigned long virt = PAGE_OFFSET; phys_addr_t phys = memstart_addr; + unsigned long amount_mapped = 0; + unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; + + /* Convert (4^max) kB to (2^max) bytes */ + max_cam = max_cam * 2 + 10; - while (tlbcam_index < ARRAY_SIZE(cam) && cam[tlbcam_index]) { - settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], PAGE_KERNEL_X, 0); - virt += cam[tlbcam_index]; - phys += cam[tlbcam_index]; - tlbcam_index++; + /* Calculate CAM values */ + for (i = 0; ram && i < max_cam_idx; i++) { + unsigned int camsize = __ilog2(ram) & ~1U; + unsigned int align = __ffs(virt | phys) & ~1U; + unsigned long cam_sz; + + if (camsize > align) + camsize = align; + if (camsize > max_cam) + camsize = max_cam; + + cam_sz = 1UL << camsize; + settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0); + + ram -= cam_sz; + amount_mapped += cam_sz; + virt += cam_sz; + phys += cam_sz; } + tlbcam_index = i; + + return amount_mapped; +} - return virt - PAGE_OFFSET; +unsigned long __init mmu_mapin_ram(void) +{ + return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1; } /* @@ -179,46 +220,21 @@ void __init MMU_init_hw(void) flush_instruction_cache(); } -void __init -adjust_total_lowmem(void) +void __init adjust_total_lowmem(void) { - phys_addr_t ram; - unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff; - char buf[ARRAY_SIZE(cam) * 5 + 1], *p = buf; + unsigned long ram; int i; - unsigned long virt = PAGE_OFFSET & 0xffffffffUL; - unsigned long phys = memstart_addr & 0xffffffffUL; - - /* Convert (4^max) kB to (2^max) bytes */ - max_cam = max_cam * 2 + 10; /* adjust lowmem size to __max_low_memory */ ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); - /* Calculate CAM values */ - __max_low_memory = 0; - for (i = 0; ram && i < ARRAY_SIZE(cam); i++) { - unsigned int camsize = __ilog2(ram) & ~1U; - unsigned int align = __ffs(virt | phys) & ~1U; + __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM); - if (camsize > align) - camsize = align; - if (camsize > max_cam) - camsize = max_cam; - - cam[i] = 1UL << camsize; - ram -= cam[i]; - __max_low_memory += cam[i]; - virt += cam[i]; - phys += cam[i]; - - p += sprintf(p, "%lu/", cam[i] >> 20); - } - for (; i < ARRAY_SIZE(cam); i++) - p += sprintf(p, "0/"); - p[-1] = '\0'; - - pr_info("Memory CAM mapping: %s Mb, residual: %dMb\n", buf, + pr_info("Memory CAM mapping: "); + for (i = 0; i < tlbcam_index - 1; i++) + pr_cont("%lu/", tlbcam_sz(i) >> 20); + pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20, (unsigned int)((total_lowmem - __max_low_memory) >> 20)); + __initial_memory_limit_addr = memstart_addr + __max_low_memory; } diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c index bc122a120bf0..d7efdbf640c7 100644 --- a/arch/powerpc/mm/gup.c +++ b/arch/powerpc/mm/gup.c @@ -55,57 +55,6 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, return 1; } -#ifdef CONFIG_HUGETLB_PAGE -static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate, - unsigned long *addr, unsigned long end, - int write, struct page **pages, int *nr) -{ - unsigned long mask; - unsigned long pte_end; - struct page *head, *page; - pte_t pte; - int refs; - - pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate); - if (pte_end < end) - end = pte_end; - - pte = *ptep; - mask = _PAGE_PRESENT|_PAGE_USER; - if (write) - mask |= _PAGE_RW; - if ((pte_val(pte) & mask) != mask) - return 0; - /* hugepages are never "special" */ - VM_BUG_ON(!pfn_valid(pte_pfn(pte))); - - refs = 0; - head = pte_page(pte); - page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT); - do { - VM_BUG_ON(compound_head(page) != head); - pages[*nr] = page; - (*nr)++; - page++; - refs++; - } while (*addr += PAGE_SIZE, *addr != end); - - if (!page_cache_add_speculative(head, refs)) { - *nr -= refs; - return 0; - } - if (unlikely(pte_val(pte) != pte_val(*ptep))) { - /* Could be optimized better */ - while (*nr) { - put_page(page); - (*nr)--; - } - } - - return 1; -} -#endif /* CONFIG_HUGETLB_PAGE */ - static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, int write, struct page **pages, int *nr) { @@ -119,7 +68,11 @@ static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, next = pmd_addr_end(addr, end); if (pmd_none(pmd)) return 0; - if (!gup_pte_range(pmd, addr, next, write, pages, nr)) + if (is_hugepd(pmdp)) { + if (!gup_hugepd((hugepd_t *)pmdp, PMD_SHIFT, + addr, next, write, pages, nr)) + return 0; + } else if (!gup_pte_range(pmd, addr, next, write, pages, nr)) return 0; } while (pmdp++, addr = next, addr != end); @@ -139,7 +92,11 @@ static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, next = pud_addr_end(addr, end); if (pud_none(pud)) return 0; - if (!gup_pmd_range(pud, addr, next, write, pages, nr)) + if (is_hugepd(pudp)) { + if (!gup_hugepd((hugepd_t *)pudp, PUD_SHIFT, + addr, next, write, pages, nr)) + return 0; + } else if (!gup_pmd_range(pud, addr, next, write, pages, nr)) return 0; } while (pudp++, addr = next, addr != end); @@ -154,10 +111,6 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, unsigned long next; pgd_t *pgdp; int nr = 0; -#ifdef CONFIG_PPC64 - unsigned int shift; - int psize; -#endif pr_devel("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read"); @@ -172,25 +125,6 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, pr_devel(" aligned: %lx .. %lx\n", start, end); -#ifdef CONFIG_HUGETLB_PAGE - /* We bail out on slice boundary crossing when hugetlb is - * enabled in order to not have to deal with two different - * page table formats - */ - if (addr < SLICE_LOW_TOP) { - if (end > SLICE_LOW_TOP) - goto slow_irqon; - - if (unlikely(GET_LOW_SLICE_INDEX(addr) != - GET_LOW_SLICE_INDEX(end - 1))) - goto slow_irqon; - } else { - if (unlikely(GET_HIGH_SLICE_INDEX(addr) != - GET_HIGH_SLICE_INDEX(end - 1))) - goto slow_irqon; - } -#endif /* CONFIG_HUGETLB_PAGE */ - /* * XXX: batch / limit 'nr', to avoid large irq off latency * needs some instrumenting to determine the common sizes used by @@ -210,54 +144,23 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write, */ local_irq_disable(); -#ifdef CONFIG_PPC64 - /* Those bits are related to hugetlbfs implementation and only exist - * on 64-bit for now - */ - psize = get_slice_psize(mm, addr); - shift = mmu_psize_defs[psize].shift; -#endif /* CONFIG_PPC64 */ - -#ifdef CONFIG_HUGETLB_PAGE - if (unlikely(mmu_huge_psizes[psize])) { - pte_t *ptep; - unsigned long a = addr; - unsigned long sz = ((1UL) << shift); - struct hstate *hstate = size_to_hstate(sz); - - BUG_ON(!hstate); - /* - * XXX: could be optimized to avoid hstate - * lookup entirely (just use shift) - */ - - do { - VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift); - ptep = huge_pte_offset(mm, a); - pr_devel(" %016lx: huge ptep %p\n", a, ptep); - if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages, - &nr)) - goto slow; - } while (a != end); - } else -#endif /* CONFIG_HUGETLB_PAGE */ - { - pgdp = pgd_offset(mm, addr); - do { - pgd_t pgd = *pgdp; - -#ifdef CONFIG_PPC64 - VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift); -#endif - pr_devel(" %016lx: normal pgd %p\n", addr, - (void *)pgd_val(pgd)); - next = pgd_addr_end(addr, end); - if (pgd_none(pgd)) - goto slow; - if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + pr_devel(" %016lx: normal pgd %p\n", addr, + (void *)pgd_val(pgd)); + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + goto slow; + if (is_hugepd(pgdp)) { + if (!gup_hugepd((hugepd_t *)pgdp, PGDIR_SHIFT, + addr, next, write, pages, &nr)) goto slow; - } while (pgdp++, addr = next, addr != end); - } + } else if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + goto slow; + } while (pgdp++, addr = next, addr != end); + local_irq_enable(); VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 1ade7eb6ae00..50f867d657df 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -92,6 +92,7 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT]; struct hash_pte *htab_address; unsigned long htab_size_bytes; unsigned long htab_hash_mask; +EXPORT_SYMBOL_GPL(htab_hash_mask); int mmu_linear_psize = MMU_PAGE_4K; int mmu_virtual_psize = MMU_PAGE_4K; int mmu_vmalloc_psize = MMU_PAGE_4K; @@ -102,6 +103,7 @@ int mmu_io_psize = MMU_PAGE_4K; int mmu_kernel_ssize = MMU_SEGSIZE_256M; int mmu_highuser_ssize = MMU_SEGSIZE_256M; u16 mmu_slb_size = 64; +EXPORT_SYMBOL_GPL(mmu_slb_size); #ifdef CONFIG_HUGETLB_PAGE unsigned int HPAGE_SHIFT; #endif @@ -481,16 +483,6 @@ static void __init htab_init_page_sizes(void) #ifdef CONFIG_HUGETLB_PAGE /* Reserve 16G huge page memory sections for huge pages */ of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL); - -/* Set default large page size. Currently, we pick 16M or 1M depending - * on what is available - */ - if (mmu_psize_defs[MMU_PAGE_16M].shift) - HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift; - /* With 4k/4level pagetables, we can't (for now) cope with a - * huge page size < PMD_SIZE */ - else if (mmu_psize_defs[MMU_PAGE_1M].shift) - HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift; #endif /* CONFIG_HUGETLB_PAGE */ } @@ -785,7 +777,7 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap) /* page is dirty */ if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) { if (trap == 0x400) { - __flush_dcache_icache(page_address(page)); + flush_dcache_icache_page(page); set_bit(PG_arch_1, &page->flags); } else pp |= HPTE_R_N; @@ -843,9 +835,9 @@ void demote_segment_4k(struct mm_struct *mm, unsigned long addr) * Result is 0: full permissions, _PAGE_RW: read-only, * _PAGE_USER or _PAGE_USER|_PAGE_RW: no access. */ -static int subpage_protection(pgd_t *pgdir, unsigned long ea) +static int subpage_protection(struct mm_struct *mm, unsigned long ea) { - struct subpage_prot_table *spt = pgd_subpage_prot(pgdir); + struct subpage_prot_table *spt = &mm->context.spt; u32 spp = 0; u32 **sbpm, *sbpp; @@ -873,7 +865,7 @@ static int subpage_protection(pgd_t *pgdir, unsigned long ea) } #else /* CONFIG_PPC_SUBPAGE_PROT */ -static inline int subpage_protection(pgd_t *pgdir, unsigned long ea) +static inline int subpage_protection(struct mm_struct *mm, unsigned long ea) { return 0; } @@ -891,6 +883,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) unsigned long vsid; struct mm_struct *mm; pte_t *ptep; + unsigned hugeshift; const struct cpumask *tmp; int rc, user_region = 0, local = 0; int psize, ssize; @@ -943,30 +936,31 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) if (user_region && cpumask_equal(mm_cpumask(mm), tmp)) local = 1; -#ifdef CONFIG_HUGETLB_PAGE - /* Handle hugepage regions */ - if (HPAGE_SHIFT && mmu_huge_psizes[psize]) { - DBG_LOW(" -> huge page !\n"); - return hash_huge_page(mm, access, ea, vsid, local, trap); - } -#endif /* CONFIG_HUGETLB_PAGE */ - #ifndef CONFIG_PPC_64K_PAGES - /* If we use 4K pages and our psize is not 4K, then we are hitting - * a special driver mapping, we need to align the address before - * we fetch the PTE + /* If we use 4K pages and our psize is not 4K, then we might + * be hitting a special driver mapping, and need to align the + * address before we fetch the PTE. + * + * It could also be a hugepage mapping, in which case this is + * not necessary, but it's not harmful, either. */ if (psize != MMU_PAGE_4K) ea &= ~((1ul << mmu_psize_defs[psize].shift) - 1); #endif /* CONFIG_PPC_64K_PAGES */ /* Get PTE and page size from page tables */ - ptep = find_linux_pte(pgdir, ea); + ptep = find_linux_pte_or_hugepte(pgdir, ea, &hugeshift); if (ptep == NULL || !pte_present(*ptep)) { DBG_LOW(" no PTE !\n"); return 1; } +#ifdef CONFIG_HUGETLB_PAGE + if (hugeshift) + return __hash_page_huge(ea, access, vsid, ptep, trap, local, + ssize, hugeshift, psize); +#endif /* CONFIG_HUGETLB_PAGE */ + #ifndef CONFIG_PPC_64K_PAGES DBG_LOW(" i-pte: %016lx\n", pte_val(*ptep)); #else diff --git a/arch/powerpc/mm/hugetlbpage-hash64.c b/arch/powerpc/mm/hugetlbpage-hash64.c new file mode 100644 index 000000000000..199539882f92 --- /dev/null +++ b/arch/powerpc/mm/hugetlbpage-hash64.c @@ -0,0 +1,139 @@ +/* + * PPC64 Huge TLB Page Support for hash based MMUs (POWER4 and later) + * + * Copyright (C) 2003 David Gibson, IBM Corporation. + * + * Based on the IA-32 version: + * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com> + */ + +#include <linux/mm.h> +#include <linux/hugetlb.h> +#include <asm/pgtable.h> +#include <asm/pgalloc.h> +#include <asm/cacheflush.h> +#include <asm/machdep.h> + +int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid, + pte_t *ptep, unsigned long trap, int local, int ssize, + unsigned int shift, unsigned int mmu_psize) +{ + unsigned long old_pte, new_pte; + unsigned long va, rflags, pa, sz; + long slot; + int err = 1; + + BUG_ON(shift != mmu_psize_defs[mmu_psize].shift); + + /* Search the Linux page table for a match with va */ + va = hpt_va(ea, vsid, ssize); + + /* + * Check the user's access rights to the page. If access should be + * prevented then send the problem up to do_page_fault. + */ + if (unlikely(access & ~pte_val(*ptep))) + goto out; + /* + * At this point, we have a pte (old_pte) which can be used to build + * or update an HPTE. There are 2 cases: + * + * 1. There is a valid (present) pte with no associated HPTE (this is + * the most common case) + * 2. There is a valid (present) pte with an associated HPTE. The + * current values of the pp bits in the HPTE prevent access + * because we are doing software DIRTY bit management and the + * page is currently not DIRTY. + */ + + + do { + old_pte = pte_val(*ptep); + if (old_pte & _PAGE_BUSY) + goto out; + new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED; + } while(old_pte != __cmpxchg_u64((unsigned long *)ptep, + old_pte, new_pte)); + + rflags = 0x2 | (!(new_pte & _PAGE_RW)); + /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */ + rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N); + sz = ((1UL) << shift); + if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) + /* No CPU has hugepages but lacks no execute, so we + * don't need to worry about that case */ + rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap); + + /* Check if pte already has an hpte (case 2) */ + if (unlikely(old_pte & _PAGE_HASHPTE)) { + /* There MIGHT be an HPTE for this pte */ + unsigned long hash, slot; + + hash = hpt_hash(va, shift, ssize); + if (old_pte & _PAGE_F_SECOND) + hash = ~hash; + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; + slot += (old_pte & _PAGE_F_GIX) >> 12; + + if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize, + ssize, local) == -1) + old_pte &= ~_PAGE_HPTEFLAGS; + } + + if (likely(!(old_pte & _PAGE_HASHPTE))) { + unsigned long hash = hpt_hash(va, shift, ssize); + unsigned long hpte_group; + + pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT; + +repeat: + hpte_group = ((hash & htab_hash_mask) * + HPTES_PER_GROUP) & ~0x7UL; + + /* clear HPTE slot informations in new PTE */ +#ifdef CONFIG_PPC_64K_PAGES + new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0; +#else + new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE; +#endif + /* Add in WIMG bits */ + rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | + _PAGE_COHERENT | _PAGE_GUARDED)); + + /* Insert into the hash table, primary slot */ + slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0, + mmu_psize, ssize); + + /* Primary is full, try the secondary */ + if (unlikely(slot == -1)) { + hpte_group = ((~hash & htab_hash_mask) * + HPTES_PER_GROUP) & ~0x7UL; + slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, + HPTE_V_SECONDARY, + mmu_psize, ssize); + if (slot == -1) { + if (mftb() & 0x1) + hpte_group = ((hash & htab_hash_mask) * + HPTES_PER_GROUP)&~0x7UL; + + ppc_md.hpte_remove(hpte_group); + goto repeat; + } + } + + if (unlikely(slot == -2)) + panic("hash_huge_page: pte_insert failed\n"); + + new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX); + } + + /* + * No need to use ldarx/stdcx here + */ + *ptep = __pte(new_pte & ~_PAGE_BUSY); + + err = 0; + + out: + return err; +} diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 90df6ffe3a43..123f7070238a 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -7,29 +7,17 @@ * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com> */ -#include <linux/init.h> -#include <linux/fs.h> #include <linux/mm.h> +#include <linux/io.h> #include <linux/hugetlb.h> -#include <linux/pagemap.h> -#include <linux/slab.h> -#include <linux/err.h> -#include <linux/sysctl.h> -#include <asm/mman.h> +#include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/tlb.h> -#include <asm/tlbflush.h> -#include <asm/mmu_context.h> -#include <asm/machdep.h> -#include <asm/cputable.h> -#include <asm/spu.h> #define PAGE_SHIFT_64K 16 #define PAGE_SHIFT_16M 24 #define PAGE_SHIFT_16G 34 -#define NUM_LOW_AREAS (0x100000000UL >> SID_SHIFT) -#define NUM_HIGH_AREAS (PGTABLE_RANGE >> HTLB_AREA_SHIFT) #define MAX_NUMBER_GPAGES 1024 /* Tracks the 16G pages after the device tree is scanned and before the @@ -37,53 +25,17 @@ static unsigned long gpage_freearray[MAX_NUMBER_GPAGES]; static unsigned nr_gpages; -/* Array of valid huge page sizes - non-zero value(hugepte_shift) is - * stored for the huge page sizes that are valid. - */ -unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */ - -#define hugepte_shift mmu_huge_psizes -#define PTRS_PER_HUGEPTE(psize) (1 << hugepte_shift[psize]) -#define HUGEPTE_TABLE_SIZE(psize) (sizeof(pte_t) << hugepte_shift[psize]) - -#define HUGEPD_SHIFT(psize) (mmu_psize_to_shift(psize) \ - + hugepte_shift[psize]) -#define HUGEPD_SIZE(psize) (1UL << HUGEPD_SHIFT(psize)) -#define HUGEPD_MASK(psize) (~(HUGEPD_SIZE(psize)-1)) - -/* Subtract one from array size because we don't need a cache for 4K since - * is not a huge page size */ -#define HUGE_PGTABLE_INDEX(psize) (HUGEPTE_CACHE_NUM + psize - 1) -#define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize]) - -static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = { - [MMU_PAGE_64K] = "hugepte_cache_64K", - [MMU_PAGE_1M] = "hugepte_cache_1M", - [MMU_PAGE_16M] = "hugepte_cache_16M", - [MMU_PAGE_16G] = "hugepte_cache_16G", -}; - /* Flag to mark huge PD pointers. This means pmd_bad() and pud_bad() * will choke on pointers to hugepte tables, which is handy for * catching screwups early. */ -#define HUGEPD_OK 0x1 - -typedef struct { unsigned long pd; } hugepd_t; - -#define hugepd_none(hpd) ((hpd).pd == 0) static inline int shift_to_mmu_psize(unsigned int shift) { - switch (shift) { -#ifndef CONFIG_PPC_64K_PAGES - case PAGE_SHIFT_64K: - return MMU_PAGE_64K; -#endif - case PAGE_SHIFT_16M: - return MMU_PAGE_16M; - case PAGE_SHIFT_16G: - return MMU_PAGE_16G; - } + int psize; + + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) + if (mmu_psize_defs[psize].shift == shift) + return psize; return -1; } @@ -94,71 +46,126 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize) BUG(); } +#define hugepd_none(hpd) ((hpd).pd == 0) + static inline pte_t *hugepd_page(hugepd_t hpd) { - BUG_ON(!(hpd.pd & HUGEPD_OK)); - return (pte_t *)(hpd.pd & ~HUGEPD_OK); + BUG_ON(!hugepd_ok(hpd)); + return (pte_t *)((hpd.pd & ~HUGEPD_SHIFT_MASK) | 0xc000000000000000); +} + +static inline unsigned int hugepd_shift(hugepd_t hpd) +{ + return hpd.pd & HUGEPD_SHIFT_MASK; } -static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, - struct hstate *hstate) +static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, unsigned pdshift) { - unsigned int shift = huge_page_shift(hstate); - int psize = shift_to_mmu_psize(shift); - unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1)); + unsigned long idx = (addr & ((1UL << pdshift) - 1)) >> hugepd_shift(*hpdp); pte_t *dir = hugepd_page(*hpdp); return dir + idx; } +pte_t *find_linux_pte_or_hugepte(pgd_t *pgdir, unsigned long ea, unsigned *shift) +{ + pgd_t *pg; + pud_t *pu; + pmd_t *pm; + hugepd_t *hpdp = NULL; + unsigned pdshift = PGDIR_SHIFT; + + if (shift) + *shift = 0; + + pg = pgdir + pgd_index(ea); + if (is_hugepd(pg)) { + hpdp = (hugepd_t *)pg; + } else if (!pgd_none(*pg)) { + pdshift = PUD_SHIFT; + pu = pud_offset(pg, ea); + if (is_hugepd(pu)) + hpdp = (hugepd_t *)pu; + else if (!pud_none(*pu)) { + pdshift = PMD_SHIFT; + pm = pmd_offset(pu, ea); + if (is_hugepd(pm)) + hpdp = (hugepd_t *)pm; + else if (!pmd_none(*pm)) { + return pte_offset_map(pm, ea); + } + } + } + + if (!hpdp) + return NULL; + + if (shift) + *shift = hugepd_shift(*hpdp); + return hugepte_offset(hpdp, ea, pdshift); +} + +pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) +{ + return find_linux_pte_or_hugepte(mm->pgd, addr, NULL); +} + static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, - unsigned long address, unsigned int psize) + unsigned long address, unsigned pdshift, unsigned pshift) { - pte_t *new = kmem_cache_zalloc(pgtable_cache[HUGE_PGTABLE_INDEX(psize)], - GFP_KERNEL|__GFP_REPEAT); + pte_t *new = kmem_cache_zalloc(PGT_CACHE(pdshift - pshift), + GFP_KERNEL|__GFP_REPEAT); + + BUG_ON(pshift > HUGEPD_SHIFT_MASK); + BUG_ON((unsigned long)new & HUGEPD_SHIFT_MASK); if (! new) return -ENOMEM; spin_lock(&mm->page_table_lock); if (!hugepd_none(*hpdp)) - kmem_cache_free(pgtable_cache[HUGE_PGTABLE_INDEX(psize)], new); + kmem_cache_free(PGT_CACHE(pdshift - pshift), new); else - hpdp->pd = (unsigned long)new | HUGEPD_OK; + hpdp->pd = ((unsigned long)new & ~0x8000000000000000) | pshift; spin_unlock(&mm->page_table_lock); return 0; } - -static pud_t *hpud_offset(pgd_t *pgd, unsigned long addr, struct hstate *hstate) -{ - if (huge_page_shift(hstate) < PUD_SHIFT) - return pud_offset(pgd, addr); - else - return (pud_t *) pgd; -} -static pud_t *hpud_alloc(struct mm_struct *mm, pgd_t *pgd, unsigned long addr, - struct hstate *hstate) +pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz) { - if (huge_page_shift(hstate) < PUD_SHIFT) - return pud_alloc(mm, pgd, addr); - else - return (pud_t *) pgd; -} -static pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate) -{ - if (huge_page_shift(hstate) < PMD_SHIFT) - return pmd_offset(pud, addr); - else - return (pmd_t *) pud; -} -static pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr, - struct hstate *hstate) -{ - if (huge_page_shift(hstate) < PMD_SHIFT) - return pmd_alloc(mm, pud, addr); - else - return (pmd_t *) pud; + pgd_t *pg; + pud_t *pu; + pmd_t *pm; + hugepd_t *hpdp = NULL; + unsigned pshift = __ffs(sz); + unsigned pdshift = PGDIR_SHIFT; + + addr &= ~(sz-1); + + pg = pgd_offset(mm, addr); + if (pshift >= PUD_SHIFT) { + hpdp = (hugepd_t *)pg; + } else { + pdshift = PUD_SHIFT; + pu = pud_alloc(mm, pg, addr); + if (pshift >= PMD_SHIFT) { + hpdp = (hugepd_t *)pu; + } else { + pdshift = PMD_SHIFT; + pm = pmd_alloc(mm, pu, addr); + hpdp = (hugepd_t *)pm; + } + } + + if (!hpdp) + return NULL; + + BUG_ON(!hugepd_none(*hpdp) && !hugepd_ok(*hpdp)); + + if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, pdshift, pshift)) + return NULL; + + return hugepte_offset(hpdp, addr, pdshift); } /* Build list of addresses of gigantic pages. This function is used in early @@ -192,94 +199,38 @@ int alloc_bootmem_huge_page(struct hstate *hstate) return 1; } - -/* Modelled after find_linux_pte() */ -pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr) -{ - pgd_t *pg; - pud_t *pu; - pmd_t *pm; - - unsigned int psize; - unsigned int shift; - unsigned long sz; - struct hstate *hstate; - psize = get_slice_psize(mm, addr); - shift = mmu_psize_to_shift(psize); - sz = ((1UL) << shift); - hstate = size_to_hstate(sz); - - addr &= hstate->mask; - - pg = pgd_offset(mm, addr); - if (!pgd_none(*pg)) { - pu = hpud_offset(pg, addr, hstate); - if (!pud_none(*pu)) { - pm = hpmd_offset(pu, addr, hstate); - if (!pmd_none(*pm)) - return hugepte_offset((hugepd_t *)pm, addr, - hstate); - } - } - - return NULL; -} - -pte_t *huge_pte_alloc(struct mm_struct *mm, - unsigned long addr, unsigned long sz) -{ - pgd_t *pg; - pud_t *pu; - pmd_t *pm; - hugepd_t *hpdp = NULL; - struct hstate *hstate; - unsigned int psize; - hstate = size_to_hstate(sz); - - psize = get_slice_psize(mm, addr); - BUG_ON(!mmu_huge_psizes[psize]); - - addr &= hstate->mask; - - pg = pgd_offset(mm, addr); - pu = hpud_alloc(mm, pg, addr, hstate); - - if (pu) { - pm = hpmd_alloc(mm, pu, addr, hstate); - if (pm) - hpdp = (hugepd_t *)pm; - } - - if (! hpdp) - return NULL; - - if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize)) - return NULL; - - return hugepte_offset(hpdp, addr, hstate); -} - int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) { return 0; } -static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp, - unsigned int psize) +static void free_hugepd_range(struct mmu_gather *tlb, hugepd_t *hpdp, int pdshift, + unsigned long start, unsigned long end, + unsigned long floor, unsigned long ceiling) { pte_t *hugepte = hugepd_page(*hpdp); + unsigned shift = hugepd_shift(*hpdp); + unsigned long pdmask = ~((1UL << pdshift) - 1); + + start &= pdmask; + if (start < floor) + return; + if (ceiling) { + ceiling &= pdmask; + if (! ceiling) + return; + } + if (end - 1 > ceiling - 1) + return; hpdp->pd = 0; tlb->need_flush = 1; - pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, - HUGEPTE_CACHE_NUM+psize-1, - PGF_CACHENUM_MASK)); + pgtable_free_tlb(tlb, hugepte, pdshift - shift); } static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, unsigned long addr, unsigned long end, - unsigned long floor, unsigned long ceiling, - unsigned int psize) + unsigned long floor, unsigned long ceiling) { pmd_t *pmd; unsigned long next; @@ -291,7 +242,8 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud, next = pmd_addr_end(addr, end); if (pmd_none(*pmd)) continue; - free_hugepte_range(tlb, (hugepd_t *)pmd, psize); + free_hugepd_range(tlb, (hugepd_t *)pmd, PMD_SHIFT, + addr, next, floor, ceiling); } while (pmd++, addr = next, addr != end); start &= PUD_MASK; @@ -317,23 +269,19 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd, pud_t *pud; unsigned long next; unsigned long start; - unsigned int shift; - unsigned int psize = get_slice_psize(tlb->mm, addr); - shift = mmu_psize_to_shift(psize); start = addr; pud = pud_offset(pgd, addr); do { next = pud_addr_end(addr, end); - if (shift < PMD_SHIFT) { + if (!is_hugepd(pud)) { if (pud_none_or_clear_bad(pud)) continue; hugetlb_free_pmd_range(tlb, pud, addr, next, floor, - ceiling, psize); + ceiling); } else { - if (pud_none(*pud)) - continue; - free_hugepte_range(tlb, (hugepd_t *)pud, psize); + free_hugepd_range(tlb, (hugepd_t *)pud, PUD_SHIFT, + addr, next, floor, ceiling); } } while (pud++, addr = next, addr != end); @@ -364,121 +312,56 @@ void hugetlb_free_pgd_range(struct mmu_gather *tlb, { pgd_t *pgd; unsigned long next; - unsigned long start; /* - * Comments below take from the normal free_pgd_range(). They - * apply here too. The tests against HUGEPD_MASK below are - * essential, because we *don't* test for this at the bottom - * level. Without them we'll attempt to free a hugepte table - * when we unmap just part of it, even if there are other - * active mappings using it. - * - * The next few lines have given us lots of grief... - * - * Why are we testing HUGEPD* at this top level? Because - * often there will be no work to do at all, and we'd prefer - * not to go all the way down to the bottom just to discover - * that. - * - * Why all these "- 1"s? Because 0 represents both the bottom - * of the address space and the top of it (using -1 for the - * top wouldn't help much: the masks would do the wrong thing). - * The rule is that addr 0 and floor 0 refer to the bottom of - * the address space, but end 0 and ceiling 0 refer to the top - * Comparisons need to use "end - 1" and "ceiling - 1" (though - * that end 0 case should be mythical). + * Because there are a number of different possible pagetable + * layouts for hugepage ranges, we limit knowledge of how + * things should be laid out to the allocation path + * (huge_pte_alloc(), above). Everything else works out the + * structure as it goes from information in the hugepd + * pointers. That means that we can't here use the + * optimization used in the normal page free_pgd_range(), of + * checking whether we're actually covering a large enough + * range to have to do anything at the top level of the walk + * instead of at the bottom. * - * Wherever addr is brought up or ceiling brought down, we - * must be careful to reject "the opposite 0" before it - * confuses the subsequent tests. But what about where end is - * brought down by HUGEPD_SIZE below? no, end can't go down to - * 0 there. - * - * Whereas we round start (addr) and ceiling down, by different - * masks at different levels, in order to test whether a table - * now has no other vmas using it, so can be freed, we don't - * bother to round floor or end up - the tests don't need that. + * To make sense of this, you should probably go read the big + * block comment at the top of the normal free_pgd_range(), + * too. */ - unsigned int psize = get_slice_psize(tlb->mm, addr); - - addr &= HUGEPD_MASK(psize); - if (addr < floor) { - addr += HUGEPD_SIZE(psize); - if (!addr) - return; - } - if (ceiling) { - ceiling &= HUGEPD_MASK(psize); - if (!ceiling) - return; - } - if (end - 1 > ceiling - 1) - end -= HUGEPD_SIZE(psize); - if (addr > end - 1) - return; - start = addr; pgd = pgd_offset(tlb->mm, addr); do { - psize = get_slice_psize(tlb->mm, addr); - BUG_ON(!mmu_huge_psizes[psize]); next = pgd_addr_end(addr, end); - if (mmu_psize_to_shift(psize) < PUD_SHIFT) { + if (!is_hugepd(pgd)) { if (pgd_none_or_clear_bad(pgd)) continue; hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling); } else { - if (pgd_none(*pgd)) - continue; - free_hugepte_range(tlb, (hugepd_t *)pgd, psize); + free_hugepd_range(tlb, (hugepd_t *)pgd, PGDIR_SHIFT, + addr, next, floor, ceiling); } } while (pgd++, addr = next, addr != end); } -void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - if (pte_present(*ptep)) { - /* We open-code pte_clear because we need to pass the right - * argument to hpte_need_flush (huge / !huge). Might not be - * necessary anymore if we make hpte_need_flush() get the - * page size from the slices - */ - unsigned int psize = get_slice_psize(mm, addr); - unsigned int shift = mmu_psize_to_shift(psize); - unsigned long sz = ((1UL) << shift); - struct hstate *hstate = size_to_hstate(sz); - pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1); - } - *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); -} - -pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, - pte_t *ptep) -{ - unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1); - return __pte(old); -} - struct page * follow_huge_addr(struct mm_struct *mm, unsigned long address, int write) { pte_t *ptep; struct page *page; - unsigned int mmu_psize = get_slice_psize(mm, address); + unsigned shift; + unsigned long mask; + + ptep = find_linux_pte_or_hugepte(mm->pgd, address, &shift); /* Verify it is a huge page else bail. */ - if (!mmu_huge_psizes[mmu_psize]) + if (!ptep || !shift) return ERR_PTR(-EINVAL); - ptep = huge_pte_offset(mm, address); + mask = (1UL << shift) - 1; page = pte_page(*ptep); - if (page) { - unsigned int shift = mmu_psize_to_shift(mmu_psize); - unsigned long sz = ((1UL) << shift); - page += (address % sz) / PAGE_SIZE; - } + if (page) + page += (address & mask) / PAGE_SIZE; return page; } @@ -501,6 +384,82 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address, return NULL; } +static noinline int gup_hugepte(pte_t *ptep, unsigned long sz, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask; + unsigned long pte_end; + struct page *head, *page; + pte_t pte; + int refs; + + pte_end = (addr + sz) & ~(sz-1); + if (pte_end < end) + end = pte_end; + + pte = *ptep; + mask = _PAGE_PRESENT | _PAGE_USER; + if (write) + mask |= _PAGE_RW; + + if ((pte_val(pte) & mask) != mask) + return 0; + + /* hugepages are never "special" */ + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + + page = head + ((addr & (sz-1)) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (addr += PAGE_SIZE, addr != end); + + if (!page_cache_add_speculative(head, refs)) { + *nr -= refs; + return 0; + } + + if (unlikely(pte_val(pte) != pte_val(*ptep))) { + /* Could be optimized better */ + while (*nr) { + put_page(page); + (*nr)--; + } + } + + return 1; +} + +static unsigned long hugepte_addr_end(unsigned long addr, unsigned long end, + unsigned long sz) +{ + unsigned long __boundary = (addr + sz) & ~(sz-1); + return (__boundary - 1 < end - 1) ? __boundary : end; +} + +int gup_hugepd(hugepd_t *hugepd, unsigned pdshift, + unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + pte_t *ptep; + unsigned long sz = 1UL << hugepd_shift(*hugepd); + unsigned long next; + + ptep = hugepte_offset(hugepd, addr, pdshift); + do { + next = hugepte_addr_end(addr, end, sz); + if (!gup_hugepte(ptep, sz, addr, end, write, pages, nr)) + return 0; + } while (ptep++, addr = next, addr != end); + + return 1; +} unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, @@ -509,8 +468,6 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, struct hstate *hstate = hstate_file(file); int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate)); - if (!mmu_huge_psizes[mmu_psize]) - return -EINVAL; return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0); } @@ -521,229 +478,46 @@ unsigned long vma_mmu_pagesize(struct vm_area_struct *vma) return 1UL << mmu_psize_to_shift(psize); } -/* - * Called by asm hashtable.S for doing lazy icache flush - */ -static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags, - pte_t pte, int trap, unsigned long sz) +static int __init add_huge_page_size(unsigned long long size) { - struct page *page; - int i; - - if (!pfn_valid(pte_pfn(pte))) - return rflags; - - page = pte_page(pte); - - /* page is dirty */ - if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) { - if (trap == 0x400) { - for (i = 0; i < (sz / PAGE_SIZE); i++) - __flush_dcache_icache(page_address(page+i)); - set_bit(PG_arch_1, &page->flags); - } else { - rflags |= HPTE_R_N; - } - } - return rflags; -} + int shift = __ffs(size); + int mmu_psize; -int hash_huge_page(struct mm_struct *mm, unsigned long access, - unsigned long ea, unsigned long vsid, int local, - unsigned long trap) -{ - pte_t *ptep; - unsigned long old_pte, new_pte; - unsigned long va, rflags, pa, sz; - long slot; - int err = 1; - int ssize = user_segment_size(ea); - unsigned int mmu_psize; - int shift; - mmu_psize = get_slice_psize(mm, ea); - - if (!mmu_huge_psizes[mmu_psize]) - goto out; - ptep = huge_pte_offset(mm, ea); - - /* Search the Linux page table for a match with va */ - va = hpt_va(ea, vsid, ssize); + /* Check that it is a page size supported by the hardware and + * that it fits within pagetable and slice limits. */ + if (!is_power_of_2(size) + || (shift > SLICE_HIGH_SHIFT) || (shift <= PAGE_SHIFT)) + return -EINVAL; - /* - * If no pte found or not present, send the problem up to - * do_page_fault - */ - if (unlikely(!ptep || pte_none(*ptep))) - goto out; + if ((mmu_psize = shift_to_mmu_psize(shift)) < 0) + return -EINVAL; - /* - * Check the user's access rights to the page. If access should be - * prevented then send the problem up to do_page_fault. +#ifdef CONFIG_SPU_FS_64K_LS + /* Disable support for 64K huge pages when 64K SPU local store + * support is enabled as the current implementation conflicts. */ - if (unlikely(access & ~pte_val(*ptep))) - goto out; - /* - * At this point, we have a pte (old_pte) which can be used to build - * or update an HPTE. There are 2 cases: - * - * 1. There is a valid (present) pte with no associated HPTE (this is - * the most common case) - * 2. There is a valid (present) pte with an associated HPTE. The - * current values of the pp bits in the HPTE prevent access - * because we are doing software DIRTY bit management and the - * page is currently not DIRTY. - */ - - - do { - old_pte = pte_val(*ptep); - if (old_pte & _PAGE_BUSY) - goto out; - new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED; - } while(old_pte != __cmpxchg_u64((unsigned long *)ptep, - old_pte, new_pte)); - - rflags = 0x2 | (!(new_pte & _PAGE_RW)); - /* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */ - rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N); - shift = mmu_psize_to_shift(mmu_psize); - sz = ((1UL) << shift); - if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE)) - /* No CPU has hugepages but lacks no execute, so we - * don't need to worry about that case */ - rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte), - trap, sz); - - /* Check if pte already has an hpte (case 2) */ - if (unlikely(old_pte & _PAGE_HASHPTE)) { - /* There MIGHT be an HPTE for this pte */ - unsigned long hash, slot; - - hash = hpt_hash(va, shift, ssize); - if (old_pte & _PAGE_F_SECOND) - hash = ~hash; - slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; - slot += (old_pte & _PAGE_F_GIX) >> 12; - - if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize, - ssize, local) == -1) - old_pte &= ~_PAGE_HPTEFLAGS; - } - - if (likely(!(old_pte & _PAGE_HASHPTE))) { - unsigned long hash = hpt_hash(va, shift, ssize); - unsigned long hpte_group; - - pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT; - -repeat: - hpte_group = ((hash & htab_hash_mask) * - HPTES_PER_GROUP) & ~0x7UL; - - /* clear HPTE slot informations in new PTE */ -#ifdef CONFIG_PPC_64K_PAGES - new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0; -#else - new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE; -#endif - /* Add in WIMG bits */ - rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE | - _PAGE_COHERENT | _PAGE_GUARDED)); - - /* Insert into the hash table, primary slot */ - slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0, - mmu_psize, ssize); - - /* Primary is full, try the secondary */ - if (unlikely(slot == -1)) { - hpte_group = ((~hash & htab_hash_mask) * - HPTES_PER_GROUP) & ~0x7UL; - slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, - HPTE_V_SECONDARY, - mmu_psize, ssize); - if (slot == -1) { - if (mftb() & 0x1) - hpte_group = ((hash & htab_hash_mask) * - HPTES_PER_GROUP)&~0x7UL; - - ppc_md.hpte_remove(hpte_group); - goto repeat; - } - } - - if (unlikely(slot == -2)) - panic("hash_huge_page: pte_insert failed\n"); - - new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX); - } + if (shift == PAGE_SHIFT_64K) + return -EINVAL; +#endif /* CONFIG_SPU_FS_64K_LS */ - /* - * No need to use ldarx/stdcx here - */ - *ptep = __pte(new_pte & ~_PAGE_BUSY); + BUG_ON(mmu_psize_defs[mmu_psize].shift != shift); - err = 0; + /* Return if huge page size has already been setup */ + if (size_to_hstate(size)) + return 0; - out: - return err; -} + hugetlb_add_hstate(shift - PAGE_SHIFT); -static void __init set_huge_psize(int psize) -{ - /* Check that it is a page size supported by the hardware and - * that it fits within pagetable limits. */ - if (mmu_psize_defs[psize].shift && - mmu_psize_defs[psize].shift < SID_SHIFT_1T && - (mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT || - mmu_psize_defs[psize].shift == PAGE_SHIFT_64K || - mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) { - /* Return if huge page size has already been setup or is the - * same as the base page size. */ - if (mmu_huge_psizes[psize] || - mmu_psize_defs[psize].shift == PAGE_SHIFT) - return; - if (WARN_ON(HUGEPTE_CACHE_NAME(psize) == NULL)) - return; - hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT); - - switch (mmu_psize_defs[psize].shift) { - case PAGE_SHIFT_64K: - /* We only allow 64k hpages with 4k base page, - * which was checked above, and always put them - * at the PMD */ - hugepte_shift[psize] = PMD_SHIFT; - break; - case PAGE_SHIFT_16M: - /* 16M pages can be at two different levels - * of pagestables based on base page size */ - if (PAGE_SHIFT == PAGE_SHIFT_64K) - hugepte_shift[psize] = PMD_SHIFT; - else /* 4k base page */ - hugepte_shift[psize] = PUD_SHIFT; - break; - case PAGE_SHIFT_16G: - /* 16G pages are always at PGD level */ - hugepte_shift[psize] = PGDIR_SHIFT; - break; - } - hugepte_shift[psize] -= mmu_psize_defs[psize].shift; - } else - hugepte_shift[psize] = 0; + return 0; } static int __init hugepage_setup_sz(char *str) { unsigned long long size; - int mmu_psize; - int shift; size = memparse(str, &str); - shift = __ffs(size); - mmu_psize = shift_to_mmu_psize(shift); - if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift) - set_huge_psize(mmu_psize); - else + if (add_huge_page_size(size) != 0) printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size); return 1; @@ -752,41 +526,55 @@ __setup("hugepagesz=", hugepage_setup_sz); static int __init hugetlbpage_init(void) { - unsigned int psize; + int psize; if (!cpu_has_feature(CPU_FTR_16M_PAGE)) return -ENODEV; - /* Add supported huge page sizes. Need to change HUGE_MAX_HSTATE - * and adjust PTE_NONCACHE_NUM if the number of supported huge page - * sizes changes. - */ - set_huge_psize(MMU_PAGE_16M); - set_huge_psize(MMU_PAGE_16G); + for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { + unsigned shift; + unsigned pdshift; - /* Temporarily disable support for 64K huge pages when 64K SPU local - * store support is enabled as the current implementation conflicts. - */ -#ifndef CONFIG_SPU_FS_64K_LS - set_huge_psize(MMU_PAGE_64K); -#endif + if (!mmu_psize_defs[psize].shift) + continue; - for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) { - if (mmu_huge_psizes[psize]) { - pgtable_cache[HUGE_PGTABLE_INDEX(psize)] = - kmem_cache_create( - HUGEPTE_CACHE_NAME(psize), - HUGEPTE_TABLE_SIZE(psize), - HUGEPTE_TABLE_SIZE(psize), - 0, - NULL); - if (!pgtable_cache[HUGE_PGTABLE_INDEX(psize)]) - panic("hugetlbpage_init(): could not create %s"\ - "\n", HUGEPTE_CACHE_NAME(psize)); - } + shift = mmu_psize_to_shift(psize); + + if (add_huge_page_size(1ULL << shift) < 0) + continue; + + if (shift < PMD_SHIFT) + pdshift = PMD_SHIFT; + else if (shift < PUD_SHIFT) + pdshift = PUD_SHIFT; + else + pdshift = PGDIR_SHIFT; + + pgtable_cache_add(pdshift - shift, NULL); + if (!PGT_CACHE(pdshift - shift)) + panic("hugetlbpage_init(): could not create " + "pgtable cache for %d bit pagesize\n", shift); } + /* Set default large page size. Currently, we pick 16M or 1M + * depending on what is available + */ + if (mmu_psize_defs[MMU_PAGE_16M].shift) + HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift; + else if (mmu_psize_defs[MMU_PAGE_1M].shift) + HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift; + return 0; } module_init(hugetlbpage_init); + +void flush_dcache_icache_hugepage(struct page *page) +{ + int i; + + BUG_ON(!PageCompound(page)); + + for (i = 0; i < (1UL << compound_order(page)); i++) + __flush_dcache_icache(page_address(page+i)); +} diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 335c578b9cc3..776f28d02b6b 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -41,6 +41,7 @@ #include <linux/module.h> #include <linux/poison.h> #include <linux/lmb.h> +#include <linux/hugetlb.h> #include <asm/pgalloc.h> #include <asm/page.h> @@ -119,30 +120,63 @@ static void pmd_ctor(void *addr) memset(addr, 0, PMD_TABLE_SIZE); } -static const unsigned int pgtable_cache_size[2] = { - PGD_TABLE_SIZE, PMD_TABLE_SIZE -}; -static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = { -#ifdef CONFIG_PPC_64K_PAGES - "pgd_cache", "pmd_cache", -#else - "pgd_cache", "pud_pmd_cache", -#endif /* CONFIG_PPC_64K_PAGES */ -}; - -#ifdef CONFIG_HUGETLB_PAGE -/* Hugepages need an extra cache per hugepagesize, initialized in - * hugetlbpage.c. We can't put into the tables above, because HPAGE_SHIFT - * is not compile time constant. */ -struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT]; -#else -struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; -#endif +struct kmem_cache *pgtable_cache[MAX_PGTABLE_INDEX_SIZE]; + +/* + * Create a kmem_cache() for pagetables. This is not used for PTE + * pages - they're linked to struct page, come from the normal free + * pages pool and have a different entry size (see real_pte_t) to + * everything else. Caches created by this function are used for all + * the higher level pagetables, and for hugepage pagetables. + */ +void pgtable_cache_add(unsigned shift, void (*ctor)(void *)) +{ + char *name; + unsigned long table_size = sizeof(void *) << shift; + unsigned long align = table_size; + + /* When batching pgtable pointers for RCU freeing, we store + * the index size in the low bits. Table alignment must be + * big enough to fit it. + * + * Likewise, hugeapge pagetable pointers contain a (different) + * shift value in the low bits. All tables must be aligned so + * as to leave enough 0 bits in the address to contain it. */ + unsigned long minalign = max(MAX_PGTABLE_INDEX_SIZE + 1, + HUGEPD_SHIFT_MASK + 1); + struct kmem_cache *new; + + /* It would be nice if this was a BUILD_BUG_ON(), but at the + * moment, gcc doesn't seem to recognize is_power_of_2 as a + * constant expression, so so much for that. */ + BUG_ON(!is_power_of_2(minalign)); + BUG_ON((shift < 1) || (shift > MAX_PGTABLE_INDEX_SIZE)); + + if (PGT_CACHE(shift)) + return; /* Already have a cache of this size */ + + align = max_t(unsigned long, align, minalign); + name = kasprintf(GFP_KERNEL, "pgtable-2^%d", shift); + new = kmem_cache_create(name, table_size, align, 0, ctor); + PGT_CACHE(shift) = new; + + pr_debug("Allocated pgtable cache for order %d\n", shift); +} + void pgtable_cache_init(void) { - pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor); - pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor); + pgtable_cache_add(PGD_INDEX_SIZE, pgd_ctor); + pgtable_cache_add(PMD_INDEX_SIZE, pmd_ctor); + if (!PGT_CACHE(PGD_INDEX_SIZE) || !PGT_CACHE(PMD_INDEX_SIZE)) + panic("Couldn't allocate pgtable caches"); + + /* In all current configs, when the PUD index exists it's the + * same size as either the pgd or pmd index. Verify that the + * initialization above has also created a PUD cache. This + * will need re-examiniation if we add new possibilities for + * the pagetable layout. */ + BUG_ON(PUD_INDEX_SIZE && !PGT_CACHE(PUD_INDEX_SIZE)); } #ifdef CONFIG_SPARSEMEM_VMEMMAP diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 59736317bf0e..b9b152558f9c 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -32,6 +32,7 @@ #include <linux/pagemap.h> #include <linux/suspend.h> #include <linux/lmb.h> +#include <linux/hugetlb.h> #include <asm/pgalloc.h> #include <asm/prom.h> @@ -417,18 +418,26 @@ EXPORT_SYMBOL(flush_dcache_page); void flush_dcache_icache_page(struct page *page) { +#ifdef CONFIG_HUGETLB_PAGE + if (PageCompound(page)) { + flush_dcache_icache_hugepage(page); + return; + } +#endif #ifdef CONFIG_BOOKE - void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE); - __flush_dcache_icache(start); - kunmap_atomic(start, KM_PPC_SYNC_ICACHE); + { + void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE); + __flush_dcache_icache(start); + kunmap_atomic(start, KM_PPC_SYNC_ICACHE); + } #elif defined(CONFIG_8xx) || defined(CONFIG_PPC64) /* On 8xx there is no need to kmap since highmem is not supported */ __flush_dcache_icache(page_address(page)); #else __flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT); #endif - } + void clear_user_page(void *page, unsigned long vaddr, struct page *pg) { clear_page(page); diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c index dbeb86ac90cd..b910d37aea1a 100644 --- a/arch/powerpc/mm/mmu_context_hash64.c +++ b/arch/powerpc/mm/mmu_context_hash64.c @@ -18,6 +18,7 @@ #include <linux/mm.h> #include <linux/spinlock.h> #include <linux/idr.h> +#include <linux/module.h> #include <asm/mmu_context.h> @@ -32,7 +33,7 @@ static DEFINE_IDR(mmu_context_idr); #define NO_CONTEXT 0 #define MAX_CONTEXT ((1UL << 19) - 1) -int init_new_context(struct task_struct *tsk, struct mm_struct *mm) +int __init_new_context(void) { int index; int err; @@ -57,22 +58,41 @@ again: return -ENOMEM; } + return index; +} +EXPORT_SYMBOL_GPL(__init_new_context); + +int init_new_context(struct task_struct *tsk, struct mm_struct *mm) +{ + int index; + + index = __init_new_context(); + if (index < 0) + return index; + /* The old code would re-promote on fork, we don't do that * when using slices as it could cause problem promoting slices * that have been forced down to 4K */ if (slice_mm_new_context(mm)) slice_set_user_psize(mm, mmu_virtual_psize); + subpage_prot_init_new_context(mm); mm->context.id = index; return 0; } -void destroy_context(struct mm_struct *mm) +void __destroy_context(int context_id) { spin_lock(&mmu_context_lock); - idr_remove(&mmu_context_idr, mm->context.id); + idr_remove(&mmu_context_idr, context_id); spin_unlock(&mmu_context_lock); +} +EXPORT_SYMBOL_GPL(__destroy_context); +void destroy_context(struct mm_struct *mm) +{ + __destroy_context(mm->context.id); + subpage_prot_free(mm); mm->context.id = NO_CONTEXT; } diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index d2e5321d5ea6..e27a990af42d 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -98,21 +98,10 @@ extern void _tlbia(void); #ifdef CONFIG_PPC32 -struct tlbcam { - u32 MAS0; - u32 MAS1; - u32 MAS2; - u32 MAS3; - u32 MAS7; -}; - extern void mapin_ram(void); extern int map_page(unsigned long va, phys_addr_t pa, int flags); extern void setbat(int index, unsigned long virt, phys_addr_t phys, unsigned int size, int flags); -extern void settlbcam(int index, unsigned long virt, phys_addr_t phys, - unsigned int size, int flags, unsigned int pid); -extern void invalidate_tlbcam_entry(int index); extern int __map_without_bats; extern unsigned long ioremap_base; diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index 53040931de32..99df697c601a 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -49,12 +49,12 @@ struct pte_freelist_batch { struct rcu_head rcu; unsigned int index; - pgtable_free_t tables[0]; + unsigned long tables[0]; }; #define PTE_FREELIST_SIZE \ ((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \ - / sizeof(pgtable_free_t)) + / sizeof(unsigned long)) static void pte_free_smp_sync(void *arg) { @@ -64,13 +64,13 @@ static void pte_free_smp_sync(void *arg) /* This is only called when we are critically out of memory * (and fail to get a page in pte_free_tlb). */ -static void pgtable_free_now(pgtable_free_t pgf) +static void pgtable_free_now(void *table, unsigned shift) { pte_freelist_forced_free++; smp_call_function(pte_free_smp_sync, NULL, 1); - pgtable_free(pgf); + pgtable_free(table, shift); } static void pte_free_rcu_callback(struct rcu_head *head) @@ -79,8 +79,12 @@ static void pte_free_rcu_callback(struct rcu_head *head) container_of(head, struct pte_freelist_batch, rcu); unsigned int i; - for (i = 0; i < batch->index; i++) - pgtable_free(batch->tables[i]); + for (i = 0; i < batch->index; i++) { + void *table = (void *)(batch->tables[i] & ~MAX_PGTABLE_INDEX_SIZE); + unsigned shift = batch->tables[i] & MAX_PGTABLE_INDEX_SIZE; + + pgtable_free(table, shift); + } free_page((unsigned long)batch); } @@ -91,25 +95,28 @@ static void pte_free_submit(struct pte_freelist_batch *batch) call_rcu(&batch->rcu, pte_free_rcu_callback); } -void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf) +void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift) { /* This is safe since tlb_gather_mmu has disabled preemption */ struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur); + unsigned long pgf; if (atomic_read(&tlb->mm->mm_users) < 2 || cpumask_equal(mm_cpumask(tlb->mm), cpumask_of(smp_processor_id()))){ - pgtable_free(pgf); + pgtable_free(table, shift); return; } if (*batchp == NULL) { *batchp = (struct pte_freelist_batch *)__get_free_page(GFP_ATOMIC); if (*batchp == NULL) { - pgtable_free_now(pgf); + pgtable_free_now(table, shift); return; } (*batchp)->index = 0; } + BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE); + pgf = (unsigned long)table | shift; (*batchp)->tables[(*batchp)->index++] = pgf; if ((*batchp)->index == PTE_FREELIST_SIZE) { pte_free_submit(*batchp); diff --git a/arch/powerpc/mm/subpage-prot.c b/arch/powerpc/mm/subpage-prot.c index 4cafc0c33d0a..a040b81e93bd 100644 --- a/arch/powerpc/mm/subpage-prot.c +++ b/arch/powerpc/mm/subpage-prot.c @@ -24,9 +24,9 @@ * Also makes sure that the subpage_prot_table structure is * reinitialized for the next user. */ -void subpage_prot_free(pgd_t *pgd) +void subpage_prot_free(struct mm_struct *mm) { - struct subpage_prot_table *spt = pgd_subpage_prot(pgd); + struct subpage_prot_table *spt = &mm->context.spt; unsigned long i, j, addr; u32 **p; @@ -51,6 +51,13 @@ void subpage_prot_free(pgd_t *pgd) spt->maxaddr = 0; } +void subpage_prot_init_new_context(struct mm_struct *mm) +{ + struct subpage_prot_table *spt = &mm->context.spt; + + memset(spt, 0, sizeof(*spt)); +} + static void hpte_flush_range(struct mm_struct *mm, unsigned long addr, int npages) { @@ -87,7 +94,7 @@ static void hpte_flush_range(struct mm_struct *mm, unsigned long addr, static void subpage_prot_clear(unsigned long addr, unsigned long len) { struct mm_struct *mm = current->mm; - struct subpage_prot_table *spt = pgd_subpage_prot(mm->pgd); + struct subpage_prot_table *spt = &mm->context.spt; u32 **spm, *spp; int i, nw; unsigned long next, limit; @@ -136,7 +143,7 @@ static void subpage_prot_clear(unsigned long addr, unsigned long len) long sys_subpage_prot(unsigned long addr, unsigned long len, u32 __user *map) { struct mm_struct *mm = current->mm; - struct subpage_prot_table *spt = pgd_subpage_prot(mm->pgd); + struct subpage_prot_table *spt = &mm->context.spt; u32 **spm, *spp; int i, nw; unsigned long next, limit; diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index 2b2f35f6985e..282d9306361f 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -53,11 +53,6 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, i = batch->index; - /* We mask the address for the base page size. Huge pages will - * have applied their own masking already - */ - addr &= PAGE_MASK; - /* Get page size (maybe move back to caller). * * NOTE: when using special 64K mappings in 4K environment like @@ -75,6 +70,9 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr, } else psize = pte_pagesize_index(mm, addr, pte); + /* Mask the address for the correct page size */ + addr &= ~((1UL << mmu_psize_defs[psize].shift) - 1); + /* Build full vaddr */ if (!is_kernel_addr(addr)) { ssize = user_segment_size(addr); diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c index a6ce80566625..da9b20a63769 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c @@ -79,7 +79,7 @@ cpld_unmask_irq(unsigned int irq) } static struct irq_chip cpld_pic = { - .typename = " CPLD PIC ", + .name = " CPLD PIC ", .mask = cpld_mask_irq, .ack = cpld_mask_irq, .unmask = cpld_unmask_irq, @@ -132,7 +132,7 @@ static int cpld_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq); return 0; } diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 8b8e9560a315..47ea1be1481b 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -62,3 +62,8 @@ config PPC_MPC5200_GPIO select GENERIC_GPIO help Enable gpiolib support for mpc5200 based boards + +config PPC_MPC5200_LPBFIFO + tristate "MPC5200 LocalPlus bus FIFO driver" + depends on PPC_MPC52xx + select PPC_BESTCOMM_GEN_BD diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index bfd4f52cf3dd..2bc8cd0c5cfc 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -15,3 +15,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y) endif obj-$(CONFIG_PPC_MPC5200_GPIO) += mpc52xx_gpio.o +obj-$(CONFIG_PPC_MPC5200_LPBFIFO) += mpc52xx_lpbfifo.o diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c index 68e4f1696d14..cc0c854291d7 100644 --- a/arch/powerpc/platforms/52xx/media5200.c +++ b/arch/powerpc/platforms/52xx/media5200.c @@ -74,7 +74,7 @@ static void media5200_irq_mask(unsigned int virq) } static struct irq_chip media5200_irq_chip = { - .typename = "Media5200 FPGA", + .name = "Media5200 FPGA", .unmask = media5200_irq_unmask, .mask = media5200_irq_mask, .mask_ack = media5200_irq_mask, @@ -114,7 +114,7 @@ void media5200_irq_cascade(unsigned int virq, struct irq_desc *desc) static int media5200_irq_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); pr_debug("%s: h=%p, virq=%i, hwirq=%i\n", __func__, h, virq, (int)hw); set_irq_chip_data(virq, &media5200_irq); @@ -127,7 +127,7 @@ static int media5200_irq_map(struct irq_host *h, unsigned int virq, } static int media5200_irq_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index bfbcd418e690..6f8ebe1085b3 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -16,8 +16,14 @@ * output signals or measure input signals. * * This driver supports the GPIO and IRQ controller functions of the GPT - * device. Timer functions are not yet supported, nor is the watchdog - * timer. + * device. Timer functions are not yet supported. + * + * The timer gpt0 can be used as watchdog (wdt). If the wdt mode is used, + * this prevents the use of any gpt0 gpt function (i.e. they will fail with + * -EBUSY). Thus, the safety wdt function always has precedence over the gpt + * function. If the kernel has been compiled with CONFIG_WATCHDOG_NOWAYOUT, + * this means that gpt0 is locked in wdt mode until the next reboot - this + * may be a requirement in safety applications. * * To use the GPIO function, the following two properties must be added * to the device tree node for the gpt device (typically in the .dts file @@ -46,17 +52,24 @@ * the output mode. This driver does not change the output mode setting. */ +#include <linux/device.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/list.h> +#include <linux/mutex.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/of_gpio.h> #include <linux/kernel.h> +#include <linux/watchdog.h> +#include <linux/miscdevice.h> +#include <linux/uaccess.h> +#include <asm/div64.h> #include <asm/mpc52xx.h> MODULE_DESCRIPTION("Freescale MPC52xx gpt driver"); -MODULE_AUTHOR("Sascha Hauer, Grant Likely"); +MODULE_AUTHOR("Sascha Hauer, Grant Likely, Albrecht Dreß"); MODULE_LICENSE("GPL"); /** @@ -66,18 +79,27 @@ MODULE_LICENSE("GPL"); * @lock: spinlock to coordinate between different functions. * @of_gc: of_gpio_chip instance structure; used when GPIO is enabled * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported + * @wdt_mode: only relevant for gpt0: bit 0 (MPC52xx_GPT_CAN_WDT) indicates + * if the gpt may be used as wdt, bit 1 (MPC52xx_GPT_IS_WDT) indicates + * if the timer is actively used as wdt which blocks gpt functions */ struct mpc52xx_gpt_priv { + struct list_head list; /* List of all GPT devices */ struct device *dev; struct mpc52xx_gpt __iomem *regs; spinlock_t lock; struct irq_host *irqhost; + u32 ipb_freq; + u8 wdt_mode; #if defined(CONFIG_GPIOLIB) struct of_gpio_chip of_gc; #endif }; +LIST_HEAD(mpc52xx_gpt_list); +DEFINE_MUTEX(mpc52xx_gpt_list_mutex); + #define MPC52xx_GPT_MODE_MS_MASK (0x07) #define MPC52xx_GPT_MODE_MS_IC (0x01) #define MPC52xx_GPT_MODE_MS_OC (0x02) @@ -88,15 +110,25 @@ struct mpc52xx_gpt_priv { #define MPC52xx_GPT_MODE_GPIO_OUT_LOW (0x20) #define MPC52xx_GPT_MODE_GPIO_OUT_HIGH (0x30) +#define MPC52xx_GPT_MODE_COUNTER_ENABLE (0x1000) +#define MPC52xx_GPT_MODE_CONTINUOUS (0x0400) +#define MPC52xx_GPT_MODE_OPEN_DRAIN (0x0200) #define MPC52xx_GPT_MODE_IRQ_EN (0x0100) +#define MPC52xx_GPT_MODE_WDT_EN (0x8000) #define MPC52xx_GPT_MODE_ICT_MASK (0x030000) #define MPC52xx_GPT_MODE_ICT_RISING (0x010000) #define MPC52xx_GPT_MODE_ICT_FALLING (0x020000) #define MPC52xx_GPT_MODE_ICT_TOGGLE (0x030000) +#define MPC52xx_GPT_MODE_WDT_PING (0xa5) + #define MPC52xx_GPT_STATUS_IRQMASK (0x000f) +#define MPC52xx_GPT_CAN_WDT (1 << 0) +#define MPC52xx_GPT_IS_WDT (1 << 1) + + /* --------------------------------------------------------------------- * Cascaded interrupt controller hooks */ @@ -149,7 +181,7 @@ static int mpc52xx_gpt_irq_set_type(unsigned int virq, unsigned int flow_type) } static struct irq_chip mpc52xx_gpt_irq_chip = { - .typename = "MPC52xx GPT", + .name = "MPC52xx GPT", .unmask = mpc52xx_gpt_irq_unmask, .mask = mpc52xx_gpt_irq_mask, .ack = mpc52xx_gpt_irq_ack, @@ -182,7 +214,7 @@ static int mpc52xx_gpt_irq_map(struct irq_host *h, unsigned int virq, } static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { @@ -190,7 +222,7 @@ static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct, dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]); - if ((intsize < 1) || (intspec[0] < 1) || (intspec[0] > 3)) { + if ((intsize < 1) || (intspec[0] > 3)) { dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name); return -EINVAL; } @@ -211,13 +243,11 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) { int cascade_virq; unsigned long flags; - - /* Only setup cascaded IRQ if device tree claims the GPT is - * an interrupt controller */ - if (!of_find_property(node, "interrupt-controller", NULL)) - return; + u32 mode; cascade_virq = irq_of_parse_and_map(node, 0); + if (!cascade_virq) + return; gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1, &mpc52xx_gpt_irq_ops, -1); @@ -227,14 +257,16 @@ mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) } gpt->irqhost->host_data = gpt; - set_irq_data(cascade_virq, gpt); set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade); - /* Set to Input Capture mode */ + /* If the GPT is currently disabled, then change it to be in Input + * Capture mode. If the mode is non-zero, then the pin could be + * already in use for something. */ spin_lock_irqsave(&gpt->lock, flags); - clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK, - MPC52xx_GPT_MODE_MS_IC); + mode = in_be32(&gpt->regs->mode); + if ((mode & MPC52xx_GPT_MODE_MS_MASK) == 0) + out_be32(&gpt->regs->mode, mode | MPC52xx_GPT_MODE_MS_IC); spin_unlock_irqrestore(&gpt->lock, flags); dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq); @@ -335,6 +367,354 @@ static void mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { } #endif /* defined(CONFIG_GPIOLIB) */ +/*********************************************************************** + * Timer API + */ + +/** + * mpc52xx_gpt_from_irq - Return the GPT device associated with an IRQ number + * @irq: irq of timer. + */ +struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq) +{ + struct mpc52xx_gpt_priv *gpt; + struct list_head *pos; + + /* Iterate over the list of timers looking for a matching device */ + mutex_lock(&mpc52xx_gpt_list_mutex); + list_for_each(pos, &mpc52xx_gpt_list) { + gpt = container_of(pos, struct mpc52xx_gpt_priv, list); + if (gpt->irqhost && irq == irq_linear_revmap(gpt->irqhost, 0)) { + mutex_unlock(&mpc52xx_gpt_list_mutex); + return gpt; + } + } + mutex_unlock(&mpc52xx_gpt_list_mutex); + + return NULL; +} +EXPORT_SYMBOL(mpc52xx_gpt_from_irq); + +static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period, + int continuous, int as_wdt) +{ + u32 clear, set; + u64 clocks; + u32 prescale; + unsigned long flags; + + clear = MPC52xx_GPT_MODE_MS_MASK | MPC52xx_GPT_MODE_CONTINUOUS; + set = MPC52xx_GPT_MODE_MS_GPIO | MPC52xx_GPT_MODE_COUNTER_ENABLE; + if (as_wdt) { + clear |= MPC52xx_GPT_MODE_IRQ_EN; + set |= MPC52xx_GPT_MODE_WDT_EN; + } else if (continuous) + set |= MPC52xx_GPT_MODE_CONTINUOUS; + + /* Determine the number of clocks in the requested period. 64 bit + * arithmatic is done here to preserve the precision until the value + * is scaled back down into the u32 range. Period is in 'ns', bus + * frequency is in Hz. */ + clocks = period * (u64)gpt->ipb_freq; + do_div(clocks, 1000000000); /* Scale it down to ns range */ + + /* This device cannot handle a clock count greater than 32 bits */ + if (clocks > 0xffffffff) + return -EINVAL; + + /* Calculate the prescaler and count values from the clocks value. + * 'clocks' is the number of clock ticks in the period. The timer + * has 16 bit precision and a 16 bit prescaler. Prescaler is + * calculated by integer dividing the clocks by 0x10000 (shifting + * down 16 bits) to obtain the smallest possible divisor for clocks + * to get a 16 bit count value. + * + * Note: the prescale register is '1' based, not '0' based. ie. a + * value of '1' means divide the clock by one. 0xffff divides the + * clock by 0xffff. '0x0000' does not divide by zero, but wraps + * around and divides by 0x10000. That is why prescale must be + * a u32 variable, not a u16, for this calculation. */ + prescale = (clocks >> 16) + 1; + do_div(clocks, prescale); + if (clocks > 0xffff) { + pr_err("calculation error; prescale:%x clocks:%llx\n", + prescale, clocks); + return -EINVAL; + } + + /* Set and enable the timer, reject an attempt to use a wdt as gpt */ + spin_lock_irqsave(&gpt->lock, flags); + if (as_wdt) + gpt->wdt_mode |= MPC52xx_GPT_IS_WDT; + else if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) { + spin_unlock_irqrestore(&gpt->lock, flags); + return -EBUSY; + } + out_be32(&gpt->regs->count, prescale << 16 | clocks); + clrsetbits_be32(&gpt->regs->mode, clear, set); + spin_unlock_irqrestore(&gpt->lock, flags); + + return 0; +} + +/** + * mpc52xx_gpt_start_timer - Set and enable the GPT timer + * @gpt: Pointer to gpt private data structure + * @period: period of timer in ns; max. ~130s @ 33MHz IPB clock + * @continuous: set to 1 to make timer continuous free running + * + * An interrupt will be generated every time the timer fires + */ +int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period, + int continuous) +{ + return mpc52xx_gpt_do_start(gpt, period, continuous, 0); +} +EXPORT_SYMBOL(mpc52xx_gpt_start_timer); + +/** + * mpc52xx_gpt_stop_timer - Stop a gpt + * @gpt: Pointer to gpt private data structure + * + * Returns an error if attempting to stop a wdt + */ +int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt) +{ + unsigned long flags; + + /* reject the operation if the timer is used as watchdog (gpt 0 only) */ + spin_lock_irqsave(&gpt->lock, flags); + if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) { + spin_unlock_irqrestore(&gpt->lock, flags); + return -EBUSY; + } + + clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_COUNTER_ENABLE); + spin_unlock_irqrestore(&gpt->lock, flags); + return 0; +} +EXPORT_SYMBOL(mpc52xx_gpt_stop_timer); + +/** + * mpc52xx_gpt_timer_period - Read the timer period + * @gpt: Pointer to gpt private data structure + * + * Returns the timer period in ns + */ +u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt) +{ + u64 period; + u64 prescale; + unsigned long flags; + + spin_lock_irqsave(&gpt->lock, flags); + period = in_be32(&gpt->regs->count); + spin_unlock_irqrestore(&gpt->lock, flags); + + prescale = period >> 16; + period &= 0xffff; + if (prescale == 0) + prescale = 0x10000; + period = period * prescale * 1000000000ULL; + do_div(period, (u64)gpt->ipb_freq); + return period; +} +EXPORT_SYMBOL(mpc52xx_gpt_timer_period); + +#if defined(CONFIG_MPC5200_WDT) +/*********************************************************************** + * Watchdog API for gpt0 + */ + +#define WDT_IDENTITY "mpc52xx watchdog on GPT0" + +/* wdt_is_active stores wether or not the /dev/watchdog device is opened */ +static unsigned long wdt_is_active; + +/* wdt-capable gpt */ +static struct mpc52xx_gpt_priv *mpc52xx_gpt_wdt; + +/* low-level wdt functions */ +static inline void mpc52xx_gpt_wdt_ping(struct mpc52xx_gpt_priv *gpt_wdt) +{ + unsigned long flags; + + spin_lock_irqsave(&gpt_wdt->lock, flags); + out_8((u8 *) &gpt_wdt->regs->mode, MPC52xx_GPT_MODE_WDT_PING); + spin_unlock_irqrestore(&gpt_wdt->lock, flags); +} + +/* wdt misc device api */ +static ssize_t mpc52xx_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + struct mpc52xx_gpt_priv *gpt_wdt = file->private_data; + mpc52xx_gpt_wdt_ping(gpt_wdt); + return 0; +} + +static struct watchdog_info mpc5200_wdt_info = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = WDT_IDENTITY, +}; + +static long mpc52xx_wdt_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct mpc52xx_gpt_priv *gpt_wdt = file->private_data; + int __user *data = (int __user *)arg; + int timeout; + u64 real_timeout; + int ret = 0; + + switch (cmd) { + case WDIOC_GETSUPPORT: + ret = copy_to_user(data, &mpc5200_wdt_info, + sizeof(mpc5200_wdt_info)); + if (ret) + ret = -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + ret = put_user(0, data); + break; + + case WDIOC_KEEPALIVE: + mpc52xx_gpt_wdt_ping(gpt_wdt); + break; + + case WDIOC_SETTIMEOUT: + ret = get_user(timeout, data); + if (ret) + break; + real_timeout = (u64) timeout * 1000000000ULL; + ret = mpc52xx_gpt_do_start(gpt_wdt, real_timeout, 0, 1); + if (ret) + break; + /* fall through and return the timeout */ + + case WDIOC_GETTIMEOUT: + /* we need to round here as to avoid e.g. the following + * situation: + * - timeout requested is 1 second; + * - real timeout @33MHz is 999997090ns + * - the int divide by 10^9 will return 0. + */ + real_timeout = + mpc52xx_gpt_timer_period(gpt_wdt) + 500000000ULL; + do_div(real_timeout, 1000000000ULL); + timeout = (int) real_timeout; + ret = put_user(timeout, data); + break; + + default: + ret = -ENOTTY; + } + return ret; +} + +static int mpc52xx_wdt_open(struct inode *inode, struct file *file) +{ + int ret; + + /* sanity check */ + if (!mpc52xx_gpt_wdt) + return -ENODEV; + + /* /dev/watchdog can only be opened once */ + if (test_and_set_bit(0, &wdt_is_active)) + return -EBUSY; + + /* Set and activate the watchdog with 30 seconds timeout */ + ret = mpc52xx_gpt_do_start(mpc52xx_gpt_wdt, 30ULL * 1000000000ULL, + 0, 1); + if (ret) { + clear_bit(0, &wdt_is_active); + return ret; + } + + file->private_data = mpc52xx_gpt_wdt; + return nonseekable_open(inode, file); +} + +static int mpc52xx_wdt_release(struct inode *inode, struct file *file) +{ + /* note: releasing the wdt in NOWAYOUT-mode does not stop it */ +#if !defined(CONFIG_WATCHDOG_NOWAYOUT) + struct mpc52xx_gpt_priv *gpt_wdt = file->private_data; + unsigned long flags; + + spin_lock_irqsave(&gpt_wdt->lock, flags); + clrbits32(&gpt_wdt->regs->mode, + MPC52xx_GPT_MODE_COUNTER_ENABLE | MPC52xx_GPT_MODE_WDT_EN); + gpt_wdt->wdt_mode &= ~MPC52xx_GPT_IS_WDT; + spin_unlock_irqrestore(&gpt_wdt->lock, flags); +#endif + clear_bit(0, &wdt_is_active); + return 0; +} + + +static const struct file_operations mpc52xx_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = mpc52xx_wdt_write, + .unlocked_ioctl = mpc52xx_wdt_ioctl, + .open = mpc52xx_wdt_open, + .release = mpc52xx_wdt_release, +}; + +static struct miscdevice mpc52xx_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &mpc52xx_wdt_fops, +}; + +static int __devinit mpc52xx_gpt_wdt_init(void) +{ + int err; + + /* try to register the watchdog misc device */ + err = misc_register(&mpc52xx_wdt_miscdev); + if (err) + pr_err("%s: cannot register watchdog device\n", WDT_IDENTITY); + else + pr_info("%s: watchdog device registered\n", WDT_IDENTITY); + return err; +} + +static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, + const u32 *period) +{ + u64 real_timeout; + + /* remember the gpt for the wdt operation */ + mpc52xx_gpt_wdt = gpt; + + /* configure the wdt if the device tree contained a timeout */ + if (!period || *period == 0) + return 0; + + real_timeout = (u64) *period * 1000000000ULL; + if (mpc52xx_gpt_do_start(gpt, real_timeout, 0, 1)) + dev_warn(gpt->dev, "starting as wdt failed\n"); + else + dev_info(gpt->dev, "watchdog set to %us timeout\n", *period); + return 0; +} + +#else + +static int __devinit mpc52xx_gpt_wdt_init(void) +{ + return 0; +} + +#define mpc52xx_gpt_wdt_setup(x, y) (0) + +#endif /* CONFIG_MPC5200_WDT */ + /* --------------------------------------------------------------------- * of_platform bus binding code */ @@ -349,6 +729,7 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev, spin_lock_init(&gpt->lock); gpt->dev = &ofdev->dev; + gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->node); gpt->regs = of_iomap(ofdev->node, 0); if (!gpt->regs) { kfree(gpt); @@ -360,6 +741,26 @@ static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev, mpc52xx_gpt_gpio_setup(gpt, ofdev->node); mpc52xx_gpt_irq_setup(gpt, ofdev->node); + mutex_lock(&mpc52xx_gpt_list_mutex); + list_add(&gpt->list, &mpc52xx_gpt_list); + mutex_unlock(&mpc52xx_gpt_list_mutex); + + /* check if this device could be a watchdog */ + if (of_get_property(ofdev->node, "fsl,has-wdt", NULL) || + of_get_property(ofdev->node, "has-wdt", NULL)) { + const u32 *on_boot_wdt; + + gpt->wdt_mode = MPC52xx_GPT_CAN_WDT; + on_boot_wdt = of_get_property(ofdev->node, "fsl,wdt-on-boot", + NULL); + if (on_boot_wdt) { + dev_info(gpt->dev, "used as watchdog\n"); + gpt->wdt_mode |= MPC52xx_GPT_IS_WDT; + } else + dev_info(gpt->dev, "can function as watchdog\n"); + mpc52xx_gpt_wdt_setup(gpt, on_boot_wdt); + } + return 0; } @@ -394,3 +795,4 @@ static int __init mpc52xx_gpt_init(void) /* Make sure GPIOs and IRQs get set up before anyone tries to use them */ subsys_initcall(mpc52xx_gpt_init); +device_initcall(mpc52xx_gpt_wdt_init); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c new file mode 100644 index 000000000000..929d017535a3 --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_lpbfifo.c @@ -0,0 +1,560 @@ +/* + * LocalPlus Bus FIFO driver for the Freescale MPC52xx. + * + * Copyright (C) 2009 Secret Lab Technologies Ltd. + * + * This file is released under the GPLv2 + * + * Todo: + * - Add support for multiple requests to be queued. + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/spinlock.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/mpc52xx.h> +#include <asm/time.h> + +#include <sysdev/bestcomm/bestcomm.h> +#include <sysdev/bestcomm/bestcomm_priv.h> +#include <sysdev/bestcomm/gen_bd.h> + +MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); +MODULE_DESCRIPTION("MPC5200 LocalPlus FIFO device driver"); +MODULE_LICENSE("GPL"); + +#define LPBFIFO_REG_PACKET_SIZE (0x00) +#define LPBFIFO_REG_START_ADDRESS (0x04) +#define LPBFIFO_REG_CONTROL (0x08) +#define LPBFIFO_REG_ENABLE (0x0C) +#define LPBFIFO_REG_BYTES_DONE_STATUS (0x14) +#define LPBFIFO_REG_FIFO_DATA (0x40) +#define LPBFIFO_REG_FIFO_STATUS (0x44) +#define LPBFIFO_REG_FIFO_CONTROL (0x48) +#define LPBFIFO_REG_FIFO_ALARM (0x4C) + +struct mpc52xx_lpbfifo { + struct device *dev; + phys_addr_t regs_phys; + void __iomem *regs; + int irq; + spinlock_t lock; + + struct bcom_task *bcom_tx_task; + struct bcom_task *bcom_rx_task; + struct bcom_task *bcom_cur_task; + + /* Current state data */ + struct mpc52xx_lpbfifo_request *req; + int dma_irqs_enabled; +}; + +/* The MPC5200 has only one fifo, so only need one instance structure */ +static struct mpc52xx_lpbfifo lpbfifo; + +/** + * mpc52xx_lpbfifo_kick - Trigger the next block of data to be transfered + */ +static void mpc52xx_lpbfifo_kick(struct mpc52xx_lpbfifo_request *req) +{ + size_t transfer_size = req->size - req->pos; + struct bcom_bd *bd; + void __iomem *reg; + u32 *data; + int i; + int bit_fields; + int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA); + int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE; + int poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA; + + /* Set and clear the reset bits; is good practice in User Manual */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + + /* set master enable bit */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000001); + if (!dma) { + /* While the FIFO can be setup for transfer sizes as large as + * 16M-1, the FIFO itself is only 512 bytes deep and it does + * not generate interrupts for FIFO full events (only transfer + * complete will raise an IRQ). Therefore when not using + * Bestcomm to drive the FIFO it needs to either be polled, or + * transfers need to constrained to the size of the fifo. + * + * This driver restricts the size of the transfer + */ + if (transfer_size > 512) + transfer_size = 512; + + /* Load the FIFO with data */ + if (write) { + reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA; + data = req->data + req->pos; + for (i = 0; i < transfer_size; i += 4) + out_be32(reg, *data++); + } + + /* Unmask both error and completion irqs */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x00000301); + } else { + /* Choose the correct direction + * + * Configure the watermarks so DMA will always complete correctly. + * It may be worth experimenting with the ALARM value to see if + * there is a performance impacit. However, if it is wrong there + * is a risk of DMA not transferring the last chunk of data + */ + if (write) { + out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1e4); + out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 7); + lpbfifo.bcom_cur_task = lpbfifo.bcom_tx_task; + } else { + out_be32(lpbfifo.regs + LPBFIFO_REG_FIFO_ALARM, 0x1ff); + out_8(lpbfifo.regs + LPBFIFO_REG_FIFO_CONTROL, 0); + lpbfifo.bcom_cur_task = lpbfifo.bcom_rx_task; + + if (poll_dma) { + if (lpbfifo.dma_irqs_enabled) { + disable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task)); + lpbfifo.dma_irqs_enabled = 0; + } + } else { + if (!lpbfifo.dma_irqs_enabled) { + enable_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task)); + lpbfifo.dma_irqs_enabled = 1; + } + } + } + + bd = bcom_prepare_next_buffer(lpbfifo.bcom_cur_task); + bd->status = transfer_size; + if (!write) { + /* + * In the DMA read case, the DMA doesn't complete, + * possibly due to incorrect watermarks in the ALARM + * and CONTROL regs. For now instead of trying to + * determine the right watermarks that will make this + * work, just increase the number of bytes the FIFO is + * expecting. + * + * When submitting another operation, the FIFO will get + * reset, so the condition of the FIFO waiting for a + * non-existent 4 bytes will get cleared. + */ + transfer_size += 4; /* BLECH! */ + } + bd->data[0] = req->data_phys + req->pos; + bcom_submit_next_buffer(lpbfifo.bcom_cur_task, NULL); + + /* error irq & master enabled bit */ + bit_fields = 0x00000201; + + /* Unmask irqs */ + if (write && (!poll_dma)) + bit_fields |= 0x00000100; /* completion irq too */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, bit_fields); + } + + /* Set transfer size, width, chip select and READ mode */ + out_be32(lpbfifo.regs + LPBFIFO_REG_START_ADDRESS, + req->offset + req->pos); + out_be32(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, transfer_size); + + bit_fields = req->cs << 24 | 0x000008; + if (!write) + bit_fields |= 0x010000; /* read mode */ + out_be32(lpbfifo.regs + LPBFIFO_REG_CONTROL, bit_fields); + + /* Kick it off */ + out_8(lpbfifo.regs + LPBFIFO_REG_PACKET_SIZE, 0x01); + if (dma) + bcom_enable(lpbfifo.bcom_cur_task); +} + +/** + * mpc52xx_lpbfifo_irq - IRQ handler for LPB FIFO + * + * On transmit, the dma completion irq triggers before the fifo completion + * triggers. Handle the dma completion here instead of the LPB FIFO Bestcomm + * task completion irq becuase everyting is not really done until the LPB FIFO + * completion irq triggers. + * + * In other words: + * For DMA, on receive, the "Fat Lady" is the bestcom completion irq. on + * transmit, the fifo completion irq is the "Fat Lady". The opera (or in this + * case the DMA/FIFO operation) is not finished until the "Fat Lady" sings. + * + * Reasons for entering this routine: + * 1) PIO mode rx and tx completion irq + * 2) DMA interrupt mode tx completion irq + * 3) DMA polled mode tx + * + * Exit conditions: + * 1) Transfer aborted + * 2) FIFO complete without DMA; more data to do + * 3) FIFO complete without DMA; all data transfered + * 4) FIFO complete using DMA + * + * Condition 1 can occur regardless of whether or not DMA is used. + * It requires executing the callback to report the error and exiting + * immediately. + * + * Condition 2 requires programming the FIFO with the next block of data + * + * Condition 3 requires executing the callback to report completion + * + * Condition 4 means the same as 3, except that we also retrieve the bcom + * buffer so DMA doesn't get clogged up. + * + * To make things trickier, the spinlock must be dropped before + * executing the callback, otherwise we could end up with a deadlock + * or nested spinlock condition. The out path is non-trivial, so + * extra fiddling is done to make sure all paths lead to the same + * outbound code. + */ +static irqreturn_t mpc52xx_lpbfifo_irq(int irq, void *dev_id) +{ + struct mpc52xx_lpbfifo_request *req; + u32 status = in_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS); + void __iomem *reg; + u32 *data; + int count, i; + int do_callback = 0; + u32 ts; + unsigned long flags; + int dma, write, poll_dma; + + spin_lock_irqsave(&lpbfifo.lock, flags); + ts = get_tbl(); + + req = lpbfifo.req; + if (!req) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + pr_err("bogus LPBFIFO IRQ\n"); + return IRQ_HANDLED; + } + + dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA); + write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE; + poll_dma = req->flags & MPC52XX_LPBFIFO_FLAG_POLL_DMA; + + if (dma && !write) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + pr_err("bogus LPBFIFO IRQ (dma and not writting)\n"); + return IRQ_HANDLED; + } + + if ((status & 0x01) == 0) { + goto out; + } + + /* check abort bit */ + if (status & 0x10) { + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + do_callback = 1; + goto out; + } + + /* Read result from hardware */ + count = in_be32(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS); + count &= 0x00ffffff; + + if (!dma && !write) { + /* copy the data out of the FIFO */ + reg = lpbfifo.regs + LPBFIFO_REG_FIFO_DATA; + data = req->data + req->pos; + for (i = 0; i < count; i += 4) + *data++ = in_be32(reg); + } + + /* Update transfer position and count */ + req->pos += count; + + /* Decide what to do next */ + if (req->size - req->pos) + mpc52xx_lpbfifo_kick(req); /* more work to do */ + else + do_callback = 1; + + out: + /* Clear the IRQ */ + out_8(lpbfifo.regs + LPBFIFO_REG_BYTES_DONE_STATUS, 0x01); + + if (dma && (status & 0x11)) { + /* + * Count the DMA as complete only when the FIFO completion + * status or abort bits are set. + * + * (status & 0x01) should always be the case except sometimes + * when using polled DMA. + * + * (status & 0x10) {transfer aborted}: This case needs more + * testing. + */ + bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL); + } + req->last_byte = ((u8 *)req->data)[req->size - 1]; + + /* When the do_callback flag is set; it means the transfer is finished + * so set the FIFO as idle */ + if (do_callback) + lpbfifo.req = NULL; + + if (irq != 0) /* don't increment on polled case */ + req->irq_count++; + + req->irq_ticks += get_tbl() - ts; + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + /* Spinlock is released; it is now safe to call the callback */ + if (do_callback && req->callback) + req->callback(req); + + return IRQ_HANDLED; +} + +/** + * mpc52xx_lpbfifo_bcom_irq - IRQ handler for LPB FIFO Bestcomm task + * + * Only used when receiving data. + */ +static irqreturn_t mpc52xx_lpbfifo_bcom_irq(int irq, void *dev_id) +{ + struct mpc52xx_lpbfifo_request *req; + unsigned long flags; + u32 status; + u32 ts; + + spin_lock_irqsave(&lpbfifo.lock, flags); + ts = get_tbl(); + + req = lpbfifo.req; + if (!req || (req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA)) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return IRQ_HANDLED; + } + + if (irq != 0) /* don't increment on polled case */ + req->irq_count++; + + if (!bcom_buffer_done(lpbfifo.bcom_cur_task)) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + req->buffer_not_done_cnt++; + if ((req->buffer_not_done_cnt % 1000) == 0) + pr_err("transfer stalled\n"); + + return IRQ_HANDLED; + } + + bcom_retrieve_buffer(lpbfifo.bcom_cur_task, &status, NULL); + + req->last_byte = ((u8 *)req->data)[req->size - 1]; + + req->pos = status & 0x00ffffff; + + /* Mark the FIFO as idle */ + lpbfifo.req = NULL; + + /* Release the lock before calling out to the callback. */ + req->irq_ticks += get_tbl() - ts; + spin_unlock_irqrestore(&lpbfifo.lock, flags); + + if (req->callback) + req->callback(req); + + return IRQ_HANDLED; +} + +/** + * mpc52xx_lpbfifo_bcom_poll - Poll for DMA completion + */ +void mpc52xx_lpbfifo_poll(void) +{ + struct mpc52xx_lpbfifo_request *req = lpbfifo.req; + int dma = !(req->flags & MPC52XX_LPBFIFO_FLAG_NO_DMA); + int write = req->flags & MPC52XX_LPBFIFO_FLAG_WRITE; + + /* + * For more information, see comments on the "Fat Lady" + */ + if (dma && write) + mpc52xx_lpbfifo_irq(0, NULL); + else + mpc52xx_lpbfifo_bcom_irq(0, NULL); +} +EXPORT_SYMBOL(mpc52xx_lpbfifo_poll); + +/** + * mpc52xx_lpbfifo_submit - Submit an LPB FIFO transfer request. + * @req: Pointer to request structure + */ +int mpc52xx_lpbfifo_submit(struct mpc52xx_lpbfifo_request *req) +{ + unsigned long flags; + + if (!lpbfifo.regs) + return -ENODEV; + + spin_lock_irqsave(&lpbfifo.lock, flags); + + /* If the req pointer is already set, then a transfer is in progress */ + if (lpbfifo.req) { + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return -EBUSY; + } + + /* Setup the transfer */ + lpbfifo.req = req; + req->irq_count = 0; + req->irq_ticks = 0; + req->buffer_not_done_cnt = 0; + req->pos = 0; + + mpc52xx_lpbfifo_kick(req); + spin_unlock_irqrestore(&lpbfifo.lock, flags); + return 0; +} +EXPORT_SYMBOL(mpc52xx_lpbfifo_submit); + +void mpc52xx_lpbfifo_abort(struct mpc52xx_lpbfifo_request *req) +{ + unsigned long flags; + + spin_lock_irqsave(&lpbfifo.lock, flags); + if (lpbfifo.req == req) { + /* Put it into reset and clear the state */ + bcom_gen_bd_rx_reset(lpbfifo.bcom_rx_task); + bcom_gen_bd_tx_reset(lpbfifo.bcom_tx_task); + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + lpbfifo.req = NULL; + } + spin_unlock_irqrestore(&lpbfifo.lock, flags); +} +EXPORT_SYMBOL(mpc52xx_lpbfifo_abort); + +static int __devinit +mpc52xx_lpbfifo_probe(struct of_device *op, const struct of_device_id *match) +{ + struct resource res; + int rc = -ENOMEM; + + if (lpbfifo.dev != NULL) + return -ENOSPC; + + lpbfifo.irq = irq_of_parse_and_map(op->node, 0); + if (!lpbfifo.irq) + return -ENODEV; + + if (of_address_to_resource(op->node, 0, &res)) + return -ENODEV; + lpbfifo.regs_phys = res.start; + lpbfifo.regs = of_iomap(op->node, 0); + if (!lpbfifo.regs) + return -ENOMEM; + + spin_lock_init(&lpbfifo.lock); + + /* Put FIFO into reset */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + + /* Register the interrupt handler */ + rc = request_irq(lpbfifo.irq, mpc52xx_lpbfifo_irq, 0, + "mpc52xx-lpbfifo", &lpbfifo); + if (rc) + goto err_irq; + + /* Request the Bestcomm receive (fifo --> memory) task and IRQ */ + lpbfifo.bcom_rx_task = + bcom_gen_bd_rx_init(2, res.start + LPBFIFO_REG_FIFO_DATA, + BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC, + 16*1024*1024); + if (!lpbfifo.bcom_rx_task) + goto err_bcom_rx; + + rc = request_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), + mpc52xx_lpbfifo_bcom_irq, 0, + "mpc52xx-lpbfifo-rx", &lpbfifo); + if (rc) + goto err_bcom_rx_irq; + + /* Request the Bestcomm transmit (memory --> fifo) task and IRQ */ + lpbfifo.bcom_tx_task = + bcom_gen_bd_tx_init(2, res.start + LPBFIFO_REG_FIFO_DATA, + BCOM_INITIATOR_SCLPC, BCOM_IPR_SCLPC); + if (!lpbfifo.bcom_tx_task) + goto err_bcom_tx; + + lpbfifo.dev = &op->dev; + return 0; + + err_bcom_tx: + free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo); + err_bcom_rx_irq: + bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task); + err_bcom_rx: + err_irq: + iounmap(lpbfifo.regs); + lpbfifo.regs = NULL; + + dev_err(&op->dev, "mpc52xx_lpbfifo_probe() failed\n"); + return -ENODEV; +} + + +static int __devexit mpc52xx_lpbfifo_remove(struct of_device *op) +{ + if (lpbfifo.dev != &op->dev) + return 0; + + /* Put FIFO in reset */ + out_be32(lpbfifo.regs + LPBFIFO_REG_ENABLE, 0x01010000); + + /* Release the bestcomm transmit task */ + free_irq(bcom_get_task_irq(lpbfifo.bcom_tx_task), &lpbfifo); + bcom_gen_bd_tx_release(lpbfifo.bcom_tx_task); + + /* Release the bestcomm receive task */ + free_irq(bcom_get_task_irq(lpbfifo.bcom_rx_task), &lpbfifo); + bcom_gen_bd_rx_release(lpbfifo.bcom_rx_task); + + free_irq(lpbfifo.irq, &lpbfifo); + iounmap(lpbfifo.regs); + lpbfifo.regs = NULL; + lpbfifo.dev = NULL; + + return 0; +} + +static struct of_device_id mpc52xx_lpbfifo_match[] __devinitconst = { + { .compatible = "fsl,mpc5200-lpbfifo", }, + {}, +}; + +static struct of_platform_driver mpc52xx_lpbfifo_driver = { + .owner = THIS_MODULE, + .name = "mpc52xx-lpbfifo", + .match_table = mpc52xx_lpbfifo_match, + .probe = mpc52xx_lpbfifo_probe, + .remove = __devexit_p(mpc52xx_lpbfifo_remove), +}; + +/*********************************************************************** + * Module init/exit + */ +static int __init mpc52xx_lpbfifo_init(void) +{ + pr_debug("Registering LocalPlus bus FIFO driver\n"); + return of_register_platform_driver(&mpc52xx_lpbfifo_driver); +} +module_init(mpc52xx_lpbfifo_init); + +static void __exit mpc52xx_lpbfifo_exit(void) +{ + pr_debug("Unregistering LocalPlus bus FIFO driver\n"); + of_unregister_platform_driver(&mpc52xx_lpbfifo_driver); +} +module_exit(mpc52xx_lpbfifo_exit); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index 480f806fd0a9..4bf4bf7b063e 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -220,7 +220,7 @@ static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type) } static struct irq_chip mpc52xx_extirq_irqchip = { - .typename = "MPC52xx External", + .name = "MPC52xx External", .mask = mpc52xx_extirq_mask, .unmask = mpc52xx_extirq_unmask, .ack = mpc52xx_extirq_ack, @@ -258,7 +258,7 @@ static void mpc52xx_main_unmask(unsigned int virq) } static struct irq_chip mpc52xx_main_irqchip = { - .typename = "MPC52xx Main", + .name = "MPC52xx Main", .mask = mpc52xx_main_mask, .mask_ack = mpc52xx_main_mask, .unmask = mpc52xx_main_unmask, @@ -291,7 +291,7 @@ static void mpc52xx_periph_unmask(unsigned int virq) } static struct irq_chip mpc52xx_periph_irqchip = { - .typename = "MPC52xx Peripherals", + .name = "MPC52xx Peripherals", .mask = mpc52xx_periph_mask, .mask_ack = mpc52xx_periph_mask, .unmask = mpc52xx_periph_unmask, @@ -335,7 +335,7 @@ static void mpc52xx_sdma_ack(unsigned int virq) } static struct irq_chip mpc52xx_sdma_irqchip = { - .typename = "MPC52xx SDMA", + .name = "MPC52xx SDMA", .mask = mpc52xx_sdma_mask, .unmask = mpc52xx_sdma_unmask, .ack = mpc52xx_sdma_ack, @@ -355,7 +355,7 @@ static int mpc52xx_is_extirq(int l1, int l2) * mpc52xx_irqhost_xlate - translate virq# from device tree interrupts property */ static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c index 7ee979f323d1..9d962d7c72c1 100644 --- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c +++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c @@ -69,7 +69,6 @@ static void pq2ads_pci_unmask_irq(unsigned int virq) } static struct irq_chip pq2ads_pci_ic = { - .typename = "PQ2 ADS PCI", .name = "PQ2 ADS PCI", .end = pq2ads_pci_unmask_irq, .mask = pq2ads_pci_mask_irq, @@ -107,7 +106,7 @@ static void pq2ads_pci_irq_demux(unsigned int irq, struct irq_desc *desc) static int pci_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_data(virq, h->host_data); set_irq_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq); return 0; diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c index 567ded7c3b9b..17f99745f0e4 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -74,7 +74,7 @@ static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk, prop = of_get_property(np, "mode", NULL); if (prop && !strcmp(prop, "cpu-qe")) - pdata.qe_mode = 1; + pdata.flags = SPI_QE_CPU_MODE; for (j = 0; j < num_board_infos; j++) { if (board_infos[j].bus_num == pdata.bus_num) diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c index 08e65fc8b98c..d306f07b9aa1 100644 --- a/arch/powerpc/platforms/83xx/suspend.c +++ b/arch/powerpc/platforms/83xx/suspend.c @@ -96,6 +96,7 @@ int fsl_deep_sleep(void) { return deep_sleeping; } +EXPORT_SYMBOL(fsl_deep_sleep); static int mpc83xx_change_state(void) { diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index d3a975e8fd3e..d95121894eb7 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -1,6 +1,7 @@ -menuconfig MPC85xx - bool "Machine Type" - depends on PPC_85xx +menuconfig FSL_SOC_BOOKE + bool "Freescale Book-E Machine Type" + depends on PPC_85xx || PPC_BOOK3E + select FSL_SOC select PPC_UDBG_16550 select MPIC select PPC_PCI_CHOICE @@ -8,7 +9,7 @@ menuconfig MPC85xx select SERIAL_8250_SHARE_IRQ if SERIAL_8250 default y -if MPC85xx +if FSL_SOC_BOOKE config MPC8540_ADS bool "Freescale MPC8540 ADS" @@ -144,7 +145,19 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board -endif # MPC85xx +config P4080_DS + bool "Freescale P4080 DS" + select DEFAULT_UIMAGE + select PPC_FSL_BOOK3E + select PPC_E500MC + select PHYS_64BIT + select SWIOTLB + select MPC8xxx_GPIO + select HAS_RAPIDIO + help + This option enables support for the P4080 DS board + +endif # FSL_SOC_BOOKE config TQM85xx bool diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 9098aea0cf32..387c128f2c8c 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS) += mpc8536_ds.o obj-$(CONFIG_MPC85xx_DS) += mpc85xx_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o +obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8560) += sbc8560.o diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c new file mode 100644 index 000000000000..534c2ecc89d9 --- /dev/null +++ b/arch/powerpc/platforms/85xx/corenet_ds.c @@ -0,0 +1,125 @@ +/* + * Corenet based SoC DS Setup + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/lmb.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +void __init corenet_ds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + unsigned int flags = MPIC_PRIMARY | MPIC_BIG_ENDIAN | + MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU; + + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + if (ppc_md.get_irq == mpic_get_coreint_irq) + flags |= MPIC_ENABLE_COREINT; + + mpic = mpic_alloc(np, r.start, flags, 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + + mpic_init(mpic); +} + +#ifdef CONFIG_PCI +static int primary_phb_addr; +#endif + +/* + * Setup the architecture + */ +#ifdef CONFIG_SMP +void __init mpc85xx_smp_init(void); +#endif + +void __init corenet_ds_setup_arch(void) +{ +#ifdef CONFIG_PCI + struct device_node *np; + struct pci_controller *hose; +#endif + dma_addr_t max = 0xffffffff; + +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + +#ifdef CONFIG_PCI + for_each_compatible_node(np, "pci", "fsl,p4080-pcie") { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == primary_phb_addr) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } +#endif + +#ifdef CONFIG_SWIOTLB + if (lmb_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + } +#endif + pr_info("%s board from Freescale Semiconductor\n", ppc_md.name); +} + +static const struct of_device_id of_device_ids[] __devinitconst = { + { + .compatible = "simple-bus" + }, + { + .compatible = "fsl,rapidio-delta", + }, + {} +}; + +int __init corenet_ds_publish_devices(void) +{ + return of_platform_bus_probe(NULL, of_device_ids, NULL); +} diff --git a/arch/powerpc/platforms/85xx/corenet_ds.h b/arch/powerpc/platforms/85xx/corenet_ds.h new file mode 100644 index 000000000000..ddd700b23031 --- /dev/null +++ b/arch/powerpc/platforms/85xx/corenet_ds.h @@ -0,0 +1,19 @@ +/* + * Corenet based SoC DS Setup + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef CORENET_DS_H +#define CORENET_DS_H + +extern void __init corenet_ds_pic_init(void); +extern void __init corenet_ds_setup_arch(void); +extern int __init corenet_ds_publish_devices(void); + +#endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 3909d57b86e3..c5028a2e5a58 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -301,6 +301,7 @@ static struct of_device_id mpc85xx_ids[] = { { .compatible = "fsl,qe", }, { .compatible = "gianfar", }, { .compatible = "fsl,rapidio-delta", }, + { .compatible = "fsl,mpc8548-guts", }, {}, }; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index c8468de4acf6..088f30b0c088 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -44,6 +44,7 @@ void __init mpc85xx_rdb_pic_init(void) struct mpic *mpic; struct resource r; struct device_node *np; + unsigned long root = of_get_flat_dt_root(); np = of_find_node_by_type(NULL, "open-pic"); if (np == NULL) { @@ -57,11 +58,18 @@ void __init mpc85xx_rdb_pic_init(void) return; } - mpic = mpic_alloc(np, r.start, + if (of_flat_dt_is_compatible(root, "fsl,85XXRDB-CAMP")) { + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | + MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + 0, 256, " OpenPIC "); + } else { + mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); + } BUG_ON(mpic == NULL); of_node_put(np); @@ -113,6 +121,7 @@ static int __init mpc85xxrdb_publish_devices(void) return of_platform_bus_probe(NULL, mpc85xxrdb_ids, NULL); } machine_device_initcall(p2020_rdb, mpc85xxrdb_publish_devices); +machine_device_initcall(p1020_rdb, mpc85xxrdb_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -126,6 +135,15 @@ static int __init p2020_rdb_probe(void) return 0; } +static int __init p1020_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P1020RDB")) + return 1; + return 0; +} + define_machine(p2020_rdb) { .name = "P2020 RDB", .probe = p2020_rdb_probe, @@ -139,3 +157,17 @@ define_machine(p2020_rdb) { .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, }; + +define_machine(p1020_rdb) { + .name = "P1020 RDB", + .probe = p1020_rdb_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/p4080_ds.c b/arch/powerpc/platforms/85xx/p4080_ds.c new file mode 100644 index 000000000000..84170460497b --- /dev/null +++ b/arch/powerpc/platforms/85xx/p4080_ds.c @@ -0,0 +1,74 @@ +/* + * P4080 DS Setup + * + * Maintained by Kumar Gala (see MAINTAINERS for contact information) + * + * Copyright 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +#include "corenet_ds.h" + +#ifdef CONFIG_PCI +static int primary_phb_addr; +#endif + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init p4080_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P4080DS")) { +#ifdef CONFIG_PCI + /* treat PCIe1 as primary, + * shouldn't matter as we have no ISA on the board + */ + primary_phb_addr = 0x0000; +#endif + return 1; + } else { + return 0; + } +} + +define_machine(p4080_ds) { + .name = "P4080 DS", + .probe = p4080_ds_probe, + .setup_arch = corenet_ds_setup_arch, + .init_IRQ = corenet_ds_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_coreint_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +machine_device_initcall(p4080_ds, corenet_ds_publish_devices); +machine_arch_initcall(p4080_ds, swiotlb_setup_bus_notifier); diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c index 60edf63d0157..e5da5f62b24a 100644 --- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c +++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c @@ -232,7 +232,7 @@ static int socrates_fpga_pic_set_type(unsigned int virq, } static struct irq_chip socrates_fpga_pic_chip = { - .typename = " FPGA-PIC ", + .name = " FPGA-PIC ", .ack = socrates_fpga_pic_ack, .mask = socrates_fpga_pic_mask, .mask_ack = socrates_fpga_pic_mask_ack, @@ -245,7 +245,7 @@ static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { /* All interrupts are LEVEL sensitive */ - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &socrates_fpga_pic_chip, handle_fasteoi_irq); @@ -253,7 +253,7 @@ static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq, } static int socrates_fpga_pic_host_xlate(struct irq_host *h, - struct device_node *ct, u32 *intspec, unsigned int intsize, + struct device_node *ct, const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]]; diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 9c7b64a3402b..2bbfd530d6d8 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -35,6 +35,7 @@ config MPC8610_HPCD config GEF_PPC9A bool "GE Fanuc PPC9A" select DEFAULT_UIMAGE + select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help @@ -43,6 +44,7 @@ config GEF_PPC9A config GEF_SBC310 bool "GE Fanuc SBC310" select DEFAULT_UIMAGE + select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help @@ -51,6 +53,7 @@ config GEF_SBC310 config GEF_SBC610 bool "GE Fanuc SBC610" select DEFAULT_UIMAGE + select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAS_RAPIDIO diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c index 50d0a2b63809..0110a8736d33 100644 --- a/arch/powerpc/platforms/86xx/gef_pic.c +++ b/arch/powerpc/platforms/86xx/gef_pic.c @@ -149,7 +149,7 @@ static void gef_pic_unmask(unsigned int virq) } static struct irq_chip gef_pic_chip = { - .typename = "gefp", + .name = "gefp", .mask = gef_pic_mask, .mask_ack = gef_pic_mask_ack, .unmask = gef_pic_unmask, @@ -163,14 +163,14 @@ static int gef_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hwirq) { /* All interrupts are LEVEL sensitive */ - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &gef_pic_chip, handle_level_irq); return 0; } static int gef_pic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index 287f7bd17dd9..a792e5d85813 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -33,6 +33,7 @@ #include <asm/udbg.h> #include <asm/mpic.h> +#include <asm/nvram.h> #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> @@ -95,6 +96,10 @@ static void __init gef_ppc9a_setup_arch(void) printk(KERN_WARNING "Unable to map board registers\n"); of_node_put(regs); } + +#if defined(CONFIG_MMIO_NVRAM) + mmio_nvram_init(); +#endif } /* Return the PCB revision */ diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c index 90754e752bd8..6a1a613836c2 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc310.c +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -33,6 +33,7 @@ #include <asm/udbg.h> #include <asm/mpic.h> +#include <asm/nvram.h> #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> @@ -95,6 +96,10 @@ static void __init gef_sbc310_setup_arch(void) printk(KERN_WARNING "Unable to map board registers\n"); of_node_put(regs); } + +#if defined(CONFIG_MMIO_NVRAM) + mmio_nvram_init(); +#endif } /* Return the PCB revision */ diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 72b31a6010a0..e10688a0fc4e 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -33,6 +33,7 @@ #include <asm/udbg.h> #include <asm/mpic.h> +#include <asm/nvram.h> #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> @@ -95,6 +96,10 @@ static void __init gef_sbc610_setup_arch(void) printk(KERN_WARNING "Unable to map board registers\n"); of_node_put(regs); } + +#if defined(CONFIG_MMIO_NVRAM) + mmio_nvram_init(); +#endif } /* Return the PCB revision */ diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 627908a4cd77..5abe137f6309 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -19,6 +19,7 @@ #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/interrupt.h> #include <linux/kdev_t.h> #include <linux/delay.h> #include <linux/seq_file.h> @@ -41,10 +42,46 @@ #include "mpc86xx.h" +static struct device_node *pixis_node; static unsigned char *pixis_bdcfg0, *pixis_arch; +#ifdef CONFIG_SUSPEND +static irqreturn_t mpc8610_sw9_irq(int irq, void *data) +{ + pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__); + return IRQ_HANDLED; +} + +static void __init mpc8610_suspend_init(void) +{ + int irq; + int ret; + + if (!pixis_node) + return; + + irq = irq_of_parse_and_map(pixis_node, 0); + if (!irq) { + pr_err("%s: can't map pixis event IRQ.\n", __func__); + return; + } + + ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9/wakeup", NULL); + if (ret) { + pr_err("%s: can't request pixis event IRQ: %d\n", + __func__, ret); + irq_dispose_mapping(irq); + } + + enable_irq_wake(irq); +} +#else +static inline void mpc8610_suspend_init(void) { } +#endif /* CONFIG_SUSPEND */ + static struct of_device_id __initdata mpc8610_ids[] = { { .compatible = "fsl,mpc8610-immr", }, + { .compatible = "fsl,mpc8610-guts", }, { .compatible = "simple-bus", }, { .compatible = "gianfar", }, {} @@ -55,6 +92,9 @@ static int __init mpc8610_declare_of_platform_devices(void) /* Firstly, register PIXIS GPIOs. */ simple_gpiochip_init("fsl,fpga-pixis-gpio-bank"); + /* Enable wakeup on PIXIS' event IRQ. */ + mpc8610_suspend_init(); + /* Without this call, the SSI device driver won't get probed. */ of_platform_bus_probe(NULL, mpc8610_ids, NULL); @@ -250,10 +290,10 @@ static void __init mpc86xx_hpcd_setup_arch(void) diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port; #endif - np = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis"); - if (np) { - of_address_to_resource(np, 0, &r); - of_node_put(np); + pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis"); + if (pixis_node) { + of_address_to_resource(pixis_node, 0, &r); + of_node_put(pixis_node); pixis = ioremap(r.start, 32); if (!pixis) { printk(KERN_ERR "Err: can't map FPGA cfg register!\n"); diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index 385acfc48397..242954c4293f 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -222,7 +222,7 @@ static void cpm_cascade(unsigned int irq, struct irq_desc *desc) int cascade_irq; if ((cascade_irq = cpm_get_irq()) >= 0) { - struct irq_desc *cdesc = irq_desc + cascade_irq; + struct irq_desc *cdesc = irq_to_desc(cascade_irq); generic_handle_irq(cascade_irq); cdesc->chip->eoi(cascade_irq); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 04a8061045c4..d1663db7810f 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -86,6 +86,11 @@ config RTAS_ERROR_LOGGING depends on PPC_RTAS default n +config PPC_RTAS_DAEMON + bool + depends on PPC_RTAS + default n + config RTAS_PROC bool "Proc interface to RTAS" depends on PPC_RTAS @@ -255,7 +260,7 @@ config QE_GPIO config CPM2 bool "Enable support for the CPM2 (Communications Processor Module)" - depends on MPC85xx || 8260 + depends on (FSL_SOC_BOOKE && PPC32) || 8260 select CPM select PPC_LIB_RHEAP select PPC_PCI_CHOICE @@ -300,7 +305,7 @@ source "arch/powerpc/sysdev/bestcomm/Kconfig" config MPC8xxx_GPIO bool "MPC8xxx GPIO support" - depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || PPC_85xx || PPC_86xx + depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index e382cae678b8..2eab27a94cc9 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -28,8 +28,6 @@ config PPC_BOOK3S_32 config PPC_85xx bool "Freescale 85xx" select E500 - select FSL_SOC - select MPC85xx config PPC_8xx bool "Freescale 8xx" @@ -138,6 +136,14 @@ config PPC_FPU bool default y if PPC64 +config FSL_EMB_PERFMON + bool "Freescale Embedded Perfmon" + depends on E500 || PPC_83xx + help + This is the Performance Monitor support found on the e500 core + and some e300 cores (c3 and c4). Select this only if your + core supports the Embedded Performance Monitor APU + config 4xx bool depends on 40x || 44x @@ -153,13 +159,6 @@ config FSL_BOOKE depends on E200 || E500 default y -config FSL_EMB_PERFMON - bool "Freescale Embedded Perfmon" - depends on E500 || PPC_83xx - help - This is the Performance Monitor support found on the e500 core - and some e300 cores (c3 and c4). Select this only if your - core supports the Embedded Performance Monitor APU config PTE_64BIT bool diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index a6812ee00100..fdb9f0b0d7a8 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_PPC_MPC52xx) += 52xx/ obj-$(CONFIG_PPC_8xx) += 8xx/ obj-$(CONFIG_PPC_82xx) += 82xx/ obj-$(CONFIG_PPC_83xx) += 83xx/ -obj-$(CONFIG_PPC_85xx) += 85xx/ +obj-$(CONFIG_FSL_SOC_BOOKE) += 85xx/ obj-$(CONFIG_PPC_86xx) += 86xx/ obj-$(CONFIG_PPC_PSERIES) += pseries/ obj-$(CONFIG_PPC_ISERIES) += iseries/ diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index a86c34b3bb84..96fe896f6df3 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -312,7 +312,7 @@ static struct irq_chip msic_irq_chip = { .mask = mask_msi_irq, .unmask = unmask_msi_irq, .shutdown = unmask_msi_irq, - .typename = "AXON-MSI", + .name = "AXON-MSI", }; static int msic_host_map(struct irq_host *h, unsigned int virq, diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c index 72254848a228..36052a9ebcda 100644 --- a/arch/powerpc/platforms/cell/beat_interrupt.c +++ b/arch/powerpc/platforms/cell/beat_interrupt.c @@ -110,7 +110,7 @@ static void beatic_end_irq(unsigned int irq_plug) } static struct irq_chip beatic_pic = { - .typename = " CELL-BEAT ", + .name = " CELL-BEAT ", .unmask = beatic_unmask_irq, .mask = beatic_mask_irq, .eoi = beatic_end_irq, @@ -136,7 +136,7 @@ static void beatic_pic_host_unmap(struct irq_host *h, unsigned int virq) static int beatic_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); int64_t err; err = beat_construct_and_connect_irq_plug(virq, hw); @@ -166,11 +166,11 @@ static void beatic_pic_host_remap(struct irq_host *h, unsigned int virq, * Note: We have only 1 entry to translate. */ static int beatic_pic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { - u64 *intspec2 = (u64 *)intspec; + const u64 *intspec2 = (const u64 *)intspec; *out_hwirq = *intspec2; *out_flags |= IRQ_TYPE_LEVEL_LOW; diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 882e47080e74..7267effc8078 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -54,7 +54,7 @@ struct iic { struct device_node *node; }; -static DEFINE_PER_CPU(struct iic, iic); +static DEFINE_PER_CPU(struct iic, cpu_iic); #define IIC_NODE_COUNT 2 static struct irq_host *iic_host; @@ -82,13 +82,13 @@ static void iic_unmask(unsigned int irq) static void iic_eoi(unsigned int irq) { - struct iic *iic = &__get_cpu_var(iic); + struct iic *iic = &__get_cpu_var(cpu_iic); out_be64(&iic->regs->prio, iic->eoi_stack[--iic->eoi_ptr]); BUG_ON(iic->eoi_ptr < 0); } static struct irq_chip iic_chip = { - .typename = " CELL-IIC ", + .name = " CELL-IIC ", .mask = iic_mask, .unmask = iic_unmask, .eoi = iic_eoi, @@ -133,7 +133,7 @@ static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc) static struct irq_chip iic_ioexc_chip = { - .typename = " CELL-IOEX", + .name = " CELL-IOEX", .mask = iic_mask, .unmask = iic_unmask, .eoi = iic_ioexc_eoi, @@ -146,7 +146,7 @@ static unsigned int iic_get_irq(void) struct iic *iic; unsigned int virq; - iic = &__get_cpu_var(iic); + iic = &__get_cpu_var(cpu_iic); *(unsigned long *) &pending = in_be64((u64 __iomem *) &iic->regs->pending_destr); if (!(pending.flags & CBE_IIC_IRQ_VALID)) @@ -161,12 +161,12 @@ static unsigned int iic_get_irq(void) void iic_setup_cpu(void) { - out_be64(&__get_cpu_var(iic).regs->prio, 0xff); + out_be64(&__get_cpu_var(cpu_iic).regs->prio, 0xff); } u8 iic_get_target_id(int cpu) { - return per_cpu(iic, cpu).target_id; + return per_cpu(cpu_iic, cpu).target_id; } EXPORT_SYMBOL_GPL(iic_get_target_id); @@ -181,7 +181,7 @@ static inline int iic_ipi_to_irq(int ipi) void iic_cause_IPI(int cpu, int mesg) { - out_be64(&per_cpu(iic, cpu).regs->generate, (0xf - mesg) << 4); + out_be64(&per_cpu(cpu_iic, cpu).regs->generate, (0xf - mesg) << 4); } struct irq_host *iic_get_irq_host(int node) @@ -297,7 +297,7 @@ static int iic_host_map(struct irq_host *h, unsigned int virq, } static int iic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { @@ -348,7 +348,7 @@ static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr, /* XXX FIXME: should locate the linux CPU number from the HW cpu * number properly. We are lucky for now */ - struct iic *iic = &per_cpu(iic, hw_cpu); + struct iic *iic = &per_cpu(cpu_iic, hw_cpu); iic->regs = ioremap(addr, sizeof(struct cbe_iic_thread_regs)); BUG_ON(iic->regs == NULL); diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 4e5655624ae8..01244f254a11 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -102,7 +102,7 @@ static void spider_ack_irq(unsigned int virq) /* Reset edge detection logic if necessary */ - if (get_irq_desc(virq)->status & IRQ_LEVEL) + if (irq_to_desc(virq)->status & IRQ_LEVEL) return; /* Only interrupts 47 to 50 can be set to edge */ @@ -119,7 +119,7 @@ static int spider_set_irq_type(unsigned int virq, unsigned int type) struct spider_pic *pic = spider_virq_to_pic(virq); unsigned int hw = irq_map[virq].hwirq; void __iomem *cfg = spider_get_irq_config(pic, hw); - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); u32 old_mask; u32 ic; @@ -168,7 +168,7 @@ static int spider_set_irq_type(unsigned int virq, unsigned int type) } static struct irq_chip spider_pic = { - .typename = " SPIDER ", + .name = " SPIDER ", .unmask = spider_unmask_irq, .mask = spider_mask_irq, .ack = spider_ack_irq, @@ -187,7 +187,7 @@ static int spider_host_map(struct irq_host *h, unsigned int virq, } static int spider_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 884e8bcec499..64a4c2d85f7c 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -2494,7 +2494,7 @@ static ssize_t spufs_switch_log_read(struct file *file, char __user *buf, struct spu_context *ctx = SPUFS_I(inode)->i_ctx; int error = 0, cnt = 0; - if (!buf || len < 0) + if (!buf) return -EINVAL; error = spu_acquire(ctx); diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig index 37d438bd5b7a..bc0b0efdc5fe 100644 --- a/arch/powerpc/platforms/chrp/Kconfig +++ b/arch/powerpc/platforms/chrp/Kconfig @@ -5,6 +5,8 @@ config PPC_CHRP select PPC_I8259 select PPC_INDIRECT_PCI select PPC_RTAS + select PPC_RTAS_DAEMON + select RTAS_ERROR_LOGGING select PPC_MPC106 select PPC_UDBG_16550 select PPC_NATIVE diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index cd4ad9aea760..52f3df3b4ca0 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -364,19 +364,6 @@ void __init chrp_setup_arch(void) if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); } -void -chrp_event_scan(unsigned long unused) -{ - unsigned char log[1024]; - int ret = 0; - - /* XXX: we should loop until the hardware says no more error logs -- Cort */ - rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, - __pa(log), 1024); - mod_timer(&__get_cpu_var(heartbeat_timer), - jiffies + event_scan_interval); -} - static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc) { unsigned int cascade_irq = i8259_irq(); @@ -568,9 +555,6 @@ void __init chrp_init_IRQ(void) void __init chrp_init2(void) { - struct device_node *device; - const unsigned int *p = NULL; - #ifdef CONFIG_NVRAM chrp_nvram_init(); #endif @@ -582,40 +566,6 @@ chrp_init2(void) request_region(0x80,0x10,"dma page reg"); request_region(0xc0,0x20,"dma2"); - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - device = of_find_node_by_name(NULL, "rtas"); - if (device) - p = of_get_property(device, "rtas-event-scan-rate", NULL); - if (p && *p) { - /* - * Arrange to call chrp_event_scan at least *p times - * per minute. We use 59 rather than 60 here so that - * the rate will be slightly higher than the minimum. - * This all assumes we don't do hotplug CPU on any - * machine that needs the event scans done. - */ - unsigned long interval, offset; - int cpu, ncpus; - struct timer_list *timer; - - interval = HZ * 59 / *p; - offset = HZ; - ncpus = num_online_cpus(); - event_scan_interval = ncpus * interval; - for (cpu = 0; cpu < ncpus; ++cpu) { - timer = &per_cpu(heartbeat_timer, cpu); - setup_timer(timer, chrp_event_scan, 0); - timer->expires = jiffies + offset; - add_timer_on(timer, cpu); - offset += interval; - } - printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", - *p, interval); - } - of_node_put(device); - if (ppc_md.progress) ppc_md.progress(" Have fun! ", 0x7777); } diff --git a/arch/powerpc/platforms/iseries/htab.c b/arch/powerpc/platforms/iseries/htab.c index f99c6c4b6985..3ae66ab9d5e7 100644 --- a/arch/powerpc/platforms/iseries/htab.c +++ b/arch/powerpc/platforms/iseries/htab.c @@ -19,8 +19,7 @@ #include "call_hpt.h" -static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp = - { [0 ... 63] = SPIN_LOCK_UNLOCKED}; +static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp; /* * Very primitive algorithm for picking up a lock @@ -245,6 +244,11 @@ static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va, void __init hpte_init_iSeries(void) { + int i; + + for (i = 0; i < ARRAY_SIZE(iSeries_hlocks); i++) + spin_lock_init(&iSeries_hlocks[i]); + ppc_md.hpte_invalidate = iSeries_hpte_invalidate; ppc_md.hpte_updatepp = iSeries_hpte_updatepp; ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp; diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 94f444758836..07762259c60a 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -214,7 +214,7 @@ void __init iSeries_activate_IRQs() unsigned long flags; for_each_irq (irq) { - struct irq_desc *desc = get_irq_desc(irq); + struct irq_desc *desc = irq_to_desc(irq); if (desc && desc->chip && desc->chip->startup) { spin_lock_irqsave(&desc->lock, flags); @@ -273,7 +273,7 @@ static void iseries_end_IRQ(unsigned int irq) } static struct irq_chip iseries_pic = { - .typename = "iSeries irq controller", + .name = "iSeries irq controller", .startup = iseries_startup_IRQ, .shutdown = iseries_shutdown_IRQ, .unmask = iseries_enable_IRQ, diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index d212006a5b3c..09e827296276 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -152,12 +152,12 @@ static unsigned int pmac_startup_irq(unsigned int virq) unsigned long bit = 1UL << (src & 0x1f); int i = src >> 5; - spin_lock_irqsave(&pmac_pic_lock, flags); - if ((irq_desc[virq].status & IRQ_LEVEL) == 0) + spin_lock_irqsave(&pmac_pic_lock, flags); + if ((irq_to_desc(virq)->status & IRQ_LEVEL) == 0) out_le32(&pmac_irq_hw[i]->ack, bit); __set_bit(src, ppc_cached_irq_mask); __pmac_set_irq_mask(src, 0); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + spin_unlock_irqrestore(&pmac_pic_lock, flags); return 0; } @@ -195,7 +195,7 @@ static int pmac_retrigger(unsigned int virq) } static struct irq_chip pmac_pic = { - .typename = " PMAC-PIC ", + .name = " PMAC-PIC ", .startup = pmac_startup_irq, .mask = pmac_mask_irq, .ack = pmac_ack_irq, @@ -285,7 +285,7 @@ static int pmac_pic_host_match(struct irq_host *h, struct device_node *node) static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); int level; if (hw >= max_irqs) @@ -303,7 +303,7 @@ static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, } static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c index 8ec5ccf76b19..59d9712d7364 100644 --- a/arch/powerpc/platforms/ps3/interrupt.c +++ b/arch/powerpc/platforms/ps3/interrupt.c @@ -152,7 +152,7 @@ static void ps3_chip_eoi(unsigned int virq) */ static struct irq_chip ps3_irq_chip = { - .typename = "ps3", + .name = "ps3", .mask = ps3_chip_mask, .unmask = ps3_chip_unmask, .eoi = ps3_chip_eoi, diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 189a25b80735..e81b028a2a48 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -34,7 +34,7 @@ #if defined(DEBUG) #define DBG udbg_printf #else -#define DBG pr_debug +#define DBG pr_devel #endif enum { diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index f0e6f28427bd..27554c807fd5 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -4,6 +4,7 @@ config PPC_PSERIES select MPIC select PPC_I8259 select PPC_RTAS + select PPC_RTAS_DAEMON select RTAS_ERROR_LOGGING select PPC_UDBG_16550 select PPC_NATIVE @@ -59,7 +60,7 @@ config PPC_SMLPAR config CMM tristate "Collaborative memory management" - depends on PPC_SMLPAR && !CRASH_DUMP + depends on PPC_SMLPAR default y help Select this option, if you want to enable the kernel interface diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 790c0b872d4f..0ff5174ae4f5 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -7,8 +7,8 @@ EXTRA_CFLAGS += -DDEBUG endif obj-y := lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o ras.o rtasd.o \ - firmware.o power.o + setup.o iommu.o ras.o \ + firmware.o power.o dlpar.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c index 6567439fe78d..bcdcf0ccc8d7 100644 --- a/arch/powerpc/platforms/pseries/cmm.c +++ b/arch/powerpc/platforms/pseries/cmm.c @@ -229,8 +229,9 @@ static void cmm_get_mpp(void) { int rc; struct hvcall_mpp_data mpp_data; - unsigned long active_pages_target; - signed long page_loan_request; + signed long active_pages_target, page_loan_request, target; + signed long total_pages = totalram_pages + loaned_pages; + signed long min_mem_pages = (min_mem_mb * 1024 * 1024) / PAGE_SIZE; rc = h_get_mpp(&mpp_data); @@ -238,17 +239,25 @@ static void cmm_get_mpp(void) return; page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE); - loaned_pages_target = page_loan_request + loaned_pages; - if (loaned_pages_target > oom_freed_pages) - loaned_pages_target -= oom_freed_pages; + target = page_loan_request + (signed long)loaned_pages; + + if (target < 0 || total_pages < min_mem_pages) + target = 0; + + if (target > oom_freed_pages) + target -= oom_freed_pages; else - loaned_pages_target = 0; + target = 0; + + active_pages_target = total_pages - target; + + if (min_mem_pages > active_pages_target) + target = total_pages - min_mem_pages; - active_pages_target = totalram_pages + loaned_pages - loaned_pages_target; + if (target < 0) + target = 0; - if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE)) - loaned_pages_target = totalram_pages + loaned_pages - - ((min_mem_mb * 1024 * 1024) / PAGE_SIZE); + loaned_pages_target = target; cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n", page_loan_request, loaned_pages, loaned_pages_target, diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c new file mode 100644 index 000000000000..12df9e8812a9 --- /dev/null +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -0,0 +1,558 @@ +/* + * Support for dynamic reconfiguration for PCI, Memory, and CPU + * Hotplug and Dynamic Logical Partitioning on RPA platforms. + * + * Copyright (C) 2009 Nathan Fontenot + * Copyright (C) 2009 IBM Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/kref.h> +#include <linux/notifier.h> +#include <linux/proc_fs.h> +#include <linux/spinlock.h> +#include <linux/cpu.h> +#include "offline_states.h" + +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/uaccess.h> +#include <asm/rtas.h> +#include <asm/pSeries_reconfig.h> + +struct cc_workarea { + u32 drc_index; + u32 zero; + u32 name_offset; + u32 prop_length; + u32 prop_offset; +}; + +static void dlpar_free_cc_property(struct property *prop) +{ + kfree(prop->name); + kfree(prop->value); + kfree(prop); +} + +static struct property *dlpar_parse_cc_property(struct cc_workarea *ccwa) +{ + struct property *prop; + char *name; + char *value; + + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + if (!prop) + return NULL; + + name = (char *)ccwa + ccwa->name_offset; + prop->name = kstrdup(name, GFP_KERNEL); + + prop->length = ccwa->prop_length; + value = (char *)ccwa + ccwa->prop_offset; + prop->value = kzalloc(prop->length, GFP_KERNEL); + if (!prop->value) { + dlpar_free_cc_property(prop); + return NULL; + } + + memcpy(prop->value, value, prop->length); + return prop; +} + +static struct device_node *dlpar_parse_cc_node(struct cc_workarea *ccwa) +{ + struct device_node *dn; + char *name; + + dn = kzalloc(sizeof(*dn), GFP_KERNEL); + if (!dn) + return NULL; + + /* The configure connector reported name does not contain a + * preceeding '/', so we allocate a buffer large enough to + * prepend this to the full_name. + */ + name = (char *)ccwa + ccwa->name_offset; + dn->full_name = kmalloc(strlen(name) + 2, GFP_KERNEL); + if (!dn->full_name) { + kfree(dn); + return NULL; + } + + sprintf(dn->full_name, "/%s", name); + return dn; +} + +static void dlpar_free_one_cc_node(struct device_node *dn) +{ + struct property *prop; + + while (dn->properties) { + prop = dn->properties; + dn->properties = prop->next; + dlpar_free_cc_property(prop); + } + + kfree(dn->full_name); + kfree(dn); +} + +static void dlpar_free_cc_nodes(struct device_node *dn) +{ + if (dn->child) + dlpar_free_cc_nodes(dn->child); + + if (dn->sibling) + dlpar_free_cc_nodes(dn->sibling); + + dlpar_free_one_cc_node(dn); +} + +#define NEXT_SIBLING 1 +#define NEXT_CHILD 2 +#define NEXT_PROPERTY 3 +#define PREV_PARENT 4 +#define MORE_MEMORY 5 +#define CALL_AGAIN -2 +#define ERR_CFG_USE -9003 + +struct device_node *dlpar_configure_connector(u32 drc_index) +{ + struct device_node *dn; + struct device_node *first_dn = NULL; + struct device_node *last_dn = NULL; + struct property *property; + struct property *last_property = NULL; + struct cc_workarea *ccwa; + int cc_token; + int rc; + + cc_token = rtas_token("ibm,configure-connector"); + if (cc_token == RTAS_UNKNOWN_SERVICE) + return NULL; + + spin_lock(&rtas_data_buf_lock); + ccwa = (struct cc_workarea *)&rtas_data_buf[0]; + ccwa->drc_index = drc_index; + ccwa->zero = 0; + + rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL); + while (rc) { + switch (rc) { + case NEXT_SIBLING: + dn = dlpar_parse_cc_node(ccwa); + if (!dn) + goto cc_error; + + dn->parent = last_dn->parent; + last_dn->sibling = dn; + last_dn = dn; + break; + + case NEXT_CHILD: + dn = dlpar_parse_cc_node(ccwa); + if (!dn) + goto cc_error; + + if (!first_dn) + first_dn = dn; + else { + dn->parent = last_dn; + if (last_dn) + last_dn->child = dn; + } + + last_dn = dn; + break; + + case NEXT_PROPERTY: + property = dlpar_parse_cc_property(ccwa); + if (!property) + goto cc_error; + + if (!last_dn->properties) + last_dn->properties = property; + else + last_property->next = property; + + last_property = property; + break; + + case PREV_PARENT: + last_dn = last_dn->parent; + break; + + case CALL_AGAIN: + break; + + case MORE_MEMORY: + case ERR_CFG_USE: + default: + printk(KERN_ERR "Unexpected Error (%d) " + "returned from configure-connector\n", rc); + goto cc_error; + } + + rc = rtas_call(cc_token, 2, 1, NULL, rtas_data_buf, NULL); + } + + spin_unlock(&rtas_data_buf_lock); + return first_dn; + +cc_error: + if (first_dn) + dlpar_free_cc_nodes(first_dn); + spin_unlock(&rtas_data_buf_lock); + return NULL; +} + +static struct device_node *derive_parent(const char *path) +{ + struct device_node *parent; + char *last_slash; + + last_slash = strrchr(path, '/'); + if (last_slash == path) { + parent = of_find_node_by_path("/"); + } else { + char *parent_path; + int parent_path_len = last_slash - path + 1; + parent_path = kmalloc(parent_path_len, GFP_KERNEL); + if (!parent_path) + return NULL; + + strlcpy(parent_path, path, parent_path_len); + parent = of_find_node_by_path(parent_path); + kfree(parent_path); + } + + return parent; +} + +int dlpar_attach_node(struct device_node *dn) +{ + struct proc_dir_entry *ent; + int rc; + + of_node_set_flag(dn, OF_DYNAMIC); + kref_init(&dn->kref); + dn->parent = derive_parent(dn->full_name); + if (!dn->parent) + return -ENOMEM; + + rc = blocking_notifier_call_chain(&pSeries_reconfig_chain, + PSERIES_RECONFIG_ADD, dn); + if (rc == NOTIFY_BAD) { + printk(KERN_ERR "Failed to add device node %s\n", + dn->full_name); + return -ENOMEM; /* For now, safe to assume kmalloc failure */ + } + + of_attach_node(dn); + +#ifdef CONFIG_PROC_DEVICETREE + ent = proc_mkdir(strrchr(dn->full_name, '/') + 1, dn->parent->pde); + if (ent) + proc_device_tree_add_node(dn, ent); +#endif + + of_node_put(dn->parent); + return 0; +} + +int dlpar_detach_node(struct device_node *dn) +{ + struct device_node *parent = dn->parent; + struct property *prop = dn->properties; + +#ifdef CONFIG_PROC_DEVICETREE + while (prop) { + remove_proc_entry(prop->name, dn->pde); + prop = prop->next; + } + + if (dn->pde) + remove_proc_entry(dn->pde->name, parent->pde); +#endif + + blocking_notifier_call_chain(&pSeries_reconfig_chain, + PSERIES_RECONFIG_REMOVE, dn); + of_detach_node(dn); + of_node_put(dn); /* Must decrement the refcount */ + + return 0; +} + +#define DR_ENTITY_SENSE 9003 +#define DR_ENTITY_PRESENT 1 +#define DR_ENTITY_UNUSABLE 2 +#define ALLOCATION_STATE 9003 +#define ALLOC_UNUSABLE 0 +#define ALLOC_USABLE 1 +#define ISOLATION_STATE 9001 +#define ISOLATE 0 +#define UNISOLATE 1 + +int dlpar_acquire_drc(u32 drc_index) +{ + int dr_status, rc; + + rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status, + DR_ENTITY_SENSE, drc_index); + if (rc || dr_status != DR_ENTITY_UNUSABLE) + return -1; + + rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_USABLE); + if (rc) + return rc; + + rc = rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE); + if (rc) { + rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE); + return rc; + } + + return 0; +} + +int dlpar_release_drc(u32 drc_index) +{ + int dr_status, rc; + + rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status, + DR_ENTITY_SENSE, drc_index); + if (rc || dr_status != DR_ENTITY_PRESENT) + return -1; + + rc = rtas_set_indicator(ISOLATION_STATE, drc_index, ISOLATE); + if (rc) + return rc; + + rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_UNUSABLE); + if (rc) { + rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE); + return rc; + } + + return 0; +} + +#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE + +static DEFINE_MUTEX(pseries_cpu_hotplug_mutex); + +void cpu_hotplug_driver_lock() +{ + mutex_lock(&pseries_cpu_hotplug_mutex); +} + +void cpu_hotplug_driver_unlock() +{ + mutex_unlock(&pseries_cpu_hotplug_mutex); +} + +static int dlpar_online_cpu(struct device_node *dn) +{ + int rc = 0; + unsigned int cpu; + int len, nthreads, i; + const u32 *intserv; + + intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return -EINVAL; + + nthreads = len / sizeof(u32); + + cpu_maps_update_begin(); + for (i = 0; i < nthreads; i++) { + for_each_present_cpu(cpu) { + if (get_hard_smp_processor_id(cpu) != intserv[i]) + continue; + BUG_ON(get_cpu_current_state(cpu) + != CPU_STATE_OFFLINE); + cpu_maps_update_done(); + rc = cpu_up(cpu); + if (rc) + goto out; + cpu_maps_update_begin(); + + break; + } + if (cpu == num_possible_cpus()) + printk(KERN_WARNING "Could not find cpu to online " + "with physical id 0x%x\n", intserv[i]); + } + cpu_maps_update_done(); + +out: + return rc; + +} + +static ssize_t dlpar_cpu_probe(const char *buf, size_t count) +{ + struct device_node *dn; + unsigned long drc_index; + char *cpu_name; + int rc; + + cpu_hotplug_driver_lock(); + rc = strict_strtoul(buf, 0, &drc_index); + if (rc) { + rc = -EINVAL; + goto out; + } + + dn = dlpar_configure_connector(drc_index); + if (!dn) { + rc = -EINVAL; + goto out; + } + + /* configure-connector reports cpus as living in the base + * directory of the device tree. CPUs actually live in the + * cpus directory so we need to fixup the full_name. + */ + cpu_name = kzalloc(strlen(dn->full_name) + strlen("/cpus") + 1, + GFP_KERNEL); + if (!cpu_name) { + dlpar_free_cc_nodes(dn); + rc = -ENOMEM; + goto out; + } + + sprintf(cpu_name, "/cpus%s", dn->full_name); + kfree(dn->full_name); + dn->full_name = cpu_name; + + rc = dlpar_acquire_drc(drc_index); + if (rc) { + dlpar_free_cc_nodes(dn); + rc = -EINVAL; + goto out; + } + + rc = dlpar_attach_node(dn); + if (rc) { + dlpar_release_drc(drc_index); + dlpar_free_cc_nodes(dn); + } + + rc = dlpar_online_cpu(dn); +out: + cpu_hotplug_driver_unlock(); + + return rc ? rc : count; +} + +static int dlpar_offline_cpu(struct device_node *dn) +{ + int rc = 0; + unsigned int cpu; + int len, nthreads, i; + const u32 *intserv; + + intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); + if (!intserv) + return -EINVAL; + + nthreads = len / sizeof(u32); + + cpu_maps_update_begin(); + for (i = 0; i < nthreads; i++) { + for_each_present_cpu(cpu) { + if (get_hard_smp_processor_id(cpu) != intserv[i]) + continue; + + if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE) + break; + + if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) { + cpu_maps_update_done(); + rc = cpu_down(cpu); + if (rc) + goto out; + cpu_maps_update_begin(); + break; + + } + + /* + * The cpu is in CPU_STATE_INACTIVE. + * Upgrade it's state to CPU_STATE_OFFLINE. + */ + set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); + BUG_ON(plpar_hcall_norets(H_PROD, intserv[i]) + != H_SUCCESS); + __cpu_die(cpu); + break; + } + if (cpu == num_possible_cpus()) + printk(KERN_WARNING "Could not find cpu to offline " + "with physical id 0x%x\n", intserv[i]); + } + cpu_maps_update_done(); + +out: + return rc; + +} + +static ssize_t dlpar_cpu_release(const char *buf, size_t count) +{ + struct device_node *dn; + const u32 *drc_index; + int rc; + + dn = of_find_node_by_path(buf); + if (!dn) + return -EINVAL; + + drc_index = of_get_property(dn, "ibm,my-drc-index", NULL); + if (!drc_index) { + of_node_put(dn); + return -EINVAL; + } + + cpu_hotplug_driver_lock(); + rc = dlpar_offline_cpu(dn); + if (rc) { + of_node_put(dn); + rc = -EINVAL; + goto out; + } + + rc = dlpar_release_drc(*drc_index); + if (rc) { + of_node_put(dn); + goto out; + } + + rc = dlpar_detach_node(dn); + if (rc) { + dlpar_acquire_drc(*drc_index); + goto out; + } + + of_node_put(dn); +out: + cpu_hotplug_driver_unlock(); + return rc ? rc : count; +} + +static int __init pseries_dlpar_init(void) +{ + ppc_md.cpu_probe = dlpar_cpu_probe; + ppc_md.cpu_release = dlpar_cpu_release; + + return 0; +} +machine_device_initcall(pseries, pseries_dlpar_init); + +#endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c index 937a544a236d..c5f3116b6ca5 100644 --- a/arch/powerpc/platforms/pseries/dtl.c +++ b/arch/powerpc/platforms/pseries/dtl.c @@ -54,7 +54,7 @@ struct dtl { int buf_entries; u64 last_idx; }; -static DEFINE_PER_CPU(struct dtl, dtl); +static DEFINE_PER_CPU(struct dtl, cpu_dtl); /* * Dispatch trace log event mask: @@ -261,7 +261,7 @@ static int dtl_init(void) /* set up the per-cpu log structures */ for_each_possible_cpu(i) { - struct dtl *dtl = &per_cpu(dtl, i); + struct dtl *dtl = &per_cpu(cpu_dtl, i); dtl->cpu = i; rc = dtl_setup_file(dtl); diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 0e8db6771252..ef8e45448480 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -63,22 +63,6 @@ static void print_device_node_tree(struct pci_dn *pdn, int dent) } #endif -/** - * irq_in_use - return true if this irq is being used - */ -static int irq_in_use(unsigned int irq) -{ - int rc = 0; - unsigned long flags; - struct irq_desc *desc = irq_desc + irq; - - spin_lock_irqsave(&desc->lock, flags); - if (desc->action) - rc = 1; - spin_unlock_irqrestore(&desc->lock, flags); - return rc; -} - /** * eeh_disable_irq - disable interrupt for the recovering device */ @@ -93,7 +77,7 @@ static void eeh_disable_irq(struct pci_dev *dev) if (dev->msi_enabled || dev->msix_enabled) return; - if (!irq_in_use(dev->irq)) + if (!irq_has_action(dev->irq)) return; PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index ebff6d9a4e39..6ea4698d9176 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -30,6 +30,7 @@ #include <asm/pSeries_reconfig.h> #include "xics.h" #include "plpar_wrappers.h" +#include "offline_states.h" /* This version can't take the spinlock, because it never returns */ static struct rtas_args rtas_stop_self_args = { @@ -39,6 +40,55 @@ static struct rtas_args rtas_stop_self_args = { .rets = &rtas_stop_self_args.args[0], }; +static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) = + CPU_STATE_OFFLINE; +static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE; + +static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE; + +static int cede_offline_enabled __read_mostly = 1; + +/* + * Enable/disable cede_offline when available. + */ +static int __init setup_cede_offline(char *str) +{ + if (!strcmp(str, "off")) + cede_offline_enabled = 0; + else if (!strcmp(str, "on")) + cede_offline_enabled = 1; + else + return 0; + return 1; +} + +__setup("cede_offline=", setup_cede_offline); + +enum cpu_state_vals get_cpu_current_state(int cpu) +{ + return per_cpu(current_state, cpu); +} + +void set_cpu_current_state(int cpu, enum cpu_state_vals state) +{ + per_cpu(current_state, cpu) = state; +} + +enum cpu_state_vals get_preferred_offline_state(int cpu) +{ + return per_cpu(preferred_offline_state, cpu); +} + +void set_preferred_offline_state(int cpu, enum cpu_state_vals state) +{ + per_cpu(preferred_offline_state, cpu) = state; +} + +void set_default_offline_state(int cpu) +{ + per_cpu(preferred_offline_state, cpu) = default_offline_state; +} + static void rtas_stop_self(void) { struct rtas_args *args = &rtas_stop_self_args; @@ -56,11 +106,61 @@ static void rtas_stop_self(void) static void pseries_mach_cpu_die(void) { + unsigned int cpu = smp_processor_id(); + unsigned int hwcpu = hard_smp_processor_id(); + u8 cede_latency_hint = 0; + local_irq_disable(); idle_task_exit(); xics_teardown_cpu(); - unregister_slb_shadow(hard_smp_processor_id(), __pa(get_slb_shadow())); - rtas_stop_self(); + + if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + set_cpu_current_state(cpu, CPU_STATE_INACTIVE); + cede_latency_hint = 2; + + get_lppaca()->idle = 1; + if (!get_lppaca()->shared_proc) + get_lppaca()->donate_dedicated_cpu = 1; + + printk(KERN_INFO + "cpu %u (hwid %u) ceding for offline with hint %d\n", + cpu, hwcpu, cede_latency_hint); + while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + extended_cede_processor(cede_latency_hint); + printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n", + cpu, hwcpu); + printk(KERN_INFO + "Decrementer value = %x Timebase value = %llx\n", + get_dec(), get_tb()); + } + + printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n", + cpu, hwcpu); + + if (!get_lppaca()->shared_proc) + get_lppaca()->donate_dedicated_cpu = 0; + get_lppaca()->idle = 0; + } + + if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { + unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); + + /* + * NOTE: Calling start_secondary() here for now to + * start new context. + * However, need to do it cleanly by resetting the + * stack pointer. + */ + start_secondary(); + + } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) { + + set_cpu_current_state(cpu, CPU_STATE_OFFLINE); + unregister_slb_shadow(hard_smp_processor_id(), + __pa(get_slb_shadow())); + rtas_stop_self(); + } + /* Should never get here... */ BUG(); for(;;); @@ -106,18 +206,43 @@ static int pseries_cpu_disable(void) return 0; } +/* + * pseries_cpu_die: Wait for the cpu to die. + * @cpu: logical processor id of the CPU whose death we're awaiting. + * + * This function is called from the context of the thread which is performing + * the cpu-offline. Here we wait for long enough to allow the cpu in question + * to self-destroy so that the cpu-offline thread can send the CPU_DEAD + * notifications. + * + * OTOH, pseries_mach_cpu_die() is called by the @cpu when it wants to + * self-destruct. + */ static void pseries_cpu_die(unsigned int cpu) { int tries; - int cpu_status; + int cpu_status = 1; unsigned int pcpu = get_hard_smp_processor_id(cpu); - for (tries = 0; tries < 25; tries++) { - cpu_status = query_cpu_stopped(pcpu); - if (cpu_status == 0 || cpu_status == -1) - break; - cpu_relax(); + if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { + cpu_status = 1; + for (tries = 0; tries < 1000; tries++) { + if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) { + cpu_status = 0; + break; + } + cpu_relax(); + } + } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) { + + for (tries = 0; tries < 25; tries++) { + cpu_status = query_cpu_stopped(pcpu); + if (cpu_status == 0 || cpu_status == -1) + break; + cpu_relax(); + } } + if (cpu_status != 0) { printk("Querying DEAD? cpu %i (%i) shows %i\n", cpu, pcpu, cpu_status); @@ -252,10 +377,41 @@ static struct notifier_block pseries_smp_nb = { .notifier_call = pseries_smp_notifier, }; +#define MAX_CEDE_LATENCY_LEVELS 4 +#define CEDE_LATENCY_PARAM_LENGTH 10 +#define CEDE_LATENCY_PARAM_MAX_LENGTH \ + (MAX_CEDE_LATENCY_LEVELS * CEDE_LATENCY_PARAM_LENGTH * sizeof(char)) +#define CEDE_LATENCY_TOKEN 45 + +static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH]; + +static int parse_cede_parameters(void) +{ + int call_status; + + memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH); + call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, + NULL, + CEDE_LATENCY_TOKEN, + __pa(cede_parameters), + CEDE_LATENCY_PARAM_MAX_LENGTH); + + if (call_status != 0) + printk(KERN_INFO "CEDE_LATENCY: \ + %s %s Error calling get-system-parameter(0x%x)\n", + __FILE__, __func__, call_status); + else + printk(KERN_INFO "CEDE_LATENCY: \ + get-system-parameter successful.\n"); + + return call_status; +} + static int __init pseries_cpu_hotplug_init(void) { struct device_node *np; const char *typep; + int cpu; for_each_node_by_name(np, "interrupt-controller") { typep = of_get_property(np, "compatible", NULL); @@ -283,8 +439,16 @@ static int __init pseries_cpu_hotplug_init(void) smp_ops->cpu_die = pseries_cpu_die; /* Processors can be added/removed only on LPAR */ - if (firmware_has_feature(FW_FEATURE_LPAR)) + if (firmware_has_feature(FW_FEATURE_LPAR)) { pSeries_reconfig_notifier_register(&pseries_smp_nb); + cpu_maps_update_begin(); + if (cede_offline_enabled && parse_cede_parameters() == 0) { + default_offline_state = CPU_STATE_INACTIVE; + for_each_online_cpu(cpu) + set_default_offline_state(cpu); + } + cpu_maps_update_done(); + } return 0; } diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h new file mode 100644 index 000000000000..22574e0d9d91 --- /dev/null +++ b/arch/powerpc/platforms/pseries/offline_states.h @@ -0,0 +1,18 @@ +#ifndef _OFFLINE_STATES_H_ +#define _OFFLINE_STATES_H_ + +/* Cpu offline states go here */ +enum cpu_state_vals { + CPU_STATE_OFFLINE, + CPU_STATE_INACTIVE, + CPU_STATE_ONLINE, + CPU_MAX_OFFLINE_STATES +}; + +extern enum cpu_state_vals get_cpu_current_state(int cpu); +extern void set_cpu_current_state(int cpu, enum cpu_state_vals state); +extern enum cpu_state_vals get_preferred_offline_state(int cpu); +extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state); +extern void set_default_offline_state(int cpu); +extern int start_secondary(void); +#endif diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index a24a6b2333b2..0603c91538ae 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -9,11 +9,33 @@ static inline long poll_pending(void) return plpar_hcall_norets(H_POLL_PENDING); } +static inline u8 get_cede_latency_hint(void) +{ + return get_lppaca()->gpr5_dword.fields.cede_latency_hint; +} + +static inline void set_cede_latency_hint(u8 latency_hint) +{ + get_lppaca()->gpr5_dword.fields.cede_latency_hint = latency_hint; +} + static inline long cede_processor(void) { return plpar_hcall_norets(H_CEDE); } +static inline long extended_cede_processor(unsigned long latency_hint) +{ + long rc; + u8 old_latency_hint = get_cede_latency_hint(); + + set_cede_latency_hint(latency_hint); + rc = cede_processor(); + set_cede_latency_hint(old_latency_hint); + + return rc; +} + static inline long vpa_call(unsigned long flags, unsigned long cpu, unsigned long vpa) { diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c index 2e2bbe120b90..a2305d29bbbd 100644 --- a/arch/powerpc/platforms/pseries/reconfig.c +++ b/arch/powerpc/platforms/pseries/reconfig.c @@ -96,7 +96,7 @@ static struct device_node *derive_parent(const char *path) return parent; } -static BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain); +BLOCKING_NOTIFIER_HEAD(pSeries_reconfig_chain); int pSeries_reconfig_notifier_register(struct notifier_block *nb) { @@ -184,7 +184,7 @@ static int pSeries_reconfig_remove_node(struct device_node *np) } /* - * /proc/ppc64/ofdt - yucky binary interface for adding and removing + * /proc/powerpc/ofdt - yucky binary interface for adding and removing * OF device nodes. Should be deprecated as soon as we get an * in-kernel wrapper for the RTAS ibm,configure-connector call. */ @@ -543,7 +543,7 @@ static const struct file_operations ofdt_fops = { .write = ofdt_write }; -/* create /proc/ppc64/ofdt write-only by root */ +/* create /proc/powerpc/ofdt write-only by root */ static int proc_ppc64_create_ofdt(void) { struct proc_dir_entry *ent; @@ -551,7 +551,7 @@ static int proc_ppc64_create_ofdt(void) if (!machine_is(pseries)) return 0; - ent = proc_create("ppc64/ofdt", S_IWUSR, NULL, &ofdt_fops); + ent = proc_create("powerpc/ofdt", S_IWUSR, NULL, &ofdt_fops); if (ent) ent->size = 0; diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c index 417eca79df69..1b45c458f952 100644 --- a/arch/powerpc/platforms/pseries/scanlog.c +++ b/arch/powerpc/platforms/pseries/scanlog.c @@ -13,7 +13,7 @@ * of this data using this driver. A dump exists if the device-tree * /chosen/ibm,scan-log-data property exists. * - * This driver exports /proc/ppc64/scan-log-dump which can be read. + * This driver exports /proc/powerpc/scan-log-dump which can be read. * The driver supports only sequential reads. * * The driver looks at a write to the driver for the single word "reset". @@ -186,7 +186,7 @@ static int __init scanlog_init(void) if (!data) goto err; - ent = proc_create_data("ppc64/rtas/scan-log-dump", S_IRUSR, NULL, + ent = proc_create_data("powerpc/rtas/scan-log-dump", S_IRUSR, NULL, &scanlog_fops, data); if (!ent) goto err; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 440000cc7130..8868c012268a 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -48,6 +48,7 @@ #include "plpar_wrappers.h" #include "pseries.h" #include "xics.h" +#include "offline_states.h" /* @@ -84,6 +85,9 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) /* Fixup atomic count: it exited inside IRQ handler. */ task_thread_info(paca[lcpu].__current)->preempt_count = 0; + if (get_cpu_current_state(lcpu) == CPU_STATE_INACTIVE) + goto out; + /* * If the RTAS start-cpu token does not exist then presume the * cpu is already spinning. @@ -98,6 +102,7 @@ static inline int __devinit smp_startup_cpu(unsigned int lcpu) return 0; } +out: return 1; } @@ -111,12 +116,16 @@ static void __devinit smp_xics_setup_cpu(int cpu) vpa_init(cpu); cpu_clear(cpu, of_spin_map); + set_cpu_current_state(cpu, CPU_STATE_ONLINE); + set_default_offline_state(cpu); } #endif /* CONFIG_XICS */ static void __devinit smp_pSeries_kick_cpu(int nr) { + long rc; + unsigned long hcpuid; BUG_ON(nr < 0 || nr >= NR_CPUS); if (!smp_startup_cpu(nr)) @@ -128,6 +137,16 @@ static void __devinit smp_pSeries_kick_cpu(int nr) * the processor will continue on to secondary_start */ paca[nr].cpu_start = 1; + + set_preferred_offline_state(nr, CPU_STATE_ONLINE); + + if (get_cpu_current_state(nr) == CPU_STATE_INACTIVE) { + hcpuid = get_hard_smp_processor_id(nr); + rc = plpar_hcall_norets(H_PROD, hcpuid); + if (rc != H_SUCCESS) + panic("Error: Prod to wake up processor %d Ret= %ld\n", + nr, rc); + } } static int smp_pSeries_cpu_bootable(unsigned int nr) diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index b9bf0eedccf2..7d01b58f3989 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -20,6 +20,7 @@ #include <linux/cpu.h> #include <linux/msi.h> #include <linux/of.h> +#include <linux/percpu.h> #include <asm/firmware.h> #include <asm/io.h> @@ -46,6 +47,12 @@ static struct irq_host *xics_host; */ #define IPI_PRIORITY 4 +/* The least favored priority */ +#define LOWEST_PRIORITY 0xFF + +/* The number of priorities defined above */ +#define MAX_NUM_PRIORITIES 3 + static unsigned int default_server = 0xFF; static unsigned int default_distrib_server = 0; static unsigned int interrupt_server_size = 8; @@ -56,6 +63,12 @@ static int ibm_set_xive; static int ibm_int_on; static int ibm_int_off; +struct xics_cppr { + unsigned char stack[MAX_NUM_PRIORITIES]; + int index; +}; + +static DEFINE_PER_CPU(struct xics_cppr, xics_cppr); /* Direct hardware low level accessors */ @@ -157,7 +170,7 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check) cpumask_t cpumask; cpumask_t tmp = CPU_MASK_NONE; - cpumask_copy(&cpumask, irq_desc[virq].affinity); + cpumask_copy(&cpumask, irq_to_desc(virq)->affinity); if (!distribute_irqs) return default_server; @@ -284,6 +297,19 @@ static inline unsigned int xics_xirr_vector(unsigned int xirr) return xirr & 0x00ffffff; } +static void push_cppr(unsigned int vec) +{ + struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr); + + if (WARN_ON(os_cppr->index >= MAX_NUM_PRIORITIES - 1)) + return; + + if (vec == XICS_IPI) + os_cppr->stack[++os_cppr->index] = IPI_PRIORITY; + else + os_cppr->stack[++os_cppr->index] = DEFAULT_PRIORITY; +} + static unsigned int xics_get_irq_direct(void) { unsigned int xirr = direct_xirr_info_get(); @@ -294,8 +320,10 @@ static unsigned int xics_get_irq_direct(void) return NO_IRQ; irq = irq_radix_revmap_lookup(xics_host, vec); - if (likely(irq != NO_IRQ)) + if (likely(irq != NO_IRQ)) { + push_cppr(vec); return irq; + } /* We don't have a linux mapping, so have rtas mask it. */ xics_mask_unknown_vec(vec); @@ -315,8 +343,10 @@ static unsigned int xics_get_irq_lpar(void) return NO_IRQ; irq = irq_radix_revmap_lookup(xics_host, vec); - if (likely(irq != NO_IRQ)) + if (likely(irq != NO_IRQ)) { + push_cppr(vec); return irq; + } /* We don't have a linux mapping, so have RTAS mask it. */ xics_mask_unknown_vec(vec); @@ -326,12 +356,22 @@ static unsigned int xics_get_irq_lpar(void) return NO_IRQ; } +static unsigned char pop_cppr(void) +{ + struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr); + + if (WARN_ON(os_cppr->index < 1)) + return LOWEST_PRIORITY; + + return os_cppr->stack[--os_cppr->index]; +} + static void xics_eoi_direct(unsigned int virq) { unsigned int irq = (unsigned int)irq_map[virq].hwirq; iosync(); - direct_xirr_info_set((0xff << 24) | irq); + direct_xirr_info_set((pop_cppr() << 24) | irq); } static void xics_eoi_lpar(unsigned int virq) @@ -339,7 +379,7 @@ static void xics_eoi_lpar(unsigned int virq) unsigned int irq = (unsigned int)irq_map[virq].hwirq; iosync(); - lpar_xirr_info_set((0xff << 24) | irq); + lpar_xirr_info_set((pop_cppr() << 24) | irq); } static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) @@ -388,7 +428,7 @@ static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) } static struct irq_chip xics_pic_direct = { - .typename = " XICS ", + .name = " XICS ", .startup = xics_startup, .mask = xics_mask_irq, .unmask = xics_unmask_irq, @@ -397,7 +437,7 @@ static struct irq_chip xics_pic_direct = { }; static struct irq_chip xics_pic_lpar = { - .typename = " XICS ", + .name = " XICS ", .startup = xics_startup, .mask = xics_mask_irq, .unmask = xics_unmask_irq, @@ -428,13 +468,13 @@ static int xics_host_map(struct irq_host *h, unsigned int virq, /* Insert the interrupt mapping into the radix tree for fast lookup */ irq_radix_revmap_insert(xics_host, virq, hw); - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq); return 0; } static int xics_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { @@ -746,6 +786,12 @@ void __init xics_init_IRQ(void) static void xics_set_cpu_priority(unsigned char cppr) { + struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr); + + BUG_ON(os_cppr->index != 0); + + os_cppr->stack[os_cppr->index] = cppr; + if (firmware_has_feature(FW_FEATURE_LPAR)) lpar_cppr_info(cppr); else @@ -772,7 +818,7 @@ static void xics_set_cpu_giq(unsigned int gserver, unsigned int join) void xics_setup_cpu(void) { - xics_set_cpu_priority(0xff); + xics_set_cpu_priority(LOWEST_PRIORITY); xics_set_cpu_giq(default_distrib_server, 1); } @@ -852,7 +898,7 @@ void xics_migrate_irqs_away(void) /* We need to get IPIs still. */ if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) continue; - desc = get_irq_desc(virq); + desc = irq_to_desc(virq); /* We only need to migrate enabled IRQS */ if (desc == NULL || desc->chip == NULL @@ -881,7 +927,7 @@ void xics_migrate_irqs_away(void) virq, cpu); /* Reset affinity to all cpus */ - cpumask_setall(irq_desc[virq].affinity); + cpumask_setall(irq_to_desc(virq)->affinity); desc->chip->set_affinity(virq, cpu_all_mask); unlock: spin_unlock_irqrestore(&desc->lock, flags); diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 9d4b17462f13..5642924fb9fb 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_FSL_PCI) += fsl_pci.o $(fsl-msi-obj-y) +obj-$(CONFIG_FSL_PMC) += fsl_pmc.o obj-$(CONFIG_FSL_LBC) += fsl_lbc.o obj-$(CONFIG_FSL_GTM) += fsl_gtm.o obj-$(CONFIG_MPC8xxx_GPIO) += mpc8xxx_gpio.o diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index 82424cd7e128..a4b41dbde128 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -77,7 +77,7 @@ static void cpm_end_irq(unsigned int irq) } static struct irq_chip cpm_pic = { - .typename = " CPM PIC ", + .name = " CPM PIC ", .mask = cpm_mask_irq, .unmask = cpm_unmask_irq, .eoi = cpm_end_irq, @@ -102,7 +102,7 @@ static int cpm_pic_host_map(struct irq_host *h, unsigned int virq, { pr_debug("cpm_pic_host_map(%d, 0x%lx)\n", virq, hw); - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq); return 0; } diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index 78f1f7cca0a0..971483f0dfac 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -115,11 +115,13 @@ static void cpm2_ack(unsigned int virq) static void cpm2_end_irq(unsigned int virq) { + struct irq_desc *desc; int bit, word; unsigned int irq_nr = virq_to_hw(virq); - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) - && irq_desc[irq_nr].action) { + desc = irq_to_desc(irq_nr); + if (!(desc->status & (IRQ_DISABLED|IRQ_INPROGRESS)) + && desc->action) { bit = irq_to_siubit[irq_nr]; word = irq_to_siureg[irq_nr]; @@ -138,7 +140,7 @@ static void cpm2_end_irq(unsigned int virq) static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) { unsigned int src = virq_to_hw(virq); - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); unsigned int vold, vnew, edibit; if (flow_type == IRQ_TYPE_NONE) @@ -182,7 +184,7 @@ static int cpm2_set_irq_type(unsigned int virq, unsigned int flow_type) } static struct irq_chip cpm2_pic = { - .typename = " CPM2 SIU ", + .name = " CPM2 SIU ", .mask = cpm2_mask_irq, .unmask = cpm2_unmask_irq, .ack = cpm2_ack, @@ -210,13 +212,13 @@ static int cpm2_pic_host_map(struct irq_host *h, unsigned int virq, { pr_debug("cpm2_pic_host_map(%d, 0x%lx)\n", virq, hw); - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &cpm2_pic, handle_level_irq); return 0; } static int cpm2_pic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { *out_hwirq = intspec[0]; diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c index e4b6d66d93de..9de72c96e6d1 100644 --- a/arch/powerpc/sysdev/cpm_common.c +++ b/arch/powerpc/sysdev/cpm_common.c @@ -72,7 +72,7 @@ static phys_addr_t muram_pbase; /* Max address size we deal with */ #define OF_MAX_ADDR_CELLS 4 -int __init cpm_muram_init(void) +int cpm_muram_init(void) { struct device_node *np; struct resource r; @@ -81,6 +81,9 @@ int __init cpm_muram_init(void) int i = 0; int ret = 0; + if (muram_pbase) + return 0; + spin_lock_init(&cpm_muram_lock); /* initialize the info header */ rh_init(&cpm_muram_info, 1, diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index da38a1ff97bb..62e50258cdef 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -47,7 +47,7 @@ static struct irq_chip fsl_msi_chip = { .mask = mask_msi_irq, .unmask = unmask_msi_irq, .ack = fsl_msi_end_irq, - .typename = " FSL-MSI ", + .name = " FSL-MSI ", }; static int fsl_msi_host_map(struct irq_host *h, unsigned int virq, @@ -55,7 +55,7 @@ static int fsl_msi_host_map(struct irq_host *h, unsigned int virq, { struct irq_chip *chip = &fsl_msi_chip; - get_irq_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING; + irq_to_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING; set_irq_chip_and_handler(virq, chip, handle_edge_irq); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index ae88b1448018..4e3a3e345ab3 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -56,7 +56,7 @@ static int __init fsl_pcie_check_link(struct pci_controller *hose) return 0; } -#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) +#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, unsigned int index, const struct resource *res, resource_size_t offset) @@ -392,9 +392,23 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1011, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1013, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1020, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P1022, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2010, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header); DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header); -#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */ +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4040, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header); +#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header); diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c new file mode 100644 index 000000000000..a7635a993dca --- /dev/null +++ b/arch/powerpc/sysdev/fsl_pmc.c @@ -0,0 +1,88 @@ +/* + * Suspend/resume support + * + * Copyright 2009 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/suspend.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/of_platform.h> + +struct pmc_regs { + __be32 devdisr; + __be32 devdisr2; + __be32 :32; + __be32 :32; + __be32 pmcsr; +#define PMCSR_SLP (1 << 17) +}; + +static struct device *pmc_dev; +static struct pmc_regs __iomem *pmc_regs; + +static int pmc_suspend_enter(suspend_state_t state) +{ + int ret; + + setbits32(&pmc_regs->pmcsr, PMCSR_SLP); + /* At this point, the CPU is asleep. */ + + /* Upon resume, wait for SLP bit to be clear. */ + ret = spin_event_timeout((in_be32(&pmc_regs->pmcsr) & PMCSR_SLP) == 0, + 10000, 10) ? 0 : -ETIMEDOUT; + if (ret) + dev_err(pmc_dev, "tired waiting for SLP bit to clear\n"); + return ret; +} + +static int pmc_suspend_valid(suspend_state_t state) +{ + if (state != PM_SUSPEND_STANDBY) + return 0; + return 1; +} + +static struct platform_suspend_ops pmc_suspend_ops = { + .valid = pmc_suspend_valid, + .enter = pmc_suspend_enter, +}; + +static int pmc_probe(struct of_device *ofdev, const struct of_device_id *id) +{ + pmc_regs = of_iomap(ofdev->node, 0); + if (!pmc_regs) + return -ENOMEM; + + pmc_dev = &ofdev->dev; + suspend_set_ops(&pmc_suspend_ops); + return 0; +} + +static const struct of_device_id pmc_ids[] = { + { .compatible = "fsl,mpc8548-pmc", }, + { .compatible = "fsl,mpc8641d-pmc", }, + { }, +}; + +static struct of_platform_driver pmc_driver = { + .driver.name = "fsl-pmc", + .match_table = pmc_ids, + .probe = pmc_probe, +}; + +static int __init pmc_init(void) +{ + return of_register_platform_driver(&pmc_driver); +} +device_initcall(pmc_init); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index adca4affcf1f..b91f7acdda6f 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -372,7 +372,7 @@ err: arch_initcall(fsl_usb_of_init); -#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) +#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) static __be32 __iomem *rstcr; static int __init setup_rstcr(void) diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index a96584ab33dd..0a55db8a5a29 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -135,7 +135,7 @@ static void i8259_unmask_irq(unsigned int irq_nr) } static struct irq_chip i8259_pic = { - .typename = " i8259 ", + .name = " i8259 ", .mask = i8259_mask_irq, .disable = i8259_mask_irq, .unmask = i8259_unmask_irq, @@ -175,12 +175,12 @@ static int i8259_host_map(struct irq_host *h, unsigned int virq, /* We block the internal cascade */ if (hw == 2) - get_irq_desc(virq)->status |= IRQ_NOREQUEST; + irq_to_desc(virq)->status |= IRQ_NOREQUEST; /* We use the level handler only for now, we might want to * be more cautious here but that works for now */ - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq); return 0; } @@ -198,7 +198,7 @@ static void i8259_host_unmap(struct irq_host *h, unsigned int virq) } static int i8259_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { static unsigned char map_isa_senses[4] = { diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index cb7689c4bfbd..28cdddd2f89e 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -605,7 +605,7 @@ static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type) { struct ipic *ipic = ipic_from_irq(virq); unsigned int src = ipic_irq_to_hw(virq); - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); unsigned int vold, vnew, edibit; if (flow_type == IRQ_TYPE_NONE) @@ -660,7 +660,7 @@ static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type) /* level interrupts and edge interrupts have different ack operations */ static struct irq_chip ipic_level_irq_chip = { - .typename = " IPIC ", + .name = " IPIC ", .unmask = ipic_unmask_irq, .mask = ipic_mask_irq, .mask_ack = ipic_mask_irq, @@ -668,7 +668,7 @@ static struct irq_chip ipic_level_irq_chip = { }; static struct irq_chip ipic_edge_irq_chip = { - .typename = " IPIC ", + .name = " IPIC ", .unmask = ipic_unmask_irq, .mask = ipic_mask_irq, .mask_ack = ipic_mask_irq_and_ack, @@ -697,7 +697,7 @@ static int ipic_host_map(struct irq_host *h, unsigned int virq, } static int ipic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c index 5d2d5522ef41..69bd6f4dff83 100644 --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -72,7 +72,7 @@ static void mpc8xx_end_irq(unsigned int virq) static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type) { - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; @@ -94,7 +94,7 @@ static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type) } static struct irq_chip mpc8xx_pic = { - .typename = " MPC8XX SIU ", + .name = " MPC8XX SIU ", .unmask = mpc8xx_unmask_irq, .mask = mpc8xx_mask_irq, .ack = mpc8xx_ack, @@ -130,7 +130,7 @@ static int mpc8xx_pic_host_map(struct irq_host *h, unsigned int virq, static int mpc8xx_pic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { static unsigned char map_pic_senses[4] = { diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 30c44e6b0413..aa9d06e5925b 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -572,7 +572,7 @@ static int irq_choose_cpu(unsigned int virt_irq) cpumask_t mask; int cpuid; - cpumask_copy(&mask, irq_desc[virt_irq].affinity); + cpumask_copy(&mask, irq_to_desc(virt_irq)->affinity); if (cpus_equal(mask, CPU_MASK_ALL)) { static int irq_rover; static DEFINE_SPINLOCK(irq_rover_lock); @@ -621,7 +621,7 @@ static struct mpic *mpic_find(unsigned int irq) if (irq < NUM_ISA_INTERRUPTS) return NULL; - return irq_desc[irq].chip_data; + return irq_to_desc(irq)->chip_data; } /* Determine if the linux irq is an IPI */ @@ -648,14 +648,14 @@ static inline u32 mpic_physmask(u32 cpumask) /* Get the mpic structure from the IPI number */ static inline struct mpic * mpic_from_ipi(unsigned int ipi) { - return irq_desc[ipi].chip_data; + return irq_to_desc(ipi)->chip_data; } #endif /* Get the mpic structure from the irq number */ static inline struct mpic * mpic_from_irq(unsigned int irq) { - return irq_desc[irq].chip_data; + return irq_to_desc(irq)->chip_data; } /* Send an EOI */ @@ -735,7 +735,7 @@ static void mpic_unmask_ht_irq(unsigned int irq) mpic_unmask_irq(irq); - if (irq_desc[irq].status & IRQ_LEVEL) + if (irq_to_desc(irq)->status & IRQ_LEVEL) mpic_ht_end_irq(mpic, src); } @@ -745,7 +745,7 @@ static unsigned int mpic_startup_ht_irq(unsigned int irq) unsigned int src = mpic_irq_to_hw(irq); mpic_unmask_irq(irq); - mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); + mpic_startup_ht_interrupt(mpic, src, irq_to_desc(irq)->status); return 0; } @@ -755,7 +755,7 @@ static void mpic_shutdown_ht_irq(unsigned int irq) struct mpic *mpic = mpic_from_irq(irq); unsigned int src = mpic_irq_to_hw(irq); - mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status); + mpic_shutdown_ht_interrupt(mpic, src, irq_to_desc(irq)->status); mpic_mask_irq(irq); } @@ -772,7 +772,7 @@ static void mpic_end_ht_irq(unsigned int irq) * latched another edge interrupt coming in anyway */ - if (irq_desc[irq].status & IRQ_LEVEL) + if (irq_to_desc(irq)->status & IRQ_LEVEL) mpic_ht_end_irq(mpic, src); mpic_eoi(mpic); } @@ -856,7 +856,7 @@ int mpic_set_irq_type(unsigned int virq, unsigned int flow_type) { struct mpic *mpic = mpic_from_irq(virq); unsigned int src = mpic_irq_to_hw(virq); - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); unsigned int vecpri, vold, vnew; DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n", @@ -994,7 +994,7 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, } static int mpic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { @@ -1062,19 +1062,19 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->name = name; mpic->hc_irq = mpic_irq_chip; - mpic->hc_irq.typename = name; + mpic->hc_irq.name = name; if (flags & MPIC_PRIMARY) mpic->hc_irq.set_affinity = mpic_set_affinity; #ifdef CONFIG_MPIC_U3_HT_IRQS mpic->hc_ht_irq = mpic_irq_ht_chip; - mpic->hc_ht_irq.typename = name; + mpic->hc_ht_irq.name = name; if (flags & MPIC_PRIMARY) mpic->hc_ht_irq.set_affinity = mpic_set_affinity; #endif /* CONFIG_MPIC_U3_HT_IRQS */ #ifdef CONFIG_SMP mpic->hc_ipi = mpic_ipi_chip; - mpic->hc_ipi.typename = name; + mpic->hc_ipi.name = name; #endif /* CONFIG_SMP */ mpic->flags = flags; diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c index 656cb772b691..0f6ab06f8474 100644 --- a/arch/powerpc/sysdev/mpic_pasemi_msi.c +++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c @@ -60,7 +60,7 @@ static struct irq_chip mpic_pasemi_msi_chip = { .eoi = mpic_end_irq, .set_type = mpic_set_irq_type, .set_affinity = mpic_set_affinity, - .typename = "PASEMI-MSI ", + .name = "PASEMI-MSI ", }; static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type) diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c index 0a8f5a9e87c9..d3caf23e6312 100644 --- a/arch/powerpc/sysdev/mpic_u3msi.c +++ b/arch/powerpc/sysdev/mpic_u3msi.c @@ -42,7 +42,7 @@ static struct irq_chip mpic_u3msi_chip = { .eoi = mpic_end_irq, .set_type = mpic_set_irq_type, .set_affinity = mpic_set_affinity, - .typename = "MPIC-U3MSI", + .name = "MPIC-U3MSI", }; static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos) diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c index 2aa4ed066db1..485b92477d7c 100644 --- a/arch/powerpc/sysdev/mv64x60_pic.c +++ b/arch/powerpc/sysdev/mv64x60_pic.c @@ -213,7 +213,7 @@ static int mv64x60_host_map(struct irq_host *h, unsigned int virq, { int level1; - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; level1 = (hwirq & MV64x60_LEVEL1_MASK) >> MV64x60_LEVEL1_OFFSET; BUG_ON(level1 > MV64x60_LEVEL1_GPP); diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 464271bea6c9..149393c02c3f 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -27,6 +27,8 @@ #include <linux/delay.h> #include <linux/ioport.h> #include <linux/crc32.h> +#include <linux/mod_devicetable.h> +#include <linux/of_platform.h> #include <asm/irq.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -65,19 +67,6 @@ static unsigned int qe_num_of_snum; static phys_addr_t qebase = -1; -int qe_alive_during_sleep(void) -{ - static int ret = -1; - - if (ret != -1) - return ret; - - ret = !of_find_compatible_node(NULL, NULL, "fsl,mpc8569-pmc"); - - return ret; -} -EXPORT_SYMBOL(qe_alive_during_sleep); - phys_addr_t get_qe_base(void) { struct device_node *qe; @@ -104,7 +93,7 @@ phys_addr_t get_qe_base(void) EXPORT_SYMBOL(get_qe_base); -void __init qe_reset(void) +void qe_reset(void) { if (qe_immr == NULL) qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE); @@ -330,16 +319,18 @@ EXPORT_SYMBOL(qe_put_snum); static int qe_sdma_init(void) { struct sdma __iomem *sdma = &qe_immr->sdma; - unsigned long sdma_buf_offset; + static unsigned long sdma_buf_offset = (unsigned long)-ENOMEM; if (!sdma) return -ENODEV; /* allocate 2 internal temporary buffers (512 bytes size each) for * the SDMA */ - sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); - if (IS_ERR_VALUE(sdma_buf_offset)) - return -ENOMEM; + if (IS_ERR_VALUE(sdma_buf_offset)) { + sdma_buf_offset = qe_muram_alloc(512 * 2, 4096); + if (IS_ERR_VALUE(sdma_buf_offset)) + return -ENOMEM; + } out_be32(&sdma->sdebcr, (u32) sdma_buf_offset & QE_SDEBCR_BA_MASK); out_be32(&sdma->sdmr, (QE_SDMR_GLB_1_MSK | @@ -349,7 +340,7 @@ static int qe_sdma_init(void) } /* The maximum number of RISCs we support */ -#define MAX_QE_RISC 2 +#define MAX_QE_RISC 4 /* Firmware information stored here for qe_get_firmware_info() */ static struct qe_firmware_info qe_firmware_info; @@ -658,3 +649,35 @@ unsigned int qe_get_num_of_snums(void) return num_of_snums; } EXPORT_SYMBOL(qe_get_num_of_snums); + +#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) +static int qe_resume(struct of_device *ofdev) +{ + if (!qe_alive_during_sleep()) + qe_reset(); + return 0; +} + +static int qe_probe(struct of_device *ofdev, const struct of_device_id *id) +{ + return 0; +} + +static const struct of_device_id qe_ids[] = { + { .compatible = "fsl,qe", }, + { }, +}; + +static struct of_platform_driver qe_driver = { + .driver.name = "fsl-qe", + .match_table = qe_ids, + .probe = qe_probe, + .resume = qe_resume, +}; + +static int __init qe_drv_init(void) +{ + return of_register_platform_driver(&qe_driver); +} +device_initcall(qe_drv_init); +#endif /* defined(CONFIG_SUSPEND) && defined(CONFIG_PPC_85xx) */ diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 3faa42e03a85..2acc928d1920 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -189,7 +189,7 @@ static inline void qe_ic_write(volatile __be32 __iomem * base, unsigned int reg static inline struct qe_ic *qe_ic_from_irq(unsigned int virq) { - return irq_desc[virq].chip_data; + return irq_to_desc(virq)->chip_data; } #define virq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) @@ -237,7 +237,7 @@ static void qe_ic_mask_irq(unsigned int virq) } static struct irq_chip qe_ic_irq_chip = { - .typename = " QEIC ", + .name = " QEIC ", .unmask = qe_ic_unmask_irq, .mask = qe_ic_mask_irq, .mask_ack = qe_ic_mask_irq, @@ -263,7 +263,7 @@ static int qe_ic_host_map(struct irq_host *h, unsigned int virq, chip = &qe_ic->hc_irq; set_irq_chip_data(virq, qe_ic); - get_irq_desc(virq)->status |= IRQ_LEVEL; + irq_to_desc(virq)->status |= IRQ_LEVEL; set_irq_chip_and_handler(virq, chip, handle_level_irq); @@ -271,7 +271,7 @@ static int qe_ic_host_map(struct irq_host *h, unsigned int virq, } static int qe_ic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 * intspec, unsigned int intsize, + const u32 * intspec, unsigned int intsize, irq_hw_number_t * out_hwirq, unsigned int *out_flags) { diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index cf244a419e96..595034cfb85a 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -376,7 +376,7 @@ static void tsi108_pci_irq_end(u_int irq) */ static struct irq_chip tsi108_pci_irq = { - .typename = "tsi108_PCI_int", + .name = "tsi108_PCI_int", .mask = tsi108_pci_irq_disable, .ack = tsi108_pci_irq_ack, .end = tsi108_pci_irq_end, @@ -384,7 +384,7 @@ static struct irq_chip tsi108_pci_irq = { }; static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { *out_hwirq = intspec[0]; @@ -398,7 +398,7 @@ static int pci_irq_host_map(struct irq_host *h, unsigned int virq, DBG("%s(%d, 0x%lx)\n", __func__, virq, hw); if ((virq >= 1) && (virq <= 4)){ irq = virq + IRQ_PCI_INTAD_BASE - 1; - get_irq_desc(irq)->status |= IRQ_LEVEL; + irq_to_desc(irq)->status |= IRQ_LEVEL; set_irq_chip(irq, &tsi108_pci_irq); } return 0; diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index 466ce9ace127..7d10074b3304 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -57,7 +57,7 @@ struct uic { static void uic_unmask_irq(unsigned int virq) { - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); struct uic *uic = get_irq_chip_data(virq); unsigned int src = uic_irq_to_hw(virq); unsigned long flags; @@ -101,7 +101,7 @@ static void uic_ack_irq(unsigned int virq) static void uic_mask_ack_irq(unsigned int virq) { - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); struct uic *uic = get_irq_chip_data(virq); unsigned int src = uic_irq_to_hw(virq); unsigned long flags; @@ -129,7 +129,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type) { struct uic *uic = get_irq_chip_data(virq); unsigned int src = uic_irq_to_hw(virq); - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); unsigned long flags; int trigger, polarity; u32 tr, pr, mask; @@ -177,7 +177,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type) } static struct irq_chip uic_irq_chip = { - .typename = " UIC ", + .name = " UIC ", .unmask = uic_unmask_irq, .mask = uic_mask_irq, .mask_ack = uic_mask_ack_irq, @@ -202,7 +202,7 @@ static int uic_host_map(struct irq_host *h, unsigned int virq, } static int uic_host_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_type) { diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index 40edad520770..1e0ccfaf403e 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -79,7 +79,7 @@ static void xilinx_intc_mask(unsigned int virq) static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type) { - struct irq_desc *desc = get_irq_desc(virq); + struct irq_desc *desc = irq_to_desc(virq); desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; @@ -106,7 +106,7 @@ static void xilinx_intc_level_unmask(unsigned int virq) } static struct irq_chip xilinx_intc_level_irqchip = { - .typename = "Xilinx Level INTC", + .name = "Xilinx Level INTC", .mask = xilinx_intc_mask, .mask_ack = xilinx_intc_mask, .unmask = xilinx_intc_level_unmask, @@ -133,7 +133,7 @@ static void xilinx_intc_edge_ack(unsigned int virq) } static struct irq_chip xilinx_intc_edge_irqchip = { - .typename = "Xilinx Edge INTC", + .name = "Xilinx Edge INTC", .mask = xilinx_intc_mask, .unmask = xilinx_intc_edge_unmask, .ack = xilinx_intc_edge_ack, @@ -148,7 +148,7 @@ static struct irq_chip xilinx_intc_edge_irqchip = { * xilinx_intc_xlate - translate virq# from device tree interrupts property */ static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct, - u32 *intspec, unsigned int intsize, + const u32 *intspec, unsigned int intsize, irq_hw_number_t *out_hwirq, unsigned int *out_flags) { diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index bdbe96c8a7e4..4e6152c13764 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -1641,7 +1641,8 @@ static void super_regs(void) ptrLpPaca->saved_srr0, ptrLpPaca->saved_srr1); printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n", ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4); - printf(" Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5); + printf(" Saved Gpr5=%.16lx \n", + ptrLpPaca->gpr5_dword.saved_gpr5); } #endif diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index 25c31d681402..22c9e557bb22 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -624,38 +624,6 @@ struct mmap_arg_struct_emu31 { u32 offset; }; -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - struct file * file = NULL; - unsigned long error = -EBADF; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - if (!IS_ERR((void *) error) && error + len >= 0x80000000ULL) { - /* Result is out of bounds. */ - do_munmap(current->mm, addr, len); - error = -ENOMEM; - } - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - - asmlinkage unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg) { @@ -669,7 +637,8 @@ old32_mmap(struct mmap_arg_struct_emu31 __user *arg) if (a.offset & ~PAGE_MASK) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, + a.offset >> PAGE_SHIFT); out: return error; } @@ -682,7 +651,7 @@ sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg) if (copy_from_user(&a, arg, sizeof(a))) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); out: return error; } diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c index e9d94f61d500..86a74c9c9e63 100644 --- a/arch/s390/kernel/sys_s390.c +++ b/arch/s390/kernel/sys_s390.c @@ -32,32 +32,6 @@ #include <asm/uaccess.h> #include "entry.h" -/* common code for old and new mmaps */ -static inline long do_mmap2( - unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - long error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux for S/390 isn't able to handle more than 5 @@ -81,7 +55,7 @@ SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg) if (copy_from_user(&a, arg, sizeof(a))) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset); out: return error; } @@ -98,7 +72,7 @@ SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg) if (a.offset & ~PAGE_MASK) goto out; - error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); + error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); out: return error; } diff --git a/arch/score/kernel/sys_score.c b/arch/score/kernel/sys_score.c index 001249469866..856ed68a58e6 100644 --- a/arch/score/kernel/sys_score.c +++ b/arch/score/kernel/sys_score.c @@ -36,34 +36,16 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long pgoff) { - int error = -EBADF; - struct file *file = NULL; - - if (pgoff & (~PAGE_MASK >> 12)) - return -EINVAL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - return error; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - - return error; + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); } asmlinkage long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, off_t pgoff) + unsigned long flags, unsigned long fd, off_t offset) { - return sys_mmap2(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT); + if (unlikely(offset & ~PAGE_MASK)) + return -EINVAL; + return sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); } asmlinkage long diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index 8aa5d1ceaf14..71399cde03b5 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -28,37 +28,13 @@ #include <asm/cacheflush.h> #include <asm/cachectl.h> -static inline long -do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, int fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage int old_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, int fd, unsigned long off) { if (off & ~PAGE_MASK) return -EINVAL; - return do_mmap2(addr, len, prot, flags, fd, off>>PAGE_SHIFT); + return sys_mmap_pgoff(addr, len, prot, flags, fd, off>>PAGE_SHIFT); } asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, @@ -74,7 +50,7 @@ asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, pgoff >>= PAGE_SHIFT - 12; - return do_mmap2(addr, len, prot, flags, fd, pgoff); + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); } /* diff --git a/arch/sh/mm/mmap.c b/arch/sh/mm/mmap.c index d2984fa42d3d..afeb710ec5c3 100644 --- a/arch/sh/mm/mmap.c +++ b/arch/sh/mm/mmap.c @@ -54,7 +54,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, /* We do not accept a shared mapping if it would violate * cache aliasing constraints. */ - if ((flags & MAP_SHARED) && (addr & shm_align_mask)) + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & shm_align_mask)) return -EINVAL; return addr; } diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h index d4d9c9d852c3..3b9cfb39175e 100644 --- a/arch/sparc/include/asm/fcntl.h +++ b/arch/sparc/include/asm/fcntl.h @@ -1,14 +1,12 @@ #ifndef _SPARC_FCNTL_H #define _SPARC_FCNTL_H -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ #define O_APPEND 0x0008 #define FASYNC 0x0040 /* fcntl, for BSD compatibility */ #define O_CREAT 0x0200 /* not fcntl */ #define O_TRUNC 0x0400 /* not fcntl */ #define O_EXCL 0x0800 /* not fcntl */ -#define O_SYNC 0x2000 +#define O_DSYNC 0x2000 /* used to be O_SYNC, see below */ #define O_NONBLOCK 0x4000 #if defined(__sparc__) && defined(__arch64__) #define O_NDELAY 0x0004 @@ -20,6 +18,21 @@ #define O_DIRECT 0x100000 /* direct disk access hint */ #define O_NOATIME 0x200000 #define O_CLOEXEC 0x400000 +/* + * Before Linux 2.6.32 only O_DSYNC semantics were implemented, but using + * the O_SYNC flag. We continue to use the existing numerical value + * for O_DSYNC semantics now, but using the correct symbolic name for it. + * This new value is used to request true Posix O_SYNC semantics. It is + * defined in this strange way to make sure applications compiled against + * new headers get at least O_DSYNC semantics on older kernels. + * + * This has the nice side-effect that we can simply test for O_DSYNC + * wherever we do not care if O_DSYNC or O_SYNC is used. + * + * Note: __O_SYNC must never be used directly. + */ +#define __O_SYNC 0x800000 +#define O_SYNC (__O_SYNC|O_DSYNC) #define F_GETOWN 5 /* for sockets. */ #define F_SETOWN 6 /* for sockets. */ diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h index b63e51c3c3ee..b0576df6ec83 100644 --- a/arch/sparc/include/asm/pci_64.h +++ b/arch/sparc/include/asm/pci_64.h @@ -16,8 +16,6 @@ #define PCI_IRQ_NONE 0xffffffff -#define PCI_CACHE_LINE_BYTES 64 - static inline void pcibios_set_master(struct pci_dev *dev) { /* No special bus mastering setup handling */ diff --git a/arch/sparc/kernel/nmi.c b/arch/sparc/kernel/nmi.c index b129611590a4..f30f4a1ead23 100644 --- a/arch/sparc/kernel/nmi.c +++ b/arch/sparc/kernel/nmi.c @@ -47,7 +47,7 @@ static DEFINE_PER_CPU(short, wd_enabled); static int endflag __initdata; static DEFINE_PER_CPU(unsigned int, last_irq_sum); -static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(long, alert_counter); static DEFINE_PER_CPU(int, nmi_touch); void touch_nmi_watchdog(void) @@ -112,13 +112,13 @@ notrace __kprobes void perfctr_irq(int irq, struct pt_regs *regs) touched = 1; } if (!touched && __get_cpu_var(last_irq_sum) == sum) { - local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 30 * nmi_hz) + __this_cpu_inc(per_cpu_var(alert_counter)); + if (__this_cpu_read(per_cpu_var(alert_counter)) == 30 * nmi_hz) die_nmi("BUG: NMI Watchdog detected LOCKUP", regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; - local_set(&__get_cpu_var(alert_counter), 0); + __this_cpu_write(per_cpu_var(alert_counter), 0); } if (__get_cpu_var(wd_enabled)) { write_pic(picl_value(nmi_hz)); diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c index c68648662802..b85374f7cf94 100644 --- a/arch/sparc/kernel/pci.c +++ b/arch/sparc/kernel/pci.c @@ -1081,3 +1081,10 @@ void pci_resource_to_user(const struct pci_dev *pdev, int bar, *start = rp->start - offset; *end = rp->end - offset; } + +static int __init pcibios_init(void) +{ + pci_dfl_cache_line_size = 64 >> 2; + return 0; +} +subsys_initcall(pcibios_init); diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c index 00abe87e5b51..dc0ac197e7e2 100644 --- a/arch/sparc/kernel/sys_sparc32.c +++ b/arch/sparc/kernel/sys_sparc32.c @@ -564,28 +564,6 @@ asmlinkage long sparc32_open(const char __user *filename, return do_sys_open(AT_FDCWD, filename, flags, mode); } -extern unsigned long do_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr); - -asmlinkage unsigned long sys32_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, u32 __new_addr) -{ - unsigned long ret = -EINVAL; - unsigned long new_addr = __new_addr; - - if (unlikely(sparc_mmap_check(addr, old_len))) - goto out; - if (unlikely(sparc_mmap_check(new_addr, new_len))) - goto out; - down_write(¤t->mm->mmap_sem); - ret = do_mremap(addr, old_len, new_len, flags, new_addr); - up_write(¤t->mm->mmap_sem); -out: - return ret; -} - long sys32_lookup_dcookie(unsigned long cookie_high, unsigned long cookie_low, char __user *buf, size_t len) diff --git a/arch/sparc/kernel/sys_sparc_32.c b/arch/sparc/kernel/sys_sparc_32.c index 03035c852a43..3a82e65d8db2 100644 --- a/arch/sparc/kernel/sys_sparc_32.c +++ b/arch/sparc/kernel/sys_sparc_32.c @@ -45,7 +45,8 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi /* We do not accept a shared mapping if it would violate * cache aliasing constraints. */ - if ((flags & MAP_SHARED) && (addr & (SHMLBA - 1))) + if ((flags & MAP_SHARED) && + ((addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))) return -EINVAL; return addr; } @@ -79,15 +80,6 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi } } -asmlinkage unsigned long sparc_brk(unsigned long brk) -{ - if(ARCH_SUN4C) { - if ((brk & 0xe0000000) != (current->mm->brk & 0xe0000000)) - return current->mm->brk; - } - return sys_brk(brk); -} - /* * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. @@ -234,31 +226,6 @@ int sparc_mmap_check(unsigned long addr, unsigned long len) } /* Linux version of mmap */ -static unsigned long do_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, unsigned long fd, - unsigned long pgoff) -{ - struct file * file = NULL; - unsigned long retval = -EBADF; - - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - len = PAGE_ALIGN(len); - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - - down_write(¤t->mm->mmap_sem); - retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return retval; -} asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, @@ -266,14 +233,16 @@ asmlinkage unsigned long sys_mmap2(unsigned long addr, unsigned long len, { /* Make sure the shift for mmap2 is constant (12), no matter what PAGE_SIZE we have. */ - return do_mmap2(addr, len, prot, flags, fd, pgoff >> (PAGE_SHIFT - 12)); + return sys_mmap_pgoff(addr, len, prot, flags, fd, + pgoff >> (PAGE_SHIFT - 12)); } asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long off) { - return do_mmap2(addr, len, prot, flags, fd, off >> PAGE_SHIFT); + /* no alignment check? */ + return sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); } long sparc_remap_file_pages(unsigned long start, unsigned long size, @@ -287,27 +256,6 @@ long sparc_remap_file_pages(unsigned long start, unsigned long size, (pgoff >> (PAGE_SHIFT - 12)), flags); } -extern unsigned long do_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr); - -asmlinkage unsigned long sparc_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr) -{ - unsigned long ret = -EINVAL; - - if (unlikely(sparc_mmap_check(addr, old_len))) - goto out; - if (unlikely(sparc_mmap_check(new_addr, new_len))) - goto out; - down_write(¤t->mm->mmap_sem); - ret = do_mremap(addr, old_len, new_len, flags, new_addr); - up_write(¤t->mm->mmap_sem); -out: - return ret; -} - /* we come to here via sys_nis_syscall so it can setup the regs argument */ asmlinkage unsigned long c_sys_nis_syscall (struct pt_regs *regs) diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index e2d102447a43..cfa0e19abe3b 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -317,10 +317,14 @@ bottomup: unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, unsigned long len, unsigned long pgoff, unsigned long flags) { unsigned long align_goal, addr = -ENOMEM; + unsigned long (*get_area)(struct file *, unsigned long, + unsigned long, unsigned long, unsigned long); + + get_area = current->mm->get_unmapped_area; if (flags & MAP_FIXED) { /* Ok, don't mess with it. */ - return get_unmapped_area(NULL, orig_addr, len, pgoff, flags); + return get_area(NULL, orig_addr, len, pgoff, flags); } flags &= ~MAP_SHARED; @@ -333,7 +337,7 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u align_goal = (64UL * 1024); do { - addr = get_unmapped_area(NULL, orig_addr, len + (align_goal - PAGE_SIZE), pgoff, flags); + addr = get_area(NULL, orig_addr, len + (align_goal - PAGE_SIZE), pgoff, flags); if (!(addr & ~PAGE_MASK)) { addr = (addr + (align_goal - 1UL)) & ~(align_goal - 1UL); break; @@ -351,7 +355,7 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u * be obtained. */ if (addr & ~PAGE_MASK) - addr = get_unmapped_area(NULL, orig_addr, len, pgoff, flags); + addr = get_area(NULL, orig_addr, len, pgoff, flags); return addr; } @@ -399,18 +403,6 @@ void arch_pick_mmap_layout(struct mm_struct *mm) } } -SYSCALL_DEFINE1(sparc_brk, unsigned long, brk) -{ - /* People could try to be nasty and use ta 0x6d in 32bit programs */ - if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32) - return current->mm->brk; - - if (unlikely(straddles_64bit_va_hole(current->mm->brk, brk))) - return current->mm->brk; - - return sys_brk(brk); -} - /* * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. @@ -568,23 +560,13 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, off) { - struct file * file = NULL; - unsigned long retval = -EBADF; - - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - len = PAGE_ALIGN(len); + unsigned long retval = -EINVAL; - down_write(¤t->mm->mmap_sem); - retval = do_mmap(file, addr, len, prot, flags, off); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); + if ((off + PAGE_ALIGN(len)) < off) + goto out; + if (off & ~PAGE_MASK) + goto out; + retval = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); out: return retval; } @@ -614,12 +596,6 @@ SYSCALL_DEFINE5(64_mremap, unsigned long, addr, unsigned long, old_len, if (test_thread_flag(TIF_32BIT)) goto out; - if (unlikely(new_len >= VA_EXCLUDE_START)) - goto out; - if (unlikely(sparc_mmap_check(addr, old_len))) - goto out; - if (unlikely(sparc_mmap_check(new_addr, new_len))) - goto out; down_write(¤t->mm->mmap_sem); ret = do_mremap(addr, old_len, new_len, flags, new_addr); diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h index a63c5d2d9849..d2f999ae2b85 100644 --- a/arch/sparc/kernel/systbls.h +++ b/arch/sparc/kernel/systbls.h @@ -9,7 +9,6 @@ struct new_utsname; extern asmlinkage unsigned long sys_getpagesize(void); -extern asmlinkage unsigned long sparc_brk(unsigned long brk); extern asmlinkage long sparc_pipe(struct pt_regs *regs); extern asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index ceb1530f8aa6..801fc8e5a0e8 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -19,7 +19,7 @@ sys_call_table: /*0*/ .long sys_restart_syscall, sys_exit, sys_fork, sys_read, sys_write /*5*/ .long sys_open, sys_close, sys_wait4, sys_creat, sys_link /*10*/ .long sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys_mknod -/*15*/ .long sys_chmod, sys_lchown16, sparc_brk, sys_nis_syscall, sys_lseek +/*15*/ .long sys_chmod, sys_lchown16, sys_brk, sys_nis_syscall, sys_lseek /*20*/ .long sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 /*25*/ .long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause /*30*/ .long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice @@ -67,7 +67,7 @@ sys_call_table: /*235*/ .long sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall /*240*/ .long sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler /*245*/ .long sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep -/*250*/ .long sparc_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl +/*250*/ .long sys_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl /*255*/ .long sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep /*260*/ .long sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun /*265*/ .long sys_timer_delete, sys_timer_create, sys_nis_syscall, sys_io_setup, sys_io_destroy diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index cc8e7862e95a..e575b46bd7a9 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -21,7 +21,7 @@ sys_call_table32: /*0*/ .word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write /*5*/ .word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link /*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod -/*15*/ .word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek +/*15*/ .word sys_chmod, sys_lchown16, sys_brk, sys32_perfctr, sys32_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 /*25*/ .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause /*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice @@ -68,7 +68,7 @@ sys_call_table32: .word compat_sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys32_mlockall /*240*/ .word sys_munlockall, sys32_sched_setparam, sys32_sched_getparam, sys32_sched_setscheduler, sys32_sched_getscheduler .word sys_sched_yield, sys32_sched_get_priority_max, sys32_sched_get_priority_min, sys32_sched_rr_get_interval, compat_sys_nanosleep -/*250*/ .word sys32_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl +/*250*/ .word sys_mremap, compat_sys_sysctl, sys32_getsid, sys_fdatasync, sys32_nfsservctl .word sys32_sync_file_range, compat_sys_clock_settime, compat_sys_clock_gettime, compat_sys_clock_getres, sys32_clock_nanosleep /*260*/ .word compat_sys_sched_getaffinity, compat_sys_sched_setaffinity, sys32_timer_settime, compat_sys_timer_gettime, sys_timer_getoverrun .word sys_timer_delete, compat_sys_timer_create, sys_ni_syscall, compat_sys_io_setup, sys_io_destroy @@ -96,7 +96,7 @@ sys_call_table: /*0*/ .word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write /*5*/ .word sys_open, sys_close, sys_wait4, sys_creat, sys_link /*10*/ .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod -/*15*/ .word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek +/*15*/ .word sys_chmod, sys_lchown, sys_brk, sys_perfctr, sys_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid /*25*/ .word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall /*30*/ .word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice diff --git a/arch/um/kernel/syscall.c b/arch/um/kernel/syscall.c index a4625c7b2bf9..cccab850c27e 100644 --- a/arch/um/kernel/syscall.c +++ b/arch/um/kernel/syscall.c @@ -8,6 +8,7 @@ #include "linux/mm.h" #include "linux/sched.h" #include "linux/utsname.h" +#include "linux/syscalls.h" #include "asm/current.h" #include "asm/mman.h" #include "asm/uaccess.h" @@ -37,31 +38,6 @@ long sys_vfork(void) return ret; } -/* common code for old and new mmaps */ -long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - long error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); - out: - return error; -} - long old_mmap(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long offset) @@ -70,7 +46,7 @@ long old_mmap(unsigned long addr, unsigned long len, if (offset & ~PAGE_MASK) goto out; - err = sys_mmap2(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); + err = sys_mmap_pgoff(addr, len, prot, flags, fd, offset >> PAGE_SHIFT); out: return err; } diff --git a/arch/um/sys-i386/shared/sysdep/syscalls.h b/arch/um/sys-i386/shared/sysdep/syscalls.h index 905698197e35..e7787679e317 100644 --- a/arch/um/sys-i386/shared/sysdep/syscalls.h +++ b/arch/um/sys-i386/shared/sysdep/syscalls.h @@ -20,7 +20,3 @@ extern syscall_handler_t *sys_call_table[]; #define EXECUTE_SYSCALL(syscall, regs) \ ((long (*)(struct syscall_args)) \ (*sys_call_table[syscall]))(SYSCALL_ARGS(®s->regs)) - -extern long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff); diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 731318e5ac1d..bc01e3ebfeb2 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -187,8 +187,8 @@ config HAVE_MMIOTRACE_SUPPORT def_bool y config X86_DECODER_SELFTEST - bool "x86 instruction decoder selftest" - depends on DEBUG_KERNEL + bool "x86 instruction decoder selftest" + depends on DEBUG_KERNEL && KPROBES ---help--- Perform x86 instruction decoder selftests at build time. This option is useful for checking the sanity of x86 instruction diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 4eefdca9832b..53147ad85b96 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -696,7 +696,7 @@ ia32_sys_call_table: .quad quiet_ni_syscall /* streams2 */ .quad stub32_vfork /* 190 */ .quad compat_sys_getrlimit - .quad sys32_mmap2 + .quad sys_mmap_pgoff .quad sys32_truncate64 .quad sys32_ftruncate64 .quad sys32_stat64 /* 195 */ diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c index df82c0e48ded..422572c77923 100644 --- a/arch/x86/ia32/sys_ia32.c +++ b/arch/x86/ia32/sys_ia32.c @@ -155,9 +155,6 @@ struct mmap_arg_struct { asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg) { struct mmap_arg_struct a; - struct file *file = NULL; - unsigned long retval; - struct mm_struct *mm ; if (copy_from_user(&a, arg, sizeof(a))) return -EFAULT; @@ -165,22 +162,8 @@ asmlinkage long sys32_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) return -EINVAL; - if (!(a.flags & MAP_ANONYMOUS)) { - file = fget(a.fd); - if (!file) - return -EBADF; - } - - mm = current->mm; - down_write(&mm->mmap_sem); - retval = do_mmap_pgoff(file, a.addr, a.len, a.prot, a.flags, + return sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset>>PAGE_SHIFT); - if (file) - fput(file); - - up_write(&mm->mmap_sem); - - return retval; } asmlinkage long sys32_mprotect(unsigned long start, size_t len, @@ -483,30 +466,6 @@ asmlinkage long sys32_sendfile(int out_fd, int in_fd, return ret; } -asmlinkage long sys32_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - struct mm_struct *mm = current->mm; - unsigned long error; - struct file *file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - return -EBADF; - } - - down_write(&mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(&mm->mmap_sem); - - if (file) - fput(file); - return error; -} - asmlinkage long sys32_olduname(struct oldold_utsname __user *name) { char *arch = "x86_64"; diff --git a/arch/x86/include/asm/amd_iommu_proto.h b/arch/x86/include/asm/amd_iommu_proto.h index 84786fb9a23b..4d817f9e6e77 100644 --- a/arch/x86/include/asm/amd_iommu_proto.h +++ b/arch/x86/include/asm/amd_iommu_proto.h @@ -28,7 +28,9 @@ extern void amd_iommu_flush_all_domains(void); extern void amd_iommu_flush_all_devices(void); extern void amd_iommu_apply_erratum_63(u16 devid); extern void amd_iommu_reset_cmd_buffer(struct amd_iommu *iommu); - +extern int amd_iommu_init_devices(void); +extern void amd_iommu_uninit_devices(void); +extern void amd_iommu_init_notifier(void); #ifndef CONFIG_AMD_IOMMU_STATS static inline void amd_iommu_stats_init(void) { } diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index 6a635bd39867..4611f085cd43 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -113,7 +113,7 @@ */ #define LOCAL_PENDING_VECTOR 0xec -#define UV_BAU_MESSAGE 0xec +#define UV_BAU_MESSAGE 0xea /* * Self IPI vector for machine checks diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h index 5bef931f8b14..2d228fc9b4b7 100644 --- a/arch/x86/include/asm/msr.h +++ b/arch/x86/include/asm/msr.h @@ -244,6 +244,9 @@ do { \ #define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0) +struct msr *msrs_alloc(void); +void msrs_free(struct msr *msrs); + #ifdef CONFIG_SMP int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h); int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h); diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h index b399988eee3a..b4bf9a942ed0 100644 --- a/arch/x86/include/asm/pci_x86.h +++ b/arch/x86/include/asm/pci_x86.h @@ -118,11 +118,27 @@ extern int __init pcibios_init(void); /* pci-mmconfig.c */ +/* "PCI MMCONFIG %04x [bus %02x-%02x]" */ +#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2) + +struct pci_mmcfg_region { + struct list_head list; + struct resource res; + u64 address; + char __iomem *virt; + u16 segment; + u8 start_bus; + u8 end_bus; + char name[PCI_MMCFG_RESOURCE_NAME_LEN]; +}; + extern int __init pci_mmcfg_arch_init(void); extern void __init pci_mmcfg_arch_free(void); +extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus); + +extern struct list_head pci_mmcfg_list; -extern struct acpi_mcfg_allocation *pci_mmcfg_config; -extern int pci_mmcfg_config_num; +#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20) /* * AMD Fam10h CPUs are buggy, and cannot access MMIO config space diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index b65a36defeb7..0c44196b78ac 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -74,31 +74,31 @@ extern void __bad_percpu_size(void); #define percpu_to_op(op, var, val) \ do { \ - typedef typeof(var) T__; \ + typedef typeof(var) pto_T__; \ if (0) { \ - T__ tmp__; \ - tmp__ = (val); \ + pto_T__ pto_tmp__; \ + pto_tmp__ = (val); \ } \ switch (sizeof(var)) { \ case 1: \ asm(op "b %1,"__percpu_arg(0) \ : "+m" (var) \ - : "qi" ((T__)(val))); \ + : "qi" ((pto_T__)(val))); \ break; \ case 2: \ asm(op "w %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)(val))); \ + : "ri" ((pto_T__)(val))); \ break; \ case 4: \ asm(op "l %1,"__percpu_arg(0) \ : "+m" (var) \ - : "ri" ((T__)(val))); \ + : "ri" ((pto_T__)(val))); \ break; \ case 8: \ asm(op "q %1,"__percpu_arg(0) \ : "+m" (var) \ - : "re" ((T__)(val))); \ + : "re" ((pto_T__)(val))); \ break; \ default: __bad_percpu_size(); \ } \ @@ -106,31 +106,31 @@ do { \ #define percpu_from_op(op, var, constraint) \ ({ \ - typeof(var) ret__; \ + typeof(var) pfo_ret__; \ switch (sizeof(var)) { \ case 1: \ asm(op "b "__percpu_arg(1)",%0" \ - : "=q" (ret__) \ + : "=q" (pfo_ret__) \ : constraint); \ break; \ case 2: \ asm(op "w "__percpu_arg(1)",%0" \ - : "=r" (ret__) \ + : "=r" (pfo_ret__) \ : constraint); \ break; \ case 4: \ asm(op "l "__percpu_arg(1)",%0" \ - : "=r" (ret__) \ + : "=r" (pfo_ret__) \ : constraint); \ break; \ case 8: \ asm(op "q "__percpu_arg(1)",%0" \ - : "=r" (ret__) \ + : "=r" (pfo_ret__) \ : constraint); \ break; \ default: __bad_percpu_size(); \ } \ - ret__; \ + pfo_ret__; \ }) /* @@ -153,6 +153,84 @@ do { \ #define percpu_or(var, val) percpu_to_op("or", per_cpu__##var, val) #define percpu_xor(var, val) percpu_to_op("xor", per_cpu__##var, val) +#define __this_cpu_read_1(pcp) percpu_from_op("mov", (pcp), "m"(pcp)) +#define __this_cpu_read_2(pcp) percpu_from_op("mov", (pcp), "m"(pcp)) +#define __this_cpu_read_4(pcp) percpu_from_op("mov", (pcp), "m"(pcp)) + +#define __this_cpu_write_1(pcp, val) percpu_to_op("mov", (pcp), val) +#define __this_cpu_write_2(pcp, val) percpu_to_op("mov", (pcp), val) +#define __this_cpu_write_4(pcp, val) percpu_to_op("mov", (pcp), val) +#define __this_cpu_add_1(pcp, val) percpu_to_op("add", (pcp), val) +#define __this_cpu_add_2(pcp, val) percpu_to_op("add", (pcp), val) +#define __this_cpu_add_4(pcp, val) percpu_to_op("add", (pcp), val) +#define __this_cpu_and_1(pcp, val) percpu_to_op("and", (pcp), val) +#define __this_cpu_and_2(pcp, val) percpu_to_op("and", (pcp), val) +#define __this_cpu_and_4(pcp, val) percpu_to_op("and", (pcp), val) +#define __this_cpu_or_1(pcp, val) percpu_to_op("or", (pcp), val) +#define __this_cpu_or_2(pcp, val) percpu_to_op("or", (pcp), val) +#define __this_cpu_or_4(pcp, val) percpu_to_op("or", (pcp), val) +#define __this_cpu_xor_1(pcp, val) percpu_to_op("xor", (pcp), val) +#define __this_cpu_xor_2(pcp, val) percpu_to_op("xor", (pcp), val) +#define __this_cpu_xor_4(pcp, val) percpu_to_op("xor", (pcp), val) + +#define this_cpu_read_1(pcp) percpu_from_op("mov", (pcp), "m"(pcp)) +#define this_cpu_read_2(pcp) percpu_from_op("mov", (pcp), "m"(pcp)) +#define this_cpu_read_4(pcp) percpu_from_op("mov", (pcp), "m"(pcp)) +#define this_cpu_write_1(pcp, val) percpu_to_op("mov", (pcp), val) +#define this_cpu_write_2(pcp, val) percpu_to_op("mov", (pcp), val) +#define this_cpu_write_4(pcp, val) percpu_to_op("mov", (pcp), val) +#define this_cpu_add_1(pcp, val) percpu_to_op("add", (pcp), val) +#define this_cpu_add_2(pcp, val) percpu_to_op("add", (pcp), val) +#define this_cpu_add_4(pcp, val) percpu_to_op("add", (pcp), val) +#define this_cpu_and_1(pcp, val) percpu_to_op("and", (pcp), val) +#define this_cpu_and_2(pcp, val) percpu_to_op("and", (pcp), val) +#define this_cpu_and_4(pcp, val) percpu_to_op("and", (pcp), val) +#define this_cpu_or_1(pcp, val) percpu_to_op("or", (pcp), val) +#define this_cpu_or_2(pcp, val) percpu_to_op("or", (pcp), val) +#define this_cpu_or_4(pcp, val) percpu_to_op("or", (pcp), val) +#define this_cpu_xor_1(pcp, val) percpu_to_op("xor", (pcp), val) +#define this_cpu_xor_2(pcp, val) percpu_to_op("xor", (pcp), val) +#define this_cpu_xor_4(pcp, val) percpu_to_op("xor", (pcp), val) + +#define irqsafe_cpu_add_1(pcp, val) percpu_to_op("add", (pcp), val) +#define irqsafe_cpu_add_2(pcp, val) percpu_to_op("add", (pcp), val) +#define irqsafe_cpu_add_4(pcp, val) percpu_to_op("add", (pcp), val) +#define irqsafe_cpu_and_1(pcp, val) percpu_to_op("and", (pcp), val) +#define irqsafe_cpu_and_2(pcp, val) percpu_to_op("and", (pcp), val) +#define irqsafe_cpu_and_4(pcp, val) percpu_to_op("and", (pcp), val) +#define irqsafe_cpu_or_1(pcp, val) percpu_to_op("or", (pcp), val) +#define irqsafe_cpu_or_2(pcp, val) percpu_to_op("or", (pcp), val) +#define irqsafe_cpu_or_4(pcp, val) percpu_to_op("or", (pcp), val) +#define irqsafe_cpu_xor_1(pcp, val) percpu_to_op("xor", (pcp), val) +#define irqsafe_cpu_xor_2(pcp, val) percpu_to_op("xor", (pcp), val) +#define irqsafe_cpu_xor_4(pcp, val) percpu_to_op("xor", (pcp), val) + +/* + * Per cpu atomic 64 bit operations are only available under 64 bit. + * 32 bit must fall back to generic operations. + */ +#ifdef CONFIG_X86_64 +#define __this_cpu_read_8(pcp) percpu_from_op("mov", (pcp), "m"(pcp)) +#define __this_cpu_write_8(pcp, val) percpu_to_op("mov", (pcp), val) +#define __this_cpu_add_8(pcp, val) percpu_to_op("add", (pcp), val) +#define __this_cpu_and_8(pcp, val) percpu_to_op("and", (pcp), val) +#define __this_cpu_or_8(pcp, val) percpu_to_op("or", (pcp), val) +#define __this_cpu_xor_8(pcp, val) percpu_to_op("xor", (pcp), val) + +#define this_cpu_read_8(pcp) percpu_from_op("mov", (pcp), "m"(pcp)) +#define this_cpu_write_8(pcp, val) percpu_to_op("mov", (pcp), val) +#define this_cpu_add_8(pcp, val) percpu_to_op("add", (pcp), val) +#define this_cpu_and_8(pcp, val) percpu_to_op("and", (pcp), val) +#define this_cpu_or_8(pcp, val) percpu_to_op("or", (pcp), val) +#define this_cpu_xor_8(pcp, val) percpu_to_op("xor", (pcp), val) + +#define irqsafe_cpu_add_8(pcp, val) percpu_to_op("add", (pcp), val) +#define irqsafe_cpu_and_8(pcp, val) percpu_to_op("and", (pcp), val) +#define irqsafe_cpu_or_8(pcp, val) percpu_to_op("or", (pcp), val) +#define irqsafe_cpu_xor_8(pcp, val) percpu_to_op("xor", (pcp), val) + +#endif + /* This is not atomic against other CPUs -- CPU preemption needs to be off */ #define x86_test_and_clear_bit_percpu(bit, var) \ ({ \ diff --git a/arch/x86/include/asm/sys_ia32.h b/arch/x86/include/asm/sys_ia32.h index 9af9decb38c3..4a5a089e1c62 100644 --- a/arch/x86/include/asm/sys_ia32.h +++ b/arch/x86/include/asm/sys_ia32.h @@ -57,9 +57,6 @@ asmlinkage long sys32_pwrite(unsigned int, char __user *, u32, u32, u32); asmlinkage long sys32_personality(unsigned long); asmlinkage long sys32_sendfile(int, int, compat_off_t __user *, s32); -asmlinkage long sys32_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, unsigned long); - struct oldold_utsname; struct old_utsname; asmlinkage long sys32_olduname(struct oldold_utsname __user *); diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h index 372b76edd63f..1bb6e395881c 100644 --- a/arch/x86/include/asm/syscalls.h +++ b/arch/x86/include/asm/syscalls.h @@ -55,8 +55,6 @@ struct sel_arg_struct; struct oldold_utsname; struct old_utsname; -asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, unsigned long); asmlinkage int old_mmap(struct mmap_arg_struct __user *); asmlinkage int old_select(struct sel_arg_struct __user *); asmlinkage int sys_ipc(uint, int, int, int, void __user *, long); diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index 022a84386de8..ecb544e65382 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -23,6 +23,7 @@ struct task_struct *__switch_to(struct task_struct *prev, struct tss_struct; void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p, struct tss_struct *tss); +extern void show_regs_common(void); #ifdef CONFIG_X86_32 diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h index 90f06c25221d..cb507bb05d79 100644 --- a/arch/x86/include/asm/trampoline.h +++ b/arch/x86/include/asm/trampoline.h @@ -16,7 +16,6 @@ extern unsigned long initial_code; extern unsigned long initial_gs; #define TRAMPOLINE_SIZE roundup(trampoline_end - trampoline_data, PAGE_SIZE) -#define TRAMPOLINE_BASE 0x6000 extern unsigned long setup_trampoline(void); extern void __init reserve_trampoline_memory(void); diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h index d5b7e90c0edf..396ff4cc8ed4 100644 --- a/arch/x86/include/asm/xen/hypervisor.h +++ b/arch/x86/include/asm/xen/hypervisor.h @@ -37,31 +37,4 @@ extern struct shared_info *HYPERVISOR_shared_info; extern struct start_info *xen_start_info; -enum xen_domain_type { - XEN_NATIVE, /* running on bare hardware */ - XEN_PV_DOMAIN, /* running in a PV domain */ - XEN_HVM_DOMAIN, /* running in a Xen hvm domain */ -}; - -#ifdef CONFIG_XEN -extern enum xen_domain_type xen_domain_type; -#else -#define xen_domain_type XEN_NATIVE -#endif - -#define xen_domain() (xen_domain_type != XEN_NATIVE) -#define xen_pv_domain() (xen_domain() && \ - xen_domain_type == XEN_PV_DOMAIN) -#define xen_hvm_domain() (xen_domain() && \ - xen_domain_type == XEN_HVM_DOMAIN) - -#ifdef CONFIG_XEN_DOM0 -#include <xen/interface/xen.h> - -#define xen_initial_domain() (xen_pv_domain() && \ - xen_start_info->flags & SIF_INITDOMAIN) -#else /* !CONFIG_XEN_DOM0 */ -#define xen_initial_domain() (0) -#endif /* CONFIG_XEN_DOM0 */ - #endif /* _ASM_X86_XEN_HYPERVISOR_H */ diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 1c0fb4d4ad55..b990b5cc9541 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -166,6 +166,43 @@ static void iommu_uninit_device(struct device *dev) { kfree(dev->archdata.iommu); } + +void __init amd_iommu_uninit_devices(void) +{ + struct pci_dev *pdev = NULL; + + for_each_pci_dev(pdev) { + + if (!check_device(&pdev->dev)) + continue; + + iommu_uninit_device(&pdev->dev); + } +} + +int __init amd_iommu_init_devices(void) +{ + struct pci_dev *pdev = NULL; + int ret = 0; + + for_each_pci_dev(pdev) { + + if (!check_device(&pdev->dev)) + continue; + + ret = iommu_init_device(&pdev->dev); + if (ret) + goto out_free; + } + + return 0; + +out_free: + + amd_iommu_uninit_devices(); + + return ret; +} #ifdef CONFIG_AMD_IOMMU_STATS /* @@ -1587,6 +1624,11 @@ static struct notifier_block device_nb = { .notifier_call = device_change_notifier, }; +void amd_iommu_init_notifier(void) +{ + bus_register_notifier(&pci_bus_type, &device_nb); +} + /***************************************************************************** * * The next functions belong to the dma_ops mapping/unmapping code. @@ -2145,8 +2187,6 @@ static void prealloc_protection_domains(void) if (!check_device(&dev->dev)) continue; - iommu_init_device(&dev->dev); - /* Is there already any domain for it? */ if (domain_for_device(&dev->dev)) continue; @@ -2215,8 +2255,6 @@ int __init amd_iommu_init_dma_ops(void) register_iommu(&amd_iommu_ops); - bus_register_notifier(&pci_bus_type, &device_nb); - amd_iommu_stats_init(); return 0; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 7ffc39965233..1dca9c34eaeb 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -1274,6 +1274,10 @@ static int __init amd_iommu_init(void) if (ret) goto free; + ret = amd_iommu_init_devices(); + if (ret) + goto free; + if (iommu_pass_through) ret = amd_iommu_init_passthrough(); else @@ -1281,6 +1285,8 @@ static int __init amd_iommu_init(void) if (ret) goto free; + amd_iommu_init_notifier(); + enable_iommus(); if (iommu_pass_through) @@ -1296,6 +1302,9 @@ out: return ret; free: + + amd_iommu_uninit_devices(); + free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, get_order(MAX_DOMAIN_ID/8)); @@ -1336,6 +1345,9 @@ void __init amd_iommu_detect(void) iommu_detected = 1; amd_iommu_detected = 1; x86_init.iommu.iommu_init = amd_iommu_init; + + /* Make sure ACS will be enabled */ + pci_request_acs(); } } diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c index e0dfb6856aa2..3704997e8b25 100644 --- a/arch/x86/kernel/aperture_64.c +++ b/arch/x86/kernel/aperture_64.c @@ -280,7 +280,8 @@ void __init early_gart_iommu_check(void) * or BIOS forget to put that in reserved. * try to update e820 to make that region as reserved. */ - int i, fix, slot; + u32 agp_aper_base = 0, agp_aper_order = 0; + int i, fix, slot, valid_agp = 0; u32 ctl; u32 aper_size = 0, aper_order = 0, last_aper_order = 0; u64 aper_base = 0, last_aper_base = 0; @@ -290,6 +291,8 @@ void __init early_gart_iommu_check(void) return; /* This is mostly duplicate of iommu_hole_init */ + agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp); + fix = 0; for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { int bus; @@ -342,10 +345,10 @@ void __init early_gart_iommu_check(void) } } - if (!fix) + if (valid_agp) return; - /* different nodes have different setting, disable them all at first*/ + /* disable them all at first */ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) { int bus; int dev_base, dev_limit; @@ -458,8 +461,6 @@ out: if (aper_alloc) { /* Got the aperture from the AGP bridge */ - } else if (!valid_agp) { - /* Do nothing */ } else if ((!no_iommu && max_pfn > MAX_DMA32_PFN) || force_iommu || valid_agp || diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index efb2b9cd132c..aa57c079c98f 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1341,7 +1341,7 @@ void enable_x2apic(void) rdmsr(MSR_IA32_APICBASE, msr, msr2); if (!(msr & X2APIC_ENABLE)) { - pr_info("Enabling x2apic\n"); + printk_once(KERN_INFO "Enabling x2apic\n"); wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0); } } diff --git a/arch/x86/kernel/apic/apic_noop.c b/arch/x86/kernel/apic/apic_noop.c index d9acc3bee0f4..e31b9ffe25f5 100644 --- a/arch/x86/kernel/apic/apic_noop.c +++ b/arch/x86/kernel/apic/apic_noop.c @@ -127,7 +127,7 @@ static u32 noop_apic_read(u32 reg) static void noop_apic_write(u32 reg, u32 v) { - WARN_ON_ONCE((cpu_has_apic || !disable_apic)); + WARN_ON_ONCE(cpu_has_apic && !disable_apic); } struct apic apic_noop = { diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c index e85f8fb7f8e7..dd2b5f264643 100644 --- a/arch/x86/kernel/apic/es7000_32.c +++ b/arch/x86/kernel/apic/es7000_32.c @@ -27,6 +27,9 @@ * * http://www.unisys.com */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/notifier.h> #include <linux/spinlock.h> #include <linux/cpumask.h> @@ -223,9 +226,9 @@ static int parse_unisys_oem(char *oemptr) mip_addr = val; mip = (struct mip_reg *)val; mip_reg = __va(mip); - pr_debug("es7000_mipcfg: host_reg = 0x%lx \n", + pr_debug("host_reg = 0x%lx\n", (unsigned long)host_reg); - pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n", + pr_debug("mip_reg = 0x%lx\n", (unsigned long)mip_reg); success++; break; @@ -401,7 +404,7 @@ static void es7000_enable_apic_mode(void) if (!es7000_plat) return; - printk(KERN_INFO "ES7000: Enabling APIC mode.\n"); + pr_info("Enabling APIC mode.\n"); memset(&es7000_mip_reg, 0, sizeof(struct mip_reg)); es7000_mip_reg.off_0x00 = MIP_SW_APIC; es7000_mip_reg.off_0x38 = MIP_VALID; @@ -514,8 +517,7 @@ static void es7000_setup_apic_routing(void) { int apic = per_cpu(x86_bios_cpu_apicid, smp_processor_id()); - printk(KERN_INFO - "Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", + pr_info("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n", (apic_version[apic] == 0x14) ? "Physical Cluster" : "Logical Cluster", nr_ioapics, cpumask_bits(es7000_target_cpus())[0]); diff --git a/arch/x86/kernel/apic/nmi.c b/arch/x86/kernel/apic/nmi.c index 6389432a9dbf..0159a69396cb 100644 --- a/arch/x86/kernel/apic/nmi.c +++ b/arch/x86/kernel/apic/nmi.c @@ -361,7 +361,7 @@ void stop_apic_nmi_watchdog(void *unused) */ static DEFINE_PER_CPU(unsigned, last_irq_sum); -static DEFINE_PER_CPU(local_t, alert_counter); +static DEFINE_PER_CPU(long, alert_counter); static DEFINE_PER_CPU(int, nmi_touch); void touch_nmi_watchdog(void) @@ -438,8 +438,8 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) * Ayiee, looks like this CPU is stuck ... * wait a few IRQs (5 seconds) before doing the oops ... */ - local_inc(&__get_cpu_var(alert_counter)); - if (local_read(&__get_cpu_var(alert_counter)) == 5 * nmi_hz) + __this_cpu_inc(per_cpu_var(alert_counter)); + if (__this_cpu_read(per_cpu_var(alert_counter)) == 5 * nmi_hz) /* * die_nmi will return ONLY if NOTIFY_STOP happens.. */ @@ -447,7 +447,7 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason) regs, panic_on_timeout); } else { __get_cpu_var(last_irq_sum) = sum; - local_set(&__get_cpu_var(alert_counter), 0); + __this_cpu_write(per_cpu_var(alert_counter), 0); } /* see if the nmi watchdog went off */ diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index c965e5212714..468489b57aae 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -74,6 +74,7 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c) unsigned int eax, ebx, ecx, edx, sub_index; unsigned int ht_mask_width, core_plus_mask_width; unsigned int core_select_mask, core_level_siblings; + static bool printed; if (c->cpuid_level < 0xb) return; @@ -127,12 +128,14 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c) c->x86_max_cores = (core_level_siblings / smp_num_siblings); - - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - if (c->x86_max_cores > 1) - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); + if (!printed) { + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + if (c->x86_max_cores > 1) + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + printed = 1; + } return; #endif } diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 7128b3799cec..8dc3ea145c97 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -375,8 +375,6 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) node = nearby_node(apicid); } numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node); #endif } diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c1afa990a6c8..4868e4a951ee 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -427,6 +427,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_HT u32 eax, ebx, ecx, edx; int index_msb, core_bits; + static bool printed; if (!cpu_has(c, X86_FEATURE_HT)) return; @@ -442,7 +443,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) smp_num_siblings = (ebx & 0xff0000) >> 16; if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); + printk_once(KERN_INFO "CPU0: Hyper-Threading is disabled\n"); goto out; } @@ -469,11 +470,12 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) ((1 << core_bits) - 1); out: - if ((c->x86_max_cores * smp_num_siblings) > 1) { + if (!printed && (c->x86_max_cores * smp_num_siblings) > 1) { printk(KERN_INFO "CPU: Physical Processor ID: %d\n", c->phys_proc_id); printk(KERN_INFO "CPU: Processor Core ID: %d\n", c->cpu_core_id); + printed = 1; } #endif } @@ -1093,7 +1095,7 @@ static void clear_all_debug_regs(void) void __cpuinit cpu_init(void) { - struct orig_ist *orig_ist; + struct orig_ist *oist; struct task_struct *me; struct tss_struct *t; unsigned long v; @@ -1102,7 +1104,7 @@ void __cpuinit cpu_init(void) cpu = stack_smp_processor_id(); t = &per_cpu(init_tss, cpu); - orig_ist = &per_cpu(orig_ist, cpu); + oist = &per_cpu(orig_ist, cpu); #ifdef CONFIG_NUMA if (cpu != 0 && percpu_read(node_number) == 0 && @@ -1115,7 +1117,7 @@ void __cpuinit cpu_init(void) if (cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)) panic("CPU#%d already initialized!\n", cpu); - printk(KERN_INFO "Initializing CPU#%d\n", cpu); + pr_debug("Initializing CPU#%d\n", cpu); clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); @@ -1143,12 +1145,12 @@ void __cpuinit cpu_init(void) /* * set up and load the per-CPU TSS */ - if (!orig_ist->ist[0]) { + if (!oist->ist[0]) { char *estacks = per_cpu(exception_stacks, cpu); for (v = 0; v < N_EXCEPTION_STACKS; v++) { estacks += exception_stack_sizes[v]; - orig_ist->ist[v] = t->x86_tss.ist[v] = + oist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks; } } diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c index dca325c03999..b368cd862997 100644 --- a/arch/x86/kernel/cpu/cpu_debug.c +++ b/arch/x86/kernel/cpu/cpu_debug.c @@ -30,9 +30,9 @@ #include <asm/apic.h> #include <asm/desc.h> -static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpu_arr); -static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], priv_arr); -static DEFINE_PER_CPU(int, cpu_priv_count); +static DEFINE_PER_CPU(struct cpu_cpuX_base [CPU_REG_ALL_BIT], cpud_arr); +static DEFINE_PER_CPU(struct cpu_private * [MAX_CPU_FILES], cpud_priv_arr); +static DEFINE_PER_CPU(int, cpud_priv_count); static DEFINE_MUTEX(cpu_debug_lock); @@ -531,7 +531,7 @@ static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg, /* Already intialized */ if (file == CPU_INDEX_BIT) - if (per_cpu(cpu_arr[type].init, cpu)) + if (per_cpu(cpud_arr[type].init, cpu)) return 0; priv = kzalloc(sizeof(*priv), GFP_KERNEL); @@ -543,8 +543,8 @@ static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg, priv->reg = reg; priv->file = file; mutex_lock(&cpu_debug_lock); - per_cpu(priv_arr[type], cpu) = priv; - per_cpu(cpu_priv_count, cpu)++; + per_cpu(cpud_priv_arr[type], cpu) = priv; + per_cpu(cpud_priv_count, cpu)++; mutex_unlock(&cpu_debug_lock); if (file) @@ -552,10 +552,10 @@ static int cpu_create_file(unsigned cpu, unsigned type, unsigned reg, dentry, (void *)priv, &cpu_fops); else { debugfs_create_file(cpu_base[type].name, S_IRUGO, - per_cpu(cpu_arr[type].dentry, cpu), + per_cpu(cpud_arr[type].dentry, cpu), (void *)priv, &cpu_fops); mutex_lock(&cpu_debug_lock); - per_cpu(cpu_arr[type].init, cpu) = 1; + per_cpu(cpud_arr[type].init, cpu) = 1; mutex_unlock(&cpu_debug_lock); } @@ -615,7 +615,7 @@ static int cpu_init_allreg(unsigned cpu, struct dentry *dentry) if (!is_typeflag_valid(cpu, cpu_base[type].flag)) continue; cpu_dentry = debugfs_create_dir(cpu_base[type].name, dentry); - per_cpu(cpu_arr[type].dentry, cpu) = cpu_dentry; + per_cpu(cpud_arr[type].dentry, cpu) = cpu_dentry; if (type < CPU_TSS_BIT) err = cpu_init_msr(cpu, type, cpu_dentry); @@ -647,11 +647,11 @@ static int cpu_init_cpu(void) err = cpu_init_allreg(cpu, cpu_dentry); pr_info("cpu%d(%d) debug files %d\n", - cpu, nr_cpu_ids, per_cpu(cpu_priv_count, cpu)); - if (per_cpu(cpu_priv_count, cpu) > MAX_CPU_FILES) { + cpu, nr_cpu_ids, per_cpu(cpud_priv_count, cpu)); + if (per_cpu(cpud_priv_count, cpu) > MAX_CPU_FILES) { pr_err("Register files count %d exceeds limit %d\n", - per_cpu(cpu_priv_count, cpu), MAX_CPU_FILES); - per_cpu(cpu_priv_count, cpu) = MAX_CPU_FILES; + per_cpu(cpud_priv_count, cpu), MAX_CPU_FILES); + per_cpu(cpud_priv_count, cpu) = MAX_CPU_FILES; err = -ENFILE; } if (err) @@ -676,8 +676,8 @@ static void __exit cpu_debug_exit(void) debugfs_remove_recursive(cpu_debugfs_dir); for (cpu = 0; cpu < nr_cpu_ids; cpu++) - for (i = 0; i < per_cpu(cpu_priv_count, cpu); i++) - kfree(per_cpu(priv_arr[i], cpu)); + for (i = 0; i < per_cpu(cpud_priv_count, cpu); i++) + kfree(per_cpu(cpud_priv_arr[i], cpu)); } module_init(cpu_debug_init); diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 8b581d3905cb..f28decf8dde3 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -68,9 +68,9 @@ struct acpi_cpufreq_data { unsigned int cpu_feature; }; -static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data); +static DEFINE_PER_CPU(struct acpi_cpufreq_data *, acfreq_data); -static DEFINE_PER_CPU(struct aperfmperf, old_perf); +static DEFINE_PER_CPU(struct aperfmperf, acfreq_old_perf); /* acpi_perf_data is a pointer to percpu data. */ static struct acpi_processor_performance *acpi_perf_data; @@ -214,14 +214,14 @@ static u32 get_cur_val(const struct cpumask *mask) if (unlikely(cpumask_empty(mask))) return 0; - switch (per_cpu(drv_data, cpumask_first(mask))->cpu_feature) { + switch (per_cpu(acfreq_data, cpumask_first(mask))->cpu_feature) { case SYSTEM_INTEL_MSR_CAPABLE: cmd.type = SYSTEM_INTEL_MSR_CAPABLE; cmd.addr.msr.reg = MSR_IA32_PERF_STATUS; break; case SYSTEM_IO_CAPABLE: cmd.type = SYSTEM_IO_CAPABLE; - perf = per_cpu(drv_data, cpumask_first(mask))->acpi_data; + perf = per_cpu(acfreq_data, cpumask_first(mask))->acpi_data; cmd.addr.io.port = perf->control_register.address; cmd.addr.io.bit_width = perf->control_register.bit_width; break; @@ -268,8 +268,8 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, if (smp_call_function_single(cpu, read_measured_perf_ctrs, &perf, 1)) return 0; - ratio = calc_aperfmperf_ratio(&per_cpu(old_perf, cpu), &perf); - per_cpu(old_perf, cpu) = perf; + ratio = calc_aperfmperf_ratio(&per_cpu(acfreq_old_perf, cpu), &perf); + per_cpu(acfreq_old_perf, cpu) = perf; retval = (policy->cpuinfo.max_freq * ratio) >> APERFMPERF_SHIFT; @@ -278,7 +278,7 @@ static unsigned int get_measured_perf(struct cpufreq_policy *policy, static unsigned int get_cur_freq_on_cpu(unsigned int cpu) { - struct acpi_cpufreq_data *data = per_cpu(drv_data, cpu); + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, cpu); unsigned int freq; unsigned int cached_freq; @@ -322,7 +322,7 @@ static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, static int acpi_cpufreq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { - struct acpi_cpufreq_data *data = per_cpu(drv_data, policy->cpu); + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); struct acpi_processor_performance *perf; struct cpufreq_freqs freqs; struct drv_cmd cmd; @@ -416,7 +416,7 @@ out: static int acpi_cpufreq_verify(struct cpufreq_policy *policy) { - struct acpi_cpufreq_data *data = per_cpu(drv_data, policy->cpu); + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); dprintk("acpi_cpufreq_verify\n"); @@ -574,7 +574,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) return -ENOMEM; data->acpi_data = per_cpu_ptr(acpi_perf_data, cpu); - per_cpu(drv_data, cpu) = data; + per_cpu(acfreq_data, cpu) = data; if (cpu_has(c, X86_FEATURE_CONSTANT_TSC)) acpi_cpufreq_driver.flags |= CPUFREQ_CONST_LOOPS; @@ -725,20 +725,20 @@ err_unreg: acpi_processor_unregister_performance(perf, cpu); err_free: kfree(data); - per_cpu(drv_data, cpu) = NULL; + per_cpu(acfreq_data, cpu) = NULL; return result; } static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) { - struct acpi_cpufreq_data *data = per_cpu(drv_data, policy->cpu); + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); dprintk("acpi_cpufreq_cpu_exit\n"); if (data) { cpufreq_frequency_table_put_attr(policy->cpu); - per_cpu(drv_data, policy->cpu) = NULL; + per_cpu(acfreq_data, policy->cpu) = NULL; acpi_processor_unregister_performance(data->acpi_data, policy->cpu); kfree(data); @@ -749,7 +749,7 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy) static int acpi_cpufreq_resume(struct cpufreq_policy *policy) { - struct acpi_cpufreq_data *data = per_cpu(drv_data, policy->cpu); + struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu); dprintk("acpi_cpufreq_resume\n"); @@ -764,14 +764,15 @@ static struct freq_attr *acpi_cpufreq_attr[] = { }; static struct cpufreq_driver acpi_cpufreq_driver = { - .verify = acpi_cpufreq_verify, - .target = acpi_cpufreq_target, - .init = acpi_cpufreq_cpu_init, - .exit = acpi_cpufreq_cpu_exit, - .resume = acpi_cpufreq_resume, - .name = "acpi-cpufreq", - .owner = THIS_MODULE, - .attr = acpi_cpufreq_attr, + .verify = acpi_cpufreq_verify, + .target = acpi_cpufreq_target, + .bios_limit = acpi_processor_get_bios_limit, + .init = acpi_cpufreq_cpu_init, + .exit = acpi_cpufreq_cpu_exit, + .resume = acpi_cpufreq_resume, + .name = "acpi-cpufreq", + .owner = THIS_MODULE, + .attr = acpi_cpufreq_attr, }; static int __init acpi_cpufreq_init(void) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index f10dea409f40..cb01dac267d3 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -164,7 +164,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) } /* cpuinfo and default policy values */ - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; + policy->cpuinfo.transition_latency = 200000; policy->cur = busfreq * max_multiplier; result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c index d47c775eb0ab..9a97116f89e5 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.c @@ -714,14 +714,17 @@ static struct freq_attr *powernow_table_attr[] = { }; static struct cpufreq_driver powernow_driver = { - .verify = powernow_verify, - .target = powernow_target, - .get = powernow_get, - .init = powernow_cpu_init, - .exit = powernow_cpu_exit, - .name = "powernow-k7", - .owner = THIS_MODULE, - .attr = powernow_table_attr, + .verify = powernow_verify, + .target = powernow_target, + .get = powernow_get, +#ifdef CONFIG_X86_POWERNOW_K7_ACPI + .bios_limit = acpi_processor_get_bios_limit, +#endif + .init = powernow_cpu_init, + .exit = powernow_cpu_exit, + .name = "powernow-k7", + .owner = THIS_MODULE, + .attr = powernow_table_attr, }; static int __init powernow_init(void) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 3f12dabeab52..a9df9441a9a2 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1118,7 +1118,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation) { - cpumask_t oldmask; + cpumask_var_t oldmask; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); u32 checkfid; u32 checkvid; @@ -1131,9 +1131,13 @@ static int powernowk8_target(struct cpufreq_policy *pol, checkfid = data->currfid; checkvid = data->currvid; - /* only run on specific CPU from here on */ - oldmask = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu)); + /* only run on specific CPU from here on. */ + /* This is poor form: use a workqueue or smp_call_function_single */ + if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) + return -ENOMEM; + + cpumask_copy(oldmask, tsk_cpumask(current)); + set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); if (smp_processor_id() != pol->cpu) { printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); @@ -1193,7 +1197,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, ret = 0; err_out: - set_cpus_allowed_ptr(current, &oldmask); + set_cpus_allowed_ptr(current, oldmask); + free_cpumask_var(oldmask); return ret; } @@ -1393,14 +1398,15 @@ static struct freq_attr *powernow_k8_attr[] = { }; static struct cpufreq_driver cpufreq_amd64_driver = { - .verify = powernowk8_verify, - .target = powernowk8_target, - .init = powernowk8_cpu_init, - .exit = __devexit_p(powernowk8_cpu_exit), - .get = powernowk8_get, - .name = "powernow-k8", - .owner = THIS_MODULE, - .attr = powernow_k8_attr, + .verify = powernowk8_verify, + .target = powernowk8_target, + .bios_limit = acpi_processor_get_bios_limit, + .init = powernowk8_cpu_init, + .exit = __devexit_p(powernowk8_cpu_exit), + .get = powernowk8_get, + .name = "powernow-k8", + .owner = THIS_MODULE, + .attr = powernow_k8_attr, }; /* driver entry point for init */ diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index 3ae5a7a3a500..2ce8e0b5cc54 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -39,7 +39,7 @@ static struct pci_dev *speedstep_chipset_dev; /* speedstep_processor */ -static unsigned int speedstep_processor; +static enum speedstep_processor speedstep_processor; static u32 pmbase; diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c index f4c290b8482f..ad0083abfa23 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.c @@ -34,7 +34,7 @@ static int relaxed_check; * GET PROCESSOR CORE SPEED IN KHZ * *********************************************************************/ -static unsigned int pentium3_get_frequency(unsigned int processor) +static unsigned int pentium3_get_frequency(enum speedstep_processor processor) { /* See table 14 of p3_ds.pdf and table 22 of 29834003.pdf */ struct { @@ -227,7 +227,7 @@ static unsigned int pentium4_get_frequency(void) /* Warning: may get called from smp_call_function_single. */ -unsigned int speedstep_get_frequency(unsigned int processor) +unsigned int speedstep_get_frequency(enum speedstep_processor processor) { switch (processor) { case SPEEDSTEP_CPU_PCORE: @@ -380,7 +380,7 @@ EXPORT_SYMBOL_GPL(speedstep_detect_processor); * DETECT SPEEDSTEP SPEEDS * *********************************************************************/ -unsigned int speedstep_get_freqs(unsigned int processor, +unsigned int speedstep_get_freqs(enum speedstep_processor processor, unsigned int *low_speed, unsigned int *high_speed, unsigned int *transition_latency, diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h index 2b6c04e5a304..70d9cea1219d 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-lib.h @@ -11,18 +11,18 @@ /* processors */ - -#define SPEEDSTEP_CPU_PIII_C_EARLY 0x00000001 /* Coppermine core */ -#define SPEEDSTEP_CPU_PIII_C 0x00000002 /* Coppermine core */ -#define SPEEDSTEP_CPU_PIII_T 0x00000003 /* Tualatin core */ -#define SPEEDSTEP_CPU_P4M 0x00000004 /* P4-M */ - +enum speedstep_processor { + SPEEDSTEP_CPU_PIII_C_EARLY = 0x00000001, /* Coppermine core */ + SPEEDSTEP_CPU_PIII_C = 0x00000002, /* Coppermine core */ + SPEEDSTEP_CPU_PIII_T = 0x00000003, /* Tualatin core */ + SPEEDSTEP_CPU_P4M = 0x00000004, /* P4-M */ /* the following processors are not speedstep-capable and are not auto-detected * in speedstep_detect_processor(). However, their speed can be detected using * the speedstep_get_frequency() call. */ -#define SPEEDSTEP_CPU_PM 0xFFFFFF03 /* Pentium M */ -#define SPEEDSTEP_CPU_P4D 0xFFFFFF04 /* desktop P4 */ -#define SPEEDSTEP_CPU_PCORE 0xFFFFFF05 /* Core */ + SPEEDSTEP_CPU_PM = 0xFFFFFF03, /* Pentium M */ + SPEEDSTEP_CPU_P4D = 0xFFFFFF04, /* desktop P4 */ + SPEEDSTEP_CPU_PCORE = 0xFFFFFF05, /* Core */ +}; /* speedstep states -- only two of them */ @@ -31,10 +31,10 @@ /* detect a speedstep-capable processor */ -extern unsigned int speedstep_detect_processor (void); +extern enum speedstep_processor speedstep_detect_processor(void); /* detect the current speed (in khz) of the processor */ -extern unsigned int speedstep_get_frequency(unsigned int processor); +extern unsigned int speedstep_get_frequency(enum speedstep_processor processor); /* detect the low and high speeds of the processor. The callback @@ -42,7 +42,7 @@ extern unsigned int speedstep_get_frequency(unsigned int processor); * SPEEDSTEP_LOW; the second argument is zero so that no * cpufreq_notify_transition calls are initiated. */ -extern unsigned int speedstep_get_freqs(unsigned int processor, +extern unsigned int speedstep_get_freqs(enum speedstep_processor processor, unsigned int *low_speed, unsigned int *high_speed, unsigned int *transition_latency, diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c index befea088e4f5..04d73c114e49 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c @@ -35,7 +35,7 @@ static int smi_cmd; static unsigned int smi_sig; /* info about the processor */ -static unsigned int speedstep_processor; +static enum speedstep_processor speedstep_processor; /* * There are only two frequency states for each processor. Values diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index c900b73f9224..9c31e8b09d2c 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -270,8 +270,6 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) node = cpu_to_node(cpu); } numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/0x%x -> Node %d\n", cpu, apicid, node); #endif } diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 6c40f6b5b340..fc6c8ef92dcc 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -499,26 +499,27 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) #ifdef CONFIG_SYSFS /* pointer to _cpuid4_info array (for each cache leaf) */ -static DEFINE_PER_CPU(struct _cpuid4_info *, cpuid4_info); -#define CPUID4_INFO_IDX(x, y) (&((per_cpu(cpuid4_info, x))[y])) +static DEFINE_PER_CPU(struct _cpuid4_info *, ici_cpuid4_info); +#define CPUID4_INFO_IDX(x, y) (&((per_cpu(ici_cpuid4_info, x))[y])) #ifdef CONFIG_SMP static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) { struct _cpuid4_info *this_leaf, *sibling_leaf; unsigned long num_threads_sharing; - int index_msb, i; + int index_msb, i, sibling; struct cpuinfo_x86 *c = &cpu_data(cpu); if ((index == 3) && (c->x86_vendor == X86_VENDOR_AMD)) { - struct cpuinfo_x86 *d; - for_each_online_cpu(i) { - if (!per_cpu(cpuid4_info, i)) + for_each_cpu(i, c->llc_shared_map) { + if (!per_cpu(ici_cpuid4_info, i)) continue; - d = &cpu_data(i); this_leaf = CPUID4_INFO_IDX(i, index); - cpumask_copy(to_cpumask(this_leaf->shared_cpu_map), - d->llc_shared_map); + for_each_cpu(sibling, c->llc_shared_map) { + if (!cpu_online(sibling)) + continue; + set_bit(sibling, this_leaf->shared_cpu_map); + } } return; } @@ -535,7 +536,7 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) c->apicid >> index_msb) { cpumask_set_cpu(i, to_cpumask(this_leaf->shared_cpu_map)); - if (i != cpu && per_cpu(cpuid4_info, i)) { + if (i != cpu && per_cpu(ici_cpuid4_info, i)) { sibling_leaf = CPUID4_INFO_IDX(i, index); cpumask_set_cpu(cpu, to_cpumask( @@ -574,8 +575,8 @@ static void __cpuinit free_cache_attributes(unsigned int cpu) for (i = 0; i < num_cache_leaves; i++) cache_remove_shared_cpu_map(cpu, i); - kfree(per_cpu(cpuid4_info, cpu)); - per_cpu(cpuid4_info, cpu) = NULL; + kfree(per_cpu(ici_cpuid4_info, cpu)); + per_cpu(ici_cpuid4_info, cpu) = NULL; } static int @@ -614,15 +615,15 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu) if (num_cache_leaves == 0) return -ENOENT; - per_cpu(cpuid4_info, cpu) = kzalloc( + per_cpu(ici_cpuid4_info, cpu) = kzalloc( sizeof(struct _cpuid4_info) * num_cache_leaves, GFP_KERNEL); - if (per_cpu(cpuid4_info, cpu) == NULL) + if (per_cpu(ici_cpuid4_info, cpu) == NULL) return -ENOMEM; smp_call_function_single(cpu, get_cpu_leaves, &retval, true); if (retval) { - kfree(per_cpu(cpuid4_info, cpu)); - per_cpu(cpuid4_info, cpu) = NULL; + kfree(per_cpu(ici_cpuid4_info, cpu)); + per_cpu(ici_cpuid4_info, cpu) = NULL; } return retval; @@ -634,7 +635,7 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu) extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */ /* pointer to kobject for cpuX/cache */ -static DEFINE_PER_CPU(struct kobject *, cache_kobject); +static DEFINE_PER_CPU(struct kobject *, ici_cache_kobject); struct _index_kobject { struct kobject kobj; @@ -643,8 +644,8 @@ struct _index_kobject { }; /* pointer to array of kobjects for cpuX/cache/indexY */ -static DEFINE_PER_CPU(struct _index_kobject *, index_kobject); -#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(index_kobject, x))[y])) +static DEFINE_PER_CPU(struct _index_kobject *, ici_index_kobject); +#define INDEX_KOBJECT_PTR(x, y) (&((per_cpu(ici_index_kobject, x))[y])) #define show_one_plus(file_name, object, val) \ static ssize_t show_##file_name \ @@ -863,10 +864,10 @@ static struct kobj_type ktype_percpu_entry = { static void __cpuinit cpuid4_cache_sysfs_exit(unsigned int cpu) { - kfree(per_cpu(cache_kobject, cpu)); - kfree(per_cpu(index_kobject, cpu)); - per_cpu(cache_kobject, cpu) = NULL; - per_cpu(index_kobject, cpu) = NULL; + kfree(per_cpu(ici_cache_kobject, cpu)); + kfree(per_cpu(ici_index_kobject, cpu)); + per_cpu(ici_cache_kobject, cpu) = NULL; + per_cpu(ici_index_kobject, cpu) = NULL; free_cache_attributes(cpu); } @@ -882,14 +883,14 @@ static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu) return err; /* Allocate all required memory */ - per_cpu(cache_kobject, cpu) = + per_cpu(ici_cache_kobject, cpu) = kzalloc(sizeof(struct kobject), GFP_KERNEL); - if (unlikely(per_cpu(cache_kobject, cpu) == NULL)) + if (unlikely(per_cpu(ici_cache_kobject, cpu) == NULL)) goto err_out; - per_cpu(index_kobject, cpu) = kzalloc( + per_cpu(ici_index_kobject, cpu) = kzalloc( sizeof(struct _index_kobject) * num_cache_leaves, GFP_KERNEL); - if (unlikely(per_cpu(index_kobject, cpu) == NULL)) + if (unlikely(per_cpu(ici_index_kobject, cpu) == NULL)) goto err_out; return 0; @@ -913,7 +914,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) if (unlikely(retval < 0)) return retval; - retval = kobject_init_and_add(per_cpu(cache_kobject, cpu), + retval = kobject_init_and_add(per_cpu(ici_cache_kobject, cpu), &ktype_percpu_entry, &sys_dev->kobj, "%s", "cache"); if (retval < 0) { @@ -927,12 +928,12 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) this_object->index = i; retval = kobject_init_and_add(&(this_object->kobj), &ktype_cache, - per_cpu(cache_kobject, cpu), + per_cpu(ici_cache_kobject, cpu), "index%1lu", i); if (unlikely(retval)) { for (j = 0; j < i; j++) kobject_put(&(INDEX_KOBJECT_PTR(cpu, j)->kobj)); - kobject_put(per_cpu(cache_kobject, cpu)); + kobject_put(per_cpu(ici_cache_kobject, cpu)); cpuid4_cache_sysfs_exit(cpu); return retval; } @@ -940,7 +941,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) } cpumask_set_cpu(cpu, to_cpumask(cache_dev_map)); - kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD); + kobject_uevent(per_cpu(ici_cache_kobject, cpu), KOBJ_ADD); return 0; } @@ -949,7 +950,7 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev) unsigned int cpu = sys_dev->id; unsigned long i; - if (per_cpu(cpuid4_info, cpu) == NULL) + if (per_cpu(ici_cpuid4_info, cpu) == NULL) return; if (!cpumask_test_cpu(cpu, to_cpumask(cache_dev_map))) return; @@ -957,7 +958,7 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev) for (i = 0; i < num_cache_leaves; i++) kobject_put(&(INDEX_KOBJECT_PTR(cpu, i)->kobj)); - kobject_put(per_cpu(cache_kobject, cpu)); + kobject_put(per_cpu(ici_cache_kobject, cpu)); cpuid4_cache_sysfs_exit(cpu); } diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index d7ebf25d10ed..a8aacd4b513c 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1388,13 +1388,14 @@ static void __mcheck_cpu_init_timer(void) struct timer_list *t = &__get_cpu_var(mce_timer); int *n = &__get_cpu_var(mce_next_interval); + setup_timer(t, mce_start_timer, smp_processor_id()); + if (mce_ignore_ce) return; *n = check_interval * HZ; if (!*n) return; - setup_timer(t, mce_start_timer, smp_processor_id()); t->expires = round_jiffies(jiffies + *n); add_timer_on(t, smp_processor_id()); } @@ -1928,7 +1929,7 @@ error2: sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[j].attr); error: while (--i >= 0) - sysdev_remove_file(&per_cpu(mce_dev, cpu), &mce_banks[i].attr); + sysdev_remove_file(&per_cpu(mce_dev, cpu), mce_attrs[i]); sysdev_unregister(&per_cpu(mce_dev, cpu)); diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 4fef985fc221..81c499eceb21 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -256,6 +256,16 @@ asmlinkage void smp_thermal_interrupt(struct pt_regs *regs) ack_APIC_irq(); } +/* Thermal monitoring depends on APIC, ACPI and clock modulation */ +static int intel_thermal_supported(struct cpuinfo_x86 *c) +{ + if (!cpu_has_apic) + return 0; + if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC)) + return 0; + return 1; +} + void __init mcheck_intel_therm_init(void) { /* @@ -263,8 +273,7 @@ void __init mcheck_intel_therm_init(void) * LVT value on BSP and use that value to restore APs' thermal LVT * entry BIOS programmed later */ - if (cpu_has(&boot_cpu_data, X86_FEATURE_ACPI) && - cpu_has(&boot_cpu_data, X86_FEATURE_ACC)) + if (intel_thermal_supported(&boot_cpu_data)) lvtthmr_init = apic_read(APIC_LVTTHMR); } @@ -274,8 +283,7 @@ void intel_init_thermal(struct cpuinfo_x86 *c) int tm2 = 0; u32 l, h; - /* Thermal monitoring depends on ACPI and clock modulation*/ - if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC)) + if (!intel_thermal_supported(c)) return; /* @@ -339,8 +347,8 @@ void intel_init_thermal(struct cpuinfo_x86 *c) l = apic_read(APIC_LVTTHMR); apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); - printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", - cpu, tm2 ? "TM2" : "TM1"); + printk_once(KERN_INFO "CPU0: Thermal monitoring enabled (%s)\n", + tm2 ? "TM2" : "TM1"); /* enable thermal throttle processing */ atomic_set(&therm_throt_en, 1); diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index ab1a8a89b984..45506d5dd8df 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1632,6 +1632,7 @@ static void intel_pmu_drain_bts_buffer(struct cpu_hw_events *cpuc) data.period = event->hw.last_period; data.addr = 0; + data.raw = NULL; regs.ip = 0; /* @@ -1749,6 +1750,7 @@ static int p6_pmu_handle_irq(struct pt_regs *regs) u64 val; data.addr = 0; + data.raw = NULL; cpuc = &__get_cpu_var(cpu_hw_events); @@ -1794,6 +1796,7 @@ static int intel_pmu_handle_irq(struct pt_regs *regs) u64 ack, status; data.addr = 0; + data.raw = NULL; cpuc = &__get_cpu_var(cpu_hw_events); @@ -1857,6 +1860,7 @@ static int amd_pmu_handle_irq(struct pt_regs *regs) u64 val; data.addr = 0; + data.raw = NULL; cpuc = &__get_cpu_var(cpu_hw_events); @@ -2062,12 +2066,6 @@ static __init int p6_pmu_init(void) x86_pmu = p6_pmu; - if (!cpu_has_apic) { - pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n"); - pr_info("no hardware sampling interrupt available.\n"); - x86_pmu.apic = 0; - } - return 0; } @@ -2159,6 +2157,16 @@ static __init int amd_pmu_init(void) return 0; } +static void __init pmu_check_apic(void) +{ + if (cpu_has_apic) + return; + + x86_pmu.apic = 0; + pr_info("no APIC, boot with the \"lapic\" boot parameter to force-enable it.\n"); + pr_info("no hardware sampling interrupt available.\n"); +} + void __init init_hw_perf_events(void) { int err; @@ -2180,6 +2188,8 @@ void __init init_hw_perf_events(void) return; } + pmu_check_apic(); + pr_cont("%s PMU driver.\n", x86_pmu.name); if (x86_pmu.num_events > X86_PMC_MAX_GENERIC) { @@ -2287,7 +2297,7 @@ void callchain_store(struct perf_callchain_entry *entry, u64 ip) static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_irq_entry); static DEFINE_PER_CPU(struct perf_callchain_entry, pmc_nmi_entry); -static DEFINE_PER_CPU(int, in_nmi_frame); +static DEFINE_PER_CPU(int, in_ignored_frame); static void @@ -2303,8 +2313,9 @@ static void backtrace_warning(void *data, char *msg) static int backtrace_stack(void *data, char *name) { - per_cpu(in_nmi_frame, smp_processor_id()) = - x86_is_stack_id(NMI_STACK, name); + per_cpu(in_ignored_frame, smp_processor_id()) = + x86_is_stack_id(NMI_STACK, name) || + x86_is_stack_id(DEBUG_STACK, name); return 0; } @@ -2313,7 +2324,7 @@ static void backtrace_address(void *data, unsigned long addr, int reliable) { struct perf_callchain_entry *entry = data; - if (per_cpu(in_nmi_frame, smp_processor_id())) + if (per_cpu(in_ignored_frame, smp_processor_id())) return; if (reliable) diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c index ef42a038f1a6..1c47390dd0e5 100644 --- a/arch/x86/kernel/ds.c +++ b/arch/x86/kernel/ds.c @@ -265,13 +265,13 @@ struct ds_context { int cpu; }; -static DEFINE_PER_CPU(struct ds_context *, cpu_context); +static DEFINE_PER_CPU(struct ds_context *, cpu_ds_context); static struct ds_context *ds_get_context(struct task_struct *task, int cpu) { struct ds_context **p_context = - (task ? &task->thread.ds_ctx : &per_cpu(cpu_context, cpu)); + (task ? &task->thread.ds_ctx : &per_cpu(cpu_ds_context, cpu)); struct ds_context *context = NULL; struct ds_context *new_context = NULL; diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 8e740934bd1f..b13af53883aa 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -103,6 +103,35 @@ static unsigned long *in_exception_stack(unsigned cpu, unsigned long stack, return NULL; } +static inline int +in_irq_stack(unsigned long *stack, unsigned long *irq_stack, + unsigned long *irq_stack_end) +{ + return (stack >= irq_stack && stack < irq_stack_end); +} + +/* + * We are returning from the irq stack and go to the previous one. + * If the previous stack is also in the irq stack, then bp in the first + * frame of the irq stack points to the previous, interrupted one. + * Otherwise we have another level of indirection: We first save + * the bp of the previous stack, then we switch the stack to the irq one + * and save a new bp that links to the previous one. + * (See save_args()) + */ +static inline unsigned long +fixup_bp_irq_link(unsigned long bp, unsigned long *stack, + unsigned long *irq_stack, unsigned long *irq_stack_end) +{ +#ifdef CONFIG_FRAME_POINTER + struct stack_frame *frame = (struct stack_frame *)bp; + + if (!in_irq_stack(stack, irq_stack, irq_stack_end)) + return (unsigned long)frame->next_frame; +#endif + return bp; +} + /* * x86-64 can have up to three kernel stacks: * process stack @@ -175,7 +204,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, irq_stack = irq_stack_end - (IRQ_STACK_SIZE - 64) / sizeof(*irq_stack); - if (stack >= irq_stack && stack < irq_stack_end) { + if (in_irq_stack(stack, irq_stack, irq_stack_end)) { if (ops->stack(data, "IRQ") < 0) break; bp = print_context_stack(tinfo, stack, bp, @@ -186,6 +215,8 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, * pointer (index -1 to end) in the IRQ stack: */ stack = (unsigned long *) (irq_stack_end[-1]); + bp = fixup_bp_irq_link(bp, stack, irq_stack, + irq_stack_end); irq_stack_end = NULL; ops->stack(data, "EOI"); continue; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index d17d482a04f4..f50447d961c0 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -732,7 +732,16 @@ struct early_res { char overlap_ok; }; static struct early_res early_res[MAX_EARLY_RES] __initdata = { - { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */ + { 0, PAGE_SIZE, "BIOS data page", 1 }, /* BIOS data page */ +#ifdef CONFIG_X86_32 + /* + * But first pinch a few for the stack/trampoline stuff + * FIXME: Don't need the extra page at 4K, but need to fix + * trampoline before removing it. (see the GDT stuff) + */ + { PAGE_SIZE, PAGE_SIZE, "EX TRAMPOLINE", 1 }, +#endif + {} }; diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index 63bca794c8f9..673f693fb451 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -1076,10 +1076,10 @@ ENTRY(\sym) TRACE_IRQS_OFF movq %rsp,%rdi /* pt_regs pointer */ xorl %esi,%esi /* no error code */ - PER_CPU(init_tss, %rbp) - subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp) + PER_CPU(init_tss, %r12) + subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12) call \do_sym - addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp) + addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%r12) jmp paranoid_exit /* %ebx: no swapgs flag */ CFI_ENDPROC END(\sym) diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 4f8e2507e8f3..5051b94c9069 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -29,8 +29,6 @@ static void __init i386_default_early_setup(void) void __init i386_start_kernel(void) { - reserve_trampoline_memory(); - reserve_early(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 0b06cd778fd9..b5a9896ca1e7 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -98,8 +98,6 @@ void __init x86_64_start_reservations(char *real_mode_data) { copy_bootdata(__va(real_mode_data)); - reserve_trampoline_memory(); - reserve_early(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/x86/kernel/hw_breakpoint.c b/arch/x86/kernel/hw_breakpoint.c index d42f65ac4927..05d5fec64a94 100644 --- a/arch/x86/kernel/hw_breakpoint.c +++ b/arch/x86/kernel/hw_breakpoint.c @@ -362,8 +362,7 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp, return ret; } - if (bp->callback) - ret = arch_store_info(bp); + ret = arch_store_info(bp); if (ret < 0) return ret; @@ -519,7 +518,7 @@ static int __kprobes hw_breakpoint_handler(struct die_args *args) break; } - (bp->callback)(bp, args->regs); + perf_bp_event(bp, args->regs); rcu_read_unlock(); } diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 20a5b3689463..dd74fe7273b1 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -86,9 +86,15 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs[GDB_DS] = regs->ds; gdb_regs[GDB_ES] = regs->es; gdb_regs[GDB_CS] = regs->cs; - gdb_regs[GDB_SS] = __KERNEL_DS; gdb_regs[GDB_FS] = 0xFFFF; gdb_regs[GDB_GS] = 0xFFFF; + if (user_mode_vm(regs)) { + gdb_regs[GDB_SS] = regs->ss; + gdb_regs[GDB_SP] = regs->sp; + } else { + gdb_regs[GDB_SS] = __KERNEL_DS; + gdb_regs[GDB_SP] = kernel_stack_pointer(regs); + } #else gdb_regs[GDB_R8] = regs->r8; gdb_regs[GDB_R9] = regs->r9; @@ -101,8 +107,8 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) gdb_regs32[GDB_PS] = regs->flags; gdb_regs32[GDB_CS] = regs->cs; gdb_regs32[GDB_SS] = regs->ss; -#endif gdb_regs[GDB_SP] = kernel_stack_pointer(regs); +#endif } /** @@ -220,8 +226,7 @@ static void kgdb_correct_hw_break(void) dr7 |= ((breakinfo[breakno].len << 2) | breakinfo[breakno].type) << ((breakno << 2) + 16); - if (breakno >= 0 && breakno <= 3) - set_debugreg(breakinfo[breakno].addr, breakno); + set_debugreg(breakinfo[breakno].addr, breakno); } else { if ((dr7 & breakbit) && !breakinfo[breakno].enabled) { @@ -395,7 +400,6 @@ int kgdb_arch_handle_exception(int e_vector, int signo, int err_code, /* set the trace bit if we're stepping */ if (remcomInBuffer[0] == 's') { linux_regs->flags |= X86_EFLAGS_TF; - kgdb_single_step = 1; atomic_set(&kgdb_cpu_doing_single_step, raw_smp_processor_id()); } diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 63123d902103..37542b67c57e 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -13,6 +13,9 @@ * Licensed under the terms of the GNU General Public * License version 2. See file COPYING for details. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/firmware.h> #include <linux/pci_ids.h> #include <linux/uaccess.h> @@ -81,7 +84,7 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) memset(csig, 0, sizeof(*csig)); rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy); - pr_info("microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev); + pr_info("CPU%d: patch_level=0x%x\n", cpu, csig->rev); return 0; } @@ -111,8 +114,8 @@ static int get_matching_microcode(int cpu, void *mc, int rev) /* ucode might be chipset specific -- currently we don't support this */ if (mc_header->nb_dev_id || mc_header->sb_dev_id) { - pr_err(KERN_ERR "microcode: CPU%d: loading of chipset " - "specific code not yet supported\n", cpu); + pr_err("CPU%d: loading of chipset specific code not yet supported\n", + cpu); return 0; } @@ -141,12 +144,12 @@ static int apply_microcode_amd(int cpu) /* check current patch id and patch's id for match */ if (rev != mc_amd->hdr.patch_id) { - pr_err("microcode: CPU%d: update failed " - "(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id); + pr_err("CPU%d: update failed (for patch_level=0x%x)\n", + cpu, mc_amd->hdr.patch_id); return -1; } - pr_info("microcode: CPU%d: updated (new patch_level=0x%x)\n", cpu, rev); + pr_info("CPU%d: updated (new patch_level=0x%x)\n", cpu, rev); uci->cpu_sig.rev = rev; return 0; @@ -169,15 +172,14 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size) return NULL; if (section_hdr[0] != UCODE_UCODE_TYPE) { - pr_err("microcode: error: invalid type field in " - "container file section header\n"); + pr_err("error: invalid type field in container file section header\n"); return NULL; } total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8)); if (total_size > size || total_size > UCODE_MAX_SIZE) { - pr_err("microcode: error: size mismatch\n"); + pr_err("error: size mismatch\n"); return NULL; } @@ -206,14 +208,13 @@ static int install_equiv_cpu_table(const u8 *buf) size = buf_pos[2]; if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) { - pr_err("microcode: error: invalid type field in " - "container file section header\n"); + pr_err("error: invalid type field in container file section header\n"); return 0; } equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size); if (!equiv_cpu_table) { - pr_err("microcode: failed to allocate equivalent CPU table\n"); + pr_err("failed to allocate equivalent CPU table\n"); return 0; } @@ -246,7 +247,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) offset = install_equiv_cpu_table(ucode_ptr); if (!offset) { - pr_err("microcode: failed to create equivalent cpu table\n"); + pr_err("failed to create equivalent cpu table\n"); return UCODE_ERROR; } @@ -277,8 +278,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size) if (!leftover) { vfree(uci->mc); uci->mc = new_mc; - pr_debug("microcode: CPU%d found a matching microcode " - "update with version 0x%x (current=0x%x)\n", + pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", cpu, new_rev, uci->cpu_sig.rev); } else { vfree(new_mc); @@ -300,7 +300,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) return UCODE_NFOUND; if (*(u32 *)firmware->data != UCODE_MAGIC) { - pr_err("microcode: invalid UCODE_MAGIC (0x%08x)\n", + pr_err("invalid UCODE_MAGIC (0x%08x)\n", *(u32 *)firmware->data); return UCODE_ERROR; } @@ -313,8 +313,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) static enum ucode_state request_microcode_user(int cpu, const void __user *buf, size_t size) { - pr_info("microcode: AMD microcode update via " - "/dev/cpu/microcode not supported\n"); + pr_info("AMD microcode update via /dev/cpu/microcode not supported\n"); return UCODE_ERROR; } @@ -334,14 +333,13 @@ void init_microcode_amd(struct device *device) WARN_ON(c->x86_vendor != X86_VENDOR_AMD); if (c->x86 < 0x10) { - pr_warning("microcode: AMD CPU family 0x%x not supported\n", - c->x86); + pr_warning("AMD CPU family 0x%x not supported\n", c->x86); return; } supported_cpu = 1; if (request_firmware(&firmware, fw_name, device)) - pr_err("microcode: failed to load file %s\n", fw_name); + pr_err("failed to load file %s\n", fw_name); } void fini_microcode_amd(void) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index e68aae397869..844c02c65fcb 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -70,6 +70,9 @@ * Fix sigmatch() macro to handle old CPUs with pf == 0. * Thanks to Stuart Swales for pointing out this bug. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/platform_device.h> #include <linux/miscdevice.h> #include <linux/capability.h> @@ -209,7 +212,7 @@ static ssize_t microcode_write(struct file *file, const char __user *buf, ssize_t ret = -EINVAL; if ((len >> PAGE_SHIFT) > totalram_pages) { - pr_err("microcode: too much data (max %ld pages)\n", totalram_pages); + pr_err("too much data (max %ld pages)\n", totalram_pages); return ret; } @@ -244,7 +247,7 @@ static int __init microcode_dev_init(void) error = misc_register(µcode_dev); if (error) { - pr_err("microcode: can't misc_register on minor=%d\n", MICROCODE_MINOR); + pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR); return error; } @@ -359,7 +362,7 @@ static enum ucode_state microcode_resume_cpu(int cpu) if (!uci->mc) return UCODE_NFOUND; - pr_debug("microcode: CPU%d updated upon resume\n", cpu); + pr_debug("CPU%d updated upon resume\n", cpu); apply_microcode_on_target(cpu); return UCODE_OK; @@ -379,7 +382,7 @@ static enum ucode_state microcode_init_cpu(int cpu) ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev); if (ustate == UCODE_OK) { - pr_debug("microcode: CPU%d updated upon init\n", cpu); + pr_debug("CPU%d updated upon init\n", cpu); apply_microcode_on_target(cpu); } @@ -406,7 +409,7 @@ static int mc_sysdev_add(struct sys_device *sys_dev) if (!cpu_online(cpu)) return 0; - pr_debug("microcode: CPU%d added\n", cpu); + pr_debug("CPU%d added\n", cpu); err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); if (err) @@ -425,7 +428,7 @@ static int mc_sysdev_remove(struct sys_device *sys_dev) if (!cpu_online(cpu)) return 0; - pr_debug("microcode: CPU%d removed\n", cpu); + pr_debug("CPU%d removed\n", cpu); microcode_fini_cpu(cpu); sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); return 0; @@ -473,15 +476,15 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu) microcode_update_cpu(cpu); case CPU_DOWN_FAILED: case CPU_DOWN_FAILED_FROZEN: - pr_debug("microcode: CPU%d added\n", cpu); + pr_debug("CPU%d added\n", cpu); if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group)) - pr_err("microcode: Failed to create group for CPU%d\n", cpu); + pr_err("Failed to create group for CPU%d\n", cpu); break; case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: /* Suspend is in progress, only remove the interface */ sysfs_remove_group(&sys_dev->kobj, &mc_attr_group); - pr_debug("microcode: CPU%d removed\n", cpu); + pr_debug("CPU%d removed\n", cpu); break; case CPU_DEAD: case CPU_UP_CANCELED_FROZEN: @@ -507,7 +510,7 @@ static int __init microcode_init(void) microcode_ops = init_amd_microcode(); if (!microcode_ops) { - pr_err("microcode: no support for this CPU vendor\n"); + pr_err("no support for this CPU vendor\n"); return -ENODEV; } @@ -541,8 +544,7 @@ static int __init microcode_init(void) register_hotcpu_notifier(&mc_cpu_notifier); pr_info("Microcode Update Driver: v" MICROCODE_VERSION - " <tigran@aivazian.fsnet.co.uk>," - " Peter Oruba\n"); + " <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n"); return 0; } diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index 0d334ddd0a96..ebd193e476ca 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -70,6 +70,9 @@ * Fix sigmatch() macro to handle old CPUs with pf == 0. * Thanks to Stuart Swales for pointing out this bug. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/firmware.h> #include <linux/uaccess.h> #include <linux/kernel.h> @@ -146,8 +149,7 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 || cpu_has(c, X86_FEATURE_IA64)) { - printk(KERN_ERR "microcode: CPU%d not a capable Intel " - "processor\n", cpu_num); + pr_err("CPU%d not a capable Intel processor\n", cpu_num); return -1; } @@ -165,8 +167,8 @@ static int collect_cpu_info(int cpu_num, struct cpu_signature *csig) /* get the current revision from MSR 0x8B */ rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev); - printk(KERN_INFO "microcode: CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n", - cpu_num, csig->sig, csig->pf, csig->rev); + pr_info("CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n", + cpu_num, csig->sig, csig->pf, csig->rev); return 0; } @@ -194,28 +196,24 @@ static int microcode_sanity_check(void *mc) data_size = get_datasize(mc_header); if (data_size + MC_HEADER_SIZE > total_size) { - printk(KERN_ERR "microcode: error! " - "Bad data size in microcode data file\n"); + pr_err("error! Bad data size in microcode data file\n"); return -EINVAL; } if (mc_header->ldrver != 1 || mc_header->hdrver != 1) { - printk(KERN_ERR "microcode: error! " - "Unknown microcode update format\n"); + pr_err("error! Unknown microcode update format\n"); return -EINVAL; } ext_table_size = total_size - (MC_HEADER_SIZE + data_size); if (ext_table_size) { if ((ext_table_size < EXT_HEADER_SIZE) || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) { - printk(KERN_ERR "microcode: error! " - "Small exttable size in microcode data file\n"); + pr_err("error! Small exttable size in microcode data file\n"); return -EINVAL; } ext_header = mc + MC_HEADER_SIZE + data_size; if (ext_table_size != exttable_size(ext_header)) { - printk(KERN_ERR "microcode: error! " - "Bad exttable size in microcode data file\n"); + pr_err("error! Bad exttable size in microcode data file\n"); return -EFAULT; } ext_sigcount = ext_header->count; @@ -230,8 +228,7 @@ static int microcode_sanity_check(void *mc) while (i--) ext_table_sum += ext_tablep[i]; if (ext_table_sum) { - printk(KERN_WARNING "microcode: aborting, " - "bad extended signature table checksum\n"); + pr_warning("aborting, bad extended signature table checksum\n"); return -EINVAL; } } @@ -242,7 +239,7 @@ static int microcode_sanity_check(void *mc) while (i--) orig_sum += ((int *)mc)[i]; if (orig_sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); + pr_err("aborting, bad checksum\n"); return -EINVAL; } if (!ext_table_size) @@ -255,7 +252,7 @@ static int microcode_sanity_check(void *mc) - (mc_header->sig + mc_header->pf + mc_header->cksum) + (ext_sig->sig + ext_sig->pf + ext_sig->cksum); if (sum) { - printk(KERN_ERR "microcode: aborting, bad checksum\n"); + pr_err("aborting, bad checksum\n"); return -EINVAL; } } @@ -327,13 +324,11 @@ static int apply_microcode(int cpu) rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]); if (val[1] != mc_intel->hdr.rev) { - printk(KERN_ERR "microcode: CPU%d update " - "to revision 0x%x failed\n", - cpu_num, mc_intel->hdr.rev); + pr_err("CPU%d update to revision 0x%x failed\n", + cpu_num, mc_intel->hdr.rev); return -1; } - printk(KERN_INFO "microcode: CPU%d updated to revision " - "0x%x, date = %04x-%02x-%02x \n", + pr_info("CPU%d updated to revision 0x%x, date = %04x-%02x-%02x \n", cpu_num, val[1], mc_intel->hdr.date & 0xffff, mc_intel->hdr.date >> 24, @@ -362,8 +357,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, mc_size = get_totalsize(&mc_header); if (!mc_size || mc_size > leftover) { - printk(KERN_ERR "microcode: error!" - "Bad data in microcode data file\n"); + pr_err("error! Bad data in microcode data file\n"); break; } @@ -405,9 +399,8 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, vfree(uci->mc); uci->mc = (struct microcode_intel *)new_mc; - pr_debug("microcode: CPU%d found a matching microcode update with" - " version 0x%x (current=0x%x)\n", - cpu, new_rev, uci->cpu_sig.rev); + pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", + cpu, new_rev, uci->cpu_sig.rev); out: return state; } @@ -429,7 +422,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) c->x86, c->x86_model, c->x86_mask); if (request_firmware(&firmware, name, device)) { - pr_debug("microcode: data file %s load failed\n", name); + pr_debug("data file %s load failed\n", name); return UCODE_NFOUND; } diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index 35a57c963df9..40b54ceb68b5 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -945,9 +945,6 @@ void __init early_reserve_e820_mpc_new(void) { if (enable_update_mptable && alloc_mptable) { u64 startt = 0; -#ifdef CONFIG_X86_TRAMPOLINE - startt = TRAMPOLINE_BASE; -#endif mpc_new_phys = early_reserve_e820(startt, mpc_new_length, 4); } } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index afcc58b69c7c..fcc2f2bfa39c 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -120,11 +120,14 @@ static void __init dma32_free_bootmem(void) void __init pci_iommu_alloc(void) { + int use_swiotlb; + + use_swiotlb = pci_swiotlb_init(); #ifdef CONFIG_X86_64 /* free the range so iommu could get some range less than 4G */ dma32_free_bootmem(); #endif - if (pci_swiotlb_init()) + if (use_swiotlb) return; gart_iommu_hole_init(); diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index e6a0d402f171..56c0e730d3fe 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -710,7 +710,8 @@ static void gart_iommu_shutdown(void) struct pci_dev *dev; int i; - if (no_agp) + /* don't shutdown it if there is AGP installed */ + if (!no_agp) return; for (i = 0; i < num_k8_northbridges; i++) { diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 5e2ba634ea15..7a7bd4e3ec49 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -10,6 +10,8 @@ #include <linux/clockchips.h> #include <linux/random.h> #include <linux/user-return-notifier.h> +#include <linux/dmi.h> +#include <linux/utsname.h> #include <trace/events/power.h> #include <linux/hw_breakpoint.h> #include <asm/system.h> @@ -90,6 +92,25 @@ void exit_thread(void) } } +void show_regs_common(void) +{ + const char *board, *product; + + board = dmi_get_system_info(DMI_BOARD_NAME); + if (!board) + board = ""; + product = dmi_get_system_info(DMI_PRODUCT_NAME); + if (!product) + product = ""; + + printk("\n"); + printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n", + current->pid, current->comm, print_tainted(), + init_utsname()->release, + (int)strcspn(init_utsname()->version, " "), + init_utsname()->version, board, product); +} + void flush_thread(void) { struct task_struct *tsk = current; diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 075580b35682..120b88797a75 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -23,7 +23,6 @@ #include <linux/vmalloc.h> #include <linux/user.h> #include <linux/interrupt.h> -#include <linux/utsname.h> #include <linux/delay.h> #include <linux/reboot.h> #include <linux/init.h> @@ -35,7 +34,6 @@ #include <linux/tick.h> #include <linux/percpu.h> #include <linux/prctl.h> -#include <linux/dmi.h> #include <linux/ftrace.h> #include <linux/uaccess.h> #include <linux/io.h> @@ -128,7 +126,6 @@ void __show_regs(struct pt_regs *regs, int all) unsigned long d0, d1, d2, d3, d6, d7; unsigned long sp; unsigned short ss, gs; - const char *board; if (user_mode_vm(regs)) { sp = regs->sp; @@ -140,16 +137,7 @@ void __show_regs(struct pt_regs *regs, int all) savesegment(gs, gs); } - printk("\n"); - - board = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!board) - board = ""; - printk("Pid: %d, comm: %s %s (%s %.*s) %s\n", - task_pid_nr(current), current->comm, - print_tainted(), init_utsname()->release, - (int)strcspn(init_utsname()->version, " "), - init_utsname()->version, board); + show_regs_common(); printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n", (u16)regs->cs, regs->ip, regs->flags, diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index c95c8f4e790a..e5ab0cd0ef36 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -26,7 +26,6 @@ #include <linux/slab.h> #include <linux/user.h> #include <linux/interrupt.h> -#include <linux/utsname.h> #include <linux/delay.h> #include <linux/module.h> #include <linux/ptrace.h> @@ -38,7 +37,6 @@ #include <linux/uaccess.h> #include <linux/io.h> #include <linux/ftrace.h> -#include <linux/dmi.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -163,18 +161,8 @@ void __show_regs(struct pt_regs *regs, int all) unsigned long d0, d1, d2, d3, d6, d7; unsigned int fsindex, gsindex; unsigned int ds, cs, es; - const char *board; - - printk("\n"); - print_modules(); - board = dmi_get_system_info(DMI_PRODUCT_NAME); - if (!board) - board = ""; - printk(KERN_INFO "Pid: %d, comm: %.20s %s %s %.*s %s\n", - current->pid, current->comm, print_tainted(), - init_utsname()->release, - (int)strcspn(init_utsname()->version, " "), - init_utsname()->version, board); + + show_regs_common(); printk(KERN_INFO "RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->ip); printk_address(regs->ip, 1); printk(KERN_INFO "RSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 04d182a7cfdb..7079ddaf0731 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -555,7 +555,9 @@ static int genregs_set(struct task_struct *target, return ret; } -static void ptrace_triggered(struct perf_event *bp, void *data) +static void ptrace_triggered(struct perf_event *bp, int nmi, + struct perf_sample_data *data, + struct pt_regs *regs) { int i; struct thread_struct *thread = &(current->thread); @@ -593,13 +595,13 @@ static unsigned long ptrace_get_dr7(struct perf_event *bp[]) return dr7; } -static struct perf_event * +static int ptrace_modify_breakpoint(struct perf_event *bp, int len, int type, struct task_struct *tsk, int disabled) { int err; int gen_len, gen_type; - DEFINE_BREAKPOINT_ATTR(attr); + struct perf_event_attr attr; /* * We shoud have at least an inactive breakpoint at this @@ -607,18 +609,18 @@ ptrace_modify_breakpoint(struct perf_event *bp, int len, int type, * written the address register first */ if (!bp) - return ERR_PTR(-EINVAL); + return -EINVAL; err = arch_bp_generic_fields(len, type, &gen_len, &gen_type); if (err) - return ERR_PTR(err); + return err; attr = bp->attr; attr.bp_len = gen_len; attr.bp_type = gen_type; attr.disabled = disabled; - return modify_user_hw_breakpoint(bp, &attr, bp->callback, tsk); + return modify_user_hw_breakpoint(bp, &attr); } /* @@ -656,28 +658,17 @@ restore: if (!second_pass) continue; - thread->ptrace_bps[i] = NULL; - bp = ptrace_modify_breakpoint(bp, len, type, + rc = ptrace_modify_breakpoint(bp, len, type, tsk, 1); - if (IS_ERR(bp)) { - rc = PTR_ERR(bp); - thread->ptrace_bps[i] = NULL; + if (rc) break; - } - thread->ptrace_bps[i] = bp; } continue; } - bp = ptrace_modify_breakpoint(bp, len, type, tsk, 0); - - /* Incorrect bp, or we have a bug in bp API */ - if (IS_ERR(bp)) { - rc = PTR_ERR(bp); - thread->ptrace_bps[i] = NULL; + rc = ptrace_modify_breakpoint(bp, len, type, tsk, 0); + if (rc) break; - } - thread->ptrace_bps[i] = bp; } /* * Make a second pass to free the remaining unused breakpoints @@ -721,9 +712,10 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, { struct perf_event *bp; struct thread_struct *t = &tsk->thread; - DEFINE_BREAKPOINT_ATTR(attr); + struct perf_event_attr attr; if (!t->ptrace_bps[nr]) { + hw_breakpoint_init(&attr); /* * Put stub len and type to register (reserve) an inactive but * correct bp @@ -734,26 +726,32 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr, attr.disabled = 1; bp = register_user_hw_breakpoint(&attr, ptrace_triggered, tsk); + + /* + * CHECKME: the previous code returned -EIO if the addr wasn't + * a valid task virtual addr. The new one will return -EINVAL in + * this case. + * -EINVAL may be what we want for in-kernel breakpoints users, + * but -EIO looks better for ptrace, since we refuse a register + * writing for the user. And anyway this is the previous + * behaviour. + */ + if (IS_ERR(bp)) + return PTR_ERR(bp); + + t->ptrace_bps[nr] = bp; } else { + int err; + bp = t->ptrace_bps[nr]; - t->ptrace_bps[nr] = NULL; attr = bp->attr; attr.bp_addr = addr; - bp = modify_user_hw_breakpoint(bp, &attr, bp->callback, tsk); + err = modify_user_hw_breakpoint(bp, &attr); + if (err) + return err; } - /* - * CHECKME: the previous code returned -EIO if the addr wasn't a - * valid task virtual addr. The new one will return -EINVAL in this - * case. - * -EINVAL may be what we want for in-kernel breakpoints users, but - * -EIO looks better for ptrace, since we refuse a register writing - * for the user. And anyway this is the previous behaviour. - */ - if (IS_ERR(bp)) - return PTR_ERR(bp); - t->ptrace_bps[nr] = bp; return 0; } diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2b97fc5b124e..1545bc0c9845 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -259,6 +259,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"), }, }, + { /* Handle problems with rebooting on ASUS P4S800 */ + .callback = set_bios_reboot, + .ident = "ASUS P4S800", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "P4S800"), + }, + }, { } }; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 946a311a25c9..f7b8b9894b22 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -73,6 +73,7 @@ #include <asm/mtrr.h> #include <asm/apic.h> +#include <asm/trampoline.h> #include <asm/e820.h> #include <asm/mpspec.h> #include <asm/setup.h> @@ -875,6 +876,13 @@ void __init setup_arch(char **cmdline_p) reserve_brk(); + /* + * Find and reserve possible boot-time SMP configuration: + */ + find_smp_config(); + + reserve_trampoline_memory(); + #ifdef CONFIG_ACPI_SLEEP /* * Reserve low memory region for sleep support. @@ -921,11 +929,6 @@ void __init setup_arch(char **cmdline_p) early_acpi_boot_init(); - /* - * Find and reserve possible boot-time SMP configuration: - */ - find_smp_config(); - #ifdef CONFIG_ACPI_NUMA /* * Parse SRAT to discover nodes. diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index d559af913e1f..35abcb8b00e9 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -1,3 +1,5 @@ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -20,9 +22,9 @@ #include <asm/stackprotector.h> #ifdef CONFIG_DEBUG_PER_CPU_MAPS -# define DBG(x...) printk(KERN_DEBUG x) +# define DBG(fmt, ...) pr_dbg(fmt, ##__VA_ARGS__) #else -# define DBG(x...) +# define DBG(fmt, ...) do { if (0) pr_dbg(fmt, ##__VA_ARGS__); } while (0) #endif DEFINE_PER_CPU(int, cpu_number); @@ -116,8 +118,8 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size, } else { ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node), size, align, goal); - pr_debug("per cpu data for cpu%d %lu bytes on node%d at " - "%016lx\n", cpu, size, node, __pa(ptr)); + pr_debug("per cpu data for cpu%d %lu bytes on node%d at %016lx\n", + cpu, size, node, __pa(ptr)); } return ptr; #else @@ -198,8 +200,7 @@ void __init setup_per_cpu_areas(void) pcpu_cpu_distance, pcpu_fc_alloc, pcpu_fc_free); if (rc < 0) - pr_warning("PERCPU: %s allocator failed (%d), " - "falling back to page size\n", + pr_warning("%s allocator failed (%d), falling back to page size\n", pcpu_fc_names[pcpu_chosen_fc], rc); } if (rc < 0) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 324f2a44c221..678d0b8c26f3 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -671,6 +671,26 @@ static void __cpuinit do_fork_idle(struct work_struct *work) complete(&c_idle->done); } +/* reduce the number of lines printed when booting a large cpu count system */ +static void __cpuinit announce_cpu(int cpu, int apicid) +{ + static int current_node = -1; + int node = cpu_to_node(cpu); + + if (system_state == SYSTEM_BOOTING) { + if (node != current_node) { + if (current_node > (-1)) + pr_cont(" Ok.\n"); + current_node = node; + pr_info("Booting Node %3d, Processors ", node); + } + pr_cont(" #%d%s", cpu, cpu == (nr_cpu_ids - 1) ? " Ok.\n" : ""); + return; + } else + pr_info("Booting Node %d Processor %d APIC 0x%x\n", + node, cpu, apicid); +} + /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad * (ie clustered apic addressing mode), this is a LOGICAL apic ID. @@ -687,7 +707,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) .done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done), }; - INIT_WORK(&c_idle.work, do_fork_idle); + INIT_WORK_ON_STACK(&c_idle.work, do_fork_idle); alternatives_smp_switch(1); @@ -713,6 +733,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) if (IS_ERR(c_idle.idle)) { printk("failed fork for CPU %d\n", cpu); + destroy_work_on_stack(&c_idle.work); return PTR_ERR(c_idle.idle); } @@ -736,9 +757,8 @@ do_rest: /* start_ip had better be page-aligned! */ start_ip = setup_trampoline(); - /* So we see what's up */ - printk(KERN_INFO "Booting processor %d APIC 0x%x ip 0x%lx\n", - cpu, apicid, start_ip); + /* So we see what's up */ + announce_cpu(cpu, apicid); /* * This grunge runs the startup process for @@ -787,21 +807,17 @@ do_rest: udelay(100); } - if (cpumask_test_cpu(cpu, cpu_callin_mask)) { - /* number CPUs logically, starting from 1 (BSP is 0) */ - pr_debug("OK.\n"); - printk(KERN_INFO "CPU%d: ", cpu); - print_cpu_info(&cpu_data(cpu)); - pr_debug("CPU has booted.\n"); - } else { + if (cpumask_test_cpu(cpu, cpu_callin_mask)) + pr_debug("CPU%d: has booted.\n", cpu); + else { boot_error = 1; if (*((volatile unsigned char *)trampoline_base) == 0xA5) /* trampoline started but...? */ - printk(KERN_ERR "Stuck ??\n"); + pr_err("CPU%d: Stuck ??\n", cpu); else /* trampoline code not run */ - printk(KERN_ERR "Not responding.\n"); + pr_err("CPU%d: Not responding.\n", cpu); if (apic->inquire_remote_apic) apic->inquire_remote_apic(apicid); } @@ -831,6 +847,7 @@ do_rest: smpboot_restore_warm_reset_vector(); } + destroy_work_on_stack(&c_idle.work); return boot_error; } @@ -1291,14 +1308,16 @@ void native_cpu_die(unsigned int cpu) for (i = 0; i < 10; i++) { /* They ack this in play_dead by setting CPU_DEAD */ if (per_cpu(cpu_state, cpu) == CPU_DEAD) { - printk(KERN_INFO "CPU %d is now offline\n", cpu); + if (system_state == SYSTEM_RUNNING) + pr_info("CPU %u is now offline\n", cpu); + if (1 == num_online_cpus()) alternatives_smp_switch(0); return; } msleep(100); } - printk(KERN_ERR "CPU %u didn't die...\n", cpu); + pr_err("CPU %u didn't die...\n", cpu); } void play_dead_common(void) diff --git a/arch/x86/kernel/sys_i386_32.c b/arch/x86/kernel/sys_i386_32.c index 1884a8d12bfa..dee1ff7cba58 100644 --- a/arch/x86/kernel/sys_i386_32.c +++ b/arch/x86/kernel/sys_i386_32.c @@ -24,31 +24,6 @@ #include <asm/syscalls.h> -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file *file = NULL; - struct mm_struct *mm = current->mm; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(&mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(&mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - /* * Perform the select(nd, in, out, ex, tv) and mmap() system * calls. Linux/i386 didn't use to be able to handle more than @@ -77,7 +52,7 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg) if (a.offset & ~PAGE_MASK) goto out; - err = sys_mmap2(a.addr, a.len, a.prot, a.flags, + err = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT); out: return err; diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c index 45e00eb09c3a..8aa2057efd12 100644 --- a/arch/x86/kernel/sys_x86_64.c +++ b/arch/x86/kernel/sys_x86_64.c @@ -23,26 +23,11 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, unsigned long, fd, unsigned long, off) { long error; - struct file *file; - error = -EINVAL; if (off & ~PAGE_MASK) goto out; - error = -EBADF; - file = NULL; - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, off >> PAGE_SHIFT); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); + error = sys_mmap_pgoff(addr, len, prot, flags, fd, off >> PAGE_SHIFT); out: return error; } diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index 70c2125d55b9..15228b5d3eb7 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -191,7 +191,7 @@ ENTRY(sys_call_table) .long sys_ni_syscall /* reserved for streams2 */ .long ptregs_vfork /* 190 */ .long sys_getrlimit - .long sys_mmap2 + .long sys_mmap_pgoff .long sys_truncate64 .long sys_ftruncate64 .long sys_stat64 /* 195 */ diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index cd022121cab6..c652ef62742d 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -12,21 +12,19 @@ #endif /* ready for x86_64 and x86 */ -unsigned char *__trampinitdata trampoline_base = __va(TRAMPOLINE_BASE); +unsigned char *__trampinitdata trampoline_base; void __init reserve_trampoline_memory(void) { -#ifdef CONFIG_X86_32 - /* - * But first pinch a few for the stack/trampoline stuff - * FIXME: Don't need the extra page at 4K, but need to fix - * trampoline before removing it. (see the GDT stuff) - */ - reserve_early(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE"); -#endif + unsigned long mem; + /* Has to be in very low memory so we can execute real-mode AP code. */ - reserve_early(TRAMPOLINE_BASE, TRAMPOLINE_BASE + TRAMPOLINE_SIZE, - "TRAMPOLINE"); + mem = find_e820_area(0, 1<<20, TRAMPOLINE_SIZE, PAGE_SIZE); + if (mem == -1L) + panic("Cannot allocate trampoline\n"); + + trampoline_base = __va(mem); + reserve_early(mem, mem + TRAMPOLINE_SIZE, "TRAMPOLINE"); } /* diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index fab7440c9bb2..296aba49472a 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -29,6 +29,8 @@ * Based on QEMU and Xen. */ +#define pr_fmt(fmt) "pit: " fmt + #include <linux/kvm_host.h> #include "irq.h" @@ -262,7 +264,7 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu) static void destroy_pit_timer(struct kvm_timer *pt) { - pr_debug("pit: execute del timer!\n"); + pr_debug("execute del timer!\n"); hrtimer_cancel(&pt->timer); } @@ -284,7 +286,7 @@ static void create_pit_timer(struct kvm_kpit_state *ps, u32 val, int is_period) interval = muldiv64(val, NSEC_PER_SEC, KVM_PIT_FREQ); - pr_debug("pit: create pit timer, interval is %llu nsec\n", interval); + pr_debug("create pit timer, interval is %llu nsec\n", interval); /* TODO The new value only affected after the retriggered */ hrtimer_cancel(&pt->timer); @@ -309,7 +311,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val) WARN_ON(!mutex_is_locked(&ps->lock)); - pr_debug("pit: load_count val is %d, channel is %d\n", val, channel); + pr_debug("load_count val is %d, channel is %d\n", val, channel); /* * The largest possible initial count is 0; this is equivalent @@ -395,8 +397,8 @@ static int pit_ioport_write(struct kvm_io_device *this, mutex_lock(&pit_state->lock); if (val != 0) - pr_debug("pit: write addr is 0x%x, len is %d, val is 0x%x\n", - (unsigned int)addr, len, val); + pr_debug("write addr is 0x%x, len is %d, val is 0x%x\n", + (unsigned int)addr, len, val); if (addr == 3) { channel = val >> 6; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 3de0b37ec038..1d9b33843c80 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -316,7 +316,7 @@ static void svm_hardware_disable(void *garbage) static int svm_hardware_enable(void *garbage) { - struct svm_cpu_data *svm_data; + struct svm_cpu_data *sd; uint64_t efer; struct descriptor_table gdt_descr; struct desc_struct *gdt; @@ -331,63 +331,61 @@ static int svm_hardware_enable(void *garbage) me); return -EINVAL; } - svm_data = per_cpu(svm_data, me); + sd = per_cpu(svm_data, me); - if (!svm_data) { + if (!sd) { printk(KERN_ERR "svm_hardware_enable: svm_data is NULL on %d\n", me); return -EINVAL; } - svm_data->asid_generation = 1; - svm_data->max_asid = cpuid_ebx(SVM_CPUID_FUNC) - 1; - svm_data->next_asid = svm_data->max_asid + 1; + sd->asid_generation = 1; + sd->max_asid = cpuid_ebx(SVM_CPUID_FUNC) - 1; + sd->next_asid = sd->max_asid + 1; kvm_get_gdt(&gdt_descr); gdt = (struct desc_struct *)gdt_descr.base; - svm_data->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS); + sd->tss_desc = (struct kvm_ldttss_desc *)(gdt + GDT_ENTRY_TSS); wrmsrl(MSR_EFER, efer | EFER_SVME); - wrmsrl(MSR_VM_HSAVE_PA, - page_to_pfn(svm_data->save_area) << PAGE_SHIFT); + wrmsrl(MSR_VM_HSAVE_PA, page_to_pfn(sd->save_area) << PAGE_SHIFT); return 0; } static void svm_cpu_uninit(int cpu) { - struct svm_cpu_data *svm_data - = per_cpu(svm_data, raw_smp_processor_id()); + struct svm_cpu_data *sd = per_cpu(svm_data, raw_smp_processor_id()); - if (!svm_data) + if (!sd) return; per_cpu(svm_data, raw_smp_processor_id()) = NULL; - __free_page(svm_data->save_area); - kfree(svm_data); + __free_page(sd->save_area); + kfree(sd); } static int svm_cpu_init(int cpu) { - struct svm_cpu_data *svm_data; + struct svm_cpu_data *sd; int r; - svm_data = kzalloc(sizeof(struct svm_cpu_data), GFP_KERNEL); - if (!svm_data) + sd = kzalloc(sizeof(struct svm_cpu_data), GFP_KERNEL); + if (!sd) return -ENOMEM; - svm_data->cpu = cpu; - svm_data->save_area = alloc_page(GFP_KERNEL); + sd->cpu = cpu; + sd->save_area = alloc_page(GFP_KERNEL); r = -ENOMEM; - if (!svm_data->save_area) + if (!sd->save_area) goto err_1; - per_cpu(svm_data, cpu) = svm_data; + per_cpu(svm_data, cpu) = sd; return 0; err_1: - kfree(svm_data); + kfree(sd); return r; } @@ -1092,16 +1090,16 @@ static void save_host_msrs(struct kvm_vcpu *vcpu) #endif } -static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data) +static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *sd) { - if (svm_data->next_asid > svm_data->max_asid) { - ++svm_data->asid_generation; - svm_data->next_asid = 1; + if (sd->next_asid > sd->max_asid) { + ++sd->asid_generation; + sd->next_asid = 1; svm->vmcb->control.tlb_ctl = TLB_CONTROL_FLUSH_ALL_ASID; } - svm->asid_generation = svm_data->asid_generation; - svm->vmcb->control.asid = svm_data->next_asid++; + svm->asid_generation = sd->asid_generation; + svm->vmcb->control.asid = sd->next_asid++; } static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr) @@ -2429,8 +2427,8 @@ static void reload_tss(struct kvm_vcpu *vcpu) { int cpu = raw_smp_processor_id(); - struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu); - svm_data->tss_desc->type = 9; /* available 32/64-bit TSS */ + struct svm_cpu_data *sd = per_cpu(svm_data, cpu); + sd->tss_desc->type = 9; /* available 32/64-bit TSS */ load_TR_desc(); } @@ -2438,12 +2436,12 @@ static void pre_svm_run(struct vcpu_svm *svm) { int cpu = raw_smp_processor_id(); - struct svm_cpu_data *svm_data = per_cpu(svm_data, cpu); + struct svm_cpu_data *sd = per_cpu(svm_data, cpu); svm->vmcb->control.tlb_ctl = TLB_CONTROL_DO_NOTHING; /* FIXME: handle wraparound of asid_generation */ - if (svm->asid_generation != svm_data->asid_generation) - new_asid(svm, svm_data); + if (svm->asid_generation != sd->asid_generation) + new_asid(svm, sd); } static void svm_inject_nmi(struct kvm_vcpu *vcpu) diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile index a2d6472895fb..45b20e486c2f 100644 --- a/arch/x86/lib/Makefile +++ b/arch/x86/lib/Makefile @@ -5,7 +5,7 @@ inat_tables_script = $(srctree)/arch/x86/tools/gen-insn-attr-x86.awk inat_tables_maps = $(srctree)/arch/x86/lib/x86-opcode-map.txt quiet_cmd_inat_tables = GEN $@ - cmd_inat_tables = $(AWK) -f $(inat_tables_script) $(inat_tables_maps) > $@ + cmd_inat_tables = $(AWK) -f $(inat_tables_script) $(inat_tables_maps) > $@ || rm -f $@ $(obj)/inat-tables.c: $(inat_tables_script) $(inat_tables_maps) $(call cmd,inat_tables) @@ -20,7 +20,7 @@ lib-y := delay.o lib-y += thunk_$(BITS).o lib-y += usercopy_$(BITS).o getuser.o putuser.o lib-y += memcpy_$(BITS).o -lib-y += insn.o inat.o +lib-$(CONFIG_KPROBES) += insn.o inat.o obj-y += msr-reg.o msr-reg-export.o diff --git a/arch/x86/lib/msr.c b/arch/x86/lib/msr.c index 41628b104b9e..872834177937 100644 --- a/arch/x86/lib/msr.c +++ b/arch/x86/lib/msr.c @@ -7,7 +7,6 @@ struct msr_info { u32 msr_no; struct msr reg; struct msr *msrs; - int off; int err; }; @@ -18,7 +17,7 @@ static void __rdmsr_on_cpu(void *info) int this_cpu = raw_smp_processor_id(); if (rv->msrs) - reg = &rv->msrs[this_cpu - rv->off]; + reg = per_cpu_ptr(rv->msrs, this_cpu); else reg = &rv->reg; @@ -32,7 +31,7 @@ static void __wrmsr_on_cpu(void *info) int this_cpu = raw_smp_processor_id(); if (rv->msrs) - reg = &rv->msrs[this_cpu - rv->off]; + reg = per_cpu_ptr(rv->msrs, this_cpu); else reg = &rv->reg; @@ -80,7 +79,6 @@ static void __rwmsr_on_cpus(const struct cpumask *mask, u32 msr_no, memset(&rv, 0, sizeof(rv)); - rv.off = cpumask_first(mask); rv.msrs = msrs; rv.msr_no = msr_no; @@ -120,6 +118,26 @@ void wrmsr_on_cpus(const struct cpumask *mask, u32 msr_no, struct msr *msrs) } EXPORT_SYMBOL(wrmsr_on_cpus); +struct msr *msrs_alloc(void) +{ + struct msr *msrs = NULL; + + msrs = alloc_percpu(struct msr); + if (!msrs) { + pr_warning("%s: error allocating msrs\n", __func__); + return NULL; + } + + return msrs; +} +EXPORT_SYMBOL(msrs_alloc); + +void msrs_free(struct msr *msrs) +{ + free_percpu(msrs); +} +EXPORT_SYMBOL(msrs_free); + /* These "safe" variants are slower and should be used when the target MSR may not actually exist. */ static void __rdmsr_safe_on_cpu(void *info) diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 07bcc309cfda..c0f6198565eb 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -5,6 +5,8 @@ * 2008 Pekka Paalanen <pq@iki.fi> */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/list.h> #include <linux/rculist.h> #include <linux/spinlock.h> @@ -136,7 +138,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear) pte_t *pte = lookup_address(f->page, &level); if (!pte) { - pr_err("kmmio: no pte for page 0x%08lx\n", f->page); + pr_err("no pte for page 0x%08lx\n", f->page); return -1; } @@ -148,7 +150,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear) clear_pte_presence(pte, clear, &f->old_presence); break; default: - pr_err("kmmio: unexpected page level 0x%x.\n", level); + pr_err("unexpected page level 0x%x.\n", level); return -1; } @@ -170,13 +172,14 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear) static int arm_kmmio_fault_page(struct kmmio_fault_page *f) { int ret; - WARN_ONCE(f->armed, KERN_ERR "kmmio page already armed.\n"); + WARN_ONCE(f->armed, KERN_ERR pr_fmt("kmmio page already armed.\n")); if (f->armed) { - pr_warning("kmmio double-arm: page 0x%08lx, ref %d, old %d\n", - f->page, f->count, !!f->old_presence); + pr_warning("double-arm: page 0x%08lx, ref %d, old %d\n", + f->page, f->count, !!f->old_presence); } ret = clear_page_presence(f, true); - WARN_ONCE(ret < 0, KERN_ERR "kmmio arming 0x%08lx failed.\n", f->page); + WARN_ONCE(ret < 0, KERN_ERR pr_fmt("arming 0x%08lx failed.\n"), + f->page); f->armed = true; return ret; } @@ -240,24 +243,21 @@ int kmmio_handler(struct pt_regs *regs, unsigned long addr) * condition needs handling by do_page_fault(), the * page really not being present is the most common. */ - pr_debug("kmmio: secondary hit for 0x%08lx CPU %d.\n", - addr, smp_processor_id()); + pr_debug("secondary hit for 0x%08lx CPU %d.\n", + addr, smp_processor_id()); if (!faultpage->old_presence) - pr_info("kmmio: unexpected secondary hit for " - "address 0x%08lx on CPU %d.\n", addr, - smp_processor_id()); + pr_info("unexpected secondary hit for address 0x%08lx on CPU %d.\n", + addr, smp_processor_id()); } else { /* * Prevent overwriting already in-flight context. * This should not happen, let's hope disarming at * least prevents a panic. */ - pr_emerg("kmmio: recursive probe hit on CPU %d, " - "for address 0x%08lx. Ignoring.\n", - smp_processor_id(), addr); - pr_emerg("kmmio: previous hit was at 0x%08lx.\n", - ctx->addr); + pr_emerg("recursive probe hit on CPU %d, for address 0x%08lx. Ignoring.\n", + smp_processor_id(), addr); + pr_emerg("previous hit was at 0x%08lx.\n", ctx->addr); disarm_kmmio_fault_page(faultpage); } goto no_kmmio_ctx; @@ -316,8 +316,8 @@ static int post_kmmio_handler(unsigned long condition, struct pt_regs *regs) * something external causing them (f.e. using a debugger while * mmio tracing enabled), or erroneous behaviour */ - pr_warning("kmmio: unexpected debug trap on CPU %d.\n", - smp_processor_id()); + pr_warning("unexpected debug trap on CPU %d.\n", + smp_processor_id()); goto out; } @@ -425,7 +425,7 @@ int register_kmmio_probe(struct kmmio_probe *p) list_add_rcu(&p->list, &kmmio_probes); while (size < size_lim) { if (add_kmmio_fault_page(p->addr + size)) - pr_err("kmmio: Unable to set page fault.\n"); + pr_err("Unable to set page fault.\n"); size += PAGE_SIZE; } out: @@ -490,7 +490,7 @@ static void remove_kmmio_fault_pages(struct rcu_head *head) * 2. remove_kmmio_fault_pages() * Remove the pages from kmmio_page_table. * 3. rcu_free_kmmio_fault_pages() - * Actally free the kmmio_fault_page structs as with RCU. + * Actually free the kmmio_fault_page structs as with RCU. */ void unregister_kmmio_probe(struct kmmio_probe *p) { @@ -511,7 +511,7 @@ void unregister_kmmio_probe(struct kmmio_probe *p) drelease = kmalloc(sizeof(*drelease), GFP_ATOMIC); if (!drelease) { - pr_crit("kmmio: leaking kmmio_fault_page objects.\n"); + pr_crit("leaking kmmio_fault_page objects.\n"); return; } drelease->release_list = release_list; diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c index 132772a8ec57..34a3291ca103 100644 --- a/arch/x86/mm/mmio-mod.c +++ b/arch/x86/mm/mmio-mod.c @@ -19,6 +19,9 @@ * * Derived from the read-mod example from relay-examples by Tom Zanussi. */ + +#define pr_fmt(fmt) "mmiotrace: " fmt + #define DEBUG 1 #include <linux/module.h> @@ -36,8 +39,6 @@ #include "pf_in.h" -#define NAME "mmiotrace: " - struct trap_reason { unsigned long addr; unsigned long ip; @@ -96,17 +97,18 @@ static void print_pte(unsigned long address) pte_t *pte = lookup_address(address, &level); if (!pte) { - pr_err(NAME "Error in %s: no pte for page 0x%08lx\n", - __func__, address); + pr_err("Error in %s: no pte for page 0x%08lx\n", + __func__, address); return; } if (level == PG_LEVEL_2M) { - pr_emerg(NAME "4MB pages are not currently supported: " - "0x%08lx\n", address); + pr_emerg("4MB pages are not currently supported: 0x%08lx\n", + address); BUG(); } - pr_info(NAME "pte for 0x%lx: 0x%llx 0x%llx\n", address, + pr_info("pte for 0x%lx: 0x%llx 0x%llx\n", + address, (unsigned long long)pte_val(*pte), (unsigned long long)pte_val(*pte) & _PAGE_PRESENT); } @@ -118,22 +120,21 @@ static void print_pte(unsigned long address) static void die_kmmio_nesting_error(struct pt_regs *regs, unsigned long addr) { const struct trap_reason *my_reason = &get_cpu_var(pf_reason); - pr_emerg(NAME "unexpected fault for address: 0x%08lx, " - "last fault for address: 0x%08lx\n", - addr, my_reason->addr); + pr_emerg("unexpected fault for address: 0x%08lx, last fault for address: 0x%08lx\n", + addr, my_reason->addr); print_pte(addr); print_symbol(KERN_EMERG "faulting IP is at %s\n", regs->ip); print_symbol(KERN_EMERG "last faulting IP was at %s\n", my_reason->ip); #ifdef __i386__ pr_emerg("eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n", - regs->ax, regs->bx, regs->cx, regs->dx); + regs->ax, regs->bx, regs->cx, regs->dx); pr_emerg("esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n", - regs->si, regs->di, regs->bp, regs->sp); + regs->si, regs->di, regs->bp, regs->sp); #else pr_emerg("rax: %016lx rcx: %016lx rdx: %016lx\n", - regs->ax, regs->cx, regs->dx); + regs->ax, regs->cx, regs->dx); pr_emerg("rsi: %016lx rdi: %016lx rbp: %016lx rsp: %016lx\n", - regs->si, regs->di, regs->bp, regs->sp); + regs->si, regs->di, regs->bp, regs->sp); #endif put_cpu_var(pf_reason); BUG(); @@ -213,7 +214,7 @@ static void post(struct kmmio_probe *p, unsigned long condition, /* this should always return the active_trace count to 0 */ my_reason->active_traces--; if (my_reason->active_traces) { - pr_emerg(NAME "unexpected post handler"); + pr_emerg("unexpected post handler"); BUG(); } @@ -244,7 +245,7 @@ static void ioremap_trace_core(resource_size_t offset, unsigned long size, }; if (!trace) { - pr_err(NAME "kmalloc failed in ioremap\n"); + pr_err("kmalloc failed in ioremap\n"); return; } @@ -282,8 +283,8 @@ void mmiotrace_ioremap(resource_size_t offset, unsigned long size, if (!is_enabled()) /* recheck and proper locking in *_core() */ return; - pr_debug(NAME "ioremap_*(0x%llx, 0x%lx) = %p\n", - (unsigned long long)offset, size, addr); + pr_debug("ioremap_*(0x%llx, 0x%lx) = %p\n", + (unsigned long long)offset, size, addr); if ((filter_offset) && (offset != filter_offset)) return; ioremap_trace_core(offset, size, addr); @@ -301,7 +302,7 @@ static void iounmap_trace_core(volatile void __iomem *addr) struct remap_trace *tmp; struct remap_trace *found_trace = NULL; - pr_debug(NAME "Unmapping %p.\n", addr); + pr_debug("Unmapping %p.\n", addr); spin_lock_irq(&trace_lock); if (!is_enabled()) @@ -363,9 +364,8 @@ static void clear_trace_list(void) * Caller also ensures is_enabled() cannot change. */ list_for_each_entry(trace, &trace_list, list) { - pr_notice(NAME "purging non-iounmapped " - "trace @0x%08lx, size 0x%lx.\n", - trace->probe.addr, trace->probe.len); + pr_notice("purging non-iounmapped trace @0x%08lx, size 0x%lx.\n", + trace->probe.addr, trace->probe.len); if (!nommiotrace) unregister_kmmio_probe(&trace->probe); } @@ -387,7 +387,7 @@ static void enter_uniprocessor(void) if (downed_cpus == NULL && !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) { - pr_notice(NAME "Failed to allocate mask\n"); + pr_notice("Failed to allocate mask\n"); goto out; } @@ -395,20 +395,19 @@ static void enter_uniprocessor(void) cpumask_copy(downed_cpus, cpu_online_mask); cpumask_clear_cpu(cpumask_first(cpu_online_mask), downed_cpus); if (num_online_cpus() > 1) - pr_notice(NAME "Disabling non-boot CPUs...\n"); + pr_notice("Disabling non-boot CPUs...\n"); put_online_cpus(); for_each_cpu(cpu, downed_cpus) { err = cpu_down(cpu); if (!err) - pr_info(NAME "CPU%d is down.\n", cpu); + pr_info("CPU%d is down.\n", cpu); else - pr_err(NAME "Error taking CPU%d down: %d\n", cpu, err); + pr_err("Error taking CPU%d down: %d\n", cpu, err); } out: if (num_online_cpus() > 1) - pr_warning(NAME "multiple CPUs still online, " - "may miss events.\n"); + pr_warning("multiple CPUs still online, may miss events.\n"); } /* __ref because leave_uniprocessor calls cpu_up which is __cpuinit, @@ -420,13 +419,13 @@ static void __ref leave_uniprocessor(void) if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0) return; - pr_notice(NAME "Re-enabling CPUs...\n"); + pr_notice("Re-enabling CPUs...\n"); for_each_cpu(cpu, downed_cpus) { err = cpu_up(cpu); if (!err) - pr_info(NAME "enabled CPU%d.\n", cpu); + pr_info("enabled CPU%d.\n", cpu); else - pr_err(NAME "cannot re-enable CPU%d: %d\n", cpu, err); + pr_err("cannot re-enable CPU%d: %d\n", cpu, err); } } @@ -434,8 +433,8 @@ static void __ref leave_uniprocessor(void) static void enter_uniprocessor(void) { if (num_online_cpus() > 1) - pr_warning(NAME "multiple CPUs are online, may miss events. " - "Suggest booting with maxcpus=1 kernel argument.\n"); + pr_warning("multiple CPUs are online, may miss events. " + "Suggest booting with maxcpus=1 kernel argument.\n"); } static void leave_uniprocessor(void) @@ -450,13 +449,13 @@ void enable_mmiotrace(void) goto out; if (nommiotrace) - pr_info(NAME "MMIO tracing disabled.\n"); + pr_info("MMIO tracing disabled.\n"); kmmio_init(); enter_uniprocessor(); spin_lock_irq(&trace_lock); atomic_inc(&mmiotrace_enabled); spin_unlock_irq(&trace_lock); - pr_info(NAME "enabled.\n"); + pr_info("enabled.\n"); out: mutex_unlock(&mmiotrace_mutex); } @@ -475,7 +474,7 @@ void disable_mmiotrace(void) clear_trace_list(); /* guarantees: no more kmmio callbacks */ leave_uniprocessor(); kmmio_cleanup(); - pr_info(NAME "disabled.\n"); + pr_info("disabled.\n"); out: mutex_unlock(&mmiotrace_mutex); } diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 66b55d6e69ed..ae9648eb1c7f 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -704,9 +704,8 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, if (!range_is_allowed(pfn, size)) return 0; - if (file->f_flags & O_SYNC) { + if (file->f_flags & O_DSYNC) flags = _PAGE_CACHE_UC_MINUS; - } #ifdef CONFIG_X86_32 /* diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile index d49202e740ea..564b008a51c7 100644 --- a/arch/x86/pci/Makefile +++ b/arch/x86/pci/Makefile @@ -15,3 +15,8 @@ obj-$(CONFIG_X86_NUMAQ) += numaq_32.o obj-y += common.o early.o obj-y += amd_bus.o +obj-$(CONFIG_X86_64) += bus_numa.o intel_bus.o + +ifeq ($(CONFIG_PCI_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 1014eb4bfc37..959e548a7039 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -7,6 +7,7 @@ #include <asm/pci_x86.h> struct pci_root_info { + struct acpi_device *bridge; char *name; unsigned int res_num; struct resource *res; @@ -58,6 +59,30 @@ bus_has_transparent_bridge(struct pci_bus *bus) return false; } +static void +align_resource(struct acpi_device *bridge, struct resource *res) +{ + int align = (res->flags & IORESOURCE_MEM) ? 16 : 4; + + /* + * Host bridge windows are not BARs, but the decoders on the PCI side + * that claim this address space have starting alignment and length + * constraints, so fix any obvious BIOS goofs. + */ + if (!IS_ALIGNED(res->start, align)) { + dev_printk(KERN_DEBUG, &bridge->dev, + "host bridge window %pR invalid; " + "aligning start to %d-byte boundary\n", res, align); + res->start &= ~(align - 1); + } + if (!IS_ALIGNED(res->end + 1, align)) { + dev_printk(KERN_DEBUG, &bridge->dev, + "host bridge window %pR invalid; " + "aligning end to %d-byte boundary\n", res, align); + res->end = ALIGN(res->end, align) - 1; + } +} + static acpi_status setup_resource(struct acpi_resource *acpi_res, void *data) { @@ -91,11 +116,12 @@ setup_resource(struct acpi_resource *acpi_res, void *data) start = addr.minimum + addr.translation_offset; end = start + addr.address_length - 1; if (info->res_num >= max_root_bus_resources) { - printk(KERN_WARNING "PCI: Failed to allocate 0x%lx-0x%lx " - "from %s for %s due to _CRS returning more than " - "%d resource descriptors\n", (unsigned long) start, - (unsigned long) end, root->name, info->name, - max_root_bus_resources); + if (pci_probe & PCI_USE__CRS) + printk(KERN_WARNING "PCI: Failed to allocate " + "0x%lx-0x%lx from %s for %s due to _CRS " + "returning more than %d resource descriptors\n", + (unsigned long) start, (unsigned long) end, + root->name, info->name, max_root_bus_resources); return AE_OK; } @@ -105,14 +131,28 @@ setup_resource(struct acpi_resource *acpi_res, void *data) res->start = start; res->end = end; res->child = NULL; + align_resource(info->bridge, res); + + if (!(pci_probe & PCI_USE__CRS)) { + dev_printk(KERN_DEBUG, &info->bridge->dev, + "host bridge window %pR (ignored)\n", res); + return AE_OK; + } if (insert_resource(root, res)) { - printk(KERN_ERR "PCI: Failed to allocate 0x%lx-0x%lx " - "from %s for %s\n", (unsigned long) res->start, - (unsigned long) res->end, root->name, info->name); + dev_err(&info->bridge->dev, + "can't allocate host bridge window %pR\n", res); } else { info->bus->resource[info->res_num] = res; info->res_num++; + if (addr.translation_offset) + dev_info(&info->bridge->dev, "host bridge window %pR " + "(PCI address [%#llx-%#llx])\n", + res, res->start - addr.translation_offset, + res->end - addr.translation_offset); + else + dev_info(&info->bridge->dev, + "host bridge window %pR\n", res); } return AE_OK; } @@ -124,6 +164,12 @@ get_current_resources(struct acpi_device *device, int busnum, struct pci_root_info info; size_t size; + if (!(pci_probe & PCI_USE__CRS)) + dev_info(&device->dev, + "ignoring host bridge windows from ACPI; " + "boot with \"pci=use_crs\" to use them\n"); + + info.bridge = device; info.bus = bus; info.res_num = 0; acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource, @@ -163,8 +209,9 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do #endif if (domain && !pci_domains_supported) { - printk(KERN_WARNING "PCI: Multiple domains not supported " - "(dom %d, bus %d)\n", domain, busnum); + printk(KERN_WARNING "pci_bus %04x:%02x: " + "ignored (multiple domains not supported)\n", + domain, busnum); return NULL; } @@ -188,7 +235,8 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do */ sd = kzalloc(sizeof(*sd), GFP_KERNEL); if (!sd) { - printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); + printk(KERN_WARNING "pci_bus %04x:%02x: " + "ignored (out of memory)\n", domain, busnum); return NULL; } @@ -209,9 +257,7 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do } else { bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd); if (bus) { - if (pci_probe & PCI_USE__CRS) - get_current_resources(device, busnum, domain, - bus); + get_current_resources(device, busnum, domain, bus); bus->subordinate = pci_scan_child_bus(bus); } } diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c index 572ee9782f2a..95ecbd495955 100644 --- a/arch/x86/pci/amd_bus.c +++ b/arch/x86/pci/amd_bus.c @@ -6,10 +6,10 @@ #ifdef CONFIG_X86_64 #include <asm/pci-direct.h> -#include <asm/mpspec.h> -#include <linux/cpumask.h> #endif +#include "bus_numa.h" + /* * This discovers the pcibus <-> node mapping on AMD K8. * also get peer root bus resource for io,mmio @@ -17,67 +17,6 @@ #ifdef CONFIG_X86_64 -/* - * sub bus (transparent) will use entres from 3 to store extra from root, - * so need to make sure have enought slot there, increase PCI_BUS_NUM_RESOURCES? - */ -#define RES_NUM 16 -struct pci_root_info { - char name[12]; - unsigned int res_num; - struct resource res[RES_NUM]; - int bus_min; - int bus_max; - int node; - int link; -}; - -/* 4 at this time, it may become to 32 */ -#define PCI_ROOT_NR 4 -static int pci_root_num; -static struct pci_root_info pci_root_info[PCI_ROOT_NR]; - -void x86_pci_root_bus_res_quirks(struct pci_bus *b) -{ - int i; - int j; - struct pci_root_info *info; - - /* don't go for it if _CRS is used already */ - if (b->resource[0] != &ioport_resource || - b->resource[1] != &iomem_resource) - return; - - /* if only one root bus, don't need to anything */ - if (pci_root_num < 2) - return; - - for (i = 0; i < pci_root_num; i++) { - if (pci_root_info[i].bus_min == b->number) - break; - } - - if (i == pci_root_num) - return; - - printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", - b->number); - - info = &pci_root_info[i]; - for (j = 0; j < info->res_num; j++) { - struct resource *res; - struct resource *root; - - res = &info->res[j]; - b->resource[j] = res; - if (res->flags & IORESOURCE_IO) - root = &ioport_resource; - else - root = &iomem_resource; - insert_resource(root, res); - } -} - #define RANGE_NUM 16 struct res_range { @@ -130,52 +69,6 @@ static void __init update_range(struct res_range *range, size_t start, } } -static void __init update_res(struct pci_root_info *info, size_t start, - size_t end, unsigned long flags, int merge) -{ - int i; - struct resource *res; - - if (!merge) - goto addit; - - /* try to merge it with old one */ - for (i = 0; i < info->res_num; i++) { - size_t final_start, final_end; - size_t common_start, common_end; - - res = &info->res[i]; - if (res->flags != flags) - continue; - - common_start = max((size_t)res->start, start); - common_end = min((size_t)res->end, end); - if (common_start > common_end + 1) - continue; - - final_start = min((size_t)res->start, start); - final_end = max((size_t)res->end, end); - - res->start = final_start; - res->end = final_end; - return; - } - -addit: - - /* need to add that */ - if (info->res_num >= RES_NUM) - return; - - res = &info->res[info->res_num]; - res->name = info->name; - res->flags = flags; - res->start = start; - res->end = end; - res->child = NULL; - info->res_num++; -} - struct pci_hostbridge_probe { u32 bus; u32 slot; @@ -230,7 +123,6 @@ static int __init early_fill_mp_bus_info(void) int j; unsigned bus; unsigned slot; - int found; int node; int link; int def_node; @@ -247,7 +139,7 @@ static int __init early_fill_mp_bus_info(void) if (!early_pci_allowed()) return -1; - found = 0; + found_all_numa_early = 0; for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { u32 id; u16 device; @@ -261,12 +153,12 @@ static int __init early_fill_mp_bus_info(void) device = (id>>16) & 0xffff; if (pci_probes[i].vendor == vendor && pci_probes[i].device == device) { - found = 1; + found_all_numa_early = 1; break; } } - if (!found) + if (!found_all_numa_early) return 0; pci_root_num = 0; @@ -488,7 +380,7 @@ static int __init early_fill_mp_bus_info(void) info = &pci_root_info[i]; res_num = info->res_num; busnum = info->bus_min; - printk(KERN_DEBUG "bus: [%02x,%02x] on node %x link %x\n", + printk(KERN_DEBUG "bus: [%02x, %02x] on node %x link %x\n", info->bus_min, info->bus_max, info->node, info->link); for (j = 0; j < res_num; j++) { res = &info->res[j]; diff --git a/arch/x86/pci/bus_numa.c b/arch/x86/pci/bus_numa.c new file mode 100644 index 000000000000..145df00e0387 --- /dev/null +++ b/arch/x86/pci/bus_numa.c @@ -0,0 +1,101 @@ +#include <linux/init.h> +#include <linux/pci.h> + +#include "bus_numa.h" + +int pci_root_num; +struct pci_root_info pci_root_info[PCI_ROOT_NR]; +int found_all_numa_early; + +void x86_pci_root_bus_res_quirks(struct pci_bus *b) +{ + int i; + int j; + struct pci_root_info *info; + + /* don't go for it if _CRS is used already */ + if (b->resource[0] != &ioport_resource || + b->resource[1] != &iomem_resource) + return; + + if (!pci_root_num) + return; + + /* for amd, if only one root bus, don't need to do anything */ + if (pci_root_num < 2 && found_all_numa_early) + return; + + for (i = 0; i < pci_root_num; i++) { + if (pci_root_info[i].bus_min == b->number) + break; + } + + if (i == pci_root_num) + return; + + printk(KERN_DEBUG "PCI: peer root bus %02x res updated from pci conf\n", + b->number); + + info = &pci_root_info[i]; + for (j = 0; j < info->res_num; j++) { + struct resource *res; + struct resource *root; + + res = &info->res[j]; + b->resource[j] = res; + if (res->flags & IORESOURCE_IO) + root = &ioport_resource; + else + root = &iomem_resource; + insert_resource(root, res); + } +} + +void __init update_res(struct pci_root_info *info, size_t start, + size_t end, unsigned long flags, int merge) +{ + int i; + struct resource *res; + + if (start > end) + return; + + if (!merge) + goto addit; + + /* try to merge it with old one */ + for (i = 0; i < info->res_num; i++) { + size_t final_start, final_end; + size_t common_start, common_end; + + res = &info->res[i]; + if (res->flags != flags) + continue; + + common_start = max((size_t)res->start, start); + common_end = min((size_t)res->end, end); + if (common_start > common_end + 1) + continue; + + final_start = min((size_t)res->start, start); + final_end = max((size_t)res->end, end); + + res->start = final_start; + res->end = final_end; + return; + } + +addit: + + /* need to add that */ + if (info->res_num >= RES_NUM) + return; + + res = &info->res[info->res_num]; + res->name = info->name; + res->flags = flags; + res->start = start; + res->end = end; + res->child = NULL; + info->res_num++; +} diff --git a/arch/x86/pci/bus_numa.h b/arch/x86/pci/bus_numa.h new file mode 100644 index 000000000000..adbc23fe82ac --- /dev/null +++ b/arch/x86/pci/bus_numa.h @@ -0,0 +1,27 @@ +#ifdef CONFIG_X86_64 + +/* + * sub bus (transparent) will use entres from 3 to store extra from + * root, so need to make sure we have enough slot there, Should we + * increase PCI_BUS_NUM_RESOURCES? + */ +#define RES_NUM 16 +struct pci_root_info { + char name[12]; + unsigned int res_num; + struct resource res[RES_NUM]; + int bus_min; + int bus_max; + int node; + int link; +}; + +/* 4 at this time, it may become to 32 */ +#define PCI_ROOT_NR 4 +extern int pci_root_num; +extern struct pci_root_info pci_root_info[PCI_ROOT_NR]; +extern int found_all_numa_early; + +extern void update_res(struct pci_root_info *info, size_t start, + size_t end, unsigned long flags, int merge); +#endif diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 1331fcf26143..d2552c68e94d 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -410,8 +410,6 @@ struct pci_bus * __devinit pcibios_scan_root(int busnum) return bus; } -extern u8 pci_cache_line_size; - int __init pcibios_init(void) { struct cpuinfo_x86 *c = &boot_cpu_data; @@ -422,15 +420,19 @@ int __init pcibios_init(void) } /* - * Assume PCI cacheline size of 32 bytes for all x86s except K7/K8 - * and P4. It's also good for 386/486s (which actually have 16) + * Set PCI cacheline size to that of the CPU if the CPU has reported it. + * (For older CPUs that don't support cpuid, we se it to 32 bytes + * It's also good for 386/486s (which actually have 16) * as quite a few PCI devices do not support smaller values. */ - pci_cache_line_size = 32 >> 2; - if (c->x86 >= 6 && c->x86_vendor == X86_VENDOR_AMD) - pci_cache_line_size = 64 >> 2; /* K7 & K8 */ - else if (c->x86 > 6 && c->x86_vendor == X86_VENDOR_INTEL) - pci_cache_line_size = 128 >> 2; /* P4 */ + if (c->x86_clflush_size > 0) { + pci_dfl_cache_line_size = c->x86_clflush_size >> 2; + printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n", + pci_dfl_cache_line_size << 2); + } else { + pci_dfl_cache_line_size = 32 >> 2; + printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n"); + } pcibios_resource_survey(); diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c index aaf26ae58cd5..d1067d539bee 100644 --- a/arch/x86/pci/early.c +++ b/arch/x86/pci/early.c @@ -12,8 +12,6 @@ u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset) u32 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inl(0xcfc); - if (v != 0xffffffff) - pr_debug("%x reading 4 from %x: %x\n", slot, offset, v); return v; } @@ -22,7 +20,6 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset) u8 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inb(0xcfc + (offset&3)); - pr_debug("%x reading 1 from %x: %x\n", slot, offset, v); return v; } @@ -31,28 +28,24 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset) u16 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inw(0xcfc + (offset&2)); - pr_debug("%x reading 2 from %x: %x\n", slot, offset, v); return v; } void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outl(val, 0xcfc); } void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outb(val, 0xcfc + (offset&3)); } void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outw(val, 0xcfc + (offset&2)); } diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index b22d13b0c71d..5dc9e8c63fcd 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -129,7 +129,9 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) continue; if (!r->start || pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx); + dev_info(&dev->dev, + "can't reserve window %pR\n", + r); /* * Something is wrong with the region. * Invalidate the resource to prevent @@ -144,16 +146,29 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) } } +struct pci_check_idx_range { + int start; + int end; +}; + static void __init pcibios_allocate_resources(int pass) { struct pci_dev *dev = NULL; - int idx, disabled; + int idx, disabled, i; u16 command; struct resource *r; + struct pci_check_idx_range idx_range[] = { + { PCI_STD_RESOURCES, PCI_STD_RESOURCE_END }, +#ifdef CONFIG_PCI_IOV + { PCI_IOV_RESOURCES, PCI_IOV_RESOURCE_END }, +#endif + }; + for_each_pci_dev(dev) { pci_read_config_word(dev, PCI_COMMAND, &command); - for (idx = 0; idx < PCI_ROM_RESOURCE; idx++) { + for (i = 0; i < ARRAY_SIZE(idx_range); i++) + for (idx = idx_range[i].start; idx <= idx_range[i].end; idx++) { r = &dev->resource[idx]; if (r->parent) /* Already allocated */ continue; @@ -164,12 +179,12 @@ static void __init pcibios_allocate_resources(int pass) else disabled = !(command & PCI_COMMAND_MEMORY); if (pass == disabled) { - dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n", - (unsigned long long) r->start, - (unsigned long long) r->end, - r->flags, disabled, pass); + dev_dbg(&dev->dev, + "BAR %d: reserving %pr (d=%d, p=%d)\n", + idx, r, disabled, pass); if (pci_claim_resource(dev, idx) < 0) { - dev_info(&dev->dev, "BAR %d: can't allocate resource\n", idx); + dev_info(&dev->dev, + "can't reserve %pR\n", r); /* We'll assign a new address later */ r->end -= r->start; r->start = 0; @@ -182,7 +197,7 @@ static void __init pcibios_allocate_resources(int pass) /* Turn the ROM off, leave the resource region, * but keep it unregistered. */ u32 reg; - dev_dbg(&dev->dev, "disabling ROM\n"); + dev_dbg(&dev->dev, "disabling ROM %pR\n", r); r->flags &= ~IORESOURCE_ROM_ENABLE; pci_read_config_dword(dev, dev->rom_base_reg, ®); @@ -282,6 +297,15 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return -EINVAL; prot = pgprot_val(vma->vm_page_prot); + + /* + * Return error if pat is not enabled and write_combine is requested. + * Caller can followup with UC MINUS request and add a WC mtrr if there + * is a free mtrr slot. + */ + if (!pat_enabled && write_combine) + return -EINVAL; + if (pat_enabled && write_combine) prot |= _PAGE_CACHE_WC; else if (pat_enabled || boot_cpu_data.x86 > 3) diff --git a/arch/x86/pci/intel_bus.c b/arch/x86/pci/intel_bus.c new file mode 100644 index 000000000000..b7a55dc55d13 --- /dev/null +++ b/arch/x86/pci/intel_bus.c @@ -0,0 +1,90 @@ +/* + * to read io range from IOH pci conf, need to do it after mmconfig is there + */ + +#include <linux/delay.h> +#include <linux/dmi.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <asm/pci_x86.h> + +#include "bus_numa.h" + +static inline void print_ioh_resources(struct pci_root_info *info) +{ + int res_num; + int busnum; + int i; + + printk(KERN_DEBUG "IOH bus: [%02x, %02x]\n", + info->bus_min, info->bus_max); + res_num = info->res_num; + busnum = info->bus_min; + for (i = 0; i < res_num; i++) { + struct resource *res; + + res = &info->res[i]; + printk(KERN_DEBUG "IOH bus: %02x index %x %s: [%llx, %llx]\n", + busnum, i, + (res->flags & IORESOURCE_IO) ? "io port" : + "mmio", + res->start, res->end); + } +} + +#define IOH_LIO 0x108 +#define IOH_LMMIOL 0x10c +#define IOH_LMMIOH 0x110 +#define IOH_LMMIOH_BASEU 0x114 +#define IOH_LMMIOH_LIMITU 0x118 +#define IOH_LCFGBUS 0x11c + +static void __devinit pci_root_bus_res(struct pci_dev *dev) +{ + u16 word; + u32 dword; + struct pci_root_info *info; + u16 io_base, io_end; + u32 mmiol_base, mmiol_end; + u64 mmioh_base, mmioh_end; + int bus_base, bus_end; + + if (pci_root_num >= PCI_ROOT_NR) { + printk(KERN_DEBUG "intel_bus.c: PCI_ROOT_NR is too small\n"); + return; + } + + info = &pci_root_info[pci_root_num]; + pci_root_num++; + + pci_read_config_word(dev, IOH_LCFGBUS, &word); + bus_base = (word & 0xff); + bus_end = (word & 0xff00) >> 8; + sprintf(info->name, "PCI Bus #%02x", bus_base); + info->bus_min = bus_base; + info->bus_max = bus_end; + + pci_read_config_word(dev, IOH_LIO, &word); + io_base = (word & 0xf0) << (12 - 4); + io_end = (word & 0xf000) | 0xfff; + update_res(info, io_base, io_end, IORESOURCE_IO, 0); + + pci_read_config_dword(dev, IOH_LMMIOL, &dword); + mmiol_base = (dword & 0xff00) << (24 - 8); + mmiol_end = (dword & 0xff000000) | 0xffffff; + update_res(info, mmiol_base, mmiol_end, IORESOURCE_MEM, 0); + + pci_read_config_dword(dev, IOH_LMMIOH, &dword); + mmioh_base = ((u64)(dword & 0xfc00)) << (26 - 10); + mmioh_end = ((u64)(dword & 0xfc000000) | 0x3ffffff); + pci_read_config_dword(dev, IOH_LMMIOH_BASEU, &dword); + mmioh_base |= ((u64)(dword & 0x7ffff)) << 32; + pci_read_config_dword(dev, IOH_LMMIOH_LIMITU, &dword); + mmioh_end |= ((u64)(dword & 0x7ffff)) << 32; + update_res(info, mmioh_base, mmioh_end, IORESOURCE_MEM, 0); + + print_ioh_resources(info); +} + +/* intel IOH */ +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, pci_root_bus_res); diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 602c172d3bd5..b19d1e54201e 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -15,48 +15,98 @@ #include <linux/acpi.h> #include <linux/sfi_acpi.h> #include <linux/bitmap.h> -#include <linux/sort.h> +#include <linux/dmi.h> #include <asm/e820.h> #include <asm/pci_x86.h> #include <asm/acpi.h> #define PREFIX "PCI: " -/* aperture is up to 256MB but BIOS may reserve less */ -#define MMCONFIG_APER_MIN (2 * 1024*1024) -#define MMCONFIG_APER_MAX (256 * 1024*1024) - /* Indicate if the mmcfg resources have been placed into the resource table. */ static int __initdata pci_mmcfg_resources_inserted; -static __init int extend_mmcfg(int num) +LIST_HEAD(pci_mmcfg_list); + +static __init void pci_mmconfig_remove(struct pci_mmcfg_region *cfg) { - struct acpi_mcfg_allocation *new; - int new_num = pci_mmcfg_config_num + num; + if (cfg->res.parent) + release_resource(&cfg->res); + list_del(&cfg->list); + kfree(cfg); +} - new = kzalloc(sizeof(pci_mmcfg_config[0]) * new_num, GFP_KERNEL); - if (!new) - return -1; +static __init void free_all_mmcfg(void) +{ + struct pci_mmcfg_region *cfg, *tmp; - if (pci_mmcfg_config) { - memcpy(new, pci_mmcfg_config, - sizeof(pci_mmcfg_config[0]) * new_num); - kfree(pci_mmcfg_config); + pci_mmcfg_arch_free(); + list_for_each_entry_safe(cfg, tmp, &pci_mmcfg_list, list) + pci_mmconfig_remove(cfg); +} + +static __init void list_add_sorted(struct pci_mmcfg_region *new) +{ + struct pci_mmcfg_region *cfg; + + /* keep list sorted by segment and starting bus number */ + list_for_each_entry(cfg, &pci_mmcfg_list, list) { + if (cfg->segment > new->segment || + (cfg->segment == new->segment && + cfg->start_bus >= new->start_bus)) { + list_add_tail(&new->list, &cfg->list); + return; + } } - pci_mmcfg_config = new; + list_add_tail(&new->list, &pci_mmcfg_list); +} - return 0; +static __init struct pci_mmcfg_region *pci_mmconfig_add(int segment, int start, + int end, u64 addr) +{ + struct pci_mmcfg_region *new; + int num_buses; + struct resource *res; + + if (addr == 0) + return NULL; + + new = kzalloc(sizeof(*new), GFP_KERNEL); + if (!new) + return NULL; + + new->address = addr; + new->segment = segment; + new->start_bus = start; + new->end_bus = end; + + list_add_sorted(new); + + num_buses = end - start + 1; + res = &new->res; + res->start = addr + PCI_MMCFG_BUS_OFFSET(start); + res->end = addr + PCI_MMCFG_BUS_OFFSET(num_buses) - 1; + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + snprintf(new->name, PCI_MMCFG_RESOURCE_NAME_LEN, + "PCI MMCONFIG %04x [bus %02x-%02x]", segment, start, end); + res->name = new->name; + + printk(KERN_INFO PREFIX "MMCONFIG for domain %04x [bus %02x-%02x] at " + "%pR (base %#lx)\n", segment, start, end, &new->res, + (unsigned long) addr); + + return new; } -static __init void fill_one_mmcfg(u64 addr, int segment, int start, int end) +struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus) { - int i = pci_mmcfg_config_num; + struct pci_mmcfg_region *cfg; - pci_mmcfg_config_num++; - pci_mmcfg_config[i].address = addr; - pci_mmcfg_config[i].pci_segment = segment; - pci_mmcfg_config[i].start_bus_number = start; - pci_mmcfg_config[i].end_bus_number = end; + list_for_each_entry(cfg, &pci_mmcfg_list, list) + if (cfg->segment == segment && + cfg->start_bus <= bus && bus <= cfg->end_bus) + return cfg; + + return NULL; } static const char __init *pci_mmcfg_e7520(void) @@ -68,11 +118,9 @@ static const char __init *pci_mmcfg_e7520(void) if (win == 0x0000 || win == 0xf000) return NULL; - if (extend_mmcfg(1) == -1) + if (pci_mmconfig_add(0, 0, 255, win << 16) == NULL) return NULL; - fill_one_mmcfg(win << 16, 0, 0, 255); - return "Intel Corporation E7520 Memory Controller Hub"; } @@ -114,11 +162,9 @@ static const char __init *pci_mmcfg_intel_945(void) if ((pciexbar & mask) >= 0xf0000000U) return NULL; - if (extend_mmcfg(1) == -1) + if (pci_mmconfig_add(0, 0, (len >> 20) - 1, pciexbar & mask) == NULL) return NULL; - fill_one_mmcfg(pciexbar & mask, 0, 0, (len >> 20) - 1); - return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub"; } @@ -127,7 +173,7 @@ static const char __init *pci_mmcfg_amd_fam10h(void) u32 low, high, address; u64 base, msr; int i; - unsigned segnbits = 0, busnbits; + unsigned segnbits = 0, busnbits, end_bus; if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF)) return NULL; @@ -161,11 +207,13 @@ static const char __init *pci_mmcfg_amd_fam10h(void) busnbits = 8; } - if (extend_mmcfg(1 << segnbits) == -1) - return NULL; - + end_bus = (1 << busnbits) - 1; for (i = 0; i < (1 << segnbits); i++) - fill_one_mmcfg(base + (1<<28) * i, i, 0, (1 << busnbits) - 1); + if (pci_mmconfig_add(i, 0, end_bus, + base + (1<<28) * i) == NULL) { + free_all_mmcfg(); + return NULL; + } return "AMD Family 10h NB"; } @@ -190,7 +238,7 @@ static const char __init *pci_mmcfg_nvidia_mcp55(void) /* * do check if amd fam10h already took over */ - if (!acpi_disabled || pci_mmcfg_config_num || mcp55_checked) + if (!acpi_disabled || !list_empty(&pci_mmcfg_list) || mcp55_checked) return NULL; mcp55_checked = true; @@ -213,16 +261,14 @@ static const char __init *pci_mmcfg_nvidia_mcp55(void) if (!(extcfg & extcfg_enable_mask)) continue; - if (extend_mmcfg(1) == -1) - continue; - size_index = (extcfg & extcfg_size_mask) >> extcfg_size_shift; base = extcfg & extcfg_base_mask[size_index]; /* base could > 4G */ base <<= extcfg_base_lshift; start = (extcfg & extcfg_start_mask) >> extcfg_start_shift; end = start + extcfg_sizebus[size_index] - 1; - fill_one_mmcfg(base, 0, start, end); + if (pci_mmconfig_add(0, start, end, base) == NULL) + continue; mcp55_mmconf_found++; } @@ -253,45 +299,27 @@ static struct pci_mmcfg_hostbridge_probe pci_mmcfg_probes[] __initdata = { 0x0369, pci_mmcfg_nvidia_mcp55 }, }; -static int __init cmp_mmcfg(const void *x1, const void *x2) -{ - const typeof(pci_mmcfg_config[0]) *m1 = x1; - const typeof(pci_mmcfg_config[0]) *m2 = x2; - int start1, start2; - - start1 = m1->start_bus_number; - start2 = m2->start_bus_number; - - return start1 - start2; -} - static void __init pci_mmcfg_check_end_bus_number(void) { - int i; - typeof(pci_mmcfg_config[0]) *cfg, *cfgx; - - /* sort them at first */ - sort(pci_mmcfg_config, pci_mmcfg_config_num, - sizeof(pci_mmcfg_config[0]), cmp_mmcfg, NULL); + struct pci_mmcfg_region *cfg, *cfgx; /* last one*/ - if (pci_mmcfg_config_num > 0) { - i = pci_mmcfg_config_num - 1; - cfg = &pci_mmcfg_config[i]; - if (cfg->end_bus_number < cfg->start_bus_number) - cfg->end_bus_number = 255; - } + cfg = list_entry(pci_mmcfg_list.prev, typeof(*cfg), list); + if (cfg) + if (cfg->end_bus < cfg->start_bus) + cfg->end_bus = 255; - /* don't overlap please */ - for (i = 0; i < pci_mmcfg_config_num - 1; i++) { - cfg = &pci_mmcfg_config[i]; - cfgx = &pci_mmcfg_config[i+1]; + if (list_is_singular(&pci_mmcfg_list)) + return; - if (cfg->end_bus_number < cfg->start_bus_number) - cfg->end_bus_number = 255; + /* don't overlap please */ + list_for_each_entry(cfg, &pci_mmcfg_list, list) { + if (cfg->end_bus < cfg->start_bus) + cfg->end_bus = 255; - if (cfg->end_bus_number >= cfgx->start_bus_number) - cfg->end_bus_number = cfgx->start_bus_number - 1; + cfgx = list_entry(cfg->list.next, typeof(*cfg), list); + if (cfg != cfgx && cfg->end_bus >= cfgx->start_bus) + cfg->end_bus = cfgx->start_bus - 1; } } @@ -306,8 +334,7 @@ static int __init pci_mmcfg_check_hostbridge(void) if (!raw_pci_ops) return 0; - pci_mmcfg_config_num = 0; - pci_mmcfg_config = NULL; + free_all_mmcfg(); for (i = 0; i < ARRAY_SIZE(pci_mmcfg_probes); i++) { bus = pci_mmcfg_probes[i].bus; @@ -322,45 +349,22 @@ static int __init pci_mmcfg_check_hostbridge(void) name = pci_mmcfg_probes[i].probe(); if (name) - printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n", + printk(KERN_INFO PREFIX "%s with MMCONFIG support\n", name); } /* some end_bus_number is crazy, fix it */ pci_mmcfg_check_end_bus_number(); - return pci_mmcfg_config_num != 0; + return !list_empty(&pci_mmcfg_list); } static void __init pci_mmcfg_insert_resources(void) { -#define PCI_MMCFG_RESOURCE_NAME_LEN 24 - int i; - struct resource *res; - char *names; - unsigned num_buses; - - res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), - pci_mmcfg_config_num, GFP_KERNEL); - if (!res) { - printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); - return; - } + struct pci_mmcfg_region *cfg; - names = (void *)&res[pci_mmcfg_config_num]; - for (i = 0; i < pci_mmcfg_config_num; i++, res++) { - struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i]; - num_buses = cfg->end_bus_number - cfg->start_bus_number + 1; - res->name = names; - snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, - "PCI MMCONFIG %u [%02x-%02x]", cfg->pci_segment, - cfg->start_bus_number, cfg->end_bus_number); - res->start = cfg->address + (cfg->start_bus_number << 20); - res->end = res->start + (num_buses << 20) - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - insert_resource(&iomem_resource, res); - names += PCI_MMCFG_RESOURCE_NAME_LEN; - } + list_for_each_entry(cfg, &pci_mmcfg_list, list) + insert_resource(&iomem_resource, &cfg->res); /* Mark that the resources have been inserted. */ pci_mmcfg_resources_inserted = 1; @@ -437,11 +441,12 @@ static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used) typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type); static int __init is_mmconf_reserved(check_reserved_t is_reserved, - u64 addr, u64 size, int i, - typeof(pci_mmcfg_config[0]) *cfg, int with_e820) + struct pci_mmcfg_region *cfg, int with_e820) { + u64 addr = cfg->res.start; + u64 size = resource_size(&cfg->res); u64 old_size = size; - int valid = 0; + int valid = 0, num_buses; while (!is_reserved(addr, addr + size, E820_RESERVED)) { size >>= 1; @@ -450,19 +455,25 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved, } if (size >= (16UL<<20) || size == old_size) { - printk(KERN_NOTICE - "PCI: MCFG area at %Lx reserved in %s\n", - addr, with_e820?"E820":"ACPI motherboard resources"); + printk(KERN_INFO PREFIX "MMCONFIG at %pR reserved in %s\n", + &cfg->res, + with_e820 ? "E820" : "ACPI motherboard resources"); valid = 1; if (old_size != size) { - /* update end_bus_number */ - cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1); - printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx " - "segment %hu buses %u - %u\n", - i, (unsigned long)cfg->address, cfg->pci_segment, - (unsigned int)cfg->start_bus_number, - (unsigned int)cfg->end_bus_number); + /* update end_bus */ + cfg->end_bus = cfg->start_bus + ((size>>20) - 1); + num_buses = cfg->end_bus - cfg->start_bus + 1; + cfg->res.end = cfg->res.start + + PCI_MMCFG_BUS_OFFSET(num_buses) - 1; + snprintf(cfg->name, PCI_MMCFG_RESOURCE_NAME_LEN, + "PCI MMCONFIG %04x [bus %02x-%02x]", + cfg->segment, cfg->start_bus, cfg->end_bus); + printk(KERN_INFO PREFIX + "MMCONFIG for %04x [bus%02x-%02x] " + "at %pR (base %#lx) (size reduced!)\n", + cfg->segment, cfg->start_bus, cfg->end_bus, + &cfg->res, (unsigned long) cfg->address); } } @@ -471,45 +482,26 @@ static int __init is_mmconf_reserved(check_reserved_t is_reserved, static void __init pci_mmcfg_reject_broken(int early) { - typeof(pci_mmcfg_config[0]) *cfg; - int i; + struct pci_mmcfg_region *cfg; - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; - - for (i = 0; i < pci_mmcfg_config_num; i++) { + list_for_each_entry(cfg, &pci_mmcfg_list, list) { int valid = 0; - u64 addr, size; - - cfg = &pci_mmcfg_config[i]; - addr = cfg->start_bus_number; - addr <<= 20; - addr += cfg->address; - size = cfg->end_bus_number + 1 - cfg->start_bus_number; - size <<= 20; - printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx " - "segment %hu buses %u - %u\n", - i, (unsigned long)cfg->address, cfg->pci_segment, - (unsigned int)cfg->start_bus_number, - (unsigned int)cfg->end_bus_number); if (!early && !acpi_disabled) - valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0); + valid = is_mmconf_reserved(is_acpi_reserved, cfg, 0); if (valid) continue; if (!early) - printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" - " reserved in ACPI motherboard resources\n", - cfg->address); + printk(KERN_ERR FW_BUG PREFIX + "MMCONFIG at %pR not reserved in " + "ACPI motherboard resources\n", &cfg->res); /* Don't try to do this check unless configuration type 1 is available. how about type 2 ?*/ if (raw_pci_ops) - valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1); + valid = is_mmconf_reserved(e820_all_mapped, cfg, 1); if (!valid) goto reject; @@ -518,34 +510,41 @@ static void __init pci_mmcfg_reject_broken(int early) return; reject: - printk(KERN_INFO "PCI: Not using MMCONFIG.\n"); - pci_mmcfg_arch_free(); - kfree(pci_mmcfg_config); - pci_mmcfg_config = NULL; - pci_mmcfg_config_num = 0; + printk(KERN_INFO PREFIX "not using MMCONFIG\n"); + free_all_mmcfg(); } static int __initdata known_bridge; -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; +static int __init acpi_mcfg_check_entry(struct acpi_table_mcfg *mcfg, + struct acpi_mcfg_allocation *cfg) +{ + int year; -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_mcfg_allocation *pci_mmcfg_config; -int pci_mmcfg_config_num; + if (cfg->address < 0xFFFFFFFF) + return 0; -static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) -{ if (!strcmp(mcfg->header.oem_id, "SGI")) - acpi_mcfg_64bit_base_addr = TRUE; + return 0; - return 0; + if (mcfg->header.revision >= 1) { + if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && + year >= 2010) + return 0; + } + + printk(KERN_ERR PREFIX "MCFG region for %04x [bus %02x-%02x] at %#llx " + "is above 4GB, ignored\n", cfg->pci_segment, + cfg->start_bus_number, cfg->end_bus_number, cfg->address); + return -EINVAL; } static int __init pci_parse_mcfg(struct acpi_table_header *header) { struct acpi_table_mcfg *mcfg; + struct acpi_mcfg_allocation *cfg_table, *cfg; unsigned long i; - int config_size; + int entries; if (!header) return -EINVAL; @@ -553,38 +552,33 @@ static int __init pci_parse_mcfg(struct acpi_table_header *header) mcfg = (struct acpi_table_mcfg *)header; /* how many config structures do we have */ - pci_mmcfg_config_num = 0; + free_all_mmcfg(); + entries = 0; i = header->length - sizeof(struct acpi_table_mcfg); while (i >= sizeof(struct acpi_mcfg_allocation)) { - ++pci_mmcfg_config_num; + entries++; i -= sizeof(struct acpi_mcfg_allocation); }; - if (pci_mmcfg_config_num == 0) { + if (entries == 0) { printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); return -ENODEV; } - config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); - pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); - if (!pci_mmcfg_config) { - printk(KERN_WARNING PREFIX - "No memory for MCFG config tables\n"); - return -ENOMEM; - } - - memcpy(pci_mmcfg_config, &mcfg[1], config_size); - - acpi_mcfg_oem_check(mcfg); - - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && - !acpi_mcfg_64bit_base_addr) { - printk(KERN_ERR PREFIX - "MMCONFIG not in low 4GB of memory\n"); - kfree(pci_mmcfg_config); - pci_mmcfg_config_num = 0; + cfg_table = (struct acpi_mcfg_allocation *) &mcfg[1]; + for (i = 0; i < entries; i++) { + cfg = &cfg_table[i]; + if (acpi_mcfg_check_entry(mcfg, cfg)) { + free_all_mmcfg(); return -ENODEV; } + + if (pci_mmconfig_add(cfg->pci_segment, cfg->start_bus_number, + cfg->end_bus_number, cfg->address) == NULL) { + printk(KERN_WARNING PREFIX + "no memory for MCFG entries\n"); + free_all_mmcfg(); + return -ENOMEM; + } } return 0; @@ -614,9 +608,7 @@ static void __init __pci_mmcfg_init(int early) pci_mmcfg_reject_broken(early); - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) + if (list_empty(&pci_mmcfg_list)) return; if (pci_mmcfg_arch_init()) @@ -648,9 +640,7 @@ static int __init pci_mmcfg_late_insert_resources(void) */ if ((pci_mmcfg_resources_inserted == 1) || (pci_probe & PCI_PROBE_MMCONF) == 0 || - (pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) + list_empty(&pci_mmcfg_list)) return 1; /* diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c index f10a7e94a84c..90d5fd476ed4 100644 --- a/arch/x86/pci/mmconfig_32.c +++ b/arch/x86/pci/mmconfig_32.c @@ -27,18 +27,10 @@ static int mmcfg_last_accessed_cpu; */ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) { - struct acpi_mcfg_allocation *cfg; - int cfg_num; - - for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { - cfg = &pci_mmcfg_config[cfg_num]; - if (cfg->pci_segment == seg && - (cfg->start_bus_number <= bus) && - (cfg->end_bus_number >= bus)) - return cfg->address; - } + struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus); - /* Fall back to type 0 */ + if (cfg) + return cfg->address; return 0; } @@ -47,7 +39,7 @@ static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn) */ static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn) { - u32 dev_base = base | (bus << 20) | (devfn << 12); + u32 dev_base = base | PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12); int cpu = smp_processor_id(); if (dev_base != mmcfg_last_accessed_device || cpu != mmcfg_last_accessed_cpu) { diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c index 94349f8b2f96..e783841bd1d7 100644 --- a/arch/x86/pci/mmconfig_64.c +++ b/arch/x86/pci/mmconfig_64.c @@ -12,38 +12,15 @@ #include <asm/e820.h> #include <asm/pci_x86.h> -/* Static virtual mapping of the MMCONFIG aperture */ -struct mmcfg_virt { - struct acpi_mcfg_allocation *cfg; - char __iomem *virt; -}; -static struct mmcfg_virt *pci_mmcfg_virt; - -static char __iomem *get_virt(unsigned int seg, unsigned bus) -{ - struct acpi_mcfg_allocation *cfg; - int cfg_num; - - for (cfg_num = 0; cfg_num < pci_mmcfg_config_num; cfg_num++) { - cfg = pci_mmcfg_virt[cfg_num].cfg; - if (cfg->pci_segment == seg && - (cfg->start_bus_number <= bus) && - (cfg->end_bus_number >= bus)) - return pci_mmcfg_virt[cfg_num].virt; - } - - /* Fall back to type 0 */ - return NULL; -} +#define PREFIX "PCI: " static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned int devfn) { - char __iomem *addr; + struct pci_mmcfg_region *cfg = pci_mmconfig_lookup(seg, bus); - addr = get_virt(seg, bus); - if (!addr) - return NULL; - return addr + ((bus << 20) | (devfn << 12)); + if (cfg && cfg->virt) + return cfg->virt + (PCI_MMCFG_BUS_OFFSET(bus) | (devfn << 12)); + return NULL; } static int pci_mmcfg_read(unsigned int seg, unsigned int bus, @@ -109,42 +86,30 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; -static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg) +static void __iomem * __init mcfg_ioremap(struct pci_mmcfg_region *cfg) { void __iomem *addr; u64 start, size; + int num_buses; - start = cfg->start_bus_number; - start <<= 20; - start += cfg->address; - size = cfg->end_bus_number + 1 - cfg->start_bus_number; - size <<= 20; + start = cfg->address + PCI_MMCFG_BUS_OFFSET(cfg->start_bus); + num_buses = cfg->end_bus - cfg->start_bus + 1; + size = PCI_MMCFG_BUS_OFFSET(num_buses); addr = ioremap_nocache(start, size); - if (addr) { - printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n", - start, start + size - 1); - addr -= cfg->start_bus_number << 20; - } + if (addr) + addr -= PCI_MMCFG_BUS_OFFSET(cfg->start_bus); return addr; } int __init pci_mmcfg_arch_init(void) { - int i; - pci_mmcfg_virt = kzalloc(sizeof(*pci_mmcfg_virt) * - pci_mmcfg_config_num, GFP_KERNEL); - if (pci_mmcfg_virt == NULL) { - printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); - return 0; - } + struct pci_mmcfg_region *cfg; - for (i = 0; i < pci_mmcfg_config_num; ++i) { - pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i]; - pci_mmcfg_virt[i].virt = mcfg_ioremap(&pci_mmcfg_config[i]); - if (!pci_mmcfg_virt[i].virt) { - printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " - "segment %d\n", - pci_mmcfg_config[i].pci_segment); + list_for_each_entry(cfg, &pci_mmcfg_list, list) { + cfg->virt = mcfg_ioremap(cfg); + if (!cfg->virt) { + printk(KERN_ERR PREFIX "can't map MMCONFIG at %pR\n", + &cfg->res); pci_mmcfg_arch_free(); return 0; } @@ -155,19 +120,12 @@ int __init pci_mmcfg_arch_init(void) void __init pci_mmcfg_arch_free(void) { - int i; - - if (pci_mmcfg_virt == NULL) - return; + struct pci_mmcfg_region *cfg; - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if (pci_mmcfg_virt[i].virt) { - iounmap(pci_mmcfg_virt[i].virt + (pci_mmcfg_virt[i].cfg->start_bus_number << 20)); - pci_mmcfg_virt[i].virt = NULL; - pci_mmcfg_virt[i].cfg = NULL; + list_for_each_entry(cfg, &pci_mmcfg_list, list) { + if (cfg->virt) { + iounmap(cfg->virt + PCI_MMCFG_BUS_OFFSET(cfg->start_bus)); + cfg->virt = NULL; } } - - kfree(pci_mmcfg_virt); - pci_mmcfg_virt = NULL; } diff --git a/arch/x86/tools/test_get_len.c b/arch/x86/tools/test_get_len.c index d8214dc03fa7..bee8d6ac2691 100644 --- a/arch/x86/tools/test_get_len.c +++ b/arch/x86/tools/test_get_len.c @@ -113,7 +113,7 @@ int main(int argc, char **argv) char line[BUFSIZE], sym[BUFSIZE] = "<unknown>"; unsigned char insn_buf[16]; struct insn insn; - int insns = 0, c; + int insns = 0; int warnings = 0; parse_args(argc, argv); diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c462cea8ef09..2b26dd5930c6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -27,7 +27,9 @@ #include <linux/page-flags.h> #include <linux/highmem.h> #include <linux/console.h> +#include <linux/pci.h> +#include <xen/xen.h> #include <xen/interface/xen.h> #include <xen/interface/version.h> #include <xen/interface/physdev.h> @@ -138,24 +140,23 @@ static void xen_vcpu_setup(int cpu) */ void xen_vcpu_restore(void) { - if (have_vcpu_info_placement) { - int cpu; + int cpu; - for_each_online_cpu(cpu) { - bool other_cpu = (cpu != smp_processor_id()); + for_each_online_cpu(cpu) { + bool other_cpu = (cpu != smp_processor_id()); - if (other_cpu && - HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) - BUG(); + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_down, cpu, NULL)) + BUG(); - xen_vcpu_setup(cpu); + xen_setup_runstate_info(cpu); - if (other_cpu && - HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) - BUG(); - } + if (have_vcpu_info_placement) + xen_vcpu_setup(cpu); - BUG_ON(!have_vcpu_info_placement); + if (other_cpu && + HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL)) + BUG(); } } @@ -1176,10 +1177,16 @@ asmlinkage void __init xen_start_kernel(void) add_preferred_console("xenboot", 0, NULL); add_preferred_console("tty", 0, NULL); add_preferred_console("hvc", 0, NULL); + } else { + /* Make sure ACS will be enabled */ + pci_request_acs(); } + xen_raw_console_write("about to get started...\n"); + xen_setup_runstate_info(0); + /* Start the world */ #ifdef CONFIG_X86_32 i386_start_kernel(); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 3bf7b1d250ce..bf4cd6bfe959 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -185,7 +185,7 @@ static inline unsigned p2m_index(unsigned long pfn) } /* Build the parallel p2m_top_mfn structures */ -static void __init xen_build_mfn_list_list(void) +void xen_build_mfn_list_list(void) { unsigned pfn, idx; diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 738da0cb0d8b..563d20504988 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -35,10 +35,10 @@ cpumask_var_t xen_cpu_initialized_map; -static DEFINE_PER_CPU(int, resched_irq); -static DEFINE_PER_CPU(int, callfunc_irq); -static DEFINE_PER_CPU(int, callfuncsingle_irq); -static DEFINE_PER_CPU(int, debug_irq) = -1; +static DEFINE_PER_CPU(int, xen_resched_irq); +static DEFINE_PER_CPU(int, xen_callfunc_irq); +static DEFINE_PER_CPU(int, xen_callfuncsingle_irq); +static DEFINE_PER_CPU(int, xen_debug_irq) = -1; static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id); static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id); @@ -103,7 +103,7 @@ static int xen_smp_intr_init(unsigned int cpu) NULL); if (rc < 0) goto fail; - per_cpu(resched_irq, cpu) = rc; + per_cpu(xen_resched_irq, cpu) = rc; callfunc_name = kasprintf(GFP_KERNEL, "callfunc%d", cpu); rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_VECTOR, @@ -114,7 +114,7 @@ static int xen_smp_intr_init(unsigned int cpu) NULL); if (rc < 0) goto fail; - per_cpu(callfunc_irq, cpu) = rc; + per_cpu(xen_callfunc_irq, cpu) = rc; debug_name = kasprintf(GFP_KERNEL, "debug%d", cpu); rc = bind_virq_to_irqhandler(VIRQ_DEBUG, cpu, xen_debug_interrupt, @@ -122,7 +122,7 @@ static int xen_smp_intr_init(unsigned int cpu) debug_name, NULL); if (rc < 0) goto fail; - per_cpu(debug_irq, cpu) = rc; + per_cpu(xen_debug_irq, cpu) = rc; callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu); rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR, @@ -133,19 +133,20 @@ static int xen_smp_intr_init(unsigned int cpu) NULL); if (rc < 0) goto fail; - per_cpu(callfuncsingle_irq, cpu) = rc; + per_cpu(xen_callfuncsingle_irq, cpu) = rc; return 0; fail: - if (per_cpu(resched_irq, cpu) >= 0) - unbind_from_irqhandler(per_cpu(resched_irq, cpu), NULL); - if (per_cpu(callfunc_irq, cpu) >= 0) - unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL); - if (per_cpu(debug_irq, cpu) >= 0) - unbind_from_irqhandler(per_cpu(debug_irq, cpu), NULL); - if (per_cpu(callfuncsingle_irq, cpu) >= 0) - unbind_from_irqhandler(per_cpu(callfuncsingle_irq, cpu), NULL); + if (per_cpu(xen_resched_irq, cpu) >= 0) + unbind_from_irqhandler(per_cpu(xen_resched_irq, cpu), NULL); + if (per_cpu(xen_callfunc_irq, cpu) >= 0) + unbind_from_irqhandler(per_cpu(xen_callfunc_irq, cpu), NULL); + if (per_cpu(xen_debug_irq, cpu) >= 0) + unbind_from_irqhandler(per_cpu(xen_debug_irq, cpu), NULL); + if (per_cpu(xen_callfuncsingle_irq, cpu) >= 0) + unbind_from_irqhandler(per_cpu(xen_callfuncsingle_irq, cpu), + NULL); return rc; } @@ -295,6 +296,7 @@ static int __cpuinit xen_cpu_up(unsigned int cpu) (unsigned long)task_stack_page(idle) - KERNEL_STACK_OFFSET + THREAD_SIZE; #endif + xen_setup_runstate_info(cpu); xen_setup_timer(cpu); xen_init_lock_cpu(cpu); @@ -348,10 +350,10 @@ static void xen_cpu_die(unsigned int cpu) current->state = TASK_UNINTERRUPTIBLE; schedule_timeout(HZ/10); } - unbind_from_irqhandler(per_cpu(resched_irq, cpu), NULL); - unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL); - unbind_from_irqhandler(per_cpu(debug_irq, cpu), NULL); - unbind_from_irqhandler(per_cpu(callfuncsingle_irq, cpu), NULL); + unbind_from_irqhandler(per_cpu(xen_resched_irq, cpu), NULL); + unbind_from_irqhandler(per_cpu(xen_callfunc_irq, cpu), NULL); + unbind_from_irqhandler(per_cpu(xen_debug_irq, cpu), NULL); + unbind_from_irqhandler(per_cpu(xen_callfuncsingle_irq, cpu), NULL); xen_uninit_lock_cpu(cpu); xen_teardown_timer(cpu); diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 95be7b434724..987267f79bf5 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -1,4 +1,5 @@ #include <linux/types.h> +#include <linux/clockchips.h> #include <xen/interface/xen.h> #include <xen/grant_table.h> @@ -27,6 +28,8 @@ void xen_pre_suspend(void) void xen_post_suspend(int suspend_cancelled) { + xen_build_mfn_list_list(); + xen_setup_shared_info(); if (suspend_cancelled) { @@ -44,7 +47,19 @@ void xen_post_suspend(int suspend_cancelled) } +static void xen_vcpu_notify_restore(void *data) +{ + unsigned long reason = (unsigned long)data; + + /* Boot processor notified via generic timekeeping_resume() */ + if ( smp_processor_id() == 0) + return; + + clockevents_notify(reason, NULL); +} + void xen_arch_resume(void) { - /* nothing */ + smp_call_function(xen_vcpu_notify_restore, + (void *)CLOCK_EVT_NOTIFY_RESUME, 1); } diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 0a5aa44299a5..0d3f07cd1b5f 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -31,14 +31,14 @@ #define NS_PER_TICK (1000000000LL / HZ) /* runstate info updated by Xen */ -static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate); +static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate); /* snapshots of runstate info */ -static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate_snapshot); +static DEFINE_PER_CPU(struct vcpu_runstate_info, xen_runstate_snapshot); /* unused ns of stolen and blocked time */ -static DEFINE_PER_CPU(u64, residual_stolen); -static DEFINE_PER_CPU(u64, residual_blocked); +static DEFINE_PER_CPU(u64, xen_residual_stolen); +static DEFINE_PER_CPU(u64, xen_residual_blocked); /* return an consistent snapshot of 64-bit time/counter value */ static u64 get64(const u64 *p) @@ -79,7 +79,7 @@ static void get_runstate_snapshot(struct vcpu_runstate_info *res) BUG_ON(preemptible()); - state = &__get_cpu_var(runstate); + state = &__get_cpu_var(xen_runstate); /* * The runstate info is always updated by the hypervisor on @@ -97,14 +97,14 @@ static void get_runstate_snapshot(struct vcpu_runstate_info *res) /* return true when a vcpu could run but has no real cpu to run on */ bool xen_vcpu_stolen(int vcpu) { - return per_cpu(runstate, vcpu).state == RUNSTATE_runnable; + return per_cpu(xen_runstate, vcpu).state == RUNSTATE_runnable; } -static void setup_runstate_info(int cpu) +void xen_setup_runstate_info(int cpu) { struct vcpu_register_runstate_memory_area area; - area.addr.v = &per_cpu(runstate, cpu); + area.addr.v = &per_cpu(xen_runstate, cpu); if (HYPERVISOR_vcpu_op(VCPUOP_register_runstate_memory_area, cpu, &area)) @@ -122,7 +122,7 @@ static void do_stolen_accounting(void) WARN_ON(state.state != RUNSTATE_running); - snap = &__get_cpu_var(runstate_snapshot); + snap = &__get_cpu_var(xen_runstate_snapshot); /* work out how much time the VCPU has not been runn*ing* */ blocked = state.time[RUNSTATE_blocked] - snap->time[RUNSTATE_blocked]; @@ -133,24 +133,24 @@ static void do_stolen_accounting(void) /* Add the appropriate number of ticks of stolen time, including any left-overs from last time. */ - stolen = runnable + offline + __get_cpu_var(residual_stolen); + stolen = runnable + offline + __get_cpu_var(xen_residual_stolen); if (stolen < 0) stolen = 0; ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen); - __get_cpu_var(residual_stolen) = stolen; + __get_cpu_var(xen_residual_stolen) = stolen; account_steal_ticks(ticks); /* Add the appropriate number of ticks of blocked time, including any left-overs from last time. */ - blocked += __get_cpu_var(residual_blocked); + blocked += __get_cpu_var(xen_residual_blocked); if (blocked < 0) blocked = 0; ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked); - __get_cpu_var(residual_blocked) = blocked; + __get_cpu_var(xen_residual_blocked) = blocked; account_idle_ticks(ticks); } @@ -434,7 +434,7 @@ void xen_setup_timer(int cpu) name = "<timer kasprintf failed>"; irq = bind_virq_to_irqhandler(VIRQ_TIMER, cpu, xen_timer_interrupt, - IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING, + IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING|IRQF_TIMER, name, NULL); evt = &per_cpu(xen_clock_events, cpu); @@ -442,8 +442,6 @@ void xen_setup_timer(int cpu) evt->cpumask = cpumask_of(cpu); evt->irq = irq; - - setup_runstate_info(cpu); } void xen_teardown_timer(int cpu) @@ -494,6 +492,7 @@ __init void xen_time_init(void) setup_force_cpu_cap(X86_FEATURE_TSC); + xen_setup_runstate_info(cpu); xen_setup_timer(cpu); xen_setup_cpu_clockevents(); } diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S index 02f496a8dbaa..53adefda4275 100644 --- a/arch/x86/xen/xen-asm_64.S +++ b/arch/x86/xen/xen-asm_64.S @@ -96,7 +96,7 @@ ENTRY(xen_sysret32) pushq $__USER32_CS pushq %rcx - pushq $VGCF_in_syscall + pushq $0 1: jmp hypercall_iret ENDPATCH(xen_sysret32) RELOC(xen_sysret32, 1b+1) @@ -151,7 +151,7 @@ ENTRY(xen_syscall32_target) ENTRY(xen_sysenter_target) lea 16(%rsp), %rsp /* strip %rcx, %r11 */ mov $-ENOSYS, %rax - pushq $VGCF_in_syscall + pushq $0 jmp hypercall_iret ENDPROC(xen_syscall32_target) ENDPROC(xen_sysenter_target) diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 355fa6b99c9c..f9153a300bce 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -25,6 +25,7 @@ extern struct shared_info *HYPERVISOR_shared_info; void xen_setup_mfn_list_list(void); void xen_setup_shared_info(void); +void xen_build_mfn_list_list(void); void xen_setup_machphys_mapping(void); pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn); void xen_ident_map_ISA(void); @@ -41,6 +42,7 @@ void __init xen_build_dynamic_phys_to_machine(void); void xen_init_irq_ops(void); void xen_setup_timer(int cpu); +void xen_setup_runstate_info(int cpu); void xen_teardown_timer(int cpu); cycle_t xen_clocksource_read(void); void xen_setup_cpu_clockevents(void); diff --git a/arch/xtensa/include/asm/syscall.h b/arch/xtensa/include/asm/syscall.h index 05cebf8f62b1..4352dbe1186a 100644 --- a/arch/xtensa/include/asm/syscall.h +++ b/arch/xtensa/include/asm/syscall.h @@ -13,8 +13,6 @@ struct sigaction; asmlinkage long xtensa_execve(char*, char**, char**, struct pt_regs*); asmlinkage long xtensa_clone(unsigned long, unsigned long, struct pt_regs*); asmlinkage long xtensa_pipe(int __user *); -asmlinkage long xtensa_mmap2(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long, unsigned long); asmlinkage long xtensa_ptrace(long, long, long, long); asmlinkage long xtensa_sigreturn(struct pt_regs*); asmlinkage long xtensa_rt_sigreturn(struct pt_regs*); diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index 4e55dc763021..fbf318b3af3e 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -189,7 +189,7 @@ __SYSCALL( 79, sys_fremovexattr, 2) /* File Map / Shared Memory Operations */ #define __NR_mmap2 80 -__SYSCALL( 80, xtensa_mmap2, 6) +__SYSCALL( 80, sys_mmap_pgoff, 6) #define __NR_munmap 81 __SYSCALL( 81, sys_munmap, 2) #define __NR_mprotect 82 diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c index ac15ecbdf919..1e67bab775c1 100644 --- a/arch/xtensa/kernel/syscall.c +++ b/arch/xtensa/kernel/syscall.c @@ -57,31 +57,6 @@ asmlinkage long xtensa_pipe(int __user *userfds) return error; } - -asmlinkage long xtensa_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - int error = -EBADF; - struct file * file = NULL; - - flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); - if (!(flags & MAP_ANONYMOUS)) { - file = fget(fd); - if (!file) - goto out; - } - - down_write(¤t->mm->mmap_sem); - error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff); - up_write(¤t->mm->mmap_sem); - - if (file) - fput(file); -out: - return error; -} - asmlinkage long xtensa_shmat(int shmid, char __user *shmaddr, int shmflg) { unsigned long ret; diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c index 4c559cf7da2d..e60a1f57022f 100644 --- a/arch/xtensa/platforms/iss/console.c +++ b/arch/xtensa/platforms/iss/console.c @@ -196,7 +196,7 @@ static const struct file_operations rs_proc_fops = { .release = single_release, }; -static struct tty_operations serial_ops = { +static const struct tty_operations serial_ops = { .open = rs_open, .close = rs_close, .write = rs_write, |